Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "This is a re-do of the net-next pull request for the current merge
  window.  The only difference from the one I made the other day is that
  this has Eliezer's interface renames and the timeout handling changes
  made based upon your feedback, as well as a few bug fixes that have
  trickeled in.

  Highlights:

   1) Low latency device polling, eliminating the cost of interrupt
      handling and context switches.  Allows direct polling of a network
      device from socket operations, such as recvmsg() and poll().

      Currently ixgbe, mlx4, and bnx2x support this feature.

      Full high level description, performance numbers, and design in
      commit 0a4db187a999 ("Merge branch 'll_poll'")

      From Eliezer Tamir.

   2) With the routing cache removed, ip_check_mc_rcu() gets exercised
      more than ever before in the case where we have lots of multicast
      addresses.  Use a hash table instead of a simple linked list, from
      Eric Dumazet.

   3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from
      Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski,
      Marek Puzyniak, Michal Kazior, and Sujith Manoharan.

   4) Support reporting the TUN device persist flag to userspace, from
      Pavel Emelyanov.

   5) Allow controlling network device VF link state using netlink, from
      Rony Efraim.

   6) Support GRE tunneling in openvswitch, from Pravin B Shelar.

   7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from
      Daniel Borkmann and Eric Dumazet.

   8) Allow controlling of TCP quickack behavior on a per-route basis,
      from Cong Wang.

   9) Several bug fixes and improvements to vxlan from Stephen
      Hemminger, Pravin B Shelar, and Mike Rapoport.  In particular,
      support receiving on multiple UDP ports.

  10) Major cleanups, particular in the area of debugging and cookie
      lifetime handline, to the SCTP protocol code.  From Daniel
      Borkmann.

  11) Allow packets to cross network namespaces when traversing tunnel
      devices.  From Nicolas Dichtel.

  12) Allow monitoring netlink traffic via AF_PACKET sockets, in a
      manner akin to how we monitor real network traffic via ptype_all.
      From Daniel Borkmann.

  13) Several bug fixes and improvements for the new alx device driver,
      from Johannes Berg.

  14) Fix scalability issues in the netem packet scheduler's time queue,
      by using an rbtree.  From Eric Dumazet.

  15) Several bug fixes in TCP loss recovery handling, from Yuchung
      Cheng.

  16) Add support for GSO segmentation of MPLS packets, from Simon
      Horman.

  17) Make network notifiers have a real data type for the opaque
      pointer that's passed into them.  Use this to properly handle
      network device flag changes in arp_netdev_event().  From Jiri
      Pirko and Timo Teräs.

  18) Convert several drivers over to module_pci_driver(), from Peter
      Huewe.

  19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a
      O(1) calculation instead.  From Eric Dumazet.

  20) Support setting of explicit tunnel peer addresses in ipv6, just
      like ipv4.  From Nicolas Dichtel.

  21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet.

  22) Prevent a single high rate flow from overruning an individual cpu
      during RX packet processing via selective flow shedding.  From
      Willem de Bruijn.

  23) Don't use spinlocks in TCP md5 signing fast paths, from Eric
      Dumazet.

  24) Don't just drop GSO packets which are above the TBF scheduler's
      burst limit, chop them up so they are in-bounds instead.  Also
      from Eric Dumazet.

  25) VLAN offloads are missed when configured on top of a bridge, fix
      from Vlad Yasevich.

  26) Support IPV6 in ping sockets.  From Lorenzo Colitti.

  27) Receive flow steering targets should be updated at poll() time
      too, from David Majnemer.

  28) Fix several corner case regressions in PMTU/redirect handling due
      to the routing cache removal, from Timo Teräs.

  29) We have to be mindful of ipv4 mapped ipv6 sockets in
      upd_v6_push_pending_frames().  From Hannes Frederic Sowa.

