Merge remote-tracking branch 'wireless-next/master' into mac80211-next

26 files changed, 27889 insertions, 0 deletions

diff --git a/drivers/net/wireless/iwlwifi/dvm/Makefile b/drivers/net/wireless/iwlwifi/dvm/Makefile
new file mode 100644
index 00000000000..5ff76b20414
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/Makefile
@@ -0,0 +1,13 @@
+# DVM
+obj-$(CONFIG_IWLDVM)	+= iwldvm.o
+iwldvm-objs		+= main.o rs.o mac80211.o ucode.o tx.o
+iwldvm-objs		+= lib.o calib.o tt.o sta.o rx.o
+
+iwldvm-objs		+= power.o
+iwldvm-objs		+= scan.o led.o
+iwldvm-objs		+= rxon.o devices.o
+
+iwldvm-$(CONFIG_IWLWIFI_DEBUGFS) += debugfs.o
+iwldvm-$(CONFIG_IWLWIFI_DEVICE_TESTMODE) += testmode.o
+
+ccflags-y += -D__CHECK_ENDIAN__ -I$(src)/../
diff --git a/drivers/net/wireless/iwlwifi/dvm/agn.h b/drivers/net/wireless/iwlwifi/dvm/agn.h
new file mode 100644
index 00000000000..9bb16bdf6d2
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/agn.h
@@ -0,0 +1,529 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *****************************************************************************/
+
+#ifndef __iwl_agn_h__
+#define __iwl_agn_h__
+
+#include "iwl-config.h"
+
+#include "dev.h"
+
+/* The first 11 queues (0-10) are used otherwise */
+#define IWLAGN_FIRST_AMPDU_QUEUE	11
+
+/* AUX (TX during scan dwell) queue */
+#define IWL_AUX_QUEUE		10
+
+/* device operations */
+extern struct iwl_lib_ops iwl1000_lib;
+extern struct iwl_lib_ops iwl2000_lib;
+extern struct iwl_lib_ops iwl2030_lib;
+extern struct iwl_lib_ops iwl5000_lib;
+extern struct iwl_lib_ops iwl5150_lib;
+extern struct iwl_lib_ops iwl6000_lib;
+extern struct iwl_lib_ops iwl6030_lib;
+
+
+#define TIME_UNIT		1024
+
+/*****************************************************
+* DRIVER STATUS FUNCTIONS
+******************************************************/
+#define STATUS_RF_KILL_HW	0
+#define STATUS_CT_KILL		1
+#define STATUS_ALIVE		2
+#define STATUS_READY		3
+#define STATUS_EXIT_PENDING	5
+#define STATUS_STATISTICS	6
+#define STATUS_SCANNING		7
+#define STATUS_SCAN_ABORTING	8
+#define STATUS_SCAN_HW		9
+#define STATUS_FW_ERROR		10
+#define STATUS_CHANNEL_SWITCH_PENDING 11
+#define STATUS_SCAN_COMPLETE	12
+#define STATUS_POWER_PMI	13
+#define STATUS_SCAN_ROC_EXPIRED 14
+
+struct iwl_ucode_capabilities;
+
+extern struct ieee80211_ops iwlagn_hw_ops;
+
+static inline void iwl_set_calib_hdr(struct iwl_calib_hdr *hdr, u8 cmd)
+{
+	hdr->op_code = cmd;
+	hdr->first_group = 0;
+	hdr->groups_num = 1;
+	hdr->data_valid = 1;
+}
+
+void iwl_down(struct iwl_priv *priv);
+void iwl_cancel_deferred_work(struct iwl_priv *priv);
+void iwlagn_prepare_restart(struct iwl_priv *priv);
+int __must_check iwl_rx_dispatch(struct iwl_op_mode *op_mode,
+				 struct iwl_rx_cmd_buffer *rxb,
+				 struct iwl_device_cmd *cmd);
+
+bool iwl_check_for_ct_kill(struct iwl_priv *priv);
+
+void iwlagn_lift_passive_no_rx(struct iwl_priv *priv);
+
+/* MAC80211 */
+struct ieee80211_hw *iwl_alloc_all(void);
+int iwlagn_mac_setup_register(struct iwl_priv *priv,
+			      const struct iwl_ucode_capabilities *capa);
+void iwlagn_mac_unregister(struct iwl_priv *priv);
+
+/* commands */
+int iwl_dvm_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd);
+int iwl_dvm_send_cmd_pdu(struct iwl_priv *priv, u8 id,
+			 u32 flags, u16 len, const void *data);
+
+/* RXON */
+void iwl_connection_init_rx_config(struct iwl_priv *priv,
+				   struct iwl_rxon_context *ctx);
+int iwlagn_set_pan_params(struct iwl_priv *priv);
+int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
+void iwlagn_set_rxon_chain(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
+int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed);
+void iwlagn_bss_info_changed(struct ieee80211_hw *hw,
+			     struct ieee80211_vif *vif,
+			     struct ieee80211_bss_conf *bss_conf,
+			     u32 changes);
+void iwlagn_config_ht40(struct ieee80211_conf *conf,
+			struct iwl_rxon_context *ctx);
+void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf);
+void iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch,
+			 struct iwl_rxon_context *ctx);
+void iwl_set_flags_for_band(struct iwl_priv *priv,
+			    struct iwl_rxon_context *ctx,
+			    enum ieee80211_band band,
+			    struct ieee80211_vif *vif);
+
+/* uCode */
+int iwl_send_bt_env(struct iwl_priv *priv, u8 action, u8 type);
+void iwl_send_prio_tbl(struct iwl_priv *priv);
+int iwl_init_alive_start(struct iwl_priv *priv);
+int iwl_run_init_ucode(struct iwl_priv *priv);
+int iwl_load_ucode_wait_alive(struct iwl_priv *priv,
+			      enum iwl_ucode_type ucode_type);
+int iwl_send_calib_results(struct iwl_priv *priv);
+int iwl_calib_set(struct iwl_priv *priv,
+		  const struct iwl_calib_hdr *cmd, int len);
+void iwl_calib_free_results(struct iwl_priv *priv);
+int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
+			    char **buf, bool display);
+int iwlagn_hw_valid_rtc_data_addr(u32 addr);
+
+/* lib */
+int iwlagn_send_tx_power(struct iwl_priv *priv);
+void iwlagn_temperature(struct iwl_priv *priv);
+int iwlagn_txfifo_flush(struct iwl_priv *priv, u16 flush_control);
+void iwlagn_dev_txfifo_flush(struct iwl_priv *priv, u16 flush_control);
+int iwlagn_send_beacon_cmd(struct iwl_priv *priv);
+int iwl_send_statistics_request(struct iwl_priv *priv,
+				u8 flags, bool clear);
+
+static inline const struct ieee80211_supported_band *iwl_get_hw_mode(
+			struct iwl_priv *priv, enum ieee80211_band band)
+{
+	return priv->hw->wiphy->bands[band];
+}
+
+#ifdef CONFIG_PM_SLEEP
+int iwlagn_send_patterns(struct iwl_priv *priv,
+			 struct cfg80211_wowlan *wowlan);
+int iwlagn_suspend(struct iwl_priv *priv, struct cfg80211_wowlan *wowlan);
+#endif
+
+/* rx */
+int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band);
+void iwl_setup_rx_handlers(struct iwl_priv *priv);
+void iwl_chswitch_done(struct iwl_priv *priv, bool is_success);
+
+
+/* tx */
+int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb);
+int iwlagn_tx_agg_start(struct iwl_priv *priv, struct ieee80211_vif *vif,
+			struct ieee80211_sta *sta, u16 tid, u16 *ssn);
+int iwlagn_tx_agg_oper(struct iwl_priv *priv, struct ieee80211_vif *vif,
+			struct ieee80211_sta *sta, u16 tid, u8 buf_size);
+int iwlagn_tx_agg_stop(struct iwl_priv *priv, struct ieee80211_vif *vif,
+		       struct ieee80211_sta *sta, u16 tid);
+int iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv,
+				   struct iwl_rx_cmd_buffer *rxb,
+				   struct iwl_device_cmd *cmd);
+int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb,
+			       struct iwl_device_cmd *cmd);
+
+static inline u32 iwl_tx_status_to_mac80211(u32 status)
+{
+	status &= TX_STATUS_MSK;
+
+	switch (status) {
+	case TX_STATUS_SUCCESS:
+	case TX_STATUS_DIRECT_DONE:
+		return IEEE80211_TX_STAT_ACK;
+	case TX_STATUS_FAIL_DEST_PS:
+	case TX_STATUS_FAIL_PASSIVE_NO_RX:
+		return IEEE80211_TX_STAT_TX_FILTERED;
+	default:
+		return 0;
+	}
+}
+
+static inline bool iwl_is_tx_success(u32 status)
+{
+	status &= TX_STATUS_MSK;
+	return (status == TX_STATUS_SUCCESS) ||
+	       (status == TX_STATUS_DIRECT_DONE);
+}
+
+u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant_idx, u8 valid);
+
+/* scan */
+void iwlagn_post_scan(struct iwl_priv *priv);
+void iwlagn_disable_roc(struct iwl_priv *priv);
+int iwl_force_rf_reset(struct iwl_priv *priv, bool external);
+void iwl_init_scan_params(struct iwl_priv *priv);
+int iwl_scan_cancel(struct iwl_priv *priv);
+void iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms);
+void iwl_force_scan_end(struct iwl_priv *priv);
+void iwl_internal_short_hw_scan(struct iwl_priv *priv);
+void iwl_setup_rx_scan_handlers(struct iwl_priv *priv);
+void iwl_setup_scan_deferred_work(struct iwl_priv *priv);
+void iwl_cancel_scan_deferred_work(struct iwl_priv *priv);
+int __must_check iwl_scan_initiate(struct iwl_priv *priv,
+				   struct ieee80211_vif *vif,
+				   enum iwl_scan_type scan_type,
+				   enum ieee80211_band band);
+
+void iwl_scan_roc_expired(struct iwl_priv *priv);
+void iwl_scan_offchannel_skb(struct iwl_priv *priv);
+void iwl_scan_offchannel_skb_status(struct iwl_priv *priv);
+
+/* For faster active scanning, scan will move to the next channel if fewer than
+ * PLCP_QUIET_THRESH packets are heard on this channel within
+ * ACTIVE_QUIET_TIME after sending probe request.  This shortens the dwell
+ * time if it's a quiet channel (nothing responded to our probe, and there's
+ * no other traffic).
+ * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
+#define IWL_ACTIVE_QUIET_TIME       cpu_to_le16(10)  /* msec */
+#define IWL_PLCP_QUIET_THRESH       cpu_to_le16(1)  /* packets */
+
+#define IWL_SCAN_CHECK_WATCHDOG		(HZ * 15)
+
+
+/* bt coex */
+void iwlagn_send_advance_bt_config(struct iwl_priv *priv);
+int iwlagn_bt_coex_profile_notif(struct iwl_priv *priv,
+				  struct iwl_rx_cmd_buffer *rxb,
+				  struct iwl_device_cmd *cmd);
+void iwlagn_bt_rx_handler_setup(struct iwl_priv *priv);
+void iwlagn_bt_setup_deferred_work(struct iwl_priv *priv);
+void iwlagn_bt_cancel_deferred_work(struct iwl_priv *priv);
+void iwlagn_bt_coex_rssi_monitor(struct iwl_priv *priv);
+void iwlagn_bt_adjust_rssi_monitor(struct iwl_priv *priv, bool rssi_ena);
+
+static inline bool iwl_advanced_bt_coexist(struct iwl_priv *priv)
+{
+	return priv->cfg->bt_params &&
+	       priv->cfg->bt_params->advanced_bt_coexist;
+}
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+const char *iwl_get_tx_fail_reason(u32 status);
+const char *iwl_get_agg_tx_fail_reason(u16 status);
+#else
+static inline const char *iwl_get_tx_fail_reason(u32 status) { return ""; }
+static inline const char *iwl_get_agg_tx_fail_reason(u16 status) { return ""; }
+#endif
+
+
+/* station management */
+int iwlagn_manage_ibss_station(struct iwl_priv *priv,
+			       struct ieee80211_vif *vif, bool add);
+#define IWL_STA_DRIVER_ACTIVE BIT(0) /* driver entry is active */
+#define IWL_STA_UCODE_ACTIVE  BIT(1) /* ucode entry is active */
+#define IWL_STA_UCODE_INPROGRESS  BIT(2) /* ucode entry is in process of
+					    being activated */
+#define IWL_STA_LOCAL BIT(3) /* station state not directed by mac80211;
+				(this is for the IBSS BSSID stations) */
+#define IWL_STA_BCAST BIT(4) /* this station is the special bcast station */
+
+
+void iwl_restore_stations(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
+void iwl_clear_ucode_stations(struct iwl_priv *priv,
+			      struct iwl_rxon_context *ctx);
+void iwl_dealloc_bcast_stations(struct iwl_priv *priv);
+int iwl_get_free_ucode_key_offset(struct iwl_priv *priv);
+int iwl_send_add_sta(struct iwl_priv *priv,
+		     struct iwl_addsta_cmd *sta, u8 flags);
+int iwl_add_station_common(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
+			   const u8 *addr, bool is_ap,
+			   struct ieee80211_sta *sta, u8 *sta_id_r);
+int iwl_remove_station(struct iwl_priv *priv, const u8 sta_id,
+		       const u8 *addr);
+void iwl_deactivate_station(struct iwl_priv *priv, const u8 sta_id,
+			    const u8 *addr);
+u8 iwl_prep_station(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
+		    const u8 *addr, bool is_ap, struct ieee80211_sta *sta);
+
+int iwl_send_lq_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
+		    struct iwl_link_quality_cmd *lq, u8 flags, bool init);
+int iwl_add_sta_callback(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb,
+			       struct iwl_device_cmd *cmd);
+int iwl_sta_update_ht(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
+		      struct ieee80211_sta *sta);
+
+bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv,
+			    struct iwl_rxon_context *ctx,
+			    struct ieee80211_sta_ht_cap *ht_cap);
+
+static inline int iwl_sta_id(struct ieee80211_sta *sta)
+{
+	if (WARN_ON(!sta))
+		return IWL_INVALID_STATION;
+
+	return ((struct iwl_station_priv *)sta->drv_priv)->sta_id;
+}
+
+int iwlagn_alloc_bcast_station(struct iwl_priv *priv,
+			       struct iwl_rxon_context *ctx);
+int iwlagn_add_bssid_station(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
+			     const u8 *addr, u8 *sta_id_r);
+int iwl_remove_default_wep_key(struct iwl_priv *priv,
+			       struct iwl_rxon_context *ctx,
+			       struct ieee80211_key_conf *key);
+int iwl_set_default_wep_key(struct iwl_priv *priv,
+			    struct iwl_rxon_context *ctx,
+			    struct ieee80211_key_conf *key);
+int iwl_restore_default_wep_keys(struct iwl_priv *priv,
+				 struct iwl_rxon_context *ctx);
+int iwl_set_dynamic_key(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
+			struct ieee80211_key_conf *key,
+			struct ieee80211_sta *sta);
+int iwl_remove_dynamic_key(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
+			   struct ieee80211_key_conf *key,
+			   struct ieee80211_sta *sta);
+void iwl_update_tkip_key(struct iwl_priv *priv,
+			 struct ieee80211_vif *vif,
+			 struct ieee80211_key_conf *keyconf,
+			 struct ieee80211_sta *sta, u32 iv32, u16 *phase1key);
+int iwl_sta_tx_modify_enable_tid(struct iwl_priv *priv, int sta_id, int tid);
+int iwl_sta_rx_agg_start(struct iwl_priv *priv, struct ieee80211_sta *sta,
+			 int tid, u16 ssn);
+int iwl_sta_rx_agg_stop(struct iwl_priv *priv, struct ieee80211_sta *sta,
+			int tid);
+void iwl_sta_modify_sleep_tx_count(struct iwl_priv *priv, int sta_id, int cnt);
+int iwl_update_bcast_station(struct iwl_priv *priv,
+			     struct iwl_rxon_context *ctx);
+int iwl_update_bcast_stations(struct iwl_priv *priv);
+
+/* rate */
+static inline u32 iwl_ant_idx_to_flags(u8 ant_idx)
+{
+	return BIT(ant_idx) << RATE_MCS_ANT_POS;
+}
+
+static inline u8 iwl_hw_get_rate(__le32 rate_n_flags)
+{
+	return le32_to_cpu(rate_n_flags) & RATE_MCS_RATE_MSK;
+}
+
+static inline __le32 iwl_hw_set_rate_n_flags(u8 rate, u32 flags)
+{
+	return cpu_to_le32(flags|(u32)rate);
+}
+
+extern int iwl_alive_start(struct iwl_priv *priv);
+
+/* testmode support */
+#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
+
+extern int iwlagn_mac_testmode_cmd(struct ieee80211_hw *hw, void *data,
+				   int len);
+extern int iwlagn_mac_testmode_dump(struct ieee80211_hw *hw,
+				    struct sk_buff *skb,
+				    struct netlink_callback *cb,
+				    void *data, int len);
+extern void iwl_testmode_init(struct iwl_priv *priv);
+extern void iwl_testmode_free(struct iwl_priv *priv);
+
+#else
+
+static inline
+int iwlagn_mac_testmode_cmd(struct ieee80211_hw *hw, void *data, int len)
+{
+	return -ENOSYS;
+}
+
+static inline
+int iwlagn_mac_testmode_dump(struct ieee80211_hw *hw, struct sk_buff *skb,
+		      struct netlink_callback *cb,
+		      void *data, int len)
+{
+	return -ENOSYS;
+}
+
+static inline void iwl_testmode_init(struct iwl_priv *priv)
+{
+}
+
+static inline void iwl_testmode_free(struct iwl_priv *priv)
+{
+}
+#endif
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+void iwl_print_rx_config_cmd(struct iwl_priv *priv,
+			     enum iwl_rxon_context_id ctxid);
+#else
+static inline void iwl_print_rx_config_cmd(struct iwl_priv *priv,
+					   enum iwl_rxon_context_id ctxid)
+{
+}
+#endif
+
+/* status checks */
+
+static inline int iwl_is_ready(struct iwl_priv *priv)
+{
+	/* The adapter is 'ready' if READY EXIT_PENDING is not set */
+	return test_bit(STATUS_READY, &priv->status) &&
+	       !test_bit(STATUS_EXIT_PENDING, &priv->status);
+}
+
+static inline int iwl_is_alive(struct iwl_priv *priv)
+{
+	return test_bit(STATUS_ALIVE, &priv->status);
+}
+
+static inline int iwl_is_rfkill(struct iwl_priv *priv)
+{
+	return test_bit(STATUS_RF_KILL_HW, &priv->status);
+}
+
+static inline int iwl_is_ctkill(struct iwl_priv *priv)
+{
+	return test_bit(STATUS_CT_KILL, &priv->status);
+}
+
+static inline int iwl_is_ready_rf(struct iwl_priv *priv)
+{
+	if (iwl_is_rfkill(priv))
+		return 0;
+
+	return iwl_is_ready(priv);
+}
+
+static inline void iwl_dvm_set_pmi(struct iwl_priv *priv, bool state)
+{
+	if (state)
+		set_bit(STATUS_POWER_PMI, &priv->status);
+	else
+		clear_bit(STATUS_POWER_PMI, &priv->status);
+	iwl_trans_set_pmi(priv->trans, state);
+}
+
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+int iwl_dbgfs_register(struct iwl_priv *priv, const char *name);
+void iwl_dbgfs_unregister(struct iwl_priv *priv);
+#else
+static inline int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
+{
+	return 0;
+}
+static inline void iwl_dbgfs_unregister(struct iwl_priv *priv)
+{
+}
+#endif /* CONFIG_IWLWIFI_DEBUGFS */
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+#define IWL_DEBUG_QUIET_RFKILL(m, fmt, args...)	\
+do {									\
+	if (!iwl_is_rfkill((m)))					\
+		IWL_ERR(m, fmt, ##args);				\
+	else								\
+		__iwl_err((m)->dev, true,				\
+			  !iwl_have_debug_level(IWL_DL_RADIO),		\
+			  fmt, ##args);					\
+} while (0)
+#else
+#define IWL_DEBUG_QUIET_RFKILL(m, fmt, args...)	\
+do {									\
+	if (!iwl_is_rfkill((m)))					\
+		IWL_ERR(m, fmt, ##args);				\
+	else								\
+		__iwl_err((m)->dev, true, true, fmt, ##args);	\
+} while (0)
+#endif				/* CONFIG_IWLWIFI_DEBUG */
+
+extern const char *iwl_dvm_cmd_strings[REPLY_MAX];
+
+static inline const char *iwl_dvm_get_cmd_string(u8 cmd)
+{
+	const char *s = iwl_dvm_cmd_strings[cmd];
+	if (s)
+		return s;
+	return "UNKNOWN";
+}
+#endif /* __iwl_agn_h__ */
diff --git a/drivers/net/wireless/iwlwifi/dvm/calib.c b/drivers/net/wireless/iwlwifi/dvm/calib.c
new file mode 100644
index 00000000000..f2dd671d7dc
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/calib.c
@@ -0,0 +1,1114 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *****************************************************************************/
+
+#include <linux/slab.h>
+#include <net/mac80211.h>
+
+#include "iwl-trans.h"
+
+#include "dev.h"
+#include "calib.h"
+#include "agn.h"
+
+/*****************************************************************************
+ * INIT calibrations framework
+ *****************************************************************************/
+
+/* Opaque calibration results */
+struct iwl_calib_result {
+	struct list_head list;
+	size_t cmd_len;
+	struct iwl_calib_hdr hdr;
+	/* data follows */
+};
+
+struct statistics_general_data {
+	u32 beacon_silence_rssi_a;
+	u32 beacon_silence_rssi_b;
+	u32 beacon_silence_rssi_c;
+	u32 beacon_energy_a;
+	u32 beacon_energy_b;
+	u32 beacon_energy_c;
+};
+
+int iwl_send_calib_results(struct iwl_priv *priv)
+{
+	struct iwl_host_cmd hcmd = {
+		.id = REPLY_PHY_CALIBRATION_CMD,
+		.flags = CMD_SYNC,
+	};
+	struct iwl_calib_result *res;
+
+	list_for_each_entry(res, &priv->calib_results, list) {
+		int ret;
+
+		hcmd.len[0] = res->cmd_len;
+		hcmd.data[0] = &res->hdr;
+		hcmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY;
+		ret = iwl_dvm_send_cmd(priv, &hcmd);
+		if (ret) {
+			IWL_ERR(priv, "Error %d on calib cmd %d\n",
+				ret, res->hdr.op_code);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+int iwl_calib_set(struct iwl_priv *priv,
+		  const struct iwl_calib_hdr *cmd, int len)
+{
+	struct iwl_calib_result *res, *tmp;
+
+	res = kmalloc(sizeof(*res) + len - sizeof(struct iwl_calib_hdr),
+		      GFP_ATOMIC);
+	if (!res)
+		return -ENOMEM;
+	memcpy(&res->hdr, cmd, len);
+	res->cmd_len = len;
+
+	list_for_each_entry(tmp, &priv->calib_results, list) {
+		if (tmp->hdr.op_code == res->hdr.op_code) {
+			list_replace(&tmp->list, &res->list);
+			kfree(tmp);
+			return 0;
+		}
+	}
+
+	/* wasn't in list already */
+	list_add_tail(&res->list, &priv->calib_results);
+
+	return 0;
+}
+
+void iwl_calib_free_results(struct iwl_priv *priv)
+{
+	struct iwl_calib_result *res, *tmp;
+
+	list_for_each_entry_safe(res, tmp, &priv->calib_results, list) {
+		list_del(&res->list);
+		kfree(res);
+	}
+}
+
+/*****************************************************************************
+ * RUNTIME calibrations framework
+ *****************************************************************************/
+
+/* "false alarms" are signals that our DSP tries to lock onto,
+ *   but then determines that they are either noise, or transmissions
+ *   from a distant wireless network (also "noise", really) that get
+ *   "stepped on" by stronger transmissions within our own network.
+ * This algorithm attempts to set a sensitivity level that is high
+ *   enough to receive all of our own network traffic, but not so
+ *   high that our DSP gets too busy trying to lock onto non-network
+ *   activity/noise. */
+static int iwl_sens_energy_cck(struct iwl_priv *priv,
+				   u32 norm_fa,
+				   u32 rx_enable_time,
+				   struct statistics_general_data *rx_info)
+{
+	u32 max_nrg_cck = 0;
+	int i = 0;
+	u8 max_silence_rssi = 0;
+	u32 silence_ref = 0;
+	u8 silence_rssi_a = 0;
+	u8 silence_rssi_b = 0;
+	u8 silence_rssi_c = 0;
+	u32 val;
+
+	/* "false_alarms" values below are cross-multiplications to assess the
+	 *   numbers of false alarms within the measured period of actual Rx
+	 *   (Rx is off when we're txing), vs the min/max expected false alarms
+	 *   (some should be expected if rx is sensitive enough) in a
+	 *   hypothetical listening period of 200 time units (TU), 204.8 msec:
+	 *
+	 * MIN_FA/fixed-time < false_alarms/actual-rx-time < MAX_FA/beacon-time
+	 *
+	 * */
+	u32 false_alarms = norm_fa * 200 * 1024;
+	u32 max_false_alarms = MAX_FA_CCK * rx_enable_time;
+	u32 min_false_alarms = MIN_FA_CCK * rx_enable_time;
+	struct iwl_sensitivity_data *data = NULL;
+	const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens;
+
+	data = &(priv->sensitivity_data);
+
+	data->nrg_auto_corr_silence_diff = 0;
+
+	/* Find max silence rssi among all 3 receivers.
+	 * This is background noise, which may include transmissions from other
+	 *    networks, measured during silence before our network's beacon */
+	silence_rssi_a = (u8)((rx_info->beacon_silence_rssi_a &
+			    ALL_BAND_FILTER) >> 8);
+	silence_rssi_b = (u8)((rx_info->beacon_silence_rssi_b &
+			    ALL_BAND_FILTER) >> 8);
+	silence_rssi_c = (u8)((rx_info->beacon_silence_rssi_c &
+			    ALL_BAND_FILTER) >> 8);
+
+	val = max(silence_rssi_b, silence_rssi_c);
+	max_silence_rssi = max(silence_rssi_a, (u8) val);
+
+	/* Store silence rssi in 20-beacon history table */
+	data->nrg_silence_rssi[data->nrg_silence_idx] = max_silence_rssi;
+	data->nrg_silence_idx++;
+	if (data->nrg_silence_idx >= NRG_NUM_PREV_STAT_L)
+		data->nrg_silence_idx = 0;
+
+	/* Find max silence rssi across 20 beacon history */
+	for (i = 0; i < NRG_NUM_PREV_STAT_L; i++) {
+		val = data->nrg_silence_rssi[i];
+		silence_ref = max(silence_ref, val);
+	}
+	IWL_DEBUG_CALIB(priv, "silence a %u, b %u, c %u, 20-bcn max %u\n",
+			silence_rssi_a, silence_rssi_b, silence_rssi_c,
+			silence_ref);
+
+	/* Find max rx energy (min value!) among all 3 receivers,
+	 *   measured during beacon frame.
+	 * Save it in 10-beacon history table. */
+	i = data->nrg_energy_idx;
+	val = min(rx_info->beacon_energy_b, rx_info->beacon_energy_c);
+	data->nrg_value[i] = min(rx_info->beacon_energy_a, val);
+
+	data->nrg_energy_idx++;
+	if (data->nrg_energy_idx >= 10)
+		data->nrg_energy_idx = 0;
+
+	/* Find min rx energy (max value) across 10 beacon history.
+	 * This is the minimum signal level that we want to receive well.
+	 * Add backoff (margin so we don't miss slightly lower energy frames).
+	 * This establishes an upper bound (min value) for energy threshold. */
+	max_nrg_cck = data->nrg_value[0];
+	for (i = 1; i < 10; i++)
+		max_nrg_cck = (u32) max(max_nrg_cck, (data->nrg_value[i]));
+	max_nrg_cck += 6;
+
+	IWL_DEBUG_CALIB(priv, "rx energy a %u, b %u, c %u, 10-bcn max/min %u\n",
+			rx_info->beacon_energy_a, rx_info->beacon_energy_b,
+			rx_info->beacon_energy_c, max_nrg_cck - 6);
+
+	/* Count number of consecutive beacons with fewer-than-desired
+	 *   false alarms. */
+	if (false_alarms < min_false_alarms)
+		data->num_in_cck_no_fa++;
+	else
+		data->num_in_cck_no_fa = 0;
+	IWL_DEBUG_CALIB(priv, "consecutive bcns with few false alarms = %u\n",
+			data->num_in_cck_no_fa);
+
+	/* If we got too many false alarms this time, reduce sensitivity */
+	if ((false_alarms > max_false_alarms) &&
+		(data->auto_corr_cck > AUTO_CORR_MAX_TH_CCK)) {
+		IWL_DEBUG_CALIB(priv, "norm FA %u > max FA %u\n",
+		     false_alarms, max_false_alarms);
+		IWL_DEBUG_CALIB(priv, "... reducing sensitivity\n");
+		data->nrg_curr_state = IWL_FA_TOO_MANY;
+		/* Store for "fewer than desired" on later beacon */
+		data->nrg_silence_ref = silence_ref;
+
+		/* increase energy threshold (reduce nrg value)
+		 *   to decrease sensitivity */
+		data->nrg_th_cck = data->nrg_th_cck - NRG_STEP_CCK;
+	/* Else if we got fewer than desired, increase sensitivity */
+	} else if (false_alarms < min_false_alarms) {
+		data->nrg_curr_state = IWL_FA_TOO_FEW;
+
+		/* Compare silence level with silence level for most recent
+		 *   healthy number or too many false alarms */
+		data->nrg_auto_corr_silence_diff = (s32)data->nrg_silence_ref -
+						   (s32)silence_ref;
+
+		IWL_DEBUG_CALIB(priv, "norm FA %u < min FA %u, silence diff %d\n",
+			 false_alarms, min_false_alarms,
+			 data->nrg_auto_corr_silence_diff);
+
+		/* Increase value to increase sensitivity, but only if:
+		 * 1a) previous beacon did *not* have *too many* false alarms
+		 * 1b) AND there's a significant difference in Rx levels
+		 *      from a previous beacon with too many, or healthy # FAs
+		 * OR 2) We've seen a lot of beacons (100) with too few
+		 *       false alarms */
+		if ((data->nrg_prev_state != IWL_FA_TOO_MANY) &&
+			((data->nrg_auto_corr_silence_diff > NRG_DIFF) ||
+			(data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) {
+
+			IWL_DEBUG_CALIB(priv, "... increasing sensitivity\n");
+			/* Increase nrg value to increase sensitivity */
+			val = data->nrg_th_cck + NRG_STEP_CCK;
+			data->nrg_th_cck = min((u32)ranges->min_nrg_cck, val);
+		} else {
+			IWL_DEBUG_CALIB(priv, "... but not changing sensitivity\n");
+		}
+
+	/* Else we got a healthy number of false alarms, keep status quo */
+	} else {
+		IWL_DEBUG_CALIB(priv, " FA in safe zone\n");
+		data->nrg_curr_state = IWL_FA_GOOD_RANGE;
+
+		/* Store for use in "fewer than desired" with later beacon */
+		data->nrg_silence_ref = silence_ref;
+
+		/* If previous beacon had too many false alarms,
+		 *   give it some extra margin by reducing sensitivity again
+		 *   (but don't go below measured energy of desired Rx) */
+		if (IWL_FA_TOO_MANY == data->nrg_prev_state) {
+			IWL_DEBUG_CALIB(priv, "... increasing margin\n");
+			if (data->nrg_th_cck > (max_nrg_cck + NRG_MARGIN))
+				data->nrg_th_cck -= NRG_MARGIN;
+			else
+				data->nrg_th_cck = max_nrg_cck;
+		}
+	}
+
+	/* Make sure the energy threshold does not go above the measured
+	 * energy of the desired Rx signals (reduced by backoff margin),
+	 * or else we might start missing Rx frames.
+	 * Lower value is higher energy, so we use max()!
+	 */
+	data->nrg_th_cck = max(max_nrg_cck, data->nrg_th_cck);
+	IWL_DEBUG_CALIB(priv, "new nrg_th_cck %u\n", data->nrg_th_cck);
+
+	data->nrg_prev_state = data->nrg_curr_state;
+
+	/* Auto-correlation CCK algorithm */
+	if (false_alarms > min_false_alarms) {
+
+		/* increase auto_corr values to decrease sensitivity
+		 * so the DSP won't be disturbed by the noise
+		 */
+		if (data->auto_corr_cck < AUTO_CORR_MAX_TH_CCK)
+			data->auto_corr_cck = AUTO_CORR_MAX_TH_CCK + 1;
+		else {
+			val = data->auto_corr_cck + AUTO_CORR_STEP_CCK;
+			data->auto_corr_cck =
+				min((u32)ranges->auto_corr_max_cck, val);
+		}
+		val = data->auto_corr_cck_mrc + AUTO_CORR_STEP_CCK;
+		data->auto_corr_cck_mrc =
+			min((u32)ranges->auto_corr_max_cck_mrc, val);
+	} else if ((false_alarms < min_false_alarms) &&
+	   ((data->nrg_auto_corr_silence_diff > NRG_DIFF) ||
+	   (data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) {
+
+		/* Decrease auto_corr values to increase sensitivity */
+		val = data->auto_corr_cck - AUTO_CORR_STEP_CCK;
+		data->auto_corr_cck =
+			max((u32)ranges->auto_corr_min_cck, val);
+		val = data->auto_corr_cck_mrc - AUTO_CORR_STEP_CCK;
+		data->auto_corr_cck_mrc =
+			max((u32)ranges->auto_corr_min_cck_mrc, val);
+	}
+
+	return 0;
+}
+
+
+static int iwl_sens_auto_corr_ofdm(struct iwl_priv *priv,
+				       u32 norm_fa,
+				       u32 rx_enable_time)
+{
+	u32 val;
+	u32 false_alarms = norm_fa * 200 * 1024;
+	u32 max_false_alarms = MAX_FA_OFDM * rx_enable_time;
+	u32 min_false_alarms = MIN_FA_OFDM * rx_enable_time;
+	struct iwl_sensitivity_data *data = NULL;
+	const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens;
+
+	data = &(priv->sensitivity_data);
+
+	/* If we got too many false alarms this time, reduce sensitivity */
+	if (false_alarms > max_false_alarms) {
+
+		IWL_DEBUG_CALIB(priv, "norm FA %u > max FA %u)\n",
+			     false_alarms, max_false_alarms);
+
+		val = data->auto_corr_ofdm + AUTO_CORR_STEP_OFDM;
+		data->auto_corr_ofdm =
+			min((u32)ranges->auto_corr_max_ofdm, val);
+
+		val = data->auto_corr_ofdm_mrc + AUTO_CORR_STEP_OFDM;
+		data->auto_corr_ofdm_mrc =
+			min((u32)ranges->auto_corr_max_ofdm_mrc, val);
+
+		val = data->auto_corr_ofdm_x1 + AUTO_CORR_STEP_OFDM;
+		data->auto_corr_ofdm_x1 =
+			min((u32)ranges->auto_corr_max_ofdm_x1, val);
+
+		val = data->auto_corr_ofdm_mrc_x1 + AUTO_CORR_STEP_OFDM;
+		data->auto_corr_ofdm_mrc_x1 =
+			min((u32)ranges->auto_corr_max_ofdm_mrc_x1, val);
+	}
+
+	/* Else if we got fewer than desired, increase sensitivity */
+	else if (false_alarms < min_false_alarms) {
+
+		IWL_DEBUG_CALIB(priv, "norm FA %u < min FA %u\n",
+			     false_alarms, min_false_alarms);
+
+		val = data->auto_corr_ofdm - AUTO_CORR_STEP_OFDM;
+		data->auto_corr_ofdm =
+			max((u32)ranges->auto_corr_min_ofdm, val);
+
+		val = data->auto_corr_ofdm_mrc - AUTO_CORR_STEP_OFDM;
+		data->auto_corr_ofdm_mrc =
+			max((u32)ranges->auto_corr_min_ofdm_mrc, val);
+
+		val = data->auto_corr_ofdm_x1 - AUTO_CORR_STEP_OFDM;
+		data->auto_corr_ofdm_x1 =
+			max((u32)ranges->auto_corr_min_ofdm_x1, val);
+
+		val = data->auto_corr_ofdm_mrc_x1 - AUTO_CORR_STEP_OFDM;
+		data->auto_corr_ofdm_mrc_x1 =
+			max((u32)ranges->auto_corr_min_ofdm_mrc_x1, val);
+	} else {
+		IWL_DEBUG_CALIB(priv, "min FA %u < norm FA %u < max FA %u OK\n",
+			 min_false_alarms, false_alarms, max_false_alarms);
+	}
+	return 0;
+}
+
+static void iwl_prepare_legacy_sensitivity_tbl(struct iwl_priv *priv,
+				struct iwl_sensitivity_data *data,
+				__le16 *tbl)
+{
+	tbl[HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX] =
+				cpu_to_le16((u16)data->auto_corr_ofdm);
+	tbl[HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX] =
+				cpu_to_le16((u16)data->auto_corr_ofdm_mrc);
+	tbl[HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX] =
+				cpu_to_le16((u16)data->auto_corr_ofdm_x1);
+	tbl[HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX] =
+				cpu_to_le16((u16)data->auto_corr_ofdm_mrc_x1);
+
+	tbl[HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX] =
+				cpu_to_le16((u16)data->auto_corr_cck);
+	tbl[HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX] =
+				cpu_to_le16((u16)data->auto_corr_cck_mrc);
+
+	tbl[HD_MIN_ENERGY_CCK_DET_INDEX] =
+				cpu_to_le16((u16)data->nrg_th_cck);
+	tbl[HD_MIN_ENERGY_OFDM_DET_INDEX] =
+				cpu_to_le16((u16)data->nrg_th_ofdm);
+
+	tbl[HD_BARKER_CORR_TH_ADD_MIN_INDEX] =
+				cpu_to_le16(data->barker_corr_th_min);
+	tbl[HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX] =
+				cpu_to_le16(data->barker_corr_th_min_mrc);
+	tbl[HD_OFDM_ENERGY_TH_IN_INDEX] =
+				cpu_to_le16(data->nrg_th_cca);
+
+	IWL_DEBUG_CALIB(priv, "ofdm: ac %u mrc %u x1 %u mrc_x1 %u thresh %u\n",
+			data->auto_corr_ofdm, data->auto_corr_ofdm_mrc,
+			data->auto_corr_ofdm_x1, data->auto_corr_ofdm_mrc_x1,
+			data->nrg_th_ofdm);
+
+	IWL_DEBUG_CALIB(priv, "cck: ac %u mrc %u thresh %u\n",
+			data->auto_corr_cck, data->auto_corr_cck_mrc,
+			data->nrg_th_cck);
+}
+
+/* Prepare a SENSITIVITY_CMD, send to uCode if values have changed */
+static int iwl_sensitivity_write(struct iwl_priv *priv)
+{
+	struct iwl_sensitivity_cmd cmd;
+	struct iwl_sensitivity_data *data = NULL;
+	struct iwl_host_cmd cmd_out = {
+		.id = SENSITIVITY_CMD,
+		.len = { sizeof(struct iwl_sensitivity_cmd), },
+		.flags = CMD_ASYNC,
+		.data = { &cmd, },
+	};
+
+	data = &(priv->sensitivity_data);
+
+	memset(&cmd, 0, sizeof(cmd));
+
+	iwl_prepare_legacy_sensitivity_tbl(priv, data, &cmd.table[0]);
+
+	/* Update uCode's "work" table, and copy it to DSP */
+	cmd.control = SENSITIVITY_CMD_CONTROL_WORK_TABLE;
+
+	/* Don't send command to uCode if nothing has changed */
+	if (!memcmp(&cmd.table[0], &(priv->sensitivity_tbl[0]),
+		    sizeof(u16)*HD_TABLE_SIZE)) {
+		IWL_DEBUG_CALIB(priv, "No change in SENSITIVITY_CMD\n");
+		return 0;
+	}
+
+	/* Copy table for comparison next time */
+	memcpy(&(priv->sensitivity_tbl[0]), &(cmd.table[0]),
+	       sizeof(u16)*HD_TABLE_SIZE);
+
+	return iwl_dvm_send_cmd(priv, &cmd_out);
+}
+
+/* Prepare a SENSITIVITY_CMD, send to uCode if values have changed */
+static int iwl_enhance_sensitivity_write(struct iwl_priv *priv)
+{
+	struct iwl_enhance_sensitivity_cmd cmd;
+	struct iwl_sensitivity_data *data = NULL;
+	struct iwl_host_cmd cmd_out = {
+		.id = SENSITIVITY_CMD,
+		.len = { sizeof(struct iwl_enhance_sensitivity_cmd), },
+		.flags = CMD_ASYNC,
+		.data = { &cmd, },
+	};
+
+	data = &(priv->sensitivity_data);
+
+	memset(&cmd, 0, sizeof(cmd));
+
+	iwl_prepare_legacy_sensitivity_tbl(priv, data, &cmd.enhance_table[0]);
+
+	if (priv->cfg->base_params->hd_v2) {
+		cmd.enhance_table[HD_INA_NON_SQUARE_DET_OFDM_INDEX] =
+			HD_INA_NON_SQUARE_DET_OFDM_DATA_V2;
+		cmd.enhance_table[HD_INA_NON_SQUARE_DET_CCK_INDEX] =
+			HD_INA_NON_SQUARE_DET_CCK_DATA_V2;
+		cmd.enhance_table[HD_CORR_11_INSTEAD_OF_CORR_9_EN_INDEX] =
+			HD_CORR_11_INSTEAD_OF_CORR_9_EN_DATA_V2;
+		cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_INDEX] =
+			HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_DATA_V2;
+		cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_INDEX] =
+			HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V2;
+		cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_SLOPE_INDEX] =
+			HD_OFDM_NON_SQUARE_DET_SLOPE_DATA_V2;
+		cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_INTERCEPT_INDEX] =
+			HD_OFDM_NON_SQUARE_DET_INTERCEPT_DATA_V2;
+		cmd.enhance_table[HD_CCK_NON_SQUARE_DET_SLOPE_MRC_INDEX] =
+			HD_CCK_NON_SQUARE_DET_SLOPE_MRC_DATA_V2;
+		cmd.enhance_table[HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_INDEX] =
+			HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V2;
+		cmd.enhance_table[HD_CCK_NON_SQUARE_DET_SLOPE_INDEX] =
+			HD_CCK_NON_SQUARE_DET_SLOPE_DATA_V2;
+		cmd.enhance_table[HD_CCK_NON_SQUARE_DET_INTERCEPT_INDEX] =
+			HD_CCK_NON_SQUARE_DET_INTERCEPT_DATA_V2;
+	} else {
+		cmd.enhance_table[HD_INA_NON_SQUARE_DET_OFDM_INDEX] =
+			HD_INA_NON_SQUARE_DET_OFDM_DATA_V1;
+		cmd.enhance_table[HD_INA_NON_SQUARE_DET_CCK_INDEX] =
+			HD_INA_NON_SQUARE_DET_CCK_DATA_V1;
+		cmd.enhance_table[HD_CORR_11_INSTEAD_OF_CORR_9_EN_INDEX] =
+			HD_CORR_11_INSTEAD_OF_CORR_9_EN_DATA_V1;
+		cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_INDEX] =
+			HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_DATA_V1;
+		cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_INDEX] =
+			HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V1;
+		cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_SLOPE_INDEX] =
+			HD_OFDM_NON_SQUARE_DET_SLOPE_DATA_V1;
+		cmd.enhance_table[HD_OFDM_NON_SQUARE_DET_INTERCEPT_INDEX] =
+			HD_OFDM_NON_SQUARE_DET_INTERCEPT_DATA_V1;
+		cmd.enhance_table[HD_CCK_NON_SQUARE_DET_SLOPE_MRC_INDEX] =
+			HD_CCK_NON_SQUARE_DET_SLOPE_MRC_DATA_V1;
+		cmd.enhance_table[HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_INDEX] =
+			HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V1;
+		cmd.enhance_table[HD_CCK_NON_SQUARE_DET_SLOPE_INDEX] =
+			HD_CCK_NON_SQUARE_DET_SLOPE_DATA_V1;
+		cmd.enhance_table[HD_CCK_NON_SQUARE_DET_INTERCEPT_INDEX] =
+			HD_CCK_NON_SQUARE_DET_INTERCEPT_DATA_V1;
+	}
+
+	/* Update uCode's "work" table, and copy it to DSP */
+	cmd.control = SENSITIVITY_CMD_CONTROL_WORK_TABLE;
+
+	/* Don't send command to uCode if nothing has changed */
+	if (!memcmp(&cmd.enhance_table[0], &(priv->sensitivity_tbl[0]),
+		    sizeof(u16)*HD_TABLE_SIZE) &&
+	    !memcmp(&cmd.enhance_table[HD_INA_NON_SQUARE_DET_OFDM_INDEX],
+		    &(priv->enhance_sensitivity_tbl[0]),
+		    sizeof(u16)*ENHANCE_HD_TABLE_ENTRIES)) {
+		IWL_DEBUG_CALIB(priv, "No change in SENSITIVITY_CMD\n");
+		return 0;
+	}
+
+	/* Copy table for comparison next time */
+	memcpy(&(priv->sensitivity_tbl[0]), &(cmd.enhance_table[0]),
+	       sizeof(u16)*HD_TABLE_SIZE);
+	memcpy(&(priv->enhance_sensitivity_tbl[0]),
+	       &(cmd.enhance_table[HD_INA_NON_SQUARE_DET_OFDM_INDEX]),
+	       sizeof(u16)*ENHANCE_HD_TABLE_ENTRIES);
+
+	return iwl_dvm_send_cmd(priv, &cmd_out);
+}
+
+void iwl_init_sensitivity(struct iwl_priv *priv)
+{
+	int ret = 0;
+	int i;
+	struct iwl_sensitivity_data *data = NULL;
+	const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens;
+
+	if (priv->calib_disabled & IWL_SENSITIVITY_CALIB_DISABLED)
+		return;
+
+	IWL_DEBUG_CALIB(priv, "Start iwl_init_sensitivity\n");
+
+	/* Clear driver's sensitivity algo data */
+	data = &(priv->sensitivity_data);
+
+	if (ranges == NULL)
+		return;
+
+	memset(data, 0, sizeof(struct iwl_sensitivity_data));
+
+	data->num_in_cck_no_fa = 0;
+	data->nrg_curr_state = IWL_FA_TOO_MANY;
+	data->nrg_prev_state = IWL_FA_TOO_MANY;
+	data->nrg_silence_ref = 0;
+	data->nrg_silence_idx = 0;
+	data->nrg_energy_idx = 0;
+
+	for (i = 0; i < 10; i++)
+		data->nrg_value[i] = 0;
+
+	for (i = 0; i < NRG_NUM_PREV_STAT_L; i++)
+		data->nrg_silence_rssi[i] = 0;
+
+	data->auto_corr_ofdm =  ranges->auto_corr_min_ofdm;
+	data->auto_corr_ofdm_mrc = ranges->auto_corr_min_ofdm_mrc;
+	data->auto_corr_ofdm_x1  = ranges->auto_corr_min_ofdm_x1;
+	data->auto_corr_ofdm_mrc_x1 = ranges->auto_corr_min_ofdm_mrc_x1;
+	data->auto_corr_cck = AUTO_CORR_CCK_MIN_VAL_DEF;
+	data->auto_corr_cck_mrc = ranges->auto_corr_min_cck_mrc;
+	data->nrg_th_cck = ranges->nrg_th_cck;
+	data->nrg_th_ofdm = ranges->nrg_th_ofdm;
+	data->barker_corr_th_min = ranges->barker_corr_th_min;
+	data->barker_corr_th_min_mrc = ranges->barker_corr_th_min_mrc;
+	data->nrg_th_cca = ranges->nrg_th_cca;
+
+	data->last_bad_plcp_cnt_ofdm = 0;
+	data->last_fa_cnt_ofdm = 0;
+	data->last_bad_plcp_cnt_cck = 0;
+	data->last_fa_cnt_cck = 0;
+
+	if (priv->fw->enhance_sensitivity_table)
+		ret |= iwl_enhance_sensitivity_write(priv);
+	else
+		ret |= iwl_sensitivity_write(priv);
+	IWL_DEBUG_CALIB(priv, "<<return 0x%X\n", ret);
+}
+
+void iwl_sensitivity_calibration(struct iwl_priv *priv)
+{
+	u32 rx_enable_time;
+	u32 fa_cck;
+	u32 fa_ofdm;
+	u32 bad_plcp_cck;
+	u32 bad_plcp_ofdm;
+	u32 norm_fa_ofdm;
+	u32 norm_fa_cck;
+	struct iwl_sensitivity_data *data = NULL;
+	struct statistics_rx_non_phy *rx_info;
+	struct statistics_rx_phy *ofdm, *cck;
+	struct statistics_general_data statis;
+
+	if (priv->calib_disabled & IWL_SENSITIVITY_CALIB_DISABLED)
+		return;
+
+	data = &(priv->sensitivity_data);
+
+	if (!iwl_is_any_associated(priv)) {
+		IWL_DEBUG_CALIB(priv, "<< - not associated\n");
+		return;
+	}
+
+	spin_lock_bh(&priv->statistics.lock);
+	rx_info = &priv->statistics.rx_non_phy;
+	ofdm = &priv->statistics.rx_ofdm;
+	cck = &priv->statistics.rx_cck;
+	if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) {
+		IWL_DEBUG_CALIB(priv, "<< invalid data.\n");
+		spin_unlock_bh(&priv->statistics.lock);
+		return;
+	}
+
+	/* Extract Statistics: */
+	rx_enable_time = le32_to_cpu(rx_info->channel_load);
+	fa_cck = le32_to_cpu(cck->false_alarm_cnt);
+	fa_ofdm = le32_to_cpu(ofdm->false_alarm_cnt);
+	bad_plcp_cck = le32_to_cpu(cck->plcp_err);
+	bad_plcp_ofdm = le32_to_cpu(ofdm->plcp_err);
+
+	statis.beacon_silence_rssi_a =
+			le32_to_cpu(rx_info->beacon_silence_rssi_a);
+	statis.beacon_silence_rssi_b =
+			le32_to_cpu(rx_info->beacon_silence_rssi_b);
+	statis.beacon_silence_rssi_c =
+			le32_to_cpu(rx_info->beacon_silence_rssi_c);
+	statis.beacon_energy_a =
+			le32_to_cpu(rx_info->beacon_energy_a);
+	statis.beacon_energy_b =
+			le32_to_cpu(rx_info->beacon_energy_b);
+	statis.beacon_energy_c =
+			le32_to_cpu(rx_info->beacon_energy_c);
+
+	spin_unlock_bh(&priv->statistics.lock);
+
+	IWL_DEBUG_CALIB(priv, "rx_enable_time = %u usecs\n", rx_enable_time);
+
+	if (!rx_enable_time) {
+		IWL_DEBUG_CALIB(priv, "<< RX Enable Time == 0!\n");
+		return;
+	}
+
+	/* These statistics increase monotonically, and do not reset
+	 *   at each beacon.  Calculate difference from last value, or just
+	 *   use the new statistics value if it has reset or wrapped around. */
+	if (data->last_bad_plcp_cnt_cck > bad_plcp_cck)
+		data->last_bad_plcp_cnt_cck = bad_plcp_cck;
+	else {
+		bad_plcp_cck -= data->last_bad_plcp_cnt_cck;
+		data->last_bad_plcp_cnt_cck += bad_plcp_cck;
+	}
+
+	if (data->last_bad_plcp_cnt_ofdm > bad_plcp_ofdm)
+		data->last_bad_plcp_cnt_ofdm = bad_plcp_ofdm;
+	else {
+		bad_plcp_ofdm -= data->last_bad_plcp_cnt_ofdm;
+		data->last_bad_plcp_cnt_ofdm += bad_plcp_ofdm;
+	}
+
+	if (data->last_fa_cnt_ofdm > fa_ofdm)
+		data->last_fa_cnt_ofdm = fa_ofdm;
+	else {
+		fa_ofdm -= data->last_fa_cnt_ofdm;
+		data->last_fa_cnt_ofdm += fa_ofdm;
+	}
+
+	if (data->last_fa_cnt_cck > fa_cck)
+		data->last_fa_cnt_cck = fa_cck;
+	else {
+		fa_cck -= data->last_fa_cnt_cck;
+		data->last_fa_cnt_cck += fa_cck;
+	}
+
+	/* Total aborted signal locks */
+	norm_fa_ofdm = fa_ofdm + bad_plcp_ofdm;
+	norm_fa_cck = fa_cck + bad_plcp_cck;
+
+	IWL_DEBUG_CALIB(priv, "cck: fa %u badp %u  ofdm: fa %u badp %u\n", fa_cck,
+			bad_plcp_cck, fa_ofdm, bad_plcp_ofdm);
+
+	iwl_sens_auto_corr_ofdm(priv, norm_fa_ofdm, rx_enable_time);
+	iwl_sens_energy_cck(priv, norm_fa_cck, rx_enable_time, &statis);
+	if (priv->fw->enhance_sensitivity_table)
+		iwl_enhance_sensitivity_write(priv);
+	else
+		iwl_sensitivity_write(priv);
+}
+
+static inline u8 find_first_chain(u8 mask)
+{
+	if (mask & ANT_A)
+		return CHAIN_A;
+	if (mask & ANT_B)
+		return CHAIN_B;
+	return CHAIN_C;
+}
+
+/**
+ * Run disconnected antenna algorithm to find out which antennas are
+ * disconnected.
+ */
+static void iwl_find_disconn_antenna(struct iwl_priv *priv, u32* average_sig,
+				     struct iwl_chain_noise_data *data)
+{
+	u32 active_chains = 0;
+	u32 max_average_sig;
+	u16 max_average_sig_antenna_i;
+	u8 num_tx_chains;
+	u8 first_chain;
+	u16 i = 0;
+
+	average_sig[0] = data->chain_signal_a / IWL_CAL_NUM_BEACONS;
+	average_sig[1] = data->chain_signal_b / IWL_CAL_NUM_BEACONS;
+	average_sig[2] = data->chain_signal_c / IWL_CAL_NUM_BEACONS;
+
+	if (average_sig[0] >= average_sig[1]) {
+		max_average_sig = average_sig[0];
+		max_average_sig_antenna_i = 0;
+		active_chains = (1 << max_average_sig_antenna_i);
+	} else {
+		max_average_sig = average_sig[1];
+		max_average_sig_antenna_i = 1;
+		active_chains = (1 << max_average_sig_antenna_i);
+	}
+
+	if (average_sig[2] >= max_average_sig) {
+		max_average_sig = average_sig[2];
+		max_average_sig_antenna_i = 2;
+		active_chains = (1 << max_average_sig_antenna_i);
+	}
+
+	IWL_DEBUG_CALIB(priv, "average_sig: a %d b %d c %d\n",
+		     average_sig[0], average_sig[1], average_sig[2]);
+	IWL_DEBUG_CALIB(priv, "max_average_sig = %d, antenna %d\n",
+		     max_average_sig, max_average_sig_antenna_i);
+
+	/* Compare signal strengths for all 3 receivers. */
+	for (i = 0; i < NUM_RX_CHAINS; i++) {
+		if (i != max_average_sig_antenna_i) {
+			s32 rssi_delta = (max_average_sig - average_sig[i]);
+
+			/* If signal is very weak, compared with
+			 * strongest, mark it as disconnected. */
+			if (rssi_delta > MAXIMUM_ALLOWED_PATHLOSS)
+				data->disconn_array[i] = 1;
+			else
+				active_chains |= (1 << i);
+			IWL_DEBUG_CALIB(priv, "i = %d  rssiDelta = %d  "
+			     "disconn_array[i] = %d\n",
+			     i, rssi_delta, data->disconn_array[i]);
+		}
+	}
+
+	/*
+	 * The above algorithm sometimes fails when the ucode
+	 * reports 0 for all chains. It's not clear why that
+	 * happens to start with, but it is then causing trouble
+	 * because this can make us enable more chains than the
+	 * hardware really has.
+	 *
+	 * To be safe, simply mask out any chains that we know
+	 * are not on the device.
+	 */
+	active_chains &= priv->eeprom_data->valid_rx_ant;
+
+	num_tx_chains = 0;
+	for (i = 0; i < NUM_RX_CHAINS; i++) {
+		/* loops on all the bits of
+		 * priv->hw_setting.valid_tx_ant */
+		u8 ant_msk = (1 << i);
+		if (!(priv->eeprom_data->valid_tx_ant & ant_msk))
+			continue;
+
+		num_tx_chains++;
+		if (data->disconn_array[i] == 0)
+			/* there is a Tx antenna connected */
+			break;
+		if (num_tx_chains == priv->hw_params.tx_chains_num &&
+		    data->disconn_array[i]) {
+			/*
+			 * If all chains are disconnected
+			 * connect the first valid tx chain
+			 */
+			first_chain =
+				find_first_chain(priv->eeprom_data->valid_tx_ant);
+			data->disconn_array[first_chain] = 0;
+			active_chains |= BIT(first_chain);
+			IWL_DEBUG_CALIB(priv,
+					"All Tx chains are disconnected W/A - declare %d as connected\n",
+					first_chain);
+			break;
+		}
+	}
+
+	if (active_chains != priv->eeprom_data->valid_rx_ant &&
+	    active_chains != priv->chain_noise_data.active_chains)
+		IWL_DEBUG_CALIB(priv,
+				"Detected that not all antennas are connected! "
+				"Connected: %#x, valid: %#x.\n",
+				active_chains,
+				priv->eeprom_data->valid_rx_ant);
+
+	/* Save for use within RXON, TX, SCAN commands, etc. */
+	data->active_chains = active_chains;
+	IWL_DEBUG_CALIB(priv, "active_chains (bitwise) = 0x%x\n",
+			active_chains);
+}
+
+static void iwlagn_gain_computation(struct iwl_priv *priv,
+				    u32 average_noise[NUM_RX_CHAINS],
+				    u8 default_chain)
+{
+	int i;
+	s32 delta_g;
+	struct iwl_chain_noise_data *data = &priv->chain_noise_data;
+
+	/*
+	 * Find Gain Code for the chains based on "default chain"
+	 */
+	for (i = default_chain + 1; i < NUM_RX_CHAINS; i++) {
+		if ((data->disconn_array[i])) {
+			data->delta_gain_code[i] = 0;
+			continue;
+		}
+
+		delta_g = (priv->cfg->base_params->chain_noise_scale *
+			((s32)average_noise[default_chain] -
+			(s32)average_noise[i])) / 1500;
+
+		/* bound gain by 2 bits value max, 3rd bit is sign */
+		data->delta_gain_code[i] =
+			min(abs(delta_g),
+			(long) CHAIN_NOISE_MAX_DELTA_GAIN_CODE);
+
+		if (delta_g < 0)
+			/*
+			 * set negative sign ...
+			 * note to Intel developers:  This is uCode API format,
+			 *   not the format of any internal device registers.
+			 *   Do not change this format for e.g. 6050 or similar
+			 *   devices.  Change format only if more resolution
+			 *   (i.e. more than 2 bits magnitude) is needed.
+			 */
+			data->delta_gain_code[i] |= (1 << 2);
+	}
+
+	IWL_DEBUG_CALIB(priv, "Delta gains: ANT_B = %d  ANT_C = %d\n",
+			data->delta_gain_code[1], data->delta_gain_code[2]);
+
+	if (!data->radio_write) {
+		struct iwl_calib_chain_noise_gain_cmd cmd;
+
+		memset(&cmd, 0, sizeof(cmd));
+
+		iwl_set_calib_hdr(&cmd.hdr,
+			priv->phy_calib_chain_noise_gain_cmd);
+		cmd.delta_gain_1 = data->delta_gain_code[1];
+		cmd.delta_gain_2 = data->delta_gain_code[2];
+		iwl_dvm_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
+			CMD_ASYNC, sizeof(cmd), &cmd);
+
+		data->radio_write = 1;
+		data->state = IWL_CHAIN_NOISE_CALIBRATED;
+	}
+}
+
+/*
+ * Accumulate 16 beacons of signal and noise statistics for each of
+ *   3 receivers/antennas/rx-chains, then figure out:
+ * 1)  Which antennas are connected.
+ * 2)  Differential rx gain settings to balance the 3 receivers.
+ */
+void iwl_chain_noise_calibration(struct iwl_priv *priv)
+{
+	struct iwl_chain_noise_data *data = NULL;
+
+	u32 chain_noise_a;
+	u32 chain_noise_b;
+	u32 chain_noise_c;
+	u32 chain_sig_a;
+	u32 chain_sig_b;
+	u32 chain_sig_c;
+	u32 average_sig[NUM_RX_CHAINS] = {INITIALIZATION_VALUE};
+	u32 average_noise[NUM_RX_CHAINS] = {INITIALIZATION_VALUE};
+	u32 min_average_noise = MIN_AVERAGE_NOISE_MAX_VALUE;
+	u16 min_average_noise_antenna_i = INITIALIZATION_VALUE;
+	u16 i = 0;
+	u16 rxon_chnum = INITIALIZATION_VALUE;
+	u16 stat_chnum = INITIALIZATION_VALUE;
+	u8 rxon_band24;
+	u8 stat_band24;
+	struct statistics_rx_non_phy *rx_info;
+
+	/*
+	 * MULTI-FIXME:
+	 * When we support multiple interfaces on different channels,
+	 * this must be modified/fixed.
+	 */
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+
+	if (priv->calib_disabled & IWL_CHAIN_NOISE_CALIB_DISABLED)
+		return;
+
+	data = &(priv->chain_noise_data);
+
+	/*
+	 * Accumulate just the first "chain_noise_num_beacons" after
+	 * the first association, then we're done forever.
+	 */
+	if (data->state != IWL_CHAIN_NOISE_ACCUMULATE) {
+		if (data->state == IWL_CHAIN_NOISE_ALIVE)
+			IWL_DEBUG_CALIB(priv, "Wait for noise calib reset\n");
+		return;
+	}
+
+	spin_lock_bh(&priv->statistics.lock);
+
+	rx_info = &priv->statistics.rx_non_phy;
+
+	if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) {
+		IWL_DEBUG_CALIB(priv, " << Interference data unavailable\n");
+		spin_unlock_bh(&priv->statistics.lock);
+		return;
+	}
+
+	rxon_band24 = !!(ctx->staging.flags & RXON_FLG_BAND_24G_MSK);
+	rxon_chnum = le16_to_cpu(ctx->staging.channel);
+	stat_band24 =
+		!!(priv->statistics.flag & STATISTICS_REPLY_FLG_BAND_24G_MSK);
+	stat_chnum = le32_to_cpu(priv->statistics.flag) >> 16;
+
+	/* Make sure we accumulate data for just the associated channel
+	 *   (even if scanning). */
+	if ((rxon_chnum != stat_chnum) || (rxon_band24 != stat_band24)) {
+		IWL_DEBUG_CALIB(priv, "Stats not from chan=%d, band24=%d\n",
+				rxon_chnum, rxon_band24);
+		spin_unlock_bh(&priv->statistics.lock);
+		return;
+	}
+
+	/*
+	 *  Accumulate beacon statistics values across
+	 * "chain_noise_num_beacons"
+	 */
+	chain_noise_a = le32_to_cpu(rx_info->beacon_silence_rssi_a) &
+				IN_BAND_FILTER;
+	chain_noise_b = le32_to_cpu(rx_info->beacon_silence_rssi_b) &
+				IN_BAND_FILTER;
+	chain_noise_c = le32_to_cpu(rx_info->beacon_silence_rssi_c) &
+				IN_BAND_FILTER;
+
+	chain_sig_a = le32_to_cpu(rx_info->beacon_rssi_a) & IN_BAND_FILTER;
+	chain_sig_b = le32_to_cpu(rx_info->beacon_rssi_b) & IN_BAND_FILTER;
+	chain_sig_c = le32_to_cpu(rx_info->beacon_rssi_c) & IN_BAND_FILTER;
+
+	spin_unlock_bh(&priv->statistics.lock);
+
+	data->beacon_count++;
+
+	data->chain_noise_a = (chain_noise_a + data->chain_noise_a);
+	data->chain_noise_b = (chain_noise_b + data->chain_noise_b);
+	data->chain_noise_c = (chain_noise_c + data->chain_noise_c);
+
+	data->chain_signal_a = (chain_sig_a + data->chain_signal_a);
+	data->chain_signal_b = (chain_sig_b + data->chain_signal_b);
+	data->chain_signal_c = (chain_sig_c + data->chain_signal_c);
+
+	IWL_DEBUG_CALIB(priv, "chan=%d, band24=%d, beacon=%d\n",
+			rxon_chnum, rxon_band24, data->beacon_count);
+	IWL_DEBUG_CALIB(priv, "chain_sig: a %d b %d c %d\n",
+			chain_sig_a, chain_sig_b, chain_sig_c);
+	IWL_DEBUG_CALIB(priv, "chain_noise: a %d b %d c %d\n",
+			chain_noise_a, chain_noise_b, chain_noise_c);
+
+	/* If this is the "chain_noise_num_beacons", determine:
+	 * 1)  Disconnected antennas (using signal strengths)
+	 * 2)  Differential gain (using silence noise) to balance receivers */
+	if (data->beacon_count != IWL_CAL_NUM_BEACONS)
+		return;
+
+	/* Analyze signal for disconnected antenna */
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist) {
+		/* Disable disconnected antenna algorithm for advanced
+		   bt coex, assuming valid antennas are connected */
+		data->active_chains = priv->eeprom_data->valid_rx_ant;
+		for (i = 0; i < NUM_RX_CHAINS; i++)
+			if (!(data->active_chains & (1<<i)))
+				data->disconn_array[i] = 1;
+	} else
+		iwl_find_disconn_antenna(priv, average_sig, data);
+
+	/* Analyze noise for rx balance */
+	average_noise[0] = data->chain_noise_a / IWL_CAL_NUM_BEACONS;
+	average_noise[1] = data->chain_noise_b / IWL_CAL_NUM_BEACONS;
+	average_noise[2] = data->chain_noise_c / IWL_CAL_NUM_BEACONS;
+
+	for (i = 0; i < NUM_RX_CHAINS; i++) {
+		if (!(data->disconn_array[i]) &&
+		   (average_noise[i] <= min_average_noise)) {
+			/* This means that chain i is active and has
+			 * lower noise values so far: */
+			min_average_noise = average_noise[i];
+			min_average_noise_antenna_i = i;
+		}
+	}
+
+	IWL_DEBUG_CALIB(priv, "average_noise: a %d b %d c %d\n",
+			average_noise[0], average_noise[1],
+			average_noise[2]);
+
+	IWL_DEBUG_CALIB(priv, "min_average_noise = %d, antenna %d\n",
+			min_average_noise, min_average_noise_antenna_i);
+
+	iwlagn_gain_computation(
+		priv, average_noise,
+		find_first_chain(priv->eeprom_data->valid_rx_ant));
+
+	/* Some power changes may have been made during the calibration.
+	 * Update and commit the RXON
+	 */
+	iwl_update_chain_flags(priv);
+
+	data->state = IWL_CHAIN_NOISE_DONE;
+	iwl_power_update_mode(priv, false);
+}
+
+void iwl_reset_run_time_calib(struct iwl_priv *priv)
+{
+	int i;
+	memset(&(priv->sensitivity_data), 0,
+	       sizeof(struct iwl_sensitivity_data));
+	memset(&(priv->chain_noise_data), 0,
+	       sizeof(struct iwl_chain_noise_data));
+	for (i = 0; i < NUM_RX_CHAINS; i++)
+		priv->chain_noise_data.delta_gain_code[i] =
+				CHAIN_NOISE_DELTA_GAIN_INIT_VAL;
+
+	/* Ask for statistics now, the uCode will send notification
+	 * periodically after association */
+	iwl_send_statistics_request(priv, CMD_ASYNC, true);
+}
diff --git a/drivers/net/wireless/iwlwifi/dvm/calib.h b/drivers/net/wireless/iwlwifi/dvm/calib.h
new file mode 100644
index 00000000000..2349f393cc4
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/calib.h
@@ -0,0 +1,74 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *****************************************************************************/
+#ifndef __iwl_calib_h__
+#define __iwl_calib_h__
+
+#include "dev.h"
+#include "commands.h"
+
+void iwl_chain_noise_calibration(struct iwl_priv *priv);
+void iwl_sensitivity_calibration(struct iwl_priv *priv);
+
+void iwl_init_sensitivity(struct iwl_priv *priv);
+void iwl_reset_run_time_calib(struct iwl_priv *priv);
+
+#endif /* __iwl_calib_h__ */
diff --git a/drivers/net/wireless/iwlwifi/dvm/commands.h b/drivers/net/wireless/iwlwifi/dvm/commands.h
new file mode 100644
index 00000000000..64811cd9163
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/commands.h
@@ -0,0 +1,3958 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+/*
+ * Please use this file (commands.h) only for uCode API definitions.
+ * Please use iwl-xxxx-hw.h for hardware-related definitions.
+ * Please use dev.h for driver implementation definitions.
+ */
+
+#ifndef __iwl_commands_h__
+#define __iwl_commands_h__
+
+#include <linux/ieee80211.h>
+#include <linux/types.h>
+
+
+enum {
+	REPLY_ALIVE = 0x1,
+	REPLY_ERROR = 0x2,
+	REPLY_ECHO = 0x3,		/* test command */
+
+	/* RXON and QOS commands */
+	REPLY_RXON = 0x10,
+	REPLY_RXON_ASSOC = 0x11,
+	REPLY_QOS_PARAM = 0x13,
+	REPLY_RXON_TIMING = 0x14,
+
+	/* Multi-Station support */
+	REPLY_ADD_STA = 0x18,
+	REPLY_REMOVE_STA = 0x19,
+	REPLY_REMOVE_ALL_STA = 0x1a,	/* not used */
+	REPLY_TXFIFO_FLUSH = 0x1e,
+
+	/* Security */
+	REPLY_WEPKEY = 0x20,
+
+	/* RX, TX, LEDs */
+	REPLY_TX = 0x1c,
+	REPLY_LEDS_CMD = 0x48,
+	REPLY_TX_LINK_QUALITY_CMD = 0x4e,
+
+	/* WiMAX coexistence */
+	COEX_PRIORITY_TABLE_CMD = 0x5a,
+	COEX_MEDIUM_NOTIFICATION = 0x5b,
+	COEX_EVENT_CMD = 0x5c,
+
+	/* Calibration */
+	TEMPERATURE_NOTIFICATION = 0x62,
+	CALIBRATION_CFG_CMD = 0x65,
+	CALIBRATION_RES_NOTIFICATION = 0x66,
+	CALIBRATION_COMPLETE_NOTIFICATION = 0x67,
+
+	/* 802.11h related */
+	REPLY_QUIET_CMD = 0x71,		/* not used */
+	REPLY_CHANNEL_SWITCH = 0x72,
+	CHANNEL_SWITCH_NOTIFICATION = 0x73,
+	REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74,
+	SPECTRUM_MEASURE_NOTIFICATION = 0x75,
+
+	/* Power Management */
+	POWER_TABLE_CMD = 0x77,
+	PM_SLEEP_NOTIFICATION = 0x7A,
+	PM_DEBUG_STATISTIC_NOTIFIC = 0x7B,
+
+	/* Scan commands and notifications */
+	REPLY_SCAN_CMD = 0x80,
+	REPLY_SCAN_ABORT_CMD = 0x81,
+	SCAN_START_NOTIFICATION = 0x82,
+	SCAN_RESULTS_NOTIFICATION = 0x83,
+	SCAN_COMPLETE_NOTIFICATION = 0x84,
+
+	/* IBSS/AP commands */
+	BEACON_NOTIFICATION = 0x90,
+	REPLY_TX_BEACON = 0x91,
+	WHO_IS_AWAKE_NOTIFICATION = 0x94,	/* not used */
+
+	/* Miscellaneous commands */
+	REPLY_TX_POWER_DBM_CMD = 0x95,
+	QUIET_NOTIFICATION = 0x96,		/* not used */
+	REPLY_TX_PWR_TABLE_CMD = 0x97,
+	REPLY_TX_POWER_DBM_CMD_V1 = 0x98,	/* old version of API */
+	TX_ANT_CONFIGURATION_CMD = 0x98,
+	MEASURE_ABORT_NOTIFICATION = 0x99,	/* not used */
+
+	/* Bluetooth device coexistence config command */
+	REPLY_BT_CONFIG = 0x9b,
+
+	/* Statistics */
+	REPLY_STATISTICS_CMD = 0x9c,
+	STATISTICS_NOTIFICATION = 0x9d,
+
+	/* RF-KILL commands and notifications */
+	REPLY_CARD_STATE_CMD = 0xa0,
+	CARD_STATE_NOTIFICATION = 0xa1,
+
+	/* Missed beacons notification */
+	MISSED_BEACONS_NOTIFICATION = 0xa2,
+
+	REPLY_CT_KILL_CONFIG_CMD = 0xa4,
+	SENSITIVITY_CMD = 0xa8,
+	REPLY_PHY_CALIBRATION_CMD = 0xb0,
+	REPLY_RX_PHY_CMD = 0xc0,
+	REPLY_RX_MPDU_CMD = 0xc1,
+	REPLY_RX = 0xc3,
+	REPLY_COMPRESSED_BA = 0xc5,
+
+	/* BT Coex */
+	REPLY_BT_COEX_PRIO_TABLE = 0xcc,
+	REPLY_BT_COEX_PROT_ENV = 0xcd,
+	REPLY_BT_COEX_PROFILE_NOTIF = 0xce,
+
+	/* PAN commands */
+	REPLY_WIPAN_PARAMS = 0xb2,
+	REPLY_WIPAN_RXON = 0xb3,	/* use REPLY_RXON structure */
+	REPLY_WIPAN_RXON_TIMING = 0xb4,	/* use REPLY_RXON_TIMING structure */
+	REPLY_WIPAN_RXON_ASSOC = 0xb6,	/* use REPLY_RXON_ASSOC structure */
+	REPLY_WIPAN_QOS_PARAM = 0xb7,	/* use REPLY_QOS_PARAM structure */
+	REPLY_WIPAN_WEPKEY = 0xb8,	/* use REPLY_WEPKEY structure */
+	REPLY_WIPAN_P2P_CHANNEL_SWITCH = 0xb9,
+	REPLY_WIPAN_NOA_NOTIFICATION = 0xbc,
+	REPLY_WIPAN_DEACTIVATION_COMPLETE = 0xbd,
+
+	REPLY_WOWLAN_PATTERNS = 0xe0,
+	REPLY_WOWLAN_WAKEUP_FILTER = 0xe1,
+	REPLY_WOWLAN_TSC_RSC_PARAMS = 0xe2,
+	REPLY_WOWLAN_TKIP_PARAMS = 0xe3,
+	REPLY_WOWLAN_KEK_KCK_MATERIAL = 0xe4,
+	REPLY_WOWLAN_GET_STATUS = 0xe5,
+	REPLY_D3_CONFIG = 0xd3,
+
+	REPLY_MAX = 0xff
+};
+
+/******************************************************************************
+ * (0)
+ * Commonly used structures and definitions:
+ * Command header, rate_n_flags, txpower
+ *
+ *****************************************************************************/
+
+/**
+ * iwlagn rate_n_flags bit fields
+ *
+ * rate_n_flags format is used in following iwlagn commands:
+ *  REPLY_RX (response only)
+ *  REPLY_RX_MPDU (response only)
+ *  REPLY_TX (both command and response)
+ *  REPLY_TX_LINK_QUALITY_CMD
+ *
+ * High-throughput (HT) rate format for bits 7:0 (bit 8 must be "1"):
+ *  2-0:  0)   6 Mbps
+ *        1)  12 Mbps
+ *        2)  18 Mbps
+ *        3)  24 Mbps
+ *        4)  36 Mbps
+ *        5)  48 Mbps
+ *        6)  54 Mbps
+ *        7)  60 Mbps
+ *
+ *  4-3:  0)  Single stream (SISO)
+ *        1)  Dual stream (MIMO)
+ *        2)  Triple stream (MIMO)
+ *
+ *    5:  Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data
+ *
+ * Legacy OFDM rate format for bits 7:0 (bit 8 must be "0", bit 9 "0"):
+ *  3-0:  0xD)   6 Mbps
+ *        0xF)   9 Mbps
+ *        0x5)  12 Mbps
+ *        0x7)  18 Mbps
+ *        0x9)  24 Mbps
+ *        0xB)  36 Mbps
+ *        0x1)  48 Mbps
+ *        0x3)  54 Mbps
+ *
+ * Legacy CCK rate format for bits 7:0 (bit 8 must be "0", bit 9 "1"):
+ *  6-0:   10)  1 Mbps
+ *         20)  2 Mbps
+ *         55)  5.5 Mbps
+ *        110)  11 Mbps
+ */
+#define RATE_MCS_CODE_MSK 0x7
+#define RATE_MCS_SPATIAL_POS 3
+#define RATE_MCS_SPATIAL_MSK 0x18
+#define RATE_MCS_HT_DUP_POS 5
+#define RATE_MCS_HT_DUP_MSK 0x20
+/* Both legacy and HT use bits 7:0 as the CCK/OFDM rate or HT MCS */
+#define RATE_MCS_RATE_MSK 0xff
+
+/* Bit 8: (1) HT format, (0) legacy format in bits 7:0 */
+#define RATE_MCS_FLAGS_POS 8
+#define RATE_MCS_HT_POS 8
+#define RATE_MCS_HT_MSK 0x100
+
+/* Bit 9: (1) CCK, (0) OFDM.  HT (bit 8) must be "0" for this bit to be valid */
+#define RATE_MCS_CCK_POS 9
+#define RATE_MCS_CCK_MSK 0x200
+
+/* Bit 10: (1) Use Green Field preamble */
+#define RATE_MCS_GF_POS 10
+#define RATE_MCS_GF_MSK 0x400
+
+/* Bit 11: (1) Use 40Mhz HT40 chnl width, (0) use 20 MHz legacy chnl width */
+#define RATE_MCS_HT40_POS 11
+#define RATE_MCS_HT40_MSK 0x800
+
+/* Bit 12: (1) Duplicate data on both 20MHz chnls. HT40 (bit 11) must be set. */
+#define RATE_MCS_DUP_POS 12
+#define RATE_MCS_DUP_MSK 0x1000
+
+/* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */
+#define RATE_MCS_SGI_POS 13
+#define RATE_MCS_SGI_MSK 0x2000
+
+/**
+ * rate_n_flags Tx antenna masks
+ * 4965 has 2 transmitters
+ * 5100 has 1 transmitter B
+ * 5150 has 1 transmitter A
+ * 5300 has 3 transmitters
+ * 5350 has 3 transmitters
+ * bit14:16
+ */
+#define RATE_MCS_ANT_POS	14
+#define RATE_MCS_ANT_A_MSK	0x04000
+#define RATE_MCS_ANT_B_MSK	0x08000
+#define RATE_MCS_ANT_C_MSK	0x10000
+#define RATE_MCS_ANT_AB_MSK	(RATE_MCS_ANT_A_MSK | RATE_MCS_ANT_B_MSK)
+#define RATE_MCS_ANT_ABC_MSK	(RATE_MCS_ANT_AB_MSK | RATE_MCS_ANT_C_MSK)
+#define RATE_ANT_NUM 3
+
+#define POWER_TABLE_NUM_ENTRIES			33
+#define POWER_TABLE_NUM_HT_OFDM_ENTRIES		32
+#define POWER_TABLE_CCK_ENTRY			32
+
+#define IWL_PWR_NUM_HT_OFDM_ENTRIES		24
+#define IWL_PWR_CCK_ENTRIES			2
+
+/**
+ * struct tx_power_dual_stream
+ *
+ * Table entries in REPLY_TX_PWR_TABLE_CMD, REPLY_CHANNEL_SWITCH
+ *
+ * Same format as iwl_tx_power_dual_stream, but __le32
+ */
+struct tx_power_dual_stream {
+	__le32 dw;
+} __packed;
+
+/**
+ * Command REPLY_TX_POWER_DBM_CMD = 0x98
+ * struct iwlagn_tx_power_dbm_cmd
+ */
+#define IWLAGN_TX_POWER_AUTO 0x7f
+#define IWLAGN_TX_POWER_NO_CLOSED (0x1 << 6)
+
+struct iwlagn_tx_power_dbm_cmd {
+	s8 global_lmt; /*in half-dBm (e.g. 30 = 15 dBm) */
+	u8 flags;
+	s8 srv_chan_lmt; /*in half-dBm (e.g. 30 = 15 dBm) */
+	u8 reserved;
+} __packed;
+
+/**
+ * Command TX_ANT_CONFIGURATION_CMD = 0x98
+ * This command is used to configure valid Tx antenna.
+ * By default uCode concludes the valid antenna according to the radio flavor.
+ * This command enables the driver to override/modify this conclusion.
+ */
+struct iwl_tx_ant_config_cmd {
+	__le32 valid;
+} __packed;
+
+/******************************************************************************
+ * (0a)
+ * Alive and Error Commands & Responses:
+ *
+ *****************************************************************************/
+
+#define UCODE_VALID_OK	cpu_to_le32(0x1)
+
+/**
+ * REPLY_ALIVE = 0x1 (response only, not a command)
+ *
+ * uCode issues this "alive" notification once the runtime image is ready
+ * to receive commands from the driver.  This is the *second* "alive"
+ * notification that the driver will receive after rebooting uCode;
+ * this "alive" is indicated by subtype field != 9.
+ *
+ * See comments documenting "BSM" (bootstrap state machine).
+ *
+ * This response includes two pointers to structures within the device's
+ * data SRAM (access via HBUS_TARG_MEM_* regs) that are useful for debugging:
+ *
+ * 1)  log_event_table_ptr indicates base of the event log.  This traces
+ *     a 256-entry history of uCode execution within a circular buffer.
+ *     Its header format is:
+ *
+ *	__le32 log_size;     log capacity (in number of entries)
+ *	__le32 type;         (1) timestamp with each entry, (0) no timestamp
+ *	__le32 wraps;        # times uCode has wrapped to top of circular buffer
+ *      __le32 write_index;  next circular buffer entry that uCode would fill
+ *
+ *     The header is followed by the circular buffer of log entries.  Entries
+ *     with timestamps have the following format:
+ *
+ *	__le32 event_id;     range 0 - 1500
+ *	__le32 timestamp;    low 32 bits of TSF (of network, if associated)
+ *	__le32 data;         event_id-specific data value
+ *
+ *     Entries without timestamps contain only event_id and data.
+ *
+ *
+ * 2)  error_event_table_ptr indicates base of the error log.  This contains
+ *     information about any uCode error that occurs.  For agn, the format
+ *     of the error log is defined by struct iwl_error_event_table.
+ *
+ * The Linux driver can print both logs to the system log when a uCode error
+ * occurs.
+ */
+
+/*
+ * Note: This structure is read from the device with IO accesses,
+ * and the reading already does the endian conversion. As it is
+ * read with u32-sized accesses, any members with a different size
+ * need to be ordered correctly though!
+ */
+struct iwl_error_event_table {
+	u32 valid;		/* (nonzero) valid, (0) log is empty */
+	u32 error_id;		/* type of error */
+	u32 pc;			/* program counter */
+	u32 blink1;		/* branch link */
+	u32 blink2;		/* branch link */
+	u32 ilink1;		/* interrupt link */
+	u32 ilink2;		/* interrupt link */
+	u32 data1;		/* error-specific data */
+	u32 data2;		/* error-specific data */
+	u32 line;		/* source code line of error */
+	u32 bcon_time;		/* beacon timer */
+	u32 tsf_low;		/* network timestamp function timer */
+	u32 tsf_hi;		/* network timestamp function timer */
+	u32 gp1;		/* GP1 timer register */
+	u32 gp2;		/* GP2 timer register */
+	u32 gp3;		/* GP3 timer register */
+	u32 ucode_ver;		/* uCode version */
+	u32 hw_ver;		/* HW Silicon version */
+	u32 brd_ver;		/* HW board version */
+	u32 log_pc;		/* log program counter */
+	u32 frame_ptr;		/* frame pointer */
+	u32 stack_ptr;		/* stack pointer */
+	u32 hcmd;		/* last host command header */
+	u32 isr0;		/* isr status register LMPM_NIC_ISR0:
+				 * rxtx_flag */
+	u32 isr1;		/* isr status register LMPM_NIC_ISR1:
+				 * host_flag */
+	u32 isr2;		/* isr status register LMPM_NIC_ISR2:
+				 * enc_flag */
+	u32 isr3;		/* isr status register LMPM_NIC_ISR3:
+				 * time_flag */
+	u32 isr4;		/* isr status register LMPM_NIC_ISR4:
+				 * wico interrupt */
+	u32 isr_pref;		/* isr status register LMPM_NIC_PREF_STAT */
+	u32 wait_event;		/* wait event() caller address */
+	u32 l2p_control;	/* L2pControlField */
+	u32 l2p_duration;	/* L2pDurationField */
+	u32 l2p_mhvalid;	/* L2pMhValidBits */
+	u32 l2p_addr_match;	/* L2pAddrMatchStat */
+	u32 lmpm_pmg_sel;	/* indicate which clocks are turned on
+				 * (LMPM_PMG_SEL) */
+	u32 u_timestamp;	/* indicate when the date and time of the
+				 * compilation */
+	u32 flow_handler;	/* FH read/write pointers, RX credit */
+} __packed;
+
+struct iwl_alive_resp {
+	u8 ucode_minor;
+	u8 ucode_major;
+	__le16 reserved1;
+	u8 sw_rev[8];
+	u8 ver_type;
+	u8 ver_subtype;			/* not "9" for runtime alive */
+	__le16 reserved2;
+	__le32 log_event_table_ptr;	/* SRAM address for event log */
+	__le32 error_event_table_ptr;	/* SRAM address for error log */
+	__le32 timestamp;
+	__le32 is_valid;
+} __packed;
+
+/*
+ * REPLY_ERROR = 0x2 (response only, not a command)
+ */
+struct iwl_error_resp {
+	__le32 error_type;
+	u8 cmd_id;
+	u8 reserved1;
+	__le16 bad_cmd_seq_num;
+	__le32 error_info;
+	__le64 timestamp;
+} __packed;
+
+/******************************************************************************
+ * (1)
+ * RXON Commands & Responses:
+ *
+ *****************************************************************************/
+
+/*
+ * Rx config defines & structure
+ */
+/* rx_config device types  */
+enum {
+	RXON_DEV_TYPE_AP = 1,
+	RXON_DEV_TYPE_ESS = 3,
+	RXON_DEV_TYPE_IBSS = 4,
+	RXON_DEV_TYPE_SNIFFER = 6,
+	RXON_DEV_TYPE_CP = 7,
+	RXON_DEV_TYPE_2STA = 8,
+	RXON_DEV_TYPE_P2P = 9,
+};
+
+
+#define RXON_RX_CHAIN_DRIVER_FORCE_MSK		cpu_to_le16(0x1 << 0)
+#define RXON_RX_CHAIN_DRIVER_FORCE_POS		(0)
+#define RXON_RX_CHAIN_VALID_MSK			cpu_to_le16(0x7 << 1)
+#define RXON_RX_CHAIN_VALID_POS			(1)
+#define RXON_RX_CHAIN_FORCE_SEL_MSK		cpu_to_le16(0x7 << 4)
+#define RXON_RX_CHAIN_FORCE_SEL_POS		(4)
+#define RXON_RX_CHAIN_FORCE_MIMO_SEL_MSK	cpu_to_le16(0x7 << 7)
+#define RXON_RX_CHAIN_FORCE_MIMO_SEL_POS	(7)
+#define RXON_RX_CHAIN_CNT_MSK			cpu_to_le16(0x3 << 10)
+#define RXON_RX_CHAIN_CNT_POS			(10)
+#define RXON_RX_CHAIN_MIMO_CNT_MSK		cpu_to_le16(0x3 << 12)
+#define RXON_RX_CHAIN_MIMO_CNT_POS		(12)
+#define RXON_RX_CHAIN_MIMO_FORCE_MSK		cpu_to_le16(0x1 << 14)
+#define RXON_RX_CHAIN_MIMO_FORCE_POS		(14)
+
+/* rx_config flags */
+/* band & modulation selection */
+#define RXON_FLG_BAND_24G_MSK           cpu_to_le32(1 << 0)
+#define RXON_FLG_CCK_MSK                cpu_to_le32(1 << 1)
+/* auto detection enable */
+#define RXON_FLG_AUTO_DETECT_MSK        cpu_to_le32(1 << 2)
+/* TGg protection when tx */
+#define RXON_FLG_TGG_PROTECT_MSK        cpu_to_le32(1 << 3)
+/* cck short slot & preamble */
+#define RXON_FLG_SHORT_SLOT_MSK          cpu_to_le32(1 << 4)
+#define RXON_FLG_SHORT_PREAMBLE_MSK     cpu_to_le32(1 << 5)
+/* antenna selection */
+#define RXON_FLG_DIS_DIV_MSK            cpu_to_le32(1 << 7)
+#define RXON_FLG_ANT_SEL_MSK            cpu_to_le32(0x0f00)
+#define RXON_FLG_ANT_A_MSK              cpu_to_le32(1 << 8)
+#define RXON_FLG_ANT_B_MSK              cpu_to_le32(1 << 9)
+/* radar detection enable */
+#define RXON_FLG_RADAR_DETECT_MSK       cpu_to_le32(1 << 12)
+#define RXON_FLG_TGJ_NARROW_BAND_MSK    cpu_to_le32(1 << 13)
+/* rx response to host with 8-byte TSF
+* (according to ON_AIR deassertion) */
+#define RXON_FLG_TSF2HOST_MSK           cpu_to_le32(1 << 15)
+
+
+/* HT flags */
+#define RXON_FLG_CTRL_CHANNEL_LOC_POS		(22)
+#define RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK	cpu_to_le32(0x1 << 22)
+
+#define RXON_FLG_HT_OPERATING_MODE_POS		(23)
+
+#define RXON_FLG_HT_PROT_MSK			cpu_to_le32(0x1 << 23)
+#define RXON_FLG_HT40_PROT_MSK			cpu_to_le32(0x2 << 23)
+
+#define RXON_FLG_CHANNEL_MODE_POS		(25)
+#define RXON_FLG_CHANNEL_MODE_MSK		cpu_to_le32(0x3 << 25)
+
+/* channel mode */
+enum {
+	CHANNEL_MODE_LEGACY = 0,
+	CHANNEL_MODE_PURE_40 = 1,
+	CHANNEL_MODE_MIXED = 2,
+	CHANNEL_MODE_RESERVED = 3,
+};
+#define RXON_FLG_CHANNEL_MODE_LEGACY	cpu_to_le32(CHANNEL_MODE_LEGACY << RXON_FLG_CHANNEL_MODE_POS)
+#define RXON_FLG_CHANNEL_MODE_PURE_40	cpu_to_le32(CHANNEL_MODE_PURE_40 << RXON_FLG_CHANNEL_MODE_POS)
+#define RXON_FLG_CHANNEL_MODE_MIXED	cpu_to_le32(CHANNEL_MODE_MIXED << RXON_FLG_CHANNEL_MODE_POS)
+
+/* CTS to self (if spec allows) flag */
+#define RXON_FLG_SELF_CTS_EN			cpu_to_le32(0x1<<30)
+
+/* rx_config filter flags */
+/* accept all data frames */
+#define RXON_FILTER_PROMISC_MSK         cpu_to_le32(1 << 0)
+/* pass control & management to host */
+#define RXON_FILTER_CTL2HOST_MSK        cpu_to_le32(1 << 1)
+/* accept multi-cast */
+#define RXON_FILTER_ACCEPT_GRP_MSK      cpu_to_le32(1 << 2)
+/* don't decrypt uni-cast frames */
+#define RXON_FILTER_DIS_DECRYPT_MSK     cpu_to_le32(1 << 3)
+/* don't decrypt multi-cast frames */
+#define RXON_FILTER_DIS_GRP_DECRYPT_MSK cpu_to_le32(1 << 4)
+/* STA is associated */
+#define RXON_FILTER_ASSOC_MSK           cpu_to_le32(1 << 5)
+/* transfer to host non bssid beacons in associated state */
+#define RXON_FILTER_BCON_AWARE_MSK      cpu_to_le32(1 << 6)
+
+/**
+ * REPLY_RXON = 0x10 (command, has simple generic response)
+ *
+ * RXON tunes the radio tuner to a service channel, and sets up a number
+ * of parameters that are used primarily for Rx, but also for Tx operations.
+ *
+ * NOTE:  When tuning to a new channel, driver must set the
+ *        RXON_FILTER_ASSOC_MSK to 0.  This will clear station-dependent
+ *        info within the device, including the station tables, tx retry
+ *        rate tables, and txpower tables.  Driver must build a new station
+ *        table and txpower table before transmitting anything on the RXON
+ *        channel.
+ *
+ * NOTE:  All RXONs wipe clean the internal txpower table.  Driver must
+ *        issue a new REPLY_TX_PWR_TABLE_CMD after each REPLY_RXON (0x10),
+ *        regardless of whether RXON_FILTER_ASSOC_MSK is set.
+ */
+
+struct iwl_rxon_cmd {
+	u8 node_addr[6];
+	__le16 reserved1;
+	u8 bssid_addr[6];
+	__le16 reserved2;
+	u8 wlap_bssid_addr[6];
+	__le16 reserved3;
+	u8 dev_type;
+	u8 air_propagation;
+	__le16 rx_chain;
+	u8 ofdm_basic_rates;
+	u8 cck_basic_rates;
+	__le16 assoc_id;
+	__le32 flags;
+	__le32 filter_flags;
+	__le16 channel;
+	u8 ofdm_ht_single_stream_basic_rates;
+	u8 ofdm_ht_dual_stream_basic_rates;
+	u8 ofdm_ht_triple_stream_basic_rates;
+	u8 reserved5;
+	__le16 acquisition_data;
+	__le16 reserved6;
+} __packed;
+
+/*
+ * REPLY_RXON_ASSOC = 0x11 (command, has simple generic response)
+ */
+struct iwl_rxon_assoc_cmd {
+	__le32 flags;
+	__le32 filter_flags;
+	u8 ofdm_basic_rates;
+	u8 cck_basic_rates;
+	__le16 reserved1;
+	u8 ofdm_ht_single_stream_basic_rates;
+	u8 ofdm_ht_dual_stream_basic_rates;
+	u8 ofdm_ht_triple_stream_basic_rates;
+	u8 reserved2;
+	__le16 rx_chain_select_flags;
+	__le16 acquisition_data;
+	__le32 reserved3;
+} __packed;
+
+#define IWL_CONN_MAX_LISTEN_INTERVAL	10
+#define IWL_MAX_UCODE_BEACON_INTERVAL	4 /* 4096 */
+
+/*
+ * REPLY_RXON_TIMING = 0x14 (command, has simple generic response)
+ */
+struct iwl_rxon_time_cmd {
+	__le64 timestamp;
+	__le16 beacon_interval;
+	__le16 atim_window;
+	__le32 beacon_init_val;
+	__le16 listen_interval;
+	u8 dtim_period;
+	u8 delta_cp_bss_tbtts;
+} __packed;
+
+/*
+ * REPLY_CHANNEL_SWITCH = 0x72 (command, has simple generic response)
+ */
+/**
+ * struct iwl5000_channel_switch_cmd
+ * @band: 0- 5.2GHz, 1- 2.4GHz
+ * @expect_beacon: 0- resume transmits after channel switch
+ *		   1- wait for beacon to resume transmits
+ * @channel: new channel number
+ * @rxon_flags: Rx on flags
+ * @rxon_filter_flags: filtering parameters
+ * @switch_time: switch time in extended beacon format
+ * @reserved: reserved bytes
+ */
+struct iwl5000_channel_switch_cmd {
+	u8 band;
+	u8 expect_beacon;
+	__le16 channel;
+	__le32 rxon_flags;
+	__le32 rxon_filter_flags;
+	__le32 switch_time;
+	__le32 reserved[2][IWL_PWR_NUM_HT_OFDM_ENTRIES + IWL_PWR_CCK_ENTRIES];
+} __packed;
+
+/**
+ * struct iwl6000_channel_switch_cmd
+ * @band: 0- 5.2GHz, 1- 2.4GHz
+ * @expect_beacon: 0- resume transmits after channel switch
+ *		   1- wait for beacon to resume transmits
+ * @channel: new channel number
+ * @rxon_flags: Rx on flags
+ * @rxon_filter_flags: filtering parameters
+ * @switch_time: switch time in extended beacon format
+ * @reserved: reserved bytes
+ */
+struct iwl6000_channel_switch_cmd {
+	u8 band;
+	u8 expect_beacon;
+	__le16 channel;
+	__le32 rxon_flags;
+	__le32 rxon_filter_flags;
+	__le32 switch_time;
+	__le32 reserved[3][IWL_PWR_NUM_HT_OFDM_ENTRIES + IWL_PWR_CCK_ENTRIES];
+} __packed;
+
+/*
+ * CHANNEL_SWITCH_NOTIFICATION = 0x73 (notification only, not a command)
+ */
+struct iwl_csa_notification {
+	__le16 band;
+	__le16 channel;
+	__le32 status;		/* 0 - OK, 1 - fail */
+} __packed;
+
+/******************************************************************************
+ * (2)
+ * Quality-of-Service (QOS) Commands & Responses:
+ *
+ *****************************************************************************/
+
+/**
+ * struct iwl_ac_qos -- QOS timing params for REPLY_QOS_PARAM
+ * One for each of 4 EDCA access categories in struct iwl_qosparam_cmd
+ *
+ * @cw_min: Contention window, start value in numbers of slots.
+ *          Should be a power-of-2, minus 1.  Device's default is 0x0f.
+ * @cw_max: Contention window, max value in numbers of slots.
+ *          Should be a power-of-2, minus 1.  Device's default is 0x3f.
+ * @aifsn:  Number of slots in Arbitration Interframe Space (before
+ *          performing random backoff timing prior to Tx).  Device default 1.
+ * @edca_txop:  Length of Tx opportunity, in uSecs.  Device default is 0.
+ *
+ * Device will automatically increase contention window by (2*CW) + 1 for each
+ * transmission retry.  Device uses cw_max as a bit mask, ANDed with new CW
+ * value, to cap the CW value.
+ */
+struct iwl_ac_qos {
+	__le16 cw_min;
+	__le16 cw_max;
+	u8 aifsn;
+	u8 reserved1;
+	__le16 edca_txop;
+} __packed;
+
+/* QoS flags defines */
+#define QOS_PARAM_FLG_UPDATE_EDCA_MSK	cpu_to_le32(0x01)
+#define QOS_PARAM_FLG_TGN_MSK		cpu_to_le32(0x02)
+#define QOS_PARAM_FLG_TXOP_TYPE_MSK	cpu_to_le32(0x10)
+
+/* Number of Access Categories (AC) (EDCA), queues 0..3 */
+#define AC_NUM                4
+
+/*
+ * REPLY_QOS_PARAM = 0x13 (command, has simple generic response)
+ *
+ * This command sets up timings for each of the 4 prioritized EDCA Tx FIFOs
+ * 0: Background, 1: Best Effort, 2: Video, 3: Voice.
