Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1075 commits)
  myri10ge: update driver version number to 1.4.3-1.369
  r8169: add shutdown handler
  r8169: preliminary 8168d support
  r8169: support additional 8168cp chipset
  r8169: change default behavior for mildly identified 8168c chipsets
  r8169: add a new 8168cp flavor
  r8169: add a new 8168c flavor (bis)
  r8169: add a new 8168c flavor
  r8169: sync existing 8168 device hardware start sequences with vendor driver
  r8169: 8168b Tx performance tweak
  r8169: make room for more specific 8168 hardware start procedure
  r8169: shuffle some registers handling around (8168 operation only)
  r8169: new phy init parameters for the 8168b
  r8169: update phy init parameters
  r8169: wake up the PHY of the 8168
  af_key: fix SADB_X_SPDDELETE response
  ath9k: Fix return code when ath9k_hw_setpower() fails on reset
  ath9k: remove nasty FAIL macro from ath9k_hw_reset()
  gre: minor cleanups in netlink interface
  gre: fix copy and paste error
  ...

1 files changed, 381 insertions, 0 deletions

diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
new file mode 100644
index 00000000000..af37abccccb
--- /dev/null
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -0,0 +1,381 @@
+/*
+
+  Broadcom B43 wireless driver
+  Common PHY routines
+
+  Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
+  Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it>
+  Copyright (c) 2005-2008 Michael Buesch <mb@bu3sch.de>
+  Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org>
+  Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch>
+
+  This program is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program; see the file COPYING.  If not, write to
+  the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+  Boston, MA 02110-1301, USA.
+
+*/
+
+#include "phy_common.h"
+#include "phy_g.h"
+#include "phy_a.h"
+#include "phy_n.h"
+#include "phy_lp.h"
+#include "b43.h"
+#include "main.h"
+
+
+int b43_phy_allocate(struct b43_wldev *dev)
+{
+	struct b43_phy *phy = &(dev->phy);
+	int err;
+
+	phy->ops = NULL;
+
+	switch (phy->type) {
+	case B43_PHYTYPE_A:
+		phy->ops = &b43_phyops_a;
+		break;
+	case B43_PHYTYPE_G:
+		phy->ops = &b43_phyops_g;
+		break;
+	case B43_PHYTYPE_N:
+#ifdef CONFIG_B43_NPHY
+		phy->ops = &b43_phyops_n;
+#endif
+		break;
+	case B43_PHYTYPE_LP:
+#ifdef CONFIG_B43_PHY_LP
+		phy->ops = &b43_phyops_lp;
+#endif
+		break;
+	}
+	if (B43_WARN_ON(!phy->ops))
+		return -ENODEV;
+
+	err = phy->ops->allocate(dev);
+	if (err)
+		phy->ops = NULL;
+
+	return err;
+}
+
+void b43_phy_free(struct b43_wldev *dev)
+{
+	dev->phy.ops->free(dev);
+	dev->phy.ops = NULL;
+}
+
+int b43_phy_init(struct b43_wldev *dev)
+{
+	struct b43_phy *phy = &dev->phy;
+	const struct b43_phy_operations *ops = phy->ops;
+	int err;
+
+	phy->channel = ops->get_default_chan(dev);
+
+	ops->software_rfkill(dev, RFKILL_STATE_UNBLOCKED);
+	err = ops->init(dev);
+	if (err) {
+		b43err(dev->wl, "PHY init failed\n");
+		goto err_block_rf;
+	}
+	/* Make sure to switch hardware and firmware (SHM) to
+	 * the default channel. */
+	err = b43_switch_channel(dev, ops->get_default_chan(dev));
+	if (err) {
+		b43err(dev->wl, "PHY init: Channel switch to default failed\n");
+		goto err_phy_exit;
+	}
+
+	return 0;
+
+err_phy_exit:
+	if (ops->exit)
+		ops->exit(dev);
+err_block_rf:
+	ops->software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED);
