Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

15 files changed, 216 insertions, 119 deletions

diff --git a/drivers/net/wireless/ath/ar9170/ar9170.h b/drivers/net/wireless/ath/ar9170/ar9170.h
index ec034af2698..9f9459860d8 100644
--- a/drivers/net/wireless/ath/ar9170/ar9170.h
+++ b/drivers/net/wireless/ath/ar9170/ar9170.h
@@ -231,7 +231,7 @@ struct ar9170 {
 	struct sk_buff_head tx_status_ampdu;
 	spinlock_t tx_ampdu_list_lock;
 	struct list_head tx_ampdu_list;
-	unsigned int tx_ampdu_pending;
+	atomic_t tx_ampdu_pending;
 
 	/* rxstream mpdu merge */
 	struct ar9170_rxstream_mpdu_merge rx_mpdu;
diff --git a/drivers/net/wireless/ath/ar9170/hw.h b/drivers/net/wireless/ath/ar9170/hw.h
index 88113148331..701ddb7d840 100644
--- a/drivers/net/wireless/ath/ar9170/hw.h
+++ b/drivers/net/wireless/ath/ar9170/hw.h
@@ -152,14 +152,14 @@ enum ar9170_cmd {
 #define		AR9170_MAC_REG_FTF_BIT14		BIT(14)
 #define		AR9170_MAC_REG_FTF_BIT15		BIT(15)
 #define		AR9170_MAC_REG_FTF_BAR			BIT(24)
-#define		AR9170_MAC_REG_FTF_BIT25		BIT(25)
+#define		AR9170_MAC_REG_FTF_BA			BIT(25)
 #define		AR9170_MAC_REG_FTF_PSPOLL		BIT(26)
 #define		AR9170_MAC_REG_FTF_RTS			BIT(27)
 #define		AR9170_MAC_REG_FTF_CTS			BIT(28)
 #define		AR9170_MAC_REG_FTF_ACK			BIT(29)
 #define		AR9170_MAC_REG_FTF_CFE			BIT(30)
 #define		AR9170_MAC_REG_FTF_CFE_ACK		BIT(31)
-#define		AR9170_MAC_REG_FTF_DEFAULTS		0x0500ffff
+#define		AR9170_MAC_REG_FTF_DEFAULTS		0x0700ffff
 #define		AR9170_MAC_REG_FTF_MONITOR		0xfd00ffff
 
 #define AR9170_MAC_REG_RX_TOTAL			(AR9170_MAC_REG_BASE + 0x6A0)
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index de0ba2bf769..7e59b82e64d 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -414,9 +414,9 @@ static void ar9170_tx_ampdu_callback(struct ar9170 *ar, struct sk_buff *skb)
 
 	skb_queue_tail(&ar->tx_status_ampdu, skb);
 	ar9170_tx_fake_ampdu_status(ar);
-	ar->tx_ampdu_pending--;
 
-	if (!list_empty(&ar->tx_ampdu_list) && !ar->tx_ampdu_pending)
+	if (atomic_dec_and_test(&ar->tx_ampdu_pending) &&
+	    !list_empty(&ar->tx_ampdu_list))
 		ar9170_tx_ampdu(ar);
 }
 
@@ -1248,6 +1248,7 @@ static int ar9170_op_start(struct ieee80211_hw *hw)
 	ar->global_ampdu_density = 6;
 	ar->global_ampdu_factor = 3;
 
+	atomic_set(&ar->tx_ampdu_pending, 0);
 	ar->bad_hw_nagger = jiffies;
 
 	err = ar->open(ar);
@@ -1773,7 +1774,7 @@ static void ar9170_tx(struct ar9170 *ar)
 					  msecs_to_jiffies(AR9170_TX_TIMEOUT);
 
 			if (arinfo->flags == AR9170_TX_FLAG_BLOCK_ACK)
-				ar->tx_ampdu_pending++;
+				atomic_inc(&ar->tx_ampdu_pending);
 
 #ifdef AR9170_QUEUE_DEBUG
 			printk(KERN_DEBUG "%s: send frame q:%d =>\n",
@@ -1784,7 +1785,7 @@ static void ar9170_tx(struct ar9170 *ar)
 			err = ar->tx(ar, skb);
 			if (unlikely(err)) {
 				if (arinfo->flags == AR9170_TX_FLAG_BLOCK_ACK)
-					ar->tx_ampdu_pending--;
+					atomic_dec(&ar->tx_ampdu_pending);
 
 				frames_failed++;
 				dev_kfree_skb_any(skb);
@@ -1931,7 +1932,7 @@ int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	if (info->flags & IEEE80211_TX_CTL_AMPDU) {
 		bool run = ar9170_tx_ampdu_queue(ar, skb);
 