+ */
+struct iwl_qosparam_cmd {
+	__le32 qos_flags;
+	struct iwl_ac_qos ac[AC_NUM];
+} __packed;
+
+/******************************************************************************
+ * (3)
+ * Add/Modify Stations Commands & Responses:
+ *
+ *****************************************************************************/
+/*
+ * Multi station support
+ */
+
+/* Special, dedicated locations within device's station table */
+#define	IWL_AP_ID		0
+#define	IWL_AP_ID_PAN		1
+#define	IWL_STA_ID		2
+#define IWLAGN_PAN_BCAST_ID	14
+#define IWLAGN_BROADCAST_ID	15
+#define	IWLAGN_STATION_COUNT	16
+
+#define	IWL_INVALID_STATION 	255
+#define IWL_MAX_TID_COUNT	8
+#define IWL_TID_NON_QOS IWL_MAX_TID_COUNT
+
+#define STA_FLG_TX_RATE_MSK		cpu_to_le32(1 << 2)
+#define STA_FLG_PWR_SAVE_MSK		cpu_to_le32(1 << 8)
+#define STA_FLG_PAN_STATION		cpu_to_le32(1 << 13)
+#define STA_FLG_RTS_MIMO_PROT_MSK	cpu_to_le32(1 << 17)
+#define STA_FLG_AGG_MPDU_8US_MSK	cpu_to_le32(1 << 18)
+#define STA_FLG_MAX_AGG_SIZE_POS	(19)
+#define STA_FLG_MAX_AGG_SIZE_MSK	cpu_to_le32(3 << 19)
+#define STA_FLG_HT40_EN_MSK		cpu_to_le32(1 << 21)
+#define STA_FLG_MIMO_DIS_MSK		cpu_to_le32(1 << 22)
+#define STA_FLG_AGG_MPDU_DENSITY_POS	(23)
+#define STA_FLG_AGG_MPDU_DENSITY_MSK	cpu_to_le32(7 << 23)
+
+/* Use in mode field.  1: modify existing entry, 0: add new station entry */
+#define STA_CONTROL_MODIFY_MSK		0x01
+
+/* key flags __le16*/
+#define STA_KEY_FLG_ENCRYPT_MSK	cpu_to_le16(0x0007)
+#define STA_KEY_FLG_NO_ENC	cpu_to_le16(0x0000)
+#define STA_KEY_FLG_WEP		cpu_to_le16(0x0001)
+#define STA_KEY_FLG_CCMP	cpu_to_le16(0x0002)
+#define STA_KEY_FLG_TKIP	cpu_to_le16(0x0003)
+
+#define STA_KEY_FLG_KEYID_POS	8
+#define STA_KEY_FLG_INVALID 	cpu_to_le16(0x0800)
+/* wep key is either from global key (0) or from station info array (1) */
+#define STA_KEY_FLG_MAP_KEY_MSK	cpu_to_le16(0x0008)
+
+/* wep key in STA: 5-bytes (0) or 13-bytes (1) */
+#define STA_KEY_FLG_KEY_SIZE_MSK     cpu_to_le16(0x1000)
+#define STA_KEY_MULTICAST_MSK        cpu_to_le16(0x4000)
+#define STA_KEY_MAX_NUM		8
+#define STA_KEY_MAX_NUM_PAN	16
+/* must not match WEP_INVALID_OFFSET */
+#define IWLAGN_HW_KEY_DEFAULT	0xfe
+
+/* Flags indicate whether to modify vs. don't change various station params */
+#define	STA_MODIFY_KEY_MASK		0x01
+#define	STA_MODIFY_TID_DISABLE_TX	0x02
+#define	STA_MODIFY_TX_RATE_MSK		0x04
+#define STA_MODIFY_ADDBA_TID_MSK	0x08
+#define STA_MODIFY_DELBA_TID_MSK	0x10
+#define STA_MODIFY_SLEEP_TX_COUNT_MSK	0x20
+
+/* Receiver address (actually, Rx station's index into station table),
+ * combined with Traffic ID (QOS priority), in format used by Tx Scheduler */
+#define BUILD_RAxTID(sta_id, tid)	(((sta_id) << 4) + (tid))
+
+/* agn */
+struct iwl_keyinfo {
+	__le16 key_flags;
+	u8 tkip_rx_tsc_byte2;	/* TSC[2] for key mix ph1 detection */
+	u8 reserved1;
+	__le16 tkip_rx_ttak[5];	/* 10-byte unicast TKIP TTAK */
+	u8 key_offset;
+	u8 reserved2;
+	u8 key[16];		/* 16-byte unicast decryption key */
+	__le64 tx_secur_seq_cnt;
+	__le64 hw_tkip_mic_rx_key;
+	__le64 hw_tkip_mic_tx_key;
+} __packed;
+
+/**
+ * struct sta_id_modify
+ * @addr[ETH_ALEN]: station's MAC address
+ * @sta_id: index of station in uCode's station table
+ * @modify_mask: STA_MODIFY_*, 1: modify, 0: don't change
+ *
+ * Driver selects unused table index when adding new station,
+ * or the index to a pre-existing station entry when modifying that station.
+ * Some indexes have special purposes (IWL_AP_ID, index 0, is for AP).
+ *
+ * modify_mask flags select which parameters to modify vs. leave alone.
+ */
+struct sta_id_modify {
+	u8 addr[ETH_ALEN];
+	__le16 reserved1;
+	u8 sta_id;
+	u8 modify_mask;
+	__le16 reserved2;
+} __packed;
+
+/*
+ * REPLY_ADD_STA = 0x18 (command)
+ *
+ * The device contains an internal table of per-station information,
+ * with info on security keys, aggregation parameters, and Tx rates for
+ * initial Tx attempt and any retries (agn devices uses
+ * REPLY_TX_LINK_QUALITY_CMD,
+ *
+ * REPLY_ADD_STA sets up the table entry for one station, either creating
+ * a new entry, or modifying a pre-existing one.
+ *
+ * NOTE:  RXON command (without "associated" bit set) wipes the station table
+ *        clean.  Moving into RF_KILL state does this also.  Driver must set up
+ *        new station table before transmitting anything on the RXON channel
+ *        (except active scans or active measurements; those commands carry
+ *        their own txpower/rate setup data).
+ *
+ *        When getting started on a new channel, driver must set up the
+ *        IWL_BROADCAST_ID entry (last entry in the table).  For a client
+ *        station in a BSS, once an AP is selected, driver sets up the AP STA
+ *        in the IWL_AP_ID entry (1st entry in the table).  BROADCAST and AP
+ *        are all that are needed for a BSS client station.  If the device is
+ *        used as AP, or in an IBSS network, driver must set up station table
+ *        entries for all STAs in network, starting with index IWL_STA_ID.
+ */
+
+struct iwl_addsta_cmd {
+	u8 mode;		/* 1: modify existing, 0: add new station */
+	u8 reserved[3];
+	struct sta_id_modify sta;
+	struct iwl_keyinfo key;
+	__le32 station_flags;		/* STA_FLG_* */
+	__le32 station_flags_msk;	/* STA_FLG_* */
+
+	/* bit field to disable (1) or enable (0) Tx for Traffic ID (TID)
+	 * corresponding to bit (e.g. bit 5 controls TID 5).
+	 * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */
+	__le16 tid_disable_tx;
+	__le16 legacy_reserved;
+
+	/* TID for which to add block-ack support.
+	 * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
+	u8 add_immediate_ba_tid;
+
+	/* TID for which to remove block-ack support.
+	 * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */
+	u8 remove_immediate_ba_tid;
+
+	/* Starting Sequence Number for added block-ack support.
+	 * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
+	__le16 add_immediate_ba_ssn;
+
+	/*
+	 * Number of packets OK to transmit to station even though
+	 * it is asleep -- used to synchronise PS-poll and u-APSD
+	 * responses while ucode keeps track of STA sleep state.
+	 */
+	__le16 sleep_tx_count;
+
+	__le16 reserved2;
+} __packed;
+
+
+#define ADD_STA_SUCCESS_MSK		0x1
+#define ADD_STA_NO_ROOM_IN_TABLE	0x2
+#define ADD_STA_NO_BLOCK_ACK_RESOURCE	0x4
+#define ADD_STA_MODIFY_NON_EXIST_STA	0x8
+/*
+ * REPLY_ADD_STA = 0x18 (response)
+ */
+struct iwl_add_sta_resp {
+	u8 status;	/* ADD_STA_* */
+} __packed;
+
+#define REM_STA_SUCCESS_MSK              0x1
+/*
+ *  REPLY_REM_STA = 0x19 (response)
+ */
+struct iwl_rem_sta_resp {
+	u8 status;
+} __packed;
+
+/*
+ *  REPLY_REM_STA = 0x19 (command)
+ */
+struct iwl_rem_sta_cmd {
+	u8 num_sta;     /* number of removed stations */
+	u8 reserved[3];
+	u8 addr[ETH_ALEN]; /* MAC addr of the first station */
+	u8 reserved2[2];
+} __packed;
+
+
+/* WiFi queues mask */
+#define IWL_SCD_BK_MSK			cpu_to_le32(BIT(0))
+#define IWL_SCD_BE_MSK			cpu_to_le32(BIT(1))
+#define IWL_SCD_VI_MSK			cpu_to_le32(BIT(2))
+#define IWL_SCD_VO_MSK			cpu_to_le32(BIT(3))
+#define IWL_SCD_MGMT_MSK		cpu_to_le32(BIT(3))
+
+/* PAN queues mask */
+#define IWL_PAN_SCD_BK_MSK		cpu_to_le32(BIT(4))
+#define IWL_PAN_SCD_BE_MSK		cpu_to_le32(BIT(5))
+#define IWL_PAN_SCD_VI_MSK		cpu_to_le32(BIT(6))
+#define IWL_PAN_SCD_VO_MSK		cpu_to_le32(BIT(7))
+#define IWL_PAN_SCD_MGMT_MSK		cpu_to_le32(BIT(7))
+#define IWL_PAN_SCD_MULTICAST_MSK	cpu_to_le32(BIT(8))
+
+#define IWL_AGG_TX_QUEUE_MSK		cpu_to_le32(0xffc00)
+
+#define IWL_DROP_SINGLE		0
+#define IWL_DROP_ALL		(BIT(IWL_RXON_CTX_BSS) | BIT(IWL_RXON_CTX_PAN))
+
+/*
+ * REPLY_TXFIFO_FLUSH = 0x1e(command and response)
+ *
+ * When using full FIFO flush this command checks the scheduler HW block WR/RD
+ * pointers to check if all the frames were transferred by DMA into the
+ * relevant TX FIFO queue. Only when the DMA is finished and the queue is
+ * empty the command can finish.
+ * This command is used to flush the TXFIFO from transmit commands, it may
+ * operate on single or multiple queues, the command queue can't be flushed by
+ * this command. The command response is returned when all the queue flush
+ * operations are done. Each TX command flushed return response with the FLUSH
+ * status set in the TX response status. When FIFO flush operation is used,
+ * the flush operation ends when both the scheduler DMA done and TXFIFO empty
+ * are set.
+ *
+ * @fifo_control: bit mask for which queues to flush
+ * @flush_control: flush controls
+ *	0: Dump single MSDU
+ *	1: Dump multiple MSDU according to PS, INVALID STA, TTL, TID disable.
+ *	2: Dump all FIFO
+ */
+struct iwl_txfifo_flush_cmd {
+	__le32 fifo_control;
+	__le16 flush_control;
+	__le16 reserved;
+} __packed;
+
+/*
+ * REPLY_WEP_KEY = 0x20
+ */
+struct iwl_wep_key {
+	u8 key_index;
+	u8 key_offset;
+	u8 reserved1[2];
+	u8 key_size;
+	u8 reserved2[3];
+	u8 key[16];
+} __packed;
+
+struct iwl_wep_cmd {
+	u8 num_keys;
+	u8 global_key_type;
+	u8 flags;
+	u8 reserved;
+	struct iwl_wep_key key[0];
+} __packed;
+
+#define WEP_KEY_WEP_TYPE 1
+#define WEP_KEYS_MAX 4
+#define WEP_INVALID_OFFSET 0xff
+#define WEP_KEY_LEN_64 5
+#define WEP_KEY_LEN_128 13
+
+/******************************************************************************
+ * (4)
+ * Rx Responses:
+ *
+ *****************************************************************************/
+
+#define RX_RES_STATUS_NO_CRC32_ERROR	cpu_to_le32(1 << 0)
+#define RX_RES_STATUS_NO_RXE_OVERFLOW	cpu_to_le32(1 << 1)
+
+#define RX_RES_PHY_FLAGS_BAND_24_MSK	cpu_to_le16(1 << 0)
+#define RX_RES_PHY_FLAGS_MOD_CCK_MSK		cpu_to_le16(1 << 1)
+#define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK	cpu_to_le16(1 << 2)
+#define RX_RES_PHY_FLAGS_NARROW_BAND_MSK	cpu_to_le16(1 << 3)
+#define RX_RES_PHY_FLAGS_ANTENNA_MSK		0xf0
+#define RX_RES_PHY_FLAGS_ANTENNA_POS		4
+
+#define RX_RES_STATUS_SEC_TYPE_MSK	(0x7 << 8)
+#define RX_RES_STATUS_SEC_TYPE_NONE	(0x0 << 8)
+#define RX_RES_STATUS_SEC_TYPE_WEP	(0x1 << 8)
+#define RX_RES_STATUS_SEC_TYPE_CCMP	(0x2 << 8)
+#define RX_RES_STATUS_SEC_TYPE_TKIP	(0x3 << 8)
+#define	RX_RES_STATUS_SEC_TYPE_ERR	(0x7 << 8)
+
+#define RX_RES_STATUS_STATION_FOUND	(1<<6)
+#define RX_RES_STATUS_NO_STATION_INFO_MISMATCH	(1<<7)
+
+#define RX_RES_STATUS_DECRYPT_TYPE_MSK	(0x3 << 11)
+#define RX_RES_STATUS_NOT_DECRYPT	(0x0 << 11)
+#define RX_RES_STATUS_DECRYPT_OK	(0x3 << 11)
+#define RX_RES_STATUS_BAD_ICV_MIC	(0x1 << 11)
+#define RX_RES_STATUS_BAD_KEY_TTAK	(0x2 << 11)
+
+#define RX_MPDU_RES_STATUS_ICV_OK	(0x20)
+#define RX_MPDU_RES_STATUS_MIC_OK	(0x40)
+#define RX_MPDU_RES_STATUS_TTAK_OK	(1 << 7)
+#define RX_MPDU_RES_STATUS_DEC_DONE_MSK	(0x800)
+
+
+#define IWLAGN_RX_RES_PHY_CNT 8
+#define IWLAGN_RX_RES_AGC_IDX     1
+#define IWLAGN_RX_RES_RSSI_AB_IDX 2
+#define IWLAGN_RX_RES_RSSI_C_IDX  3
+#define IWLAGN_OFDM_AGC_MSK 0xfe00
+#define IWLAGN_OFDM_AGC_BIT_POS 9
+#define IWLAGN_OFDM_RSSI_INBAND_A_BITMSK 0x00ff
+#define IWLAGN_OFDM_RSSI_ALLBAND_A_BITMSK 0xff00
+#define IWLAGN_OFDM_RSSI_A_BIT_POS 0
+#define IWLAGN_OFDM_RSSI_INBAND_B_BITMSK 0xff0000
+#define IWLAGN_OFDM_RSSI_ALLBAND_B_BITMSK 0xff000000
+#define IWLAGN_OFDM_RSSI_B_BIT_POS 16
+#define IWLAGN_OFDM_RSSI_INBAND_C_BITMSK 0x00ff
+#define IWLAGN_OFDM_RSSI_ALLBAND_C_BITMSK 0xff00
+#define IWLAGN_OFDM_RSSI_C_BIT_POS 0
+
+struct iwlagn_non_cfg_phy {
+	__le32 non_cfg_phy[IWLAGN_RX_RES_PHY_CNT];  /* up to 8 phy entries */
+} __packed;
+
+
+/*
+ * REPLY_RX = 0xc3 (response only, not a command)
+ * Used only for legacy (non 11n) frames.
+ */
+struct iwl_rx_phy_res {
+	u8 non_cfg_phy_cnt;     /* non configurable DSP phy data byte count */
+	u8 cfg_phy_cnt;		/* configurable DSP phy data byte count */
+	u8 stat_id;		/* configurable DSP phy data set ID */
+	u8 reserved1;
+	__le64 timestamp;	/* TSF at on air rise */
+	__le32 beacon_time_stamp; /* beacon at on-air rise */
+	__le16 phy_flags;	/* general phy flags: band, modulation, ... */
+	__le16 channel;		/* channel number */
+	u8 non_cfg_phy_buf[32]; /* for various implementations of non_cfg_phy */
+	__le32 rate_n_flags;	/* RATE_MCS_* */
+	__le16 byte_count;	/* frame's byte-count */
+	__le16 frame_time;	/* frame's time on the air */
+} __packed;
+
+struct iwl_rx_mpdu_res_start {
+	__le16 byte_count;
+	__le16 reserved;
+} __packed;
+
+
+/******************************************************************************
+ * (5)
+ * Tx Commands & Responses:
+ *
+ * Driver must place each REPLY_TX command into one of the prioritized Tx
+ * queues in host DRAM, shared between driver and device (see comments for
+ * SCD registers and Tx/Rx Queues).  When the device's Tx scheduler and uCode
+ * are preparing to transmit, the device pulls the Tx command over the PCI
+ * bus via one of the device's Tx DMA channels, to fill an internal FIFO
+ * from which data will be transmitted.
+ *
+ * uCode handles all timing and protocol related to control frames
+ * (RTS/CTS/ACK), based on flags in the Tx command.  uCode and Tx scheduler
+ * handle reception of block-acks; uCode updates the host driver via
+ * REPLY_COMPRESSED_BA.
+ *
+ * uCode handles retrying Tx when an ACK is expected but not received.
+ * This includes trying lower data rates than the one requested in the Tx
+ * command, as set up by the REPLY_TX_LINK_QUALITY_CMD (agn).
+ *
+ * Driver sets up transmit power for various rates via REPLY_TX_PWR_TABLE_CMD.
+ * This command must be executed after every RXON command, before Tx can occur.
+ *****************************************************************************/
+
+/* REPLY_TX Tx flags field */
+
+/*
+ * 1: Use RTS/CTS protocol or CTS-to-self if spec allows it
+ * before this frame. if CTS-to-self required check
+ * RXON_FLG_SELF_CTS_EN status.
+ */
+#define TX_CMD_FLG_PROT_REQUIRE_MSK cpu_to_le32(1 << 0)
+
+/* 1: Expect ACK from receiving station
+ * 0: Don't expect ACK (MAC header's duration field s/b 0)
+ * Set this for unicast frames, but not broadcast/multicast. */
+#define TX_CMD_FLG_ACK_MSK cpu_to_le32(1 << 3)
+
+/* For agn devices:
+ * 1: Use rate scale table (see REPLY_TX_LINK_QUALITY_CMD).
+ *    Tx command's initial_rate_index indicates first rate to try;
+ *    uCode walks through table for additional Tx attempts.
+ * 0: Use Tx rate/MCS from Tx command's rate_n_flags field.
+ *    This rate will be used for all Tx attempts; it will not be scaled. */
+#define TX_CMD_FLG_STA_RATE_MSK cpu_to_le32(1 << 4)
+
+/* 1: Expect immediate block-ack.
+ * Set when Txing a block-ack request frame.  Also set TX_CMD_FLG_ACK_MSK. */
+#define TX_CMD_FLG_IMM_BA_RSP_MASK  cpu_to_le32(1 << 6)
+
+/* Tx antenna selection field; reserved (0) for agn devices. */
+#define TX_CMD_FLG_ANT_SEL_MSK cpu_to_le32(0xf00)
+
+/* 1: Ignore Bluetooth priority for this frame.
+ * 0: Delay Tx until Bluetooth device is done (normal usage). */
+#define TX_CMD_FLG_IGNORE_BT cpu_to_le32(1 << 12)
+
+/* 1: uCode overrides sequence control field in MAC header.
+ * 0: Driver provides sequence control field in MAC header.
+ * Set this for management frames, non-QOS data frames, non-unicast frames,
+ * and also in Tx command embedded in REPLY_SCAN_CMD for active scans. */
+#define TX_CMD_FLG_SEQ_CTL_MSK cpu_to_le32(1 << 13)
+
+/* 1: This frame is non-last MPDU; more fragments are coming.
+ * 0: Last fragment, or not using fragmentation. */
+#define TX_CMD_FLG_MORE_FRAG_MSK cpu_to_le32(1 << 14)
+
+/* 1: uCode calculates and inserts Timestamp Function (TSF) in outgoing frame.
+ * 0: No TSF required in outgoing frame.
+ * Set this for transmitting beacons and probe responses. */
+#define TX_CMD_FLG_TSF_MSK cpu_to_le32(1 << 16)
+
+/* 1: Driver inserted 2 bytes pad after the MAC header, for (required) dword
+ *    alignment of frame's payload data field.
+ * 0: No pad
+ * Set this for MAC headers with 26 or 30 bytes, i.e. those with QOS or ADDR4
+ * field (but not both).  Driver must align frame data (i.e. data following
+ * MAC header) to DWORD boundary. */
+#define TX_CMD_FLG_MH_PAD_MSK cpu_to_le32(1 << 20)
+
+/* accelerate aggregation support
+ * 0 - no CCMP encryption; 1 - CCMP encryption */
+#define TX_CMD_FLG_AGG_CCMP_MSK cpu_to_le32(1 << 22)
+
+/* HCCA-AP - disable duration overwriting. */
+#define TX_CMD_FLG_DUR_MSK cpu_to_le32(1 << 25)
+
+
+/*
+ * TX command security control
+ */
+#define TX_CMD_SEC_WEP  	0x01
+#define TX_CMD_SEC_CCM  	0x02
+#define TX_CMD_SEC_TKIP		0x03
+#define TX_CMD_SEC_MSK		0x03
+#define TX_CMD_SEC_SHIFT	6
+#define TX_CMD_SEC_KEY128	0x08
+
+/*
+ * security overhead sizes
+ */
+#define WEP_IV_LEN 4
+#define WEP_ICV_LEN 4
+#define CCMP_MIC_LEN 8
+#define TKIP_ICV_LEN 4
+
+/*
+ * REPLY_TX = 0x1c (command)
+ */
+
+/*
+ * 4965 uCode updates these Tx attempt count values in host DRAM.
+ * Used for managing Tx retries when expecting block-acks.
+ * Driver should set these fields to 0.
+ */
+struct iwl_dram_scratch {
+	u8 try_cnt;		/* Tx attempts */
+	u8 bt_kill_cnt;		/* Tx attempts blocked by Bluetooth device */
+	__le16 reserved;
+} __packed;
+
+struct iwl_tx_cmd {
+	/*
+	 * MPDU byte count:
+	 * MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size,
+	 * + 8 byte IV for CCM or TKIP (not used for WEP)
+	 * + Data payload
+	 * + 8-byte MIC (not used for CCM/WEP)
+	 * NOTE:  Does not include Tx command bytes, post-MAC pad bytes,
+	 *        MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i
+	 * Range: 14-2342 bytes.
+	 */
+	__le16 len;
+
+	/*
+	 * MPDU or MSDU byte count for next frame.
+	 * Used for fragmentation and bursting, but not 11n aggregation.
+	 * Same as "len", but for next frame.  Set to 0 if not applicable.
+	 */
+	__le16 next_frame_len;
+
+	__le32 tx_flags;	/* TX_CMD_FLG_* */
+
+	/* uCode may modify this field of the Tx command (in host DRAM!).
+	 * Driver must also set dram_lsb_ptr and dram_msb_ptr in this cmd. */
+	struct iwl_dram_scratch scratch;
+
+	/* Rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is cleared. */
+	__le32 rate_n_flags;	/* RATE_MCS_* */
+
+	/* Index of destination station in uCode's station table */
+	u8 sta_id;
+
+	/* Type of security encryption:  CCM or TKIP */
+	u8 sec_ctl;		/* TX_CMD_SEC_* */
+
+	/*
+	 * Index into rate table (see REPLY_TX_LINK_QUALITY_CMD) for initial
+	 * Tx attempt, if TX_CMD_FLG_STA_RATE_MSK is set.  Normally "0" for
+	 * data frames, this field may be used to selectively reduce initial
+	 * rate (via non-0 value) for special frames (e.g. management), while
+	 * still supporting rate scaling for all frames.
+	 */
+	u8 initial_rate_index;
+	u8 reserved;
+	u8 key[16];
+	__le16 next_frame_flags;
+	__le16 reserved2;
+	union {
+		__le32 life_time;
+		__le32 attempt;
+	} stop_time;
+
+	/* Host DRAM physical address pointer to "scratch" in this command.
+	 * Must be dword aligned.  "0" in dram_lsb_ptr disables usage. */
+	__le32 dram_lsb_ptr;
+	u8 dram_msb_ptr;
+
+	u8 rts_retry_limit;	/*byte 50 */
+	u8 data_retry_limit;	/*byte 51 */
+	u8 tid_tspec;
+	union {
+		__le16 pm_frame_timeout;
+		__le16 attempt_duration;
+	} timeout;
+
+	/*
+	 * Duration of EDCA burst Tx Opportunity, in 32-usec units.
+	 * Set this if txop time is not specified by HCCA protocol (e.g. by AP).
+	 */
+	__le16 driver_txop;
+
+	/*
+	 * MAC header goes here, followed by 2 bytes padding if MAC header
+	 * length is 26 or 30 bytes, followed by payload data
+	 */
+	u8 payload[0];
+	struct ieee80211_hdr hdr[0];
+} __packed;
+
+/*
+ * TX command response is sent after *agn* transmission attempts.
+ *
+ * both postpone and abort status are expected behavior from uCode. there is
+ * no special operation required from driver; except for RFKILL_FLUSH,
+ * which required tx flush host command to flush all the tx frames in queues
+ */
+enum {
+	TX_STATUS_SUCCESS = 0x01,
+	TX_STATUS_DIRECT_DONE = 0x02,
+	/* postpone TX */
+	TX_STATUS_POSTPONE_DELAY = 0x40,
+	TX_STATUS_POSTPONE_FEW_BYTES = 0x41,
+	TX_STATUS_POSTPONE_BT_PRIO = 0x42,
+	TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43,
+	TX_STATUS_POSTPONE_CALC_TTAK = 0x44,
+	/* abort TX */
+	TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81,
+	TX_STATUS_FAIL_SHORT_LIMIT = 0x82,
+	TX_STATUS_FAIL_LONG_LIMIT = 0x83,
+	TX_STATUS_FAIL_FIFO_UNDERRUN = 0x84,
+	TX_STATUS_FAIL_DRAIN_FLOW = 0x85,
+	TX_STATUS_FAIL_RFKILL_FLUSH = 0x86,
+	TX_STATUS_FAIL_LIFE_EXPIRE = 0x87,
+	TX_STATUS_FAIL_DEST_PS = 0x88,
+	TX_STATUS_FAIL_HOST_ABORTED = 0x89,
+	TX_STATUS_FAIL_BT_RETRY = 0x8a,
+	TX_STATUS_FAIL_STA_INVALID = 0x8b,
+	TX_STATUS_FAIL_FRAG_DROPPED = 0x8c,
+	TX_STATUS_FAIL_TID_DISABLE = 0x8d,
+	TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e,
+	TX_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f,
+	TX_STATUS_FAIL_PASSIVE_NO_RX = 0x90,
+	TX_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91,
+};
+
+#define	TX_PACKET_MODE_REGULAR		0x0000
+#define	TX_PACKET_MODE_BURST_SEQ	0x0100
+#define	TX_PACKET_MODE_BURST_FIRST	0x0200
+
+enum {
+	TX_POWER_PA_NOT_ACTIVE = 0x0,
+};
+
+enum {
+	TX_STATUS_MSK = 0x000000ff,		/* bits 0:7 */
+	TX_STATUS_DELAY_MSK = 0x00000040,
+	TX_STATUS_ABORT_MSK = 0x00000080,
+	TX_PACKET_MODE_MSK = 0x0000ff00,	/* bits 8:15 */
+	TX_FIFO_NUMBER_MSK = 0x00070000,	/* bits 16:18 */
+	TX_RESERVED = 0x00780000,		/* bits 19:22 */
+	TX_POWER_PA_DETECT_MSK = 0x7f800000,	/* bits 23:30 */
+	TX_ABORT_REQUIRED_MSK = 0x80000000,	/* bits 31:31 */
+};
+
+/* *******************************
+ * TX aggregation status
+ ******************************* */
+
+enum {
+	AGG_TX_STATE_TRANSMITTED = 0x00,
+	AGG_TX_STATE_UNDERRUN_MSK = 0x01,
+	AGG_TX_STATE_BT_PRIO_MSK = 0x02,
+	AGG_TX_STATE_FEW_BYTES_MSK = 0x04,
+	AGG_TX_STATE_ABORT_MSK = 0x08,
+	AGG_TX_STATE_LAST_SENT_TTL_MSK = 0x10,
+	AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK = 0x20,
+	AGG_TX_STATE_LAST_SENT_BT_KILL_MSK = 0x40,
+	AGG_TX_STATE_SCD_QUERY_MSK = 0x80,
+	AGG_TX_STATE_TEST_BAD_CRC32_MSK = 0x100,
+	AGG_TX_STATE_RESPONSE_MSK = 0x1ff,
+	AGG_TX_STATE_DUMP_TX_MSK = 0x200,
+	AGG_TX_STATE_DELAY_TX_MSK = 0x400
+};
+
+#define AGG_TX_STATUS_MSK	0x00000fff	/* bits 0:11 */
+#define AGG_TX_TRY_MSK		0x0000f000	/* bits 12:15 */
+
+#define AGG_TX_STATE_LAST_SENT_MSK  (AGG_TX_STATE_LAST_SENT_TTL_MSK | \
+				     AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK | \
+				     AGG_TX_STATE_LAST_SENT_BT_KILL_MSK)
+
+/* # tx attempts for first frame in aggregation */
+#define AGG_TX_STATE_TRY_CNT_POS 12
+#define AGG_TX_STATE_TRY_CNT_MSK 0xf000
+
+/* Command ID and sequence number of Tx command for this frame */
+#define AGG_TX_STATE_SEQ_NUM_POS 16
+#define AGG_TX_STATE_SEQ_NUM_MSK 0xffff0000
+
+/*
+ * REPLY_TX = 0x1c (response)
+ *
+ * This response may be in one of two slightly different formats, indicated
+ * by the frame_count field:
+ *
+ * 1)  No aggregation (frame_count == 1).  This reports Tx results for
+ *     a single frame.  Multiple attempts, at various bit rates, may have
+ *     been made for this frame.
+ *
+ * 2)  Aggregation (frame_count > 1).  This reports Tx results for
+ *     2 or more frames that used block-acknowledge.  All frames were
+ *     transmitted at same rate.  Rate scaling may have been used if first
+ *     frame in this new agg block failed in previous agg block(s).
+ *
+ *     Note that, for aggregation, ACK (block-ack) status is not delivered here;
+ *     block-ack has not been received by the time the agn device records
+ *     this status.
+ *     This status relates to reasons the tx might have been blocked or aborted
+ *     within the sending station (this agn device), rather than whether it was
+ *     received successfully by the destination station.
+ */
+struct agg_tx_status {
+	__le16 status;
+	__le16 sequence;
+} __packed;
+
+/*
+ * definitions for initial rate index field
+ * bits [3:0] initial rate index
+ * bits [6:4] rate table color, used for the initial rate
+ * bit-7 invalid rate indication
+ *   i.e. rate was not chosen from rate table
+ *   or rate table color was changed during frame retries
+ * refer tlc rate info
+ */
+
+#define IWL50_TX_RES_INIT_RATE_INDEX_POS	0
+#define IWL50_TX_RES_INIT_RATE_INDEX_MSK	0x0f
+#define IWL50_TX_RES_RATE_TABLE_COLOR_POS	4
+#define IWL50_TX_RES_RATE_TABLE_COLOR_MSK	0x70
+#define IWL50_TX_RES_INV_RATE_INDEX_MSK	0x80
+
+/* refer to ra_tid */
+#define IWLAGN_TX_RES_TID_POS	0
+#define IWLAGN_TX_RES_TID_MSK	0x0f
+#define IWLAGN_TX_RES_RA_POS	4
+#define IWLAGN_TX_RES_RA_MSK	0xf0
+
+struct iwlagn_tx_resp {
+	u8 frame_count;		/* 1 no aggregation, >1 aggregation */
+	u8 bt_kill_count;	/* # blocked by bluetooth (unused for agg) */
+	u8 failure_rts;		/* # failures due to unsuccessful RTS */
+	u8 failure_frame;	/* # failures due to no ACK (unused for agg) */
+
+	/* For non-agg:  Rate at which frame was successful.
+	 * For agg:  Rate at which all frames were transmitted. */
+	__le32 rate_n_flags;	/* RATE_MCS_*  */
+
+	/* For non-agg:  RTS + CTS + frame tx attempts time + ACK.
+	 * For agg:  RTS + CTS + aggregation tx time + block-ack time. */
+	__le16 wireless_media_time;	/* uSecs */
+
+	u8 pa_status;		/* RF power amplifier measurement (not used) */
+	u8 pa_integ_res_a[3];
+	u8 pa_integ_res_b[3];
+	u8 pa_integ_res_C[3];
+
+	__le32 tfd_info;
+	__le16 seq_ctl;
+	__le16 byte_cnt;
+	u8 tlc_info;
+	u8 ra_tid;		/* tid (0:3), sta_id (4:7) */
+	__le16 frame_ctrl;
+	/*
+	 * For non-agg:  frame status TX_STATUS_*
+	 * For agg:  status of 1st frame, AGG_TX_STATE_*; other frame status
+	 *           fields follow this one, up to frame_count.
+	 *           Bit fields:
+	 *           11- 0:  AGG_TX_STATE_* status code
+	 *           15-12:  Retry count for 1st frame in aggregation (retries
+	 *                   occur if tx failed for this frame when it was a
+	 *                   member of a previous aggregation block).  If rate
+	 *                   scaling is used, retry count indicates the rate
+	 *                   table entry used for all frames in the new agg.
+	 *           31-16:  Sequence # for this frame's Tx cmd (not SSN!)
+	 */
+	struct agg_tx_status status;	/* TX status (in aggregation -
+					 * status of 1st frame) */
+} __packed;
+/*
+ * REPLY_COMPRESSED_BA = 0xc5 (response only, not a command)
+ *
+ * Reports Block-Acknowledge from recipient station
+ */
+struct iwl_compressed_ba_resp {
+	__le32 sta_addr_lo32;
+	__le16 sta_addr_hi16;
+	__le16 reserved;
+
+	/* Index of recipient (BA-sending) station in uCode's station table */
+	u8 sta_id;
+	u8 tid;
+	__le16 seq_ctl;
+	__le64 bitmap;
+	__le16 scd_flow;
+	__le16 scd_ssn;
+	u8 txed;	/* number of frames sent */
+	u8 txed_2_done; /* number of frames acked */
+} __packed;
+
+/*
+ * REPLY_TX_PWR_TABLE_CMD = 0x97 (command, has simple generic response)
+ *
+ */
+
+/*RS_NEW_API: only TLC_RTS remains and moved to bit 0 */
+#define  LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK	(1 << 0)
+
+/* # of EDCA prioritized tx fifos */
+#define  LINK_QUAL_AC_NUM AC_NUM
+
+/* # entries in rate scale table to support Tx retries */
+#define  LINK_QUAL_MAX_RETRY_NUM 16
+
+/* Tx antenna selection values */
+#define  LINK_QUAL_ANT_A_MSK (1 << 0)
+#define  LINK_QUAL_ANT_B_MSK (1 << 1)
+#define  LINK_QUAL_ANT_MSK   (LINK_QUAL_ANT_A_MSK|LINK_QUAL_ANT_B_MSK)
+
+
+/**
+ * struct iwl_link_qual_general_params
+ *
+ * Used in REPLY_TX_LINK_QUALITY_CMD
+ */
+struct iwl_link_qual_general_params {
+	u8 flags;
+
+	/* No entries at or above this (driver chosen) index contain MIMO */
+	u8 mimo_delimiter;
+
+	/* Best single antenna to use for single stream (legacy, SISO). */
+	u8 single_stream_ant_msk;	/* LINK_QUAL_ANT_* */
+
+	/* Best antennas to use for MIMO (unused for 4965, assumes both). */
+	u8 dual_stream_ant_msk;		/* LINK_QUAL_ANT_* */
+
+	/*
+	 * If driver needs to use different initial rates for different
+	 * EDCA QOS access categories (as implemented by tx fifos 0-3),
+	 * this table will set that up, by indicating the indexes in the
+	 * rs_table[LINK_QUAL_MAX_RETRY_NUM] rate table at which to start.
+	 * Otherwise, driver should set all entries to 0.
+	 *
+	 * Entry usage:
+	 * 0 = Background, 1 = Best Effort (normal), 2 = Video, 3 = Voice
+	 * TX FIFOs above 3 use same value (typically 0) as TX FIFO 3.
+	 */
+	u8 start_rate_index[LINK_QUAL_AC_NUM];
+} __packed;
+
+#define LINK_QUAL_AGG_TIME_LIMIT_DEF	(4000) /* 4 milliseconds */
+#define LINK_QUAL_AGG_TIME_LIMIT_MAX	(8000)
+#define LINK_QUAL_AGG_TIME_LIMIT_MIN	(100)
+
+#define LINK_QUAL_AGG_DISABLE_START_DEF	(3)
+#define LINK_QUAL_AGG_DISABLE_START_MAX	(255)
+#define LINK_QUAL_AGG_DISABLE_START_MIN	(0)
+
+#define LINK_QUAL_AGG_FRAME_LIMIT_DEF	(63)
+#define LINK_QUAL_AGG_FRAME_LIMIT_MAX	(63)
+#define LINK_QUAL_AGG_FRAME_LIMIT_MIN	(0)
+
+/**
+ * struct iwl_link_qual_agg_params
+ *
+ * Used in REPLY_TX_LINK_QUALITY_CMD
+ */
+struct iwl_link_qual_agg_params {
+
+	/*
+	 *Maximum number of uSec in aggregation.
+	 * default set to 4000 (4 milliseconds) if not configured in .cfg
+	 */
+	__le16 agg_time_limit;
+
+	/*
+	 * Number of Tx retries allowed for a frame, before that frame will
+	 * no longer be considered for the start of an aggregation sequence
+	 * (scheduler will then try to tx it as single frame).
+	 * Driver should set this to 3.
+	 */
+	u8 agg_dis_start_th;
+
+	/*
+	 * Maximum number of frames in aggregation.
+	 * 0 = no limit (default).  1 = no aggregation.
+	 * Other values = max # frames in aggregation.
+	 */
+	u8 agg_frame_cnt_limit;
+
+	__le32 reserved;
+} __packed;
+
+/*
+ * REPLY_TX_LINK_QUALITY_CMD = 0x4e (command, has simple generic response)
+ *
+ * For agn devices
+ *
+ * Each station in the agn device's internal station table has its own table
+ * of 16
+ * Tx rates and modulation modes (e.g. legacy/SISO/MIMO) for retrying Tx when
+ * an ACK is not received.  This command replaces the entire table for
+ * one station.
+ *
+ * NOTE:  Station must already be in agn device's station table.
+ *	  Use REPLY_ADD_STA.
+ *
+ * The rate scaling procedures described below work well.  Of course, other
+ * procedures are possible, and may work better for particular environments.
+ *
+ *
+ * FILLING THE RATE TABLE
+ *
+ * Given a particular initial rate and mode, as determined by the rate
+ * scaling algorithm described below, the Linux driver uses the following
+ * formula to fill the rs_table[LINK_QUAL_MAX_RETRY_NUM] rate table in the
+ * Link Quality command:
+ *
+ *
+ * 1)  If using High-throughput (HT) (SISO or MIMO) initial rate:
+ *     a) Use this same initial rate for first 3 entries.
+ *     b) Find next lower available rate using same mode (SISO or MIMO),
+ *        use for next 3 entries.  If no lower rate available, switch to
+ *        legacy mode (no HT40 channel, no MIMO, no short guard interval).
+ *     c) If using MIMO, set command's mimo_delimiter to number of entries
+ *        using MIMO (3 or 6).
+ *     d) After trying 2 HT rates, switch to legacy mode (no HT40 channel,
+ *        no MIMO, no short guard interval), at the next lower bit rate
+ *        (e.g. if second HT bit rate was 54, try 48 legacy), and follow
+ *        legacy procedure for remaining table entries.
+ *
+ * 2)  If using legacy initial rate:
+ *     a) Use the initial rate for only one entry.
+ *     b) For each following entry, reduce the rate to next lower available
+ *        rate, until reaching the lowest available rate.
+ *     c) When reducing rate, also switch antenna selection.
+ *     d) Once lowest available rate is reached, repeat this rate until
+ *        rate table is filled (16 entries), switching antenna each entry.
+ *
+ *
+ * ACCUMULATING HISTORY
+ *
+ * The rate scaling algorithm for agn devices, as implemented in Linux driver,
+ * uses two sets of frame Tx success history:  One for the current/active
+ * modulation mode, and one for a speculative/search mode that is being
+ * attempted. If the speculative mode turns out to be more effective (i.e.
+ * actual transfer rate is better), then the driver continues to use the
+ * speculative mode as the new current active mode.
+ *
+ * Each history set contains, separately for each possible rate, data for a
+ * sliding window of the 62 most recent tx attempts at that rate.  The data
+ * includes a shifting bitmap of success(1)/failure(0), and sums of successful
+ * and attempted frames, from which the driver can additionally calculate a
+ * success ratio (success / attempted) and number of failures
+ * (attempted - success), and control the size of the window (attempted).
+ * The driver uses the bit map to remove successes from the success sum, as
+ * the oldest tx attempts fall out of the window.
+ *
+ * When the agn device makes multiple tx attempts for a given frame, each
+ * attempt might be at a different rate, and have different modulation
+ * characteristics (e.g. antenna, fat channel, short guard interval), as set
+ * up in the rate scaling table in the Link Quality command.  The driver must
+ * determine which rate table entry was used for each tx attempt, to determine
+ * which rate-specific history to update, and record only those attempts that
+ * match the modulation characteristics of the history set.
+ *
+ * When using block-ack (aggregation), all frames are transmitted at the same
+ * rate, since there is no per-attempt acknowledgment from the destination
+ * station.  The Tx response struct iwl_tx_resp indicates the Tx rate in
+ * rate_n_flags field.  After receiving a block-ack, the driver can update
+ * history for the entire block all at once.
+ *
+ *
+ * FINDING BEST STARTING RATE:
+ *
+ * When working with a selected initial modulation mode (see below), the
+ * driver attempts to find a best initial rate.  The initial rate is the
+ * first entry in the Link Quality command's rate table.
+ *
+ * 1)  Calculate actual throughput (success ratio * expected throughput, see
+ *     table below) for current initial rate.  Do this only if enough frames
+ *     have been attempted to make the value meaningful:  at least 6 failed
+ *     tx attempts, or at least 8 successes.  If not enough, don't try rate
+ *     scaling yet.
+ *
+ * 2)  Find available rates adjacent to current initial rate.  Available means:
+ *     a)  supported by hardware &&
+ *     b)  supported by association &&
+ *     c)  within any constraints selected by user
+ *
+ * 3)  Gather measured throughputs for adjacent rates.  These might not have
+ *     enough history to calculate a throughput.  That's okay, we might try
+ *     using one of them anyway!
+ *
+ * 4)  Try decreasing rate if, for current rate:
+ *     a)  success ratio is < 15% ||
+ *     b)  lower adjacent rate has better measured throughput ||
+ *     c)  higher adjacent rate has worse throughput, and lower is unmeasured
+ *
+ *     As a sanity check, if decrease was determined above, leave rate
+ *     unchanged if:
+ *     a)  lower rate unavailable
+ *     b)  success ratio at current rate > 85% (very good)
+ *     c)  current measured throughput is better than expected throughput
+ *         of lower rate (under perfect 100% tx conditions, see table below)
+ *
+ * 5)  Try increasing rate if, for current rate:
+ *     a)  success ratio is < 15% ||
+ *     b)  both adjacent rates' throughputs are unmeasured (try it!) ||
+ *     b)  higher adjacent rate has better measured throughput ||
+ *     c)  lower adjacent rate has worse throughput, and higher is unmeasured
+ *
+ *     As a sanity check, if increase was determined above, leave rate
+ *     unchanged if:
+ *     a)  success ratio at current rate < 70%.  This is not particularly
+ *         good performance; higher rate is sure to have poorer success.
+ *
+ * 6)  Re-evaluate the rate after each tx frame.  If working with block-
+ *     acknowledge, history and statistics may be calculated for the entire
+ *     block (including prior history that fits within the history windows),
+ *     before re-evaluation.
+ *
+ * FINDING BEST STARTING MODULATION MODE:
+ *
+ * After working with a modulation mode for a "while" (and doing rate scaling),
+ * the driver searches for a new initial mode in an attempt to improve
+ * throughput.  The "while" is measured by numbers of attempted frames:
+ *
+ * For legacy mode, search for new mode after:
+ *   480 successful frames, or 160 failed frames
+ * For high-throughput modes (SISO or MIMO), search for new mode after:
+ *   4500 successful frames, or 400 failed frames
+ *
+ * Mode switch possibilities are (3 for each mode):
+ *
+ * For legacy:
+ *   Change antenna, try SISO (if HT association), try MIMO (if HT association)
+ * For SISO:
+ *   Change antenna, try MIMO, try shortened guard interval (SGI)
+ * For MIMO:
+ *   Try SISO antenna A, SISO antenna B, try shortened guard interval (SGI)
+ *
+ * When trying a new mode, use the same bit rate as the old/current mode when
+ * trying antenna switches and shortened guard interval.  When switching to
+ * SISO from MIMO or legacy, or to MIMO from SISO or legacy, use a rate
+ * for which the expected throughput (under perfect conditions) is about the
+ * same or slightly better than the actual measured throughput delivered by
+ * the old/current mode.
+ *
+ * Actual throughput can be estimated by multiplying the expected throughput
+ * by the success ratio (successful / attempted tx frames).  Frame size is
+ * not considered in this calculation; it assumes that frame size will average
+ * out to be fairly consistent over several samples.  The following are
+ * metric values for expected throughput assuming 100% success ratio.
+ * Only G band has support for CCK rates:
+ *
+ *           RATE:  1    2    5   11    6   9   12   18   24   36   48   54   60
+ *
+ *              G:  7   13   35   58   40  57   72   98  121  154  177  186  186
+ *              A:  0    0    0    0   40  57   72   98  121  154  177  186  186
+ *     SISO 20MHz:  0    0    0    0   42  42   76  102  124  159  183  193  202
+ * SGI SISO 20MHz:  0    0    0    0   46  46   82  110  132  168  192  202  211
+ *     MIMO 20MHz:  0    0    0    0   74  74  123  155  179  214  236  244  251
+ * SGI MIMO 20MHz:  0    0    0    0   81  81  131  164  188  222  243  251  257
+ *     SISO 40MHz:  0    0    0    0   77  77  127  160  184  220  242  250  257
+ * SGI SISO 40MHz:  0    0    0    0   83  83  135  169  193  229  250  257  264
+ *     MIMO 40MHz:  0    0    0    0  123 123  182  214  235  264  279  285  289
+ * SGI MIMO 40MHz:  0    0    0    0  131 131  191  222  242  270  284  289  293
+ *
+ * After the new mode has been tried for a short while (minimum of 6 failed
+ * frames or 8 successful frames), compare success ratio and actual throughput
+ * estimate of the new mode with the old.  If either is better with the new
+ * mode, continue to use the new mode.
+ *
+ * Continue comparing modes until all 3 possibilities have been tried.
+ * If moving from legacy to HT, try all 3 possibilities from the new HT
+ * mode.  After trying all 3, a best mode is found.  Continue to use this mode
+ * for the longer "while" described above (e.g. 480 successful frames for
+ * legacy), and then repeat the search process.
+ *
+ */
+struct iwl_link_quality_cmd {
+
+	/* Index of destination/recipient station in uCode's station table */
+	u8 sta_id;
+	u8 reserved1;
+	__le16 control;		/* not used */
+	struct iwl_link_qual_general_params general_params;
+	struct iwl_link_qual_agg_params agg_params;
+
+	/*
+	 * Rate info; when using rate-scaling, Tx command's initial_rate_index
+	 * specifies 1st Tx rate attempted, via index into this table.
+	 * agn devices works its way through table when retrying Tx.
+	 */
+	struct {
+		__le32 rate_n_flags;	/* RATE_MCS_*, IWL_RATE_* */
+	} rs_table[LINK_QUAL_MAX_RETRY_NUM];
+	__le32 reserved2;
+} __packed;
+
+/*
+ * BT configuration enable flags:
+ *   bit 0 - 1: BT channel announcement enabled
+ *           0: disable
+ *   bit 1 - 1: priority of BT device enabled
+ *           0: disable
+ *   bit 2 - 1: BT 2 wire support enabled
+ *           0: disable
+ */
+#define BT_COEX_DISABLE (0x0)
+#define BT_ENABLE_CHANNEL_ANNOUNCE BIT(0)
+#define BT_ENABLE_PRIORITY	   BIT(1)
+#define BT_ENABLE_2_WIRE	   BIT(2)
+
+#define BT_COEX_DISABLE (0x0)
+#define BT_COEX_ENABLE  (BT_ENABLE_CHANNEL_ANNOUNCE | BT_ENABLE_PRIORITY)
+
+#define BT_LEAD_TIME_MIN (0x0)
+#define BT_LEAD_TIME_DEF (0x1E)
+#define BT_LEAD_TIME_MAX (0xFF)
+
+#define BT_MAX_KILL_MIN (0x1)
+#define BT_MAX_KILL_DEF (0x5)
+#define BT_MAX_KILL_MAX (0xFF)
+
+#define BT_DURATION_LIMIT_DEF	625
+#define BT_DURATION_LIMIT_MAX	1250
+#define BT_DURATION_LIMIT_MIN	625
+
+#define BT_ON_THRESHOLD_DEF	4
+#define BT_ON_THRESHOLD_MAX	1000
+#define BT_ON_THRESHOLD_MIN	1
+
+#define BT_FRAG_THRESHOLD_DEF	0
+#define BT_FRAG_THRESHOLD_MAX	0
+#define BT_FRAG_THRESHOLD_MIN	0
+
+#define BT_AGG_THRESHOLD_DEF	1200
+#define BT_AGG_THRESHOLD_MAX	8000
+#define BT_AGG_THRESHOLD_MIN	400
+
+/*
+ * REPLY_BT_CONFIG = 0x9b (command, has simple generic response)
+ *
+ * agn devices support hardware handshake with Bluetooth device on
+ * same platform.  Bluetooth device alerts wireless device when it will Tx;
+ * wireless device can delay or kill its own Tx to accommodate.
+ */
+struct iwl_bt_cmd {
+	u8 flags;
+	u8 lead_time;
+	u8 max_kill;
+	u8 reserved;
+	__le32 kill_ack_mask;
+	__le32 kill_cts_mask;
+} __packed;
+
+#define IWLAGN_BT_FLAG_CHANNEL_INHIBITION	BIT(0)
+
+#define IWLAGN_BT_FLAG_COEX_MODE_MASK		(BIT(3)|BIT(4)|BIT(5))
+#define IWLAGN_BT_FLAG_COEX_MODE_SHIFT		3
+#define IWLAGN_BT_FLAG_COEX_MODE_DISABLED	0
+#define IWLAGN_BT_FLAG_COEX_MODE_LEGACY_2W	1
+#define IWLAGN_BT_FLAG_COEX_MODE_3W		2
+#define IWLAGN_BT_FLAG_COEX_MODE_4W		3
+
+#define IWLAGN_BT_FLAG_UCODE_DEFAULT		BIT(6)
+/* Disable Sync PSPoll on SCO/eSCO */
+#define IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE	BIT(7)
+
+#define IWLAGN_BT_PSP_MIN_RSSI_THRESHOLD	-75 /* dBm */
+#define IWLAGN_BT_PSP_MAX_RSSI_THRESHOLD	-65 /* dBm */
+
+#define IWLAGN_BT_PRIO_BOOST_MAX	0xFF
+#define IWLAGN_BT_PRIO_BOOST_MIN	0x00
+#define IWLAGN_BT_PRIO_BOOST_DEFAULT	0xF0
+
+#define IWLAGN_BT_MAX_KILL_DEFAULT	5
+
+#define IWLAGN_BT3_T7_DEFAULT		1
+
+enum iwl_bt_kill_idx {
+	IWL_BT_KILL_DEFAULT = 0,
+	IWL_BT_KILL_OVERRIDE = 1,
+	IWL_BT_KILL_REDUCE = 2,
+};
+
+#define IWLAGN_BT_KILL_ACK_MASK_DEFAULT	cpu_to_le32(0xffff0000)
+#define IWLAGN_BT_KILL_CTS_MASK_DEFAULT	cpu_to_le32(0xffff0000)
+#define IWLAGN_BT_KILL_ACK_CTS_MASK_SCO	cpu_to_le32(0xffffffff)
+#define IWLAGN_BT_KILL_ACK_CTS_MASK_REDUCE	cpu_to_le32(0)
+
+#define IWLAGN_BT3_PRIO_SAMPLE_DEFAULT	2
+
+#define IWLAGN_BT3_T2_DEFAULT		0xc
+
+#define IWLAGN_BT_VALID_ENABLE_FLAGS	cpu_to_le16(BIT(0))
+#define IWLAGN_BT_VALID_BOOST		cpu_to_le16(BIT(1))
+#define IWLAGN_BT_VALID_MAX_KILL	cpu_to_le16(BIT(2))
+#define IWLAGN_BT_VALID_3W_TIMERS	cpu_to_le16(BIT(3))
+#define IWLAGN_BT_VALID_KILL_ACK_MASK	cpu_to_le16(BIT(4))
+#define IWLAGN_BT_VALID_KILL_CTS_MASK	cpu_to_le16(BIT(5))
+#define IWLAGN_BT_VALID_REDUCED_TX_PWR	cpu_to_le16(BIT(6))
+#define IWLAGN_BT_VALID_3W_LUT		cpu_to_le16(BIT(7))
+
+#define IWLAGN_BT_ALL_VALID_MSK		(IWLAGN_BT_VALID_ENABLE_FLAGS | \
+					IWLAGN_BT_VALID_BOOST | \
+					IWLAGN_BT_VALID_MAX_KILL | \
+					IWLAGN_BT_VALID_3W_TIMERS | \
+					IWLAGN_BT_VALID_KILL_ACK_MASK | \
+					IWLAGN_BT_VALID_KILL_CTS_MASK | \
+					IWLAGN_BT_VALID_REDUCED_TX_PWR | \
+					IWLAGN_BT_VALID_3W_LUT)
+
+#define IWLAGN_BT_REDUCED_TX_PWR	BIT(0)
+
+#define IWLAGN_BT_DECISION_LUT_SIZE	12
+
+struct iwl_basic_bt_cmd {
+	u8 flags;
+	u8 ledtime; /* unused */
+	u8 max_kill;
+	u8 bt3_timer_t7_value;
+	__le32 kill_ack_mask;
+	__le32 kill_cts_mask;
+	u8 bt3_prio_sample_time;
+	u8 bt3_timer_t2_value;
+	__le16 bt4_reaction_time; /* unused */
+	__le32 bt3_lookup_table[IWLAGN_BT_DECISION_LUT_SIZE];
+	/*
+	 * bit 0: use reduced tx power for control frame
+	 * bit 1 - 7: reserved
+	 */
+	u8 reduce_txpower;
+	u8 reserved;
+	__le16 valid;
+};
+
+struct iwl_bt_cmd_v1 {
+	struct iwl_basic_bt_cmd basic;
+	u8 prio_boost;
+	/*
+	 * set IWLAGN_BT_VALID_BOOST to "1" in "valid" bitmask
+	 * if configure the following patterns
+	 */
+	u8 tx_prio_boost;	/* SW boost of WiFi tx priority */
+	__le16 rx_prio_boost;	/* SW boost of WiFi rx priority */
+};
+
+struct iwl_bt_cmd_v2 {
+	struct iwl_basic_bt_cmd basic;
+	__le32 prio_boost;
+	/*
+	 * set IWLAGN_BT_VALID_BOOST to "1" in "valid" bitmask
+	 * if configure the following patterns
+	 */
+	u8 reserved;
+	u8 tx_prio_boost;	/* SW boost of WiFi tx priority */
+	__le16 rx_prio_boost;	/* SW boost of WiFi rx priority */
+};
+
+#define IWLAGN_BT_SCO_ACTIVE	cpu_to_le32(BIT(0))
+
+struct iwlagn_bt_sco_cmd {
+	__le32 flags;
+};
+
+/******************************************************************************
+ * (6)
+ * Spectrum Management (802.11h) Commands, Responses, Notifications:
+ *
+ *****************************************************************************/
+
+/*
+ * Spectrum Management
+ */
+#define MEASUREMENT_FILTER_FLAG (RXON_FILTER_PROMISC_MSK         | \
+				 RXON_FILTER_CTL2HOST_MSK        | \
+				 RXON_FILTER_ACCEPT_GRP_MSK      | \
+				 RXON_FILTER_DIS_DECRYPT_MSK     | \
+				 RXON_FILTER_DIS_GRP_DECRYPT_MSK | \
+				 RXON_FILTER_ASSOC_MSK           | \
+				 RXON_FILTER_BCON_AWARE_MSK)
+
+struct iwl_measure_channel {
+	__le32 duration;	/* measurement duration in extended beacon
+				 * format */
+	u8 channel;		/* channel to measure */
+	u8 type;		/* see enum iwl_measure_type */
+	__le16 reserved;
+} __packed;
+
+/*
+ * REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74 (command)
+ */
+struct iwl_spectrum_cmd {
+	__le16 len;		/* number of bytes starting from token */
+	u8 token;		/* token id */
+	u8 id;			/* measurement id -- 0 or 1 */
+	u8 origin;		/* 0 = TGh, 1 = other, 2 = TGk */
+	u8 periodic;		/* 1 = periodic */
+	__le16 path_loss_timeout;
+	__le32 start_time;	/* start time in extended beacon format */
+	__le32 reserved2;
+	__le32 flags;		/* rxon flags */
+	__le32 filter_flags;	/* rxon filter flags */
+	__le16 channel_count;	/* minimum 1, maximum 10 */
+	__le16 reserved3;
+	struct iwl_measure_channel channels[10];
+} __packed;
+
+/*
+ * REPLY_SPECTRUM_MEASUREMENT_CMD = 0x74 (response)
+ */
+struct iwl_spectrum_resp {
+	u8 token;
+	u8 id;			/* id of the prior command replaced, or 0xff */
+	__le16 status;		/* 0 - command will be handled
+				 * 1 - cannot handle (conflicts with another
+				 *     measurement) */
+} __packed;
+
+enum iwl_measurement_state {
+	IWL_MEASUREMENT_START = 0,
+	IWL_MEASUREMENT_STOP = 1,
+};
+
+enum iwl_measurement_status {
+	IWL_MEASUREMENT_OK = 0,
+	IWL_MEASUREMENT_CONCURRENT = 1,
+	IWL_MEASUREMENT_CSA_CONFLICT = 2,
+	IWL_MEASUREMENT_TGH_CONFLICT = 3,
+	/* 4-5 reserved */
+	IWL_MEASUREMENT_STOPPED = 6,
+	IWL_MEASUREMENT_TIMEOUT = 7,
+	IWL_MEASUREMENT_PERIODIC_FAILED = 8,
+};
+
+#define NUM_ELEMENTS_IN_HISTOGRAM 8
+
+struct iwl_measurement_histogram {
+	__le32 ofdm[NUM_ELEMENTS_IN_HISTOGRAM];	/* in 0.8usec counts */
+	__le32 cck[NUM_ELEMENTS_IN_HISTOGRAM];	/* in 1usec counts */
+} __packed;
+
+/* clear channel availability counters */
+struct iwl_measurement_cca_counters {
+	__le32 ofdm;
+	__le32 cck;
+} __packed;
+
+enum iwl_measure_type {
+	IWL_MEASURE_BASIC = (1 << 0),
+	IWL_MEASURE_CHANNEL_LOAD = (1 << 1),
+	IWL_MEASURE_HISTOGRAM_RPI = (1 << 2),
+	IWL_MEASURE_HISTOGRAM_NOISE = (1 << 3),
+	IWL_MEASURE_FRAME = (1 << 4),
+	/* bits 5:6 are reserved */
+	IWL_MEASURE_IDLE = (1 << 7),
+};
+
+/*
+ * SPECTRUM_MEASURE_NOTIFICATION = 0x75 (notification only, not a command)
+ */
+struct iwl_spectrum_notification {
+	u8 id;			/* measurement id -- 0 or 1 */
+	u8 token;
+	u8 channel_index;	/* index in measurement channel list */
+	u8 state;		/* 0 - start, 1 - stop */
+	__le32 start_time;	/* lower 32-bits of TSF */
+	u8 band;		/* 0 - 5.2GHz, 1 - 2.4GHz */
+	u8 channel;
+	u8 type;		/* see enum iwl_measurement_type */
+	u8 reserved1;
+	/* NOTE:  cca_ofdm, cca_cck, basic_type, and histogram are only only
+	 * valid if applicable for measurement type requested. */
+	__le32 cca_ofdm;	/* cca fraction time in 40Mhz clock periods */
+	__le32 cca_cck;		/* cca fraction time in 44Mhz clock periods */
+	__le32 cca_time;	/* channel load time in usecs */
+	u8 basic_type;		/* 0 - bss, 1 - ofdm preamble, 2 -
+				 * unidentified */
+	u8 reserved2[3];
+	struct iwl_measurement_histogram histogram;
+	__le32 stop_time;	/* lower 32-bits of TSF */
+	__le32 status;		/* see iwl_measurement_status */
+} __packed;
+
+/******************************************************************************
+ * (7)
+ * Power Management Commands, Responses, Notifications:
+ *
+ *****************************************************************************/
+
+/**
+ * struct iwl_powertable_cmd - Power Table Command
+ * @flags: See below:
+ *
+ * POWER_TABLE_CMD = 0x77 (command, has simple generic response)
+ *
+ * PM allow:
+ *   bit 0 - '0' Driver not allow power management
+ *           '1' Driver allow PM (use rest of parameters)
+ *
+ * uCode send sleep notifications:
+ *   bit 1 - '0' Don't send sleep notification
+ *           '1' send sleep notification (SEND_PM_NOTIFICATION)
+ *
+ * Sleep over DTIM
+ *   bit 2 - '0' PM have to walk up every DTIM
+ *           '1' PM could sleep over DTIM till listen Interval.
+ *
+ * PCI power managed
+ *   bit 3 - '0' (PCI_CFG_LINK_CTRL & 0x1)
+ *           '1' !(PCI_CFG_LINK_CTRL & 0x1)
+ *
+ * Fast PD
+ *   bit 4 - '1' Put radio to sleep when receiving frame for others
+ *
+ * Force sleep Modes
+ *   bit 31/30- '00' use both mac/xtal sleeps
+ *              '01' force Mac sleep
+ *              '10' force xtal sleep
+ *              '11' Illegal set
+ *
+ * NOTE: if sleep_interval[SLEEP_INTRVL_TABLE_SIZE-1] > DTIM period then
+ * ucode assume sleep over DTIM is allowed and we don't need to wake up
+ * for every DTIM.
+ */
+#define IWL_POWER_VEC_SIZE 5
+
+#define IWL_POWER_DRIVER_ALLOW_SLEEP_MSK	cpu_to_le16(BIT(0))
+#define IWL_POWER_POWER_SAVE_ENA_MSK		cpu_to_le16(BIT(0))
+#define IWL_POWER_POWER_MANAGEMENT_ENA_MSK	cpu_to_le16(BIT(1))
+#define IWL_POWER_SLEEP_OVER_DTIM_MSK		cpu_to_le16(BIT(2))
+#define IWL_POWER_PCI_PM_MSK			cpu_to_le16(BIT(3))
+#define IWL_POWER_FAST_PD			cpu_to_le16(BIT(4))
+#define IWL_POWER_BEACON_FILTERING		cpu_to_le16(BIT(5))
+#define IWL_POWER_SHADOW_REG_ENA		cpu_to_le16(BIT(6))
+#define IWL_POWER_CT_KILL_SET			cpu_to_le16(BIT(7))
+#define IWL_POWER_BT_SCO_ENA			cpu_to_le16(BIT(8))
+#define IWL_POWER_ADVANCE_PM_ENA_MSK		cpu_to_le16(BIT(9))
+
+struct iwl_powertable_cmd {
+	__le16 flags;
+	u8 keep_alive_seconds;
+	u8 debug_flags;
+	__le32 rx_data_timeout;
+	__le32 tx_data_timeout;
+	__le32 sleep_interval[IWL_POWER_VEC_SIZE];
+	__le32 keep_alive_beacons;
+} __packed;
+
+/*
+ * PM_SLEEP_NOTIFICATION = 0x7A (notification only, not a command)
+ * all devices identical.
+ */
+struct iwl_sleep_notification {
+	u8 pm_sleep_mode;
+	u8 pm_wakeup_src;
+	__le16 reserved;
+	__le32 sleep_time;
+	__le32 tsf_low;
+	__le32 bcon_timer;
+} __packed;
+
+/* Sleep states.  all devices identical. */
+enum {
+	IWL_PM_NO_SLEEP = 0,
+	IWL_PM_SLP_MAC = 1,
+	IWL_PM_SLP_FULL_MAC_UNASSOCIATE = 2,
+	IWL_PM_SLP_FULL_MAC_CARD_STATE = 3,
+	IWL_PM_SLP_PHY = 4,
+	IWL_PM_SLP_REPENT = 5,
+	IWL_PM_WAKEUP_BY_TIMER = 6,
+	IWL_PM_WAKEUP_BY_DRIVER = 7,
+	IWL_PM_WAKEUP_BY_RFKILL = 8,
+	/* 3 reserved */
+	IWL_PM_NUM_OF_MODES = 12,
+};
+
+/*
+ * REPLY_CARD_STATE_CMD = 0xa0 (command, has simple generic response)
+ */
+#define CARD_STATE_CMD_DISABLE 0x00	/* Put card to sleep */
+#define CARD_STATE_CMD_ENABLE  0x01	/* Wake up card */
+#define CARD_STATE_CMD_HALT    0x02	/* Power down permanently */
+struct iwl_card_state_cmd {
+	__le32 status;		/* CARD_STATE_CMD_* request new power state */
+} __packed;
+
+/*
+ * CARD_STATE_NOTIFICATION = 0xa1 (notification only, not a command)
+ */
+struct iwl_card_state_notif {
+	__le32 flags;
+} __packed;
+
+#define HW_CARD_DISABLED   0x01
+#define SW_CARD_DISABLED   0x02
+#define CT_CARD_DISABLED   0x04
+#define RXON_CARD_DISABLED 0x10
+
+struct iwl_ct_kill_config {
+	__le32   reserved;
+	__le32   critical_temperature_M;
+	__le32   critical_temperature_R;
+}  __packed;
+
+/* 1000, and 6x00 */
+struct iwl_ct_kill_throttling_config {
+	__le32   critical_temperature_exit;
+	__le32   reserved;
+	__le32   critical_temperature_enter;
+}  __packed;
+
+/******************************************************************************
+ * (8)
+ * Scan Commands, Responses, Notifications:
+ *
+ *****************************************************************************/
+
+#define SCAN_CHANNEL_TYPE_PASSIVE cpu_to_le32(0)
+#define SCAN_CHANNEL_TYPE_ACTIVE  cpu_to_le32(1)
+
+/**
+ * struct iwl_scan_channel - entry in REPLY_SCAN_CMD channel table
+ *
+ * One for each channel in the scan list.
+ * Each channel can independently select:
+ * 1)  SSID for directed active scans
+ * 2)  Txpower setting (for rate specified within Tx command)
+ * 3)  How long to stay on-channel (behavior may be modified by quiet_time,
+ *     quiet_plcp_th, good_CRC_th)
+ *
+ * To avoid uCode errors, make sure the following are true (see comments
+ * under struct iwl_scan_cmd about max_out_time and quiet_time):
+ * 1)  If using passive_dwell (i.e. passive_dwell != 0):
+ *     active_dwell <= passive_dwell (< max_out_time if max_out_time != 0)
+ * 2)  quiet_time <= active_dwell
+ * 3)  If restricting off-channel time (i.e. max_out_time !=0):
+ *     passive_dwell < max_out_time
+ *     active_dwell < max_out_time
+ */
+
+struct iwl_scan_channel {
+	/*
+	 * type is defined as:
+	 * 0:0 1 = active, 0 = passive
+	 * 1:20 SSID direct bit map; if a bit is set, then corresponding
+	 *     SSID IE is transmitted in probe request.
+	 * 21:31 reserved
+	 */
+	__le32 type;
+	__le16 channel;	/* band is selected by iwl_scan_cmd "flags" field */
+	u8 tx_gain;		/* gain for analog radio */
+	u8 dsp_atten;		/* gain for DSP */
+	__le16 active_dwell;	/* in 1024-uSec TU (time units), typ 5-50 */
+	__le16 passive_dwell;	/* in 1024-uSec TU (time units), typ 20-500 */
+} __packed;
+
+/* set number of direct probes __le32 type */
+#define IWL_SCAN_PROBE_MASK(n) 	cpu_to_le32((BIT(n) | (BIT(n) - BIT(1))))
+
+/**
+ * struct iwl_ssid_ie - directed scan network information element
+ *
+ * Up to 20 of these may appear in REPLY_SCAN_CMD,
+ * selected by "type" bit field in struct iwl_scan_channel;
+ * each channel may select different ssids from among the 20 entries.
+ * SSID IEs get transmitted in reverse order of entry.
+ */
+struct iwl_ssid_ie {
+	u8 id;
+	u8 len;
+	u8 ssid[32];
+} __packed;
+
+#define PROBE_OPTION_MAX		20
+#define TX_CMD_LIFE_TIME_INFINITE	cpu_to_le32(0xFFFFFFFF)
+#define IWL_GOOD_CRC_TH_DISABLED	0
+#define IWL_GOOD_CRC_TH_DEFAULT		cpu_to_le16(1)
+#define IWL_GOOD_CRC_TH_NEVER		cpu_to_le16(0xffff)
+#define IWL_MAX_CMD_SIZE 4096
+
+/*
+ * REPLY_SCAN_CMD = 0x80 (command)
+ *
+ * The hardware scan command is very powerful; the driver can set it up to
+ * maintain (relatively) normal network traffic while doing a scan in the
+ * background.  The max_out_time and suspend_time control the ratio of how
+ * long the device stays on an associated network channel ("service channel")
+ * vs. how long it's away from the service channel, i.e. tuned to other channels
+ * for scanning.
+ *
+ * max_out_time is the max time off-channel (in usec), and suspend_time
+ * is how long (in "extended beacon" format) that the scan is "suspended"
+ * after returning to the service channel.  That is, suspend_time is the
+ * time that we stay on the service channel, doing normal work, between
+ * scan segments.  The driver may set these parameters differently to support
+ * scanning when associated vs. not associated, and light vs. heavy traffic
+ * loads when associated.
+ *
+ * After receiving this command, the device's scan engine does the following;
+ *
+ * 1)  Sends SCAN_START notification to driver
+ * 2)  Checks to see if it has time to do scan for one channel
+ * 3)  Sends NULL packet, with power-save (PS) bit set to 1,
+ *     to tell AP that we're going off-channel
+ * 4)  Tunes to first channel in scan list, does active or passive scan
+ * 5)  Sends SCAN_RESULT notification to driver
+ * 6)  Checks to see if it has time to do scan on *next* channel in list
+ * 7)  Repeats 4-6 until it no longer has time to scan the next channel
+ *     before max_out_time expires
+ * 8)  Returns to service channel
+ * 9)  Sends NULL packet with PS=0 to tell AP that we're back
+ * 10) Stays on service channel until suspend_time expires
+ * 11) Repeats entire process 2-10 until list is complete
+ * 12) Sends SCAN_COMPLETE notification
+ *
+ * For fast, efficient scans, the scan command also has support for staying on
+ * a channel for just a short time, if doing active scanning and getting no
+ * responses to the transmitted probe request.  This time is controlled by
+ * quiet_time, and the number of received packets below which a channel is
+ * considered "quiet" is controlled by quiet_plcp_threshold.
+ *
+ * For active scanning on channels that have regulatory restrictions against
+ * blindly transmitting, the scan can listen before transmitting, to make sure
+ * that there is already legitimate activity on the channel.  If enough
+ * packets are cleanly received on the channel (controlled by good_CRC_th,
+ * typical value 1), the scan engine starts transmitting probe requests.
+ *
+ * Driver must use separate scan commands for 2.4 vs. 5 GHz bands.
+ *
+ * To avoid uCode errors, see timing restrictions described under
+ * struct iwl_scan_channel.
+ */
+
+enum iwl_scan_flags {
+	/* BIT(0) currently unused */
+	IWL_SCAN_FLAGS_ACTION_FRAME_TX	= BIT(1),
+	/* bits 2-7 reserved */
+};
+
+struct iwl_scan_cmd {
+	__le16 len;
+	u8 scan_flags;		/* scan flags: see enum iwl_scan_flags */
+	u8 channel_count;	/* # channels in channel list */
+	__le16 quiet_time;	/* dwell only this # millisecs on quiet channel
+				 * (only for active scan) */
+	__le16 quiet_plcp_th;	/* quiet chnl is < this # pkts (typ. 1) */
+	__le16 good_CRC_th;	/* passive -> active promotion threshold */
+	__le16 rx_chain;	/* RXON_RX_CHAIN_* */
+	__le32 max_out_time;	/* max usec to be away from associated (service)
+				 * channel */
+	__le32 suspend_time;	/* pause scan this long (in "extended beacon
+				 * format") when returning to service chnl:
+				 */
+	__le32 flags;		/* RXON_FLG_* */
+	__le32 filter_flags;	/* RXON_FILTER_* */
+
+	/* For active scans (set to all-0s for passive scans).
+	 * Does not include payload.  Must specify Tx rate; no rate scaling. */
+	struct iwl_tx_cmd tx_cmd;
+
+	/* For directed active scans (set to all-0s otherwise) */
+	struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX];
+
+	/*
+	 * Probe request frame, followed by channel list.
+	 *
+	 * Size of probe request frame is specified by byte count in tx_cmd.
+	 * Channel list follows immediately after probe request frame.
+	 * Number of channels in list is specified by channel_count.
+	 * Each channel in list is of type:
+	 *
+	 * struct iwl_scan_channel channels[0];
+	 *
+	 * NOTE:  Only one band of channels can be scanned per pass.  You
+	 * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait
+	 * for one scan to complete (i.e. receive SCAN_COMPLETE_NOTIFICATION)
+	 * before requesting another scan.
+	 */
+	u8 data[0];
+} __packed;
+
+/* Can abort will notify by complete notification with abort status. */
+#define CAN_ABORT_STATUS	cpu_to_le32(0x1)
+/* complete notification statuses */
+#define ABORT_STATUS            0x2
+
+/*
+ * REPLY_SCAN_CMD = 0x80 (response)
+ */
+struct iwl_scanreq_notification {
+	__le32 status;		/* 1: okay, 2: cannot fulfill request */
+} __packed;
+
+/*
+ * SCAN_START_NOTIFICATION = 0x82 (notification only, not a command)
+ */
+struct iwl_scanstart_notification {
+	__le32 tsf_low;
+	__le32 tsf_high;
+	__le32 beacon_timer;
+	u8 channel;
+	u8 band;
+	u8 reserved[2];
+	__le32 status;
+} __packed;
+
+#define  SCAN_OWNER_STATUS 0x1
+#define  MEASURE_OWNER_STATUS 0x2
+
+#define IWL_PROBE_STATUS_OK		0
+#define IWL_PROBE_STATUS_TX_FAILED	BIT(0)
+/* error statuses combined with TX_FAILED */
+#define IWL_PROBE_STATUS_FAIL_TTL	BIT(1)
+#define IWL_PROBE_STATUS_FAIL_BT	BIT(2)
+
+#define NUMBER_OF_STATISTICS 1	/* first __le32 is good CRC */
+/*
+ * SCAN_RESULTS_NOTIFICATION = 0x83 (notification only, not a command)
+ */
+struct iwl_scanresults_notification {
+	u8 channel;
+	u8 band;
+	u8 probe_status;
+	u8 num_probe_not_sent; /* not enough time to send */
+	__le32 tsf_low;
+	__le32 tsf_high;
+	__le32 statistics[NUMBER_OF_STATISTICS];
+} __packed;
+
+/*
+ * SCAN_COMPLETE_NOTIFICATION = 0x84 (notification only, not a command)
+ */
+struct iwl_scancomplete_notification {
+	u8 scanned_channels;
+	u8 status;
+	u8 bt_status;	/* BT On/Off status */
+	u8 last_channel;
+	__le32 tsf_low;
+	__le32 tsf_high;
+} __packed;
+
+
+/******************************************************************************
+ * (9)
+ * IBSS/AP Commands and Notifications:
+ *
+ *****************************************************************************/
+
+enum iwl_ibss_manager {
+	IWL_NOT_IBSS_MANAGER = 0,
+	IWL_IBSS_MANAGER = 1,
+};
+
+/*
+ * BEACON_NOTIFICATION = 0x90 (notification only, not a command)
+ */
+
+struct iwlagn_beacon_notif {
+	struct iwlagn_tx_resp beacon_notify_hdr;
+	__le32 low_tsf;
+	__le32 high_tsf;
+	__le32 ibss_mgr_status;
+} __packed;
+
+/*
+ * REPLY_TX_BEACON = 0x91 (command, has simple generic response)
+ */
+
+struct iwl_tx_beacon_cmd {
+	struct iwl_tx_cmd tx;
+	__le16 tim_idx;
+	u8 tim_size;
+	u8 reserved1;
+	struct ieee80211_hdr frame[0];	/* beacon frame */
+} __packed;
+
+/******************************************************************************
+ * (10)
+ * Statistics Commands and Notifications:
+ *
+ *****************************************************************************/
+
+#define IWL_TEMP_CONVERT 260
+
+#define SUP_RATE_11A_MAX_NUM_CHANNELS  8
+#define SUP_RATE_11B_MAX_NUM_CHANNELS  4
+#define SUP_RATE_11G_MAX_NUM_CHANNELS  12
+
+/* Used for passing to driver number of successes and failures per rate */
+struct rate_histogram {
+	union {
+		__le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS];
+		__le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS];
+		__le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS];
+	} success;
+	union {
+		__le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS];
+		__le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS];
+		__le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS];
+	} failed;
+} __packed;
+
+/* statistics command response */
+
+struct statistics_dbg {
+	__le32 burst_check;
+	__le32 burst_count;
+	__le32 wait_for_silence_timeout_cnt;
+	__le32 reserved[3];
+} __packed;
+
+struct statistics_rx_phy {
+	__le32 ina_cnt;
+	__le32 fina_cnt;
+	__le32 plcp_err;
+	__le32 crc32_err;
+	__le32 overrun_err;
+	__le32 early_overrun_err;
+	__le32 crc32_good;
+	__le32 false_alarm_cnt;
+	__le32 fina_sync_err_cnt;
+	__le32 sfd_timeout;
+	__le32 fina_timeout;
+	__le32 unresponded_rts;
+	__le32 rxe_frame_limit_overrun;
+	__le32 sent_ack_cnt;
+	__le32 sent_cts_cnt;
+	__le32 sent_ba_rsp_cnt;
+	__le32 dsp_self_kill;
+	__le32 mh_format_err;
+	__le32 re_acq_main_rssi_sum;
+	__le32 reserved3;
+} __packed;
+
+struct statistics_rx_ht_phy {
+	__le32 plcp_err;
+	__le32 overrun_err;
+	__le32 early_overrun_err;
+	__le32 crc32_good;
+	__le32 crc32_err;
+	__le32 mh_format_err;
+	__le32 agg_crc32_good;
+	__le32 agg_mpdu_cnt;
+	__le32 agg_cnt;
+	__le32 unsupport_mcs;
+} __packed;
+
+#define INTERFERENCE_DATA_AVAILABLE      cpu_to_le32(1)
+
+struct statistics_rx_non_phy {
+	__le32 bogus_cts;	/* CTS received when not expecting CTS */
+	__le32 bogus_ack;	/* ACK received when not expecting ACK */
+	__le32 non_bssid_frames;	/* number of frames with BSSID that
+					 * doesn't belong to the STA BSSID */
+	__le32 filtered_frames;	/* count frames that were dumped in the
+				 * filtering process */
+	__le32 non_channel_beacons;	/* beacons with our bss id but not on
+					 * our serving channel */
+	__le32 channel_beacons;	/* beacons with our bss id and in our
+				 * serving channel */
+	__le32 num_missed_bcon;	/* number of missed beacons */
+	__le32 adc_rx_saturation_time;	/* count in 0.8us units the time the
+					 * ADC was in saturation */
+	__le32 ina_detection_search_time;/* total time (in 0.8us) searched
+					  * for INA */
+	__le32 beacon_silence_rssi_a;	/* RSSI silence after beacon frame */
+	__le32 beacon_silence_rssi_b;	/* RSSI silence after beacon frame */
+	__le32 beacon_silence_rssi_c;	/* RSSI silence after beacon frame */
+	__le32 interference_data_flag;	/* flag for interference data
+					 * availability. 1 when data is
+					 * available. */
+	__le32 channel_load;		/* counts RX Enable time in uSec */
+	__le32 dsp_false_alarms;	/* DSP false alarm (both OFDM
+					 * and CCK) counter */
+	__le32 beacon_rssi_a;
+	__le32 beacon_rssi_b;
+	__le32 beacon_rssi_c;
+	__le32 beacon_energy_a;
+	__le32 beacon_energy_b;
+	__le32 beacon_energy_c;
+} __packed;
+
+struct statistics_rx_non_phy_bt {
+	struct statistics_rx_non_phy common;
+	/* additional stats for bt */
+	__le32 num_bt_kills;
+	__le32 reserved[2];
+} __packed;
+
+struct statistics_rx {
+	struct statistics_rx_phy ofdm;
+	struct statistics_rx_phy cck;
+	struct statistics_rx_non_phy general;
+	struct statistics_rx_ht_phy ofdm_ht;
+} __packed;
+
+struct statistics_rx_bt {
+	struct statistics_rx_phy ofdm;
+	struct statistics_rx_phy cck;
+	struct statistics_rx_non_phy_bt general;
+	struct statistics_rx_ht_phy ofdm_ht;
+} __packed;
+
+/**
+ * struct statistics_tx_power - current tx power
+ *
+ * @ant_a: current tx power on chain a in 1/2 dB step
+ * @ant_b: current tx power on chain b in 1/2 dB step
+ * @ant_c: current tx power on chain c in 1/2 dB step
+ */
+struct statistics_tx_power {
+	u8 ant_a;
+	u8 ant_b;
+	u8 ant_c;
+	u8 reserved;
+} __packed;
+
+struct statistics_tx_non_phy_agg {
+	__le32 ba_timeout;
+	__le32 ba_reschedule_frames;
+	__le32 scd_query_agg_frame_cnt;
+	__le32 scd_query_no_agg;
+	__le32 scd_query_agg;
+	__le32 scd_query_mismatch;
+	__le32 frame_not_ready;
+	__le32 underrun;
+	__le32 bt_prio_kill;
+	__le32 rx_ba_rsp_cnt;
+} __packed;
+
+struct statistics_tx {
+	__le32 preamble_cnt;
+	__le32 rx_detected_cnt;
+	__le32 bt_prio_defer_cnt;
+	__le32 bt_prio_kill_cnt;
+	__le32 few_bytes_cnt;
+	__le32 cts_timeout;
+	__le32 ack_timeout;
+	__le32 expected_ack_cnt;
+	__le32 actual_ack_cnt;
+	__le32 dump_msdu_cnt;
+	__le32 burst_abort_next_frame_mismatch_cnt;
+	__le32 burst_abort_missing_next_frame_cnt;
+	__le32 cts_timeout_collision;
+	__le32 ack_or_ba_timeout_collision;
+	struct statistics_tx_non_phy_agg agg;
+	/*
+	 * "tx_power" are optional parameters provided by uCode,
+	 * 6000 series is the only device provide the information,
+	 * Those are reserved fields for all the other devices
+	 */
+	struct statistics_tx_power tx_power;
+	__le32 reserved1;
+} __packed;
+
+
+struct statistics_div {
+	__le32 tx_on_a;
+	__le32 tx_on_b;
+	__le32 exec_time;
+	__le32 probe_time;
+	__le32 reserved1;
+	__le32 reserved2;
+} __packed;
+
+struct statistics_general_common {
+	__le32 temperature;   /* radio temperature */
+	__le32 temperature_m; /* radio voltage */
+	struct statistics_dbg dbg;
+	__le32 sleep_time;
+	__le32 slots_out;
+	__le32 slots_idle;
+	__le32 ttl_timestamp;
+	struct statistics_div div;
+	__le32 rx_enable_counter;
+	/*
+	 * num_of_sos_states:
+	 *  count the number of times we have to re-tune
+	 *  in order to get out of bad PHY status
+	 */
+	__le32 num_of_sos_states;
+} __packed;
+
+struct statistics_bt_activity {
+	/* Tx statistics */
+	__le32 hi_priority_tx_req_cnt;
+	__le32 hi_priority_tx_denied_cnt;
+	__le32 lo_priority_tx_req_cnt;
+	__le32 lo_priority_tx_denied_cnt;
+	/* Rx statistics */
+	__le32 hi_priority_rx_req_cnt;
+	__le32 hi_priority_rx_denied_cnt;
+	__le32 lo_priority_rx_req_cnt;
+	__le32 lo_priority_rx_denied_cnt;
+} __packed;
+
+struct statistics_general {
+	struct statistics_general_common common;
+	__le32 reserved2;
+	__le32 reserved3;
+} __packed;
+
+struct statistics_general_bt {
+	struct statistics_general_common common;
+	struct statistics_bt_activity activity;
+	__le32 reserved2;
+	__le32 reserved3;
+} __packed;
+
+#define UCODE_STATISTICS_CLEAR_MSK		(0x1 << 0)
+#define UCODE_STATISTICS_FREQUENCY_MSK		(0x1 << 1)
+#define UCODE_STATISTICS_NARROW_BAND_MSK	(0x1 << 2)
+
+/*
+ * REPLY_STATISTICS_CMD = 0x9c,
+ * all devices identical.
+ *
+ * This command triggers an immediate response containing uCode statistics.
+ * The response is in the same format as STATISTICS_NOTIFICATION 0x9d, below.
+ *
+ * If the CLEAR_STATS configuration flag is set, uCode will clear its
+ * internal copy of the statistics (counters) after issuing the response.
+ * This flag does not affect STATISTICS_NOTIFICATIONs after beacons (see below).
+ *
+ * If the DISABLE_NOTIF configuration flag is set, uCode will not issue
+ * STATISTICS_NOTIFICATIONs after received beacons (see below).  This flag
+ * does not affect the response to the REPLY_STATISTICS_CMD 0x9c itself.
+ */
+#define IWL_STATS_CONF_CLEAR_STATS cpu_to_le32(0x1)	/* see above */
+#define IWL_STATS_CONF_DISABLE_NOTIF cpu_to_le32(0x2)/* see above */
+struct iwl_statistics_cmd {
+	__le32 configuration_flags;	/* IWL_STATS_CONF_* */
+} __packed;
+
+/*
+ * STATISTICS_NOTIFICATION = 0x9d (notification only, not a command)
+ *
+ * By default, uCode issues this notification after receiving a beacon
+ * while associated.  To disable this behavior, set DISABLE_NOTIF flag in the
+ * REPLY_STATISTICS_CMD 0x9c, above.
+ *
+ * Statistics counters continue to increment beacon after beacon, but are
+ * cleared when changing channels or when driver issues REPLY_STATISTICS_CMD
+ * 0x9c with CLEAR_STATS bit set (see above).
+ *
+ * uCode also issues this notification during scans.  uCode clears statistics
+ * appropriately so that each notification contains statistics for only the
+ * one channel that has just been scanned.
+ */
+#define STATISTICS_REPLY_FLG_BAND_24G_MSK         cpu_to_le32(0x2)
+#define STATISTICS_REPLY_FLG_HT40_MODE_MSK        cpu_to_le32(0x8)
+
+struct iwl_notif_statistics {
+	__le32 flag;
+	struct statistics_rx rx;
+	struct statistics_tx tx;
+	struct statistics_general general;
+} __packed;
+
+struct iwl_bt_notif_statistics {
+	__le32 flag;
+	struct statistics_rx_bt rx;
+	struct statistics_tx tx;
+	struct statistics_general_bt general;
+} __packed;
+
+/*
+ * MISSED_BEACONS_NOTIFICATION = 0xa2 (notification only, not a command)
+ *
+ * uCode send MISSED_BEACONS_NOTIFICATION to driver when detect beacon missed
+ * in regardless of how many missed beacons, which mean when driver receive the
+ * notification, inside the command, it can find all the beacons information
+ * which include number of total missed beacons, number of consecutive missed
+ * beacons, number of beacons received and number of beacons expected to
+ * receive.
+ *
+ * If uCode detected consecutive_missed_beacons > 5, it will reset the radio
+ * in order to bring the radio/PHY back to working state; which has no relation
+ * to when driver will perform sensitivity calibration.
+ *
+ * Driver should set it own missed_beacon_threshold to decide when to perform
+ * sensitivity calibration based on number of consecutive missed beacons in
+ * order to improve overall performance, especially in noisy environment.
+ *
+ */
+
+#define IWL_MISSED_BEACON_THRESHOLD_MIN	(1)
+#define IWL_MISSED_BEACON_THRESHOLD_DEF	(5)
+#define IWL_MISSED_BEACON_THRESHOLD_MAX	IWL_MISSED_BEACON_THRESHOLD_DEF
+
+struct iwl_missed_beacon_notif {
+	__le32 consecutive_missed_beacons;
+	__le32 total_missed_becons;
+	__le32 num_expected_beacons;
+	__le32 num_recvd_beacons;
+} __packed;
+
+
+/******************************************************************************
+ * (11)
+ * Rx Calibration Commands:
+ *
+ * With the uCode used for open source drivers, most Tx calibration (except
+ * for Tx Power) and most Rx calibration is done by uCode during the
+ * "initialize" phase of uCode boot.  Driver must calibrate only:
+ *
+ * 1)  Tx power (depends on temperature), described elsewhere
+ * 2)  Receiver gain balance (optimize MIMO, and detect disconnected antennas)
+ * 3)  Receiver sensitivity (to optimize signal detection)
+ *
+ *****************************************************************************/
+
+/**
+ * SENSITIVITY_CMD = 0xa8 (command, has simple generic response)
+ *
+ * This command sets up the Rx signal detector for a sensitivity level that
+ * is high enough to lock onto all signals within the associated network,
+ * but low enough to ignore signals that are below a certain threshold, so as
+ * not to have too many "false alarms".  False alarms are signals that the
+ * Rx DSP tries to lock onto, but then discards after determining that they
+ * are noise.
+ *
+ * The optimum number of false alarms is between 5 and 50 per 200 TUs
+ * (200 * 1024 uSecs, i.e. 204.8 milliseconds) of actual Rx time (i.e.
+ * time listening, not transmitting).  Driver must adjust sensitivity so that
+ * the ratio of actual false alarms to actual Rx time falls within this range.
+ *
+ * While associated, uCode delivers STATISTICS_NOTIFICATIONs after each
+ * received beacon.  These provide information to the driver to analyze the
+ * sensitivity.  Don't analyze statistics that come in from scanning, or any
+ * other non-associated-network source.  Pertinent statistics include:
+ *
+ * From "general" statistics (struct statistics_rx_non_phy):
+ *
+ * (beacon_energy_[abc] & 0x0FF00) >> 8 (unsigned, higher value is lower level)
+ *   Measure of energy of desired signal.  Used for establishing a level
+ *   below which the device does not detect signals.
+ *
+ * (beacon_silence_rssi_[abc] & 0x0FF00) >> 8 (unsigned, units in dB)
+ *   Measure of background noise in silent period after beacon.
+ *
+ * channel_load
+ *   uSecs of actual Rx time during beacon period (varies according to
+ *   how much time was spent transmitting).
+ *
+ * From "cck" and "ofdm" statistics (struct statistics_rx_phy), separately:
+ *
+ * false_alarm_cnt
+ *   Signal locks abandoned early (before phy-level header).
+ *
+ * plcp_err
+ *   Signal locks abandoned late (during phy-level header).
+ *
+ * NOTE:  Both false_alarm_cnt and plcp_err increment monotonically from
+ *        beacon to beacon, i.e. each value is an accumulation of all errors
+ *        before and including the latest beacon.  Values will wrap around to 0
+ *        after counting up to 2^32 - 1.  Driver must differentiate vs.
+ *        previous beacon's values to determine # false alarms in the current
+ *        beacon period.
+ *
+ * Total number of false alarms = false_alarms + plcp_errs
+ *
+ * For OFDM, adjust the following table entries in struct iwl_sensitivity_cmd
+ * (notice that the start points for OFDM are at or close to settings for
+ * maximum sensitivity):
+ *
+ *                                             START  /  MIN  /  MAX
+ *   HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX          90   /   85  /  120
+ *   HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX     170   /  170  /  210
+ *   HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX         105   /  105  /  140
+ *   HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX     220   /  220  /  270
+ *
+ *   If actual rate of OFDM false alarms (+ plcp_errors) is too high
+ *   (greater than 50 for each 204.8 msecs listening), reduce sensitivity
+ *   by *adding* 1 to all 4 of the table entries above, up to the max for
+ *   each entry.  Conversely, if false alarm rate is too low (less than 5
+ *   for each 204.8 msecs listening), *subtract* 1 from each entry to
+ *   increase sensitivity.
+ *
+ * For CCK sensitivity, keep track of the following:
+ *
+ *   1).  20-beacon history of maximum background noise, indicated by
+ *        (beacon_silence_rssi_[abc] & 0x0FF00), units in dB, across the
+ *        3 receivers.  For any given beacon, the "silence reference" is
+ *        the maximum of last 60 samples (20 beacons * 3 receivers).
+ *
+ *   2).  10-beacon history of strongest signal level, as indicated
+ *        by (beacon_energy_[abc] & 0x0FF00) >> 8, across the 3 receivers,
+ *        i.e. the strength of the signal through the best receiver at the
+ *        moment.  These measurements are "upside down", with lower values
+ *        for stronger signals, so max energy will be *minimum* value.
+ *
+ *        Then for any given beacon, the driver must determine the *weakest*
+ *        of the strongest signals; this is the minimum level that needs to be
+ *        successfully detected, when using the best receiver at the moment.
+ *        "Max cck energy" is the maximum (higher value means lower energy!)
+ *        of the last 10 minima.  Once this is determined, driver must add
+ *        a little margin by adding "6" to it.
+ *
+ *   3).  Number of consecutive beacon periods with too few false alarms.
+ *        Reset this to 0 at the first beacon period that falls within the
+ *        "good" range (5 to 50 false alarms per 204.8 milliseconds rx).
+ *
+ * Then, adjust the following CCK table entries in struct iwl_sensitivity_cmd
+ * (notice that the start points for CCK are at maximum sensitivity):
+ *
+ *                                             START  /  MIN  /  MAX
+ *   HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX         125   /  125  /  200
+ *   HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX     200   /  200  /  400
+ *   HD_MIN_ENERGY_CCK_DET_INDEX                100   /    0  /  100
+ *
+ *   If actual rate of CCK false alarms (+ plcp_errors) is too high
+ *   (greater than 50 for each 204.8 msecs listening), method for reducing
+ *   sensitivity is:
+ *
+ *   1)  *Add* 3 to value in HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX,
+ *       up to max 400.
+ *
+ *   2)  If current value in HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX is < 160,
+ *       sensitivity has been reduced a significant amount; bring it up to
+ *       a moderate 161.  Otherwise, *add* 3, up to max 200.
+ *
+ *   3)  a)  If current value in HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX is > 160,
+ *       sensitivity has been reduced only a moderate or small amount;
+ *       *subtract* 2 from value in HD_MIN_ENERGY_CCK_DET_INDEX,
+ *       down to min 0.  Otherwise (if gain has been significantly reduced),
+ *       don't change the HD_MIN_ENERGY_CCK_DET_INDEX value.
+ *
+ *       b)  Save a snapshot of the "silence reference".
+ *
+ *   If actual rate of CCK false alarms (+ plcp_errors) is too low
+ *   (less than 5 for each 204.8 msecs listening), method for increasing
+ *   sensitivity is used only if:
+ *
+ *   1a)  Previous beacon did not have too many false alarms
+ *   1b)  AND difference between previous "silence reference" and current
+ *        "silence reference" (prev - current) is 2 or more,
+ *   OR 2)  100 or more consecutive beacon periods have had rate of
+ *          less than 5 false alarms per 204.8 milliseconds rx time.
+ *
+ *   Method for increasing sensitivity:
+ *
+ *   1)  *Subtract* 3 from value in HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX,
+ *       down to min 125.
+ *
+ *   2)  *Subtract* 3 from value in HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX,
+ *       down to min 200.
+ *
+ *   3)  *Add* 2 to value in HD_MIN_ENERGY_CCK_DET_INDEX, up to max 100.
+ *
+ *   If actual rate of CCK false alarms (+ plcp_errors) is within good range
+ *   (between 5 and 50 for each 204.8 msecs listening):
+ *
+ *   1)  Save a snapshot of the silence reference.
+ *
+ *   2)  If previous beacon had too many CCK false alarms (+ plcp_errors),
+ *       give some extra margin to energy threshold by *subtracting* 8
+ *       from value in HD_MIN_ENERGY_CCK_DET_INDEX.
+ *
+ *   For all cases (too few, too many, good range), make sure that the CCK
+ *   detection threshold (energy) is below the energy level for robust
+ *   detection over the past 10 beacon periods, the "Max cck energy".
+ *   Lower values mean higher energy; this means making sure that the value
+ *   in HD_MIN_ENERGY_CCK_DET_INDEX is at or *above* "Max cck energy".
+ *
+ */
+
+/*
+ * Table entries in SENSITIVITY_CMD (struct iwl_sensitivity_cmd)
+ */
+#define HD_TABLE_SIZE  (11)	/* number of entries */
+#define HD_MIN_ENERGY_CCK_DET_INDEX                 (0)	/* table indexes */
+#define HD_MIN_ENERGY_OFDM_DET_INDEX                (1)
+#define HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX          (2)
+#define HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX      (3)
+#define HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX      (4)
+#define HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX          (5)
+#define HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX      (6)
+#define HD_BARKER_CORR_TH_ADD_MIN_INDEX             (7)
+#define HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX         (8)
+#define HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX          (9)
+#define HD_OFDM_ENERGY_TH_IN_INDEX                  (10)
+
+/*
+ * Additional table entries in enhance SENSITIVITY_CMD
+ */
+#define HD_INA_NON_SQUARE_DET_OFDM_INDEX		(11)
+#define HD_INA_NON_SQUARE_DET_CCK_INDEX			(12)
+#define HD_CORR_11_INSTEAD_OF_CORR_9_EN_INDEX		(13)
+#define HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_INDEX		(14)
+#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_INDEX	(15)
+#define HD_OFDM_NON_SQUARE_DET_SLOPE_INDEX		(16)
+#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_INDEX		(17)
+#define HD_CCK_NON_SQUARE_DET_SLOPE_MRC_INDEX		(18)
+#define HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_INDEX	(19)
+#define HD_CCK_NON_SQUARE_DET_SLOPE_INDEX		(20)
+#define HD_CCK_NON_SQUARE_DET_INTERCEPT_INDEX		(21)
+#define HD_RESERVED					(22)
+
+/* number of entries for enhanced tbl */
+#define ENHANCE_HD_TABLE_SIZE  (23)
+
+/* number of additional entries for enhanced tbl */
+#define ENHANCE_HD_TABLE_ENTRIES  (ENHANCE_HD_TABLE_SIZE - HD_TABLE_SIZE)
+
+#define HD_INA_NON_SQUARE_DET_OFDM_DATA_V1		cpu_to_le16(0)
+#define HD_INA_NON_SQUARE_DET_CCK_DATA_V1		cpu_to_le16(0)
+#define HD_CORR_11_INSTEAD_OF_CORR_9_EN_DATA_V1		cpu_to_le16(0)
+#define HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_DATA_V1	cpu_to_le16(668)
+#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V1	cpu_to_le16(4)
+#define HD_OFDM_NON_SQUARE_DET_SLOPE_DATA_V1		cpu_to_le16(486)
+#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_DATA_V1	cpu_to_le16(37)
+#define HD_CCK_NON_SQUARE_DET_SLOPE_MRC_DATA_V1		cpu_to_le16(853)
+#define HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V1	cpu_to_le16(4)
+#define HD_CCK_NON_SQUARE_DET_SLOPE_DATA_V1		cpu_to_le16(476)
+#define HD_CCK_NON_SQUARE_DET_INTERCEPT_DATA_V1		cpu_to_le16(99)
+
+#define HD_INA_NON_SQUARE_DET_OFDM_DATA_V2		cpu_to_le16(1)
+#define HD_INA_NON_SQUARE_DET_CCK_DATA_V2		cpu_to_le16(1)
+#define HD_CORR_11_INSTEAD_OF_CORR_9_EN_DATA_V2		cpu_to_le16(1)
+#define HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_DATA_V2	cpu_to_le16(600)
+#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V2	cpu_to_le16(40)
+#define HD_OFDM_NON_SQUARE_DET_SLOPE_DATA_V2		cpu_to_le16(486)
+#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_DATA_V2	cpu_to_le16(45)
+#define HD_CCK_NON_SQUARE_DET_SLOPE_MRC_DATA_V2		cpu_to_le16(853)
+#define HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_DATA_V2	cpu_to_le16(60)
+#define HD_CCK_NON_SQUARE_DET_SLOPE_DATA_V2		cpu_to_le16(476)
+#define HD_CCK_NON_SQUARE_DET_INTERCEPT_DATA_V2		cpu_to_le16(99)
+
+
+/* Control field in struct iwl_sensitivity_cmd */
+#define SENSITIVITY_CMD_CONTROL_DEFAULT_TABLE	cpu_to_le16(0)
+#define SENSITIVITY_CMD_CONTROL_WORK_TABLE	cpu_to_le16(1)
+
+/**
+ * struct iwl_sensitivity_cmd
+ * @control:  (1) updates working table, (0) updates default table
+ * @table:  energy threshold values, use HD_* as index into table
+ *
+ * Always use "1" in "control" to update uCode's working table and DSP.
+ */
+struct iwl_sensitivity_cmd {
+	__le16 control;			/* always use "1" */
+	__le16 table[HD_TABLE_SIZE];	/* use HD_* as index */
+} __packed;
+
+/*
+ *
+ */
+struct iwl_enhance_sensitivity_cmd {
+	__le16 control;			/* always use "1" */
+	__le16 enhance_table[ENHANCE_HD_TABLE_SIZE];	/* use HD_* as index */
+} __packed;
+
+
+/**
+ * REPLY_PHY_CALIBRATION_CMD = 0xb0 (command, has simple generic response)
+ *
+ * This command sets the relative gains of agn device's 3 radio receiver chains.
