Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem

1 files changed, 5707 insertions, 0 deletions

diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c
new file mode 100644
index 00000000000..7e2924f332a
--- /dev/null
+++ b/drivers/net/wireless/iwlegacy/common.c
@@ -0,0 +1,5707 @@
+/******************************************************************************
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/etherdevice.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/lockdep.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/skbuff.h>
+#include <net/mac80211.h>
+
+#include "common.h"
+
+const char *
+il_get_cmd_string(u8 cmd)
+{
+	switch (cmd) {
+		IL_CMD(N_ALIVE);
+		IL_CMD(N_ERROR);
+		IL_CMD(C_RXON);
+		IL_CMD(C_RXON_ASSOC);
+		IL_CMD(C_QOS_PARAM);
+		IL_CMD(C_RXON_TIMING);
+		IL_CMD(C_ADD_STA);
+		IL_CMD(C_REM_STA);
+		IL_CMD(C_WEPKEY);
+		IL_CMD(N_3945_RX);
+		IL_CMD(C_TX);
+		IL_CMD(C_RATE_SCALE);
+		IL_CMD(C_LEDS);
+		IL_CMD(C_TX_LINK_QUALITY_CMD);
+		IL_CMD(C_CHANNEL_SWITCH);
+		IL_CMD(N_CHANNEL_SWITCH);
+		IL_CMD(C_SPECTRUM_MEASUREMENT);
+		IL_CMD(N_SPECTRUM_MEASUREMENT);
+		IL_CMD(C_POWER_TBL);
+		IL_CMD(N_PM_SLEEP);
+		IL_CMD(N_PM_DEBUG_STATS);
+		IL_CMD(C_SCAN);
+		IL_CMD(C_SCAN_ABORT);
+		IL_CMD(N_SCAN_START);
+		IL_CMD(N_SCAN_RESULTS);
+		IL_CMD(N_SCAN_COMPLETE);
+		IL_CMD(N_BEACON);
+		IL_CMD(C_TX_BEACON);
+		IL_CMD(C_TX_PWR_TBL);
+		IL_CMD(C_BT_CONFIG);
+		IL_CMD(C_STATS);
+		IL_CMD(N_STATS);
+		IL_CMD(N_CARD_STATE);
+		IL_CMD(N_MISSED_BEACONS);
+		IL_CMD(C_CT_KILL_CONFIG);
+		IL_CMD(C_SENSITIVITY);
+		IL_CMD(C_PHY_CALIBRATION);
+		IL_CMD(N_RX_PHY);
+		IL_CMD(N_RX_MPDU);
+		IL_CMD(N_RX);
+		IL_CMD(N_COMPRESSED_BA);
+	default:
+		return "UNKNOWN";
+
+	}
+}
+EXPORT_SYMBOL(il_get_cmd_string);
+
+#define HOST_COMPLETE_TIMEOUT (HZ / 2)
+
+static void
+il_generic_cmd_callback(struct il_priv *il, struct il_device_cmd *cmd,
+			struct il_rx_pkt *pkt)
+{
+	if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
+		IL_ERR("Bad return from %s (0x%08X)\n",
+		       il_get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags);
+		return;
+	}
+#ifdef CONFIG_IWLEGACY_DEBUG
+	switch (cmd->hdr.cmd) {
+	case C_TX_LINK_QUALITY_CMD:
+	case C_SENSITIVITY:
+		D_HC_DUMP("back from %s (0x%08X)\n",
+			  il_get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags);
+		break;
+	default:
+		D_HC("back from %s (0x%08X)\n", il_get_cmd_string(cmd->hdr.cmd),
+		     pkt->hdr.flags);
+	}
+#endif
+}
+
+static int
+il_send_cmd_async(struct il_priv *il, struct il_host_cmd *cmd)
+{
+	int ret;
+
+	BUG_ON(!(cmd->flags & CMD_ASYNC));
+
+	/* An asynchronous command can not expect an SKB to be set. */
+	BUG_ON(cmd->flags & CMD_WANT_SKB);
+
+	/* Assign a generic callback if one is not provided */
+	if (!cmd->callback)
+		cmd->callback = il_generic_cmd_callback;
+
+	if (test_bit(S_EXIT_PENDING, &il->status))
+		return -EBUSY;
+
+	ret = il_enqueue_hcmd(il, cmd);
+	if (ret < 0) {
+		IL_ERR("Error sending %s: enqueue_hcmd failed: %d\n",
+		       il_get_cmd_string(cmd->id), ret);
+		return ret;
+	}
+	return 0;
+}
+
+int
+il_send_cmd_sync(struct il_priv *il, struct il_host_cmd *cmd)
+{
+	int cmd_idx;
+	int ret;
+
+	lockdep_assert_held(&il->mutex);
+
+	BUG_ON(cmd->flags & CMD_ASYNC);
+
+	/* A synchronous command can not have a callback set. */
+	BUG_ON(cmd->callback);
+
+	D_INFO("Attempting to send sync command %s\n",
+	       il_get_cmd_string(cmd->id));
+
+	set_bit(S_HCMD_ACTIVE, &il->status);
+	D_INFO("Setting HCMD_ACTIVE for command %s\n",
+	       il_get_cmd_string(cmd->id));
+
+	cmd_idx = il_enqueue_hcmd(il, cmd);
+	if (cmd_idx < 0) {
+		ret = cmd_idx;
+		IL_ERR("Error sending %s: enqueue_hcmd failed: %d\n",
+		       il_get_cmd_string(cmd->id), ret);
+		goto out;
+	}
+
+	ret = wait_event_timeout(il->wait_command_queue,
+				 !test_bit(S_HCMD_ACTIVE, &il->status),
+				 HOST_COMPLETE_TIMEOUT);
+	if (!ret) {
+		if (test_bit(S_HCMD_ACTIVE, &il->status)) {
+			IL_ERR("Error sending %s: time out after %dms.\n",
+			       il_get_cmd_string(cmd->id),
+			       jiffies_to_msecs(HOST_COMPLETE_TIMEOUT));
+
+			clear_bit(S_HCMD_ACTIVE, &il->status);
+			D_INFO("Clearing HCMD_ACTIVE for command %s\n",
+			       il_get_cmd_string(cmd->id));
+			ret = -ETIMEDOUT;
+			goto cancel;
+		}
+	}
+
+	if (test_bit(S_RF_KILL_HW, &il->status)) {
+		IL_ERR("Command %s aborted: RF KILL Switch\n",
+		       il_get_cmd_string(cmd->id));
+		ret = -ECANCELED;
+		goto fail;
+	}
+	if (test_bit(S_FW_ERROR, &il->status)) {
+		IL_ERR("Command %s failed: FW Error\n",
+		       il_get_cmd_string(cmd->id));
+		ret = -EIO;
+		goto fail;
+	}
+	if ((cmd->flags & CMD_WANT_SKB) && !cmd->reply_page) {
+		IL_ERR("Error: Response NULL in '%s'\n",
+		       il_get_cmd_string(cmd->id));
+		ret = -EIO;
+		goto cancel;
+	}
+
+	ret = 0;
+	goto out;
+
+cancel:
+	if (cmd->flags & CMD_WANT_SKB) {
+		/*
+		 * Cancel the CMD_WANT_SKB flag for the cmd in the
+		 * TX cmd queue. Otherwise in case the cmd comes
+		 * in later, it will possibly set an invalid
+		 * address (cmd->meta.source).
+		 */
+		il->txq[il->cmd_queue].meta[cmd_idx].flags &= ~CMD_WANT_SKB;
+	}
+fail:
+	if (cmd->reply_page) {
+		il_free_pages(il, cmd->reply_page);
+		cmd->reply_page = 0;
+	}
+out:
+	return ret;
+}
+EXPORT_SYMBOL(il_send_cmd_sync);
+
+int
+il_send_cmd(struct il_priv *il, struct il_host_cmd *cmd)
+{
+	if (cmd->flags & CMD_ASYNC)
+		return il_send_cmd_async(il, cmd);
+
+	return il_send_cmd_sync(il, cmd);
+}
+EXPORT_SYMBOL(il_send_cmd);
+
+int
+il_send_cmd_pdu(struct il_priv *il, u8 id, u16 len, const void *data)
+{
+	struct il_host_cmd cmd = {
+		.id = id,
+		.len = len,
+		.data = data,
+	};
+
+	return il_send_cmd_sync(il, &cmd);
+}
+EXPORT_SYMBOL(il_send_cmd_pdu);
+
+int
+il_send_cmd_pdu_async(struct il_priv *il, u8 id, u16 len, const void *data,
+		      void (*callback) (struct il_priv *il,
+					struct il_device_cmd *cmd,
+					struct il_rx_pkt *pkt))
+{
+	struct il_host_cmd cmd = {
+		.id = id,
+		.len = len,
+		.data = data,
+	};
+
+	cmd.flags |= CMD_ASYNC;
+	cmd.callback = callback;
+
+	return il_send_cmd_async(il, &cmd);
+}
+EXPORT_SYMBOL(il_send_cmd_pdu_async);
+
+/* default: IL_LED_BLINK(0) using blinking idx table */
+static int led_mode;
+module_param(led_mode, int, S_IRUGO);
+MODULE_PARM_DESC(led_mode,
+		 "0=system default, " "1=On(RF On)/Off(RF Off), 2=blinking");
+
+/* Throughput		OFF time(ms)	ON time (ms)
+ *	>300			25		25
+ *	>200 to 300		40		40
+ *	>100 to 200		55		55
+ *	>70 to 100		65		65
+ *	>50 to 70		75		75
+ *	>20 to 50		85		85
+ *	>10 to 20		95		95
+ *	>5 to 10		110		110
+ *	>1 to 5			130		130
+ *	>0 to 1			167		167
+ *	<=0					SOLID ON
+ */
+static const struct ieee80211_tpt_blink il_blink[] = {
+	{.throughput = 0,		.blink_time = 334},
+	{.throughput = 1 * 1024 - 1,	.blink_time = 260},
+	{.throughput = 5 * 1024 - 1,	.blink_time = 220},
+	{.throughput = 10 * 1024 - 1,	.blink_time = 190},
+	{.throughput = 20 * 1024 - 1,	.blink_time = 170},
+	{.throughput = 50 * 1024 - 1,	.blink_time = 150},
+	{.throughput = 70 * 1024 - 1,	.blink_time = 130},
+	{.throughput = 100 * 1024 - 1,	.blink_time = 110},
+	{.throughput = 200 * 1024 - 1,	.blink_time = 80},
+	{.throughput = 300 * 1024 - 1,	.blink_time = 50},
+};
+
+/*
+ * Adjust led blink rate to compensate on a MAC Clock difference on every HW
+ * Led blink rate analysis showed an average deviation of 0% on 3945,
+ * 5% on 4965 HW.
+ * Need to compensate on the led on/off time per HW according to the deviation
+ * to achieve the desired led frequency
+ * The calculation is: (100-averageDeviation)/100 * blinkTime
+ * For code efficiency the calculation will be:
+ *     compensation = (100 - averageDeviation) * 64 / 100
+ *     NewBlinkTime = (compensation * BlinkTime) / 64
+ */
+static inline u8
+il_blink_compensation(struct il_priv *il, u8 time, u16 compensation)
+{
+	if (!compensation) {
+		IL_ERR("undefined blink compensation: "
+		       "use pre-defined blinking time\n");
+		return time;
+	}
+
+	return (u8) ((time * compensation) >> 6);
+}
+
+/* Set led pattern command */
+static int
+il_led_cmd(struct il_priv *il, unsigned long on, unsigned long off)
+{
+	struct il_led_cmd led_cmd = {
+		.id = IL_LED_LINK,
+		.interval = IL_DEF_LED_INTRVL
+	};
+	int ret;
+
+	if (!test_bit(S_READY, &il->status))
+		return -EBUSY;
+
+	if (il->blink_on == on && il->blink_off == off)
+		return 0;
+
+	if (off == 0) {
+		/* led is SOLID_ON */
+		on = IL_LED_SOLID;
+	}
+
+	D_LED("Led blink time compensation=%u\n",
+	      il->cfg->base_params->led_compensation);
+	led_cmd.on =
+	    il_blink_compensation(il, on,
+				  il->cfg->base_params->led_compensation);
+	led_cmd.off =
+	    il_blink_compensation(il, off,
+				  il->cfg->base_params->led_compensation);
+
+	ret = il->cfg->ops->led->cmd(il, &led_cmd);
+	if (!ret) {
+		il->blink_on = on;
+		il->blink_off = off;
+	}
+	return ret;
+}
+
+static void
+il_led_brightness_set(struct led_classdev *led_cdev,
+		      enum led_brightness brightness)
+{
+	struct il_priv *il = container_of(led_cdev, struct il_priv, led);
+	unsigned long on = 0;
+
+	if (brightness > 0)
+		on = IL_LED_SOLID;
+
+	il_led_cmd(il, on, 0);
+}
+
+static int
+il_led_blink_set(struct led_classdev *led_cdev, unsigned long *delay_on,
+		 unsigned long *delay_off)
+{
+	struct il_priv *il = container_of(led_cdev, struct il_priv, led);
+
+	return il_led_cmd(il, *delay_on, *delay_off);
+}
+
+void
+il_leds_init(struct il_priv *il)
+{
+	int mode = led_mode;
+	int ret;
+
+	if (mode == IL_LED_DEFAULT)
+		mode = il->cfg->led_mode;
+
+	il->led.name =
+	    kasprintf(GFP_KERNEL, "%s-led", wiphy_name(il->hw->wiphy));
+	il->led.brightness_set = il_led_brightness_set;
+	il->led.blink_set = il_led_blink_set;
+	il->led.max_brightness = 1;
+
+	switch (mode) {
+	case IL_LED_DEFAULT:
+		WARN_ON(1);
+		break;
+	case IL_LED_BLINK:
+		il->led.default_trigger =
+		    ieee80211_create_tpt_led_trigger(il->hw,
+						     IEEE80211_TPT_LEDTRIG_FL_CONNECTED,
+						     il_blink,
+						     ARRAY_SIZE(il_blink));
+		break;
+	case IL_LED_RF_STATE:
+		il->led.default_trigger = ieee80211_get_radio_led_name(il->hw);
+		break;
+	}
+
+	ret = led_classdev_register(&il->pci_dev->dev, &il->led);
+	if (ret) {
+		kfree(il->led.name);
+		return;
+	}
+
+	il->led_registered = true;
+}
+EXPORT_SYMBOL(il_leds_init);
+
+void
+il_leds_exit(struct il_priv *il)
+{
+	if (!il->led_registered)
+		return;
+
+	led_classdev_unregister(&il->led);
+	kfree(il->led.name);
+}
+EXPORT_SYMBOL(il_leds_exit);
+
+/************************** EEPROM BANDS ****************************
+ *
+ * The il_eeprom_band definitions below provide the mapping from the
+ * EEPROM contents to the specific channel number supported for each
+ * band.
+ *
+ * For example, il_priv->eeprom.band_3_channels[4] from the band_3
+ * definition below maps to physical channel 42 in the 5.2GHz spectrum.
+ * The specific geography and calibration information for that channel
+ * is contained in the eeprom map itself.
+ *
+ * During init, we copy the eeprom information and channel map
+ * information into il->channel_info_24/52 and il->channel_map_24/52
+ *
+ * channel_map_24/52 provides the idx in the channel_info array for a
+ * given channel.  We have to have two separate maps as there is channel
+ * overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and
+ * band_2
+ *
+ * A value of 0xff stored in the channel_map indicates that the channel
+ * is not supported by the hardware at all.
+ *
+ * A value of 0xfe in the channel_map indicates that the channel is not
+ * valid for Tx with the current hardware.  This means that
+ * while the system can tune and receive on a given channel, it may not
+ * be able to associate or transmit any frames on that
+ * channel.  There is no corresponding channel information for that
+ * entry.
+ *
+ *********************************************************************/
+
+/* 2.4 GHz */
+const u8 il_eeprom_band_1[14] = {
+	1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
+};
+
+/* 5.2 GHz bands */
+static const u8 il_eeprom_band_2[] = {	/* 4915-5080MHz */
+	183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16
+};
+
+static const u8 il_eeprom_band_3[] = {	/* 5170-5320MHz */
+	34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
+};
+
+static const u8 il_eeprom_band_4[] = {	/* 5500-5700MHz */
+	100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
+};
+
+static const u8 il_eeprom_band_5[] = {	/* 5725-5825MHz */
+	145, 149, 153, 157, 161, 165
+};
+
+static const u8 il_eeprom_band_6[] = {	/* 2.4 ht40 channel */
+	1, 2, 3, 4, 5, 6, 7
+};
+
+static const u8 il_eeprom_band_7[] = {	/* 5.2 ht40 channel */
+	36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157
+};
+
+/******************************************************************************
+ *
+ * EEPROM related functions
+ *
+******************************************************************************/
+
+static int
+il_eeprom_verify_signature(struct il_priv *il)
+{
+	u32 gp = _il_rd(il, CSR_EEPROM_GP) & CSR_EEPROM_GP_VALID_MSK;
+	int ret = 0;
+
+	D_EEPROM("EEPROM signature=0x%08x\n", gp);
+	switch (gp) {
+	case CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K:
+	case CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K:
+		break;
+	default:
+		IL_ERR("bad EEPROM signature," "EEPROM_GP=0x%08x\n", gp);
+		ret = -ENOENT;
+		break;
+	}
+	return ret;
+}
+
+const u8 *
+il_eeprom_query_addr(const struct il_priv *il, size_t offset)
+{
+	BUG_ON(offset >= il->cfg->base_params->eeprom_size);
+	return &il->eeprom[offset];
+}
+EXPORT_SYMBOL(il_eeprom_query_addr);
+
+u16
+il_eeprom_query16(const struct il_priv *il, size_t offset)
+{
+	if (!il->eeprom)
+		return 0;
+	return (u16) il->eeprom[offset] | ((u16) il->eeprom[offset + 1] << 8);
+}
+EXPORT_SYMBOL(il_eeprom_query16);
+
+/**
+ * il_eeprom_init - read EEPROM contents
+ *
+ * Load the EEPROM contents from adapter into il->eeprom
+ *
+ * NOTE:  This routine uses the non-debug IO access functions.
+ */
+int
+il_eeprom_init(struct il_priv *il)
+{
+	__le16 *e;
+	u32 gp = _il_rd(il, CSR_EEPROM_GP);
+	int sz;
+	int ret;
+	u16 addr;
+
+	/* allocate eeprom */
+	sz = il->cfg->base_params->eeprom_size;
+	D_EEPROM("NVM size = %d\n", sz);
+	il->eeprom = kzalloc(sz, GFP_KERNEL);
+	if (!il->eeprom) {
+		ret = -ENOMEM;
+		goto alloc_err;
+	}
+	e = (__le16 *) il->eeprom;
+
+	il->cfg->ops->lib->apm_ops.init(il);
+
+	ret = il_eeprom_verify_signature(il);
+	if (ret < 0) {
+		IL_ERR("EEPROM not found, EEPROM_GP=0x%08x\n", gp);
+		ret = -ENOENT;
+		goto err;
+	}
+
+	/* Make sure driver (instead of uCode) is allowed to read EEPROM */
+	ret = il->cfg->ops->lib->eeprom_ops.acquire_semaphore(il);
+	if (ret < 0) {
+		IL_ERR("Failed to acquire EEPROM semaphore.\n");
+		ret = -ENOENT;
+		goto err;
+	}
+
+	/* eeprom is an array of 16bit values */
+	for (addr = 0; addr < sz; addr += sizeof(u16)) {
+		u32 r;
+
+		_il_wr(il, CSR_EEPROM_REG,
+		       CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
+
+		ret =
+		    _il_poll_bit(il, CSR_EEPROM_REG,
+				 CSR_EEPROM_REG_READ_VALID_MSK,
+				 CSR_EEPROM_REG_READ_VALID_MSK,
+				 IL_EEPROM_ACCESS_TIMEOUT);
+		if (ret < 0) {
+			IL_ERR("Time out reading EEPROM[%d]\n", addr);
+			goto done;
+		}
+		r = _il_rd(il, CSR_EEPROM_REG);
+		e[addr / 2] = cpu_to_le16(r >> 16);
+	}
+
+	D_EEPROM("NVM Type: %s, version: 0x%x\n", "EEPROM",
+		 il_eeprom_query16(il, EEPROM_VERSION));
+
+	ret = 0;
+done:
+	il->cfg->ops->lib->eeprom_ops.release_semaphore(il);
+
+err:
+	if (ret)
+		il_eeprom_free(il);
+	/* Reset chip to save power until we load uCode during "up". */
+	il_apm_stop(il);
+alloc_err:
+	return ret;
+}
+EXPORT_SYMBOL(il_eeprom_init);
+
+void
+il_eeprom_free(struct il_priv *il)
+{
+	kfree(il->eeprom);
+	il->eeprom = NULL;
+}
+EXPORT_SYMBOL(il_eeprom_free);
+
+static void
+il_init_band_reference(const struct il_priv *il, int eep_band,
+		       int *eeprom_ch_count,
+		       const struct il_eeprom_channel **eeprom_ch_info,
+		       const u8 **eeprom_ch_idx)
+{
+	u32 offset =
+	    il->cfg->ops->lib->eeprom_ops.regulatory_bands[eep_band - 1];
+	switch (eep_band) {
+	case 1:		/* 2.4GHz band */
+		*eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_1);
+		*eeprom_ch_info =
+		    (struct il_eeprom_channel *)il_eeprom_query_addr(il,
+								     offset);
+		*eeprom_ch_idx = il_eeprom_band_1;
+		break;
+	case 2:		/* 4.9GHz band */
+		*eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_2);
+		*eeprom_ch_info =
+		    (struct il_eeprom_channel *)il_eeprom_query_addr(il,
+								     offset);
+		*eeprom_ch_idx = il_eeprom_band_2;
+		break;
+	case 3:		/* 5.2GHz band */
+		*eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_3);
+		*eeprom_ch_info =
+		    (struct il_eeprom_channel *)il_eeprom_query_addr(il,
+								     offset);
+		*eeprom_ch_idx = il_eeprom_band_3;
+		break;
+	case 4:		/* 5.5GHz band */
+		*eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_4);
+		*eeprom_ch_info =
+		    (struct il_eeprom_channel *)il_eeprom_query_addr(il,
+								     offset);
+		*eeprom_ch_idx = il_eeprom_band_4;
+		break;
+	case 5:		/* 5.7GHz band */
+		*eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_5);
+		*eeprom_ch_info =
+		    (struct il_eeprom_channel *)il_eeprom_query_addr(il,
+								     offset);
+		*eeprom_ch_idx = il_eeprom_band_5;
+		break;
+	case 6:		/* 2.4GHz ht40 channels */
+		*eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_6);
+		*eeprom_ch_info =
+		    (struct il_eeprom_channel *)il_eeprom_query_addr(il,
+								     offset);
+		*eeprom_ch_idx = il_eeprom_band_6;
+		break;
+	case 7:		/* 5 GHz ht40 channels */
+		*eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_7);
+		*eeprom_ch_info =
+		    (struct il_eeprom_channel *)il_eeprom_query_addr(il,
+								     offset);
+		*eeprom_ch_idx = il_eeprom_band_7;
+		break;
+	default:
+		BUG();
+	}
+}
+
+#define CHECK_AND_PRINT(x) ((eeprom_ch->flags & EEPROM_CHANNEL_##x) \
+			    ? # x " " : "")
+/**
+ * il_mod_ht40_chan_info - Copy ht40 channel info into driver's il.
+ *
+ * Does not set up a command, or touch hardware.