  30) Fix L2TP sequence number handling bugs, from James Chapman."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits)
  drivers/net: caif: fix wrong rtnl_is_locked() usage
  drivers/net: enic: release rtnl_lock on error-path
  vhost-net: fix use-after-free in vhost_net_flush
  net: mv643xx_eth: do not use port number as platform device id
  net: sctp: confirm route during forward progress
  virtio_net: fix race in RX VQ processing
  virtio: support unlocked queue poll
  net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit
  Documentation: Fix references to defunct linux-net@vger.kernel.org
  net/fs: change busy poll time accounting
  net: rename low latency sockets functions to busy poll
  bridge: fix some kernel warning in multicast timer
  sfc: Fix memory leak when discarding scattered packets
  sit: fix tunnel update via netlink
  dt:net:stmmac: Add dt specific phy reset callback support.
  dt:net:stmmac: Add support to dwmac version 3.610 and 3.710
  dt:net:stmmac: Allocate platform data only if its NULL.
  net:stmmac: fix memleak in the open method
  ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available
  net: ipv6: fix wrong ping_v6_sendmsg return value
  ...

1 files changed, 461 insertions, 0 deletions

diff --git a/drivers/net/wireless/cw1200/scan.c b/drivers/net/wireless/cw1200/scan.c
new file mode 100644
index 00000000000..ee3c19037aa
--- /dev/null
+++ b/drivers/net/wireless/cw1200/scan.c
@@ -0,0 +1,461 @@
+/*
+ * Scan implementation for ST-Ericsson CW1200 mac80211 drivers
+ *
+ * Copyright (c) 2010, ST-Ericsson
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/sched.h>
+#include "cw1200.h"
+#include "scan.h"
+#include "sta.h"
+#include "pm.h"
+
+static void cw1200_scan_restart_delayed(struct cw1200_common *priv);
+
+static int cw1200_scan_start(struct cw1200_common *priv, struct wsm_scan *scan)
+{
+	int ret, i;
+	int tmo = 2000;
+
+	switch (priv->join_status) {
+	case CW1200_JOIN_STATUS_PRE_STA:
+	case CW1200_JOIN_STATUS_JOINING:
+		return -EBUSY;
+	default:
+		break;
+	}
+
+	wiphy_dbg(priv->hw->wiphy, "[SCAN] hw req, type %d, %d channels, flags: 0x%x.\n",
+		  scan->type, scan->num_channels, scan->flags);
+
+	for (i = 0; i < scan->num_channels; ++i)
+		tmo += scan->ch[i].max_chan_time + 10;
+
+	cancel_delayed_work_sync(&priv->clear_recent_scan_work);
+	atomic_set(&priv->scan.in_progress, 1);
+	atomic_set(&priv->recent_scan, 1);
+	cw1200_pm_stay_awake(&priv->pm_state, tmo * HZ / 1000);
+	queue_delayed_work(priv->workqueue, &priv->scan.timeout,
+			   tmo * HZ / 1000);
+	ret = wsm_scan(priv, scan);
+	if (ret) {
+		atomic_set(&priv->scan.in_progress, 0);
+		cancel_delayed_work_sync(&priv->scan.timeout);
+		cw1200_scan_restart_delayed(priv);
+	}
+	return ret;
+}
+
+int cw1200_hw_scan(struct ieee80211_hw *hw,
+		   struct ieee80211_vif *vif,
+		   struct cfg80211_scan_request *req)
+{
+	struct cw1200_common *priv = hw->priv;