+ *
+ * After the first association, driver should accumulate signal and noise
+ * statistics from the STATISTICS_NOTIFICATIONs that follow the first 20
+ * beacons from the associated network (don't collect statistics that come
+ * in from scanning, or any other non-network source).
+ *
+ * DISCONNECTED ANTENNA:
+ *
+ * Driver should determine which antennas are actually connected, by comparing
+ * average beacon signal levels for the 3 Rx chains.  Accumulate (add) the
+ * following values over 20 beacons, one accumulator for each of the chains
+ * a/b/c, from struct statistics_rx_non_phy:
+ *
+ * beacon_rssi_[abc] & 0x0FF (unsigned, units in dB)
+ *
+ * Find the strongest signal from among a/b/c.  Compare the other two to the
+ * strongest.  If any signal is more than 15 dB (times 20, unless you
+ * divide the accumulated values by 20) below the strongest, the driver
+ * considers that antenna to be disconnected, and should not try to use that
+ * antenna/chain for Rx or Tx.  If both A and B seem to be disconnected,
+ * driver should declare the stronger one as connected, and attempt to use it
+ * (A and B are the only 2 Tx chains!).
+ *
+ *
+ * RX BALANCE:
+ *
+ * Driver should balance the 3 receivers (but just the ones that are connected
+ * to antennas, see above) for gain, by comparing the average signal levels
+ * detected during the silence after each beacon (background noise).
+ * Accumulate (add) the following values over 20 beacons, one accumulator for
+ * each of the chains a/b/c, from struct statistics_rx_non_phy:
+ *
+ * beacon_silence_rssi_[abc] & 0x0FF (unsigned, units in dB)
+ *
+ * Find the weakest background noise level from among a/b/c.  This Rx chain
+ * will be the reference, with 0 gain adjustment.  Attenuate other channels by
+ * finding noise difference:
+ *
+ * (accum_noise[i] - accum_noise[reference]) / 30
+ *
+ * The "30" adjusts the dB in the 20 accumulated samples to units of 1.5 dB.
+ * For use in diff_gain_[abc] fields of struct iwl_calibration_cmd, the
+ * driver should limit the difference results to a range of 0-3 (0-4.5 dB),
+ * and set bit 2 to indicate "reduce gain".  The value for the reference
+ * (weakest) chain should be "0".
+ *
+ * diff_gain_[abc] bit fields:
+ *   2: (1) reduce gain, (0) increase gain
+ * 1-0: amount of gain, units of 1.5 dB
+ */
+
+/* Phy calibration command for series */
+enum {
+	IWL_PHY_CALIBRATE_DC_CMD		= 8,
+	IWL_PHY_CALIBRATE_LO_CMD		= 9,
+	IWL_PHY_CALIBRATE_TX_IQ_CMD		= 11,
+	IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD	= 15,
+	IWL_PHY_CALIBRATE_BASE_BAND_CMD		= 16,
+	IWL_PHY_CALIBRATE_TX_IQ_PERD_CMD	= 17,
+	IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD	= 18,
+};
+
+/* This enum defines the bitmap of various calibrations to enable in both
+ * init ucode and runtime ucode through CALIBRATION_CFG_CMD.
+ */
+enum iwl_ucode_calib_cfg {
+	IWL_CALIB_CFG_RX_BB_IDX			= BIT(0),
+	IWL_CALIB_CFG_DC_IDX			= BIT(1),
+	IWL_CALIB_CFG_LO_IDX			= BIT(2),
+	IWL_CALIB_CFG_TX_IQ_IDX			= BIT(3),
+	IWL_CALIB_CFG_RX_IQ_IDX			= BIT(4),
+	IWL_CALIB_CFG_NOISE_IDX			= BIT(5),
+	IWL_CALIB_CFG_CRYSTAL_IDX		= BIT(6),
+	IWL_CALIB_CFG_TEMPERATURE_IDX		= BIT(7),
+	IWL_CALIB_CFG_PAPD_IDX			= BIT(8),
+	IWL_CALIB_CFG_SENSITIVITY_IDX		= BIT(9),
+	IWL_CALIB_CFG_TX_PWR_IDX		= BIT(10),
+};
+
+#define IWL_CALIB_INIT_CFG_ALL	cpu_to_le32(IWL_CALIB_CFG_RX_BB_IDX |	\
+					IWL_CALIB_CFG_DC_IDX |		\
+					IWL_CALIB_CFG_LO_IDX |		\
+					IWL_CALIB_CFG_TX_IQ_IDX |	\
+					IWL_CALIB_CFG_RX_IQ_IDX |	\
+					IWL_CALIB_CFG_CRYSTAL_IDX)
+
+#define IWL_CALIB_RT_CFG_ALL	cpu_to_le32(IWL_CALIB_CFG_RX_BB_IDX |	\
+					IWL_CALIB_CFG_DC_IDX |		\
+					IWL_CALIB_CFG_LO_IDX |		\
+					IWL_CALIB_CFG_TX_IQ_IDX |	\
+					IWL_CALIB_CFG_RX_IQ_IDX |	\
+					IWL_CALIB_CFG_TEMPERATURE_IDX |	\
+					IWL_CALIB_CFG_PAPD_IDX |	\
+					IWL_CALIB_CFG_TX_PWR_IDX |	\
+					IWL_CALIB_CFG_CRYSTAL_IDX)
+
+#define IWL_CALIB_CFG_FLAG_SEND_COMPLETE_NTFY_MSK	cpu_to_le32(BIT(0))
+
+struct iwl_calib_cfg_elmnt_s {
+	__le32 is_enable;
+	__le32 start;
+	__le32 send_res;
+	__le32 apply_res;
+	__le32 reserved;
+} __packed;
+
+struct iwl_calib_cfg_status_s {
+	struct iwl_calib_cfg_elmnt_s once;
+	struct iwl_calib_cfg_elmnt_s perd;
+	__le32 flags;
+} __packed;
+
+struct iwl_calib_cfg_cmd {
+	struct iwl_calib_cfg_status_s ucd_calib_cfg;
+	struct iwl_calib_cfg_status_s drv_calib_cfg;
+	__le32 reserved1;
+} __packed;
+
+struct iwl_calib_hdr {
+	u8 op_code;
+	u8 first_group;
+	u8 groups_num;
+	u8 data_valid;
+} __packed;
+
+struct iwl_calib_cmd {
+	struct iwl_calib_hdr hdr;
+	u8 data[0];
+} __packed;
+
+struct iwl_calib_xtal_freq_cmd {
+	struct iwl_calib_hdr hdr;
+	u8 cap_pin1;
+	u8 cap_pin2;
+	u8 pad[2];
+} __packed;
+
+#define DEFAULT_RADIO_SENSOR_OFFSET    cpu_to_le16(2700)
+struct iwl_calib_temperature_offset_cmd {
+	struct iwl_calib_hdr hdr;
+	__le16 radio_sensor_offset;
+	__le16 reserved;
+} __packed;
+
+struct iwl_calib_temperature_offset_v2_cmd {
+	struct iwl_calib_hdr hdr;
+	__le16 radio_sensor_offset_high;
+	__le16 radio_sensor_offset_low;
+	__le16 burntVoltageRef;
+	__le16 reserved;
+} __packed;
+
+/* IWL_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD */
+struct iwl_calib_chain_noise_reset_cmd {
+	struct iwl_calib_hdr hdr;
+	u8 data[0];
+};
+
+/* IWL_PHY_CALIBRATE_CHAIN_NOISE_GAIN_CMD */
+struct iwl_calib_chain_noise_gain_cmd {
+	struct iwl_calib_hdr hdr;
+	u8 delta_gain_1;
+	u8 delta_gain_2;
+	u8 pad[2];
+} __packed;
+
+/******************************************************************************
+ * (12)
+ * Miscellaneous Commands:
+ *
+ *****************************************************************************/
+
+/*
+ * LEDs Command & Response
+ * REPLY_LEDS_CMD = 0x48 (command, has simple generic response)
+ *
+ * For each of 3 possible LEDs (Activity/Link/Tech, selected by "id" field),
+ * this command turns it on or off, or sets up a periodic blinking cycle.
+ */
+struct iwl_led_cmd {
+	__le32 interval;	/* "interval" in uSec */
+	u8 id;			/* 1: Activity, 2: Link, 3: Tech */
+	u8 off;			/* # intervals off while blinking;
+				 * "0", with >0 "on" value, turns LED on */
+	u8 on;			/* # intervals on while blinking;
+				 * "0", regardless of "off", turns LED off */
+	u8 reserved;
+} __packed;
+
+/*
+ * station priority table entries
+ * also used as potential "events" value for both
+ * COEX_MEDIUM_NOTIFICATION and COEX_EVENT_CMD
+ */
+
+/*
+ * COEX events entry flag masks
+ * RP - Requested Priority
+ * WP - Win Medium Priority: priority assigned when the contention has been won
+ */
+#define COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG        (0x1)
+#define COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG        (0x2)
+#define COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG  (0x4)
+
+#define COEX_CU_UNASSOC_IDLE_RP               4
+#define COEX_CU_UNASSOC_MANUAL_SCAN_RP        4
+#define COEX_CU_UNASSOC_AUTO_SCAN_RP          4
+#define COEX_CU_CALIBRATION_RP                4
+#define COEX_CU_PERIODIC_CALIBRATION_RP       4
+#define COEX_CU_CONNECTION_ESTAB_RP           4
+#define COEX_CU_ASSOCIATED_IDLE_RP            4
+#define COEX_CU_ASSOC_MANUAL_SCAN_RP          4
+#define COEX_CU_ASSOC_AUTO_SCAN_RP            4
+#define COEX_CU_ASSOC_ACTIVE_LEVEL_RP         4
+#define COEX_CU_RF_ON_RP                      6
+#define COEX_CU_RF_OFF_RP                     4
+#define COEX_CU_STAND_ALONE_DEBUG_RP          6
+#define COEX_CU_IPAN_ASSOC_LEVEL_RP           4
+#define COEX_CU_RSRVD1_RP                     4
+#define COEX_CU_RSRVD2_RP                     4
+
+#define COEX_CU_UNASSOC_IDLE_WP               3
+#define COEX_CU_UNASSOC_MANUAL_SCAN_WP        3
+#define COEX_CU_UNASSOC_AUTO_SCAN_WP          3
+#define COEX_CU_CALIBRATION_WP                3
+#define COEX_CU_PERIODIC_CALIBRATION_WP       3
+#define COEX_CU_CONNECTION_ESTAB_WP           3
+#define COEX_CU_ASSOCIATED_IDLE_WP            3
+#define COEX_CU_ASSOC_MANUAL_SCAN_WP          3
+#define COEX_CU_ASSOC_AUTO_SCAN_WP            3
+#define COEX_CU_ASSOC_ACTIVE_LEVEL_WP         3
+#define COEX_CU_RF_ON_WP                      3
+#define COEX_CU_RF_OFF_WP                     3
+#define COEX_CU_STAND_ALONE_DEBUG_WP          6
+#define COEX_CU_IPAN_ASSOC_LEVEL_WP           3
+#define COEX_CU_RSRVD1_WP                     3
+#define COEX_CU_RSRVD2_WP                     3
+
+#define COEX_UNASSOC_IDLE_FLAGS                     0
+#define COEX_UNASSOC_MANUAL_SCAN_FLAGS		\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_UNASSOC_AUTO_SCAN_FLAGS		\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_CALIBRATION_FLAGS			\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_PERIODIC_CALIBRATION_FLAGS             0
+/*
+ * COEX_CONNECTION_ESTAB:
+ * we need DELAY_MEDIUM_FREE_NTFY to let WiMAX disconnect from network.
+ */
+#define COEX_CONNECTION_ESTAB_FLAGS		\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG |	\
+	COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG)
+#define COEX_ASSOCIATED_IDLE_FLAGS                  0
+#define COEX_ASSOC_MANUAL_SCAN_FLAGS		\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_ASSOC_AUTO_SCAN_FLAGS		\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_ASSOC_ACTIVE_LEVEL_FLAGS               0
+#define COEX_RF_ON_FLAGS                            0
+#define COEX_RF_OFF_FLAGS                           0
+#define COEX_STAND_ALONE_DEBUG_FLAGS		\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_IPAN_ASSOC_LEVEL_FLAGS		\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG |	\
+	 COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG)
+#define COEX_RSRVD1_FLAGS                           0
+#define COEX_RSRVD2_FLAGS                           0
+/*
+ * COEX_CU_RF_ON is the event wrapping all radio ownership.
+ * We need DELAY_MEDIUM_FREE_NTFY to let WiMAX disconnect from network.
+ */
+#define COEX_CU_RF_ON_FLAGS			\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG |	\
+	 COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG)
+
+
+enum {
+	/* un-association part */
+	COEX_UNASSOC_IDLE		= 0,
+	COEX_UNASSOC_MANUAL_SCAN	= 1,
+	COEX_UNASSOC_AUTO_SCAN		= 2,
+	/* calibration */
+	COEX_CALIBRATION		= 3,
+	COEX_PERIODIC_CALIBRATION	= 4,
+	/* connection */
+	COEX_CONNECTION_ESTAB		= 5,
+	/* association part */
+	COEX_ASSOCIATED_IDLE		= 6,
+	COEX_ASSOC_MANUAL_SCAN		= 7,
+	COEX_ASSOC_AUTO_SCAN		= 8,
+	COEX_ASSOC_ACTIVE_LEVEL		= 9,
+	/* RF ON/OFF */
+	COEX_RF_ON			= 10,
+	COEX_RF_OFF			= 11,
+	COEX_STAND_ALONE_DEBUG		= 12,
+	/* IPAN */
+	COEX_IPAN_ASSOC_LEVEL		= 13,
+	/* reserved */
+	COEX_RSRVD1			= 14,
+	COEX_RSRVD2			= 15,
+	COEX_NUM_OF_EVENTS		= 16
+};
+
+/*
+ * Coexistence WIFI/WIMAX  Command
+ * COEX_PRIORITY_TABLE_CMD = 0x5a
+ *
+ */
+struct iwl_wimax_coex_event_entry {
+	u8 request_prio;
+	u8 win_medium_prio;
+	u8 reserved;
+	u8 flags;
+} __packed;
+
+/* COEX flag masks */
+
+/* Station table is valid */
+#define COEX_FLAGS_STA_TABLE_VALID_MSK      (0x1)
+/* UnMask wake up src at unassociated sleep */
+#define COEX_FLAGS_UNASSOC_WA_UNMASK_MSK    (0x4)
+/* UnMask wake up src at associated sleep */
+#define COEX_FLAGS_ASSOC_WA_UNMASK_MSK      (0x8)
+/* Enable CoEx feature. */
+#define COEX_FLAGS_COEX_ENABLE_MSK          (0x80)
+
+struct iwl_wimax_coex_cmd {
+	u8 flags;
+	u8 reserved[3];
+	struct iwl_wimax_coex_event_entry sta_prio[COEX_NUM_OF_EVENTS];
+} __packed;
+
+/*
+ * Coexistence MEDIUM NOTIFICATION
+ * COEX_MEDIUM_NOTIFICATION = 0x5b
+ *
+ * notification from uCode to host to indicate medium changes
+ *
+ */
+/*
+ * status field
+ * bit 0 - 2: medium status
+ * bit 3: medium change indication
+ * bit 4 - 31: reserved
+ */
+/* status option values, (0 - 2 bits) */
+#define COEX_MEDIUM_BUSY	(0x0) /* radio belongs to WiMAX */
+#define COEX_MEDIUM_ACTIVE	(0x1) /* radio belongs to WiFi */
+#define COEX_MEDIUM_PRE_RELEASE	(0x2) /* received radio release */
+#define COEX_MEDIUM_MSK		(0x7)
+
+/* send notification status (1 bit) */
+#define COEX_MEDIUM_CHANGED	(0x8)
+#define COEX_MEDIUM_CHANGED_MSK	(0x8)
+#define COEX_MEDIUM_SHIFT	(3)
+
+struct iwl_coex_medium_notification {
+	__le32 status;
+	__le32 events;
+} __packed;
+
+/*
+ * Coexistence EVENT  Command
+ * COEX_EVENT_CMD = 0x5c
+ *
+ * send from host to uCode for coex event request.
+ */
+/* flags options */
+#define COEX_EVENT_REQUEST_MSK	(0x1)
+
+struct iwl_coex_event_cmd {
+	u8 flags;
+	u8 event;
+	__le16 reserved;
+} __packed;
+
+struct iwl_coex_event_resp {
+	__le32 status;
+} __packed;
+
+
+/******************************************************************************
+ * Bluetooth Coexistence commands
+ *
+ *****************************************************************************/
+
+/*
+ * BT Status notification
+ * REPLY_BT_COEX_PROFILE_NOTIF = 0xce
+ */
+enum iwl_bt_coex_profile_traffic_load {
+	IWL_BT_COEX_TRAFFIC_LOAD_NONE = 	0,
+	IWL_BT_COEX_TRAFFIC_LOAD_LOW =		1,
+	IWL_BT_COEX_TRAFFIC_LOAD_HIGH = 	2,
+	IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS =	3,
+/*
+ * There are no more even though below is a u8, the
+ * indication from the BT device only has two bits.
+ */
+};
+
+#define BT_SESSION_ACTIVITY_1_UART_MSG		0x1
+#define BT_SESSION_ACTIVITY_2_UART_MSG		0x2
+
+/* BT UART message - Share Part (BT -> WiFi) */
+#define BT_UART_MSG_FRAME1MSGTYPE_POS		(0)
+#define BT_UART_MSG_FRAME1MSGTYPE_MSK		\
+		(0x7 << BT_UART_MSG_FRAME1MSGTYPE_POS)
+#define BT_UART_MSG_FRAME1SSN_POS		(3)
+#define BT_UART_MSG_FRAME1SSN_MSK		\
+		(0x3 << BT_UART_MSG_FRAME1SSN_POS)
+#define BT_UART_MSG_FRAME1UPDATEREQ_POS		(5)
+#define BT_UART_MSG_FRAME1UPDATEREQ_MSK		\
+		(0x1 << BT_UART_MSG_FRAME1UPDATEREQ_POS)
+#define BT_UART_MSG_FRAME1RESERVED_POS		(6)
+#define BT_UART_MSG_FRAME1RESERVED_MSK		\
+		(0x3 << BT_UART_MSG_FRAME1RESERVED_POS)
+
+#define BT_UART_MSG_FRAME2OPENCONNECTIONS_POS	(0)
+#define BT_UART_MSG_FRAME2OPENCONNECTIONS_MSK	\
+		(0x3 << BT_UART_MSG_FRAME2OPENCONNECTIONS_POS)
+#define BT_UART_MSG_FRAME2TRAFFICLOAD_POS	(2)
+#define BT_UART_MSG_FRAME2TRAFFICLOAD_MSK	\
+		(0x3 << BT_UART_MSG_FRAME2TRAFFICLOAD_POS)
+#define BT_UART_MSG_FRAME2CHLSEQN_POS		(4)
+#define BT_UART_MSG_FRAME2CHLSEQN_MSK		\
+		(0x1 << BT_UART_MSG_FRAME2CHLSEQN_POS)
+#define BT_UART_MSG_FRAME2INBAND_POS		(5)
+#define BT_UART_MSG_FRAME2INBAND_MSK		\
+		(0x1 << BT_UART_MSG_FRAME2INBAND_POS)
+#define BT_UART_MSG_FRAME2RESERVED_POS		(6)
+#define BT_UART_MSG_FRAME2RESERVED_MSK		\
+		(0x3 << BT_UART_MSG_FRAME2RESERVED_POS)
+
+#define BT_UART_MSG_FRAME3SCOESCO_POS		(0)
+#define BT_UART_MSG_FRAME3SCOESCO_MSK		\
+		(0x1 << BT_UART_MSG_FRAME3SCOESCO_POS)
+#define BT_UART_MSG_FRAME3SNIFF_POS		(1)
+#define BT_UART_MSG_FRAME3SNIFF_MSK		\
+		(0x1 << BT_UART_MSG_FRAME3SNIFF_POS)
+#define BT_UART_MSG_FRAME3A2DP_POS		(2)
+#define BT_UART_MSG_FRAME3A2DP_MSK		\
+		(0x1 << BT_UART_MSG_FRAME3A2DP_POS)
+#define BT_UART_MSG_FRAME3ACL_POS		(3)
+#define BT_UART_MSG_FRAME3ACL_MSK		\
+		(0x1 << BT_UART_MSG_FRAME3ACL_POS)
+#define BT_UART_MSG_FRAME3MASTER_POS		(4)
+#define BT_UART_MSG_FRAME3MASTER_MSK		\
+		(0x1 << BT_UART_MSG_FRAME3MASTER_POS)
+#define BT_UART_MSG_FRAME3OBEX_POS		(5)
+#define BT_UART_MSG_FRAME3OBEX_MSK		\
+		(0x1 << BT_UART_MSG_FRAME3OBEX_POS)
+#define BT_UART_MSG_FRAME3RESERVED_POS		(6)
+#define BT_UART_MSG_FRAME3RESERVED_MSK		\
+		(0x3 << BT_UART_MSG_FRAME3RESERVED_POS)
+
+#define BT_UART_MSG_FRAME4IDLEDURATION_POS	(0)
+#define BT_UART_MSG_FRAME4IDLEDURATION_MSK	\
+		(0x3F << BT_UART_MSG_FRAME4IDLEDURATION_POS)
+#define BT_UART_MSG_FRAME4RESERVED_POS		(6)
+#define BT_UART_MSG_FRAME4RESERVED_MSK		\
+		(0x3 << BT_UART_MSG_FRAME4RESERVED_POS)
+
+#define BT_UART_MSG_FRAME5TXACTIVITY_POS	(0)
+#define BT_UART_MSG_FRAME5TXACTIVITY_MSK	\
+		(0x3 << BT_UART_MSG_FRAME5TXACTIVITY_POS)
+#define BT_UART_MSG_FRAME5RXACTIVITY_POS	(2)
+#define BT_UART_MSG_FRAME5RXACTIVITY_MSK	\
+		(0x3 << BT_UART_MSG_FRAME5RXACTIVITY_POS)
+#define BT_UART_MSG_FRAME5ESCORETRANSMIT_POS	(4)
+#define BT_UART_MSG_FRAME5ESCORETRANSMIT_MSK	\
+		(0x3 << BT_UART_MSG_FRAME5ESCORETRANSMIT_POS)
+#define BT_UART_MSG_FRAME5RESERVED_POS		(6)
+#define BT_UART_MSG_FRAME5RESERVED_MSK		\
+		(0x3 << BT_UART_MSG_FRAME5RESERVED_POS)
+
+#define BT_UART_MSG_FRAME6SNIFFINTERVAL_POS	(0)
+#define BT_UART_MSG_FRAME6SNIFFINTERVAL_MSK	\
+		(0x1F << BT_UART_MSG_FRAME6SNIFFINTERVAL_POS)
+#define BT_UART_MSG_FRAME6DISCOVERABLE_POS	(5)
+#define BT_UART_MSG_FRAME6DISCOVERABLE_MSK	\
+		(0x1 << BT_UART_MSG_FRAME6DISCOVERABLE_POS)
+#define BT_UART_MSG_FRAME6RESERVED_POS		(6)
+#define BT_UART_MSG_FRAME6RESERVED_MSK		\
+		(0x3 << BT_UART_MSG_FRAME6RESERVED_POS)
+
+#define BT_UART_MSG_FRAME7SNIFFACTIVITY_POS	(0)
+#define BT_UART_MSG_FRAME7SNIFFACTIVITY_MSK	\
+		(0x7 << BT_UART_MSG_FRAME7SNIFFACTIVITY_POS)
+#define BT_UART_MSG_FRAME7PAGE_POS		(3)
+#define BT_UART_MSG_FRAME7PAGE_MSK		\
+		(0x1 << BT_UART_MSG_FRAME7PAGE_POS)
+#define BT_UART_MSG_FRAME7INQUIRY_POS		(4)
+#define BT_UART_MSG_FRAME7INQUIRY_MSK		\
+		(0x1 << BT_UART_MSG_FRAME7INQUIRY_POS)
+#define BT_UART_MSG_FRAME7CONNECTABLE_POS	(5)
+#define BT_UART_MSG_FRAME7CONNECTABLE_MSK	\
+		(0x1 << BT_UART_MSG_FRAME7CONNECTABLE_POS)
+#define BT_UART_MSG_FRAME7RESERVED_POS		(6)
+#define BT_UART_MSG_FRAME7RESERVED_MSK		\
+		(0x3 << BT_UART_MSG_FRAME7RESERVED_POS)
+
+/* BT Session Activity 2 UART message (BT -> WiFi) */
+#define BT_UART_MSG_2_FRAME1RESERVED1_POS	(5)
+#define BT_UART_MSG_2_FRAME1RESERVED1_MSK	\
+		(0x1<<BT_UART_MSG_2_FRAME1RESERVED1_POS)
+#define BT_UART_MSG_2_FRAME1RESERVED2_POS	(6)
+#define BT_UART_MSG_2_FRAME1RESERVED2_MSK	\
+		(0x3<<BT_UART_MSG_2_FRAME1RESERVED2_POS)
+
+#define BT_UART_MSG_2_FRAME2AGGTRAFFICLOAD_POS	(0)
+#define BT_UART_MSG_2_FRAME2AGGTRAFFICLOAD_MSK	\
+		(0x3F<<BT_UART_MSG_2_FRAME2AGGTRAFFICLOAD_POS)
+#define BT_UART_MSG_2_FRAME2RESERVED_POS	(6)
+#define BT_UART_MSG_2_FRAME2RESERVED_MSK	\
+		(0x3<<BT_UART_MSG_2_FRAME2RESERVED_POS)
+
+#define BT_UART_MSG_2_FRAME3BRLASTTXPOWER_POS	(0)
+#define BT_UART_MSG_2_FRAME3BRLASTTXPOWER_MSK	\
+		(0xF<<BT_UART_MSG_2_FRAME3BRLASTTXPOWER_POS)
+#define BT_UART_MSG_2_FRAME3INQPAGESRMODE_POS	(4)
+#define BT_UART_MSG_2_FRAME3INQPAGESRMODE_MSK	\
+		(0x1<<BT_UART_MSG_2_FRAME3INQPAGESRMODE_POS)
+#define BT_UART_MSG_2_FRAME3LEMASTER_POS	(5)
+#define BT_UART_MSG_2_FRAME3LEMASTER_MSK	\
+		(0x1<<BT_UART_MSG_2_FRAME3LEMASTER_POS)
+#define BT_UART_MSG_2_FRAME3RESERVED_POS	(6)
+#define BT_UART_MSG_2_FRAME3RESERVED_MSK	\
+		(0x3<<BT_UART_MSG_2_FRAME3RESERVED_POS)
+
+#define BT_UART_MSG_2_FRAME4LELASTTXPOWER_POS	(0)
+#define BT_UART_MSG_2_FRAME4LELASTTXPOWER_MSK	\
+		(0xF<<BT_UART_MSG_2_FRAME4LELASTTXPOWER_POS)
+#define BT_UART_MSG_2_FRAME4NUMLECONN_POS	(4)
+#define BT_UART_MSG_2_FRAME4NUMLECONN_MSK	\
+		(0x3<<BT_UART_MSG_2_FRAME4NUMLECONN_POS)
+#define BT_UART_MSG_2_FRAME4RESERVED_POS	(6)
+#define BT_UART_MSG_2_FRAME4RESERVED_MSK	\
+		(0x3<<BT_UART_MSG_2_FRAME4RESERVED_POS)
+
+#define BT_UART_MSG_2_FRAME5BTMINRSSI_POS	(0)
+#define BT_UART_MSG_2_FRAME5BTMINRSSI_MSK	\
+		(0xF<<BT_UART_MSG_2_FRAME5BTMINRSSI_POS)
+#define BT_UART_MSG_2_FRAME5LESCANINITMODE_POS	(4)
+#define BT_UART_MSG_2_FRAME5LESCANINITMODE_MSK	\
+		(0x1<<BT_UART_MSG_2_FRAME5LESCANINITMODE_POS)
+#define BT_UART_MSG_2_FRAME5LEADVERMODE_POS	(5)
+#define BT_UART_MSG_2_FRAME5LEADVERMODE_MSK	\
+		(0x1<<BT_UART_MSG_2_FRAME5LEADVERMODE_POS)
+#define BT_UART_MSG_2_FRAME5RESERVED_POS	(6)
+#define BT_UART_MSG_2_FRAME5RESERVED_MSK	\
+		(0x3<<BT_UART_MSG_2_FRAME5RESERVED_POS)
+
+#define BT_UART_MSG_2_FRAME6LECONNINTERVAL_POS	(0)
+#define BT_UART_MSG_2_FRAME6LECONNINTERVAL_MSK	\
+		(0x1F<<BT_UART_MSG_2_FRAME6LECONNINTERVAL_POS)
+#define BT_UART_MSG_2_FRAME6RFU_POS		(5)
+#define BT_UART_MSG_2_FRAME6RFU_MSK		\
+		(0x1<<BT_UART_MSG_2_FRAME6RFU_POS)
+#define BT_UART_MSG_2_FRAME6RESERVED_POS	(6)
+#define BT_UART_MSG_2_FRAME6RESERVED_MSK	\
+		(0x3<<BT_UART_MSG_2_FRAME6RESERVED_POS)
+
+#define BT_UART_MSG_2_FRAME7LECONNSLAVELAT_POS	(0)
+#define BT_UART_MSG_2_FRAME7LECONNSLAVELAT_MSK	\
+		(0x7<<BT_UART_MSG_2_FRAME7LECONNSLAVELAT_POS)
+#define BT_UART_MSG_2_FRAME7LEPROFILE1_POS	(3)
+#define BT_UART_MSG_2_FRAME7LEPROFILE1_MSK	\
+		(0x1<<BT_UART_MSG_2_FRAME7LEPROFILE1_POS)
+#define BT_UART_MSG_2_FRAME7LEPROFILE2_POS	(4)
+#define BT_UART_MSG_2_FRAME7LEPROFILE2_MSK	\
+		(0x1<<BT_UART_MSG_2_FRAME7LEPROFILE2_POS)
+#define BT_UART_MSG_2_FRAME7LEPROFILEOTHER_POS	(5)
+#define BT_UART_MSG_2_FRAME7LEPROFILEOTHER_MSK	\
+		(0x1<<BT_UART_MSG_2_FRAME7LEPROFILEOTHER_POS)
+#define BT_UART_MSG_2_FRAME7RESERVED_POS	(6)
+#define BT_UART_MSG_2_FRAME7RESERVED_MSK	\
+		(0x3<<BT_UART_MSG_2_FRAME7RESERVED_POS)
+
+
+#define BT_ENABLE_REDUCED_TXPOWER_THRESHOLD	(-62)
+#define BT_DISABLE_REDUCED_TXPOWER_THRESHOLD	(-65)
+
+struct iwl_bt_uart_msg {
+	u8 header;
+	u8 frame1;
+	u8 frame2;
+	u8 frame3;
+	u8 frame4;
+	u8 frame5;
+	u8 frame6;
+	u8 frame7;
+} __attribute__((packed));
+
+struct iwl_bt_coex_profile_notif {
+	struct iwl_bt_uart_msg last_bt_uart_msg;
+	u8 bt_status; /* 0 - off, 1 - on */
+	u8 bt_traffic_load; /* 0 .. 3? */
+	u8 bt_ci_compliance; /* 0 - not complied, 1 - complied */
+	u8 reserved;
+} __attribute__((packed));
+
+#define IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS	0
+#define IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_MSK	0x1
+#define IWL_BT_COEX_PRIO_TBL_PRIO_POS		1
+#define IWL_BT_COEX_PRIO_TBL_PRIO_MASK		0x0e
+#define IWL_BT_COEX_PRIO_TBL_RESERVED_POS	4
+#define IWL_BT_COEX_PRIO_TBL_RESERVED_MASK	0xf0
+#define IWL_BT_COEX_PRIO_TBL_PRIO_SHIFT		1
+
+/*
+ * BT Coexistence Priority table
+ * REPLY_BT_COEX_PRIO_TABLE = 0xcc
+ */
+enum bt_coex_prio_table_events {
+	BT_COEX_PRIO_TBL_EVT_INIT_CALIB1 = 0,
+	BT_COEX_PRIO_TBL_EVT_INIT_CALIB2 = 1,
+	BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_LOW1 = 2,
+	BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_LOW2 = 3, /* DC calib */
+	BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_HIGH1 = 4,
+	BT_COEX_PRIO_TBL_EVT_PERIODIC_CALIB_HIGH2 = 5,
+	BT_COEX_PRIO_TBL_EVT_DTIM = 6,
+	BT_COEX_PRIO_TBL_EVT_SCAN52 = 7,
+	BT_COEX_PRIO_TBL_EVT_SCAN24 = 8,
+	BT_COEX_PRIO_TBL_EVT_RESERVED0 = 9,
+	BT_COEX_PRIO_TBL_EVT_RESERVED1 = 10,
+	BT_COEX_PRIO_TBL_EVT_RESERVED2 = 11,
+	BT_COEX_PRIO_TBL_EVT_RESERVED3 = 12,
+	BT_COEX_PRIO_TBL_EVT_RESERVED4 = 13,
+	BT_COEX_PRIO_TBL_EVT_RESERVED5 = 14,
+	BT_COEX_PRIO_TBL_EVT_RESERVED6 = 15,
+	/* BT_COEX_PRIO_TBL_EVT_MAX should always be last */
+	BT_COEX_PRIO_TBL_EVT_MAX,
+};
+
+enum bt_coex_prio_table_priorities {
+	BT_COEX_PRIO_TBL_DISABLED = 0,
+	BT_COEX_PRIO_TBL_PRIO_LOW = 1,
+	BT_COEX_PRIO_TBL_PRIO_HIGH = 2,
+	BT_COEX_PRIO_TBL_PRIO_BYPASS = 3,
+	BT_COEX_PRIO_TBL_PRIO_COEX_OFF = 4,
+	BT_COEX_PRIO_TBL_PRIO_COEX_ON = 5,
+	BT_COEX_PRIO_TBL_PRIO_RSRVD1 = 6,
+	BT_COEX_PRIO_TBL_PRIO_RSRVD2 = 7,
+	BT_COEX_PRIO_TBL_MAX,
+};
+
+struct iwl_bt_coex_prio_table_cmd {
+	u8 prio_tbl[BT_COEX_PRIO_TBL_EVT_MAX];
+} __attribute__((packed));
+
+#define IWL_BT_COEX_ENV_CLOSE	0
+#define IWL_BT_COEX_ENV_OPEN	1
+/*
+ * BT Protection Envelope
+ * REPLY_BT_COEX_PROT_ENV = 0xcd
+ */
+struct iwl_bt_coex_prot_env_cmd {
+	u8 action; /* 0 = closed, 1 = open */
+	u8 type; /* 0 .. 15 */
+	u8 reserved[2];
+} __attribute__((packed));
+
+/*
+ * REPLY_D3_CONFIG
+ */
+enum iwlagn_d3_wakeup_filters {
+	IWLAGN_D3_WAKEUP_RFKILL		= BIT(0),
+	IWLAGN_D3_WAKEUP_SYSASSERT	= BIT(1),
+};
+
+struct iwlagn_d3_config_cmd {
+	__le32 min_sleep_time;
+	__le32 wakeup_flags;
+} __packed;
+
+/*
+ * REPLY_WOWLAN_PATTERNS
+ */
+#define IWLAGN_WOWLAN_MIN_PATTERN_LEN	16
+#define IWLAGN_WOWLAN_MAX_PATTERN_LEN	128
+
+struct iwlagn_wowlan_pattern {
+	u8 mask[IWLAGN_WOWLAN_MAX_PATTERN_LEN / 8];
+	u8 pattern[IWLAGN_WOWLAN_MAX_PATTERN_LEN];
+	u8 mask_size;
+	u8 pattern_size;
+	__le16 reserved;
+} __packed;
+
+#define IWLAGN_WOWLAN_MAX_PATTERNS	20
+
+struct iwlagn_wowlan_patterns_cmd {
+	__le32 n_patterns;
+	struct iwlagn_wowlan_pattern patterns[];
+} __packed;
+
+/*
+ * REPLY_WOWLAN_WAKEUP_FILTER
+ */
+enum iwlagn_wowlan_wakeup_filters {
+	IWLAGN_WOWLAN_WAKEUP_MAGIC_PACKET	= BIT(0),
+	IWLAGN_WOWLAN_WAKEUP_PATTERN_MATCH	= BIT(1),
+	IWLAGN_WOWLAN_WAKEUP_BEACON_MISS	= BIT(2),
+	IWLAGN_WOWLAN_WAKEUP_LINK_CHANGE	= BIT(3),
+	IWLAGN_WOWLAN_WAKEUP_GTK_REKEY_FAIL	= BIT(4),
+	IWLAGN_WOWLAN_WAKEUP_EAP_IDENT_REQ	= BIT(5),
+	IWLAGN_WOWLAN_WAKEUP_4WAY_HANDSHAKE	= BIT(6),
+	IWLAGN_WOWLAN_WAKEUP_ALWAYS		= BIT(7),
+	IWLAGN_WOWLAN_WAKEUP_ENABLE_NET_DETECT	= BIT(8),
+};
+
+struct iwlagn_wowlan_wakeup_filter_cmd {
+	__le32 enabled;
+	__le16 non_qos_seq;
+	__le16 reserved;
+	__le16 qos_seq[8];
+};
+
+/*
+ * REPLY_WOWLAN_TSC_RSC_PARAMS
+ */
+#define IWLAGN_NUM_RSC	16
+
+struct tkip_sc {
+	__le16 iv16;
+	__le16 pad;
+	__le32 iv32;
+} __packed;
+
+struct iwlagn_tkip_rsc_tsc {
+	struct tkip_sc unicast_rsc[IWLAGN_NUM_RSC];
+	struct tkip_sc multicast_rsc[IWLAGN_NUM_RSC];
+	struct tkip_sc tsc;
+} __packed;
+
+struct aes_sc {
+	__le64 pn;
+} __packed;
+
+struct iwlagn_aes_rsc_tsc {
+	struct aes_sc unicast_rsc[IWLAGN_NUM_RSC];
+	struct aes_sc multicast_rsc[IWLAGN_NUM_RSC];
+	struct aes_sc tsc;
+} __packed;
+
+union iwlagn_all_tsc_rsc {
+	struct iwlagn_tkip_rsc_tsc tkip;
+	struct iwlagn_aes_rsc_tsc aes;
+};
+
+struct iwlagn_wowlan_rsc_tsc_params_cmd {
+	union iwlagn_all_tsc_rsc all_tsc_rsc;
+} __packed;
+
+/*
+ * REPLY_WOWLAN_TKIP_PARAMS
+ */
+#define IWLAGN_MIC_KEY_SIZE	8
+#define IWLAGN_P1K_SIZE		5
+struct iwlagn_mic_keys {
+	u8 tx[IWLAGN_MIC_KEY_SIZE];
+	u8 rx_unicast[IWLAGN_MIC_KEY_SIZE];
+	u8 rx_mcast[IWLAGN_MIC_KEY_SIZE];
+} __packed;
+
+struct iwlagn_p1k_cache {
+	__le16 p1k[IWLAGN_P1K_SIZE];
+} __packed;
+
+#define IWLAGN_NUM_RX_P1K_CACHE	2
+
+struct iwlagn_wowlan_tkip_params_cmd {
+	struct iwlagn_mic_keys mic_keys;
+	struct iwlagn_p1k_cache tx;
+	struct iwlagn_p1k_cache rx_uni[IWLAGN_NUM_RX_P1K_CACHE];
+	struct iwlagn_p1k_cache rx_multi[IWLAGN_NUM_RX_P1K_CACHE];
+} __packed;
+
+/*
+ * REPLY_WOWLAN_KEK_KCK_MATERIAL
+ */
+
+#define IWLAGN_KCK_MAX_SIZE	32
+#define IWLAGN_KEK_MAX_SIZE	32
+
+struct iwlagn_wowlan_kek_kck_material_cmd {
+	u8	kck[IWLAGN_KCK_MAX_SIZE];
+	u8	kek[IWLAGN_KEK_MAX_SIZE];
+	__le16	kck_len;
+	__le16	kek_len;
+	__le64	replay_ctr;
+} __packed;
+
+/*
+ * REPLY_WIPAN_PARAMS = 0xb2 (Commands and Notification)
+ */
+
+/*
+ * Minimum slot time in TU
+ */
+#define IWL_MIN_SLOT_TIME	20
+
+/**
+ * struct iwl_wipan_slot
+ * @width: Time in TU
+ * @type:
+ *   0 - BSS
+ *   1 - PAN
+ */
+struct iwl_wipan_slot {
+	__le16 width;
+	u8 type;
+	u8 reserved;
+} __packed;
+
+#define IWL_WIPAN_PARAMS_FLG_LEAVE_CHANNEL_CTS		BIT(1)	/* reserved */
+#define IWL_WIPAN_PARAMS_FLG_LEAVE_CHANNEL_QUIET	BIT(2)	/* reserved */
+#define IWL_WIPAN_PARAMS_FLG_SLOTTED_MODE		BIT(3)	/* reserved */
+#define IWL_WIPAN_PARAMS_FLG_FILTER_BEACON_NOTIF	BIT(4)
+#define IWL_WIPAN_PARAMS_FLG_FULL_SLOTTED_MODE		BIT(5)
+
+/**
+ * struct iwl_wipan_params_cmd
+ * @flags:
+ *   bit0: reserved
+ *   bit1: CP leave channel with CTS
+ *   bit2: CP leave channel qith Quiet
+ *   bit3: slotted mode
+ *     1 - work in slotted mode
+ *     0 - work in non slotted mode
+ *   bit4: filter beacon notification
+ *   bit5: full tx slotted mode. if this flag is set,
+ *         uCode will perform leaving channel methods in context switch
+ *         also when working in same channel mode
+ * @num_slots: 1 - 10
+ */
+struct iwl_wipan_params_cmd {
+	__le16 flags;
+	u8 reserved;
+	u8 num_slots;
+	struct iwl_wipan_slot slots[10];
+} __packed;
+
+/*
+ * REPLY_WIPAN_P2P_CHANNEL_SWITCH = 0xb9
+ *
+ * TODO: Figure out what this is used for,
+ *	 it can only switch between 2.4 GHz
+ *	 channels!!
+ */
+
+struct iwl_wipan_p2p_channel_switch_cmd {
+	__le16 channel;
+	__le16 reserved;
+};
+
+/*
+ * REPLY_WIPAN_NOA_NOTIFICATION = 0xbc
+ *
+ * This is used by the device to notify us of the
+ * NoA schedule it determined so we can forward it
+ * to userspace for inclusion in probe responses.
+ *
+ * In beacons, the NoA schedule is simply appended
+ * to the frame we give the device.
+ */
+
+struct iwl_wipan_noa_descriptor {
+	u8 count;
+	__le32 duration;
+	__le32 interval;
+	__le32 starttime;
+} __packed;
+
+struct iwl_wipan_noa_attribute {
+	u8 id;
+	__le16 length;
+	u8 index;
+	u8 ct_window;
+	struct iwl_wipan_noa_descriptor descr0, descr1;
+	u8 reserved;
+} __packed;
+
+struct iwl_wipan_noa_notification {
+	u32 noa_active;
+	struct iwl_wipan_noa_attribute noa_attribute;
+} __packed;
+
+#endif				/* __iwl_commands_h__ */
diff --git a/drivers/net/wireless/iwlwifi/dvm/debugfs.c b/drivers/net/wireless/iwlwifi/dvm/debugfs.c
new file mode 100644
index 00000000000..8a2d9e643b1
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/debugfs.c
@@ -0,0 +1,2426 @@
+/******************************************************************************
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *****************************************************************************/
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/debugfs.h>
+#include <linux/ieee80211.h>
+#include <net/mac80211.h>
+#include "iwl-debug.h"
+#include "iwl-io.h"
+#include "dev.h"
+#include "agn.h"
+
+/* create and remove of files */
+#define DEBUGFS_ADD_FILE(name, parent, mode) do {			\
+	if (!debugfs_create_file(#name, mode, parent, priv,		\
+				 &iwl_dbgfs_##name##_ops))		\
+		goto err;						\
+} while (0)
+
+#define DEBUGFS_ADD_BOOL(name, parent, ptr) do {			\
+	struct dentry *__tmp;						\
+	__tmp = debugfs_create_bool(#name, S_IWUSR | S_IRUSR,		\
+				    parent, ptr);			\
+	if (IS_ERR(__tmp) || !__tmp)					\
+		goto err;						\
+} while (0)
+
+#define DEBUGFS_ADD_X32(name, parent, ptr) do {				\
+	struct dentry *__tmp;						\
+	__tmp = debugfs_create_x32(#name, S_IWUSR | S_IRUSR,		\
+				   parent, ptr);			\
+	if (IS_ERR(__tmp) || !__tmp)					\
+		goto err;						\
+} while (0)
+
+#define DEBUGFS_ADD_U32(name, parent, ptr, mode) do {			\
+	struct dentry *__tmp;						\
+	__tmp = debugfs_create_u32(#name, mode,				\
+				   parent, ptr);			\
+	if (IS_ERR(__tmp) || !__tmp)					\
+		goto err;						\
+} while (0)
+
+/* file operation */
+#define DEBUGFS_READ_FUNC(name)                                         \
+static ssize_t iwl_dbgfs_##name##_read(struct file *file,               \
+					char __user *user_buf,          \
+					size_t count, loff_t *ppos);
+
+#define DEBUGFS_WRITE_FUNC(name)                                        \
+static ssize_t iwl_dbgfs_##name##_write(struct file *file,              \
+					const char __user *user_buf,    \
+					size_t count, loff_t *ppos);
+
+
+#define DEBUGFS_READ_FILE_OPS(name)                                     \
+	DEBUGFS_READ_FUNC(name);                                        \
+static const struct file_operations iwl_dbgfs_##name##_ops = {          \
+	.read = iwl_dbgfs_##name##_read,                       		\
+	.open = simple_open,						\
+	.llseek = generic_file_llseek,					\
+};
+
+#define DEBUGFS_WRITE_FILE_OPS(name)                                    \
+	DEBUGFS_WRITE_FUNC(name);                                       \
+static const struct file_operations iwl_dbgfs_##name##_ops = {          \
+	.write = iwl_dbgfs_##name##_write,                              \
+	.open = simple_open,						\
+	.llseek = generic_file_llseek,					\
+};
+
+
+#define DEBUGFS_READ_WRITE_FILE_OPS(name)                               \
+	DEBUGFS_READ_FUNC(name);                                        \
+	DEBUGFS_WRITE_FUNC(name);                                       \
+static const struct file_operations iwl_dbgfs_##name##_ops = {          \
+	.write = iwl_dbgfs_##name##_write,                              \
+	.read = iwl_dbgfs_##name##_read,                                \
+	.open = simple_open,						\
+	.llseek = generic_file_llseek,					\
+};
+
+static ssize_t iwl_dbgfs_sram_read(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos)
+{
+	u32 val = 0;
+	char *buf;
+	ssize_t ret;
+	int i = 0;
+	bool device_format = false;
+	int offset = 0;
+	int len = 0;
+	int pos = 0;
+	int sram;
+	struct iwl_priv *priv = file->private_data;
+	const struct fw_img *img;
+	size_t bufsz;
+
+	/* default is to dump the entire data segment */
+	if (!priv->dbgfs_sram_offset && !priv->dbgfs_sram_len) {
+		priv->dbgfs_sram_offset = 0x800000;
+		if (!priv->ucode_loaded)
+			return -EINVAL;
+		img = &priv->fw->img[priv->cur_ucode];
+		priv->dbgfs_sram_len = img->sec[IWL_UCODE_SECTION_DATA].len;
+	}
+	len = priv->dbgfs_sram_len;
+
+	if (len == -4) {
+		device_format = true;
+		len = 4;
+	}
+
+	bufsz =  50 + len * 4;
+	buf = kmalloc(bufsz, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	pos += scnprintf(buf + pos, bufsz - pos, "sram_len: 0x%x\n",
+			 len);
+	pos += scnprintf(buf + pos, bufsz - pos, "sram_offset: 0x%x\n",
+			priv->dbgfs_sram_offset);
+
+	/* adjust sram address since reads are only on even u32 boundaries */
+	offset = priv->dbgfs_sram_offset & 0x3;
+	sram = priv->dbgfs_sram_offset & ~0x3;
+
+	/* read the first u32 from sram */
+	val = iwl_read_targ_mem(priv->trans, sram);
+
+	for (; len; len--) {
+		/* put the address at the start of every line */
+		if (i == 0)
+			pos += scnprintf(buf + pos, bufsz - pos,
+				"%08X: ", sram + offset);
+
+		if (device_format)
+			pos += scnprintf(buf + pos, bufsz - pos,
+				"%02x", (val >> (8 * (3 - offset))) & 0xff);
+		else
+			pos += scnprintf(buf + pos, bufsz - pos,
+				"%02x ", (val >> (8 * offset)) & 0xff);
+
+		/* if all bytes processed, read the next u32 from sram */
+		if (++offset == 4) {
+			sram += 4;
+			offset = 0;
+			val = iwl_read_targ_mem(priv->trans, sram);
+		}
+
+		/* put in extra spaces and split lines for human readability */
+		if (++i == 16) {
+			i = 0;
+			pos += scnprintf(buf + pos, bufsz - pos, "\n");
+		} else if (!(i & 7)) {
+			pos += scnprintf(buf + pos, bufsz - pos, "   ");
+		} else if (!(i & 3)) {
+			pos += scnprintf(buf + pos, bufsz - pos, " ");
+		}
+	}
+	if (i)
+		pos += scnprintf(buf + pos, bufsz - pos, "\n");
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+	kfree(buf);
+	return ret;
+}
+
+static ssize_t iwl_dbgfs_sram_write(struct file *file,
+					const char __user *user_buf,
+					size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	char buf[64];
+	int buf_size;
+	u32 offset, len;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) -  1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+
+	if (sscanf(buf, "%x,%x", &offset, &len) == 2) {
+		priv->dbgfs_sram_offset = offset;
+		priv->dbgfs_sram_len = len;
+	} else if (sscanf(buf, "%x", &offset) == 1) {
+		priv->dbgfs_sram_offset = offset;
+		priv->dbgfs_sram_len = -4;
+	} else {
+		priv->dbgfs_sram_offset = 0;
+		priv->dbgfs_sram_len = 0;
+	}
+
+	return count;
+}
+
+static ssize_t iwl_dbgfs_wowlan_sram_read(struct file *file,
+					  char __user *user_buf,
+					  size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	const struct fw_img *img = &priv->fw->img[IWL_UCODE_WOWLAN];
+
+	if (!priv->wowlan_sram)
+		return -ENODATA;
+
+	return simple_read_from_buffer(user_buf, count, ppos,
+				       priv->wowlan_sram,
+				       img->sec[IWL_UCODE_SECTION_DATA].len);
+}
+static ssize_t iwl_dbgfs_stations_read(struct file *file, char __user *user_buf,
+					size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	struct iwl_station_entry *station;
+	struct iwl_tid_data *tid_data;
+	char *buf;
+	int i, j, pos = 0;
+	ssize_t ret;
+	/* Add 30 for initial string */
+	const size_t bufsz = 30 + sizeof(char) * 500 * (priv->num_stations);
+
+	buf = kmalloc(bufsz, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	pos += scnprintf(buf + pos, bufsz - pos, "num of stations: %d\n\n",
+			priv->num_stations);
+
+	for (i = 0; i < IWLAGN_STATION_COUNT; i++) {
+		station = &priv->stations[i];
+		if (!station->used)
+			continue;
+		pos += scnprintf(buf + pos, bufsz - pos,
+				 "station %d - addr: %pM, flags: %#x\n",
+				 i, station->sta.sta.addr,
+				 station->sta.station_flags_msk);
+		pos += scnprintf(buf + pos, bufsz - pos,
+				"TID seqno  next_rclmd "
+				"rate_n_flags state txq\n");
+
+		for (j = 0; j < IWL_MAX_TID_COUNT; j++) {
+			tid_data = &priv->tid_data[i][j];
+			pos += scnprintf(buf + pos, bufsz - pos,
+				"%d:  0x%.4x 0x%.4x     0x%.8x   "
+				"%d     %.2d",
+				j, tid_data->seq_number,
+				tid_data->next_reclaimed,
+				tid_data->agg.rate_n_flags,
+				tid_data->agg.state,
+				tid_data->agg.txq_id);
+
+			if (tid_data->agg.wait_for_ba)
+				pos += scnprintf(buf + pos, bufsz - pos,
+						 " - waitforba");
+			pos += scnprintf(buf + pos, bufsz - pos, "\n");
+		}
+
+		pos += scnprintf(buf + pos, bufsz - pos, "\n");
+	}
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+	kfree(buf);
+	return ret;
+}
+
+static ssize_t iwl_dbgfs_nvm_read(struct file *file,
+				       char __user *user_buf,
+				       size_t count,
+				       loff_t *ppos)
+{
+	ssize_t ret;
+	struct iwl_priv *priv = file->private_data;
+	int pos = 0, ofs = 0, buf_size = 0;
+	const u8 *ptr;
+	char *buf;
+	u16 eeprom_ver;
+	size_t eeprom_len = priv->eeprom_blob_size;
+	buf_size = 4 * eeprom_len + 256;
+
+	if (eeprom_len % 16)
+		return -ENODATA;
+
+	ptr = priv->eeprom_blob;
+	if (!ptr)
+		return -ENOMEM;
+
+	/* 4 characters for byte 0xYY */
+	buf = kzalloc(buf_size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	eeprom_ver = priv->eeprom_data->eeprom_version;
+	pos += scnprintf(buf + pos, buf_size - pos,
+			 "NVM version: 0x%x\n", eeprom_ver);
+	for (ofs = 0 ; ofs < eeprom_len ; ofs += 16) {
+		pos += scnprintf(buf + pos, buf_size - pos, "0x%.4x ", ofs);
+		hex_dump_to_buffer(ptr + ofs, 16 , 16, 2, buf + pos,
+				   buf_size - pos, 0);
+		pos += strlen(buf + pos);
+		if (buf_size - pos > 0)
+			buf[pos++] = '\n';
+	}
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+	kfree(buf);
+	return ret;
+}
+
+static ssize_t iwl_dbgfs_channels_read(struct file *file, char __user *user_buf,
+				       size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	struct ieee80211_channel *channels = NULL;
+	const struct ieee80211_supported_band *supp_band = NULL;
+	int pos = 0, i, bufsz = PAGE_SIZE;
+	char *buf;
+	ssize_t ret;
+
+	buf = kzalloc(bufsz, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	supp_band = iwl_get_hw_mode(priv, IEEE80211_BAND_2GHZ);
+	if (supp_band) {
+		channels = supp_band->channels;
+
+		pos += scnprintf(buf + pos, bufsz - pos,
+				"Displaying %d channels in 2.4GHz band 802.11bg):\n",
+				supp_band->n_channels);
+
+		for (i = 0; i < supp_band->n_channels; i++)
+			pos += scnprintf(buf + pos, bufsz - pos,
+					"%d: %ddBm: BSS%s%s, %s.\n",
+					channels[i].hw_value,
+					channels[i].max_power,
+					channels[i].flags & IEEE80211_CHAN_RADAR ?
+					" (IEEE 802.11h required)" : "",
+					((channels[i].flags & IEEE80211_CHAN_NO_IBSS)
+					|| (channels[i].flags &
+					IEEE80211_CHAN_RADAR)) ? "" :
+					", IBSS",
+					channels[i].flags &
+					IEEE80211_CHAN_PASSIVE_SCAN ?
+					"passive only" : "active/passive");
+	}
+	supp_band = iwl_get_hw_mode(priv, IEEE80211_BAND_5GHZ);
+	if (supp_band) {
+		channels = supp_band->channels;
+
+		pos += scnprintf(buf + pos, bufsz - pos,
+				"Displaying %d channels in 5.2GHz band (802.11a)\n",
+				supp_band->n_channels);
+
+		for (i = 0; i < supp_band->n_channels; i++)
+			pos += scnprintf(buf + pos, bufsz - pos,
+					"%d: %ddBm: BSS%s%s, %s.\n",
+					channels[i].hw_value,
+					channels[i].max_power,
+					channels[i].flags & IEEE80211_CHAN_RADAR ?
+					" (IEEE 802.11h required)" : "",
+					((channels[i].flags & IEEE80211_CHAN_NO_IBSS)
+					|| (channels[i].flags &
+					IEEE80211_CHAN_RADAR)) ? "" :
+					", IBSS",
+					channels[i].flags &
+					IEEE80211_CHAN_PASSIVE_SCAN ?
+					"passive only" : "active/passive");
+	}
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+	kfree(buf);
+	return ret;
+}
+
+static ssize_t iwl_dbgfs_status_read(struct file *file,
+						char __user *user_buf,
+						size_t count, loff_t *ppos) {
+
+	struct iwl_priv *priv = file->private_data;
+	char buf[512];
+	int pos = 0;
+	const size_t bufsz = sizeof(buf);
+
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_RF_KILL_HW:\t %d\n",
+		test_bit(STATUS_RF_KILL_HW, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_CT_KILL:\t\t %d\n",
+		test_bit(STATUS_CT_KILL, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_ALIVE:\t\t %d\n",
+		test_bit(STATUS_ALIVE, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_READY:\t\t %d\n",
+		test_bit(STATUS_READY, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_EXIT_PENDING:\t %d\n",
+		test_bit(STATUS_EXIT_PENDING, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_STATISTICS:\t %d\n",
+		test_bit(STATUS_STATISTICS, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_SCANNING:\t %d\n",
+		test_bit(STATUS_SCANNING, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_SCAN_ABORTING:\t %d\n",
+		test_bit(STATUS_SCAN_ABORTING, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_SCAN_HW:\t\t %d\n",
+		test_bit(STATUS_SCAN_HW, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_POWER_PMI:\t %d\n",
+		test_bit(STATUS_POWER_PMI, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_FW_ERROR:\t %d\n",
+		test_bit(STATUS_FW_ERROR, &priv->status));
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
+static ssize_t iwl_dbgfs_rx_handlers_read(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos) {
+
+	struct iwl_priv *priv = file->private_data;
+
+	int pos = 0;
+	int cnt = 0;
+	char *buf;
+	int bufsz = 24 * 64; /* 24 items * 64 char per item */
+	ssize_t ret;
+
+	buf = kzalloc(bufsz, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	for (cnt = 0; cnt < REPLY_MAX; cnt++) {
+		if (priv->rx_handlers_stats[cnt] > 0)
+			pos += scnprintf(buf + pos, bufsz - pos,
+				"\tRx handler[%36s]:\t\t %u\n",
+				iwl_dvm_get_cmd_string(cnt),
+				priv->rx_handlers_stats[cnt]);
+	}
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+	kfree(buf);
+	return ret;
+}
+
+static ssize_t iwl_dbgfs_rx_handlers_write(struct file *file,
+					 const char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+
+	char buf[8];
+	int buf_size;
+	u32 reset_flag;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) -  1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	if (sscanf(buf, "%x", &reset_flag) != 1)
+		return -EFAULT;
+	if (reset_flag == 0)
+		memset(&priv->rx_handlers_stats[0], 0,
+			sizeof(priv->rx_handlers_stats));
+
+	return count;
+}
+
+static ssize_t iwl_dbgfs_qos_read(struct file *file, char __user *user_buf,
+				       size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	struct iwl_rxon_context *ctx;
+	int pos = 0, i;
+	char buf[256 * NUM_IWL_RXON_CTX];
+	const size_t bufsz = sizeof(buf);
+
+	for_each_context(priv, ctx) {
+		pos += scnprintf(buf + pos, bufsz - pos, "context %d:\n",
+				 ctx->ctxid);
+		for (i = 0; i < AC_NUM; i++) {
+			pos += scnprintf(buf + pos, bufsz - pos,
+				"\tcw_min\tcw_max\taifsn\ttxop\n");
+			pos += scnprintf(buf + pos, bufsz - pos,
+				"AC[%d]\t%u\t%u\t%u\t%u\n", i,
+				ctx->qos_data.def_qos_parm.ac[i].cw_min,
+				ctx->qos_data.def_qos_parm.ac[i].cw_max,
+				ctx->qos_data.def_qos_parm.ac[i].aifsn,
+				ctx->qos_data.def_qos_parm.ac[i].edca_txop);
+		}
+		pos += scnprintf(buf + pos, bufsz - pos, "\n");
+	}
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
+static ssize_t iwl_dbgfs_thermal_throttling_read(struct file *file,
+				char __user *user_buf,
+				size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+	struct iwl_tt_restriction *restriction;
+	char buf[100];
+	int pos = 0;
+	const size_t bufsz = sizeof(buf);
+
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"Thermal Throttling Mode: %s\n",
+			tt->advanced_tt ? "Advance" : "Legacy");
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"Thermal Throttling State: %d\n",
+			tt->state);
+	if (tt->advanced_tt) {
+		restriction = tt->restriction + tt->state;
+		pos += scnprintf(buf + pos, bufsz - pos,
+				"Tx mode: %d\n",
+				restriction->tx_stream);
+		pos += scnprintf(buf + pos, bufsz - pos,
+				"Rx mode: %d\n",
+				restriction->rx_stream);
+		pos += scnprintf(buf + pos, bufsz - pos,
+				"HT mode: %d\n",
+				restriction->is_ht);
+	}
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
+static ssize_t iwl_dbgfs_disable_ht40_write(struct file *file,
+					 const char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	char buf[8];
+	int buf_size;
+	int ht40;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) -  1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	if (sscanf(buf, "%d", &ht40) != 1)
+		return -EFAULT;
+	if (!iwl_is_any_associated(priv))
+		priv->disable_ht40 = ht40 ? true : false;
+	else
+		return -EINVAL;
+
+	return count;
+}
+
+static ssize_t iwl_dbgfs_disable_ht40_read(struct file *file,
+					 char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	char buf[100];
+	int pos = 0;
+	const size_t bufsz = sizeof(buf);
+
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"11n 40MHz Mode: %s\n",
+			priv->disable_ht40 ? "Disabled" : "Enabled");
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
+static ssize_t iwl_dbgfs_temperature_read(struct file *file,
+					 char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	char buf[8];
+	int pos = 0;
+	const size_t bufsz = sizeof(buf);
+
+	pos += scnprintf(buf + pos, bufsz - pos, "%d\n", priv->temperature);
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
+
+static ssize_t iwl_dbgfs_sleep_level_override_write(struct file *file,
+						    const char __user *user_buf,
+						    size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	char buf[8];
+	int buf_size;
+	int value;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) -  1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+
+	if (sscanf(buf, "%d", &value) != 1)
+		return -EINVAL;
+
+	/*
+	 * Our users expect 0 to be "CAM", but 0 isn't actually
+	 * valid here. However, let's not confuse them and present
+	 * IWL_POWER_INDEX_1 as "1", not "0".
+	 */
+	if (value == 0)
+		return -EINVAL;
+	else if (value > 0)
+		value -= 1;
+
+	if (value != -1 && (value < 0 || value >= IWL_POWER_NUM))
+		return -EINVAL;
+
+	if (!iwl_is_ready_rf(priv))
+		return -EAGAIN;
+
+	priv->power_data.debug_sleep_level_override = value;
+
+	mutex_lock(&priv->mutex);
+	iwl_power_update_mode(priv, true);
+	mutex_unlock(&priv->mutex);
+
+	return count;
+}
+
+static ssize_t iwl_dbgfs_sleep_level_override_read(struct file *file,
+						   char __user *user_buf,
+						   size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	char buf[10];
+	int pos, value;
+	const size_t bufsz = sizeof(buf);
+
+	/* see the write function */
+	value = priv->power_data.debug_sleep_level_override;
+	if (value >= 0)
+		value += 1;
+
+	pos = scnprintf(buf, bufsz, "%d\n", value);
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
+static ssize_t iwl_dbgfs_current_sleep_command_read(struct file *file,
+						    char __user *user_buf,
+						    size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	char buf[200];
+	int pos = 0, i;
+	const size_t bufsz = sizeof(buf);
+	struct iwl_powertable_cmd *cmd = &priv->power_data.sleep_cmd;
+
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "flags: %#.2x\n", le16_to_cpu(cmd->flags));
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "RX/TX timeout: %d/%d usec\n",
+			 le32_to_cpu(cmd->rx_data_timeout),
+			 le32_to_cpu(cmd->tx_data_timeout));
+	for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
+		pos += scnprintf(buf + pos, bufsz - pos,
+				 "sleep_interval[%d]: %d\n", i,
+				 le32_to_cpu(cmd->sleep_interval[i]));
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
+DEBUGFS_READ_WRITE_FILE_OPS(sram);
+DEBUGFS_READ_FILE_OPS(wowlan_sram);
+DEBUGFS_READ_FILE_OPS(nvm);
+DEBUGFS_READ_FILE_OPS(stations);
+DEBUGFS_READ_FILE_OPS(channels);
+DEBUGFS_READ_FILE_OPS(status);
+DEBUGFS_READ_WRITE_FILE_OPS(rx_handlers);
+DEBUGFS_READ_FILE_OPS(qos);
+DEBUGFS_READ_FILE_OPS(thermal_throttling);
+DEBUGFS_READ_WRITE_FILE_OPS(disable_ht40);
+DEBUGFS_READ_FILE_OPS(temperature);
+DEBUGFS_READ_WRITE_FILE_OPS(sleep_level_override);
+DEBUGFS_READ_FILE_OPS(current_sleep_command);
+
+static const char *fmt_value = "  %-30s %10u\n";
+static const char *fmt_hex   = "  %-30s       0x%02X\n";
+static const char *fmt_table = "  %-30s %10u  %10u  %10u  %10u\n";
+static const char *fmt_header =
+	"%-32s    current  cumulative       delta         max\n";
+
+static int iwl_statistics_flag(struct iwl_priv *priv, char *buf, int bufsz)
+{
+	int p = 0;
+	u32 flag;
+
+	lockdep_assert_held(&priv->statistics.lock);
+
+	flag = le32_to_cpu(priv->statistics.flag);
+
+	p += scnprintf(buf + p, bufsz - p, "Statistics Flag(0x%X):\n", flag);
+	if (flag & UCODE_STATISTICS_CLEAR_MSK)
+		p += scnprintf(buf + p, bufsz - p,
+		"\tStatistics have been cleared\n");
+	p += scnprintf(buf + p, bufsz - p, "\tOperational Frequency: %s\n",
+		(flag & UCODE_STATISTICS_FREQUENCY_MSK)
+		? "2.4 GHz" : "5.2 GHz");
+	p += scnprintf(buf + p, bufsz - p, "\tTGj Narrow Band: %s\n",
+		(flag & UCODE_STATISTICS_NARROW_BAND_MSK)
+		 ? "enabled" : "disabled");
+
+	return p;
+}
+
+static ssize_t iwl_dbgfs_ucode_rx_stats_read(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	int pos = 0;
+	char *buf;
+	int bufsz = sizeof(struct statistics_rx_phy) * 40 +
+		    sizeof(struct statistics_rx_non_phy) * 40 +
+		    sizeof(struct statistics_rx_ht_phy) * 40 + 400;
+	ssize_t ret;
+	struct statistics_rx_phy *ofdm, *accum_ofdm, *delta_ofdm, *max_ofdm;
+	struct statistics_rx_phy *cck, *accum_cck, *delta_cck, *max_cck;
+	struct statistics_rx_non_phy *general, *accum_general;
+	struct statistics_rx_non_phy *delta_general, *max_general;
+	struct statistics_rx_ht_phy *ht, *accum_ht, *delta_ht, *max_ht;
+
+	if (!iwl_is_alive(priv))
+		return -EAGAIN;
+
+	buf = kzalloc(bufsz, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	/*
+	 * the statistic information display here is based on
+	 * the last statistics notification from uCode
+	 * might not reflect the current uCode activity
+	 */
+	spin_lock_bh(&priv->statistics.lock);
+	ofdm = &priv->statistics.rx_ofdm;
+	cck = &priv->statistics.rx_cck;
+	general = &priv->statistics.rx_non_phy;
+	ht = &priv->statistics.rx_ofdm_ht;
+	accum_ofdm = &priv->accum_stats.rx_ofdm;
+	accum_cck = &priv->accum_stats.rx_cck;
+	accum_general = &priv->accum_stats.rx_non_phy;
+	accum_ht = &priv->accum_stats.rx_ofdm_ht;
+	delta_ofdm = &priv->delta_stats.rx_ofdm;
+	delta_cck = &priv->delta_stats.rx_cck;
+	delta_general = &priv->delta_stats.rx_non_phy;
+	delta_ht = &priv->delta_stats.rx_ofdm_ht;
+	max_ofdm = &priv->max_delta_stats.rx_ofdm;
+	max_cck = &priv->max_delta_stats.rx_cck;
+	max_general = &priv->max_delta_stats.rx_non_phy;
+	max_ht = &priv->max_delta_stats.rx_ofdm_ht;
+
+	pos += iwl_statistics_flag(priv, buf, bufsz);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_header, "Statistics_Rx - OFDM:");
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "ina_cnt:",
+			 le32_to_cpu(ofdm->ina_cnt),
+			 accum_ofdm->ina_cnt,
+			 delta_ofdm->ina_cnt, max_ofdm->ina_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "fina_cnt:",
+			 le32_to_cpu(ofdm->fina_cnt), accum_ofdm->fina_cnt,
+			 delta_ofdm->fina_cnt, max_ofdm->fina_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "plcp_err:",
+			 le32_to_cpu(ofdm->plcp_err), accum_ofdm->plcp_err,
+			 delta_ofdm->plcp_err, max_ofdm->plcp_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "crc32_err:",
+			 le32_to_cpu(ofdm->crc32_err), accum_ofdm->crc32_err,
+			 delta_ofdm->crc32_err, max_ofdm->crc32_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "overrun_err:",
+			 le32_to_cpu(ofdm->overrun_err),
+			 accum_ofdm->overrun_err, delta_ofdm->overrun_err,
+			 max_ofdm->overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "early_overrun_err:",
+			 le32_to_cpu(ofdm->early_overrun_err),
+			 accum_ofdm->early_overrun_err,
+			 delta_ofdm->early_overrun_err,
+			 max_ofdm->early_overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "crc32_good:",
+			 le32_to_cpu(ofdm->crc32_good),
+			 accum_ofdm->crc32_good, delta_ofdm->crc32_good,
+			 max_ofdm->crc32_good);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "false_alarm_cnt:",
+			 le32_to_cpu(ofdm->false_alarm_cnt),
+			 accum_ofdm->false_alarm_cnt,
+			 delta_ofdm->false_alarm_cnt,
+			 max_ofdm->false_alarm_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "fina_sync_err_cnt:",
+			 le32_to_cpu(ofdm->fina_sync_err_cnt),
+			 accum_ofdm->fina_sync_err_cnt,
+			 delta_ofdm->fina_sync_err_cnt,
+			 max_ofdm->fina_sync_err_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "sfd_timeout:",
+			 le32_to_cpu(ofdm->sfd_timeout),
+			 accum_ofdm->sfd_timeout, delta_ofdm->sfd_timeout,
+			 max_ofdm->sfd_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "fina_timeout:",
+			 le32_to_cpu(ofdm->fina_timeout),
+			 accum_ofdm->fina_timeout, delta_ofdm->fina_timeout,
+			 max_ofdm->fina_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "unresponded_rts:",
+			 le32_to_cpu(ofdm->unresponded_rts),
+			 accum_ofdm->unresponded_rts,
+			 delta_ofdm->unresponded_rts,
+			 max_ofdm->unresponded_rts);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "rxe_frame_lmt_ovrun:",
+			 le32_to_cpu(ofdm->rxe_frame_limit_overrun),
+			 accum_ofdm->rxe_frame_limit_overrun,
+			 delta_ofdm->rxe_frame_limit_overrun,
+			 max_ofdm->rxe_frame_limit_overrun);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "sent_ack_cnt:",
+			 le32_to_cpu(ofdm->sent_ack_cnt),
+			 accum_ofdm->sent_ack_cnt, delta_ofdm->sent_ack_cnt,
+			 max_ofdm->sent_ack_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "sent_cts_cnt:",
+			 le32_to_cpu(ofdm->sent_cts_cnt),
+			 accum_ofdm->sent_cts_cnt, delta_ofdm->sent_cts_cnt,
+			 max_ofdm->sent_cts_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "sent_ba_rsp_cnt:",
+			 le32_to_cpu(ofdm->sent_ba_rsp_cnt),
+			 accum_ofdm->sent_ba_rsp_cnt,
+			 delta_ofdm->sent_ba_rsp_cnt,
+			 max_ofdm->sent_ba_rsp_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "dsp_self_kill:",
+			 le32_to_cpu(ofdm->dsp_self_kill),
+			 accum_ofdm->dsp_self_kill,
+			 delta_ofdm->dsp_self_kill,
+			 max_ofdm->dsp_self_kill);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "mh_format_err:",
+			 le32_to_cpu(ofdm->mh_format_err),
+			 accum_ofdm->mh_format_err,
+			 delta_ofdm->mh_format_err,
+			 max_ofdm->mh_format_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "re_acq_main_rssi_sum:",
+			 le32_to_cpu(ofdm->re_acq_main_rssi_sum),
+			 accum_ofdm->re_acq_main_rssi_sum,
+			 delta_ofdm->re_acq_main_rssi_sum,
+			 max_ofdm->re_acq_main_rssi_sum);
+
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_header, "Statistics_Rx - CCK:");
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "ina_cnt:",
+			 le32_to_cpu(cck->ina_cnt), accum_cck->ina_cnt,
+			 delta_cck->ina_cnt, max_cck->ina_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "fina_cnt:",
+			 le32_to_cpu(cck->fina_cnt), accum_cck->fina_cnt,
+			 delta_cck->fina_cnt, max_cck->fina_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "plcp_err:",
+			 le32_to_cpu(cck->plcp_err), accum_cck->plcp_err,
+			 delta_cck->plcp_err, max_cck->plcp_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "crc32_err:",
+			 le32_to_cpu(cck->crc32_err), accum_cck->crc32_err,
+			 delta_cck->crc32_err, max_cck->crc32_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "overrun_err:",
+			 le32_to_cpu(cck->overrun_err),
+			 accum_cck->overrun_err, delta_cck->overrun_err,
+			 max_cck->overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "early_overrun_err:",
+			 le32_to_cpu(cck->early_overrun_err),
+			 accum_cck->early_overrun_err,
+			 delta_cck->early_overrun_err,
+			 max_cck->early_overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "crc32_good:",
+			 le32_to_cpu(cck->crc32_good), accum_cck->crc32_good,
+			 delta_cck->crc32_good, max_cck->crc32_good);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "false_alarm_cnt:",
+			 le32_to_cpu(cck->false_alarm_cnt),
+			 accum_cck->false_alarm_cnt,
+			 delta_cck->false_alarm_cnt, max_cck->false_alarm_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "fina_sync_err_cnt:",
+			 le32_to_cpu(cck->fina_sync_err_cnt),
+			 accum_cck->fina_sync_err_cnt,
+			 delta_cck->fina_sync_err_cnt,
+			 max_cck->fina_sync_err_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "sfd_timeout:",
+			 le32_to_cpu(cck->sfd_timeout),
+			 accum_cck->sfd_timeout, delta_cck->sfd_timeout,
+			 max_cck->sfd_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "fina_timeout:",
+			 le32_to_cpu(cck->fina_timeout),
+			 accum_cck->fina_timeout, delta_cck->fina_timeout,
+			 max_cck->fina_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "unresponded_rts:",
+			 le32_to_cpu(cck->unresponded_rts),
+			 accum_cck->unresponded_rts, delta_cck->unresponded_rts,
+			 max_cck->unresponded_rts);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "rxe_frame_lmt_ovrun:",
+			 le32_to_cpu(cck->rxe_frame_limit_overrun),
+			 accum_cck->rxe_frame_limit_overrun,
+			 delta_cck->rxe_frame_limit_overrun,
+			 max_cck->rxe_frame_limit_overrun);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "sent_ack_cnt:",
+			 le32_to_cpu(cck->sent_ack_cnt),
+			 accum_cck->sent_ack_cnt, delta_cck->sent_ack_cnt,
+			 max_cck->sent_ack_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "sent_cts_cnt:",
+			 le32_to_cpu(cck->sent_cts_cnt),
+			 accum_cck->sent_cts_cnt, delta_cck->sent_cts_cnt,
+			 max_cck->sent_cts_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "sent_ba_rsp_cnt:",
+			 le32_to_cpu(cck->sent_ba_rsp_cnt),
+			 accum_cck->sent_ba_rsp_cnt,
+			 delta_cck->sent_ba_rsp_cnt,
+			 max_cck->sent_ba_rsp_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "dsp_self_kill:",
+			 le32_to_cpu(cck->dsp_self_kill),
+			 accum_cck->dsp_self_kill, delta_cck->dsp_self_kill,
+			 max_cck->dsp_self_kill);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "mh_format_err:",
+			 le32_to_cpu(cck->mh_format_err),
+			 accum_cck->mh_format_err, delta_cck->mh_format_err,
+			 max_cck->mh_format_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "re_acq_main_rssi_sum:",
+			 le32_to_cpu(cck->re_acq_main_rssi_sum),
+			 accum_cck->re_acq_main_rssi_sum,
+			 delta_cck->re_acq_main_rssi_sum,
+			 max_cck->re_acq_main_rssi_sum);
+
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_header, "Statistics_Rx - GENERAL:");
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "bogus_cts:",
+			 le32_to_cpu(general->bogus_cts),
+			 accum_general->bogus_cts, delta_general->bogus_cts,
+			 max_general->bogus_cts);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "bogus_ack:",
+			 le32_to_cpu(general->bogus_ack),
+			 accum_general->bogus_ack, delta_general->bogus_ack,
+			 max_general->bogus_ack);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "non_bssid_frames:",
+			 le32_to_cpu(general->non_bssid_frames),
+			 accum_general->non_bssid_frames,
+			 delta_general->non_bssid_frames,
+			 max_general->non_bssid_frames);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "filtered_frames:",
+			 le32_to_cpu(general->filtered_frames),
+			 accum_general->filtered_frames,
+			 delta_general->filtered_frames,
+			 max_general->filtered_frames);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "non_channel_beacons:",
+			 le32_to_cpu(general->non_channel_beacons),
+			 accum_general->non_channel_beacons,
+			 delta_general->non_channel_beacons,
+			 max_general->non_channel_beacons);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "channel_beacons:",
+			 le32_to_cpu(general->channel_beacons),
+			 accum_general->channel_beacons,
+			 delta_general->channel_beacons,
+			 max_general->channel_beacons);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "num_missed_bcon:",
+			 le32_to_cpu(general->num_missed_bcon),
+			 accum_general->num_missed_bcon,
+			 delta_general->num_missed_bcon,
+			 max_general->num_missed_bcon);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "adc_rx_saturation_time:",
+			 le32_to_cpu(general->adc_rx_saturation_time),
+			 accum_general->adc_rx_saturation_time,
+			 delta_general->adc_rx_saturation_time,
+			 max_general->adc_rx_saturation_time);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "ina_detect_search_tm:",
+			 le32_to_cpu(general->ina_detection_search_time),
+			 accum_general->ina_detection_search_time,
+			 delta_general->ina_detection_search_time,
+			 max_general->ina_detection_search_time);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "beacon_silence_rssi_a:",
+			 le32_to_cpu(general->beacon_silence_rssi_a),
+			 accum_general->beacon_silence_rssi_a,
+			 delta_general->beacon_silence_rssi_a,
+			 max_general->beacon_silence_rssi_a);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "beacon_silence_rssi_b:",
+			 le32_to_cpu(general->beacon_silence_rssi_b),
+			 accum_general->beacon_silence_rssi_b,
+			 delta_general->beacon_silence_rssi_b,
+			 max_general->beacon_silence_rssi_b);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "beacon_silence_rssi_c:",
+			 le32_to_cpu(general->beacon_silence_rssi_c),
+			 accum_general->beacon_silence_rssi_c,
+			 delta_general->beacon_silence_rssi_c,
+			 max_general->beacon_silence_rssi_c);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "interference_data_flag:",
+			 le32_to_cpu(general->interference_data_flag),
+			 accum_general->interference_data_flag,
+			 delta_general->interference_data_flag,
+			 max_general->interference_data_flag);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "channel_load:",
+			 le32_to_cpu(general->channel_load),
+			 accum_general->channel_load,
+			 delta_general->channel_load,
+			 max_general->channel_load);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "dsp_false_alarms:",
+			 le32_to_cpu(general->dsp_false_alarms),
+			 accum_general->dsp_false_alarms,
+			 delta_general->dsp_false_alarms,
+			 max_general->dsp_false_alarms);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "beacon_rssi_a:",
+			 le32_to_cpu(general->beacon_rssi_a),
+			 accum_general->beacon_rssi_a,
+			 delta_general->beacon_rssi_a,
+			 max_general->beacon_rssi_a);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "beacon_rssi_b:",
+			 le32_to_cpu(general->beacon_rssi_b),
+			 accum_general->beacon_rssi_b,
+			 delta_general->beacon_rssi_b,
+			 max_general->beacon_rssi_b);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "beacon_rssi_c:",
+			 le32_to_cpu(general->beacon_rssi_c),
+			 accum_general->beacon_rssi_c,
+			 delta_general->beacon_rssi_c,
+			 max_general->beacon_rssi_c);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "beacon_energy_a:",
+			 le32_to_cpu(general->beacon_energy_a),
+			 accum_general->beacon_energy_a,
+			 delta_general->beacon_energy_a,
+			 max_general->beacon_energy_a);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "beacon_energy_b:",
+			 le32_to_cpu(general->beacon_energy_b),
+			 accum_general->beacon_energy_b,
+			 delta_general->beacon_energy_b,
+			 max_general->beacon_energy_b);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "beacon_energy_c:",
+			 le32_to_cpu(general->beacon_energy_c),
+			 accum_general->beacon_energy_c,
+			 delta_general->beacon_energy_c,
+			 max_general->beacon_energy_c);
+
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_header, "Statistics_Rx - OFDM_HT:");
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "plcp_err:",
+			 le32_to_cpu(ht->plcp_err), accum_ht->plcp_err,
+			 delta_ht->plcp_err, max_ht->plcp_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "overrun_err:",
+			 le32_to_cpu(ht->overrun_err), accum_ht->overrun_err,
+			 delta_ht->overrun_err, max_ht->overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "early_overrun_err:",
+			 le32_to_cpu(ht->early_overrun_err),
+			 accum_ht->early_overrun_err,
+			 delta_ht->early_overrun_err,
+			 max_ht->early_overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "crc32_good:",
+			 le32_to_cpu(ht->crc32_good), accum_ht->crc32_good,
+			 delta_ht->crc32_good, max_ht->crc32_good);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "crc32_err:",
+			 le32_to_cpu(ht->crc32_err), accum_ht->crc32_err,
+			 delta_ht->crc32_err, max_ht->crc32_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "mh_format_err:",
+			 le32_to_cpu(ht->mh_format_err),
+			 accum_ht->mh_format_err,
+			 delta_ht->mh_format_err, max_ht->mh_format_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "agg_crc32_good:",
+			 le32_to_cpu(ht->agg_crc32_good),
+			 accum_ht->agg_crc32_good,
+			 delta_ht->agg_crc32_good, max_ht->agg_crc32_good);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "agg_mpdu_cnt:",
+			 le32_to_cpu(ht->agg_mpdu_cnt),
+			 accum_ht->agg_mpdu_cnt,
+			 delta_ht->agg_mpdu_cnt, max_ht->agg_mpdu_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "agg_cnt:",
+			 le32_to_cpu(ht->agg_cnt), accum_ht->agg_cnt,
+			 delta_ht->agg_cnt, max_ht->agg_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "unsupport_mcs:",
+			 le32_to_cpu(ht->unsupport_mcs),
+			 accum_ht->unsupport_mcs,
+			 delta_ht->unsupport_mcs, max_ht->unsupport_mcs);
+
+	spin_unlock_bh(&priv->statistics.lock);
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+	kfree(buf);
+	return ret;
+}
+
+static ssize_t iwl_dbgfs_ucode_tx_stats_read(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	int pos = 0;
+	char *buf;
+	int bufsz = (sizeof(struct statistics_tx) * 48) + 250;
+	ssize_t ret;
+	struct statistics_tx *tx, *accum_tx, *delta_tx, *max_tx;
+
+	if (!iwl_is_alive(priv))
+		return -EAGAIN;
+
+	buf = kzalloc(bufsz, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	/* the statistic information display here is based on
+	 * the last statistics notification from uCode
+	 * might not reflect the current uCode activity
+	 */
+	spin_lock_bh(&priv->statistics.lock);
+
+	tx = &priv->statistics.tx;
+	accum_tx = &priv->accum_stats.tx;
+	delta_tx = &priv->delta_stats.tx;
+	max_tx = &priv->max_delta_stats.tx;
+
+	pos += iwl_statistics_flag(priv, buf, bufsz);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_header, "Statistics_Tx:");
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "preamble:",
+			 le32_to_cpu(tx->preamble_cnt),
+			 accum_tx->preamble_cnt,
+			 delta_tx->preamble_cnt, max_tx->preamble_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "rx_detected_cnt:",
+			 le32_to_cpu(tx->rx_detected_cnt),
+			 accum_tx->rx_detected_cnt,
+			 delta_tx->rx_detected_cnt, max_tx->rx_detected_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "bt_prio_defer_cnt:",
+			 le32_to_cpu(tx->bt_prio_defer_cnt),
+			 accum_tx->bt_prio_defer_cnt,
+			 delta_tx->bt_prio_defer_cnt,
+			 max_tx->bt_prio_defer_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "bt_prio_kill_cnt:",
+			 le32_to_cpu(tx->bt_prio_kill_cnt),
+			 accum_tx->bt_prio_kill_cnt,
+			 delta_tx->bt_prio_kill_cnt,
+			 max_tx->bt_prio_kill_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "few_bytes_cnt:",
+			 le32_to_cpu(tx->few_bytes_cnt),
+			 accum_tx->few_bytes_cnt,
+			 delta_tx->few_bytes_cnt, max_tx->few_bytes_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "cts_timeout:",
+			 le32_to_cpu(tx->cts_timeout), accum_tx->cts_timeout,
+			 delta_tx->cts_timeout, max_tx->cts_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "ack_timeout:",
+			 le32_to_cpu(tx->ack_timeout),
+			 accum_tx->ack_timeout,
+			 delta_tx->ack_timeout, max_tx->ack_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "expected_ack_cnt:",
+			 le32_to_cpu(tx->expected_ack_cnt),
+			 accum_tx->expected_ack_cnt,
+			 delta_tx->expected_ack_cnt,
+			 max_tx->expected_ack_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "actual_ack_cnt:",
+			 le32_to_cpu(tx->actual_ack_cnt),
+			 accum_tx->actual_ack_cnt,
+			 delta_tx->actual_ack_cnt,
+			 max_tx->actual_ack_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "dump_msdu_cnt:",
+			 le32_to_cpu(tx->dump_msdu_cnt),
+			 accum_tx->dump_msdu_cnt,
+			 delta_tx->dump_msdu_cnt,
+			 max_tx->dump_msdu_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "abort_nxt_frame_mismatch:",
+			 le32_to_cpu(tx->burst_abort_next_frame_mismatch_cnt),
+			 accum_tx->burst_abort_next_frame_mismatch_cnt,
+			 delta_tx->burst_abort_next_frame_mismatch_cnt,
+			 max_tx->burst_abort_next_frame_mismatch_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "abort_missing_nxt_frame:",
+			 le32_to_cpu(tx->burst_abort_missing_next_frame_cnt),
+			 accum_tx->burst_abort_missing_next_frame_cnt,
+			 delta_tx->burst_abort_missing_next_frame_cnt,
+			 max_tx->burst_abort_missing_next_frame_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "cts_timeout_collision:",
+			 le32_to_cpu(tx->cts_timeout_collision),
+			 accum_tx->cts_timeout_collision,
+			 delta_tx->cts_timeout_collision,
+			 max_tx->cts_timeout_collision);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "ack_ba_timeout_collision:",
+			 le32_to_cpu(tx->ack_or_ba_timeout_collision),
+			 accum_tx->ack_or_ba_timeout_collision,
+			 delta_tx->ack_or_ba_timeout_collision,
+			 max_tx->ack_or_ba_timeout_collision);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "agg ba_timeout:",
+			 le32_to_cpu(tx->agg.ba_timeout),
+			 accum_tx->agg.ba_timeout,
+			 delta_tx->agg.ba_timeout,
+			 max_tx->agg.ba_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "agg ba_resched_frames:",
+			 le32_to_cpu(tx->agg.ba_reschedule_frames),
+			 accum_tx->agg.ba_reschedule_frames,
+			 delta_tx->agg.ba_reschedule_frames,
+			 max_tx->agg.ba_reschedule_frames);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "agg scd_query_agg_frame:",
+			 le32_to_cpu(tx->agg.scd_query_agg_frame_cnt),
+			 accum_tx->agg.scd_query_agg_frame_cnt,
+			 delta_tx->agg.scd_query_agg_frame_cnt,
+			 max_tx->agg.scd_query_agg_frame_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "agg scd_query_no_agg:",
+			 le32_to_cpu(tx->agg.scd_query_no_agg),
+			 accum_tx->agg.scd_query_no_agg,
+			 delta_tx->agg.scd_query_no_agg,
+			 max_tx->agg.scd_query_no_agg);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "agg scd_query_agg:",
+			 le32_to_cpu(tx->agg.scd_query_agg),
+			 accum_tx->agg.scd_query_agg,
+			 delta_tx->agg.scd_query_agg,
+			 max_tx->agg.scd_query_agg);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "agg scd_query_mismatch:",
+			 le32_to_cpu(tx->agg.scd_query_mismatch),
+			 accum_tx->agg.scd_query_mismatch,
+			 delta_tx->agg.scd_query_mismatch,
+			 max_tx->agg.scd_query_mismatch);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "agg frame_not_ready:",
+			 le32_to_cpu(tx->agg.frame_not_ready),
+			 accum_tx->agg.frame_not_ready,
+			 delta_tx->agg.frame_not_ready,
+			 max_tx->agg.frame_not_ready);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "agg underrun:",
+			 le32_to_cpu(tx->agg.underrun),
+			 accum_tx->agg.underrun,
+			 delta_tx->agg.underrun, max_tx->agg.underrun);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "agg bt_prio_kill:",
+			 le32_to_cpu(tx->agg.bt_prio_kill),
+			 accum_tx->agg.bt_prio_kill,
+			 delta_tx->agg.bt_prio_kill,
+			 max_tx->agg.bt_prio_kill);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "agg rx_ba_rsp_cnt:",
+			 le32_to_cpu(tx->agg.rx_ba_rsp_cnt),
+			 accum_tx->agg.rx_ba_rsp_cnt,
+			 delta_tx->agg.rx_ba_rsp_cnt,
+			 max_tx->agg.rx_ba_rsp_cnt);
+
+	if (tx->tx_power.ant_a || tx->tx_power.ant_b || tx->tx_power.ant_c) {
+		pos += scnprintf(buf + pos, bufsz - pos,
+			"tx power: (1/2 dB step)\n");
+		if ((priv->eeprom_data->valid_tx_ant & ANT_A) &&
+		    tx->tx_power.ant_a)
+			pos += scnprintf(buf + pos, bufsz - pos,
+					fmt_hex, "antenna A:",
+					tx->tx_power.ant_a);
+		if ((priv->eeprom_data->valid_tx_ant & ANT_B) &&
+		    tx->tx_power.ant_b)
+			pos += scnprintf(buf + pos, bufsz - pos,
+					fmt_hex, "antenna B:",
+					tx->tx_power.ant_b);
+		if ((priv->eeprom_data->valid_tx_ant & ANT_C) &&
+		    tx->tx_power.ant_c)
+			pos += scnprintf(buf + pos, bufsz - pos,
+					fmt_hex, "antenna C:",
+					tx->tx_power.ant_c);
+	}
+
+	spin_unlock_bh(&priv->statistics.lock);
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+	kfree(buf);
+	return ret;
+}
+
+static ssize_t iwl_dbgfs_ucode_general_stats_read(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	int pos = 0;
+	char *buf;
+	int bufsz = sizeof(struct statistics_general) * 10 + 300;
+	ssize_t ret;
+	struct statistics_general_common *general, *accum_general;
+	struct statistics_general_common *delta_general, *max_general;
+	struct statistics_dbg *dbg, *accum_dbg, *delta_dbg, *max_dbg;
+	struct statistics_div *div, *accum_div, *delta_div, *max_div;
+
+	if (!iwl_is_alive(priv))
+		return -EAGAIN;
+
+	buf = kzalloc(bufsz, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	/* the statistic information display here is based on
+	 * the last statistics notification from uCode
+	 * might not reflect the current uCode activity
+	 */
+
+	spin_lock_bh(&priv->statistics.lock);
+
+	general = &priv->statistics.common;
+	dbg = &priv->statistics.common.dbg;
+	div = &priv->statistics.common.div;
+	accum_general = &priv->accum_stats.common;
+	accum_dbg = &priv->accum_stats.common.dbg;
+	accum_div = &priv->accum_stats.common.div;
+	delta_general = &priv->delta_stats.common;
+	max_general = &priv->max_delta_stats.common;
+	delta_dbg = &priv->delta_stats.common.dbg;
+	max_dbg = &priv->max_delta_stats.common.dbg;
+	delta_div = &priv->delta_stats.common.div;
+	max_div = &priv->max_delta_stats.common.div;
+
+	pos += iwl_statistics_flag(priv, buf, bufsz);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_header, "Statistics_General:");
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_value, "temperature:",
+			 le32_to_cpu(general->temperature));
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_value, "temperature_m:",
+			 le32_to_cpu(general->temperature_m));
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_value, "ttl_timestamp:",
+			 le32_to_cpu(general->ttl_timestamp));
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "burst_check:",
+			 le32_to_cpu(dbg->burst_check),
+			 accum_dbg->burst_check,
+			 delta_dbg->burst_check, max_dbg->burst_check);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "burst_count:",
+			 le32_to_cpu(dbg->burst_count),
+			 accum_dbg->burst_count,
+			 delta_dbg->burst_count, max_dbg->burst_count);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "wait_for_silence_timeout_count:",
+			 le32_to_cpu(dbg->wait_for_silence_timeout_cnt),
+			 accum_dbg->wait_for_silence_timeout_cnt,
+			 delta_dbg->wait_for_silence_timeout_cnt,
+			 max_dbg->wait_for_silence_timeout_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "sleep_time:",
+			 le32_to_cpu(general->sleep_time),
+			 accum_general->sleep_time,
+			 delta_general->sleep_time, max_general->sleep_time);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "slots_out:",
+			 le32_to_cpu(general->slots_out),
+			 accum_general->slots_out,
+			 delta_general->slots_out, max_general->slots_out);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "slots_idle:",
+			 le32_to_cpu(general->slots_idle),
+			 accum_general->slots_idle,
+			 delta_general->slots_idle, max_general->slots_idle);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "tx_on_a:",
+			 le32_to_cpu(div->tx_on_a), accum_div->tx_on_a,
+			 delta_div->tx_on_a, max_div->tx_on_a);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "tx_on_b:",
+			 le32_to_cpu(div->tx_on_b), accum_div->tx_on_b,
+			 delta_div->tx_on_b, max_div->tx_on_b);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "exec_time:",
+			 le32_to_cpu(div->exec_time), accum_div->exec_time,
+			 delta_div->exec_time, max_div->exec_time);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "probe_time:",
+			 le32_to_cpu(div->probe_time), accum_div->probe_time,
+			 delta_div->probe_time, max_div->probe_time);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "rx_enable_counter:",
+			 le32_to_cpu(general->rx_enable_counter),
+			 accum_general->rx_enable_counter,
+			 delta_general->rx_enable_counter,
+			 max_general->rx_enable_counter);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 fmt_table, "num_of_sos_states:",
+			 le32_to_cpu(general->num_of_sos_states),
+			 accum_general->num_of_sos_states,
+			 delta_general->num_of_sos_states,
+			 max_general->num_of_sos_states);
+
+	spin_unlock_bh(&priv->statistics.lock);
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+	kfree(buf);
+	return ret;
+}
+
+static ssize_t iwl_dbgfs_ucode_bt_stats_read(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	int pos = 0;
+	char *buf;
+	int bufsz = (sizeof(struct statistics_bt_activity) * 24) + 200;
+	ssize_t ret;
+	struct statistics_bt_activity *bt, *accum_bt;
+
+	if (!iwl_is_alive(priv))
+		return -EAGAIN;
+
+	if (!priv->bt_enable_flag)
+		return -EINVAL;
+
+	/* make request to uCode to retrieve statistics information */
+	mutex_lock(&priv->mutex);
+	ret = iwl_send_statistics_request(priv, CMD_SYNC, false);
+	mutex_unlock(&priv->mutex);
+
+	if (ret)
+		return -EAGAIN;
+	buf = kzalloc(bufsz, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	/*
+	 * the statistic information display here is based on
+	 * the last statistics notification from uCode
+	 * might not reflect the current uCode activity
+	 */
+
+	spin_lock_bh(&priv->statistics.lock);
+
+	bt = &priv->statistics.bt_activity;
+	accum_bt = &priv->accum_stats.bt_activity;
+
+	pos += iwl_statistics_flag(priv, buf, bufsz);
+	pos += scnprintf(buf + pos, bufsz - pos, "Statistics_BT:\n");
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"\t\t\tcurrent\t\t\taccumulative\n");
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "hi_priority_tx_req_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(bt->hi_priority_tx_req_cnt),
+			 accum_bt->hi_priority_tx_req_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "hi_priority_tx_denied_cnt:\t%u\t\t\t%u\n",
+			 le32_to_cpu(bt->hi_priority_tx_denied_cnt),
+			 accum_bt->hi_priority_tx_denied_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "lo_priority_tx_req_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(bt->lo_priority_tx_req_cnt),
+			 accum_bt->lo_priority_tx_req_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "lo_priority_tx_denied_cnt:\t%u\t\t\t%u\n",
+			 le32_to_cpu(bt->lo_priority_tx_denied_cnt),
+			 accum_bt->lo_priority_tx_denied_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "hi_priority_rx_req_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(bt->hi_priority_rx_req_cnt),
+			 accum_bt->hi_priority_rx_req_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "hi_priority_rx_denied_cnt:\t%u\t\t\t%u\n",
+			 le32_to_cpu(bt->hi_priority_rx_denied_cnt),
+			 accum_bt->hi_priority_rx_denied_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "lo_priority_rx_req_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(bt->lo_priority_rx_req_cnt),
+			 accum_bt->lo_priority_rx_req_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "lo_priority_rx_denied_cnt:\t%u\t\t\t%u\n",
+			 le32_to_cpu(bt->lo_priority_rx_denied_cnt),
+			 accum_bt->lo_priority_rx_denied_cnt);
+
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "(rx)num_bt_kills:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(priv->statistics.num_bt_kills),
+			 priv->statistics.accum_num_bt_kills);
+
+	spin_unlock_bh(&priv->statistics.lock);
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+	kfree(buf);
+	return ret;
+}
+
+static ssize_t iwl_dbgfs_reply_tx_error_read(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	int pos = 0;
+	char *buf;
+	int bufsz = (sizeof(struct reply_tx_error_statistics) * 24) +
+		(sizeof(struct reply_agg_tx_error_statistics) * 24) + 200;
+	ssize_t ret;
+
+	if (!iwl_is_alive(priv))
+		return -EAGAIN;
+
+	buf = kzalloc(bufsz, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	pos += scnprintf(buf + pos, bufsz - pos, "Statistics_TX_Error:\n");
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t\t%u\n",
+			 iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_DELAY),
+			 priv->reply_tx_stats.pp_delay);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_FEW_BYTES),
+			 priv->reply_tx_stats.pp_few_bytes);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_BT_PRIO),
+			 priv->reply_tx_stats.pp_bt_prio);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_QUIET_PERIOD),
+			 priv->reply_tx_stats.pp_quiet_period);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_tx_fail_reason(TX_STATUS_POSTPONE_CALC_TTAK),
+			 priv->reply_tx_stats.pp_calc_ttak);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n",
+			 iwl_get_tx_fail_reason(
+				TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY),
+			 priv->reply_tx_stats.int_crossed_retry);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_tx_fail_reason(TX_STATUS_FAIL_SHORT_LIMIT),
+			 priv->reply_tx_stats.short_limit);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_tx_fail_reason(TX_STATUS_FAIL_LONG_LIMIT),
+			 priv->reply_tx_stats.long_limit);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_tx_fail_reason(TX_STATUS_FAIL_FIFO_UNDERRUN),
+			 priv->reply_tx_stats.fifo_underrun);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_tx_fail_reason(TX_STATUS_FAIL_DRAIN_FLOW),
+			 priv->reply_tx_stats.drain_flow);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_tx_fail_reason(TX_STATUS_FAIL_RFKILL_FLUSH),
+			 priv->reply_tx_stats.rfkill_flush);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_tx_fail_reason(TX_STATUS_FAIL_LIFE_EXPIRE),
+			 priv->reply_tx_stats.life_expire);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_tx_fail_reason(TX_STATUS_FAIL_DEST_PS),
+			 priv->reply_tx_stats.dest_ps);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_tx_fail_reason(TX_STATUS_FAIL_HOST_ABORTED),
+			 priv->reply_tx_stats.host_abort);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_tx_fail_reason(TX_STATUS_FAIL_BT_RETRY),
+			 priv->reply_tx_stats.pp_delay);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_tx_fail_reason(TX_STATUS_FAIL_STA_INVALID),
+			 priv->reply_tx_stats.sta_invalid);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_tx_fail_reason(TX_STATUS_FAIL_FRAG_DROPPED),
+			 priv->reply_tx_stats.frag_drop);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_tx_fail_reason(TX_STATUS_FAIL_TID_DISABLE),
+			 priv->reply_tx_stats.tid_disable);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_tx_fail_reason(TX_STATUS_FAIL_FIFO_FLUSHED),
+			 priv->reply_tx_stats.fifo_flush);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n",
+			 iwl_get_tx_fail_reason(
+				TX_STATUS_FAIL_INSUFFICIENT_CF_POLL),
+			 priv->reply_tx_stats.insuff_cf_poll);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_tx_fail_reason(TX_STATUS_FAIL_PASSIVE_NO_RX),
+			 priv->reply_tx_stats.fail_hw_drop);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n",
+			 iwl_get_tx_fail_reason(
+				TX_STATUS_FAIL_NO_BEACON_ON_RADAR),
+			 priv->reply_tx_stats.sta_color_mismatch);
+	pos += scnprintf(buf + pos, bufsz - pos, "UNKNOWN:\t\t\t%u\n",
+			 priv->reply_tx_stats.unknown);
+
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "\nStatistics_Agg_TX_Error:\n");
+
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_agg_tx_fail_reason(AGG_TX_STATE_UNDERRUN_MSK),
+			 priv->reply_agg_tx_stats.underrun);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_agg_tx_fail_reason(AGG_TX_STATE_BT_PRIO_MSK),
+			 priv->reply_agg_tx_stats.bt_prio);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_agg_tx_fail_reason(AGG_TX_STATE_FEW_BYTES_MSK),
+			 priv->reply_agg_tx_stats.few_bytes);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_agg_tx_fail_reason(AGG_TX_STATE_ABORT_MSK),
+			 priv->reply_agg_tx_stats.abort);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n",
+			 iwl_get_agg_tx_fail_reason(
+				AGG_TX_STATE_LAST_SENT_TTL_MSK),
+			 priv->reply_agg_tx_stats.last_sent_ttl);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n",
+			 iwl_get_agg_tx_fail_reason(
+				AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK),
+			 priv->reply_agg_tx_stats.last_sent_try);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n",
+			 iwl_get_agg_tx_fail_reason(
+				AGG_TX_STATE_LAST_SENT_BT_KILL_MSK),
+			 priv->reply_agg_tx_stats.last_sent_bt_kill);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_agg_tx_fail_reason(AGG_TX_STATE_SCD_QUERY_MSK),
+			 priv->reply_agg_tx_stats.scd_query);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t%u\n",
+			 iwl_get_agg_tx_fail_reason(
+				AGG_TX_STATE_TEST_BAD_CRC32_MSK),
+			 priv->reply_agg_tx_stats.bad_crc32);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_agg_tx_fail_reason(AGG_TX_STATE_RESPONSE_MSK),
+			 priv->reply_agg_tx_stats.response);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_agg_tx_fail_reason(AGG_TX_STATE_DUMP_TX_MSK),
+			 priv->reply_agg_tx_stats.dump_tx);
+	pos += scnprintf(buf + pos, bufsz - pos, "%s:\t\t\t%u\n",
+			 iwl_get_agg_tx_fail_reason(AGG_TX_STATE_DELAY_TX_MSK),
+			 priv->reply_agg_tx_stats.delay_tx);
+	pos += scnprintf(buf + pos, bufsz - pos, "UNKNOWN:\t\t\t%u\n",
+			 priv->reply_agg_tx_stats.unknown);
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+	kfree(buf);
+	return ret;
+}
+
+static ssize_t iwl_dbgfs_sensitivity_read(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos) {
+
+	struct iwl_priv *priv = file->private_data;
+	int pos = 0;
+	int cnt = 0;
+	char *buf;
+	int bufsz = sizeof(struct iwl_sensitivity_data) * 4 + 100;
+	ssize_t ret;
+	struct iwl_sensitivity_data *data;
+
+	data = &priv->sensitivity_data;
+	buf = kzalloc(bufsz, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	pos += scnprintf(buf + pos, bufsz - pos, "auto_corr_ofdm:\t\t\t %u\n",
+			data->auto_corr_ofdm);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"auto_corr_ofdm_mrc:\t\t %u\n",
+			data->auto_corr_ofdm_mrc);
+	pos += scnprintf(buf + pos, bufsz - pos, "auto_corr_ofdm_x1:\t\t %u\n",
+			data->auto_corr_ofdm_x1);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"auto_corr_ofdm_mrc_x1:\t\t %u\n",
+			data->auto_corr_ofdm_mrc_x1);
+	pos += scnprintf(buf + pos, bufsz - pos, "auto_corr_cck:\t\t\t %u\n",
+			data->auto_corr_cck);
+	pos += scnprintf(buf + pos, bufsz - pos, "auto_corr_cck_mrc:\t\t %u\n",
+			data->auto_corr_cck_mrc);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"last_bad_plcp_cnt_ofdm:\t\t %u\n",
+			data->last_bad_plcp_cnt_ofdm);
+	pos += scnprintf(buf + pos, bufsz - pos, "last_fa_cnt_ofdm:\t\t %u\n",
+			data->last_fa_cnt_ofdm);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"last_bad_plcp_cnt_cck:\t\t %u\n",
+			data->last_bad_plcp_cnt_cck);
+	pos += scnprintf(buf + pos, bufsz - pos, "last_fa_cnt_cck:\t\t %u\n",
+			data->last_fa_cnt_cck);
+	pos += scnprintf(buf + pos, bufsz - pos, "nrg_curr_state:\t\t\t %u\n",
+			data->nrg_curr_state);
+	pos += scnprintf(buf + pos, bufsz - pos, "nrg_prev_state:\t\t\t %u\n",
+			data->nrg_prev_state);
+	pos += scnprintf(buf + pos, bufsz - pos, "nrg_value:\t\t\t");
+	for (cnt = 0; cnt < 10; cnt++) {
+		pos += scnprintf(buf + pos, bufsz - pos, " %u",
+				data->nrg_value[cnt]);
+	}
+	pos += scnprintf(buf + pos, bufsz - pos, "\n");
+	pos += scnprintf(buf + pos, bufsz - pos, "nrg_silence_rssi:\t\t");
+	for (cnt = 0; cnt < NRG_NUM_PREV_STAT_L; cnt++) {
+		pos += scnprintf(buf + pos, bufsz - pos, " %u",
+				data->nrg_silence_rssi[cnt]);
+	}
+	pos += scnprintf(buf + pos, bufsz - pos, "\n");
+	pos += scnprintf(buf + pos, bufsz - pos, "nrg_silence_ref:\t\t %u\n",
+			data->nrg_silence_ref);
+	pos += scnprintf(buf + pos, bufsz - pos, "nrg_energy_idx:\t\t\t %u\n",
+			data->nrg_energy_idx);
+	pos += scnprintf(buf + pos, bufsz - pos, "nrg_silence_idx:\t\t %u\n",
+			data->nrg_silence_idx);
+	pos += scnprintf(buf + pos, bufsz - pos, "nrg_th_cck:\t\t\t %u\n",
+			data->nrg_th_cck);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"nrg_auto_corr_silence_diff:\t %u\n",
+			data->nrg_auto_corr_silence_diff);
+	pos += scnprintf(buf + pos, bufsz - pos, "num_in_cck_no_fa:\t\t %u\n",
+			data->num_in_cck_no_fa);
+	pos += scnprintf(buf + pos, bufsz - pos, "nrg_th_ofdm:\t\t\t %u\n",
+			data->nrg_th_ofdm);
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+	kfree(buf);
+	return ret;
+}
+
+
+static ssize_t iwl_dbgfs_chain_noise_read(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos) {
+
+	struct iwl_priv *priv = file->private_data;
+	int pos = 0;
+	int cnt = 0;
+	char *buf;
+	int bufsz = sizeof(struct iwl_chain_noise_data) * 4 + 100;
+	ssize_t ret;
+	struct iwl_chain_noise_data *data;
+
+	data = &priv->chain_noise_data;
+	buf = kzalloc(bufsz, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	pos += scnprintf(buf + pos, bufsz - pos, "active_chains:\t\t\t %u\n",
+			data->active_chains);
+	pos += scnprintf(buf + pos, bufsz - pos, "chain_noise_a:\t\t\t %u\n",
+			data->chain_noise_a);
+	pos += scnprintf(buf + pos, bufsz - pos, "chain_noise_b:\t\t\t %u\n",
+			data->chain_noise_b);
+	pos += scnprintf(buf + pos, bufsz - pos, "chain_noise_c:\t\t\t %u\n",
+			data->chain_noise_c);
+	pos += scnprintf(buf + pos, bufsz - pos, "chain_signal_a:\t\t\t %u\n",
+			data->chain_signal_a);
+	pos += scnprintf(buf + pos, bufsz - pos, "chain_signal_b:\t\t\t %u\n",
+			data->chain_signal_b);
+	pos += scnprintf(buf + pos, bufsz - pos, "chain_signal_c:\t\t\t %u\n",
+			data->chain_signal_c);
+	pos += scnprintf(buf + pos, bufsz - pos, "beacon_count:\t\t\t %u\n",
+			data->beacon_count);
+
+	pos += scnprintf(buf + pos, bufsz - pos, "disconn_array:\t\t\t");
+	for (cnt = 0; cnt < NUM_RX_CHAINS; cnt++) {
+		pos += scnprintf(buf + pos, bufsz - pos, " %u",
+				data->disconn_array[cnt]);
+	}
+	pos += scnprintf(buf + pos, bufsz - pos, "\n");
+	pos += scnprintf(buf + pos, bufsz - pos, "delta_gain_code:\t\t");
+	for (cnt = 0; cnt < NUM_RX_CHAINS; cnt++) {
+		pos += scnprintf(buf + pos, bufsz - pos, " %u",
+				data->delta_gain_code[cnt]);
+	}
+	pos += scnprintf(buf + pos, bufsz - pos, "\n");
+	pos += scnprintf(buf + pos, bufsz - pos, "radio_write:\t\t\t %u\n",
+			data->radio_write);
+	pos += scnprintf(buf + pos, bufsz - pos, "state:\t\t\t\t %u\n",
+			data->state);
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+	kfree(buf);
+	return ret;
+}
+
+static ssize_t iwl_dbgfs_power_save_status_read(struct file *file,
+						    char __user *user_buf,
+						    size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	char buf[60];
+	int pos = 0;
+	const size_t bufsz = sizeof(buf);
+	u32 pwrsave_status;
+
+	pwrsave_status = iwl_read32(priv->trans, CSR_GP_CNTRL) &
+			CSR_GP_REG_POWER_SAVE_STATUS_MSK;
+
+	pos += scnprintf(buf + pos, bufsz - pos, "Power Save Status: ");
+	pos += scnprintf(buf + pos, bufsz - pos, "%s\n",
+		(pwrsave_status == CSR_GP_REG_NO_POWER_SAVE) ? "none" :
+		(pwrsave_status == CSR_GP_REG_MAC_POWER_SAVE) ? "MAC" :
+		(pwrsave_status == CSR_GP_REG_PHY_POWER_SAVE) ? "PHY" :
+		"error");
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
+static ssize_t iwl_dbgfs_clear_ucode_statistics_write(struct file *file,
+					 const char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	char buf[8];
+	int buf_size;
+	int clear;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) -  1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	if (sscanf(buf, "%d", &clear) != 1)
+		return -EFAULT;
+
+	/* make request to uCode to retrieve statistics information */
+	mutex_lock(&priv->mutex);
+	iwl_send_statistics_request(priv, CMD_SYNC, true);
+	mutex_unlock(&priv->mutex);
+
+	return count;
+}
+
+static ssize_t iwl_dbgfs_ucode_tracing_read(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos) {
+
+	struct iwl_priv *priv = file->private_data;
+	int pos = 0;
+	char buf[128];
+	const size_t bufsz = sizeof(buf);
+
+	pos += scnprintf(buf + pos, bufsz - pos, "ucode trace timer is %s\n",
+			priv->event_log.ucode_trace ? "On" : "Off");
+	pos += scnprintf(buf + pos, bufsz - pos, "non_wraps_count:\t\t %u\n",
+			priv->event_log.non_wraps_count);
+	pos += scnprintf(buf + pos, bufsz - pos, "wraps_once_count:\t\t %u\n",
+			priv->event_log.wraps_once_count);
+	pos += scnprintf(buf + pos, bufsz - pos, "wraps_more_count:\t\t %u\n",
+			priv->event_log.wraps_more_count);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
+static ssize_t iwl_dbgfs_ucode_tracing_write(struct file *file,
+					 const char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	char buf[8];
+	int buf_size;
+	int trace;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) -  1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	if (sscanf(buf, "%d", &trace) != 1)
+		return -EFAULT;
+
+	if (trace) {
+		priv->event_log.ucode_trace = true;
+		if (iwl_is_alive(priv)) {
+			/* start collecting data now */
+			mod_timer(&priv->ucode_trace, jiffies);
+		}
+	} else {
+		priv->event_log.ucode_trace = false;
+		del_timer_sync(&priv->ucode_trace);
+	}
+
+	return count;
+}
+
+static ssize_t iwl_dbgfs_rxon_flags_read(struct file *file,
+					 char __user *user_buf,
+					 size_t count, loff_t *ppos) {
+
+	struct iwl_priv *priv = file->private_data;
+	int len = 0;
+	char buf[20];
+
+	len = sprintf(buf, "0x%04X\n",
+		le32_to_cpu(priv->contexts[IWL_RXON_CTX_BSS].active.flags));
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t iwl_dbgfs_rxon_filter_flags_read(struct file *file,
+						char __user *user_buf,
+						size_t count, loff_t *ppos) {
+
+	struct iwl_priv *priv = file->private_data;
+	int len = 0;
+	char buf[20];
+
+	len = sprintf(buf, "0x%04X\n",
+		le32_to_cpu(priv->contexts[IWL_RXON_CTX_BSS].active.filter_flags));
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t iwl_dbgfs_missed_beacon_read(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos) {
+
+	struct iwl_priv *priv = file->private_data;
+	int pos = 0;
+	char buf[12];
+	const size_t bufsz = sizeof(buf);
+
+	pos += scnprintf(buf + pos, bufsz - pos, "%d\n",
+			priv->missed_beacon_threshold);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
+static ssize_t iwl_dbgfs_missed_beacon_write(struct file *file,
+					 const char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	char buf[8];
+	int buf_size;
+	int missed;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) -  1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	if (sscanf(buf, "%d", &missed) != 1)
+		return -EINVAL;
+
+	if (missed < IWL_MISSED_BEACON_THRESHOLD_MIN ||
+	    missed > IWL_MISSED_BEACON_THRESHOLD_MAX)
+		priv->missed_beacon_threshold =
+			IWL_MISSED_BEACON_THRESHOLD_DEF;
+	else
+		priv->missed_beacon_threshold = missed;
+
+	return count;
+}
+
+static ssize_t iwl_dbgfs_plcp_delta_read(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos) {
+
+	struct iwl_priv *priv = file->private_data;
+	int pos = 0;
+	char buf[12];
+	const size_t bufsz = sizeof(buf);
+
+	pos += scnprintf(buf + pos, bufsz - pos, "%u\n",
+			priv->plcp_delta_threshold);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
+static ssize_t iwl_dbgfs_plcp_delta_write(struct file *file,
+					const char __user *user_buf,
+					size_t count, loff_t *ppos) {
+
+	struct iwl_priv *priv = file->private_data;
+	char buf[8];
+	int buf_size;
+	int plcp;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) -  1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	if (sscanf(buf, "%d", &plcp) != 1)
+		return -EINVAL;
+	if ((plcp < IWL_MAX_PLCP_ERR_THRESHOLD_MIN) ||
+		(plcp > IWL_MAX_PLCP_ERR_THRESHOLD_MAX))
+		priv->plcp_delta_threshold =
+			IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE;
+	else
+		priv->plcp_delta_threshold = plcp;
+	return count;
+}
+
+static ssize_t iwl_dbgfs_rf_reset_read(struct file *file,
+				       char __user *user_buf,
+				       size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	int pos = 0;
+	char buf[300];
+	const size_t bufsz = sizeof(buf);
+	struct iwl_rf_reset *rf_reset = &priv->rf_reset;
+
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"RF reset statistics\n");
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"\tnumber of reset request: %d\n",
+			rf_reset->reset_request_count);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"\tnumber of reset request success: %d\n",
+			rf_reset->reset_success_count);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"\tnumber of reset request reject: %d\n",
+			rf_reset->reset_reject_count);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
+static ssize_t iwl_dbgfs_rf_reset_write(struct file *file,
+					const char __user *user_buf,
+					size_t count, loff_t *ppos) {
+
+	struct iwl_priv *priv = file->private_data;
+	int ret;
+
+	ret = iwl_force_rf_reset(priv, true);
+	return ret ? ret : count;
+}
+
+static ssize_t iwl_dbgfs_txfifo_flush_write(struct file *file,
+					const char __user *user_buf,
+					size_t count, loff_t *ppos) {
+
+	struct iwl_priv *priv = file->private_data;
+	char buf[8];
+	int buf_size;
+	int flush;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) -  1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	if (sscanf(buf, "%d", &flush) != 1)
+		return -EINVAL;
+
+	if (iwl_is_rfkill(priv))
+		return -EFAULT;
+
+	iwlagn_dev_txfifo_flush(priv, IWL_DROP_ALL);
+
+	return count;
+}
+
+static ssize_t iwl_dbgfs_bt_traffic_read(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos) {
+
+	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	int pos = 0;
+	char buf[200];
+	const size_t bufsz = sizeof(buf);
+
+	if (!priv->bt_enable_flag) {
+		pos += scnprintf(buf + pos, bufsz - pos, "BT coex disabled\n");
+		return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+	}
+	pos += scnprintf(buf + pos, bufsz - pos, "BT enable flag: 0x%x\n",
+		priv->bt_enable_flag);
+	pos += scnprintf(buf + pos, bufsz - pos, "BT in %s mode\n",
+		priv->bt_full_concurrent ? "full concurrency" : "3-wire");
+	pos += scnprintf(buf + pos, bufsz - pos, "BT status: %s, "
+			 "last traffic notif: %d\n",
+		priv->bt_status ? "On" : "Off", priv->last_bt_traffic_load);
+	pos += scnprintf(buf + pos, bufsz - pos, "ch_announcement: %d, "
+			 "kill_ack_mask: %x, kill_cts_mask: %x\n",
+		priv->bt_ch_announce, priv->kill_ack_mask,
+		priv->kill_cts_mask);
+
+	pos += scnprintf(buf + pos, bufsz - pos, "bluetooth traffic load: ");
+	switch (priv->bt_traffic_load) {
+	case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
+		pos += scnprintf(buf + pos, bufsz - pos, "Continuous\n");
+		break;
+	case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
+		pos += scnprintf(buf + pos, bufsz - pos, "High\n");
+		break;
+	case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
+		pos += scnprintf(buf + pos, bufsz - pos, "Low\n");
+		break;
+	case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
+	default:
+		pos += scnprintf(buf + pos, bufsz - pos, "None\n");
+		break;
+	}
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
+static ssize_t iwl_dbgfs_protection_mode_read(struct file *file,
+					char __user *user_buf,
+					size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+
+	int pos = 0;
+	char buf[40];
+	const size_t bufsz = sizeof(buf);
+
+	if (priv->cfg->ht_params)
+		pos += scnprintf(buf + pos, bufsz - pos,
+			 "use %s for aggregation\n",
+			 (priv->hw_params.use_rts_for_aggregation) ?
