atheros: put atheros wireless drivers into ath/

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 0 insertions, 1346 deletions

diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c
deleted file mode 100644
index 775fdf78554..00000000000
--- a/drivers/net/wireless/ath5k/reset.c
+++ /dev/null
@@ -1,1346 +0,0 @@
-/*
- * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
- * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
- * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
- * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org>
- * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#define _ATH5K_RESET
-
-/*****************************\
-  Reset functions and helpers
-\*****************************/
-
-#include <linux/pci.h> 		/* To determine if a card is pci-e */
-#include <linux/bitops.h>	/* For get_bitmask_order */
-#include "ath5k.h"
-#include "reg.h"
-#include "base.h"
-#include "debug.h"
-
-/**
- * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212
- *
- * @ah: the &struct ath5k_hw
- * @channel: the currently set channel upon reset
- *
- * Write the delta slope coefficient (used on pilot tracking ?) for OFDM
- * operation on the AR5212 upon reset. This is a helper for ath5k_hw_reset().
- *
- * Since delta slope is floating point we split it on its exponent and
- * mantissa and provide these values on hw.
- *
- * For more infos i think this patent is related
- * http://www.freepatentsonline.com/7184495.html
- */
-static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
-	struct ieee80211_channel *channel)
-{
-	/* Get exponent and mantissa and set it */
-	u32 coef_scaled, coef_exp, coef_man,
-		ds_coef_exp, ds_coef_man, clock;
-
-	BUG_ON(!(ah->ah_version == AR5K_AR5212) ||
-		!(channel->hw_value & CHANNEL_OFDM));
-
-	/* Get coefficient
-	 * ALGO: coef = (5 * clock * carrier_freq) / 2)
-	 * we scale coef by shifting clock value by 24 for
-	 * better precision since we use integers */
-	/* TODO: Half/quarter rate */
-	clock =  ath5k_hw_htoclock(1, channel->hw_value & CHANNEL_TURBO);
-
-	coef_scaled = ((5 * (clock << 24)) / 2) / channel->center_freq;
-
-	/* Get exponent
-	 * ALGO: coef_exp = 14 - highest set bit position */
-	coef_exp = get_bitmask_order(coef_scaled);
-
-	/* Doesn't make sense if it's zero*/
-	if (!coef_exp)
-		return -EINVAL;
-
-	/* Note: we've shifted coef_scaled by 24 */
-	coef_exp = 14 - (coef_exp - 24);
-
-
-	/* Get mantissa (significant digits)
-	 * ALGO: coef_mant = floor(coef_scaled* 2^coef_exp+0.5) */
-	coef_man = coef_scaled +
-		(1 << (24 - coef_exp - 1));
-
-	/* Calculate delta slope coefficient exponent
-	 * and mantissa (remove scaling) and set them on hw */
-	ds_coef_man = coef_man >> (24 - coef_exp);
-	ds_coef_exp = coef_exp - 16;
-
-	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
-		AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man);
-	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
-		AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp);
-
-	return 0;
-}
-
-
-/*
- * index into rates for control rates, we can set it up like this because
- * this is only used for AR5212 and we know it supports G mode
- */
-static const unsigned int control_rates[] =
-	{ 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 };
-
-/**
- * ath5k_hw_write_rate_duration - fill rate code to duration table
- *
- * @ah: the &struct ath5k_hw
- * @mode: one of enum ath5k_driver_mode
- *
- * Write the rate code to duration table upon hw reset. This is a helper for
- * ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout on
- * the hardware, based on current mode, for each rate. The rates which are
- * capable of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have
- * different rate code so we write their value twice (one for long preample
- * and one for short).
- *
- * Note: Band doesn't matter here, if we set the values for OFDM it works
- * on both a and g modes. So all we have to do is set values for all g rates
- * that include all OFDM and CCK rates. If we operate in turbo or xr/half/
- * quarter rate mode, we need to use another set of bitrates (that's why we
- * need the mode parameter) but we don't handle these proprietary modes yet.
- */
-static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah,
-       unsigned int mode)
-{
-	struct ath5k_softc *sc = ah->ah_sc;
-	struct ieee80211_rate *rate;
-	unsigned int i;
-
-	/* Write rate duration table */
-	for (i = 0; i < sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates; i++) {
-		u32 reg;
-		u16 tx_time;
-
-		rate = &sc->sbands[IEEE80211_BAND_2GHZ].bitrates[control_rates[i]];
-
-		/* Set ACK timeout */
-		reg = AR5K_RATE_DUR(rate->hw_value);
-
-		/* An ACK frame consists of 10 bytes. If you add the FCS,
-		 * which ieee80211_generic_frame_duration() adds,
-		 * its 14 bytes. Note we use the control rate and not the
-		 * actual rate for this rate. See mac80211 tx.c
-		 * ieee80211_duration() for a brief description of
-		 * what rate we should choose to TX ACKs. */
-		tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw,
-							sc->vif, 10, rate));
-
-		ath5k_hw_reg_write(ah, tx_time, reg);
-
-		if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE))
-			continue;
-
-		/*
-		 * We're not distinguishing short preamble here,
-		 * This is true, all we'll get is a longer value here
-		 * which is not necessarilly bad. We could use
-		 * export ieee80211_frame_duration() but that needs to be
-		 * fixed first to be properly used by mac802111 drivers:
-		 *
-		 *  - remove erp stuff and let the routine figure ofdm
-		 *    erp rates
-		 *  - remove passing argument ieee80211_local as
-		 *    drivers don't have access to it
-		 *  - move drivers using ieee80211_generic_frame_duration()
-		 *    to this
-		 */
-		ath5k_hw_reg_write(ah, tx_time,
-			reg + (AR5K_SET_SHORT_PREAMBLE << 2));
-	}
-}
-
-/*
- * Reset chipset
- */
-static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val)
-{
-	int ret;
-	u32 mask = val ? val : ~0U;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	/* Read-and-clear RX Descriptor Pointer*/
-	ath5k_hw_reg_read(ah, AR5K_RXDP);
-
-	/*
-	 * Reset the device and wait until success
-	 */
-	ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL);
-
-	/* Wait at least 128 PCI clocks */
-	udelay(15);
-
-	if (ah->ah_version == AR5K_AR5210) {
-		val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA
-			| AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY;
-		mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA
-			| AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY;
-	} else {
-		val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
-		mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
-	}
-
-	ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false);
-
-	/*
-	 * Reset configuration register (for hw byte-swap). Note that this
-	 * is only set for big endian. We do the necessary magic in
-	 * AR5K_INIT_CFG.
