Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

John W. Linville says:

====================
Please accept the following pull request intended for the 3.13 tree...

I had intended to pass most of these to you as much as two weeks ago.
Unfortunately, I failed to account for the effects of bad Internet
connections and my own fatique/laziness while traveling.  On the bright
side, at least these have been baking in linux-next for some time!

For the mac80211 bits, Johannes says:

"This time I have two fixes for P2P (which requires not using CCK rates)
and a workaround for APs with broken WMM information."

For the iwlwifi bits, Johannes says:

"I have a few fixes for warnings/issues: one from Alex, fixing scan
timings, one from Emmanuel fixing a WARN_ON in the DVM driver, one from
Stanislaw removing a trigger-happy WARN_ON in the MVM driver and a
change from myself to try to recover when the device isn't processing
commands quickly."

And:

"For this round, I have a lot of changes:
 * power management improvements
 * BT coexistence improvements/updates
 * new device support
 * VHT support
 * IBSS support (though due to a small bug it requires new firmware)
 * various other fixes/improvements."

For the Bluetooth bits, Gustavo says:

"More patches for 3.12, busy times for Bluetooth. More than a 100 commits since
the last pull. The bulk of work comes from Johan and Marcel, they are doing
fixes and improvements all over the Bluetooth subsystem, as the diffstat can
show."

For the ath10k and ath6kl bits, Kalle says:

"Bartosz added support to ath10k for our 10.x AP firmware branch, which
gives us AP specific features and fixes. We still support the main
firmware branch as well just like before, ath10k detects runtime what
firmware is used. Unfortunately the firmware interface in 10.x branch is
somewhat different so there was quite a lot of changes in ath10k for
this.

Michal and Sujith did some performance improvements in ath10k. Vladimir
fixed a compiler warning and Fengguang removed an extra semicolon."

For the NFC bits, Samuel says:

"It's a fairly big one, with the following highlights:

- NFC digital layer implementation: Most NFC chipsets implement the NFC
  digital layer in firmware, but others have more basic functionalities
  and expect the host to implement the digital layer. This layer sits
  below the NFC core.

- Sony's port100 support: This is "soft" NFC USB dongle that expects the
  digital layer to be implemented on the host. This is the first user of
  our NFC digital stack implementation.

- Secure element API: We now provide a netlink API for enabling,
  disabling and discovering NFC attached (embedded or UICC ones) secure
  elements. With some userspace help, this allows us to support NFC
  payments.
  Only the pn544 driver currently supports that API.

- NCI SPI fixes and improvements: In order to support NCI devices over
  SPI, we fixed and improved our NCI/SPI implementation. The currently
  most deployed NFC NCI chipset, Broadcom's bcm2079x, supports that mode
  and we're planning to use our NCI/SPI framework to implement a
  driver for it.

- pn533 fragmentation support in target mode: This was the only missing
  feature from our pn533 impementation. We now support fragmentation in
  both Tx and Rx modes, in target mode."

On top of all that, brcmfmac and rt2x00 both get the usual flurry
of updates.  A few other drivers get hit here or there as well.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 106 insertions, 80 deletions

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index e13b1a65c65..3e10b801eee 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -26,7 +26,6 @@
 #include <linux/mmc/sdio.h>
 #include <linux/mmc/sdio_func.h>
 #include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
 #include <linux/platform_data/brcmfmac-sdio.h>
 
 #include <defs.h>
@@ -239,7 +238,9 @@ brcmf_sdio_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
 		func_num = SDIO_FUNC_1;
 		reg_size = 4;
 
-		brcmf_sdio_addrprep(sdiodev, reg_size, &addr);
+		ret = brcmf_sdio_addrprep(sdiodev, reg_size, &addr);
+		if (ret)
+			goto done;
 	}
 
 	do {
@@ -255,6 +256,7 @@ brcmf_sdio_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
 						       func_num, addr, data, 4);
 	} while (ret != 0 && retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
 
+done:
 	if (ret != 0)
 		brcmf_err("failed with %d\n", ret);
 
@@ -315,8 +317,36 @@ void brcmf_sdio_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
 		*ret = retval;
 }
 