+				"rts/cts" : "cts-to-self");
+	else
+		pos += scnprintf(buf + pos, bufsz - pos, "N/A");
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
+static ssize_t iwl_dbgfs_protection_mode_write(struct file *file,
+					const char __user *user_buf,
+					size_t count, loff_t *ppos) {
+
+	struct iwl_priv *priv = file->private_data;
+	char buf[8];
+	int buf_size;
+	int rts;
+
+	if (!priv->cfg->ht_params)
+		return -EINVAL;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) -  1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	if (sscanf(buf, "%d", &rts) != 1)
+		return -EINVAL;
+	if (rts)
+		priv->hw_params.use_rts_for_aggregation = true;
+	else
+		priv->hw_params.use_rts_for_aggregation = false;
+	return count;
+}
+
+static int iwl_cmd_echo_test(struct iwl_priv *priv)
+{
+	int ret;
+	struct iwl_host_cmd cmd = {
+		.id = REPLY_ECHO,
+		.len = { 0 },
+		.flags = CMD_SYNC,
+	};
+
+	ret = iwl_dvm_send_cmd(priv, &cmd);
+	if (ret)
+		IWL_ERR(priv, "echo testing fail: 0X%x\n", ret);
+	else
+		IWL_DEBUG_INFO(priv, "echo testing pass\n");
+	return ret;
+}
+
+static ssize_t iwl_dbgfs_echo_test_write(struct file *file,
+					const char __user *user_buf,
+					size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	char buf[8];
+	int buf_size;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) -  1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+
+	iwl_cmd_echo_test(priv);
+	return count;
+}
+
+static ssize_t iwl_dbgfs_log_event_read(struct file *file,
+					 char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	char *buf;
+	int pos = 0;
+	ssize_t ret = -ENOMEM;
+
+	ret = pos = iwl_dump_nic_event_log(priv, true, &buf, true);
+	if (buf) {
+		ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+		kfree(buf);
+	}
+	return ret;
+}
+
+static ssize_t iwl_dbgfs_log_event_write(struct file *file,
+					const char __user *user_buf,
+					size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	u32 event_log_flag;
+	char buf[8];
+	int buf_size;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) -  1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	if (sscanf(buf, "%d", &event_log_flag) != 1)
+		return -EFAULT;
+	if (event_log_flag == 1)
+		iwl_dump_nic_event_log(priv, true, NULL, false);
+
+	return count;
+}
+
+static ssize_t iwl_dbgfs_calib_disabled_read(struct file *file,
+					 char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	char buf[120];
+	int pos = 0;
+	const size_t bufsz = sizeof(buf);
+
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "Sensitivity calibrations %s\n",
+			 (priv->calib_disabled &
+					IWL_SENSITIVITY_CALIB_DISABLED) ?
+			 "DISABLED" : "ENABLED");
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "Chain noise calibrations %s\n",
+			 (priv->calib_disabled &
+					IWL_CHAIN_NOISE_CALIB_DISABLED) ?
+			 "DISABLED" : "ENABLED");
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "Tx power calibrations %s\n",
+			 (priv->calib_disabled &
+					IWL_TX_POWER_CALIB_DISABLED) ?
+			 "DISABLED" : "ENABLED");
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
+static ssize_t iwl_dbgfs_calib_disabled_write(struct file *file,
+					      const char __user *user_buf,
+					      size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	char buf[8];
+	u32 calib_disabled;
+	int buf_size;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) - 1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	if (sscanf(buf, "%x", &calib_disabled) != 1)
+		return -EFAULT;
+
+	priv->calib_disabled = calib_disabled;
+
+	return count;
+}
+
+DEBUGFS_READ_FILE_OPS(ucode_rx_stats);
+DEBUGFS_READ_FILE_OPS(ucode_tx_stats);
+DEBUGFS_READ_FILE_OPS(ucode_general_stats);
+DEBUGFS_READ_FILE_OPS(sensitivity);
+DEBUGFS_READ_FILE_OPS(chain_noise);
+DEBUGFS_READ_FILE_OPS(power_save_status);
+DEBUGFS_WRITE_FILE_OPS(clear_ucode_statistics);
+DEBUGFS_READ_WRITE_FILE_OPS(ucode_tracing);
+DEBUGFS_READ_WRITE_FILE_OPS(missed_beacon);
+DEBUGFS_READ_WRITE_FILE_OPS(plcp_delta);
+DEBUGFS_READ_WRITE_FILE_OPS(rf_reset);
+DEBUGFS_READ_FILE_OPS(rxon_flags);
+DEBUGFS_READ_FILE_OPS(rxon_filter_flags);
+DEBUGFS_WRITE_FILE_OPS(txfifo_flush);
+DEBUGFS_READ_FILE_OPS(ucode_bt_stats);
+DEBUGFS_READ_FILE_OPS(bt_traffic);
+DEBUGFS_READ_WRITE_FILE_OPS(protection_mode);
+DEBUGFS_READ_FILE_OPS(reply_tx_error);
+DEBUGFS_WRITE_FILE_OPS(echo_test);
+DEBUGFS_READ_WRITE_FILE_OPS(log_event);
+DEBUGFS_READ_WRITE_FILE_OPS(calib_disabled);
+
+/*
+ * Create the debugfs files and directories
+ *
+ */
+int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
+{
+	struct dentry *phyd = priv->hw->wiphy->debugfsdir;
+	struct dentry *dir_drv, *dir_data, *dir_rf, *dir_debug;
+
+	dir_drv = debugfs_create_dir(name, phyd);
+	if (!dir_drv)
+		return -ENOMEM;
+
+	priv->debugfs_dir = dir_drv;
+
+	dir_data = debugfs_create_dir("data", dir_drv);
+	if (!dir_data)
+		goto err;
+	dir_rf = debugfs_create_dir("rf", dir_drv);
+	if (!dir_rf)
+		goto err;
+	dir_debug = debugfs_create_dir("debug", dir_drv);
+	if (!dir_debug)
+		goto err;
+
+	DEBUGFS_ADD_FILE(nvm, dir_data, S_IRUSR);
+	DEBUGFS_ADD_FILE(sram, dir_data, S_IWUSR | S_IRUSR);
+	DEBUGFS_ADD_FILE(wowlan_sram, dir_data, S_IRUSR);
+	DEBUGFS_ADD_FILE(stations, dir_data, S_IRUSR);
+	DEBUGFS_ADD_FILE(channels, dir_data, S_IRUSR);
+	DEBUGFS_ADD_FILE(status, dir_data, S_IRUSR);
+	DEBUGFS_ADD_FILE(rx_handlers, dir_data, S_IWUSR | S_IRUSR);
+	DEBUGFS_ADD_FILE(qos, dir_data, S_IRUSR);
+	DEBUGFS_ADD_FILE(sleep_level_override, dir_data, S_IWUSR | S_IRUSR);
+	DEBUGFS_ADD_FILE(current_sleep_command, dir_data, S_IRUSR);
+	DEBUGFS_ADD_FILE(thermal_throttling, dir_data, S_IRUSR);
+	DEBUGFS_ADD_FILE(disable_ht40, dir_data, S_IWUSR | S_IRUSR);
+	DEBUGFS_ADD_FILE(temperature, dir_data, S_IRUSR);
+
+	DEBUGFS_ADD_FILE(power_save_status, dir_debug, S_IRUSR);
+	DEBUGFS_ADD_FILE(clear_ucode_statistics, dir_debug, S_IWUSR);
+	DEBUGFS_ADD_FILE(missed_beacon, dir_debug, S_IWUSR);
+	DEBUGFS_ADD_FILE(plcp_delta, dir_debug, S_IWUSR | S_IRUSR);
+	DEBUGFS_ADD_FILE(rf_reset, dir_debug, S_IWUSR | S_IRUSR);
+	DEBUGFS_ADD_FILE(ucode_rx_stats, dir_debug, S_IRUSR);
+	DEBUGFS_ADD_FILE(ucode_tx_stats, dir_debug, S_IRUSR);
+	DEBUGFS_ADD_FILE(ucode_general_stats, dir_debug, S_IRUSR);
+	DEBUGFS_ADD_FILE(txfifo_flush, dir_debug, S_IWUSR);
+	DEBUGFS_ADD_FILE(protection_mode, dir_debug, S_IWUSR | S_IRUSR);
+	DEBUGFS_ADD_FILE(sensitivity, dir_debug, S_IRUSR);
+	DEBUGFS_ADD_FILE(chain_noise, dir_debug, S_IRUSR);
+	DEBUGFS_ADD_FILE(ucode_tracing, dir_debug, S_IWUSR | S_IRUSR);
+	DEBUGFS_ADD_FILE(ucode_bt_stats, dir_debug, S_IRUSR);
+	DEBUGFS_ADD_FILE(reply_tx_error, dir_debug, S_IRUSR);
+	DEBUGFS_ADD_FILE(rxon_flags, dir_debug, S_IWUSR);
+	DEBUGFS_ADD_FILE(rxon_filter_flags, dir_debug, S_IWUSR);
+	DEBUGFS_ADD_FILE(echo_test, dir_debug, S_IWUSR);
+	DEBUGFS_ADD_FILE(log_event, dir_debug, S_IWUSR | S_IRUSR);
+
+	if (iwl_advanced_bt_coexist(priv))
+		DEBUGFS_ADD_FILE(bt_traffic, dir_debug, S_IRUSR);
+
+	/* Calibrations disabled/enabled status*/
+	DEBUGFS_ADD_FILE(calib_disabled, dir_rf, S_IWUSR | S_IRUSR);
+
+	if (iwl_trans_dbgfs_register(priv->trans, dir_debug))
+		goto err;
+	return 0;
+
+err:
+	IWL_ERR(priv, "Can't create the debugfs directory\n");
+	iwl_dbgfs_unregister(priv);
+	return -ENOMEM;
+}
+
+/**
+ * Remove the debugfs files and directories
+ *
+ */
+void iwl_dbgfs_unregister(struct iwl_priv *priv)
+{
+	if (!priv->debugfs_dir)
+		return;
+
+	debugfs_remove_recursive(priv->debugfs_dir);
+	priv->debugfs_dir = NULL;
+}
diff --git a/drivers/net/wireless/iwlwifi/dvm/dev.h b/drivers/net/wireless/iwlwifi/dvm/dev.h
new file mode 100644
index 00000000000..54cf085ddc8
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/dev.h
@@ -0,0 +1,933 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+/*
+ * Please use this file (dev.h) for driver implementation definitions.
+ * Please use commands.h for uCode API definitions.
+ */
+
+#ifndef __iwl_dev_h__
+#define __iwl_dev_h__
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/wait.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+
+#include "iwl-fw.h"
+#include "iwl-eeprom-parse.h"
+#include "iwl-csr.h"
+#include "iwl-debug.h"
+#include "iwl-agn-hw.h"
+#include "iwl-op-mode.h"
+#include "iwl-notif-wait.h"
+#include "iwl-trans.h"
+
+#include "led.h"
+#include "power.h"
+#include "rs.h"
+#include "tt.h"
+
+#include "iwl-test.h"
+
+/* CT-KILL constants */
+#define CT_KILL_THRESHOLD_LEGACY   110 /* in Celsius */
+#define CT_KILL_THRESHOLD	   114 /* in Celsius */
+#define CT_KILL_EXIT_THRESHOLD     95  /* in Celsius */
+
+/* Default noise level to report when noise measurement is not available.
+ *   This may be because we're:
+ *   1)  Not associated  no beacon statistics being sent to driver)
+ *   2)  Scanning (noise measurement does not apply to associated channel)
+ * Use default noise value of -127 ... this is below the range of measurable
+ *   Rx dBm for all agn devices, so it can indicate "unmeasurable" to user.
+ *   Also, -127 works better than 0 when averaging frames with/without
+ *   noise info (e.g. averaging might be done in app); measured dBm values are
+ *   always negative ... using a negative value as the default keeps all
+ *   averages within an s8's (used in some apps) range of negative values. */
+#define IWL_NOISE_MEAS_NOT_AVAILABLE (-127)
+
+/*
+ * RTS threshold here is total size [2347] minus 4 FCS bytes
+ * Per spec:
+ *   a value of 0 means RTS on all data/management packets
+ *   a value > max MSDU size means no RTS
+ * else RTS for data/management frames where MPDU is larger
+ *   than RTS value.
+ */
+#define DEFAULT_RTS_THRESHOLD     2347U
+#define MIN_RTS_THRESHOLD         0U
+#define MAX_RTS_THRESHOLD         2347U
+#define MAX_MSDU_SIZE		  2304U
+#define MAX_MPDU_SIZE		  2346U
+#define DEFAULT_BEACON_INTERVAL   200U
+#define	DEFAULT_SHORT_RETRY_LIMIT 7U
+#define	DEFAULT_LONG_RETRY_LIMIT  4U
+
+#define IWL_NUM_SCAN_RATES         (2)
+
+/*
+ * Minimum number of queues. MAX_NUM is defined in hw specific files.
+ * Set the minimum to accommodate
+ *  - 4 standard TX queues
+ *  - the command queue
+ *  - 4 PAN TX queues
+ *  - the PAN multicast queue, and
+ *  - the AUX (TX during scan dwell) queue.
+ */
+#define IWL_MIN_NUM_QUEUES	11
+
+/*
+ * Command queue depends on iPAN support.
+ */
+#define IWL_DEFAULT_CMD_QUEUE_NUM	4
+#define IWL_IPAN_CMD_QUEUE_NUM		9
+
+#define IEEE80211_DATA_LEN              2304
+#define IEEE80211_4ADDR_LEN             30
+#define IEEE80211_HLEN                  (IEEE80211_4ADDR_LEN)
+#define IEEE80211_FRAME_LEN             (IEEE80211_DATA_LEN + IEEE80211_HLEN)
+
+#define SUP_RATE_11A_MAX_NUM_CHANNELS  8
+#define SUP_RATE_11B_MAX_NUM_CHANNELS  4
+#define SUP_RATE_11G_MAX_NUM_CHANNELS  12
+
+#define IWL_SUPPORTED_RATES_IE_LEN         8
+
+#define IWL_INVALID_RATE     0xFF
+#define IWL_INVALID_VALUE    -1
+
+union iwl_ht_rate_supp {
+	u16 rates;
+	struct {
+		u8 siso_rate;
+		u8 mimo_rate;
+	};
+};
+
+struct iwl_ht_config {
+	bool single_chain_sufficient;
+	enum ieee80211_smps_mode smps; /* current smps mode */
+};
+
+/* QoS structures */
+struct iwl_qos_info {
+	int qos_active;
+	struct iwl_qosparam_cmd def_qos_parm;
+};
+
+/**
+ * enum iwl_agg_state
+ *
+ * The state machine of the BA agreement establishment / tear down.
+ * These states relate to a specific RA / TID.
+ *
+ * @IWL_AGG_OFF: aggregation is not used
+ * @IWL_AGG_STARTING: aggregation are starting (between start and oper)
+ * @IWL_AGG_ON: aggregation session is up
+ * @IWL_EMPTYING_HW_QUEUE_ADDBA: establishing a BA session - waiting for the
+ *	HW queue to be empty from packets for this RA /TID.
+ * @IWL_EMPTYING_HW_QUEUE_DELBA: tearing down a BA session - waiting for the
+ *	HW queue to be empty from packets for this RA /TID.
+ */
+enum iwl_agg_state {
+	IWL_AGG_OFF = 0,
+	IWL_AGG_STARTING,
+	IWL_AGG_ON,
+	IWL_EMPTYING_HW_QUEUE_ADDBA,
+	IWL_EMPTYING_HW_QUEUE_DELBA,
+};
+
+/**
+ * struct iwl_ht_agg - aggregation state machine
+
+ * This structs holds the states for the BA agreement establishment and tear
+ * down. It also holds the state during the BA session itself. This struct is
+ * duplicated for each RA / TID.
+
+ * @rate_n_flags: Rate at which Tx was attempted. Holds the data between the
+ *	Tx response (REPLY_TX), and the block ack notification
+ *	(REPLY_COMPRESSED_BA).
+ * @state: state of the BA agreement establishment / tear down.
+ * @txq_id: Tx queue used by the BA session
+ * @ssn: the first packet to be sent in AGG HW queue in Tx AGG start flow, or
+ *	the first packet to be sent in legacy HW queue in Tx AGG stop flow.
+ *	Basically when next_reclaimed reaches ssn, we can tell mac80211 that
+ *	we are ready to finish the Tx AGG stop / start flow.
+ * @wait_for_ba: Expect block-ack before next Tx reply
+ */
+struct iwl_ht_agg {
+	u32 rate_n_flags;
+	enum iwl_agg_state state;
+	u16 txq_id;
+	u16 ssn;
+	bool wait_for_ba;
+};
+
+/**
+ * struct iwl_tid_data - one for each RA / TID
+
+ * This structs holds the states for each RA / TID.
+
+ * @seq_number: the next WiFi sequence number to use
+ * @next_reclaimed: the WiFi sequence number of the next packet to be acked.
+ *	This is basically (last acked packet++).
+ * @agg: aggregation state machine
+ */
+struct iwl_tid_data {
+	u16 seq_number;
+	u16 next_reclaimed;
+	struct iwl_ht_agg agg;
+};
+
+/*
+ * Structure should be accessed with sta_lock held. When station addition
+ * is in progress (IWL_STA_UCODE_INPROGRESS) it is possible to access only
+ * the commands (iwl_addsta_cmd and iwl_link_quality_cmd) without sta_lock
+ * held.
+ */
+struct iwl_station_entry {
+	struct iwl_addsta_cmd sta;
+	u8 used, ctxid;
+	struct iwl_link_quality_cmd *lq;
+};
+
+/*
+ * iwl_station_priv: Driver's private station information
+ *
+ * When mac80211 creates a station it reserves some space (hw->sta_data_size)
+ * in the structure for use by driver. This structure is places in that
+ * space.
+ */
+struct iwl_station_priv {
+	struct iwl_rxon_context *ctx;
+	struct iwl_lq_sta lq_sta;
+	atomic_t pending_frames;
+	bool client;
+	bool asleep;
+	u8 max_agg_bufsize;
+	u8 sta_id;
+};
+
+/**
+ * struct iwl_vif_priv - driver's private per-interface information
+ *
+ * When mac80211 allocates a virtual interface, it can allocate
+ * space for us to put data into.
+ */
+struct iwl_vif_priv {
+	struct iwl_rxon_context *ctx;
+	u8 ibss_bssid_sta_id;
+};
+
+struct iwl_sensitivity_ranges {
+	u16 min_nrg_cck;
+
+	u16 nrg_th_cck;
+	u16 nrg_th_ofdm;
+
+	u16 auto_corr_min_ofdm;
+	u16 auto_corr_min_ofdm_mrc;
+	u16 auto_corr_min_ofdm_x1;
+	u16 auto_corr_min_ofdm_mrc_x1;
+
+	u16 auto_corr_max_ofdm;
+	u16 auto_corr_max_ofdm_mrc;
+	u16 auto_corr_max_ofdm_x1;
+	u16 auto_corr_max_ofdm_mrc_x1;
+
+	u16 auto_corr_max_cck;
+	u16 auto_corr_max_cck_mrc;
+	u16 auto_corr_min_cck;
+	u16 auto_corr_min_cck_mrc;
+
+	u16 barker_corr_th_min;
+	u16 barker_corr_th_min_mrc;
+	u16 nrg_th_cca;
+};
+
+
+#define KELVIN_TO_CELSIUS(x) ((x)-273)
+#define CELSIUS_TO_KELVIN(x) ((x)+273)
+
+
+/******************************************************************************
+ *
+ * Functions implemented in core module which are forward declared here
+ * for use by iwl-[4-5].c
+ *
+ * NOTE:  The implementation of these functions are not hardware specific
+ * which is why they are in the core module files.
+ *
+ * Naming convention --
+ * iwl_         <-- Is part of iwlwifi
+ * iwlXXXX_     <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
+ *
+ ****************************************************************************/
+extern void iwl_update_chain_flags(struct iwl_priv *priv);
+extern const u8 iwl_bcast_addr[ETH_ALEN];
+
+#define IWL_OPERATION_MODE_AUTO     0
+#define IWL_OPERATION_MODE_HT_ONLY  1
+#define IWL_OPERATION_MODE_MIXED    2
+#define IWL_OPERATION_MODE_20MHZ    3
+
+#define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000
+
+/* Sensitivity and chain noise calibration */
+#define INITIALIZATION_VALUE		0xFFFF
+#define IWL_CAL_NUM_BEACONS		16
+#define MAXIMUM_ALLOWED_PATHLOSS	15
+
+#define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
+
+#define MAX_FA_OFDM  50
+#define MIN_FA_OFDM  5
+#define MAX_FA_CCK   50
+#define MIN_FA_CCK   5
+
+#define AUTO_CORR_STEP_OFDM       1
+
+#define AUTO_CORR_STEP_CCK     3
+#define AUTO_CORR_MAX_TH_CCK   160
+
+#define NRG_DIFF               2
+#define NRG_STEP_CCK           2
+#define NRG_MARGIN             8
+#define MAX_NUMBER_CCK_NO_FA 100
+
+#define AUTO_CORR_CCK_MIN_VAL_DEF    (125)
+
+#define CHAIN_A             0
+#define CHAIN_B             1
+#define CHAIN_C             2
+#define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4
+#define ALL_BAND_FILTER			0xFF00
+#define IN_BAND_FILTER			0xFF
+#define MIN_AVERAGE_NOISE_MAX_VALUE	0xFFFFFFFF
+
+#define NRG_NUM_PREV_STAT_L     20
+#define NUM_RX_CHAINS           3
+
+enum iwlagn_false_alarm_state {
+	IWL_FA_TOO_MANY = 0,
+	IWL_FA_TOO_FEW = 1,
+	IWL_FA_GOOD_RANGE = 2,
+};
+
+enum iwlagn_chain_noise_state {
+	IWL_CHAIN_NOISE_ALIVE = 0,  /* must be 0 */
+	IWL_CHAIN_NOISE_ACCUMULATE,
+	IWL_CHAIN_NOISE_CALIBRATED,
+	IWL_CHAIN_NOISE_DONE,
+};
+
+/* Sensitivity calib data */
+struct iwl_sensitivity_data {
+	u32 auto_corr_ofdm;
+	u32 auto_corr_ofdm_mrc;
+	u32 auto_corr_ofdm_x1;
+	u32 auto_corr_ofdm_mrc_x1;
+	u32 auto_corr_cck;
+	u32 auto_corr_cck_mrc;
+
+	u32 last_bad_plcp_cnt_ofdm;
+	u32 last_fa_cnt_ofdm;
+	u32 last_bad_plcp_cnt_cck;
+	u32 last_fa_cnt_cck;
+
+	u32 nrg_curr_state;
+	u32 nrg_prev_state;
+	u32 nrg_value[10];
+	u8  nrg_silence_rssi[NRG_NUM_PREV_STAT_L];
+	u32 nrg_silence_ref;
+	u32 nrg_energy_idx;
+	u32 nrg_silence_idx;
+	u32 nrg_th_cck;
+	s32 nrg_auto_corr_silence_diff;
+	u32 num_in_cck_no_fa;
+	u32 nrg_th_ofdm;
+
+	u16 barker_corr_th_min;
+	u16 barker_corr_th_min_mrc;
+	u16 nrg_th_cca;
+};
+
+/* Chain noise (differential Rx gain) calib data */
+struct iwl_chain_noise_data {
+	u32 active_chains;
+	u32 chain_noise_a;
+	u32 chain_noise_b;
+	u32 chain_noise_c;
+	u32 chain_signal_a;
+	u32 chain_signal_b;
+	u32 chain_signal_c;
+	u16 beacon_count;
+	u8 disconn_array[NUM_RX_CHAINS];
+	u8 delta_gain_code[NUM_RX_CHAINS];
+	u8 radio_write;
+	u8 state;
+};
+
+enum {
+	MEASUREMENT_READY = (1 << 0),
+	MEASUREMENT_ACTIVE = (1 << 1),
+};
+
+/* reply_tx_statistics (for _agn devices) */
+struct reply_tx_error_statistics {
+	u32 pp_delay;
+	u32 pp_few_bytes;
+	u32 pp_bt_prio;
+	u32 pp_quiet_period;
+	u32 pp_calc_ttak;
+	u32 int_crossed_retry;
+	u32 short_limit;
+	u32 long_limit;
+	u32 fifo_underrun;
+	u32 drain_flow;
+	u32 rfkill_flush;
+	u32 life_expire;
+	u32 dest_ps;
+	u32 host_abort;
+	u32 bt_retry;
+	u32 sta_invalid;
+	u32 frag_drop;
+	u32 tid_disable;
+	u32 fifo_flush;
+	u32 insuff_cf_poll;
+	u32 fail_hw_drop;
+	u32 sta_color_mismatch;
+	u32 unknown;
+};
+
+/* reply_agg_tx_statistics (for _agn devices) */
+struct reply_agg_tx_error_statistics {
+	u32 underrun;
+	u32 bt_prio;
+	u32 few_bytes;
+	u32 abort;
+	u32 last_sent_ttl;
+	u32 last_sent_try;
+	u32 last_sent_bt_kill;
+	u32 scd_query;
+	u32 bad_crc32;
+	u32 response;
+	u32 dump_tx;
+	u32 delay_tx;
+	u32 unknown;
+};
+
+/*
+ * schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds
+ * to perform continuous uCode event logging operation if enabled
+ */
+#define UCODE_TRACE_PERIOD (10)
+
+/*
+ * iwl_event_log: current uCode event log position
+ *
+ * @ucode_trace: enable/disable ucode continuous trace timer
+ * @num_wraps: how many times the event buffer wraps
+ * @next_entry:  the entry just before the next one that uCode would fill
+ * @non_wraps_count: counter for no wrap detected when dump ucode events
+ * @wraps_once_count: counter for wrap once detected when dump ucode events
+ * @wraps_more_count: counter for wrap more than once detected
+ *		      when dump ucode events
+ */
+struct iwl_event_log {
+	bool ucode_trace;
+	u32 num_wraps;
+	u32 next_entry;
+	int non_wraps_count;
+	int wraps_once_count;
+	int wraps_more_count;
+};
+
+#define IWL_DELAY_NEXT_FORCE_RF_RESET  (HZ*3)
+
+/* BT Antenna Coupling Threshold (dB) */
+#define IWL_BT_ANTENNA_COUPLING_THRESHOLD	(35)
+
+/* Firmware reload counter and Timestamp */
+#define IWL_MIN_RELOAD_DURATION		1000 /* 1000 ms */
+#define IWL_MAX_CONTINUE_RELOAD_CNT	4
+
+
+struct iwl_rf_reset {
+	int reset_request_count;
+	int reset_success_count;
+	int reset_reject_count;
+	unsigned long last_reset_jiffies;
+};
+
+enum iwl_rxon_context_id {
+	IWL_RXON_CTX_BSS,
+	IWL_RXON_CTX_PAN,
+
+	NUM_IWL_RXON_CTX
+};
+
+/* extend beacon time format bit shifting  */
+/*
+ * for _agn devices
+ * bits 31:22 - extended
+ * bits 21:0  - interval
+ */
+#define IWLAGN_EXT_BEACON_TIME_POS	22
+
+struct iwl_rxon_context {
+	struct ieee80211_vif *vif;
+
+	u8 mcast_queue;
+	u8 ac_to_queue[IEEE80211_NUM_ACS];
+	u8 ac_to_fifo[IEEE80211_NUM_ACS];
+
+	/*
+	 * We could use the vif to indicate active, but we
+	 * also need it to be active during disabling when
+	 * we already removed the vif for type setting.
+	 */
+	bool always_active, is_active;
+
+	bool ht_need_multiple_chains;
+
+	enum iwl_rxon_context_id ctxid;
+
+	u32 interface_modes, exclusive_interface_modes;
+	u8 unused_devtype, ap_devtype, ibss_devtype, station_devtype;
+
+	/*
+	 * We declare this const so it can only be
+	 * changed via explicit cast within the
+	 * routines that actually update the physical
+	 * hardware.
+	 */
+	const struct iwl_rxon_cmd active;
+	struct iwl_rxon_cmd staging;
+
+	struct iwl_rxon_time_cmd timing;
+
+	struct iwl_qos_info qos_data;
+
+	u8 bcast_sta_id, ap_sta_id;
+
+	u8 rxon_cmd, rxon_assoc_cmd, rxon_timing_cmd;
+	u8 qos_cmd;
+	u8 wep_key_cmd;
+
+	struct iwl_wep_key wep_keys[WEP_KEYS_MAX];
+	u8 key_mapping_keys;
+
+	__le32 station_flags;
+
+	int beacon_int;
+
+	struct {
+		bool non_gf_sta_present;
+		u8 protection;
+		bool enabled, is_40mhz;
+		u8 extension_chan_offset;
+	} ht;
+};
+
+enum iwl_scan_type {
+	IWL_SCAN_NORMAL,
+	IWL_SCAN_RADIO_RESET,
+	IWL_SCAN_ROC,
+};
+
+/**
+ * struct iwl_hw_params
+ *
+ * Holds the module parameters
+ *
+ * @tx_chains_num: Number of TX chains
+ * @rx_chains_num: Number of RX chains
+ * @ct_kill_threshold: temperature threshold - in hw dependent unit
+ * @ct_kill_exit_threshold: when to reeable the device - in hw dependent unit
+ *	relevant for 1000, 6000 and up
+ * @struct iwl_sensitivity_ranges: range of sensitivity values
+ * @use_rts_for_aggregation: use rts/cts protection for HT traffic
+ */
+struct iwl_hw_params {
+	u8  tx_chains_num;
+	u8  rx_chains_num;
+	bool use_rts_for_aggregation;
+	u32 ct_kill_threshold;
+	u32 ct_kill_exit_threshold;
+
+	const struct iwl_sensitivity_ranges *sens;
+};
+
+struct iwl_lib_ops {
+	/* set hw dependent parameters */
+	void (*set_hw_params)(struct iwl_priv *priv);
+	int (*set_channel_switch)(struct iwl_priv *priv,
+				  struct ieee80211_channel_switch *ch_switch);
+	/* device specific configuration */
+	void (*nic_config)(struct iwl_priv *priv);
+
+	/* temperature */
+	void (*temperature)(struct iwl_priv *priv);
+};
+
+struct iwl_wipan_noa_data {
+	struct rcu_head rcu_head;
+	u32 length;
+	u8 data[];
+};
+
+/* Calibration disabling bit mask */
+enum {
+	IWL_CALIB_ENABLE_ALL			= 0,
+
+	IWL_SENSITIVITY_CALIB_DISABLED		= BIT(0),
+	IWL_CHAIN_NOISE_CALIB_DISABLED		= BIT(1),
+	IWL_TX_POWER_CALIB_DISABLED		= BIT(2),
+
+	IWL_CALIB_DISABLE_ALL			= 0xFFFFFFFF,
+};
+
+#define IWL_OP_MODE_GET_DVM(_iwl_op_mode) \
+	((struct iwl_priv *) ((_iwl_op_mode)->op_mode_specific))
+
+#define IWL_MAC80211_GET_DVM(_hw) \
+	((struct iwl_priv *) ((struct iwl_op_mode *) \
+	(_hw)->priv)->op_mode_specific)
+
+struct iwl_priv {
+
+	struct iwl_trans *trans;
+	struct device *dev;		/* for debug prints only */
+	const struct iwl_cfg *cfg;
+	const struct iwl_fw *fw;
+	const struct iwl_lib_ops *lib;
+	unsigned long status;
+
+	spinlock_t sta_lock;
+	struct mutex mutex;
+
+	unsigned long transport_queue_stop;
+	bool passive_no_rx;
+#define IWL_INVALID_MAC80211_QUEUE	0xff
+	u8 queue_to_mac80211[IWL_MAX_HW_QUEUES];
+	atomic_t queue_stop_count[IWL_MAX_HW_QUEUES];
+
+	unsigned long agg_q_alloc[BITS_TO_LONGS(IWL_MAX_HW_QUEUES)];
+
+	/* ieee device used by generic ieee processing code */
+	struct ieee80211_hw *hw;
+
+	struct list_head calib_results;
+
+	struct workqueue_struct *workqueue;
+
+	struct iwl_hw_params hw_params;
+
+	enum ieee80211_band band;
+	u8 valid_contexts;
+
+	int (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv,
+				       struct iwl_rx_cmd_buffer *rxb,
+				       struct iwl_device_cmd *cmd);
+
+	struct iwl_notif_wait_data notif_wait;
+
+	/* spectrum measurement report caching */
+	struct iwl_spectrum_notification measure_report;
+	u8 measurement_status;
+
+#define IWL_OWNERSHIP_DRIVER	0
+#define IWL_OWNERSHIP_TM	1
+	u8 ucode_owner;
+
+	/* ucode beacon time */
+	u32 ucode_beacon_time;
+	int missed_beacon_threshold;
+
+	/* track IBSS manager (last beacon) status */
+	u32 ibss_manager;
+
+	/* jiffies when last recovery from statistics was performed */
+	unsigned long rx_statistics_jiffies;
+
+	/*counters */
+	u32 rx_handlers_stats[REPLY_MAX];
+
+	/* rf reset */
+	struct iwl_rf_reset rf_reset;
+
+	/* firmware reload counter and timestamp */
+	unsigned long reload_jiffies;
+	int reload_count;
+	bool ucode_loaded;
+	bool init_ucode_run;		/* Don't run init uCode again */
+
+	u8 plcp_delta_threshold;
+
+	/* thermal calibration */
+	s32 temperature;	/* Celsius */
+	s32 last_temperature;
+
+	struct iwl_wipan_noa_data __rcu *noa_data;
+
+	/* Scan related variables */
+	unsigned long scan_start;
+	unsigned long scan_start_tsf;
+	void *scan_cmd;
+	enum ieee80211_band scan_band;
+	struct cfg80211_scan_request *scan_request;
+	struct ieee80211_vif *scan_vif;
+	enum iwl_scan_type scan_type;
+	u8 scan_tx_ant[IEEE80211_NUM_BANDS];
+	u8 mgmt_tx_ant;
+
+	/* max number of station keys */
+	u8 sta_key_max_num;
+
+	bool new_scan_threshold_behaviour;
+
+	bool wowlan;
+
+	/* EEPROM MAC addresses */
+	struct mac_address addresses[2];
+
+	struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX];
+
+	__le16 switch_channel;
+
+	u8 start_calib;
+	struct iwl_sensitivity_data sensitivity_data;
+	struct iwl_chain_noise_data chain_noise_data;
+	__le16 sensitivity_tbl[HD_TABLE_SIZE];
+	__le16 enhance_sensitivity_tbl[ENHANCE_HD_TABLE_ENTRIES];
+
+	struct iwl_ht_config current_ht_config;
+
+	/* Rate scaling data */
+	u8 retry_rate;
+
+	int activity_timer_active;
+
+	struct iwl_power_mgr power_data;
+	struct iwl_tt_mgmt thermal_throttle;
+
+	/* station table variables */
+	int num_stations;
+	struct iwl_station_entry stations[IWLAGN_STATION_COUNT];
+	unsigned long ucode_key_table;
+	struct iwl_tid_data tid_data[IWLAGN_STATION_COUNT][IWL_MAX_TID_COUNT];
+	atomic_t num_aux_in_flight;
+
+	u8 mac80211_registered;
+
+	/* Indication if ieee80211_ops->open has been called */
+	u8 is_open;
+
+	enum nl80211_iftype iw_mode;
+
+	/* Last Rx'd beacon timestamp */
+	u64 timestamp;
+
+	struct {
+		__le32 flag;
+		struct statistics_general_common common;
+		struct statistics_rx_non_phy rx_non_phy;
+		struct statistics_rx_phy rx_ofdm;
+		struct statistics_rx_ht_phy rx_ofdm_ht;
+		struct statistics_rx_phy rx_cck;
+		struct statistics_tx tx;
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+		struct statistics_bt_activity bt_activity;
+		__le32 num_bt_kills, accum_num_bt_kills;
+#endif
+		spinlock_t lock;
+	} statistics;
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+	struct {
+		struct statistics_general_common common;
+		struct statistics_rx_non_phy rx_non_phy;
+		struct statistics_rx_phy rx_ofdm;
+		struct statistics_rx_ht_phy rx_ofdm_ht;
+		struct statistics_rx_phy rx_cck;
+		struct statistics_tx tx;
+		struct statistics_bt_activity bt_activity;
+	} accum_stats, delta_stats, max_delta_stats;
+#endif
+
+	/*
+	 * reporting the number of tids has AGG on. 0 means
+	 * no AGGREGATION
+	 */
+	u8 agg_tids_count;
+
+	struct iwl_rx_phy_res last_phy_res;
+	bool last_phy_res_valid;
+
+	/*
+	 * chain noise reset and gain commands are the
+	 * two extra calibration commands follows the standard
+	 * phy calibration commands
+	 */
+	u8 phy_calib_chain_noise_reset_cmd;
+	u8 phy_calib_chain_noise_gain_cmd;
+
+	/* counts reply_tx error */
+	struct reply_tx_error_statistics reply_tx_stats;
+	struct reply_agg_tx_error_statistics reply_agg_tx_stats;
+
+	/* remain-on-channel offload support */
+	struct ieee80211_channel *hw_roc_channel;
+	struct delayed_work hw_roc_disable_work;
+	enum nl80211_channel_type hw_roc_chantype;
+	int hw_roc_duration;
+	bool hw_roc_setup, hw_roc_start_notified;
+
+	/* bt coex */
+	u8 bt_enable_flag;
+	u8 bt_status;
+	u8 bt_traffic_load, last_bt_traffic_load;
+	bool bt_ch_announce;
+	bool bt_full_concurrent;
+	bool bt_ant_couple_ok;
+	__le32 kill_ack_mask;
+	__le32 kill_cts_mask;
+	__le16 bt_valid;
+	bool reduced_txpower;
+	u16 bt_on_thresh;
+	u16 bt_duration;
+	u16 dynamic_frag_thresh;
+	u8 bt_ci_compliance;
+	struct work_struct bt_traffic_change_work;
+	bool bt_enable_pspoll;
+	struct iwl_rxon_context *cur_rssi_ctx;
+	bool bt_is_sco;
+
+	struct work_struct restart;
+	struct work_struct scan_completed;
+	struct work_struct abort_scan;
+
+	struct work_struct beacon_update;
+	struct iwl_rxon_context *beacon_ctx;
+	struct sk_buff *beacon_skb;
+	void *beacon_cmd;
+
+	struct work_struct tt_work;
+	struct work_struct ct_enter;
+	struct work_struct ct_exit;
+	struct work_struct start_internal_scan;
+	struct work_struct tx_flush;
+	struct work_struct bt_full_concurrency;
+	struct work_struct bt_runtime_config;
+
+	struct delayed_work scan_check;
+
+	/* TX Power settings */
+	s8 tx_power_user_lmt;
+	s8 tx_power_next;
+
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+	/* debugfs */
+	struct dentry *debugfs_dir;
+	u32 dbgfs_sram_offset, dbgfs_sram_len;
+	bool disable_ht40;
+	void *wowlan_sram;
+#endif /* CONFIG_IWLWIFI_DEBUGFS */
+
+	struct iwl_eeprom_data *eeprom_data;
+	/* eeprom blob for debugfs/testmode */
+	u8 *eeprom_blob;
+	size_t eeprom_blob_size;
+
+	struct work_struct txpower_work;
+	u32 calib_disabled;
+	struct work_struct run_time_calib_work;
+	struct timer_list statistics_periodic;
+	struct timer_list ucode_trace;
+
+	struct iwl_event_log event_log;
+
+	struct led_classdev led;
+	unsigned long blink_on, blink_off;
+	bool led_registered;
+
+#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
+	struct iwl_test tst;
+	u32 tm_fixed_rate;
+#endif
+
+	/* WoWLAN GTK rekey data */
+	u8 kck[NL80211_KCK_LEN], kek[NL80211_KEK_LEN];
+	__le64 replay_ctr;
+	__le16 last_seq_ctl;
+	bool have_rekey_data;
+
+	/* device_pointers: pointers to ucode event tables */
+	struct {
+		u32 error_event_table;
+		u32 log_event_table;
+	} device_pointers;
+
+	/* indicator of loaded ucode image */
+	enum iwl_ucode_type cur_ucode;
+}; /*iwl_priv */
+
+static inline struct iwl_rxon_context *
+iwl_rxon_ctx_from_vif(struct ieee80211_vif *vif)
+{
+	struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
+
+	return vif_priv->ctx;
+}
+
+#define for_each_context(priv, ctx)				\
+	for (ctx = &priv->contexts[IWL_RXON_CTX_BSS];		\
+	     ctx < &priv->contexts[NUM_IWL_RXON_CTX]; ctx++)	\
+		if (priv->valid_contexts & BIT(ctx->ctxid))
+
+static inline int iwl_is_associated_ctx(struct iwl_rxon_context *ctx)
+{
+	return (ctx->active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
+}
+
+static inline int iwl_is_associated(struct iwl_priv *priv,
+				    enum iwl_rxon_context_id ctxid)
+{
+	return iwl_is_associated_ctx(&priv->contexts[ctxid]);
+}
+
+static inline int iwl_is_any_associated(struct iwl_priv *priv)
+{
+	struct iwl_rxon_context *ctx;
+	for_each_context(priv, ctx)
+		if (iwl_is_associated_ctx(ctx))
+			return true;
+	return false;
+}
+
+#endif				/* __iwl_dev_h__ */
diff --git a/drivers/net/wireless/iwlwifi/dvm/devices.c b/drivers/net/wireless/iwlwifi/dvm/devices.c
new file mode 100644
index 00000000000..349c205d5f6
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/devices.c
@@ -0,0 +1,588 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+/*
+ * DVM device-specific data & functions
+ */
+#include "iwl-io.h"
+#include "iwl-prph.h"
+#include "iwl-eeprom-parse.h"
+
+#include "agn.h"
+#include "dev.h"
+#include "commands.h"
+
+
+/*
+ * 1000 series
+ * ===========
+ */
+
+/*
+ * For 1000, use advance thermal throttling critical temperature threshold,
+ * but legacy thermal management implementation for now.
+ * This is for the reason of 1000 uCode using advance thermal throttling API
+ * but not implement ct_kill_exit based on ct_kill exit temperature
+ * so the thermal throttling will still based on legacy thermal throttling
+ * management.
+ * The code here need to be modified once 1000 uCode has the advanced thermal
+ * throttling algorithm in place
+ */
+static void iwl1000_set_ct_threshold(struct iwl_priv *priv)
+{
+	/* want Celsius */
+	priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
+	priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
+}
+
+/* NIC configuration for 1000 series */
+static void iwl1000_nic_config(struct iwl_priv *priv)
+{
+	/* Setting digital SVR for 1000 card to 1.32V */
+	/* locking is acquired in iwl_set_bits_mask_prph() function */
+	iwl_set_bits_mask_prph(priv->trans, APMG_DIGITAL_SVR_REG,
+				APMG_SVR_DIGITAL_VOLTAGE_1_32,
+				~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK);
+}
+
+/**
+ * iwl_beacon_time_mask_low - mask of lower 32 bit of beacon time
+ * @priv -- pointer to iwl_priv data structure
+ * @tsf_bits -- number of bits need to shift for masking)
+ */
+static inline u32 iwl_beacon_time_mask_low(struct iwl_priv *priv,
+					   u16 tsf_bits)
+{
+	return (1 << tsf_bits) - 1;
+}
+
+/**
+ * iwl_beacon_time_mask_high - mask of higher 32 bit of beacon time
+ * @priv -- pointer to iwl_priv data structure
+ * @tsf_bits -- number of bits need to shift for masking)
+ */
+static inline u32 iwl_beacon_time_mask_high(struct iwl_priv *priv,
+					    u16 tsf_bits)
+{
+	return ((1 << (32 - tsf_bits)) - 1) << tsf_bits;
+}
+
+/*
+ * extended beacon time format
+ * time in usec will be changed into a 32-bit value in extended:internal format
+ * the extended part is the beacon counts
+ * the internal part is the time in usec within one beacon interval
+ */
+static u32 iwl_usecs_to_beacons(struct iwl_priv *priv, u32 usec,
+				u32 beacon_interval)
+{
+	u32 quot;
+	u32 rem;
+	u32 interval = beacon_interval * TIME_UNIT;
+
+	if (!interval || !usec)
+		return 0;
+
+	quot = (usec / interval) &
+		(iwl_beacon_time_mask_high(priv, IWLAGN_EXT_BEACON_TIME_POS) >>
+		IWLAGN_EXT_BEACON_TIME_POS);
+	rem = (usec % interval) & iwl_beacon_time_mask_low(priv,
+				   IWLAGN_EXT_BEACON_TIME_POS);
+
+	return (quot << IWLAGN_EXT_BEACON_TIME_POS) + rem;
+}
+
+/* base is usually what we get from ucode with each received frame,
+ * the same as HW timer counter counting down
+ */
+static __le32 iwl_add_beacon_time(struct iwl_priv *priv, u32 base,
+			   u32 addon, u32 beacon_interval)
+{
+	u32 base_low = base & iwl_beacon_time_mask_low(priv,
+				IWLAGN_EXT_BEACON_TIME_POS);
+	u32 addon_low = addon & iwl_beacon_time_mask_low(priv,
+				IWLAGN_EXT_BEACON_TIME_POS);
+	u32 interval = beacon_interval * TIME_UNIT;
+	u32 res = (base & iwl_beacon_time_mask_high(priv,
+				IWLAGN_EXT_BEACON_TIME_POS)) +
+				(addon & iwl_beacon_time_mask_high(priv,
+				IWLAGN_EXT_BEACON_TIME_POS));
+
+	if (base_low > addon_low)
+		res += base_low - addon_low;
+	else if (base_low < addon_low) {
+		res += interval + base_low - addon_low;
+		res += (1 << IWLAGN_EXT_BEACON_TIME_POS);
+	} else
+		res += (1 << IWLAGN_EXT_BEACON_TIME_POS);
+
+	return cpu_to_le32(res);
+}
+
+static const struct iwl_sensitivity_ranges iwl1000_sensitivity = {
+	.min_nrg_cck = 95,
+	.auto_corr_min_ofdm = 90,
+	.auto_corr_min_ofdm_mrc = 170,
+	.auto_corr_min_ofdm_x1 = 120,
+	.auto_corr_min_ofdm_mrc_x1 = 240,
+
+	.auto_corr_max_ofdm = 120,
+	.auto_corr_max_ofdm_mrc = 210,
+	.auto_corr_max_ofdm_x1 = 155,
+	.auto_corr_max_ofdm_mrc_x1 = 290,
+
+	.auto_corr_min_cck = 125,
+	.auto_corr_max_cck = 200,
+	.auto_corr_min_cck_mrc = 170,
+	.auto_corr_max_cck_mrc = 400,
+	.nrg_th_cck = 95,
+	.nrg_th_ofdm = 95,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 390,
+	.nrg_th_cca = 62,
+};
+
+static void iwl1000_hw_set_hw_params(struct iwl_priv *priv)
+{
+	iwl1000_set_ct_threshold(priv);
+
+	/* Set initial sensitivity parameters */
+	priv->hw_params.sens = &iwl1000_sensitivity;
+}
+
+struct iwl_lib_ops iwl1000_lib = {
+	.set_hw_params = iwl1000_hw_set_hw_params,
+	.nic_config = iwl1000_nic_config,
+	.temperature = iwlagn_temperature,
+};
+
+
+/*
+ * 2000 series
+ * ===========
+ */
+
+static void iwl2000_set_ct_threshold(struct iwl_priv *priv)
+{
+	/* want Celsius */
+	priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
+	priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
+}
+
+/* NIC configuration for 2000 series */
+static void iwl2000_nic_config(struct iwl_priv *priv)
+{
+	iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG,
+		    CSR_GP_DRIVER_REG_BIT_RADIO_IQ_INVER);
+}
+
+static const struct iwl_sensitivity_ranges iwl2000_sensitivity = {
+	.min_nrg_cck = 97,
+	.auto_corr_min_ofdm = 80,
+	.auto_corr_min_ofdm_mrc = 128,
+	.auto_corr_min_ofdm_x1 = 105,
+	.auto_corr_min_ofdm_mrc_x1 = 192,
+
+	.auto_corr_max_ofdm = 145,
+	.auto_corr_max_ofdm_mrc = 232,
+	.auto_corr_max_ofdm_x1 = 110,
+	.auto_corr_max_ofdm_mrc_x1 = 232,
+
+	.auto_corr_min_cck = 125,
+	.auto_corr_max_cck = 175,
+	.auto_corr_min_cck_mrc = 160,
+	.auto_corr_max_cck_mrc = 310,
+	.nrg_th_cck = 97,
+	.nrg_th_ofdm = 100,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 390,
+	.nrg_th_cca = 62,
+};
+
+static void iwl2000_hw_set_hw_params(struct iwl_priv *priv)
+{
+	iwl2000_set_ct_threshold(priv);
+
+	/* Set initial sensitivity parameters */
+	priv->hw_params.sens = &iwl2000_sensitivity;
+}
+
+struct iwl_lib_ops iwl2000_lib = {
+	.set_hw_params = iwl2000_hw_set_hw_params,
+	.nic_config = iwl2000_nic_config,
+	.temperature = iwlagn_temperature,
+};
+
+struct iwl_lib_ops iwl2030_lib = {
+	.set_hw_params = iwl2000_hw_set_hw_params,
+	.nic_config = iwl2000_nic_config,
+	.temperature = iwlagn_temperature,
+};
+
+/*
+ * 5000 series
+ * ===========
+ */
+
+/* NIC configuration for 5000 series */
+static const struct iwl_sensitivity_ranges iwl5000_sensitivity = {
+	.min_nrg_cck = 100,
+	.auto_corr_min_ofdm = 90,
+	.auto_corr_min_ofdm_mrc = 170,
+	.auto_corr_min_ofdm_x1 = 105,
+	.auto_corr_min_ofdm_mrc_x1 = 220,
+
+	.auto_corr_max_ofdm = 120,
+	.auto_corr_max_ofdm_mrc = 210,
+	.auto_corr_max_ofdm_x1 = 120,
+	.auto_corr_max_ofdm_mrc_x1 = 240,
+
+	.auto_corr_min_cck = 125,
+	.auto_corr_max_cck = 200,
+	.auto_corr_min_cck_mrc = 200,
+	.auto_corr_max_cck_mrc = 400,
+	.nrg_th_cck = 100,
+	.nrg_th_ofdm = 100,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 390,
+	.nrg_th_cca = 62,
+};
+
+static struct iwl_sensitivity_ranges iwl5150_sensitivity = {
+	.min_nrg_cck = 95,
+	.auto_corr_min_ofdm = 90,
+	.auto_corr_min_ofdm_mrc = 170,
+	.auto_corr_min_ofdm_x1 = 105,
+	.auto_corr_min_ofdm_mrc_x1 = 220,
+
+	.auto_corr_max_ofdm = 120,
+	.auto_corr_max_ofdm_mrc = 210,
+	/* max = min for performance bug in 5150 DSP */
+	.auto_corr_max_ofdm_x1 = 105,
+	.auto_corr_max_ofdm_mrc_x1 = 220,
+
+	.auto_corr_min_cck = 125,
+	.auto_corr_max_cck = 200,
+	.auto_corr_min_cck_mrc = 170,
+	.auto_corr_max_cck_mrc = 400,
+	.nrg_th_cck = 95,
+	.nrg_th_ofdm = 95,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 390,
+	.nrg_th_cca = 62,
+};
+
+#define IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF	(-5)
+
+static s32 iwl_temp_calib_to_offset(struct iwl_priv *priv)
+{
+	u16 temperature, voltage;
+
+	temperature = le16_to_cpu(priv->eeprom_data->kelvin_temperature);
+	voltage = le16_to_cpu(priv->eeprom_data->kelvin_voltage);
+
+	/* offset = temp - volt / coeff */
+	return (s32)(temperature -
+			voltage / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF);
+}
+
+static void iwl5150_set_ct_threshold(struct iwl_priv *priv)
+{
+	const s32 volt2temp_coef = IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF;
+	s32 threshold = (s32)CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY) -
+			iwl_temp_calib_to_offset(priv);
+
+	priv->hw_params.ct_kill_threshold = threshold * volt2temp_coef;
+}
+
+static void iwl5000_set_ct_threshold(struct iwl_priv *priv)
+{
+	/* want Celsius */
+	priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
+}
+
+static void iwl5000_hw_set_hw_params(struct iwl_priv *priv)
+{
+	iwl5000_set_ct_threshold(priv);
+
+	/* Set initial sensitivity parameters */
+	priv->hw_params.sens = &iwl5000_sensitivity;
+}
+
+static void iwl5150_hw_set_hw_params(struct iwl_priv *priv)
+{
+	iwl5150_set_ct_threshold(priv);
+
+	/* Set initial sensitivity parameters */
+	priv->hw_params.sens = &iwl5150_sensitivity;
+}
+
+static void iwl5150_temperature(struct iwl_priv *priv)
+{
+	u32 vt = 0;
+	s32 offset =  iwl_temp_calib_to_offset(priv);
+
+	vt = le32_to_cpu(priv->statistics.common.temperature);
+	vt = vt / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF + offset;
+	/* now vt hold the temperature in Kelvin */
+	priv->temperature = KELVIN_TO_CELSIUS(vt);
+	iwl_tt_handler(priv);
+}
+
+static int iwl5000_hw_channel_switch(struct iwl_priv *priv,
+				     struct ieee80211_channel_switch *ch_switch)
+{
+	/*
+	 * MULTI-FIXME
+	 * See iwlagn_mac_channel_switch.
+	 */
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	struct iwl5000_channel_switch_cmd cmd;
+	u32 switch_time_in_usec, ucode_switch_time;
+	u16 ch;
+	u32 tsf_low;
+	u8 switch_count;
+	u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
+	struct ieee80211_vif *vif = ctx->vif;
+	struct iwl_host_cmd hcmd = {
+		.id = REPLY_CHANNEL_SWITCH,
+		.len = { sizeof(cmd), },
+		.flags = CMD_SYNC,
+		.data = { &cmd, },
+	};
+
+	cmd.band = priv->band == IEEE80211_BAND_2GHZ;
+	ch = ch_switch->channel->hw_value;
+	IWL_DEBUG_11H(priv, "channel switch from %d to %d\n",
+		      ctx->active.channel, ch);
+	cmd.channel = cpu_to_le16(ch);
+	cmd.rxon_flags = ctx->staging.flags;
+	cmd.rxon_filter_flags = ctx->staging.filter_flags;
+	switch_count = ch_switch->count;
+	tsf_low = ch_switch->timestamp & 0x0ffffffff;
+	/*
+	 * calculate the ucode channel switch time
+	 * adding TSF as one of the factor for when to switch
+	 */
+	if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
+		if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
+		    beacon_interval)) {
+			switch_count -= (priv->ucode_beacon_time -
+				tsf_low) / beacon_interval;
+		} else
+			switch_count = 0;
+	}
+	if (switch_count <= 1)
+		cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
+	else {
+		switch_time_in_usec =
+			vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
+		ucode_switch_time = iwl_usecs_to_beacons(priv,
+							 switch_time_in_usec,
+							 beacon_interval);
+		cmd.switch_time = iwl_add_beacon_time(priv,
+						      priv->ucode_beacon_time,
+						      ucode_switch_time,
+						      beacon_interval);
+	}
+	IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
+		      cmd.switch_time);
+	cmd.expect_beacon = ch_switch->channel->flags & IEEE80211_CHAN_RADAR;
+
+	return iwl_dvm_send_cmd(priv, &hcmd);
+}
+
+struct iwl_lib_ops iwl5000_lib = {
+	.set_hw_params = iwl5000_hw_set_hw_params,
+	.set_channel_switch = iwl5000_hw_channel_switch,
+	.temperature = iwlagn_temperature,
+};
+
+struct iwl_lib_ops iwl5150_lib = {
+	.set_hw_params = iwl5150_hw_set_hw_params,
+	.set_channel_switch = iwl5000_hw_channel_switch,
+	.temperature = iwl5150_temperature,
+};
+
+
+
+/*
+ * 6000 series
+ * ===========
+ */
+
+static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
+{
+	/* want Celsius */
+	priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
+	priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
+}
+
+/* NIC configuration for 6000 series */
+static void iwl6000_nic_config(struct iwl_priv *priv)
+{
+	switch (priv->cfg->device_family) {
+	case IWL_DEVICE_FAMILY_6005:
+	case IWL_DEVICE_FAMILY_6030:
+	case IWL_DEVICE_FAMILY_6000:
+		break;
+	case IWL_DEVICE_FAMILY_6000i:
+		/* 2x2 IPA phy type */
+		iwl_write32(priv->trans, CSR_GP_DRIVER_REG,
+			     CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
+		break;
+	case IWL_DEVICE_FAMILY_6050:
+		/* Indicate calibration version to uCode. */
+		if (priv->eeprom_data->calib_version >= 6)
+			iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG,
+					CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
+		break;
+	case IWL_DEVICE_FAMILY_6150:
+		/* Indicate calibration version to uCode. */
+		if (priv->eeprom_data->calib_version >= 6)
+			iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG,
+					CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
+		iwl_set_bit(priv->trans, CSR_GP_DRIVER_REG,
+			    CSR_GP_DRIVER_REG_BIT_6050_1x2);
+		break;
+	default:
+		WARN_ON(1);
+	}
+}
+
+static const struct iwl_sensitivity_ranges iwl6000_sensitivity = {
+	.min_nrg_cck = 110,
+	.auto_corr_min_ofdm = 80,
+	.auto_corr_min_ofdm_mrc = 128,
+	.auto_corr_min_ofdm_x1 = 105,
+	.auto_corr_min_ofdm_mrc_x1 = 192,
+
+	.auto_corr_max_ofdm = 145,
+	.auto_corr_max_ofdm_mrc = 232,
+	.auto_corr_max_ofdm_x1 = 110,
+	.auto_corr_max_ofdm_mrc_x1 = 232,
+
+	.auto_corr_min_cck = 125,
+	.auto_corr_max_cck = 175,
+	.auto_corr_min_cck_mrc = 160,
+	.auto_corr_max_cck_mrc = 310,
+	.nrg_th_cck = 110,
+	.nrg_th_ofdm = 110,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 336,
+	.nrg_th_cca = 62,
+};
+
+static void iwl6000_hw_set_hw_params(struct iwl_priv *priv)
+{
+	iwl6000_set_ct_threshold(priv);
+
+	/* Set initial sensitivity parameters */
+	priv->hw_params.sens = &iwl6000_sensitivity;
+
+}
+
+static int iwl6000_hw_channel_switch(struct iwl_priv *priv,
+				     struct ieee80211_channel_switch *ch_switch)
+{
+	/*
+	 * MULTI-FIXME
+	 * See iwlagn_mac_channel_switch.
+	 */
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	struct iwl6000_channel_switch_cmd cmd;
+	u32 switch_time_in_usec, ucode_switch_time;
+	u16 ch;
+	u32 tsf_low;
+	u8 switch_count;
+	u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
+	struct ieee80211_vif *vif = ctx->vif;
+	struct iwl_host_cmd hcmd = {
+		.id = REPLY_CHANNEL_SWITCH,
+		.len = { sizeof(cmd), },
+		.flags = CMD_SYNC,
+		.data = { &cmd, },
+	};
+
+	cmd.band = priv->band == IEEE80211_BAND_2GHZ;
+	ch = ch_switch->channel->hw_value;
+	IWL_DEBUG_11H(priv, "channel switch from %u to %u\n",
+		      ctx->active.channel, ch);
+	cmd.channel = cpu_to_le16(ch);
+	cmd.rxon_flags = ctx->staging.flags;
+	cmd.rxon_filter_flags = ctx->staging.filter_flags;
+	switch_count = ch_switch->count;
+	tsf_low = ch_switch->timestamp & 0x0ffffffff;
+	/*
+	 * calculate the ucode channel switch time
+	 * adding TSF as one of the factor for when to switch
+	 */
+	if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
+		if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
+		    beacon_interval)) {
+			switch_count -= (priv->ucode_beacon_time -
+				tsf_low) / beacon_interval;
+		} else
+			switch_count = 0;
+	}
+	if (switch_count <= 1)
+		cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
+	else {
+		switch_time_in_usec =
+			vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
+		ucode_switch_time = iwl_usecs_to_beacons(priv,
+							 switch_time_in_usec,
+							 beacon_interval);
+		cmd.switch_time = iwl_add_beacon_time(priv,
+						      priv->ucode_beacon_time,
+						      ucode_switch_time,
+						      beacon_interval);
+	}
+	IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
+		      cmd.switch_time);
+	cmd.expect_beacon = ch_switch->channel->flags & IEEE80211_CHAN_RADAR;
+
+	return iwl_dvm_send_cmd(priv, &hcmd);
+}
+
+struct iwl_lib_ops iwl6000_lib = {
+	.set_hw_params = iwl6000_hw_set_hw_params,
+	.set_channel_switch = iwl6000_hw_channel_switch,
+	.nic_config = iwl6000_nic_config,
+	.temperature = iwlagn_temperature,
+};
+
+struct iwl_lib_ops iwl6030_lib = {
+	.set_hw_params = iwl6000_hw_set_hw_params,
+	.set_channel_switch = iwl6000_hw_channel_switch,
+	.nic_config = iwl6000_nic_config,
+	.temperature = iwlagn_temperature,
+};
diff --git a/drivers/net/wireless/iwlwifi/dvm/led.c b/drivers/net/wireless/iwlwifi/dvm/led.c
new file mode 100644
index 00000000000..bf479f70909
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/led.c
@@ -0,0 +1,224 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <net/mac80211.h>
+#include <linux/etherdevice.h>
+#include <asm/unaligned.h>
+#include "iwl-io.h"
+#include "iwl-trans.h"
+#include "iwl-modparams.h"
+#include "dev.h"
+#include "agn.h"
+
+/* Throughput		OFF time(ms)	ON time (ms)
+ *	>300			25		25
+ *	>200 to 300		40		40
+ *	>100 to 200		55		55
+ *	>70 to 100		65		65
+ *	>50 to 70		75		75
+ *	>20 to 50		85		85
+ *	>10 to 20		95		95
+ *	>5 to 10		110		110
+ *	>1 to 5			130		130
+ *	>0 to 1			167		167
+ *	<=0					SOLID ON
+ */
+static const struct ieee80211_tpt_blink iwl_blink[] = {
+	{ .throughput = 0, .blink_time = 334 },
+	{ .throughput = 1 * 1024 - 1, .blink_time = 260 },
+	{ .throughput = 5 * 1024 - 1, .blink_time = 220 },
+	{ .throughput = 10 * 1024 - 1, .blink_time = 190 },
+	{ .throughput = 20 * 1024 - 1, .blink_time = 170 },
+	{ .throughput = 50 * 1024 - 1, .blink_time = 150 },
+	{ .throughput = 70 * 1024 - 1, .blink_time = 130 },
+	{ .throughput = 100 * 1024 - 1, .blink_time = 110 },
+	{ .throughput = 200 * 1024 - 1, .blink_time = 80 },
+	{ .throughput = 300 * 1024 - 1, .blink_time = 50 },
+};
+
+/* Set led register off */
+void iwlagn_led_enable(struct iwl_priv *priv)
+{
+	iwl_write32(priv->trans, CSR_LED_REG, CSR_LED_REG_TRUN_ON);
+}
+
+/*
+ * Adjust led blink rate to compensate on a MAC Clock difference on every HW
+ * Led blink rate analysis showed an average deviation of 20% on 5000 series
+ * and up.
+ * Need to compensate on the led on/off time per HW according to the deviation
+ * to achieve the desired led frequency
+ * The calculation is: (100-averageDeviation)/100 * blinkTime
+ * For code efficiency the calculation will be:
+ *     compensation = (100 - averageDeviation) * 64 / 100
+ *     NewBlinkTime = (compensation * BlinkTime) / 64
+ */
+static inline u8 iwl_blink_compensation(struct iwl_priv *priv,
+				    u8 time, u16 compensation)
+{
+	if (!compensation) {
+		IWL_ERR(priv, "undefined blink compensation: "
+			"use pre-defined blinking time\n");
+		return time;
+	}
+
+	return (u8)((time * compensation) >> 6);
+}
+
+static int iwl_send_led_cmd(struct iwl_priv *priv, struct iwl_led_cmd *led_cmd)
+{
+	struct iwl_host_cmd cmd = {
+		.id = REPLY_LEDS_CMD,
+		.len = { sizeof(struct iwl_led_cmd), },
+		.data = { led_cmd, },
+		.flags = CMD_ASYNC,
+	};
+	u32 reg;
+
+	reg = iwl_read32(priv->trans, CSR_LED_REG);
+	if (reg != (reg & CSR_LED_BSM_CTRL_MSK))
+		iwl_write32(priv->trans, CSR_LED_REG,
+			    reg & CSR_LED_BSM_CTRL_MSK);
+
+	return iwl_dvm_send_cmd(priv, &cmd);
+}
+
+/* Set led pattern command */
+static int iwl_led_cmd(struct iwl_priv *priv,
+		       unsigned long on,
+		       unsigned long off)
+{
+	struct iwl_led_cmd led_cmd = {
+		.id = IWL_LED_LINK,
+		.interval = IWL_DEF_LED_INTRVL
+	};
+	int ret;
+
+	if (!test_bit(STATUS_READY, &priv->status))
+		return -EBUSY;
+
+	if (priv->blink_on == on && priv->blink_off == off)
+		return 0;
+
+	if (off == 0) {
+		/* led is SOLID_ON */
+		on = IWL_LED_SOLID;
+	}
+
+	IWL_DEBUG_LED(priv, "Led blink time compensation=%u\n",
+			priv->cfg->base_params->led_compensation);
+	led_cmd.on = iwl_blink_compensation(priv, on,
+				priv->cfg->base_params->led_compensation);
+	led_cmd.off = iwl_blink_compensation(priv, off,
+				priv->cfg->base_params->led_compensation);
+
+	ret = iwl_send_led_cmd(priv, &led_cmd);
+	if (!ret) {
+		priv->blink_on = on;
+		priv->blink_off = off;
+	}
+	return ret;
+}
+
+static void iwl_led_brightness_set(struct led_classdev *led_cdev,
+				   enum led_brightness brightness)
+{
+	struct iwl_priv *priv = container_of(led_cdev, struct iwl_priv, led);
+	unsigned long on = 0;
+
+	if (brightness > 0)
+		on = IWL_LED_SOLID;
+
+	iwl_led_cmd(priv, on, 0);
+}
+
+static int iwl_led_blink_set(struct led_classdev *led_cdev,
+			     unsigned long *delay_on,
+			     unsigned long *delay_off)
+{
+	struct iwl_priv *priv = container_of(led_cdev, struct iwl_priv, led);
+
+	return iwl_led_cmd(priv, *delay_on, *delay_off);
+}
+
+void iwl_leds_init(struct iwl_priv *priv)
+{
+	int mode = iwlwifi_mod_params.led_mode;
+	int ret;
+
+	if (mode == IWL_LED_DISABLE) {
+		IWL_INFO(priv, "Led disabled\n");
+		return;
+	}
+	if (mode == IWL_LED_DEFAULT)
+		mode = priv->cfg->led_mode;
+
+	priv->led.name = kasprintf(GFP_KERNEL, "%s-led",
+				   wiphy_name(priv->hw->wiphy));
+	priv->led.brightness_set = iwl_led_brightness_set;
+	priv->led.blink_set = iwl_led_blink_set;
+	priv->led.max_brightness = 1;
+
+	switch (mode) {
+	case IWL_LED_DEFAULT:
+		WARN_ON(1);
+		break;
+	case IWL_LED_BLINK:
+		priv->led.default_trigger =
+			ieee80211_create_tpt_led_trigger(priv->hw,
+					IEEE80211_TPT_LEDTRIG_FL_CONNECTED,
+					iwl_blink, ARRAY_SIZE(iwl_blink));
+		break;
+	case IWL_LED_RF_STATE:
+		priv->led.default_trigger =
+			ieee80211_get_radio_led_name(priv->hw);
+		break;
+	}
+
+	ret = led_classdev_register(priv->trans->dev, &priv->led);
+	if (ret) {
+		kfree(priv->led.name);
+		return;
+	}
+
+	priv->led_registered = true;
+}
+
+void iwl_leds_exit(struct iwl_priv *priv)
+{
+	if (!priv->led_registered)
+		return;
+
+	led_classdev_unregister(&priv->led);
+	kfree(priv->led.name);
+}
diff --git a/drivers/net/wireless/iwlwifi/dvm/led.h b/drivers/net/wireless/iwlwifi/dvm/led.h
new file mode 100644
index 00000000000..b02a853103d
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/led.h
@@ -0,0 +1,43 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#ifndef __iwl_leds_h__
+#define __iwl_leds_h__
+
+
+struct iwl_priv;
+
+#define IWL_LED_SOLID 11
+#define IWL_DEF_LED_INTRVL cpu_to_le32(1000)
+
+#define IWL_LED_ACTIVITY       (0<<1)
+#define IWL_LED_LINK           (1<<1)
+
+void iwlagn_led_enable(struct iwl_priv *priv);
+void iwl_leds_init(struct iwl_priv *priv);
+void iwl_leds_exit(struct iwl_priv *priv);
+
+#endif /* __iwl_leds_h__ */
diff --git a/drivers/net/wireless/iwlwifi/dvm/lib.c b/drivers/net/wireless/iwlwifi/dvm/lib.c
new file mode 100644
index 00000000000..207ae91a83a
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/lib.c
@@ -0,0 +1,1291 @@
+/******************************************************************************
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+#include <linux/etherdevice.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <net/mac80211.h>
+
+#include "iwl-io.h"
+#include "iwl-agn-hw.h"
+#include "iwl-trans.h"
+#include "iwl-modparams.h"
+
+#include "dev.h"
+#include "agn.h"
+
+int iwlagn_hw_valid_rtc_data_addr(u32 addr)
+{
+	return (addr >= IWLAGN_RTC_DATA_LOWER_BOUND) &&
+		(addr < IWLAGN_RTC_DATA_UPPER_BOUND);
+}
+
+int iwlagn_send_tx_power(struct iwl_priv *priv)
+{
+	struct iwlagn_tx_power_dbm_cmd tx_power_cmd;
+	u8 tx_ant_cfg_cmd;
+
+	if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status),
+		      "TX Power requested while scanning!\n"))
+		return -EAGAIN;
+
+	/* half dBm need to multiply */
+	tx_power_cmd.global_lmt = (s8)(2 * priv->tx_power_user_lmt);
+
+	if (tx_power_cmd.global_lmt > priv->eeprom_data->max_tx_pwr_half_dbm) {
+		/*
+		 * For the newer devices which using enhanced/extend tx power
+		 * table in EEPROM, the format is in half dBm. driver need to
+		 * convert to dBm format before report to mac80211.
+		 * By doing so, there is a possibility of 1/2 dBm resolution
+		 * lost. driver will perform "round-up" operation before
+		 * reporting, but it will cause 1/2 dBm tx power over the
+		 * regulatory limit. Perform the checking here, if the
+		 * "tx_power_user_lmt" is higher than EEPROM value (in
+		 * half-dBm format), lower the tx power based on EEPROM
+		 */
+		tx_power_cmd.global_lmt =
+			priv->eeprom_data->max_tx_pwr_half_dbm;
+	}
+	tx_power_cmd.flags = IWLAGN_TX_POWER_NO_CLOSED;
+	tx_power_cmd.srv_chan_lmt = IWLAGN_TX_POWER_AUTO;
+
+	if (IWL_UCODE_API(priv->fw->ucode_ver) == 1)
+		tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD_V1;
+	else
+		tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD;
+
+	return iwl_dvm_send_cmd_pdu(priv, tx_ant_cfg_cmd, CMD_SYNC,
+			sizeof(tx_power_cmd), &tx_power_cmd);
+}
+
+void iwlagn_temperature(struct iwl_priv *priv)
+{
+	lockdep_assert_held(&priv->statistics.lock);
+
+	/* store temperature from correct statistics (in Celsius) */
+	priv->temperature = le32_to_cpu(priv->statistics.common.temperature);
+	iwl_tt_handler(priv);
+}
+
+int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band)
+{
+	int idx = 0;
+	int band_offset = 0;
+
+	/* HT rate format: mac80211 wants an MCS number, which is just LSB */
+	if (rate_n_flags & RATE_MCS_HT_MSK) {
+		idx = (rate_n_flags & 0xff);
+		return idx;
+	/* Legacy rate format, search for match in table */
+	} else {
+		if (band == IEEE80211_BAND_5GHZ)
+			band_offset = IWL_FIRST_OFDM_RATE;
+		for (idx = band_offset; idx < IWL_RATE_COUNT_LEGACY; idx++)
+			if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF))
+				return idx - band_offset;
+	}
+
+	return -1;
+}
+
+int iwlagn_manage_ibss_station(struct iwl_priv *priv,
+			       struct ieee80211_vif *vif, bool add)
+{
+	struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
+
+	if (add)
+		return iwlagn_add_bssid_station(priv, vif_priv->ctx,
+						vif->bss_conf.bssid,
+						&vif_priv->ibss_bssid_sta_id);
+	return iwl_remove_station(priv, vif_priv->ibss_bssid_sta_id,
+				  vif->bss_conf.bssid);
+}
+
+/**
+ * iwlagn_txfifo_flush: send REPLY_TXFIFO_FLUSH command to uCode
+ *
+ * pre-requirements:
+ *  1. acquire mutex before calling
+ *  2. make sure rf is on and not in exit state
+ */
+int iwlagn_txfifo_flush(struct iwl_priv *priv, u16 flush_control)
+{
+	struct iwl_txfifo_flush_cmd flush_cmd;
+	struct iwl_host_cmd cmd = {
+		.id = REPLY_TXFIFO_FLUSH,
+		.len = { sizeof(struct iwl_txfifo_flush_cmd), },
+		.flags = CMD_SYNC,
+		.data = { &flush_cmd, },
+	};
+
+	might_sleep();
+
+	memset(&flush_cmd, 0, sizeof(flush_cmd));
+	if (flush_control & BIT(IWL_RXON_CTX_BSS))
+		flush_cmd.fifo_control = IWL_SCD_VO_MSK | IWL_SCD_VI_MSK |
+				 IWL_SCD_BE_MSK | IWL_SCD_BK_MSK |
+				 IWL_SCD_MGMT_MSK;
+	if ((flush_control & BIT(IWL_RXON_CTX_PAN)) &&
+	    (priv->valid_contexts != BIT(IWL_RXON_CTX_BSS)))
+		flush_cmd.fifo_control |= IWL_PAN_SCD_VO_MSK |
+				IWL_PAN_SCD_VI_MSK | IWL_PAN_SCD_BE_MSK |
+				IWL_PAN_SCD_BK_MSK | IWL_PAN_SCD_MGMT_MSK |
+				IWL_PAN_SCD_MULTICAST_MSK;
+
+	if (priv->eeprom_data->sku & EEPROM_SKU_CAP_11N_ENABLE)
+		flush_cmd.fifo_control |= IWL_AGG_TX_QUEUE_MSK;
+
+	IWL_DEBUG_INFO(priv, "fifo queue control: 0X%x\n",
+		       flush_cmd.fifo_control);
+	flush_cmd.flush_control = cpu_to_le16(flush_control);
+
+	return iwl_dvm_send_cmd(priv, &cmd);
+}
+
+void iwlagn_dev_txfifo_flush(struct iwl_priv *priv, u16 flush_control)
+{
+	mutex_lock(&priv->mutex);
+	ieee80211_stop_queues(priv->hw);
+	if (iwlagn_txfifo_flush(priv, IWL_DROP_ALL)) {
+		IWL_ERR(priv, "flush request fail\n");
+		goto done;
+	}
+	IWL_DEBUG_INFO(priv, "wait transmit/flush all frames\n");
+	iwl_trans_wait_tx_queue_empty(priv->trans);
+done:
+	ieee80211_wake_queues(priv->hw);
+	mutex_unlock(&priv->mutex);
+}
+
+/*
+ * BT coex
+ */
+/* Notmal TDM */
+static const __le32 iwlagn_def_3w_lookup[IWLAGN_BT_DECISION_LUT_SIZE] = {
+	cpu_to_le32(0xaaaaaaaa),
+	cpu_to_le32(0xaaaaaaaa),
+	cpu_to_le32(0xaeaaaaaa),
+	cpu_to_le32(0xaaaaaaaa),
+	cpu_to_le32(0xcc00ff28),
+	cpu_to_le32(0x0000aaaa),
+	cpu_to_le32(0xcc00aaaa),
+	cpu_to_le32(0x0000aaaa),
+	cpu_to_le32(0xc0004000),
+	cpu_to_le32(0x00004000),
+	cpu_to_le32(0xf0005000),
+	cpu_to_le32(0xf0005000),
+};
+
+
+/* Loose Coex */
+static const __le32 iwlagn_loose_lookup[IWLAGN_BT_DECISION_LUT_SIZE] = {
+	cpu_to_le32(0xaaaaaaaa),
+	cpu_to_le32(0xaaaaaaaa),
+	cpu_to_le32(0xaeaaaaaa),
+	cpu_to_le32(0xaaaaaaaa),
+	cpu_to_le32(0xcc00ff28),
+	cpu_to_le32(0x0000aaaa),
+	cpu_to_le32(0xcc00aaaa),
+	cpu_to_le32(0x0000aaaa),
+	cpu_to_le32(0x00000000),
+	cpu_to_le32(0x00000000),
+	cpu_to_le32(0xf0005000),
+	cpu_to_le32(0xf0005000),
+};
+
+/* Full concurrency */
+static const __le32 iwlagn_concurrent_lookup[IWLAGN_BT_DECISION_LUT_SIZE] = {
+	cpu_to_le32(0xaaaaaaaa),
+	cpu_to_le32(0xaaaaaaaa),
+	cpu_to_le32(0xaaaaaaaa),
+	cpu_to_le32(0xaaaaaaaa),
+	cpu_to_le32(0xaaaaaaaa),
+	cpu_to_le32(0xaaaaaaaa),
+	cpu_to_le32(0xaaaaaaaa),
+	cpu_to_le32(0xaaaaaaaa),
+	cpu_to_le32(0x00000000),
+	cpu_to_le32(0x00000000),
+	cpu_to_le32(0x00000000),
+	cpu_to_le32(0x00000000),
+};
+
+void iwlagn_send_advance_bt_config(struct iwl_priv *priv)
+{
+	struct iwl_basic_bt_cmd basic = {
+		.max_kill = IWLAGN_BT_MAX_KILL_DEFAULT,
+		.bt3_timer_t7_value = IWLAGN_BT3_T7_DEFAULT,
+		.bt3_prio_sample_time = IWLAGN_BT3_PRIO_SAMPLE_DEFAULT,
+		.bt3_timer_t2_value = IWLAGN_BT3_T2_DEFAULT,
+	};
+	struct iwl_bt_cmd_v1 bt_cmd_v1;
+	struct iwl_bt_cmd_v2 bt_cmd_v2;
+	int ret;
+
+	BUILD_BUG_ON(sizeof(iwlagn_def_3w_lookup) !=
+			sizeof(basic.bt3_lookup_table));
+
+	if (priv->cfg->bt_params) {
+		/*
+		 * newer generation of devices (2000 series and newer)
+		 * use the version 2 of the bt command
+		 * we need to make sure sending the host command
+		 * with correct data structure to avoid uCode assert
+		 */
+		if (priv->cfg->bt_params->bt_session_2) {
+			bt_cmd_v2.prio_boost = cpu_to_le32(
+				priv->cfg->bt_params->bt_prio_boost);
+			bt_cmd_v2.tx_prio_boost = 0;
+			bt_cmd_v2.rx_prio_boost = 0;
+		} else {
+			bt_cmd_v1.prio_boost =
+				priv->cfg->bt_params->bt_prio_boost;
+			bt_cmd_v1.tx_prio_boost = 0;
+			bt_cmd_v1.rx_prio_boost = 0;
+		}
+	} else {
+		IWL_ERR(priv, "failed to construct BT Coex Config\n");
+		return;
+	}
+
+	/*
+	 * Possible situations when BT needs to take over for receive,
+	 * at the same time where STA needs to response to AP's frame(s),
+	 * reduce the tx power of the required response frames, by that,
+	 * allow the concurrent BT receive & WiFi transmit
+	 * (BT - ANT A, WiFi -ANT B), without interference to one another
+	 *
+	 * Reduced tx power apply to control frames only (ACK/Back/CTS)
+	 * when indicated by the BT config command
+	 */
+	basic.kill_ack_mask = priv->kill_ack_mask;
+	basic.kill_cts_mask = priv->kill_cts_mask;
+	if (priv->reduced_txpower)
+		basic.reduce_txpower = IWLAGN_BT_REDUCED_TX_PWR;
+	basic.valid = priv->bt_valid;
+
+	/*
+	 * Configure BT coex mode to "no coexistence" when the
+	 * user disabled BT coexistence, we have no interface
+	 * (might be in monitor mode), or the interface is in
+	 * IBSS mode (no proper uCode support for coex then).
