diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-03-16 16:29:25 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-03-16 16:29:25 -0700 |
commit | 7a6362800cb7d1d618a697a650c7aaed3eb39320 (patch) | |
tree | 087f9bc6c13ef1fad4b392c5cf9325cd28fa8523 /drivers/net/wireless/iwlegacy/iwl-4965-lib.c | |
parent | 6445ced8670f37cfc2c5e24a9de9b413dbfc788d (diff) | |
parent | ceda86a108671294052cbf51660097b6534672f5 (diff) |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1480 commits)
bonding: enable netpoll without checking link status
xfrm: Refcount destination entry on xfrm_lookup
net: introduce rx_handler results and logic around that
bonding: get rid of IFF_SLAVE_INACTIVE netdev->priv_flag
bonding: wrap slave state work
net: get rid of multiple bond-related netdevice->priv_flags
bonding: register slave pointer for rx_handler
be2net: Bump up the version number
be2net: Copyright notice change. Update to Emulex instead of ServerEngines
e1000e: fix kconfig for crc32 dependency
netfilter ebtables: fix xt_AUDIT to work with ebtables
xen network backend driver
bonding: Improve syslog message at device creation time
bonding: Call netif_carrier_off after register_netdevice
bonding: Incorrect TX queue offset
net_sched: fix ip_tos2prio
xfrm: fix __xfrm_route_forward()
be2net: Fix UDP packet detected status in RX compl
Phonet: fix aligned-mode pipe socket buffer header reserve
netxen: support for GbE port settings
...
Fix up conflicts in drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
with the staging updates.
Diffstat (limited to 'drivers/net/wireless/iwlegacy/iwl-4965-lib.c')
-rw-r--r-- | drivers/net/wireless/iwlegacy/iwl-4965-lib.c | 1260 |
1 files changed, 1260 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-lib.c b/drivers/net/wireless/iwlegacy/iwl-4965-lib.c new file mode 100644 index 00000000000..5a8a3cce27b --- /dev/null +++ b/drivers/net/wireless/iwlegacy/iwl-4965-lib.c @@ -0,0 +1,1260 @@ +/****************************************************************************** + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ +#include <linux/etherdevice.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/sched.h> + +#include "iwl-dev.h" +#include "iwl-core.h" +#include "iwl-io.h" +#include "iwl-helpers.h" +#include "iwl-4965-hw.h" +#include "iwl-4965.h" +#include "iwl-sta.h" + +void iwl4965_check_abort_status(struct iwl_priv *priv, + u8 frame_count, u32 status) +{ + if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) { + IWL_ERR(priv, "Tx flush command to flush out all frames\n"); + if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) + queue_work(priv->workqueue, &priv->tx_flush); + } +} + +/* + * EEPROM + */ +struct iwl_mod_params iwl4965_mod_params = { + .amsdu_size_8K = 1, + .restart_fw = 1, + /* the rest are 0 by default */ +}; + +void iwl4965_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) +{ + unsigned long flags; + int i; + spin_lock_irqsave(&rxq->lock, flags); + INIT_LIST_HEAD(&rxq->rx_free); + INIT_LIST_HEAD(&rxq->rx_used); + /* Fill the rx_used queue with _all_ of the Rx buffers */ + for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { + /* In the reset function, these buffers may have been allocated + * to an SKB, so we need to unmap and free potential storage */ + if (rxq->pool[i].page != NULL) { + pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, + PAGE_SIZE << priv->hw_params.rx_page_order, + PCI_DMA_FROMDEVICE); + __iwl_legacy_free_pages(priv, rxq->pool[i].page); + rxq->pool[i].page = NULL; + } + list_add_tail(&rxq->pool[i].list, &rxq->rx_used); + } + + for (i = 0; i < RX_QUEUE_SIZE; i++) + rxq->queue[i] = NULL; + + /* Set us so that we have processed and used all buffers, but have + * not restocked the Rx queue with fresh buffers */ + rxq->read = rxq->write = 0; + rxq->write_actual = 0; + rxq->free_count = 0; + spin_unlock_irqrestore(&rxq->lock, flags); +} + +int iwl4965_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq) +{ + u32 rb_size; + const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */ + u32 rb_timeout = 0; + + if (priv->cfg->mod_params->amsdu_size_8K) + rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K; + else + rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K; + + /* Stop Rx DMA */ + iwl_legacy_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); + + /* Reset driver's Rx queue write index */ + iwl_legacy_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0); + + /* Tell device where to find RBD circular buffer in DRAM */ + iwl_legacy_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG, + (u32)(rxq->bd_dma >> 8)); + + /* Tell device where in DRAM to update its Rx status */ + iwl_legacy_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG, + rxq->rb_stts_dma >> 4); + + /* Enable Rx DMA + * Direct rx interrupts to hosts + * Rx buffer size 4 or 8k + * RB timeout 0x10 + * 256 RBDs + */ + iwl_legacy_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, + FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL | + FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL | + FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK | + rb_size| + (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)| + (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS)); + + /* Set interrupt coalescing timer to default (2048 usecs) */ + iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_TIMEOUT_DEF); + + return 0; +} + +static void iwl4965_set_pwr_vmain(struct iwl_priv *priv) +{ +/* + * (for documentation purposes) + * to set power to V_AUX, do: + + if (pci_pme_capable(priv->pci_dev, PCI_D3cold)) + iwl_legacy_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_PWR_SRC_VAUX, + ~APMG_PS_CTRL_MSK_PWR_SRC); + */ + + iwl_legacy_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, + ~APMG_PS_CTRL_MSK_PWR_SRC); +} + +int iwl4965_hw_nic_init(struct iwl_priv *priv) +{ + unsigned long flags; + struct iwl_rx_queue *rxq = &priv->rxq; + int ret; + + /* nic_init */ + spin_lock_irqsave(&priv->lock, flags); + priv->cfg->ops->lib->apm_ops.init(priv); + + /* Set interrupt coalescing calibration timer to default (512 usecs) */ + iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_CALIB_TIMEOUT_DEF); + + spin_unlock_irqrestore(&priv->lock, flags); + + iwl4965_set_pwr_vmain(priv); + + priv->cfg->ops->lib->apm_ops.config(priv); + + /* Allocate the RX queue, or reset if it is already allocated */ + if (!rxq->bd) { + ret = iwl_legacy_rx_queue_alloc(priv); + if (ret) { + IWL_ERR(priv, "Unable to initialize Rx queue\n"); + return -ENOMEM; + } + } else + iwl4965_rx_queue_reset(priv, rxq); + + iwl4965_rx_replenish(priv); + + iwl4965_rx_init(priv, rxq); + + spin_lock_irqsave(&priv->lock, flags); + + rxq->need_update = 1; + iwl_legacy_rx_queue_update_write_ptr(priv, rxq); + + spin_unlock_irqrestore(&priv->lock, flags); + + /* Allocate or reset and init all Tx and Command queues */ + if (!priv->txq) { + ret = iwl4965_txq_ctx_alloc(priv); + if (ret) + return ret; + } else + iwl4965_txq_ctx_reset(priv); + + set_bit(STATUS_INIT, &priv->status); + + return 0; +} + +/** + * iwl4965_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr + */ +static inline __le32 iwl4965_dma_addr2rbd_ptr(struct iwl_priv *priv, + dma_addr_t dma_addr) +{ + return cpu_to_le32((u32)(dma_addr >> 8)); +} + +/** + * iwl4965_rx_queue_restock - refill RX queue from pre-allocated pool + * + * If there are slots in the RX queue that need to be restocked, + * and we have free pre-allocated buffers, fill the ranks as much + * as we can, pulling from rx_free. + * + * This moves the 'write' index forward to catch up with 'processed', and + * also updates the memory address in the firmware to reference the new + * target buffer. + */ +void iwl4965_rx_queue_restock(struct iwl_priv *priv) +{ + struct iwl_rx_queue *rxq = &priv->rxq; + struct list_head *element; + struct iwl_rx_mem_buffer *rxb; + unsigned long flags; + + spin_lock_irqsave(&rxq->lock, flags); + while ((iwl_legacy_rx_queue_space(rxq) > 0) && (rxq->free_count)) { + /* The overwritten rxb must be a used one */ + rxb = rxq->queue[rxq->write]; + BUG_ON(rxb && rxb->page); + + /* Get next free Rx buffer, remove from free list */ + element = rxq->rx_free.next; + rxb = list_entry(element, struct iwl_rx_mem_buffer, list); + list_del(element); + + /* Point to Rx buffer via next RBD in circular buffer */ + rxq->bd[rxq->write] = iwl4965_dma_addr2rbd_ptr(priv, + rxb->page_dma); + rxq->queue[rxq->write] = rxb; + rxq->write = (rxq->write + 1) & RX_QUEUE_MASK; + rxq->free_count--; + } + spin_unlock_irqrestore(&rxq->lock, flags); + /* If the pre-allocated buffer pool is dropping low, schedule to + * refill it */ + if (rxq->free_count <= RX_LOW_WATERMARK) + queue_work(priv->workqueue, &priv->rx_replenish); + + + /* If we've added more space for the firmware to place data, tell it. + * Increment device's write pointer in multiples of 8. */ + if (rxq->write_actual != (rxq->write & ~0x7)) { + spin_lock_irqsave(&rxq->lock, flags); + rxq->need_update = 1; + spin_unlock_irqrestore(&rxq->lock, flags); + iwl_legacy_rx_queue_update_write_ptr(priv, rxq); + } +} + +/** + * iwl4965_rx_replenish - Move all used packet from rx_used to rx_free + * + * When moving to rx_free an SKB is allocated for the slot. + * + * Also restock the Rx queue via iwl_rx_queue_restock. + * This is called as a scheduled work item (except for during initialization) + */ +static void iwl4965_rx_allocate(struct iwl_priv *priv, gfp_t priority) +{ + struct iwl_rx_queue *rxq = &priv->rxq; + struct list_head *element; + struct iwl_rx_mem_buffer *rxb; + struct page *page; + unsigned long flags; + gfp_t gfp_mask = priority; + + while (1) { + spin_lock_irqsave(&rxq->lock, flags); + if (list_empty(&rxq->rx_used)) { + spin_unlock_irqrestore(&rxq->lock, flags); + return; + } + spin_unlock_irqrestore(&rxq->lock, flags); + + if (rxq->free_count > RX_LOW_WATERMARK) + gfp_mask |= __GFP_NOWARN; + + if (priv->hw_params.rx_page_order > 0) + gfp_mask |= __GFP_COMP; + + /* Alloc a new receive buffer */ + page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order); + if (!page) { + if (net_ratelimit()) + IWL_DEBUG_INFO(priv, "alloc_pages failed, " + "order: %d\n", + priv->hw_params.rx_page_order); + + if ((rxq->free_count <= RX_LOW_WATERMARK) && + net_ratelimit()) + IWL_CRIT(priv, + "Failed to alloc_pages with %s. " + "Only %u free buffers remaining.