+static int brcmf_sdio_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
+			     bool write, u32 addr, struct sk_buff *pkt)
+{
+	unsigned int req_sz;
+
+	brcmf_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait);
+	if (brcmf_pm_resume_error(sdiodev))
+		return -EIO;
+
+	/* Single skb use the standard mmc interface */
+	req_sz = pkt->len + 3;
+	req_sz &= (uint)~3;
+
+	if (write)
+		return sdio_memcpy_toio(sdiodev->func[fn], addr,
+					((u8 *)(pkt->data)),
+					req_sz);
+	else if (fn == 1)
+		return sdio_memcpy_fromio(sdiodev->func[fn],
+					  ((u8 *)(pkt->data)),
+					  addr, req_sz);
+	else
+		/* function 2 read is FIFO operation */
+		return sdio_readsb(sdiodev->func[fn],
+				   ((u8 *)(pkt->data)), addr,
+				   req_sz);
+}
+
 /**
- * brcmf_sdio_buffrw - SDIO interface function for block data access
+ * brcmf_sdio_sglist_rw - SDIO interface function for block data access
  * @sdiodev: brcmfmac sdio device
  * @fn: SDIO function number
  * @write: direction flag
@@ -327,12 +357,13 @@ void brcmf_sdio_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr,
  * stack for block data access. It assumes that the skb passed down by the
  * caller has already been padded and aligned.
  */
-static int brcmf_sdio_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
-			     bool write, u32 addr, struct sk_buff_head *pktlist)
+static int brcmf_sdio_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
+				bool write, u32 addr,
+				struct sk_buff_head *pktlist)
 {
 	unsigned int req_sz, func_blk_sz, sg_cnt, sg_data_sz, pkt_offset;
-	unsigned int max_blks, max_req_sz, orig_offset, dst_offset;
-	unsigned short max_seg_sz, seg_sz;
+	unsigned int max_req_sz, orig_offset, dst_offset;
+	unsigned short max_seg_cnt, seg_sz;
 	unsigned char *pkt_data, *orig_data, *dst_data;
 	struct sk_buff *pkt_next = NULL, *local_pkt_next;
 	struct sk_buff_head local_list, *target_list;
@@ -341,7 +372,6 @@ static int brcmf_sdio_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
 	struct mmc_data mmc_dat;
 	struct sg_table st;
 	struct scatterlist *sgl;
-	struct mmc_host *host;
 	int ret = 0;
 
 	if (!pktlist->qlen)
@@ -351,27 +381,6 @@ static int brcmf_sdio_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
 	if (brcmf_pm_resume_error(sdiodev))
 		return -EIO;
 
-	/* Single skb use the standard mmc interface */
-	if (pktlist->qlen == 1) {
-		pkt_next = pktlist->next;
-		req_sz = pkt_next->len + 3;
-		req_sz &= (uint)~3;
-
-		if (write)
-			return sdio_memcpy_toio(sdiodev->func[fn], addr,
-						((u8 *)(pkt_next->data)),
-						req_sz);
-		else if (fn == 1)
-			return sdio_memcpy_fromio(sdiodev->func[fn],
-						  ((u8 *)(pkt_next->data)),
-						  addr, req_sz);
-		else
-			/* function 2 read is FIFO operation */
-			return sdio_readsb(sdiodev->func[fn],
-					   ((u8 *)(pkt_next->data)), addr,
-					   req_sz);
-	}
-
 	target_list = pktlist;
 	/* for host with broken sg support, prepare a page aligned list */
 	__skb_queue_head_init(&local_list);
@@ -398,38 +407,46 @@ static int brcmf_sdio_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
 		target_list = &local_list;
 	}
 
-	host = sdiodev->func[fn]->card->host;
 	func_blk_sz = sdiodev->func[fn]->cur_blksize;
-	/* Blocks per command is limited by host count, host transfer
-	 * size and the maximum for IO_RW_EXTENDED of 511 blocks.
-	 */
-	max_blks = min_t(unsigned int, host->max_blk_count, 511u);
-	max_req_sz = min_t(unsigned int, host->max_req_size,
-			   max_blks * func_blk_sz);
-	max_seg_sz = min_t(unsigned short, host->max_segs, SG_MAX_SINGLE_ALLOC);
-	max_seg_sz = min_t(unsigned short, max_seg_sz, target_list->qlen);
+	max_req_sz = sdiodev->max_request_size;
+	max_seg_cnt = min_t(unsigned short, sdiodev->max_segment_count,
+			    target_list->qlen);
 	seg_sz = target_list->qlen;
 	pkt_offset = 0;
 	pkt_next = target_list->next;
 
-	if (sg_alloc_table(&st, max_seg_sz, GFP_KERNEL)) {
+	if (sg_alloc_table(&st, max_seg_cnt, GFP_KERNEL)) {
 		ret = -ENOMEM;
 		goto exit;
 	}
 
