Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem

8 files changed, 157 insertions, 48 deletions

diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 08a28270bbb..c818b0bc88e 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -433,6 +433,12 @@ enum {
 #define  B43_BCMA_IOCTL_PHY_BW_40MHZ	0x00000080	/* 40 MHz bandwidth, 160 MHz PHY */
 #define B43_BCMA_IOCTL_GMODE		0x00002000	/* G Mode Enable */
 
+/* BCMA 802.11 core specific IO status (BCMA_IOST) flags */
+#define B43_BCMA_IOST_2G_PHY		0x00000001	/* 2.4G capable phy */
+#define B43_BCMA_IOST_5G_PHY		0x00000002	/* 5G capable phy */
+#define B43_BCMA_IOST_FASTCLKA		0x00000004	/* Fast Clock Available */
+#define B43_BCMA_IOST_DUALB_PHY		0x00000008	/* Dualband phy */
+
 /* 802.11 core specific TM State Low (SSB_TMSLOW) flags */
 #define B43_TMSLOW_GMODE		0x20000000	/* G Mode Enable */
 #define B43_TMSLOW_PHY_BANDWIDTH	0x00C00000	/* PHY band width and clock speed mask (N-PHY only) */
@@ -588,6 +594,7 @@ struct b43_dma {
 	struct b43_dmaring *rx_ring;
 
 	u32 translation; /* Routing bits */
+	bool parity; /* Check for parity */
 };
 
 struct b43_pio_txqueue;
diff --git a/drivers/net/wireless/b43/bus.c b/drivers/net/wireless/b43/bus.c
index a5e61a9fb53..64c3f65ff8c 100644
--- a/drivers/net/wireless/b43/bus.c
+++ b/drivers/net/wireless/b43/bus.c
@@ -126,55 +126,52 @@ struct b43_bus_dev *b43_bus_dev_bcma_init(struct bcma_device *core)
 
 /* SSB */
 #ifdef CONFIG_B43_SSB
-static inline int b43_bus_ssb_bus_may_powerdown(struct b43_bus_dev *dev)
+static int b43_bus_ssb_bus_may_powerdown(struct b43_bus_dev *dev)
 {
 	return ssb_bus_may_powerdown(dev->sdev->bus);
 }
-static inline int b43_bus_ssb_bus_powerup(struct b43_bus_dev *dev,
+static int b43_bus_ssb_bus_powerup(struct b43_bus_dev *dev,
 					  bool dynamic_pctl)
 {
 	return ssb_bus_powerup(dev->sdev->bus, dynamic_pctl);
 }
-static inline int b43_bus_ssb_device_is_enabled(struct b43_bus_dev *dev)
+static int b43_bus_ssb_device_is_enabled(struct b43_bus_dev *dev)
 {
 	return ssb_device_is_enabled(dev->sdev);
 }
-static inline void b43_bus_ssb_device_enable(struct b43_bus_dev *dev,
+static void b43_bus_ssb_device_enable(struct b43_bus_dev *dev,
 					     u32 core_specific_flags)
 {
 	ssb_device_enable(dev->sdev, core_specific_flags);
 }
-static inline void b43_bus_ssb_device_disable(struct b43_bus_dev *dev,
+static void b43_bus_ssb_device_disable(struct b43_bus_dev *dev,
 					      u32 core_specific_flags)
 {
 	ssb_device_disable(dev->sdev, core_specific_flags);
 }
 