-		if (run || !ar->tx_ampdu_pending)
+		if (run || !atomic_read(&ar->tx_ampdu_pending))
 			ar9170_tx_ampdu(ar);
 	} else {
 		unsigned int queue = skb_get_queue_mapping(skb);
diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c
index e974e5829e1..6bdcdf6d1cc 100644
--- a/drivers/net/wireless/ath/ar9170/usb.c
+++ b/drivers/net/wireless/ath/ar9170/usb.c
@@ -108,15 +108,15 @@ static void ar9170_usb_submit_urb(struct ar9170_usb *aru)
 		return ;
 
 	spin_lock_irqsave(&aru->tx_urb_lock, flags);
-	if (aru->tx_submitted_urbs >= AR9170_NUM_TX_URBS) {
+	if (atomic_read(&aru->tx_submitted_urbs) >= AR9170_NUM_TX_URBS) {
 		spin_unlock_irqrestore(&aru->tx_urb_lock, flags);
 		return ;
 	}
-	aru->tx_submitted_urbs++;
+	atomic_inc(&aru->tx_submitted_urbs);
 
 	urb = usb_get_from_anchor(&aru->tx_pending);
 	if (!urb) {
-		aru->tx_submitted_urbs--;
+		atomic_dec(&aru->tx_submitted_urbs);
 		spin_unlock_irqrestore(&aru->tx_urb_lock, flags);
 
 		return ;
@@ -133,7 +133,7 @@ static void ar9170_usb_submit_urb(struct ar9170_usb *aru)
 				err);
 
 		usb_unanchor_urb(urb);
-		aru->tx_submitted_urbs--;
+		atomic_dec(&aru->tx_submitted_urbs);
 		ar9170_tx_callback(&aru->common, urb->context);
 	}
 
@@ -151,7 +151,7 @@ static void ar9170_usb_tx_urb_complete_frame(struct urb *urb)
 		return ;
 	}
 
-	aru->tx_submitted_urbs--;
+	atomic_dec(&aru->tx_submitted_urbs);
 
 	ar9170_tx_callback(&aru->common, skb);
 
@@ -794,7 +794,7 @@ static int ar9170_usb_probe(struct usb_interface *intf,
 	spin_lock_init(&aru->tx_urb_lock);
 
 	aru->tx_pending_urbs = 0;
-	aru->tx_submitted_urbs = 0;
+	atomic_set(&aru->tx_submitted_urbs, 0);
 
 	aru->common.stop = ar9170_usb_stop;
 	aru->common.flush = ar9170_usb_flush;
diff --git a/drivers/net/wireless/ath/ar9170/usb.h b/drivers/net/wireless/ath/ar9170/usb.h
index d098f4d5d2f..a2ce3b169ce 100644
--- a/drivers/net/wireless/ath/ar9170/usb.h
+++ b/drivers/net/wireless/ath/ar9170/usb.h
@@ -67,7 +67,7 @@ struct ar9170_usb {
 	bool req_one_stage_fw;
 
 	spinlock_t tx_urb_lock;
-	unsigned int tx_submitted_urbs;
+	atomic_t tx_submitted_urbs;
 	unsigned int tx_pending_urbs;
 
 	struct completion cmd_wait;
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 647d826bf5f..6a2a9676111 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -198,6 +198,7 @@
 #define AR5K_TUNE_CWMAX_11B			1023
 #define AR5K_TUNE_CWMAX_XR			7
 #define AR5K_TUNE_NOISE_FLOOR			-72
+#define AR5K_TUNE_CCA_MAX_GOOD_VALUE		-95
 #define AR5K_TUNE_MAX_TXPOWER			63
 #define AR5K_TUNE_DEFAULT_TXPOWER		25
 #define AR5K_TUNE_TPC_TXPOWER			false
@@ -1006,6 +1007,14 @@ struct ath5k_capabilities {
 	} cap_queues;
 };
 
+/* size of noise floor history (keep it a power of two) */
+#define ATH5K_NF_CAL_HIST_MAX	8
+struct ath5k_nfcal_hist
+{
+	s16 index;				/* current index into nfval */
+	s16 nfval[ATH5K_NF_CAL_HIST_MAX];	/* last few noise floors */
+};
+
 
 /***************************************\
   HARDWARE ABSTRACTION LAYER STRUCTURE
@@ -1112,6 +1121,8 @@ struct ath5k_hw {
 		struct ieee80211_channel r_last_channel;
 	} ah_radar;
 
+	struct ath5k_nfcal_hist ah_nfcal_hist;
+
 	/* noise floor from last periodic calibration */
 	s32			ah_noise_floor;
 