+ */
+static int
+il_mod_ht40_chan_info(struct il_priv *il, enum ieee80211_band band, u16 channel,
+		      const struct il_eeprom_channel *eeprom_ch,
+		      u8 clear_ht40_extension_channel)
+{
+	struct il_channel_info *ch_info;
+
+	ch_info =
+	    (struct il_channel_info *)il_get_channel_info(il, band, channel);
+
+	if (!il_is_channel_valid(ch_info))
+		return -1;
+
+	D_EEPROM("HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):"
+		 " Ad-Hoc %ssupported\n", ch_info->channel,
+		 il_is_channel_a_band(ch_info) ? "5.2" : "2.4",
+		 CHECK_AND_PRINT(IBSS), CHECK_AND_PRINT(ACTIVE),
+		 CHECK_AND_PRINT(RADAR), CHECK_AND_PRINT(WIDE),
+		 CHECK_AND_PRINT(DFS), eeprom_ch->flags,
+		 eeprom_ch->max_power_avg,
+		 ((eeprom_ch->flags & EEPROM_CHANNEL_IBSS) &&
+		  !(eeprom_ch->flags & EEPROM_CHANNEL_RADAR)) ? "" : "not ");
+
+	ch_info->ht40_eeprom = *eeprom_ch;
+	ch_info->ht40_max_power_avg = eeprom_ch->max_power_avg;
+	ch_info->ht40_flags = eeprom_ch->flags;
+	if (eeprom_ch->flags & EEPROM_CHANNEL_VALID)
+		ch_info->ht40_extension_channel &=
+		    ~clear_ht40_extension_channel;
+
+	return 0;
+}
+
+#define CHECK_AND_PRINT_I(x) ((eeprom_ch_info[ch].flags & EEPROM_CHANNEL_##x) \
+			    ? # x " " : "")
+
+/**
+ * il_init_channel_map - Set up driver's info for all possible channels
+ */
+int
+il_init_channel_map(struct il_priv *il)
+{
+	int eeprom_ch_count = 0;
+	const u8 *eeprom_ch_idx = NULL;
+	const struct il_eeprom_channel *eeprom_ch_info = NULL;
+	int band, ch;
+	struct il_channel_info *ch_info;
+
+	if (il->channel_count) {
+		D_EEPROM("Channel map already initialized.\n");
+		return 0;
+	}
+
+	D_EEPROM("Initializing regulatory info from EEPROM\n");
+
+	il->channel_count =
+	    ARRAY_SIZE(il_eeprom_band_1) + ARRAY_SIZE(il_eeprom_band_2) +
+	    ARRAY_SIZE(il_eeprom_band_3) + ARRAY_SIZE(il_eeprom_band_4) +
+	    ARRAY_SIZE(il_eeprom_band_5);
+
+	D_EEPROM("Parsing data for %d channels.\n", il->channel_count);
+
+	il->channel_info =
+	    kzalloc(sizeof(struct il_channel_info) * il->channel_count,
+		    GFP_KERNEL);
+	if (!il->channel_info) {
+		IL_ERR("Could not allocate channel_info\n");
+		il->channel_count = 0;
+		return -ENOMEM;
+	}
+
+	ch_info = il->channel_info;
+
+	/* Loop through the 5 EEPROM bands adding them in order to the
+	 * channel map we maintain (that contains additional information than
+	 * what just in the EEPROM) */
+	for (band = 1; band <= 5; band++) {
+
+		il_init_band_reference(il, band, &eeprom_ch_count,
+				       &eeprom_ch_info, &eeprom_ch_idx);
+
+		/* Loop through each band adding each of the channels */
+		for (ch = 0; ch < eeprom_ch_count; ch++) {
+			ch_info->channel = eeprom_ch_idx[ch];
+			ch_info->band =
+			    (band ==
+			     1) ? IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
+
+			/* permanently store EEPROM's channel regulatory flags
+			 *   and max power in channel info database. */
+			ch_info->eeprom = eeprom_ch_info[ch];
+
+			/* Copy the run-time flags so they are there even on
+			 * invalid channels */
+			ch_info->flags = eeprom_ch_info[ch].flags;
+			/* First write that ht40 is not enabled, and then enable
+			 * one by one */
+			ch_info->ht40_extension_channel =
+			    IEEE80211_CHAN_NO_HT40;
+
+			if (!(il_is_channel_valid(ch_info))) {
+				D_EEPROM("Ch. %d Flags %x [%sGHz] - "
+					 "No traffic\n", ch_info->channel,
+					 ch_info->flags,
+					 il_is_channel_a_band(ch_info) ? "5.2" :
+					 "2.4");
+				ch_info++;
+				continue;
+			}
+
+			/* Initialize regulatory-based run-time data */
+			ch_info->max_power_avg = ch_info->curr_txpow =
+			    eeprom_ch_info[ch].max_power_avg;
+			ch_info->scan_power = eeprom_ch_info[ch].max_power_avg;
+			ch_info->min_power = 0;
+
+			D_EEPROM("Ch. %d [%sGHz] " "%s%s%s%s%s%s(0x%02x %ddBm):"
+				 " Ad-Hoc %ssupported\n", ch_info->channel,
+				 il_is_channel_a_band(ch_info) ? "5.2" : "2.4",
+				 CHECK_AND_PRINT_I(VALID),
+				 CHECK_AND_PRINT_I(IBSS),
+				 CHECK_AND_PRINT_I(ACTIVE),
+				 CHECK_AND_PRINT_I(RADAR),
+				 CHECK_AND_PRINT_I(WIDE),
+				 CHECK_AND_PRINT_I(DFS),
+				 eeprom_ch_info[ch].flags,
+				 eeprom_ch_info[ch].max_power_avg,
+				 ((eeprom_ch_info[ch].
+				   flags & EEPROM_CHANNEL_IBSS) &&
+				  !(eeprom_ch_info[ch].
+				    flags & EEPROM_CHANNEL_RADAR)) ? "" :
+				 "not ");
+
+			ch_info++;
+		}
+	}
+
+	/* Check if we do have HT40 channels */
+	if (il->cfg->ops->lib->eeprom_ops.regulatory_bands[5] ==
+	    EEPROM_REGULATORY_BAND_NO_HT40 &&
+	    il->cfg->ops->lib->eeprom_ops.regulatory_bands[6] ==
+	    EEPROM_REGULATORY_BAND_NO_HT40)
+		return 0;
+
+	/* Two additional EEPROM bands for 2.4 and 5 GHz HT40 channels */
+	for (band = 6; band <= 7; band++) {
+		enum ieee80211_band ieeeband;
+
+		il_init_band_reference(il, band, &eeprom_ch_count,
+				       &eeprom_ch_info, &eeprom_ch_idx);
+
+		/* EEPROM band 6 is 2.4, band 7 is 5 GHz */
+		ieeeband =
+		    (band == 6) ? IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
+
+		/* Loop through each band adding each of the channels */
+		for (ch = 0; ch < eeprom_ch_count; ch++) {
+			/* Set up driver's info for lower half */
+			il_mod_ht40_chan_info(il, ieeeband, eeprom_ch_idx[ch],
+					      &eeprom_ch_info[ch],
+					      IEEE80211_CHAN_NO_HT40PLUS);
+
+			/* Set up driver's info for upper half */
+			il_mod_ht40_chan_info(il, ieeeband,
+					      eeprom_ch_idx[ch] + 4,
+					      &eeprom_ch_info[ch],
+					      IEEE80211_CHAN_NO_HT40MINUS);
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(il_init_channel_map);
+
+/*
+ * il_free_channel_map - undo allocations in il_init_channel_map
+ */
+void
+il_free_channel_map(struct il_priv *il)
+{
+	kfree(il->channel_info);
+	il->channel_count = 0;
+}
+EXPORT_SYMBOL(il_free_channel_map);
+
+/**
+ * il_get_channel_info - Find driver's ilate channel info
+ *
+ * Based on band and channel number.
+ */
+const struct il_channel_info *
+il_get_channel_info(const struct il_priv *il, enum ieee80211_band band,
+		    u16 channel)
+{
+	int i;
+
+	switch (band) {
+	case IEEE80211_BAND_5GHZ:
+		for (i = 14; i < il->channel_count; i++) {
+			if (il->channel_info[i].channel == channel)
+				return &il->channel_info[i];
+		}
+		break;
+	case IEEE80211_BAND_2GHZ:
+		if (channel >= 1 && channel <= 14)
+			return &il->channel_info[channel - 1];
+		break;
+	default:
+		BUG();
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL(il_get_channel_info);
+
+/*
+ * Setting power level allows the card to go to sleep when not busy.
+ *
+ * We calculate a sleep command based on the required latency, which
+ * we get from mac80211. In order to handle thermal throttling, we can
+ * also use pre-defined power levels.
+ */
+
+/*
+ * This defines the old power levels. They are still used by default
+ * (level 1) and for thermal throttle (levels 3 through 5)
+ */
+
+struct il_power_vec_entry {
+	struct il_powertable_cmd cmd;
+	u8 no_dtim;		/* number of skip dtim */
+};
+
+static void
+il_power_sleep_cam_cmd(struct il_priv *il, struct il_powertable_cmd *cmd)
+{
+	memset(cmd, 0, sizeof(*cmd));
+
+	if (il->power_data.pci_pm)
+		cmd->flags |= IL_POWER_PCI_PM_MSK;
+
+	D_POWER("Sleep command for CAM\n");
+}
+
+static int
+il_set_power(struct il_priv *il, struct il_powertable_cmd *cmd)
+{
+	D_POWER("Sending power/sleep command\n");
+	D_POWER("Flags value = 0x%08X\n", cmd->flags);
+	D_POWER("Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout));
+	D_POWER("Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout));
+	D_POWER("Sleep interval vector = { %d , %d , %d , %d , %d }\n",
+		le32_to_cpu(cmd->sleep_interval[0]),
+		le32_to_cpu(cmd->sleep_interval[1]),
+		le32_to_cpu(cmd->sleep_interval[2]),
+		le32_to_cpu(cmd->sleep_interval[3]),
+		le32_to_cpu(cmd->sleep_interval[4]));
+
+	return il_send_cmd_pdu(il, C_POWER_TBL,
+			       sizeof(struct il_powertable_cmd), cmd);
+}
+
+int
+il_power_set_mode(struct il_priv *il, struct il_powertable_cmd *cmd, bool force)
+{
+	int ret;
+	bool update_chains;
+
+	lockdep_assert_held(&il->mutex);
+
+	/* Don't update the RX chain when chain noise calibration is running */
+	update_chains = il->chain_noise_data.state == IL_CHAIN_NOISE_DONE ||
+	    il->chain_noise_data.state == IL_CHAIN_NOISE_ALIVE;
+
+	if (!memcmp(&il->power_data.sleep_cmd, cmd, sizeof(*cmd)) && !force)
+		return 0;
+
+	if (!il_is_ready_rf(il))
+		return -EIO;
+
+	/* scan complete use sleep_power_next, need to be updated */
+	memcpy(&il->power_data.sleep_cmd_next, cmd, sizeof(*cmd));
+	if (test_bit(S_SCANNING, &il->status) && !force) {
+		D_INFO("Defer power set mode while scanning\n");
+		return 0;
+	}
+
+	if (cmd->flags & IL_POWER_DRIVER_ALLOW_SLEEP_MSK)
+		set_bit(S_POWER_PMI, &il->status);
+
+	ret = il_set_power(il, cmd);
+	if (!ret) {
+		if (!(cmd->flags & IL_POWER_DRIVER_ALLOW_SLEEP_MSK))
+			clear_bit(S_POWER_PMI, &il->status);
+
+		if (il->cfg->ops->lib->update_chain_flags && update_chains)
+			il->cfg->ops->lib->update_chain_flags(il);
+		else if (il->cfg->ops->lib->update_chain_flags)
+			D_POWER("Cannot update the power, chain noise "
+				"calibration running: %d\n",
+				il->chain_noise_data.state);
+
+		memcpy(&il->power_data.sleep_cmd, cmd, sizeof(*cmd));
+	} else
+		IL_ERR("set power fail, ret = %d", ret);
+
+	return ret;
+}
+
+int
+il_power_update_mode(struct il_priv *il, bool force)
+{
+	struct il_powertable_cmd cmd;
+
+	il_power_sleep_cam_cmd(il, &cmd);
+	return il_power_set_mode(il, &cmd, force);
+}
+EXPORT_SYMBOL(il_power_update_mode);
+
+/* initialize to default */
+void
+il_power_initialize(struct il_priv *il)
+{
+	u16 lctl = il_pcie_link_ctl(il);
+
+	il->power_data.pci_pm = !(lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN);
+
+	il->power_data.debug_sleep_level_override = -1;
+
+	memset(&il->power_data.sleep_cmd, 0, sizeof(il->power_data.sleep_cmd));
+}
+EXPORT_SYMBOL(il_power_initialize);
+
+/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
+ * sending probe req.  This should be set long enough to hear probe responses
+ * from more than one AP.  */
+#define IL_ACTIVE_DWELL_TIME_24    (30)	/* all times in msec */
+#define IL_ACTIVE_DWELL_TIME_52    (20)
+
+#define IL_ACTIVE_DWELL_FACTOR_24GHZ (3)
+#define IL_ACTIVE_DWELL_FACTOR_52GHZ (2)
+
+/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
+ * Must be set longer than active dwell time.
+ * For the most reliable scan, set > AP beacon interval (typically 100msec). */
+#define IL_PASSIVE_DWELL_TIME_24   (20)	/* all times in msec */
+#define IL_PASSIVE_DWELL_TIME_52   (10)
+#define IL_PASSIVE_DWELL_BASE      (100)
+#define IL_CHANNEL_TUNE_TIME       5
+
+static int
+il_send_scan_abort(struct il_priv *il)
+{
+	int ret;
+	struct il_rx_pkt *pkt;
+	struct il_host_cmd cmd = {
+		.id = C_SCAN_ABORT,
+		.flags = CMD_WANT_SKB,
+	};
+
+	/* Exit instantly with error when device is not ready
+	 * to receive scan abort command or it does not perform
+	 * hardware scan currently */
+	if (!test_bit(S_READY, &il->status) ||
+	    !test_bit(S_GEO_CONFIGURED, &il->status) ||
+	    !test_bit(S_SCAN_HW, &il->status) ||
+	    test_bit(S_FW_ERROR, &il->status) ||
+	    test_bit(S_EXIT_PENDING, &il->status))
+		return -EIO;
+
+	ret = il_send_cmd_sync(il, &cmd);
+	if (ret)
+		return ret;
+
+	pkt = (struct il_rx_pkt *)cmd.reply_page;
+	if (pkt->u.status != CAN_ABORT_STATUS) {
+		/* The scan abort will return 1 for success or
+		 * 2 for "failure".  A failure condition can be
+		 * due to simply not being in an active scan which
+		 * can occur if we send the scan abort before we
+		 * the microcode has notified us that a scan is
+		 * completed. */
+		D_SCAN("SCAN_ABORT ret %d.\n", pkt->u.status);
+		ret = -EIO;
+	}
+
+	il_free_pages(il, cmd.reply_page);
+	return ret;
+}
+
+static void
+il_complete_scan(struct il_priv *il, bool aborted)
+{
+	/* check if scan was requested from mac80211 */
+	if (il->scan_request) {
+		D_SCAN("Complete scan in mac80211\n");
+		ieee80211_scan_completed(il->hw, aborted);
+	}
+
+	il->scan_vif = NULL;
+	il->scan_request = NULL;
+}
+
+void
+il_force_scan_end(struct il_priv *il)
+{
+	lockdep_assert_held(&il->mutex);
+
+	if (!test_bit(S_SCANNING, &il->status)) {
+		D_SCAN("Forcing scan end while not scanning\n");
+		return;
+	}
+
+	D_SCAN("Forcing scan end\n");
+	clear_bit(S_SCANNING, &il->status);
+	clear_bit(S_SCAN_HW, &il->status);
+	clear_bit(S_SCAN_ABORTING, &il->status);
+	il_complete_scan(il, true);
+}
+
+static void
+il_do_scan_abort(struct il_priv *il)
+{
+	int ret;
+
+	lockdep_assert_held(&il->mutex);
+
+	if (!test_bit(S_SCANNING, &il->status)) {
+		D_SCAN("Not performing scan to abort\n");
+		return;
+	}
+
+	if (test_and_set_bit(S_SCAN_ABORTING, &il->status)) {
+		D_SCAN("Scan abort in progress\n");
+		return;
+	}
+
+	ret = il_send_scan_abort(il);
+	if (ret) {
+		D_SCAN("Send scan abort failed %d\n", ret);
+		il_force_scan_end(il);
+	} else
+		D_SCAN("Successfully send scan abort\n");
+}
+
+/**
+ * il_scan_cancel - Cancel any currently executing HW scan
+ */
+int
+il_scan_cancel(struct il_priv *il)
+{
+	D_SCAN("Queuing abort scan\n");
+	queue_work(il->workqueue, &il->abort_scan);
+	return 0;
+}
+EXPORT_SYMBOL(il_scan_cancel);
+
+/**
+ * il_scan_cancel_timeout - Cancel any currently executing HW scan
+ * @ms: amount of time to wait (in milliseconds) for scan to abort
+ *
+ */
+int
+il_scan_cancel_timeout(struct il_priv *il, unsigned long ms)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(ms);
+
+	lockdep_assert_held(&il->mutex);
+
+	D_SCAN("Scan cancel timeout\n");
+
+	il_do_scan_abort(il);
+
+	while (time_before_eq(jiffies, timeout)) {
+		if (!test_bit(S_SCAN_HW, &il->status))
+			break;
+		msleep(20);
+	}
+
+	return test_bit(S_SCAN_HW, &il->status);
+}
+EXPORT_SYMBOL(il_scan_cancel_timeout);
+
+/* Service response to C_SCAN (0x80) */
+static void
+il_hdl_scan(struct il_priv *il, struct il_rx_buf *rxb)
+{
+#ifdef CONFIG_IWLEGACY_DEBUG
+	struct il_rx_pkt *pkt = rxb_addr(rxb);
+	struct il_scanreq_notification *notif =
+	    (struct il_scanreq_notification *)pkt->u.raw;
+
+	D_SCAN("Scan request status = 0x%x\n", notif->status);
+#endif
+}
+
+/* Service N_SCAN_START (0x82) */
+static void
+il_hdl_scan_start(struct il_priv *il, struct il_rx_buf *rxb)
+{
+	struct il_rx_pkt *pkt = rxb_addr(rxb);
+	struct il_scanstart_notification *notif =
+	    (struct il_scanstart_notification *)pkt->u.raw;
+	il->scan_start_tsf = le32_to_cpu(notif->tsf_low);
+	D_SCAN("Scan start: " "%d [802.11%s] "
+	       "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n", notif->channel,
+	       notif->band ? "bg" : "a", le32_to_cpu(notif->tsf_high),
+	       le32_to_cpu(notif->tsf_low), notif->status, notif->beacon_timer);
+}
+
+/* Service N_SCAN_RESULTS (0x83) */
+static void
+il_hdl_scan_results(struct il_priv *il, struct il_rx_buf *rxb)
+{
+#ifdef CONFIG_IWLEGACY_DEBUG
+	struct il_rx_pkt *pkt = rxb_addr(rxb);
+	struct il_scanresults_notification *notif =
+	    (struct il_scanresults_notification *)pkt->u.raw;
+
+	D_SCAN("Scan ch.res: " "%d [802.11%s] " "(TSF: 0x%08X:%08X) - %d "
+	       "elapsed=%lu usec\n", notif->channel, notif->band ? "bg" : "a",
+	       le32_to_cpu(notif->tsf_high), le32_to_cpu(notif->tsf_low),
+	       le32_to_cpu(notif->stats[0]),
+	       le32_to_cpu(notif->tsf_low) - il->scan_start_tsf);
+#endif
+}
+
+/* Service N_SCAN_COMPLETE (0x84) */
+static void
+il_hdl_scan_complete(struct il_priv *il, struct il_rx_buf *rxb)
+{
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+	struct il_rx_pkt *pkt = rxb_addr(rxb);
+	struct il_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
+#endif
+
+	D_SCAN("Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
+	       scan_notif->scanned_channels, scan_notif->tsf_low,
+	       scan_notif->tsf_high, scan_notif->status);
+
+	/* The HW is no longer scanning */
+	clear_bit(S_SCAN_HW, &il->status);
+
+	D_SCAN("Scan on %sGHz took %dms\n",
+	       (il->scan_band == IEEE80211_BAND_2GHZ) ? "2.4" : "5.2",
+	       jiffies_to_msecs(jiffies - il->scan_start));
+
+	queue_work(il->workqueue, &il->scan_completed);
+}
+
+void
+il_setup_rx_scan_handlers(struct il_priv *il)
+{
+	/* scan handlers */
+	il->handlers[C_SCAN] = il_hdl_scan;
+	il->handlers[N_SCAN_START] = il_hdl_scan_start;
+	il->handlers[N_SCAN_RESULTS] = il_hdl_scan_results;
+	il->handlers[N_SCAN_COMPLETE] = il_hdl_scan_complete;
+}
+EXPORT_SYMBOL(il_setup_rx_scan_handlers);
+
+inline u16
+il_get_active_dwell_time(struct il_priv *il, enum ieee80211_band band,
+			 u8 n_probes)
+{
+	if (band == IEEE80211_BAND_5GHZ)
+		return IL_ACTIVE_DWELL_TIME_52 +
+		    IL_ACTIVE_DWELL_FACTOR_52GHZ * (n_probes + 1);
+	else
+		return IL_ACTIVE_DWELL_TIME_24 +
+		    IL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1);
+}
+EXPORT_SYMBOL(il_get_active_dwell_time);
+
+u16
+il_get_passive_dwell_time(struct il_priv *il, enum ieee80211_band band,
+			  struct ieee80211_vif *vif)
+{
+	struct il_rxon_context *ctx = &il->ctx;
+	u16 value;
+
+	u16 passive =
+	    (band ==
+	     IEEE80211_BAND_2GHZ) ? IL_PASSIVE_DWELL_BASE +
+	    IL_PASSIVE_DWELL_TIME_24 : IL_PASSIVE_DWELL_BASE +
+	    IL_PASSIVE_DWELL_TIME_52;
+
+	if (il_is_any_associated(il)) {
+		/*
+		 * If we're associated, we clamp the maximum passive
+		 * dwell time to be 98% of the smallest beacon interval
+		 * (minus 2 * channel tune time)
+		 */
+		value = ctx->vif ? ctx->vif->bss_conf.beacon_int : 0;
+		if (value > IL_PASSIVE_DWELL_BASE || !value)
+			value = IL_PASSIVE_DWELL_BASE;
+		value = (value * 98) / 100 - IL_CHANNEL_TUNE_TIME * 2;
+		passive = min(value, passive);
+	}
+
+	return passive;
+}
+EXPORT_SYMBOL(il_get_passive_dwell_time);
+
+void
+il_init_scan_params(struct il_priv *il)
+{
+	u8 ant_idx = fls(il->hw_params.valid_tx_ant) - 1;
+	if (!il->scan_tx_ant[IEEE80211_BAND_5GHZ])
+		il->scan_tx_ant[IEEE80211_BAND_5GHZ] = ant_idx;
+	if (!il->scan_tx_ant[IEEE80211_BAND_2GHZ])
+		il->scan_tx_ant[IEEE80211_BAND_2GHZ] = ant_idx;
+}
+EXPORT_SYMBOL(il_init_scan_params);
+
+static int
+il_scan_initiate(struct il_priv *il, struct ieee80211_vif *vif)
+{
+	int ret;
+
+	lockdep_assert_held(&il->mutex);
+
+	if (WARN_ON(!il->cfg->ops->utils->request_scan))
+		return -EOPNOTSUPP;
+
+	cancel_delayed_work(&il->scan_check);
+
+	if (!il_is_ready_rf(il)) {
+		IL_WARN("Request scan called when driver not ready.\n");
+		return -EIO;
+	}
+
+	if (test_bit(S_SCAN_HW, &il->status)) {
+		D_SCAN("Multiple concurrent scan requests in parallel.\n");
+		return -EBUSY;
+	}
+
+	if (test_bit(S_SCAN_ABORTING, &il->status)) {
+		D_SCAN("Scan request while abort pending.\n");
+		return -EBUSY;
+	}
+
+	D_SCAN("Starting scan...\n");
+
+	set_bit(S_SCANNING, &il->status);
+	il->scan_start = jiffies;
+
+	ret = il->cfg->ops->utils->request_scan(il, vif);
+	if (ret) {
+		clear_bit(S_SCANNING, &il->status);
+		return ret;
+	}
+
+	queue_delayed_work(il->workqueue, &il->scan_check,
+			   IL_SCAN_CHECK_WATCHDOG);
+
+	return 0;
+}
+
+int
+il_mac_hw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+	       struct cfg80211_scan_request *req)
+{
+	struct il_priv *il = hw->priv;
+	int ret;
+
+	D_MAC80211("enter\n");
+
+	if (req->n_channels == 0)
+		return -EINVAL;
+
+	mutex_lock(&il->mutex);
+
+	if (test_bit(S_SCANNING, &il->status)) {
+		D_SCAN("Scan already in progress.\n");
+		ret = -EAGAIN;
+		goto out_unlock;
+	}
+
+	/* mac80211 will only ask for one band at a time */
+	il->scan_request = req;
+	il->scan_vif = vif;
+	il->scan_band = req->channels[0]->band;
+
+	ret = il_scan_initiate(il, vif);
+
+	D_MAC80211("leave\n");
+
+out_unlock:
+	mutex_unlock(&il->mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL(il_mac_hw_scan);
+
+static void
+il_bg_scan_check(struct work_struct *data)
+{
+	struct il_priv *il =
+	    container_of(data, struct il_priv, scan_check.work);
+
+	D_SCAN("Scan check work\n");
+
+	/* Since we are here firmware does not finish scan and
+	 * most likely is in bad shape, so we don't bother to
+	 * send abort command, just force scan complete to mac80211 */
+	mutex_lock(&il->mutex);
+	il_force_scan_end(il);
+	mutex_unlock(&il->mutex);
+}
+
+/**
+ * il_fill_probe_req - fill in all required fields and IE for probe request
+ */
+
+u16
+il_fill_probe_req(struct il_priv *il, struct ieee80211_mgmt *frame,
+		  const u8 *ta, const u8 *ies, int ie_len, int left)
+{
+	int len = 0;
+	u8 *pos = NULL;
+
+	/* Make sure there is enough space for the probe request,
+	 * two mandatory IEs and the data */
+	left -= 24;
+	if (left < 0)
+		return 0;
+
+	frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
+	memcpy(frame->da, il_bcast_addr, ETH_ALEN);
+	memcpy(frame->sa, ta, ETH_ALEN);
+	memcpy(frame->bssid, il_bcast_addr, ETH_ALEN);
+	frame->seq_ctrl = 0;
+
+	len += 24;
+
+	/* ...next IE... */
+	pos = &frame->u.probe_req.variable[0];
+
+	/* fill in our indirect SSID IE */
+	left -= 2;
+	if (left < 0)
+		return 0;
+	*pos++ = WLAN_EID_SSID;
+	*pos++ = 0;
+
+	len += 2;
+
+	if (WARN_ON(left < ie_len))
+		return len;
+
+	if (ies && ie_len) {
+		memcpy(pos, ies, ie_len);
+		len += ie_len;
+	}
+
+	return (u16) len;
+}
+EXPORT_SYMBOL(il_fill_probe_req);
+
+static void
+il_bg_abort_scan(struct work_struct *work)
+{
+	struct il_priv *il = container_of(work, struct il_priv, abort_scan);
+
+	D_SCAN("Abort scan work\n");
+
+	/* We keep scan_check work queued in case when firmware will not
+	 * report back scan completed notification */
+	mutex_lock(&il->mutex);
+	il_scan_cancel_timeout(il, 200);
+	mutex_unlock(&il->mutex);
+}
+
+static void
+il_bg_scan_completed(struct work_struct *work)
+{
+	struct il_priv *il = container_of(work, struct il_priv, scan_completed);
+	bool aborted;
+
+	D_SCAN("Completed scan.\n");
+
+	cancel_delayed_work(&il->scan_check);
+
+	mutex_lock(&il->mutex);
+
+	aborted = test_and_clear_bit(S_SCAN_ABORTING, &il->status);
+	if (aborted)
+		D_SCAN("Aborted scan completed.\n");
+
+	if (!test_and_clear_bit(S_SCANNING, &il->status)) {
+		D_SCAN("Scan already completed.\n");
+		goto out_settings;
+	}
+
+	il_complete_scan(il, aborted);
+
+out_settings:
+	/* Can we still talk to firmware ? */
+	if (!il_is_ready_rf(il))
+		goto out;
+
+	/*
+	 * We do not commit power settings while scan is pending,
+	 * do it now if the settings changed.