-static inline u16 b43_bus_ssb_read16(struct b43_bus_dev *dev, u16 offset)
+static u16 b43_bus_ssb_read16(struct b43_bus_dev *dev, u16 offset)
 {
 	return ssb_read16(dev->sdev, offset);
 }
-static inline u32 b43_bus_ssb_read32(struct b43_bus_dev *dev, u16 offset)
+static u32 b43_bus_ssb_read32(struct b43_bus_dev *dev, u16 offset)
 {
 	return ssb_read32(dev->sdev, offset);
 }
-static inline
-void b43_bus_ssb_write16(struct b43_bus_dev *dev, u16 offset, u16 value)
+static void b43_bus_ssb_write16(struct b43_bus_dev *dev, u16 offset, u16 value)
 {
 	ssb_write16(dev->sdev, offset, value);
 }
-static inline
-void b43_bus_ssb_write32(struct b43_bus_dev *dev, u16 offset, u32 value)
+static void b43_bus_ssb_write32(struct b43_bus_dev *dev, u16 offset, u32 value)
 {
 	ssb_write32(dev->sdev, offset, value);
 }
-static inline
-void b43_bus_ssb_block_read(struct b43_bus_dev *dev, void *buffer,
-			    size_t count, u16 offset, u8 reg_width)
+static void b43_bus_ssb_block_read(struct b43_bus_dev *dev, void *buffer,
+				   size_t count, u16 offset, u8 reg_width)
 {
 	ssb_block_read(dev->sdev, buffer, count, offset, reg_width);
 }
-static inline
+static
 void b43_bus_ssb_block_write(struct b43_bus_dev *dev, const void *buffer,
 			     size_t count, u16 offset, u8 reg_width)
 {
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index ce572aebeff..0953ce1ac1b 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -174,7 +174,7 @@ static void op64_fill_descriptor(struct b43_dmaring *ring,
 	addrhi = (((u64) dmaaddr >> 32) & ~SSB_DMA_TRANSLATION_MASK);
 	addrext = (((u64) dmaaddr >> 32) & SSB_DMA_TRANSLATION_MASK)
 	    >> SSB_DMA_TRANSLATION_SHIFT;
-	addrhi |= (ring->dev->dma.translation << 1);
+	addrhi |= ring->dev->dma.translation;
 	if (slot == ring->nr_slots - 1)
 		ctl0 |= B43_DMA64_DCTL0_DTABLEEND;
 	if (start)
@@ -659,6 +659,7 @@ static int dmacontroller_setup(struct b43_dmaring *ring)
 	u32 value;
 	u32 addrext;
 	u32 trans = ring->dev->dma.translation;
+	bool parity = ring->dev->dma.parity;
 
 	if (ring->tx) {
 		if (ring->type == B43_DMA_64BIT) {
@@ -669,13 +670,15 @@ static int dmacontroller_setup(struct b43_dmaring *ring)
 			value = B43_DMA64_TXENABLE;
 			value |= (addrext << B43_DMA64_TXADDREXT_SHIFT)
 			    & B43_DMA64_TXADDREXT_MASK;
+			if (!parity)
+				value |= B43_DMA64_TXPARITYDISABLE;
 			b43_dma_write(ring, B43_DMA64_TXCTL, value);
 			b43_dma_write(ring, B43_DMA64_TXRINGLO,
 				      (ringbase & 0xFFFFFFFF));
 			b43_dma_write(ring, B43_DMA64_TXRINGHI,
 				      ((ringbase >> 32) &
 				       ~SSB_DMA_TRANSLATION_MASK)
-				      | (trans << 1));
+				      | trans);
 		} else {
 			u32 ringbase = (u32) (ring->dmabase);
 
@@ -684,6 +687,8 @@ static int dmacontroller_setup(struct b43_dmaring *ring)
 			value = B43_DMA32_TXENABLE;
 			value |= (addrext << B43_DMA32_TXADDREXT_SHIFT)
 			    & B43_DMA32_TXADDREXT_MASK;
+			if (!parity)
+				value |= B43_DMA32_TXPARITYDISABLE;
 			b43_dma_write(ring, B43_DMA32_TXCTL, value);
 			b43_dma_write(ring, B43_DMA32_TXRING,
 				      (ringbase & ~SSB_DMA_TRANSLATION_MASK)
@@ -702,13 +707,15 @@ static int dmacontroller_setup(struct b43_dmaring *ring)
 			value |= B43_DMA64_RXENABLE;
 			value |= (addrext << B43_DMA64_RXADDREXT_SHIFT)
 			    & B43_DMA64_RXADDREXT_MASK;
+			if (!parity)
+				value |= B43_DMA64_RXPARITYDISABLE;
 			b43_dma_write(ring, B43_DMA64_RXCTL, value);
 			b43_dma_write(ring, B43_DMA64_RXRINGLO,
 				      (ringbase & 0xFFFFFFFF));
 			b43_dma_write(ring, B43_DMA64_RXRINGHI,
 				      ((ringbase >> 32) &
 				       ~SSB_DMA_TRANSLATION_MASK)
-				      | (trans << 1));
+				      | trans);
 			b43_dma_write(ring, B43_DMA64_RXINDEX, ring->nr_slots *
 				      sizeof(struct b43_dmadesc64));
 		} else {
@@ -720,6 +727,8 @@ static int dmacontroller_setup(struct b43_dmaring *ring)
 			value |= B43_DMA32_RXENABLE;
 			value |= (addrext << B43_DMA32_RXADDREXT_SHIFT)
 			    & B43_DMA32_RXADDREXT_MASK;
+			if (!parity)
+				value |= B43_DMA32_RXPARITYDISABLE;
 			b43_dma_write(ring, B43_DMA32_RXCTL, value);
 			b43_dma_write(ring, B43_DMA32_RXRING,
 				      (ringbase & ~SSB_DMA_TRANSLATION_MASK)
@@ -1057,6 +1066,11 @@ int b43_dma_init(struct b43_wldev *dev)
 		return err;
 