-	 */
-	if ((val & AR5K_RESET_CTL_PCU) == 0)
-		ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG);
-
-	return ret;
-}
-
-/*
- * Sleep control
- */
-int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
-		bool set_chip, u16 sleep_duration)
-{
-	unsigned int i;
-	u32 staid, data;
-
-	ATH5K_TRACE(ah->ah_sc);
-	staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1);
-
-	switch (mode) {
-	case AR5K_PM_AUTO:
-		staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA;
-		/* fallthrough */
-	case AR5K_PM_NETWORK_SLEEP:
-		if (set_chip)
-			ath5k_hw_reg_write(ah,
-				AR5K_SLEEP_CTL_SLE_ALLOW |
-				sleep_duration,
-				AR5K_SLEEP_CTL);
-
-		staid |= AR5K_STA_ID1_PWR_SV;
-		break;
-
-	case AR5K_PM_FULL_SLEEP:
-		if (set_chip)
-			ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP,
-				AR5K_SLEEP_CTL);
-
-		staid |= AR5K_STA_ID1_PWR_SV;
-		break;
-
-	case AR5K_PM_AWAKE:
-
-		staid &= ~AR5K_STA_ID1_PWR_SV;
-
-		if (!set_chip)
-			goto commit;
-
-		/* Preserve sleep duration */
-		data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL);
-		if (data & 0xffc00000)
-			data = 0;
-		else
-			data = data & 0xfffcffff;
-
-		ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
-		udelay(15);
-
-		for (i = 50; i > 0; i--) {
-			/* Check if the chip did wake up */
-			if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) &
-					AR5K_PCICFG_SPWR_DN) == 0)
-				break;
-
-			/* Wait a bit and retry */
-			udelay(200);
-			ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
-		}
-
-		/* Fail if the chip didn't wake up */
-		if (i <= 0)
-			return -EIO;
-
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-commit:
-	ah->ah_power_mode = mode;
-	ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1);
-
-	return 0;
-}
-
-/*
- * Bring up MAC + PHY Chips and program PLL
- * TODO: Half/Quarter rate support
- */
-int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
-{
-	struct pci_dev *pdev = ah->ah_sc->pdev;
-	u32 turbo, mode, clock, bus_flags;
-	int ret;
-
-	turbo = 0;
-	mode = 0;
-	clock = 0;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	/* Wakeup the device */
-	ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
-	if (ret) {
-		ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n");
-		return ret;
-	}
-
-	if (ah->ah_version != AR5K_AR5210) {
-		/*
-		 * Get channel mode flags
-		 */
-
-		if (ah->ah_radio >= AR5K_RF5112) {
-			mode = AR5K_PHY_MODE_RAD_RF5112;
-			clock = AR5K_PHY_PLL_RF5112;
-		} else {
-			mode = AR5K_PHY_MODE_RAD_RF5111;	/*Zero*/
-			clock = AR5K_PHY_PLL_RF5111;		/*Zero*/
-		}
-
-		if (flags & CHANNEL_2GHZ) {
-			mode |= AR5K_PHY_MODE_FREQ_2GHZ;
-			clock |= AR5K_PHY_PLL_44MHZ;
-
-			if (flags & CHANNEL_CCK) {
-				mode |= AR5K_PHY_MODE_MOD_CCK;
-			} else if (flags & CHANNEL_OFDM) {
-				/* XXX Dynamic OFDM/CCK is not supported by the
-				 * AR5211 so we set MOD_OFDM for plain g (no
-				 * CCK headers) operation. We need to test
-				 * this, 5211 might support ofdm-only g after
-				 * all, there are also initial register values
-				 * in the code for g mode (see initvals.c). */
-				if (ah->ah_version == AR5K_AR5211)
-					mode |= AR5K_PHY_MODE_MOD_OFDM;
-				else
-					mode |= AR5K_PHY_MODE_MOD_DYN;
-			} else {
-				ATH5K_ERR(ah->ah_sc,
-					"invalid radio modulation mode\n");
-				return -EINVAL;
-			}
-		} else if (flags & CHANNEL_5GHZ) {
-			mode |= AR5K_PHY_MODE_FREQ_5GHZ;
-
-			if (ah->ah_radio == AR5K_RF5413)
-				clock = AR5K_PHY_PLL_40MHZ_5413;
-			else
-				clock |= AR5K_PHY_PLL_40MHZ;
-
-			if (flags & CHANNEL_OFDM)
-				mode |= AR5K_PHY_MODE_MOD_OFDM;
-			else {
-				ATH5K_ERR(ah->ah_sc,
-					"invalid radio modulation mode\n");
-				return -EINVAL;
-			}
-		} else {
-			ATH5K_ERR(ah->ah_sc, "invalid radio frequency mode\n");
-			return -EINVAL;
-		}
-
-		if (flags & CHANNEL_TURBO)
-			turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT;
-	} else { /* Reset the device */
-
-		/* ...enable Atheros turbo mode if requested */
-		if (flags & CHANNEL_TURBO)
-			ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE,
-					AR5K_PHY_TURBO);
-	}
-
-	/* reseting PCI on PCI-E cards results card to hang
-	 * and always return 0xffff... so we ingore that flag
-	 * for PCI-E cards */
-	bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;
-
-	/* Reset chipset */
-	if (ah->ah_version == AR5K_AR5210) {
-		ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
-			AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
-			AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
-			mdelay(2);
-	} else {
-		ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
-			AR5K_RESET_CTL_BASEBAND | bus_flags);
-	}
-	if (ret) {
-		ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n");
-		return -EIO;
-	}
-
-	/* ...wakeup again!*/
-	ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
