diff options
author | Rajkumar Manoharan <rmanohar@qca.qualcomm.com> | 2011-10-13 11:00:41 +0530 |
---|---|---|
committer | John W. Linville <linville@tuxdriver.com> | 2011-10-14 14:48:22 -0400 |
commit | 324c74ad64c7528a9cf243455723d5ed57238e15 (patch) | |
tree | 1efd8d607d7908cf697f8e1fbe46d3b9921a466f /drivers/net/wireless/ath/ath9k | |
parent | 1aef40b82c48d028d92e811c7f7dc5a0dbf9fa9a (diff) |
ath9k_hw: Add radio retention support for AR9480
Supported calibrations of radio retention table (RTT) are
- DC offset
- Filter
- Peak detect
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/ath/ath9k')
-rw-r--r-- | drivers/net/wireless/ath/ath9k/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath9k/ar9003_calib.c | 115 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath9k/ar9003_phy.h | 20 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath9k/ar9003_rtt.c | 153 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath9k/ar9003_rtt.h | 28 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath9k/hw.c | 4 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath9k/hw.h | 9 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath9k/reg.h | 1 |
8 files changed, 316 insertions, 15 deletions
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile index 05a6fade7b1..36ed3c46fec 100644 --- a/drivers/net/wireless/ath/ath9k/Makefile +++ b/drivers/net/wireless/ath/ath9k/Makefile @@ -21,6 +21,7 @@ ath9k_hw-y:= \ ar5008_phy.o \ ar9002_calib.o \ ar9003_calib.o \ + ar9003_rtt.o \ calib.o \ eeprom.o \ eeprom_def.o \ diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 3506e7bd36e..47f140ce00d 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -17,6 +17,7 @@ #include "hw.h" #include "hw-ops.h" #include "ar9003_phy.h" +#include "ar9003_rtt.h" #define MAX_MEASUREMENT MAX_IQCAL_MEASUREMENT #define MAX_MAG_DELTA 11 @@ -900,25 +901,81 @@ static void ar9003_hw_tx_iq_cal_reload(struct ath_hw *ah) AR_PHY_RX_IQCAL_CORR_B0_LOOPBACK_IQCORR_EN, 0x1); } +static bool ar9003_hw_rtt_restore(struct ath_hw *ah, struct ath9k_channel *chan) +{ + struct ath9k_rtt_hist *hist; + u32 *table; + int i; + bool restore; + + if (!(ah->caps.hw_caps & ATH9K_HW_CAP_RTT) || !ah->caldata) + return false; + + hist = &ah->caldata->rtt_hist; + ar9003_hw_rtt_enable(ah); + ar9003_hw_rtt_set_mask(ah, 0x10); + for (i = 0; i < AR9300_MAX_CHAINS; i++) { + if (!(ah->rxchainmask & (1 << i))) + continue; + table = &hist->table[i][hist->num_readings][0]; + ar9003_hw_rtt_load_hist(ah, i, table); + } + restore = ar9003_hw_rtt_force_restore(ah); + ar9003_hw_rtt_disable(ah); + + return restore; +} + static bool ar9003_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan) { struct ath_common *common = ath9k_hw_common(ah); struct ath9k_hw_cal_data *caldata = ah->caldata; bool txiqcal_done = false, txclcal_done = false; - bool is_reusable = true; + bool is_reusable = true, status = true; + bool run_rtt_cal = false, run_agc_cal; + bool rtt = !!