iwlwifi: refactor EEPROM reading/parsing

The EEPROM reading/parsing code is all mixed in
the driver today, and the EEPROM is parsed only
when we access data from it. This is problematic
because the NVM needs to be parsed and that is
independent of reading it. Also, the NVM format
for new devices will be different and probably
require a new parser.

Therefore refactor the reading and parsing and
create two independent components. Reading the
EEPROM requires direct hardware accesses and
therefore access to the transport, but parsing
is independent and can be done on an NVM blob.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

1 files changed, 6 insertions, 19 deletions

diff --git a/drivers/net/wireless/iwlwifi/dvm/ucode.c b/drivers/net/wireless/iwlwifi/dvm/ucode.c
index 5a2e186c7de..b3a314ba48c 100644
--- a/drivers/net/wireless/iwlwifi/dvm/ucode.c
+++ b/drivers/net/wireless/iwlwifi/dvm/ucode.c
@@ -61,8 +61,7 @@ iwl_get_ucode_image(struct iwl_priv *priv, enum iwl_ucode_type ucode_type)
 static int iwl_set_Xtal_calib(struct iwl_priv *priv)
 {
 	struct iwl_calib_xtal_freq_cmd cmd;
-	__le16 *xtal_calib =
-		(__le16 *)iwl_eeprom_query_addr(priv, EEPROM_XTAL);
+	__le16 *xtal_calib = priv->eeprom_data->xtal_calib;
 
 	iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD);
 	cmd.cap_pin1 = le16_to_cpu(xtal_calib[0]);
@@ -73,12 +72,10 @@ static int iwl_set_Xtal_calib(struct iwl_priv *priv)
 static int iwl_set_temperature_offset_calib(struct iwl_priv *priv)
 {
 	struct iwl_calib_temperature_offset_cmd cmd;
-	__le16 *offset_calib =
-		(__le16 *)iwl_eeprom_query_addr(priv, EEPROM_RAW_TEMPERATURE);
 
 	memset(&cmd, 0, sizeof(cmd));
 	iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD);
-	memcpy(&cmd.radio_sensor_offset, offset_calib, sizeof(*offset_calib));
+	cmd.radio_sensor_offset = priv->eeprom_data->raw_temperature;
 	if (!(cmd.radio_sensor_offset))
 		cmd.radio_sensor_offset = DEFAULT_RADIO_SENSOR_OFFSET;
 
@@ -90,27 +87,17 @@ static int iwl_set_temperature_offset_calib(struct iwl_priv *priv)
 static int iwl_set_temperature_offset_calib_v2(struct iwl_priv *priv)
 {
 	struct iwl_calib_temperature_offset_v2_cmd cmd;
-	__le16 *offset_calib_high = (__le16 *)iwl_eeprom_query_addr(priv,
-				     EEPROM_KELVIN_TEMPERATURE);
-	__le16 *offset_calib_low =
-		(__le16 *)iwl_eeprom_query_addr(priv, EEPROM_RAW_TEMPERATURE);
-	struct iwl_eeprom_calib_hdr *hdr;
 
 	memset(&cmd, 0, sizeof(cmd));
 	iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD);
-	hdr = (struct iwl_eeprom_calib_hdr *)iwl_eeprom_query_addr(priv,
-							EEPROM_CALIB_ALL);
-	memcpy(&cmd.radio_sensor_offset_high, offset_calib_high,
-		sizeof(*offset_calib_high));
-	memcpy(&cmd.radio_sensor_offset_low, offset_calib_low,
-		sizeof(*offset_calib_low));
-	if (!(cmd.radio_sensor_offset_low)) {
+	cmd.radio_sensor_offset_high = priv->eeprom_data->kelvin_temperature;
+	cmd.radio_sensor_offset_low = priv->eeprom_data->raw_temperature;
+	if (!cmd.radio_sensor_offset_low) {
 		IWL_DEBUG_CALIB(priv, "no info in EEPROM, use default\n");
 		cmd.radio_sensor_offset_low = DEFAULT_RADIO_SENSOR_OFFSET;
 		cmd.radio_sensor_offset_high = DEFAULT_RADIO_SENSOR_OFFSET;
 	}
-	memcpy(&cmd.burntVoltageRef, &hdr->voltage,
-		sizeof(hdr->voltage));
+	cmd.burntVoltageRef = priv->eeprom_data->calib_voltage;
 
 	IWL_DEBUG_CALIB(priv, "Radio sensor offset high: %d\n",
 			le16_to_cpu(cmd.radio_sensor_offset_high));