-	if (ret) {
-		ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n");
-		return ret;
-	}
-
-	/* ...final warm reset */
-	if (ath5k_hw_nic_reset(ah, 0)) {
-		ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n");
-		return -EIO;
-	}
-
-	if (ah->ah_version != AR5K_AR5210) {
-
-		/* ...update PLL if needed */
-		if (ath5k_hw_reg_read(ah, AR5K_PHY_PLL) != clock) {
-			ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL);
-			udelay(300);
-		}
-
-		/* ...set the PHY operating mode */
-		ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE);
-		ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO);
-	}
-
-	return 0;
-}
-
-/*
- * If there is an external 32KHz crystal available, use it
- * as ref. clock instead of 32/40MHz clock and baseband clocks
- * to save power during sleep or restore normal 32/40MHz
- * operation.
- *
- * XXX: When operating on 32KHz certain PHY registers (27 - 31,
- * 	123 - 127) require delay on access.
- */
-static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable)
-{
-	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-	u32 scal, spending, usec32;
-
-	/* Only set 32KHz settings if we have an external
-	 * 32KHz crystal present */
-	if ((AR5K_EEPROM_HAS32KHZCRYSTAL(ee->ee_misc1) ||
-	AR5K_EEPROM_HAS32KHZCRYSTAL_OLD(ee->ee_misc1)) &&
-	enable) {
-
-		/* 1 usec/cycle */
-		AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, 1);
-		/* Set up tsf increment on each cycle */
-		AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 61);
-
-		/* Set baseband sleep control registers
-		 * and sleep control rate */
-		ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR);
-
-		if ((ah->ah_radio == AR5K_RF5112) ||
-		(ah->ah_radio == AR5K_RF5413) ||
-		(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
-			spending = 0x14;
-		else
-			spending = 0x18;
-		ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING);
-
-		if ((ah->ah_radio == AR5K_RF5112) ||
-		(ah->ah_radio == AR5K_RF5413) ||
-		(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) {
-			ath5k_hw_reg_write(ah, 0x26, AR5K_PHY_SLMT);
-			ath5k_hw_reg_write(ah, 0x0d, AR5K_PHY_SCAL);
-			ath5k_hw_reg_write(ah, 0x07, AR5K_PHY_SCLOCK);
-			ath5k_hw_reg_write(ah, 0x3f, AR5K_PHY_SDELAY);
-			AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
-				AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x02);
-		} else {
-			ath5k_hw_reg_write(ah, 0x0a, AR5K_PHY_SLMT);
-			ath5k_hw_reg_write(ah, 0x0c, AR5K_PHY_SCAL);
-			ath5k_hw_reg_write(ah, 0x03, AR5K_PHY_SCLOCK);
-			ath5k_hw_reg_write(ah, 0x20, AR5K_PHY_SDELAY);
-			AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
-				AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x03);
-		}
-
-		/* Enable sleep clock operation */
-		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG,
-				AR5K_PCICFG_SLEEP_CLOCK_EN);
-
-	} else {
-
-		/* Disable sleep clock operation and
-		 * restore default parameters */
-		AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG,
-				AR5K_PCICFG_SLEEP_CLOCK_EN);
-
-		AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
-				AR5K_PCICFG_SLEEP_CLOCK_RATE, 0);
-
-		ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR);
-		ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT);
-
-		if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))
-			scal = AR5K_PHY_SCAL_32MHZ_2417;
-		else if (ath5k_eeprom_is_hb63(ah))
-			scal = AR5K_PHY_SCAL_32MHZ_HB63;
-		else
-			scal = AR5K_PHY_SCAL_32MHZ;
-		ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL);
-
-		ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK);
-		ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY);
-
-		if ((ah->ah_radio == AR5K_RF5112) ||
-		(ah->ah_radio == AR5K_RF5413) ||
-		(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
-			spending = 0x14;
-		else
-			spending = 0x18;
-		ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING);
-
-		if ((ah->ah_radio == AR5K_RF5112) ||
-		(ah->ah_radio == AR5K_RF5413))
-			usec32 = 39;
-		else
-			usec32 = 31;
-		AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, usec32);
-
-		AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 1);
-	}
-	return;
-}
-
-static bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
-				struct ieee80211_channel *channel)
-{
-	u8 refclk_freq;
-
-	if ((ah->ah_radio == AR5K_RF5112) ||
-	(ah->ah_radio == AR5K_RF5413) ||
-	(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
-		refclk_freq = 40;
-	else
-		refclk_freq = 32;
-
-	if ((channel->center_freq % refclk_freq != 0) &&
-	((channel->center_freq % refclk_freq < 10) ||
-	(channel->center_freq % refclk_freq > 22)))
-		return true;
-	else
-		return false;
-}
-
-/* TODO: Half/Quarter rate */
-static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
-				struct ieee80211_channel *channel)
-{