+
+	return err;
+}
+
+void b43_phy_exit(struct b43_wldev *dev)
+{
+	const struct b43_phy_operations *ops = dev->phy.ops;
+
+	ops->software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED);
+	if (ops->exit)
+		ops->exit(dev);
+}
+
+bool b43_has_hardware_pctl(struct b43_wldev *dev)
+{
+	if (!dev->phy.hardware_power_control)
+		return 0;
+	if (!dev->phy.ops->supports_hwpctl)
+		return 0;
+	return dev->phy.ops->supports_hwpctl(dev);
+}
+
+void b43_radio_lock(struct b43_wldev *dev)
+{
+	u32 macctl;
+
+	macctl = b43_read32(dev, B43_MMIO_MACCTL);
+	B43_WARN_ON(macctl & B43_MACCTL_RADIOLOCK);
+	macctl |= B43_MACCTL_RADIOLOCK;
+	b43_write32(dev, B43_MMIO_MACCTL, macctl);
+	/* Commit the write and wait for the device
+	 * to exit any radio register access. */
+	b43_read32(dev, B43_MMIO_MACCTL);
+	udelay(10);
+}
+
+void b43_radio_unlock(struct b43_wldev *dev)
+{
+	u32 macctl;
+
+	/* Commit any write */
+	b43_read16(dev, B43_MMIO_PHY_VER);
+	/* unlock */
+	macctl = b43_read32(dev, B43_MMIO_MACCTL);
+	B43_WARN_ON(!(macctl & B43_MACCTL_RADIOLOCK));
+	macctl &= ~B43_MACCTL_RADIOLOCK;
+	b43_write32(dev, B43_MMIO_MACCTL, macctl);
+}
+
+void b43_phy_lock(struct b43_wldev *dev)
+{
+#if B43_DEBUG
+	B43_WARN_ON(dev->phy.phy_locked);
+	dev->phy.phy_locked = 1;
+#endif
+	B43_WARN_ON(dev->dev->id.revision < 3);
+
+	if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP))
+		b43_power_saving_ctl_bits(dev, B43_PS_AWAKE);
+}
+
+void b43_phy_unlock(struct b43_wldev *dev)
+{
+#if B43_DEBUG
+	B43_WARN_ON(!dev->phy.phy_locked);
+	dev->phy.phy_locked = 0;
+#endif
+	B43_WARN_ON(dev->dev->id.revision < 3);
+
+	if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP))
+		b43_power_saving_ctl_bits(dev, 0);
+}
+
+u16 b43_radio_read(struct b43_wldev *dev, u16 reg)
+{
+	return dev->phy.ops->radio_read(dev, reg);
+}
+
+void b43_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
+{
+	dev->phy.ops->radio_write(dev, reg, value);
+}
+
+void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask)
+{
+	b43_radio_write16(dev, offset,
+			  b43_radio_read16(dev, offset) & mask);
+}
+
+void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set)
+{
+	b43_radio_write16(dev, offset,
+			  b43_radio_read16(dev, offset) | set);
+}
+
+void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set)
+{
+	b43_radio_write16(dev, offset,
+			  (b43_radio_read16(dev, offset) & mask) | set);
+}
+
+u16 b43_phy_read(struct b43_wldev *dev, u16 reg)
+{
+	return dev->phy.ops->phy_read(dev, reg);
+}
+
+void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value)
+{
+	dev->phy.ops->phy_write(dev, reg, value);
+}
+
+void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask)
+{
+	b43_phy_write(dev, offset,
+		      b43_phy_read(dev, offset) & mask);
+}
+
+void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set)
+{
+	b43_phy_write(dev, offset,
+		      b43_phy_read(dev, offset) | set);
+}
+
+void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set)
+{
+	b43_phy_write(dev, offset,
+		      (b43_phy_read(dev, offset) & mask) | set);
+}
+
+int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel)
+{
+	struct b43_phy *phy = &(dev->phy);
+	u16 channelcookie, savedcookie;
+	int err;
+
+	if (new_channel == B43_DEFAULT_CHANNEL)
+		new_channel = phy->ops->get_default_chan(dev);
+
+	/* First we set the channel radio code to prevent the
+	 * firmware from sending ghost packets.