@@ -1274,8 +1285,10 @@ extern int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah);
 extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags);
 extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel);
 /* PHY calibration */
+void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah);
 extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel);
 extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
+extern s16 ath5k_hw_get_noise_floor(struct ath5k_hw *ah);
 extern void ath5k_hw_calibration_poll(struct ath5k_hw *ah);
 /* Spur mitigation */
 bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c
index 92995adeb5c..42284445b75 100644
--- a/drivers/net/wireless/ath/ath5k/attach.c
+++ b/drivers/net/wireless/ath/ath5k/attach.c
@@ -331,6 +331,8 @@ int ath5k_hw_attach(struct ath5k_softc *sc)
 
 	ath5k_hw_rfgain_opt_init(ah);
 
+	ath5k_hw_init_nfcal_hist(ah);
+
 	/* turn on HW LEDs */
 	ath5k_hw_set_ledstate(ah, AR5K_LED_INIT);
 
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 1a039f2bd73..895990751d3 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -1124,77 +1124,148 @@ ath5k_hw_calibration_poll(struct ath5k_hw *ah)
 		ah->ah_swi_mask = AR5K_SWI_FULL_CALIBRATION;
 		AR5K_REG_ENABLE_BITS(ah, AR5K_CR, AR5K_CR_SWI);
 	}
+}
 
+static int sign_extend(int val, const int nbits)
+{
+	int order = BIT(nbits-1);
+	return (val ^ order) - order;
 }
 
-/**
- * ath5k_hw_noise_floor_calibration - perform PHY noise floor calibration
- *
- * @ah: struct ath5k_hw pointer we are operating on
- * @freq: the channel frequency, just used for error logging
- *
- * This function performs a noise floor calibration of the PHY and waits for
- * it to complete. Then the noise floor value is compared to some maximum
- * noise floor we consider valid.
- *
- * Note that this is different from what the madwifi HAL does: it reads the
- * noise floor and afterwards initiates the calibration. Since the noise floor
- * calibration can take some time to finish, depending on the current channel
- * use, that avoids the occasional timeout warnings we are seeing now.
- *
- * See the following link for an Atheros patent on noise floor calibration:
- * http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO1&Sect2=HITOFF&d=PALL \
- * &p=1&u=%2Fnetahtml%2FPTO%2Fsrchnum.htm&r=1&f=G&l=50&s1=7245893.PN.&OS=PN/7
+static s32 ath5k_hw_read_measured_noise_floor(struct ath5k_hw *ah)
+{
+	s32 val;
+
+	val = ath5k_hw_reg_read(ah, AR5K_PHY_NF);
+	return sign_extend(AR5K_REG_MS(val, AR5K_PHY_NF_MINCCA_PWR), 9);
+}
+
+void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah)
+{
+	int i;
+
+	ah->ah_nfcal_hist.index = 0;
+	for (i = 0; i < ATH5K_NF_CAL_HIST_MAX; i++)
+		ah->ah_nfcal_hist.nfval[i] = AR5K_TUNE_CCA_MAX_GOOD_VALUE;
+}
+
+static void ath5k_hw_update_nfcal_hist(struct ath5k_hw *ah, s16 noise_floor)
+{
+	struct ath5k_nfcal_hist *hist = &ah->ah_nfcal_hist;
+	hist->index = (hist->index + 1) & (ATH5K_NF_CAL_HIST_MAX-1);
+	hist->nfval[hist->index] = noise_floor;
+}
+
+static s16 ath5k_hw_get_median_noise_floor(struct ath5k_hw *ah)
+{
+	s16 sort[ATH5K_NF_CAL_HIST_MAX];
+	s16 tmp;
+	int i, j;
+
+	memcpy(sort, ah->ah_nfcal_hist.nfval, sizeof(sort));
+	for (i = 0; i < ATH5K_NF_CAL_HIST_MAX - 1; i++) {
+		for (j = 1; j < ATH5K_NF_CAL_HIST_MAX - i; j++) {
+			if (sort[j] > sort[j-1]) {
+				tmp = sort[j];
+				sort[j] = sort[j-1];
+				sort[j-1] = tmp;
+			}
+		}
+	}
+	for (i = 0; i < ATH5K_NF_CAL_HIST_MAX; i++) {
+		ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+			"cal %d:%d\n", i, sort[i]);
+	}
+	return sort[(ATH5K_NF_CAL_HIST_MAX-1) / 2];
+}
+
+/*
+ * When we tell the hardware to perform a noise floor calibration
+ * by setting the AR5K_PHY_AGCCTL_NF bit, it will periodically
+ * sample-and-hold the minimum noise level seen at the antennas.
+ * This value is then stored in a ring buffer of recently measured
+ * noise floor values so we have a moving window of the last few
+ * samples.
  *
- * XXX: Since during noise floor calibration antennas are detached according to
- * the patent, we should stop tx queues here.
+ * The median of the values in the history is then loaded into the
+ * hardware for its own use for RSSI and CCA measurements.
  */
-int
-ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq)
+void ath5k_hw_update_noise_floor(struct ath5k_hw *ah)
 {
-	int ret;
-	unsigned int i;
-	s32 noise_floor;
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	u32 val;
+	s16 nf, threshold;
+	u8 ee_mode;
 