+	struct wsm_template_frame frame = {
+		.frame_type = WSM_FRAME_TYPE_PROBE_REQUEST,
+	};
+	int i, ret;
+
+	if (!priv->vif)
+		return -EINVAL;
+
+	/* Scan when P2P_GO corrupt firmware MiniAP mode */
+	if (priv->join_status == CW1200_JOIN_STATUS_AP)
+		return -EOPNOTSUPP;
+
+	if (req->n_ssids == 1 && !req->ssids[0].ssid_len)
+		req->n_ssids = 0;
+
+	wiphy_dbg(hw->wiphy, "[SCAN] Scan request for %d SSIDs.\n",
+		  req->n_ssids);
+
+	if (req->n_ssids > WSM_SCAN_MAX_NUM_OF_SSIDS)
+		return -EINVAL;
+
+	frame.skb = ieee80211_probereq_get(hw, priv->vif, NULL, 0,
+		req->ie_len);
+	if (!frame.skb)
+		return -ENOMEM;
+
+	if (req->ie_len)
+		memcpy(skb_put(frame.skb, req->ie_len), req->ie, req->ie_len);
+
+	/* will be unlocked in cw1200_scan_work() */
+	down(&priv->scan.lock);
+	mutex_lock(&priv->conf_mutex);
+
+	ret = wsm_set_template_frame(priv, &frame);
+	if (!ret) {
+		/* Host want to be the probe responder. */
+		ret = wsm_set_probe_responder(priv, true);
+	}
+	if (ret) {
+		mutex_unlock(&priv->conf_mutex);
+		up(&priv->scan.lock);
+		dev_kfree_skb(frame.skb);
+		return ret;
+	}
+
+	wsm_lock_tx(priv);
+
+	BUG_ON(priv->scan.req);
+	priv->scan.req = req;
+	priv->scan.n_ssids = 0;
+	priv->scan.status = 0;
+	priv->scan.begin = &req->channels[0];
+	priv->scan.curr = priv->scan.begin;
+	priv->scan.end = &req->channels[req->n_channels];
+	priv->scan.output_power = priv->output_power;
+
+	for (i = 0; i < req->n_ssids; ++i) {
+		struct wsm_ssid *dst = &priv->scan.ssids[priv->scan.n_ssids];
+		memcpy(&dst->ssid[0], req->ssids[i].ssid, sizeof(dst->ssid));
+		dst->length = req->ssids[i].ssid_len;
+		++priv->scan.n_ssids;
+	}
+
+	mutex_unlock(&priv->conf_mutex);
+
+	if (frame.skb)
+		dev_kfree_skb(frame.skb);
+	queue_work(priv->workqueue, &priv->scan.work);
+	return 0;
+}
+
+void cw1200_scan_work(struct work_struct *work)
+{
+	struct cw1200_common *priv = container_of(work, struct cw1200_common,
+							scan.work);
+	struct ieee80211_channel **it;
+	struct wsm_scan scan = {
+		.type = WSM_SCAN_TYPE_FOREGROUND,
+		.flags = WSM_SCAN_FLAG_SPLIT_METHOD,
+	};
+	bool first_run = (priv->scan.begin == priv->scan.curr &&
+			  priv->scan.begin != priv->scan.end);
+	int i;
+
+	if (first_run) {
+		/* Firmware gets crazy if scan request is sent
+		 * when STA is joined but not yet associated.
+		 * Force unjoin in this case.
+		 */
+		if (cancel_delayed_work_sync(&priv->join_timeout) > 0)
+			cw1200_join_timeout(&priv->join_timeout.work);
+	}
+
+	mutex_lock(&priv->conf_mutex);
+
+	if (first_run) {
+		if (priv->join_status == CW1200_JOIN_STATUS_STA &&
+		    !(priv->powersave_mode.mode & WSM_PSM_PS)) {
+			struct wsm_set_pm pm = priv->powersave_mode;
+			pm.mode = WSM_PSM_PS;
+			cw1200_set_pm(priv, &pm);
+		} else if (priv->join_status == CW1200_JOIN_STATUS_MONITOR) {
+			/* FW bug: driver has to restart p2p-dev mode
+			 * after scan
+			 */
+			cw1200_disable_listening(priv);
+		}
+	}
+