(ah->caps.hw_caps & ATH9K_HW_CAP_RTT); + u32 agc_ctrl = 0, agc_supp_cals = AR_PHY_AGC_CONTROL_OFFSET_CAL | + AR_PHY_AGC_CONTROL_FLTR_CAL | + AR_PHY_AGC_CONTROL_PKDET_CAL; int i, j; u32 cl_idx[AR9300_MAX_CHAINS] = { AR_PHY_CL_TAB_0, AR_PHY_CL_TAB_1, AR_PHY_CL_TAB_2 }; + if (rtt) { + if (!ar9003_hw_rtt_restore(ah, chan)) + run_rtt_cal = true; + + ath_dbg(common, ATH_DBG_CALIBRATE, "RTT restore %s\n", + run_rtt_cal ? "failed" : "succeed"); + } + run_agc_cal = run_rtt_cal; + + if (run_rtt_cal) { + ar9003_hw_rtt_enable(ah); + ar9003_hw_rtt_set_mask(ah, 0x00); + ar9003_hw_rtt_clear_hist(ah); + } + + if (rtt && !run_rtt_cal) { + agc_ctrl = REG_READ(ah, AR_PHY_AGC_CONTROL); + agc_supp_cals &= agc_ctrl; + agc_ctrl &= ~(AR_PHY_AGC_CONTROL_OFFSET_CAL | + AR_PHY_AGC_CONTROL_FLTR_CAL | + AR_PHY_AGC_CONTROL_PKDET_CAL); + REG_WRITE(ah, AR_PHY_AGC_CONTROL, agc_ctrl); + } + if (ah->enabled_cals & TX_CL_CAL) { if (caldata && caldata->done_txclcal_once) REG_CLR_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_CL_CAL_ENABLE); - else + else { REG_SET_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_CL_CAL_ENABLE); + run_agc_cal = true; + } } if (!(ah->enabled_cals & TX_IQ_CAL)) @@ -940,25 +997,41 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, else REG_CLR_BIT(ah, AR_PHY_TX_IQCAL_CONTROL_0, AR_PHY_TX_IQCAL_CONTROL_0_ENABLE_TXIQ_CAL); - txiqcal_done = true; + txiqcal_done = run_agc_cal = true; goto skip_tx_iqcal; - } + } else if (caldata && !caldata->done_txiqcal_once) + run_agc_cal = true; + txiqcal_done = ar9003_hw_tx_iq_cal_run(ah); REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS); udelay(5); REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); skip_tx_iqcal: - /* Calibrate the AGC */ - REG_WRITE(ah, AR_PHY_AGC_CONTROL, - REG_READ(ah, AR_PHY_AGC_CONTROL) | - AR_PHY_AGC_CONTROL_CAL); - - /* Poll for offset calibration complete */ - if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL, - 0, AH_WAIT_TIMEOUT)) { + + if (run_agc_cal) { + /* Calibrate the AGC */ + REG_WRITE(ah, AR_PHY_AGC_CONTROL, + REG_READ(ah, AR_PHY_AGC_CONTROL) | + AR_PHY_AGC_CONTROL_CAL); + + /* Poll for offset calibration complete */ + status = ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, + AR_PHY_AGC_CONTROL_CAL, + 0, AH_WAIT_TIMEOUT); + } + if (rtt && !run_rtt_cal) { + agc_ctrl |= agc_supp_cals; + REG_WRITE(ah, AR_PHY_AGC_CONTROL, agc_ctrl); + } + + if (!status) { + if (run_rtt_cal) + ar9003_hw_rtt_disable(ah); + ath_dbg(common, ATH_DBG_CALIBRATE, - "offset calibration failed to complete in 1ms; noisy environment?\n"); + "offset calibration failed to complete in 1ms;" + "noisy environment?\n"); return false; } @@ -993,6 +1066,22 @@ skip_tx_iqcal: } #undef CL_TAB_ENTRY + if (run_rtt_cal && caldata) { + struct ath9k_rtt_hist *hist = &caldata->rtt_hist; + if (is_reusable && (hist->num_readings < RTT_HIST_MAX)) { + u32 *table; + + for (i = 0; i < AR9300_MAX_CHAINS; i++) { + if (!