-	/*
-	 * Enable noise floor calibration
-	 */
-	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
-				AR5K_PHY_AGCCTL_NF);
+	/* keep last value if calibration hasn't completed */
+	if (ath5k_hw_reg_read(ah, AR5K_PHY_AGCCTL) & AR5K_PHY_AGCCTL_NF) {
+		ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+			"NF did not complete in calibration window\n");
 
-	ret = ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
-			AR5K_PHY_AGCCTL_NF, 0, false);
-	if (ret) {
-		ATH5K_ERR(ah->ah_sc,
-			"noise floor calibration timeout (%uMHz)\n", freq);
-		return -EAGAIN;
+		return;
 	}
 
-	/* Wait until the noise floor is calibrated and read the value */
-	for (i = 20; i > 0; i--) {
-		mdelay(1);
-		noise_floor = ath5k_hw_reg_read(ah, AR5K_PHY_NF);
-		noise_floor = AR5K_PHY_NF_RVAL(noise_floor);
-		if (noise_floor & AR5K_PHY_NF_ACTIVE) {
-			noise_floor = AR5K_PHY_NF_AVAL(noise_floor);
-
-			if (noise_floor <= AR5K_TUNE_NOISE_FLOOR)
-				break;
-		}
+	switch (ah->ah_current_channel->hw_value & CHANNEL_MODES) {
+	case CHANNEL_A:
+	case CHANNEL_T:
+	case CHANNEL_XR:
+		ee_mode = AR5K_EEPROM_MODE_11A;
+		break;
+	case CHANNEL_G:
+	case CHANNEL_TG:
+		ee_mode = AR5K_EEPROM_MODE_11G;
+		break;
+	default:
+	case CHANNEL_B:
+		ee_mode = AR5K_EEPROM_MODE_11B;
+		break;
 	}
 
-	ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
-		"noise floor %d\n", noise_floor);
 
-	if (noise_floor > AR5K_TUNE_NOISE_FLOOR) {
-		ATH5K_ERR(ah->ah_sc,
-			"noise floor calibration failed (%uMHz)\n", freq);
-		return -EAGAIN;
+	/* completed NF calibration, test threshold */
+	nf = ath5k_hw_read_measured_noise_floor(ah);
+	threshold = ee->ee_noise_floor_thr[ee_mode];
+
+	if (nf > threshold) {
+		ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+			"noise floor failure detected; "
+			"read %d, threshold %d\n",
+			nf, threshold);
+
+		nf = AR5K_TUNE_CCA_MAX_GOOD_VALUE;
 	}
 
-	ah->ah_noise_floor = noise_floor;
+	ath5k_hw_update_nfcal_hist(ah, nf);
+	nf = ath5k_hw_get_median_noise_floor(ah);
 
-	return 0;
+	/* load noise floor (in .5 dBm) so the hardware will use it */
+	val = ath5k_hw_reg_read(ah, AR5K_PHY_NF) & ~AR5K_PHY_NF_M;
+	val |= (nf * 2) & AR5K_PHY_NF_M;
+	ath5k_hw_reg_write(ah, val, AR5K_PHY_NF);
+
+	AR5K_REG_MASKED_BITS(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_NF,
+		~(AR5K_PHY_AGCCTL_NF_EN | AR5K_PHY_AGCCTL_NF_NOUPDATE));
+
+	ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_NF,
+		0, false);
+
+	/*
+	 * Load a high max CCA Power value (-50 dBm in .5 dBm units)
+	 * so that we're not capped by the median we just loaded.
+	 * This will be used as the initial value for the next noise
+	 * floor calibration.
+	 */
+	val = (val & ~AR5K_PHY_NF_M) | ((-50 * 2) & AR5K_PHY_NF_M);
+	ath5k_hw_reg_write(ah, val, AR5K_PHY_NF);
+	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+		AR5K_PHY_AGCCTL_NF_EN |
+		AR5K_PHY_AGCCTL_NF_NOUPDATE |
+		AR5K_PHY_AGCCTL_NF);
+
+	ah->ah_noise_floor = nf;
+
+	ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+		"noise floor calibrated: %d\n", nf);
 }
 
 /*
@@ -1287,7 +1358,7 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah,
 		return ret;
 	}
 
-	ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
+	ath5k_hw_update_noise_floor(ah);
 