+	if (!priv->scan.req || (priv->scan.curr == priv->scan.end)) {
+		if (priv->scan.output_power != priv->output_power)
+			wsm_set_output_power(priv, priv->output_power * 10);
+		if (priv->join_status == CW1200_JOIN_STATUS_STA &&
+		    !(priv->powersave_mode.mode & WSM_PSM_PS))
+			cw1200_set_pm(priv, &priv->powersave_mode);
+
+		if (priv->scan.status < 0)
+			wiphy_dbg(priv->hw->wiphy, "[SCAN] Scan failed (%d).\n",
+				  priv->scan.status);
+		else if (priv->scan.req)
+			wiphy_dbg(priv->hw->wiphy,
+				  "[SCAN] Scan completed.\n");
+		else
+			wiphy_dbg(priv->hw->wiphy,
+				  "[SCAN] Scan canceled.\n");
+
+		priv->scan.req = NULL;
+		cw1200_scan_restart_delayed(priv);
+		wsm_unlock_tx(priv);
+		mutex_unlock(&priv->conf_mutex);
+		ieee80211_scan_completed(priv->hw, priv->scan.status ? 1 : 0);
+		up(&priv->scan.lock);
+		return;
+	} else {
+		struct ieee80211_channel *first = *priv->scan.curr;
+		for (it = priv->scan.curr + 1, i = 1;
+		     it != priv->scan.end && i < WSM_SCAN_MAX_NUM_OF_CHANNELS;
+		     ++it, ++i) {
+			if ((*it)->band != first->band)
+				break;
+			if (((*it)->flags ^ first->flags) &
+					IEEE80211_CHAN_PASSIVE_SCAN)
+				break;
+			if (!(first->flags & IEEE80211_CHAN_PASSIVE_SCAN) &&
+			    (*it)->max_power != first->max_power)
+				break;
+		}
+		scan.band = first->band;
+
+		if (priv->scan.req->no_cck)
+			scan.max_tx_rate = WSM_TRANSMIT_RATE_6;
+		else
+			scan.max_tx_rate = WSM_TRANSMIT_RATE_1;
+		scan.num_probes =
+			(first->flags & IEEE80211_CHAN_PASSIVE_SCAN) ? 0 : 2;
+		scan.num_ssids = priv->scan.n_ssids;
+		scan.ssids = &priv->scan.ssids[0];
+		scan.num_channels = it - priv->scan.curr;
+		/* TODO: Is it optimal? */
+		scan.probe_delay = 100;
+		/* It is not stated in WSM specification, however
+		 * FW team says that driver may not use FG scan
+		 * when joined.
+		 */
+		if (priv->join_status == CW1200_JOIN_STATUS_STA) {
+			scan.type = WSM_SCAN_TYPE_BACKGROUND;
+			scan.flags = WSM_SCAN_FLAG_FORCE_BACKGROUND;
+		}
+		scan.ch = kzalloc(
+			sizeof(struct wsm_scan_ch) * (it - priv->scan.curr),
+			GFP_KERNEL);
+		if (!scan.ch) {
+			priv->scan.status = -ENOMEM;
+			goto fail;
+		}
+		for (i = 0; i < scan.num_channels; ++i) {
+			scan.ch[i].number = priv->scan.curr[i]->hw_value;
+			if (priv->scan.curr[i]->flags & IEEE80211_CHAN_PASSIVE_SCAN) {
+				scan.ch[i].min_chan_time = 50;
+				scan.ch[i].max_chan_time = 100;
+			} else {
+				scan.ch[i].min_chan_time = 10;
+				scan.ch[i].max_chan_time = 25;
+			}
+		}
+		if (!(first->flags & IEEE80211_CHAN_PASSIVE_SCAN) &&
+		    priv->scan.output_power != first->max_power) {
+			priv->scan.output_power = first->max_power;
+			wsm_set_output_power(priv,
+					     priv->scan.output_power * 10);
+		}
+		priv->scan.status = cw1200_scan_start(priv, &scan);
+		kfree(scan.ch);
+		if (priv->scan.status)
+			goto fail;
+		priv->scan.curr = it;
+	}
+	mutex_unlock(&priv->conf_mutex);