\n", + priority == GFP_ATOMIC ? + "GFP_ATOMIC" : "GFP_KERNEL", + rxq->free_count); + /* We don't reschedule replenish work here -- we will + * call the restock method and if it still needs + * more buffers it will schedule replenish */ + return; + } + + spin_lock_irqsave(&rxq->lock, flags); + + if (list_empty(&rxq->rx_used)) { + spin_unlock_irqrestore(&rxq->lock, flags); + __free_pages(page, priv->hw_params.rx_page_order); + return; + } + element = rxq->rx_used.next; + rxb = list_entry(element, struct iwl_rx_mem_buffer, list); + list_del(element); + + spin_unlock_irqrestore(&rxq->lock, flags); + + BUG_ON(rxb->page); + rxb->page = page; + /* Get physical address of the RB */ + rxb->page_dma = pci_map_page(priv->pci_dev, page, 0, + PAGE_SIZE << priv->hw_params.rx_page_order, + PCI_DMA_FROMDEVICE); + /* dma address must be no more than 36 bits */ + BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36)); + /* and also 256 byte aligned! */ + BUG_ON(rxb->page_dma & DMA_BIT_MASK(8)); + + spin_lock_irqsave(&rxq->lock, flags); + + list_add_tail(&rxb->list, &rxq->rx_free); + rxq->free_count++; + priv->alloc_rxb_page++; + + spin_unlock_irqrestore(&rxq->lock, flags); + } +} + +void iwl4965_rx_replenish(struct iwl_priv *priv) +{ + unsigned long flags; + + iwl4965_rx_allocate(priv, GFP_KERNEL); + + spin_lock_irqsave(&priv->lock, flags); + iwl4965_rx_queue_restock(priv); + spin_unlock_irqrestore(&priv->lock, flags); +} + +void iwl4965_rx_replenish_now(struct iwl_priv *priv) +{ + iwl4965_rx_allocate(priv, GFP_ATOMIC); + + iwl4965_rx_queue_restock(priv); +} + +/* Assumes that the skb field of the buffers in 'pool' is kept accurate. + * If an SKB has been detached, the POOL needs to have its SKB set to NULL + * This free routine walks the list of POOL entries and if SKB is set to + * non NULL it is unmapped and freed + */ +void iwl4965_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq) +{ + int i; + for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { + if (rxq->pool[i].page != NULL) { + pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma, + PAGE_SIZE << priv->hw_params.rx_page_order, + PCI_DMA_FROMDEVICE); + __iwl_legacy_free_pages(priv, rxq->pool[i].page); + rxq->pool[i].page = NULL; + } + } + + dma_free_coherent(&priv->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd, + rxq->bd_dma); + dma_free_coherent(&priv->pci_dev->dev, sizeof(struct iwl_rb_status), + rxq->rb_stts, rxq->rb_stts_dma); + rxq->bd = NULL; + rxq->rb_stts = NULL; +} + +int iwl4965_rxq_stop(struct iwl_priv *priv) +{ + + /* stop Rx DMA */ + iwl_legacy_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); + iwl_poll_direct_bit(priv, FH_MEM_RSSR_RX_STATUS_REG, + FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000); + + return 0; +} + +int iwl4965_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band) +{ + int idx = 0; + int band_offset = 0; + + /* HT rate format: mac80211 wants an MCS number, which is just LSB */ + if (rate_n_flags & RATE_MCS_HT_MSK) { + idx = (rate_n_flags & 0xff); + return idx; + /* Legacy rate format, search for match in table */ + } else { + if (band == IEEE80211_BAND_5GHZ) + band_offset = IWL_FIRST_OFDM_RATE; + for (idx = band_offset; idx < IWL_RATE_COUNT_LEGACY; idx++) + if (iwlegacy_rates[idx].plcp == (rate_n_flags & 0xFF)) + return idx - band_offset; + } + + return -1; +} + +static int iwl4965_calc_rssi(struct iwl_priv *priv, + struct iwl_rx_phy_res *rx_resp) +{ + /* data from PHY/DSP regarding signal strength, etc., + * contents are always there, not configurable by host. */ + struct iwl4965_rx_non_cfg_phy *ncphy = + (struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf; + u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL49_AGC_DB_MASK) + >> IWL49_AGC_DB_POS; + + u32 valid_antennae = + (le16_to_cpu(rx_resp->phy_flags) & IWL49_RX_PHY_FLAGS_ANTENNAE_MASK) + >> IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET; + u8 max_rssi = 0; + u32 i; + + /* Find max rssi among 3 possible receivers. + * These values are measured by the digital signal processor (DSP). + * They should stay fairly constant even as the signal strength varies, + * if the radio's automatic gain control (AGC) is working right. + * AGC value (see below) will provide the "interesting" info. */ + for (i = 0; i < 3; i++) + if (valid_antennae & (1 << i)) + max_rssi = max(ncphy->rssi_info[i << 1], max_rssi); + + IWL_DEBUG_STATS(priv, "Rssi In A %d B %d C %d Max %d AGC dB %d\n", + ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4], + max_rssi, agc); + + /* dBm = max_rssi dB - agc dB - constant. + * Higher AGC (higher radio gain) means lower signal. */ + return max_rssi - agc - IWL4965_RSSI_OFFSET; +} + + +static u32 iwl4965_translate_rx_status(struct iwl_priv *priv, u32 decrypt_in) +{ + u32 decrypt_out = 0; + + if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) == + RX_RES_STATUS_STATION_FOUND) + decrypt_out |= (RX_RES_STATUS_STATION_FOUND | + RX_RES_STATUS_NO_STATION_INFO_MISMATCH); + + decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK); + + /* packet was not encrypted */ + if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == + RX_RES_STATUS_SEC_TYPE_NONE) + return decrypt_out; + + /* packet was encrypted with unknown alg */ + if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) == + RX_RES_STATUS_SEC_TYPE_ERR) + return decrypt_out; + + /* decryption was not done in HW */ + if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) != + RX_MPDU_RES_STATUS_DEC_DONE_MSK) + return decrypt_out; + + switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) { + + case RX_RES_STATUS_SEC_TYPE_CCMP: + /* alg is CCM: check MIC only */ + if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK)) + /* Bad MIC */ + decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; + else + decrypt_out |= RX_RES_STATUS_DECRYPT_OK; + + break; + + case RX_RES_STATUS_SEC_TYPE_TKIP: + if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) { + /* Bad TTAK */ + decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK; + break; + } + /* fall through if TTAK OK */ + default: + if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK)) + decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC; + else + decrypt_out |= RX_RES_STATUS_DECRYPT_OK; + break; + } + + IWL_DEBUG_RX(priv, "decrypt_in:0x%x decrypt_out = 0x%x\n", + decrypt_in, decrypt_out); + + return decrypt_out; +} + +static void iwl4965_pass_packet_to_mac80211(struct iwl_priv *priv, + struct ieee80211_hdr *hdr, + u16 len, + u32 ampdu_status, + struct iwl_rx_mem_buffer *rxb, + struct ieee80211_rx_status *stats) +{ + struct sk_buff *skb; + __le16 fc = hdr->frame_control; + + /* We only process data packets if the interface is open */ + if (unlikely(!priv->is_open)) { + IWL_DEBUG_DROP_LIMIT(priv, + "Dropping packet while interface is not open.\n"); + return; + } + + /* In case of HW accelerated crypto and bad decryption, drop */ + if (!priv->cfg->mod_params->sw_crypto && + iwl_legacy_set_decrypted_flag(priv, hdr, ampdu_status, stats)) + return; + + skb = dev_alloc_skb(128); + if (!skb) { + IWL_ERR(priv, "dev_alloc_skb failed\n"); + return; + } + + skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), len); + + iwl_legacy_update_stats(priv, false, fc, len); + memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats)); + + ieee80211_rx(priv->hw, skb); + priv->alloc_rxb_page--; + rxb->page = NULL; +} + +/* Called for REPLY_RX (legacy ABG frames), or + * REPLY_RX_MPDU_CMD (HT high-throughput N frames). */ +void iwl4965_rx_reply_rx(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct ieee80211_hdr *header; + struct ieee80211_rx_status rx_status; + struct iwl_rx_packet *pkt = rxb_addr(rxb); + struct iwl_rx_phy_res *phy_res; + __le32 rx_pkt_status; + struct iwl_rx_mpdu_res_start *amsdu; + u32 len; + u32 ampdu_status; + u32 rate_n_flags; + + /** + * REPLY_RX and REPLY_RX_MPDU_CMD are handled differently. + * REPLY_RX: physical layer info is in this buffer + * REPLY_RX_MPDU_CMD: physical layer info was sent in separate + * command and cached in priv->last_phy_res + * + * Here we set up local variables depending on which command is + * received. + */ + if (pkt->hdr.cmd == REPLY_RX) { + phy_res = (struct iwl_rx_phy_res *)pkt->u.raw; + header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*phy_res) + + phy_res->cfg_phy_cnt); + + len = le16_to_cpu(phy_res->byte_count); + rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*phy_res) + + phy_res->cfg_phy_cnt + len); + ampdu_status = le32_to_cpu(rx_pkt_status); + } else { + if (!priv->_4965.last_phy_res_valid) { + IWL_ERR(priv, "MPDU frame without cached PHY data\n"); + return; + } + phy_res = &priv->_4965.last_phy_res; + amsdu = (struct iwl_rx_mpdu_res_start *)pkt->u.raw; + header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*amsdu)); + len = le16_to_cpu(amsdu->byte_count); + rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*amsdu) + len); + ampdu_status = iwl4965_translate_rx_status(priv, + le32_to_cpu(rx_pkt_status)); + } + + if ((unlikely(phy_res->cfg_phy_cnt > 20))) { + IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n", + phy_res->cfg_phy_cnt); + return; + } + + if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) || + !