+	 */
+	il_power_set_mode(il, &il->power_data.sleep_cmd_next, false);
+	il_set_tx_power(il, il->tx_power_next, false);
+
+	il->cfg->ops->utils->post_scan(il);
+
+out:
+	mutex_unlock(&il->mutex);
+}
+
+void
+il_setup_scan_deferred_work(struct il_priv *il)
+{
+	INIT_WORK(&il->scan_completed, il_bg_scan_completed);
+	INIT_WORK(&il->abort_scan, il_bg_abort_scan);
+	INIT_DELAYED_WORK(&il->scan_check, il_bg_scan_check);
+}
+EXPORT_SYMBOL(il_setup_scan_deferred_work);
+
+void
+il_cancel_scan_deferred_work(struct il_priv *il)
+{
+	cancel_work_sync(&il->abort_scan);
+	cancel_work_sync(&il->scan_completed);
+
+	if (cancel_delayed_work_sync(&il->scan_check)) {
+		mutex_lock(&il->mutex);
+		il_force_scan_end(il);
+		mutex_unlock(&il->mutex);
+	}
+}
+EXPORT_SYMBOL(il_cancel_scan_deferred_work);
+
+/* il->sta_lock must be held */
+static void
+il_sta_ucode_activate(struct il_priv *il, u8 sta_id)
+{
+
+	if (!(il->stations[sta_id].used & IL_STA_DRIVER_ACTIVE))
+		IL_ERR("ACTIVATE a non DRIVER active station id %u addr %pM\n",
+		       sta_id, il->stations[sta_id].sta.sta.addr);
+
+	if (il->stations[sta_id].used & IL_STA_UCODE_ACTIVE) {
+		D_ASSOC("STA id %u addr %pM already present"
+			" in uCode (according to driver)\n", sta_id,
+			il->stations[sta_id].sta.sta.addr);
+	} else {
+		il->stations[sta_id].used |= IL_STA_UCODE_ACTIVE;
+		D_ASSOC("Added STA id %u addr %pM to uCode\n", sta_id,
+			il->stations[sta_id].sta.sta.addr);
+	}
+}
+
+static int
+il_process_add_sta_resp(struct il_priv *il, struct il_addsta_cmd *addsta,
+			struct il_rx_pkt *pkt, bool sync)
+{
+	u8 sta_id = addsta->sta.sta_id;
+	unsigned long flags;
+	int ret = -EIO;
+
+	if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
+		IL_ERR("Bad return from C_ADD_STA (0x%08X)\n", pkt->hdr.flags);
+		return ret;
+	}
+
+	D_INFO("Processing response for adding station %u\n", sta_id);
+
+	spin_lock_irqsave(&il->sta_lock, flags);
+
+	switch (pkt->u.add_sta.status) {
+	case ADD_STA_SUCCESS_MSK:
+		D_INFO("C_ADD_STA PASSED\n");
+		il_sta_ucode_activate(il, sta_id);
+		ret = 0;
+		break;
+	case ADD_STA_NO_ROOM_IN_TBL:
+		IL_ERR("Adding station %d failed, no room in table.\n", sta_id);
+		break;
+	case ADD_STA_NO_BLOCK_ACK_RESOURCE:
+		IL_ERR("Adding station %d failed, no block ack resource.\n",
+		       sta_id);
+		break;
+	case ADD_STA_MODIFY_NON_EXIST_STA:
+		IL_ERR("Attempting to modify non-existing station %d\n",
+		       sta_id);
+		break;
+	default:
+		D_ASSOC("Received C_ADD_STA:(0x%08X)\n", pkt->u.add_sta.status);
+		break;
+	}
+
+	D_INFO("%s station id %u addr %pM\n",
+	       il->stations[sta_id].sta.mode ==
+	       STA_CONTROL_MODIFY_MSK ? "Modified" : "Added", sta_id,
+	       il->stations[sta_id].sta.sta.addr);
+
+	/*
+	 * XXX: The MAC address in the command buffer is often changed from
+	 * the original sent to the device. That is, the MAC address
+	 * written to the command buffer often is not the same MAC address
+	 * read from the command buffer when the command returns. This
+	 * issue has not yet been resolved and this debugging is left to
+	 * observe the problem.
+	 */
+	D_INFO("%s station according to cmd buffer %pM\n",
+	       il->stations[sta_id].sta.mode ==
+	       STA_CONTROL_MODIFY_MSK ? "Modified" : "Added", addsta->sta.addr);
+	spin_unlock_irqrestore(&il->sta_lock, flags);
+
+	return ret;
+}
+
+static void
+il_add_sta_callback(struct il_priv *il, struct il_device_cmd *cmd,
+		    struct il_rx_pkt *pkt)
+{
+	struct il_addsta_cmd *addsta = (struct il_addsta_cmd *)cmd->cmd.payload;
+
+	il_process_add_sta_resp(il, addsta, pkt, false);
+
+}
+
+int
+il_send_add_sta(struct il_priv *il, struct il_addsta_cmd *sta, u8 flags)
+{
+	struct il_rx_pkt *pkt = NULL;
+	int ret = 0;
+	u8 data[sizeof(*sta)];
+	struct il_host_cmd cmd = {
+		.id = C_ADD_STA,
+		.flags = flags,
+		.data = data,
+	};
+	u8 sta_id __maybe_unused = sta->sta.sta_id;
+
+	D_INFO("Adding sta %u (%pM) %ssynchronously\n", sta_id, sta->sta.addr,
+	       flags & CMD_ASYNC ? "a" : "");
+
+	if (flags & CMD_ASYNC)
+		cmd.callback = il_add_sta_callback;
+	else {
+		cmd.flags |= CMD_WANT_SKB;
+		might_sleep();
+	}
+
+	cmd.len = il->cfg->ops->utils->build_addsta_hcmd(sta, data);
+	ret = il_send_cmd(il, &cmd);
+
+	if (ret || (flags & CMD_ASYNC))
+		return ret;
+
+	if (ret == 0) {
+		pkt = (struct il_rx_pkt *)cmd.reply_page;
+		ret = il_process_add_sta_resp(il, sta, pkt, true);
+	}
+	il_free_pages(il, cmd.reply_page);
+
+	return ret;
+}
+EXPORT_SYMBOL(il_send_add_sta);
+
+static void
+il_set_ht_add_station(struct il_priv *il, u8 idx, struct ieee80211_sta *sta,
+		      struct il_rxon_context *ctx)
+{
+	struct ieee80211_sta_ht_cap *sta_ht_inf = &sta->ht_cap;
+	__le32 sta_flags;
+	u8 mimo_ps_mode;
+
+	if (!sta || !sta_ht_inf->ht_supported)
+		goto done;
+
+	mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_SM_PS) >> 2;
+	D_ASSOC("spatial multiplexing power save mode: %s\n",
+		(mimo_ps_mode == WLAN_HT_CAP_SM_PS_STATIC) ? "static" :
+		(mimo_ps_mode == WLAN_HT_CAP_SM_PS_DYNAMIC) ? "dynamic" :
+		"disabled");
+
+	sta_flags = il->stations[idx].sta.station_flags;
+
+	sta_flags &= ~(STA_FLG_RTS_MIMO_PROT_MSK | STA_FLG_MIMO_DIS_MSK);
+
+	switch (mimo_ps_mode) {
+	case WLAN_HT_CAP_SM_PS_STATIC:
+		sta_flags |= STA_FLG_MIMO_DIS_MSK;
+		break;
+	case WLAN_HT_CAP_SM_PS_DYNAMIC:
+		sta_flags |= STA_FLG_RTS_MIMO_PROT_MSK;
+		break;
+	case WLAN_HT_CAP_SM_PS_DISABLED:
+		break;
+	default:
+		IL_WARN("Invalid MIMO PS mode %d\n", mimo_ps_mode);
+		break;
+	}
+
+	sta_flags |=
+	    cpu_to_le32((u32) sta_ht_inf->
+			ampdu_factor << STA_FLG_MAX_AGG_SIZE_POS);
+
+	sta_flags |=
+	    cpu_to_le32((u32) sta_ht_inf->
+			ampdu_density << STA_FLG_AGG_MPDU_DENSITY_POS);
+
+	if (il_is_ht40_tx_allowed(il, ctx, &sta->ht_cap))
+		sta_flags |= STA_FLG_HT40_EN_MSK;
+	else
+		sta_flags &= ~STA_FLG_HT40_EN_MSK;
+
+	il->stations[idx].sta.station_flags = sta_flags;
+done:
+	return;
+}
+
+/**
+ * il_prep_station - Prepare station information for addition
+ *
+ * should be called with sta_lock held
+ */
+u8
+il_prep_station(struct il_priv *il, struct il_rxon_context *ctx,
+		const u8 *addr, bool is_ap, struct ieee80211_sta *sta)
+{
+	struct il_station_entry *station;
+	int i;
+	u8 sta_id = IL_INVALID_STATION;
+	u16 rate;
+
+	if (is_ap)
+		sta_id = ctx->ap_sta_id;
+	else if (is_broadcast_ether_addr(addr))
+		sta_id = ctx->bcast_sta_id;
+	else
+		for (i = IL_STA_ID; i < il->hw_params.max_stations; i++) {
+			if (!compare_ether_addr
+			    (il->stations[i].sta.sta.addr, addr)) {
+				sta_id = i;
+				break;
+			}
+
+			if (!il->stations[i].used &&
+			    sta_id == IL_INVALID_STATION)
+				sta_id = i;
+		}
+
+	/*
+	 * These two conditions have the same outcome, but keep them
+	 * separate
+	 */
+	if (unlikely(sta_id == IL_INVALID_STATION))
+		return sta_id;
+
+	/*
+	 * uCode is not able to deal with multiple requests to add a
+	 * station. Keep track if one is in progress so that we do not send
+	 * another.
+	 */
+	if (il->stations[sta_id].used & IL_STA_UCODE_INPROGRESS) {
+		D_INFO("STA %d already in process of being added.\n", sta_id);
+		return sta_id;
+	}
+
+	if ((il->stations[sta_id].used & IL_STA_DRIVER_ACTIVE) &&
+	    (il->stations[sta_id].used & IL_STA_UCODE_ACTIVE) &&
+	    !compare_ether_addr(il->stations[sta_id].sta.sta.addr, addr)) {
+		D_ASSOC("STA %d (%pM) already added, not adding again.\n",
+			sta_id, addr);
+		return sta_id;
+	}
+
+	station = &il->stations[sta_id];
+	station->used = IL_STA_DRIVER_ACTIVE;
+	D_ASSOC("Add STA to driver ID %d: %pM\n", sta_id, addr);
+	il->num_stations++;
+
+	/* Set up the C_ADD_STA command to send to device */
+	memset(&station->sta, 0, sizeof(struct il_addsta_cmd));
+	memcpy(station->sta.sta.addr, addr, ETH_ALEN);
+	station->sta.mode = 0;
+	station->sta.sta.sta_id = sta_id;
+	station->sta.station_flags = ctx->station_flags;
+	station->ctxid = ctx->ctxid;
+
+	if (sta) {
+		struct il_station_priv_common *sta_priv;
+
+		sta_priv = (void *)sta->drv_priv;
+		sta_priv->ctx = ctx;
+	}
+
+	/*
+	 * OK to call unconditionally, since local stations (IBSS BSSID
+	 * STA and broadcast STA) pass in a NULL sta, and mac80211
+	 * doesn't allow HT IBSS.
+	 */
+	il_set_ht_add_station(il, sta_id, sta, ctx);
+
+	/* 3945 only */
+	rate = (il->band == IEEE80211_BAND_5GHZ) ? RATE_6M_PLCP : RATE_1M_PLCP;
+	/* Turn on both antennas for the station... */
+	station->sta.rate_n_flags = cpu_to_le16(rate | RATE_MCS_ANT_AB_MSK);
+
+	return sta_id;
+
+}
+EXPORT_SYMBOL_GPL(il_prep_station);
+
+#define STA_WAIT_TIMEOUT (HZ/2)
+
+/**
+ * il_add_station_common -
+ */
+int
+il_add_station_common(struct il_priv *il, struct il_rxon_context *ctx,
+		      const u8 *addr, bool is_ap, struct ieee80211_sta *sta,
+		      u8 *sta_id_r)
+{
+	unsigned long flags_spin;
+	int ret = 0;
+	u8 sta_id;
+	struct il_addsta_cmd sta_cmd;
+
+	*sta_id_r = 0;
+	spin_lock_irqsave(&il->sta_lock, flags_spin);
+	sta_id = il_prep_station(il, ctx, addr, is_ap, sta);
+	if (sta_id == IL_INVALID_STATION) {
+		IL_ERR("Unable to prepare station %pM for addition\n", addr);
+		spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+		return -EINVAL;
+	}
+
+	/*
+	 * uCode is not able to deal with multiple requests to add a
+	 * station. Keep track if one is in progress so that we do not send
+	 * another.
+	 */
+	if (il->stations[sta_id].used & IL_STA_UCODE_INPROGRESS) {
+		D_INFO("STA %d already in process of being added.\n", sta_id);
+		spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+		return -EEXIST;
+	}
+
+	if ((il->stations[sta_id].used & IL_STA_DRIVER_ACTIVE) &&
+	    (il->stations[sta_id].used & IL_STA_UCODE_ACTIVE)) {
+		D_ASSOC("STA %d (%pM) already added, not adding again.\n",
+			sta_id, addr);
+		spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+		return -EEXIST;
+	}
+
+	il->stations[sta_id].used |= IL_STA_UCODE_INPROGRESS;
+	memcpy(&sta_cmd, &il->stations[sta_id].sta,
+	       sizeof(struct il_addsta_cmd));
+	spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+
+	/* Add station to device's station table */
+	ret = il_send_add_sta(il, &sta_cmd, CMD_SYNC);
+	if (ret) {
+		spin_lock_irqsave(&il->sta_lock, flags_spin);
+		IL_ERR("Adding station %pM failed.\n",
+		       il->stations[sta_id].sta.sta.addr);
+		il->stations[sta_id].used &= ~IL_STA_DRIVER_ACTIVE;
+		il->stations[sta_id].used &= ~IL_STA_UCODE_INPROGRESS;
+		spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+	}
+	*sta_id_r = sta_id;
+	return ret;
+}
+EXPORT_SYMBOL(il_add_station_common);
+
+/**
+ * il_sta_ucode_deactivate - deactivate ucode status for a station
+ *
+ * il->sta_lock must be held
+ */
+static void
+il_sta_ucode_deactivate(struct il_priv *il, u8 sta_id)
+{
+	/* Ucode must be active and driver must be non active */
+	if ((il->stations[sta_id].
+	     used & (IL_STA_UCODE_ACTIVE | IL_STA_DRIVER_ACTIVE)) !=
+	    IL_STA_UCODE_ACTIVE)
+		IL_ERR("removed non active STA %u\n", sta_id);
+
+	il->stations[sta_id].used &= ~IL_STA_UCODE_ACTIVE;
+
+	memset(&il->stations[sta_id], 0, sizeof(struct il_station_entry));
+	D_ASSOC("Removed STA %u\n", sta_id);
+}
+
+static int
+il_send_remove_station(struct il_priv *il, const u8 * addr, int sta_id,
+		       bool temporary)
+{
+	struct il_rx_pkt *pkt;
+	int ret;
+
+	unsigned long flags_spin;
+	struct il_rem_sta_cmd rm_sta_cmd;
+
+	struct il_host_cmd cmd = {
+		.id = C_REM_STA,
+		.len = sizeof(struct il_rem_sta_cmd),
+		.flags = CMD_SYNC,
+		.data = &rm_sta_cmd,
+	};
+
+	memset(&rm_sta_cmd, 0, sizeof(rm_sta_cmd));
+	rm_sta_cmd.num_sta = 1;
+	memcpy(&rm_sta_cmd.addr, addr, ETH_ALEN);
+
+	cmd.flags |= CMD_WANT_SKB;
+
+	ret = il_send_cmd(il, &cmd);
+
+	if (ret)
+		return ret;
+
+	pkt = (struct il_rx_pkt *)cmd.reply_page;
+	if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
+		IL_ERR("Bad return from C_REM_STA (0x%08X)\n", pkt->hdr.flags);
+		ret = -EIO;
+	}
+
+	if (!ret) {
+		switch (pkt->u.rem_sta.status) {
+		case REM_STA_SUCCESS_MSK:
+			if (!temporary) {
+				spin_lock_irqsave(&il->sta_lock, flags_spin);
+				il_sta_ucode_deactivate(il, sta_id);
+				spin_unlock_irqrestore(&il->sta_lock,
+						       flags_spin);
+			}
+			D_ASSOC("C_REM_STA PASSED\n");
+			break;
+		default:
+			ret = -EIO;
+			IL_ERR("C_REM_STA failed\n");
+			break;
+		}
+	}
+	il_free_pages(il, cmd.reply_page);
+
+	return ret;
+}
+
+/**
+ * il_remove_station - Remove driver's knowledge of station.
+ */
+int
+il_remove_station(struct il_priv *il, const u8 sta_id, const u8 * addr)
+{
+	unsigned long flags;
+
+	if (!il_is_ready(il)) {
+		D_INFO("Unable to remove station %pM, device not ready.\n",
+		       addr);
+		/*
+		 * It is typical for stations to be removed when we are
+		 * going down. Return success since device will be down
+		 * soon anyway
+		 */
+		return 0;
+	}
+
+	D_ASSOC("Removing STA from driver:%d  %pM\n", sta_id, addr);
+
+	if (WARN_ON(sta_id == IL_INVALID_STATION))
+		return -EINVAL;
+
+	spin_lock_irqsave(&il->sta_lock, flags);
+
+	if (!(il->stations[sta_id].used & IL_STA_DRIVER_ACTIVE)) {
+		D_INFO("Removing %pM but non DRIVER active\n", addr);
+		goto out_err;
+	}
+
+	if (!(il->stations[sta_id].used & IL_STA_UCODE_ACTIVE)) {
+		D_INFO("Removing %pM but non UCODE active\n", addr);
+		goto out_err;
+	}
+
+	if (il->stations[sta_id].used & IL_STA_LOCAL) {
+		kfree(il->stations[sta_id].lq);
+		il->stations[sta_id].lq = NULL;
+	}
+
+	il->stations[sta_id].used &= ~IL_STA_DRIVER_ACTIVE;
+
+	il->num_stations--;
+
+	BUG_ON(il->num_stations < 0);
+
+	spin_unlock_irqrestore(&il->sta_lock, flags);
+
+	return il_send_remove_station(il, addr, sta_id, false);
+out_err:
+	spin_unlock_irqrestore(&il->sta_lock, flags);
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(il_remove_station);
+
+/**
+ * il_clear_ucode_stations - clear ucode station table bits
+ *
+ * This function clears all the bits in the driver indicating
+ * which stations are active in the ucode. Call when something
+ * other than explicit station management would cause this in
+ * the ucode, e.g. unassociated RXON.
+ */
+void
+il_clear_ucode_stations(struct il_priv *il, struct il_rxon_context *ctx)
+{
+	int i;
+	unsigned long flags_spin;
+	bool cleared = false;
+
+	D_INFO("Clearing ucode stations in driver\n");
+
+	spin_lock_irqsave(&il->sta_lock, flags_spin);
+	for (i = 0; i < il->hw_params.max_stations; i++) {
+		if (ctx && ctx->ctxid != il->stations[i].ctxid)
+			continue;
+
+		if (il->stations[i].used & IL_STA_UCODE_ACTIVE) {
+			D_INFO("Clearing ucode active for station %d\n", i);
+			il->stations[i].used &= ~IL_STA_UCODE_ACTIVE;
+			cleared = true;
+		}
+	}
+	spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+
+	if (!cleared)
+		D_INFO("No active stations found to be cleared\n");
+}
+EXPORT_SYMBOL(il_clear_ucode_stations);
+
+/**
+ * il_restore_stations() - Restore driver known stations to device
+ *
+ * All stations considered active by driver, but not present in ucode, is
+ * restored.
+ *
+ * Function sleeps.
+ */
+void
+il_restore_stations(struct il_priv *il, struct il_rxon_context *ctx)
+{
+	struct il_addsta_cmd sta_cmd;
+	struct il_link_quality_cmd lq;
+	unsigned long flags_spin;
+	int i;
+	bool found = false;
+	int ret;
+	bool send_lq;
+
+	if (!il_is_ready(il)) {
+		D_INFO("Not ready yet, not restoring any stations.\n");
+		return;
+	}
+
+	D_ASSOC("Restoring all known stations ... start.\n");
+	spin_lock_irqsave(&il->sta_lock, flags_spin);
+	for (i = 0; i < il->hw_params.max_stations; i++) {
+		if (ctx->ctxid != il->stations[i].ctxid)
+			continue;
+		if ((il->stations[i].used & IL_STA_DRIVER_ACTIVE) &&
+		    !(il->stations[i].used & IL_STA_UCODE_ACTIVE)) {
+			D_ASSOC("Restoring sta %pM\n",
+				il->stations[i].sta.sta.addr);
+			il->stations[i].sta.mode = 0;
+			il->stations[i].used |= IL_STA_UCODE_INPROGRESS;
+			found = true;
+		}
+	}
+
+	for (i = 0; i < il->hw_params.max_stations; i++) {
+		if ((il->stations[i].used & IL_STA_UCODE_INPROGRESS)) {
+			memcpy(&sta_cmd, &il->stations[i].sta,
+			       sizeof(struct il_addsta_cmd));
+			send_lq = false;
+			if (il->stations[i].lq) {
+				memcpy(&lq, il->stations[i].lq,
+				       sizeof(struct il_link_quality_cmd));
+				send_lq = true;
+			}
+			spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+			ret = il_send_add_sta(il, &sta_cmd, CMD_SYNC);
+			if (ret) {
+				spin_lock_irqsave(&il->sta_lock, flags_spin);
+				IL_ERR("Adding station %pM failed.\n",
+				       il->stations[i].sta.sta.addr);
+				il->stations[i].used &= ~IL_STA_DRIVER_ACTIVE;
+				il->stations[i].used &=
+				    ~IL_STA_UCODE_INPROGRESS;
+				spin_unlock_irqrestore(&il->sta_lock,
+						       flags_spin);
+			}
+			/*
+			 * Rate scaling has already been initialized, send
+			 * current LQ command
+			 */
+			if (send_lq)
+				il_send_lq_cmd(il, ctx, &lq, CMD_SYNC, true);
+			spin_lock_irqsave(&il->sta_lock, flags_spin);
+			il->stations[i].used &= ~IL_STA_UCODE_INPROGRESS;
+		}
+	}
+
+	spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+	if (!found)
+		D_INFO("Restoring all known stations"
+		       " .... no stations to be restored.\n");
+	else
+		D_INFO("Restoring all known stations" " .... complete.\n");
+}
+EXPORT_SYMBOL(il_restore_stations);
+
+int
+il_get_free_ucode_key_idx(struct il_priv *il)
+{
+	int i;
+
+	for (i = 0; i < il->sta_key_max_num; i++)
+		if (!test_and_set_bit(i, &il->ucode_key_table))
+			return i;
+
+	return WEP_INVALID_OFFSET;
+}
+EXPORT_SYMBOL(il_get_free_ucode_key_idx);
+
+void
+il_dealloc_bcast_stations(struct il_priv *il)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&il->sta_lock, flags);
+	for (i = 0; i < il->hw_params.max_stations; i++) {
+		if (!(il->stations[i].used & IL_STA_BCAST))
+			continue;
+
+		il->stations[i].used &= ~IL_STA_UCODE_ACTIVE;
+		il->num_stations--;
+		BUG_ON(il->num_stations < 0);
+		kfree(il->stations[i].lq);
+		il->stations[i].lq = NULL;
+	}
+	spin_unlock_irqrestore(&il->sta_lock, flags);
+}
+EXPORT_SYMBOL_GPL(il_dealloc_bcast_stations);
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+static void
+il_dump_lq_cmd(struct il_priv *il, struct il_link_quality_cmd *lq)
+{
+	int i;
+	D_RATE("lq station id 0x%x\n", lq->sta_id);
+	D_RATE("lq ant 0x%X 0x%X\n", lq->general_params.single_stream_ant_msk,
+	       lq->general_params.dual_stream_ant_msk);
+
+	for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++)
+		D_RATE("lq idx %d 0x%X\n", i, lq->rs_table[i].rate_n_flags);
+}
+#else
+static inline void
+il_dump_lq_cmd(struct il_priv *il, struct il_link_quality_cmd *lq)
+{
+}
+#endif
+
+/**
+ * il_is_lq_table_valid() - Test one aspect of LQ cmd for validity
+ *
+ * It sometimes happens when a HT rate has been in use and we
+ * loose connectivity with AP then mac80211 will first tell us that the
+ * current channel is not HT anymore before removing the station. In such a
+ * scenario the RXON flags will be updated to indicate we are not
+ * communicating HT anymore, but the LQ command may still contain HT rates.