+	 */
+	if (!iwlwifi_mod_params.bt_coex_active ||
+	    priv->iw_mode == NL80211_IFTYPE_ADHOC) {
+		basic.flags = IWLAGN_BT_FLAG_COEX_MODE_DISABLED;
+	} else {
+		basic.flags = IWLAGN_BT_FLAG_COEX_MODE_3W <<
+					IWLAGN_BT_FLAG_COEX_MODE_SHIFT;
+
+		if (!priv->bt_enable_pspoll)
+			basic.flags |= IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE;
+		else
+			basic.flags &= ~IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE;
+
+		if (priv->bt_ch_announce)
+			basic.flags |= IWLAGN_BT_FLAG_CHANNEL_INHIBITION;
+		IWL_DEBUG_COEX(priv, "BT coex flag: 0X%x\n", basic.flags);
+	}
+	priv->bt_enable_flag = basic.flags;
+	if (priv->bt_full_concurrent)
+		memcpy(basic.bt3_lookup_table, iwlagn_concurrent_lookup,
+			sizeof(iwlagn_concurrent_lookup));
+	else
+		memcpy(basic.bt3_lookup_table, iwlagn_def_3w_lookup,
+			sizeof(iwlagn_def_3w_lookup));
+
+	IWL_DEBUG_COEX(priv, "BT coex %s in %s mode\n",
+		       basic.flags ? "active" : "disabled",
+		       priv->bt_full_concurrent ?
+		       "full concurrency" : "3-wire");
+
+	if (priv->cfg->bt_params->bt_session_2) {
+		memcpy(&bt_cmd_v2.basic, &basic,
+			sizeof(basic));
+		ret = iwl_dvm_send_cmd_pdu(priv, REPLY_BT_CONFIG,
+			CMD_SYNC, sizeof(bt_cmd_v2), &bt_cmd_v2);
+	} else {
+		memcpy(&bt_cmd_v1.basic, &basic,
+			sizeof(basic));
+		ret = iwl_dvm_send_cmd_pdu(priv, REPLY_BT_CONFIG,
+			CMD_SYNC, sizeof(bt_cmd_v1), &bt_cmd_v1);
+	}
+	if (ret)
+		IWL_ERR(priv, "failed to send BT Coex Config\n");
+
+}
+
+void iwlagn_bt_adjust_rssi_monitor(struct iwl_priv *priv, bool rssi_ena)
+{
+	struct iwl_rxon_context *ctx, *found_ctx = NULL;
+	bool found_ap = false;
+
+	lockdep_assert_held(&priv->mutex);
+
+	/* Check whether AP or GO mode is active. */
+	if (rssi_ena) {
+		for_each_context(priv, ctx) {
+			if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_AP &&
+			    iwl_is_associated_ctx(ctx)) {
+				found_ap = true;
+				break;
+			}
+		}
+	}
+
+	/*
+	 * If disable was received or If GO/AP mode, disable RSSI
+	 * measurements.
+	 */
+	if (!rssi_ena || found_ap) {
+		if (priv->cur_rssi_ctx) {
+			ctx = priv->cur_rssi_ctx;
+			ieee80211_disable_rssi_reports(ctx->vif);
+			priv->cur_rssi_ctx = NULL;
+		}
+		return;
+	}
+
+	/*
+	 * If rssi measurements need to be enabled, consider all cases now.
+	 * Figure out how many contexts are active.
+	 */
+	for_each_context(priv, ctx) {
+		if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION &&
+		    iwl_is_associated_ctx(ctx)) {
+			found_ctx = ctx;
+			break;
+		}
+	}
+
+	/*
+	 * rssi monitor already enabled for the correct interface...nothing
+	 * to do.
+	 */
+	if (found_ctx == priv->cur_rssi_ctx)
+		return;
+
+	/*
+	 * Figure out if rssi monitor is currently enabled, and needs
+	 * to be changed. If rssi monitor is already enabled, disable
+	 * it first else just enable rssi measurements on the
+	 * interface found above.
+	 */
+	if (priv->cur_rssi_ctx) {
+		ctx = priv->cur_rssi_ctx;
+		if (ctx->vif)
+			ieee80211_disable_rssi_reports(ctx->vif);
+	}
+
+	priv->cur_rssi_ctx = found_ctx;
+
+	if (!found_ctx)
+		return;
+
+	ieee80211_enable_rssi_reports(found_ctx->vif,
+			IWLAGN_BT_PSP_MIN_RSSI_THRESHOLD,
+			IWLAGN_BT_PSP_MAX_RSSI_THRESHOLD);
+}
+
+static bool iwlagn_bt_traffic_is_sco(struct iwl_bt_uart_msg *uart_msg)
+{
+	return BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3 >>
+			BT_UART_MSG_FRAME3SCOESCO_POS;
+}
+
+static void iwlagn_bt_traffic_change_work(struct work_struct *work)
+{
+	struct iwl_priv *priv =
+		container_of(work, struct iwl_priv, bt_traffic_change_work);
+	struct iwl_rxon_context *ctx;
+	int smps_request = -1;
+
+	if (priv->bt_enable_flag == IWLAGN_BT_FLAG_COEX_MODE_DISABLED) {
+		/* bt coex disabled */
+		return;
+	}
+
+	/*
+	 * Note: bt_traffic_load can be overridden by scan complete and
+	 * coex profile notifications. Ignore that since only bad consequence
+	 * can be not matching debug print with actual state.
+	 */
+	IWL_DEBUG_COEX(priv, "BT traffic load changes: %d\n",
+		       priv->bt_traffic_load);
+
+	switch (priv->bt_traffic_load) {
+	case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
+		if (priv->bt_status)
+			smps_request = IEEE80211_SMPS_DYNAMIC;
+		else
+			smps_request = IEEE80211_SMPS_AUTOMATIC;
+		break;
+	case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
+		smps_request = IEEE80211_SMPS_DYNAMIC;
+		break;
+	case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
+	case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
+		smps_request = IEEE80211_SMPS_STATIC;
+		break;
+	default:
+		IWL_ERR(priv, "Invalid BT traffic load: %d\n",
+			priv->bt_traffic_load);
+		break;
+	}
+
+	mutex_lock(&priv->mutex);
+
+	/*
+	 * We can not send command to firmware while scanning. When the scan
+	 * complete we will schedule this work again. We do check with mutex
+	 * locked to prevent new scan request to arrive. We do not check
+	 * STATUS_SCANNING to avoid race when queue_work two times from
+	 * different notifications, but quit and not perform any work at all.
+	 */
+	if (test_bit(STATUS_SCAN_HW, &priv->status))
+		goto out;
+
+	iwl_update_chain_flags(priv);
+
+	if (smps_request != -1) {
+		priv->current_ht_config.smps = smps_request;
+		for_each_context(priv, ctx) {
+			if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION)
+				ieee80211_request_smps(ctx->vif, smps_request);
+		}
+	}
+
+	/*
+	 * Dynamic PS poll related functionality. Adjust RSSI measurements if
+	 * necessary.
+	 */
+	iwlagn_bt_coex_rssi_monitor(priv);
+out:
+	mutex_unlock(&priv->mutex);
+}
+
+/*
+ * If BT sco traffic, and RSSI monitor is enabled, move measurements to the
+ * correct interface or disable it if this is the last interface to be
+ * removed.
+ */
+void iwlagn_bt_coex_rssi_monitor(struct iwl_priv *priv)
+{
+	if (priv->bt_is_sco &&
+	    priv->bt_traffic_load == IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS)
+		iwlagn_bt_adjust_rssi_monitor(priv, true);
+	else
+		iwlagn_bt_adjust_rssi_monitor(priv, false);
+}
+
+static void iwlagn_print_uartmsg(struct iwl_priv *priv,
+				struct iwl_bt_uart_msg *uart_msg)
+{
+	IWL_DEBUG_COEX(priv, "Message Type = 0x%X, SSN = 0x%X, "
+			"Update Req = 0x%X\n",
+		(BT_UART_MSG_FRAME1MSGTYPE_MSK & uart_msg->frame1) >>
+			BT_UART_MSG_FRAME1MSGTYPE_POS,
+		(BT_UART_MSG_FRAME1SSN_MSK & uart_msg->frame1) >>
+			BT_UART_MSG_FRAME1SSN_POS,
+		(BT_UART_MSG_FRAME1UPDATEREQ_MSK & uart_msg->frame1) >>
+			BT_UART_MSG_FRAME1UPDATEREQ_POS);
+
+	IWL_DEBUG_COEX(priv, "Open connections = 0x%X, Traffic load = 0x%X, "
+			"Chl_SeqN = 0x%X, In band = 0x%X\n",
+		(BT_UART_MSG_FRAME2OPENCONNECTIONS_MSK & uart_msg->frame2) >>
+			BT_UART_MSG_FRAME2OPENCONNECTIONS_POS,
+		(BT_UART_MSG_FRAME2TRAFFICLOAD_MSK & uart_msg->frame2) >>
+			BT_UART_MSG_FRAME2TRAFFICLOAD_POS,
+		(BT_UART_MSG_FRAME2CHLSEQN_MSK & uart_msg->frame2) >>
+			BT_UART_MSG_FRAME2CHLSEQN_POS,
+		(BT_UART_MSG_FRAME2INBAND_MSK & uart_msg->frame2) >>
+			BT_UART_MSG_FRAME2INBAND_POS);
+
+	IWL_DEBUG_COEX(priv, "SCO/eSCO = 0x%X, Sniff = 0x%X, A2DP = 0x%X, "
+			"ACL = 0x%X, Master = 0x%X, OBEX = 0x%X\n",
+		(BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3) >>
+			BT_UART_MSG_FRAME3SCOESCO_POS,
+		(BT_UART_MSG_FRAME3SNIFF_MSK & uart_msg->frame3) >>
+			BT_UART_MSG_FRAME3SNIFF_POS,
+		(BT_UART_MSG_FRAME3A2DP_MSK & uart_msg->frame3) >>
+			BT_UART_MSG_FRAME3A2DP_POS,
+		(BT_UART_MSG_FRAME3ACL_MSK & uart_msg->frame3) >>
+			BT_UART_MSG_FRAME3ACL_POS,
+		(BT_UART_MSG_FRAME3MASTER_MSK & uart_msg->frame3) >>
+			BT_UART_MSG_FRAME3MASTER_POS,
+		(BT_UART_MSG_FRAME3OBEX_MSK & uart_msg->frame3) >>
+			BT_UART_MSG_FRAME3OBEX_POS);
+
+	IWL_DEBUG_COEX(priv, "Idle duration = 0x%X\n",
+		(BT_UART_MSG_FRAME4IDLEDURATION_MSK & uart_msg->frame4) >>
+			BT_UART_MSG_FRAME4IDLEDURATION_POS);
+
+	IWL_DEBUG_COEX(priv, "Tx Activity = 0x%X, Rx Activity = 0x%X, "
+			"eSCO Retransmissions = 0x%X\n",
+		(BT_UART_MSG_FRAME5TXACTIVITY_MSK & uart_msg->frame5) >>
+			BT_UART_MSG_FRAME5TXACTIVITY_POS,
+		(BT_UART_MSG_FRAME5RXACTIVITY_MSK & uart_msg->frame5) >>
+			BT_UART_MSG_FRAME5RXACTIVITY_POS,
+		(BT_UART_MSG_FRAME5ESCORETRANSMIT_MSK & uart_msg->frame5) >>
+			BT_UART_MSG_FRAME5ESCORETRANSMIT_POS);
+
+	IWL_DEBUG_COEX(priv, "Sniff Interval = 0x%X, Discoverable = 0x%X\n",
+		(BT_UART_MSG_FRAME6SNIFFINTERVAL_MSK & uart_msg->frame6) >>
+			BT_UART_MSG_FRAME6SNIFFINTERVAL_POS,
+		(BT_UART_MSG_FRAME6DISCOVERABLE_MSK & uart_msg->frame6) >>
+			BT_UART_MSG_FRAME6DISCOVERABLE_POS);
+
+	IWL_DEBUG_COEX(priv, "Sniff Activity = 0x%X, Page = "
+			"0x%X, Inquiry = 0x%X, Connectable = 0x%X\n",
+		(BT_UART_MSG_FRAME7SNIFFACTIVITY_MSK & uart_msg->frame7) >>
+			BT_UART_MSG_FRAME7SNIFFACTIVITY_POS,
+		(BT_UART_MSG_FRAME7PAGE_MSK & uart_msg->frame7) >>
+			BT_UART_MSG_FRAME7PAGE_POS,
+		(BT_UART_MSG_FRAME7INQUIRY_MSK & uart_msg->frame7) >>
+			BT_UART_MSG_FRAME7INQUIRY_POS,
+		(BT_UART_MSG_FRAME7CONNECTABLE_MSK & uart_msg->frame7) >>
+			BT_UART_MSG_FRAME7CONNECTABLE_POS);
+}
+
+static bool iwlagn_set_kill_msk(struct iwl_priv *priv,
+				struct iwl_bt_uart_msg *uart_msg)
+{
+	bool need_update = false;
+	u8 kill_msk = IWL_BT_KILL_REDUCE;
+	static const __le32 bt_kill_ack_msg[3] = {
+		IWLAGN_BT_KILL_ACK_MASK_DEFAULT,
+		IWLAGN_BT_KILL_ACK_CTS_MASK_SCO,
+		IWLAGN_BT_KILL_ACK_CTS_MASK_REDUCE};
+	static const __le32 bt_kill_cts_msg[3] = {
+		IWLAGN_BT_KILL_CTS_MASK_DEFAULT,
+		IWLAGN_BT_KILL_ACK_CTS_MASK_SCO,
+		IWLAGN_BT_KILL_ACK_CTS_MASK_REDUCE};
+
+	if (!priv->reduced_txpower)
+		kill_msk = (BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3)
+			? IWL_BT_KILL_OVERRIDE : IWL_BT_KILL_DEFAULT;
+	if (priv->kill_ack_mask != bt_kill_ack_msg[kill_msk] ||
+	    priv->kill_cts_mask != bt_kill_cts_msg[kill_msk]) {
+		priv->bt_valid |= IWLAGN_BT_VALID_KILL_ACK_MASK;
+		priv->kill_ack_mask = bt_kill_ack_msg[kill_msk];
+		priv->bt_valid |= IWLAGN_BT_VALID_KILL_CTS_MASK;
+		priv->kill_cts_mask = bt_kill_cts_msg[kill_msk];
+		need_update = true;
+	}
+	return need_update;
+}
+
+/*
+ * Upon RSSI changes, sends a bt config command with following changes
+ *  1. enable/disable "reduced control frames tx power
+ *  2. update the "kill)ack_mask" and "kill_cts_mask"
+ *
+ * If "reduced tx power" is enabled, uCode shall
+ *  1. ACK/Back/CTS rate shall reduced to 6Mbps
+ *  2. not use duplciate 20/40MHz mode
+ */
+static bool iwlagn_fill_txpower_mode(struct iwl_priv *priv,
+				struct iwl_bt_uart_msg *uart_msg)
+{
+	bool need_update = false;
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	int ave_rssi;
+
+	if (!ctx->vif || (ctx->vif->type != NL80211_IFTYPE_STATION)) {
+		IWL_DEBUG_INFO(priv, "BSS ctx not active or not in sta mode\n");
+		return false;
+	}
+
+	ave_rssi = ieee80211_ave_rssi(ctx->vif);
+	if (!ave_rssi) {
+		/* no rssi data, no changes to reduce tx power */
+		IWL_DEBUG_COEX(priv, "no rssi data available\n");
+		return need_update;
+	}
+	if (!priv->reduced_txpower &&
+	    !iwl_is_associated(priv, IWL_RXON_CTX_PAN) &&
+	    (ave_rssi > BT_ENABLE_REDUCED_TXPOWER_THRESHOLD) &&
+	    (uart_msg->frame3 & (BT_UART_MSG_FRAME3ACL_MSK |
+	    BT_UART_MSG_FRAME3OBEX_MSK)) &&
+	    !(uart_msg->frame3 & (BT_UART_MSG_FRAME3SCOESCO_MSK |
+	    BT_UART_MSG_FRAME3SNIFF_MSK | BT_UART_MSG_FRAME3A2DP_MSK))) {
+		/* enabling reduced tx power */
+		priv->reduced_txpower = true;
+		priv->bt_valid |= IWLAGN_BT_VALID_REDUCED_TX_PWR;
+		need_update = true;
+	} else if (priv->reduced_txpower &&
+		   (iwl_is_associated(priv, IWL_RXON_CTX_PAN) ||
+		   (ave_rssi < BT_DISABLE_REDUCED_TXPOWER_THRESHOLD) ||
+		   (uart_msg->frame3 & (BT_UART_MSG_FRAME3SCOESCO_MSK |
+		   BT_UART_MSG_FRAME3SNIFF_MSK | BT_UART_MSG_FRAME3A2DP_MSK)) ||
+		   !(uart_msg->frame3 & (BT_UART_MSG_FRAME3ACL_MSK |
+		   BT_UART_MSG_FRAME3OBEX_MSK)))) {
+		/* disable reduced tx power */
+		priv->reduced_txpower = false;
+		priv->bt_valid |= IWLAGN_BT_VALID_REDUCED_TX_PWR;
+		need_update = true;
+	}
+
+	return need_update;
+}
+
+int iwlagn_bt_coex_profile_notif(struct iwl_priv *priv,
+				  struct iwl_rx_cmd_buffer *rxb,
+				  struct iwl_device_cmd *cmd)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl_bt_coex_profile_notif *coex = (void *)pkt->data;
+	struct iwl_bt_uart_msg *uart_msg = &coex->last_bt_uart_msg;
+
+	if (priv->bt_enable_flag == IWLAGN_BT_FLAG_COEX_MODE_DISABLED) {
+		/* bt coex disabled */
+		return 0;
+	}
+
+	IWL_DEBUG_COEX(priv, "BT Coex notification:\n");
+	IWL_DEBUG_COEX(priv, "    status: %d\n", coex->bt_status);
+	IWL_DEBUG_COEX(priv, "    traffic load: %d\n", coex->bt_traffic_load);
+	IWL_DEBUG_COEX(priv, "    CI compliance: %d\n",
+			coex->bt_ci_compliance);
+	iwlagn_print_uartmsg(priv, uart_msg);
+
+	priv->last_bt_traffic_load = priv->bt_traffic_load;
+	priv->bt_is_sco = iwlagn_bt_traffic_is_sco(uart_msg);
+
+	if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
+		if (priv->bt_status != coex->bt_status ||
+		    priv->last_bt_traffic_load != coex->bt_traffic_load) {
+			if (coex->bt_status) {
+				/* BT on */
+				if (!priv->bt_ch_announce)
+					priv->bt_traffic_load =
+						IWL_BT_COEX_TRAFFIC_LOAD_HIGH;
+				else
+					priv->bt_traffic_load =
+						coex->bt_traffic_load;
+			} else {
+				/* BT off */
+				priv->bt_traffic_load =
+					IWL_BT_COEX_TRAFFIC_LOAD_NONE;
+			}
+			priv->bt_status = coex->bt_status;
+			queue_work(priv->workqueue,
+				   &priv->bt_traffic_change_work);
+		}
+	}
+
+	/* schedule to send runtime bt_config */
+	/* check reduce power before change ack/cts kill mask */
+	if (iwlagn_fill_txpower_mode(priv, uart_msg) ||
+	    iwlagn_set_kill_msk(priv, uart_msg))
+		queue_work(priv->workqueue, &priv->bt_runtime_config);
+
+
+	/* FIXME: based on notification, adjust the prio_boost */
+
+	priv->bt_ci_compliance = coex->bt_ci_compliance;
+	return 0;
+}
+
+void iwlagn_bt_rx_handler_setup(struct iwl_priv *priv)
+{
+	priv->rx_handlers[REPLY_BT_COEX_PROFILE_NOTIF] =
+		iwlagn_bt_coex_profile_notif;
+}
+
+void iwlagn_bt_setup_deferred_work(struct iwl_priv *priv)
+{
+	INIT_WORK(&priv->bt_traffic_change_work,
+		  iwlagn_bt_traffic_change_work);
+}
+
+void iwlagn_bt_cancel_deferred_work(struct iwl_priv *priv)
+{
+	cancel_work_sync(&priv->bt_traffic_change_work);
+}
+
+static bool is_single_rx_stream(struct iwl_priv *priv)
+{
+	return priv->current_ht_config.smps == IEEE80211_SMPS_STATIC ||
+	       priv->current_ht_config.single_chain_sufficient;
+}
+
+#define IWL_NUM_RX_CHAINS_MULTIPLE	3
+#define IWL_NUM_RX_CHAINS_SINGLE	2
+#define IWL_NUM_IDLE_CHAINS_DUAL	2
+#define IWL_NUM_IDLE_CHAINS_SINGLE	1
+
+/*
+ * Determine how many receiver/antenna chains to use.
+ *
+ * More provides better reception via diversity.  Fewer saves power
+ * at the expense of throughput, but only when not in powersave to
+ * start with.
+ *
+ * MIMO (dual stream) requires at least 2, but works better with 3.
+ * This does not determine *which* chains to use, just how many.
+ */
+static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
+{
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist &&
+	    (priv->bt_full_concurrent ||
+	     priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) {
+		/*
+		 * only use chain 'A' in bt high traffic load or
+		 * full concurrency mode
+		 */
+		return IWL_NUM_RX_CHAINS_SINGLE;
+	}
+	/* # of Rx chains to use when expecting MIMO. */
+	if (is_single_rx_stream(priv))
+		return IWL_NUM_RX_CHAINS_SINGLE;
+	else
+		return IWL_NUM_RX_CHAINS_MULTIPLE;
+}
+
+/*
+ * When we are in power saving mode, unless device support spatial
+ * multiplexing power save, use the active count for rx chain count.
+ */
+static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
+{
+	/* # Rx chains when idling, depending on SMPS mode */
+	switch (priv->current_ht_config.smps) {
+	case IEEE80211_SMPS_STATIC:
+	case IEEE80211_SMPS_DYNAMIC:
+		return IWL_NUM_IDLE_CHAINS_SINGLE;
+	case IEEE80211_SMPS_AUTOMATIC:
+	case IEEE80211_SMPS_OFF:
+		return active_cnt;
+	default:
+		WARN(1, "invalid SMPS mode %d",
+		     priv->current_ht_config.smps);
+		return active_cnt;
+	}
+}
+
+/* up to 4 chains */
+static u8 iwl_count_chain_bitmap(u32 chain_bitmap)
+{
+	u8 res;
+	res = (chain_bitmap & BIT(0)) >> 0;
+	res += (chain_bitmap & BIT(1)) >> 1;
+	res += (chain_bitmap & BIT(2)) >> 2;
+	res += (chain_bitmap & BIT(3)) >> 3;
+	return res;
+}
+
+/**
+ * iwlagn_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
+ *
+ * Selects how many and which Rx receivers/antennas/chains to use.
+ * This should not be used for scan command ... it puts data in wrong place.
+ */
+void iwlagn_set_rxon_chain(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
+{
+	bool is_single = is_single_rx_stream(priv);
+	bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
+	u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt;
+	u32 active_chains;
+	u16 rx_chain;
+
+	/* Tell uCode which antennas are actually connected.
+	 * Before first association, we assume all antennas are connected.
+	 * Just after first association, iwl_chain_noise_calibration()
+	 *    checks which antennas actually *are* connected. */
+	if (priv->chain_noise_data.active_chains)
+		active_chains = priv->chain_noise_data.active_chains;
+	else
+		active_chains = priv->eeprom_data->valid_rx_ant;
+
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist &&
+	    (priv->bt_full_concurrent ||
+	     priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) {
+		/*
+		 * only use chain 'A' in bt high traffic load or
+		 * full concurrency mode
+		 */
+		active_chains = first_antenna(active_chains);
+	}
+
+	rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS;
+
+	/* How many receivers should we use? */
+	active_rx_cnt = iwl_get_active_rx_chain_count(priv);
+	idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt);
+
+
+	/* correct rx chain count according hw settings
+	 * and chain noise calibration
+	 */
+	valid_rx_cnt = iwl_count_chain_bitmap(active_chains);
+	if (valid_rx_cnt < active_rx_cnt)
+		active_rx_cnt = valid_rx_cnt;
+
+	if (valid_rx_cnt < idle_rx_cnt)
+		idle_rx_cnt = valid_rx_cnt;
+
+	rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
+	rx_chain |= idle_rx_cnt  << RXON_RX_CHAIN_CNT_POS;
+
+	ctx->staging.rx_chain = cpu_to_le16(rx_chain);
+
+	if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam)
+		ctx->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
+	else
+		ctx->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
+
+	IWL_DEBUG_ASSOC(priv, "rx_chain=0x%X active=%d idle=%d\n",
+			ctx->staging.rx_chain,
+			active_rx_cnt, idle_rx_cnt);
+
+	WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
+		active_rx_cnt < idle_rx_cnt);
+}
+
+u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant, u8 valid)
+{
+	int i;
+	u8 ind = ant;
+
+	if (priv->band == IEEE80211_BAND_2GHZ &&
+	    priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)
+		return 0;
+
+	for (i = 0; i < RATE_ANT_NUM - 1; i++) {
+		ind = (ind + 1) < RATE_ANT_NUM ?  ind + 1 : 0;
+		if (valid & BIT(ind))
+			return ind;
+	}
+	return ant;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void iwlagn_convert_p1k(u16 *p1k, __le16 *out)
+{
+	int i;
+
+	for (i = 0; i < IWLAGN_P1K_SIZE; i++)
+		out[i] = cpu_to_le16(p1k[i]);
+}
+
+struct wowlan_key_data {
+	struct iwl_rxon_context *ctx;
+	struct iwlagn_wowlan_rsc_tsc_params_cmd *rsc_tsc;
+	struct iwlagn_wowlan_tkip_params_cmd *tkip;
+	const u8 *bssid;
+	bool error, use_rsc_tsc, use_tkip;
+};
+
+
+static void iwlagn_wowlan_program_keys(struct ieee80211_hw *hw,
+			       struct ieee80211_vif *vif,
+			       struct ieee80211_sta *sta,
+			       struct ieee80211_key_conf *key,
+			       void *_data)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	struct wowlan_key_data *data = _data;
+	struct iwl_rxon_context *ctx = data->ctx;
+	struct aes_sc *aes_sc, *aes_tx_sc = NULL;
+	struct tkip_sc *tkip_sc, *tkip_tx_sc = NULL;
+	struct iwlagn_p1k_cache *rx_p1ks;
+	u8 *rx_mic_key;
+	struct ieee80211_key_seq seq;
+	u32 cur_rx_iv32 = 0;
+	u16 p1k[IWLAGN_P1K_SIZE];
+	int ret, i;
+
+	mutex_lock(&priv->mutex);
+
+	if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
+	     key->cipher == WLAN_CIPHER_SUITE_WEP104) &&
+	     !sta && !ctx->key_mapping_keys)
+		ret = iwl_set_default_wep_key(priv, ctx, key);
+	else
+		ret = iwl_set_dynamic_key(priv, ctx, key, sta);
+
+	if (ret) {
+		IWL_ERR(priv, "Error setting key during suspend!\n");
+		data->error = true;
+	}
+
+	switch (key->cipher) {
+	case WLAN_CIPHER_SUITE_TKIP:
+		if (sta) {
+			tkip_sc = data->rsc_tsc->all_tsc_rsc.tkip.unicast_rsc;
+			tkip_tx_sc = &data->rsc_tsc->all_tsc_rsc.tkip.tsc;
+
+			rx_p1ks = data->tkip->rx_uni;
+
+			ieee80211_get_key_tx_seq(key, &seq);
+			tkip_tx_sc->iv16 = cpu_to_le16(seq.tkip.iv16);
+			tkip_tx_sc->iv32 = cpu_to_le32(seq.tkip.iv32);
+
+			ieee80211_get_tkip_p1k_iv(key, seq.tkip.iv32, p1k);
+			iwlagn_convert_p1k(p1k, data->tkip->tx.p1k);
+
+			memcpy(data->tkip->mic_keys.tx,
+			       &key->key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY],
+			       IWLAGN_MIC_KEY_SIZE);
+
+			rx_mic_key = data->tkip->mic_keys.rx_unicast;
+		} else {
+			tkip_sc =
+				data->rsc_tsc->all_tsc_rsc.tkip.multicast_rsc;
+			rx_p1ks = data->tkip->rx_multi;
+			rx_mic_key = data->tkip->mic_keys.rx_mcast;
+		}
+
+		/*
+		 * For non-QoS this relies on the fact that both the uCode and
+		 * mac80211 use TID 0 (as they need to to avoid replay attacks)
+		 * for checking the IV in the frames.
+		 */
+		for (i = 0; i < IWLAGN_NUM_RSC; i++) {
+			ieee80211_get_key_rx_seq(key, i, &seq);
+			tkip_sc[i].iv16 = cpu_to_le16(seq.tkip.iv16);
+			tkip_sc[i].iv32 = cpu_to_le32(seq.tkip.iv32);
+			/* wrapping isn't allowed, AP must rekey */
+			if (seq.tkip.iv32 > cur_rx_iv32)
+				cur_rx_iv32 = seq.tkip.iv32;
+		}
+
+		ieee80211_get_tkip_rx_p1k(key, data->bssid, cur_rx_iv32, p1k);
+		iwlagn_convert_p1k(p1k, rx_p1ks[0].p1k);
+		ieee80211_get_tkip_rx_p1k(key, data->bssid,
+					  cur_rx_iv32 + 1, p1k);
+		iwlagn_convert_p1k(p1k, rx_p1ks[1].p1k);
+
+		memcpy(rx_mic_key,
+		       &key->key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY],
+		       IWLAGN_MIC_KEY_SIZE);
+
+		data->use_tkip = true;
+		data->use_rsc_tsc = true;
+		break;
+	case WLAN_CIPHER_SUITE_CCMP:
+		if (sta) {
+			u8 *pn = seq.ccmp.pn;
+
+			aes_sc = data->rsc_tsc->all_tsc_rsc.aes.unicast_rsc;
+			aes_tx_sc = &data->rsc_tsc->all_tsc_rsc.aes.tsc;
+
+			ieee80211_get_key_tx_seq(key, &seq);
+			aes_tx_sc->pn = cpu_to_le64(
+					(u64)pn[5] |
+					((u64)pn[4] << 8) |
+					((u64)pn[3] << 16) |
+					((u64)pn[2] << 24) |
+					((u64)pn[1] << 32) |
+					((u64)pn[0] << 40));
+		} else
+			aes_sc = data->rsc_tsc->all_tsc_rsc.aes.multicast_rsc;
+
+		/*
+		 * For non-QoS this relies on the fact that both the uCode and
+		 * mac80211 use TID 0 for checking the IV in the frames.
+		 */
+		for (i = 0; i < IWLAGN_NUM_RSC; i++) {
+			u8 *pn = seq.ccmp.pn;
+
+			ieee80211_get_key_rx_seq(key, i, &seq);
+			aes_sc->pn = cpu_to_le64(
+					(u64)pn[5] |
+					((u64)pn[4] << 8) |
+					((u64)pn[3] << 16) |
+					((u64)pn[2] << 24) |
+					((u64)pn[1] << 32) |
+					((u64)pn[0] << 40));
+		}
+		data->use_rsc_tsc = true;
+		break;
+	}
+
+	mutex_unlock(&priv->mutex);
+}
+
+int iwlagn_send_patterns(struct iwl_priv *priv,
+			struct cfg80211_wowlan *wowlan)
+{
+	struct iwlagn_wowlan_patterns_cmd *pattern_cmd;
+	struct iwl_host_cmd cmd = {
+		.id = REPLY_WOWLAN_PATTERNS,
+		.dataflags[0] = IWL_HCMD_DFL_NOCOPY,
+		.flags = CMD_SYNC,
+	};
+	int i, err;
+
+	if (!wowlan->n_patterns)
+		return 0;
+
+	cmd.len[0] = sizeof(*pattern_cmd) +
+		wowlan->n_patterns * sizeof(struct iwlagn_wowlan_pattern);
+
+	pattern_cmd = kmalloc(cmd.len[0], GFP_KERNEL);
+	if (!pattern_cmd)
+		return -ENOMEM;
+
+	pattern_cmd->n_patterns = cpu_to_le32(wowlan->n_patterns);
+
+	for (i = 0; i < wowlan->n_patterns; i++) {
+		int mask_len = DIV_ROUND_UP(wowlan->patterns[i].pattern_len, 8);
+
+		memcpy(&pattern_cmd->patterns[i].mask,
+			wowlan->patterns[i].mask, mask_len);
+		memcpy(&pattern_cmd->patterns[i].pattern,
+			wowlan->patterns[i].pattern,
+			wowlan->patterns[i].pattern_len);
+		pattern_cmd->patterns[i].mask_size = mask_len;
+		pattern_cmd->patterns[i].pattern_size =
+			wowlan->patterns[i].pattern_len;
+	}
+
+	cmd.data[0] = pattern_cmd;
+	err = iwl_dvm_send_cmd(priv, &cmd);
+	kfree(pattern_cmd);
+	return err;
+}
+
+int iwlagn_suspend(struct iwl_priv *priv, struct cfg80211_wowlan *wowlan)
+{
+	struct iwlagn_wowlan_wakeup_filter_cmd wakeup_filter_cmd;
+	struct iwl_rxon_cmd rxon;
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	struct iwlagn_wowlan_kek_kck_material_cmd kek_kck_cmd;
+	struct iwlagn_wowlan_tkip_params_cmd tkip_cmd = {};
+	struct iwlagn_d3_config_cmd d3_cfg_cmd = {};
+	struct wowlan_key_data key_data = {
+		.ctx = ctx,
+		.bssid = ctx->active.bssid_addr,
+		.use_rsc_tsc = false,
+		.tkip = &tkip_cmd,
+		.use_tkip = false,
+	};
+	int ret, i;
+	u16 seq;
+
+	key_data.rsc_tsc = kzalloc(sizeof(*key_data.rsc_tsc), GFP_KERNEL);
+	if (!key_data.rsc_tsc)
+		return -ENOMEM;
+
+	memset(&wakeup_filter_cmd, 0, sizeof(wakeup_filter_cmd));
+
+	/*
+	 * We know the last used seqno, and the uCode expects to know that
+	 * one, it will increment before TX.
+	 */
+	seq = le16_to_cpu(priv->last_seq_ctl) & IEEE80211_SCTL_SEQ;
+	wakeup_filter_cmd.non_qos_seq = cpu_to_le16(seq);
+
+	/*
+	 * For QoS counters, we store the one to use next, so subtract 0x10
+	 * since the uCode will add 0x10 before using the value.
+	 */
+	for (i = 0; i < IWL_MAX_TID_COUNT; i++) {
+		seq = priv->tid_data[IWL_AP_ID][i].seq_number;
+		seq -= 0x10;
+		wakeup_filter_cmd.qos_seq[i] = cpu_to_le16(seq);
+	}
+
+	if (wowlan->disconnect)
+		wakeup_filter_cmd.enabled |=
+			cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_BEACON_MISS |
+				    IWLAGN_WOWLAN_WAKEUP_LINK_CHANGE);
+	if (wowlan->magic_pkt)
+		wakeup_filter_cmd.enabled |=
+			cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_MAGIC_PACKET);
+	if (wowlan->gtk_rekey_failure)
+		wakeup_filter_cmd.enabled |=
+			cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_GTK_REKEY_FAIL);
+	if (wowlan->eap_identity_req)
+		wakeup_filter_cmd.enabled |=
+			cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_EAP_IDENT_REQ);
+	if (wowlan->four_way_handshake)
+		wakeup_filter_cmd.enabled |=
+			cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_4WAY_HANDSHAKE);
+	if (wowlan->n_patterns)
+		wakeup_filter_cmd.enabled |=
+			cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_PATTERN_MATCH);
+
+	if (wowlan->rfkill_release)
+		d3_cfg_cmd.wakeup_flags |=
+			cpu_to_le32(IWLAGN_D3_WAKEUP_RFKILL);
+
+	iwl_scan_cancel_timeout(priv, 200);
+
+	memcpy(&rxon, &ctx->active, sizeof(rxon));
+
+	priv->ucode_loaded = false;
+	iwl_trans_stop_device(priv->trans);
+
+	priv->wowlan = true;
+
+	ret = iwl_load_ucode_wait_alive(priv, IWL_UCODE_WOWLAN);
+	if (ret)
+		goto out;
+
+	/* now configure WoWLAN ucode */
+	ret = iwl_alive_start(priv);
+	if (ret)
+		goto out;
+
+	memcpy(&ctx->staging, &rxon, sizeof(rxon));
+	ret = iwlagn_commit_rxon(priv, ctx);
+	if (ret)
+		goto out;
+
+	ret = iwl_power_update_mode(priv, true);
+	if (ret)
+		goto out;
+
+	if (!iwlwifi_mod_params.sw_crypto) {
+		/* mark all keys clear */
+		priv->ucode_key_table = 0;
+		ctx->key_mapping_keys = 0;
+
+		/*
+		 * This needs to be unlocked due to lock ordering
+		 * constraints. Since we're in the suspend path
+		 * that isn't really a problem though.
+		 */
+		mutex_unlock(&priv->mutex);
+		ieee80211_iter_keys(priv->hw, ctx->vif,
+				    iwlagn_wowlan_program_keys,
+				    &key_data);
+		mutex_lock(&priv->mutex);
+		if (key_data.error) {
+			ret = -EIO;
+			goto out;
+		}
+
+		if (key_data.use_rsc_tsc) {
+			struct iwl_host_cmd rsc_tsc_cmd = {
+				.id = REPLY_WOWLAN_TSC_RSC_PARAMS,
+				.flags = CMD_SYNC,
+				.data[0] = key_data.rsc_tsc,
+				.dataflags[0] = IWL_HCMD_DFL_NOCOPY,
+				.len[0] = sizeof(*key_data.rsc_tsc),
+			};
+
+			ret = iwl_dvm_send_cmd(priv, &rsc_tsc_cmd);
+			if (ret)
+				goto out;
+		}
+
+		if (key_data.use_tkip) {
+			ret = iwl_dvm_send_cmd_pdu(priv,
+						 REPLY_WOWLAN_TKIP_PARAMS,
+						 CMD_SYNC, sizeof(tkip_cmd),
+						 &tkip_cmd);
+			if (ret)
+				goto out;
+		}
+
+		if (priv->have_rekey_data) {
+			memset(&kek_kck_cmd, 0, sizeof(kek_kck_cmd));
+			memcpy(kek_kck_cmd.kck, priv->kck, NL80211_KCK_LEN);
+			kek_kck_cmd.kck_len = cpu_to_le16(NL80211_KCK_LEN);
+			memcpy(kek_kck_cmd.kek, priv->kek, NL80211_KEK_LEN);
+			kek_kck_cmd.kek_len = cpu_to_le16(NL80211_KEK_LEN);
+			kek_kck_cmd.replay_ctr = priv->replay_ctr;
+
+			ret = iwl_dvm_send_cmd_pdu(priv,
+						 REPLY_WOWLAN_KEK_KCK_MATERIAL,
+						 CMD_SYNC, sizeof(kek_kck_cmd),
+						 &kek_kck_cmd);
+			if (ret)
+				goto out;
+		}
+	}
+
+	ret = iwl_dvm_send_cmd_pdu(priv, REPLY_D3_CONFIG, CMD_SYNC,
+				     sizeof(d3_cfg_cmd), &d3_cfg_cmd);
+	if (ret)
+		goto out;
+
+	ret = iwl_dvm_send_cmd_pdu(priv, REPLY_WOWLAN_WAKEUP_FILTER,
+				 CMD_SYNC, sizeof(wakeup_filter_cmd),
+				 &wakeup_filter_cmd);
+	if (ret)
+		goto out;
+
+	ret = iwlagn_send_patterns(priv, wowlan);
+ out:
+	kfree(key_data.rsc_tsc);
+	return ret;
+}
+#endif
+
+int iwl_dvm_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
+{
+	if (iwl_is_rfkill(priv) || iwl_is_ctkill(priv)) {
+		IWL_WARN(priv, "Not sending command - %s KILL\n",
+			 iwl_is_rfkill(priv) ? "RF" : "CT");
+		return -EIO;
+	}
+
+	if (test_bit(STATUS_FW_ERROR, &priv->status)) {
+		IWL_ERR(priv, "Command %s failed: FW Error\n",
+			iwl_dvm_get_cmd_string(cmd->id));
+		return -EIO;
+	}
+
+	/*
+	 * Synchronous commands from this op-mode must hold
+	 * the mutex, this ensures we don't try to send two
+	 * (or more) synchronous commands at a time.
+	 */
+	if (!(cmd->flags & CMD_ASYNC))
+		lockdep_assert_held(&priv->mutex);
+
+	if (priv->ucode_owner == IWL_OWNERSHIP_TM &&
+	    !(cmd->flags & CMD_ON_DEMAND)) {
+		IWL_DEBUG_HC(priv, "tm own the uCode, no regular hcmd send\n");
+		return -EIO;
+	}
+
+	return iwl_trans_send_cmd(priv->trans, cmd);
+}
+
+int iwl_dvm_send_cmd_pdu(struct iwl_priv *priv, u8 id,
+			 u32 flags, u16 len, const void *data)
+{
+	struct iwl_host_cmd cmd = {
+		.id = id,
+		.len = { len, },
+		.data = { data, },
+		.flags = flags,
+	};
+
+	return iwl_dvm_send_cmd(priv, &cmd);
+}
diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
new file mode 100644
index 00000000000..b83ca358eb1
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c
@@ -0,0 +1,1640 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are derived from the ipw3945 project, as well
+ * as portions of the ieee80211 subsystem header files.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/if_arp.h>
+
+#include <net/ieee80211_radiotap.h>
+#include <net/mac80211.h>
+
+#include <asm/div64.h>
+
+#include "iwl-io.h"
+#include "iwl-trans.h"
+#include "iwl-op-mode.h"
+#include "iwl-modparams.h"
+
+#include "dev.h"
+#include "calib.h"
+#include "agn.h"
+
+/*****************************************************************************
+ *
+ * mac80211 entry point functions
+ *
+ *****************************************************************************/
+
+static const struct ieee80211_iface_limit iwlagn_sta_ap_limits[] = {
+	{
+		.max = 1,
+		.types = BIT(NL80211_IFTYPE_STATION),
+	},
+	{
+		.max = 1,
+		.types = BIT(NL80211_IFTYPE_AP),
+	},
+};
+
+static const struct ieee80211_iface_limit iwlagn_2sta_limits[] = {
+	{
+		.max = 2,
+		.types = BIT(NL80211_IFTYPE_STATION),
+	},
+};
+
+static const struct ieee80211_iface_limit iwlagn_p2p_sta_go_limits[] = {
+	{
+		.max = 1,
+		.types = BIT(NL80211_IFTYPE_STATION),
+	},
+	{
+		.max = 1,
+		.types = BIT(NL80211_IFTYPE_P2P_GO) |
+			 BIT(NL80211_IFTYPE_AP),
+	},
+};
+
+static const struct ieee80211_iface_limit iwlagn_p2p_2sta_limits[] = {
+	{
+		.max = 2,
+		.types = BIT(NL80211_IFTYPE_STATION),
+	},
+	{
+		.max = 1,
+		.types = BIT(NL80211_IFTYPE_P2P_CLIENT),
+	},
+};
+
+static const struct ieee80211_iface_combination
+iwlagn_iface_combinations_dualmode[] = {
+	{ .num_different_channels = 1,
+	  .max_interfaces = 2,
+	  .beacon_int_infra_match = true,
+	  .limits = iwlagn_sta_ap_limits,
+	  .n_limits = ARRAY_SIZE(iwlagn_sta_ap_limits),
+	},
+	{ .num_different_channels = 1,
+	  .max_interfaces = 2,
+	  .limits = iwlagn_2sta_limits,
+	  .n_limits = ARRAY_SIZE(iwlagn_2sta_limits),
+	},
+};
+
+static const struct ieee80211_iface_combination
+iwlagn_iface_combinations_p2p[] = {
+	{ .num_different_channels = 1,
+	  .max_interfaces = 2,
+	  .beacon_int_infra_match = true,
+	  .limits = iwlagn_p2p_sta_go_limits,
+	  .n_limits = ARRAY_SIZE(iwlagn_p2p_sta_go_limits),
+	},
+	{ .num_different_channels = 1,
+	  .max_interfaces = 2,
+	  .limits = iwlagn_p2p_2sta_limits,
+	  .n_limits = ARRAY_SIZE(iwlagn_p2p_2sta_limits),
+	},
+};
+
+/*
+ * Not a mac80211 entry point function, but it fits in with all the
+ * other mac80211 functions grouped here.
+ */
+int iwlagn_mac_setup_register(struct iwl_priv *priv,
+			      const struct iwl_ucode_capabilities *capa)
+{
+	int ret;
+	struct ieee80211_hw *hw = priv->hw;
+	struct iwl_rxon_context *ctx;
+
+	hw->rate_control_algorithm = "iwl-agn-rs";
+
+	/* Tell mac80211 our characteristics */
+	hw->flags = IEEE80211_HW_SIGNAL_DBM |
+		    IEEE80211_HW_AMPDU_AGGREGATION |
+		    IEEE80211_HW_NEED_DTIM_PERIOD |
+		    IEEE80211_HW_SPECTRUM_MGMT |
+		    IEEE80211_HW_REPORTS_TX_ACK_STATUS |
+		    IEEE80211_HW_QUEUE_CONTROL |
+		    IEEE80211_HW_SUPPORTS_PS |
+		    IEEE80211_HW_SUPPORTS_DYNAMIC_PS |
+		    IEEE80211_HW_WANT_MONITOR_VIF |
+		    IEEE80211_HW_SCAN_WHILE_IDLE;
+
+	hw->offchannel_tx_hw_queue = IWL_AUX_QUEUE;
+	hw->radiotap_mcs_details |= IEEE80211_RADIOTAP_MCS_HAVE_FMT;
+
+	/*
+	 * Including the following line will crash some AP's.  This
+	 * workaround removes the stimulus which causes the crash until
+	 * the AP software can be fixed.
+	hw->max_tx_aggregation_subframes = LINK_QUAL_AGG_FRAME_LIMIT_DEF;
+	 */
+
+	if (priv->eeprom_data->sku & EEPROM_SKU_CAP_11N_ENABLE)
+		hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
+			     IEEE80211_HW_SUPPORTS_STATIC_SMPS;
+
+#ifndef CONFIG_IWLWIFI_EXPERIMENTAL_MFP
+	/* enable 11w if the uCode advertise */
+	if (capa->flags & IWL_UCODE_TLV_FLAGS_MFP)
+#endif /* !CONFIG_IWLWIFI_EXPERIMENTAL_MFP */
+		hw->flags |= IEEE80211_HW_MFP_CAPABLE;
+
+	hw->sta_data_size = sizeof(struct iwl_station_priv);
+	hw->vif_data_size = sizeof(struct iwl_vif_priv);
+
+	for_each_context(priv, ctx) {
+		hw->wiphy->interface_modes |= ctx->interface_modes;
+		hw->wiphy->interface_modes |= ctx->exclusive_interface_modes;
+	}
+
+	BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
+
+	if (hw->wiphy->interface_modes & BIT(NL80211_IFTYPE_P2P_CLIENT)) {
+		hw->wiphy->iface_combinations = iwlagn_iface_combinations_p2p;
+		hw->wiphy->n_iface_combinations =
+			ARRAY_SIZE(iwlagn_iface_combinations_p2p);
+	} else if (hw->wiphy->interface_modes & BIT(NL80211_IFTYPE_AP)) {
+		hw->wiphy->iface_combinations =
+			iwlagn_iface_combinations_dualmode;
+		hw->wiphy->n_iface_combinations =
+			ARRAY_SIZE(iwlagn_iface_combinations_dualmode);
+	}
+
+	hw->wiphy->max_remain_on_channel_duration = 1000;
+
+	hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
+			    WIPHY_FLAG_DISABLE_BEACON_HINTS |
+			    WIPHY_FLAG_IBSS_RSN;
+
+#ifdef CONFIG_PM_SLEEP
+	if (priv->fw->img[IWL_UCODE_WOWLAN].sec[0].len &&
+	    priv->trans->ops->wowlan_suspend &&
+	    device_can_wakeup(priv->trans->dev)) {
+		hw->wiphy->wowlan.flags = WIPHY_WOWLAN_MAGIC_PKT |
+					  WIPHY_WOWLAN_DISCONNECT |
+					  WIPHY_WOWLAN_EAP_IDENTITY_REQ |
+					  WIPHY_WOWLAN_RFKILL_RELEASE;
+		if (!iwlwifi_mod_params.sw_crypto)
+			hw->wiphy->wowlan.flags |=
+				WIPHY_WOWLAN_SUPPORTS_GTK_REKEY |
+				WIPHY_WOWLAN_GTK_REKEY_FAILURE;
+
+		hw->wiphy->wowlan.n_patterns = IWLAGN_WOWLAN_MAX_PATTERNS;
+		hw->wiphy->wowlan.pattern_min_len =
+					IWLAGN_WOWLAN_MIN_PATTERN_LEN;
+		hw->wiphy->wowlan.pattern_max_len =
+					IWLAGN_WOWLAN_MAX_PATTERN_LEN;
+	}
+#endif
+
+	if (iwlwifi_mod_params.power_save)
+		hw->wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT;
+	else
+		hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+
+	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
+	/* we create the 802.11 header and a max-length SSID element */
+	hw->wiphy->max_scan_ie_len = capa->max_probe_length - 24 - 34;
+
+	/*
+	 * We don't use all queues: 4 and 9 are unused and any
+	 * aggregation queue gets mapped down to the AC queue.
+	 */
+	hw->queues = IWLAGN_FIRST_AMPDU_QUEUE;
+
+	hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
+
+	if (priv->eeprom_data->bands[IEEE80211_BAND_2GHZ].n_channels)
+		priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+			&priv->eeprom_data->bands[IEEE80211_BAND_2GHZ];
+	if (priv->eeprom_data->bands[IEEE80211_BAND_5GHZ].n_channels)
+		priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
+			&priv->eeprom_data->bands[IEEE80211_BAND_5GHZ];
+
+	hw->wiphy->hw_version = priv->trans->hw_id;
+
+	iwl_leds_init(priv);
+
+	ret = ieee80211_register_hw(priv->hw);
+	if (ret) {
+		IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
+		iwl_leds_exit(priv);
+		return ret;
+	}
+	priv->mac80211_registered = 1;
+
+	return 0;
+}
+
+void iwlagn_mac_unregister(struct iwl_priv *priv)
+{
+	if (!priv->mac80211_registered)
+		return;
+	iwl_leds_exit(priv);
+	ieee80211_unregister_hw(priv->hw);
+	priv->mac80211_registered = 0;
+}
+
+static int __iwl_up(struct iwl_priv *priv)
+{
+	struct iwl_rxon_context *ctx;
+	int ret;
+
+	lockdep_assert_held(&priv->mutex);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
+		IWL_WARN(priv, "Exit pending; will not bring the NIC up\n");
+		return -EIO;
+	}
+
+	for_each_context(priv, ctx) {
+		ret = iwlagn_alloc_bcast_station(priv, ctx);
+		if (ret) {
+			iwl_dealloc_bcast_stations(priv);
+			return ret;
+		}
+	}
+
+	ret = iwl_run_init_ucode(priv);
+	if (ret) {
+		IWL_ERR(priv, "Failed to run INIT ucode: %d\n", ret);
+		goto error;
+	}
+
+	ret = iwl_load_ucode_wait_alive(priv, IWL_UCODE_REGULAR);
+	if (ret) {
+		IWL_ERR(priv, "Failed to start RT ucode: %d\n", ret);
+		goto error;
+	}
+
+	ret = iwl_alive_start(priv);
+	if (ret)
+		goto error;
+	return 0;
+
+ error:
+	set_bit(STATUS_EXIT_PENDING, &priv->status);
+	iwl_down(priv);
+	clear_bit(STATUS_EXIT_PENDING, &priv->status);
+
+	IWL_ERR(priv, "Unable to initialize device.\n");
+	return ret;
+}
+
+static int iwlagn_mac_start(struct ieee80211_hw *hw)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	int ret;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	/* we should be verifying the device is ready to be opened */
+	mutex_lock(&priv->mutex);
+	ret = __iwl_up(priv);
+	mutex_unlock(&priv->mutex);
+	if (ret)
+		return ret;
+
+	IWL_DEBUG_INFO(priv, "Start UP work done.\n");
+
+	/* Now we should be done, and the READY bit should be set. */
+	if (WARN_ON(!test_bit(STATUS_READY, &priv->status)))
+		ret = -EIO;
+
+	iwlagn_led_enable(priv);
+
+	priv->is_open = 1;
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+	return 0;
+}
+
+static void iwlagn_mac_stop(struct ieee80211_hw *hw)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	if (!priv->is_open)
+		return;
+
+	priv->is_open = 0;
+
+	mutex_lock(&priv->mutex);
+	iwl_down(priv);
+	mutex_unlock(&priv->mutex);
+
+	iwl_cancel_deferred_work(priv);
+
+	flush_workqueue(priv->workqueue);
+
+	/* User space software may expect getting rfkill changes
+	 * even if interface is down, trans->down will leave the RF
+	 * kill interrupt enabled
+	 */
+	iwl_trans_stop_hw(priv->trans, false);
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+}
+
+static void iwlagn_mac_set_rekey_data(struct ieee80211_hw *hw,
+				      struct ieee80211_vif *vif,
+				      struct cfg80211_gtk_rekey_data *data)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+
+	if (iwlwifi_mod_params.sw_crypto)
+		return;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+	mutex_lock(&priv->mutex);
+
+	if (priv->contexts[IWL_RXON_CTX_BSS].vif != vif)
+		goto out;
+
+	memcpy(priv->kek, data->kek, NL80211_KEK_LEN);
+	memcpy(priv->kck, data->kck, NL80211_KCK_LEN);
+	priv->replay_ctr =
+		cpu_to_le64(be64_to_cpup((__be64 *)&data->replay_ctr));
+	priv->have_rekey_data = true;
+
+ out:
+	mutex_unlock(&priv->mutex);
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int iwlagn_mac_suspend(struct ieee80211_hw *hw,
+			      struct cfg80211_wowlan *wowlan)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	int ret;
+
+	if (WARN_ON(!wowlan))
+		return -EINVAL;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+	mutex_lock(&priv->mutex);
+
+	/* Don't attempt WoWLAN when not associated, tear down instead. */
+	if (!ctx->vif || ctx->vif->type != NL80211_IFTYPE_STATION ||
+	    !iwl_is_associated_ctx(ctx)) {
+		ret = 1;
+		goto out;
+	}
+
+	ret = iwlagn_suspend(priv, wowlan);
+	if (ret)
+		goto error;
+
+	iwl_trans_wowlan_suspend(priv->trans);
+
+	goto out;
+
+ error:
+	priv->wowlan = false;
+	iwlagn_prepare_restart(priv);
+	ieee80211_restart_hw(priv->hw);
+ out:
+	mutex_unlock(&priv->mutex);
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+
+	return ret;
+}
+
+static int iwlagn_mac_resume(struct ieee80211_hw *hw)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	struct ieee80211_vif *vif;
+	unsigned long flags;
+	u32 base, status = 0xffffffff;
+	int ret = -EIO;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+	mutex_lock(&priv->mutex);
+
+	iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_CLR,
+			  CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE);
+
+	base = priv->device_pointers.error_event_table;
+	if (iwlagn_hw_valid_rtc_data_addr(base)) {
+		spin_lock_irqsave(&priv->trans->reg_lock, flags);
+		ret = iwl_grab_nic_access_silent(priv->trans);
+		if (likely(ret == 0)) {
+			iwl_write32(priv->trans, HBUS_TARG_MEM_RADDR, base);
+			status = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT);
+			iwl_release_nic_access(priv->trans);
+		}
+		spin_unlock_irqrestore(&priv->trans->reg_lock, flags);
+
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+		if (ret == 0) {
+			const struct fw_img *img;
+
+			img = &(priv->fw->img[IWL_UCODE_WOWLAN]);
+			if (!priv->wowlan_sram) {
+				priv->wowlan_sram =
+				   kzalloc(img->sec[IWL_UCODE_SECTION_DATA].len,
+						GFP_KERNEL);
+			}
+
+			if (priv->wowlan_sram)
+				_iwl_read_targ_mem_dwords(
+				      priv->trans, 0x800000,
+				      priv->wowlan_sram,
+				      img->sec[IWL_UCODE_SECTION_DATA].len / 4);
+		}
+#endif
+	}
+
+	/* we'll clear ctx->vif during iwlagn_prepare_restart() */
+	vif = ctx->vif;
+
+	priv->wowlan = false;
+
+	iwlagn_prepare_restart(priv);
+
+	memset((void *)&ctx->active, 0, sizeof(ctx->active));
+	iwl_connection_init_rx_config(priv, ctx);
+	iwlagn_set_rxon_chain(priv, ctx);
+
+	mutex_unlock(&priv->mutex);
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+
+	ieee80211_resume_disconnect(vif);
+
+	return 1;
+}
+
+static void iwlagn_mac_set_wakeup(struct ieee80211_hw *hw, bool enabled)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+
+	device_set_wakeup_enable(priv->trans->dev, enabled);
+}
+#endif
+
+static void iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+
+	IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
+		     ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
+
+	if (iwlagn_tx_skb(priv, skb))
+		dev_kfree_skb_any(skb);
+}
+
+static void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw,
+				       struct ieee80211_vif *vif,
+				       struct ieee80211_key_conf *keyconf,
+				       struct ieee80211_sta *sta,
+				       u32 iv32, u16 *phase1key)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+
+	iwl_update_tkip_key(priv, vif, keyconf, sta, iv32, phase1key);
+}
+
+static int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+			      struct ieee80211_vif *vif,
+			      struct ieee80211_sta *sta,
+			      struct ieee80211_key_conf *key)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
+	struct iwl_rxon_context *ctx = vif_priv->ctx;
+	int ret;
+	bool is_default_wep_key = false;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	if (iwlwifi_mod_params.sw_crypto) {
+		IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n");
+		return -EOPNOTSUPP;
+	}
+
+	switch (key->cipher) {
+	case WLAN_CIPHER_SUITE_TKIP:
+		key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+		/* fall through */
+	case WLAN_CIPHER_SUITE_CCMP:
+		key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+		break;
+	default:
+		break;
+	}
+
+	/*
+	 * We could program these keys into the hardware as well, but we
+	 * don't expect much multicast traffic in IBSS and having keys
+	 * for more stations is probably more useful.
+	 *
+	 * Mark key TX-only and return 0.
+	 */
+	if (vif->type == NL80211_IFTYPE_ADHOC &&
+	    !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
+		key->hw_key_idx = WEP_INVALID_OFFSET;
+		return 0;
+	}
+
+	/* If they key was TX-only, accept deletion */
+	if (cmd == DISABLE_KEY && key->hw_key_idx == WEP_INVALID_OFFSET)
+		return 0;
+
+	mutex_lock(&priv->mutex);
+	iwl_scan_cancel_timeout(priv, 100);
+
+	BUILD_BUG_ON(WEP_INVALID_OFFSET == IWLAGN_HW_KEY_DEFAULT);
+
+	/*
+	 * If we are getting WEP group key and we didn't receive any key mapping
+	 * so far, we are in legacy wep mode (group key only), otherwise we are
+	 * in 1X mode.
+	 * In legacy wep mode, we use another host command to the uCode.
+	 */
+	if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
+	     key->cipher == WLAN_CIPHER_SUITE_WEP104) && !sta) {
+		if (cmd == SET_KEY)
+			is_default_wep_key = !ctx->key_mapping_keys;
+		else
+			is_default_wep_key =
+				key->hw_key_idx == IWLAGN_HW_KEY_DEFAULT;
+	}
+
+
+	switch (cmd) {
+	case SET_KEY:
+		if (is_default_wep_key) {
+			ret = iwl_set_default_wep_key(priv, vif_priv->ctx, key);
+			break;
+		}
+		ret = iwl_set_dynamic_key(priv, vif_priv->ctx, key, sta);
+		if (ret) {
+			/*
+			 * can't add key for RX, but we don't need it
+			 * in the device for TX so still return 0
+			 */
+			ret = 0;
+			key->hw_key_idx = WEP_INVALID_OFFSET;
+		}
+
+		IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n");
+		break;
+	case DISABLE_KEY:
+		if (is_default_wep_key)
+			ret = iwl_remove_default_wep_key(priv, ctx, key);
+		else
+			ret = iwl_remove_dynamic_key(priv, ctx, key, sta);
+
+		IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n");
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&priv->mutex);
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+
+	return ret;
+}
+
+static int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw,
+				   struct ieee80211_vif *vif,
+				   enum ieee80211_ampdu_mlme_action action,
+				   struct ieee80211_sta *sta, u16 tid, u16 *ssn,
+				   u8 buf_size)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	int ret = -EINVAL;
+	struct iwl_station_priv *sta_priv = (void *) sta->drv_priv;
+
+	IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n",
+		     sta->addr, tid);
+
+	if (!(priv->eeprom_data->sku & EEPROM_SKU_CAP_11N_ENABLE))
+		return -EACCES;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+	mutex_lock(&priv->mutex);
+
+	switch (action) {
+	case IEEE80211_AMPDU_RX_START:
+		if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_RXAGG)
+			break;
+		IWL_DEBUG_HT(priv, "start Rx\n");
+		ret = iwl_sta_rx_agg_start(priv, sta, tid, *ssn);
+		break;
+	case IEEE80211_AMPDU_RX_STOP:
+		IWL_DEBUG_HT(priv, "stop Rx\n");
+		ret = iwl_sta_rx_agg_stop(priv, sta, tid);
+		break;
+	case IEEE80211_AMPDU_TX_START:
+		if (!priv->trans->ops->txq_enable)
+			break;
+		if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_TXAGG)
+			break;
+		IWL_DEBUG_HT(priv, "start Tx\n");
+		ret = iwlagn_tx_agg_start(priv, vif, sta, tid, ssn);
+		break;
+	case IEEE80211_AMPDU_TX_STOP:
+		IWL_DEBUG_HT(priv, "stop Tx\n");
+		ret = iwlagn_tx_agg_stop(priv, vif, sta, tid);
+		if ((ret == 0) && (priv->agg_tids_count > 0)) {
+			priv->agg_tids_count--;
+			IWL_DEBUG_HT(priv, "priv->agg_tids_count = %u\n",
+				     priv->agg_tids_count);
+		}
+		if (!priv->agg_tids_count &&
+		    priv->hw_params.use_rts_for_aggregation) {
+			/*
+			 * switch off RTS/CTS if it was previously enabled
+			 */
+			sta_priv->lq_sta.lq.general_params.flags &=
+				~LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK;
+			iwl_send_lq_cmd(priv, iwl_rxon_ctx_from_vif(vif),
+					&sta_priv->lq_sta.lq, CMD_ASYNC, false);
+		}
+		break;
+	case IEEE80211_AMPDU_TX_OPERATIONAL:
+		ret = iwlagn_tx_agg_oper(priv, vif, sta, tid, buf_size);
+		break;
+	}
+	mutex_unlock(&priv->mutex);
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+	return ret;
+}
+
+static int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif,
+			      struct ieee80211_sta *sta)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
+	struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
+	bool is_ap = vif->type == NL80211_IFTYPE_STATION;
+	int ret;
+	u8 sta_id;
+
+	IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n",
+			sta->addr);
+	sta_priv->sta_id = IWL_INVALID_STATION;
+
+	atomic_set(&sta_priv->pending_frames, 0);
+	if (vif->type == NL80211_IFTYPE_AP)
+		sta_priv->client = true;
+
+	ret = iwl_add_station_common(priv, vif_priv->ctx, sta->addr,
+				     is_ap, sta, &sta_id);
+	if (ret) {
+		IWL_ERR(priv, "Unable to add station %pM (%d)\n",
+			sta->addr, ret);
+		/* Should we return success if return code is EEXIST ? */
+		return ret;
+	}
+
+	sta_priv->sta_id = sta_id;
+
+	return 0;
+}
+
+static int iwlagn_mac_sta_remove(struct ieee80211_hw *hw,
+				 struct ieee80211_vif *vif,
+				 struct ieee80211_sta *sta)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
+	int ret;
+
+	IWL_DEBUG_INFO(priv, "proceeding to remove station %pM\n", sta->addr);
+
+	if (vif->type == NL80211_IFTYPE_STATION) {
+		/*
+		 * Station will be removed from device when the RXON
+		 * is set to unassociated -- just deactivate it here
+		 * to avoid re-programming it.
+		 */
+		ret = 0;
+		iwl_deactivate_station(priv, sta_priv->sta_id, sta->addr);
+	} else {
+		ret = iwl_remove_station(priv, sta_priv->sta_id, sta->addr);
+		if (ret)
+			IWL_DEBUG_QUIET_RFKILL(priv,
+				"Error removing station %pM\n", sta->addr);
+	}
+	return ret;
+}
+
+static int iwlagn_mac_sta_state(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif,
+				struct ieee80211_sta *sta,
+				enum ieee80211_sta_state old_state,
+				enum ieee80211_sta_state new_state)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
+	enum {
+		NONE, ADD, REMOVE, HT_RATE_INIT, ADD_RATE_INIT,
+	} op = NONE;
+	int ret;
+
+	IWL_DEBUG_MAC80211(priv, "station %pM state change %d->%d\n",
+			   sta->addr, old_state, new_state);
+
+	mutex_lock(&priv->mutex);
+	if (vif->type == NL80211_IFTYPE_STATION) {
+		if (old_state == IEEE80211_STA_NOTEXIST &&
+		    new_state == IEEE80211_STA_NONE)
+			op = ADD;
+		else if (old_state == IEEE80211_STA_NONE &&
+			 new_state == IEEE80211_STA_NOTEXIST)
+			op = REMOVE;
+		else if (old_state == IEEE80211_STA_AUTH &&
+			 new_state == IEEE80211_STA_ASSOC)
+			op = HT_RATE_INIT;
+	} else {
+		if (old_state == IEEE80211_STA_AUTH &&
+		    new_state == IEEE80211_STA_ASSOC)
+			op = ADD_RATE_INIT;
+		else if (old_state == IEEE80211_STA_ASSOC &&
+			 new_state == IEEE80211_STA_AUTH)
+			op = REMOVE;
+	}
+
+	switch (op) {
+	case ADD:
+		ret = iwlagn_mac_sta_add(hw, vif, sta);
+		break;
+	case REMOVE:
+		ret = iwlagn_mac_sta_remove(hw, vif, sta);
+		break;
+	case ADD_RATE_INIT:
+		ret = iwlagn_mac_sta_add(hw, vif, sta);
+		if (ret)
+			break;
+		/* Initialize rate scaling */
+		IWL_DEBUG_INFO(priv,
+			       "Initializing rate scaling for station %pM\n",
+			       sta->addr);
+		iwl_rs_rate_init(priv, sta, iwl_sta_id(sta));
+		ret = 0;
+		break;
+	case HT_RATE_INIT:
+		/* Initialize rate scaling */
+		ret = iwl_sta_update_ht(priv, vif_priv->ctx, sta);
+		if (ret)
+			break;
+		IWL_DEBUG_INFO(priv,
+			       "Initializing rate scaling for station %pM\n",
+			       sta->addr);
+		iwl_rs_rate_init(priv, sta, iwl_sta_id(sta));
+		ret = 0;
+		break;
+	default:
+		ret = 0;
+		break;
+	}
+
+	/*
+	 * mac80211 might WARN if we fail, but due the way we
+	 * (badly) handle hard rfkill, we might fail here
+	 */
+	if (iwl_is_rfkill(priv))
+		ret = 0;
+
+	mutex_unlock(&priv->mutex);
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+
+	return ret;
+}
+
+static void iwlagn_mac_channel_switch(struct ieee80211_hw *hw,
+				      struct ieee80211_channel_switch *ch_switch)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	struct ieee80211_conf *conf = &hw->conf;
+	struct ieee80211_channel *channel = ch_switch->channel;
+	struct iwl_ht_config *ht_conf = &priv->current_ht_config;
+	/*
+	 * MULTI-FIXME
+	 * When we add support for multiple interfaces, we need to
+	 * revisit this. The channel switch command in the device
+	 * only affects the BSS context, but what does that really
+	 * mean? And what if we get a CSA on the second interface?
+	 * This needs a lot of work.
+	 */
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	u16 ch;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	mutex_lock(&priv->mutex);
+
+	if (iwl_is_rfkill(priv))
+		goto out;
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
+	    test_bit(STATUS_SCANNING, &priv->status) ||
+	    test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
+		goto out;
+
+	if (!iwl_is_associated_ctx(ctx))
+		goto out;
+
+	if (!priv->lib->set_channel_switch)
+		goto out;
+
+	ch = channel->hw_value;
+	if (le16_to_cpu(ctx->active.channel) == ch)
+		goto out;
+
+	priv->current_ht_config.smps = conf->smps_mode;
+
+	/* Configure HT40 channels */
+	ctx->ht.enabled = conf_is_ht(conf);
+	if (ctx->ht.enabled)
+		iwlagn_config_ht40(conf, ctx);
+	else
+		ctx->ht.is_40mhz = false;
+
+	if ((le16_to_cpu(ctx->staging.channel) != ch))
+		ctx->staging.flags = 0;
+
+	iwl_set_rxon_channel(priv, channel, ctx);
+	iwl_set_rxon_ht(priv, ht_conf);
+	iwl_set_flags_for_band(priv, ctx, channel->band, ctx->vif);
+
+	/*
+	 * at this point, staging_rxon has the
+	 * configuration for channel switch
+	 */
+	set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status);
+	priv->switch_channel = cpu_to_le16(ch);
+	if (priv->lib->set_channel_switch(priv, ch_switch)) {
+		clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status);
+		priv->switch_channel = 0;
+		ieee80211_chswitch_done(ctx->vif, false);
+	}
+
+out:
+	mutex_unlock(&priv->mutex);
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+}
+
+void iwl_chswitch_done(struct iwl_priv *priv, bool is_success)
+{
+	/*
+	 * MULTI-FIXME
+	 * See iwlagn_mac_channel_switch.
+	 */
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
+		ieee80211_chswitch_done(ctx->vif, is_success);
+}
+
+static void iwlagn_configure_filter(struct ieee80211_hw *hw,
+				    unsigned int changed_flags,
+				    unsigned int *total_flags,
+				    u64 multicast)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	__le32 filter_or = 0, filter_nand = 0;
+	struct iwl_rxon_context *ctx;
+
+#define CHK(test, flag)	do { \
+	if (*total_flags & (test))		\
+		filter_or |= (flag);		\
+	else					\
+		filter_nand |= (flag);		\
+	} while (0)
+
+	IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n",
+			changed_flags, *total_flags);
+
+	CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK);
+	/* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */
+	CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK);
+	CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
+
+#undef CHK
+
+	mutex_lock(&priv->mutex);
+
+	for_each_context(priv, ctx) {
+		ctx->staging.filter_flags &= ~filter_nand;
+		ctx->staging.filter_flags |= filter_or;
+
+		/*
+		 * Not committing directly because hardware can perform a scan,
+		 * but we'll eventually commit the filter flags change anyway.
+		 */
+	}
+
+	mutex_unlock(&priv->mutex);
+
+	/*
+	 * Receiving all multicast frames is always enabled by the
+	 * default flags setup in iwl_connection_init_rx_config()
+	 * since we currently do not support programming multicast
+	 * filters into the device.
+	 */
+	*total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
+			FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
+}
+
+static void iwlagn_mac_flush(struct ieee80211_hw *hw, bool drop)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+
+	mutex_lock(&priv->mutex);
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
+		IWL_DEBUG_TX(priv, "Aborting flush due to device shutdown\n");
+		goto done;
+	}
+	if (iwl_is_rfkill(priv)) {
+		IWL_DEBUG_TX(priv, "Aborting flush due to RF Kill\n");
+		goto done;
+	}
+
+	/*
+	 * mac80211 will not push any more frames for transmit
+	 * until the flush is completed
+	 */
+	if (drop) {
+		IWL_DEBUG_MAC80211(priv, "send flush command\n");
+		if (iwlagn_txfifo_flush(priv, IWL_DROP_ALL)) {
+			IWL_ERR(priv, "flush request fail\n");
+			goto done;
+		}
+	}
+	IWL_DEBUG_MAC80211(priv, "wait transmit/flush all frames\n");
+	iwl_trans_wait_tx_queue_empty(priv->trans);
+done:
+	mutex_unlock(&priv->mutex);
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+}
+
+static int iwlagn_mac_remain_on_channel(struct ieee80211_hw *hw,
+				     struct ieee80211_channel *channel,
+				     enum nl80211_channel_type channel_type,
+				     int duration)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_PAN];
+	int err = 0;
+
+	if (!(priv->valid_contexts & BIT(IWL_RXON_CTX_PAN)))
+		return -EOPNOTSUPP;
+
+	if (!(ctx->interface_modes & BIT(NL80211_IFTYPE_P2P_CLIENT)))
+		return -EOPNOTSUPP;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+	mutex_lock(&priv->mutex);
+
+	if (test_bit(STATUS_SCAN_HW, &priv->status)) {
+		/* mac80211 should not scan while ROC or ROC while scanning */
+		if (WARN_ON_ONCE(priv->scan_type != IWL_SCAN_RADIO_RESET)) {
+			err = -EBUSY;
+			goto out;
+		}
+
+		iwl_scan_cancel_timeout(priv, 100);
+
+		if (test_bit(STATUS_SCAN_HW, &priv->status)) {
+			err = -EBUSY;
+			goto out;
+		}
+	}
+
+	priv->hw_roc_channel = channel;
+	priv->hw_roc_chantype = channel_type;
+	/* convert from ms to TU */
+	priv->hw_roc_duration = DIV_ROUND_UP(1000 * duration, 1024);
+	priv->hw_roc_start_notified = false;
+	cancel_delayed_work(&priv->hw_roc_disable_work);
+
+	if (!ctx->is_active) {
+		static const struct iwl_qos_info default_qos_data = {
+			.def_qos_parm = {
+				.ac[0] = {
+					.cw_min = cpu_to_le16(3),
+					.cw_max = cpu_to_le16(7),
+					.aifsn = 2,
+					.edca_txop = cpu_to_le16(1504),
+				},
+				.ac[1] = {
+					.cw_min = cpu_to_le16(7),
+					.cw_max = cpu_to_le16(15),
+					.aifsn = 2,
+					.edca_txop = cpu_to_le16(3008),
+				},
+				.ac[2] = {
+					.cw_min = cpu_to_le16(15),
+					.cw_max = cpu_to_le16(1023),
+					.aifsn = 3,
+				},
+				.ac[3] = {
+					.cw_min = cpu_to_le16(15),
+					.cw_max = cpu_to_le16(1023),
+					.aifsn = 7,
+				},
+			},
+		};
+
+		ctx->is_active = true;
+		ctx->qos_data = default_qos_data;
+		ctx->staging.dev_type = RXON_DEV_TYPE_P2P;
+		memcpy(ctx->staging.node_addr,
+		       priv->contexts[IWL_RXON_CTX_BSS].staging.node_addr,
+		       ETH_ALEN);
+		memcpy(ctx->staging.bssid_addr,
+		       priv->contexts[IWL_RXON_CTX_BSS].staging.node_addr,
+		       ETH_ALEN);
+		err = iwlagn_commit_rxon(priv, ctx);
+		if (err)
+			goto out;
+		ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK |
+					     RXON_FILTER_PROMISC_MSK |
+					     RXON_FILTER_CTL2HOST_MSK;
+
+		err = iwlagn_commit_rxon(priv, ctx);
+		if (err) {
+			iwlagn_disable_roc(priv);
+			goto out;
+		}
+		priv->hw_roc_setup = true;
+	}
+
+	err = iwl_scan_initiate(priv, ctx->vif, IWL_SCAN_ROC, channel->band);
+	if (err)
+		iwlagn_disable_roc(priv);
+
+ out:
+	mutex_unlock(&priv->mutex);
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+
+	return err;
+}
+
+static int iwlagn_mac_cancel_remain_on_channel(struct ieee80211_hw *hw)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+
+	if (!(priv->valid_contexts & BIT(IWL_RXON_CTX_PAN)))
+		return -EOPNOTSUPP;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+	mutex_lock(&priv->mutex);
+	iwl_scan_cancel_timeout(priv, priv->hw_roc_duration);
+	iwlagn_disable_roc(priv);
+	mutex_unlock(&priv->mutex);
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+
+	return 0;
+}
+
+static void iwlagn_mac_rssi_callback(struct ieee80211_hw *hw,
+				     enum ieee80211_rssi_event rssi_event)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+	mutex_lock(&priv->mutex);
+
+	if (priv->cfg->bt_params &&
+			priv->cfg->bt_params->advanced_bt_coexist) {
+		if (rssi_event == RSSI_EVENT_LOW)
+			priv->bt_enable_pspoll = true;
+		else if (rssi_event == RSSI_EVENT_HIGH)
+			priv->bt_enable_pspoll = false;
+
+		iwlagn_send_advance_bt_config(priv);
+	} else {
+		IWL_DEBUG_MAC80211(priv, "Advanced BT coex disabled,"
+				"ignoring RSSI callback\n");
+	}
+
+	mutex_unlock(&priv->mutex);
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+}
+
+static int iwlagn_mac_set_tim(struct ieee80211_hw *hw,
+			      struct ieee80211_sta *sta, bool set)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+
+	queue_work(priv->workqueue, &priv->beacon_update);
+
+	return 0;
+}
+
+static int iwlagn_mac_conf_tx(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif, u16 queue,
+			      const struct ieee80211_tx_queue_params *params)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
+	struct iwl_rxon_context *ctx = vif_priv->ctx;
+	int q;
+
+	if (WARN_ON(!ctx))
+		return -EINVAL;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	if (!iwl_is_ready_rf(priv)) {
+		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
+		return -EIO;
+	}
+
+	if (queue >= AC_NUM) {
+		IWL_DEBUG_MAC80211(priv, "leave - queue >= AC_NUM %d\n", queue);
+		return 0;
+	}
+
+	q = AC_NUM - 1 - queue;
+
+	mutex_lock(&priv->mutex);
+
+	ctx->qos_data.def_qos_parm.ac[q].cw_min =
+		cpu_to_le16(params->cw_min);
+	ctx->qos_data.def_qos_parm.ac[q].cw_max =
+		cpu_to_le16(params->cw_max);
+	ctx->qos_data.def_qos_parm.ac[q].aifsn = params->aifs;
+	ctx->qos_data.def_qos_parm.ac[q].edca_txop =
+			cpu_to_le16((params->txop * 32));
+
+	ctx->qos_data.def_qos_parm.ac[q].reserved1 = 0;
+
+	mutex_unlock(&priv->mutex);
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+	return 0;
+}
+
+static int iwlagn_mac_tx_last_beacon(struct ieee80211_hw *hw)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+
+	return priv->ibss_manager == IWL_IBSS_MANAGER;
+}
+
+static int iwl_set_mode(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
+{
+	iwl_connection_init_rx_config(priv, ctx);
+
+	iwlagn_set_rxon_chain(priv, ctx);
+
+	return iwlagn_commit_rxon(priv, ctx);
+}
+
+static int iwl_setup_interface(struct iwl_priv *priv,
+			       struct iwl_rxon_context *ctx)
+{
+	struct ieee80211_vif *vif = ctx->vif;
+	int err, ac;
+
+	lockdep_assert_held(&priv->mutex);
+
+	/*
+	 * This variable will be correct only when there's just
+	 * a single context, but all code using it is for hardware
+	 * that supports only one context.
+	 */
+	priv->iw_mode = vif->type;
+
+	ctx->is_active = true;
+
+	err = iwl_set_mode(priv, ctx);
+	if (err) {
+		if (!ctx->always_active)
+			ctx->is_active = false;
+		return err;
+	}
+
+	if (priv->cfg->bt_params && priv->cfg->bt_params->advanced_bt_coexist &&
+	    vif->type == NL80211_IFTYPE_ADHOC) {
+		/*
+		 * pretend to have high BT traffic as long as we
+		 * are operating in IBSS mode, as this will cause
+		 * the rate scaling etc. to behave as intended.
+		 */
+		priv->bt_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_HIGH;
+	}
+
+	/* set up queue mappings */
+	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
+		vif->hw_queue[ac] = ctx->ac_to_queue[ac];
+
+	if (vif->type == NL80211_IFTYPE_AP)
+		vif->cab_queue = ctx->mcast_queue;
+	else
+		vif->cab_queue = IEEE80211_INVAL_HW_QUEUE;
+
+	return 0;
+}
+
+static int iwlagn_mac_add_interface(struct ieee80211_hw *hw,
+				    struct ieee80211_vif *vif)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
+	struct iwl_rxon_context *tmp, *ctx = NULL;
+	int err;
+	enum nl80211_iftype viftype = ieee80211_vif_type_p2p(vif);
+	bool reset = false;
+
+	IWL_DEBUG_MAC80211(priv, "enter: type %d, addr %pM\n",
+			   viftype, vif->addr);
+
+	cancel_delayed_work_sync(&priv->hw_roc_disable_work);
+
+	mutex_lock(&priv->mutex);
+
+	iwlagn_disable_roc(priv);
+
+	if (!iwl_is_ready_rf(priv)) {
+		IWL_WARN(priv, "Try to add interface when device not ready\n");
+		err = -EINVAL;
+		goto out;
+	}
+
+	for_each_context(priv, tmp) {
+		u32 possible_modes =
+			tmp->interface_modes | tmp->exclusive_interface_modes;
+
+		if (tmp->vif) {
+			/* On reset we need to add the same interface again */
+			if (tmp->vif == vif) {
+				reset = true;
+				ctx = tmp;
+				break;
+			}
+
+			/* check if this busy context is exclusive */
+			if (tmp->exclusive_interface_modes &
+						BIT(tmp->vif->type)) {
+				err = -EINVAL;
+				goto out;
+			}
+			continue;
+		}
+
+		if (!(possible_modes & BIT(viftype)))
+			continue;
+
+		/* have maybe usable context w/o interface */
+		ctx = tmp;
+		break;
+	}
+
+	if (!ctx) {
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
+	vif_priv->ctx = ctx;
+	ctx->vif = vif;
+
+	err = iwl_setup_interface(priv, ctx);
+	if (!err || reset)
+		goto out;
+
+	ctx->vif = NULL;
+	priv->iw_mode = NL80211_IFTYPE_STATION;
+ out:
+	mutex_unlock(&priv->mutex);
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+	return err;
+}
+
+static void iwl_teardown_interface(struct iwl_priv *priv,
+				   struct ieee80211_vif *vif,
+				   bool mode_change)
+{
+	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
+
+	lockdep_assert_held(&priv->mutex);
+
+	if (priv->scan_vif == vif) {
+		iwl_scan_cancel_timeout(priv, 200);
+		iwl_force_scan_end(priv);
+	}
+
+	if (!mode_change) {
+		iwl_set_mode(priv, ctx);
+		if (!ctx->always_active)
+			ctx->is_active = false;
+	}
+
+	/*
+	 * When removing the IBSS interface, overwrite the
+	 * BT traffic load with the stored one from the last
+	 * notification, if any. If this is a device that
+	 * doesn't implement this, this has no effect since
+	 * both values are the same and zero.
+	 */
+	if (vif->type == NL80211_IFTYPE_ADHOC)
+		priv->bt_traffic_load = priv->last_bt_traffic_load;
+}
+
+static void iwlagn_mac_remove_interface(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	mutex_lock(&priv->mutex);
+
+	if (WARN_ON(ctx->vif != vif)) {
+		struct iwl_rxon_context *tmp;
+		IWL_ERR(priv, "ctx->vif = %p, vif = %p\n", ctx->vif, vif);
+		for_each_context(priv, tmp)
+			IWL_ERR(priv, "\tID = %d:\tctx = %p\tctx->vif = %p\n",
+				tmp->ctxid, tmp, tmp->vif);
+	}
+	ctx->vif = NULL;
+
+	iwl_teardown_interface(priv, vif, false);
+
+	mutex_unlock(&priv->mutex);
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+
+}
+
+static int iwlagn_mac_change_interface(struct ieee80211_hw *hw,
+				       struct ieee80211_vif *vif,
+				       enum nl80211_iftype newtype, bool newp2p)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	struct iwl_rxon_context *ctx, *tmp;
+	enum nl80211_iftype newviftype = newtype;
+	u32 interface_modes;
+	int err;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	newtype = ieee80211_iftype_p2p(newtype, newp2p);
+
+	mutex_lock(&priv->mutex);
+
+	ctx = iwl_rxon_ctx_from_vif(vif);
+
+	/*
+	 * To simplify this code, only support changes on the
+	 * BSS context. The PAN context is usually reassigned
+	 * by creating/removing P2P interfaces anyway.
+	 */
+	if (ctx->ctxid != IWL_RXON_CTX_BSS) {
+		err = -EBUSY;
+		goto out;
+	}
+
+	if (!ctx->vif || !iwl_is_ready_rf(priv)) {
+		/*
+		 * Huh? But wait ... this can maybe happen when
+		 * we're in the middle of a firmware restart!
+		 */
+		err = -EBUSY;
+		goto out;
+	}
+
+	/* Check if the switch is supported in the same context */
+	interface_modes = ctx->interface_modes | ctx->exclusive_interface_modes;
+	if (!(interface_modes & BIT(newtype))) {
+		err = -EBUSY;
+		goto out;
+	}
+
+	if (ctx->exclusive_interface_modes & BIT(newtype)) {
+		for_each_context(priv, tmp) {
+			if (ctx == tmp)
+				continue;
+
+			if (!tmp->is_active)
+				continue;
+
+			/*
+			 * The current mode switch would be exclusive, but
+			 * another context is active ... refuse the switch.
+			 */
+			err = -EBUSY;
+			goto out;
+		}
+	}
+
+	/* success */
+	iwl_teardown_interface(priv, vif, true);
+	vif->type = newviftype;
+	vif->p2p = newp2p;
+	err = iwl_setup_interface(priv, ctx);
+	WARN_ON(err);
+	/*
+	 * We've switched internally, but submitting to the
+	 * device may have failed for some reason. Mask this
+	 * error, because otherwise mac80211 will not switch
+	 * (and set the interface type back) and we'll be
+	 * out of sync with it.
+	 */
+	err = 0;
+
+ out:
+	mutex_unlock(&priv->mutex);
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+
+	return err;
+}
+
+static int iwlagn_mac_hw_scan(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif,
+			      struct cfg80211_scan_request *req)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	int ret;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	if (req->n_channels == 0)
+		return -EINVAL;
+
+	mutex_lock(&priv->mutex);
+
+	/*
+	 * If an internal scan is in progress, just set
+	 * up the scan_request as per above.
+	 */
+	if (priv->scan_type != IWL_SCAN_NORMAL) {
+		IWL_DEBUG_SCAN(priv,
+			       "SCAN request during internal scan - defer\n");
+		priv->scan_request = req;
+		priv->scan_vif = vif;
+		ret = 0;
+	} else {
+		priv->scan_request = req;
+		priv->scan_vif = vif;
+		/*
+		 * mac80211 will only ask for one band at a time
+		 * so using channels[0] here is ok
+		 */
+		ret = iwl_scan_initiate(priv, vif, IWL_SCAN_NORMAL,
+					req->channels[0]->band);
+		if (ret) {
+			priv->scan_request = NULL;
+			priv->scan_vif = NULL;
+		}
+	}
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+
+	mutex_unlock(&priv->mutex);
+
+	return ret;
+}
+
+static void iwl_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id)
+{
+	struct iwl_addsta_cmd cmd = {
+		.mode = STA_CONTROL_MODIFY_MSK,
+		.station_flags_msk = STA_FLG_PWR_SAVE_MSK,
+		.sta.sta_id = sta_id,
+	};
+
+	iwl_send_add_sta(priv, &cmd, CMD_ASYNC);
+}
+
+static void iwlagn_mac_sta_notify(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif,
+				  enum sta_notify_cmd cmd,
+				  struct ieee80211_sta *sta)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
+	int sta_id;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	switch (cmd) {
+	case STA_NOTIFY_SLEEP:
+		WARN_ON(!sta_priv->client);
+		sta_priv->asleep = true;
+		if (atomic_read(&sta_priv->pending_frames) > 0)
+			ieee80211_sta_block_awake(hw, sta, true);
+		break;
+	case STA_NOTIFY_AWAKE:
+		WARN_ON(!sta_priv->client);
+		if (!sta_priv->asleep)
+			break;
+		sta_priv->asleep = false;
+		sta_id = iwl_sta_id(sta);
+		if (sta_id != IWL_INVALID_STATION)
+			iwl_sta_modify_ps_wake(priv, sta_id);
+		break;
+	default:
+		break;
+	}
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+}
+
+struct ieee80211_ops iwlagn_hw_ops = {
+	.tx = iwlagn_mac_tx,
+	.start = iwlagn_mac_start,
+	.stop = iwlagn_mac_stop,
+#ifdef CONFIG_PM_SLEEP
+	.suspend = iwlagn_mac_suspend,
+	.resume = iwlagn_mac_resume,
+	.set_wakeup = iwlagn_mac_set_wakeup,
+#endif
+	.add_interface = iwlagn_mac_add_interface,
+	.remove_interface = iwlagn_mac_remove_interface,
+	.change_interface = iwlagn_mac_change_interface,
+	.config = iwlagn_mac_config,
+	.configure_filter = iwlagn_configure_filter,
+	.set_key = iwlagn_mac_set_key,
+	.update_tkip_key = iwlagn_mac_update_tkip_key,
+	.set_rekey_data = iwlagn_mac_set_rekey_data,
+	.conf_tx = iwlagn_mac_conf_tx,
+	.bss_info_changed = iwlagn_bss_info_changed,
+	.ampdu_action = iwlagn_mac_ampdu_action,
+	.hw_scan = iwlagn_mac_hw_scan,
+	.sta_notify = iwlagn_mac_sta_notify,
+	.sta_state = iwlagn_mac_sta_state,
+	.channel_switch = iwlagn_mac_channel_switch,
+	.flush = iwlagn_mac_flush,
+	.tx_last_beacon = iwlagn_mac_tx_last_beacon,
+	.remain_on_channel = iwlagn_mac_remain_on_channel,
+	.cancel_remain_on_channel = iwlagn_mac_cancel_remain_on_channel,
+	.rssi_callback = iwlagn_mac_rssi_callback,
+	CFG80211_TESTMODE_CMD(iwlagn_mac_testmode_cmd)
+	CFG80211_TESTMODE_DUMP(iwlagn_mac_testmode_dump)
+	.set_tim = iwlagn_mac_set_tim,
+};
+
+/* This function both allocates and initializes hw and priv. */
+struct ieee80211_hw *iwl_alloc_all(void)
+{
+	struct iwl_priv *priv;
+	struct iwl_op_mode *op_mode;
+	/* mac80211 allocates memory for this device instance, including
+	 *   space for this driver's private structure */
+	struct ieee80211_hw *hw;
+
+	hw = ieee80211_alloc_hw(sizeof(struct iwl_priv) +
+				sizeof(struct iwl_op_mode), &iwlagn_hw_ops);
+	if (!hw)
+		goto out;
+
+	op_mode = hw->priv;
+	priv = IWL_OP_MODE_GET_DVM(op_mode);
+	priv->hw = hw;
+
+out:
+	return hw;
+}
diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c
new file mode 100644
index 00000000000..abfd7916bde
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/main.c
@@ -0,0 +1,2226 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are derived from the ipw3945 project, as well
+ * as portions of the ieee80211 subsystem header files.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/if_arp.h>
+
+#include <net/mac80211.h>
+
+#include <asm/div64.h>
+
+#include "iwl-eeprom-read.h"
+#include "iwl-eeprom-parse.h"
+#include "iwl-io.h"
+#include "iwl-trans.h"
+#include "iwl-op-mode.h"
+#include "iwl-drv.h"
+#include "iwl-modparams.h"
+#include "iwl-prph.h"
+
+#include "dev.h"
+#include "calib.h"
+#include "agn.h"
+
+
+/******************************************************************************
+ *
+ * module boiler plate
+ *
+ ******************************************************************************/
+
+/*
+ * module name, copyright, version, etc.
+ */
+#define DRV_DESCRIPTION	"Intel(R) Wireless WiFi Link AGN driver for Linux"
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+#define VD "d"
+#else
+#define VD
+#endif
+
+#define DRV_VERSION     IWLWIFI_VERSION VD
+
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
+MODULE_LICENSE("GPL");
+
+static const struct iwl_op_mode_ops iwl_dvm_ops;
+
+void iwl_update_chain_flags(struct iwl_priv *priv)
+{
+	struct iwl_rxon_context *ctx;
+
+	for_each_context(priv, ctx) {
+		iwlagn_set_rxon_chain(priv, ctx);
+		if (ctx->active.rx_chain != ctx->staging.rx_chain)
+			iwlagn_commit_rxon(priv, ctx);
+	}
+}
+
+/* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
+static void iwl_set_beacon_tim(struct iwl_priv *priv,
+			       struct iwl_tx_beacon_cmd *tx_beacon_cmd,
+			       u8 *beacon, u32 frame_size)
+{
+	u16 tim_idx;
+	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon;
+
+	/*
+	 * The index is relative to frame start but we start looking at the
+	 * variable-length part of the beacon.
+	 */
+	tim_idx = mgmt->u.beacon.variable - beacon;
+
+	/* Parse variable-length elements of beacon to find WLAN_EID_TIM */
+	while ((tim_idx < (frame_size - 2)) &&
+			(beacon[tim_idx] != WLAN_EID_TIM))
+		tim_idx += beacon[tim_idx+1] + 2;
+
+	/* If TIM field was found, set variables */
+	if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) {
+		tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx);
+		tx_beacon_cmd->tim_size = beacon[tim_idx+1];
+	} else
+		IWL_WARN(priv, "Unable to find TIM Element in beacon\n");
+}
+
+int iwlagn_send_beacon_cmd(struct iwl_priv *priv)
+{
+	struct iwl_tx_beacon_cmd *tx_beacon_cmd;
+	struct iwl_host_cmd cmd = {
+		.id = REPLY_TX_BEACON,
+		.flags = CMD_SYNC,
+	};
+	struct ieee80211_tx_info *info;
+	u32 frame_size;
+	u32 rate_flags;
+	u32 rate;
+
+	/*
+	 * We have to set up the TX command, the TX Beacon command, and the
+	 * beacon contents.
+	 */
+
+	lockdep_assert_held(&priv->mutex);
+
+	if (!priv->beacon_ctx) {
+		IWL_ERR(priv, "trying to build beacon w/o beacon context!\n");
+		return 0;
+	}
+
+	if (WARN_ON(!priv->beacon_skb))
+		return -EINVAL;
+
+	/* Allocate beacon command */
+	if (!priv->beacon_cmd)
+		priv->beacon_cmd = kzalloc(sizeof(*tx_beacon_cmd), GFP_KERNEL);
+	tx_beacon_cmd = priv->beacon_cmd;
+	if (!tx_beacon_cmd)
+		return -ENOMEM;
+
+	frame_size = priv->beacon_skb->len;
+
+	/* Set up TX command fields */
+	tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
+	tx_beacon_cmd->tx.sta_id = priv->beacon_ctx->bcast_sta_id;
+	tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+	tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK |
+		TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK;
+
+	/* Set up TX beacon command fields */
+	iwl_set_beacon_tim(priv, tx_beacon_cmd, priv->beacon_skb->data,
+			   frame_size);
+
+	/* Set up packet rate and flags */
+	info = IEEE80211_SKB_CB(priv->beacon_skb);
+
+	/*
+	 * Let's set up the rate at least somewhat correctly;
+	 * it will currently not actually be used by the uCode,
+	 * it uses the broadcast station's rate instead.
+	 */
+	if (info->control.rates[0].idx < 0 ||
+	    info->control.rates[0].flags & IEEE80211_TX_RC_MCS)
+		rate = 0;
+	else
+		rate = info->control.rates[0].idx;
+
+	priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant,
+					      priv->eeprom_data->valid_tx_ant);
+	rate_flags = iwl_ant_idx_to_flags(priv->mgmt_tx_ant);
+
+	/* In mac80211, rates for 5 GHz start at 0 */
+	if (info->band == IEEE80211_BAND_5GHZ)
+		rate += IWL_FIRST_OFDM_RATE;
+	else if (rate >= IWL_FIRST_CCK_RATE && rate <= IWL_LAST_CCK_RATE)
+		rate_flags |= RATE_MCS_CCK_MSK;
+
+	tx_beacon_cmd->tx.rate_n_flags =
+			iwl_hw_set_rate_n_flags(rate, rate_flags);
+
+	/* Submit command */
+	cmd.len[0] = sizeof(*tx_beacon_cmd);
+	cmd.data[0] = tx_beacon_cmd;
+	cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY;
+	cmd.len[1] = frame_size;
+	cmd.data[1] = priv->beacon_skb->data;
+	cmd.dataflags[1] = IWL_HCMD_DFL_NOCOPY;
+
+	return iwl_dvm_send_cmd(priv, &cmd);
+}
+
+static void iwl_bg_beacon_update(struct work_struct *work)
+{
+	struct iwl_priv *priv =
+		container_of(work, struct iwl_priv, beacon_update);
+	struct sk_buff *beacon;
+
+	mutex_lock(&priv->mutex);
+	if (!priv->beacon_ctx) {
+		IWL_ERR(priv, "updating beacon w/o beacon context!\n");
+		goto out;
+	}
+
+	if (priv->beacon_ctx->vif->type != NL80211_IFTYPE_AP) {
+		/*
+		 * The ucode will send beacon notifications even in
+		 * IBSS mode, but we don't want to process them. But
+		 * we need to defer the type check to here due to
+		 * requiring locking around the beacon_ctx access.
+		 */
+		goto out;
+	}
+
+	/* Pull updated AP beacon from mac80211. will fail if not in AP mode */
+	beacon = ieee80211_beacon_get(priv->hw, priv->beacon_ctx->vif);
+	if (!beacon) {
+		IWL_ERR(priv, "update beacon failed -- keeping old\n");
+		goto out;
+	}
+
+	/* new beacon skb is allocated every time; dispose previous.*/
+	dev_kfree_skb(priv->beacon_skb);
+
+	priv->beacon_skb = beacon;
+
+	iwlagn_send_beacon_cmd(priv);
+ out:
+	mutex_unlock(&priv->mutex);
+}
+
+static void iwl_bg_bt_runtime_config(struct work_struct *work)
+{
+	struct iwl_priv *priv =
+		container_of(work, struct iwl_priv, bt_runtime_config);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	/* dont send host command if rf-kill is on */
+	if (!iwl_is_ready_rf(priv))
+		return;
+	iwlagn_send_advance_bt_config(priv);
+}
+
+static void iwl_bg_bt_full_concurrency(struct work_struct *work)
+{
+	struct iwl_priv *priv =
+		container_of(work, struct iwl_priv, bt_full_concurrency);
+	struct iwl_rxon_context *ctx;
+
+	mutex_lock(&priv->mutex);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		goto out;
+
+	/* dont send host command if rf-kill is on */
+	if (!iwl_is_ready_rf(priv))
+		goto out;
+
+	IWL_DEBUG_INFO(priv, "BT coex in %s mode\n",
+		       priv->bt_full_concurrent ?
+		       "full concurrency" : "3-wire");
+
+	/*
+	 * LQ & RXON updated cmds must be sent before BT Config cmd
+	 * to avoid 3-wire collisions
+	 */
+	for_each_context(priv, ctx) {
+		iwlagn_set_rxon_chain(priv, ctx);
+		iwlagn_commit_rxon(priv, ctx);
+	}
+
+	iwlagn_send_advance_bt_config(priv);
+out:
+	mutex_unlock(&priv->mutex);
+}
+
+int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags, bool clear)
+{
+	struct iwl_statistics_cmd statistics_cmd = {
+		.configuration_flags =
+			clear ? IWL_STATS_CONF_CLEAR_STATS : 0,
+	};
+
+	if (flags & CMD_ASYNC)
+		return iwl_dvm_send_cmd_pdu(priv, REPLY_STATISTICS_CMD,
+					CMD_ASYNC,
+					sizeof(struct iwl_statistics_cmd),
+					&statistics_cmd);
+	else
+		return iwl_dvm_send_cmd_pdu(priv, REPLY_STATISTICS_CMD,
+					CMD_SYNC,
+					sizeof(struct iwl_statistics_cmd),
+					&statistics_cmd);
+}
+
+/**
+ * iwl_bg_statistics_periodic - Timer callback to queue statistics
+ *
+ * This callback is provided in order to send a statistics request.
+ *
+ * This timer function is continually reset to execute within
+ * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
+ * was received.  We need to ensure we receive the statistics in order
+ * to update the temperature used for calibrating the TXPOWER.
+ */
+static void iwl_bg_statistics_periodic(unsigned long data)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)data;
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	/* dont send host command if rf-kill is on */
+	if (!iwl_is_ready_rf(priv))
+		return;
+
+	iwl_send_statistics_request(priv, CMD_ASYNC, false);
+}
+
+
+static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base,
+					u32 start_idx, u32 num_events,
+					u32 capacity, u32 mode)
+{
+	u32 i;
+	u32 ptr;        /* SRAM byte address of log data */
+	u32 ev, time, data; /* event log data */
+	unsigned long reg_flags;
+
+	if (mode == 0)
+		ptr = base + (4 * sizeof(u32)) + (start_idx * 2 * sizeof(u32));
+	else
+		ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32));
+
+	/* Make sure device is powered up for SRAM reads */
+	spin_lock_irqsave(&priv->trans->reg_lock, reg_flags);
+	if (unlikely(!iwl_grab_nic_access(priv->trans))) {
+		spin_unlock_irqrestore(&priv->trans->reg_lock, reg_flags);
+		return;
+	}
+
+	/* Set starting address; reads will auto-increment */
+	iwl_write32(priv->trans, HBUS_TARG_MEM_RADDR, ptr);
+
+	/*
+	 * Refuse to read more than would have fit into the log from
+	 * the current start_idx. This used to happen due to the race
+	 * described below, but now WARN because the code below should
+	 * prevent it from happening here.