 	switch (dev->dev->bus_type) {
+#ifdef CONFIG_B43_BCMA
+	case B43_BUS_BCMA:
+		dma->translation = bcma_core_dma_translation(dev->dev->bdev);
+		break;
+#endif
 #ifdef CONFIG_B43_SSB
 	case B43_BUS_SSB:
 		dma->translation = ssb_dma_translation(dev->dev->sdev);
@@ -1064,6 +1078,13 @@ int b43_dma_init(struct b43_wldev *dev)
 #endif
 	}
 
+	dma->parity = true;
+#ifdef CONFIG_B43_BCMA
+	/* TODO: find out which SSB devices need disabling parity */
+	if (dev->dev->bus_type == B43_BUS_BCMA)
+		dma->parity = false;
+#endif
+
 	err = -ENOMEM;
 	/* setup TX DMA channels. */
 	dma->tx_ring_AC_BK = b43_setup_dmaring(dev, 0, 1, type);
diff --git a/drivers/net/wireless/b43/dma.h b/drivers/net/wireless/b43/dma.h
index e8a80a1251b..cdf87094efe 100644
--- a/drivers/net/wireless/b43/dma.h
+++ b/drivers/net/wireless/b43/dma.h
@@ -20,6 +20,7 @@
 #define		B43_DMA32_TXSUSPEND			0x00000002
 #define		B43_DMA32_TXLOOPBACK		0x00000004
 #define		B43_DMA32_TXFLUSH			0x00000010
+#define		B43_DMA32_TXPARITYDISABLE		0x00000800
 #define		B43_DMA32_TXADDREXT_MASK		0x00030000
 #define		B43_DMA32_TXADDREXT_SHIFT		16
 #define B43_DMA32_TXRING				0x04
@@ -44,6 +45,7 @@
 #define		B43_DMA32_RXFROFF_MASK		0x000000FE
 #define		B43_DMA32_RXFROFF_SHIFT		1
 #define		B43_DMA32_RXDIRECTFIFO		0x00000100
+#define		B43_DMA32_RXPARITYDISABLE		0x00000800
 #define		B43_DMA32_RXADDREXT_MASK		0x00030000
 #define		B43_DMA32_RXADDREXT_SHIFT		16
 #define B43_DMA32_RXRING				0x14
@@ -84,6 +86,7 @@ struct b43_dmadesc32 {
 #define		B43_DMA64_TXSUSPEND			0x00000002
 #define		B43_DMA64_TXLOOPBACK		0x00000004
 #define		B43_DMA64_TXFLUSH			0x00000010
+#define		B43_DMA64_TXPARITYDISABLE		0x00000800
 #define		B43_DMA64_TXADDREXT_MASK		0x00030000
 #define		B43_DMA64_TXADDREXT_SHIFT		16
 #define B43_DMA64_TXINDEX				0x04
@@ -111,6 +114,7 @@ struct b43_dmadesc32 {
 #define		B43_DMA64_RXFROFF_MASK		0x000000FE
 #define		B43_DMA64_RXFROFF_SHIFT		1
 #define		B43_DMA64_RXDIRECTFIFO		0x00000100
+#define		B43_DMA64_RXPARITYDISABLE		0x00000800
 #define		B43_DMA64_RXADDREXT_MASK		0x00030000
 #define		B43_DMA64_RXADDREXT_SHIFT		16
 #define B43_DMA64_RXINDEX				0x24
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 092dd931886..73fbf0358f9 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1156,17 +1156,37 @@ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags)
 }
 