+	return;
+
+fail:
+	priv->scan.curr = priv->scan.end;
+	mutex_unlock(&priv->conf_mutex);
+	queue_work(priv->workqueue, &priv->scan.work);
+	return;
+}
+
+static void cw1200_scan_restart_delayed(struct cw1200_common *priv)
+{
+	/* FW bug: driver has to restart p2p-dev mode after scan. */
+	if (priv->join_status == CW1200_JOIN_STATUS_MONITOR) {
+		cw1200_enable_listening(priv);
+		cw1200_update_filtering(priv);
+	}
+
+	if (priv->delayed_unjoin) {
+		priv->delayed_unjoin = false;
+		if (queue_work(priv->workqueue, &priv->unjoin_work) <= 0)
+			wsm_unlock_tx(priv);
+	} else if (priv->delayed_link_loss) {
+			wiphy_dbg(priv->hw->wiphy, "[CQM] Requeue BSS loss.\n");
+			priv->delayed_link_loss = 0;
+			cw1200_cqm_bssloss_sm(priv, 1, 0, 0);
+	}
+}
+
+static void cw1200_scan_complete(struct cw1200_common *priv)
+{
+	queue_delayed_work(priv->workqueue, &priv->clear_recent_scan_work, HZ);
+	if (priv->scan.direct_probe) {
+		wiphy_dbg(priv->hw->wiphy, "[SCAN] Direct probe complete.\n");
+		cw1200_scan_restart_delayed(priv);
+		priv->scan.direct_probe = 0;
+		up(&priv->scan.lock);
+		wsm_unlock_tx(priv);
+	} else {
+		cw1200_scan_work(&priv->scan.work);
+	}
+}
+
+void cw1200_scan_failed_cb(struct cw1200_common *priv)
+{
+	if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
+		/* STA is stopped. */
+		return;
+
+	if (cancel_delayed_work_sync(&priv->scan.timeout) > 0) {
+		priv->scan.status = -EIO;
+		queue_delayed_work(priv->workqueue, &priv->scan.timeout, 0);
+	}
+}
+
+
+void cw1200_scan_complete_cb(struct cw1200_common *priv,
+				struct wsm_scan_complete *arg)
+{
+	if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
+		/* STA is stopped. */
+		return;
+
+	if (cancel_delayed_work_sync(&priv->scan.timeout) > 0) {
+		priv->scan.status = 1;
+		queue_delayed_work(priv->workqueue, &priv->scan.timeout, 0);
+	}
+}
+
+void cw1200_clear_recent_scan_work(struct work_struct *work)
+{
+	struct cw1200_common *priv =
+		container_of(work, struct cw1200_common,
+			     clear_recent_scan_work.work);
+	atomic_xchg(&priv->recent_scan, 0);
+}
+
+void cw1200_scan_timeout(struct work_struct *work)
+{
+	struct cw1200_common *priv =
+		container_of(work, struct cw1200_common, scan.timeout.work);
+	if (atomic_xchg(&priv->scan.in_progress, 0)) {
+		if (priv->scan.status > 0) {
+			priv->scan.status = 0;
+		} else if (!priv->scan.status) {
+			wiphy_warn(priv->hw->wiphy,
+				   "Timeout waiting for scan complete notification.\n");
+			priv->scan.status = -ETIMEDOUT;
+			priv->scan.curr = priv->scan.end;
+			wsm_stop_scan(priv);
+		}
+		cw1200_scan_complete(priv);
+	}
+}
+
+void cw1200_probe_work(struct work_struct *work)
+{
+	struct cw1200_common *priv =
+		container_of(work, struct cw1200_common, scan.probe_work.work);
+	u8 queue_id = cw1200_queue_get_queue_id(priv->pending_frame_id);
+	struct cw1200_queue *queue = &priv->tx_queue[queue_id];
+	const struct cw1200_txpriv *txpriv;