-	if (ah->ah_version == AR5K_AR5212 &&
-	    ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) {
-
-		/* Setup ADC control */
-		ath5k_hw_reg_write(ah,
-				(AR5K_REG_SM(2,
-				AR5K_PHY_ADC_CTL_INBUFGAIN_OFF) |
-				AR5K_REG_SM(2,
-				AR5K_PHY_ADC_CTL_INBUFGAIN_ON) |
-				AR5K_PHY_ADC_CTL_PWD_DAC_OFF |
-				AR5K_PHY_ADC_CTL_PWD_ADC_OFF),
-				AR5K_PHY_ADC_CTL);
-
-
-
-		/* Disable barker RSSI threshold */
-		AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_DAG_CCK_CTL,
-				AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR);
-
-		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DAG_CCK_CTL,
-			AR5K_PHY_DAG_CCK_CTL_RSSI_THR, 2);
-
-		/* Set the mute mask */
-		ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK);
-	}
-
-	/* Clear PHY_BLUETOOTH to allow RX_CLEAR line debug */
-	if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212B)
-		ath5k_hw_reg_write(ah, 0, AR5K_PHY_BLUETOOTH);
-
-	/* Enable DCU double buffering */
-	if (ah->ah_phy_revision > AR5K_SREV_PHY_5212B)
-		AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
-				AR5K_TXCFG_DCU_DBL_BUF_DIS);
-
-	/* Set DAC/ADC delays */
-	if (ah->ah_version == AR5K_AR5212) {
-		u32 scal;
-		if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))
-			scal = AR5K_PHY_SCAL_32MHZ_2417;
-		else if (ath5k_eeprom_is_hb63(ah))
-			scal = AR5K_PHY_SCAL_32MHZ_HB63;
-		else
-			scal = AR5K_PHY_SCAL_32MHZ;
-		ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL);
-	}
-
-	/* Set fast ADC */
-	if ((ah->ah_radio == AR5K_RF5413) ||
-	(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) {
-		u32 fast_adc = true;
-
-		if (channel->center_freq == 2462 ||
-		channel->center_freq == 2467)
-			fast_adc = 0;
-
-		/* Only update if needed */
-		if (ath5k_hw_reg_read(ah, AR5K_PHY_FAST_ADC) != fast_adc)
-				ath5k_hw_reg_write(ah, fast_adc,
-						AR5K_PHY_FAST_ADC);
-	}
-
-	/* Fix for first revision of the RF5112 RF chipset */
-	if (ah->ah_radio == AR5K_RF5112 &&
-			ah->ah_radio_5ghz_revision <
-			AR5K_SREV_RAD_5112A) {
-		u32 data;
-		ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD,
-				AR5K_PHY_CCKTXCTL);
-		if (channel->hw_value & CHANNEL_5GHZ)
-			data = 0xffb81020;
-		else
-			data = 0xffb80d20;
-		ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL);
-	}
-
-	if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
-		u32 usec_reg;
-		/* 5311 has different tx/rx latency masks
-		 * from 5211, since we deal 5311 the same
-		 * as 5211 when setting initvals, shift
-		 * values here to their proper locations */
-		usec_reg = ath5k_hw_reg_read(ah, AR5K_USEC_5211);
-		ath5k_hw_reg_write(ah, usec_reg & (AR5K_USEC_1 |
-				AR5K_USEC_32 |
-				AR5K_USEC_TX_LATENCY_5211 |
-				AR5K_REG_SM(29,
-				AR5K_USEC_RX_LATENCY_5210)),
-				AR5K_USEC_5211);
-		/* Clear QCU/DCU clock gating register */
-		ath5k_hw_reg_write(ah, 0, AR5K_QCUDCU_CLKGT);
-		/* Set DAC/ADC delays */
-		ath5k_hw_reg_write(ah, 0x08, AR5K_PHY_SCAL);
-		/* Enable PCU FIFO corruption ECO */
-		AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211,
-					AR5K_DIAG_SW_ECO_ENABLE);
-	}
-}
-
-static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
-		struct ieee80211_channel *channel, u8 *ant, u8 ee_mode)
-{
-	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-	s16 cck_ofdm_pwr_delta;
-
-	/* Adjust power delta for channel 14 */
-	if (channel->center_freq == 2484)
-		cck_ofdm_pwr_delta =
-			((ee->ee_cck_ofdm_power_delta -
-			ee->ee_scaled_cck_delta) * 2) / 10;
-	else
-		cck_ofdm_pwr_delta =
-			(ee->ee_cck_ofdm_power_delta * 2) / 10;
-
-	/* Set CCK to OFDM power delta on tx power
-	 * adjustment register */
-	if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) {
-		if (channel->hw_value == CHANNEL_G)
-			ath5k_hw_reg_write(ah,
-			AR5K_REG_SM((ee->ee_cck_ofdm_gain_delta * -1),
-				AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA) |
-			AR5K_REG_SM((cck_ofdm_pwr_delta * -1),
-				AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX),
-				AR5K_PHY_TX_PWR_ADJ);
-		else
-			ath5k_hw_reg_write(ah, 0, AR5K_PHY_TX_PWR_ADJ);
-	} else {
-		/* For older revs we scale power on sw during tx power
-		 * setup */
-		ah->ah_txpower.txp_cck_ofdm_pwr_delta = cck_ofdm_pwr_delta;
-		ah->ah_txpower.txp_cck_ofdm_gainf_delta =
-						ee->ee_cck_ofdm_gain_delta;
-	}
-
-	/* Set antenna idle switch table */
-	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_ANT_CTL,
-			AR5K_PHY_ANT_CTL_SWTABLE_IDLE,
-			(ah->ah_antenna[ee_mode][0] |
-			AR5K_PHY_ANT_CTL_TXRX_EN));
-
-	/* Set antenna switch table */
-	ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]],
-		AR5K_PHY_ANT_SWITCH_TABLE_0);
-	ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]],
-		AR5K_PHY_ANT_SWITCH_TABLE_1);
-
-	/* Noise floor threshold */
-	ath5k_hw_reg_write(ah,
-		AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]),