 #ifdef CONFIG_B43_BCMA
-static void b43_bcma_wireless_core_reset(struct b43_wldev *dev, bool gmode)
+static void b43_bcma_phy_reset(struct b43_wldev *dev)
 {
-	u32 flags = 0;
+	u32 flags;
 
-	if (gmode)
-		flags = B43_BCMA_IOCTL_GMODE;
-	flags |= B43_BCMA_IOCTL_PHY_CLKEN;
+	/* Put PHY into reset */
+	flags = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
+	flags |= B43_BCMA_IOCTL_PHY_RESET;
 	flags |= B43_BCMA_IOCTL_PHY_BW_20MHZ; /* Make 20 MHz def */
-	b43_device_enable(dev, flags);
+	bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, flags);
+	udelay(2);
+
+	/* Take PHY out of reset */
+	flags = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
+	flags &= ~B43_BCMA_IOCTL_PHY_RESET;
+	flags |= BCMA_IOCTL_FGC;
+	bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, flags);
+	udelay(1);
 
-	/* TODO: reset PHY */
+	/* Do not force clock anymore */
+	flags = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
+	flags &= ~BCMA_IOCTL_FGC;
+	bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, flags);
+	udelay(1);
+}
+
+static void b43_bcma_wireless_core_reset(struct b43_wldev *dev, bool gmode)
+{
+	b43_device_enable(dev, B43_BCMA_IOCTL_PHY_CLKEN);
+	bcma_core_set_clockmode(dev->dev->bdev, BCMA_CLKMODE_FAST);
+	b43_bcma_phy_reset(dev);
+	bcma_core_pll_ctl(dev->dev->bdev, 0x300, 0x3000000, true);
 }
 #endif
 
@@ -2814,12 +2834,12 @@ void b43_mac_phy_clock_set(struct b43_wldev *dev, bool on)
 	switch (dev->dev->bus_type) {
 #ifdef CONFIG_B43_BCMA
 	case B43_BUS_BCMA:
-		tmp = bcma_read32(dev->dev->bdev, BCMA_IOCTL);
+		tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
 		if (on)
 			tmp |= B43_BCMA_IOCTL_MACPHYCLKEN;
 		else
 			tmp &= ~B43_BCMA_IOCTL_MACPHYCLKEN;
-		bcma_write32(dev->dev->bdev, BCMA_IOCTL, tmp);
+		bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
 		break;
 #endif
 #ifdef CONFIG_B43_SSB
@@ -4948,6 +4968,7 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
 	struct b43_wl *wl = dev->wl;
 	struct pci_dev *pdev = NULL;
 	int err;
+	u32 tmp;
 	bool have_2ghz_phy = 0, have_5ghz_phy = 0;
 
 	/* Do NOT do any device initialization here.
@@ -4973,17 +4994,17 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
 	switch (dev->dev->bus_type) {
 #ifdef CONFIG_B43_BCMA
 	case B43_BUS_BCMA:
-		/* FIXME */
-		have_2ghz_phy = 1;
-		have_5ghz_phy = 0;
+		tmp = bcma_aread32(dev->dev->bdev, BCMA_IOST);
+		have_2ghz_phy = !!(tmp & B43_BCMA_IOST_2G_PHY);
+		have_5ghz_phy = !!(tmp & B43_BCMA_IOST_5G_PHY);
 		break;
 #endif
 #ifdef CONFIG_B43_SSB
 	case B43_BUS_SSB:
 		if (dev->dev->core_rev >= 5) {
-			u32 tmshigh = ssb_read32(dev->dev->sdev, SSB_TMSHIGH);
-			have_2ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_2GHZ_PHY);
-			have_5ghz_phy = !!(tmshigh & B43_TMSHIGH_HAVE_5GHZ_PHY);
+			tmp = ssb_read32(dev->dev->sdev, SSB_TMSHIGH);
+			have_2ghz_phy = !!(tmp & B43_TMSHIGH_HAVE_2GHZ_PHY);
+			have_5ghz_phy = !!(tmp & B43_TMSHIGH_HAVE_5GHZ_PHY);
 		} else
 			B43_WARN_ON(1);
 		break;
@@ -5164,6 +5185,7 @@ static struct b43_wl *b43_wireless_init(struct b43_bus_dev *dev)
 	struct ssb_sprom *sprom = dev->bus_sprom;
 	struct ieee80211_hw *hw;
 	struct b43_wl *wl;
+	char chip_name[6];
 
