Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 78 insertions, 0 deletions

diff --git a/drivers/net/wireless/ieee802_11.h b/drivers/net/wireless/ieee802_11.h
new file mode 100644
index 00000000000..53dd5248f9f
--- /dev/null
+++ b/drivers/net/wireless/ieee802_11.h
@@ -0,0 +1,78 @@
+#ifndef _IEEE802_11_H
+#define _IEEE802_11_H
+
+#define IEEE802_11_DATA_LEN		2304
+/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
+   6.2.1.1.2.
+
+   The figure in section 7.1.2 suggests a body size of up to 2312
+   bytes is allowed, which is a bit confusing, I suspect this
+   represents the 2304 bytes of real data, plus a possible 8 bytes of
+   WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
+
+
+#define IEEE802_11_HLEN			30
+#define IEEE802_11_FRAME_LEN		(IEEE802_11_DATA_LEN + IEEE802_11_HLEN)
+
+struct ieee802_11_hdr {
+	u16 frame_ctl;
+	u16 duration_id;
+	u8 addr1[ETH_ALEN];
+	u8 addr2[ETH_ALEN];
+	u8 addr3[ETH_ALEN];
+	u16 seq_ctl;
+	u8 addr4[ETH_ALEN];
+} __attribute__ ((packed));
+
+/* Frame control field constants */
+#define IEEE802_11_FCTL_VERS		0x0002
+#define IEEE802_11_FCTL_FTYPE		0x000c
+#define IEEE802_11_FCTL_STYPE		0x00f0
+#define IEEE802_11_FCTL_TODS		0x0100
+#define IEEE802_11_FCTL_FROMDS		0x0200
+#define IEEE802_11_FCTL_MOREFRAGS	0x0400
+#define IEEE802_11_FCTL_RETRY		0x0800
+#define IEEE802_11_FCTL_PM		0x1000
+#define IEEE802_11_FCTL_MOREDATA	0x2000
+#define IEEE802_11_FCTL_WEP		0x4000
+#define IEEE802_11_FCTL_ORDER		0x8000
+
+#define IEEE802_11_FTYPE_MGMT		0x0000
+#define IEEE802_11_FTYPE_CTL		0x0004
+#define IEEE802_11_FTYPE_DATA		0x0008
+
+/* management */
+#define IEEE802_11_STYPE_ASSOC_REQ	0x0000
+#define IEEE802_11_STYPE_ASSOC_RESP 	0x0010
+#define IEEE802_11_STYPE_REASSOC_REQ	0x0020
+#define IEEE802_11_STYPE_REASSOC_RESP	0x0030
+#define IEEE802_11_STYPE_PROBE_REQ	0x0040
+#define IEEE802_11_STYPE_PROBE_RESP	0x0050
+#define IEEE802_11_STYPE_BEACON		0x0080
+#define IEEE802_11_STYPE_ATIM		0x0090
+#define IEEE802_11_STYPE_DISASSOC	0x00A0
+#define IEEE802_11_STYPE_AUTH		0x00B0
+#define IEEE802_11_STYPE_DEAUTH		0x00C0
+
+/* control */
+#define IEEE802_11_STYPE_PSPOLL		0x00A0
+#define IEEE802_11_STYPE_RTS		0x00B0
+#define IEEE802_11_STYPE_CTS		0x00C0
+#define IEEE802_11_STYPE_ACK		0x00D0
+#define IEEE802_11_STYPE_CFEND		0x00E0
+#define IEEE802_11_STYPE_CFENDACK	0x00F0
+
+/* data */
+#define IEEE802_11_STYPE_DATA		0x0000
+#define IEEE802_11_STYPE_DATA_CFACK	0x0010
+#define IEEE802_11_STYPE_DATA_CFPOLL	0x0020
+#define IEEE802_11_STYPE_DATA_CFACKPOLL	0x0030
+#define IEEE802_11_STYPE_NULLFUNC	0x0040
+#define IEEE802_11_STYPE_CFACK		0x0050
+#define IEEE802_11_STYPE_CFPOLL		0x0060
+#define IEEE802_11_STYPE_CFACKPOLL	0x0070
+
+#define IEEE802_11_SCTL_FRAG		0x000F
+#define IEEE802_11_SCTL_SEQ		0xFFF0
+
+#endif /* _IEEE802_11_H */