-		AR5K_PHY_NFTHRES);
-
-	if ((channel->hw_value & CHANNEL_TURBO) &&
-	(ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_0)) {
-		/* Switch settling time (Turbo) */
-		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
-				AR5K_PHY_SETTLING_SWITCH,
-				ee->ee_switch_settling_turbo[ee_mode]);
-
-		/* Tx/Rx attenuation (Turbo) */
-		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN,
-				AR5K_PHY_GAIN_TXRX_ATTEN,
-				ee->ee_atn_tx_rx_turbo[ee_mode]);
-
-		/* ADC/PGA desired size (Turbo) */
-		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
-				AR5K_PHY_DESIRED_SIZE_ADC,
-				ee->ee_adc_desired_size_turbo[ee_mode]);
-
-		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
-				AR5K_PHY_DESIRED_SIZE_PGA,
-				ee->ee_pga_desired_size_turbo[ee_mode]);
-
-		/* Tx/Rx margin (Turbo) */
-		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
-				AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
-				ee->ee_margin_tx_rx_turbo[ee_mode]);
-
-	} else {
-		/* Switch settling time */
-		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
-				AR5K_PHY_SETTLING_SWITCH,
-				ee->ee_switch_settling[ee_mode]);
-
-		/* Tx/Rx attenuation */
-		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN,
-				AR5K_PHY_GAIN_TXRX_ATTEN,
-				ee->ee_atn_tx_rx[ee_mode]);
-
-		/* ADC/PGA desired size */
-		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
-				AR5K_PHY_DESIRED_SIZE_ADC,
-				ee->ee_adc_desired_size[ee_mode]);
-
-		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_DESIRED_SIZE,
-				AR5K_PHY_DESIRED_SIZE_PGA,
-				ee->ee_pga_desired_size[ee_mode]);
-
-		/* Tx/Rx margin */
-		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
-			AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
-				AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
-				ee->ee_margin_tx_rx[ee_mode]);
-	}
-
-	/* XPA delays */
-	ath5k_hw_reg_write(ah,
-		(ee->ee_tx_end2xpa_disable[ee_mode] << 24) |
-		(ee->ee_tx_end2xpa_disable[ee_mode] << 16) |
-		(ee->ee_tx_frm2xpa_enable[ee_mode] << 8) |
-		(ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4);
-
-	/* XLNA delay */
-	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL3,
-			AR5K_PHY_RF_CTL3_TXE2XLNA_ON,
-			ee->ee_tx_end2xlna_enable[ee_mode]);
-
-	/* Thresh64 (ANI) */
-	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_NF,
-			AR5K_PHY_NF_THRESH62,
-			ee->ee_thr_62[ee_mode]);
-
-
-	/* False detect backoff for channels
-	 * that have spur noise. Write the new
-	 * cyclic power RSSI threshold. */
-	if (ath5k_hw_chan_has_spur_noise(ah, channel))
-		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR,
-				AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1,
-				AR5K_INIT_CYCRSSI_THR1 +
-				ee->ee_false_detect[ee_mode]);
-	else
-		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_OFDM_SELFCORR,
-				AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1,
-				AR5K_INIT_CYCRSSI_THR1);
-
-	/* I/Q correction
-	 * TODO: Per channel i/q infos ? */
-	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
-		AR5K_PHY_IQ_CORR_ENABLE |
-		(ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) |
-		ee->ee_q_cal[ee_mode]);
-
-	/* Heavy clipping -disable for now */
-	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_1)
-		ath5k_hw_reg_write(ah, 0, AR5K_PHY_HEAVY_CLIP_ENABLE);
-
-	return;
-}
-
-/*
- * Main reset function
- */
-int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
-	struct ieee80211_channel *channel, bool change_channel)
-{
-	u32 s_seq[10], s_ant, s_led[3], staid1_flags, tsf_up, tsf_lo;
-	u32 phy_tst1;
-	u8 mode, freq, ee_mode, ant[2];
-	int i, ret;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	s_ant = 0;
-	ee_mode = 0;
-	staid1_flags = 0;
-	tsf_up = 0;
-	tsf_lo = 0;
-	freq = 0;
-	mode = 0;
-
-	/*
-	 * Save some registers before a reset
-	 */
-	/*DCU/Antenna selection not available on 5210*/
-	if (ah->ah_version != AR5K_AR5210) {
-
-		switch (channel->hw_value & CHANNEL_MODES) {
-		case CHANNEL_A:
-			mode = AR5K_MODE_11A;
-			freq = AR5K_INI_RFGAIN_5GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11A;
-			break;
-		case CHANNEL_G:
-			mode = AR5K_MODE_11G;
-			freq = AR5K_INI_RFGAIN_2GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11G;
-			break;
-		case CHANNEL_B:
-			mode = AR5K_MODE_11B;
-			freq = AR5K_INI_RFGAIN_2GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11B;
-			break;
-		case CHANNEL_T:
-			mode = AR5K_MODE_11A_TURBO;
-			freq = AR5K_INI_RFGAIN_5GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11A;
-			break;
-		case CHANNEL_TG:
-			if (ah->ah_version == AR5K_AR5211) {
-				ATH5K_ERR(ah->ah_sc,
-					"TurboG mode not available on 5211");
-				return -EINVAL;
-			}
-			mode = AR5K_MODE_11G_TURBO;
-			freq = AR5K_INI_RFGAIN_2GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11G;