 	hw = ieee80211_alloc_hw(sizeof(*wl), &b43_hw_ops);
 	if (!hw) {
@@ -5202,8 +5224,10 @@ static struct b43_wl *b43_wireless_init(struct b43_bus_dev *dev)
 	INIT_WORK(&wl->tx_work, b43_tx_work);
 	skb_queue_head_init(&wl->tx_queue);
 
-	b43info(wl, "Broadcom %04X WLAN found (core revision %u)\n",
-		dev->chip_id, dev->core_rev);
+	snprintf(chip_name, ARRAY_SIZE(chip_name),
+		 (dev->chip_id > 0x9999) ? "%d" : "%04X", dev->chip_id);
+	b43info(wl, "Broadcom %s WLAN found (core revision %u)\n", chip_name,
+		dev->core_rev);
 	return wl;
 }
 
@@ -5211,19 +5235,59 @@ static struct b43_wl *b43_wireless_init(struct b43_bus_dev *dev)
 static int b43_bcma_probe(struct bcma_device *core)
 {
 	struct b43_bus_dev *dev;
+	struct b43_wl *wl;
+	int err;
 
 	dev = b43_bus_dev_bcma_init(core);
 	if (!dev)
 		return -ENODEV;
 
-	b43err(NULL, "BCMA is not supported yet!");
-	kfree(dev);
-	return -EOPNOTSUPP;
+	wl = b43_wireless_init(dev);
+	if (IS_ERR(wl)) {
+		err = PTR_ERR(wl);
+		goto bcma_out;
+	}
+
+	err = b43_one_core_attach(dev, wl);
+	if (err)
+		goto bcma_err_wireless_exit;
+
+	err = ieee80211_register_hw(wl->hw);
+	if (err)
+		goto bcma_err_one_core_detach;
+	b43_leds_register(wl->current_dev);
+
+bcma_out:
+	return err;
+
+bcma_err_one_core_detach:
+	b43_one_core_detach(dev);
+bcma_err_wireless_exit:
+	ieee80211_free_hw(wl->hw);
+	return err;
 }
 
 static void b43_bcma_remove(struct bcma_device *core)
 {
-	/* TODO */
+	struct b43_wldev *wldev = bcma_get_drvdata(core);
+	struct b43_wl *wl = wldev->wl;
+
+	/* We must cancel any work here before unregistering from ieee80211,
+	 * as the ieee80211 unreg will destroy the workqueue. */
+	cancel_work_sync(&wldev->restart_work);
+
+	/* Restore the queues count before unregistering, because firmware detect
+	 * might have modified it. Restoring is important, so the networking
+	 * stack can properly free resources. */
+	wl->hw->queues = wl->mac80211_initially_registered_queues;
+	b43_leds_stop(wldev);
+	ieee80211_unregister_hw(wl->hw);
+
+	b43_one_core_detach(wldev->dev);
+
+	b43_leds_unregister(wl);
+
+	ieee80211_free_hw(wl->hw);
 }
 
 static struct bcma_driver b43_bcma_driver = {
diff --git a/drivers/net/wireless/b43/phy_ht.c b/drivers/net/wireless/b43/phy_ht.c
index 29821036bad..7c40919651a 100644
--- a/drivers/net/wireless/b43/phy_ht.c
+++ b/drivers/net/wireless/b43/phy_ht.c
@@ -148,7 +148,7 @@ static void b43_radio_2059_init(struct b43_wldev *dev)
 		b43_radio_mask(dev, 0x17F, ~0x1);
 	}
 