 	/*
 	 * Re-enable RX/TX and beacons
@@ -1360,7 +1431,7 @@ done:
 	 * since noise floor calibration interrupts rx path while I/Q
 	 * calibration doesn't. We don't need to run noise floor calibration
 	 * as often as I/Q calibration.*/
-	ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
+	ath5k_hw_update_noise_floor(ah);
 
 	/* Initiate a gain_F calibration */
 	ath5k_hw_request_rfgain_probe(ah);
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index 64227abe3c2..4cb9c5df9f4 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -2033,17 +2033,14 @@
 #define	AR5K_PHY_AGCCTL_NF_NOUPDATE	0x00020000	/* Don't update nf automaticaly */
 
 /*
- * PHY noise floor status register
+ * PHY noise floor status register (CCA = Clear Channel Assessment)
  */
 #define AR5K_PHY_NF			0x9864			/* Register address */
-#define AR5K_PHY_NF_M			0x000001ff	/* Noise floor mask */
-#define AR5K_PHY_NF_ACTIVE		0x00000100	/* Noise floor calibration still active */
-#define AR5K_PHY_NF_RVAL(_n)		(((_n) >> 19) & AR5K_PHY_NF_M)
-#define AR5K_PHY_NF_AVAL(_n)		(-((_n) ^ AR5K_PHY_NF_M) + 1)
-#define AR5K_PHY_NF_SVAL(_n)		(((_n) & AR5K_PHY_NF_M) | (1 << 9))
+#define AR5K_PHY_NF_M			0x000001ff	/* Noise floor, written to hardware in 1/2 dBm units */
+#define AR5K_PHY_NF_SVAL(_n)           (((_n) & AR5K_PHY_NF_M) | (1 << 9))
 #define	AR5K_PHY_NF_THRESH62		0x0007f000	/* Thresh62 -check ANI patent- (field) */
 #define	AR5K_PHY_NF_THRESH62_S		12
-#define	AR5K_PHY_NF_MINCCA_PWR		0x0ff80000	/* ??? */
+#define	AR5K_PHY_NF_MINCCA_PWR		0x0ff80000	/* Minimum measured noise level, read from hardware in 1 dBm units */
 #define	AR5K_PHY_NF_MINCCA_PWR_S	19
 
 /*
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 3dab3d856d7..62954fc7786 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -1293,7 +1293,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 	 * out and/or noise floor calibration might timeout.
 	 */
 	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
-				AR5K_PHY_AGCCTL_CAL);
+				AR5K_PHY_AGCCTL_CAL | AR5K_PHY_AGCCTL_NF);
 
 	/* At the same time start I/Q calibration for QAM constellation
 	 * -no need for CCK- */
@@ -1314,21 +1314,6 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 			channel->center_freq);
 	}
 
-	/*
-	 * If we run NF calibration before AGC, it always times out.
-	 * Binary HAL starts NF and AGC calibration at the same time
-	 * and only waits for AGC to finish. Also if AGC or NF cal.
-	 * times out, reset doesn't fail on binary HAL. I believe
-	 * that's wrong because since rx path is routed to a detector,
-	 * if cal. doesn't finish we won't have RX. Sam's HAL for AR5210/5211
-	 * enables noise floor calibration after offset calibration and if noise
-	 * floor calibration fails, reset fails. I believe that's
-	 * a better approach, we just need to find a polling interval
-	 * that suits best, even if reset continues we need to make
-	 * sure that rx path is ready.
-	 */
-	ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
-
 	/* Restore antenna mode */
 	ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode);
 
diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c
index 33c9e816718..25531f231b6 100644
--- a/drivers/net/wireless/ath/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
@@ -29,15 +29,13 @@ static void ath_ahb_read_cachesize(struct ath_common *common, int *csz)
 
 static void ath_ahb_cleanup(struct ath_common *common)
 {
-	struct ath_hw *ah = (struct ath_hw *) common->ah;
-	struct ath_softc *sc = ah->ah_sc;
+	struct ath_softc *sc = (struct ath_softc *)common->priv;
 	iounmap(sc->mem);
 }
 
 static bool ath_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data)
 {
-	struct ath_hw *ah = (struct ath_hw *) common->ah;
-	struct ath_softc *sc = ah->ah_sc;
+	struct ath_softc *sc = (struct ath_softc *)common->priv;
 	struct platform_device *pdev = to_platform_device(sc->dev);
 	struct ath9k_platform_data *pdata;
 
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index f46bd05df44..551f8801459 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -813,7 +813,7 @@ static void ath9k_olc_temp_compensation(struct ath_hw *ah)
 	}
 }
 
-static void ath9k_hw_9271_pa_cal(struct ath_hw *ah)
+static void ath9k_hw_9271_pa_cal(struct ath_hw *ah, bool is_reset)
 {
 	u32 regVal;
 	unsigned int i;
@@ -889,10 +889,19 @@ static void ath9k_hw_9271_pa_cal(struct ath_hw *ah)
 		REG_WRITE(ah, 0x7834, regVal);
 	}
 