+ * Test for this to prevent driver from sending LQ command between the time
+ * RXON flags are updated and when LQ command is updated.
+ */
+static bool
+il_is_lq_table_valid(struct il_priv *il, struct il_rxon_context *ctx,
+		     struct il_link_quality_cmd *lq)
+{
+	int i;
+
+	if (ctx->ht.enabled)
+		return true;
+
+	D_INFO("Channel %u is not an HT channel\n", ctx->active.channel);
+	for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) {
+		if (le32_to_cpu(lq->rs_table[i].rate_n_flags) & RATE_MCS_HT_MSK) {
+			D_INFO("idx %d of LQ expects HT channel\n", i);
+			return false;
+		}
+	}
+	return true;
+}
+
+/**
+ * il_send_lq_cmd() - Send link quality command
+ * @init: This command is sent as part of station initialization right
+ *        after station has been added.
+ *
+ * The link quality command is sent as the last step of station creation.
+ * This is the special case in which init is set and we call a callback in
+ * this case to clear the state indicating that station creation is in
+ * progress.
+ */
+int
+il_send_lq_cmd(struct il_priv *il, struct il_rxon_context *ctx,
+	       struct il_link_quality_cmd *lq, u8 flags, bool init)
+{
+	int ret = 0;
+	unsigned long flags_spin;
+
+	struct il_host_cmd cmd = {
+		.id = C_TX_LINK_QUALITY_CMD,
+		.len = sizeof(struct il_link_quality_cmd),
+		.flags = flags,
+		.data = lq,
+	};
+
+	if (WARN_ON(lq->sta_id == IL_INVALID_STATION))
+		return -EINVAL;
+
+	spin_lock_irqsave(&il->sta_lock, flags_spin);
+	if (!(il->stations[lq->sta_id].used & IL_STA_DRIVER_ACTIVE)) {
+		spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+		return -EINVAL;
+	}
+	spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+
+	il_dump_lq_cmd(il, lq);
+	BUG_ON(init && (cmd.flags & CMD_ASYNC));
+
+	if (il_is_lq_table_valid(il, ctx, lq))
+		ret = il_send_cmd(il, &cmd);
+	else
+		ret = -EINVAL;
+
+	if (cmd.flags & CMD_ASYNC)
+		return ret;
+
+	if (init) {
+		D_INFO("init LQ command complete,"
+		       " clearing sta addition status for sta %d\n",
+		       lq->sta_id);
+		spin_lock_irqsave(&il->sta_lock, flags_spin);
+		il->stations[lq->sta_id].used &= ~IL_STA_UCODE_INPROGRESS;
+		spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+	}
+	return ret;
+}
+EXPORT_SYMBOL(il_send_lq_cmd);
+
+int
+il_mac_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		  struct ieee80211_sta *sta)
+{
+	struct il_priv *il = hw->priv;
+	struct il_station_priv_common *sta_common = (void *)sta->drv_priv;
+	int ret;
+
+	D_INFO("received request to remove station %pM\n", sta->addr);
+	mutex_lock(&il->mutex);
+	D_INFO("proceeding to remove station %pM\n", sta->addr);
+	ret = il_remove_station(il, sta_common->sta_id, sta->addr);
+	if (ret)
+		IL_ERR("Error removing station %pM\n", sta->addr);
+	mutex_unlock(&il->mutex);
+	return ret;
+}
+EXPORT_SYMBOL(il_mac_sta_remove);
+
+/************************** RX-FUNCTIONS ****************************/
+/*
+ * Rx theory of operation
+ *
+ * Driver allocates a circular buffer of Receive Buffer Descriptors (RBDs),
+ * each of which point to Receive Buffers to be filled by the NIC.  These get
+ * used not only for Rx frames, but for any command response or notification
+ * from the NIC.  The driver and NIC manage the Rx buffers by means
+ * of idxes into the circular buffer.
+ *
+ * Rx Queue Indexes
+ * The host/firmware share two idx registers for managing the Rx buffers.
+ *
+ * The READ idx maps to the first position that the firmware may be writing
+ * to -- the driver can read up to (but not including) this position and get
+ * good data.
+ * The READ idx is managed by the firmware once the card is enabled.
+ *
+ * The WRITE idx maps to the last position the driver has read from -- the
+ * position preceding WRITE is the last slot the firmware can place a packet.
+ *
+ * The queue is empty (no good data) if WRITE = READ - 1, and is full if
+ * WRITE = READ.
+ *
+ * During initialization, the host sets up the READ queue position to the first
+ * IDX position, and WRITE to the last (READ - 1 wrapped)
+ *
+ * When the firmware places a packet in a buffer, it will advance the READ idx
+ * and fire the RX interrupt.  The driver can then query the READ idx and
+ * process as many packets as possible, moving the WRITE idx forward as it
+ * resets the Rx queue buffers with new memory.
+ *
+ * The management in the driver is as follows:
+ * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free.  When
+ *   iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
+ *   to replenish the iwl->rxq->rx_free.
+ * + In il_rx_replenish (scheduled) if 'processed' != 'read' then the
+ *   iwl->rxq is replenished and the READ IDX is updated (updating the
+ *   'processed' and 'read' driver idxes as well)
+ * + A received packet is processed and handed to the kernel network stack,
+ *   detached from the iwl->rxq.  The driver 'processed' idx is updated.
+ * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
+ *   list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
+ *   IDX is not incremented and iwl->status(RX_STALLED) is set.  If there
+ *   were enough free buffers and RX_STALLED is set it is cleared.
+ *
+ *
+ * Driver sequence:
+ *
+ * il_rx_queue_alloc()   Allocates rx_free
+ * il_rx_replenish()     Replenishes rx_free list from rx_used, and calls
+ *                            il_rx_queue_restock
+ * il_rx_queue_restock() Moves available buffers from rx_free into Rx
+ *                            queue, updates firmware pointers, and updates
+ *                            the WRITE idx.  If insufficient rx_free buffers
+ *                            are available, schedules il_rx_replenish
+ *
+ * -- enable interrupts --
+ * ISR - il_rx()         Detach il_rx_bufs from pool up to the
+ *                            READ IDX, detaching the SKB from the pool.
+ *                            Moves the packet buffer from queue to rx_used.
+ *                            Calls il_rx_queue_restock to refill any empty
+ *                            slots.
+ * ...
+ *
+ */
+
+/**
+ * il_rx_queue_space - Return number of free slots available in queue.
+ */
+int
+il_rx_queue_space(const struct il_rx_queue *q)
+{
+	int s = q->read - q->write;
+	if (s <= 0)
+		s += RX_QUEUE_SIZE;
+	/* keep some buffer to not confuse full and empty queue */
+	s -= 2;
+	if (s < 0)
+		s = 0;
+	return s;
+}
+EXPORT_SYMBOL(il_rx_queue_space);
+
+/**
+ * il_rx_queue_update_write_ptr - Update the write pointer for the RX queue
+ */
+void
+il_rx_queue_update_write_ptr(struct il_priv *il, struct il_rx_queue *q)
+{
+	unsigned long flags;
+	u32 rx_wrt_ptr_reg = il->hw_params.rx_wrt_ptr_reg;
+	u32 reg;
+
+	spin_lock_irqsave(&q->lock, flags);
+
+	if (q->need_update == 0)
+		goto exit_unlock;
+
+	/* If power-saving is in use, make sure device is awake */
+	if (test_bit(S_POWER_PMI, &il->status)) {
+		reg = _il_rd(il, CSR_UCODE_DRV_GP1);
+
+		if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
+			D_INFO("Rx queue requesting wakeup," " GP1 = 0x%x\n",
+			       reg);
+			il_set_bit(il, CSR_GP_CNTRL,
+				   CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+			goto exit_unlock;
+		}
+
+		q->write_actual = (q->write & ~0x7);
+		il_wr(il, rx_wrt_ptr_reg, q->write_actual);
+
+		/* Else device is assumed to be awake */
+	} else {
+		/* Device expects a multiple of 8 */
+		q->write_actual = (q->write & ~0x7);
+		il_wr(il, rx_wrt_ptr_reg, q->write_actual);
+	}
+
+	q->need_update = 0;
+
+exit_unlock:
+	spin_unlock_irqrestore(&q->lock, flags);
+}
+EXPORT_SYMBOL(il_rx_queue_update_write_ptr);
+
+int
+il_rx_queue_alloc(struct il_priv *il)
+{
+	struct il_rx_queue *rxq = &il->rxq;
+	struct device *dev = &il->pci_dev->dev;
+	int i;
+
+	spin_lock_init(&rxq->lock);
+	INIT_LIST_HEAD(&rxq->rx_free);
+	INIT_LIST_HEAD(&rxq->rx_used);
+
+	/* Alloc the circular buffer of Read Buffer Descriptors (RBDs) */
+	rxq->bd =
+	    dma_alloc_coherent(dev, 4 * RX_QUEUE_SIZE, &rxq->bd_dma,
+			       GFP_KERNEL);
+	if (!rxq->bd)
+		goto err_bd;
+
+	rxq->rb_stts =
+	    dma_alloc_coherent(dev, sizeof(struct il_rb_status),
+			       &rxq->rb_stts_dma, GFP_KERNEL);
+	if (!rxq->rb_stts)
+		goto err_rb;
+
+	/* Fill the rx_used queue with _all_ of the Rx buffers */
+	for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++)
+		list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
+
+	/* Set us so that we have processed and used all buffers, but have
+	 * not restocked the Rx queue with fresh buffers */
+	rxq->read = rxq->write = 0;
+	rxq->write_actual = 0;
+	rxq->free_count = 0;
+	rxq->need_update = 0;
+	return 0;
+
+err_rb:
+	dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
+			  rxq->bd_dma);
+err_bd:
+	return -ENOMEM;
+}
+EXPORT_SYMBOL(il_rx_queue_alloc);
+
+void
+il_hdl_spectrum_measurement(struct il_priv *il, struct il_rx_buf *rxb)
+{
+	struct il_rx_pkt *pkt = rxb_addr(rxb);
+	struct il_spectrum_notification *report = &(pkt->u.spectrum_notif);
+
+	if (!report->state) {
+		D_11H("Spectrum Measure Notification: Start\n");
+		return;
+	}
+
+	memcpy(&il->measure_report, report, sizeof(*report));
+	il->measurement_status |= MEASUREMENT_READY;
+}
+EXPORT_SYMBOL(il_hdl_spectrum_measurement);
+
+/*
+ * returns non-zero if packet should be dropped
+ */
+int
+il_set_decrypted_flag(struct il_priv *il, struct ieee80211_hdr *hdr,
+		      u32 decrypt_res, struct ieee80211_rx_status *stats)
+{
+	u16 fc = le16_to_cpu(hdr->frame_control);
+
+	/*
+	 * All contexts have the same setting here due to it being
+	 * a module parameter, so OK to check any context.
+	 */
+	if (il->ctx.active.filter_flags & RXON_FILTER_DIS_DECRYPT_MSK)
+		return 0;
+
+	if (!(fc & IEEE80211_FCTL_PROTECTED))
+		return 0;
+
+	D_RX("decrypt_res:0x%x\n", decrypt_res);
+	switch (decrypt_res & RX_RES_STATUS_SEC_TYPE_MSK) {
+	case RX_RES_STATUS_SEC_TYPE_TKIP:
+		/* The uCode has got a bad phase 1 Key, pushes the packet.
+		 * Decryption will be done in SW. */
+		if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
+		    RX_RES_STATUS_BAD_KEY_TTAK)
+			break;
+
+	case RX_RES_STATUS_SEC_TYPE_WEP:
+		if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
+		    RX_RES_STATUS_BAD_ICV_MIC) {
+			/* bad ICV, the packet is destroyed since the
+			 * decryption is inplace, drop it */
+			D_RX("Packet destroyed\n");
+			return -1;
+		}
+	case RX_RES_STATUS_SEC_TYPE_CCMP:
+		if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
+		    RX_RES_STATUS_DECRYPT_OK) {
+			D_RX("hw decrypt successfully!!!\n");
+			stats->flag |= RX_FLAG_DECRYPTED;
+		}
+		break;
+
+	default:
+		break;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(il_set_decrypted_flag);
+
+/**
+ * il_txq_update_write_ptr - Send new write idx to hardware
+ */
+void
+il_txq_update_write_ptr(struct il_priv *il, struct il_tx_queue *txq)
+{
+	u32 reg = 0;
+	int txq_id = txq->q.id;
+
+	if (txq->need_update == 0)
+		return;
+
+	/* if we're trying to save power */
+	if (test_bit(S_POWER_PMI, &il->status)) {
+		/* wake up nic if it's powered down ...
+		 * uCode will wake up, and interrupt us again, so next
+		 * time we'll skip this part. */
+		reg = _il_rd(il, CSR_UCODE_DRV_GP1);
+
+		if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
+			D_INFO("Tx queue %d requesting wakeup," " GP1 = 0x%x\n",
+			       txq_id, reg);
+			il_set_bit(il, CSR_GP_CNTRL,
+				   CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+			return;
+		}
+
+		il_wr(il, HBUS_TARG_WRPTR, txq->q.write_ptr | (txq_id << 8));
+
+		/*
+		 * else not in power-save mode,
+		 * uCode will never sleep when we're
+		 * trying to tx (during RFKILL, we're not trying to tx).
+		 */
+	} else
+		_il_wr(il, HBUS_TARG_WRPTR, txq->q.write_ptr | (txq_id << 8));
+	txq->need_update = 0;
+}
+EXPORT_SYMBOL(il_txq_update_write_ptr);
+
+/**
+ * il_tx_queue_unmap -  Unmap any remaining DMA mappings and free skb's
+ */
+void
+il_tx_queue_unmap(struct il_priv *il, int txq_id)
+{
+	struct il_tx_queue *txq = &il->txq[txq_id];
+	struct il_queue *q = &txq->q;
+
+	if (q->n_bd == 0)
+		return;
+
+	while (q->write_ptr != q->read_ptr) {
+		il->cfg->ops->lib->txq_free_tfd(il, txq);
+		q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd);
+	}
+}
+EXPORT_SYMBOL(il_tx_queue_unmap);
+
+/**
+ * il_tx_queue_free - Deallocate DMA queue.
+ * @txq: Transmit queue to deallocate.
+ *
+ * Empty queue by removing and destroying all BD's.
+ * Free all buffers.
+ * 0-fill, but do not free "txq" descriptor structure.
+ */
+void
+il_tx_queue_free(struct il_priv *il, int txq_id)
+{
+	struct il_tx_queue *txq = &il->txq[txq_id];
+	struct device *dev = &il->pci_dev->dev;
+	int i;
+
+	il_tx_queue_unmap(il, txq_id);
+
+	/* De-alloc array of command/tx buffers */
+	for (i = 0; i < TFD_TX_CMD_SLOTS; i++)
+		kfree(txq->cmd[i]);
+
+	/* De-alloc circular buffer of TFDs */
+	if (txq->q.n_bd)
+		dma_free_coherent(dev, il->hw_params.tfd_size * txq->q.n_bd,
+				  txq->tfds, txq->q.dma_addr);
+
+	/* De-alloc array of per-TFD driver data */
+	kfree(txq->txb);
+	txq->txb = NULL;
+
+	/* deallocate arrays */
+	kfree(txq->cmd);
+	kfree(txq->meta);
+	txq->cmd = NULL;
+	txq->meta = NULL;
+
+	/* 0-fill queue descriptor structure */
+	memset(txq, 0, sizeof(*txq));
+}
+EXPORT_SYMBOL(il_tx_queue_free);
+
+/**
+ * il_cmd_queue_unmap - Unmap any remaining DMA mappings from command queue
+ */
+void
+il_cmd_queue_unmap(struct il_priv *il)
+{
+	struct il_tx_queue *txq = &il->txq[il->cmd_queue];
+	struct il_queue *q = &txq->q;
+	int i;
+
+	if (q->n_bd == 0)
+		return;
+
+	while (q->read_ptr != q->write_ptr) {
+		i = il_get_cmd_idx(q, q->read_ptr, 0);
+
+		if (txq->meta[i].flags & CMD_MAPPED) {
+			pci_unmap_single(il->pci_dev,
+					 dma_unmap_addr(&txq->meta[i], mapping),
+					 dma_unmap_len(&txq->meta[i], len),
+					 PCI_DMA_BIDIRECTIONAL);
+			txq->meta[i].flags = 0;
+		}
+
+		q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd);
+	}
+
+	i = q->n_win;
+	if (txq->meta[i].flags & CMD_MAPPED) {
+		pci_unmap_single(il->pci_dev,
+				 dma_unmap_addr(&txq->meta[i], mapping),
+				 dma_unmap_len(&txq->meta[i], len),
+				 PCI_DMA_BIDIRECTIONAL);
+		txq->meta[i].flags = 0;
+	}
+}
+EXPORT_SYMBOL(il_cmd_queue_unmap);
+
+/**
+ * il_cmd_queue_free - Deallocate DMA queue.
+ * @txq: Transmit queue to deallocate.
+ *
+ * Empty queue by removing and destroying all BD's.
+ * Free all buffers.
+ * 0-fill, but do not free "txq" descriptor structure.
+ */
+void
+il_cmd_queue_free(struct il_priv *il)
+{
+	struct il_tx_queue *txq = &il->txq[il->cmd_queue];
+	struct device *dev = &il->pci_dev->dev;
+	int i;
+
+	il_cmd_queue_unmap(il);
+
+	/* De-alloc array of command/tx buffers */
+	for (i = 0; i <= TFD_CMD_SLOTS; i++)
+		kfree(txq->cmd[i]);
+
+	/* De-alloc circular buffer of TFDs */
+	if (txq->q.n_bd)
+		dma_free_coherent(dev, il->hw_params.tfd_size * txq->q.n_bd,
+				  txq->tfds, txq->q.dma_addr);
+
+	/* deallocate arrays */
+	kfree(txq->cmd);
+	kfree(txq->meta);
+	txq->cmd = NULL;
+	txq->meta = NULL;
+
+	/* 0-fill queue descriptor structure */
+	memset(txq, 0, sizeof(*txq));
+}
+EXPORT_SYMBOL(il_cmd_queue_free);
+
+/*************** DMA-QUEUE-GENERAL-FUNCTIONS  *****
+ * DMA services
+ *
+ * Theory of operation
+ *
+ * A Tx or Rx queue resides in host DRAM, and is comprised of a circular buffer
+ * of buffer descriptors, each of which points to one or more data buffers for
+ * the device to read from or fill.  Driver and device exchange status of each
+ * queue via "read" and "write" pointers.  Driver keeps minimum of 2 empty
+ * entries in each circular buffer, to protect against confusing empty and full
+ * queue states.
+ *
+ * The device reads or writes the data in the queues via the device's several
+ * DMA/FIFO channels.  Each queue is mapped to a single DMA channel.
+ *
+ * For Tx queue, there are low mark and high mark limits. If, after queuing
+ * the packet for Tx, free space become < low mark, Tx queue stopped. When
+ * reclaiming packets (on 'tx done IRQ), if free space become > high mark,
+ * Tx queue resumed.
+ *
+ * See more detailed info in 4965.h.
+ ***************************************************/
+
+int
+il_queue_space(const struct il_queue *q)
+{
+	int s = q->read_ptr - q->write_ptr;
+
+	if (q->read_ptr > q->write_ptr)
+		s -= q->n_bd;
+
+	if (s <= 0)
+		s += q->n_win;
+	/* keep some reserve to not confuse empty and full situations */
+	s -= 2;
+	if (s < 0)
+		s = 0;
+	return s;
+}
+EXPORT_SYMBOL(il_queue_space);
+
+
+/**
+ * il_queue_init - Initialize queue's high/low-water and read/write idxes
+ */
+static int
+il_queue_init(struct il_priv *il, struct il_queue *q, int count, int slots_num,
+	      u32 id)
+{
+	q->n_bd = count;
+	q->n_win = slots_num;
+	q->id = id;
+
+	/* count must be power-of-two size, otherwise il_queue_inc_wrap
+	 * and il_queue_dec_wrap are broken. */
+	BUG_ON(!is_power_of_2(count));
+
+	/* slots_num must be power-of-two size, otherwise
+	 * il_get_cmd_idx is broken. */
+	BUG_ON(!is_power_of_2(slots_num));
+
+	q->low_mark = q->n_win / 4;
+	if (q->low_mark < 4)
+		q->low_mark = 4;
+
+	q->high_mark = q->n_win / 8;
+	if (q->high_mark < 2)
+		q->high_mark = 2;
+
+	q->write_ptr = q->read_ptr = 0;
+
+	return 0;
+}
+
+/**
+ * il_tx_queue_alloc - Alloc driver data and TFD CB for one Tx/cmd queue
+ */
+static int
+il_tx_queue_alloc(struct il_priv *il, struct il_tx_queue *txq, u32 id)
+{
+	struct device *dev = &il->pci_dev->dev;
+	size_t tfd_sz = il->hw_params.tfd_size * TFD_QUEUE_SIZE_MAX;
+
+	/* Driver ilate data, only for Tx (not command) queues,
+	 * not shared with device. */
+	if (id != il->cmd_queue) {
+		txq->txb =
+		    kzalloc(sizeof(txq->txb[0]) * TFD_QUEUE_SIZE_MAX,
+			    GFP_KERNEL);
+		if (!txq->txb) {
+			IL_ERR("kmalloc for auxiliary BD "
+			       "structures failed\n");
+			goto error;
+		}
+	} else {
+		txq->txb = NULL;
+	}
+
+	/* Circular buffer of transmit frame descriptors (TFDs),
+	 * shared with device */
+	txq->tfds =
+	    dma_alloc_coherent(dev, tfd_sz, &txq->q.dma_addr, GFP_KERNEL);
+	if (!txq->tfds) {
+		IL_ERR("pci_alloc_consistent(%zd) failed\n", tfd_sz);
+		goto error;
+	}
+	txq->q.id = id;
+
+	return 0;
+
+error:
+	kfree(txq->txb);
+	txq->txb = NULL;
+
+	return -ENOMEM;
+}
+
+/**
+ * il_tx_queue_init - Allocate and initialize one tx/cmd queue
+ */
+int
+il_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq, int slots_num,
+		 u32 txq_id)
+{
+	int i, len;
+	int ret;
+	int actual_slots = slots_num;
+
+	/*
+	 * Alloc buffer array for commands (Tx or other types of commands).
+	 * For the command queue (#4/#9), allocate command space + one big
+	 * command for scan, since scan command is very huge; the system will
+	 * not have two scans at the same time, so only one is needed.
+	 * For normal Tx queues (all other queues), no super-size command
+	 * space is needed.
+	 */
+	if (txq_id == il->cmd_queue)
+		actual_slots++;
+
+	txq->meta =
+	    kzalloc(sizeof(struct il_cmd_meta) * actual_slots, GFP_KERNEL);
+	txq->cmd =
+	    kzalloc(sizeof(struct il_device_cmd *) * actual_slots, GFP_KERNEL);
+
+	if (!txq->meta || !txq->cmd)
+		goto out_free_arrays;
+
+	len = sizeof(struct il_device_cmd);
+	for (i = 0; i < actual_slots; i++) {
+		/* only happens for cmd queue */
+		if (i == slots_num)
+			len = IL_MAX_CMD_SIZE;
+
+		txq->cmd[i] = kmalloc(len, GFP_KERNEL);
+		if (!txq->cmd[i])
+			goto err;
+	}
+
+	/* Alloc driver data array and TFD circular buffer */
+	ret = il_tx_queue_alloc(il, txq, txq_id);
+	if (ret)
+		goto err;
+
+	txq->need_update = 0;
+
+	/*
+	 * For the default queues 0-3, set up the swq_id
+	 * already -- all others need to get one later
+	 * (if they need one at all).
