summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath
diff options
context:
space:
mode:
authorNick Kossifidis <mickflemm@gmail.com>2011-11-25 20:40:22 +0200
committerJohn W. Linville <linville@tuxdriver.com>2011-11-28 14:44:13 -0500
commit34ce644aa8342f95eb1e187178f83febade4af37 (patch)
tree03483c0c1b4c3d3b49b91dabeb645164ed452760 /drivers/net/wireless/ath
parentfea9480786c0fc41901bddb9819dd036527a9e10 (diff)
ath5k: Cleanups v1
No functional changes, just a few comments/documentation/cleanup Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/ath')
-rw-r--r--drivers/net/wireless/ath/ath5k/base.c112
-rw-r--r--drivers/net/wireless/ath/ath5k/dma.c17
2 files changed, 96 insertions, 33 deletions
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index c18d3100897..47194a4e365 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -2149,69 +2149,110 @@ ath5k_intr(int irq, void *dev_id)
enum ath5k_int status;
unsigned int counter = 1000;
+
+ /*
+ * If hw is not ready (or detached) and we get an
+ * interrupt, or if we have no interrupts pending
+ * (that means it's not for us) skip it.
+ *
+ * NOTE: Group 0/1 PCI interface registers are not
+ * supported on WiSOCs, so we can't check for pending
+ * interrupts (ISR belongs to another register group
+ * so we are ok).
+ */
if (unlikely(test_bit(ATH_STAT_INVALID, ah->status) ||
- ((ath5k_get_bus_type(ah) != ATH_AHB) &&
- !ath5k_hw_is_intr_pending(ah))))
+ ((ath5k_get_bus_type(ah) != ATH_AHB) &&
+ !ath5k_hw_is_intr_pending(ah))))
return IRQ_NONE;
+ /** Main loop **/
do {
- ath5k_hw_get_isr(ah, &status); /* NB: clears IRQ too */
+ ath5k_hw_get_isr(ah, &status); /* NB: clears IRQ too */
+
ATH5K_DBG(ah, ATH5K_DEBUG_INTR, "status 0x%x/0x%x\n",
status, ah->imask);
+
+ /*
+ * Fatal hw error -> Log and reset
+ *
+ * Fatal errors are unrecoverable so we have to
+ * reset the card. These errors include bus and
+ * dma errors.
+ */
if (unlikely(status & AR5K_INT_FATAL)) {
- /*
- * Fatal errors are unrecoverable.
- * Typically these are caused by DMA errors.
- */
+
ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
"fatal int, resetting\n");
ieee80211_queue_work(ah->hw, &ah->reset_work);
+
+ /*
+ * RX Overrun -> Count and reset if needed
+ *
+ * Receive buffers are full. Either the bus is busy or
+ * the CPU is not fast enough to process all received
+ * frames.
+ */
} else if (unlikely(status & AR5K_INT_RXORN)) {
+
/*
- * Receive buffers are full. Either the bus is busy or
- * the CPU is not fast enough to process all received
- * frames.
* Older chipsets need a reset to come out of this
* condition, but we treat it as RX for newer chips.
- * We don't know exactly which versions need a reset -
+ * We don't know exactly which versions need a reset
* this guess is copied from the HAL.
*/
ah->stats.rxorn_intr++;
+
if (ah->ah_mac_srev < AR5K_SREV_AR5212) {
ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
"rx overrun, resetting\n");
ieee80211_queue_work(ah->hw, &ah->reset_work);
} else
ath5k_schedule_rx(ah);
+
} else {
+
+ /* Software Beacon Alert -> Schedule beacon tasklet */
if (status & AR5K_INT_SWBA)
tasklet_hi_schedule(&ah->beacontq);
- if (status & AR5K_INT_RXEOL) {
- /*
- * NB: the hardware should re-read the link when
- * RXE bit is written, but it doesn't work at
- * least on older hardware revs.
- */
+ /*
+ * No more RX descriptors -> Just count
+ *
+ * NB: the hardware should re-read the link when
+ * RXE bit is written, but it doesn't work at
+ * least on older hardware revs.
+ */
+ if (status & AR5K_INT_RXEOL)
ah->stats.rxeol_intr++;
- }
- if (status & AR5K_INT_TXURN) {
- /* bump tx trigger level */
+
+
+ /* TX Underrun -> Bump tx trigger level */
+ if (status & AR5K_INT_TXURN)
ath5k_hw_update_tx_triglevel(ah, true);
- }
+
+ /* RX -> Schedule rx tasklet */
if (status & (AR5K_INT_RXOK | AR5K_INT_RXERR))
ath5k_schedule_rx(ah);
- if (status & (AR5K_INT_TXOK | AR5K_INT_TXDESC
- | AR5K_INT_TXERR | AR5K_INT_TXEOL))
+
+ /* TX -> Schedule tx tasklet */
+ if (status & (AR5K_INT_TXOK
+ | AR5K_INT_TXDESC
+ | AR5K_INT_TXERR
+ | AR5K_INT_TXEOL))
ath5k_schedule_tx(ah);
- if (status & AR5K_INT_BMISS) {
- /* TODO */
- }
+
+ /* Missed beacon -> TODO
+ if (status & AR5K_INT_BMISS)
+ */
+
+ /* MIB event -> Update counters and notify ANI */
if (status & AR5K_INT_MIB) {
ah->stats.mib_intr++;
ath5k_hw_update_mib_counters(ah);
ath5k_ani_mib_intr(ah);
}
+
+ /* GPIO -> Notify RFKill layer */
if (status & AR5K_INT_GPIO)
tasklet_schedule(&ah->rf_kill.toggleq);
@@ -2222,12 +2263,19 @@ ath5k_intr(int irq, void *dev_id)
} while (ath5k_hw_is_intr_pending(ah) && --counter > 0);
+ /*
+ * Until we handle rx/tx interrupts mask them on IMR
+ *
+ * NOTE: ah->(rx/tx)_pending are set when scheduling the tasklets
+ * and unset after we 've handled the interrupts.