-	/*  Empirical offset correction  */
-#if 0
-	REG_RMW_FIELD(ah, AR9285_AN_RF2G6, AR9271_AN_RF2G6_OFFS, 0x20);
-#endif
+	regVal = (regVal >>20) & 0x7f;
+
+	/* Update PA cal info */
+	if ((!is_reset) && (ah->pacal_info.prev_offset == regVal)) {
+		if (ah->pacal_info.max_skipcount < MAX_PACAL_SKIPCOUNT)
+			ah->pacal_info.max_skipcount =
+				2 * ah->pacal_info.max_skipcount;
+		ah->pacal_info.skipcount = ah->pacal_info.max_skipcount;
+	} else {
+		ah->pacal_info.max_skipcount = 1;
+		ah->pacal_info.skipcount = 0;
+		ah->pacal_info.prev_offset = regVal;
+	}
 
 	regVal = REG_READ(ah, 0x7834);
 	regVal |= 0x1;
@@ -1043,7 +1052,7 @@ bool ath9k_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan,
 	if (longcal) {
 		/* Do periodic PAOffset Cal */
 		if (AR_SREV_9271(ah))
-			ath9k_hw_9271_pa_cal(ah);
+			ath9k_hw_9271_pa_cal(ah, false);
 		else if (AR_SREV_9285_11_OR_LATER(ah)) {
 			if (!ah->pacal_info.skipcount)
 				ath9k_hw_9285_pa_cal(ah, false);
@@ -1070,6 +1079,7 @@ bool ath9k_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan,
 }
 EXPORT_SYMBOL(ath9k_hw_calibrate);
 
+/* Carrier leakage Calibration fix */
 static bool ar9285_clc(struct ath_hw *ah, struct ath9k_channel *chan)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
@@ -1115,7 +1125,7 @@ bool ath9k_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
 
-	if (AR_SREV_9285_12_OR_LATER(ah)) {
+	if (AR_SREV_9271(ah) || AR_SREV_9285_12_OR_LATER(ah)) {
 		if (!ar9285_clc(ah, chan))
 			return false;
 	} else {
@@ -1151,7 +1161,9 @@ bool ath9k_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan)
 	}
 
 	/* Do PA Calibration */
-	if (AR_SREV_9285_11_OR_LATER(ah))
+	if (AR_SREV_9271(ah))
+		ath9k_hw_9271_pa_cal(ah, true);
+	else if (AR_SREV_9285_11_OR_LATER(ah))
 		ath9k_hw_9285_pa_cal(ah, true);
 
 	/* Do NF Calibration after DC offset and other calibrations */
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index a8620b1d091..2a4efcbced6 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2079,7 +2079,9 @@ static void ath_tx_complete_poll_work(struct work_struct *work)
 	if (needreset) {
 		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_RESET,
 			  "tx hung, resetting the chip\n");
+		ath9k_ps_wakeup(sc);
 		ath_reset(sc, false);
+		ath9k_ps_restore(sc);
 	}
 