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) { + IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n", + le32_to_cpu(rx_pkt_status)); + return; + } + + /* This will be used in several places later */ + rate_n_flags = le32_to_cpu(phy_res->rate_n_flags); + + /* rx_status carries information about the packet to mac80211 */ + rx_status.mactime = le64_to_cpu(phy_res->timestamp); + rx_status.freq = + ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel), + rx_status.band); + rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? + IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; + rx_status.rate_idx = + iwl4965_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band); + rx_status.flag = 0; + + /* TSF isn't reliable. In order to allow smooth user experience, + * this W/A doesn't propagate it to the mac80211 */ + /*rx_status.flag |= RX_FLAG_MACTIME_MPDU;*/ + + priv->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp); + + /* Find max signal strength (dBm) among 3 antenna/receiver chains */ + rx_status.signal = iwl4965_calc_rssi(priv, phy_res); + + iwl_legacy_dbg_log_rx_data_frame(priv, len, header); + IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, TSF %llu\n", + rx_status.signal, (unsigned long long)rx_status.mactime); + + /* + * "antenna number" + * + * It seems that the antenna field in the phy flags value + * is actually a bit field. This is undefined by radiotap, + * it wants an actual antenna number but I always get "7" + * for most legacy frames I receive indicating that the + * same frame was received on all three RX chains. + * + * I think this field should be removed in favor of a + * new 802.11n radiotap field "RX chains" that is defined + * as a bitmask. + */ + rx_status.antenna = + (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) + >> RX_RES_PHY_FLAGS_ANTENNA_POS; + + /* set the preamble flag if appropriate */ + if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK) + rx_status.flag |= RX_FLAG_SHORTPRE; + + /* Set up the HT phy flags */ + if (rate_n_flags & RATE_MCS_HT_MSK) + rx_status.flag |= RX_FLAG_HT; + if (rate_n_flags & RATE_MCS_HT40_MSK) + rx_status.flag |= RX_FLAG_40MHZ; + if (rate_n_flags & RATE_MCS_SGI_MSK) + rx_status.flag |= RX_FLAG_SHORT_GI; + + iwl4965_pass_packet_to_mac80211(priv, header, len, ampdu_status, + rxb, &rx_status); +} + +/* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD). + * This will be used later in iwl_rx_reply_rx() for REPLY_RX_MPDU_CMD. */ +void iwl4965_rx_reply_rx_phy(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + priv->_4965.last_phy_res_valid = true; + memcpy(&priv->_4965.last_phy_res, pkt->u.raw, + sizeof(struct iwl_rx_phy_res)); +} + +static int iwl4965_get_single_channel_for_scan(struct iwl_priv *priv, + struct ieee80211_vif *vif, + enum ieee80211_band band, + struct iwl_scan_channel *scan_ch) +{ + const struct ieee80211_supported_band *sband; + u16 passive_dwell = 0; + u16 active_dwell = 0; + int added = 0; + u16 channel = 0; + + sband = iwl_get_hw_mode(priv, band); + if (!sband) { + IWL_ERR(priv, "invalid band\n"); + return added; + } + + active_dwell = iwl_legacy_get_active_dwell_time(priv, band, 0); + passive_dwell = iwl_legacy_get_passive_dwell_time(priv, band, vif); + + if (passive_dwell <= active_dwell) + passive_dwell = active_dwell + 1; + + channel = iwl_legacy_get_single_channel_number(priv, band); + if (channel) { + scan_ch->channel = cpu_to_le16(channel); + scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; + scan_ch->active_dwell = cpu_to_le16(active_dwell); + scan_ch->passive_dwell = cpu_to_le16(passive_dwell); + /* Set txpower levels to defaults */ + scan_ch->dsp_atten = 110; + if (band == IEEE80211_BAND_5GHZ) + scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; + else + scan_ch->tx_gain = ((1 << 5) | (5 << 3)); + added++; + } else + IWL_ERR(priv, "no valid channel found\n"); + return added; +} + +static int iwl4965_get_channels_for_scan(struct iwl_priv *priv, + struct ieee80211_vif *vif, + enum ieee80211_band band, + u8 is_active, u8 n_probes, + struct iwl_scan_channel *scan_ch) +{ + struct ieee80211_channel *chan; + const struct ieee80211_supported_band *sband; + const struct iwl_channel_info *ch_info; + u16 passive_dwell = 0; + u16 active_dwell = 0; + int added, i; + u16 channel; + + sband = iwl_get_hw_mode(priv, band); + if (!sband) + return 0; + + active_dwell = iwl_legacy_get_active_dwell_time(priv, band, n_probes); + passive_dwell = iwl_legacy_get_passive_dwell_time(priv, band, vif); + + if (passive_dwell <= active_dwell) + passive_dwell = active_dwell + 1; + + for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) { + chan = priv->scan_request->channels[i]; + + if (chan->band != band) + continue; + + channel = chan->hw_value; + scan_ch->channel = cpu_to_le16(channel); + + ch_info = iwl_legacy_get_channel_info(priv, band, channel); + if (!iwl_legacy_is_channel_valid(ch_info)) { + IWL_DEBUG_SCAN(priv, + "Channel %d is INVALID for this band.