mac80211: support secondary channel offset in CSA

Add support for the secondary channel offset IE in channel
switch announcements. This is necessary for proper handling
of CSA on HT access points.

For this to work it is also necessary to convert everything
here to use chandef structs instead of just channels. The
driver updates aren't really correct though. In particular,
the TI wl18xx driver update can't possibly be right since
it just ignores the new channel width for lack of firmware
API.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

2 files changed, 16 insertions, 18 deletions

diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c
index c092fcbbe96..cb5882ea5f3 100644
--- a/drivers/net/wireless/iwlegacy/4965-mac.c
+++ b/drivers/net/wireless/iwlegacy/4965-mac.c
@@ -6057,7 +6057,7 @@ il4965_mac_channel_switch(struct ieee80211_hw *hw,
 	struct il_priv *il = hw->priv;
 	const struct il_channel_info *ch_info;
 	struct ieee80211_conf *conf = &hw->conf;
-	struct ieee80211_channel *channel = ch_switch->channel;
+	struct ieee80211_channel *channel = ch_switch->chandef.chan;
 	struct il_ht_config *ht_conf = &il->current_ht_config;
 	u16 ch;
 
@@ -6094,23 +6094,21 @@ il4965_mac_channel_switch(struct ieee80211_hw *hw,
 	il->current_ht_config.smps = conf->smps_mode;
 
 	/* Configure HT40 channels */
-	il->ht.enabled = conf_is_ht(conf);
-	if (il->ht.enabled) {
-		if (conf_is_ht40_minus(conf)) {
-			il->ht.extension_chan_offset =
-			    IEEE80211_HT_PARAM_CHA_SEC_BELOW;
-			il->ht.is_40mhz = true;
-		} else if (conf_is_ht40_plus(conf)) {
-			il->ht.extension_chan_offset =
-			    IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
-			il->ht.is_40mhz = true;
-		} else {
-			il->ht.extension_chan_offset =
-			    IEEE80211_HT_PARAM_CHA_SEC_NONE;
-			il->ht.is_40mhz = false;
-		}
-	} else
+	switch (cfg80211_get_chandef_type(&ch_switch->chandef)) {
+	case NL80211_CHAN_NO_HT:
+	case NL80211_CHAN_HT20:
 		il->ht.is_40mhz = false;
+		il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
+		break;
+	case NL80211_CHAN_HT40MINUS:
+		il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW;
+		il->ht.is_40mhz = true;
+		break;
+	case NL80211_CHAN_HT40PLUS:
+		il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
+		il->ht.is_40mhz = true;
+		break;
+	}
 
 	if ((le16_to_cpu(il->staging.channel) != ch))
 		il->staging.flags = 0;
diff --git a/drivers/net/wireless/iwlegacy/4965.c b/drivers/net/wireless/iwlegacy/4965.c
index 91eb2d07fdb..777a578294b 100644
--- a/drivers/net/wireless/iwlegacy/4965.c
+++ b/drivers/net/wireless/iwlegacy/4965.c
@@ -1493,7 +1493,7 @@ il4965_hw_channel_switch(struct il_priv *il,
 
 	cmd.band = band;
 	cmd.expect_beacon = 0;
-	ch = ch_switch->channel->hw_value;
+	ch = ch_switch->chandef.chan->hw_value;
 	cmd.channel = cpu_to_le16(ch);
 	cmd.rxon_flags = il->staging.flags;
 	cmd.rxon_filter_flags = il->staging.filter_flags;