+	 */
+	if (WARN_ON(num_events > capacity - start_idx))
+		num_events = capacity - start_idx;
+
+	/*
+	 * "time" is actually "data" for mode 0 (no timestamp).
+	 * place event id # at far right for easier visual parsing.
+	 */
+	for (i = 0; i < num_events; i++) {
+		ev = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT);
+		time = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT);
+		if (mode == 0) {
+			trace_iwlwifi_dev_ucode_cont_event(
+					priv->trans->dev, 0, time, ev);
+		} else {
+			data = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT);
+			trace_iwlwifi_dev_ucode_cont_event(
+					priv->trans->dev, time, data, ev);
+		}
+	}
+	/* Allow device to power down */
+	iwl_release_nic_access(priv->trans);
+	spin_unlock_irqrestore(&priv->trans->reg_lock, reg_flags);
+}
+
+static void iwl_continuous_event_trace(struct iwl_priv *priv)
+{
+	u32 capacity;   /* event log capacity in # entries */
+	struct {
+		u32 capacity;
+		u32 mode;
+		u32 wrap_counter;
+		u32 write_counter;
+	} __packed read;
+	u32 base;       /* SRAM byte address of event log header */
+	u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
+	u32 num_wraps;  /* # times uCode wrapped to top of log */
+	u32 next_entry; /* index of next entry to be written by uCode */
+
+	base = priv->device_pointers.log_event_table;
+	if (iwlagn_hw_valid_rtc_data_addr(base)) {
+		iwl_read_targ_mem_bytes(priv->trans, base, &read, sizeof(read));
+		capacity = read.capacity;
+		mode = read.mode;
+		num_wraps = read.wrap_counter;
+		next_entry = read.write_counter;
+	} else
+		return;
+
+	/*
+	 * Unfortunately, the uCode doesn't use temporary variables.
+	 * Therefore, it can happen that we read next_entry == capacity,
+	 * which really means next_entry == 0.
+	 */
+	if (unlikely(next_entry == capacity))
+		next_entry = 0;
+	/*
+	 * Additionally, the uCode increases the write pointer before
+	 * the wraps counter, so if the write pointer is smaller than
+	 * the old write pointer (wrap occurred) but we read that no
+	 * wrap occurred, we actually read between the next_entry and
+	 * num_wraps update (this does happen in practice!!) -- take
+	 * that into account by increasing num_wraps.
+	 */
+	if (unlikely(next_entry < priv->event_log.next_entry &&
+		     num_wraps == priv->event_log.num_wraps))
+		num_wraps++;
+
+	if (num_wraps == priv->event_log.num_wraps) {
+		iwl_print_cont_event_trace(
+			priv, base, priv->event_log.next_entry,
+			next_entry - priv->event_log.next_entry,
+			capacity, mode);
+
+		priv->event_log.non_wraps_count++;
+	} else {
+		if (num_wraps - priv->event_log.num_wraps > 1)
+			priv->event_log.wraps_more_count++;
+		else
+			priv->event_log.wraps_once_count++;
+
+		trace_iwlwifi_dev_ucode_wrap_event(priv->trans->dev,
+				num_wraps - priv->event_log.num_wraps,
+				next_entry, priv->event_log.next_entry);
+
+		if (next_entry < priv->event_log.next_entry) {
+			iwl_print_cont_event_trace(
+				priv, base, priv->event_log.next_entry,
+				capacity - priv->event_log.next_entry,
+				capacity, mode);
+
+			iwl_print_cont_event_trace(
+				priv, base, 0, next_entry, capacity, mode);
+		} else {
+			iwl_print_cont_event_trace(
+				priv, base, next_entry,
+				capacity - next_entry,
+				capacity, mode);
+
+			iwl_print_cont_event_trace(
+				priv, base, 0, next_entry, capacity, mode);
+		}
+	}
+
+	priv->event_log.num_wraps = num_wraps;
+	priv->event_log.next_entry = next_entry;
+}
+
+/**
+ * iwl_bg_ucode_trace - Timer callback to log ucode event
+ *
+ * The timer is continually set to execute every
+ * UCODE_TRACE_PERIOD milliseconds after the last timer expired
+ * this function is to perform continuous uCode event logging operation
+ * if enabled
+ */
+static void iwl_bg_ucode_trace(unsigned long data)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)data;
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	if (priv->event_log.ucode_trace) {
+		iwl_continuous_event_trace(priv);
+		/* Reschedule the timer to occur in UCODE_TRACE_PERIOD */
+		mod_timer(&priv->ucode_trace,
+			 jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD));
+	}
+}
+
+static void iwl_bg_tx_flush(struct work_struct *work)
+{
+	struct iwl_priv *priv =
+		container_of(work, struct iwl_priv, tx_flush);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	/* do nothing if rf-kill is on */
+	if (!iwl_is_ready_rf(priv))
+		return;
+
+	IWL_DEBUG_INFO(priv, "device request: flush all tx frames\n");
+	iwlagn_dev_txfifo_flush(priv, IWL_DROP_ALL);
+}
+
+/*
+ * queue/FIFO/AC mapping definitions
+ */
+
+#define IWL_TX_FIFO_BK		0	/* shared */
+#define IWL_TX_FIFO_BE		1
+#define IWL_TX_FIFO_VI		2	/* shared */
+#define IWL_TX_FIFO_VO		3
+#define IWL_TX_FIFO_BK_IPAN	IWL_TX_FIFO_BK
+#define IWL_TX_FIFO_BE_IPAN	4
+#define IWL_TX_FIFO_VI_IPAN	IWL_TX_FIFO_VI
+#define IWL_TX_FIFO_VO_IPAN	5
+/* re-uses the VO FIFO, uCode will properly flush/schedule */
+#define IWL_TX_FIFO_AUX		5
+#define IWL_TX_FIFO_UNUSED	-1
+
+#define IWLAGN_CMD_FIFO_NUM	7
+
+/*
+ * This queue number is required for proper operation
+ * because the ucode will stop/start the scheduler as
+ * required.
+ */
+#define IWL_IPAN_MCAST_QUEUE	8
+
+static const u8 iwlagn_default_queue_to_tx_fifo[] = {
+	IWL_TX_FIFO_VO,
+	IWL_TX_FIFO_VI,
+	IWL_TX_FIFO_BE,
+	IWL_TX_FIFO_BK,
+	IWLAGN_CMD_FIFO_NUM,
+};
+
+static const u8 iwlagn_ipan_queue_to_tx_fifo[] = {
+	IWL_TX_FIFO_VO,
+	IWL_TX_FIFO_VI,
+	IWL_TX_FIFO_BE,
+	IWL_TX_FIFO_BK,
+	IWL_TX_FIFO_BK_IPAN,
+	IWL_TX_FIFO_BE_IPAN,
+	IWL_TX_FIFO_VI_IPAN,
+	IWL_TX_FIFO_VO_IPAN,
+	IWL_TX_FIFO_BE_IPAN,
+	IWLAGN_CMD_FIFO_NUM,
+	IWL_TX_FIFO_AUX,
+};
+
+static const u8 iwlagn_bss_ac_to_fifo[] = {
+	IWL_TX_FIFO_VO,
+	IWL_TX_FIFO_VI,
+	IWL_TX_FIFO_BE,
+	IWL_TX_FIFO_BK,
+};
+
+static const u8 iwlagn_bss_ac_to_queue[] = {
+	0, 1, 2, 3,
+};
+
+static const u8 iwlagn_pan_ac_to_fifo[] = {
+	IWL_TX_FIFO_VO_IPAN,
+	IWL_TX_FIFO_VI_IPAN,
+	IWL_TX_FIFO_BE_IPAN,
+	IWL_TX_FIFO_BK_IPAN,
+};
+
+static const u8 iwlagn_pan_ac_to_queue[] = {
+	7, 6, 5, 4,
+};
+
+static void iwl_init_context(struct iwl_priv *priv, u32 ucode_flags)
+{
+	int i;
+
+	/*
+	 * The default context is always valid,
+	 * the PAN context depends on uCode.
+	 */
+	priv->valid_contexts = BIT(IWL_RXON_CTX_BSS);
+	if (ucode_flags & IWL_UCODE_TLV_FLAGS_PAN)
+		priv->valid_contexts |= BIT(IWL_RXON_CTX_PAN);
+
+	for (i = 0; i < NUM_IWL_RXON_CTX; i++)
+		priv->contexts[i].ctxid = i;
+
+	priv->contexts[IWL_RXON_CTX_BSS].always_active = true;
+	priv->contexts[IWL_RXON_CTX_BSS].is_active = true;
+	priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON;
+	priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING;
+	priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC;
+	priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM;
+	priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID;
+	priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY;
+	priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWLAGN_BROADCAST_ID;
+	priv->contexts[IWL_RXON_CTX_BSS].exclusive_interface_modes =
+		BIT(NL80211_IFTYPE_ADHOC) | BIT(NL80211_IFTYPE_MONITOR);
+	priv->contexts[IWL_RXON_CTX_BSS].interface_modes =
+		BIT(NL80211_IFTYPE_STATION);
+	priv->contexts[IWL_RXON_CTX_BSS].ap_devtype = RXON_DEV_TYPE_AP;
+	priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS;
+	priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS;
+	priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS;
+	memcpy(priv->contexts[IWL_RXON_CTX_BSS].ac_to_queue,
+	       iwlagn_bss_ac_to_queue, sizeof(iwlagn_bss_ac_to_queue));
+	memcpy(priv->contexts[IWL_RXON_CTX_BSS].ac_to_fifo,
+	       iwlagn_bss_ac_to_fifo, sizeof(iwlagn_bss_ac_to_fifo));
+
+	priv->contexts[IWL_RXON_CTX_PAN].rxon_cmd = REPLY_WIPAN_RXON;
+	priv->contexts[IWL_RXON_CTX_PAN].rxon_timing_cmd =
+		REPLY_WIPAN_RXON_TIMING;
+	priv->contexts[IWL_RXON_CTX_PAN].rxon_assoc_cmd =
+		REPLY_WIPAN_RXON_ASSOC;
+	priv->contexts[IWL_RXON_CTX_PAN].qos_cmd = REPLY_WIPAN_QOS_PARAM;
+	priv->contexts[IWL_RXON_CTX_PAN].ap_sta_id = IWL_AP_ID_PAN;
+	priv->contexts[IWL_RXON_CTX_PAN].wep_key_cmd = REPLY_WIPAN_WEPKEY;
+	priv->contexts[IWL_RXON_CTX_PAN].bcast_sta_id = IWLAGN_PAN_BCAST_ID;
+	priv->contexts[IWL_RXON_CTX_PAN].station_flags = STA_FLG_PAN_STATION;
+	priv->contexts[IWL_RXON_CTX_PAN].interface_modes =
+		BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP);
+
+	if (ucode_flags & IWL_UCODE_TLV_FLAGS_P2P)
+		priv->contexts[IWL_RXON_CTX_PAN].interface_modes |=
+			BIT(NL80211_IFTYPE_P2P_CLIENT) |
+			BIT(NL80211_IFTYPE_P2P_GO);
+
+	priv->contexts[IWL_RXON_CTX_PAN].ap_devtype = RXON_DEV_TYPE_CP;
+	priv->contexts[IWL_RXON_CTX_PAN].station_devtype = RXON_DEV_TYPE_2STA;
+	priv->contexts[IWL_RXON_CTX_PAN].unused_devtype = RXON_DEV_TYPE_P2P;
+	memcpy(priv->contexts[IWL_RXON_CTX_PAN].ac_to_queue,
+	       iwlagn_pan_ac_to_queue, sizeof(iwlagn_pan_ac_to_queue));
+	memcpy(priv->contexts[IWL_RXON_CTX_PAN].ac_to_fifo,
+	       iwlagn_pan_ac_to_fifo, sizeof(iwlagn_pan_ac_to_fifo));
+	priv->contexts[IWL_RXON_CTX_PAN].mcast_queue = IWL_IPAN_MCAST_QUEUE;
+
+	BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
+}
+
+static void iwl_rf_kill_ct_config(struct iwl_priv *priv)
+{
+	struct iwl_ct_kill_config cmd;
+	struct iwl_ct_kill_throttling_config adv_cmd;
+	int ret = 0;
+
+	iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_CLR,
+		    CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
+
+	priv->thermal_throttle.ct_kill_toggle = false;
+
+	if (priv->cfg->base_params->support_ct_kill_exit) {
+		adv_cmd.critical_temperature_enter =
+			cpu_to_le32(priv->hw_params.ct_kill_threshold);
+		adv_cmd.critical_temperature_exit =
+			cpu_to_le32(priv->hw_params.ct_kill_exit_threshold);
+
+		ret = iwl_dvm_send_cmd_pdu(priv,
+				       REPLY_CT_KILL_CONFIG_CMD,
+				       CMD_SYNC, sizeof(adv_cmd), &adv_cmd);
+		if (ret)
+			IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
+		else
+			IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
+				"succeeded, critical temperature enter is %d,"
+				"exit is %d\n",
+				priv->hw_params.ct_kill_threshold,
+				priv->hw_params.ct_kill_exit_threshold);
+	} else {
+		cmd.critical_temperature_R =
+			cpu_to_le32(priv->hw_params.ct_kill_threshold);
+
+		ret = iwl_dvm_send_cmd_pdu(priv,
+				       REPLY_CT_KILL_CONFIG_CMD,
+				       CMD_SYNC, sizeof(cmd), &cmd);
+		if (ret)
+			IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
+		else
+			IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
+				"succeeded, "
+				"critical temperature is %d\n",
+				priv->hw_params.ct_kill_threshold);
+	}
+}
+
+static int iwlagn_send_calib_cfg_rt(struct iwl_priv *priv, u32 cfg)
+{
+	struct iwl_calib_cfg_cmd calib_cfg_cmd;
+	struct iwl_host_cmd cmd = {
+		.id = CALIBRATION_CFG_CMD,
+		.len = { sizeof(struct iwl_calib_cfg_cmd), },
+		.data = { &calib_cfg_cmd, },
+	};
+
+	memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd));
+	calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_RT_CFG_ALL;
+	calib_cfg_cmd.ucd_calib_cfg.once.start = cpu_to_le32(cfg);
+
+	return iwl_dvm_send_cmd(priv, &cmd);
+}
+
+
+static int iwlagn_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant)
+{
+	struct iwl_tx_ant_config_cmd tx_ant_cmd = {
+	  .valid = cpu_to_le32(valid_tx_ant),
+	};
+
+	if (IWL_UCODE_API(priv->fw->ucode_ver) > 1) {
+		IWL_DEBUG_HC(priv, "select valid tx ant: %u\n", valid_tx_ant);
+		return iwl_dvm_send_cmd_pdu(priv,
+					TX_ANT_CONFIGURATION_CMD,
+					CMD_SYNC,
+					sizeof(struct iwl_tx_ant_config_cmd),
+					&tx_ant_cmd);
+	} else {
+		IWL_DEBUG_HC(priv, "TX_ANT_CONFIGURATION_CMD not supported\n");
+		return -EOPNOTSUPP;
+	}
+}
+
+static void iwl_send_bt_config(struct iwl_priv *priv)
+{
+	struct iwl_bt_cmd bt_cmd = {
+		.lead_time = BT_LEAD_TIME_DEF,
+		.max_kill = BT_MAX_KILL_DEF,
+		.kill_ack_mask = 0,
+		.kill_cts_mask = 0,
+	};
+
+	if (!iwlwifi_mod_params.bt_coex_active)
+		bt_cmd.flags = BT_COEX_DISABLE;
+	else
+		bt_cmd.flags = BT_COEX_ENABLE;
+
+	priv->bt_enable_flag = bt_cmd.flags;
+	IWL_DEBUG_INFO(priv, "BT coex %s\n",
+		(bt_cmd.flags == BT_COEX_DISABLE) ? "disable" : "active");
+
+	if (iwl_dvm_send_cmd_pdu(priv, REPLY_BT_CONFIG,
+			     CMD_SYNC, sizeof(struct iwl_bt_cmd), &bt_cmd))
+		IWL_ERR(priv, "failed to send BT Coex Config\n");
+}
+
+/**
+ * iwl_alive_start - called after REPLY_ALIVE notification received
+ *                   from protocol/runtime uCode (initialization uCode's
+ *                   Alive gets handled by iwl_init_alive_start()).
+ */
+int iwl_alive_start(struct iwl_priv *priv)
+{
+	int ret = 0;
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+
+	IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
+
+	/* After the ALIVE response, we can send host commands to the uCode */
+	set_bit(STATUS_ALIVE, &priv->status);
+
+	if (iwl_is_rfkill(priv))
+		return -ERFKILL;
+
+	if (priv->event_log.ucode_trace) {
+		/* start collecting data now */
+		mod_timer(&priv->ucode_trace, jiffies);
+	}
+
+	/* download priority table before any calibration request */
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist) {
+		/* Configure Bluetooth device coexistence support */
+		if (priv->cfg->bt_params->bt_sco_disable)
+			priv->bt_enable_pspoll = false;
+		else
+			priv->bt_enable_pspoll = true;
+
+		priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK;
+		priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT;
+		priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT;
+		iwlagn_send_advance_bt_config(priv);
+		priv->bt_valid = IWLAGN_BT_VALID_ENABLE_FLAGS;
+		priv->cur_rssi_ctx = NULL;
+
+		iwl_send_prio_tbl(priv);
+
+		/* FIXME: w/a to force change uCode BT state machine */
+		ret = iwl_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
+					 BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
+		if (ret)
+			return ret;
+		ret = iwl_send_bt_env(priv, IWL_BT_COEX_ENV_CLOSE,
+					 BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
+		if (ret)
+			return ret;
+	} else {
+		/*
+		 * default is 2-wire BT coexexistence support
+		 */
+		iwl_send_bt_config(priv);
+	}
+
+	/*
+	 * Perform runtime calibrations, including DC calibration.
+	 */
+	iwlagn_send_calib_cfg_rt(priv, IWL_CALIB_CFG_DC_IDX);
+
+	ieee80211_wake_queues(priv->hw);
+
+	/* Configure Tx antenna selection based on H/W config */
+	iwlagn_send_tx_ant_config(priv, priv->eeprom_data->valid_tx_ant);
+
+	if (iwl_is_associated_ctx(ctx) && !priv->wowlan) {
+		struct iwl_rxon_cmd *active_rxon =
+				(struct iwl_rxon_cmd *)&ctx->active;
+		/* apply any changes in staging */
+		ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	} else {
+		struct iwl_rxon_context *tmp;
+		/* Initialize our rx_config data */
+		for_each_context(priv, tmp)
+			iwl_connection_init_rx_config(priv, tmp);
+
+		iwlagn_set_rxon_chain(priv, ctx);
+	}
+
+	if (!priv->wowlan) {
+		/* WoWLAN ucode will not reply in the same way, skip it */
+		iwl_reset_run_time_calib(priv);
+	}
+
+	set_bit(STATUS_READY, &priv->status);
+
+	/* Configure the adapter for unassociated operation */
+	ret = iwlagn_commit_rxon(priv, ctx);
+	if (ret)
+		return ret;
+
+	/* At this point, the NIC is initialized and operational */
+	iwl_rf_kill_ct_config(priv);
+
+	IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
+
+	return iwl_power_update_mode(priv, true);
+}
+
+/**
+ * iwl_clear_driver_stations - clear knowledge of all stations from driver
+ * @priv: iwl priv struct
+ *
+ * This is called during iwl_down() to make sure that in the case
+ * we're coming there from a hardware restart mac80211 will be
+ * able to reconfigure stations -- if we're getting there in the
+ * normal down flow then the stations will already be cleared.
+ */
+static void iwl_clear_driver_stations(struct iwl_priv *priv)
+{
+	struct iwl_rxon_context *ctx;
+
+	spin_lock_bh(&priv->sta_lock);
+	memset(priv->stations, 0, sizeof(priv->stations));
+	priv->num_stations = 0;
+
+	priv->ucode_key_table = 0;
+
+	for_each_context(priv, ctx) {
+		/*
+		 * Remove all key information that is not stored as part
+		 * of station information since mac80211 may not have had
+		 * a chance to remove all the keys. When device is
+		 * reconfigured by mac80211 after an error all keys will
+		 * be reconfigured.
+		 */
+		memset(ctx->wep_keys, 0, sizeof(ctx->wep_keys));
+		ctx->key_mapping_keys = 0;
+	}
+
+	spin_unlock_bh(&priv->sta_lock);
+}
+
+void iwl_down(struct iwl_priv *priv)
+{
+	int exit_pending;
+
+	IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
+
+	lockdep_assert_held(&priv->mutex);
+
+	iwl_scan_cancel_timeout(priv, 200);
+
+	/*
+	 * If active, scanning won't cancel it, so say it expired.
+	 * No race since we hold the mutex here and a new one
+	 * can't come in at this time.
+	 */
+	ieee80211_remain_on_channel_expired(priv->hw);
+
+	exit_pending =
+		test_and_set_bit(STATUS_EXIT_PENDING, &priv->status);
+
+	iwl_clear_ucode_stations(priv, NULL);
+	iwl_dealloc_bcast_stations(priv);
+	iwl_clear_driver_stations(priv);
+
+	/* reset BT coex data */
+	priv->bt_status = 0;
+	priv->cur_rssi_ctx = NULL;
+	priv->bt_is_sco = 0;
+	if (priv->cfg->bt_params)
+		priv->bt_traffic_load =
+			 priv->cfg->bt_params->bt_init_traffic_load;
+	else
+		priv->bt_traffic_load = 0;
+	priv->bt_full_concurrent = false;
+	priv->bt_ci_compliance = 0;
+
+	/* Wipe out the EXIT_PENDING status bit if we are not actually
+	 * exiting the module */
+	if (!exit_pending)
+		clear_bit(STATUS_EXIT_PENDING, &priv->status);
+
+	if (priv->mac80211_registered)
+		ieee80211_stop_queues(priv->hw);
+
+	priv->ucode_loaded = false;
+	iwl_trans_stop_device(priv->trans);
+
+	/* Set num_aux_in_flight must be done after the transport is stopped */
+	atomic_set(&priv->num_aux_in_flight, 0);
+
+	/* Clear out all status bits but a few that are stable across reset */
+	priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
+				STATUS_RF_KILL_HW |
+			test_bit(STATUS_FW_ERROR, &priv->status) <<
+				STATUS_FW_ERROR |
+			test_bit(STATUS_EXIT_PENDING, &priv->status) <<
+				STATUS_EXIT_PENDING;
+
+	dev_kfree_skb(priv->beacon_skb);
+	priv->beacon_skb = NULL;
+}
+
+/*****************************************************************************
+ *
+ * Workqueue callbacks
+ *
+ *****************************************************************************/
+
+static void iwl_bg_run_time_calib_work(struct work_struct *work)
+{
+	struct iwl_priv *priv = container_of(work, struct iwl_priv,
+			run_time_calib_work);
+
+	mutex_lock(&priv->mutex);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
+	    test_bit(STATUS_SCANNING, &priv->status)) {
+		mutex_unlock(&priv->mutex);
+		return;
+	}
+
+	if (priv->start_calib) {
+		iwl_chain_noise_calibration(priv);
+		iwl_sensitivity_calibration(priv);
+	}
+
+	mutex_unlock(&priv->mutex);
+}
+
+void iwlagn_prepare_restart(struct iwl_priv *priv)
+{
+	bool bt_full_concurrent;
+	u8 bt_ci_compliance;
+	u8 bt_load;
+	u8 bt_status;
+	bool bt_is_sco;
+	int i;
+
+	lockdep_assert_held(&priv->mutex);
+
+	priv->is_open = 0;
+
+	/*
+	 * __iwl_down() will clear the BT status variables,
+	 * which is correct, but when we restart we really
+	 * want to keep them so restore them afterwards.
+	 *
+	 * The restart process will later pick them up and
+	 * re-configure the hw when we reconfigure the BT
+	 * command.
+	 */
+	bt_full_concurrent = priv->bt_full_concurrent;
+	bt_ci_compliance = priv->bt_ci_compliance;
+	bt_load = priv->bt_traffic_load;
+	bt_status = priv->bt_status;
+	bt_is_sco = priv->bt_is_sco;
+
+	iwl_down(priv);
+
+	priv->bt_full_concurrent = bt_full_concurrent;
+	priv->bt_ci_compliance = bt_ci_compliance;
+	priv->bt_traffic_load = bt_load;
+	priv->bt_status = bt_status;
+	priv->bt_is_sco = bt_is_sco;
+
+	/* reset aggregation queues */
+	for (i = IWLAGN_FIRST_AMPDU_QUEUE; i < IWL_MAX_HW_QUEUES; i++)
+		priv->queue_to_mac80211[i] = IWL_INVALID_MAC80211_QUEUE;
+	/* and stop counts */
+	for (i = 0; i < IWL_MAX_HW_QUEUES; i++)
+		atomic_set(&priv->queue_stop_count[i], 0);
+
+	memset(priv->agg_q_alloc, 0, sizeof(priv->agg_q_alloc));
+}
+
+static void iwl_bg_restart(struct work_struct *data)
+{
+	struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
+		mutex_lock(&priv->mutex);
+		iwlagn_prepare_restart(priv);
+		mutex_unlock(&priv->mutex);
+		iwl_cancel_deferred_work(priv);
+		ieee80211_restart_hw(priv->hw);
+	} else {
+		WARN_ON(1);
+	}
+}
+
+
+
+
+void iwlagn_disable_roc(struct iwl_priv *priv)
+{
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_PAN];
+
+	lockdep_assert_held(&priv->mutex);
+
+	if (!priv->hw_roc_setup)
+		return;
+
+	ctx->staging.dev_type = RXON_DEV_TYPE_P2P;
+	ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+
+	priv->hw_roc_channel = NULL;
+
+	memset(ctx->staging.node_addr, 0, ETH_ALEN);
+
+	iwlagn_commit_rxon(priv, ctx);
+
+	ctx->is_active = false;
+	priv->hw_roc_setup = false;
+}
+
+static void iwlagn_disable_roc_work(struct work_struct *work)
+{
+	struct iwl_priv *priv = container_of(work, struct iwl_priv,
+					     hw_roc_disable_work.work);
+
+	mutex_lock(&priv->mutex);
+	iwlagn_disable_roc(priv);
+	mutex_unlock(&priv->mutex);
+}
+
+/*****************************************************************************
+ *
+ * driver setup and teardown
+ *
+ *****************************************************************************/
+
+static void iwl_setup_deferred_work(struct iwl_priv *priv)
+{
+	priv->workqueue = create_singlethread_workqueue(DRV_NAME);
+
+	INIT_WORK(&priv->restart, iwl_bg_restart);
+	INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update);
+	INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work);
+	INIT_WORK(&priv->tx_flush, iwl_bg_tx_flush);
+	INIT_WORK(&priv->bt_full_concurrency, iwl_bg_bt_full_concurrency);
+	INIT_WORK(&priv->bt_runtime_config, iwl_bg_bt_runtime_config);
+	INIT_DELAYED_WORK(&priv->hw_roc_disable_work,
+			  iwlagn_disable_roc_work);
+
+	iwl_setup_scan_deferred_work(priv);
+
+	if (priv->cfg->bt_params)
+		iwlagn_bt_setup_deferred_work(priv);
+
+	init_timer(&priv->statistics_periodic);
+	priv->statistics_periodic.data = (unsigned long)priv;
+	priv->statistics_periodic.function = iwl_bg_statistics_periodic;
+
+	init_timer(&priv->ucode_trace);
+	priv->ucode_trace.data = (unsigned long)priv;
+	priv->ucode_trace.function = iwl_bg_ucode_trace;
+}
+
+void iwl_cancel_deferred_work(struct iwl_priv *priv)
+{
+	if (priv->cfg->bt_params)
+		iwlagn_bt_cancel_deferred_work(priv);
+
+	cancel_work_sync(&priv->run_time_calib_work);
+	cancel_work_sync(&priv->beacon_update);
+
+	iwl_cancel_scan_deferred_work(priv);
+
+	cancel_work_sync(&priv->bt_full_concurrency);
+	cancel_work_sync(&priv->bt_runtime_config);
+	cancel_delayed_work_sync(&priv->hw_roc_disable_work);
+
+	del_timer_sync(&priv->statistics_periodic);
+	del_timer_sync(&priv->ucode_trace);
+}
+
+static int iwl_init_drv(struct iwl_priv *priv)
+{
+	spin_lock_init(&priv->sta_lock);
+
+	mutex_init(&priv->mutex);
+
+	INIT_LIST_HEAD(&priv->calib_results);
+
+	priv->band = IEEE80211_BAND_2GHZ;
+
+	priv->plcp_delta_threshold =
+		priv->cfg->base_params->plcp_delta_threshold;
+
+	priv->iw_mode = NL80211_IFTYPE_STATION;
+	priv->current_ht_config.smps = IEEE80211_SMPS_STATIC;
+	priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
+	priv->agg_tids_count = 0;
+
+	priv->ucode_owner = IWL_OWNERSHIP_DRIVER;
+
+	priv->rx_statistics_jiffies = jiffies;
+
+	/* Choose which receivers/antennas to use */
+	iwlagn_set_rxon_chain(priv, &priv->contexts[IWL_RXON_CTX_BSS]);
+
+	iwl_init_scan_params(priv);
+
+	/* init bt coex */
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist) {
+		priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT;
+		priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT;
+		priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK;
+		priv->bt_on_thresh = BT_ON_THRESHOLD_DEF;
+		priv->bt_duration = BT_DURATION_LIMIT_DEF;
+		priv->dynamic_frag_thresh = BT_FRAG_THRESHOLD_DEF;
+	}
+
+	return 0;
+}
+
+static void iwl_uninit_drv(struct iwl_priv *priv)
+{
+	kfree(priv->scan_cmd);
+	kfree(priv->beacon_cmd);
+	kfree(rcu_dereference_raw(priv->noa_data));
+	iwl_calib_free_results(priv);
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+	kfree(priv->wowlan_sram);
+#endif
+}
+
+static void iwl_set_hw_params(struct iwl_priv *priv)
+{
+	if (priv->cfg->ht_params)
+		priv->hw_params.use_rts_for_aggregation =
+			priv->cfg->ht_params->use_rts_for_aggregation;
+
+	/* Device-specific setup */
+	priv->lib->set_hw_params(priv);
+}
+
+
+
+/* show what optional capabilities we have */
+static void iwl_option_config(struct iwl_priv *priv)
+{
+#ifdef CONFIG_IWLWIFI_DEBUG
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUG enabled\n");
+#else
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUG disabled\n");
+#endif
+
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUGFS enabled\n");
+#else
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEBUGFS disabled\n");
+#endif
+
+#ifdef CONFIG_IWLWIFI_DEVICE_TRACING
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEVICE_TRACING enabled\n");
+#else
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEVICE_TRACING disabled\n");
+#endif
+
+#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEVICE_TESTMODE enabled\n");
+#else
+	IWL_INFO(priv, "CONFIG_IWLWIFI_DEVICE_TESTMODE disabled\n");
+#endif
+
+#ifdef CONFIG_IWLWIFI_P2P
+	IWL_INFO(priv, "CONFIG_IWLWIFI_P2P enabled\n");
+#else
+	IWL_INFO(priv, "CONFIG_IWLWIFI_P2P disabled\n");
+#endif
+}
+
+static int iwl_eeprom_init_hw_params(struct iwl_priv *priv)
+{
+	u16 radio_cfg;
+
+	priv->eeprom_data->sku = priv->eeprom_data->sku;
+
+	if (priv->eeprom_data->sku & EEPROM_SKU_CAP_11N_ENABLE &&
+	    !priv->cfg->ht_params) {
+		IWL_ERR(priv, "Invalid 11n configuration\n");
+		return -EINVAL;
+	}
+
+	if (!priv->eeprom_data->sku) {
+		IWL_ERR(priv, "Invalid device sku\n");
+		return -EINVAL;
+	}
+
+	IWL_INFO(priv, "Device SKU: 0x%X\n", priv->eeprom_data->sku);
+
+	radio_cfg = priv->eeprom_data->radio_cfg;
+
+	priv->hw_params.tx_chains_num =
+		num_of_ant(priv->eeprom_data->valid_tx_ant);
+	if (priv->cfg->rx_with_siso_diversity)
+		priv->hw_params.rx_chains_num = 1;
+	else
+		priv->hw_params.rx_chains_num =
+			num_of_ant(priv->eeprom_data->valid_rx_ant);
+
+	IWL_INFO(priv, "Valid Tx ant: 0x%X, Valid Rx ant: 0x%X\n",
+		 priv->eeprom_data->valid_tx_ant,
+		 priv->eeprom_data->valid_rx_ant);
+
+	return 0;
+}
+
+static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans,
+						 const struct iwl_cfg *cfg,
+						 const struct iwl_fw *fw)
+{
+	struct iwl_priv *priv;
+	struct ieee80211_hw *hw;
+	struct iwl_op_mode *op_mode;
+	u16 num_mac;
+	u32 ucode_flags;
+	struct iwl_trans_config trans_cfg;
+	static const u8 no_reclaim_cmds[] = {
+		REPLY_RX_PHY_CMD,
+		REPLY_RX,
+		REPLY_RX_MPDU_CMD,
+		REPLY_COMPRESSED_BA,
+		STATISTICS_NOTIFICATION,
+		REPLY_TX,
+	};
+	int i;
+
+	/************************
+	 * 1. Allocating HW data
+	 ************************/
+	hw = iwl_alloc_all();
+	if (!hw) {
+		pr_err("%s: Cannot allocate network device\n", cfg->name);
+		goto out;
+	}
+
+	op_mode = hw->priv;
+	op_mode->ops = &iwl_dvm_ops;
+	priv = IWL_OP_MODE_GET_DVM(op_mode);
+	priv->trans = trans;
+	priv->dev = trans->dev;
+	priv->cfg = cfg;
+	priv->fw = fw;
+
+	switch (priv->cfg->device_family) {
+	case IWL_DEVICE_FAMILY_1000:
+	case IWL_DEVICE_FAMILY_100:
+		priv->lib = &iwl1000_lib;
+		break;
+	case IWL_DEVICE_FAMILY_2000:
+	case IWL_DEVICE_FAMILY_105:
+		priv->lib = &iwl2000_lib;
+		break;
+	case IWL_DEVICE_FAMILY_2030:
+	case IWL_DEVICE_FAMILY_135:
+		priv->lib = &iwl2030_lib;
+		break;
+	case IWL_DEVICE_FAMILY_5000:
+		priv->lib = &iwl5000_lib;
+		break;
+	case IWL_DEVICE_FAMILY_5150:
+		priv->lib = &iwl5150_lib;
+		break;
+	case IWL_DEVICE_FAMILY_6000:
+	case IWL_DEVICE_FAMILY_6005:
+	case IWL_DEVICE_FAMILY_6000i:
+	case IWL_DEVICE_FAMILY_6050:
+	case IWL_DEVICE_FAMILY_6150:
+		priv->lib = &iwl6000_lib;
+		break;
+	case IWL_DEVICE_FAMILY_6030:
+		priv->lib = &iwl6030_lib;
+		break;
+	default:
+		break;
+	}
+
+	if (WARN_ON(!priv->lib))
+		goto out_free_hw;
+
+	/*
+	 * Populate the state variables that the transport layer needs
+	 * to know about.
+	 */
+	trans_cfg.op_mode = op_mode;
+	trans_cfg.no_reclaim_cmds = no_reclaim_cmds;
+	trans_cfg.n_no_reclaim_cmds = ARRAY_SIZE(no_reclaim_cmds);
+	trans_cfg.rx_buf_size_8k = iwlwifi_mod_params.amsdu_size_8K;
+	if (!iwlwifi_mod_params.wd_disable)
+		trans_cfg.queue_watchdog_timeout =
+			priv->cfg->base_params->wd_timeout;
+	else
+		trans_cfg.queue_watchdog_timeout = IWL_WATCHDOG_DISABLED;
+	trans_cfg.command_names = iwl_dvm_cmd_strings;
+
+	WARN_ON(sizeof(priv->transport_queue_stop) * BITS_PER_BYTE <
+		priv->cfg->base_params->num_of_queues);
+
+	ucode_flags = fw->ucode_capa.flags;
+
+#ifndef CONFIG_IWLWIFI_P2P
+	ucode_flags &= ~IWL_UCODE_TLV_FLAGS_P2P;
+#endif
+
+	if (ucode_flags & IWL_UCODE_TLV_FLAGS_PAN) {
+		priv->sta_key_max_num = STA_KEY_MAX_NUM_PAN;
+		trans_cfg.cmd_queue = IWL_IPAN_CMD_QUEUE_NUM;
+		trans_cfg.queue_to_fifo = iwlagn_ipan_queue_to_tx_fifo;
+		trans_cfg.n_queue_to_fifo =
+			ARRAY_SIZE(iwlagn_ipan_queue_to_tx_fifo);
+	} else {
+		priv->sta_key_max_num = STA_KEY_MAX_NUM;
+		trans_cfg.cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM;
+		trans_cfg.queue_to_fifo = iwlagn_default_queue_to_tx_fifo;
+		trans_cfg.n_queue_to_fifo =
+			ARRAY_SIZE(iwlagn_default_queue_to_tx_fifo);
+	}
+
+	/* Configure transport layer */
+	iwl_trans_configure(priv->trans, &trans_cfg);
+
+	/* At this point both hw and priv are allocated. */
+
+	SET_IEEE80211_DEV(priv->hw, priv->trans->dev);
+
+	iwl_option_config(priv);
+
+	IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
+
+	/* is antenna coupling more than 35dB ? */
+	priv->bt_ant_couple_ok =
+		(iwlwifi_mod_params.ant_coupling >
+			IWL_BT_ANTENNA_COUPLING_THRESHOLD) ?
+			true : false;
+
+	/* enable/disable bt channel inhibition */
+	priv->bt_ch_announce = iwlwifi_mod_params.bt_ch_announce;
+	IWL_DEBUG_INFO(priv, "BT channel inhibition is %s\n",
+		       (priv->bt_ch_announce) ? "On" : "Off");
+
+	/* these spin locks will be used in apm_ops.init and EEPROM access
+	 * we should init now
+	 */
+	spin_lock_init(&priv->statistics.lock);
+
+	/***********************
+	 * 2. Read REV register
+	 ***********************/
+	IWL_INFO(priv, "Detected %s, REV=0x%X\n",
+		priv->cfg->name, priv->trans->hw_rev);
+
+	if (iwl_trans_start_hw(priv->trans))
+		goto out_free_hw;
+
+	/* Read the EEPROM */
+	if (iwl_read_eeprom(priv->trans, &priv->eeprom_blob,
+			    &priv->eeprom_blob_size)) {
+		IWL_ERR(priv, "Unable to init EEPROM\n");
+		goto out_free_hw;
+	}
+
+	/* Reset chip to save power until we load uCode during "up". */
+	iwl_trans_stop_hw(priv->trans, false);
+
+	priv->eeprom_data = iwl_parse_eeprom_data(priv->trans->dev, priv->cfg,
+						  priv->eeprom_blob,
+						  priv->eeprom_blob_size);
+	if (!priv->eeprom_data)
+		goto out_free_eeprom_blob;
+
+	if (iwl_eeprom_check_version(priv->eeprom_data, priv->trans))
+		goto out_free_eeprom;
+
+	if (iwl_eeprom_init_hw_params(priv))
+		goto out_free_eeprom;
+
+	/* extract MAC Address */
+	memcpy(priv->addresses[0].addr, priv->eeprom_data->hw_addr, ETH_ALEN);
+	IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->addresses[0].addr);
+	priv->hw->wiphy->addresses = priv->addresses;
+	priv->hw->wiphy->n_addresses = 1;
+	num_mac = priv->eeprom_data->n_hw_addrs;
+	if (num_mac > 1) {
+		memcpy(priv->addresses[1].addr, priv->addresses[0].addr,
+		       ETH_ALEN);
+		priv->addresses[1].addr[5]++;
+		priv->hw->wiphy->n_addresses++;
+	}
+
+	/************************
+	 * 4. Setup HW constants
+	 ************************/
+	iwl_set_hw_params(priv);
+
+	if (!(priv->eeprom_data->sku & EEPROM_SKU_CAP_IPAN_ENABLE)) {
+		IWL_DEBUG_INFO(priv, "Your EEPROM disabled PAN");
+		ucode_flags &= ~IWL_UCODE_TLV_FLAGS_PAN;
+		/*
+		 * if not PAN, then don't support P2P -- might be a uCode
+		 * packaging bug or due to the eeprom check above
+		 */
+		ucode_flags &= ~IWL_UCODE_TLV_FLAGS_P2P;
+		priv->sta_key_max_num = STA_KEY_MAX_NUM;
+		trans_cfg.cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM;
+		trans_cfg.queue_to_fifo = iwlagn_default_queue_to_tx_fifo;
+		trans_cfg.n_queue_to_fifo =
+			ARRAY_SIZE(iwlagn_default_queue_to_tx_fifo);
+
+		/* Configure transport layer again*/
+		iwl_trans_configure(priv->trans, &trans_cfg);
+	}
+
+	/*******************
+	 * 5. Setup priv
+	 *******************/
+	for (i = 0; i < IWL_MAX_HW_QUEUES; i++) {
+		priv->queue_to_mac80211[i] = IWL_INVALID_MAC80211_QUEUE;
+		if (i < IWLAGN_FIRST_AMPDU_QUEUE &&
+		    i != IWL_DEFAULT_CMD_QUEUE_NUM &&
+		    i != IWL_IPAN_CMD_QUEUE_NUM)
+			priv->queue_to_mac80211[i] = i;
+		atomic_set(&priv->queue_stop_count[i], 0);
+	}
+
+	WARN_ON(trans_cfg.queue_to_fifo[trans_cfg.cmd_queue] !=
+						IWLAGN_CMD_FIFO_NUM);
+
+	if (iwl_init_drv(priv))
+		goto out_free_eeprom;
+
+	/* At this point both hw and priv are initialized. */
+
+	/********************
+	 * 6. Setup services
+	 ********************/
+	iwl_setup_deferred_work(priv);
+	iwl_setup_rx_handlers(priv);
+	iwl_testmode_init(priv);
+
+	iwl_power_initialize(priv);
+	iwl_tt_initialize(priv);
+
+	snprintf(priv->hw->wiphy->fw_version,
+		 sizeof(priv->hw->wiphy->fw_version),
+		 "%s", fw->fw_version);
+
+	priv->new_scan_threshold_behaviour =
+		!!(ucode_flags & IWL_UCODE_TLV_FLAGS_NEWSCAN);
+
+	priv->phy_calib_chain_noise_reset_cmd =
+		fw->ucode_capa.standard_phy_calibration_size;
+	priv->phy_calib_chain_noise_gain_cmd =
+		fw->ucode_capa.standard_phy_calibration_size + 1;
+
+	/* initialize all valid contexts */
+	iwl_init_context(priv, ucode_flags);
+
+	/**************************************************
+	 * This is still part of probe() in a sense...
+	 *
+	 * 7. Setup and register with mac80211 and debugfs
+	 **************************************************/
+	if (iwlagn_mac_setup_register(priv, &fw->ucode_capa))
+		goto out_destroy_workqueue;
+
+	if (iwl_dbgfs_register(priv, DRV_NAME))
+		IWL_ERR(priv,
+			"failed to create debugfs files. Ignoring error\n");
+
+	return op_mode;
+
+out_destroy_workqueue:
+	destroy_workqueue(priv->workqueue);
+	priv->workqueue = NULL;
+	iwl_uninit_drv(priv);
+out_free_eeprom_blob:
+	kfree(priv->eeprom_blob);
+out_free_eeprom:
+	iwl_free_eeprom_data(priv->eeprom_data);
+out_free_hw:
+	ieee80211_free_hw(priv->hw);
+out:
+	op_mode = NULL;
+	return op_mode;
+}
+
+static void iwl_op_mode_dvm_stop(struct iwl_op_mode *op_mode)
+{
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+
+	IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
+
+	iwl_dbgfs_unregister(priv);
+
+	iwl_testmode_free(priv);
+	iwlagn_mac_unregister(priv);
+
+	iwl_tt_exit(priv);
+
+	/*This will stop the queues, move the device to low power state */
+	priv->ucode_loaded = false;
+	iwl_trans_stop_device(priv->trans);
+
+	kfree(priv->eeprom_blob);
+	iwl_free_eeprom_data(priv->eeprom_data);
+
+	/*netif_stop_queue(dev); */
+	flush_workqueue(priv->workqueue);
+
+	/* ieee80211_unregister_hw calls iwlagn_mac_stop, which flushes
+	 * priv->workqueue... so we can't take down the workqueue
+	 * until now... */
+	destroy_workqueue(priv->workqueue);
+	priv->workqueue = NULL;
+
+	iwl_uninit_drv(priv);
+
+	dev_kfree_skb(priv->beacon_skb);
+
+	iwl_trans_stop_hw(priv->trans, true);
+	ieee80211_free_hw(priv->hw);
+}
+
+static const char * const desc_lookup_text[] = {
+	"OK",
+	"FAIL",
+	"BAD_PARAM",
+	"BAD_CHECKSUM",
+	"NMI_INTERRUPT_WDG",
+	"SYSASSERT",
+	"FATAL_ERROR",
+	"BAD_COMMAND",
+	"HW_ERROR_TUNE_LOCK",
+	"HW_ERROR_TEMPERATURE",
+	"ILLEGAL_CHAN_FREQ",
+	"VCC_NOT_STABLE",
+	"FH_ERROR",
+	"NMI_INTERRUPT_HOST",
+	"NMI_INTERRUPT_ACTION_PT",
+	"NMI_INTERRUPT_UNKNOWN",
+	"UCODE_VERSION_MISMATCH",
+	"HW_ERROR_ABS_LOCK",
+	"HW_ERROR_CAL_LOCK_FAIL",
+	"NMI_INTERRUPT_INST_ACTION_PT",
+	"NMI_INTERRUPT_DATA_ACTION_PT",
+	"NMI_TRM_HW_ER",
+	"NMI_INTERRUPT_TRM",
+	"NMI_INTERRUPT_BREAK_POINT",
+	"DEBUG_0",
+	"DEBUG_1",
+	"DEBUG_2",
+	"DEBUG_3",
+};
+
+static struct { char *name; u8 num; } advanced_lookup[] = {
+	{ "NMI_INTERRUPT_WDG", 0x34 },
+	{ "SYSASSERT", 0x35 },
+	{ "UCODE_VERSION_MISMATCH", 0x37 },
+	{ "BAD_COMMAND", 0x38 },
+	{ "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C },
+	{ "FATAL_ERROR", 0x3D },
+	{ "NMI_TRM_HW_ERR", 0x46 },
+	{ "NMI_INTERRUPT_TRM", 0x4C },
+	{ "NMI_INTERRUPT_BREAK_POINT", 0x54 },
+	{ "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C },
+	{ "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64 },
+	{ "NMI_INTERRUPT_HOST", 0x66 },
+	{ "NMI_INTERRUPT_ACTION_PT", 0x7C },
+	{ "NMI_INTERRUPT_UNKNOWN", 0x84 },
+	{ "NMI_INTERRUPT_INST_ACTION_PT", 0x86 },
+	{ "ADVANCED_SYSASSERT", 0 },
+};
+
+static const char *desc_lookup(u32 num)
+{
+	int i;
+	int max = ARRAY_SIZE(desc_lookup_text);
+
+	if (num < max)
+		return desc_lookup_text[num];
+
+	max = ARRAY_SIZE(advanced_lookup) - 1;
+	for (i = 0; i < max; i++) {
+		if (advanced_lookup[i].num == num)
+			break;
+	}
+	return advanced_lookup[i].name;
+}
+
+#define ERROR_START_OFFSET  (1 * sizeof(u32))
+#define ERROR_ELEM_SIZE     (7 * sizeof(u32))
+
+static void iwl_dump_nic_error_log(struct iwl_priv *priv)
+{
+	struct iwl_trans *trans = priv->trans;
+	u32 base;
+	struct iwl_error_event_table table;
+
+	base = priv->device_pointers.error_event_table;
+	if (priv->cur_ucode == IWL_UCODE_INIT) {
+		if (!base)
+			base = priv->fw->init_errlog_ptr;
+	} else {
+		if (!base)
+			base = priv->fw->inst_errlog_ptr;
+	}
+
+	if (!iwlagn_hw_valid_rtc_data_addr(base)) {
+		IWL_ERR(priv,
+			"Not valid error log pointer 0x%08X for %s uCode\n",
+			base,
+			(priv->cur_ucode == IWL_UCODE_INIT)
+					? "Init" : "RT");
+		return;
+	}
+
+	/*TODO: Update dbgfs with ISR error stats obtained below */
+	iwl_read_targ_mem_bytes(trans, base, &table, sizeof(table));
+
+	if (ERROR_START_OFFSET <= table.valid * ERROR_ELEM_SIZE) {
+		IWL_ERR(trans, "Start IWL Error Log Dump:\n");
+		IWL_ERR(trans, "Status: 0x%08lX, count: %d\n",
+			priv->status, table.valid);
+	}
+
+	trace_iwlwifi_dev_ucode_error(trans->dev, table.error_id, table.tsf_low,
+				      table.data1, table.data2, table.line,
+				      table.blink1, table.blink2, table.ilink1,
+				      table.ilink2, table.bcon_time, table.gp1,
+				      table.gp2, table.gp3, table.ucode_ver,
+				      table.hw_ver, table.brd_ver);
+	IWL_ERR(priv, "0x%08X | %-28s\n", table.error_id,
+		desc_lookup(table.error_id));
+	IWL_ERR(priv, "0x%08X | uPc\n", table.pc);
+	IWL_ERR(priv, "0x%08X | branchlink1\n", table.blink1);
+	IWL_ERR(priv, "0x%08X | branchlink2\n", table.blink2);
+	IWL_ERR(priv, "0x%08X | interruptlink1\n", table.ilink1);
+	IWL_ERR(priv, "0x%08X | interruptlink2\n", table.ilink2);
+	IWL_ERR(priv, "0x%08X | data1\n", table.data1);
+	IWL_ERR(priv, "0x%08X | data2\n", table.data2);
+	IWL_ERR(priv, "0x%08X | line\n", table.line);
+	IWL_ERR(priv, "0x%08X | beacon time\n", table.bcon_time);
+	IWL_ERR(priv, "0x%08X | tsf low\n", table.tsf_low);
+	IWL_ERR(priv, "0x%08X | tsf hi\n", table.tsf_hi);
+	IWL_ERR(priv, "0x%08X | time gp1\n", table.gp1);
+	IWL_ERR(priv, "0x%08X | time gp2\n", table.gp2);
+	IWL_ERR(priv, "0x%08X | time gp3\n", table.gp3);
+	IWL_ERR(priv, "0x%08X | uCode version\n", table.ucode_ver);
+	IWL_ERR(priv, "0x%08X | hw version\n", table.hw_ver);
+	IWL_ERR(priv, "0x%08X | board version\n", table.brd_ver);
+	IWL_ERR(priv, "0x%08X | hcmd\n", table.hcmd);
+	IWL_ERR(priv, "0x%08X | isr0\n", table.isr0);
+	IWL_ERR(priv, "0x%08X | isr1\n", table.isr1);
+	IWL_ERR(priv, "0x%08X | isr2\n", table.isr2);
+	IWL_ERR(priv, "0x%08X | isr3\n", table.isr3);
+	IWL_ERR(priv, "0x%08X | isr4\n", table.isr4);
+	IWL_ERR(priv, "0x%08X | isr_pref\n", table.isr_pref);
+	IWL_ERR(priv, "0x%08X | wait_event\n", table.wait_event);
+	IWL_ERR(priv, "0x%08X | l2p_control\n", table.l2p_control);
+	IWL_ERR(priv, "0x%08X | l2p_duration\n", table.l2p_duration);
+	IWL_ERR(priv, "0x%08X | l2p_mhvalid\n", table.l2p_mhvalid);
+	IWL_ERR(priv, "0x%08X | l2p_addr_match\n", table.l2p_addr_match);
+	IWL_ERR(priv, "0x%08X | lmpm_pmg_sel\n", table.lmpm_pmg_sel);
+	IWL_ERR(priv, "0x%08X | timestamp\n", table.u_timestamp);
+	IWL_ERR(priv, "0x%08X | flow_handler\n", table.flow_handler);
+}
+
+#define EVENT_START_OFFSET  (4 * sizeof(u32))
+
+/**
+ * iwl_print_event_log - Dump error event log to syslog
+ *
+ */
+static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
+			       u32 num_events, u32 mode,
+			       int pos, char **buf, size_t bufsz)
+{
+	u32 i;
+	u32 base;       /* SRAM byte address of event log header */
+	u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
+	u32 ptr;        /* SRAM byte address of log data */
+	u32 ev, time, data; /* event log data */
+	unsigned long reg_flags;
+
+	struct iwl_trans *trans = priv->trans;
+
+	if (num_events == 0)
+		return pos;
+
+	base = priv->device_pointers.log_event_table;
+	if (priv->cur_ucode == IWL_UCODE_INIT) {
+		if (!base)
+			base = priv->fw->init_evtlog_ptr;
+	} else {
+		if (!base)
+			base = priv->fw->inst_evtlog_ptr;
+	}
+
+	if (mode == 0)
+		event_size = 2 * sizeof(u32);
+	else
+		event_size = 3 * sizeof(u32);
+
+	ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
+
+	/* Make sure device is powered up for SRAM reads */
+	spin_lock_irqsave(&trans->reg_lock, reg_flags);
+	if (unlikely(!iwl_grab_nic_access(trans)))
+		goto out_unlock;
+
+	/* Set starting address; reads will auto-increment */
+	iwl_write32(trans, HBUS_TARG_MEM_RADDR, ptr);
+
+	/* "time" is actually "data" for mode 0 (no timestamp).
+	* place event id # at far right for easier visual parsing. */
+	for (i = 0; i < num_events; i++) {
+		ev = iwl_read32(trans, HBUS_TARG_MEM_RDAT);
+		time = iwl_read32(trans, HBUS_TARG_MEM_RDAT);
+		if (mode == 0) {
+			/* data, ev */
+			if (bufsz) {
+				pos += scnprintf(*buf + pos, bufsz - pos,
+						"EVT_LOG:0x%08x:%04u\n",
+						time, ev);
+			} else {
+				trace_iwlwifi_dev_ucode_event(trans->dev, 0,
+					time, ev);
+				IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n",
+					time, ev);
+			}
+		} else {
+			data = iwl_read32(trans, HBUS_TARG_MEM_RDAT);
+			if (bufsz) {
+				pos += scnprintf(*buf + pos, bufsz - pos,
+						"EVT_LOGT:%010u:0x%08x:%04u\n",
+						 time, data, ev);
+			} else {
+				IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
+					time, data, ev);
+				trace_iwlwifi_dev_ucode_event(trans->dev, time,
+					data, ev);
+			}
+		}
+	}
+
+	/* Allow device to power down */
+	iwl_release_nic_access(trans);
+out_unlock:
+	spin_unlock_irqrestore(&trans->reg_lock, reg_flags);
+	return pos;
+}
+
+/**
+ * iwl_print_last_event_logs - Dump the newest # of event log to syslog
+ */
+static int iwl_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
+				    u32 num_wraps, u32 next_entry,
+				    u32 size, u32 mode,
+				    int pos, char **buf, size_t bufsz)
+{
+	/*
+	 * display the newest DEFAULT_LOG_ENTRIES entries
+	 * i.e the entries just before the next ont that uCode would fill.
+	 */
+	if (num_wraps) {
+		if (next_entry < size) {
+			pos = iwl_print_event_log(priv,
+						capacity - (size - next_entry),
+						size - next_entry, mode,
+						pos, buf, bufsz);
+			pos = iwl_print_event_log(priv, 0,
+						  next_entry, mode,
+						  pos, buf, bufsz);
+		} else
+			pos = iwl_print_event_log(priv, next_entry - size,
+						  size, mode, pos, buf, bufsz);
+	} else {
+		if (next_entry < size) {
+			pos = iwl_print_event_log(priv, 0, next_entry,
+						  mode, pos, buf, bufsz);
+		} else {
+			pos = iwl_print_event_log(priv, next_entry - size,
+						  size, mode, pos, buf, bufsz);
+		}
+	}
+	return pos;
+}
+
+#define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20)
+
+int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
+			    char **buf, bool display)
+{
+	u32 base;       /* SRAM byte address of event log header */
+	u32 capacity;   /* event log capacity in # entries */
+	u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
+	u32 num_wraps;  /* # times uCode wrapped to top of log */
+	u32 next_entry; /* index of next entry to be written by uCode */
+	u32 size;       /* # entries that we'll print */
+	u32 logsize;
+	int pos = 0;
+	size_t bufsz = 0;
+	struct iwl_trans *trans = priv->trans;
+
+	base = priv->device_pointers.log_event_table;
+	if (priv->cur_ucode == IWL_UCODE_INIT) {
+		logsize = priv->fw->init_evtlog_size;
+		if (!base)
+			base = priv->fw->init_evtlog_ptr;
+	} else {
+		logsize = priv->fw->inst_evtlog_size;
+		if (!base)
+			base = priv->fw->inst_evtlog_ptr;
+	}
+
+	if (!iwlagn_hw_valid_rtc_data_addr(base)) {
+		IWL_ERR(priv,
+			"Invalid event log pointer 0x%08X for %s uCode\n",
+			base,
+			(priv->cur_ucode == IWL_UCODE_INIT)
+					? "Init" : "RT");
+		return -EINVAL;
+	}
+
+	/* event log header */
+	capacity = iwl_read_targ_mem(trans, base);
+	mode = iwl_read_targ_mem(trans, base + (1 * sizeof(u32)));
+	num_wraps = iwl_read_targ_mem(trans, base + (2 * sizeof(u32)));
+	next_entry = iwl_read_targ_mem(trans, base + (3 * sizeof(u32)));
+
+	if (capacity > logsize) {
+		IWL_ERR(priv, "Log capacity %d is bogus, limit to %d "
+			"entries\n", capacity, logsize);
+		capacity = logsize;
+	}
+
+	if (next_entry > logsize) {
+		IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n",
+			next_entry, logsize);
+		next_entry = logsize;
+	}
+
+	size = num_wraps ? capacity : next_entry;
+
+	/* bail out if nothing in log */
+	if (size == 0) {
+		IWL_ERR(trans, "Start IWL Event Log Dump: nothing in log\n");
+		return pos;
+	}
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (!(iwl_have_debug_level(IWL_DL_FW_ERRORS)) && !full_log)
+		size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
+			? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
+#else
+	size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
+		? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
+#endif
+	IWL_ERR(priv, "Start IWL Event Log Dump: display last %u entries\n",
+		size);
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (display) {
+		if (full_log)
+			bufsz = capacity * 48;
+		else
+			bufsz = size * 48;
+		*buf = kmalloc(bufsz, GFP_KERNEL);
+		if (!*buf)
+			return -ENOMEM;
+	}
+	if (iwl_have_debug_level(IWL_DL_FW_ERRORS) || full_log) {
+		/*
+		 * if uCode has wrapped back to top of log,
+		 * start at the oldest entry,
+		 * i.e the next one that uCode would fill.
+		 */
+		if (num_wraps)
+			pos = iwl_print_event_log(priv, next_entry,
+						capacity - next_entry, mode,
+						pos, buf, bufsz);
+		/* (then/else) start at top of log */
+		pos = iwl_print_event_log(priv, 0,
+					  next_entry, mode, pos, buf, bufsz);
+	} else
+		pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
+						next_entry, size, mode,
+						pos, buf, bufsz);
+#else
+	pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
+					next_entry, size, mode,
+					pos, buf, bufsz);
+#endif
+	return pos;
+}
+
+static void iwlagn_fw_error(struct iwl_priv *priv, bool ondemand)
+{
+	unsigned int reload_msec;
+	unsigned long reload_jiffies;
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (iwl_have_debug_level(IWL_DL_FW_ERRORS))
+		iwl_print_rx_config_cmd(priv, IWL_RXON_CTX_BSS);
+#endif
+
+	/* uCode is no longer loaded. */
+	priv->ucode_loaded = false;
+
+	/* Set the FW error flag -- cleared on iwl_down */
+	set_bit(STATUS_FW_ERROR, &priv->status);
+
+	iwl_abort_notification_waits(&priv->notif_wait);
+
+	/* Keep the restart process from trying to send host
+	 * commands by clearing the ready bit */
+	clear_bit(STATUS_READY, &priv->status);
+
+	wake_up(&priv->trans->wait_command_queue);
+
+	if (!ondemand) {
+		/*
+		 * If firmware keep reloading, then it indicate something
+		 * serious wrong and firmware having problem to recover
+		 * from it. Instead of keep trying which will fill the syslog
+		 * and hang the system, let's just stop it
+		 */
+		reload_jiffies = jiffies;
+		reload_msec = jiffies_to_msecs((long) reload_jiffies -
+					(long) priv->reload_jiffies);
+		priv->reload_jiffies = reload_jiffies;
+		if (reload_msec <= IWL_MIN_RELOAD_DURATION) {
+			priv->reload_count++;
+			if (priv->reload_count >= IWL_MAX_CONTINUE_RELOAD_CNT) {
+				IWL_ERR(priv, "BUG_ON, Stop restarting\n");
+				return;
+			}
+		} else
+			priv->reload_count = 0;
+	}
+
+	if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) {
+		if (iwlwifi_mod_params.restart_fw) {
+			IWL_DEBUG_FW_ERRORS(priv,
+				  "Restarting adapter due to uCode error.\n");
+			queue_work(priv->workqueue, &priv->restart);
+		} else
+			IWL_DEBUG_FW_ERRORS(priv,
+				  "Detected FW error, but not restarting\n");
+	}
+}
+
+static void iwl_nic_error(struct iwl_op_mode *op_mode)
+{
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+
+	IWL_ERR(priv, "Loaded firmware version: %s\n",
+		priv->fw->fw_version);
+
+	iwl_dump_nic_error_log(priv);
+	iwl_dump_nic_event_log(priv, false, NULL, false);
+
+	iwlagn_fw_error(priv, false);
+}
+
+static void iwl_cmd_queue_full(struct iwl_op_mode *op_mode)
+{
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+
+	if (!iwl_check_for_ct_kill(priv)) {
+		IWL_ERR(priv, "Restarting adapter queue is full\n");
+		iwlagn_fw_error(priv, false);
+	}
+}
+
+#define EEPROM_RF_CONFIG_TYPE_MAX      0x3
+
+static void iwl_nic_config(struct iwl_op_mode *op_mode)
+{
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+	u16 radio_cfg = priv->eeprom_data->radio_cfg;
+
+	/* SKU Control */
+	iwl_set_bits_mask(priv->trans, CSR_HW_IF_CONFIG_REG,
+			  CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH |
+			  CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP,
+			  (CSR_HW_REV_STEP(priv->trans->hw_rev) <<
+				CSR_HW_IF_CONFIG_REG_POS_MAC_STEP) |
+			  (CSR_HW_REV_DASH(priv->trans->hw_rev) <<
+				CSR_HW_IF_CONFIG_REG_POS_MAC_DASH));
+
+	/* write radio config values to register */
+	if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX) {
+		u32 reg_val =
+			EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <<
+				CSR_HW_IF_CONFIG_REG_POS_PHY_TYPE |
+			EEPROM_RF_CFG_STEP_MSK(radio_cfg) <<
+				CSR_HW_IF_CONFIG_REG_POS_PHY_STEP |
+			EEPROM_RF_CFG_DASH_MSK(radio_cfg) <<
+				CSR_HW_IF_CONFIG_REG_POS_PHY_DASH;
+
+		iwl_set_bits_mask(priv->trans, CSR_HW_IF_CONFIG_REG,
+				  CSR_HW_IF_CONFIG_REG_MSK_PHY_TYPE |
+				  CSR_HW_IF_CONFIG_REG_MSK_PHY_STEP |
+				  CSR_HW_IF_CONFIG_REG_MSK_PHY_DASH, reg_val);
+
+		IWL_INFO(priv, "Radio type=0x%x-0x%x-0x%x\n",
+			 EEPROM_RF_CFG_TYPE_MSK(radio_cfg),
+			 EEPROM_RF_CFG_STEP_MSK(radio_cfg),
+			 EEPROM_RF_CFG_DASH_MSK(radio_cfg));
+	} else {
+		WARN_ON(1);
+	}
+
+	/* set CSR_HW_CONFIG_REG for uCode use */
+	iwl_set_bit(priv->trans, CSR_HW_IF_CONFIG_REG,
+		    CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
+		    CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
+
+	/* W/A : NIC is stuck in a reset state after Early PCIe power off
+	 * (PCIe power is lost before PERST# is asserted),
+	 * causing ME FW to lose ownership and not being able to obtain it back.
+	 */
+	iwl_set_bits_mask_prph(priv->trans, APMG_PS_CTRL_REG,
+			       APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS,
+			       ~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS);
+
+	if (priv->lib->nic_config)
+		priv->lib->nic_config(priv);
+}
+
+static void iwl_wimax_active(struct iwl_op_mode *op_mode)
+{
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+
+	clear_bit(STATUS_READY, &priv->status);
+	IWL_ERR(priv, "RF is used by WiMAX\n");
+}
+
+static void iwl_stop_sw_queue(struct iwl_op_mode *op_mode, int queue)
+{
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+	int mq = priv->queue_to_mac80211[queue];
+
+	if (WARN_ON_ONCE(mq == IWL_INVALID_MAC80211_QUEUE))
+		return;
+
+	if (atomic_inc_return(&priv->queue_stop_count[mq]) > 1) {
+		IWL_DEBUG_TX_QUEUES(priv,
+			"queue %d (mac80211 %d) already stopped\n",
+			queue, mq);
+		return;
+	}
+
+	set_bit(mq, &priv->transport_queue_stop);
+	ieee80211_stop_queue(priv->hw, mq);
+}
+
+static void iwl_wake_sw_queue(struct iwl_op_mode *op_mode, int queue)
+{
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+	int mq = priv->queue_to_mac80211[queue];
+
+	if (WARN_ON_ONCE(mq == IWL_INVALID_MAC80211_QUEUE))
+		return;
+
+	if (atomic_dec_return(&priv->queue_stop_count[mq]) > 0) {
+		IWL_DEBUG_TX_QUEUES(priv,
+			"queue %d (mac80211 %d) already awake\n",
+			queue, mq);
+		return;
+	}
+
+	clear_bit(mq, &priv->transport_queue_stop);
+
+	if (!priv->passive_no_rx)
+		ieee80211_wake_queue(priv->hw, mq);
+}
+
+void iwlagn_lift_passive_no_rx(struct iwl_priv *priv)
+{
+	int mq;
+
+	if (!priv->passive_no_rx)
+		return;
+
+	for (mq = 0; mq < IWLAGN_FIRST_AMPDU_QUEUE; mq++) {
+		if (!test_bit(mq, &priv->transport_queue_stop)) {
+			IWL_DEBUG_TX_QUEUES(priv, "Wake queue %d", mq);
+			ieee80211_wake_queue(priv->hw, mq);
+		} else {
+			IWL_DEBUG_TX_QUEUES(priv, "Don't wake queue %d", mq);
+		}
+	}
+
+	priv->passive_no_rx = false;
+}
+
+static void iwl_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb)
+{
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+	struct ieee80211_tx_info *info;
+
+	info = IEEE80211_SKB_CB(skb);
+	iwl_trans_free_tx_cmd(priv->trans, info->driver_data[1]);
+	dev_kfree_skb_any(skb);
+}
+
+static void iwl_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state)
+{
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+
+	if (state)
+		set_bit(STATUS_RF_KILL_HW, &priv->status);
+	else
+		clear_bit(STATUS_RF_KILL_HW, &priv->status);
+
+	wiphy_rfkill_set_hw_state(priv->hw->wiphy, state);
+}
+
+static const struct iwl_op_mode_ops iwl_dvm_ops = {
+	.start = iwl_op_mode_dvm_start,
+	.stop = iwl_op_mode_dvm_stop,
+	.rx = iwl_rx_dispatch,
+	.queue_full = iwl_stop_sw_queue,
+	.queue_not_full = iwl_wake_sw_queue,
+	.hw_rf_kill = iwl_set_hw_rfkill_state,
+	.free_skb = iwl_free_skb,
+	.nic_error = iwl_nic_error,
+	.cmd_queue_full = iwl_cmd_queue_full,
+	.nic_config = iwl_nic_config,
+	.wimax_active = iwl_wimax_active,
+};
+
+/*****************************************************************************
+ *
+ * driver and module entry point
+ *
+ *****************************************************************************/
+static int __init iwl_init(void)
+{
+
+	int ret;
+	pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
+	pr_info(DRV_COPYRIGHT "\n");
+
+	ret = iwlagn_rate_control_register();
+	if (ret) {
+		pr_err("Unable to register rate control algorithm: %d\n", ret);
+		return ret;
+	}
+
+	ret = iwl_opmode_register("iwldvm", &iwl_dvm_ops);
+	if (ret) {
+		pr_err("Unable to register op_mode: %d\n", ret);
+		iwlagn_rate_control_unregister();
+	}
+
+	return ret;
+}
+module_init(iwl_init);
+
+static void __exit iwl_exit(void)
+{
+	iwl_opmode_deregister("iwldvm");
+	iwlagn_rate_control_unregister();
+}
+module_exit(iwl_exit);
diff --git a/drivers/net/wireless/iwlwifi/dvm/power.c b/drivers/net/wireless/iwlwifi/dvm/power.c
new file mode 100644
index 00000000000..518cf371580
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/power.c
@@ -0,0 +1,387 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are derived from the ipw3945 project, as well
+ * as portions of the ieee80211 subsystem header files.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *****************************************************************************/
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <net/mac80211.h>
+#include "iwl-io.h"
+#include "iwl-debug.h"
+#include "iwl-trans.h"
+#include "iwl-modparams.h"
+#include "dev.h"
+#include "agn.h"
+#include "commands.h"
+#include "power.h"
+
+/*
+ * Setting power level allows the card to go to sleep when not busy.
+ *
+ * We calculate a sleep command based on the required latency, which
+ * we get from mac80211. In order to handle thermal throttling, we can
+ * also use pre-defined power levels.
+ */
+
+/*
+ * This defines the old power levels. They are still used by default
+ * (level 1) and for thermal throttle (levels 3 through 5)
+ */
+
+struct iwl_power_vec_entry {
+	struct iwl_powertable_cmd cmd;
+	u8 no_dtim;	/* number of skip dtim */
+};
+
+#define IWL_DTIM_RANGE_0_MAX	2
+#define IWL_DTIM_RANGE_1_MAX	10
+
+#define NOSLP cpu_to_le16(0), 0, 0
+#define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0
+#define ASLP (IWL_POWER_POWER_SAVE_ENA_MSK |	\
+		IWL_POWER_POWER_MANAGEMENT_ENA_MSK | \
+		IWL_POWER_ADVANCE_PM_ENA_MSK)
+#define ASLP_TOUT(T) cpu_to_le32(T)
+#define TU_TO_USEC 1024
+#define SLP_TOUT(T) cpu_to_le32((T) * TU_TO_USEC)
+#define SLP_VEC(X0, X1, X2, X3, X4) {cpu_to_le32(X0), \
+				     cpu_to_le32(X1), \
+				     cpu_to_le32(X2), \
+				     cpu_to_le32(X3), \
+				     cpu_to_le32(X4)}
+/* default power management (not Tx power) table values */
+/* for DTIM period 0 through IWL_DTIM_RANGE_0_MAX */
+/* DTIM 0 - 2 */
+static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = {
+	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 1, 2, 2, 0xFF)}, 0},
+	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
+	{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 2, 2, 2, 0xFF)}, 0},
+	{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 2, 4, 4, 0xFF)}, 1},
+	{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 2, 4, 6, 0xFF)}, 2}
+};
+
+
+/* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */
+/* DTIM 3 - 10 */
+static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = {
+	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
+	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0},
+	{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 4, 6, 7, 9)}, 0},
+	{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 4, 6, 9, 10)}, 1},
+	{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 6, 10, 10)}, 2}
+};
+
+/* for DTIM period > IWL_DTIM_RANGE_1_MAX */
+/* DTIM 11 - */
+static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = {
+	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
+	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
+	{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
+	{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
+	{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
+};
+
+/* advance power management */
+/* DTIM 0 - 2 */
+static const struct iwl_power_vec_entry apm_range_0[IWL_POWER_NUM] = {
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2}
+};
+
+
+/* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */
+/* DTIM 3 - 10 */
+static const struct iwl_power_vec_entry apm_range_1[IWL_POWER_NUM] = {
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 6, 8, 0xFF), 0}, 2}
+};
+
+/* for DTIM period > IWL_DTIM_RANGE_1_MAX */
+/* DTIM 11 - */
+static const struct iwl_power_vec_entry apm_range_2[IWL_POWER_NUM] = {
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2}
+};
+
+static void iwl_static_sleep_cmd(struct iwl_priv *priv,
+				 struct iwl_powertable_cmd *cmd,
+				 enum iwl_power_level lvl, int period)
+{
+	const struct iwl_power_vec_entry *table;
+	int max_sleep[IWL_POWER_VEC_SIZE] = { 0 };
+	int i;
+	u8 skip;
+	u32 slp_itrvl;
+
+	if (priv->cfg->adv_pm) {
+		table = apm_range_2;
+		if (period <= IWL_DTIM_RANGE_1_MAX)
+			table = apm_range_1;
+		if (period <= IWL_DTIM_RANGE_0_MAX)
+			table = apm_range_0;
+	} else {
+		table = range_2;
+		if (period <= IWL_DTIM_RANGE_1_MAX)
+			table = range_1;
+		if (period <= IWL_DTIM_RANGE_0_MAX)
+			table = range_0;
+	}
+
+	if (WARN_ON(lvl < 0 || lvl >= IWL_POWER_NUM))
+		memset(cmd, 0, sizeof(*cmd));
+	else
+		*cmd = table[lvl].cmd;
+
+	if (period == 0) {
+		skip = 0;
+		period = 1;
+		for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
+			max_sleep[i] =  1;
+
+	} else {
+		skip = table[lvl].no_dtim;
+		for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
+			max_sleep[i] = le32_to_cpu(cmd->sleep_interval[i]);
+		max_sleep[IWL_POWER_VEC_SIZE - 1] = skip + 1;
+	}
+
+	slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
+	/* figure out the listen interval based on dtim period and skip */
+	if (slp_itrvl == 0xFF)
+		cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
+			cpu_to_le32(period * (skip + 1));
+
+	slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
+	if (slp_itrvl > period)
+		cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
+			cpu_to_le32((slp_itrvl / period) * period);
+
+	if (skip)
+		cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK;
+	else
+		cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK;
+
+	if (priv->cfg->base_params->shadow_reg_enable)
+		cmd->flags |= IWL_POWER_SHADOW_REG_ENA;
+	else
+		cmd->flags &= ~IWL_POWER_SHADOW_REG_ENA;
+
+	if (iwl_advanced_bt_coexist(priv)) {
+		if (!priv->cfg->bt_params->bt_sco_disable)
+			cmd->flags |= IWL_POWER_BT_SCO_ENA;
+		else
+			cmd->flags &= ~IWL_POWER_BT_SCO_ENA;
+	}
+
+
+	slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
+	if (slp_itrvl > IWL_CONN_MAX_LISTEN_INTERVAL)
+		cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
+			cpu_to_le32(IWL_CONN_MAX_LISTEN_INTERVAL);
+
+	/* enforce max sleep interval */
+	for (i = IWL_POWER_VEC_SIZE - 1; i >= 0 ; i--) {
+		if (le32_to_cpu(cmd->sleep_interval[i]) >
+		    (max_sleep[i] * period))
+			cmd->sleep_interval[i] =
+				cpu_to_le32(max_sleep[i] * period);
+		if (i != (IWL_POWER_VEC_SIZE - 1)) {
+			if (le32_to_cpu(cmd->sleep_interval[i]) >
+			    le32_to_cpu(cmd->sleep_interval[i+1]))
+				cmd->sleep_interval[i] =
+					cmd->sleep_interval[i+1];
+		}
+	}
+
+	if (priv->power_data.bus_pm)
+		cmd->flags |= IWL_POWER_PCI_PM_MSK;
+	else
+		cmd->flags &= ~IWL_POWER_PCI_PM_MSK;
+
+	IWL_DEBUG_POWER(priv, "numSkipDtim = %u, dtimPeriod = %d\n",
+			skip, period);
+	/* The power level here is 0-4 (used as array index), but user expects
+	to see 1-5 (according to spec). */
+	IWL_DEBUG_POWER(priv, "Sleep command for index %d\n", lvl + 1);
+}
+
+static void iwl_power_sleep_cam_cmd(struct iwl_priv *priv,
+				    struct iwl_powertable_cmd *cmd)
+{
+	memset(cmd, 0, sizeof(*cmd));
+
+	if (priv->power_data.bus_pm)
+		cmd->flags |= IWL_POWER_PCI_PM_MSK;
+
+	IWL_DEBUG_POWER(priv, "Sleep command for CAM\n");
+}
+
+static int iwl_set_power(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd)
+{
+	IWL_DEBUG_POWER(priv, "Sending power/sleep command\n");
+	IWL_DEBUG_POWER(priv, "Flags value = 0x%08X\n", cmd->flags);
+	IWL_DEBUG_POWER(priv, "Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout));
+	IWL_DEBUG_POWER(priv, "Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout));
+	IWL_DEBUG_POWER(priv, "Sleep interval vector = { %d , %d , %d , %d , %d }\n",
+			le32_to_cpu(cmd->sleep_interval[0]),
+			le32_to_cpu(cmd->sleep_interval[1]),
+			le32_to_cpu(cmd->sleep_interval[2]),
+			le32_to_cpu(cmd->sleep_interval[3]),
+			le32_to_cpu(cmd->sleep_interval[4]));
+
+	return iwl_dvm_send_cmd_pdu(priv, POWER_TABLE_CMD, CMD_SYNC,
+				sizeof(struct iwl_powertable_cmd), cmd);
+}
+
+static void iwl_power_build_cmd(struct iwl_priv *priv,
+				struct iwl_powertable_cmd *cmd)
+{
+	bool enabled = priv->hw->conf.flags & IEEE80211_CONF_PS;
+	int dtimper;
+
+	dtimper = priv->hw->conf.ps_dtim_period ?: 1;
+
+	if (priv->wowlan)
+		iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, dtimper);
+	else if (!priv->cfg->base_params->no_idle_support &&
+		 priv->hw->conf.flags & IEEE80211_CONF_IDLE)
+		iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, 20);
+	else if (iwl_tt_is_low_power_state(priv)) {
+		/* in thermal throttling low power state */
+		iwl_static_sleep_cmd(priv, cmd,
+		    iwl_tt_current_power_mode(priv), dtimper);
+	} else if (!enabled)
+		iwl_power_sleep_cam_cmd(priv, cmd);
+	else if (priv->power_data.debug_sleep_level_override >= 0)
+		iwl_static_sleep_cmd(priv, cmd,
+				     priv->power_data.debug_sleep_level_override,
+				     dtimper);
+	else {
+		/* Note that the user parameter is 1-5 (according to spec),
+		but we pass 0-4 because it acts as an array index. */
+		if (iwlwifi_mod_params.power_level > IWL_POWER_INDEX_1 &&
+		    iwlwifi_mod_params.power_level <= IWL_POWER_NUM)
+			iwl_static_sleep_cmd(priv, cmd,
+				iwlwifi_mod_params.power_level - 1, dtimper);
+		else
+			iwl_static_sleep_cmd(priv, cmd,
+				IWL_POWER_INDEX_1, dtimper);
+	}
+}
+
+int iwl_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd,
+		       bool force)
+{
+	int ret;
+	bool update_chains;
+
+	lockdep_assert_held(&priv->mutex);
+
+	/* Don't update the RX chain when chain noise calibration is running */
+	update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE ||
+			priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE;
+
+	if (!memcmp(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd)) && !force)
+		return 0;
+
+	if (!iwl_is_ready_rf(priv))
+		return -EIO;
+
+	/* scan complete use sleep_power_next, need to be updated */
+	memcpy(&priv->power_data.sleep_cmd_next, cmd, sizeof(*cmd));
+	if (test_bit(STATUS_SCANNING, &priv->status) && !force) {
+		IWL_DEBUG_INFO(priv, "Defer power set mode while scanning\n");
+		return 0;
+	}
+
+	if (cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK)
+		iwl_dvm_set_pmi(priv, true);
+
+	ret = iwl_set_power(priv, cmd);
+	if (!ret) {
+		if (!(cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK))
+			iwl_dvm_set_pmi(priv, false);
+
+		if (update_chains)
+			iwl_update_chain_flags(priv);
+		else
+			IWL_DEBUG_POWER(priv,
+					"Cannot update the power, chain noise "
+					"calibration running: %d\n",
+					priv->chain_noise_data.state);
+
+		memcpy(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd));
+	} else
+		IWL_ERR(priv, "set power fail, ret = %d", ret);
+
+	return ret;
+}
+
+int iwl_power_update_mode(struct iwl_priv *priv, bool force)
+{
+	struct iwl_powertable_cmd cmd;
+
+	iwl_power_build_cmd(priv, &cmd);
+	return iwl_power_set_mode(priv, &cmd, force);
+}
+
+/* initialize to default */
+void iwl_power_initialize(struct iwl_priv *priv)
+{
+	priv->power_data.bus_pm = priv->trans->pm_support;
+
+	priv->power_data.debug_sleep_level_override = -1;
+
+	memset(&priv->power_data.sleep_cmd, 0,
+		sizeof(priv->power_data.sleep_cmd));
+}
diff --git a/drivers/net/wireless/iwlwifi/dvm/power.h b/drivers/net/wireless/iwlwifi/dvm/power.h
new file mode 100644
index 00000000000..a2cee7f0484
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/power.h
@@ -0,0 +1,47 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are derived from the ipw3945 project, as well
+ * as portions of the ieee80211 subsystem header files.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *****************************************************************************/
+#ifndef __iwl_power_setting_h__
+#define __iwl_power_setting_h__
+
+#include "commands.h"
+
+struct iwl_power_mgr {
+	struct iwl_powertable_cmd sleep_cmd;
+	struct iwl_powertable_cmd sleep_cmd_next;
+	int debug_sleep_level_override;
+	bool bus_pm;
+};
+
+int iwl_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd,
+		       bool force);
+int iwl_power_update_mode(struct iwl_priv *priv, bool force);
+void iwl_power_initialize(struct iwl_priv *priv);
+
+extern bool no_sleep_autoadjust;
+
+#endif  /* __iwl_power_setting_h__ */
diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.c b/drivers/net/wireless/iwlwifi/dvm/rs.c
new file mode 100644
index 00000000000..6fddd2785e6
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/rs.c
@@ -0,0 +1,3367 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2005 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <net/mac80211.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+
+#include <linux/workqueue.h>
+
+#include "dev.h"
+#include "agn.h"
+
+#define RS_NAME "iwl-agn-rs"
+
+#define NUM_TRY_BEFORE_ANT_TOGGLE 1
+#define IWL_NUMBER_TRY      1
+#define IWL_HT_NUMBER_TRY   3
+
+#define IWL_RATE_MAX_WINDOW		62	/* # tx in history window */
+#define IWL_RATE_MIN_FAILURE_TH		6	/* min failures to calc tpt */
+#define IWL_RATE_MIN_SUCCESS_TH		8	/* min successes to calc tpt */
+
+/* max allowed rate miss before sync LQ cmd */
+#define IWL_MISSED_RATE_MAX		15
+/* max time to accum history 2 seconds */
+#define IWL_RATE_SCALE_FLUSH_INTVL   (3*HZ)
+
+static u8 rs_ht_to_legacy[] = {
+	IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX,
+	IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX,
+	IWL_RATE_6M_INDEX,
+	IWL_RATE_6M_INDEX, IWL_RATE_9M_INDEX,
+	IWL_RATE_12M_INDEX, IWL_RATE_18M_INDEX,
+	IWL_RATE_24M_INDEX, IWL_RATE_36M_INDEX,
+	IWL_RATE_48M_INDEX, IWL_RATE_54M_INDEX
+};
+
+static const u8 ant_toggle_lookup[] = {
+	/*ANT_NONE -> */ ANT_NONE,
+	/*ANT_A    -> */ ANT_B,
+	/*ANT_B    -> */ ANT_C,
+	/*ANT_AB   -> */ ANT_BC,
+	/*ANT_C    -> */ ANT_A,
+	/*ANT_AC   -> */ ANT_AB,
+	/*ANT_BC   -> */ ANT_AC,
+	/*ANT_ABC  -> */ ANT_ABC,
+};
+
+#define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np)    \
+	[IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP,      \
+				    IWL_RATE_SISO_##s##M_PLCP, \
+				    IWL_RATE_MIMO2_##s##M_PLCP,\
+				    IWL_RATE_MIMO3_##s##M_PLCP,\
+				    IWL_RATE_##r##M_IEEE,      \
+				    IWL_RATE_##ip##M_INDEX,    \
+				    IWL_RATE_##in##M_INDEX,    \
+				    IWL_RATE_##rp##M_INDEX,    \
+				    IWL_RATE_##rn##M_INDEX,    \
+				    IWL_RATE_##pp##M_INDEX,    \
+				    IWL_RATE_##np##M_INDEX }
+
+/*
+ * Parameter order:
+ *   rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
+ *
+ * If there isn't a valid next or previous rate then INV is used which
+ * maps to IWL_RATE_INVALID
+ *
+ */
+const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT] = {
+	IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2),    /*  1mbps */
+	IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5),          /*  2mbps */
+	IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11),        /*5.5mbps */
+	IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18),      /* 11mbps */
+	IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11),        /*  6mbps */
+	IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11),       /*  9mbps */
+	IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18),   /* 12mbps */
+	IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24),   /* 18mbps */
+	IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36),   /* 24mbps */
+	IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48),   /* 36mbps */
+	IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54),   /* 48mbps */
+	IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */
+	IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */
+	/* FIXME:RS:          ^^    should be INV (legacy) */
+};
+
+static inline u8 rs_extract_rate(u32 rate_n_flags)
+{
+	return (u8)(rate_n_flags & RATE_MCS_RATE_MSK);
+}
+
+static int iwl_hwrate_to_plcp_idx(u32 rate_n_flags)
+{
+	int idx = 0;
+
+	/* HT rate format */
+	if (rate_n_flags & RATE_MCS_HT_MSK) {
+		idx = rs_extract_rate(rate_n_flags);
+
+		if (idx >= IWL_RATE_MIMO3_6M_PLCP)
+			idx = idx - IWL_RATE_MIMO3_6M_PLCP;
+		else if (idx >= IWL_RATE_MIMO2_6M_PLCP)
+			idx = idx - IWL_RATE_MIMO2_6M_PLCP;
+
+		idx += IWL_FIRST_OFDM_RATE;
+		/* skip 9M not supported in ht*/
+		if (idx >= IWL_RATE_9M_INDEX)
+			idx += 1;
+		if ((idx >= IWL_FIRST_OFDM_RATE) && (idx <= IWL_LAST_OFDM_RATE))
+			return idx;
+
+	/* legacy rate format, search for match in table */
+	} else {
+		for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++)
+			if (iwl_rates[idx].plcp ==
+					rs_extract_rate(rate_n_flags))
+				return idx;
+	}
+
+	return -1;
+}
+
+static void rs_rate_scale_perform(struct iwl_priv *priv,
+				   struct sk_buff *skb,
+				   struct ieee80211_sta *sta,
+				   struct iwl_lq_sta *lq_sta);
+static void rs_fill_link_cmd(struct iwl_priv *priv,
+			     struct iwl_lq_sta *lq_sta, u32 rate_n_flags);
+static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search);
+
+
+#ifdef CONFIG_MAC80211_DEBUGFS
+static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
+			     u32 *rate_n_flags, int index);
+#else
+static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
+			     u32 *rate_n_flags, int index)
+{}
+#endif
+
+/**
+ * The following tables contain the expected throughput metrics for all rates
+ *
+ *	1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits
+ *
+ * where invalid entries are zeros.
+ *
+ * CCK rates are only valid in legacy table and will only be used in G
+ * (2.4 GHz) band.
+ */
+
+static s32 expected_tpt_legacy[IWL_RATE_COUNT] = {
+	7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0
+};
+
+static s32 expected_tpt_siso20MHz[4][IWL_RATE_COUNT] = {
+	{0, 0, 0, 0, 42, 0,  76, 102, 124, 159, 183, 193, 202}, /* Norm */
+	{0, 0, 0, 0, 46, 0,  82, 110, 132, 168, 192, 202, 210}, /* SGI */
+	{0, 0, 0, 0, 47, 0,  91, 133, 171, 242, 305, 334, 362}, /* AGG */
+	{0, 0, 0, 0, 52, 0, 101, 145, 187, 264, 330, 361, 390}, /* AGG+SGI */
+};
+
+static s32 expected_tpt_siso40MHz[4][IWL_RATE_COUNT] = {
+	{0, 0, 0, 0,  77, 0, 127, 160, 184, 220, 242, 250, 257}, /* Norm */
+	{0, 0, 0, 0,  83, 0, 135, 169, 193, 229, 250, 257, 264}, /* SGI */
+	{0, 0, 0, 0,  94, 0, 177, 249, 313, 423, 512, 550, 586}, /* AGG */
+	{0, 0, 0, 0, 104, 0, 193, 270, 338, 454, 545, 584, 620}, /* AGG+SGI */
+};
+
+static s32 expected_tpt_mimo2_20MHz[4][IWL_RATE_COUNT] = {
+	{0, 0, 0, 0,  74, 0, 123, 155, 179, 214, 236, 244, 251}, /* Norm */
+	{0, 0, 0, 0,  81, 0, 131, 164, 188, 223, 243, 251, 257}, /* SGI */
+	{0, 0, 0, 0,  89, 0, 167, 235, 296, 402, 488, 526, 560}, /* AGG */
+	{0, 0, 0, 0,  97, 0, 182, 255, 320, 431, 520, 558, 593}, /* AGG+SGI*/
+};
+
+static s32 expected_tpt_mimo2_40MHz[4][IWL_RATE_COUNT] = {
+	{0, 0, 0, 0, 123, 0, 182, 214, 235, 264, 279, 285, 289}, /* Norm */
+	{0, 0, 0, 0, 131, 0, 191, 222, 242, 270, 284, 289, 293}, /* SGI */
+	{0, 0, 0, 0, 171, 0, 305, 410, 496, 634, 731, 771, 805}, /* AGG */
+	{0, 0, 0, 0, 186, 0, 329, 439, 527, 667, 764, 803, 838}, /* AGG+SGI */
+};
+
+static s32 expected_tpt_mimo3_20MHz[4][IWL_RATE_COUNT] = {
+	{0, 0, 0, 0,  99, 0, 153, 186, 208, 239, 256, 263, 268}, /* Norm */
+	{0, 0, 0, 0, 106, 0, 162, 194, 215, 246, 262, 268, 273}, /* SGI */
+	{0, 0, 0, 0, 134, 0, 249, 346, 431, 574, 685, 732, 775}, /* AGG */
+	{0, 0, 0, 0, 148, 0, 272, 376, 465, 614, 727, 775, 818}, /* AGG+SGI */
+};
+
+static s32 expected_tpt_mimo3_40MHz[4][IWL_RATE_COUNT] = {
+	{0, 0, 0, 0, 152, 0, 211, 239, 255, 279,  290,  294,  297}, /* Norm */
+	{0, 0, 0, 0, 160, 0, 219, 245, 261, 284,  294,  297,  300}, /* SGI */
+	{0, 0, 0, 0, 254, 0, 443, 584, 695, 868,  984, 1030, 1070}, /* AGG */
+	{0, 0, 0, 0, 277, 0, 478, 624, 737, 911, 1026, 1070, 1109}, /* AGG+SGI */
+};
+
+/* mbps, mcs */
+static const struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = {
+	{  "1", "BPSK DSSS"},
+	{  "2", "QPSK DSSS"},
+	{"5.5", "BPSK CCK"},
+	{ "11", "QPSK CCK"},
+	{  "6", "BPSK 1/2"},
+	{  "9", "BPSK 1/2"},
+	{ "12", "QPSK 1/2"},
+	{ "18", "QPSK 3/4"},
+	{ "24", "16QAM 1/2"},
+	{ "36", "16QAM 3/4"},
+	{ "48", "64QAM 2/3"},
+	{ "54", "64QAM 3/4"},
+	{ "60", "64QAM 5/6"},
+};
+
+#define MCS_INDEX_PER_STREAM	(8)
+
+static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window)
+{
+	window->data = 0;
+	window->success_counter = 0;
+	window->success_ratio = IWL_INVALID_VALUE;
+	window->counter = 0;
+	window->average_tpt = IWL_INVALID_VALUE;
+	window->stamp = 0;
+}
+
+static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type)
+{
+	return (ant_type & valid_antenna) == ant_type;
+}
+
+/*
+ *	removes the old data from the statistics. All data that is older than
+ *	TID_MAX_TIME_DIFF, will be deleted.
+ */
+static void rs_tl_rm_old_stats(struct iwl_traffic_load *tl, u32 curr_time)
+{
+	/* The oldest age we want to keep */
+	u32 oldest_time = curr_time - TID_MAX_TIME_DIFF;
+
+	while (tl->queue_count &&
+	       (tl->time_stamp < oldest_time)) {
+		tl->total -= tl->packet_count[tl->head];
+		tl->packet_count[tl->head] = 0;
+		tl->time_stamp += TID_QUEUE_CELL_SPACING;
+		tl->queue_count--;
+		tl->head++;
+		if (tl->head >= TID_QUEUE_MAX_SIZE)
+			tl->head = 0;
+	}
+}
+
+/*
+ *	increment traffic load value for tid and also remove
+ *	any old values if passed the certain time period
+ */
+static u8 rs_tl_add_packet(struct iwl_lq_sta *lq_data,
+			   struct ieee80211_hdr *hdr)
+{
+	u32 curr_time = jiffies_to_msecs(jiffies);
+	u32 time_diff;
+	s32 index;
+	struct iwl_traffic_load *tl = NULL;
+	u8 tid;
+
+	if (ieee80211_is_data_qos(hdr->frame_control)) {
+		u8 *qc = ieee80211_get_qos_ctl(hdr);
+		tid = qc[0] & 0xf;
+	} else
+		return IWL_MAX_TID_COUNT;
+
+	if (unlikely(tid >= IWL_MAX_TID_COUNT))
+		return IWL_MAX_TID_COUNT;
+
+	tl = &lq_data->load[tid];
+
+	curr_time -= curr_time % TID_ROUND_VALUE;
+
+	/* Happens only for the first packet. Initialize the data */
+	if (!(tl->queue_count)) {
+		tl->total = 1;
+		tl->time_stamp = curr_time;
+		tl->queue_count = 1;
+		tl->head = 0;
+		tl->packet_count[0] = 1;
+		return IWL_MAX_TID_COUNT;
+	}
+
+	time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
+	index = time_diff / TID_QUEUE_CELL_SPACING;
+
+	/* The history is too long: remove data that is older than */
+	/* TID_MAX_TIME_DIFF */
+	if (index >= TID_QUEUE_MAX_SIZE)
+		rs_tl_rm_old_stats(tl, curr_time);
+
+	index = (tl->head + index) % TID_QUEUE_MAX_SIZE;
+	tl->packet_count[index] = tl->packet_count[index] + 1;
+	tl->total = tl->total + 1;
+
+	if ((index + 1) > tl->queue_count)
+		tl->queue_count = index + 1;
+
+	return tid;
+}
+
+#ifdef CONFIG_MAC80211_DEBUGFS
+/**
+ * Program the device to use fixed rate for frame transmit
+ * This is for debugging/testing only
+ * once the device start use fixed rate, we need to reload the module
+ * to being back the normal operation.
+ */
+static void rs_program_fix_rate(struct iwl_priv *priv,
+				struct iwl_lq_sta *lq_sta)
+{
+	struct iwl_station_priv *sta_priv =
+		container_of(lq_sta, struct iwl_station_priv, lq_sta);
+	struct iwl_rxon_context *ctx = sta_priv->ctx;
+
+	lq_sta->active_legacy_rate = 0x0FFF;	/* 1 - 54 MBits, includes CCK */
+	lq_sta->active_siso_rate   = 0x1FD0;	/* 6 - 60 MBits, no 9, no CCK */
+	lq_sta->active_mimo2_rate  = 0x1FD0;	/* 6 - 60 MBits, no 9, no CCK */
+	lq_sta->active_mimo3_rate  = 0x1FD0;	/* 6 - 60 MBits, no 9, no CCK */
+
+#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
+	/* testmode has higher priority to overwirte the fixed rate */
+	if (priv->tm_fixed_rate)
+		lq_sta->dbg_fixed_rate = priv->tm_fixed_rate;
+#endif
+
+	IWL_DEBUG_RATE(priv, "sta_id %d rate 0x%X\n",
+		lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate);
+
+	if (lq_sta->dbg_fixed_rate) {
+		rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate);
+		iwl_send_lq_cmd(lq_sta->drv, ctx, &lq_sta->lq, CMD_ASYNC,
+				false);
+	}
+}
+#endif
+
+/*
+	get the traffic load value for tid
+*/
+static u32 rs_tl_get_load(struct iwl_lq_sta *lq_data, u8 tid)
+{
+	u32 curr_time = jiffies_to_msecs(jiffies);
+	u32 time_diff;
+	s32 index;
+	struct iwl_traffic_load *tl = NULL;
+
+	if (tid >= IWL_MAX_TID_COUNT)
+		return 0;
+
+	tl = &(lq_data->load[tid]);
+
+	curr_time -= curr_time % TID_ROUND_VALUE;
+
+	if (!(tl->queue_count))
+		return 0;
+
+	time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
+	index = time_diff / TID_QUEUE_CELL_SPACING;
+
+	/* The history is too long: remove data that is older than */
+	/* TID_MAX_TIME_DIFF */
+	if (index >= TID_QUEUE_MAX_SIZE)
+		rs_tl_rm_old_stats(tl, curr_time);
+
+	return tl->total;
+}
+
+static int rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv,
+				      struct iwl_lq_sta *lq_data, u8 tid,
+				      struct ieee80211_sta *sta)
+{
+	int ret = -EAGAIN;
+	u32 load;
+
+	/*
+	 * Don't create TX aggregation sessions when in high
+	 * BT traffic, as they would just be disrupted by BT.
+	 */
+	if (priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) {
+		IWL_ERR(priv, "BT traffic (%d), no aggregation allowed\n",
+			priv->bt_traffic_load);
+		return ret;
+	}
+
+	load = rs_tl_get_load(lq_data, tid);
+
+	if ((iwlwifi_mod_params.auto_agg) || (load > IWL_AGG_LOAD_THRESHOLD)) {
+		IWL_DEBUG_HT(priv, "Starting Tx agg: STA: %pM tid: %d\n",
+				sta->addr, tid);
+		ret = ieee80211_start_tx_ba_session(sta, tid, 5000);
+		if (ret == -EAGAIN) {
+			/*
+			 * driver and mac80211 is out of sync
+			 * this might be cause by reloading firmware
+			 * stop the tx ba session here
+			 */
+			IWL_ERR(priv, "Fail start Tx agg on tid: %d\n",
+				tid);
+			ieee80211_stop_tx_ba_session(sta, tid);
+		}
+	} else {
+		IWL_DEBUG_HT(priv, "Aggregation not enabled for tid %d "
+			"because load = %u\n", tid, load);
+	}
+	return ret;
+}
+
+static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid,
+			      struct iwl_lq_sta *lq_data,
+			      struct ieee80211_sta *sta)
+{
+	if (tid < IWL_MAX_TID_COUNT)
+		rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta);
+	else
+		IWL_ERR(priv, "tid exceeds max TID count: %d/%d\n",
+			tid, IWL_MAX_TID_COUNT);
+}
+
+static inline int get_num_of_ant_from_rate(u32 rate_n_flags)
+{
+	return !!(rate_n_flags & RATE_MCS_ANT_A_MSK) +
+	       !!(rate_n_flags & RATE_MCS_ANT_B_MSK) +
+	       !!(rate_n_flags & RATE_MCS_ANT_C_MSK);
+}
+
+/*
+ * Static function to get the expected throughput from an iwl_scale_tbl_info
+ * that wraps a NULL pointer check
+ */
+static s32 get_expected_tpt(struct iwl_scale_tbl_info *tbl, int rs_index)
+{
+	if (tbl->expected_tpt)
+		return tbl->expected_tpt[rs_index];
+	return 0;
+}
+
+/**
+ * rs_collect_tx_data - Update the success/failure sliding window
+ *
+ * We keep a sliding window of the last 62 packets transmitted
+ * at this rate.  window->data contains the bitmask of successful
+ * packets.