+	 */
+	if (txq_id < 4)
+		il_set_swq_id(txq, txq_id, txq_id);
+
+	/* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise
+	 * il_queue_inc_wrap and il_queue_dec_wrap are broken. */
+	BUILD_BUG_ON(TFD_QUEUE_SIZE_MAX & (TFD_QUEUE_SIZE_MAX - 1));
+
+	/* Initialize queue's high/low-water marks, and head/tail idxes */
+	il_queue_init(il, &txq->q, TFD_QUEUE_SIZE_MAX, slots_num, txq_id);
+
+	/* Tell device where to find queue */
+	il->cfg->ops->lib->txq_init(il, txq);
+
+	return 0;
+err:
+	for (i = 0; i < actual_slots; i++)
+		kfree(txq->cmd[i]);
+out_free_arrays:
+	kfree(txq->meta);
+	kfree(txq->cmd);
+
+	return -ENOMEM;
+}
+EXPORT_SYMBOL(il_tx_queue_init);
+
+void
+il_tx_queue_reset(struct il_priv *il, struct il_tx_queue *txq, int slots_num,
+		  u32 txq_id)
+{
+	int actual_slots = slots_num;
+
+	if (txq_id == il->cmd_queue)
+		actual_slots++;
+
+	memset(txq->meta, 0, sizeof(struct il_cmd_meta) * actual_slots);
+
+	txq->need_update = 0;
+
+	/* Initialize queue's high/low-water marks, and head/tail idxes */
+	il_queue_init(il, &txq->q, TFD_QUEUE_SIZE_MAX, slots_num, txq_id);
+
+	/* Tell device where to find queue */
+	il->cfg->ops->lib->txq_init(il, txq);
+}
+EXPORT_SYMBOL(il_tx_queue_reset);
+
+/*************** HOST COMMAND QUEUE FUNCTIONS   *****/
+
+/**
+ * il_enqueue_hcmd - enqueue a uCode command
+ * @il: device ilate data point
+ * @cmd: a point to the ucode command structure
+ *
+ * The function returns < 0 values to indicate the operation is
+ * failed. On success, it turns the idx (> 0) of command in the
+ * command queue.
+ */
+int
+il_enqueue_hcmd(struct il_priv *il, struct il_host_cmd *cmd)
+{
+	struct il_tx_queue *txq = &il->txq[il->cmd_queue];
+	struct il_queue *q = &txq->q;
+	struct il_device_cmd *out_cmd;
+	struct il_cmd_meta *out_meta;
+	dma_addr_t phys_addr;
+	unsigned long flags;
+	int len;
+	u32 idx;
+	u16 fix_size;
+
+	cmd->len = il->cfg->ops->utils->get_hcmd_size(cmd->id, cmd->len);
+	fix_size = (u16) (cmd->len + sizeof(out_cmd->hdr));
+
+	/* If any of the command structures end up being larger than
+	 * the TFD_MAX_PAYLOAD_SIZE, and it sent as a 'small' command then
+	 * we will need to increase the size of the TFD entries
+	 * Also, check to see if command buffer should not exceed the size
+	 * of device_cmd and max_cmd_size. */
+	BUG_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) &&
+	       !(cmd->flags & CMD_SIZE_HUGE));
+	BUG_ON(fix_size > IL_MAX_CMD_SIZE);
+
+	if (il_is_rfkill(il) || il_is_ctkill(il)) {
+		IL_WARN("Not sending command - %s KILL\n",
+			il_is_rfkill(il) ? "RF" : "CT");
+		return -EIO;
+	}
+
+	spin_lock_irqsave(&il->hcmd_lock, flags);
+
+	if (il_queue_space(q) < ((cmd->flags & CMD_ASYNC) ? 2 : 1)) {
+		spin_unlock_irqrestore(&il->hcmd_lock, flags);
+
+		IL_ERR("Restarting adapter due to command queue full\n");
+		queue_work(il->workqueue, &il->restart);
+		return -ENOSPC;
+	}
+
+	idx = il_get_cmd_idx(q, q->write_ptr, cmd->flags & CMD_SIZE_HUGE);
+	out_cmd = txq->cmd[idx];
+	out_meta = &txq->meta[idx];
+
+	if (WARN_ON(out_meta->flags & CMD_MAPPED)) {
+		spin_unlock_irqrestore(&il->hcmd_lock, flags);
+		return -ENOSPC;
+	}
+
+	memset(out_meta, 0, sizeof(*out_meta));	/* re-initialize to NULL */
+	out_meta->flags = cmd->flags | CMD_MAPPED;
+	if (cmd->flags & CMD_WANT_SKB)
+		out_meta->source = cmd;
+	if (cmd->flags & CMD_ASYNC)
+		out_meta->callback = cmd->callback;
+
+	out_cmd->hdr.cmd = cmd->id;
+	memcpy(&out_cmd->cmd.payload, cmd->data, cmd->len);
+
+	/* At this point, the out_cmd now has all of the incoming cmd
+	 * information */
+
+	out_cmd->hdr.flags = 0;
+	out_cmd->hdr.sequence =
+	    cpu_to_le16(QUEUE_TO_SEQ(il->cmd_queue) | IDX_TO_SEQ(q->write_ptr));
+	if (cmd->flags & CMD_SIZE_HUGE)
+		out_cmd->hdr.sequence |= SEQ_HUGE_FRAME;
+	len = sizeof(struct il_device_cmd);
+	if (idx == TFD_CMD_SLOTS)
+		len = IL_MAX_CMD_SIZE;
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+	switch (out_cmd->hdr.cmd) {
+	case C_TX_LINK_QUALITY_CMD:
+	case C_SENSITIVITY:
+		D_HC_DUMP("Sending command %s (#%x), seq: 0x%04X, "
+			  "%d bytes at %d[%d]:%d\n",
+			  il_get_cmd_string(out_cmd->hdr.cmd), out_cmd->hdr.cmd,
+			  le16_to_cpu(out_cmd->hdr.sequence), fix_size,
+			  q->write_ptr, idx, il->cmd_queue);
+		break;
+	default:
+		D_HC("Sending command %s (#%x), seq: 0x%04X, "
+		     "%d bytes at %d[%d]:%d\n",
+		     il_get_cmd_string(out_cmd->hdr.cmd), out_cmd->hdr.cmd,
+		     le16_to_cpu(out_cmd->hdr.sequence), fix_size, q->write_ptr,
+		     idx, il->cmd_queue);
+	}
+#endif
+	txq->need_update = 1;
+
+	if (il->cfg->ops->lib->txq_update_byte_cnt_tbl)
+		/* Set up entry in queue's byte count circular buffer */
+		il->cfg->ops->lib->txq_update_byte_cnt_tbl(il, txq, 0);
+
+	phys_addr =
+	    pci_map_single(il->pci_dev, &out_cmd->hdr, fix_size,
+			   PCI_DMA_BIDIRECTIONAL);
+	dma_unmap_addr_set(out_meta, mapping, phys_addr);
+	dma_unmap_len_set(out_meta, len, fix_size);
+
+	il->cfg->ops->lib->txq_attach_buf_to_tfd(il, txq, phys_addr, fix_size,
+						 1, U32_PAD(cmd->len));
+
+	/* Increment and update queue's write idx */
+	q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd);
+	il_txq_update_write_ptr(il, txq);
+
+	spin_unlock_irqrestore(&il->hcmd_lock, flags);
+	return idx;
+}
+
+/**
+ * il_hcmd_queue_reclaim - Reclaim TX command queue entries already Tx'd
+ *
+ * When FW advances 'R' idx, all entries between old and new 'R' idx
+ * need to be reclaimed. As result, some free space forms.  If there is
+ * enough free space (> low mark), wake the stack that feeds us.
+ */
+static void
+il_hcmd_queue_reclaim(struct il_priv *il, int txq_id, int idx, int cmd_idx)
+{
+	struct il_tx_queue *txq = &il->txq[txq_id];
+	struct il_queue *q = &txq->q;
+	int nfreed = 0;
+
+	if (idx >= q->n_bd || il_queue_used(q, idx) == 0) {
+		IL_ERR("Read idx for DMA queue txq id (%d), idx %d, "
+		       "is out of range [0-%d] %d %d.\n", txq_id, idx, q->n_bd,
+		       q->write_ptr, q->read_ptr);
+		return;
+	}
+
+	for (idx = il_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx;
+	     q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) {
+
+		if (nfreed++ > 0) {
+			IL_ERR("HCMD skipped: idx (%d) %d %d\n", idx,
+			       q->write_ptr, q->read_ptr);
+			queue_work(il->workqueue, &il->restart);
+		}
+
+	}
+}
+
+/**
+ * il_tx_cmd_complete - Pull unused buffers off the queue and reclaim them
+ * @rxb: Rx buffer to reclaim
+ *
+ * If an Rx buffer has an async callback associated with it the callback
+ * will be executed.  The attached skb (if present) will only be freed
+ * if the callback returns 1
+ */
+void
+il_tx_cmd_complete(struct il_priv *il, struct il_rx_buf *rxb)
+{
+	struct il_rx_pkt *pkt = rxb_addr(rxb);
+	u16 sequence = le16_to_cpu(pkt->hdr.sequence);
+	int txq_id = SEQ_TO_QUEUE(sequence);
+	int idx = SEQ_TO_IDX(sequence);
+	int cmd_idx;
+	bool huge = !!(pkt->hdr.sequence & SEQ_HUGE_FRAME);
+	struct il_device_cmd *cmd;
+	struct il_cmd_meta *meta;
+	struct il_tx_queue *txq = &il->txq[il->cmd_queue];
+	unsigned long flags;
+
+	/* If a Tx command is being handled and it isn't in the actual
+	 * command queue then there a command routing bug has been introduced
+	 * in the queue management code. */
+	if (WARN
+	    (txq_id != il->cmd_queue,
+	     "wrong command queue %d (should be %d), sequence 0x%X readp=%d writep=%d\n",
+	     txq_id, il->cmd_queue, sequence, il->txq[il->cmd_queue].q.read_ptr,
+	     il->txq[il->cmd_queue].q.write_ptr)) {
+		il_print_hex_error(il, pkt, 32);
+		return;
+	}
+
+	cmd_idx = il_get_cmd_idx(&txq->q, idx, huge);
+	cmd = txq->cmd[cmd_idx];
+	meta = &txq->meta[cmd_idx];
+
+	txq->time_stamp = jiffies;
+
+	pci_unmap_single(il->pci_dev, dma_unmap_addr(meta, mapping),
+			 dma_unmap_len(meta, len), PCI_DMA_BIDIRECTIONAL);
+
+	/* Input error checking is done when commands are added to queue. */
+	if (meta->flags & CMD_WANT_SKB) {
+		meta->source->reply_page = (unsigned long)rxb_addr(rxb);
+		rxb->page = NULL;
+	} else if (meta->callback)
+		meta->callback(il, cmd, pkt);
+
+	spin_lock_irqsave(&il->hcmd_lock, flags);
+
+	il_hcmd_queue_reclaim(il, txq_id, idx, cmd_idx);
+
+	if (!(meta->flags & CMD_ASYNC)) {
+		clear_bit(S_HCMD_ACTIVE, &il->status);
+		D_INFO("Clearing HCMD_ACTIVE for command %s\n",
+		       il_get_cmd_string(cmd->hdr.cmd));
+		wake_up(&il->wait_command_queue);
+	}
+
+	/* Mark as unmapped */
+	meta->flags = 0;
+
+	spin_unlock_irqrestore(&il->hcmd_lock, flags);
+}
+EXPORT_SYMBOL(il_tx_cmd_complete);
+
+MODULE_DESCRIPTION("iwl-legacy: common functions for 3945 and 4965");
+MODULE_VERSION(IWLWIFI_VERSION);
+MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
+MODULE_LICENSE("GPL");
+
+/*
+ * set bt_coex_active to true, uCode will do kill/defer
+ * every time the priority line is asserted (BT is sending signals on the
+ * priority line in the PCIx).
+ * set bt_coex_active to false, uCode will ignore the BT activity and
+ * perform the normal operation
+ *
+ * User might experience transmit issue on some platform due to WiFi/BT
+ * co-exist problem. The possible behaviors are:
+ *   Able to scan and finding all the available AP
+ *   Not able to associate with any AP
+ * On those platforms, WiFi communication can be restored by set
+ * "bt_coex_active" module parameter to "false"
+ *
+ * default: bt_coex_active = true (BT_COEX_ENABLE)
+ */
+static bool bt_coex_active = true;
+module_param(bt_coex_active, bool, S_IRUGO);
+MODULE_PARM_DESC(bt_coex_active, "enable wifi/bluetooth co-exist");
+
+u32 il_debug_level;
+EXPORT_SYMBOL(il_debug_level);
+
+const u8 il_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
+EXPORT_SYMBOL(il_bcast_addr);
+
+/* This function both allocates and initializes hw and il. */
+struct ieee80211_hw *
+il_alloc_all(struct il_cfg *cfg)
+{
+	struct il_priv *il;
+	/* mac80211 allocates memory for this device instance, including
+	 *   space for this driver's ilate structure */
+	struct ieee80211_hw *hw;
+
+	hw = ieee80211_alloc_hw(sizeof(struct il_priv),
+				cfg->ops->ieee80211_ops);
+	if (hw == NULL) {
+		pr_err("%s: Can not allocate network device\n", cfg->name);
+		goto out;
+	}
+
+	il = hw->priv;
+	il->hw = hw;
+
+out:
+	return hw;
+}
+EXPORT_SYMBOL(il_alloc_all);
+
+#define MAX_BIT_RATE_40_MHZ 150	/* Mbps */
+#define MAX_BIT_RATE_20_MHZ 72	/* Mbps */
+static void
+il_init_ht_hw_capab(const struct il_priv *il,
+		    struct ieee80211_sta_ht_cap *ht_info,
+		    enum ieee80211_band band)
+{
+	u16 max_bit_rate = 0;
+	u8 rx_chains_num = il->hw_params.rx_chains_num;
+	u8 tx_chains_num = il->hw_params.tx_chains_num;
+
+	ht_info->cap = 0;
+	memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
+
+	ht_info->ht_supported = true;
+
+	ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
+	max_bit_rate = MAX_BIT_RATE_20_MHZ;
+	if (il->hw_params.ht40_channel & BIT(band)) {
+		ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+		ht_info->cap |= IEEE80211_HT_CAP_SGI_40;
+		ht_info->mcs.rx_mask[4] = 0x01;
+		max_bit_rate = MAX_BIT_RATE_40_MHZ;
+	}
+
+	if (il->cfg->mod_params->amsdu_size_8K)
+		ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU;
+
+	ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF;
+	ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF;
+
+	ht_info->mcs.rx_mask[0] = 0xFF;
+	if (rx_chains_num >= 2)
+		ht_info->mcs.rx_mask[1] = 0xFF;
+	if (rx_chains_num >= 3)
+		ht_info->mcs.rx_mask[2] = 0xFF;
+
+	/* Highest supported Rx data rate */
+	max_bit_rate *= rx_chains_num;
+	WARN_ON(max_bit_rate & ~IEEE80211_HT_MCS_RX_HIGHEST_MASK);
+	ht_info->mcs.rx_highest = cpu_to_le16(max_bit_rate);
+
+	/* Tx MCS capabilities */
+	ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
+	if (tx_chains_num != rx_chains_num) {
+		ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
+		ht_info->mcs.tx_params |=
+		    ((tx_chains_num -
+		      1) << IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
+	}
+}
+
+/**
+ * il_init_geos - Initialize mac80211's geo/channel info based from eeprom
+ */
+int
+il_init_geos(struct il_priv *il)
+{
+	struct il_channel_info *ch;
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_channel *channels;
+	struct ieee80211_channel *geo_ch;
+	struct ieee80211_rate *rates;
+	int i = 0;
+	s8 max_tx_power = 0;
+
+	if (il->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
+	    il->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
+		D_INFO("Geography modes already initialized.\n");
+		set_bit(S_GEO_CONFIGURED, &il->status);
+		return 0;
+	}
+
+	channels =
+	    kzalloc(sizeof(struct ieee80211_channel) * il->channel_count,
+		    GFP_KERNEL);
+	if (!channels)
+		return -ENOMEM;
+
+	rates =
+	    kzalloc((sizeof(struct ieee80211_rate) * RATE_COUNT_LEGACY),
+		    GFP_KERNEL);
+	if (!rates) {
+		kfree(channels);
+		return -ENOMEM;
+	}
+
+	/* 5.2GHz channels start after the 2.4GHz channels */
+	sband = &il->bands[IEEE80211_BAND_5GHZ];
+	sband->channels = &channels[ARRAY_SIZE(il_eeprom_band_1)];
+	/* just OFDM */
+	sband->bitrates = &rates[IL_FIRST_OFDM_RATE];
+	sband->n_bitrates = RATE_COUNT_LEGACY - IL_FIRST_OFDM_RATE;
+
+	if (il->cfg->sku & IL_SKU_N)
+		il_init_ht_hw_capab(il, &sband->ht_cap, IEEE80211_BAND_5GHZ);
+
+	sband = &il->bands[IEEE80211_BAND_2GHZ];
+	sband->channels = channels;
+	/* OFDM & CCK */
+	sband->bitrates = rates;
+	sband->n_bitrates = RATE_COUNT_LEGACY;
+
+	if (il->cfg->sku & IL_SKU_N)
+		il_init_ht_hw_capab(il, &sband->ht_cap, IEEE80211_BAND_2GHZ);
+
+	il->ieee_channels = channels;
+	il->ieee_rates = rates;
+
+	for (i = 0; i < il->channel_count; i++) {
+		ch = &il->channel_info[i];
+
+		if (!il_is_channel_valid(ch))
+			continue;
+
+		sband = &il->bands[ch->band];
+
+		geo_ch = &sband->channels[sband->n_channels++];
+
+		geo_ch->center_freq =
+		    ieee80211_channel_to_frequency(ch->channel, ch->band);
+		geo_ch->max_power = ch->max_power_avg;
+		geo_ch->max_antenna_gain = 0xff;
+		geo_ch->hw_value = ch->channel;
+
+		if (il_is_channel_valid(ch)) {
+			if (!(ch->flags & EEPROM_CHANNEL_IBSS))
+				geo_ch->flags |= IEEE80211_CHAN_NO_IBSS;
+
+			if (!(ch->flags & EEPROM_CHANNEL_ACTIVE))
+				geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN;
+
+			if (ch->flags & EEPROM_CHANNEL_RADAR)
+				geo_ch->flags |= IEEE80211_CHAN_RADAR;
+
+			geo_ch->flags |= ch->ht40_extension_channel;
+
+			if (ch->max_power_avg > max_tx_power)
+				max_tx_power = ch->max_power_avg;
+		} else {
+			geo_ch->flags |= IEEE80211_CHAN_DISABLED;
+		}
+
+		D_INFO("Channel %d Freq=%d[%sGHz] %s flag=0x%X\n", ch->channel,
+		       geo_ch->center_freq,
+		       il_is_channel_a_band(ch) ? "5.2" : "2.4",
+		       geo_ch->
+		       flags & IEEE80211_CHAN_DISABLED ? "restricted" : "valid",
+		       geo_ch->flags);
+	}
+
+	il->tx_power_device_lmt = max_tx_power;
+	il->tx_power_user_lmt = max_tx_power;
+	il->tx_power_next = max_tx_power;
+
+	if (il->bands[IEEE80211_BAND_5GHZ].n_channels == 0 &&
+	    (il->cfg->sku & IL_SKU_A)) {
+		IL_INFO("Incorrectly detected BG card as ABG. "
+			"Please send your PCI ID 0x%04X:0x%04X to maintainer.\n",
+			il->pci_dev->device, il->pci_dev->subsystem_device);
+		il->cfg->sku &= ~IL_SKU_A;
+	}
+
+	IL_INFO("Tunable channels: %d 802.11bg, %d 802.11a channels\n",
+		il->bands[IEEE80211_BAND_2GHZ].n_channels,
+		il->bands[IEEE80211_BAND_5GHZ].n_channels);
+
+	set_bit(S_GEO_CONFIGURED, &il->status);
+
+	return 0;
+}
+EXPORT_SYMBOL(il_init_geos);
+
+/*
+ * il_free_geos - undo allocations in il_init_geos
+ */
+void
+il_free_geos(struct il_priv *il)
+{
+	kfree(il->ieee_channels);
+	kfree(il->ieee_rates);
+	clear_bit(S_GEO_CONFIGURED, &il->status);
+}
+EXPORT_SYMBOL(il_free_geos);
+
+static bool
+il_is_channel_extension(struct il_priv *il, enum ieee80211_band band,
+			u16 channel, u8 extension_chan_offset)
+{
+	const struct il_channel_info *ch_info;
+
+	ch_info = il_get_channel_info(il, band, channel);
+	if (!il_is_channel_valid(ch_info))
+		return false;
+
+	if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE)
+		return !(ch_info->
+			 ht40_extension_channel & IEEE80211_CHAN_NO_HT40PLUS);
+	else if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW)
+		return !(ch_info->
+			 ht40_extension_channel & IEEE80211_CHAN_NO_HT40MINUS);
+
+	return false;
+}
+
+bool
+il_is_ht40_tx_allowed(struct il_priv *il, struct il_rxon_context *ctx,
+		      struct ieee80211_sta_ht_cap *ht_cap)
+{
+	if (!ctx->ht.enabled || !ctx->ht.is_40mhz)
+		return false;
+
+	/*
+	 * We do not check for IEEE80211_HT_CAP_SUP_WIDTH_20_40
+	 * the bit will not set if it is pure 40MHz case
+	 */
+	if (ht_cap && !ht_cap->ht_supported)
+		return false;
+
+#ifdef CONFIG_IWLEGACY_DEBUGFS
+	if (il->disable_ht40)
+		return false;
+#endif
+
+	return il_is_channel_extension(il, il->band,
+				       le16_to_cpu(ctx->staging.channel),
+				       ctx->ht.extension_chan_offset);
+}
+EXPORT_SYMBOL(il_is_ht40_tx_allowed);
+
+static u16
+il_adjust_beacon_interval(u16 beacon_val, u16 max_beacon_val)
+{
+	u16 new_val;
+	u16 beacon_factor;
+
+	/*
+	 * If mac80211 hasn't given us a beacon interval, program
+	 * the default into the device.
+	 */
+	if (!beacon_val)
+		return DEFAULT_BEACON_INTERVAL;
+
+	/*
+	 * If the beacon interval we obtained from the peer
+	 * is too large, we'll have to wake up more often
+	 * (and in IBSS case, we'll beacon too much)
+	 *
+	 * For example, if max_beacon_val is 4096, and the
+	 * requested beacon interval is 7000, we'll have to
+	 * use 3500 to be able to wake up on the beacons.
+	 *
+	 * This could badly influence beacon detection stats.
