wireless: add new wil6210 802.11ad 60GHz driver

This adds support for the 60 GHz 802.11ad Wilocity card
through a new driver, wil6210. Wilocity implemented the
firmware, QCA maintains the device driver.

Currently supported:

- STA: with security
- AP: limited to 1 connected STA, security disabled
- Monitor: due to a hardware/firmware limitation
  either control or non-control frames are monitored

Using a STA and AP with this drive, one can assemble
a fully functional BSS. Throughput of 1.2Gbps is achieved
with iperf.

The wil6210 cards have on-board flash memory for the
firmware, the cards comes pre-flashed and no firmware
download is required.

For more details see:

http://wireless.kernel.org/en/users/Drivers/wil6210

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 13 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/wil6210/Makefile b/drivers/net/wireless/ath/wil6210/Makefile
new file mode 100644
index 00000000000..9396dc9fe3c
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/Makefile
@@ -0,0 +1,13 @@
+obj-$(CONFIG_WIL6210) += wil6210.o
+
+wil6210-objs := main.o
+wil6210-objs += netdev.o
+wil6210-objs += cfg80211.o
+wil6210-objs += pcie_bus.o
+wil6210-objs += debugfs.o
+wil6210-objs += wmi.o
+wil6210-objs += interrupt.o
+wil6210-objs += txrx.o
+
+subdir-ccflags-y += -Werror
+subdir-ccflags-y += -D__CHECK_ENDIAN__