drivers/net: Remove boolean comparisons to true/false

Booleans should not be compared to true or false
but be directly tested or tested with !.

Done via cocci script:

@@
bool t;
@@
- t == true
+ t
@@
bool t;
@@
- t != true
+ !t
@@
bool t;
@@
- t == false
+ !t
@@
bool t;
@@
- t != false
+ t

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 10 insertions, 12 deletions

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 6e4b5e85a09..bd2d1dd5a49 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -767,7 +767,7 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
 		brcmf_dbg(INFO, "CLKCTL: turned ON\n");
 
 #if defined(DEBUG)
-		if (bus->alp_only != true) {
+		if (!bus->alp_only) {
 			if (SBSDIO_ALPONLY(clkctl))
 				brcmf_dbg(ERROR, "HT Clock should be on\n");
 		}
@@ -2059,8 +2059,7 @@ static void
 brcmf_sdbrcm_wait_for_event(struct brcmf_sdio *bus, bool *lockvar)
 {
 	up(&bus->sdsem);
-	wait_event_interruptible_timeout(bus->ctrl_wait,
-					 (*lockvar == false), HZ * 2);
+	wait_event_interruptible_timeout(bus->ctrl_wait, !*lockvar, HZ * 2);
 	down(&bus->sdsem);
 	return;
 }
@@ -2647,8 +2646,7 @@ static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt)
 
 	/* Priority based enq */
 	spin_lock_bh(&bus->txqlock);
-	if (brcmf_c_prec_enq(bus->sdiodev->dev, &bus->txq, pkt, prec) ==
-	    false) {
+	if (!brcmf_c_prec_enq(bus->sdiodev->dev, &bus->txq, pkt, prec)) {
 		skb_pull(pkt, SDPCM_HDRLEN);
 		brcmf_txcomplete(bus->sdiodev->dev, pkt, false);
 		brcmu_pkt_buf_free_skb(pkt);
@@ -2935,7 +2933,7 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
 
 		brcmf_sdbrcm_wait_for_event(bus, &bus->ctrl_frame_stat);
 
-		if (bus->ctrl_frame_stat == false) {
+		if (!bus->ctrl_frame_stat) {
 			brcmf_dbg(INFO, "ctrl_frame_stat == false\n");
 			ret = 0;
 		} else {
@@ -2997,7 +2995,7 @@ brcmf_sdbrcm_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen)
 			  rxlen, msglen);
 	} else if (timeleft == 0) {
 		brcmf_dbg(ERROR, "resumed on timeout\n");
-	} else if (pending == true) {
+	} else if (pending) {
 		brcmf_dbg(CTL, "cancelled\n");
 		return -ERESTARTSYS;
 	} else {
@@ -3983,7 +3981,7 @@ void
 brcmf_sdbrcm_wd_timer(struct brcmf_sdio *bus, uint wdtick)
 {
 	/* Totally stop the timer */
-	if (!wdtick && bus->wd_timer_valid == true) {
+	if (!wdtick && bus->wd_timer_valid) {
 		del_timer_sync(&bus->timer);
 		bus->wd_timer_valid = false;
 		bus->save_ms = wdtick;
@@ -3996,7 +3994,7 @@ brcmf_sdbrcm_wd_timer(struct brcmf_sdio *bus, uint wdtick)
 
 	if (wdtick) {
 		if (bus->save_ms != BRCMF_WD_POLL_MS) {
-			if (bus->wd_timer_valid == true)
+			if (bus->wd_timer_valid)
 				/* Stop timer and restart at new value */
 				del_timer_sync(&bus->timer);
 
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index fb712cac915..90331dd22e5 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -3248,7 +3248,7 @@ static void brcms_b_coreinit(struct brcms_c_info *wlc)
 	}
 
 	/* For old ucode, txfifo sizes needs to be modified(increased) */
-	if (fifosz_fixup == true)
+	if (fifosz_fixup)
 		brcms_b_corerev_fifofixup(wlc_hw);
 
 	/* check txfifo allocations match between ucode and driver */
@@ -5427,7 +5427,7 @@ int brcms_c_set_gmode(struct brcms_c_info *wlc, u8 gmode, bool config)
 		return -EINVAL;
 
 	/* update configuration value */
-	if (config == true)
+	if (config)
 		brcms_c_protection_upd(wlc, BRCMS_PROT_G_USER, gmode);
 
 	/* Clear rateset override */
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c
index ec7450d2fbd..62eedd82534 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c
@@ -21464,7 +21464,7 @@ void wlc_phy_antsel_init(struct brcms_phy_pub *ppi, bool lut_init)
 	if (NREV_GE(pi->pubpi.phy_rev, 3)) {
 		u16 v0 = 0x211, v1 = 0x222, v2 = 0x144, v3 = 0x188;
 
-		if (lut_init == false)
+		if (!lut_init)
 			return;
 
 		if (pi->srom_fem2g.antswctrllut == 0) {