+ */
+static int rs_collect_tx_data(struct iwl_scale_tbl_info *tbl,
+			      int scale_index, int attempts, int successes)
+{
+	struct iwl_rate_scale_data *window = NULL;
+	static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1));
+	s32 fail_count, tpt;
+
+	if (scale_index < 0 || scale_index >= IWL_RATE_COUNT)
+		return -EINVAL;
+
+	/* Select window for current tx bit rate */
+	window = &(tbl->win[scale_index]);
+
+	/* Get expected throughput */
+	tpt = get_expected_tpt(tbl, scale_index);
+
+	/*
+	 * Keep track of only the latest 62 tx frame attempts in this rate's
+	 * history window; anything older isn't really relevant any more.
+	 * If we have filled up the sliding window, drop the oldest attempt;
+	 * if the oldest attempt (highest bit in bitmap) shows "success",
+	 * subtract "1" from the success counter (this is the main reason
+	 * we keep these bitmaps!).
+	 */
+	while (attempts > 0) {
+		if (window->counter >= IWL_RATE_MAX_WINDOW) {
+
+			/* remove earliest */
+			window->counter = IWL_RATE_MAX_WINDOW - 1;
+
+			if (window->data & mask) {
+				window->data &= ~mask;
+				window->success_counter--;
+			}
+		}
+
+		/* Increment frames-attempted counter */
+		window->counter++;
+
+		/* Shift bitmap by one frame to throw away oldest history */
+		window->data <<= 1;
+
+		/* Mark the most recent #successes attempts as successful */
+		if (successes > 0) {
+			window->success_counter++;
+			window->data |= 0x1;
+			successes--;
+		}
+
+		attempts--;
+	}
+
+	/* Calculate current success ratio, avoid divide-by-0! */
+	if (window->counter > 0)
+		window->success_ratio = 128 * (100 * window->success_counter)
+					/ window->counter;
+	else
+		window->success_ratio = IWL_INVALID_VALUE;
+
+	fail_count = window->counter - window->success_counter;
+
+	/* Calculate average throughput, if we have enough history. */
+	if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) ||
+	    (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH))
+		window->average_tpt = (window->success_ratio * tpt + 64) / 128;
+	else
+		window->average_tpt = IWL_INVALID_VALUE;
+
+	/* Tag this window as having been updated */
+	window->stamp = jiffies;
+
+	return 0;
+}
+
+/*
+ * Fill uCode API rate_n_flags field, based on "search" or "active" table.
+ */
+/* FIXME:RS:remove this function and put the flags statically in the table */
+static u32 rate_n_flags_from_tbl(struct iwl_priv *priv,
+				 struct iwl_scale_tbl_info *tbl,
+				 int index, u8 use_green)
+{
+	u32 rate_n_flags = 0;
+
+	if (is_legacy(tbl->lq_type)) {
+		rate_n_flags = iwl_rates[index].plcp;
+		if (index >= IWL_FIRST_CCK_RATE && index <= IWL_LAST_CCK_RATE)
+			rate_n_flags |= RATE_MCS_CCK_MSK;
+
+	} else if (is_Ht(tbl->lq_type)) {
+		if (index > IWL_LAST_OFDM_RATE) {
+			IWL_ERR(priv, "Invalid HT rate index %d\n", index);
+			index = IWL_LAST_OFDM_RATE;
+		}
+		rate_n_flags = RATE_MCS_HT_MSK;
+
+		if (is_siso(tbl->lq_type))
+			rate_n_flags |=	iwl_rates[index].plcp_siso;
+		else if (is_mimo2(tbl->lq_type))
+			rate_n_flags |=	iwl_rates[index].plcp_mimo2;
+		else
+			rate_n_flags |=	iwl_rates[index].plcp_mimo3;
+	} else {
+		IWL_ERR(priv, "Invalid tbl->lq_type %d\n", tbl->lq_type);
+	}
+
+	rate_n_flags |= ((tbl->ant_type << RATE_MCS_ANT_POS) &
+						     RATE_MCS_ANT_ABC_MSK);
+
+	if (is_Ht(tbl->lq_type)) {
+		if (tbl->is_ht40) {
+			if (tbl->is_dup)
+				rate_n_flags |= RATE_MCS_DUP_MSK;
+			else
+				rate_n_flags |= RATE_MCS_HT40_MSK;
+		}
+		if (tbl->is_SGI)
+			rate_n_flags |= RATE_MCS_SGI_MSK;
+
+		if (use_green) {
+			rate_n_flags |= RATE_MCS_GF_MSK;
+			if (is_siso(tbl->lq_type) && tbl->is_SGI) {
+				rate_n_flags &= ~RATE_MCS_SGI_MSK;
+				IWL_ERR(priv, "GF was set with SGI:SISO\n");
+			}
+		}
+	}
+	return rate_n_flags;
+}
+
+/*
+ * Interpret uCode API's rate_n_flags format,
+ * fill "search" or "active" tx mode table.
+ */
+static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags,
+				    enum ieee80211_band band,
+				    struct iwl_scale_tbl_info *tbl,
+				    int *rate_idx)
+{
+	u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK);
+	u8 num_of_ant = get_num_of_ant_from_rate(rate_n_flags);
+	u8 mcs;
+
+	memset(tbl, 0, sizeof(struct iwl_scale_tbl_info));
+	*rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags);
+
+	if (*rate_idx  == IWL_RATE_INVALID) {
+		*rate_idx = -1;
+		return -EINVAL;
+	}
+	tbl->is_SGI = 0;	/* default legacy setup */
+	tbl->is_ht40 = 0;
+	tbl->is_dup = 0;
+	tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS);
+	tbl->lq_type = LQ_NONE;
+	tbl->max_search = IWL_MAX_SEARCH;
+
+	/* legacy rate format */
+	if (!(rate_n_flags & RATE_MCS_HT_MSK)) {
+		if (num_of_ant == 1) {
+			if (band == IEEE80211_BAND_5GHZ)
+				tbl->lq_type = LQ_A;
+			else
+				tbl->lq_type = LQ_G;
+		}
+	/* HT rate format */
+	} else {
+		if (rate_n_flags & RATE_MCS_SGI_MSK)
+			tbl->is_SGI = 1;
+
+		if ((rate_n_flags & RATE_MCS_HT40_MSK) ||
+		    (rate_n_flags & RATE_MCS_DUP_MSK))
+			tbl->is_ht40 = 1;
+
+		if (rate_n_flags & RATE_MCS_DUP_MSK)
+			tbl->is_dup = 1;
+
+		mcs = rs_extract_rate(rate_n_flags);
+
+		/* SISO */
+		if (mcs <= IWL_RATE_SISO_60M_PLCP) {
+			if (num_of_ant == 1)
+				tbl->lq_type = LQ_SISO; /*else NONE*/
+		/* MIMO2 */
+		} else if (mcs <= IWL_RATE_MIMO2_60M_PLCP) {
+			if (num_of_ant == 2)
+				tbl->lq_type = LQ_MIMO2;
+		/* MIMO3 */
+		} else {
+			if (num_of_ant == 3) {
+				tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH;
+				tbl->lq_type = LQ_MIMO3;
+			}
+		}
+	}
+	return 0;
+}
+
+/* switch to another antenna/antennas and return 1 */
+/* if no other valid antenna found, return 0 */
+static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags,
+			     struct iwl_scale_tbl_info *tbl)
+{
+	u8 new_ant_type;
+
+	if (!tbl->ant_type || tbl->ant_type > ANT_ABC)
+		return 0;
+
+	if (!rs_is_valid_ant(valid_ant, tbl->ant_type))
+		return 0;
+
+	new_ant_type = ant_toggle_lookup[tbl->ant_type];
+
+	while ((new_ant_type != tbl->ant_type) &&
+	       !rs_is_valid_ant(valid_ant, new_ant_type))
+		new_ant_type = ant_toggle_lookup[new_ant_type];
+
+	if (new_ant_type == tbl->ant_type)
+		return 0;
+
+	tbl->ant_type = new_ant_type;
+	*rate_n_flags &= ~RATE_MCS_ANT_ABC_MSK;
+	*rate_n_flags |= new_ant_type << RATE_MCS_ANT_POS;
+	return 1;
+}
+
+/**
+ * Green-field mode is valid if the station supports it and
+ * there are no non-GF stations present in the BSS.
+ */
+static bool rs_use_green(struct ieee80211_sta *sta)
+{
+	struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
+	struct iwl_rxon_context *ctx = sta_priv->ctx;
+
+	return (sta->ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD) &&
+		!(ctx->ht.non_gf_sta_present);
+}
+
+/**
+ * rs_get_supported_rates - get the available rates
+ *
+ * if management frame or broadcast frame only return
+ * basic available rates.
+ *
+ */
+static u16 rs_get_supported_rates(struct iwl_lq_sta *lq_sta,
+				  struct ieee80211_hdr *hdr,
+				  enum iwl_table_type rate_type)
+{
+	if (is_legacy(rate_type)) {
+		return lq_sta->active_legacy_rate;
+	} else {
+		if (is_siso(rate_type))
+			return lq_sta->active_siso_rate;
+		else if (is_mimo2(rate_type))
+			return lq_sta->active_mimo2_rate;
+		else
+			return lq_sta->active_mimo3_rate;
+	}
+}
+
+static u16 rs_get_adjacent_rate(struct iwl_priv *priv, u8 index, u16 rate_mask,
+				int rate_type)
+{
+	u8 high = IWL_RATE_INVALID;
+	u8 low = IWL_RATE_INVALID;
+
+	/* 802.11A or ht walks to the next literal adjacent rate in
+	 * the rate table */
+	if (is_a_band(rate_type) || !is_legacy(rate_type)) {
+		int i;
+		u32 mask;
+
+		/* Find the previous rate that is in the rate mask */
+		i = index - 1;
+		for (mask = (1 << i); i >= 0; i--, mask >>= 1) {
+			if (rate_mask & mask) {
+				low = i;
+				break;
+			}
+		}
+
+		/* Find the next rate that is in the rate mask */
+		i = index + 1;
+		for (mask = (1 << i); i < IWL_RATE_COUNT; i++, mask <<= 1) {
+			if (rate_mask & mask) {
+				high = i;
+				break;
+			}
+		}
+
+		return (high << 8) | low;
+	}
+
+	low = index;
+	while (low != IWL_RATE_INVALID) {
+		low = iwl_rates[low].prev_rs;
+		if (low == IWL_RATE_INVALID)
+			break;
+		if (rate_mask & (1 << low))
+			break;
+		IWL_DEBUG_RATE(priv, "Skipping masked lower rate: %d\n", low);
+	}
+
+	high = index;
+	while (high != IWL_RATE_INVALID) {
+		high = iwl_rates[high].next_rs;
+		if (high == IWL_RATE_INVALID)
+			break;
+		if (rate_mask & (1 << high))
+			break;
+		IWL_DEBUG_RATE(priv, "Skipping masked higher rate: %d\n", high);
+	}
+
+	return (high << 8) | low;
+}
+
+static u32 rs_get_lower_rate(struct iwl_lq_sta *lq_sta,
+			     struct iwl_scale_tbl_info *tbl,
+			     u8 scale_index, u8 ht_possible)
+{
+	s32 low;
+	u16 rate_mask;
+	u16 high_low;
+	u8 switch_to_legacy = 0;
+	u8 is_green = lq_sta->is_green;
+	struct iwl_priv *priv = lq_sta->drv;
+
+	/* check if we need to switch from HT to legacy rates.
+	 * assumption is that mandatory rates (1Mbps or 6Mbps)
+	 * are always supported (spec demand) */
+	if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_index)) {
+		switch_to_legacy = 1;
+		scale_index = rs_ht_to_legacy[scale_index];
+		if (lq_sta->band == IEEE80211_BAND_5GHZ)
+			tbl->lq_type = LQ_A;
+		else
+			tbl->lq_type = LQ_G;
+
+		if (num_of_ant(tbl->ant_type) > 1)
+			tbl->ant_type =
+			    first_antenna(priv->eeprom_data->valid_tx_ant);
+
+		tbl->is_ht40 = 0;
+		tbl->is_SGI = 0;
+		tbl->max_search = IWL_MAX_SEARCH;
+	}
+
+	rate_mask = rs_get_supported_rates(lq_sta, NULL, tbl->lq_type);
+
+	/* Mask with station rate restriction */
+	if (is_legacy(tbl->lq_type)) {
+		/* supp_rates has no CCK bits in A mode */
+		if (lq_sta->band == IEEE80211_BAND_5GHZ)
+			rate_mask  = (u16)(rate_mask &
+			   (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE));
+		else
+			rate_mask = (u16)(rate_mask & lq_sta->supp_rates);
+	}
+
+	/* If we switched from HT to legacy, check current rate */
+	if (switch_to_legacy && (rate_mask & (1 << scale_index))) {
+		low = scale_index;
+		goto out;
+	}
+
+	high_low = rs_get_adjacent_rate(lq_sta->drv, scale_index, rate_mask,
+					tbl->lq_type);
+	low = high_low & 0xff;
+
+	if (low == IWL_RATE_INVALID)
+		low = scale_index;
+
+out:
+	return rate_n_flags_from_tbl(lq_sta->drv, tbl, low, is_green);
+}
+
+/*
+ * Simple function to compare two rate scale table types
+ */
+static bool table_type_matches(struct iwl_scale_tbl_info *a,
+			       struct iwl_scale_tbl_info *b)
+{
+	return (a->lq_type == b->lq_type) && (a->ant_type == b->ant_type) &&
+		(a->is_SGI == b->is_SGI);
+}
+
+static void rs_bt_update_lq(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
+			    struct iwl_lq_sta *lq_sta)
+{
+	struct iwl_scale_tbl_info *tbl;
+	bool full_concurrent = priv->bt_full_concurrent;
+
+	if (priv->bt_ant_couple_ok) {
+		/*
+		 * Is there a need to switch between
+		 * full concurrency and 3-wire?
+		 */
+		if (priv->bt_ci_compliance && priv->bt_ant_couple_ok)
+			full_concurrent = true;
+		else
+			full_concurrent = false;
+	}
+	if ((priv->bt_traffic_load != priv->last_bt_traffic_load) ||
+	    (priv->bt_full_concurrent != full_concurrent)) {
+		priv->bt_full_concurrent = full_concurrent;
+		priv->last_bt_traffic_load = priv->bt_traffic_load;
+
+		/* Update uCode's rate table. */
+		tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+		rs_fill_link_cmd(priv, lq_sta, tbl->current_rate);
+		iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false);
+
+		queue_work(priv->workqueue, &priv->bt_full_concurrency);
+	}
+}
+
+/*
+ * mac80211 sends us Tx status
+ */
+static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
+			 struct ieee80211_sta *sta, void *priv_sta,
+			 struct sk_buff *skb)
+{
+	int legacy_success;
+	int retries;
+	int rs_index, mac_index, i;
+	struct iwl_lq_sta *lq_sta = priv_sta;
+	struct iwl_link_quality_cmd *table;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	struct iwl_op_mode *op_mode = (struct iwl_op_mode *)priv_r;
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	enum mac80211_rate_control_flags mac_flags;
+	u32 tx_rate;
+	struct iwl_scale_tbl_info tbl_type;
+	struct iwl_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl;
+	struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
+	struct iwl_rxon_context *ctx = sta_priv->ctx;
+
+	IWL_DEBUG_RATE_LIMIT(priv, "get frame ack response, update rate scale window\n");
+
+	/* Treat uninitialized rate scaling data same as non-existing. */
+	if (!lq_sta) {
+		IWL_DEBUG_RATE(priv, "Station rate scaling not created yet.\n");
+		return;
+	} else if (!lq_sta->drv) {
+		IWL_DEBUG_RATE(priv, "Rate scaling not initialized yet.\n");
+		return;
+	}
+
+	if (!ieee80211_is_data(hdr->frame_control) ||
+	    info->flags & IEEE80211_TX_CTL_NO_ACK)
+		return;
+
+	/* This packet was aggregated but doesn't carry status info */
+	if ((info->flags & IEEE80211_TX_CTL_AMPDU) &&
+	    !(info->flags & IEEE80211_TX_STAT_AMPDU))
+		return;
+
+	/*
+	 * Ignore this Tx frame response if its initial rate doesn't match
+	 * that of latest Link Quality command.  There may be stragglers
+	 * from a previous Link Quality command, but we're no longer interested
+	 * in those; they're either from the "active" mode while we're trying
+	 * to check "search" mode, or a prior "search" mode after we've moved
+	 * to a new "search" mode (which might become the new "active" mode).
+	 */
+	table = &lq_sta->lq;
+	tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
+	rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index);
+	if (priv->band == IEEE80211_BAND_5GHZ)
+		rs_index -= IWL_FIRST_OFDM_RATE;
+	mac_flags = info->status.rates[0].flags;
+	mac_index = info->status.rates[0].idx;
+	/* For HT packets, map MCS to PLCP */
+	if (mac_flags & IEEE80211_TX_RC_MCS) {
+		mac_index &= RATE_MCS_CODE_MSK;	/* Remove # of streams */
+		if (mac_index >= (IWL_RATE_9M_INDEX - IWL_FIRST_OFDM_RATE))
+			mac_index++;
+		/*
+		 * mac80211 HT index is always zero-indexed; we need to move
+		 * HT OFDM rates after CCK rates in 2.4 GHz band
+		 */
+		if (priv->band == IEEE80211_BAND_2GHZ)
+			mac_index += IWL_FIRST_OFDM_RATE;
+	}
+	/* Here we actually compare this rate to the latest LQ command */
+	if ((mac_index < 0) ||
+	    (tbl_type.is_SGI != !!(mac_flags & IEEE80211_TX_RC_SHORT_GI)) ||
+	    (tbl_type.is_ht40 != !!(mac_flags & IEEE80211_TX_RC_40_MHZ_WIDTH)) ||
+	    (tbl_type.is_dup != !!(mac_flags & IEEE80211_TX_RC_DUP_DATA)) ||
+	    (tbl_type.ant_type != info->status.antenna) ||
+	    (!!(tx_rate & RATE_MCS_HT_MSK) != !!(mac_flags & IEEE80211_TX_RC_MCS)) ||
+	    (!!(tx_rate & RATE_MCS_GF_MSK) != !!(mac_flags & IEEE80211_TX_RC_GREEN_FIELD)) ||
+	    (rs_index != mac_index)) {
+		IWL_DEBUG_RATE(priv, "initial rate %d does not match %d (0x%x)\n", mac_index, rs_index, tx_rate);
+		/*
+		 * Since rates mis-match, the last LQ command may have failed.
+		 * After IWL_MISSED_RATE_MAX mis-matches, resync the uCode with
+		 * ... driver.
+		 */
+		lq_sta->missed_rate_counter++;
+		if (lq_sta->missed_rate_counter > IWL_MISSED_RATE_MAX) {
+			lq_sta->missed_rate_counter = 0;
+			iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false);
+		}
+		/* Regardless, ignore this status info for outdated rate */
+		return;
+	} else
+		/* Rate did match, so reset the missed_rate_counter */
+		lq_sta->missed_rate_counter = 0;
+
+	/* Figure out if rate scale algorithm is in active or search table */
+	if (table_type_matches(&tbl_type,
+				&(lq_sta->lq_info[lq_sta->active_tbl]))) {
+		curr_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+		other_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
+	} else if (table_type_matches(&tbl_type,
+				&lq_sta->lq_info[1 - lq_sta->active_tbl])) {
+		curr_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
+		other_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+	} else {
+		IWL_DEBUG_RATE(priv, "Neither active nor search matches tx rate\n");
+		tmp_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+		IWL_DEBUG_RATE(priv, "active- lq:%x, ant:%x, SGI:%d\n",
+			tmp_tbl->lq_type, tmp_tbl->ant_type, tmp_tbl->is_SGI);
+		tmp_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
+		IWL_DEBUG_RATE(priv, "search- lq:%x, ant:%x, SGI:%d\n",
+			tmp_tbl->lq_type, tmp_tbl->ant_type, tmp_tbl->is_SGI);
+		IWL_DEBUG_RATE(priv, "actual- lq:%x, ant:%x, SGI:%d\n",
+			tbl_type.lq_type, tbl_type.ant_type, tbl_type.is_SGI);
+		/*
+		 * no matching table found, let's by-pass the data collection
+		 * and continue to perform rate scale to find the rate table
+		 */
+		rs_stay_in_table(lq_sta, true);
+		goto done;
+	}
+
+	/*
+	 * Updating the frame history depends on whether packets were
+	 * aggregated.
+	 *
+	 * For aggregation, all packets were transmitted at the same rate, the
+	 * first index into rate scale table.
+	 */
+	if (info->flags & IEEE80211_TX_STAT_AMPDU) {
+		tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
+		rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type,
+				&rs_index);
+		rs_collect_tx_data(curr_tbl, rs_index,
+				   info->status.ampdu_len,
+				   info->status.ampdu_ack_len);
+
+		/* Update success/fail counts if not searching for new mode */
+		if (lq_sta->stay_in_tbl) {
+			lq_sta->total_success += info->status.ampdu_ack_len;
+			lq_sta->total_failed += (info->status.ampdu_len -
+					info->status.ampdu_ack_len);
+		}
+	} else {
+	/*
+	 * For legacy, update frame history with for each Tx retry.
+	 */
+		retries = info->status.rates[0].count - 1;
+		/* HW doesn't send more than 15 retries */
+		retries = min(retries, 15);
+
+		/* The last transmission may have been successful */
+		legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK);
+		/* Collect data for each rate used during failed TX attempts */
+		for (i = 0; i <= retries; ++i) {
+			tx_rate = le32_to_cpu(table->rs_table[i].rate_n_flags);
+			rs_get_tbl_info_from_mcs(tx_rate, priv->band,
+					&tbl_type, &rs_index);
+			/*
+			 * Only collect stats if retried rate is in the same RS
+			 * table as active/search.
+			 */
+			if (table_type_matches(&tbl_type, curr_tbl))
+				tmp_tbl = curr_tbl;
+			else if (table_type_matches(&tbl_type, other_tbl))
+				tmp_tbl = other_tbl;
+			else
+				continue;
+			rs_collect_tx_data(tmp_tbl, rs_index, 1,
+					   i < retries ? 0 : legacy_success);
+		}
+
+		/* Update success/fail counts if not searching for new mode */
+		if (lq_sta->stay_in_tbl) {
+			lq_sta->total_success += legacy_success;
+			lq_sta->total_failed += retries + (1 - legacy_success);
+		}
+	}
+	/* The last TX rate is cached in lq_sta; it's set in if/else above */
+	lq_sta->last_rate_n_flags = tx_rate;
+done:
+	/* See if there's a better rate or modulation mode to try. */
+	if (sta && sta->supp_rates[sband->band])
+		rs_rate_scale_perform(priv, skb, sta, lq_sta);
+
+#if defined(CONFIG_MAC80211_DEBUGFS) && defined(CONFIG_IWLWIFI_DEVICE_TESTMODE)
+	if ((priv->tm_fixed_rate) &&
+	    (priv->tm_fixed_rate != lq_sta->dbg_fixed_rate))
+		rs_program_fix_rate(priv, lq_sta);
+#endif
+	if (priv->cfg->bt_params && priv->cfg->bt_params->advanced_bt_coexist)
+		rs_bt_update_lq(priv, ctx, lq_sta);
+}
+
+/*
+ * Begin a period of staying with a selected modulation mode.
+ * Set "stay_in_tbl" flag to prevent any mode switches.
+ * Set frame tx success limits according to legacy vs. high-throughput,
+ * and reset overall (spanning all rates) tx success history statistics.
+ * These control how long we stay using same modulation mode before
+ * searching for a new mode.
+ */
+static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy,
+				 struct iwl_lq_sta *lq_sta)
+{
+	IWL_DEBUG_RATE(priv, "we are staying in the same table\n");
+	lq_sta->stay_in_tbl = 1;	/* only place this gets set */
+	if (is_legacy) {
+		lq_sta->table_count_limit = IWL_LEGACY_TABLE_COUNT;
+		lq_sta->max_failure_limit = IWL_LEGACY_FAILURE_LIMIT;
+		lq_sta->max_success_limit = IWL_LEGACY_SUCCESS_LIMIT;
+	} else {
+		lq_sta->table_count_limit = IWL_NONE_LEGACY_TABLE_COUNT;
+		lq_sta->max_failure_limit = IWL_NONE_LEGACY_FAILURE_LIMIT;
+		lq_sta->max_success_limit = IWL_NONE_LEGACY_SUCCESS_LIMIT;
+	}
+	lq_sta->table_count = 0;
+	lq_sta->total_failed = 0;
+	lq_sta->total_success = 0;
+	lq_sta->flush_timer = jiffies;
+	lq_sta->action_counter = 0;
+}
+
+/*
+ * Find correct throughput table for given mode of modulation
+ */
+static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta,
+				      struct iwl_scale_tbl_info *tbl)
+{
+	/* Used to choose among HT tables */
+	s32 (*ht_tbl_pointer)[IWL_RATE_COUNT];
+
+	/* Check for invalid LQ type */
+	if (WARN_ON_ONCE(!is_legacy(tbl->lq_type) && !is_Ht(tbl->lq_type))) {
+		tbl->expected_tpt = expected_tpt_legacy;
+		return;
+	}
+
+	/* Legacy rates have only one table */
+	if (is_legacy(tbl->lq_type)) {
+		tbl->expected_tpt = expected_tpt_legacy;
+		return;
+	}
+
+	/* Choose among many HT tables depending on number of streams
+	 * (SISO/MIMO2/MIMO3), channel width (20/40), SGI, and aggregation
+	 * status */
+	if (is_siso(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
+		ht_tbl_pointer = expected_tpt_siso20MHz;
+	else if (is_siso(tbl->lq_type))
+		ht_tbl_pointer = expected_tpt_siso40MHz;
+	else if (is_mimo2(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
+		ht_tbl_pointer = expected_tpt_mimo2_20MHz;
+	else if (is_mimo2(tbl->lq_type))
+		ht_tbl_pointer = expected_tpt_mimo2_40MHz;
+	else if (is_mimo3(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
+		ht_tbl_pointer = expected_tpt_mimo3_20MHz;
+	else /* if (is_mimo3(tbl->lq_type)) <-- must be true */
+		ht_tbl_pointer = expected_tpt_mimo3_40MHz;
+
+	if (!tbl->is_SGI && !lq_sta->is_agg)		/* Normal */
+		tbl->expected_tpt = ht_tbl_pointer[0];
+	else if (tbl->is_SGI && !lq_sta->is_agg)	/* SGI */
+		tbl->expected_tpt = ht_tbl_pointer[1];
+	else if (!tbl->is_SGI && lq_sta->is_agg)	/* AGG */
+		tbl->expected_tpt = ht_tbl_pointer[2];
+	else						/* AGG+SGI */
+		tbl->expected_tpt = ht_tbl_pointer[3];
+}
+
+/*
+ * Find starting rate for new "search" high-throughput mode of modulation.
+ * Goal is to find lowest expected rate (under perfect conditions) that is
+ * above the current measured throughput of "active" mode, to give new mode
+ * a fair chance to prove itself without too many challenges.
+ *
+ * This gets called when transitioning to more aggressive modulation
+ * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive
+ * (i.e. MIMO to SISO).  When moving to MIMO, bit rate will typically need
+ * to decrease to match "active" throughput.  When moving from MIMO to SISO,
+ * bit rate will typically need to increase, but not if performance was bad.
+ */
+static s32 rs_get_best_rate(struct iwl_priv *priv,
+			    struct iwl_lq_sta *lq_sta,
+			    struct iwl_scale_tbl_info *tbl,	/* "search" */
+			    u16 rate_mask, s8 index)
+{
+	/* "active" values */
+	struct iwl_scale_tbl_info *active_tbl =
+	    &(lq_sta->lq_info[lq_sta->active_tbl]);
+	s32 active_sr = active_tbl->win[index].success_ratio;
+	s32 active_tpt = active_tbl->expected_tpt[index];
+
+	/* expected "search" throughput */
+	s32 *tpt_tbl = tbl->expected_tpt;
+
+	s32 new_rate, high, low, start_hi;
+	u16 high_low;
+	s8 rate = index;
+
+	new_rate = high = low = start_hi = IWL_RATE_INVALID;
+
+	for (; ;) {
+		high_low = rs_get_adjacent_rate(priv, rate, rate_mask,
+						tbl->lq_type);
+
+		low = high_low & 0xff;
+		high = (high_low >> 8) & 0xff;
+
+		/*
+		 * Lower the "search" bit rate, to give new "search" mode
+		 * approximately the same throughput as "active" if:
+		 *
+		 * 1) "Active" mode has been working modestly well (but not
+		 *    great), and expected "search" throughput (under perfect
+		 *    conditions) at candidate rate is above the actual
+		 *    measured "active" throughput (but less than expected
+		 *    "active" throughput under perfect conditions).
+		 * OR
+		 * 2) "Active" mode has been working perfectly or very well
+		 *    and expected "search" throughput (under perfect
+		 *    conditions) at candidate rate is above expected
+		 *    "active" throughput (under perfect conditions).
+		 */
+		if ((((100 * tpt_tbl[rate]) > lq_sta->last_tpt) &&
+		     ((active_sr > IWL_RATE_DECREASE_TH) &&
+		      (active_sr <= IWL_RATE_HIGH_TH) &&
+		      (tpt_tbl[rate] <= active_tpt))) ||
+		    ((active_sr >= IWL_RATE_SCALE_SWITCH) &&
+		     (tpt_tbl[rate] > active_tpt))) {
+
+			/* (2nd or later pass)
+			 * If we've already tried to raise the rate, and are
+			 * now trying to lower it, use the higher rate. */
+			if (start_hi != IWL_RATE_INVALID) {
+				new_rate = start_hi;
+				break;
+			}
+
+			new_rate = rate;
+
+			/* Loop again with lower rate */
+			if (low != IWL_RATE_INVALID)
+				rate = low;
+
+			/* Lower rate not available, use the original */
+			else
+				break;
+
+		/* Else try to raise the "search" rate to match "active" */
+		} else {
+			/* (2nd or later pass)
+			 * If we've already tried to lower the rate, and are
+			 * now trying to raise it, use the lower rate. */
+			if (new_rate != IWL_RATE_INVALID)
+				break;
+
+			/* Loop again with higher rate */
+			else if (high != IWL_RATE_INVALID) {
+				start_hi = high;
+				rate = high;
+
+			/* Higher rate not available, use the original */
+			} else {
+				new_rate = rate;
+				break;
+			}
+		}
+	}
+
+	return new_rate;
+}
+
+/*
+ * Set up search table for MIMO2
+ */
+static int rs_switch_to_mimo2(struct iwl_priv *priv,
+			     struct iwl_lq_sta *lq_sta,
+			     struct ieee80211_conf *conf,
+			     struct ieee80211_sta *sta,
+			     struct iwl_scale_tbl_info *tbl, int index)
+{
+	u16 rate_mask;
+	s32 rate;
+	s8 is_green = lq_sta->is_green;
+	struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
+	struct iwl_rxon_context *ctx = sta_priv->ctx;
+
+	if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
+		return -1;
+
+	if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2)
+						== WLAN_HT_CAP_SM_PS_STATIC)
+		return -1;
+
+	/* Need both Tx chains/antennas to support MIMO */
+	if (priv->hw_params.tx_chains_num < 2)
+		return -1;
+
+	IWL_DEBUG_RATE(priv, "LQ: try to switch to MIMO2\n");
+
+	tbl->lq_type = LQ_MIMO2;
+	tbl->is_dup = lq_sta->is_dup;
+	tbl->action = 0;
+	tbl->max_search = IWL_MAX_SEARCH;
+	rate_mask = lq_sta->active_mimo2_rate;
+
+	if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap))
+		tbl->is_ht40 = 1;
+	else
+		tbl->is_ht40 = 0;
+
+	rs_set_expected_tpt_table(lq_sta, tbl);
+
+	rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
+
+	IWL_DEBUG_RATE(priv, "LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask);
+	if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
+		IWL_DEBUG_RATE(priv, "Can't switch with index %d rate mask %x\n",
+						rate, rate_mask);
+		return -1;
+	}
+	tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green);
+
+	IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n",
+		     tbl->current_rate, is_green);
+	return 0;
+}
+
+/*
+ * Set up search table for MIMO3
+ */
+static int rs_switch_to_mimo3(struct iwl_priv *priv,
+			     struct iwl_lq_sta *lq_sta,
+			     struct ieee80211_conf *conf,
+			     struct ieee80211_sta *sta,
+			     struct iwl_scale_tbl_info *tbl, int index)
+{
+	u16 rate_mask;
+	s32 rate;
+	s8 is_green = lq_sta->is_green;
+	struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
+	struct iwl_rxon_context *ctx = sta_priv->ctx;
+
+	if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
+		return -1;
+
+	if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2)
+						== WLAN_HT_CAP_SM_PS_STATIC)
+		return -1;
+
+	/* Need both Tx chains/antennas to support MIMO */
+	if (priv->hw_params.tx_chains_num < 3)
+		return -1;
+
+	IWL_DEBUG_RATE(priv, "LQ: try to switch to MIMO3\n");
+
+	tbl->lq_type = LQ_MIMO3;
+	tbl->is_dup = lq_sta->is_dup;
+	tbl->action = 0;
+	tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH;
+	rate_mask = lq_sta->active_mimo3_rate;
+
+	if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap))
+		tbl->is_ht40 = 1;
+	else
+		tbl->is_ht40 = 0;
+
+	rs_set_expected_tpt_table(lq_sta, tbl);
+
+	rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
+
+	IWL_DEBUG_RATE(priv, "LQ: MIMO3 best rate %d mask %X\n",
+		rate, rate_mask);
+	if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
+		IWL_DEBUG_RATE(priv, "Can't switch with index %d rate mask %x\n",
+						rate, rate_mask);
+		return -1;
+	}
+	tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green);
+
+	IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n",
+		     tbl->current_rate, is_green);
+	return 0;
+}
+
+/*
+ * Set up search table for SISO
+ */
+static int rs_switch_to_siso(struct iwl_priv *priv,
+			     struct iwl_lq_sta *lq_sta,
+			     struct ieee80211_conf *conf,
+			     struct ieee80211_sta *sta,
+			     struct iwl_scale_tbl_info *tbl, int index)
+{
+	u16 rate_mask;
+	u8 is_green = lq_sta->is_green;
+	s32 rate;
+	struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
+	struct iwl_rxon_context *ctx = sta_priv->ctx;
+
+	if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
+		return -1;
+
+	IWL_DEBUG_RATE(priv, "LQ: try to switch to SISO\n");
+
+	tbl->is_dup = lq_sta->is_dup;
+	tbl->lq_type = LQ_SISO;
+	tbl->action = 0;
+	tbl->max_search = IWL_MAX_SEARCH;
+	rate_mask = lq_sta->active_siso_rate;
+
+	if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap))
+		tbl->is_ht40 = 1;
+	else
+		tbl->is_ht40 = 0;
+
+	if (is_green)
+		tbl->is_SGI = 0; /*11n spec: no SGI in SISO+Greenfield*/
+
+	rs_set_expected_tpt_table(lq_sta, tbl);
+	rate = rs_get_best_rate(priv, lq_sta, tbl, rate_mask, index);
+
+	IWL_DEBUG_RATE(priv, "LQ: get best rate %d mask %X\n", rate, rate_mask);
+	if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) {
+		IWL_DEBUG_RATE(priv, "can not switch with index %d rate mask %x\n",
+			     rate, rate_mask);
+		return -1;
+	}
+	tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, rate, is_green);
+	IWL_DEBUG_RATE(priv, "LQ: Switch to new mcs %X index is green %X\n",
+		     tbl->current_rate, is_green);
+	return 0;
+}
+
+/*
+ * Try to switch to new modulation mode from legacy
+ */
+static int rs_move_legacy_other(struct iwl_priv *priv,
+				struct iwl_lq_sta *lq_sta,
+				struct ieee80211_conf *conf,
+				struct ieee80211_sta *sta,
+				int index)
+{
+	struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+	struct iwl_scale_tbl_info *search_tbl =
+				&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
+	struct iwl_rate_scale_data *window = &(tbl->win[index]);
+	u32 sz = (sizeof(struct iwl_scale_tbl_info) -
+		  (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
+	u8 start_action;
+	u8 valid_tx_ant = priv->eeprom_data->valid_tx_ant;
+	u8 tx_chains_num = priv->hw_params.tx_chains_num;
+	int ret = 0;
+	u8 update_search_tbl_counter = 0;
+
+	switch (priv->bt_traffic_load) {
+	case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
+		/* nothing */
+		break;
+	case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
+		/* avoid antenna B unless MIMO */
+		if (tbl->action == IWL_LEGACY_SWITCH_ANTENNA2)
+			tbl->action = IWL_LEGACY_SWITCH_SISO;
+		break;
+	case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
+	case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
+		/* avoid antenna B and MIMO */
+		valid_tx_ant =
+			first_antenna(priv->eeprom_data->valid_tx_ant);
+		if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2 &&
+		    tbl->action != IWL_LEGACY_SWITCH_SISO)
+			tbl->action = IWL_LEGACY_SWITCH_SISO;
+		break;
+	default:
+		IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load);
+		break;
+	}
+
+	if (!iwl_ht_enabled(priv))
+		/* stay in Legacy */
+		tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
+	else if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE &&
+		   tbl->action > IWL_LEGACY_SWITCH_SISO)
+		tbl->action = IWL_LEGACY_SWITCH_SISO;
+
+	/* configure as 1x1 if bt full concurrency */
+	if (priv->bt_full_concurrent) {
+		if (!iwl_ht_enabled(priv))
+			tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
+		else if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2)
+			tbl->action = IWL_LEGACY_SWITCH_SISO;
+		valid_tx_ant =
+			first_antenna(priv->eeprom_data->valid_tx_ant);
+	}
+
+	start_action = tbl->action;
+	for (; ;) {
+		lq_sta->action_counter++;
+		switch (tbl->action) {
+		case IWL_LEGACY_SWITCH_ANTENNA1:
+		case IWL_LEGACY_SWITCH_ANTENNA2:
+			IWL_DEBUG_RATE(priv, "LQ: Legacy toggle Antenna\n");
+
+			if ((tbl->action == IWL_LEGACY_SWITCH_ANTENNA1 &&
+							tx_chains_num <= 1) ||
+			    (tbl->action == IWL_LEGACY_SWITCH_ANTENNA2 &&
+							tx_chains_num <= 2))
+				break;
+
+			/* Don't change antenna if success has been great */
+			if (window->success_ratio >= IWL_RS_GOOD_RATIO &&
+			    !priv->bt_full_concurrent &&
+			    priv->bt_traffic_load ==
+					IWL_BT_COEX_TRAFFIC_LOAD_NONE)
+				break;
+
+			/* Set up search table to try other antenna */
+			memcpy(search_tbl, tbl, sz);
+
+			if (rs_toggle_antenna(valid_tx_ant,
+				&search_tbl->current_rate, search_tbl)) {
+				update_search_tbl_counter = 1;
+				rs_set_expected_tpt_table(lq_sta, search_tbl);
+				goto out;
+			}
+			break;
+		case IWL_LEGACY_SWITCH_SISO:
+			IWL_DEBUG_RATE(priv, "LQ: Legacy switch to SISO\n");
+
+			/* Set up search table to try SISO */
+			memcpy(search_tbl, tbl, sz);
+			search_tbl->is_SGI = 0;
+			ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
+						 search_tbl, index);
+			if (!ret) {
+				lq_sta->action_counter = 0;
+				goto out;
+			}
+
+			break;
+		case IWL_LEGACY_SWITCH_MIMO2_AB:
+		case IWL_LEGACY_SWITCH_MIMO2_AC:
+		case IWL_LEGACY_SWITCH_MIMO2_BC:
+			IWL_DEBUG_RATE(priv, "LQ: Legacy switch to MIMO2\n");
+
+			/* Set up search table to try MIMO */
+			memcpy(search_tbl, tbl, sz);
+			search_tbl->is_SGI = 0;
+
+			if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AB)
+				search_tbl->ant_type = ANT_AB;
+			else if (tbl->action == IWL_LEGACY_SWITCH_MIMO2_AC)
+				search_tbl->ant_type = ANT_AC;
+			else
+				search_tbl->ant_type = ANT_BC;
+
+			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
+				break;
+
+			ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta,
+						 search_tbl, index);
+			if (!ret) {
+				lq_sta->action_counter = 0;
+				goto out;
+			}
+			break;
+
+		case IWL_LEGACY_SWITCH_MIMO3_ABC:
+			IWL_DEBUG_RATE(priv, "LQ: Legacy switch to MIMO3\n");
+
+			/* Set up search table to try MIMO3 */
+			memcpy(search_tbl, tbl, sz);
+			search_tbl->is_SGI = 0;
+
+			search_tbl->ant_type = ANT_ABC;
+
+			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
+				break;
+
+			ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta,
+						 search_tbl, index);
+			if (!ret) {
+				lq_sta->action_counter = 0;
+				goto out;
+			}
+			break;
+		}
+		tbl->action++;
+		if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC)
+			tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
+
+		if (tbl->action == start_action)
+			break;
+
+	}
+	search_tbl->lq_type = LQ_NONE;
+	return 0;
+
+out:
+	lq_sta->search_better_tbl = 1;
+	tbl->action++;
+	if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC)
+		tbl->action = IWL_LEGACY_SWITCH_ANTENNA1;
+	if (update_search_tbl_counter)
+		search_tbl->action = tbl->action;
+	return 0;
+
+}
+
+/*
+ * Try to switch to new modulation mode from SISO
+ */
+static int rs_move_siso_to_other(struct iwl_priv *priv,
+				 struct iwl_lq_sta *lq_sta,
+				 struct ieee80211_conf *conf,
+				 struct ieee80211_sta *sta, int index)
+{
+	u8 is_green = lq_sta->is_green;
+	struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+	struct iwl_scale_tbl_info *search_tbl =
+				&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
+	struct iwl_rate_scale_data *window = &(tbl->win[index]);
+	struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
+	u32 sz = (sizeof(struct iwl_scale_tbl_info) -
+		  (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
+	u8 start_action;
+	u8 valid_tx_ant = priv->eeprom_data->valid_tx_ant;
+	u8 tx_chains_num = priv->hw_params.tx_chains_num;
+	u8 update_search_tbl_counter = 0;
+	int ret;
+
+	switch (priv->bt_traffic_load) {
+	case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
+		/* nothing */
+		break;
+	case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
+		/* avoid antenna B unless MIMO */
+		if (tbl->action == IWL_SISO_SWITCH_ANTENNA2)
+			tbl->action = IWL_SISO_SWITCH_MIMO2_AB;
+		break;
+	case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
+	case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
+		/* avoid antenna B and MIMO */
+		valid_tx_ant =
+			first_antenna(priv->eeprom_data->valid_tx_ant);
+		if (tbl->action != IWL_SISO_SWITCH_ANTENNA1)
+			tbl->action = IWL_SISO_SWITCH_ANTENNA1;
+		break;
+	default:
+		IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load);
+		break;
+	}
+
+	if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE &&
+	    tbl->action > IWL_SISO_SWITCH_ANTENNA2) {
+		/* stay in SISO */
+		tbl->action = IWL_SISO_SWITCH_ANTENNA1;
+	}
+
+	/* configure as 1x1 if bt full concurrency */
+	if (priv->bt_full_concurrent) {
+		valid_tx_ant =
+			first_antenna(priv->eeprom_data->valid_tx_ant);
+		if (tbl->action >= IWL_LEGACY_SWITCH_ANTENNA2)
+			tbl->action = IWL_SISO_SWITCH_ANTENNA1;
+	}
+
+	start_action = tbl->action;
+	for (;;) {
+		lq_sta->action_counter++;
+		switch (tbl->action) {
+		case IWL_SISO_SWITCH_ANTENNA1:
+		case IWL_SISO_SWITCH_ANTENNA2:
+			IWL_DEBUG_RATE(priv, "LQ: SISO toggle Antenna\n");
+			if ((tbl->action == IWL_SISO_SWITCH_ANTENNA1 &&
+						tx_chains_num <= 1) ||
+			    (tbl->action == IWL_SISO_SWITCH_ANTENNA2 &&
+						tx_chains_num <= 2))
+				break;
+
+			if (window->success_ratio >= IWL_RS_GOOD_RATIO &&
+			    !priv->bt_full_concurrent &&
+			    priv->bt_traffic_load ==
+					IWL_BT_COEX_TRAFFIC_LOAD_NONE)
+				break;
+
+			memcpy(search_tbl, tbl, sz);
+			if (rs_toggle_antenna(valid_tx_ant,
+				       &search_tbl->current_rate, search_tbl)) {
+				update_search_tbl_counter = 1;
+				goto out;
+			}
+			break;
+		case IWL_SISO_SWITCH_MIMO2_AB:
+		case IWL_SISO_SWITCH_MIMO2_AC:
+		case IWL_SISO_SWITCH_MIMO2_BC:
+			IWL_DEBUG_RATE(priv, "LQ: SISO switch to MIMO2\n");
+			memcpy(search_tbl, tbl, sz);
+			search_tbl->is_SGI = 0;
+
+			if (tbl->action == IWL_SISO_SWITCH_MIMO2_AB)
+				search_tbl->ant_type = ANT_AB;
+			else if (tbl->action == IWL_SISO_SWITCH_MIMO2_AC)
+				search_tbl->ant_type = ANT_AC;
+			else
+				search_tbl->ant_type = ANT_BC;
+
+			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
+				break;
+
+			ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta,
+						 search_tbl, index);
+			if (!ret)
+				goto out;
+			break;
+		case IWL_SISO_SWITCH_GI:
+			if (!tbl->is_ht40 && !(ht_cap->cap &
+						IEEE80211_HT_CAP_SGI_20))
+				break;
+			if (tbl->is_ht40 && !(ht_cap->cap &
+						IEEE80211_HT_CAP_SGI_40))
+				break;
+
+			IWL_DEBUG_RATE(priv, "LQ: SISO toggle SGI/NGI\n");
+
+			memcpy(search_tbl, tbl, sz);
+			if (is_green) {
+				if (!tbl->is_SGI)
+					break;
+				else
+					IWL_ERR(priv,
+						"SGI was set in GF+SISO\n");
+			}
+			search_tbl->is_SGI = !tbl->is_SGI;
+			rs_set_expected_tpt_table(lq_sta, search_tbl);
+			if (tbl->is_SGI) {
+				s32 tpt = lq_sta->last_tpt / 100;
+				if (tpt >= search_tbl->expected_tpt[index])
+					break;
+			}
+			search_tbl->current_rate =
+				rate_n_flags_from_tbl(priv, search_tbl,
+						      index, is_green);
+			update_search_tbl_counter = 1;
+			goto out;
+		case IWL_SISO_SWITCH_MIMO3_ABC:
+			IWL_DEBUG_RATE(priv, "LQ: SISO switch to MIMO3\n");
+			memcpy(search_tbl, tbl, sz);
+			search_tbl->is_SGI = 0;
+			search_tbl->ant_type = ANT_ABC;
+
+			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
+				break;
+
+			ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta,
+						 search_tbl, index);
+			if (!ret)
+				goto out;
+			break;
+		}
+		tbl->action++;
+		if (tbl->action > IWL_LEGACY_SWITCH_MIMO3_ABC)
+			tbl->action = IWL_SISO_SWITCH_ANTENNA1;
+
+		if (tbl->action == start_action)
+			break;
+	}
+	search_tbl->lq_type = LQ_NONE;
+	return 0;
+
+ out:
+	lq_sta->search_better_tbl = 1;
+	tbl->action++;
+	if (tbl->action > IWL_SISO_SWITCH_MIMO3_ABC)
+		tbl->action = IWL_SISO_SWITCH_ANTENNA1;
+	if (update_search_tbl_counter)
+		search_tbl->action = tbl->action;
+
+	return 0;
+}
+
+/*
+ * Try to switch to new modulation mode from MIMO2
+ */
+static int rs_move_mimo2_to_other(struct iwl_priv *priv,
+				 struct iwl_lq_sta *lq_sta,
+				 struct ieee80211_conf *conf,
+				 struct ieee80211_sta *sta, int index)
+{
+	s8 is_green = lq_sta->is_green;
+	struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+	struct iwl_scale_tbl_info *search_tbl =
+				&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
+	struct iwl_rate_scale_data *window = &(tbl->win[index]);
+	struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
+	u32 sz = (sizeof(struct iwl_scale_tbl_info) -
+		  (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
+	u8 start_action;
+	u8 valid_tx_ant = priv->eeprom_data->valid_tx_ant;
+	u8 tx_chains_num = priv->hw_params.tx_chains_num;
+	u8 update_search_tbl_counter = 0;
+	int ret;
+
+	switch (priv->bt_traffic_load) {
+	case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
+		/* nothing */
+		break;
+	case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
+	case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
+		/* avoid antenna B and MIMO */
+		if (tbl->action != IWL_MIMO2_SWITCH_SISO_A)
+			tbl->action = IWL_MIMO2_SWITCH_SISO_A;
+		break;
+	case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
+		/* avoid antenna B unless MIMO */
+		if (tbl->action == IWL_MIMO2_SWITCH_SISO_B ||
+		    tbl->action == IWL_MIMO2_SWITCH_SISO_C)
+			tbl->action = IWL_MIMO2_SWITCH_SISO_A;
+		break;
+	default:
+		IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load);
+		break;
+	}
+
+	if ((iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE) &&
+	    (tbl->action < IWL_MIMO2_SWITCH_SISO_A ||
+	     tbl->action > IWL_MIMO2_SWITCH_SISO_C)) {
+		/* switch in SISO */
+		tbl->action = IWL_MIMO2_SWITCH_SISO_A;
+	}
+
+	/* configure as 1x1 if bt full concurrency */
+	if (priv->bt_full_concurrent &&
+	    (tbl->action < IWL_MIMO2_SWITCH_SISO_A ||
+	     tbl->action > IWL_MIMO2_SWITCH_SISO_C))
+		tbl->action = IWL_MIMO2_SWITCH_SISO_A;
+
+	start_action = tbl->action;
+	for (;;) {
+		lq_sta->action_counter++;
+		switch (tbl->action) {
+		case IWL_MIMO2_SWITCH_ANTENNA1:
+		case IWL_MIMO2_SWITCH_ANTENNA2:
+			IWL_DEBUG_RATE(priv, "LQ: MIMO2 toggle Antennas\n");
+
+			if (tx_chains_num <= 2)
+				break;
+
+			if (window->success_ratio >= IWL_RS_GOOD_RATIO)
+				break;
+
+			memcpy(search_tbl, tbl, sz);
+			if (rs_toggle_antenna(valid_tx_ant,
+				       &search_tbl->current_rate, search_tbl)) {
+				update_search_tbl_counter = 1;
+				goto out;
+			}
+			break;
+		case IWL_MIMO2_SWITCH_SISO_A:
+		case IWL_MIMO2_SWITCH_SISO_B:
+		case IWL_MIMO2_SWITCH_SISO_C:
+			IWL_DEBUG_RATE(priv, "LQ: MIMO2 switch to SISO\n");
+
+			/* Set up new search table for SISO */
+			memcpy(search_tbl, tbl, sz);
+
+			if (tbl->action == IWL_MIMO2_SWITCH_SISO_A)
+				search_tbl->ant_type = ANT_A;
+			else if (tbl->action == IWL_MIMO2_SWITCH_SISO_B)
+				search_tbl->ant_type = ANT_B;
+			else
+				search_tbl->ant_type = ANT_C;
+
+			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
+				break;
+
+			ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
+						 search_tbl, index);
+			if (!ret)
+				goto out;
+
+			break;
+
+		case IWL_MIMO2_SWITCH_GI:
+			if (!tbl->is_ht40 && !(ht_cap->cap &
+						IEEE80211_HT_CAP_SGI_20))
+				break;
+			if (tbl->is_ht40 && !(ht_cap->cap &
+						IEEE80211_HT_CAP_SGI_40))
+				break;
+
+			IWL_DEBUG_RATE(priv, "LQ: MIMO2 toggle SGI/NGI\n");
+
+			/* Set up new search table for MIMO2 */
+			memcpy(search_tbl, tbl, sz);
+			search_tbl->is_SGI = !tbl->is_SGI;
+			rs_set_expected_tpt_table(lq_sta, search_tbl);
+			/*
+			 * If active table already uses the fastest possible
+			 * modulation (dual stream with short guard interval),
+			 * and it's working well, there's no need to look
+			 * for a better type of modulation!
+			 */
+			if (tbl->is_SGI) {
+				s32 tpt = lq_sta->last_tpt / 100;
+				if (tpt >= search_tbl->expected_tpt[index])
+					break;
+			}
+			search_tbl->current_rate =
+				rate_n_flags_from_tbl(priv, search_tbl,
+						      index, is_green);
+			update_search_tbl_counter = 1;
+			goto out;
+
+		case IWL_MIMO2_SWITCH_MIMO3_ABC:
+			IWL_DEBUG_RATE(priv, "LQ: MIMO2 switch to MIMO3\n");
+			memcpy(search_tbl, tbl, sz);
+			search_tbl->is_SGI = 0;
+			search_tbl->ant_type = ANT_ABC;
+
+			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
+				break;
+
+			ret = rs_switch_to_mimo3(priv, lq_sta, conf, sta,
+						 search_tbl, index);
+			if (!ret)
+				goto out;
+
+			break;
+		}
+		tbl->action++;
+		if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC)
+			tbl->action = IWL_MIMO2_SWITCH_ANTENNA1;
+
+		if (tbl->action == start_action)
+			break;
+	}
+	search_tbl->lq_type = LQ_NONE;
+	return 0;
+ out:
+	lq_sta->search_better_tbl = 1;
+	tbl->action++;
+	if (tbl->action > IWL_MIMO2_SWITCH_MIMO3_ABC)
+		tbl->action = IWL_MIMO2_SWITCH_ANTENNA1;
+	if (update_search_tbl_counter)
+		search_tbl->action = tbl->action;
+
+	return 0;
+
+}
+
+/*
+ * Try to switch to new modulation mode from MIMO3
+ */
+static int rs_move_mimo3_to_other(struct iwl_priv *priv,
+				 struct iwl_lq_sta *lq_sta,
+				 struct ieee80211_conf *conf,
+				 struct ieee80211_sta *sta, int index)
+{
+	s8 is_green = lq_sta->is_green;
+	struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+	struct iwl_scale_tbl_info *search_tbl =
+				&(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
+	struct iwl_rate_scale_data *window = &(tbl->win[index]);
+	struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
+	u32 sz = (sizeof(struct iwl_scale_tbl_info) -
+		  (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT));
+	u8 start_action;
+	u8 valid_tx_ant = priv->eeprom_data->valid_tx_ant;
+	u8 tx_chains_num = priv->hw_params.tx_chains_num;
+	int ret;
+	u8 update_search_tbl_counter = 0;
+
+	switch (priv->bt_traffic_load) {
+	case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
+		/* nothing */
+		break;
+	case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
+	case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
+		/* avoid antenna B and MIMO */
+		if (tbl->action != IWL_MIMO3_SWITCH_SISO_A)
+			tbl->action = IWL_MIMO3_SWITCH_SISO_A;
+		break;
+	case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
+		/* avoid antenna B unless MIMO */
+		if (tbl->action == IWL_MIMO3_SWITCH_SISO_B ||
+		    tbl->action == IWL_MIMO3_SWITCH_SISO_C)
+			tbl->action = IWL_MIMO3_SWITCH_SISO_A;
+		break;
+	default:
+		IWL_ERR(priv, "Invalid BT load %d", priv->bt_traffic_load);
+		break;
+	}
+
+	if ((iwl_tx_ant_restriction(priv) == IWL_ANT_OK_SINGLE) &&
+	    (tbl->action < IWL_MIMO3_SWITCH_SISO_A ||
+	     tbl->action > IWL_MIMO3_SWITCH_SISO_C)) {
+		/* switch in SISO */
+		tbl->action = IWL_MIMO3_SWITCH_SISO_A;
+	}
+
+	/* configure as 1x1 if bt full concurrency */
+	if (priv->bt_full_concurrent &&
+	    (tbl->action < IWL_MIMO3_SWITCH_SISO_A ||
+	     tbl->action > IWL_MIMO3_SWITCH_SISO_C))
+		tbl->action = IWL_MIMO3_SWITCH_SISO_A;
+
+	start_action = tbl->action;
+	for (;;) {
+		lq_sta->action_counter++;
+		switch (tbl->action) {
+		case IWL_MIMO3_SWITCH_ANTENNA1:
+		case IWL_MIMO3_SWITCH_ANTENNA2:
+			IWL_DEBUG_RATE(priv, "LQ: MIMO3 toggle Antennas\n");
+
+			if (tx_chains_num <= 3)
+				break;
+
+			if (window->success_ratio >= IWL_RS_GOOD_RATIO)
+				break;
+
+			memcpy(search_tbl, tbl, sz);
+			if (rs_toggle_antenna(valid_tx_ant,
+				       &search_tbl->current_rate, search_tbl))
+				goto out;
+			break;
+		case IWL_MIMO3_SWITCH_SISO_A:
+		case IWL_MIMO3_SWITCH_SISO_B:
+		case IWL_MIMO3_SWITCH_SISO_C:
+			IWL_DEBUG_RATE(priv, "LQ: MIMO3 switch to SISO\n");
+
+			/* Set up new search table for SISO */
+			memcpy(search_tbl, tbl, sz);
+
+			if (tbl->action == IWL_MIMO3_SWITCH_SISO_A)
+				search_tbl->ant_type = ANT_A;
+			else if (tbl->action == IWL_MIMO3_SWITCH_SISO_B)
+				search_tbl->ant_type = ANT_B;
+			else
+				search_tbl->ant_type = ANT_C;
+
+			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
+				break;
+
+			ret = rs_switch_to_siso(priv, lq_sta, conf, sta,
+						 search_tbl, index);
+			if (!ret)
+				goto out;
+
+			break;
+
+		case IWL_MIMO3_SWITCH_MIMO2_AB:
+		case IWL_MIMO3_SWITCH_MIMO2_AC:
+		case IWL_MIMO3_SWITCH_MIMO2_BC:
+			IWL_DEBUG_RATE(priv, "LQ: MIMO3 switch to MIMO2\n");
+
+			memcpy(search_tbl, tbl, sz);
+			search_tbl->is_SGI = 0;
+			if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AB)
+				search_tbl->ant_type = ANT_AB;
+			else if (tbl->action == IWL_MIMO3_SWITCH_MIMO2_AC)
+				search_tbl->ant_type = ANT_AC;
+			else
+				search_tbl->ant_type = ANT_BC;
+
+			if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type))
+				break;
+
+			ret = rs_switch_to_mimo2(priv, lq_sta, conf, sta,
+						 search_tbl, index);
+			if (!ret)
+				goto out;
+
+			break;
+
+		case IWL_MIMO3_SWITCH_GI:
+			if (!tbl->is_ht40 && !(ht_cap->cap &
+						IEEE80211_HT_CAP_SGI_20))
+				break;
+			if (tbl->is_ht40 && !(ht_cap->cap &
+						IEEE80211_HT_CAP_SGI_40))
+				break;
+
+			IWL_DEBUG_RATE(priv, "LQ: MIMO3 toggle SGI/NGI\n");
+
+			/* Set up new search table for MIMO */
+			memcpy(search_tbl, tbl, sz);
+			search_tbl->is_SGI = !tbl->is_SGI;
+			rs_set_expected_tpt_table(lq_sta, search_tbl);
+			/*
+			 * If active table already uses the fastest possible
+			 * modulation (dual stream with short guard interval),
+			 * and it's working well, there's no need to look
+			 * for a better type of modulation!
+			 */
+			if (tbl->is_SGI) {
+				s32 tpt = lq_sta->last_tpt / 100;
+				if (tpt >= search_tbl->expected_tpt[index])
+					break;
+			}
+			search_tbl->current_rate =
+				rate_n_flags_from_tbl(priv, search_tbl,
+						      index, is_green);
+			update_search_tbl_counter = 1;
+			goto out;
+		}
+		tbl->action++;
+		if (tbl->action > IWL_MIMO3_SWITCH_GI)
+			tbl->action = IWL_MIMO3_SWITCH_ANTENNA1;
+
+		if (tbl->action == start_action)
+			break;
+	}
+	search_tbl->lq_type = LQ_NONE;
+	return 0;
+ out:
+	lq_sta->search_better_tbl = 1;
+	tbl->action++;
+	if (tbl->action > IWL_MIMO3_SWITCH_GI)
+		tbl->action = IWL_MIMO3_SWITCH_ANTENNA1;
+	if (update_search_tbl_counter)
+		search_tbl->action = tbl->action;
+
+	return 0;
+
+}
+
+/*
+ * Check whether we should continue using same modulation mode, or
+ * begin search for a new mode, based on:
+ * 1) # tx successes or failures while using this mode
+ * 2) # times calling this function
+ * 3) elapsed time in this mode (not used, for now)
+ */
+static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search)
+{
+	struct iwl_scale_tbl_info *tbl;
+	int i;
+	int active_tbl;
+	int flush_interval_passed = 0;
+	struct iwl_priv *priv;
+
+	priv = lq_sta->drv;
+	active_tbl = lq_sta->active_tbl;
+
+	tbl = &(lq_sta->lq_info[active_tbl]);
+
+	/* If we've been disallowing search, see if we should now allow it */
+	if (lq_sta->stay_in_tbl) {
+
+		/* Elapsed time using current modulation mode */
+		if (lq_sta->flush_timer)
+			flush_interval_passed =
+			time_after(jiffies,
+					(unsigned long)(lq_sta->flush_timer +
+					IWL_RATE_SCALE_FLUSH_INTVL));
+
+		/*
+		 * Check if we should allow search for new modulation mode.
+		 * If many frames have failed or succeeded, or we've used
+		 * this same modulation for a long time, allow search, and
+		 * reset history stats that keep track of whether we should
+		 * allow a new search.  Also (below) reset all bitmaps and
+		 * stats in active history.
+		 */
+		if (force_search ||
+		    (lq_sta->total_failed > lq_sta->max_failure_limit) ||
+		    (lq_sta->total_success > lq_sta->max_success_limit) ||
+		    ((!lq_sta->search_better_tbl) && (lq_sta->flush_timer)
+		     && (flush_interval_passed))) {
+			IWL_DEBUG_RATE(priv, "LQ: stay is expired %d %d %d\n",
+				     lq_sta->total_failed,
+				     lq_sta->total_success,
+				     flush_interval_passed);
+
+			/* Allow search for new mode */
+			lq_sta->stay_in_tbl = 0;	/* only place reset */
+			lq_sta->total_failed = 0;
+			lq_sta->total_success = 0;
+			lq_sta->flush_timer = 0;
+
+		/*
+		 * Else if we've used this modulation mode enough repetitions
+		 * (regardless of elapsed time or success/failure), reset
+		 * history bitmaps and rate-specific stats for all rates in
+		 * active table.
+		 */
+		} else {
+			lq_sta->table_count++;
+			if (lq_sta->table_count >=
+			    lq_sta->table_count_limit) {
+				lq_sta->table_count = 0;
+
+				IWL_DEBUG_RATE(priv, "LQ: stay in table clear win\n");
+				for (i = 0; i < IWL_RATE_COUNT; i++)
+					rs_rate_scale_clear_window(
+						&(tbl->win[i]));
+			}
+		}
+
+		/* If transitioning to allow "search", reset all history
+		 * bitmaps and stats in active table (this will become the new
+		 * "search" table). */
+		if (!lq_sta->stay_in_tbl) {
+			for (i = 0; i < IWL_RATE_COUNT; i++)
+				rs_rate_scale_clear_window(&(tbl->win[i]));
+		}
+	}
+}
+
+/*
+ * setup rate table in uCode
+ */
+static void rs_update_rate_tbl(struct iwl_priv *priv,
+			       struct iwl_rxon_context *ctx,
+			       struct iwl_lq_sta *lq_sta,
+			       struct iwl_scale_tbl_info *tbl,
+			       int index, u8 is_green)
+{
+	u32 rate;
+
+	/* Update uCode's rate table. */
+	rate = rate_n_flags_from_tbl(priv, tbl, index, is_green);
+	rs_fill_link_cmd(priv, lq_sta, rate);
+	iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false);
+}
+
+/*
+ * Do rate scaling and search for new modulation mode.
+ */
+static void rs_rate_scale_perform(struct iwl_priv *priv,
+				  struct sk_buff *skb,
+				  struct ieee80211_sta *sta,
+				  struct iwl_lq_sta *lq_sta)
+{
+	struct ieee80211_hw *hw = priv->hw;
+	struct ieee80211_conf *conf = &hw->conf;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	int low = IWL_RATE_INVALID;
+	int high = IWL_RATE_INVALID;
+	int index;
+	int i;
+	struct iwl_rate_scale_data *window = NULL;
+	int current_tpt = IWL_INVALID_VALUE;
+	int low_tpt = IWL_INVALID_VALUE;
+	int high_tpt = IWL_INVALID_VALUE;
+	u32 fail_count;
+	s8 scale_action = 0;
+	u16 rate_mask;
+	u8 update_lq = 0;
+	struct iwl_scale_tbl_info *tbl, *tbl1;
+	u16 rate_scale_index_msk = 0;
+	u8 is_green = 0;
+	u8 active_tbl = 0;
+	u8 done_search = 0;
+	u16 high_low;
+	s32 sr;
+	u8 tid = IWL_MAX_TID_COUNT;
+	struct iwl_tid_data *tid_data;
+	struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
+	struct iwl_rxon_context *ctx = sta_priv->ctx;
+
+	IWL_DEBUG_RATE(priv, "rate scale calculate new rate for skb\n");
+
+	/* Send management frames and NO_ACK data using lowest rate. */
+	/* TODO: this could probably be improved.. */
+	if (!ieee80211_is_data(hdr->frame_control) ||
+	    info->flags & IEEE80211_TX_CTL_NO_ACK)
+		return;
+
+	lq_sta->supp_rates = sta->supp_rates[lq_sta->band];
+
+	tid = rs_tl_add_packet(lq_sta, hdr);
+	if ((tid != IWL_MAX_TID_COUNT) &&
+	    (lq_sta->tx_agg_tid_en & (1 << tid))) {
+		tid_data = &priv->tid_data[lq_sta->lq.sta_id][tid];
+		if (tid_data->agg.state == IWL_AGG_OFF)
+			lq_sta->is_agg = 0;
+		else
+			lq_sta->is_agg = 1;
+	} else
+		lq_sta->is_agg = 0;
+
+	/*
+	 * Select rate-scale / modulation-mode table to work with in
+	 * the rest of this function:  "search" if searching for better
+	 * modulation mode, or "active" if doing rate scaling within a mode.
+	 */
+	if (!lq_sta->search_better_tbl)
+		active_tbl = lq_sta->active_tbl;
+	else
+		active_tbl = 1 - lq_sta->active_tbl;
+
+	tbl = &(lq_sta->lq_info[active_tbl]);
+	if (is_legacy(tbl->lq_type))
+		lq_sta->is_green = 0;
+	else
+		lq_sta->is_green = rs_use_green(sta);
+	is_green = lq_sta->is_green;
+
+	/* current tx rate */
+	index = lq_sta->last_txrate_idx;
+
+	IWL_DEBUG_RATE(priv, "Rate scale index %d for type %d\n", index,
+		       tbl->lq_type);
+
+	/* rates available for this association, and for modulation mode */
+	rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type);
+
+	IWL_DEBUG_RATE(priv, "mask 0x%04X\n", rate_mask);
+
+	/* mask with station rate restriction */
+	if (is_legacy(tbl->lq_type)) {
+		if (lq_sta->band == IEEE80211_BAND_5GHZ)
+			/* supp_rates has no CCK bits in A mode */
+			rate_scale_index_msk = (u16) (rate_mask &
+				(lq_sta->supp_rates << IWL_FIRST_OFDM_RATE));
+		else
+			rate_scale_index_msk = (u16) (rate_mask &
+						      lq_sta->supp_rates);
+
+	} else
+		rate_scale_index_msk = rate_mask;
+
+	if (!rate_scale_index_msk)
+		rate_scale_index_msk = rate_mask;
+
+	if (!((1 << index) & rate_scale_index_msk)) {
+		IWL_ERR(priv, "Current Rate is not valid\n");
+		if (lq_sta->search_better_tbl) {
+			/* revert to active table if search table is not valid*/
+			tbl->lq_type = LQ_NONE;
+			lq_sta->search_better_tbl = 0;
+			tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+			/* get "active" rate info */
+			index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
+			rs_update_rate_tbl(priv, ctx, lq_sta, tbl,
+					   index, is_green);
+		}
+		return;
+	}
+
+	/* Get expected throughput table and history window for current rate */
+	if (!tbl->expected_tpt) {
+		IWL_ERR(priv, "tbl->expected_tpt is NULL\n");
+		return;
+	}
+
+	/* force user max rate if set by user */
+	if ((lq_sta->max_rate_idx != -1) &&
+	    (lq_sta->max_rate_idx < index)) {
+		index = lq_sta->max_rate_idx;
+		update_lq = 1;
+		window = &(tbl->win[index]);
+		goto lq_update;
+	}
+
+	window = &(tbl->win[index]);
+
+	/*
+	 * If there is not enough history to calculate actual average
+	 * throughput, keep analyzing results of more tx frames, without
+	 * changing rate or mode (bypass most of the rest of this function).
+	 * Set up new rate table in uCode only if old rate is not supported
+	 * in current association (use new rate found above).
+	 */
+	fail_count = window->counter - window->success_counter;
+	if ((fail_count < IWL_RATE_MIN_FAILURE_TH) &&
+			(window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) {
+		IWL_DEBUG_RATE(priv, "LQ: still below TH. succ=%d total=%d "
+			       "for index %d\n",
+			       window->success_counter, window->counter, index);
+
+		/* Can't calculate this yet; not enough history */
+		window->average_tpt = IWL_INVALID_VALUE;
+
+		/* Should we stay with this modulation mode,
+		 * or search for a new one? */
+		rs_stay_in_table(lq_sta, false);
+
+		goto out;
+	}
+	/* Else we have enough samples; calculate estimate of
+	 * actual average throughput */
+	if (window->average_tpt != ((window->success_ratio *
+			tbl->expected_tpt[index] + 64) / 128)) {
+		IWL_ERR(priv, "expected_tpt should have been calculated by now\n");
+		window->average_tpt = ((window->success_ratio *
+					tbl->expected_tpt[index] + 64) / 128);
+	}
+
+	/* If we are searching for better modulation mode, check success. */
+	if (lq_sta->search_better_tbl &&
+	    (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_MULTI)) {
+		/* If good success, continue using the "search" mode;
+		 * no need to send new link quality command, since we're
+		 * continuing to use the setup that we've been trying. */
+		if (window->average_tpt > lq_sta->last_tpt) {
+
+			IWL_DEBUG_RATE(priv, "LQ: SWITCHING TO NEW TABLE "
+					"suc=%d cur-tpt=%d old-tpt=%d\n",
+					window->success_ratio,
+					window->average_tpt,
+					lq_sta->last_tpt);
+
+			if (!is_legacy(tbl->lq_type))
+				lq_sta->enable_counter = 1;
+
+			/* Swap tables; "search" becomes "active" */
+			lq_sta->active_tbl = active_tbl;
+			current_tpt = window->average_tpt;
+
+		/* Else poor success; go back to mode in "active" table */
+		} else {
+
+			IWL_DEBUG_RATE(priv, "LQ: GOING BACK TO THE OLD TABLE "
+					"suc=%d cur-tpt=%d old-tpt=%d\n",
+					window->success_ratio,
+					window->average_tpt,
+					lq_sta->last_tpt);
+
+			/* Nullify "search" table */
+			tbl->lq_type = LQ_NONE;
+
+			/* Revert to "active" table */
+			active_tbl = lq_sta->active_tbl;
+			tbl = &(lq_sta->lq_info[active_tbl]);
+
+			/* Revert to "active" rate and throughput info */
+			index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
+			current_tpt = lq_sta->last_tpt;
+
+			/* Need to set up a new rate table in uCode */
+			update_lq = 1;
+		}
+
+		/* Either way, we've made a decision; modulation mode
+		 * search is done, allow rate adjustment next time. */
+		lq_sta->search_better_tbl = 0;
+		done_search = 1;	/* Don't switch modes below! */
+		goto lq_update;
+	}
+
+	/* (Else) not in search of better modulation mode, try for better
+	 * starting rate, while staying in this mode. */
+	high_low = rs_get_adjacent_rate(priv, index, rate_scale_index_msk,
+					tbl->lq_type);
+	low = high_low & 0xff;
+	high = (high_low >> 8) & 0xff;
+
+	/* If user set max rate, dont allow higher than user constrain */
+	if ((lq_sta->max_rate_idx != -1) &&
+	    (lq_sta->max_rate_idx < high))
+		high = IWL_RATE_INVALID;
+
+	sr = window->success_ratio;
+
+	/* Collect measured throughputs for current and adjacent rates */
+	current_tpt = window->average_tpt;
+	if (low != IWL_RATE_INVALID)
+		low_tpt = tbl->win[low].average_tpt;
+	if (high != IWL_RATE_INVALID)
+		high_tpt = tbl->win[high].average_tpt;
+
+	scale_action = 0;
+
+	/* Too many failures, decrease rate */
+	if ((sr <= IWL_RATE_DECREASE_TH) || (current_tpt == 0)) {
+		IWL_DEBUG_RATE(priv, "decrease rate because of low success_ratio\n");
+		scale_action = -1;
+
+	/* No throughput measured yet for adjacent rates; try increase. */
+	} else if ((low_tpt == IWL_INVALID_VALUE) &&
+		   (high_tpt == IWL_INVALID_VALUE)) {
+
+		if (high != IWL_RATE_INVALID && sr >= IWL_RATE_INCREASE_TH)
+			scale_action = 1;
+		else if (low != IWL_RATE_INVALID)
+			scale_action = 0;
+	}
+
+	/* Both adjacent throughputs are measured, but neither one has better
+	 * throughput; we're using the best rate, don't change it! */
+	else if ((low_tpt != IWL_INVALID_VALUE) &&
+		 (high_tpt != IWL_INVALID_VALUE) &&
+		 (low_tpt < current_tpt) &&
+		 (high_tpt < current_tpt))
+		scale_action = 0;
+
+	/* At least one adjacent rate's throughput is measured,
+	 * and may have better performance. */
+	else {
+		/* Higher adjacent rate's throughput is measured */
+		if (high_tpt != IWL_INVALID_VALUE) {
+			/* Higher rate has better throughput */
+			if (high_tpt > current_tpt &&
+					sr >= IWL_RATE_INCREASE_TH) {
+				scale_action = 1;
+			} else {
+				scale_action = 0;
+			}
+
+		/* Lower adjacent rate's throughput is measured */
+		} else if (low_tpt != IWL_INVALID_VALUE) {
+			/* Lower rate has better throughput */
+			if (low_tpt > current_tpt) {
+				IWL_DEBUG_RATE(priv,
+				    "decrease rate because of low tpt\n");
+				scale_action = -1;
+			} else if (sr >= IWL_RATE_INCREASE_TH) {
+				scale_action = 1;
+			}
+		}
+	}
+
+	/* Sanity check; asked for decrease, but success rate or throughput
+	 * has been good at old rate.  Don't change it. */
+	if ((scale_action == -1) && (low != IWL_RATE_INVALID) &&
+		    ((sr > IWL_RATE_HIGH_TH) ||
+		     (current_tpt > (100 * tbl->expected_tpt[low]))))
+		scale_action = 0;
+	if (!iwl_ht_enabled(priv) && !is_legacy(tbl->lq_type))
+		scale_action = -1;
+	if (iwl_tx_ant_restriction(priv) != IWL_ANT_OK_MULTI &&
+		(is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type)))
+		scale_action = -1;
+
+	if ((priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) &&
+	     (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type))) {
+		if (lq_sta->last_bt_traffic > priv->bt_traffic_load) {
+			/*
+			 * don't set scale_action, don't want to scale up if
+			 * the rate scale doesn't otherwise think that is a
+			 * good idea.
+			 */
+		} else if (lq_sta->last_bt_traffic <= priv->bt_traffic_load) {
+			scale_action = -1;
+		}
+	}
+	lq_sta->last_bt_traffic = priv->bt_traffic_load;
+
+	if ((priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) &&
+	     (is_mimo2(tbl->lq_type) || is_mimo3(tbl->lq_type))) {
+		/* search for a new modulation */
+		rs_stay_in_table(lq_sta, true);
+		goto lq_update;
+	}
+
+	switch (scale_action) {
+	case -1:
+		/* Decrease starting rate, update uCode's rate table */
+		if (low != IWL_RATE_INVALID) {
+			update_lq = 1;
+			index = low;
+		}
+
+		break;
+	case 1:
+		/* Increase starting rate, update uCode's rate table */
+		if (high != IWL_RATE_INVALID) {
+			update_lq = 1;
+			index = high;
+		}
+
+		break;
+	case 0:
+		/* No change */
+	default:
+		break;
+	}
+
+	IWL_DEBUG_RATE(priv, "choose rate scale index %d action %d low %d "
+		    "high %d type %d\n",
+		     index, scale_action, low, high, tbl->lq_type);
+
+lq_update:
+	/* Replace uCode's rate table for the destination station. */
+	if (update_lq)
+		rs_update_rate_tbl(priv, ctx, lq_sta, tbl, index, is_green);
+
+	if (iwl_tx_ant_restriction(priv) == IWL_ANT_OK_MULTI) {
+		/* Should we stay with this modulation mode,
+		 * or search for a new one? */
+	  rs_stay_in_table(lq_sta, false);
+	}
+	/*
+	 * Search for new modulation mode if we're:
+	 * 1)  Not changing rates right now
+	 * 2)  Not just finishing up a search
+	 * 3)  Allowing a new search
+	 */
+	if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) {
+		/* Save current throughput to compare with "search" throughput*/
+		lq_sta->last_tpt = current_tpt;
+
+		/* Select a new "search" modulation mode to try.
+		 * If one is found, set up the new "search" table. */
+		if (is_legacy(tbl->lq_type))
+			rs_move_legacy_other(priv, lq_sta, conf, sta, index);
+		else if (is_siso(tbl->lq_type))
+			rs_move_siso_to_other(priv, lq_sta, conf, sta, index);
+		else if (is_mimo2(tbl->lq_type))
+			rs_move_mimo2_to_other(priv, lq_sta, conf, sta, index);
+		else
+			rs_move_mimo3_to_other(priv, lq_sta, conf, sta, index);
+
+		/* If new "search" mode was selected, set up in uCode table */
+		if (lq_sta->search_better_tbl) {
+			/* Access the "search" table, clear its history. */
+			tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
+			for (i = 0; i < IWL_RATE_COUNT; i++)
+				rs_rate_scale_clear_window(&(tbl->win[i]));
+
+			/* Use new "search" start rate */
+			index = iwl_hwrate_to_plcp_idx(tbl->current_rate);
+
+			IWL_DEBUG_RATE(priv, "Switch current  mcs: %X index: %d\n",
+				     tbl->current_rate, index);
+			rs_fill_link_cmd(priv, lq_sta, tbl->current_rate);
+			iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_ASYNC, false);
+		} else
+			done_search = 1;
+	}
+
+	if (done_search && !lq_sta->stay_in_tbl) {
+		/* If the "active" (non-search) mode was legacy,
+		 * and we've tried switching antennas,
+		 * but we haven't been able to try HT modes (not available),
+		 * stay with best antenna legacy modulation for a while
+		 * before next round of mode comparisons. */
+		tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]);
+		if (is_legacy(tbl1->lq_type) && !conf_is_ht(conf) &&
+		    lq_sta->action_counter > tbl1->max_search) {
+			IWL_DEBUG_RATE(priv, "LQ: STAY in legacy table\n");
+			rs_set_stay_in_table(priv, 1, lq_sta);
+		}
+
+		/* If we're in an HT mode, and all 3 mode switch actions
+		 * have been tried and compared, stay in this best modulation
+		 * mode for a while before next round of mode comparisons. */
+		if (lq_sta->enable_counter &&
+		    (lq_sta->action_counter >= tbl1->max_search) &&
+		    iwl_ht_enabled(priv)) {
+			if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) &&
+			    (lq_sta->tx_agg_tid_en & (1 << tid)) &&
+			    (tid != IWL_MAX_TID_COUNT)) {
+				u8 sta_id = lq_sta->lq.sta_id;
+				tid_data = &priv->tid_data[sta_id][tid];
+				if (tid_data->agg.state == IWL_AGG_OFF) {
+					IWL_DEBUG_RATE(priv,
+						       "try to aggregate tid %d\n",
+						       tid);
+					rs_tl_turn_on_agg(priv, tid,
+							  lq_sta, sta);
+				}
+			}
+			rs_set_stay_in_table(priv, 0, lq_sta);
+		}
+	}
+
+out:
+	tbl->current_rate = rate_n_flags_from_tbl(priv, tbl, index, is_green);
+	lq_sta->last_txrate_idx = index;
+}
+
+/**
+ * rs_initialize_lq - Initialize a station's hardware rate table
+ *
+ * The uCode's station table contains a table of fallback rates
+ * for automatic fallback during transmission.
+ *
+ * NOTE: This sets up a default set of values.  These will be replaced later
+ *       if the driver's iwl-agn-rs rate scaling algorithm is used, instead of
+ *       rc80211_simple.
+ *
+ * NOTE: Run REPLY_ADD_STA command to set up station table entry, before
+ *       calling this function (which runs REPLY_TX_LINK_QUALITY_CMD,
+ *       which requires station table entry to exist).
+ */
+static void rs_initialize_lq(struct iwl_priv *priv,
+			     struct ieee80211_sta *sta,
+			     struct iwl_lq_sta *lq_sta)
+{
+	struct iwl_scale_tbl_info *tbl;
+	int rate_idx;
+	int i;
+	u32 rate;
+	u8 use_green = rs_use_green(sta);
+	u8 active_tbl = 0;
+	u8 valid_tx_ant;
+	struct iwl_station_priv *sta_priv;
+	struct iwl_rxon_context *ctx;
+
+	if (!sta || !lq_sta)
+		return;
+
+	sta_priv = (void *)sta->drv_priv;
+	ctx = sta_priv->ctx;
+
+	i = lq_sta->last_txrate_idx;
+
+	valid_tx_ant = priv->eeprom_data->valid_tx_ant;
+
+	if (!lq_sta->search_better_tbl)
+		active_tbl = lq_sta->active_tbl;
+	else
+		active_tbl = 1 - lq_sta->active_tbl;
+
+	tbl = &(lq_sta->lq_info[active_tbl]);
+
+	if ((i < 0) || (i >= IWL_RATE_COUNT))
+		i = 0;
+
+	rate = iwl_rates[i].plcp;
+	tbl->ant_type = first_antenna(valid_tx_ant);
+	rate |= tbl->ant_type << RATE_MCS_ANT_POS;
+
+	if (i >= IWL_FIRST_CCK_RATE && i <= IWL_LAST_CCK_RATE)
+		rate |= RATE_MCS_CCK_MSK;
+
+	rs_get_tbl_info_from_mcs(rate, priv->band, tbl, &rate_idx);
+	if (!rs_is_valid_ant(valid_tx_ant, tbl->ant_type))
+	    rs_toggle_antenna(valid_tx_ant, &rate, tbl);
+
+	rate = rate_n_flags_from_tbl(priv, tbl, rate_idx, use_green);
+	tbl->current_rate = rate;
+	rs_set_expected_tpt_table(lq_sta, tbl);
+	rs_fill_link_cmd(NULL, lq_sta, rate);
+	priv->stations[lq_sta->lq.sta_id].lq = &lq_sta->lq;
+	iwl_send_lq_cmd(priv, ctx, &lq_sta->lq, CMD_SYNC, true);
+}
+
+static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta,
+			struct ieee80211_tx_rate_control *txrc)
+{
+
+	struct sk_buff *skb = txrc->skb;
+	struct ieee80211_supported_band *sband = txrc->sband;
+	struct iwl_op_mode *op_mode __maybe_unused =
+			(struct iwl_op_mode *)priv_r;
+	struct iwl_priv *priv __maybe_unused = IWL_OP_MODE_GET_DVM(op_mode);
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct iwl_lq_sta *lq_sta = priv_sta;
+	int rate_idx;
+
+	IWL_DEBUG_RATE_LIMIT(priv, "rate scale calculate new rate for skb\n");
+
+	/* Get max rate if user set max rate */
+	if (lq_sta) {
+		lq_sta->max_rate_idx = txrc->max_rate_idx;
+		if ((sband->band == IEEE80211_BAND_5GHZ) &&
+		    (lq_sta->max_rate_idx != -1))
+			lq_sta->max_rate_idx += IWL_FIRST_OFDM_RATE;
+		if ((lq_sta->max_rate_idx < 0) ||
+		    (lq_sta->max_rate_idx >= IWL_RATE_COUNT))
+			lq_sta->max_rate_idx = -1;
+	}
+
+	/* Treat uninitialized rate scaling data same as non-existing. */
+	if (lq_sta && !lq_sta->drv) {
+		IWL_DEBUG_RATE(priv, "Rate scaling not initialized yet.\n");
+		priv_sta = NULL;
+	}
+
+	/* Send management frames and NO_ACK data using lowest rate. */
+	if (rate_control_send_low(sta, priv_sta, txrc))
+		return;
+
+	rate_idx  = lq_sta->last_txrate_idx;
+
+	if (lq_sta->last_rate_n_flags & RATE_MCS_HT_MSK) {
+		rate_idx -= IWL_FIRST_OFDM_RATE;
+		/* 6M and 9M shared same MCS index */
+		rate_idx = (rate_idx > 0) ? (rate_idx - 1) : 0;
+		if (rs_extract_rate(lq_sta->last_rate_n_flags) >=
+		    IWL_RATE_MIMO3_6M_PLCP)
+			rate_idx = rate_idx + (2 * MCS_INDEX_PER_STREAM);
+		else if (rs_extract_rate(lq_sta->last_rate_n_flags) >=
+			 IWL_RATE_MIMO2_6M_PLCP)
+			rate_idx = rate_idx + MCS_INDEX_PER_STREAM;
+		info->control.rates[0].flags = IEEE80211_TX_RC_MCS;
+		if (lq_sta->last_rate_n_flags & RATE_MCS_SGI_MSK)
+			info->control.rates[0].flags |= IEEE80211_TX_RC_SHORT_GI;
+		if (lq_sta->last_rate_n_flags & RATE_MCS_DUP_MSK)
+			info->control.rates[0].flags |= IEEE80211_TX_RC_DUP_DATA;
+		if (lq_sta->last_rate_n_flags & RATE_MCS_HT40_MSK)
+			info->control.rates[0].flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
+		if (lq_sta->last_rate_n_flags & RATE_MCS_GF_MSK)
+			info->control.rates[0].flags |= IEEE80211_TX_RC_GREEN_FIELD;
+	} else {
+		/* Check for invalid rates */
+		if ((rate_idx < 0) || (rate_idx >= IWL_RATE_COUNT_LEGACY) ||
+				((sband->band == IEEE80211_BAND_5GHZ) &&
+				 (rate_idx < IWL_FIRST_OFDM_RATE)))
+			rate_idx = rate_lowest_index(sband, sta);
+		/* On valid 5 GHz rate, adjust index */
+		else if (sband->band == IEEE80211_BAND_5GHZ)
+			rate_idx -= IWL_FIRST_OFDM_RATE;
+		info->control.rates[0].flags = 0;
+	}
+	info->control.rates[0].idx = rate_idx;
+
+}
+
+static void *rs_alloc_sta(void *priv_rate, struct ieee80211_sta *sta,
+			  gfp_t gfp)
+{
+	struct iwl_station_priv *sta_priv = (struct iwl_station_priv *) sta->drv_priv;
+	struct iwl_op_mode *op_mode __maybe_unused =
+			(struct iwl_op_mode *)priv_rate;
+	struct iwl_priv *priv __maybe_unused = IWL_OP_MODE_GET_DVM(op_mode);
+
+	IWL_DEBUG_RATE(priv, "create station rate scale window\n");
+
+	return &sta_priv->lq_sta;
+}
+
+/*
+ * Called after adding a new station to initialize rate scaling
+ */
+void iwl_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 sta_id)
+{
+	int i, j;
+	struct ieee80211_hw *hw = priv->hw;
+	struct ieee80211_conf *conf = &priv->hw->conf;
+	struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
+	struct iwl_station_priv *sta_priv;
+	struct iwl_lq_sta *lq_sta;
+	struct ieee80211_supported_band *sband;
+	unsigned long supp; /* must be unsigned long for for_each_set_bit */
+
+	sta_priv = (struct iwl_station_priv *) sta->drv_priv;
+	lq_sta = &sta_priv->lq_sta;
+	sband = hw->wiphy->bands[conf->channel->band];
+
+
+	lq_sta->lq.sta_id = sta_id;
+
+	for (j = 0; j < LQ_SIZE; j++)
+		for (i = 0; i < IWL_RATE_COUNT; i++)
+			rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
+
+	lq_sta->flush_timer = 0;
+	lq_sta->supp_rates = sta->supp_rates[sband->band];
+	for (j = 0; j < LQ_SIZE; j++)
+		for (i = 0; i < IWL_RATE_COUNT; i++)
+			rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
+
+	IWL_DEBUG_RATE(priv, "LQ: *** rate scale station global init for station %d ***\n",
+		       sta_id);
+	/* TODO: what is a good starting rate for STA? About middle? Maybe not
+	 * the lowest or the highest rate.. Could consider using RSSI from
+	 * previous packets? Need to have IEEE 802.1X auth succeed immediately
+	 * after assoc.. */
+
+	lq_sta->is_dup = 0;
+	lq_sta->max_rate_idx = -1;
+	lq_sta->missed_rate_counter = IWL_MISSED_RATE_MAX;
+	lq_sta->is_green = rs_use_green(sta);
+	lq_sta->band = sband->band;
+	/*
+	 * active legacy rates as per supported rates bitmap
+	 */
+	supp = sta->supp_rates[sband->band];
+	lq_sta->active_legacy_rate = 0;
+	for_each_set_bit(i, &supp, BITS_PER_LONG)
+		lq_sta->active_legacy_rate |= BIT(sband->bitrates[i].hw_value);
+
+	/*
+	 * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3),
+	 * supp_rates[] does not; shift to convert format, force 9 MBits off.
+	 */
+	lq_sta->active_siso_rate = ht_cap->mcs.rx_mask[0] << 1;
+	lq_sta->active_siso_rate |= ht_cap->mcs.rx_mask[0] & 0x1;
+	lq_sta->active_siso_rate &= ~((u16)0x2);
+	lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE;
+
+	/* Same here */
+	lq_sta->active_mimo2_rate = ht_cap->mcs.rx_mask[1] << 1;
+	lq_sta->active_mimo2_rate |= ht_cap->mcs.rx_mask[1] & 0x1;
+	lq_sta->active_mimo2_rate &= ~((u16)0x2);
+	lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE;
+
+	lq_sta->active_mimo3_rate = ht_cap->mcs.rx_mask[2] << 1;
+	lq_sta->active_mimo3_rate |= ht_cap->mcs.rx_mask[2] & 0x1;
+	lq_sta->active_mimo3_rate &= ~((u16)0x2);
+	lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE;
+
+	IWL_DEBUG_RATE(priv, "SISO-RATE=%X MIMO2-RATE=%X MIMO3-RATE=%X\n",
+		     lq_sta->active_siso_rate,
+		     lq_sta->active_mimo2_rate,
+		     lq_sta->active_mimo3_rate);
+
+	/* These values will be overridden later */
+	lq_sta->lq.general_params.single_stream_ant_msk =
+		first_antenna(priv->eeprom_data->valid_tx_ant);
+	lq_sta->lq.general_params.dual_stream_ant_msk =
+		priv->eeprom_data->valid_tx_ant &
+		~first_antenna(priv->eeprom_data->valid_tx_ant);
+	if (!lq_sta->lq.general_params.dual_stream_ant_msk) {
+		lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB;
+	} else if (num_of_ant(priv->eeprom_data->valid_tx_ant) == 2) {
+		lq_sta->lq.general_params.dual_stream_ant_msk =
+			priv->eeprom_data->valid_tx_ant;
+	}
+
+	/* as default allow aggregation for all tids */
+	lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID;
+	lq_sta->drv = priv;
+
+	/* Set last_txrate_idx to lowest rate */
+	lq_sta->last_txrate_idx = rate_lowest_index(sband, sta);
+	if (sband->band == IEEE80211_BAND_5GHZ)
+		lq_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE;
+	lq_sta->is_agg = 0;
+#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
+	priv->tm_fixed_rate = 0;
+#endif
+#ifdef CONFIG_MAC80211_DEBUGFS
+	lq_sta->dbg_fixed_rate = 0;
+#endif
+
+	rs_initialize_lq(priv, sta, lq_sta);
+}
+
+static void rs_fill_link_cmd(struct iwl_priv *priv,
+			     struct iwl_lq_sta *lq_sta, u32 new_rate)
+{
+	struct iwl_scale_tbl_info tbl_type;
+	int index = 0;
+	int rate_idx;
+	int repeat_rate = 0;
+	u8 ant_toggle_cnt = 0;
+	u8 use_ht_possible = 1;
+	u8 valid_tx_ant = 0;
+	struct iwl_station_priv *sta_priv =
+		container_of(lq_sta, struct iwl_station_priv, lq_sta);
+	struct iwl_link_quality_cmd *lq_cmd = &lq_sta->lq;
+
+	/* Override starting rate (index 0) if needed for debug purposes */
+	rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
+
+	/* Interpret new_rate (rate_n_flags) */
+	rs_get_tbl_info_from_mcs(new_rate, lq_sta->band,
+				  &tbl_type, &rate_idx);
+
+	if (priv && priv->bt_full_concurrent) {
+		/* 1x1 only */
+		tbl_type.ant_type =
+			first_antenna(priv->eeprom_data->valid_tx_ant);
+	}
+
+	/* How many times should we repeat the initial rate? */
+	if (is_legacy(tbl_type.lq_type)) {
+		ant_toggle_cnt = 1;
+		repeat_rate = IWL_NUMBER_TRY;
+	} else {
+		repeat_rate = min(IWL_HT_NUMBER_TRY,
+				  LINK_QUAL_AGG_DISABLE_START_DEF - 1);
+	}
+
+	lq_cmd->general_params.mimo_delimiter =
+			is_mimo(tbl_type.lq_type) ? 1 : 0;
+
+	/* Fill 1st table entry (index 0) */
+	lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate);
+
+	if (num_of_ant(tbl_type.ant_type) == 1) {
+		lq_cmd->general_params.single_stream_ant_msk =
+						tbl_type.ant_type;
+	} else if (num_of_ant(tbl_type.ant_type) == 2) {
+		lq_cmd->general_params.dual_stream_ant_msk =
+						tbl_type.ant_type;
+	} /* otherwise we don't modify the existing value */
+
+	index++;
+	repeat_rate--;
+	if (priv) {
+		if (priv->bt_full_concurrent)
+			valid_tx_ant = ANT_A;
+		else
+			valid_tx_ant = priv->eeprom_data->valid_tx_ant;
+	}
+
+	/* Fill rest of rate table */
+	while (index < LINK_QUAL_MAX_RETRY_NUM) {
+		/* Repeat initial/next rate.
+		 * For legacy IWL_NUMBER_TRY == 1, this loop will not execute.
+		 * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */
+		while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) {
+			if (is_legacy(tbl_type.lq_type)) {
+				if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
+					ant_toggle_cnt++;
+				else if (priv &&
+					 rs_toggle_antenna(valid_tx_ant,
+							&new_rate, &tbl_type))
+					ant_toggle_cnt = 1;
+			}
+
+			/* Override next rate if needed for debug purposes */
+			rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
+
+			/* Fill next table entry */
+			lq_cmd->rs_table[index].rate_n_flags =
+					cpu_to_le32(new_rate);
+			repeat_rate--;
+			index++;
+		}
+
+		rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type,
+						&rate_idx);
+
+		if (priv && priv->bt_full_concurrent) {
+			/* 1x1 only */
+			tbl_type.ant_type =
+			    first_antenna(priv->eeprom_data->valid_tx_ant);
+		}
+
+		/* Indicate to uCode which entries might be MIMO.
+		 * If initial rate was MIMO, this will finally end up
+		 * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */
+		if (is_mimo(tbl_type.lq_type))
+			lq_cmd->general_params.mimo_delimiter = index;
+
+		/* Get next rate */
+		new_rate = rs_get_lower_rate(lq_sta, &tbl_type, rate_idx,
+					     use_ht_possible);
+
+		/* How many times should we repeat the next rate? */
+		if (is_legacy(tbl_type.lq_type)) {
+			if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
+				ant_toggle_cnt++;
+			else if (priv &&
+				 rs_toggle_antenna(valid_tx_ant,
+						   &new_rate, &tbl_type))
+				ant_toggle_cnt = 1;
+
+			repeat_rate = IWL_NUMBER_TRY;
+		} else {
+			repeat_rate = IWL_HT_NUMBER_TRY;
+		}
+
+		/* Don't allow HT rates after next pass.