+	memset(&mmc_req, 0, sizeof(struct mmc_request));
+	memset(&mmc_cmd, 0, sizeof(struct mmc_command));
+	memset(&mmc_dat, 0, sizeof(struct mmc_data));
+
+	mmc_dat.sg = st.sgl;
+	mmc_dat.blksz = func_blk_sz;
+	mmc_dat.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
+	mmc_cmd.opcode = SD_IO_RW_EXTENDED;
+	mmc_cmd.arg = write ? 1<<31 : 0;	/* write flag  */
+	mmc_cmd.arg |= (fn & 0x7) << 28;	/* SDIO func num */
+	mmc_cmd.arg |= 1<<27;			/* block mode */
+	/* for function 1 the addr will be incremented */
+	mmc_cmd.arg |= (fn == 1) ? 1<<26 : 0;
+	mmc_cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC;
+	mmc_req.cmd = &mmc_cmd;
+	mmc_req.data = &mmc_dat;
+
 	while (seg_sz) {
 		req_sz = 0;
 		sg_cnt = 0;
-		memset(&mmc_req, 0, sizeof(struct mmc_request));
-		memset(&mmc_cmd, 0, sizeof(struct mmc_command));
-		memset(&mmc_dat, 0, sizeof(struct mmc_data));
 		sgl = st.sgl;
 		/* prep sg table */
 		while (pkt_next != (struct sk_buff *)target_list) {
 			pkt_data = pkt_next->data + pkt_offset;
 			sg_data_sz = pkt_next->len - pkt_offset;
-			if (sg_data_sz > host->max_seg_size)
-				sg_data_sz = host->max_seg_size;
+			if (sg_data_sz > sdiodev->max_segment_size)
+				sg_data_sz = sdiodev->max_segment_size;
 			if (sg_data_sz > max_req_sz - req_sz)
 				sg_data_sz = max_req_sz - req_sz;
 
@@ -444,7 +461,7 @@ static int brcmf_sdio_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
 				pkt_next = pkt_next->next;
 			}
 
-			if (req_sz >= max_req_sz || sg_cnt >= max_seg_sz)
+			if (req_sz >= max_req_sz || sg_cnt >= max_seg_cnt)
 				break;
 		}
 		seg_sz -= sg_cnt;
@@ -455,27 +472,17 @@ static int brcmf_sdio_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
 			ret = -ENOTBLK;
 			goto exit;
 		}
-		mmc_dat.sg = st.sgl;
+
 		mmc_dat.sg_len = sg_cnt;
-		mmc_dat.blksz = func_blk_sz;
 		mmc_dat.blocks = req_sz / func_blk_sz;
-		mmc_dat.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
-		mmc_cmd.opcode = SD_IO_RW_EXTENDED;
-		mmc_cmd.arg = write ? 1<<31 : 0;	/* write flag  */
-		mmc_cmd.arg |= (fn & 0x7) << 28;	/* SDIO func num */
-		mmc_cmd.arg |= 1<<27;			/* block mode */
-		/* incrementing addr for function 1 */
-		mmc_cmd.arg |= (fn == 1) ? 1<<26 : 0;
 		mmc_cmd.arg |= (addr & 0x1FFFF) << 9;	/* address */
 		mmc_cmd.arg |= mmc_dat.blocks & 0x1FF;	/* block count */
-		mmc_cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC;
-		mmc_req.cmd = &mmc_cmd;
-		mmc_req.data = &mmc_dat;
+		/* incrementing addr for function 1 */
 		if (fn == 1)
 			addr += req_sz;
 
 		mmc_set_data_timeout(&mmc_dat, sdiodev->func[fn]->card);
-		mmc_wait_for_req(host, &mmc_req);
+		mmc_wait_for_req(sdiodev->func[fn]->card->host, &mmc_req);
 
 		ret = mmc_cmd.error ? mmc_cmd.error : mmc_dat.error;
 		if (ret != 0) {
@@ -546,7 +553,6 @@ brcmf_sdcard_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 {
 	uint width;
 	int err = 0;
-	struct sk_buff_head pkt_list;
 
 	brcmf_dbg(SDIO, "fun = %d, addr = 0x%x, size = %d\n",
 		  fn, addr, pkt->len);
@@ -556,19 +562,17 @@ brcmf_sdcard_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 	if (err)
 		goto done;
 
-	skb_queue_head_init(&pkt_list);
-	skb_queue_tail(&pkt_list, pkt);
-	err = brcmf_sdio_buffrw(sdiodev, fn, false, addr, &pkt_list);
-	skb_dequeue_tail(&pkt_list);
+	err = brcmf_sdio_buffrw(sdiodev, fn, false, addr, pkt);
 
 done:
 	return err;
 }
 
 int brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
-			    uint flags, struct sk_buff_head *pktq)
+			    uint flags, struct sk_buff_head *pktq, uint totlen)
 {
-	uint incr_fix;
+	struct sk_buff *glom_skb;
+	struct sk_buff *skb;
 	uint width;
 	int err = 0;
 