\n", + channel); + continue; + } + + if (!is_active || iwl_legacy_is_channel_passive(ch_info) || + (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)) + scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE; + else + scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE; + + if (n_probes) + scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes); + + scan_ch->active_dwell = cpu_to_le16(active_dwell); + scan_ch->passive_dwell = cpu_to_le16(passive_dwell); + + /* Set txpower levels to defaults */ + scan_ch->dsp_atten = 110; + + /* NOTE: if we were doing 6Mb OFDM for scans we'd use + * power level: + * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3; + */ + if (band == IEEE80211_BAND_5GHZ) + scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; + else + scan_ch->tx_gain = ((1 << 5) | (5 << 3)); + + IWL_DEBUG_SCAN(priv, "Scanning ch=%d prob=0x%X [%s %d]\n", + channel, le32_to_cpu(scan_ch->type), + (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ? + "ACTIVE" : "PASSIVE", + (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ? + active_dwell : passive_dwell); + + scan_ch++; + added++; + } + + IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added); + return added; +} + +int iwl4965_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif) +{ + struct iwl_host_cmd cmd = { + .id = REPLY_SCAN_CMD, + .len = sizeof(struct iwl_scan_cmd), + .flags = CMD_SIZE_HUGE, + }; + struct iwl_scan_cmd *scan; + struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; + u32 rate_flags = 0; + u16 cmd_len; + u16 rx_chain = 0; + enum ieee80211_band band; + u8 n_probes = 0; + u8 rx_ant = priv->hw_params.valid_rx_ant; + u8 rate; + bool is_active = false; + int chan_mod; + u8 active_chains; + u8 scan_tx_antennas = priv->hw_params.valid_tx_ant; + int ret; + + lockdep_assert_held(&priv->mutex); + + if (vif) + ctx = iwl_legacy_rxon_ctx_from_vif(vif); + + if (!priv->scan_cmd) { + priv->scan_cmd = kmalloc(sizeof(struct iwl_scan_cmd) + + IWL_MAX_SCAN_SIZE, GFP_KERNEL); + if (!priv->scan_cmd) { + IWL_DEBUG_SCAN(priv, + "fail to allocate memory for scan\n"); + return -ENOMEM; + } + } + scan = priv->scan_cmd; + memset(scan, 0, sizeof(struct iwl_scan_cmd) + IWL_MAX_SCAN_SIZE); + + scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH; + scan->quiet_time = IWL_ACTIVE_QUIET_TIME; + + if (iwl_legacy_is_any_associated(priv)) { + u16 interval = 0; + u32 extra; + u32 suspend_time = 100; + u32 scan_suspend_time = 100; + + IWL_DEBUG_INFO(priv, "Scanning while associated...\n"); + if (priv->is_internal_short_scan) + interval = 0; + else + interval = vif->bss_conf.beacon_int; + + scan->suspend_time = 0; + scan->max_out_time = cpu_to_le32(200 * 1024); + if (!interval) + interval = suspend_time; + + extra = (suspend_time / interval) << 22; + scan_suspend_time = (extra | + ((suspend_time % interval) * 1024)); + scan->suspend_time = cpu_to_le32(scan_suspend_time); + IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n", + scan_suspend_time, interval); + } + + if (priv->is_internal_short_scan) { + IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n"); + } else if (priv->scan_request->n_ssids) { + int i, p = 0; + IWL_DEBUG_SCAN(priv, "Kicking off active scan\n"); + for (i = 0; i < priv->scan_request->n_ssids; i++) { + /* always does wildcard anyway */ + if (!priv->scan_request->ssids[i].ssid_len) + continue; + scan->direct_scan[p].id = WLAN_EID_SSID; + scan->direct_scan[p].len = + priv->scan_request->ssids[i].ssid_len; + memcpy(scan->direct_scan[p].ssid, + priv->scan_request->ssids[i].ssid, + priv->scan_request->ssids[i].ssid_len); + n_probes++; + p++; + } + is_active = true; + } else + IWL_DEBUG_SCAN(priv, "Start passive scan.\n"); + + scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK; + scan->tx_cmd.sta_id = ctx->bcast_sta_id; + scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; + + switch (priv->scan_band) { + case IEEE80211_BAND_2GHZ: + scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; + chan_mod = le32_to_cpu( + priv->contexts[IWL_RXON_CTX_BSS].active.flags & + RXON_FLG_CHANNEL_MODE_MSK) + >> RXON_FLG_CHANNEL_MODE_POS; + if (chan_mod == CHANNEL_MODE_PURE_40) { + rate = IWL_RATE_6M_PLCP; + } else { + rate = IWL_RATE_1M_PLCP; + rate_flags = RATE_MCS_CCK_MSK; + } + break; + case IEEE80211_BAND_5GHZ: + rate = IWL_RATE_6M_PLCP; + break; + default: + IWL_WARN(priv, "Invalid scan band\n"); + return -EIO; + } + + /* + * If active scanning is requested but a certain channel is + * marked passive, we can do active scanning if we detect + * transmissions. + * + * There is an issue with some firmware versions that triggers + * a sysassert on a "good CRC threshold" of zero (== disabled), + * on a radar channel even though this means that we should NOT + * send probes. + * + * The "good CRC