-			break;
-		case CHANNEL_XR:
-			if (ah->ah_version == AR5K_AR5211) {
-				ATH5K_ERR(ah->ah_sc,
-					"XR mode not available on 5211");
-				return -EINVAL;
-			}
-			mode = AR5K_MODE_XR;
-			freq = AR5K_INI_RFGAIN_5GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11A;
-			break;
-		default:
-			ATH5K_ERR(ah->ah_sc,
-				"invalid channel: %d\n", channel->center_freq);
-			return -EINVAL;
-		}
-
-		if (change_channel) {
-			/*
-			 * Save frame sequence count
-			 * For revs. after Oahu, only save
-			 * seq num for DCU 0 (Global seq num)
-			 */
-			if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
-
-				for (i = 0; i < 10; i++)
-					s_seq[i] = ath5k_hw_reg_read(ah,
-						AR5K_QUEUE_DCU_SEQNUM(i));
-
-			} else {
-				s_seq[0] = ath5k_hw_reg_read(ah,
-						AR5K_QUEUE_DCU_SEQNUM(0));
-			}
-
-			/* TSF accelerates on AR5211 durring reset
-			 * As a workaround save it here and restore
-			 * it later so that it's back in time after
-			 * reset. This way it'll get re-synced on the
-			 * next beacon without breaking ad-hoc.
-			 *
-			 * On AR5212 TSF is almost preserved across a
-			 * reset so it stays back in time anyway and
-			 * we don't have to save/restore it.
-			 *
-			 * XXX: Since this breaks power saving we have
-			 * to disable power saving until we receive the
-			 * next beacon, so we can resync beacon timers */
-			if (ah->ah_version == AR5K_AR5211) {
-				tsf_up = ath5k_hw_reg_read(ah, AR5K_TSF_U32);
-				tsf_lo = ath5k_hw_reg_read(ah, AR5K_TSF_L32);
-			}
-		}
-
-		/* Save default antenna */
-		s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA);
-
-		if (ah->ah_version == AR5K_AR5212) {
-			/* Restore normal 32/40MHz clock operation
-			 * to avoid register access delay on certain
-			 * PHY registers */
-			ath5k_hw_set_sleep_clock(ah, false);
-
-			/* Since we are going to write rf buffer
-			 * check if we have any pending gain_F
-			 * optimization settings */
-			if (change_channel && ah->ah_rf_banks != NULL)
-				ath5k_hw_gainf_calibrate(ah);
-		}
-	}
-
-	/*GPIOs*/
-	s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) &
-					AR5K_PCICFG_LEDSTATE;
-	s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR);
-	s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO);
-
-	/* AR5K_STA_ID1 flags, only preserve antenna
-	 * settings and ack/cts rate mode */
-	staid1_flags = ath5k_hw_reg_read(ah, AR5K_STA_ID1) &
-			(AR5K_STA_ID1_DEFAULT_ANTENNA |
-			AR5K_STA_ID1_DESC_ANTENNA |
-			AR5K_STA_ID1_RTS_DEF_ANTENNA |
-			AR5K_STA_ID1_ACKCTS_6MB |
-			AR5K_STA_ID1_BASE_RATE_11B |
-			AR5K_STA_ID1_SELFGEN_DEF_ANT);
-
-	/* Wakeup the device */
-	ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false);
-	if (ret)
-		return ret;
-
-	/*
-	 * Initialize operating mode
-	 */
-	ah->ah_op_mode = op_mode;
-
-	/* PHY access enable */
-	if (ah->ah_mac_srev >= AR5K_SREV_AR5211)
-		ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
-	else
-		ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ | 0x40,
-							AR5K_PHY(0));
-
-	/* Write initial settings */
-	ret = ath5k_hw_write_initvals(ah, mode, change_channel);
-	if (ret)
-		return ret;
-
-	/*
-	 * 5211/5212 Specific
-	 */
-	if (ah->ah_version != AR5K_AR5210) {
-
-		/*
-		 * Write initial RF gain settings
-		 * This should work for both 5111/5112
-		 */
-		ret = ath5k_hw_rfgain_init(ah, freq);
-		if (ret)
-			return ret;
-
-		mdelay(1);
-
-		/*
-		 * Tweak initval settings for revised
-		 * chipsets and add some more config
-		 * bits
-		 */
-		ath5k_hw_tweak_initval_settings(ah, channel);
-
-		/*
-		 * Set TX power (FIXME)
-		 */
-		ret = ath5k_hw_txpower(ah, channel, ee_mode,
-					AR5K_TUNE_DEFAULT_TXPOWER);
-		if (ret)
-			return ret;
-
-		/* Write rate duration table only on AR5212 and if
-		 * virtual interface has already been brought up
-		 * XXX: rethink this after new mode changes to
-		 * mac80211 are integrated */
-		if (ah->ah_version == AR5K_AR5212 &&
-			ah->ah_sc->vif != NULL)
-			ath5k_hw_write_rate_duration(ah, mode);
-
-		/*
-		 * Write RF buffer
-		 */
-		ret = ath5k_hw_rfregs_init(ah, channel, mode);
-		if (ret)
-			return ret;
-
-
-		/* Write OFDM timings on 5212*/
-		if (ah->ah_version == AR5K_AR5212 &&
-			channel->hw_value & CHANNEL_OFDM) {
-			ret = ath5k_hw_write_ofdm_timings(ah, channel);
-			if (ret)
-				return ret;
-		}
-
-		/*Enable/disable 802.11b mode on 5111
-		(enable 2111 frequency converter + CCK)*/
-		if (ah->ah_radio == AR5K_RF5111) {
-			if (mode == AR5K_MODE_11B)
-				AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG,
-				    AR5K_TXCFG_B_MODE);
-			else
-				AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
-				    AR5K_TXCFG_B_MODE);
-		}
-
-		/*
-		 * In case a fixed antenna was set as default
-		 * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE
-		 * registers.