-	b43_radio_mask(dev, 0x11, 0x0008);
+	b43_radio_mask(dev, 0x11, ~0x0008);
 }
 
 /**************************************************
@@ -276,18 +276,25 @@ static void b43_phy_ht_op_software_rfkill(struct b43_wldev *dev,
 	if (b43_read32(dev, B43_MMIO_MACCTL) & B43_MACCTL_ENABLED)
 		b43err(dev->wl, "MAC not suspended\n");
 
+	/* In the following PHY ops we copy wl's dummy behaviour.
+	 * TODO: Find out if reads (currently hidden in masks/masksets) are
+	 * needed and replace following ops with just writes or w&r.
+	 * Note: B43_PHY_HT_RF_CTL1 register is tricky, wrong operation can
+	 * cause delayed (!) machine lock up. */
 	if (blocked) {
-		b43_phy_mask(dev, B43_PHY_HT_RF_CTL1, ~0);
+		b43_phy_mask(dev, B43_PHY_HT_RF_CTL1, 0);
 	} else {
-		b43_phy_mask(dev, B43_PHY_HT_RF_CTL1, ~0);
-		b43_phy_maskset(dev, B43_PHY_HT_RF_CTL1, ~0, 0x1);
-		b43_phy_mask(dev, B43_PHY_HT_RF_CTL1, ~0);
-		b43_phy_maskset(dev, B43_PHY_HT_RF_CTL1, ~0, 0x2);
+		b43_phy_mask(dev, B43_PHY_HT_RF_CTL1, 0);
+		b43_phy_maskset(dev, B43_PHY_HT_RF_CTL1, 0, 0x1);
+		b43_phy_mask(dev, B43_PHY_HT_RF_CTL1, 0);
+		b43_phy_maskset(dev, B43_PHY_HT_RF_CTL1, 0, 0x2);
 
 		if (dev->phy.radio_ver == 0x2059)
 			b43_radio_2059_init(dev);
 		else
 			B43_WARN_ON(1);
+
+		b43_switch_channel(dev, dev->phy.channel);
 	}
 }
 
@@ -329,7 +336,7 @@ static int b43_phy_ht_op_switch_channel(struct b43_wldev *dev,
 static unsigned int b43_phy_ht_op_get_default_chan(struct b43_wldev *dev)
 {
 	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
-		return 1;
+		return 11;
 	return 36;
 }
 
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 95c28f584ed..1ae1e84cb4d 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -611,12 +611,12 @@ static void b43_nphy_bmac_clock_fgc(struct b43_wldev *dev, bool force)
 	switch (dev->dev->bus_type) {
 #ifdef CONFIG_B43_BCMA
 	case B43_BUS_BCMA:
-		tmp = bcma_read32(dev->dev->bdev, BCMA_IOCTL);
+		tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
 		if (force)
 			tmp |= BCMA_IOCTL_FGC;
 		else
 			tmp &= ~BCMA_IOCTL_FGC;
-		bcma_write32(dev->dev->bdev, BCMA_IOCTL, tmp);
+		bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
 		break;
 #endif
 #ifdef CONFIG_B43_SSB
diff --git a/drivers/net/wireless/b43/radio_2059.c b/drivers/net/wireless/b43/radio_2059.c
index 23dea4ba821..f029f6e1f5d 100644
--- a/drivers/net/wireless/b43/radio_2059.c
+++ b/drivers/net/wireless/b43/radio_2059.c
@@ -161,5 +161,14 @@ static const struct b43_phy_ht_channeltab_e_radio2059 b43_phy_ht_channeltab_radi
 const struct b43_phy_ht_channeltab_e_radio2059
 *b43_phy_ht_get_channeltab_e_r2059(struct b43_wldev *dev, u16 freq)
 {
+	const struct b43_phy_ht_channeltab_e_radio2059 *e;
+	unsigned int i;
+
+	e = b43_phy_ht_channeltab_radio2059;
+	for (i = 0; i < ARRAY_SIZE(b43_phy_ht_channeltab_radio2059); i++, e++) {
+		if (e->freq == freq)
+			return e;
+	}
+
 	return NULL;
 }