@@ -580,8 +584,22 @@ int brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 	if (err)
 		goto done;
 
-	incr_fix = (flags & SDIO_REQ_FIXED) ? SDIOH_DATA_FIX : SDIOH_DATA_INC;
-	err = brcmf_sdio_buffrw(sdiodev, fn, false, addr, pktq);
+	if (pktq->qlen == 1)
+		err = brcmf_sdio_buffrw(sdiodev, fn, false, addr, pktq->next);
+	else if (!sdiodev->sg_support) {
+		glom_skb = brcmu_pkt_buf_get_skb(totlen);
+		if (!glom_skb)
+			return -ENOMEM;
+		err = brcmf_sdio_buffrw(sdiodev, fn, false, addr, glom_skb);
+		if (err)
+			goto done;
+
+		skb_queue_walk(pktq, skb) {
+			memcpy(skb->data, glom_skb->data, skb->len);
+			skb_pull(glom_skb, skb->len);
+		}
+	} else
+		err = brcmf_sdio_sglist_rw(sdiodev, fn, false, addr, pktq);
 
 done:
 	return err;
@@ -592,7 +610,7 @@ brcmf_sdcard_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 		      uint flags, u8 *buf, uint nbytes)
 {
 	struct sk_buff *mypkt;
-	struct sk_buff_head pktq;
+	uint width;
 	int err;
 
 	mypkt = brcmu_pkt_buf_get_skb(nbytes);
@@ -603,10 +621,12 @@ brcmf_sdcard_send_buf(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 	}
 
 	memcpy(mypkt->data, buf, nbytes);
-	__skb_queue_head_init(&pktq);
-	__skb_queue_tail(&pktq, mypkt);
-	err = brcmf_sdcard_send_pkt(sdiodev, addr, fn, flags, &pktq);
-	__skb_dequeue_tail(&pktq);
+
+	width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
+	err = brcmf_sdio_addrprep(sdiodev, width, &addr);
+
+	if (!err)
+		err = brcmf_sdio_buffrw(sdiodev, fn, true, addr, mypkt);
 
 	brcmu_pkt_buf_free_skb(mypkt);
 	return err;
@@ -617,16 +637,26 @@ int
 brcmf_sdcard_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 		      uint flags, struct sk_buff_head *pktq)
 {
+	struct sk_buff *skb;
 	uint width;
-	int err = 0;
+	int err;
 
 	brcmf_dbg(SDIO, "fun = %d, addr = 0x%x, size = %d\n",
 		  fn, addr, pktq->qlen);
 
 	width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
-	brcmf_sdio_addrprep(sdiodev, width, &addr);
+	err = brcmf_sdio_addrprep(sdiodev, width, &addr);
+	if (err)
+		return err;
 
-	err = brcmf_sdio_buffrw(sdiodev, fn, true, addr, pktq);
+	if (pktq->qlen == 1 || !sdiodev->sg_support)
+		skb_queue_walk(pktq, skb) {
+			err = brcmf_sdio_buffrw(sdiodev, fn, true, addr, skb);
+			if (err)
+				break;
+		}
+	else
+		err = brcmf_sdio_sglist_rw(sdiodev, fn, true, addr, pktq);
 
 	return err;
 }
@@ -639,7 +669,6 @@ brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 	struct sk_buff *pkt;
 	u32 sdaddr;
 	uint dsize;
-	struct sk_buff_head pkt_list;
 
 	dsize = min_t(uint, SBSDIO_SB_OFT_ADDR_LIMIT, size);
 	pkt = dev_alloc_skb(dsize);
@@ -648,7 +677,6 @@ brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 		return -EIO;
 	}
 	pkt->priority = 0;
-	skb_queue_head_init(&pkt_list);
 
 	/* Determine initial transfer parameters */
 	sdaddr = address & SBSDIO_SB_OFT_ADDR_MASK;
@@ -676,10 +704,8 @@ brcmf_sdio_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
 		skb_put(pkt, dsize);
 		if (write)
 			memcpy(pkt->data, data, dsize);
-		skb_queue_tail(&pkt_list, pkt);
 		bcmerror = brcmf_sdio_buffrw(sdiodev, SDIO_FUNC_1, write,
-					     sdaddr, &pkt_list);
-		skb_dequeue_tail(&pkt_list);
+					     sdaddr, pkt);
 		if (bcmerror) {
 			brcmf_err("membytes transfer failed\n");
 			break;