(ah->rxchainmask & (1 << i))) + continue; + table = &hist->table[i][hist->num_readings][0]; + ar9003_hw_rtt_fill_hist(ah, i, table); + } + } + + ar9003_hw_rtt_disable(ah); + } + ath9k_hw_loadnf(ah, chan); ath9k_hw_start_nfcal(ah, true); diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h index 64e9bea9372..9fe6fbeb66d 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h @@ -584,8 +584,6 @@ (AR_SREV_9485(ah) ? \ 0x3d0 : 0x450) + ((_i) << 2)) #define AR_PHY_RTT_CTRL (AR_SM_BASE + 0x380) -#define AR_PHY_RTT_TABLE_SW_INTF_B (AR_SM_BASE + 0x384) -#define AR_PHY_RTT_TABLE_SW_INTF_1_B0 (AR_SM_BASE + 0x388) #define AR_PHY_WATCHDOG_STATUS (AR_SM_BASE + 0x5c0) #define AR_PHY_WATCHDOG_CTL_1 (AR_SM_BASE + 0x5c4) @@ -825,6 +823,20 @@ #define AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT 0x01000000 #define AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT_S 24 #define AR_PHY_CHANNEL_STATUS_RX_CLEAR 0x00000004 +#define AR_PHY_RTT_CTRL_ENA_RADIO_RETENTION 0x00000001 +#define AR_PHY_RTT_CTRL_ENA_RADIO_RETENTION_S 0 +#define AR_PHY_RTT_CTRL_RESTORE_MASK 0x0000007E +#define AR_PHY_RTT_CTRL_RESTORE_MASK_S 1 +#define AR_PHY_RTT_CTRL_FORCE_RADIO_RESTORE 0x00000080 +#define AR_PHY_RTT_CTRL_FORCE_RADIO_RESTORE_S 7 +#define AR_PHY_RTT_SW_RTT_TABLE_ACCESS 0x00000001 +#define AR_PHY_RTT_SW_RTT_TABLE_ACCESS_S 0 +#define AR_PHY_RTT_SW_RTT_TABLE_WRITE 0x00000002 +#define AR_PHY_RTT_SW_RTT_TABLE_WRITE_S 1 +#define AR_PHY_RTT_SW_RTT_TABLE_ADDR 0x0000001C +#define AR_PHY_RTT_SW_RTT_TABLE_ADDR_S 2 +#define AR_PHY_RTT_SW_RTT_TABLE_DATA 0xFFFFFFF0 +#define AR_PHY_RTT_SW_RTT_TABLE_DATA_S 4 #define AR_PHY_TX_IQCAL_CONTROL_0_ENABLE_TXIQ_CAL 0x80000000 #define AR_PHY_TX_IQCAL_CONTROL_0_ENABLE_TXIQ_CAL_S 31 #define AR_PHY_TX_IQCAL_CONTROL_1_IQCORR_I_Q_COFF_DELPT 0x01fc0000 @@ -919,6 +931,10 @@ #define AR_PHY_AIC_SRAM_ADDR_B1 (AR_SM1_BASE + 0x5f0) #define AR_PHY_AIC_SRAM_DATA_B1 (AR_SM1_BASE + 0x5f4) +#define AR_PHY_RTT_TABLE_SW_INTF_B(i) (0x384 + (i) ? \ + AR_SM1_BASE : AR_SM_BASE) +#define AR_PHY_RTT_TABLE_SW_INTF_1_B(i) (0x388 + (i) ? \ + AR_SM1_BASE : AR_SM_BASE) /* * Channel 2 Register Map */ diff --git a/drivers/net/wireless/ath/ath9k/ar9003_rtt.c b/drivers/net/wireless/ath/ath9k/ar9003_rtt.c new file mode 100644 index 00000000000..48803ee9c0d --- /dev/null +++ b/drivers/net/wireless/ath/ath9k/ar9003_rtt.c @@ -0,0 +1,153 @@ +/* + * Copyright (c) 2010-2011 Atheros Communications Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "hw.h" +#include "ar9003_phy.h" + +#define RTT_RESTORE_TIMEOUT 1000 +#define RTT_ACCESS_TIMEOUT 100 +#define RTT_BAD_VALUE 0x0bad0bad + +/* + * RTT (Radio Retention Table) hardware implementation information + * + * There is an internal table (i.e. the rtt) for each chain (or bank). + * Each table contains 6 entries and each entry is corresponding to + * a specific calibration parameter as depicted below. + * 0~2 - DC offset DAC calibration: loop, low, high (offsetI/Q_...) + * 3 - Filter cal (filterfc) + * 4 - RX gain settings + * 5 - Peak detector offset calibration (agc_caldac) + */ + +void