 	ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work,
diff --git a/drivers/net/wireless/ath/regd.h b/drivers/net/wireless/ath/regd.h
index c1dd857697a..a1c39526161 100644
--- a/drivers/net/wireless/ath/regd.h
+++ b/drivers/net/wireless/ath/regd.h
@@ -65,10 +65,13 @@ enum CountryCode {
 	CTRY_ALGERIA = 12,
 	CTRY_ARGENTINA = 32,
 	CTRY_ARMENIA = 51,
+	CTRY_ARUBA = 533,
 	CTRY_AUSTRALIA = 36,
 	CTRY_AUSTRIA = 40,
 	CTRY_AZERBAIJAN = 31,
 	CTRY_BAHRAIN = 48,
+	CTRY_BANGLADESH = 50,
+	CTRY_BARBADOS = 52,
 	CTRY_BELARUS = 112,
 	CTRY_BELGIUM = 56,
 	CTRY_BELIZE = 84,
@@ -77,6 +80,7 @@ enum CountryCode {
 	CTRY_BRAZIL = 76,
 	CTRY_BRUNEI_DARUSSALAM = 96,
 	CTRY_BULGARIA = 100,
+	CTRY_CAMBODIA = 116,
 	CTRY_CANADA = 124,
 	CTRY_CHILE = 152,
 	CTRY_CHINA = 156,
@@ -97,7 +101,11 @@ enum CountryCode {
 	CTRY_GEORGIA = 268,
 	CTRY_GERMANY = 276,
 	CTRY_GREECE = 300,
+	CTRY_GREENLAND = 304,
+	CTRY_GRENEDA = 308,
+	CTRY_GUAM = 316,
 	CTRY_GUATEMALA = 320,
+	CTRY_HAITI = 332,
 	CTRY_HONDURAS = 340,
 	CTRY_HONG_KONG = 344,
 	CTRY_HUNGARY = 348,
diff --git a/drivers/net/wireless/ath/regd_common.h b/drivers/net/wireless/ath/regd_common.h
index 9847af72208..248c670fdfb 100644
--- a/drivers/net/wireless/ath/regd_common.h
+++ b/drivers/net/wireless/ath/regd_common.h
@@ -288,13 +288,16 @@ static struct country_code_to_enum_rd allCountries[] = {
 	{CTRY_DEFAULT, FCC1_FCCA, "CO"},
 	{CTRY_ALBANIA, NULL1_WORLD, "AL"},
 	{CTRY_ALGERIA, NULL1_WORLD, "DZ"},
-	{CTRY_ARGENTINA, APL3_WORLD, "AR"},
+	{CTRY_ARGENTINA, FCC3_WORLD, "AR"},
 	{CTRY_ARMENIA, ETSI4_WORLD, "AM"},
+	{CTRY_ARUBA, ETSI1_WORLD, "AW"},
 	{CTRY_AUSTRALIA, FCC2_WORLD, "AU"},
 	{CTRY_AUSTRALIA2, FCC6_WORLD, "AU"},
 	{CTRY_AUSTRIA, ETSI1_WORLD, "AT"},
 	{CTRY_AZERBAIJAN, ETSI4_WORLD, "AZ"},
 	{CTRY_BAHRAIN, APL6_WORLD, "BH"},
+	{CTRY_BANGLADESH, NULL1_WORLD, "BD"},
+	{CTRY_BARBADOS, FCC2_WORLD, "BB"},
 	{CTRY_BELARUS, ETSI1_WORLD, "BY"},
 	{CTRY_BELGIUM, ETSI1_WORLD, "BE"},
 	{CTRY_BELGIUM2, ETSI4_WORLD, "BL"},
@@ -304,13 +307,14 @@ static struct country_code_to_enum_rd allCountries[] = {
 	{CTRY_BRAZIL, FCC3_WORLD, "BR"},
 	{CTRY_BRUNEI_DARUSSALAM, APL1_WORLD, "BN"},
 	{CTRY_BULGARIA, ETSI6_WORLD, "BG"},
-	{CTRY_CANADA, FCC2_FCCA, "CA"},
+	{CTRY_CAMBODIA, ETSI1_WORLD, "KH"},
+	{CTRY_CANADA, FCC3_FCCA, "CA"},
 	{CTRY_CANADA2, FCC6_FCCA, "CA"},
 	{CTRY_CHILE, APL6_WORLD, "CL"},
 	{CTRY_CHINA, APL1_WORLD, "CN"},
 	{CTRY_COLOMBIA, FCC1_FCCA, "CO"},
 	{CTRY_COSTA_RICA, FCC1_WORLD, "CR"},
-	{CTRY_CROATIA, ETSI3_WORLD, "HR"},
+	{CTRY_CROATIA, ETSI1_WORLD, "HR"},
 	{CTRY_CYPRUS, ETSI1_WORLD, "CY"},
 	{CTRY_CZECH, ETSI3_WORLD, "CZ"},
 	{CTRY_DENMARK, ETSI1_WORLD, "DK"},
@@ -324,18 +328,22 @@ static struct country_code_to_enum_rd allCountries[] = {
 	{CTRY_GEORGIA, ETSI4_WORLD, "GE"},
 	{CTRY_GERMANY, ETSI1_WORLD, "DE"},
 	{CTRY_GREECE, ETSI1_WORLD, "GR"},
+	{CTRY_GREENLAND, ETSI1_WORLD, "GL"},
+	{CTRY_GRENEDA, FCC3_FCCA, "GD"},
+	{CTRY_GUAM, FCC1_FCCA, "GU"},
 	{CTRY_GUATEMALA, FCC1_FCCA, "GT"},
+	{CTRY_HAITI, ETSI1_WORLD, "HT"},
 	{CTRY_HONDURAS, NULL1_WORLD, "HN"},
-	{CTRY_HONG_KONG, FCC2_WORLD, "HK"},
+	{CTRY_HONG_KONG, FCC3_WORLD, "HK"},
 	{CTRY_HUNGARY, ETSI1_WORLD, "HU"},
 	{CTRY_ICELAND, ETSI1_WORLD, "IS"},
 	{CTRY_INDIA, APL6_WORLD, "IN"},
-	{CTRY_INDONESIA, APL1_WORLD, "ID"},
+	{CTRY_INDONESIA, NULL1_WORLD, "ID"},
 	{CTRY_IRAN, APL1_WORLD, "IR"},
 	{CTRY_IRELAND, ETSI1_WORLD, "IE"},
 	{CTRY_ISRAEL, NULL1_WORLD, "IL"},
 	{CTRY_ITALY, ETSI1_WORLD, "IT"},
-	{CTRY_JAMAICA, ETSI1_WORLD, "JM"},
+	{CTRY_JAMAICA, FCC3_WORLD, "JM"},
 