+	 */
+
+	beacon_factor = (beacon_val + max_beacon_val) / max_beacon_val;
+	new_val = beacon_val / beacon_factor;
+
+	if (!new_val)
+		new_val = max_beacon_val;
+
+	return new_val;
+}
+
+int
+il_send_rxon_timing(struct il_priv *il, struct il_rxon_context *ctx)
+{
+	u64 tsf;
+	s32 interval_tm, rem;
+	struct ieee80211_conf *conf = NULL;
+	u16 beacon_int;
+	struct ieee80211_vif *vif = ctx->vif;
+
+	conf = &il->hw->conf;
+
+	lockdep_assert_held(&il->mutex);
+
+	memset(&ctx->timing, 0, sizeof(struct il_rxon_time_cmd));
+
+	ctx->timing.timestamp = cpu_to_le64(il->timestamp);
+	ctx->timing.listen_interval = cpu_to_le16(conf->listen_interval);
+
+	beacon_int = vif ? vif->bss_conf.beacon_int : 0;
+
+	/*
+	 * TODO: For IBSS we need to get atim_win from mac80211,
+	 *       for now just always use 0
+	 */
+	ctx->timing.atim_win = 0;
+
+	beacon_int =
+	    il_adjust_beacon_interval(beacon_int,
+				      il->hw_params.max_beacon_itrvl *
+				      TIME_UNIT);
+	ctx->timing.beacon_interval = cpu_to_le16(beacon_int);
+
+	tsf = il->timestamp;	/* tsf is modifed by do_div: copy it */
+	interval_tm = beacon_int * TIME_UNIT;
+	rem = do_div(tsf, interval_tm);
+	ctx->timing.beacon_init_val = cpu_to_le32(interval_tm - rem);
+
+	ctx->timing.dtim_period = vif ? (vif->bss_conf.dtim_period ? : 1) : 1;
+
+	D_ASSOC("beacon interval %d beacon timer %d beacon tim %d\n",
+		le16_to_cpu(ctx->timing.beacon_interval),
+		le32_to_cpu(ctx->timing.beacon_init_val),
+		le16_to_cpu(ctx->timing.atim_win));
+
+	return il_send_cmd_pdu(il, ctx->rxon_timing_cmd, sizeof(ctx->timing),
+			       &ctx->timing);
+}
+EXPORT_SYMBOL(il_send_rxon_timing);
+
+void
+il_set_rxon_hwcrypto(struct il_priv *il, struct il_rxon_context *ctx,
+		     int hw_decrypt)
+{
+	struct il_rxon_cmd *rxon = &ctx->staging;
+
+	if (hw_decrypt)
+		rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK;
+	else
+		rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK;
+
+}
+EXPORT_SYMBOL(il_set_rxon_hwcrypto);
+
+/* validate RXON structure is valid */
+int
+il_check_rxon_cmd(struct il_priv *il, struct il_rxon_context *ctx)
+{
+	struct il_rxon_cmd *rxon = &ctx->staging;
+	bool error = false;
+
+	if (rxon->flags & RXON_FLG_BAND_24G_MSK) {
+		if (rxon->flags & RXON_FLG_TGJ_NARROW_BAND_MSK) {
+			IL_WARN("check 2.4G: wrong narrow\n");
+			error = true;
+		}
+		if (rxon->flags & RXON_FLG_RADAR_DETECT_MSK) {
+			IL_WARN("check 2.4G: wrong radar\n");
+			error = true;
+		}
+	} else {
+		if (!(rxon->flags & RXON_FLG_SHORT_SLOT_MSK)) {
+			IL_WARN("check 5.2G: not short slot!\n");
+			error = true;
+		}
+		if (rxon->flags & RXON_FLG_CCK_MSK) {
+			IL_WARN("check 5.2G: CCK!\n");
+			error = true;
+		}
+	}
+	if ((rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1) {
+		IL_WARN("mac/bssid mcast!\n");
+		error = true;
+	}
+
+	/* make sure basic rates 6Mbps and 1Mbps are supported */
+	if ((rxon->ofdm_basic_rates & RATE_6M_MASK) == 0 &&
+	    (rxon->cck_basic_rates & RATE_1M_MASK) == 0) {
+		IL_WARN("neither 1 nor 6 are basic\n");
+		error = true;
+	}
+
+	if (le16_to_cpu(rxon->assoc_id) > 2007) {
+		IL_WARN("aid > 2007\n");
+		error = true;
+	}
+
+	if ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) ==
+	    (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) {
+		IL_WARN("CCK and short slot\n");
+		error = true;
+	}
+
+	if ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) ==
+	    (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) {
+		IL_WARN("CCK and auto detect");
+		error = true;
+	}
+
+	if ((rxon->
+	     flags & (RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK)) ==
+	    RXON_FLG_TGG_PROTECT_MSK) {
+		IL_WARN("TGg but no auto-detect\n");
+		error = true;
+	}
+
+	if (error)
+		IL_WARN("Tuning to channel %d\n", le16_to_cpu(rxon->channel));
+
+	if (error) {
+		IL_ERR("Invalid RXON\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(il_check_rxon_cmd);
+
+/**
+ * il_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
+ * @il: staging_rxon is compared to active_rxon
+ *
+ * If the RXON structure is changing enough to require a new tune,
+ * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that
+ * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required.
+ */
+int
+il_full_rxon_required(struct il_priv *il, struct il_rxon_context *ctx)
+{
+	const struct il_rxon_cmd *staging = &ctx->staging;
+	const struct il_rxon_cmd *active = &ctx->active;
+
+#define CHK(cond)							\
+	if ((cond)) {							\
+		D_INFO("need full RXON - " #cond "\n");	\
+		return 1;						\
+	}
+
+#define CHK_NEQ(c1, c2)						\
+	if ((c1) != (c2)) {					\
+		D_INFO("need full RXON - "	\
+			       #c1 " != " #c2 " - %d != %d\n",	\
+			       (c1), (c2));			\
+		return 1;					\
+	}
+
+	/* These items are only settable from the full RXON command */
+	CHK(!il_is_associated_ctx(ctx));
+	CHK(compare_ether_addr(staging->bssid_addr, active->bssid_addr));
+	CHK(compare_ether_addr(staging->node_addr, active->node_addr));
+	CHK(compare_ether_addr
+	    (staging->wlap_bssid_addr, active->wlap_bssid_addr));
+	CHK_NEQ(staging->dev_type, active->dev_type);
+	CHK_NEQ(staging->channel, active->channel);
+	CHK_NEQ(staging->air_propagation, active->air_propagation);
+	CHK_NEQ(staging->ofdm_ht_single_stream_basic_rates,
+		active->ofdm_ht_single_stream_basic_rates);
+	CHK_NEQ(staging->ofdm_ht_dual_stream_basic_rates,
+		active->ofdm_ht_dual_stream_basic_rates);
+	CHK_NEQ(staging->assoc_id, active->assoc_id);
+
+	/* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can
+	 * be updated with the RXON_ASSOC command -- however only some
+	 * flag transitions are allowed using RXON_ASSOC */
+
+	/* Check if we are not switching bands */
+	CHK_NEQ(staging->flags & RXON_FLG_BAND_24G_MSK,
+		active->flags & RXON_FLG_BAND_24G_MSK);
+
+	/* Check if we are switching association toggle */
+	CHK_NEQ(staging->filter_flags & RXON_FILTER_ASSOC_MSK,
+		active->filter_flags & RXON_FILTER_ASSOC_MSK);
+
+#undef CHK
+#undef CHK_NEQ
+
+	return 0;
+}
+EXPORT_SYMBOL(il_full_rxon_required);
+
+u8
+il_get_lowest_plcp(struct il_priv *il, struct il_rxon_context *ctx)
+{
+	/*
+	 * Assign the lowest rate -- should really get this from
+	 * the beacon skb from mac80211.
+	 */
+	if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK)
+		return RATE_1M_PLCP;
+	else
+		return RATE_6M_PLCP;
+}
+EXPORT_SYMBOL(il_get_lowest_plcp);
+
+static void
+_il_set_rxon_ht(struct il_priv *il, struct il_ht_config *ht_conf,
+		struct il_rxon_context *ctx)
+{
+	struct il_rxon_cmd *rxon = &ctx->staging;
+
+	if (!ctx->ht.enabled) {
+		rxon->flags &=
+		    ~(RXON_FLG_CHANNEL_MODE_MSK |
+		      RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK | RXON_FLG_HT40_PROT_MSK
+		      | RXON_FLG_HT_PROT_MSK);
+		return;
+	}
+
+	rxon->flags |=
+	    cpu_to_le32(ctx->ht.protection << RXON_FLG_HT_OPERATING_MODE_POS);
+
+	/* Set up channel bandwidth:
+	 * 20 MHz only, 20/40 mixed or pure 40 if ht40 ok */
+	/* clear the HT channel mode before set the mode */
+	rxon->flags &=
+	    ~(RXON_FLG_CHANNEL_MODE_MSK | RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
+	if (il_is_ht40_tx_allowed(il, ctx, NULL)) {
+		/* pure ht40 */
+		if (ctx->ht.protection == IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) {
+			rxon->flags |= RXON_FLG_CHANNEL_MODE_PURE_40;
+			/* Note: control channel is opposite of extension channel */
+			switch (ctx->ht.extension_chan_offset) {
+			case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+				rxon->flags &=
+				    ~RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
+				break;
+			case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+				rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
+				break;
+			}
+		} else {
+			/* Note: control channel is opposite of extension channel */
+			switch (ctx->ht.extension_chan_offset) {
+			case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+				rxon->flags &=
+				    ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
+				rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED;
+				break;
+			case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+				rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
+				rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED;
+				break;
+			case IEEE80211_HT_PARAM_CHA_SEC_NONE:
+			default:
+				/* channel location only valid if in Mixed mode */
+				IL_ERR("invalid extension channel offset\n");
+				break;
+			}
+		}
+	} else {
+		rxon->flags |= RXON_FLG_CHANNEL_MODE_LEGACY;
+	}
+
+	if (il->cfg->ops->hcmd->set_rxon_chain)
+		il->cfg->ops->hcmd->set_rxon_chain(il, ctx);
+
+	D_ASSOC("rxon flags 0x%X operation mode :0x%X "
+		"extension channel offset 0x%x\n", le32_to_cpu(rxon->flags),
+		ctx->ht.protection, ctx->ht.extension_chan_offset);
+}
+
+void
+il_set_rxon_ht(struct il_priv *il, struct il_ht_config *ht_conf)
+{
+	_il_set_rxon_ht(il, ht_conf, &il->ctx);
+}
+EXPORT_SYMBOL(il_set_rxon_ht);
+
+/* Return valid, unused, channel for a passive scan to reset the RF */
+u8
+il_get_single_channel_number(struct il_priv *il, enum ieee80211_band band)
+{
+	const struct il_channel_info *ch_info;
+	int i;
+	u8 channel = 0;
+	u8 min, max;
+
+	if (band == IEEE80211_BAND_5GHZ) {
+		min = 14;
+		max = il->channel_count;
+	} else {
+		min = 0;
+		max = 14;
+	}
+
+	for (i = min; i < max; i++) {
+		channel = il->channel_info[i].channel;
+		if (channel == le16_to_cpu(il->ctx.staging.channel))
+			continue;
+
+		ch_info = il_get_channel_info(il, band, channel);
+		if (il_is_channel_valid(ch_info))
+			break;
+	}
+
+	return channel;
+}
+EXPORT_SYMBOL(il_get_single_channel_number);
+
+/**
+ * il_set_rxon_channel - Set the band and channel values in staging RXON
+ * @ch: requested channel as a pointer to struct ieee80211_channel
+
+ * NOTE:  Does not commit to the hardware; it sets appropriate bit fields
+ * in the staging RXON flag structure based on the ch->band
+ */
+int
+il_set_rxon_channel(struct il_priv *il, struct ieee80211_channel *ch,
+		    struct il_rxon_context *ctx)
+{
+	enum ieee80211_band band = ch->band;
+	u16 channel = ch->hw_value;
+
+	if (le16_to_cpu(ctx->staging.channel) == channel && il->band == band)
+		return 0;
+
+	ctx->staging.channel = cpu_to_le16(channel);
+	if (band == IEEE80211_BAND_5GHZ)
+		ctx->staging.flags &= ~RXON_FLG_BAND_24G_MSK;
+	else
+		ctx->staging.flags |= RXON_FLG_BAND_24G_MSK;
+
+	il->band = band;
+
+	D_INFO("Staging channel set to %d [%d]\n", channel, band);
+
+	return 0;
+}
+EXPORT_SYMBOL(il_set_rxon_channel);
+
+void
+il_set_flags_for_band(struct il_priv *il, struct il_rxon_context *ctx,
+		      enum ieee80211_band band, struct ieee80211_vif *vif)
+{
+	if (band == IEEE80211_BAND_5GHZ) {
+		ctx->staging.flags &=
+		    ~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK |
+		      RXON_FLG_CCK_MSK);
+		ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
+	} else {
+		/* Copied from il_post_associate() */
+		if (vif && vif->bss_conf.use_short_slot)
+			ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
+		else
+			ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
+
+		ctx->staging.flags |= RXON_FLG_BAND_24G_MSK;
+		ctx->staging.flags |= RXON_FLG_AUTO_DETECT_MSK;
+		ctx->staging.flags &= ~RXON_FLG_CCK_MSK;
+	}
+}
+EXPORT_SYMBOL(il_set_flags_for_band);
+
+/*
+ * initialize rxon structure with default values from eeprom
+ */
+void
+il_connection_init_rx_config(struct il_priv *il, struct il_rxon_context *ctx)
+{
+	const struct il_channel_info *ch_info;
+
+	memset(&ctx->staging, 0, sizeof(ctx->staging));
+
+	if (!ctx->vif) {
+		ctx->staging.dev_type = ctx->unused_devtype;
+	} else
+		switch (ctx->vif->type) {
+
+		case NL80211_IFTYPE_STATION:
+			ctx->staging.dev_type = ctx->station_devtype;
+			ctx->staging.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK;
+			break;
+
+		case NL80211_IFTYPE_ADHOC:
+			ctx->staging.dev_type = ctx->ibss_devtype;
+			ctx->staging.flags = RXON_FLG_SHORT_PREAMBLE_MSK;
+			ctx->staging.filter_flags =
+			    RXON_FILTER_BCON_AWARE_MSK |
+			    RXON_FILTER_ACCEPT_GRP_MSK;
+			break;
+
+		default:
+			IL_ERR("Unsupported interface type %d\n",
+			       ctx->vif->type);
+			break;
+		}
+
+#if 0
+	/* TODO:  Figure out when short_preamble would be set and cache from
+	 * that */
+	if (!hw_to_local(il->hw)->short_preamble)
+		ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+	else
+		ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
+#endif
+
+	ch_info =
+	    il_get_channel_info(il, il->band, le16_to_cpu(ctx->active.channel));
+
+	if (!ch_info)
+		ch_info = &il->channel_info[0];
+
+	ctx->staging.channel = cpu_to_le16(ch_info->channel);
+	il->band = ch_info->band;
+
+	il_set_flags_for_band(il, ctx, il->band, ctx->vif);
+
+	ctx->staging.ofdm_basic_rates =
+	    (IL_OFDM_RATES_MASK >> IL_FIRST_OFDM_RATE) & 0xFF;
+	ctx->staging.cck_basic_rates =
+	    (IL_CCK_RATES_MASK >> IL_FIRST_CCK_RATE) & 0xF;
+
+	/* clear both MIX and PURE40 mode flag */
+	ctx->staging.flags &=
+	    ~(RXON_FLG_CHANNEL_MODE_MIXED | RXON_FLG_CHANNEL_MODE_PURE_40);
+	if (ctx->vif)
+		memcpy(ctx->staging.node_addr, ctx->vif->addr, ETH_ALEN);
+
+	ctx->staging.ofdm_ht_single_stream_basic_rates = 0xff;
+	ctx->staging.ofdm_ht_dual_stream_basic_rates = 0xff;
+}
+EXPORT_SYMBOL(il_connection_init_rx_config);
+
+void
+il_set_rate(struct il_priv *il)
+{
+	const struct ieee80211_supported_band *hw = NULL;
+	struct ieee80211_rate *rate;
+	int i;
+
+	hw = il_get_hw_mode(il, il->band);
+	if (!hw) {
+		IL_ERR("Failed to set rate: unable to get hw mode\n");
+		return;
+	}
+
+	il->active_rate = 0;
+
+	for (i = 0; i < hw->n_bitrates; i++) {
+		rate = &(hw->bitrates[i]);
+		if (rate->hw_value < RATE_COUNT_LEGACY)
+			il->active_rate |= (1 << rate->hw_value);
+	}
+
+	D_RATE("Set active_rate = %0x\n", il->active_rate);
+
+	il->ctx.staging.cck_basic_rates =
+	    (IL_CCK_BASIC_RATES_MASK >> IL_FIRST_CCK_RATE) & 0xF;
+
+	il->ctx.staging.ofdm_basic_rates =
+	    (IL_OFDM_BASIC_RATES_MASK >> IL_FIRST_OFDM_RATE) & 0xFF;
+}
+EXPORT_SYMBOL(il_set_rate);
+
+void
+il_chswitch_done(struct il_priv *il, bool is_success)
+{
+	struct il_rxon_context *ctx = &il->ctx;
+
+	if (test_bit(S_EXIT_PENDING, &il->status))
+		return;
+
+	if (test_and_clear_bit(S_CHANNEL_SWITCH_PENDING, &il->status))
+		ieee80211_chswitch_done(ctx->vif, is_success);
+}
+EXPORT_SYMBOL(il_chswitch_done);
+
+void
+il_hdl_csa(struct il_priv *il, struct il_rx_buf *rxb)
+{
+	struct il_rx_pkt *pkt = rxb_addr(rxb);
+	struct il_csa_notification *csa = &(pkt->u.csa_notif);
+
+	struct il_rxon_context *ctx = &il->ctx;
+	struct il_rxon_cmd *rxon = (void *)&ctx->active;
+
+	if (!test_bit(S_CHANNEL_SWITCH_PENDING, &il->status))
+		return;
+
+	if (!le32_to_cpu(csa->status) && csa->channel == il->switch_channel) {
+		rxon->channel = csa->channel;
+		ctx->staging.channel = csa->channel;
+		D_11H("CSA notif: channel %d\n", le16_to_cpu(csa->channel));
+		il_chswitch_done(il, true);
+	} else {
+		IL_ERR("CSA notif (fail) : channel %d\n",
+		       le16_to_cpu(csa->channel));
+		il_chswitch_done(il, false);
+	}
+}
+EXPORT_SYMBOL(il_hdl_csa);
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+void
+il_print_rx_config_cmd(struct il_priv *il, struct il_rxon_context *ctx)
+{
+	struct il_rxon_cmd *rxon = &ctx->staging;
+
+	D_RADIO("RX CONFIG:\n");
+	il_print_hex_dump(il, IL_DL_RADIO, (u8 *) rxon, sizeof(*rxon));
+	D_RADIO("u16 channel: 0x%x\n", le16_to_cpu(rxon->channel));
+	D_RADIO("u32 flags: 0x%08X\n", le32_to_cpu(rxon->flags));
+	D_RADIO("u32 filter_flags: 0x%08x\n", le32_to_cpu(rxon->filter_flags));
+	D_RADIO("u8 dev_type: 0x%x\n", rxon->dev_type);
+	D_RADIO("u8 ofdm_basic_rates: 0x%02x\n", rxon->ofdm_basic_rates);
+	D_RADIO("u8 cck_basic_rates: 0x%02x\n", rxon->cck_basic_rates);
+	D_RADIO("u8[6] node_addr: %pM\n", rxon->node_addr);
+	D_RADIO("u8[6] bssid_addr: %pM\n", rxon->bssid_addr);
+	D_RADIO("u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id));
+}
+EXPORT_SYMBOL(il_print_rx_config_cmd);
+#endif
+/**
+ * il_irq_handle_error - called for HW or SW error interrupt from card
+ */
+void
+il_irq_handle_error(struct il_priv *il)
+{
+	/* Set the FW error flag -- cleared on il_down */
+	set_bit(S_FW_ERROR, &il->status);
+
+	/* Cancel currently queued command. */
+	clear_bit(S_HCMD_ACTIVE, &il->status);
+
+	IL_ERR("Loaded firmware version: %s\n", il->hw->wiphy->fw_version);
+
+	il->cfg->ops->lib->dump_nic_error_log(il);
+	if (il->cfg->ops->lib->dump_fh)
+		il->cfg->ops->lib->dump_fh(il, NULL, false);
+#ifdef CONFIG_IWLEGACY_DEBUG
+	if (il_get_debug_level(il) & IL_DL_FW_ERRORS)
+		il_print_rx_config_cmd(il, &il->ctx);
+#endif
+
+	wake_up(&il->wait_command_queue);
+
+	/* Keep the restart process from trying to send host
+	 * commands by clearing the INIT status bit */
+	clear_bit(S_READY, &il->status);
+
+	if (!test_bit(S_EXIT_PENDING, &il->status)) {
+		IL_DBG(IL_DL_FW_ERRORS,
+		       "Restarting adapter due to uCode error.\n");
+
+		if (il->cfg->mod_params->restart_fw)
+			queue_work(il->workqueue, &il->restart);
+	}
+}
+EXPORT_SYMBOL(il_irq_handle_error);
+
+static int
+il_apm_stop_master(struct il_priv *il)
+{
+	int ret = 0;
+
+	/* stop device's busmaster DMA activity */
+	il_set_bit(il, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
+
+	ret =
+	    _il_poll_bit(il, CSR_RESET, CSR_RESET_REG_FLAG_MASTER_DISABLED,
+			 CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
+	if (ret)
+		IL_WARN("Master Disable Timed Out, 100 usec\n");
+
+	D_INFO("stop master\n");
+
+	return ret;
+}
+
+void
+il_apm_stop(struct il_priv *il)
+{
+	D_INFO("Stop card, put in low power state\n");
+
+	/* Stop device's DMA activity */
+	il_apm_stop_master(il);
+
+	/* Reset the entire device */
+	il_set_bit(il, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
+
+	udelay(10);
+
+	/*
+	 * Clear "initialization complete" bit to move adapter from
+	 * D0A* (powered-up Active) --> D0U* (Uninitialized) state.
+	 */
+	il_clear_bit(il, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+}
+EXPORT_SYMBOL(il_apm_stop);
+
+/*
+ * Start up NIC's basic functionality after it has been reset
+ * (e.g. after platform boot, or shutdown via il_apm_stop())
+ * NOTE:  This does not load uCode nor start the embedded processor
+ */
+int
+il_apm_init(struct il_priv *il)
+{
+	int ret = 0;
+	u16 lctl;
+
+	D_INFO("Init card's basic functions\n");
+
+	/*
+	 * Use "set_bit" below rather than "write", to preserve any hardware
+	 * bits already set by default after reset.
+	 */
+
+	/* Disable L0S exit timer (platform NMI Work/Around) */
+	il_set_bit(il, CSR_GIO_CHICKEN_BITS,
+		   CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
+
+	/*
+	 * Disable L0s without affecting L1;
+	 *  don't wait for ICH L0s (ICH bug W/A)
+	 */
+	il_set_bit(il, CSR_GIO_CHICKEN_BITS,
+		   CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
+
+	/* Set FH wait threshold to maximum (HW error during stress W/A) */
+	il_set_bit(il, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL);
+
+	/*
+	 * Enable HAP INTA (interrupt from management bus) to
+	 * wake device's PCI Express link L1a -> L0s
+	 * NOTE:  This is no-op for 3945 (non-existent bit)
+	 */
+	il_set_bit(il, CSR_HW_IF_CONFIG_REG,
+		   CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A);
+
+	/*
+	 * HW bug W/A for instability in PCIe bus L0->L0S->L1 transition.
+	 * Check if BIOS (or OS) enabled L1-ASPM on this device.
+	 * If so (likely), disable L0S, so device moves directly L0->L1;
+	 *    costs negligible amount of power savings.
+	 * If not (unlikely), enable L0S, so there is at least some
+	 *    power savings, even without L1.
+	 */
+	if (il->cfg->base_params->set_l0s) {
+		lctl = il_pcie_link_ctl(il);
+		if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) ==
+		    PCI_CFG_LINK_CTRL_VAL_L1_EN) {
+			/* L1-ASPM enabled; disable(!) L0S  */
+			il_set_bit(il, CSR_GIO_REG,
+				   CSR_GIO_REG_VAL_L0S_ENABLED);
+			D_POWER("L1 Enabled; Disabling L0S\n");
+		} else {
+			/* L1-ASPM disabled; enable(!) L0S */
+			il_clear_bit(il, CSR_GIO_REG,
+				     CSR_GIO_REG_VAL_L0S_ENABLED);
+			D_POWER("L1 Disabled; Enabling L0S\n");
+		}
+	}
+
+	/* Configure analog phase-lock-loop before activating to D0A */
+	if (il->cfg->base_params->pll_cfg_val)
+		il_set_bit(il, CSR_ANA_PLL_CFG,
+			   il->cfg->base_params->pll_cfg_val);
+
+	/*
+	 * Set "initialization complete" bit to move adapter from
+	 * D0U* --> D0A* (powered-up active) state.
+	 */
+	il_set_bit(il, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+
+	/*
+	 * Wait for clock stabilization; once stabilized, access to
+	 * device-internal resources is supported, e.g. il_wr_prph()
+	 * and accesses to uCode SRAM.
+	 */
+	ret =
+	    _il_poll_bit(il, CSR_GP_CNTRL,
+			 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
+			 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
+	if (ret < 0) {
+		D_INFO("Failed to init the card\n");
+		goto out;
+	}
+
+	/*
+	 * Enable DMA and BSM (if used) clocks, wait for them to stabilize.
+	 * BSM (Boostrap State Machine) is only in 3945 and 4965.
+	 *
+	 * Write to "CLK_EN_REG"; "1" bits enable clocks, while "0" bits
+	 * do not disable clocks.  This preserves any hardware bits already
+	 * set by default in "CLK_CTRL_REG" after reset.