ar9003_hw_rtt_enable(struct ath_hw *ah) +{ + REG_WRITE(ah, AR_PHY_RTT_CTRL, 1); +} + +void ar9003_hw_rtt_disable(struct ath_hw *ah) +{ + REG_WRITE(ah, AR_PHY_RTT_CTRL, 0); +} + +void ar9003_hw_rtt_set_mask(struct ath_hw *ah, u32 rtt_mask) +{ + REG_RMW_FIELD(ah, AR_PHY_RTT_CTRL, + AR_PHY_RTT_CTRL_RESTORE_MASK, rtt_mask); +} + +bool ar9003_hw_rtt_force_restore(struct ath_hw *ah) +{ + if (!ath9k_hw_wait(ah, AR_PHY_RTT_CTRL, + AR_PHY_RTT_CTRL_FORCE_RADIO_RESTORE, + 0, RTT_RESTORE_TIMEOUT)) + return false; + + REG_RMW_FIELD(ah, AR_PHY_RTT_CTRL, + AR_PHY_RTT_CTRL_FORCE_RADIO_RESTORE, 1); + + if (!ath9k_hw_wait(ah, AR_PHY_RTT_CTRL, + AR_PHY_RTT_CTRL_FORCE_RADIO_RESTORE, + 0, RTT_RESTORE_TIMEOUT)) + return false; + + return true; +} + +static void ar9003_hw_rtt_load_hist_entry(struct ath_hw *ah, u8 chain, + u32 index, u32 data28) +{ + u32 val; + + val = SM(data28, AR_PHY_RTT_SW_RTT_TABLE_DATA); + REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_1_B(chain), val); + + val = SM(0, AR_PHY_RTT_SW_RTT_TABLE_ACCESS) | + SM(1, AR_PHY_RTT_SW_RTT_TABLE_WRITE) | + SM(index, AR_PHY_RTT_SW_RTT_TABLE_ADDR); + REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain), val); + udelay(1); + + val |= SM(1, AR_PHY_RTT_SW_RTT_TABLE_ACCESS); + REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain), val); + udelay(1); + + if (!ath9k_hw_wait(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain), + AR_PHY_RTT_SW_RTT_TABLE_ACCESS, 0, + RTT_ACCESS_TIMEOUT)) + return; + + val &= ~SM(1, AR_PHY_RTT_SW_RTT_TABLE_WRITE); + REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain), val); + udelay(1); + + ath9k_hw_wait(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain), + AR_PHY_RTT_SW_RTT_TABLE_ACCESS, 0, + RTT_ACCESS_TIMEOUT); +} + +void ar9003_hw_rtt_load_hist(struct ath_hw *ah, u8 chain, u32 *table) +{ + int i; + + for (i = 0; i < MAX_RTT_TABLE_ENTRY; i++) + ar9003_hw_rtt_load_hist_entry(ah, chain, i, table[i]); +} + +static int ar9003_hw_rtt_fill_hist_entry(struct ath_hw *ah, u8 chain, u32 index) +{ + u32 val; + + val = SM(0, AR_PHY_RTT_SW_RTT_TABLE_ACCESS) | + SM(0, AR_PHY_RTT_SW_RTT_TABLE_WRITE) | + SM(index, AR_PHY_RTT_SW_RTT_TABLE_ADDR); + + REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain), val); + udelay(1); + + val |= SM(1, AR_PHY_RTT_SW_RTT_TABLE_ACCESS); + REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain), val); + udelay(1); + + if (!ath9k_hw_wait(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain), + AR_PHY_RTT_SW_RTT_TABLE_ACCESS, 0, + RTT_ACCESS_TIMEOUT)) + return RTT_BAD_VALUE; + + val = REG_READ(ah, AR_PHY_RTT_TABLE_SW_INTF_1_B(chain)); + + return val; +} + +void ar9003_hw_rtt_fill_hist(struct ath_hw *ah, u8 chain, u32 *table) +{ + int i; + + for (i = 0; i < MAX_RTT_TABLE_ENTRY; i++) + table[i] = ar9003_hw_rtt_fill_hist_entry(ah, chain, i); +} + +void ar9003_hw_rtt_clear_hist(struct ath_hw *ah) +{ + int i, j; + + for (i = 0; i < AR9300_MAX_CHAINS; i++) { + if (!