+	 */
+	channelcookie = new_channel;
+	if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ)
+		channelcookie |= 0x100;
+	//FIXME set 40Mhz flag if required
+	savedcookie = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN);
+	b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN, channelcookie);
+
+	/* Now try to switch the PHY hardware channel. */
+	err = phy->ops->switch_channel(dev, new_channel);
+	if (err)
+		goto err_restore_cookie;
+
+	dev->phy.channel = new_channel;
+	/* Wait for the radio to tune to the channel and stabilize. */
+	msleep(8);
+
+	return 0;
+
+err_restore_cookie:
+	b43_shm_write16(dev, B43_SHM_SHARED,
+			B43_SHM_SH_CHAN, savedcookie);
+
+	return err;
+}
+
+void b43_software_rfkill(struct b43_wldev *dev, enum rfkill_state state)
+{
+	struct b43_phy *phy = &dev->phy;
+
+	if (state == RFKILL_STATE_HARD_BLOCKED) {
+		/* We cannot hardware-block the device */
+		state = RFKILL_STATE_SOFT_BLOCKED;
+	}
+
+	phy->ops->software_rfkill(dev, state);
+	phy->radio_on = (state == RFKILL_STATE_UNBLOCKED);
+}
+
+/**
+ * b43_phy_txpower_adjust_work - TX power workqueue.
+ *
+ * Workqueue for updating the TX power parameters in hardware.
+ */
+void b43_phy_txpower_adjust_work(struct work_struct *work)
+{
+	struct b43_wl *wl = container_of(work, struct b43_wl,
+					 txpower_adjust_work);
+	struct b43_wldev *dev;
+
+	mutex_lock(&wl->mutex);
+	dev = wl->current_dev;
+
+	if (likely(dev && (b43_status(dev) >= B43_STAT_STARTED)))
+		dev->phy.ops->adjust_txpower(dev);
+
+	mutex_unlock(&wl->mutex);
+}
+
+/* Called with wl->irq_lock locked */
+void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags)
+{
+	struct b43_phy *phy = &dev->phy;
+	unsigned long now = jiffies;
+	enum b43_txpwr_result result;
+
+	if (!(flags & B43_TXPWR_IGNORE_TIME)) {
+		/* Check if it's time for a TXpower check. */
+		if (time_before(now, phy->next_txpwr_check_time))
+			return; /* Not yet */
+	}
+	/* The next check will be needed in two seconds, or later. */
+	phy->next_txpwr_check_time = round_jiffies(now + (HZ * 2));
+
+	if ((dev->dev->bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) &&
+	    (dev->dev->bus->boardinfo.type == SSB_BOARD_BU4306))
+		return; /* No software txpower adjustment needed */
+
+	result = phy->ops->recalc_txpower(dev, !!(flags & B43_TXPWR_IGNORE_TSSI));
+	if (result == B43_TXPWR_RES_DONE)
+		return; /* We are done. */
+	B43_WARN_ON(result != B43_TXPWR_RES_NEED_ADJUST);
+	B43_WARN_ON(phy->ops->adjust_txpower == NULL);
+
+	/* We must adjust the transmission power in hardware.
+	 * Schedule b43_phy_txpower_adjust_work(). */
+	queue_work(dev->wl->hw->workqueue, &dev->wl->txpower_adjust_work);
+}
+
+int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset)
+{
+	const bool is_ofdm = (shm_offset != B43_SHM_SH_TSSI_CCK);
+	unsigned int a, b, c, d;
+	unsigned int average;
+	u32 tmp;
+
+	tmp = b43_shm_read32(dev, B43_SHM_SHARED, shm_offset);
+	a = tmp & 0xFF;
+	b = (tmp >> 8) & 0xFF;
+	c = (tmp >> 16) & 0xFF;
+	d = (tmp >> 24) & 0xFF;
+	if (a == 0 || a == B43_TSSI_MAX ||
+	    b == 0 || b == B43_TSSI_MAX ||
+	    c == 0 || c == B43_TSSI_MAX ||
+	    d == 0 || d == B43_TSSI_MAX)
+		return -ENOENT;
+	/* The values are OK. Clear them. */
+	tmp = B43_TSSI_MAX | (B43_TSSI_MAX << 8) |
+	      (B43_TSSI_MAX << 16) | (B43_TSSI_MAX << 24);
+	b43_shm_write32(dev, B43_SHM_SHARED, shm_offset, tmp);
+
+	if (is_ofdm) {
+		a = (a + 32) & 0x3F;
+		b = (b + 32) & 0x3F;
+		c = (c + 32) & 0x3F;
+		d = (d + 32) & 0x3F;
+	}
+
+	/* Get the average of the values with 0.5 added to each value. */
+	average = (a + b + c + d + 2) / 4;
+	if (is_ofdm) {
+		/* Adjust for CCK-boost */
+		if (b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO)
+		    & B43_HF_CCKBOOST)
+			average = (average >= 13) ? (average - 13) : 0;
+	}
+
+	return average;
+}
+
+void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on)
+{
+	b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
+}