threshold" is the number of frames that we + * need to receive during our dwell time on a channel before + * sending out probes -- setting this to a huge value will + * mean we never reach it, but at the same time work around + * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER + * here instead of IWL_GOOD_CRC_TH_DISABLED. + */ + scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT : + IWL_GOOD_CRC_TH_NEVER; + + band = priv->scan_band; + + if (priv->cfg->scan_rx_antennas[band]) + rx_ant = priv->cfg->scan_rx_antennas[band]; + + if (priv->cfg->scan_tx_antennas[band]) + scan_tx_antennas = priv->cfg->scan_tx_antennas[band]; + + priv->scan_tx_ant[band] = iwl4965_toggle_tx_ant(priv, + priv->scan_tx_ant[band], + scan_tx_antennas); + rate_flags |= iwl4965_ant_idx_to_flags(priv->scan_tx_ant[band]); + scan->tx_cmd.rate_n_flags = iwl4965_hw_set_rate_n_flags(rate, rate_flags); + + /* In power save mode use one chain, otherwise use all chains */ + if (test_bit(STATUS_POWER_PMI, &priv->status)) { + /* rx_ant has been set to all valid chains previously */ + active_chains = rx_ant & + ((u8)(priv->chain_noise_data.active_chains)); + if (!active_chains) + active_chains = rx_ant; + + IWL_DEBUG_SCAN(priv, "chain_noise_data.active_chains: %u\n", + priv->chain_noise_data.active_chains); + + rx_ant = iwl4965_first_antenna(active_chains); + } + + /* MIMO is not used here, but value is required */ + rx_chain |= priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS; + rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS; + rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS; + rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS; + scan->rx_chain = cpu_to_le16(rx_chain); + if (!priv->is_internal_short_scan) { + cmd_len = iwl_legacy_fill_probe_req(priv, + (struct ieee80211_mgmt *)scan->data, + vif->addr, + priv->scan_request->ie, + priv->scan_request->ie_len, + IWL_MAX_SCAN_SIZE - sizeof(*scan)); + } else { + /* use bcast addr, will not be transmitted but must be valid */ + cmd_len = iwl_legacy_fill_probe_req(priv, + (struct ieee80211_mgmt *)scan->data, + iwlegacy_bcast_addr, NULL, 0, + IWL_MAX_SCAN_SIZE - sizeof(*scan)); + + } + scan->tx_cmd.len = cpu_to_le16(cmd_len); + + scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK | + RXON_FILTER_BCON_AWARE_MSK); + + if (priv->is_internal_short_scan) { + scan->channel_count = + iwl4965_get_single_channel_for_scan(priv, vif, band, + (void *)&scan->data[le16_to_cpu( + scan->tx_cmd.len)]); + } else { + scan->channel_count = + iwl4965_get_channels_for_scan(priv, vif, band, + is_active, n_probes, + (void *)&scan->data[le16_to_cpu( + scan->tx_cmd.len)]); + } + if (scan->channel_count == 0) { + IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count); + return -EIO; + } + + cmd.len += le16_to_cpu(scan->tx_cmd.len) + + scan->channel_count * sizeof(struct iwl_scan_channel); + cmd.data = scan; + scan->len = cpu_to_le16(cmd.len); + + set_bit(STATUS_SCAN_HW, &priv->status); + + ret = iwl_legacy_send_cmd_sync(priv, &cmd); + if (ret) + clear_bit(STATUS_SCAN_HW, &priv->status); + + return ret; +} + +int iwl4965_manage_ibss_station(struct iwl_priv *priv, + struct ieee80211_vif *vif, bool add) +{ + struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv; + + if (add) + return iwl4965_add_bssid_station(priv, vif_priv->ctx, + vif->bss_conf.bssid, + &vif_priv->ibss_bssid_sta_id); + return iwl_legacy_remove_station(priv, vif_priv->ibss_bssid_sta_id, + vif->bss_conf.bssid); +} + +void iwl4965_free_tfds_in_queue(struct iwl_priv *priv, + int sta_id, int tid, int freed) +{ + lockdep_assert_held(&priv->sta_lock); + + if (priv->stations[sta_id].tid[tid].tfds_in_queue >= freed) + priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; + else { + IWL_DEBUG_TX(priv, "free more than tfds_in_queue (%u:%d)\n", + priv->stations[sta_id].tid[tid].tfds_in_queue, + freed); + priv->stations[sta_id].tid[tid].tfds_in_queue = 0; + } +} + +#define IWL_TX_QUEUE_MSK 0xfffff + +static bool iwl4965_is_single_rx_stream(struct iwl_priv *priv) +{ + return priv->current_ht_config.smps == IEEE80211_SMPS_STATIC || + priv->current_ht_config.single_chain_sufficient; +} + +#define IWL_NUM_RX_CHAINS_MULTIPLE 3 +#define IWL_NUM_RX_CHAINS_SINGLE 2 +#define IWL_NUM_IDLE_CHAINS_DUAL 2 +#define IWL_NUM_IDLE_CHAINS_SINGLE 1 + +/* + * Determine how many receiver/antenna chains to use. + * + * More provides better reception via diversity. Fewer saves power + * at the expense of throughput, but only when not in powersave to + * start with. + * + * MIMO (dual stream) requires at least 2, but works better with 3. + * This does not determine *which* chains to use, just how many. + */ +static int iwl4965_get_active_rx_chain_count(struct iwl_priv *priv) +{ + /* # of Rx chains to use when expecting MIMO. */ + if (iwl4965_is_single_rx_stream(priv)) + return IWL_NUM_RX_CHAINS_SINGLE; + else + return