 	{CTRY_JAPAN, MKK1_MKKA, "JP"},
 	{CTRY_JAPAN1, MKK1_MKKB, "JP"},
@@ -402,7 +410,7 @@ static struct country_code_to_enum_rd allCountries[] = {
 	{CTRY_KOREA_ROC, APL9_WORLD, "KR"},
 	{CTRY_KOREA_ROC2, APL2_WORLD, "K2"},
 	{CTRY_KOREA_ROC3, APL9_WORLD, "K3"},
-	{CTRY_KUWAIT, NULL1_WORLD, "KW"},
+	{CTRY_KUWAIT, ETSI3_WORLD, "KW"},
 	{CTRY_LATVIA, ETSI1_WORLD, "LV"},
 	{CTRY_LEBANON, NULL1_WORLD, "LB"},
 	{CTRY_LIECHTENSTEIN, ETSI1_WORLD, "LI"},
@@ -414,13 +422,13 @@ static struct country_code_to_enum_rd allCountries[] = {
 	{CTRY_MALTA, ETSI1_WORLD, "MT"},
 	{CTRY_MEXICO, FCC1_FCCA, "MX"},
 	{CTRY_MONACO, ETSI4_WORLD, "MC"},
-	{CTRY_MOROCCO, NULL1_WORLD, "MA"},
+	{CTRY_MOROCCO, APL4_WORLD, "MA"},
 	{CTRY_NEPAL, APL1_WORLD, "NP"},
 	{CTRY_NETHERLANDS, ETSI1_WORLD, "NL"},
 	{CTRY_NETHERLANDS_ANTILLES, ETSI1_WORLD, "AN"},
 	{CTRY_NEW_ZEALAND, FCC2_ETSIC, "NZ"},
 	{CTRY_NORWAY, ETSI1_WORLD, "NO"},
-	{CTRY_OMAN, APL6_WORLD, "OM"},
+	{CTRY_OMAN, FCC3_WORLD, "OM"},
 	{CTRY_PAKISTAN, NULL1_WORLD, "PK"},
 	{CTRY_PANAMA, FCC1_FCCA, "PA"},
 	{CTRY_PAPUA_NEW_GUINEA, FCC1_WORLD, "PG"},
@@ -429,7 +437,7 @@ static struct country_code_to_enum_rd allCountries[] = {
 	{CTRY_POLAND, ETSI1_WORLD, "PL"},
 	{CTRY_PORTUGAL, ETSI1_WORLD, "PT"},
 	{CTRY_PUERTO_RICO, FCC1_FCCA, "PR"},
-	{CTRY_QATAR, NULL1_WORLD, "QA"},
+	{CTRY_QATAR, APL1_WORLD, "QA"},
 	{CTRY_ROMANIA, NULL1_WORLD, "RO"},
 	{CTRY_RUSSIA, NULL1_WORLD, "RU"},
 	{CTRY_SAUDI_ARABIA, NULL1_WORLD, "SA"},
@@ -445,7 +453,7 @@ static struct country_code_to_enum_rd allCountries[] = {
 	{CTRY_SYRIA, NULL1_WORLD, "SY"},
 	{CTRY_TAIWAN, APL3_FCCA, "TW"},
 	{CTRY_THAILAND, FCC3_WORLD, "TH"},
-	{CTRY_TRINIDAD_Y_TOBAGO, ETSI4_WORLD, "TT"},
+	{CTRY_TRINIDAD_Y_TOBAGO, FCC3_WORLD, "TT"},
 	{CTRY_TUNISIA, ETSI3_WORLD, "TN"},
 	{CTRY_TURKEY, ETSI3_WORLD, "TR"},
 	{CTRY_UKRAINE, NULL1_WORLD, "UA"},
@@ -456,7 +464,7 @@ static struct country_code_to_enum_rd allCountries[] = {
 	 * would need to assign new special alpha2 to CRDA db as with the world
 	 * regdomain and use another alpha2 */
 	{CTRY_UNITED_STATES_FCC49, FCC4_FCCA, "PS"},
-	{CTRY_URUGUAY, APL2_WORLD, "UY"},
+	{CTRY_URUGUAY, FCC3_WORLD, "UY"},
 	{CTRY_UZBEKISTAN, FCC3_FCCA, "UZ"},
 	{CTRY_VENEZUELA, APL2_ETSIC, "VE"},
 	{CTRY_VIET_NAM, NULL1_WORLD, "VN"},