+ */
if (ah->rx_pending || ah->tx_pending)
ath5k_set_current_imask(ah);
if (unlikely(!counter))
ATH5K_WARN(ah, "too many interrupts, giving up for now\n");
+ /* Fire up calibration poll */
ath5k_intr_calibration_poll(ah);
return IRQ_HANDLED;
@@ -2544,9 +2592,15 @@ int ath5k_start(struct ieee80211_hw *hw)
* and then setup of the interrupt mask.
*/
ah->curchan = ah->hw->conf.channel;
- ah->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL |
- AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
- AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB;
+ ah->imask = AR5K_INT_RXOK
+ | AR5K_INT_RXERR
+ | AR5K_INT_RXEOL
+ | AR5K_INT_RXORN
+ | AR5K_INT_TXDESC
+ | AR5K_INT_TXEOL
+ | AR5K_INT_FATAL
+ | AR5K_INT_GLOBAL
+ | AR5K_INT_MIB;
ret = ath5k_reset(ah, NULL, false);
if (ret)
diff --git a/drivers/net/wireless/ath/ath5k/dma.c b/drivers/net/wireless/ath/ath5k/dma.c
index b5db6e78f88..97864d88d18 100644
--- a/drivers/net/wireless/ath/ath5k/dma.c
+++ b/drivers/net/wireless/ath/ath5k/dma.c
@@ -701,21 +701,25 @@ int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
if (unlikely(pisr & (AR5K_ISR_BNR)))
*interrupt_mask |= AR5K_INT_BNR;
+ /* Doppler chirp received */
if (unlikely(pisr & (AR5K_ISR_RXDOPPLER)))
*interrupt_mask |= AR5K_INT_RX_DOPPLER;
+ /* A queue got CBR overrun */
if (unlikely(pisr & (AR5K_ISR_QCBRORN))) {
*interrupt_mask |= AR5K_INT_QCBRORN;
ah->ah_txq_isr_qcborn |= AR5K_REG_MS(sisr3,
AR5K_SISR3_QCBRORN);
}
+ /* A queue got CBR underrun */
if (unlikely(pisr & (AR5K_ISR_QCBRURN))) {
*interrupt_mask |= AR5K_INT_QCBRURN;
ah->ah_txq_isr_qcburn |= AR5K_REG_MS(sisr3,
AR5K_SISR3_QCBRURN);
}
+ /* A queue got triggered */
if (unlikely(pisr & (AR5K_ISR_QTRIG))) {
*interrupt_mask |= AR5K_INT_QTRIG;
ah->ah_txq_isr_qtrig |= AR5K_REG_MS(sisr4,
@@ -772,16 +776,14 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask)
u32 simr2 = ath5k_hw_reg_read(ah, AR5K_SIMR2)
& AR5K_SIMR2_QCU_TXURN;
+ /* Fatal interrupt abstraction for 5211+ */
if (new_mask & AR5K_INT_FATAL) {
int_mask |= AR5K_IMR_HIUERR;
simr2 |= (AR5K_SIMR2_MCABT | AR5K_SIMR2_SSERR
| AR5K_SIMR2_DPERR);
}
- /*Beacon Not Ready*/
- if (new_mask & AR5K_INT_BNR)
- int_mask |= AR5K_INT_BNR;
-
+ /* Misc beacon related interrupts */
if (new_mask & AR5K_INT_TIM)
int_mask |= AR5K_IMR_TIM;
@@ -796,6 +798,11 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask)
if (new_mask & AR5K_INT_CAB_TIMEOUT)
simr2 |= AR5K_SISR2_CAB_TIMEOUT;
+ /*Beacon Not Ready*/
+ if (new_mask & AR5K_INT_BNR)
+ int_mask |= AR5K_INT_BNR;
+
+ /* RX doppler chirp */
if (new_mask & AR5K_INT_RX_DOPPLER)
int_mask |= AR5K_IMR_RXDOPPLER;
@@ -805,10 +812,12 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask)
ath5k_hw_reg_write(ah, simr2, AR5K_SIMR2);
} else {
+ /* Fatal interrupt abstraction for 5210 */
if (new_mask & AR5K_INT_FATAL)
int_mask |= (AR5K_IMR_SSERR | AR5K_IMR_MCABT
| AR5K_IMR_HIUERR | AR5K_IMR_DPERR);
+ /* Only common interrupts left for 5210 (no SIMRs) */
ath5k_hw_reg_write(ah, int_mask, AR5K_IMR);
}