IWL_NUM_RX_CHAINS_MULTIPLE; +} + +/* + * When we are in power saving mode, unless device support spatial + * multiplexing power save, use the active count for rx chain count. + */ +static int +iwl4965_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt) +{ + /* # Rx chains when idling, depending on SMPS mode */ + switch (priv->current_ht_config.smps) { + case IEEE80211_SMPS_STATIC: + case IEEE80211_SMPS_DYNAMIC: + return IWL_NUM_IDLE_CHAINS_SINGLE; + case IEEE80211_SMPS_OFF: + return active_cnt; + default: + WARN(1, "invalid SMPS mode %d", + priv->current_ht_config.smps); + return active_cnt; + } +} + +/* up to 4 chains */ +static u8 iwl4965_count_chain_bitmap(u32 chain_bitmap) +{ + u8 res; + res = (chain_bitmap & BIT(0)) >> 0; + res += (chain_bitmap & BIT(1)) >> 1; + res += (chain_bitmap & BIT(2)) >> 2; + res += (chain_bitmap & BIT(3)) >> 3; + return res; +} + +/** + * iwl4965_set_rxon_chain - Set up Rx chain usage in "staging" RXON image + * + * Selects how many and which Rx receivers/antennas/chains to use. + * This should not be used for scan command ... it puts data in wrong place. + */ +void iwl4965_set_rxon_chain(struct iwl_priv *priv, struct iwl_rxon_context *ctx) +{ + bool is_single = iwl4965_is_single_rx_stream(priv); + bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); + u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt; + u32 active_chains; + u16 rx_chain; + + /* Tell uCode which antennas are actually connected. + * Before first association, we assume all antennas are connected. + * Just after first association, iwl4965_chain_noise_calibration() + * checks which antennas actually *are* connected. */ + if (priv->chain_noise_data.active_chains) + active_chains = priv->chain_noise_data.active_chains; + else + active_chains = priv->hw_params.valid_rx_ant; + + rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS; + + /* How many receivers should we use? */ + active_rx_cnt = iwl4965_get_active_rx_chain_count(priv); + idle_rx_cnt = iwl4965_get_idle_rx_chain_count(priv, active_rx_cnt); + + + /* correct rx chain count according hw settings + * and chain noise calibration + */ + valid_rx_cnt = iwl4965_count_chain_bitmap(active_chains); + if (valid_rx_cnt < active_rx_cnt) + active_rx_cnt = valid_rx_cnt; + + if (valid_rx_cnt < idle_rx_cnt) + idle_rx_cnt = valid_rx_cnt; + + rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS; + rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS; + + ctx->staging.rx_chain = cpu_to_le16(rx_chain); + + if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam) + ctx->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; + else + ctx->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; + + IWL_DEBUG_ASSOC(priv, "rx_chain=0x%X active=%d idle=%d\n", + ctx->staging.rx_chain, + active_rx_cnt, idle_rx_cnt); + + WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 || + active_rx_cnt < idle_rx_cnt); +} + +u8 iwl4965_toggle_tx_ant(struct iwl_priv *priv, u8 ant, u8 valid) +{ + int i; + u8 ind = ant; + + for (i = 0; i < RATE_ANT_NUM - 1; i++) { + ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0; + if (valid & BIT(ind)) + return ind; + } + return ant; +} + +static const char *iwl4965_get_fh_string(int cmd) +{ + switch (cmd) { + IWL_CMD(FH_RSCSR_CHNL0_STTS_WPTR_REG); + IWL_CMD(FH_RSCSR_CHNL0_RBDCB_BASE_REG); + IWL_CMD(FH_RSCSR_CHNL0_WPTR); + IWL_CMD(FH_MEM_RCSR_CHNL0_CONFIG_REG); + IWL_CMD(FH_MEM_RSSR_SHARED_CTRL_REG); + IWL_CMD(FH_MEM_RSSR_RX_STATUS_REG); + IWL_CMD(FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV); + IWL_CMD(FH_TSSR_TX_STATUS_REG); + IWL_CMD(FH_TSSR_TX_ERROR_REG); + default: + return "UNKNOWN"; + } +} + +int iwl4965_dump_fh(struct iwl_priv *priv, char **buf, bool display) +{ + int i; +#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG + int pos = 0; + size_t bufsz = 0; +#endif + static const u32 fh_tbl[] = { + FH_RSCSR_CHNL0_STTS_WPTR_REG, + FH_RSCSR_CHNL0_RBDCB_BASE_REG, + FH_RSCSR_CHNL0_WPTR, + FH_MEM_RCSR_CHNL0_CONFIG_REG, + FH_MEM_RSSR_SHARED_CTRL_REG, + FH_MEM_RSSR_RX_STATUS_REG, + FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV, + FH_TSSR_TX_STATUS_REG, + FH_TSSR_TX_ERROR_REG + }; +#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG + if (display) { + bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40; + *buf = kmalloc(bufsz, GFP_KERNEL); + if (!*buf) + return -ENOMEM; + pos += scnprintf(*buf + pos, bufsz - pos, + "FH register values:\n"); + for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { + pos += scnprintf(*buf + pos, bufsz - pos, + " %34s: 0X%08x\n", + iwl4965_get_fh_string(fh_tbl[i]), + iwl_legacy_read_direct32(priv, fh_tbl[i])); + } + return pos; + } +#endif + IWL_ERR(priv, "FH register values:\n"); + for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) { + IWL_ERR(priv, " %34s: 0X%08x\n", + iwl4965_get_fh_string(fh_tbl[i]), + iwl_legacy_read_direct32(priv, fh_tbl[i])); + } + return 0; +} |