+	 */
+	if (il->cfg->base_params->use_bsm)
+		il_wr_prph(il, APMG_CLK_EN_REG,
+			   APMG_CLK_VAL_DMA_CLK_RQT | APMG_CLK_VAL_BSM_CLK_RQT);
+	else
+		il_wr_prph(il, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT);
+	udelay(20);
+
+	/* Disable L1-Active */
+	il_set_bits_prph(il, APMG_PCIDEV_STT_REG,
+			 APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL(il_apm_init);
+
+int
+il_set_tx_power(struct il_priv *il, s8 tx_power, bool force)
+{
+	int ret;
+	s8 prev_tx_power;
+	bool defer;
+	struct il_rxon_context *ctx = &il->ctx;
+
+	lockdep_assert_held(&il->mutex);
+
+	if (il->tx_power_user_lmt == tx_power && !force)
+		return 0;
+
+	if (!il->cfg->ops->lib->send_tx_power)
+		return -EOPNOTSUPP;
+
+	/* 0 dBm mean 1 milliwatt */
+	if (tx_power < 0) {
+		IL_WARN("Requested user TXPOWER %d below 1 mW.\n", tx_power);
+		return -EINVAL;
+	}
+
+	if (tx_power > il->tx_power_device_lmt) {
+		IL_WARN("Requested user TXPOWER %d above upper limit %d.\n",
+			tx_power, il->tx_power_device_lmt);
+		return -EINVAL;
+	}
+
+	if (!il_is_ready_rf(il))
+		return -EIO;
+
+	/* scan complete and commit_rxon use tx_power_next value,
+	 * it always need to be updated for newest request */
+	il->tx_power_next = tx_power;
+
+	/* do not set tx power when scanning or channel changing */
+	defer = test_bit(S_SCANNING, &il->status) ||
+	    memcmp(&ctx->active, &ctx->staging, sizeof(ctx->staging));
+	if (defer && !force) {
+		D_INFO("Deferring tx power set\n");
+		return 0;
+	}
+
+	prev_tx_power = il->tx_power_user_lmt;
+	il->tx_power_user_lmt = tx_power;
+
+	ret = il->cfg->ops->lib->send_tx_power(il);
+
+	/* if fail to set tx_power, restore the orig. tx power */
+	if (ret) {
+		il->tx_power_user_lmt = prev_tx_power;
+		il->tx_power_next = prev_tx_power;
+	}
+	return ret;
+}
+EXPORT_SYMBOL(il_set_tx_power);
+
+void
+il_send_bt_config(struct il_priv *il)
+{
+	struct il_bt_cmd bt_cmd = {
+		.lead_time = BT_LEAD_TIME_DEF,
+		.max_kill = BT_MAX_KILL_DEF,
+		.kill_ack_mask = 0,
+		.kill_cts_mask = 0,
+	};
+
+	if (!bt_coex_active)
+		bt_cmd.flags = BT_COEX_DISABLE;
+	else
+		bt_cmd.flags = BT_COEX_ENABLE;
+
+	D_INFO("BT coex %s\n",
+	       (bt_cmd.flags == BT_COEX_DISABLE) ? "disable" : "active");
+
+	if (il_send_cmd_pdu(il, C_BT_CONFIG, sizeof(struct il_bt_cmd), &bt_cmd))
+		IL_ERR("failed to send BT Coex Config\n");
+}
+EXPORT_SYMBOL(il_send_bt_config);
+
+int
+il_send_stats_request(struct il_priv *il, u8 flags, bool clear)
+{
+	struct il_stats_cmd stats_cmd = {
+		.configuration_flags = clear ? IL_STATS_CONF_CLEAR_STATS : 0,
+	};
+
+	if (flags & CMD_ASYNC)
+		return il_send_cmd_pdu_async(il, C_STATS, sizeof(struct il_stats_cmd),
+					     &stats_cmd, NULL);
+	else
+		return il_send_cmd_pdu(il, C_STATS, sizeof(struct il_stats_cmd),
+				       &stats_cmd);
+}
+EXPORT_SYMBOL(il_send_stats_request);
+
+void
+il_hdl_pm_sleep(struct il_priv *il, struct il_rx_buf *rxb)
+{
+#ifdef CONFIG_IWLEGACY_DEBUG
+	struct il_rx_pkt *pkt = rxb_addr(rxb);
+	struct il_sleep_notification *sleep = &(pkt->u.sleep_notif);
+	D_RX("sleep mode: %d, src: %d\n",
+	     sleep->pm_sleep_mode, sleep->pm_wakeup_src);
+#endif
+}
+EXPORT_SYMBOL(il_hdl_pm_sleep);
+
+void
+il_hdl_pm_debug_stats(struct il_priv *il, struct il_rx_buf *rxb)
+{
+	struct il_rx_pkt *pkt = rxb_addr(rxb);
+	u32 len = le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK;
+	D_RADIO("Dumping %d bytes of unhandled notification for %s:\n", len,
+		il_get_cmd_string(pkt->hdr.cmd));
+	il_print_hex_dump(il, IL_DL_RADIO, pkt->u.raw, len);
+}
+EXPORT_SYMBOL(il_hdl_pm_debug_stats);
+
+void
+il_hdl_error(struct il_priv *il, struct il_rx_buf *rxb)
+{
+	struct il_rx_pkt *pkt = rxb_addr(rxb);
+
+	IL_ERR("Error Reply type 0x%08X cmd %s (0x%02X) "
+	       "seq 0x%04X ser 0x%08X\n",
+	       le32_to_cpu(pkt->u.err_resp.error_type),
+	       il_get_cmd_string(pkt->u.err_resp.cmd_id),
+	       pkt->u.err_resp.cmd_id,
+	       le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num),
+	       le32_to_cpu(pkt->u.err_resp.error_info));
+}
+EXPORT_SYMBOL(il_hdl_error);
+
+void
+il_clear_isr_stats(struct il_priv *il)
+{
+	memset(&il->isr_stats, 0, sizeof(il->isr_stats));
+}
+
+int
+il_mac_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue,
+	       const struct ieee80211_tx_queue_params *params)
+{
+	struct il_priv *il = hw->priv;
+	unsigned long flags;
+	int q;
+
+	D_MAC80211("enter\n");
+
+	if (!il_is_ready_rf(il)) {
+		D_MAC80211("leave - RF not ready\n");
+		return -EIO;
+	}
+
+	if (queue >= AC_NUM) {
+		D_MAC80211("leave - queue >= AC_NUM %d\n", queue);
+		return 0;
+	}
+
+	q = AC_NUM - 1 - queue;
+
+	spin_lock_irqsave(&il->lock, flags);
+
+	il->ctx.qos_data.def_qos_parm.ac[q].cw_min =
+	    cpu_to_le16(params->cw_min);
+	il->ctx.qos_data.def_qos_parm.ac[q].cw_max =
+	    cpu_to_le16(params->cw_max);
+	il->ctx.qos_data.def_qos_parm.ac[q].aifsn = params->aifs;
+	il->ctx.qos_data.def_qos_parm.ac[q].edca_txop =
+	    cpu_to_le16((params->txop * 32));
+
+	il->ctx.qos_data.def_qos_parm.ac[q].reserved1 = 0;
+
+	spin_unlock_irqrestore(&il->lock, flags);
+
+	D_MAC80211("leave\n");
+	return 0;
+}
+EXPORT_SYMBOL(il_mac_conf_tx);
+
+int
+il_mac_tx_last_beacon(struct ieee80211_hw *hw)
+{
+	struct il_priv *il = hw->priv;
+
+	return il->ibss_manager == IL_IBSS_MANAGER;
+}
+EXPORT_SYMBOL_GPL(il_mac_tx_last_beacon);
+
+static int
+il_set_mode(struct il_priv *il, struct il_rxon_context *ctx)
+{
+	il_connection_init_rx_config(il, ctx);
+
+	if (il->cfg->ops->hcmd->set_rxon_chain)
+		il->cfg->ops->hcmd->set_rxon_chain(il, ctx);
+
+	return il_commit_rxon(il, ctx);
+}
+
+static int
+il_setup_interface(struct il_priv *il, struct il_rxon_context *ctx)
+{
+	struct ieee80211_vif *vif = ctx->vif;
+	int err;
+
+	lockdep_assert_held(&il->mutex);
+
+	/*
+	 * This variable will be correct only when there's just
+	 * a single context, but all code using it is for hardware
+	 * that supports only one context.
+	 */
+	il->iw_mode = vif->type;
+
+	ctx->is_active = true;
+
+	err = il_set_mode(il, ctx);
+	if (err) {
+		if (!ctx->always_active)
+			ctx->is_active = false;
+		return err;
+	}
+
+	return 0;
+}
+
+int
+il_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+	struct il_priv *il = hw->priv;
+	struct il_vif_priv *vif_priv = (void *)vif->drv_priv;
+	int err;
+	u32 modes;
+
+	D_MAC80211("enter: type %d, addr %pM\n", vif->type, vif->addr);
+
+	mutex_lock(&il->mutex);
+
+	if (!il_is_ready_rf(il)) {
+		IL_WARN("Try to add interface when device not ready\n");
+		err = -EINVAL;
+		goto out;
+	}
+
+	/* check if busy context is exclusive */
+	if (il->ctx.vif &&
+	    (il->ctx.exclusive_interface_modes & BIT(il->ctx.vif->type))) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	modes = il->ctx.interface_modes | il->ctx.exclusive_interface_modes;
+	if (!(modes & BIT(vif->type))) {
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
+	vif_priv->ctx = &il->ctx;
+	il->ctx.vif = vif;
+
+	err = il_setup_interface(il, &il->ctx);
+	if (err) {
+		il->ctx.vif = NULL;
+		il->iw_mode = NL80211_IFTYPE_STATION;
+	}
+
+out:
+	mutex_unlock(&il->mutex);
+
+	D_MAC80211("leave\n");
+	return err;
+}
+EXPORT_SYMBOL(il_mac_add_interface);
+
+static void
+il_teardown_interface(struct il_priv *il, struct ieee80211_vif *vif,
+		      bool mode_change)
+{
+	struct il_rxon_context *ctx = il_rxon_ctx_from_vif(vif);
+
+	lockdep_assert_held(&il->mutex);
+
+	if (il->scan_vif == vif) {
+		il_scan_cancel_timeout(il, 200);
+		il_force_scan_end(il);
+	}
+
+	if (!mode_change) {
+		il_set_mode(il, ctx);
+		if (!ctx->always_active)
+			ctx->is_active = false;
+	}
+}
+
+void
+il_mac_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+	struct il_priv *il = hw->priv;
+	struct il_rxon_context *ctx = il_rxon_ctx_from_vif(vif);
+
+	D_MAC80211("enter\n");
+
+	mutex_lock(&il->mutex);
+
+	WARN_ON(ctx->vif != vif);
+	ctx->vif = NULL;
+
+	il_teardown_interface(il, vif, false);
+
+	memset(il->bssid, 0, ETH_ALEN);
+	mutex_unlock(&il->mutex);
+
+	D_MAC80211("leave\n");
+
+}
+EXPORT_SYMBOL(il_mac_remove_interface);
+
+int
+il_alloc_txq_mem(struct il_priv *il)
+{
+	if (!il->txq)
+		il->txq =
+		    kzalloc(sizeof(struct il_tx_queue) *
+			    il->cfg->base_params->num_of_queues, GFP_KERNEL);
+	if (!il->txq) {
+		IL_ERR("Not enough memory for txq\n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(il_alloc_txq_mem);
+
+void
+il_txq_mem(struct il_priv *il)
+{
+	kfree(il->txq);
+	il->txq = NULL;
+}
+EXPORT_SYMBOL(il_txq_mem);
+
+#ifdef CONFIG_IWLEGACY_DEBUGFS
+
+#define IL_TRAFFIC_DUMP_SIZE	(IL_TRAFFIC_ENTRY_SIZE * IL_TRAFFIC_ENTRIES)
+
+void
+il_reset_traffic_log(struct il_priv *il)
+{
+	il->tx_traffic_idx = 0;
+	il->rx_traffic_idx = 0;
+	if (il->tx_traffic)
+		memset(il->tx_traffic, 0, IL_TRAFFIC_DUMP_SIZE);
+	if (il->rx_traffic)
+		memset(il->rx_traffic, 0, IL_TRAFFIC_DUMP_SIZE);
+}
+
+int
+il_alloc_traffic_mem(struct il_priv *il)
+{
+	u32 traffic_size = IL_TRAFFIC_DUMP_SIZE;
+
+	if (il_debug_level & IL_DL_TX) {
+		if (!il->tx_traffic) {
+			il->tx_traffic = kzalloc(traffic_size, GFP_KERNEL);
+			if (!il->tx_traffic)
+				return -ENOMEM;
+		}
+	}
+	if (il_debug_level & IL_DL_RX) {
+		if (!il->rx_traffic) {
+			il->rx_traffic = kzalloc(traffic_size, GFP_KERNEL);
+			if (!il->rx_traffic)
+				return -ENOMEM;
+		}
+	}
+	il_reset_traffic_log(il);
+	return 0;
+}
+EXPORT_SYMBOL(il_alloc_traffic_mem);
+
+void
+il_free_traffic_mem(struct il_priv *il)
+{
+	kfree(il->tx_traffic);
+	il->tx_traffic = NULL;
+
+	kfree(il->rx_traffic);
+	il->rx_traffic = NULL;
+}
+EXPORT_SYMBOL(il_free_traffic_mem);
+
+void
+il_dbg_log_tx_data_frame(struct il_priv *il, u16 length,
+			 struct ieee80211_hdr *header)
+{
+	__le16 fc;
+	u16 len;
+
+	if (likely(!(il_debug_level & IL_DL_TX)))
+		return;
+
+	if (!il->tx_traffic)
+		return;
+
+	fc = header->frame_control;
+	if (ieee80211_is_data(fc)) {
+		len =
+		    (length >
+		     IL_TRAFFIC_ENTRY_SIZE) ? IL_TRAFFIC_ENTRY_SIZE : length;
+		memcpy((il->tx_traffic +
+			(il->tx_traffic_idx * IL_TRAFFIC_ENTRY_SIZE)), header,
+		       len);
+		il->tx_traffic_idx =
+		    (il->tx_traffic_idx + 1) % IL_TRAFFIC_ENTRIES;
+	}
+}
+EXPORT_SYMBOL(il_dbg_log_tx_data_frame);
+
+void
+il_dbg_log_rx_data_frame(struct il_priv *il, u16 length,
+			 struct ieee80211_hdr *header)
+{
+	__le16 fc;
+	u16 len;
+
+	if (likely(!(il_debug_level & IL_DL_RX)))
+		return;
+
+	if (!il->rx_traffic)
+		return;
+
+	fc = header->frame_control;
+	if (ieee80211_is_data(fc)) {
+		len =
+		    (length >
+		     IL_TRAFFIC_ENTRY_SIZE) ? IL_TRAFFIC_ENTRY_SIZE : length;
+		memcpy((il->rx_traffic +
+			(il->rx_traffic_idx * IL_TRAFFIC_ENTRY_SIZE)), header,
+		       len);
+		il->rx_traffic_idx =
+		    (il->rx_traffic_idx + 1) % IL_TRAFFIC_ENTRIES;
+	}
+}
+EXPORT_SYMBOL(il_dbg_log_rx_data_frame);
+
+const char *
+il_get_mgmt_string(int cmd)
+{
+	switch (cmd) {
+		IL_CMD(MANAGEMENT_ASSOC_REQ);
+		IL_CMD(MANAGEMENT_ASSOC_RESP);
+		IL_CMD(MANAGEMENT_REASSOC_REQ);
+		IL_CMD(MANAGEMENT_REASSOC_RESP);
+		IL_CMD(MANAGEMENT_PROBE_REQ);
+		IL_CMD(MANAGEMENT_PROBE_RESP);
+		IL_CMD(MANAGEMENT_BEACON);
+		IL_CMD(MANAGEMENT_ATIM);
+		IL_CMD(MANAGEMENT_DISASSOC);
+		IL_CMD(MANAGEMENT_AUTH);
+		IL_CMD(MANAGEMENT_DEAUTH);
+		IL_CMD(MANAGEMENT_ACTION);
+	default:
+		return "UNKNOWN";
+
+	}
+}
+
+const char *
+il_get_ctrl_string(int cmd)
+{
+	switch (cmd) {
+		IL_CMD(CONTROL_BACK_REQ);
+		IL_CMD(CONTROL_BACK);
+		IL_CMD(CONTROL_PSPOLL);
+		IL_CMD(CONTROL_RTS);
+		IL_CMD(CONTROL_CTS);
+		IL_CMD(CONTROL_ACK);
+		IL_CMD(CONTROL_CFEND);
+		IL_CMD(CONTROL_CFENDACK);
+	default:
+		return "UNKNOWN";
+
+	}
+}
+
+void
+il_clear_traffic_stats(struct il_priv *il)
+{
+	memset(&il->tx_stats, 0, sizeof(struct traffic_stats));
+	memset(&il->rx_stats, 0, sizeof(struct traffic_stats));
+}
+
+/*
+ * if CONFIG_IWLEGACY_DEBUGFS defined,
+ * il_update_stats function will
+ * record all the MGMT, CTRL and DATA pkt for both TX and Rx pass
+ * Use debugFs to display the rx/rx_stats
+ * if CONFIG_IWLEGACY_DEBUGFS not being defined, then no MGMT and CTRL
+ * information will be recorded, but DATA pkt still will be recorded
+ * for the reason of il_led.c need to control the led blinking based on
+ * number of tx and rx data.
+ *
+ */
+void
+il_update_stats(struct il_priv *il, bool is_tx, __le16 fc, u16 len)
+{
+	struct traffic_stats *stats;
+
+	if (is_tx)
+		stats = &il->tx_stats;
+	else
+		stats = &il->rx_stats;
+
+	if (ieee80211_is_mgmt(fc)) {
+		switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
+		case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ):
+			stats->mgmt[MANAGEMENT_ASSOC_REQ]++;
+			break;
+		case cpu_to_le16(IEEE80211_STYPE_ASSOC_RESP):
+			stats->mgmt[MANAGEMENT_ASSOC_RESP]++;
+			break;
+		case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ):
+			stats->mgmt[MANAGEMENT_REASSOC_REQ]++;
+			break;
+		case cpu_to_le16(IEEE80211_STYPE_REASSOC_RESP):
+			stats->mgmt[MANAGEMENT_REASSOC_RESP]++;
+			break;
+		case cpu_to_le16(IEEE80211_STYPE_PROBE_REQ):
+			stats->mgmt[MANAGEMENT_PROBE_REQ]++;
+			break;
+		case cpu_to_le16(IEEE80211_STYPE_PROBE_RESP):
+			stats->mgmt[MANAGEMENT_PROBE_RESP]++;
+			break;
+		case cpu_to_le16(IEEE80211_STYPE_BEACON):
+			stats->mgmt[MANAGEMENT_BEACON]++;
+			break;
+		case cpu_to_le16(IEEE80211_STYPE_ATIM):
+			stats->mgmt[MANAGEMENT_ATIM]++;
+			break;
+		case cpu_to_le16(IEEE80211_STYPE_DISASSOC):
+			stats->mgmt[MANAGEMENT_DISASSOC]++;
+			break;
+		case cpu_to_le16(IEEE80211_STYPE_AUTH):
+			stats->mgmt[MANAGEMENT_AUTH]++;
+			break;
+		case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
+			stats->mgmt[MANAGEMENT_DEAUTH]++;
+			break;
+		case cpu_to_le16(IEEE80211_STYPE_ACTION):
+			stats->mgmt[MANAGEMENT_ACTION]++;
+			break;
+		}
+	} else if (ieee80211_is_ctl(fc)) {
+		switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
+		case cpu_to_le16(IEEE80211_STYPE_BACK_REQ):
+			stats->ctrl[CONTROL_BACK_REQ]++;
+			break;
+		case cpu_to_le16(IEEE80211_STYPE_BACK):
+			stats->ctrl[CONTROL_BACK]++;
+			break;
+		case cpu_to_le16(IEEE80211_STYPE_PSPOLL):
+			stats->ctrl[CONTROL_PSPOLL]++;
+			break;
+		case cpu_to_le16(IEEE80211_STYPE_RTS):
+			stats->ctrl[CONTROL_RTS]++;
+			break;
+		case cpu_to_le16(IEEE80211_STYPE_CTS):
+			stats->ctrl[CONTROL_CTS]++;
+			break;
+		case cpu_to_le16(IEEE80211_STYPE_ACK):
+			stats->ctrl[CONTROL_ACK]++;
+			break;
+		case cpu_to_le16(IEEE80211_STYPE_CFEND):
+			stats->ctrl[CONTROL_CFEND]++;
+			break;
+		case cpu_to_le16(IEEE80211_STYPE_CFENDACK):
+			stats->ctrl[CONTROL_CFENDACK]++;
+			break;
+		}
+	} else {
+		/* data */
+		stats->data_cnt++;
+		stats->data_bytes += len;
+	}
+}
+EXPORT_SYMBOL(il_update_stats);
+#endif
+
+int
+il_force_reset(struct il_priv *il, bool external)
+{
+	struct il_force_reset *force_reset;
+
+	if (test_bit(S_EXIT_PENDING, &il->status))
+		return -EINVAL;
+
+	force_reset = &il->force_reset;
+	force_reset->reset_request_count++;
+	if (!external) {
+		if (force_reset->last_force_reset_jiffies &&
+		    time_after(force_reset->last_force_reset_jiffies +
+			       force_reset->reset_duration, jiffies)) {
+			D_INFO("force reset rejected\n");
+			force_reset->reset_reject_count++;
+			return -EAGAIN;
+		}
+	}
+	force_reset->reset_success_count++;
+	force_reset->last_force_reset_jiffies = jiffies;
+
+	/*
+	 * if the request is from external(ex: debugfs),
+	 * then always perform the request in regardless the module
+	 * parameter setting
+	 * if the request is from internal (uCode error or driver
+	 * detect failure), then fw_restart module parameter
+	 * need to be check before performing firmware reload
+	 */
+
+	if (!external && !il->cfg->mod_params->restart_fw) {
+		D_INFO("Cancel firmware reload based on "
+		       "module parameter setting\n");
+		return 0;
+	}
+
+	IL_ERR("On demand firmware reload\n");
+
+	/* Set the FW error flag -- cleared on il_down */
+	set_bit(S_FW_ERROR, &il->status);
+	wake_up(&il->wait_command_queue);
+	/*
+	 * Keep the restart process from trying to send host
+	 * commands by clearing the INIT status bit
+	 */
+	clear_bit(S_READY, &il->status);
+	queue_work(il->workqueue, &il->restart);
+
+	return 0;
+}
+
+int
+il_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			enum nl80211_iftype newtype, bool newp2p)
+{
+	struct il_priv *il = hw->priv;
+	struct il_rxon_context *ctx = il_rxon_ctx_from_vif(vif);
+	u32 modes;
+	int err;
+
+	newtype = ieee80211_iftype_p2p(newtype, newp2p);
+
+	mutex_lock(&il->mutex);
+
+	if (!ctx->vif || !il_is_ready_rf(il)) {
+		/*
+		 * Huh? But wait ... this can maybe happen when
+		 * we're in the middle of a firmware restart!
+		 */
+		err = -EBUSY;
+		goto out;
+	}
+
+	modes = ctx->interface_modes | ctx->exclusive_interface_modes;
+	if (!(modes & BIT(newtype))) {
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
+	if ((il->ctx.exclusive_interface_modes & BIT(il->ctx.vif->type)) ||
+	    (il->ctx.exclusive_interface_modes & BIT(newtype))) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	/* success */
+	il_teardown_interface(il, vif, true);
+	vif->type = newtype;
+	vif->p2p = newp2p;
+	err = il_setup_interface(il, ctx);
+	WARN_ON(err);
+	/*
+	 * We've switched internally, but submitting to the
+	 * device may have failed for some reason. Mask this
+	 * error, because otherwise mac80211 will not switch
+	 * (and set the interface type back) and we'll be
+	 * out of sync with it.
+	 */
+	err = 0;
+
+out:
+	mutex_unlock(&il->mutex);
+	return err;
+}
+EXPORT_SYMBOL(il_mac_change_interface);
+
+/*
+ * On every watchdog tick we check (latest) time stamp. If it does not
+ * change during timeout period and queue is not empty we reset firmware.
+ */
+static int
+il_check_stuck_queue(struct il_priv *il, int cnt)
+{
+	struct il_tx_queue *txq = &il->txq[cnt];
+	struct il_queue *q = &txq->q;
+	unsigned long timeout;
+	int ret;
+
+	if (q->read_ptr == q->write_ptr) {
+		txq->time_stamp = jiffies;
+		return 0;
+	}
+
+	timeout =
+	    txq->time_stamp +
+	    msecs_to_jiffies(il->cfg->base_params->wd_timeout);
+
+	if (time_after(jiffies, timeout)) {
+		IL_ERR("Queue %d stuck for %u ms.\n", q->id,
+		       il->cfg->base_params->wd_timeout);
+		ret = il_force_reset(il, false);
+		return (ret == -EAGAIN) ? 0 : 1;
+	}
+
+	return 0;
+}
+
+/*
+ * Making watchdog tick be a quarter of timeout assure we will
+ * discover the queue hung between timeout and 1.25*timeout
+ */
+#define IL_WD_TICK(timeout) ((timeout) / 4)
+
+/*
+ * Watchdog timer callback, we check each tx queue for stuck, if if hung
+ * we reset the firmware. If everything is fine just rearm the timer.