(ah->rxchainmask & (1 << i))) + continue; + for (j = 0; j < MAX_RTT_TABLE_ENTRY; j++) + ar9003_hw_rtt_load_hist_entry(ah, i, j, 0); + } +} diff --git a/drivers/net/wireless/ath/ath9k/ar9003_rtt.h b/drivers/net/wireless/ath/ath9k/ar9003_rtt.h new file mode 100644 index 00000000000..030758d087d --- /dev/null +++ b/drivers/net/wireless/ath/ath9k/ar9003_rtt.h @@ -0,0 +1,28 @@ +/* + * Copyright (c) 2010-2011 Atheros Communications Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef AR9003_RTT_H +#define AR9003_RTT_H + +void ar9003_hw_rtt_enable(struct ath_hw *ah); +void ar9003_hw_rtt_disable(struct ath_hw *ah); +void ar9003_hw_rtt_set_mask(struct ath_hw *ah, u32 rtt_mask); +bool ar9003_hw_rtt_force_restore(struct ath_hw *ah); +void ar9003_hw_rtt_load_hist(struct ath_hw *ah, u8 chain, u32 *table); +void ar9003_hw_rtt_fill_hist(struct ath_hw *ah, u8 chain, u32 *table); +void ar9003_hw_rtt_clear_hist(struct ath_hw *ah); + +#endif diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index e6b0d6883ac..0eb0b3bcb74 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1709,6 +1709,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, if (caldata) { caldata->done_txiqcal_once = false; caldata->done_txclcal_once = false; + caldata->rtt_hist.num_readings = 0; } if (!ath9k_hw_init_cal(ah, chan)) return -EIO; @@ -2319,6 +2320,9 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) if (!AR_SREV_9330(ah)) ah->enabled_cals |= TX_IQ_ON_AGC_CAL; } + if (AR_SREV_9480(ah)) + pCap->hw_caps |= ATH9K_HW_CAP_RTT; + return 0; } diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 75982a7ebcc..0f6fc25bfb1 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -202,6 +202,7 @@ enum ath9k_hw_caps { ATH9K_HW_CAP_2GHZ = BIT(13), ATH9K_HW_CAP_5GHZ = BIT(14), ATH9K_HW_CAP_APM = BIT(15), + ATH9K_HW_CAP_RTT = BIT(16), }; struct ath9k_hw_capabilities { @@ -337,6 +338,13 @@ enum ath9k_int { CHANNEL_HT40PLUS | \ CHANNEL_HT40MINUS) +#define MAX_RTT_TABLE_ENTRY 6 +#define RTT_HIST_MAX 3 +struct ath9k_rtt_hist { + u32 table[AR9300_MAX_CHAINS][RTT_HIST_MAX][MAX_RTT_TABLE_ENTRY]; + u8 num_readings; +}; + #define MAX_IQCAL_MEASUREMENT 8 #define MAX_CL_TAB_ENTRY 16 @@ -357,6 +365,7 @@ struct ath9k_hw_cal_data { int tx_corr_coeff[MAX_IQCAL_MEASUREMENT][AR9300_MAX_CHAINS]; u32 tx_clcal[AR9300_MAX_CHAINS][MAX_CL_TAB_ENTRY]; struct ath9k_nfcal_hist nfCalHist[NUM_NF_READINGS]; + struct ath9k_rtt_hist rtt_hist; }; struct ath9k_channel { diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index b76c49d9c50..87a1245a68e 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -1933,6 +1933,7 @@ enum { #define AR_PHY_AGC_CONTROL_NO_UPDATE_NF 0x00020000 /* don't update noise floor automatically */ #define AR_PHY_AGC_CONTROL_EXT_NF_PWR_MEAS 0x00040000 /* extend noise floor power measurement */ #define AR_PHY_AGC_CONTROL_CLC_SUCCESS 0x00080000 /* carrier leak calibration done */ +#define AR_PHY_AGC_CONTROL_PKDET_CAL 0x00100000 #define AR_PHY_AGC_CONTROL_YCOK_MAX 0x000003c0 #define AR_PHY_AGC_CONTROL_YCOK_MAX_S 6 |