+	struct wsm_tx *wsm;
+	struct wsm_template_frame frame = {
+		.frame_type = WSM_FRAME_TYPE_PROBE_REQUEST,
+	};
+	struct wsm_ssid ssids[1] = {{
+		.length = 0,
+	} };
+	struct wsm_scan_ch ch[1] = {{
+		.min_chan_time = 0,
+		.max_chan_time = 10,
+	} };
+	struct wsm_scan scan = {
+		.type = WSM_SCAN_TYPE_FOREGROUND,
+		.num_probes = 1,
+		.probe_delay = 0,
+		.num_channels = 1,
+		.ssids = ssids,
+		.ch = ch,
+	};
+	u8 *ies;
+	size_t ies_len;
+	int ret;
+
+	wiphy_dbg(priv->hw->wiphy, "[SCAN] Direct probe work.\n");
+
+	mutex_lock(&priv->conf_mutex);
+	if (down_trylock(&priv->scan.lock)) {
+		/* Scan is already in progress. Requeue self. */
+		schedule();
+		queue_delayed_work(priv->workqueue,
+				   &priv->scan.probe_work, HZ / 10);
+		mutex_unlock(&priv->conf_mutex);
+		return;
+	}
+
+	/* Make sure we still have a pending probe req */
+	if (cw1200_queue_get_skb(queue,	priv->pending_frame_id,
+				 &frame.skb, &txpriv)) {
+		up(&priv->scan.lock);
+		mutex_unlock(&priv->conf_mutex);
+		wsm_unlock_tx(priv);
+		return;
+	}
+	wsm = (struct wsm_tx *)frame.skb->data;
+	scan.max_tx_rate = wsm->max_tx_rate;
+	scan.band = (priv->channel->band == IEEE80211_BAND_5GHZ) ?
+		WSM_PHY_BAND_5G : WSM_PHY_BAND_2_4G;
+	if (priv->join_status == CW1200_JOIN_STATUS_STA ||
+	    priv->join_status == CW1200_JOIN_STATUS_IBSS) {
+		scan.type = WSM_SCAN_TYPE_BACKGROUND;
+		scan.flags = WSM_SCAN_FLAG_FORCE_BACKGROUND;
+	}
+	ch[0].number = priv->channel->hw_value;
+
+	skb_pull(frame.skb, txpriv->offset);
+
+	ies = &frame.skb->data[sizeof(struct ieee80211_hdr_3addr)];
+	ies_len = frame.skb->len - sizeof(struct ieee80211_hdr_3addr);
+
+	if (ies_len) {
+		u8 *ssidie =
+			(u8 *)cfg80211_find_ie(WLAN_EID_SSID, ies, ies_len);
+		if (ssidie && ssidie[1] && ssidie[1] <= sizeof(ssids[0].ssid)) {
+			u8 *nextie = &ssidie[2 + ssidie[1]];
+			/* Remove SSID from the IE list. It has to be provided
+			 * as a separate argument in cw1200_scan_start call
+			 */
+
+			/* Store SSID localy */
+			ssids[0].length = ssidie[1];
+			memcpy(ssids[0].ssid, &ssidie[2], ssids[0].length);
+			scan.num_ssids = 1;
+
+			/* Remove SSID from IE list */
+			ssidie[1] = 0;
+			memmove(&ssidie[2], nextie, &ies[ies_len] - nextie);
+			skb_trim(frame.skb, frame.skb->len - ssids[0].length);
+		}
+	}
+
+	/* FW bug: driver has to restart p2p-dev mode after scan */
+	if (priv->join_status == CW1200_JOIN_STATUS_MONITOR)
+		cw1200_disable_listening(priv);
+	ret = wsm_set_template_frame(priv, &frame);
+	priv->scan.direct_probe = 1;
+	if (!ret) {
+		wsm_flush_tx(priv);
+		ret = cw1200_scan_start(priv, &scan);
+	}
+	mutex_unlock(&priv->conf_mutex);
+
+	skb_push(frame.skb, txpriv->offset);
+	if (!ret)
+		IEEE80211_SKB_CB(frame.skb)->flags |= IEEE80211_TX_STAT_ACK;
+	BUG_ON(cw1200_queue_remove(queue, priv->pending_frame_id));
+
+	if (ret) {
+		priv->scan.direct_probe = 0;
+		up(&priv->scan.lock);
+		wsm_unlock_tx(priv);
+	}
+
+	return;
+}