iwlegacy: merge common .c files

Merge iwl-{tx,rx,sta,scan,power,eeprom,led,hcmd}.c into common.c .

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>

1 files changed, 0 insertions, 205 deletions

diff --git a/drivers/net/wireless/iwlegacy/iwl-led.c b/drivers/net/wireless/iwlegacy/iwl-led.c
deleted file mode 100644
index a840c2e5476..00000000000
--- a/drivers/net/wireless/iwlegacy/iwl-led.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <net/mac80211.h>
-#include <linux/etherdevice.h>
-#include <asm/unaligned.h>
-
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-io.h"
-
-/* default: IL_LED_BLINK(0) using blinking idx table */
-static int led_mode;
-module_param(led_mode, int, S_IRUGO);
-MODULE_PARM_DESC(led_mode, "0=system default, "
-		"1=On(RF On)/Off(RF Off), 2=blinking");
-
-/* Throughput		OFF time(ms)	ON time (ms)
- *	>300			25		25
- *	>200 to 300		40		40
- *	>100 to 200		55		55
- *	>70 to 100		65		65
- *	>50 to 70		75		75
- *	>20 to 50		85		85
- *	>10 to 20		95		95
- *	>5 to 10		110		110
- *	>1 to 5			130		130
- *	>0 to 1			167		167
- *	<=0					SOLID ON
- */
-static const struct ieee80211_tpt_blink il_blink[] = {
-	{ .throughput = 0, .blink_time = 334 },
-	{ .throughput = 1 * 1024 - 1, .blink_time = 260 },
-	{ .throughput = 5 * 1024 - 1, .blink_time = 220 },
-	{ .throughput = 10 * 1024 - 1, .blink_time = 190 },
-	{ .throughput = 20 * 1024 - 1, .blink_time = 170 },
-	{ .throughput = 50 * 1024 - 1, .blink_time = 150 },
-	{ .throughput = 70 * 1024 - 1, .blink_time = 130 },
-	{ .throughput = 100 * 1024 - 1, .blink_time = 110 },
-	{ .throughput = 200 * 1024 - 1, .blink_time = 80 },
-	{ .throughput = 300 * 1024 - 1, .blink_time = 50 },
-};
-
-/*
- * Adjust led blink rate to compensate on a MAC Clock difference on every HW
- * Led blink rate analysis showed an average deviation of 0% on 3945,
- * 5% on 4965 HW.
- * Need to compensate on the led on/off time per HW according to the deviation
- * to achieve the desired led frequency
- * The calculation is: (100-averageDeviation)/100 * blinkTime
- * For code efficiency the calculation will be:
- *     compensation = (100 - averageDeviation) * 64 / 100
- *     NewBlinkTime = (compensation * BlinkTime) / 64
- */
-static inline u8 il_blink_compensation(struct il_priv *il,
-				    u8 time, u16 compensation)
-{
-	if (!compensation) {
-		IL_ERR("undefined blink compensation: "
-			"use pre-defined blinking time\n");
-		return time;
-	}
-
-	return (u8)((time * compensation) >> 6);
-}
-
-/* Set led pattern command */
-static int il_led_cmd(struct il_priv *il,
-		       unsigned long on,
-		       unsigned long off)
-{
-	struct il_led_cmd led_cmd = {
-		.id = IL_LED_LINK,
-		.interval = IL_DEF_LED_INTRVL
-	};
-	int ret;
-
-	if (!test_bit(S_READY, &il->status))
-		return -EBUSY;
-
-	if (il->blink_on == on && il->blink_off == off)
-		return 0;
-
-	if (off == 0) {
-		/* led is SOLID_ON */
-		on = IL_LED_SOLID;
-	}
-
-	D_LED("Led blink time compensation=%u\n",
-			il->cfg->base_params->led_compensation);
-	led_cmd.on = il_blink_compensation(il, on,
-				il->cfg->base_params->led_compensation);
-	led_cmd.off = il_blink_compensation(il, off,
-				il->cfg->base_params->led_compensation);
-
-	ret = il->cfg->ops->led->cmd(il, &led_cmd);
-	if (!ret) {
-		il->blink_on = on;
-		il->blink_off = off;
-	}
-	return ret;
-}
-
-static void il_led_brightness_set(struct led_classdev *led_cdev,
-				   enum led_brightness brightness)
-{
-	struct il_priv *il = container_of(led_cdev, struct il_priv, led);
-	unsigned long on = 0;
-
-	if (brightness > 0)
-		on = IL_LED_SOLID;
-
-	il_led_cmd(il, on, 0);
-}
-
-static int il_led_blink_set(struct led_classdev *led_cdev,
-			     unsigned long *delay_on,
-			     unsigned long *delay_off)
-{
-	struct il_priv *il = container_of(led_cdev, struct il_priv, led);
-
-	return il_led_cmd(il, *delay_on, *delay_off);
-}
-
-void il_leds_init(struct il_priv *il)
-{
-	int mode = led_mode;
-	int ret;
-
-	if (mode == IL_LED_DEFAULT)
-		mode = il->cfg->led_mode;
-
-	il->led.name = kasprintf(GFP_KERNEL, "%s-led",
-				   wiphy_name(il->hw->wiphy));
-	il->led.brightness_set = il_led_brightness_set;
-	il->led.blink_set = il_led_blink_set;
-	il->led.max_brightness = 1;
-
-	switch (mode) {
-	case IL_LED_DEFAULT:
-		WARN_ON(1);
-		break;
-	case IL_LED_BLINK:
-		il->led.default_trigger =
-			ieee80211_create_tpt_led_trigger(il->hw,
-					IEEE80211_TPT_LEDTRIG_FL_CONNECTED,
-					il_blink, ARRAY_SIZE(il_blink));
-		break;
-	case IL_LED_RF_STATE:
-		il->led.default_trigger =
-			ieee80211_get_radio_led_name(il->hw);
-		break;
-	}
-
-	ret = led_classdev_register(&il->pci_dev->dev, &il->led);
-	if (ret) {
-		kfree(il->led.name);
-		return;
-	}
-
-	il->led_registered = true;
-}
-EXPORT_SYMBOL(il_leds_init);
-
-void il_leds_exit(struct il_priv *il)
-{
-	if (!il->led_registered)
-		return;
-
-	led_classdev_unregister(&il->led);
-	kfree(il->led.name);
-}
-EXPORT_SYMBOL(il_leds_exit);