-		 */
-		if (s_ant != 0) {
-			if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */
-				ant[0] = ant[1] = AR5K_ANT_FIXED_A;
-			else	/* 2 - Aux */
-				ant[0] = ant[1] = AR5K_ANT_FIXED_B;
-		} else {
-			ant[0] = AR5K_ANT_FIXED_A;
-			ant[1] = AR5K_ANT_FIXED_B;
-		}
-
-		/* Commit values from EEPROM */
-		ath5k_hw_commit_eeprom_settings(ah, channel, ant, ee_mode);
-
-	} else {
-		/*
-		 * For 5210 we do all initialization using
-		 * initvals, so we don't have to modify
-		 * any settings (5210 also only supports
-		 * a/aturbo modes)
-		 */
-		mdelay(1);
-		/* Disable phy and wait */
-		ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
-		mdelay(1);
-	}
-
-	/*
-	 * Restore saved values
-	 */
-
-	/*DCU/Antenna selection not available on 5210*/
-	if (ah->ah_version != AR5K_AR5210) {
-
-		if (change_channel) {
-			if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
-				for (i = 0; i < 10; i++)
-					ath5k_hw_reg_write(ah, s_seq[i],
-						AR5K_QUEUE_DCU_SEQNUM(i));
-			} else {
-				ath5k_hw_reg_write(ah, s_seq[0],
-					AR5K_QUEUE_DCU_SEQNUM(0));
-			}
-
-
-			if (ah->ah_version == AR5K_AR5211) {
-				ath5k_hw_reg_write(ah, tsf_up, AR5K_TSF_U32);
-				ath5k_hw_reg_write(ah, tsf_lo, AR5K_TSF_L32);
-			}
-		}
-
-		ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA);
-	}
-
-	/* Ledstate */
-	AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]);
-
-	/* Gpio settings */
-	ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR);
-	ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO);
-
-	/* Restore sta_id flags and preserve our mac address*/
-	ath5k_hw_reg_write(ah, AR5K_LOW_ID(ah->ah_sta_id),
-						AR5K_STA_ID0);
-	ath5k_hw_reg_write(ah, staid1_flags | AR5K_HIGH_ID(ah->ah_sta_id),
-						AR5K_STA_ID1);
-
-
-	/*
-	 * Configure PCU
-	 */
-
-	/* Restore bssid and bssid mask */
-	/* XXX: add ah->aid once mac80211 gives this to us */
-	ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
-
-	/* Set PCU config */
-	ath5k_hw_set_opmode(ah);
-
-	/* Clear any pending interrupts
-	 * PISR/SISR Not available on 5210 */
-	if (ah->ah_version != AR5K_AR5210)
-		ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR);
-
-	/* Set RSSI/BRSSI thresholds
-	 *
-	 * Note: If we decide to set this value
-	 * dynamicaly, have in mind that when AR5K_RSSI_THR
-	 * register is read it might return 0x40 if we haven't
-	 * wrote anything to it plus BMISS RSSI threshold is zeroed.
-	 * So doing a save/restore procedure here isn't the right
-	 * choice. Instead store it on ath5k_hw */
-	ath5k_hw_reg_write(ah, (AR5K_TUNE_RSSI_THRES |
-				AR5K_TUNE_BMISS_THRES <<
-				AR5K_RSSI_THR_BMISS_S),
-				AR5K_RSSI_THR);
-
-	/* MIC QoS support */
-	if (ah->ah_mac_srev >= AR5K_SREV_AR2413) {
-		ath5k_hw_reg_write(ah, 0x000100aa, AR5K_MIC_QOS_CTL);
-		ath5k_hw_reg_write(ah, 0x00003210, AR5K_MIC_QOS_SEL);
-	}
-
-	/* QoS NOACK Policy */
-	if (ah->ah_version == AR5K_AR5212) {
-		ath5k_hw_reg_write(ah,
-			AR5K_REG_SM(2, AR5K_QOS_NOACK_2BIT_VALUES) |
-			AR5K_REG_SM(5, AR5K_QOS_NOACK_BIT_OFFSET)  |
-			AR5K_REG_SM(0, AR5K_QOS_NOACK_BYTE_OFFSET),
-			AR5K_QOS_NOACK);
-	}
-
-
-	/*
-	 * Configure PHY
-	 */
-
-	/* Set channel on PHY */
-	ret = ath5k_hw_channel(ah, channel);
-	if (ret)
-		return ret;
-
-	/*
-	 * Enable the PHY and wait until completion
-	 * This includes BaseBand and Synthesizer
-	 * activation.
-	 */
-	ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
-
-	/*
-	 * On 5211+ read activation -> rx delay
-	 * and use it.
-	 *
-	 * TODO: Half/quarter rate support
-	 */
-	if (ah->ah_version != AR5K_AR5210) {
-		u32 delay;
-		delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
-			AR5K_PHY_RX_DELAY_M;
-		delay = (channel->hw_value & CHANNEL_CCK) ?
