diff options
| author | Kirshenbaum Erez <erezk@wilocity.com> | 2013-06-09 17:35:28 +0300 |
|---|---|---|
| committer | John W. Linville <linville@tuxdriver.com> | 2013-06-12 15:06:52 -0400 |
| commit | 4c895f41a750b3f81bf0890d2730ac6b867357f8 (patch) | |
| tree | 677344aefbd42f14bc24bc32eb472739a0b572be /drivers/net/wireless/ath/wil6210 | |
| parent | eb4928cfc6263c3377d049a41830e36d1af15b31 (diff) | |
wil6210: Fix AP/PCP start flow
WMI PCP Start flow should not be handled through:
net_device_ops->ndo_open()->wil_up()->__wil_up()
because it missing mandatory FW parameters (SSID,Channel,IEs, Security...).
Prior to AP starting __wil_up() may be called with iftype set
cfg80211_ops->change_virtual_intf(NL80211_IFTYPE_AP or STATION)
depend on the application hostapd/wpa_supplicant/iw.
there should not be an attempt to start an AP flow,
AP/PCP start flow will be started latter by cfg80211_ops->start_ap().
Signed-off-by: Kirshenbaum Erez <erezk@wilocity.com>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/ath/wil6210')
| -rw-r--r-- | drivers/net/wireless/ath/wil6210/main.c | 34 |
1 files changed, 0 insertions, 34 deletions
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index 8cafa456398..0a2844c48a6 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -286,10 +286,7 @@ static int __wil_up(struct wil6210_priv *wil) { struct net_device *ndev = wil_to_ndev(wil); struct wireless_dev *wdev = wil->wdev; - struct ieee80211_channel *channel = wdev->preset_chandef.chan; int rc; - int bi; - u16 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype); rc = wil_reset(wil); if (rc) @@ -300,32 +297,25 @@ static int __wil_up(struct wil6210_priv *wil) if (rc) return rc; - /* FIXME Firmware works now in PBSS mode(ToDS=0, FromDS=0) */ - wmi_nettype = wil_iftype_nl2wmi(NL80211_IFTYPE_ADHOC); switch (wdev->iftype) { case NL80211_IFTYPE_STATION: wil_dbg_misc(wil, "type: STATION\n"); - bi = 0; ndev->type = ARPHRD_ETHER; break; case NL80211_IFTYPE_AP: wil_dbg_misc(wil, "type: AP\n"); - bi = 100; ndev->type = ARPHRD_ETHER; break; case NL80211_IFTYPE_P2P_CLIENT: wil_dbg_misc(wil, "type: P2P_CLIENT\n"); - bi = 0; ndev->type = ARPHRD_ETHER; break; case NL80211_IFTYPE_P2P_GO: wil_dbg_misc(wil, "type: P2P_GO\n"); - bi = 100; ndev->type = ARPHRD_ETHER; break; case NL80211_IFTYPE_MONITOR: wil_dbg_misc(wil, "type: Monitor\n"); - bi = 0; ndev->type = ARPHRD_IEEE80211_RADIOTAP; /* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_RADIOTAP ? */ break; @@ -333,33 +323,9 @@ static int __wil_up(struct wil6210_priv *wil) return -EOPNOTSUPP; } - /* Apply profile in the following order: */ - /* SSID and channel for the AP */ - switch (wdev->iftype) { - case NL80211_IFTYPE_AP: - case NL80211_IFTYPE_P2P_GO: - if (wdev->ssid_len == 0) { - wil_err(wil, "SSID not set\n"); - return -EINVAL; - } - rc = wmi_set_ssid(wil, wdev->ssid_len, wdev->ssid); - if (rc) - return rc; - break; - default: - break; - } - /* MAC address - pre-requisite for other commands */ wmi_set_mac_address(wil, ndev->dev_addr); - /* Set up beaconing if required. */ - if (bi > 0) { - rc = wmi_pcp_start(wil, bi, wmi_nettype, - (channel ? channel->hw_value : 0)); - if (rc) - return rc; - } napi_enable(&wil->napi_rx); napi_enable(&wil->napi_tx); |