+ */
+void
+il_bg_watchdog(unsigned long data)
+{
+	struct il_priv *il = (struct il_priv *)data;
+	int cnt;
+	unsigned long timeout;
+
+	if (test_bit(S_EXIT_PENDING, &il->status))
+		return;
+
+	timeout = il->cfg->base_params->wd_timeout;
+	if (timeout == 0)
+		return;
+
+	/* monitor and check for stuck cmd queue */
+	if (il_check_stuck_queue(il, il->cmd_queue))
+		return;
+
+	/* monitor and check for other stuck queues */
+	if (il_is_any_associated(il)) {
+		for (cnt = 0; cnt < il->hw_params.max_txq_num; cnt++) {
+			/* skip as we already checked the command queue */
+			if (cnt == il->cmd_queue)
+				continue;
+			if (il_check_stuck_queue(il, cnt))
+				return;
+		}
+	}
+
+	mod_timer(&il->watchdog,
+		  jiffies + msecs_to_jiffies(IL_WD_TICK(timeout)));
+}
+EXPORT_SYMBOL(il_bg_watchdog);
+
+void
+il_setup_watchdog(struct il_priv *il)
+{
+	unsigned int timeout = il->cfg->base_params->wd_timeout;
+
+	if (timeout)
+		mod_timer(&il->watchdog,
+			  jiffies + msecs_to_jiffies(IL_WD_TICK(timeout)));
+	else
+		del_timer(&il->watchdog);
+}
+EXPORT_SYMBOL(il_setup_watchdog);
+
+/*
+ * extended beacon time format
+ * time in usec will be changed into a 32-bit value in extended:internal format
+ * the extended part is the beacon counts
+ * the internal part is the time in usec within one beacon interval
+ */
+u32
+il_usecs_to_beacons(struct il_priv *il, u32 usec, u32 beacon_interval)
+{
+	u32 quot;
+	u32 rem;
+	u32 interval = beacon_interval * TIME_UNIT;
+
+	if (!interval || !usec)
+		return 0;
+
+	quot =
+	    (usec /
+	     interval) & (il_beacon_time_mask_high(il,
+						   il->hw_params.
+						   beacon_time_tsf_bits) >> il->
+			  hw_params.beacon_time_tsf_bits);
+	rem =
+	    (usec % interval) & il_beacon_time_mask_low(il,
+							il->hw_params.
+							beacon_time_tsf_bits);
+
+	return (quot << il->hw_params.beacon_time_tsf_bits) + rem;
+}
+EXPORT_SYMBOL(il_usecs_to_beacons);
+
+/* base is usually what we get from ucode with each received frame,
+ * the same as HW timer counter counting down
+ */
+__le32
+il_add_beacon_time(struct il_priv *il, u32 base, u32 addon,
+		   u32 beacon_interval)
+{
+	u32 base_low = base & il_beacon_time_mask_low(il,
+						      il->hw_params.
+						      beacon_time_tsf_bits);
+	u32 addon_low = addon & il_beacon_time_mask_low(il,
+							il->hw_params.
+							beacon_time_tsf_bits);
+	u32 interval = beacon_interval * TIME_UNIT;
+	u32 res = (base & il_beacon_time_mask_high(il,
+						   il->hw_params.
+						   beacon_time_tsf_bits)) +
+	    (addon & il_beacon_time_mask_high(il,
+					      il->hw_params.
+					      beacon_time_tsf_bits));
+
+	if (base_low > addon_low)
+		res += base_low - addon_low;
+	else if (base_low < addon_low) {
+		res += interval + base_low - addon_low;
+		res += (1 << il->hw_params.beacon_time_tsf_bits);
+	} else
+		res += (1 << il->hw_params.beacon_time_tsf_bits);
+
+	return cpu_to_le32(res);
+}
+EXPORT_SYMBOL(il_add_beacon_time);
+
+#ifdef CONFIG_PM
+
+int
+il_pci_suspend(struct device *device)
+{
+	struct pci_dev *pdev = to_pci_dev(device);
+	struct il_priv *il = pci_get_drvdata(pdev);
+
+	/*
+	 * This function is called when system goes into suspend state
+	 * mac80211 will call il_mac_stop() from the mac80211 suspend function
+	 * first but since il_mac_stop() has no knowledge of who the caller is,
+	 * it will not call apm_ops.stop() to stop the DMA operation.
+	 * Calling apm_ops.stop here to make sure we stop the DMA.
+	 */
+	il_apm_stop(il);
+
+	return 0;
+}
+EXPORT_SYMBOL(il_pci_suspend);
+
+int
+il_pci_resume(struct device *device)
+{
+	struct pci_dev *pdev = to_pci_dev(device);
+	struct il_priv *il = pci_get_drvdata(pdev);
+	bool hw_rfkill = false;
+
+	/*
+	 * We disable the RETRY_TIMEOUT register (0x41) to keep
+	 * PCI Tx retries from interfering with C3 CPU state.
+	 */
+	pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
+
+	il_enable_interrupts(il);
+
+	if (!(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
+		hw_rfkill = true;
+
+	if (hw_rfkill)
+		set_bit(S_RF_KILL_HW, &il->status);
+	else
+		clear_bit(S_RF_KILL_HW, &il->status);
+
+	wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rfkill);
+
+	return 0;
+}
+EXPORT_SYMBOL(il_pci_resume);
+
+const struct dev_pm_ops il_pm_ops = {
+	.suspend = il_pci_suspend,
+	.resume = il_pci_resume,
+	.freeze = il_pci_suspend,
+	.thaw = il_pci_resume,
+	.poweroff = il_pci_suspend,
+	.restore = il_pci_resume,
+};
+EXPORT_SYMBOL(il_pm_ops);
+
+#endif /* CONFIG_PM */
+
+static void
+il_update_qos(struct il_priv *il, struct il_rxon_context *ctx)
+{
+	if (test_bit(S_EXIT_PENDING, &il->status))
+		return;
+
+	if (!ctx->is_active)
+		return;
+
+	ctx->qos_data.def_qos_parm.qos_flags = 0;
+
+	if (ctx->qos_data.qos_active)
+		ctx->qos_data.def_qos_parm.qos_flags |=
+		    QOS_PARAM_FLG_UPDATE_EDCA_MSK;
+
+	if (ctx->ht.enabled)
+		ctx->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK;
+
+	D_QOS("send QoS cmd with Qos active=%d FLAGS=0x%X\n",
+	      ctx->qos_data.qos_active, ctx->qos_data.def_qos_parm.qos_flags);
+
+	il_send_cmd_pdu_async(il, ctx->qos_cmd, sizeof(struct il_qosparam_cmd),
+			      &ctx->qos_data.def_qos_parm, NULL);
+}
+
+/**
+ * il_mac_config - mac80211 config callback
+ */
+int
+il_mac_config(struct ieee80211_hw *hw, u32 changed)
+{
+	struct il_priv *il = hw->priv;
+	const struct il_channel_info *ch_info;
+	struct ieee80211_conf *conf = &hw->conf;
+	struct ieee80211_channel *channel = conf->channel;
+	struct il_ht_config *ht_conf = &il->current_ht_config;
+	struct il_rxon_context *ctx = &il->ctx;
+	unsigned long flags = 0;
+	int ret = 0;
+	u16 ch;
+	int scan_active = 0;
+	bool ht_changed = false;
+
+	if (WARN_ON(!il->cfg->ops->legacy))
+		return -EOPNOTSUPP;
+
+	mutex_lock(&il->mutex);
+
+	D_MAC80211("enter to channel %d changed 0x%X\n", channel->hw_value,
+		   changed);
+
+	if (unlikely(test_bit(S_SCANNING, &il->status))) {
+		scan_active = 1;
+		D_MAC80211("scan active\n");
+	}
+
+	if (changed &
+	    (IEEE80211_CONF_CHANGE_SMPS | IEEE80211_CONF_CHANGE_CHANNEL)) {
+		/* mac80211 uses static for non-HT which is what we want */
+		il->current_ht_config.smps = conf->smps_mode;
+
+		/*
+		 * Recalculate chain counts.
+		 *
+		 * If monitor mode is enabled then mac80211 will
+		 * set up the SM PS mode to OFF if an HT channel is
+		 * configured.
+		 */
+		if (il->cfg->ops->hcmd->set_rxon_chain)
+			il->cfg->ops->hcmd->set_rxon_chain(il, &il->ctx);
+	}
+
+	/* during scanning mac80211 will delay channel setting until
+	 * scan finish with changed = 0
+	 */
+	if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) {
+
+		if (scan_active)
+			goto set_ch_out;
+
+		ch = channel->hw_value;
+		ch_info = il_get_channel_info(il, channel->band, ch);
+		if (!il_is_channel_valid(ch_info)) {
+			D_MAC80211("leave - invalid channel\n");
+			ret = -EINVAL;
+			goto set_ch_out;
+		}
+
+		if (il->iw_mode == NL80211_IFTYPE_ADHOC &&
+		    !il_is_channel_ibss(ch_info)) {
+			D_MAC80211("leave - not IBSS channel\n");
+			ret = -EINVAL;
+			goto set_ch_out;
+		}
+
+		spin_lock_irqsave(&il->lock, flags);
+
+		/* Configure HT40 channels */
+		if (ctx->ht.enabled != conf_is_ht(conf)) {
+			ctx->ht.enabled = conf_is_ht(conf);
+			ht_changed = true;
+		}
+		if (ctx->ht.enabled) {
+			if (conf_is_ht40_minus(conf)) {
+				ctx->ht.extension_chan_offset =
+				    IEEE80211_HT_PARAM_CHA_SEC_BELOW;
+				ctx->ht.is_40mhz = true;
+			} else if (conf_is_ht40_plus(conf)) {
+				ctx->ht.extension_chan_offset =
+				    IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
+				ctx->ht.is_40mhz = true;
+			} else {
+				ctx->ht.extension_chan_offset =
+				    IEEE80211_HT_PARAM_CHA_SEC_NONE;
+				ctx->ht.is_40mhz = false;
+			}
+		} else
+			ctx->ht.is_40mhz = false;
+
+		/*
+		 * Default to no protection. Protection mode will
+		 * later be set from BSS config in il_ht_conf
+		 */
+		ctx->ht.protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE;
+
+		/* if we are switching from ht to 2.4 clear flags
+		 * from any ht related info since 2.4 does not
+		 * support ht */
+		if ((le16_to_cpu(ctx->staging.channel) != ch))
+			ctx->staging.flags = 0;
+
+		il_set_rxon_channel(il, channel, ctx);
+		il_set_rxon_ht(il, ht_conf);
+
+		il_set_flags_for_band(il, ctx, channel->band, ctx->vif);
+
+		spin_unlock_irqrestore(&il->lock, flags);
+
+		if (il->cfg->ops->legacy->update_bcast_stations)
+			ret = il->cfg->ops->legacy->update_bcast_stations(il);
+
+set_ch_out:
+		/* The list of supported rates and rate mask can be different
+		 * for each band; since the band may have changed, reset
+		 * the rate mask to what mac80211 lists */
+		il_set_rate(il);
+	}
+
+	if (changed & (IEEE80211_CONF_CHANGE_PS | IEEE80211_CONF_CHANGE_IDLE)) {
+		ret = il_power_update_mode(il, false);
+		if (ret)
+			D_MAC80211("Error setting sleep level\n");
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_POWER) {
+		D_MAC80211("TX Power old=%d new=%d\n", il->tx_power_user_lmt,
+			   conf->power_level);
+
+		il_set_tx_power(il, conf->power_level, false);
+	}
+
+	if (!il_is_ready(il)) {
+		D_MAC80211("leave - not ready\n");
+		goto out;
+	}
+
+	if (scan_active)
+		goto out;
+
+	if (memcmp(&ctx->active, &ctx->staging, sizeof(ctx->staging)))
+		il_commit_rxon(il, ctx);
+	else
+		D_INFO("Not re-sending same RXON configuration.\n");
+	if (ht_changed)
+		il_update_qos(il, ctx);
+
+out:
+	D_MAC80211("leave\n");
+	mutex_unlock(&il->mutex);
+	return ret;
+}
+EXPORT_SYMBOL(il_mac_config);
+
+void
+il_mac_reset_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+	struct il_priv *il = hw->priv;
+	unsigned long flags;
+	struct il_rxon_context *ctx = &il->ctx;
+
+	if (WARN_ON(!il->cfg->ops->legacy))
+		return;
+
+	mutex_lock(&il->mutex);
+	D_MAC80211("enter\n");
+
+	spin_lock_irqsave(&il->lock, flags);
+	memset(&il->current_ht_config, 0, sizeof(struct il_ht_config));
+	spin_unlock_irqrestore(&il->lock, flags);
+
+	spin_lock_irqsave(&il->lock, flags);
+
+	/* new association get rid of ibss beacon skb */
+	if (il->beacon_skb)
+		dev_kfree_skb(il->beacon_skb);
+
+	il->beacon_skb = NULL;
+
+	il->timestamp = 0;
+
+	spin_unlock_irqrestore(&il->lock, flags);
+
+	il_scan_cancel_timeout(il, 100);
+	if (!il_is_ready_rf(il)) {
+		D_MAC80211("leave - not ready\n");
+		mutex_unlock(&il->mutex);
+		return;
+	}
+
+	/* we are restarting association process
+	 * clear RXON_FILTER_ASSOC_MSK bit
+	 */
+	ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	il_commit_rxon(il, ctx);
+
+	il_set_rate(il);
+
+	mutex_unlock(&il->mutex);
+
+	D_MAC80211("leave\n");
+}
+EXPORT_SYMBOL(il_mac_reset_tsf);
+
+static void
+il_ht_conf(struct il_priv *il, struct ieee80211_vif *vif)
+{
+	struct il_ht_config *ht_conf = &il->current_ht_config;
+	struct ieee80211_sta *sta;
+	struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
+	struct il_rxon_context *ctx = il_rxon_ctx_from_vif(vif);
+
+	D_ASSOC("enter:\n");
+
+	if (!ctx->ht.enabled)
+		return;
+
+	ctx->ht.protection =
+	    bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_PROTECTION;
+	ctx->ht.non_gf_sta_present =
+	    !!(bss_conf->
+	       ht_operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
+
+	ht_conf->single_chain_sufficient = false;
+
+	switch (vif->type) {
+	case NL80211_IFTYPE_STATION:
+		rcu_read_lock();
+		sta = ieee80211_find_sta(vif, bss_conf->bssid);
+		if (sta) {
+			struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
+			int maxstreams;
+
+			maxstreams =
+			    (ht_cap->mcs.
+			     tx_params & IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK)
+			    >> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
+			maxstreams += 1;
+
+			if (ht_cap->mcs.rx_mask[1] == 0 &&
+			    ht_cap->mcs.rx_mask[2] == 0)
+				ht_conf->single_chain_sufficient = true;
+			if (maxstreams <= 1)
+				ht_conf->single_chain_sufficient = true;
+		} else {
+			/*
+			 * If at all, this can only happen through a race
+			 * when the AP disconnects us while we're still
+			 * setting up the connection, in that case mac80211
+			 * will soon tell us about that.
+			 */
+			ht_conf->single_chain_sufficient = true;
+		}
+		rcu_read_unlock();
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		ht_conf->single_chain_sufficient = true;
+		break;
+	default:
+		break;
+	}
+
+	D_ASSOC("leave\n");
+}
+
+static inline void
+il_set_no_assoc(struct il_priv *il, struct ieee80211_vif *vif)
+{
+	struct il_rxon_context *ctx = il_rxon_ctx_from_vif(vif);
+
+	/*
+	 * inform the ucode that there is no longer an
+	 * association and that no more packets should be
+	 * sent
+	 */
+	ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	ctx->staging.assoc_id = 0;
+	il_commit_rxon(il, ctx);
+}
+
+static void
+il_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+	struct il_priv *il = hw->priv;
+	unsigned long flags;
+	__le64 timestamp;
+	struct sk_buff *skb = ieee80211_beacon_get(hw, vif);
+
+	if (!skb)
+		return;
+
+	D_MAC80211("enter\n");
+
+	lockdep_assert_held(&il->mutex);
+
+	if (!il->beacon_ctx) {
+		IL_ERR("update beacon but no beacon context!\n");
+		dev_kfree_skb(skb);
+		return;
+	}
+
+	spin_lock_irqsave(&il->lock, flags);
+
+	if (il->beacon_skb)
+		dev_kfree_skb(il->beacon_skb);
+
+	il->beacon_skb = skb;
+
+	timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
+	il->timestamp = le64_to_cpu(timestamp);
+
+	D_MAC80211("leave\n");
+	spin_unlock_irqrestore(&il->lock, flags);
+
+	if (!il_is_ready_rf(il)) {
+		D_MAC80211("leave - RF not ready\n");
+		return;
+	}
+
+	il->cfg->ops->legacy->post_associate(il);
+}
+
+void
+il_mac_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			struct ieee80211_bss_conf *bss_conf, u32 changes)
+{
+	struct il_priv *il = hw->priv;
+	struct il_rxon_context *ctx = il_rxon_ctx_from_vif(vif);
+	int ret;
+
+	if (WARN_ON(!il->cfg->ops->legacy))
+		return;
+
+	D_MAC80211("changes = 0x%X\n", changes);
+
+	mutex_lock(&il->mutex);
+
+	if (!il_is_alive(il)) {
+		mutex_unlock(&il->mutex);
+		return;
+	}
+
+	if (changes & BSS_CHANGED_QOS) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&il->lock, flags);
+		ctx->qos_data.qos_active = bss_conf->qos;
+		il_update_qos(il, ctx);
+		spin_unlock_irqrestore(&il->lock, flags);
+	}
+
+	if (changes & BSS_CHANGED_BEACON_ENABLED) {
+		/*
+		 * the add_interface code must make sure we only ever
+		 * have a single interface that could be beaconing at
+		 * any time.
+		 */
+		if (vif->bss_conf.enable_beacon)
+			il->beacon_ctx = ctx;
+		else
+			il->beacon_ctx = NULL;
+	}
+
+	if (changes & BSS_CHANGED_BSSID) {
+		D_MAC80211("BSSID %pM\n", bss_conf->bssid);
+
+		/*
+		 * If there is currently a HW scan going on in the
+		 * background then we need to cancel it else the RXON
+		 * below/in post_associate will fail.
+		 */
+		if (il_scan_cancel_timeout(il, 100)) {
+			IL_WARN("Aborted scan still in progress after 100ms\n");
+			D_MAC80211("leaving - scan abort failed.\n");
+			mutex_unlock(&il->mutex);
+			return;
+		}
+
+		/* mac80211 only sets assoc when in STATION mode */
+		if (vif->type == NL80211_IFTYPE_ADHOC || bss_conf->assoc) {
+			memcpy(ctx->staging.bssid_addr, bss_conf->bssid,
+			       ETH_ALEN);
+
+			/* currently needed in a few places */
+			memcpy(il->bssid, bss_conf->bssid, ETH_ALEN);
+		} else {
+			ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+		}
+
+	}
+
+	/*
+	 * This needs to be after setting the BSSID in case
+	 * mac80211 decides to do both changes at once because
+	 * it will invoke post_associate.
+	 */
+	if (vif->type == NL80211_IFTYPE_ADHOC && (changes & BSS_CHANGED_BEACON))
+		il_beacon_update(hw, vif);
+
+	if (changes & BSS_CHANGED_ERP_PREAMBLE) {
+		D_MAC80211("ERP_PREAMBLE %d\n", bss_conf->use_short_preamble);
+		if (bss_conf->use_short_preamble)
+			ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
+		else
+			ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+	}
+
+	if (changes & BSS_CHANGED_ERP_CTS_PROT) {
+		D_MAC80211("ERP_CTS %d\n", bss_conf->use_cts_prot);
+		if (bss_conf->use_cts_prot && il->band != IEEE80211_BAND_5GHZ)
+			ctx->staging.flags |= RXON_FLG_TGG_PROTECT_MSK;
+		else
+			ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
+		if (bss_conf->use_cts_prot)
+			ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
+		else
+			ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN;
+	}
+
+	if (changes & BSS_CHANGED_BASIC_RATES) {
+		/* XXX use this information
+		 *
+		 * To do that, remove code from il_set_rate() and put something
+		 * like this here:
+		 *
+		 if (A-band)
+		 ctx->staging.ofdm_basic_rates =
+		 bss_conf->basic_rates;
+		 else
+		 ctx->staging.ofdm_basic_rates =
+		 bss_conf->basic_rates >> 4;
+		 ctx->staging.cck_basic_rates =
+		 bss_conf->basic_rates & 0xF;
+		 */
+	}
+
+	if (changes & BSS_CHANGED_HT) {
+		il_ht_conf(il, vif);
+
+		if (il->cfg->ops->hcmd->set_rxon_chain)
+			il->cfg->ops->hcmd->set_rxon_chain(il, ctx);
+	}
+
+	if (changes & BSS_CHANGED_ASSOC) {
+		D_MAC80211("ASSOC %d\n", bss_conf->assoc);
+		if (bss_conf->assoc) {
+			il->timestamp = bss_conf->timestamp;
+
+			if (!il_is_rfkill(il))
+				il->cfg->ops->legacy->post_associate(il);
+		} else
+			il_set_no_assoc(il, vif);
+	}
+
+	if (changes && il_is_associated_ctx(ctx) && bss_conf->aid) {
+		D_MAC80211("Changes (%#x) while associated\n", changes);
+		ret = il_send_rxon_assoc(il, ctx);
+		if (!ret) {
+			/* Sync active_rxon with latest change. */
+			memcpy((void *)&ctx->active, &ctx->staging,
+			       sizeof(struct il_rxon_cmd));
+		}
+	}
+
+	if (changes & BSS_CHANGED_BEACON_ENABLED) {
+		if (vif->bss_conf.enable_beacon) {
+			memcpy(ctx->staging.bssid_addr, bss_conf->bssid,
+			       ETH_ALEN);
+			memcpy(il->bssid, bss_conf->bssid, ETH_ALEN);
+			il->cfg->ops->legacy->config_ap(il);
+		} else
+			il_set_no_assoc(il, vif);
+	}
+
+	if (changes & BSS_CHANGED_IBSS) {
+		ret =
+		    il->cfg->ops->legacy->manage_ibss_station(il, vif,
+							      bss_conf->
+							      ibss_joined);
+		if (ret)
+			IL_ERR("failed to %s IBSS station %pM\n",
+			       bss_conf->ibss_joined ? "add" : "remove",
+			       bss_conf->bssid);
+	}
+
+	mutex_unlock(&il->mutex);
+
+	D_MAC80211("leave\n");
+}
+EXPORT_SYMBOL(il_mac_bss_info_changed);
+
+irqreturn_t
+il_isr(int irq, void *data)
+{
+	struct il_priv *il = data;
+	u32 inta, inta_mask;
+	u32 inta_fh;
+	unsigned long flags;
+	if (!il)
+		return IRQ_NONE;
+
+	spin_lock_irqsave(&il->lock, flags);
+
+	/* Disable (but don't clear!) interrupts here to avoid
+	 *    back-to-back ISRs and sporadic interrupts from our NIC.
+	 * If we have something to service, the tasklet will re-enable ints.
+	 * If we *don't* have something, we'll re-enable before leaving here. */
+	inta_mask = _il_rd(il, CSR_INT_MASK);	/* just for debug */
+	_il_wr(il, CSR_INT_MASK, 0x00000000);
+
+	/* Discover which interrupts are active/pending */
+	inta = _il_rd(il, CSR_INT);
+	inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
+
+	/* Ignore interrupt if there's nothing in NIC to service.
+	 * This may be due to IRQ shared with another device,
+	 * or due to sporadic interrupts thrown from our NIC. */
+	if (!inta && !inta_fh) {
+		D_ISR("Ignore interrupt, inta == 0, inta_fh == 0\n");
+		goto none;
+	}
+
+	if (inta == 0xFFFFFFFF || (inta & 0xFFFFFFF0) == 0xa5a5a5a0) {
+		/* Hardware disappeared. It might have already raised
+		 * an interrupt */
+		IL_WARN("HARDWARE GONE?? INTA == 0x%08x\n", inta);
+		goto unplugged;
+	}
+
+	D_ISR("ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta, inta_mask,
+	      inta_fh);
+
+	inta &= ~CSR_INT_BIT_SCD;
+
+	/* il_irq_tasklet() will service interrupts and re-enable them */
+	if (likely(inta || inta_fh))
+		tasklet_schedule(&il->irq_tasklet);
+
+unplugged:
+	spin_unlock_irqrestore(&il->lock, flags);
+	return IRQ_HANDLED;
+
+none:
+	/* re-enable interrupts here since we don't have anything to service. */
+	/* only Re-enable if disabled by irq */
+	if (test_bit(S_INT_ENABLED, &il->status))
+		il_enable_interrupts(il);
+	spin_unlock_irqrestore(&il->lock, flags);
+	return IRQ_NONE;
+}
+EXPORT_SYMBOL(il_isr);
+
+/*
+ *  il_tx_cmd_protection: Set rts/cts. 3945 and 4965 only share this
+ *  function.
+ */
+void
+il_tx_cmd_protection(struct il_priv *il, struct ieee80211_tx_info *info,
+		     __le16 fc, __le32 *tx_flags)
+{
+	if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
+		*tx_flags |= TX_CMD_FLG_RTS_MSK;
+		*tx_flags &= ~TX_CMD_FLG_CTS_MSK;
+		*tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
+
+		if (!ieee80211_is_mgmt(fc))
+			return;
+
+		switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
+		case cpu_to_le16(IEEE80211_STYPE_AUTH):
+		case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
+		case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ):
+		case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ):
+			*tx_flags &= ~TX_CMD_FLG_RTS_MSK;
+			*tx_flags |= TX_CMD_FLG_CTS_MSK;
+			break;
+		}
+	} else if (info->control.rates[0].
+		   flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+		*tx_flags &= ~TX_CMD_FLG_RTS_MSK;
+		*tx_flags |= TX_CMD_FLG_CTS_MSK;
+		*tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
+	}
+}
+EXPORT_SYMBOL(il_tx_cmd_protection);