-			((delay << 2) / 22) : (delay / 10);
-
-		udelay(100 + (2 * delay));
-	} else {
-		mdelay(1);
-	}
-
-	/*
-	 * Perform ADC test to see if baseband is ready
-	 * Set tx hold and check adc test register
-	 */
-	phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
-	ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
-	for (i = 0; i <= 20; i++) {
-		if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
-			break;
-		udelay(200);
-	}
-	ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1);
-
-	/*
-	 * Start automatic gain control calibration
-	 *
-	 * During AGC calibration RX path is re-routed to
-	 * a power detector so we don't receive anything.
-	 *
-	 * This method is used to calibrate some static offsets
-	 * used together with on-the fly I/Q calibration (the
-	 * one performed via ath5k_hw_phy_calibrate), that doesn't
-	 * interrupt rx path.
-	 *
-	 * While rx path is re-routed to the power detector we also
-	 * start a noise floor calibration, to measure the
-	 * card's noise floor (the noise we measure when we are not
-	 * transmiting or receiving anything).
-	 *
-	 * If we are in a noisy environment AGC calibration may time
-	 * out and/or noise floor calibration might timeout.
-	 */
-	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
-				AR5K_PHY_AGCCTL_CAL);
-
-	/* At the same time start I/Q calibration for QAM constellation
-	 * -no need for CCK- */
-	ah->ah_calibration = false;
-	if (!(mode == AR5K_MODE_11B)) {
-		ah->ah_calibration = true;
-		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
-				AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
-		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
-				AR5K_PHY_IQ_RUN);
-	}
-
-	/* Wait for gain calibration to finish (we check for I/Q calibration
-	 * during ath5k_phy_calibrate) */
-	if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
-			AR5K_PHY_AGCCTL_CAL, 0, false)) {
-		ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n",
-			channel->center_freq);
-	}
-
-	/*
-	 * If we run NF calibration before AGC, it always times out.
-	 * Binary HAL starts NF and AGC calibration at the same time
-	 * and only waits for AGC to finish. Also if AGC or NF cal.
-	 * times out, reset doesn't fail on binary HAL. I believe
-	 * that's wrong because since rx path is routed to a detector,
-	 * if cal. doesn't finish we won't have RX. Sam's HAL for AR5210/5211
-	 * enables noise floor calibration after offset calibration and if noise
-	 * floor calibration fails, reset fails. I believe that's
-	 * a better approach, we just need to find a polling interval
-	 * that suits best, even if reset continues we need to make
-	 * sure that rx path is ready.
-	 */
-	ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
-
-
-	/*
-	 * Configure QCUs/DCUs
-	 */
-
-	/* TODO: HW Compression support for data queues */
-	/* TODO: Burst prefetch for data queues */
-
-	/*
-	 * Reset queues and start beacon timers at the end of the reset routine
-	 * This also sets QCU mask on each DCU for 1:1 qcu to dcu mapping
-	 * Note: If we want we can assign multiple qcus on one dcu.
-	 */
-	for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) {
-		ret = ath5k_hw_reset_tx_queue(ah, i);
-		if (ret) {
-			ATH5K_ERR(ah->ah_sc,
-				"failed to reset TX queue #%d\n", i);
-			return ret;
-		}
-	}
-
-
-	/*
-	 * Configure DMA/Interrupts
-	 */
-
-	/*
-	 * Set Rx/Tx DMA Configuration
-	 *
-	 * Set standard DMA size (128). Note that
-	 * a DMA size of 512 causes rx overruns and tx errors
-	 * on pci-e cards (tested on 5424 but since rx overruns
-	 * also occur on 5416/5418 with madwifi we set 128
-	 * for all PCI-E cards to be safe).
-	 *
-	 * XXX: need to check 5210 for this
-	 * TODO: Check out tx triger level, it's always 64 on dumps but I
-	 * guess we can tweak it and see how it goes ;-)
-	 */
-	if (ah->ah_version != AR5K_AR5210) {
-		AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
-			AR5K_TXCFG_SDMAMR, AR5K_DMASIZE_128B);
-		AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG,
-			AR5K_RXCFG_SDMAMW, AR5K_DMASIZE_128B);
-	}
-
-	/* Pre-enable interrupts on 5211/5212*/
-	if (ah->ah_version != AR5K_AR5210)
-		ath5k_hw_set_imr(ah, ah->ah_imr);
-
-	/*
-	 * Setup RFKill interrupt if rfkill flag is set on eeprom.
-	 * TODO: Use gpio pin and polarity infos from eeprom
-	 * TODO: Handle this in ath5k_intr because it'll result
-	 * 	 a nasty interrupt storm.
-	 */
-#if 0
-	if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) {
-		ath5k_hw_set_gpio_input(ah, 0);
-		ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0);
-		if (ah->ah_gpio[0] == 0)
-			ath5k_hw_set_gpio_intr(ah, 0, 1);
-		else
-			ath5k_hw_set_gpio_intr(ah, 0, 0);
-	}
-#endif
-
-	/* Enable 32KHz clock function for AR5212+ chips
-	 * Set clocks to 32KHz operation and use an
-	 * external 32KHz crystal when sleeping if one
-	 * exists */
-	if (ah->ah_version == AR5K_AR5212)
-			ath5k_hw_set_sleep_clock(ah, true);
-
-	/*
-	 * Disable beacons and reset the register
-	 */
-	AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE |
-			AR5K_BEACON_RESET_TSF);
-
-	return 0;
-}
-
-#undef _ATH5K_RESET