+		 * rs_get_lower_rate() will change type to LQ_A or LQ_G. */
+		use_ht_possible = 0;
+
+		/* Override next rate if needed for debug purposes */
+		rs_dbgfs_set_mcs(lq_sta, &new_rate, index);
+
+		/* Fill next table entry */
+		lq_cmd->rs_table[index].rate_n_flags = cpu_to_le32(new_rate);
+
+		index++;
+		repeat_rate--;
+	}
+
+	lq_cmd->agg_params.agg_frame_cnt_limit =
+		sta_priv->max_agg_bufsize ?: LINK_QUAL_AGG_FRAME_LIMIT_DEF;
+	lq_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
+
+	lq_cmd->agg_params.agg_time_limit =
+		cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
+	/*
+	 * overwrite if needed, pass aggregation time limit
+	 * to uCode in uSec
+	 */
+	if (priv && priv->cfg->bt_params &&
+	    priv->cfg->bt_params->agg_time_limit &&
+	    priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)
+		lq_cmd->agg_params.agg_time_limit =
+			cpu_to_le16(priv->cfg->bt_params->agg_time_limit);
+}
+
+static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
+{
+	return hw->priv;
+}
+/* rate scale requires free function to be implemented */
+static void rs_free(void *priv_rate)
+{
+	return;
+}
+
+static void rs_free_sta(void *priv_r, struct ieee80211_sta *sta,
+			void *priv_sta)
+{
+	struct iwl_op_mode *op_mode __maybe_unused = priv_r;
+	struct iwl_priv *priv __maybe_unused = IWL_OP_MODE_GET_DVM(op_mode);
+
+	IWL_DEBUG_RATE(priv, "enter\n");
+	IWL_DEBUG_RATE(priv, "leave\n");
+}
+
+#ifdef CONFIG_MAC80211_DEBUGFS
+static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta,
+			     u32 *rate_n_flags, int index)
+{
+	struct iwl_priv *priv;
+	u8 valid_tx_ant;
+	u8 ant_sel_tx;
+
+	priv = lq_sta->drv;
+	valid_tx_ant = priv->eeprom_data->valid_tx_ant;
+	if (lq_sta->dbg_fixed_rate) {
+		ant_sel_tx =
+		  ((lq_sta->dbg_fixed_rate & RATE_MCS_ANT_ABC_MSK)
+		  >> RATE_MCS_ANT_POS);
+		if ((valid_tx_ant & ant_sel_tx) == ant_sel_tx) {
+			*rate_n_flags = lq_sta->dbg_fixed_rate;
+			IWL_DEBUG_RATE(priv, "Fixed rate ON\n");
+		} else {
+			lq_sta->dbg_fixed_rate = 0;
+			IWL_ERR(priv,
+			    "Invalid antenna selection 0x%X, Valid is 0x%X\n",
+			    ant_sel_tx, valid_tx_ant);
+			IWL_DEBUG_RATE(priv, "Fixed rate OFF\n");
+		}
+	} else {
+		IWL_DEBUG_RATE(priv, "Fixed rate OFF\n");
+	}
+}
+
+static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file,
+			const char __user *user_buf, size_t count, loff_t *ppos)
+{
+	struct iwl_lq_sta *lq_sta = file->private_data;
+	struct iwl_priv *priv;
+	char buf[64];
+	size_t buf_size;
+	u32 parsed_rate;
+
+
+	priv = lq_sta->drv;
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) -  1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+
+	if (sscanf(buf, "%x", &parsed_rate) == 1)
+		lq_sta->dbg_fixed_rate = parsed_rate;
+	else
+		lq_sta->dbg_fixed_rate = 0;
+
+	rs_program_fix_rate(priv, lq_sta);
+
+	return count;
+}
+
+static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file,
+			char __user *user_buf, size_t count, loff_t *ppos)
+{
+	char *buff;
+	int desc = 0;
+	int i = 0;
+	int index = 0;
+	ssize_t ret;
+
+	struct iwl_lq_sta *lq_sta = file->private_data;
+	struct iwl_priv *priv;
+	struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+
+	priv = lq_sta->drv;
+	buff = kmalloc(1024, GFP_KERNEL);
+	if (!buff)
+		return -ENOMEM;
+
+	desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id);
+	desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n",
+			lq_sta->total_failed, lq_sta->total_success,
+			lq_sta->active_legacy_rate);
+	desc += sprintf(buff+desc, "fixed rate 0x%X\n",
+			lq_sta->dbg_fixed_rate);
+	desc += sprintf(buff+desc, "valid_tx_ant %s%s%s\n",
+	    (priv->eeprom_data->valid_tx_ant & ANT_A) ? "ANT_A," : "",
+	    (priv->eeprom_data->valid_tx_ant & ANT_B) ? "ANT_B," : "",
+	    (priv->eeprom_data->valid_tx_ant & ANT_C) ? "ANT_C" : "");
+	desc += sprintf(buff+desc, "lq type %s\n",
+	   (is_legacy(tbl->lq_type)) ? "legacy" : "HT");
+	if (is_Ht(tbl->lq_type)) {
+		desc += sprintf(buff+desc, " %s",
+		   (is_siso(tbl->lq_type)) ? "SISO" :
+		   ((is_mimo2(tbl->lq_type)) ? "MIMO2" : "MIMO3"));
+		   desc += sprintf(buff+desc, " %s",
+		   (tbl->is_ht40) ? "40MHz" : "20MHz");
+		   desc += sprintf(buff+desc, " %s %s %s\n", (tbl->is_SGI) ? "SGI" : "",
+		   (lq_sta->is_green) ? "GF enabled" : "",
+		   (lq_sta->is_agg) ? "AGG on" : "");
+	}
+	desc += sprintf(buff+desc, "last tx rate=0x%X\n",
+		lq_sta->last_rate_n_flags);
+	desc += sprintf(buff+desc, "general:"
+		"flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n",
+		lq_sta->lq.general_params.flags,
+		lq_sta->lq.general_params.mimo_delimiter,
+		lq_sta->lq.general_params.single_stream_ant_msk,
+		lq_sta->lq.general_params.dual_stream_ant_msk);
+
+	desc += sprintf(buff+desc, "agg:"
+			"time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n",
+			le16_to_cpu(lq_sta->lq.agg_params.agg_time_limit),
+			lq_sta->lq.agg_params.agg_dis_start_th,
+			lq_sta->lq.agg_params.agg_frame_cnt_limit);
+
+	desc += sprintf(buff+desc,
+			"Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n",
+			lq_sta->lq.general_params.start_rate_index[0],
+			lq_sta->lq.general_params.start_rate_index[1],
+			lq_sta->lq.general_params.start_rate_index[2],
+			lq_sta->lq.general_params.start_rate_index[3]);
+
+	for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) {
+		index = iwl_hwrate_to_plcp_idx(
+			le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags));
+		if (is_legacy(tbl->lq_type)) {
+			desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps\n",
+				i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags),
+				iwl_rate_mcs[index].mbps);
+		} else {
+			desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps (%s)\n",
+				i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags),
+				iwl_rate_mcs[index].mbps, iwl_rate_mcs[index].mcs);
+		}
+	}
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
+	kfree(buff);
+	return ret;
+}
+
+static const struct file_operations rs_sta_dbgfs_scale_table_ops = {
+	.write = rs_sta_dbgfs_scale_table_write,
+	.read = rs_sta_dbgfs_scale_table_read,
+	.open = simple_open,
+	.llseek = default_llseek,
+};
+static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file,
+			char __user *user_buf, size_t count, loff_t *ppos)
+{
+	char *buff;
+	int desc = 0;
+	int i, j;
+	ssize_t ret;
+
+	struct iwl_lq_sta *lq_sta = file->private_data;
+
+	buff = kmalloc(1024, GFP_KERNEL);
+	if (!buff)
+		return -ENOMEM;
+
+	for (i = 0; i < LQ_SIZE; i++) {
+		desc += sprintf(buff+desc,
+				"%s type=%d SGI=%d HT40=%d DUP=%d GF=%d\n"
+				"rate=0x%X\n",
+				lq_sta->active_tbl == i ? "*" : "x",
+				lq_sta->lq_info[i].lq_type,
+				lq_sta->lq_info[i].is_SGI,
+				lq_sta->lq_info[i].is_ht40,
+				lq_sta->lq_info[i].is_dup,
+				lq_sta->is_green,
+				lq_sta->lq_info[i].current_rate);
+		for (j = 0; j < IWL_RATE_COUNT; j++) {
+			desc += sprintf(buff+desc,
+				"counter=%d success=%d %%=%d\n",
+				lq_sta->lq_info[i].win[j].counter,
+				lq_sta->lq_info[i].win[j].success_counter,
+				lq_sta->lq_info[i].win[j].success_ratio);
+		}
+	}
+	ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
+	kfree(buff);
+	return ret;
+}
+
+static const struct file_operations rs_sta_dbgfs_stats_table_ops = {
+	.read = rs_sta_dbgfs_stats_table_read,
+	.open = simple_open,
+	.llseek = default_llseek,
+};
+
+static ssize_t rs_sta_dbgfs_rate_scale_data_read(struct file *file,
+			char __user *user_buf, size_t count, loff_t *ppos)
+{
+	struct iwl_lq_sta *lq_sta = file->private_data;
+	struct iwl_scale_tbl_info *tbl = &lq_sta->lq_info[lq_sta->active_tbl];
+	char buff[120];
+	int desc = 0;
+
+	if (is_Ht(tbl->lq_type))
+		desc += sprintf(buff+desc,
+				"Bit Rate= %d Mb/s\n",
+				tbl->expected_tpt[lq_sta->last_txrate_idx]);
+	else
+		desc += sprintf(buff+desc,
+				"Bit Rate= %d Mb/s\n",
+				iwl_rates[lq_sta->last_txrate_idx].ieee >> 1);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buff, desc);
+}
+
+static const struct file_operations rs_sta_dbgfs_rate_scale_data_ops = {
+	.read = rs_sta_dbgfs_rate_scale_data_read,
+	.open = simple_open,
+	.llseek = default_llseek,
+};
+
+static void rs_add_debugfs(void *priv, void *priv_sta,
+					struct dentry *dir)
+{
+	struct iwl_lq_sta *lq_sta = priv_sta;
+	lq_sta->rs_sta_dbgfs_scale_table_file =
+		debugfs_create_file("rate_scale_table", S_IRUSR | S_IWUSR, dir,
+				lq_sta, &rs_sta_dbgfs_scale_table_ops);
+	lq_sta->rs_sta_dbgfs_stats_table_file =
+		debugfs_create_file("rate_stats_table", S_IRUSR, dir,
+			lq_sta, &rs_sta_dbgfs_stats_table_ops);
+	lq_sta->rs_sta_dbgfs_rate_scale_data_file =
+		debugfs_create_file("rate_scale_data", S_IRUSR, dir,
+			lq_sta, &rs_sta_dbgfs_rate_scale_data_ops);
+	lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file =
+		debugfs_create_u8("tx_agg_tid_enable", S_IRUSR | S_IWUSR, dir,
+		&lq_sta->tx_agg_tid_en);
+
+}
+
+static void rs_remove_debugfs(void *priv, void *priv_sta)
+{
+	struct iwl_lq_sta *lq_sta = priv_sta;
+	debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file);
+	debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file);
+	debugfs_remove(lq_sta->rs_sta_dbgfs_rate_scale_data_file);
+	debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file);
+}
+#endif
+
+/*
+ * Initialization of rate scaling information is done by driver after
+ * the station is added. Since mac80211 calls this function before a
+ * station is added we ignore it.
+ */
+static void rs_rate_init_stub(void *priv_r, struct ieee80211_supported_band *sband,
+			 struct ieee80211_sta *sta, void *priv_sta)
+{
+}
+static struct rate_control_ops rs_ops = {
+	.module = NULL,
+	.name = RS_NAME,
+	.tx_status = rs_tx_status,
+	.get_rate = rs_get_rate,
+	.rate_init = rs_rate_init_stub,
+	.alloc = rs_alloc,
+	.free = rs_free,
+	.alloc_sta = rs_alloc_sta,
+	.free_sta = rs_free_sta,
+#ifdef CONFIG_MAC80211_DEBUGFS
+	.add_sta_debugfs = rs_add_debugfs,
+	.remove_sta_debugfs = rs_remove_debugfs,
+#endif
+};
+
+int iwlagn_rate_control_register(void)
+{
+	return ieee80211_rate_control_register(&rs_ops);
+}
+
+void iwlagn_rate_control_unregister(void)
+{
+	ieee80211_rate_control_unregister(&rs_ops);
+}
+
diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.h b/drivers/net/wireless/iwlwifi/dvm/rs.h
new file mode 100644
index 00000000000..ad3aea8f626
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/rs.h
@@ -0,0 +1,433 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#ifndef __iwl_agn_rs_h__
+#define __iwl_agn_rs_h__
+
+#include <net/mac80211.h>
+
+#include "iwl-config.h"
+
+#include "commands.h"
+
+struct iwl_rate_info {
+	u8 plcp;	/* uCode API:  IWL_RATE_6M_PLCP, etc. */
+	u8 plcp_siso;	/* uCode API:  IWL_RATE_SISO_6M_PLCP, etc. */
+	u8 plcp_mimo2;	/* uCode API:  IWL_RATE_MIMO2_6M_PLCP, etc. */
+	u8 plcp_mimo3;  /* uCode API:  IWL_RATE_MIMO3_6M_PLCP, etc. */
+	u8 ieee;	/* MAC header:  IWL_RATE_6M_IEEE, etc. */
+	u8 prev_ieee;    /* previous rate in IEEE speeds */
+	u8 next_ieee;    /* next rate in IEEE speeds */
+	u8 prev_rs;      /* previous rate used in rs algo */
+	u8 next_rs;      /* next rate used in rs algo */
+	u8 prev_rs_tgg;  /* previous rate used in TGG rs algo */
+	u8 next_rs_tgg;  /* next rate used in TGG rs algo */
+};
+
+/*
+ * These serve as indexes into
+ * struct iwl_rate_info iwl_rates[IWL_RATE_COUNT];
+ */
+enum {
+	IWL_RATE_1M_INDEX = 0,
+	IWL_RATE_2M_INDEX,
+	IWL_RATE_5M_INDEX,
+	IWL_RATE_11M_INDEX,
+	IWL_RATE_6M_INDEX,
+	IWL_RATE_9M_INDEX,
+	IWL_RATE_12M_INDEX,
+	IWL_RATE_18M_INDEX,
+	IWL_RATE_24M_INDEX,
+	IWL_RATE_36M_INDEX,
+	IWL_RATE_48M_INDEX,
+	IWL_RATE_54M_INDEX,
+	IWL_RATE_60M_INDEX,
+	IWL_RATE_COUNT, /*FIXME:RS:change to IWL_RATE_INDEX_COUNT,*/
+	IWL_RATE_COUNT_LEGACY = IWL_RATE_COUNT - 1,	/* Excluding 60M */
+	IWL_RATE_INVM_INDEX = IWL_RATE_COUNT,
+	IWL_RATE_INVALID = IWL_RATE_COUNT,
+};
+
+enum {
+	IWL_RATE_6M_INDEX_TABLE = 0,
+	IWL_RATE_9M_INDEX_TABLE,
+	IWL_RATE_12M_INDEX_TABLE,
+	IWL_RATE_18M_INDEX_TABLE,
+	IWL_RATE_24M_INDEX_TABLE,
+	IWL_RATE_36M_INDEX_TABLE,
+	IWL_RATE_48M_INDEX_TABLE,
+	IWL_RATE_54M_INDEX_TABLE,
+	IWL_RATE_1M_INDEX_TABLE,
+	IWL_RATE_2M_INDEX_TABLE,
+	IWL_RATE_5M_INDEX_TABLE,
+	IWL_RATE_11M_INDEX_TABLE,
+	IWL_RATE_INVM_INDEX_TABLE = IWL_RATE_INVM_INDEX - 1,
+};
+
+enum {
+	IWL_FIRST_OFDM_RATE = IWL_RATE_6M_INDEX,
+	IWL_LAST_OFDM_RATE = IWL_RATE_60M_INDEX,
+	IWL_FIRST_CCK_RATE = IWL_RATE_1M_INDEX,
+	IWL_LAST_CCK_RATE = IWL_RATE_11M_INDEX,
+};
+
+/* #define vs. enum to keep from defaulting to 'large integer' */
+#define	IWL_RATE_6M_MASK   (1 << IWL_RATE_6M_INDEX)
+#define	IWL_RATE_9M_MASK   (1 << IWL_RATE_9M_INDEX)
+#define	IWL_RATE_12M_MASK  (1 << IWL_RATE_12M_INDEX)
+#define	IWL_RATE_18M_MASK  (1 << IWL_RATE_18M_INDEX)
+#define	IWL_RATE_24M_MASK  (1 << IWL_RATE_24M_INDEX)
+#define	IWL_RATE_36M_MASK  (1 << IWL_RATE_36M_INDEX)
+#define	IWL_RATE_48M_MASK  (1 << IWL_RATE_48M_INDEX)
+#define	IWL_RATE_54M_MASK  (1 << IWL_RATE_54M_INDEX)
+#define IWL_RATE_60M_MASK  (1 << IWL_RATE_60M_INDEX)
+#define	IWL_RATE_1M_MASK   (1 << IWL_RATE_1M_INDEX)
+#define	IWL_RATE_2M_MASK   (1 << IWL_RATE_2M_INDEX)
+#define	IWL_RATE_5M_MASK   (1 << IWL_RATE_5M_INDEX)
+#define	IWL_RATE_11M_MASK  (1 << IWL_RATE_11M_INDEX)
+
+/* uCode API values for legacy bit rates, both OFDM and CCK */
+enum {
+	IWL_RATE_6M_PLCP  = 13,
+	IWL_RATE_9M_PLCP  = 15,
+	IWL_RATE_12M_PLCP = 5,
+	IWL_RATE_18M_PLCP = 7,
+	IWL_RATE_24M_PLCP = 9,
+	IWL_RATE_36M_PLCP = 11,
+	IWL_RATE_48M_PLCP = 1,
+	IWL_RATE_54M_PLCP = 3,
+	IWL_RATE_60M_PLCP = 3,/*FIXME:RS:should be removed*/
+	IWL_RATE_1M_PLCP  = 10,
+	IWL_RATE_2M_PLCP  = 20,
+	IWL_RATE_5M_PLCP  = 55,
+	IWL_RATE_11M_PLCP = 110,
+	/*FIXME:RS:change to IWL_RATE_LEGACY_??M_PLCP */
+	/*FIXME:RS:add IWL_RATE_LEGACY_INVM_PLCP = 0,*/
+};
+
+/* uCode API values for OFDM high-throughput (HT) bit rates */
+enum {
+	IWL_RATE_SISO_6M_PLCP = 0,
+	IWL_RATE_SISO_12M_PLCP = 1,
+	IWL_RATE_SISO_18M_PLCP = 2,
+	IWL_RATE_SISO_24M_PLCP = 3,
+	IWL_RATE_SISO_36M_PLCP = 4,
+	IWL_RATE_SISO_48M_PLCP = 5,
+	IWL_RATE_SISO_54M_PLCP = 6,
+	IWL_RATE_SISO_60M_PLCP = 7,
+	IWL_RATE_MIMO2_6M_PLCP  = 0x8,
+	IWL_RATE_MIMO2_12M_PLCP = 0x9,
+	IWL_RATE_MIMO2_18M_PLCP = 0xa,
+	IWL_RATE_MIMO2_24M_PLCP = 0xb,
+	IWL_RATE_MIMO2_36M_PLCP = 0xc,
+	IWL_RATE_MIMO2_48M_PLCP = 0xd,
+	IWL_RATE_MIMO2_54M_PLCP = 0xe,
+	IWL_RATE_MIMO2_60M_PLCP = 0xf,
+	IWL_RATE_MIMO3_6M_PLCP  = 0x10,
+	IWL_RATE_MIMO3_12M_PLCP = 0x11,
+	IWL_RATE_MIMO3_18M_PLCP = 0x12,
+	IWL_RATE_MIMO3_24M_PLCP = 0x13,
+	IWL_RATE_MIMO3_36M_PLCP = 0x14,
+	IWL_RATE_MIMO3_48M_PLCP = 0x15,
+	IWL_RATE_MIMO3_54M_PLCP = 0x16,
+	IWL_RATE_MIMO3_60M_PLCP = 0x17,
+	IWL_RATE_SISO_INVM_PLCP,
+	IWL_RATE_MIMO2_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP,
+	IWL_RATE_MIMO3_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP,
+};
+
+/* MAC header values for bit rates */
+enum {
+	IWL_RATE_6M_IEEE  = 12,
+	IWL_RATE_9M_IEEE  = 18,
+	IWL_RATE_12M_IEEE = 24,
+	IWL_RATE_18M_IEEE = 36,
+	IWL_RATE_24M_IEEE = 48,
+	IWL_RATE_36M_IEEE = 72,
+	IWL_RATE_48M_IEEE = 96,
+	IWL_RATE_54M_IEEE = 108,
+	IWL_RATE_60M_IEEE = 120,
+	IWL_RATE_1M_IEEE  = 2,
+	IWL_RATE_2M_IEEE  = 4,
+	IWL_RATE_5M_IEEE  = 11,
+	IWL_RATE_11M_IEEE = 22,
+};
+
+#define IWL_RATES_MASK ((1 << IWL_RATE_COUNT) - 1)
+
+#define IWL_INVALID_VALUE    -1
+
+#define IWL_MIN_RSSI_VAL                 -100
+#define IWL_MAX_RSSI_VAL                    0
+
+/* These values specify how many Tx frame attempts before
+ * searching for a new modulation mode */
+#define IWL_LEGACY_FAILURE_LIMIT	160
+#define IWL_LEGACY_SUCCESS_LIMIT	480
+#define IWL_LEGACY_TABLE_COUNT		160
+
+#define IWL_NONE_LEGACY_FAILURE_LIMIT	400
+#define IWL_NONE_LEGACY_SUCCESS_LIMIT	4500
+#define IWL_NONE_LEGACY_TABLE_COUNT	1500
+
+/* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */
+#define IWL_RS_GOOD_RATIO		12800	/* 100% */
+#define IWL_RATE_SCALE_SWITCH		10880	/*  85% */
+#define IWL_RATE_HIGH_TH		10880	/*  85% */
+#define IWL_RATE_INCREASE_TH		6400	/*  50% */
+#define IWL_RATE_DECREASE_TH		1920	/*  15% */
+
+/* possible actions when in legacy mode */
+#define IWL_LEGACY_SWITCH_ANTENNA1      0
+#define IWL_LEGACY_SWITCH_ANTENNA2      1
+#define IWL_LEGACY_SWITCH_SISO          2
+#define IWL_LEGACY_SWITCH_MIMO2_AB      3
+#define IWL_LEGACY_SWITCH_MIMO2_AC      4
+#define IWL_LEGACY_SWITCH_MIMO2_BC      5
+#define IWL_LEGACY_SWITCH_MIMO3_ABC     6
+
+/* possible actions when in siso mode */
+#define IWL_SISO_SWITCH_ANTENNA1        0
+#define IWL_SISO_SWITCH_ANTENNA2        1
+#define IWL_SISO_SWITCH_MIMO2_AB        2
+#define IWL_SISO_SWITCH_MIMO2_AC        3
+#define IWL_SISO_SWITCH_MIMO2_BC        4
+#define IWL_SISO_SWITCH_GI              5
+#define IWL_SISO_SWITCH_MIMO3_ABC       6
+
+
+/* possible actions when in mimo mode */
+#define IWL_MIMO2_SWITCH_ANTENNA1       0
+#define IWL_MIMO2_SWITCH_ANTENNA2       1
+#define IWL_MIMO2_SWITCH_SISO_A         2
+#define IWL_MIMO2_SWITCH_SISO_B         3
+#define IWL_MIMO2_SWITCH_SISO_C         4
+#define IWL_MIMO2_SWITCH_GI             5
+#define IWL_MIMO2_SWITCH_MIMO3_ABC      6
+
+
+/* possible actions when in mimo3 mode */
+#define IWL_MIMO3_SWITCH_ANTENNA1       0
+#define IWL_MIMO3_SWITCH_ANTENNA2       1
+#define IWL_MIMO3_SWITCH_SISO_A         2
+#define IWL_MIMO3_SWITCH_SISO_B         3
+#define IWL_MIMO3_SWITCH_SISO_C         4
+#define IWL_MIMO3_SWITCH_MIMO2_AB       5
+#define IWL_MIMO3_SWITCH_MIMO2_AC       6
+#define IWL_MIMO3_SWITCH_MIMO2_BC       7
+#define IWL_MIMO3_SWITCH_GI             8
+
+
+#define IWL_MAX_11N_MIMO3_SEARCH IWL_MIMO3_SWITCH_GI
+#define IWL_MAX_SEARCH IWL_MIMO2_SWITCH_MIMO3_ABC
+
+/*FIXME:RS:add possible actions for MIMO3*/
+
+#define IWL_ACTION_LIMIT		3	/* # possible actions */
+
+#define LQ_SIZE		2	/* 2 mode tables:  "Active" and "Search" */
+
+/* load per tid defines for A-MPDU activation */
+#define IWL_AGG_TPT_THREHOLD	0
+#define IWL_AGG_LOAD_THRESHOLD	10
+#define IWL_AGG_ALL_TID		0xff
+#define TID_QUEUE_CELL_SPACING	50	/*mS */
+#define TID_QUEUE_MAX_SIZE	20
+#define TID_ROUND_VALUE		5	/* mS */
+
+#define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING)
+#define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y))
+
+extern const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT];
+
+enum iwl_table_type {
+	LQ_NONE,
+	LQ_G,		/* legacy types */
+	LQ_A,
+	LQ_SISO,	/* high-throughput types */
+	LQ_MIMO2,
+	LQ_MIMO3,
+	LQ_MAX,
+};
+
+#define is_legacy(tbl) (((tbl) == LQ_G) || ((tbl) == LQ_A))
+#define is_siso(tbl) ((tbl) == LQ_SISO)
+#define is_mimo2(tbl) ((tbl) == LQ_MIMO2)
+#define is_mimo3(tbl) ((tbl) == LQ_MIMO3)
+#define is_mimo(tbl) (is_mimo2(tbl) || is_mimo3(tbl))
+#define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl))
+#define is_a_band(tbl) ((tbl) == LQ_A)
+#define is_g_and(tbl) ((tbl) == LQ_G)
+
+#define IWL_MAX_MCS_DISPLAY_SIZE	12
+
+struct iwl_rate_mcs_info {
+	char	mbps[IWL_MAX_MCS_DISPLAY_SIZE];
+	char	mcs[IWL_MAX_MCS_DISPLAY_SIZE];
+};
+
+/**
+ * struct iwl_rate_scale_data -- tx success history for one rate
+ */
+struct iwl_rate_scale_data {
+	u64 data;		/* bitmap of successful frames */
+	s32 success_counter;	/* number of frames successful */
+	s32 success_ratio;	/* per-cent * 128  */
+	s32 counter;		/* number of frames attempted */
+	s32 average_tpt;	/* success ratio * expected throughput */
+	unsigned long stamp;
+};
+
+/**
+ * struct iwl_scale_tbl_info -- tx params and success history for all rates
+ *
+ * There are two of these in struct iwl_lq_sta,
+ * one for "active", and one for "search".
+ */
+struct iwl_scale_tbl_info {
+	enum iwl_table_type lq_type;
+	u8 ant_type;
+	u8 is_SGI;	/* 1 = short guard interval */
+	u8 is_ht40;	/* 1 = 40 MHz channel width */
+	u8 is_dup;	/* 1 = duplicated data streams */
+	u8 action;	/* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */
+	u8 max_search;	/* maximun number of tables we can search */
+	s32 *expected_tpt;	/* throughput metrics; expected_tpt_G, etc. */
+	u32 current_rate;  /* rate_n_flags, uCode API format */
+	struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */
+};
+
+struct iwl_traffic_load {
+	unsigned long time_stamp;	/* age of the oldest statistics */
+	u32 packet_count[TID_QUEUE_MAX_SIZE];   /* packet count in this time
+						 * slice */
+	u32 total;			/* total num of packets during the
+					 * last TID_MAX_TIME_DIFF */
+	u8 queue_count;			/* number of queues that has
+					 * been used since the last cleanup */
+	u8 head;			/* start of the circular buffer */
+};
+
+/**
+ * struct iwl_lq_sta -- driver's rate scaling private structure
+ *
+ * Pointer to this gets passed back and forth between driver and mac80211.
+ */
+struct iwl_lq_sta {
+	u8 active_tbl;		/* index of active table, range 0-1 */
+	u8 enable_counter;	/* indicates HT mode */
+	u8 stay_in_tbl;		/* 1: disallow, 0: allow search for new mode */
+	u8 search_better_tbl;	/* 1: currently trying alternate mode */
+	s32 last_tpt;
+
+	/* The following determine when to search for a new mode */
+	u32 table_count_limit;
+	u32 max_failure_limit;	/* # failed frames before new search */
+	u32 max_success_limit;	/* # successful frames before new search */
+	u32 table_count;
+	u32 total_failed;	/* total failed frames, any/all rates */
+	u32 total_success;	/* total successful frames, any/all rates */
+	u64 flush_timer;	/* time staying in mode before new search */
+
+	u8 action_counter;	/* # mode-switch actions tried */
+	u8 is_green;
+	u8 is_dup;
+	enum ieee80211_band band;
+
+	/* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */
+	u32 supp_rates;
+	u16 active_legacy_rate;
+	u16 active_siso_rate;
+	u16 active_mimo2_rate;
+	u16 active_mimo3_rate;
+	s8 max_rate_idx;     /* Max rate set by user */
+	u8 missed_rate_counter;
+
+	struct iwl_link_quality_cmd lq;
+	struct iwl_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */
+	struct iwl_traffic_load load[IWL_MAX_TID_COUNT];
+	u8 tx_agg_tid_en;
+#ifdef CONFIG_MAC80211_DEBUGFS
+	struct dentry *rs_sta_dbgfs_scale_table_file;
+	struct dentry *rs_sta_dbgfs_stats_table_file;
+	struct dentry *rs_sta_dbgfs_rate_scale_data_file;
+	struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file;
+	u32 dbg_fixed_rate;
+#endif
+	struct iwl_priv *drv;
+
+	/* used to be in sta_info */
+	int last_txrate_idx;
+	/* last tx rate_n_flags */
+	u32 last_rate_n_flags;
+	/* packets destined for this STA are aggregated */
+	u8 is_agg;
+	/* BT traffic this sta was last updated in */
+	u8 last_bt_traffic;
+};
+
+static inline u8 num_of_ant(u8 mask)
+{
+	return  !!((mask) & ANT_A) +
+		!!((mask) & ANT_B) +
+		!!((mask) & ANT_C);
+}
+
+static inline u8 first_antenna(u8 mask)
+{
+	if (mask & ANT_A)
+		return ANT_A;
+	if (mask & ANT_B)
+		return ANT_B;
+	return ANT_C;
+}
+
+
+/* Initialize station's rate scaling information after adding station */
+extern void iwl_rs_rate_init(struct iwl_priv *priv,
+			     struct ieee80211_sta *sta, u8 sta_id);
+
+/**
+ * iwl_rate_control_register - Register the rate control algorithm callbacks
+ *
+ * Since the rate control algorithm is hardware specific, there is no need
+ * or reason to place it as a stand alone module.  The driver can call
+ * iwl_rate_control_register in order to register the rate control callbacks
+ * with the mac80211 subsystem.  This should be performed prior to calling
+ * ieee80211_register_hw
+ *
+ */
+extern int iwlagn_rate_control_register(void);
+
+/**
+ * iwl_rate_control_unregister - Unregister the rate control callbacks
+ *
+ * This should be called after calling ieee80211_unregister_hw, but before
+ * the driver is unloaded.
+ */
+extern void iwlagn_rate_control_unregister(void);
+
+#endif /* __iwl_agn__rs__ */
diff --git a/drivers/net/wireless/iwlwifi/dvm/rx.c b/drivers/net/wireless/iwlwifi/dvm/rx.c
new file mode 100644
index 00000000000..c1f7a18e08d
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/rx.c
@@ -0,0 +1,1164 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are derived from the ipw3945 project, as well
+ * as portionhelp of the ieee80211 subsystem header files.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#include <linux/etherdevice.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <net/mac80211.h>
+#include <asm/unaligned.h>
+#include "iwl-io.h"
+#include "dev.h"
+#include "calib.h"
+#include "agn.h"
+
+#define IWL_CMD_ENTRY(x) [x] = #x
+
+const char *iwl_dvm_cmd_strings[REPLY_MAX] = {
+	IWL_CMD_ENTRY(REPLY_ALIVE),
+	IWL_CMD_ENTRY(REPLY_ERROR),
+	IWL_CMD_ENTRY(REPLY_ECHO),
+	IWL_CMD_ENTRY(REPLY_RXON),
+	IWL_CMD_ENTRY(REPLY_RXON_ASSOC),
+	IWL_CMD_ENTRY(REPLY_QOS_PARAM),
+	IWL_CMD_ENTRY(REPLY_RXON_TIMING),
+	IWL_CMD_ENTRY(REPLY_ADD_STA),
+	IWL_CMD_ENTRY(REPLY_REMOVE_STA),
+	IWL_CMD_ENTRY(REPLY_REMOVE_ALL_STA),
+	IWL_CMD_ENTRY(REPLY_TXFIFO_FLUSH),
+	IWL_CMD_ENTRY(REPLY_WEPKEY),
+	IWL_CMD_ENTRY(REPLY_TX),
+	IWL_CMD_ENTRY(REPLY_LEDS_CMD),
+	IWL_CMD_ENTRY(REPLY_TX_LINK_QUALITY_CMD),
+	IWL_CMD_ENTRY(COEX_PRIORITY_TABLE_CMD),
+	IWL_CMD_ENTRY(COEX_MEDIUM_NOTIFICATION),
+	IWL_CMD_ENTRY(COEX_EVENT_CMD),
+	IWL_CMD_ENTRY(REPLY_QUIET_CMD),
+	IWL_CMD_ENTRY(REPLY_CHANNEL_SWITCH),
+	IWL_CMD_ENTRY(CHANNEL_SWITCH_NOTIFICATION),
+	IWL_CMD_ENTRY(REPLY_SPECTRUM_MEASUREMENT_CMD),
+	IWL_CMD_ENTRY(SPECTRUM_MEASURE_NOTIFICATION),
+	IWL_CMD_ENTRY(POWER_TABLE_CMD),
+	IWL_CMD_ENTRY(PM_SLEEP_NOTIFICATION),
+	IWL_CMD_ENTRY(PM_DEBUG_STATISTIC_NOTIFIC),
+	IWL_CMD_ENTRY(REPLY_SCAN_CMD),
+	IWL_CMD_ENTRY(REPLY_SCAN_ABORT_CMD),
+	IWL_CMD_ENTRY(SCAN_START_NOTIFICATION),
+	IWL_CMD_ENTRY(SCAN_RESULTS_NOTIFICATION),
+	IWL_CMD_ENTRY(SCAN_COMPLETE_NOTIFICATION),
+	IWL_CMD_ENTRY(BEACON_NOTIFICATION),
+	IWL_CMD_ENTRY(REPLY_TX_BEACON),
+	IWL_CMD_ENTRY(WHO_IS_AWAKE_NOTIFICATION),
+	IWL_CMD_ENTRY(QUIET_NOTIFICATION),
+	IWL_CMD_ENTRY(REPLY_TX_PWR_TABLE_CMD),
+	IWL_CMD_ENTRY(MEASURE_ABORT_NOTIFICATION),
+	IWL_CMD_ENTRY(REPLY_BT_CONFIG),
+	IWL_CMD_ENTRY(REPLY_STATISTICS_CMD),
+	IWL_CMD_ENTRY(STATISTICS_NOTIFICATION),
+	IWL_CMD_ENTRY(REPLY_CARD_STATE_CMD),
+	IWL_CMD_ENTRY(CARD_STATE_NOTIFICATION),
+	IWL_CMD_ENTRY(MISSED_BEACONS_NOTIFICATION),
+	IWL_CMD_ENTRY(REPLY_CT_KILL_CONFIG_CMD),
+	IWL_CMD_ENTRY(SENSITIVITY_CMD),
+	IWL_CMD_ENTRY(REPLY_PHY_CALIBRATION_CMD),
+	IWL_CMD_ENTRY(REPLY_RX_PHY_CMD),
+	IWL_CMD_ENTRY(REPLY_RX_MPDU_CMD),
+	IWL_CMD_ENTRY(REPLY_RX),
+	IWL_CMD_ENTRY(REPLY_COMPRESSED_BA),
+	IWL_CMD_ENTRY(CALIBRATION_CFG_CMD),
+	IWL_CMD_ENTRY(CALIBRATION_RES_NOTIFICATION),
+	IWL_CMD_ENTRY(CALIBRATION_COMPLETE_NOTIFICATION),
+	IWL_CMD_ENTRY(REPLY_TX_POWER_DBM_CMD),
+	IWL_CMD_ENTRY(TEMPERATURE_NOTIFICATION),
+	IWL_CMD_ENTRY(TX_ANT_CONFIGURATION_CMD),
+	IWL_CMD_ENTRY(REPLY_BT_COEX_PROFILE_NOTIF),
+	IWL_CMD_ENTRY(REPLY_BT_COEX_PRIO_TABLE),
+	IWL_CMD_ENTRY(REPLY_BT_COEX_PROT_ENV),
+	IWL_CMD_ENTRY(REPLY_WIPAN_PARAMS),
+	IWL_CMD_ENTRY(REPLY_WIPAN_RXON),
+	IWL_CMD_ENTRY(REPLY_WIPAN_RXON_TIMING),
+	IWL_CMD_ENTRY(REPLY_WIPAN_RXON_ASSOC),
+	IWL_CMD_ENTRY(REPLY_WIPAN_QOS_PARAM),
+	IWL_CMD_ENTRY(REPLY_WIPAN_WEPKEY),
+	IWL_CMD_ENTRY(REPLY_WIPAN_P2P_CHANNEL_SWITCH),
+	IWL_CMD_ENTRY(REPLY_WIPAN_NOA_NOTIFICATION),
+	IWL_CMD_ENTRY(REPLY_WIPAN_DEACTIVATION_COMPLETE),
+	IWL_CMD_ENTRY(REPLY_WOWLAN_PATTERNS),
+	IWL_CMD_ENTRY(REPLY_WOWLAN_WAKEUP_FILTER),
+	IWL_CMD_ENTRY(REPLY_WOWLAN_TSC_RSC_PARAMS),
+	IWL_CMD_ENTRY(REPLY_WOWLAN_TKIP_PARAMS),
+	IWL_CMD_ENTRY(REPLY_WOWLAN_KEK_KCK_MATERIAL),
+	IWL_CMD_ENTRY(REPLY_WOWLAN_GET_STATUS),
+	IWL_CMD_ENTRY(REPLY_D3_CONFIG),
+};
+#undef IWL_CMD_ENTRY
+
+/******************************************************************************
+ *
+ * Generic RX handler implementations
+ *
+ ******************************************************************************/
+
+static int iwlagn_rx_reply_error(struct iwl_priv *priv,
+			       struct iwl_rx_cmd_buffer *rxb,
+			       struct iwl_device_cmd *cmd)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl_error_resp *err_resp = (void *)pkt->data;
+
+	IWL_ERR(priv, "Error Reply type 0x%08X cmd REPLY_ERROR (0x%02X) "
+		"seq 0x%04X ser 0x%08X\n",
+		le32_to_cpu(err_resp->error_type),
+		err_resp->cmd_id,
+		le16_to_cpu(err_resp->bad_cmd_seq_num),
+		le32_to_cpu(err_resp->error_info));
+	return 0;
+}
+
+static int iwlagn_rx_csa(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb,
+			       struct iwl_device_cmd *cmd)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl_csa_notification *csa = (void *)pkt->data;
+	/*
+	 * MULTI-FIXME
+	 * See iwlagn_mac_channel_switch.
+	 */
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	struct iwl_rxon_cmd *rxon = (void *)&ctx->active;
+
+	if (!test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
+		return 0;
+
+	if (!le32_to_cpu(csa->status) && csa->channel == priv->switch_channel) {
+		rxon->channel = csa->channel;
+		ctx->staging.channel = csa->channel;
+		IWL_DEBUG_11H(priv, "CSA notif: channel %d\n",
+			      le16_to_cpu(csa->channel));
+		iwl_chswitch_done(priv, true);
+	} else {
+		IWL_ERR(priv, "CSA notif (fail) : channel %d\n",
+			le16_to_cpu(csa->channel));
+		iwl_chswitch_done(priv, false);
+	}
+	return 0;
+}
+
+
+static int iwlagn_rx_spectrum_measure_notif(struct iwl_priv *priv,
+					  struct iwl_rx_cmd_buffer *rxb,
+					  struct iwl_device_cmd *cmd)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl_spectrum_notification *report = (void *)pkt->data;
+
+	if (!report->state) {
+		IWL_DEBUG_11H(priv,
+			"Spectrum Measure Notification: Start\n");
+		return 0;
+	}
+
+	memcpy(&priv->measure_report, report, sizeof(*report));
+	priv->measurement_status |= MEASUREMENT_READY;
+	return 0;
+}
+
+static int iwlagn_rx_pm_sleep_notif(struct iwl_priv *priv,
+				  struct iwl_rx_cmd_buffer *rxb,
+				  struct iwl_device_cmd *cmd)
+{
+#ifdef CONFIG_IWLWIFI_DEBUG
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl_sleep_notification *sleep = (void *)pkt->data;
+	IWL_DEBUG_RX(priv, "sleep mode: %d, src: %d\n",
+		     sleep->pm_sleep_mode, sleep->pm_wakeup_src);
+#endif
+	return 0;
+}
+
+static int iwlagn_rx_pm_debug_statistics_notif(struct iwl_priv *priv,
+					     struct iwl_rx_cmd_buffer *rxb,
+					     struct iwl_device_cmd *cmd)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	u32 __maybe_unused len =
+		le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
+	IWL_DEBUG_RADIO(priv, "Dumping %d bytes of unhandled "
+			"notification for PM_DEBUG_STATISTIC_NOTIFIC:\n", len);
+	iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->data, len);
+	return 0;
+}
+
+static int iwlagn_rx_beacon_notif(struct iwl_priv *priv,
+				struct iwl_rx_cmd_buffer *rxb,
+				struct iwl_device_cmd *cmd)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwlagn_beacon_notif *beacon = (void *)pkt->data;
+#ifdef CONFIG_IWLWIFI_DEBUG
+	u16 status = le16_to_cpu(beacon->beacon_notify_hdr.status.status);
+	u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
+
+	IWL_DEBUG_RX(priv, "beacon status %#x, retries:%d ibssmgr:%d "
+		"tsf:0x%.8x%.8x rate:%d\n",
+		status & TX_STATUS_MSK,
+		beacon->beacon_notify_hdr.failure_frame,
+		le32_to_cpu(beacon->ibss_mgr_status),
+		le32_to_cpu(beacon->high_tsf),
+		le32_to_cpu(beacon->low_tsf), rate);
+#endif
+
+	priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
+
+	return 0;
+}
+
+/**
+ * iwl_good_plcp_health - checks for plcp error.
+ *
+ * When the plcp error is exceeding the thresholds, reset the radio
+ * to improve the throughput.
+ */
+static bool iwlagn_good_plcp_health(struct iwl_priv *priv,
+				 struct statistics_rx_phy *cur_ofdm,
+				 struct statistics_rx_ht_phy *cur_ofdm_ht,
+				 unsigned int msecs)
+{
+	int delta;
+	int threshold = priv->plcp_delta_threshold;
+
+	if (threshold == IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE) {
+		IWL_DEBUG_RADIO(priv, "plcp_err check disabled\n");
+		return true;
+	}
+
+	delta = le32_to_cpu(cur_ofdm->plcp_err) -
+		le32_to_cpu(priv->statistics.rx_ofdm.plcp_err) +
+		le32_to_cpu(cur_ofdm_ht->plcp_err) -
+		le32_to_cpu(priv->statistics.rx_ofdm_ht.plcp_err);
+
+	/* Can be negative if firmware reset statistics */
+	if (delta <= 0)
+		return true;
+
+	if ((delta * 100 / msecs) > threshold) {
+		IWL_DEBUG_RADIO(priv,
+				"plcp health threshold %u delta %d msecs %u\n",
+				threshold, delta, msecs);
+		return false;
+	}
+
+	return true;
+}
+
+int iwl_force_rf_reset(struct iwl_priv *priv, bool external)
+{
+	struct iwl_rf_reset *rf_reset;
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return -EAGAIN;
+
+	if (!iwl_is_any_associated(priv)) {
+		IWL_DEBUG_SCAN(priv, "force reset rejected: not associated\n");
+		return -ENOLINK;
+	}
+
+	rf_reset = &priv->rf_reset;
+	rf_reset->reset_request_count++;
+	if (!external && rf_reset->last_reset_jiffies &&
+	    time_after(rf_reset->last_reset_jiffies +
+		       IWL_DELAY_NEXT_FORCE_RF_RESET, jiffies)) {
+		IWL_DEBUG_INFO(priv, "RF reset rejected\n");
+		rf_reset->reset_reject_count++;
+		return -EAGAIN;
+	}
+	rf_reset->reset_success_count++;
+	rf_reset->last_reset_jiffies = jiffies;
+
+	/*
+	 * There is no easy and better way to force reset the radio,
+	 * the only known method is switching channel which will force to
+	 * reset and tune the radio.
+	 * Use internal short scan (single channel) operation to should
+	 * achieve this objective.
+	 * Driver should reset the radio when number of consecutive missed
+	 * beacon, or any other uCode error condition detected.
+	 */
+	IWL_DEBUG_INFO(priv, "perform radio reset.\n");
+	iwl_internal_short_hw_scan(priv);
+	return 0;
+}
+
+
+static void iwlagn_recover_from_statistics(struct iwl_priv *priv,
+				struct statistics_rx_phy *cur_ofdm,
+				struct statistics_rx_ht_phy *cur_ofdm_ht,
+				struct statistics_tx *tx,
+				unsigned long stamp)
+{
+	unsigned int msecs;
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	msecs = jiffies_to_msecs(stamp - priv->rx_statistics_jiffies);
+
+	/* Only gather statistics and update time stamp when not associated */
+	if (!iwl_is_any_associated(priv))
+		return;
+
+	/* Do not check/recover when do not have enough statistics data */
+	if (msecs < 99)
+		return;
+
+	if (iwlwifi_mod_params.plcp_check &&
+	    !iwlagn_good_plcp_health(priv, cur_ofdm, cur_ofdm_ht, msecs))
+		iwl_force_rf_reset(priv, false);
+}
+
+/* Calculate noise level, based on measurements during network silence just
+ *   before arriving beacon.  This measurement can be done only if we know
+ *   exactly when to expect beacons, therefore only when we're associated. */
+static void iwlagn_rx_calc_noise(struct iwl_priv *priv)
+{
+	struct statistics_rx_non_phy *rx_info;
+	int num_active_rx = 0;
+	int total_silence = 0;
+	int bcn_silence_a, bcn_silence_b, bcn_silence_c;
+	int last_rx_noise;
+
+	rx_info = &priv->statistics.rx_non_phy;
+
+	bcn_silence_a =
+		le32_to_cpu(rx_info->beacon_silence_rssi_a) & IN_BAND_FILTER;
+	bcn_silence_b =
+		le32_to_cpu(rx_info->beacon_silence_rssi_b) & IN_BAND_FILTER;
+	bcn_silence_c =
+		le32_to_cpu(rx_info->beacon_silence_rssi_c) & IN_BAND_FILTER;
+
+	if (bcn_silence_a) {
+		total_silence += bcn_silence_a;
+		num_active_rx++;
+	}
+	if (bcn_silence_b) {
+		total_silence += bcn_silence_b;
+		num_active_rx++;
+	}
+	if (bcn_silence_c) {
+		total_silence += bcn_silence_c;
+		num_active_rx++;
+	}
+
+	/* Average among active antennas */
+	if (num_active_rx)
+		last_rx_noise = (total_silence / num_active_rx) - 107;
+	else
+		last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
+
+	IWL_DEBUG_CALIB(priv, "inband silence a %u, b %u, c %u, dBm %d\n",
+			bcn_silence_a, bcn_silence_b, bcn_silence_c,
+			last_rx_noise);
+}
+
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+/*
+ *  based on the assumption of all statistics counter are in DWORD
+ *  FIXME: This function is for debugging, do not deal with
+ *  the case of counters roll-over.
+ */
+static void accum_stats(__le32 *prev, __le32 *cur, __le32 *delta,
+			__le32 *max_delta, __le32 *accum, int size)
+{
+	int i;
+
+	for (i = 0;
+	     i < size / sizeof(__le32);
+	     i++, prev++, cur++, delta++, max_delta++, accum++) {
+		if (le32_to_cpu(*cur) > le32_to_cpu(*prev)) {
+			*delta = cpu_to_le32(
+				le32_to_cpu(*cur) - le32_to_cpu(*prev));
+			le32_add_cpu(accum, le32_to_cpu(*delta));
+			if (le32_to_cpu(*delta) > le32_to_cpu(*max_delta))
+				*max_delta = *delta;
+		}
+	}
+}
+
+static void
+iwlagn_accumulative_statistics(struct iwl_priv *priv,
+			    struct statistics_general_common *common,
+			    struct statistics_rx_non_phy *rx_non_phy,
+			    struct statistics_rx_phy *rx_ofdm,
+			    struct statistics_rx_ht_phy *rx_ofdm_ht,
+			    struct statistics_rx_phy *rx_cck,
+			    struct statistics_tx *tx,
+			    struct statistics_bt_activity *bt_activity)
+{
+#define ACCUM(_name)	\
+	accum_stats((__le32 *)&priv->statistics._name,		\
+		    (__le32 *)_name,				\
+		    (__le32 *)&priv->delta_stats._name,		\
+		    (__le32 *)&priv->max_delta_stats._name,	\
+		    (__le32 *)&priv->accum_stats._name,		\
+		    sizeof(*_name));
+
+	ACCUM(common);
+	ACCUM(rx_non_phy);
+	ACCUM(rx_ofdm);
+	ACCUM(rx_ofdm_ht);
+	ACCUM(rx_cck);
+	ACCUM(tx);
+	if (bt_activity)
+		ACCUM(bt_activity);
+#undef ACCUM
+}
+#else
+static inline void
+iwlagn_accumulative_statistics(struct iwl_priv *priv,
+			    struct statistics_general_common *common,
+			    struct statistics_rx_non_phy *rx_non_phy,
+			    struct statistics_rx_phy *rx_ofdm,
+			    struct statistics_rx_ht_phy *rx_ofdm_ht,
+			    struct statistics_rx_phy *rx_cck,
+			    struct statistics_tx *tx,
+			    struct statistics_bt_activity *bt_activity)
+{
+}
+#endif
+
+static int iwlagn_rx_statistics(struct iwl_priv *priv,
+			      struct iwl_rx_cmd_buffer *rxb,
+			      struct iwl_device_cmd *cmd)
+{
+	unsigned long stamp = jiffies;
+	const int reg_recalib_period = 60;
+	int change;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	u32 len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
+	__le32 *flag;
+	struct statistics_general_common *common;
+	struct statistics_rx_non_phy *rx_non_phy;
+	struct statistics_rx_phy *rx_ofdm;
+	struct statistics_rx_ht_phy *rx_ofdm_ht;
+	struct statistics_rx_phy *rx_cck;
+	struct statistics_tx *tx;
+	struct statistics_bt_activity *bt_activity;
+
+	len -= sizeof(struct iwl_cmd_header); /* skip header */
+
+	IWL_DEBUG_RX(priv, "Statistics notification received (%d bytes).\n",
+		     len);
+
+	spin_lock(&priv->statistics.lock);
+
+	if (len == sizeof(struct iwl_bt_notif_statistics)) {
+		struct iwl_bt_notif_statistics *stats;
+		stats = (void *)&pkt->data;
+		flag = &stats->flag;
+		common = &stats->general.common;
+		rx_non_phy = &stats->rx.general.common;
+		rx_ofdm = &stats->rx.ofdm;
+		rx_ofdm_ht = &stats->rx.ofdm_ht;
+		rx_cck = &stats->rx.cck;
+		tx = &stats->tx;
+		bt_activity = &stats->general.activity;
+
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+		/* handle this exception directly */
+		priv->statistics.num_bt_kills = stats->rx.general.num_bt_kills;
+		le32_add_cpu(&priv->statistics.accum_num_bt_kills,
+			     le32_to_cpu(stats->rx.general.num_bt_kills));
+#endif
+	} else if (len == sizeof(struct iwl_notif_statistics)) {
+		struct iwl_notif_statistics *stats;
+		stats = (void *)&pkt->data;
+		flag = &stats->flag;
+		common = &stats->general.common;
+		rx_non_phy = &stats->rx.general;
+		rx_ofdm = &stats->rx.ofdm;
+		rx_ofdm_ht = &stats->rx.ofdm_ht;
+		rx_cck = &stats->rx.cck;
+		tx = &stats->tx;
+		bt_activity = NULL;
+	} else {
+		WARN_ONCE(1, "len %d doesn't match BT (%zu) or normal (%zu)\n",
+			  len, sizeof(struct iwl_bt_notif_statistics),
+			  sizeof(struct iwl_notif_statistics));
+		spin_unlock(&priv->statistics.lock);
+		return 0;
+	}
+
+	change = common->temperature != priv->statistics.common.temperature ||
+		 (*flag & STATISTICS_REPLY_FLG_HT40_MODE_MSK) !=
+		 (priv->statistics.flag & STATISTICS_REPLY_FLG_HT40_MODE_MSK);
+
+	iwlagn_accumulative_statistics(priv, common, rx_non_phy, rx_ofdm,
+				    rx_ofdm_ht, rx_cck, tx, bt_activity);
+
+	iwlagn_recover_from_statistics(priv, rx_ofdm, rx_ofdm_ht, tx, stamp);
+
+	priv->statistics.flag = *flag;
+	memcpy(&priv->statistics.common, common, sizeof(*common));
+	memcpy(&priv->statistics.rx_non_phy, rx_non_phy, sizeof(*rx_non_phy));
+	memcpy(&priv->statistics.rx_ofdm, rx_ofdm, sizeof(*rx_ofdm));
+	memcpy(&priv->statistics.rx_ofdm_ht, rx_ofdm_ht, sizeof(*rx_ofdm_ht));
+	memcpy(&priv->statistics.rx_cck, rx_cck, sizeof(*rx_cck));
+	memcpy(&priv->statistics.tx, tx, sizeof(*tx));
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+	if (bt_activity)
+		memcpy(&priv->statistics.bt_activity, bt_activity,
+			sizeof(*bt_activity));
+#endif
+
+	priv->rx_statistics_jiffies = stamp;
+
+	set_bit(STATUS_STATISTICS, &priv->status);
+
+	/* Reschedule the statistics timer to occur in
+	 * reg_recalib_period seconds to ensure we get a
+	 * thermal update even if the uCode doesn't give
+	 * us one */
+	mod_timer(&priv->statistics_periodic, jiffies +
+		  msecs_to_jiffies(reg_recalib_period * 1000));
+
+	if (unlikely(!test_bit(STATUS_SCANNING, &priv->status)) &&
+	    (pkt->hdr.cmd == STATISTICS_NOTIFICATION)) {
+		iwlagn_rx_calc_noise(priv);
+		queue_work(priv->workqueue, &priv->run_time_calib_work);
+	}
+	if (priv->lib->temperature && change)
+		priv->lib->temperature(priv);
+
+	spin_unlock(&priv->statistics.lock);
+
+	return 0;
+}
+
+static int iwlagn_rx_reply_statistics(struct iwl_priv *priv,
+				    struct iwl_rx_cmd_buffer *rxb,
+				    struct iwl_device_cmd *cmd)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl_notif_statistics *stats = (void *)pkt->data;
+
+	if (le32_to_cpu(stats->flag) & UCODE_STATISTICS_CLEAR_MSK) {
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+		memset(&priv->accum_stats, 0,
+			sizeof(priv->accum_stats));
+		memset(&priv->delta_stats, 0,
+			sizeof(priv->delta_stats));
+		memset(&priv->max_delta_stats, 0,
+			sizeof(priv->max_delta_stats));
+#endif
+		IWL_DEBUG_RX(priv, "Statistics have been cleared\n");
+	}
+	iwlagn_rx_statistics(priv, rxb, cmd);
+	return 0;
+}
+
+/* Handle notification from uCode that card's power state is changing
+ * due to software, hardware, or critical temperature RFKILL */
+static int iwlagn_rx_card_state_notif(struct iwl_priv *priv,
+				    struct iwl_rx_cmd_buffer *rxb,
+				    struct iwl_device_cmd *cmd)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl_card_state_notif *card_state_notif = (void *)pkt->data;
+	u32 flags = le32_to_cpu(card_state_notif->flags);
+	unsigned long status = priv->status;
+
+	IWL_DEBUG_RF_KILL(priv, "Card state received: HW:%s SW:%s CT:%s\n",
+			  (flags & HW_CARD_DISABLED) ? "Kill" : "On",
+			  (flags & SW_CARD_DISABLED) ? "Kill" : "On",
+			  (flags & CT_CARD_DISABLED) ?
+			  "Reached" : "Not reached");
+
+	if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED |
+		     CT_CARD_DISABLED)) {
+
+		iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_SET,
+			    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
+
+		iwl_write_direct32(priv->trans, HBUS_TARG_MBX_C,
+					HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
+
+		if (!(flags & RXON_CARD_DISABLED)) {
+			iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_CLR,
+				    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
+			iwl_write_direct32(priv->trans, HBUS_TARG_MBX_C,
+					HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
+		}
+		if (flags & CT_CARD_DISABLED)
+			iwl_tt_enter_ct_kill(priv);
+	}
+	if (!(flags & CT_CARD_DISABLED))
+		iwl_tt_exit_ct_kill(priv);
+
+	if (flags & HW_CARD_DISABLED)
+		set_bit(STATUS_RF_KILL_HW, &priv->status);
+	else
+		clear_bit(STATUS_RF_KILL_HW, &priv->status);
+
+
+	if (!(flags & RXON_CARD_DISABLED))
+		iwl_scan_cancel(priv);
+
+	if ((test_bit(STATUS_RF_KILL_HW, &status) !=
+	     test_bit(STATUS_RF_KILL_HW, &priv->status)))
+		wiphy_rfkill_set_hw_state(priv->hw->wiphy,
+			test_bit(STATUS_RF_KILL_HW, &priv->status));
+	else
+		wake_up(&priv->trans->wait_command_queue);
+	return 0;
+}
+
+static int iwlagn_rx_missed_beacon_notif(struct iwl_priv *priv,
+				       struct iwl_rx_cmd_buffer *rxb,
+				       struct iwl_device_cmd *cmd)
+
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl_missed_beacon_notif *missed_beacon = (void *)pkt->data;
+
+	if (le32_to_cpu(missed_beacon->consecutive_missed_beacons) >
+	    priv->missed_beacon_threshold) {
+		IWL_DEBUG_CALIB(priv,
+		    "missed bcn cnsq %d totl %d rcd %d expctd %d\n",
+		    le32_to_cpu(missed_beacon->consecutive_missed_beacons),
+		    le32_to_cpu(missed_beacon->total_missed_becons),
+		    le32_to_cpu(missed_beacon->num_recvd_beacons),
+		    le32_to_cpu(missed_beacon->num_expected_beacons));
+		if (!test_bit(STATUS_SCANNING, &priv->status))
+			iwl_init_sensitivity(priv);
+	}
+	return 0;
+}
+
+/* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD).
+ * This will be used later in iwl_rx_reply_rx() for REPLY_RX_MPDU_CMD. */
+static int iwlagn_rx_reply_rx_phy(struct iwl_priv *priv,
+				struct iwl_rx_cmd_buffer *rxb,
+				struct iwl_device_cmd *cmd)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+
+	priv->last_phy_res_valid = true;
+	memcpy(&priv->last_phy_res, pkt->data,
+	       sizeof(struct iwl_rx_phy_res));
+	return 0;
+}
+
+/*
+ * returns non-zero if packet should be dropped
+ */
+static int iwlagn_set_decrypted_flag(struct iwl_priv *priv,
+				  struct ieee80211_hdr *hdr,
+				  u32 decrypt_res,
+				  struct ieee80211_rx_status *stats)
+{
+	u16 fc = le16_to_cpu(hdr->frame_control);
+
+	/*
+	 * All contexts have the same setting here due to it being
+	 * a module parameter, so OK to check any context.
+	 */
+	if (priv->contexts[IWL_RXON_CTX_BSS].active.filter_flags &
+						RXON_FILTER_DIS_DECRYPT_MSK)
+		return 0;
+
+	if (!(fc & IEEE80211_FCTL_PROTECTED))
+		return 0;
+
+	IWL_DEBUG_RX(priv, "decrypt_res:0x%x\n", decrypt_res);
+	switch (decrypt_res & RX_RES_STATUS_SEC_TYPE_MSK) {
+	case RX_RES_STATUS_SEC_TYPE_TKIP:
+		/* The uCode has got a bad phase 1 Key, pushes the packet.
+		 * Decryption will be done in SW. */
+		if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
+		    RX_RES_STATUS_BAD_KEY_TTAK)
+			break;
+
+	case RX_RES_STATUS_SEC_TYPE_WEP:
+		if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
+		    RX_RES_STATUS_BAD_ICV_MIC) {
+			/* bad ICV, the packet is destroyed since the
+			 * decryption is inplace, drop it */
+			IWL_DEBUG_RX(priv, "Packet destroyed\n");
+			return -1;
+		}
+	case RX_RES_STATUS_SEC_TYPE_CCMP:
+		if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
+		    RX_RES_STATUS_DECRYPT_OK) {
+			IWL_DEBUG_RX(priv, "hw decrypt successfully!!!\n");
+			stats->flag |= RX_FLAG_DECRYPTED;
+		}
+		break;
+
+	default:
+		break;
+	}
+	return 0;
+}
+
+static void iwlagn_pass_packet_to_mac80211(struct iwl_priv *priv,
+					struct ieee80211_hdr *hdr,
+					u16 len,
+					u32 ampdu_status,
+					struct iwl_rx_cmd_buffer *rxb,
+					struct ieee80211_rx_status *stats)
+{
+	struct sk_buff *skb;
+	__le16 fc = hdr->frame_control;
+	struct iwl_rxon_context *ctx;
+	unsigned int hdrlen, fraglen;
+
+	/* We only process data packets if the interface is open */
+	if (unlikely(!priv->is_open)) {
+		IWL_DEBUG_DROP_LIMIT(priv,
+		    "Dropping packet while interface is not open.\n");
+		return;
+	}
+
+	/* In case of HW accelerated crypto and bad decryption, drop */
+	if (!iwlwifi_mod_params.sw_crypto &&
+	    iwlagn_set_decrypted_flag(priv, hdr, ampdu_status, stats))
+		return;
+
+	/* Dont use dev_alloc_skb(), we'll have enough headroom once
+	 * ieee80211_hdr pulled.
+	 */
+	skb = alloc_skb(128, GFP_ATOMIC);
+	if (!skb) {
+		IWL_ERR(priv, "alloc_skb failed\n");
+		return;
+	}
+	/* If frame is small enough to fit in skb->head, pull it completely.
+	 * If not, only pull ieee80211_hdr so that splice() or TCP coalesce
+	 * are more efficient.
+	 */
+	hdrlen = (len <= skb_tailroom(skb)) ? len : sizeof(*hdr);
+
+	memcpy(skb_put(skb, hdrlen), hdr, hdrlen);
+	fraglen = len - hdrlen;
+
+	if (fraglen) {
+		int offset = (void *)hdr + hdrlen -
+			     rxb_addr(rxb) + rxb_offset(rxb);
+
+		skb_add_rx_frag(skb, 0, rxb_steal_page(rxb), offset,
+				fraglen, rxb->truesize);
+	}
+
+	/*
+	* Wake any queues that were stopped due to a passive channel tx
+	* failure. This can happen because the regulatory enforcement in
+	* the device waits for a beacon before allowing transmission,
+	* sometimes even after already having transmitted frames for the
+	* association because the new RXON may reset the information.
+	*/
+	if (unlikely(ieee80211_is_beacon(fc) && priv->passive_no_rx)) {
+		for_each_context(priv, ctx) {
+			if (!ether_addr_equal(hdr->addr3,
+					      ctx->active.bssid_addr))
+				continue;
+			iwlagn_lift_passive_no_rx(priv);
+		}
+	}
+
+	memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
+
+	ieee80211_rx(priv->hw, skb);
+}
+
+static u32 iwlagn_translate_rx_status(struct iwl_priv *priv, u32 decrypt_in)
+{
+	u32 decrypt_out = 0;
+
+	if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) ==
+					RX_RES_STATUS_STATION_FOUND)
+		decrypt_out |= (RX_RES_STATUS_STATION_FOUND |
+				RX_RES_STATUS_NO_STATION_INFO_MISMATCH);
+
+	decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK);
+
+	/* packet was not encrypted */
+	if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
+					RX_RES_STATUS_SEC_TYPE_NONE)
+		return decrypt_out;
+
+	/* packet was encrypted with unknown alg */
+	if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
+					RX_RES_STATUS_SEC_TYPE_ERR)
+		return decrypt_out;
+
+	/* decryption was not done in HW */
+	if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) !=
+					RX_MPDU_RES_STATUS_DEC_DONE_MSK)
+		return decrypt_out;
+
+	switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) {
+
+	case RX_RES_STATUS_SEC_TYPE_CCMP:
+		/* alg is CCM: check MIC only */
+		if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK))
+			/* Bad MIC */
+			decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
+		else
+			decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
+
+		break;
+
+	case RX_RES_STATUS_SEC_TYPE_TKIP:
+		if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) {
+			/* Bad TTAK */
+			decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK;
+			break;
+		}
+		/* fall through if TTAK OK */
+	default:
+		if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK))
+			decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
+		else
+			decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
+		break;
+	}
+
+	IWL_DEBUG_RX(priv, "decrypt_in:0x%x  decrypt_out = 0x%x\n",
+					decrypt_in, decrypt_out);
+
+	return decrypt_out;
+}
+
+/* Calc max signal level (dBm) among 3 possible receivers */
+static int iwlagn_calc_rssi(struct iwl_priv *priv,
+			     struct iwl_rx_phy_res *rx_resp)
+{
+	/* data from PHY/DSP regarding signal strength, etc.,
+	 *   contents are always there, not configurable by host
+	 */
+	struct iwlagn_non_cfg_phy *ncphy =
+		(struct iwlagn_non_cfg_phy *)rx_resp->non_cfg_phy_buf;
+	u32 val, rssi_a, rssi_b, rssi_c, max_rssi;
+	u8 agc;
+
+	val  = le32_to_cpu(ncphy->non_cfg_phy[IWLAGN_RX_RES_AGC_IDX]);
+	agc = (val & IWLAGN_OFDM_AGC_MSK) >> IWLAGN_OFDM_AGC_BIT_POS;
+
+	/* Find max rssi among 3 possible receivers.
+	 * These values are measured by the digital signal processor (DSP).
+	 * They should stay fairly constant even as the signal strength varies,
+	 *   if the radio's automatic gain control (AGC) is working right.
+	 * AGC value (see below) will provide the "interesting" info.
+	 */
+	val = le32_to_cpu(ncphy->non_cfg_phy[IWLAGN_RX_RES_RSSI_AB_IDX]);
+	rssi_a = (val & IWLAGN_OFDM_RSSI_INBAND_A_BITMSK) >>
+		IWLAGN_OFDM_RSSI_A_BIT_POS;
+	rssi_b = (val & IWLAGN_OFDM_RSSI_INBAND_B_BITMSK) >>
+		IWLAGN_OFDM_RSSI_B_BIT_POS;
+	val = le32_to_cpu(ncphy->non_cfg_phy[IWLAGN_RX_RES_RSSI_C_IDX]);
+	rssi_c = (val & IWLAGN_OFDM_RSSI_INBAND_C_BITMSK) >>
+		IWLAGN_OFDM_RSSI_C_BIT_POS;
+
+	max_rssi = max_t(u32, rssi_a, rssi_b);
+	max_rssi = max_t(u32, max_rssi, rssi_c);
+
+	IWL_DEBUG_STATS(priv, "Rssi In A %d B %d C %d Max %d AGC dB %d\n",
+		rssi_a, rssi_b, rssi_c, max_rssi, agc);
+
+	/* dBm = max_rssi dB - agc dB - constant.
+	 * Higher AGC (higher radio gain) means lower signal. */
+	return max_rssi - agc - IWLAGN_RSSI_OFFSET;
+}
+
+/* Called for REPLY_RX (legacy ABG frames), or
+ * REPLY_RX_MPDU_CMD (HT high-throughput N frames). */
+static int iwlagn_rx_reply_rx(struct iwl_priv *priv,
+			    struct iwl_rx_cmd_buffer *rxb,
+			    struct iwl_device_cmd *cmd)
+{
+	struct ieee80211_hdr *header;
+	struct ieee80211_rx_status rx_status;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl_rx_phy_res *phy_res;
+	__le32 rx_pkt_status;
+	struct iwl_rx_mpdu_res_start *amsdu;
+	u32 len;
+	u32 ampdu_status;
+	u32 rate_n_flags;
+
+	/**
+	 * REPLY_RX and REPLY_RX_MPDU_CMD are handled differently.
+	 *	REPLY_RX: physical layer info is in this buffer
+	 *	REPLY_RX_MPDU_CMD: physical layer info was sent in separate
+	 *		command and cached in priv->last_phy_res
+	 *
+	 * Here we set up local variables depending on which command is
+	 * received.
+	 */
+	if (pkt->hdr.cmd == REPLY_RX) {
+		phy_res = (struct iwl_rx_phy_res *)pkt->data;
+		header = (struct ieee80211_hdr *)(pkt->data + sizeof(*phy_res)
+				+ phy_res->cfg_phy_cnt);
+
+		len = le16_to_cpu(phy_res->byte_count);
+		rx_pkt_status = *(__le32 *)(pkt->data + sizeof(*phy_res) +
+				phy_res->cfg_phy_cnt + len);
+		ampdu_status = le32_to_cpu(rx_pkt_status);
+	} else {
+		if (!priv->last_phy_res_valid) {
+			IWL_ERR(priv, "MPDU frame without cached PHY data\n");
+			return 0;
+		}
+		phy_res = &priv->last_phy_res;
+		amsdu = (struct iwl_rx_mpdu_res_start *)pkt->data;
+		header = (struct ieee80211_hdr *)(pkt->data + sizeof(*amsdu));
+		len = le16_to_cpu(amsdu->byte_count);
+		rx_pkt_status = *(__le32 *)(pkt->data + sizeof(*amsdu) + len);
+		ampdu_status = iwlagn_translate_rx_status(priv,
+						le32_to_cpu(rx_pkt_status));
+	}
+
+	if ((unlikely(phy_res->cfg_phy_cnt > 20))) {
+		IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d\n",
+				phy_res->cfg_phy_cnt);
+		return 0;
+	}
+
+	if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) ||
+	    !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
+		IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n",
+				le32_to_cpu(rx_pkt_status));
+		return 0;
+	}
+
+	/* This will be used in several places later */
+	rate_n_flags = le32_to_cpu(phy_res->rate_n_flags);
+
+	/* rx_status carries information about the packet to mac80211 */
+	rx_status.mactime = le64_to_cpu(phy_res->timestamp);
+	rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
+				IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
+	rx_status.freq =
+		ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel),
+					       rx_status.band);
+	rx_status.rate_idx =
+		iwlagn_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band);
+	rx_status.flag = 0;
+
+	/* TSF isn't reliable. In order to allow smooth user experience,
+	 * this W/A doesn't propagate it to the mac80211 */
+	/*rx_status.flag |= RX_FLAG_MACTIME_MPDU;*/
+
+	priv->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp);
+
+	/* Find max signal strength (dBm) among 3 antenna/receiver chains */
+	rx_status.signal = iwlagn_calc_rssi(priv, phy_res);
+
+	IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, TSF %llu\n",
+		rx_status.signal, (unsigned long long)rx_status.mactime);
+
+	/*
+	 * "antenna number"
+	 *
+	 * It seems that the antenna field in the phy flags value
+	 * is actually a bit field. This is undefined by radiotap,
+	 * it wants an actual antenna number but I always get "7"
+	 * for most legacy frames I receive indicating that the
+	 * same frame was received on all three RX chains.
+	 *
+	 * I think this field should be removed in favor of a
+	 * new 802.11n radiotap field "RX chains" that is defined
+	 * as a bitmask.
+	 */
+	rx_status.antenna =
+		(le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK)
+		>> RX_RES_PHY_FLAGS_ANTENNA_POS;
+
+	/* set the preamble flag if appropriate */
+	if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
+		rx_status.flag |= RX_FLAG_SHORTPRE;
+
+	/* Set up the HT phy flags */
+	if (rate_n_flags & RATE_MCS_HT_MSK)
+		rx_status.flag |= RX_FLAG_HT;
+	if (rate_n_flags & RATE_MCS_HT40_MSK)
+		rx_status.flag |= RX_FLAG_40MHZ;
+	if (rate_n_flags & RATE_MCS_SGI_MSK)
+		rx_status.flag |= RX_FLAG_SHORT_GI;
+	if (rate_n_flags & RATE_MCS_GF_MSK)
+		rx_status.flag |= RX_FLAG_HT_GF;
+
+	iwlagn_pass_packet_to_mac80211(priv, header, len, ampdu_status,
+				    rxb, &rx_status);
+	return 0;
+}
+
+static int iwlagn_rx_noa_notification(struct iwl_priv *priv,
+				      struct iwl_rx_cmd_buffer *rxb,
+				      struct iwl_device_cmd *cmd)
+{
+	struct iwl_wipan_noa_data *new_data, *old_data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl_wipan_noa_notification *noa_notif = (void *)pkt->data;
+
+	/* no condition -- we're in softirq */
+	old_data = rcu_dereference_protected(priv->noa_data, true);
+
+	if (noa_notif->noa_active) {
+		u32 len = le16_to_cpu(noa_notif->noa_attribute.length);
+		u32 copylen = len;
+
+		/* EID, len, OUI, subtype */
+		len += 1 + 1 + 3 + 1;
+		/* P2P id, P2P length */
+		len += 1 + 2;
+		copylen += 1 + 2;
+
+		new_data = kmalloc(sizeof(*new_data) + len, GFP_ATOMIC);
+		if (new_data) {
+			new_data->length = len;
+			new_data->data[0] = WLAN_EID_VENDOR_SPECIFIC;
+			new_data->data[1] = len - 2; /* not counting EID, len */
+			new_data->data[2] = (WLAN_OUI_WFA >> 16) & 0xff;
+			new_data->data[3] = (WLAN_OUI_WFA >> 8) & 0xff;
+			new_data->data[4] = (WLAN_OUI_WFA >> 0) & 0xff;
+			new_data->data[5] = WLAN_OUI_TYPE_WFA_P2P;
+			memcpy(&new_data->data[6], &noa_notif->noa_attribute,
+			       copylen);
+		}
+	} else
+		new_data = NULL;
+
+	rcu_assign_pointer(priv->noa_data, new_data);
+
+	if (old_data)
+		kfree_rcu(old_data, rcu_head);
+
+	return 0;
+}
+
+/**
+ * iwl_setup_rx_handlers - Initialize Rx handler callbacks
+ *
+ * Setup the RX handlers for each of the reply types sent from the uCode
+ * to the host.
+ */
+void iwl_setup_rx_handlers(struct iwl_priv *priv)
+{
+	int (**handlers)(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb,
+			       struct iwl_device_cmd *cmd);
+
+	handlers = priv->rx_handlers;
+
+	handlers[REPLY_ERROR]			= iwlagn_rx_reply_error;
+	handlers[CHANNEL_SWITCH_NOTIFICATION]	= iwlagn_rx_csa;
+	handlers[SPECTRUM_MEASURE_NOTIFICATION]	=
+		iwlagn_rx_spectrum_measure_notif;
+	handlers[PM_SLEEP_NOTIFICATION]		= iwlagn_rx_pm_sleep_notif;
+	handlers[PM_DEBUG_STATISTIC_NOTIFIC]	=
+		iwlagn_rx_pm_debug_statistics_notif;
+	handlers[BEACON_NOTIFICATION]		= iwlagn_rx_beacon_notif;
+	handlers[REPLY_ADD_STA]			= iwl_add_sta_callback;
+
+	handlers[REPLY_WIPAN_NOA_NOTIFICATION]	= iwlagn_rx_noa_notification;
+
+	/*
+	 * The same handler is used for both the REPLY to a discrete
+	 * statistics request from the host as well as for the periodic
+	 * statistics notifications (after received beacons) from the uCode.
+	 */
+	handlers[REPLY_STATISTICS_CMD]		= iwlagn_rx_reply_statistics;
+	handlers[STATISTICS_NOTIFICATION]	= iwlagn_rx_statistics;
+
+	iwl_setup_rx_scan_handlers(priv);
+
+	handlers[CARD_STATE_NOTIFICATION]	= iwlagn_rx_card_state_notif;
+	handlers[MISSED_BEACONS_NOTIFICATION]	=
+		iwlagn_rx_missed_beacon_notif;
+
+	/* Rx handlers */
+	handlers[REPLY_RX_PHY_CMD]		= iwlagn_rx_reply_rx_phy;
+	handlers[REPLY_RX_MPDU_CMD]		= iwlagn_rx_reply_rx;
+
+	/* block ack */
+	handlers[REPLY_COMPRESSED_BA]		=
+		iwlagn_rx_reply_compressed_ba;
+
+	priv->rx_handlers[REPLY_TX] = iwlagn_rx_reply_tx;
+
+	/* set up notification wait support */
+	iwl_notification_wait_init(&priv->notif_wait);
+
+	/* Set up BT Rx handlers */
+	if (priv->cfg->bt_params)
+		iwlagn_bt_rx_handler_setup(priv);
+}
+
+int iwl_rx_dispatch(struct iwl_op_mode *op_mode, struct iwl_rx_cmd_buffer *rxb,
+		    struct iwl_device_cmd *cmd)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+	int err = 0;
+
+	/*
+	 * Do the notification wait before RX handlers so
+	 * even if the RX handler consumes the RXB we have
+	 * access to it in the notification wait entry.
+	 */
+	iwl_notification_wait_notify(&priv->notif_wait, pkt);
+
+#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
+	/*
+	 * RX data may be forwarded to userspace in one
+	 * of two cases: the user owns the fw through testmode or when
+	 * the user requested to monitor the rx w/o affecting the regular flow.
+	 * In these cases the iwl_test object will handle forwarding the rx
+	 * data to user space.
+	 * Note that if the ownership flag != IWL_OWNERSHIP_TM the flow
+	 * continues.
+	 */
+	iwl_test_rx(&priv->tst, rxb);
+#endif
+
+	if (priv->ucode_owner != IWL_OWNERSHIP_TM) {
+		/* Based on type of command response or notification,
+		 *   handle those that need handling via function in
+		 *   rx_handlers table.  See iwl_setup_rx_handlers() */
+		if (priv->rx_handlers[pkt->hdr.cmd]) {
+			priv->rx_handlers_stats[pkt->hdr.cmd]++;
+			err = priv->rx_handlers[pkt->hdr.cmd] (priv, rxb, cmd);
+		} else {
+			/* No handling needed */
+			IWL_DEBUG_RX(priv, "No handler needed for %s, 0x%02x\n",
+				     iwl_dvm_get_cmd_string(pkt->hdr.cmd),
+				     pkt->hdr.cmd);
+		}
+	}
+	return err;
+}
diff --git a/drivers/net/wireless/iwlwifi/dvm/rxon.c b/drivers/net/wireless/iwlwifi/dvm/rxon.c
new file mode 100644
index 00000000000..6ee940f497f
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/rxon.c
@@ -0,0 +1,1577 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#include <linux/etherdevice.h>
+#include "iwl-trans.h"
+#include "iwl-modparams.h"
+#include "dev.h"
+#include "agn.h"
+#include "calib.h"
+
+/*
+ * initialize rxon structure with default values from eeprom
+ */
+void iwl_connection_init_rx_config(struct iwl_priv *priv,
+				   struct iwl_rxon_context *ctx)
+{
+	memset(&ctx->staging, 0, sizeof(ctx->staging));
+
+	if (!ctx->vif) {
+		ctx->staging.dev_type = ctx->unused_devtype;
+	} else
+	switch (ctx->vif->type) {
+	case NL80211_IFTYPE_AP:
+		ctx->staging.dev_type = ctx->ap_devtype;
+		break;
+
+	case NL80211_IFTYPE_STATION:
+		ctx->staging.dev_type = ctx->station_devtype;
+		ctx->staging.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK;
+		break;
+
+	case NL80211_IFTYPE_ADHOC:
+		ctx->staging.dev_type = ctx->ibss_devtype;
+		ctx->staging.flags = RXON_FLG_SHORT_PREAMBLE_MSK;
+		ctx->staging.filter_flags = RXON_FILTER_BCON_AWARE_MSK |
+						  RXON_FILTER_ACCEPT_GRP_MSK;
+		break;
+
+	case NL80211_IFTYPE_MONITOR:
+		ctx->staging.dev_type = RXON_DEV_TYPE_SNIFFER;
+		break;
+
+	default:
+		IWL_ERR(priv, "Unsupported interface type %d\n",
+			ctx->vif->type);
+		break;
+	}
+
+#if 0
+	/* TODO:  Figure out when short_preamble would be set and cache from
+	 * that */
+	if (!hw_to_local(priv->hw)->short_preamble)
+		ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+	else
+		ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
+#endif
+
+	ctx->staging.channel = cpu_to_le16(priv->hw->conf.channel->hw_value);
+	priv->band = priv->hw->conf.channel->band;
+
+	iwl_set_flags_for_band(priv, ctx, priv->band, ctx->vif);
+
+	/* clear both MIX and PURE40 mode flag */
+	ctx->staging.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED |
+					RXON_FLG_CHANNEL_MODE_PURE_40);
+	if (ctx->vif)
+		memcpy(ctx->staging.node_addr, ctx->vif->addr, ETH_ALEN);
+
+	ctx->staging.ofdm_ht_single_stream_basic_rates = 0xff;
+	ctx->staging.ofdm_ht_dual_stream_basic_rates = 0xff;
+	ctx->staging.ofdm_ht_triple_stream_basic_rates = 0xff;
+}
+
+static int iwlagn_disable_bss(struct iwl_priv *priv,
+			      struct iwl_rxon_context *ctx,
+			      struct iwl_rxon_cmd *send)
+{
+	__le32 old_filter = send->filter_flags;
+	int ret;
+
+	send->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd,
+				CMD_SYNC, sizeof(*send), send);
+
+	send->filter_flags = old_filter;
+
+	if (ret)
+		IWL_DEBUG_QUIET_RFKILL(priv,
+			"Error clearing ASSOC_MSK on BSS (%d)\n", ret);
+
+	return ret;
+}
+
+static int iwlagn_disable_pan(struct iwl_priv *priv,
+			      struct iwl_rxon_context *ctx,
+			      struct iwl_rxon_cmd *send)
+{
+	struct iwl_notification_wait disable_wait;
+	__le32 old_filter = send->filter_flags;
+	u8 old_dev_type = send->dev_type;
+	int ret;
+	static const u8 deactivate_cmd[] = {
+		REPLY_WIPAN_DEACTIVATION_COMPLETE
+	};
+
+	iwl_init_notification_wait(&priv->notif_wait, &disable_wait,
+				   deactivate_cmd, ARRAY_SIZE(deactivate_cmd),
+				   NULL, NULL);
+
+	send->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	send->dev_type = RXON_DEV_TYPE_P2P;
+	ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd,
+				CMD_SYNC, sizeof(*send), send);
+
+	send->filter_flags = old_filter;
+	send->dev_type = old_dev_type;
+
+	if (ret) {
+		IWL_ERR(priv, "Error disabling PAN (%d)\n", ret);
+		iwl_remove_notification(&priv->notif_wait, &disable_wait);
+	} else {
+		ret = iwl_wait_notification(&priv->notif_wait,
+					    &disable_wait, HZ);
+		if (ret)
+			IWL_ERR(priv, "Timed out waiting for PAN disable\n");
+	}
+
+	return ret;
+}
+
+static int iwlagn_disconn_pan(struct iwl_priv *priv,
+			      struct iwl_rxon_context *ctx,
+			      struct iwl_rxon_cmd *send)
+{
+	__le32 old_filter = send->filter_flags;
+	int ret;
+
+	send->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd, CMD_SYNC,
+				sizeof(*send), send);
+
+	send->filter_flags = old_filter;
+
+	return ret;
+}
+
+static void iwlagn_update_qos(struct iwl_priv *priv,
+			      struct iwl_rxon_context *ctx)
+{
+	int ret;
+
+	if (!ctx->is_active)
+		return;
+
+	ctx->qos_data.def_qos_parm.qos_flags = 0;
+
+	if (ctx->qos_data.qos_active)
+		ctx->qos_data.def_qos_parm.qos_flags |=
+			QOS_PARAM_FLG_UPDATE_EDCA_MSK;
+
+	if (ctx->ht.enabled)
+		ctx->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK;
+
+	IWL_DEBUG_INFO(priv, "send QoS cmd with Qos active=%d FLAGS=0x%X\n",
+		      ctx->qos_data.qos_active,
+		      ctx->qos_data.def_qos_parm.qos_flags);
+
+	ret = iwl_dvm_send_cmd_pdu(priv, ctx->qos_cmd, CMD_SYNC,
+			       sizeof(struct iwl_qosparam_cmd),
+			       &ctx->qos_data.def_qos_parm);
+	if (ret)
+		IWL_DEBUG_QUIET_RFKILL(priv, "Failed to update QoS\n");
+}
+
+static int iwlagn_update_beacon(struct iwl_priv *priv,
+				struct ieee80211_vif *vif)
+{
+	lockdep_assert_held(&priv->mutex);
+
+	dev_kfree_skb(priv->beacon_skb);
+	priv->beacon_skb = ieee80211_beacon_get(priv->hw, vif);
+	if (!priv->beacon_skb)
+		return -ENOMEM;
+	return iwlagn_send_beacon_cmd(priv);
+}
+
+static int iwlagn_send_rxon_assoc(struct iwl_priv *priv,
+				  struct iwl_rxon_context *ctx)
+{
+	int ret = 0;
+	struct iwl_rxon_assoc_cmd rxon_assoc;
+	const struct iwl_rxon_cmd *rxon1 = &ctx->staging;
+	const struct iwl_rxon_cmd *rxon2 = &ctx->active;
+
+	if ((rxon1->flags == rxon2->flags) &&
+	    (rxon1->filter_flags == rxon2->filter_flags) &&
+	    (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
+	    (rxon1->ofdm_ht_single_stream_basic_rates ==
+	     rxon2->ofdm_ht_single_stream_basic_rates) &&
+	    (rxon1->ofdm_ht_dual_stream_basic_rates ==
+	     rxon2->ofdm_ht_dual_stream_basic_rates) &&
+	    (rxon1->ofdm_ht_triple_stream_basic_rates ==
+	     rxon2->ofdm_ht_triple_stream_basic_rates) &&
+	    (rxon1->acquisition_data == rxon2->acquisition_data) &&
+	    (rxon1->rx_chain == rxon2->rx_chain) &&
+	    (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
+		IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC.  Not resending.\n");
+		return 0;
+	}
+
+	rxon_assoc.flags = ctx->staging.flags;
+	rxon_assoc.filter_flags = ctx->staging.filter_flags;
+	rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates;
+	rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates;
+	rxon_assoc.reserved1 = 0;
+	rxon_assoc.reserved2 = 0;
+	rxon_assoc.reserved3 = 0;
+	rxon_assoc.ofdm_ht_single_stream_basic_rates =
+	    ctx->staging.ofdm_ht_single_stream_basic_rates;
+	rxon_assoc.ofdm_ht_dual_stream_basic_rates =
+	    ctx->staging.ofdm_ht_dual_stream_basic_rates;
+	rxon_assoc.rx_chain_select_flags = ctx->staging.rx_chain;
+	rxon_assoc.ofdm_ht_triple_stream_basic_rates =
+		 ctx->staging.ofdm_ht_triple_stream_basic_rates;
+	rxon_assoc.acquisition_data = ctx->staging.acquisition_data;
+
+	ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_assoc_cmd,
+				CMD_ASYNC, sizeof(rxon_assoc), &rxon_assoc);
+	return ret;
+}
+
+static u16 iwl_adjust_beacon_interval(u16 beacon_val, u16 max_beacon_val)
+{
+	u16 new_val;
+	u16 beacon_factor;
+
+	/*
+	 * If mac80211 hasn't given us a beacon interval, program
+	 * the default into the device (not checking this here
+	 * would cause the adjustment below to return the maximum
+	 * value, which may break PAN.)
+	 */
+	if (!beacon_val)
+		return DEFAULT_BEACON_INTERVAL;
+
+	/*
+	 * If the beacon interval we obtained from the peer
+	 * is too large, we'll have to wake up more often
+	 * (and in IBSS case, we'll beacon too much)
+	 *
+	 * For example, if max_beacon_val is 4096, and the
+	 * requested beacon interval is 7000, we'll have to
+	 * use 3500 to be able to wake up on the beacons.
+	 *
+	 * This could badly influence beacon detection stats.
+	 */
+
+	beacon_factor = (beacon_val + max_beacon_val) / max_beacon_val;
+	new_val = beacon_val / beacon_factor;
+
+	if (!new_val)
+		new_val = max_beacon_val;
+
+	return new_val;
+}
+
+static int iwl_send_rxon_timing(struct iwl_priv *priv,
+				struct iwl_rxon_context *ctx)
+{
+	u64 tsf;
+	s32 interval_tm, rem;
+	struct ieee80211_conf *conf = NULL;
+	u16 beacon_int;
+	struct ieee80211_vif *vif = ctx->vif;
+
+	conf = &priv->hw->conf;
+
+	lockdep_assert_held(&priv->mutex);
+
+	memset(&ctx->timing, 0, sizeof(struct iwl_rxon_time_cmd));
+
+	ctx->timing.timestamp = cpu_to_le64(priv->timestamp);
+	ctx->timing.listen_interval = cpu_to_le16(conf->listen_interval);
+
+	beacon_int = vif ? vif->bss_conf.beacon_int : 0;
+
+	/*
+	 * TODO: For IBSS we need to get atim_window from mac80211,
+	 *	 for now just always use 0
+	 */
+	ctx->timing.atim_window = 0;
+
+	if (ctx->ctxid == IWL_RXON_CTX_PAN &&
+	    (!ctx->vif || ctx->vif->type != NL80211_IFTYPE_STATION) &&
+	    iwl_is_associated(priv, IWL_RXON_CTX_BSS) &&
+	    priv->contexts[IWL_RXON_CTX_BSS].vif &&
+	    priv->contexts[IWL_RXON_CTX_BSS].vif->bss_conf.beacon_int) {
+		ctx->timing.beacon_interval =
+			priv->contexts[IWL_RXON_CTX_BSS].timing.beacon_interval;
+		beacon_int = le16_to_cpu(ctx->timing.beacon_interval);
+	} else if (ctx->ctxid == IWL_RXON_CTX_BSS &&
+		   iwl_is_associated(priv, IWL_RXON_CTX_PAN) &&
+		   priv->contexts[IWL_RXON_CTX_PAN].vif &&
+		   priv->contexts[IWL_RXON_CTX_PAN].vif->bss_conf.beacon_int &&
+		   (!iwl_is_associated_ctx(ctx) || !ctx->vif ||
+		    !ctx->vif->bss_conf.beacon_int)) {
+		ctx->timing.beacon_interval =
+			priv->contexts[IWL_RXON_CTX_PAN].timing.beacon_interval;
+		beacon_int = le16_to_cpu(ctx->timing.beacon_interval);
+	} else {
+		beacon_int = iwl_adjust_beacon_interval(beacon_int,
+			IWL_MAX_UCODE_BEACON_INTERVAL * TIME_UNIT);
+		ctx->timing.beacon_interval = cpu_to_le16(beacon_int);
+	}
+
+	ctx->beacon_int = beacon_int;
+
+	tsf = priv->timestamp; /* tsf is modifed by do_div: copy it */
+	interval_tm = beacon_int * TIME_UNIT;
+	rem = do_div(tsf, interval_tm);
+	ctx->timing.beacon_init_val = cpu_to_le32(interval_tm - rem);
+
+	ctx->timing.dtim_period = vif ? (vif->bss_conf.dtim_period ?: 1) : 1;
+
+	IWL_DEBUG_ASSOC(priv,
+			"beacon interval %d beacon timer %d beacon tim %d\n",
+			le16_to_cpu(ctx->timing.beacon_interval),
+			le32_to_cpu(ctx->timing.beacon_init_val),
+			le16_to_cpu(ctx->timing.atim_window));
+
+	return iwl_dvm_send_cmd_pdu(priv, ctx->rxon_timing_cmd,
+				CMD_SYNC, sizeof(ctx->timing), &ctx->timing);
+}
+
+static int iwlagn_rxon_disconn(struct iwl_priv *priv,
+			       struct iwl_rxon_context *ctx)
+{
+	int ret;
+	struct iwl_rxon_cmd *active = (void *)&ctx->active;
+
+	if (ctx->ctxid == IWL_RXON_CTX_BSS) {
+		ret = iwlagn_disable_bss(priv, ctx, &ctx->staging);
+	} else {
+		ret = iwlagn_disable_pan(priv, ctx, &ctx->staging);
+		if (ret)
+			return ret;
+		if (ctx->vif) {
+			ret = iwl_send_rxon_timing(priv, ctx);
+			if (ret) {
+				IWL_ERR(priv, "Failed to send timing (%d)!\n", ret);
+				return ret;
+			}
+			ret = iwlagn_disconn_pan(priv, ctx, &ctx->staging);
+		}
+	}
+	if (ret)
+		return ret;
+
+	/*
+	 * Un-assoc RXON clears the station table and WEP
+	 * keys, so we have to restore those afterwards.
+	 */
+	iwl_clear_ucode_stations(priv, ctx);
+	/* update -- might need P2P now */
+	iwl_update_bcast_station(priv, ctx);
+	iwl_restore_stations(priv, ctx);
+	ret = iwl_restore_default_wep_keys(priv, ctx);
+	if (ret) {
+		IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
+		return ret;
+	}
+
+	memcpy(active, &ctx->staging, sizeof(*active));
+	return 0;
+}
+
+static int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
+{
+	int ret;
+	s8 prev_tx_power;
+	bool defer;
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+
+	if (priv->calib_disabled & IWL_TX_POWER_CALIB_DISABLED)
+		return 0;
+
+	lockdep_assert_held(&priv->mutex);
+
+	if (priv->tx_power_user_lmt == tx_power && !force)
+		return 0;
+
+	if (tx_power < IWLAGN_TX_POWER_TARGET_POWER_MIN) {
+		IWL_WARN(priv,
+			 "Requested user TXPOWER %d below lower limit %d.\n",
+			 tx_power,
+			 IWLAGN_TX_POWER_TARGET_POWER_MIN);
+		return -EINVAL;
+	}
+
+	if (tx_power > DIV_ROUND_UP(priv->eeprom_data->max_tx_pwr_half_dbm, 2)) {
+		IWL_WARN(priv,
+			"Requested user TXPOWER %d above upper limit %d.\n",
+			 tx_power, priv->eeprom_data->max_tx_pwr_half_dbm);
+		return -EINVAL;
+	}
+
+	if (!iwl_is_ready_rf(priv))
+		return -EIO;
+
+	/* scan complete and commit_rxon use tx_power_next value,
+	 * it always need to be updated for newest request */
+	priv->tx_power_next = tx_power;
+
+	/* do not set tx power when scanning or channel changing */
+	defer = test_bit(STATUS_SCANNING, &priv->status) ||
+		memcmp(&ctx->active, &ctx->staging, sizeof(ctx->staging));
+	if (defer && !force) {
+		IWL_DEBUG_INFO(priv, "Deferring tx power set\n");
+		return 0;
+	}
+
+	prev_tx_power = priv->tx_power_user_lmt;
+	priv->tx_power_user_lmt = tx_power;
+
+	ret = iwlagn_send_tx_power(priv);
+
+	/* if fail to set tx_power, restore the orig. tx power */
+	if (ret) {
+		priv->tx_power_user_lmt = prev_tx_power;
+		priv->tx_power_next = prev_tx_power;
+	}
+	return ret;
+}
+
+static int iwlagn_rxon_connect(struct iwl_priv *priv,
+			       struct iwl_rxon_context *ctx)
+{
+	int ret;
+	struct iwl_rxon_cmd *active = (void *)&ctx->active;
+
+	/* RXON timing must be before associated RXON */
+	if (ctx->ctxid == IWL_RXON_CTX_BSS) {
+		ret = iwl_send_rxon_timing(priv, ctx);
+		if (ret) {
+			IWL_ERR(priv, "Failed to send timing (%d)!\n", ret);
+			return ret;
+		}
+	}
+	/* QoS info may be cleared by previous un-assoc RXON */
+	iwlagn_update_qos(priv, ctx);
+
+	/*
+	 * We'll run into this code path when beaconing is
+	 * enabled, but then we also need to send the beacon
+	 * to the device.
+	 */
+	if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_AP)) {
+		ret = iwlagn_update_beacon(priv, ctx->vif);
+		if (ret) {
+			IWL_ERR(priv,
+				"Error sending required beacon (%d)!\n",
+				ret);
+			return ret;
+		}
+	}
+
+	priv->start_calib = 0;
+	/*
+	 * Apply the new configuration.
+	 *
+	 * Associated RXON doesn't clear the station table in uCode,
+	 * so we don't need to restore stations etc. after this.
+	 */
+	ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd, CMD_SYNC,
+		      sizeof(struct iwl_rxon_cmd), &ctx->staging);
+	if (ret) {
+		IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
+		return ret;
+	}
+	memcpy(active, &ctx->staging, sizeof(*active));
+
+	/* IBSS beacon needs to be sent after setting assoc */
+	if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_ADHOC))
+		if (iwlagn_update_beacon(priv, ctx->vif))
+			IWL_ERR(priv, "Error sending IBSS beacon\n");
+	iwl_init_sensitivity(priv);
+
+	/*
+	 * If we issue a new RXON command which required a tune then
+	 * we must send a new TXPOWER command or we won't be able to
+	 * Tx any frames.
+	 *
+	 * It's expected we set power here if channel is changing.
+	 */
+	ret = iwl_set_tx_power(priv, priv->tx_power_next, true);
+	if (ret) {
+		IWL_ERR(priv, "Error sending TX power (%d)\n", ret);
+		return ret;
+	}
+
+	if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION &&
+	    priv->cfg->ht_params && priv->cfg->ht_params->smps_mode)
+		ieee80211_request_smps(ctx->vif,
+				       priv->cfg->ht_params->smps_mode);
+
+	return 0;
+}
+
+int iwlagn_set_pan_params(struct iwl_priv *priv)
+{
+	struct iwl_wipan_params_cmd cmd;
+	struct iwl_rxon_context *ctx_bss, *ctx_pan;
+	int slot0 = 300, slot1 = 0;
+	int ret;
+
+	if (priv->valid_contexts == BIT(IWL_RXON_CTX_BSS))
+		return 0;
+
+	BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
+
+	lockdep_assert_held(&priv->mutex);
+
+	ctx_bss = &priv->contexts[IWL_RXON_CTX_BSS];
+	ctx_pan = &priv->contexts[IWL_RXON_CTX_PAN];
+
+	/*
+	 * If the PAN context is inactive, then we don't need
+	 * to update the PAN parameters, the last thing we'll
+	 * have done before it goes inactive is making the PAN
+	 * parameters be WLAN-only.
+	 */
+	if (!ctx_pan->is_active)
+		return 0;
+
+	memset(&cmd, 0, sizeof(cmd));
+
+	/* only 2 slots are currently allowed */
+	cmd.num_slots = 2;
+
+	cmd.slots[0].type = 0; /* BSS */
+	cmd.slots[1].type = 1; /* PAN */
+
+	if (priv->hw_roc_setup) {
+		/* both contexts must be used for this to happen */
+		slot1 = IWL_MIN_SLOT_TIME;
+		slot0 = 3000;
+	} else if (ctx_bss->vif && ctx_pan->vif) {
+		int bcnint = ctx_pan->beacon_int;
+		int dtim = ctx_pan->vif->bss_conf.dtim_period ?: 1;
+
+		/* should be set, but seems unused?? */
+		cmd.flags |= cpu_to_le16(IWL_WIPAN_PARAMS_FLG_SLOTTED_MODE);
+
+		if (ctx_pan->vif->type == NL80211_IFTYPE_AP &&
+		    bcnint &&
+		    bcnint != ctx_bss->beacon_int) {
+			IWL_ERR(priv,
+				"beacon intervals don't match (%d, %d)\n",
+				ctx_bss->beacon_int, ctx_pan->beacon_int);
+		} else
+			bcnint = max_t(int, bcnint,
+				       ctx_bss->beacon_int);
+		if (!bcnint)
+			bcnint = DEFAULT_BEACON_INTERVAL;
+		slot0 = bcnint / 2;
+		slot1 = bcnint - slot0;
+
+		if (test_bit(STATUS_SCAN_HW, &priv->status) ||
+		    (!ctx_bss->vif->bss_conf.idle &&
+		     !ctx_bss->vif->bss_conf.assoc)) {
+			slot0 = dtim * bcnint * 3 - IWL_MIN_SLOT_TIME;
+			slot1 = IWL_MIN_SLOT_TIME;
+		} else if (!ctx_pan->vif->bss_conf.idle &&
+			   !ctx_pan->vif->bss_conf.assoc) {
+			slot1 = dtim * bcnint * 3 - IWL_MIN_SLOT_TIME;
+			slot0 = IWL_MIN_SLOT_TIME;
+		}
+	} else if (ctx_pan->vif) {
+		slot0 = 0;
+		slot1 = max_t(int, 1, ctx_pan->vif->bss_conf.dtim_period) *
+					ctx_pan->beacon_int;
+		slot1 = max_t(int, DEFAULT_BEACON_INTERVAL, slot1);
+
+		if (test_bit(STATUS_SCAN_HW, &priv->status)) {
+			slot0 = slot1 * 3 - IWL_MIN_SLOT_TIME;
+			slot1 = IWL_MIN_SLOT_TIME;
+		}
+	}
+
+	cmd.slots[0].width = cpu_to_le16(slot0);
+	cmd.slots[1].width = cpu_to_le16(slot1);
+
+	ret = iwl_dvm_send_cmd_pdu(priv, REPLY_WIPAN_PARAMS, CMD_SYNC,
+			sizeof(cmd), &cmd);
+	if (ret)
+		IWL_ERR(priv, "Error setting PAN parameters (%d)\n", ret);
+
+	return ret;
+}
+
+static void _iwl_set_rxon_ht(struct iwl_priv *priv,
+			     struct iwl_ht_config *ht_conf,
+			     struct iwl_rxon_context *ctx)
+{
+	struct iwl_rxon_cmd *rxon = &ctx->staging;
+
+	if (!ctx->ht.enabled) {
+		rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK |
+			RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK |
+			RXON_FLG_HT40_PROT_MSK |
+			RXON_FLG_HT_PROT_MSK);
+		return;
+	}
+
+	/* FIXME: if the definition of ht.protection changed, the "translation"
+	 * will be needed for rxon->flags
+	 */
+	rxon->flags |= cpu_to_le32(ctx->ht.protection <<
+				   RXON_FLG_HT_OPERATING_MODE_POS);
+
+	/* Set up channel bandwidth:
+	 * 20 MHz only, 20/40 mixed or pure 40 if ht40 ok */
+	/* clear the HT channel mode before set the mode */
+	rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK |
+			 RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
+	if (iwl_is_ht40_tx_allowed(priv, ctx, NULL)) {
+		/* pure ht40 */
+		if (ctx->ht.protection ==
+		    IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) {
+			rxon->flags |= RXON_FLG_CHANNEL_MODE_PURE_40;
+			/*
+			 * Note: control channel is opposite of extension
+			 * channel
+			 */
+			switch (ctx->ht.extension_chan_offset) {
+			case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+				rxon->flags &=
+					~RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
+				break;
+			case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+				rxon->flags |=
+					RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
+				break;
+			}
+		} else {
+			/*
+			 * Note: control channel is opposite of extension
+			 * channel
+			 */
+			switch (ctx->ht.extension_chan_offset) {
+			case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+				rxon->flags &=
+					~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
+				rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED;
+				break;
+			case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+				rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
+				rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED;
+				break;
+			case IEEE80211_HT_PARAM_CHA_SEC_NONE:
+			default:
+				/*
+				 * channel location only valid if in Mixed
+				 * mode
+				 */
+				IWL_ERR(priv,
+					"invalid extension channel offset\n");
+				break;
+			}
+		}
+	} else {
+		rxon->flags |= RXON_FLG_CHANNEL_MODE_LEGACY;
+	}
+
+	iwlagn_set_rxon_chain(priv, ctx);
+
+	IWL_DEBUG_ASSOC(priv, "rxon flags 0x%X operation mode :0x%X "
+			"extension channel offset 0x%x\n",
+			le32_to_cpu(rxon->flags), ctx->ht.protection,
+			ctx->ht.extension_chan_offset);
+}
+
+void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf)
+{
+	struct iwl_rxon_context *ctx;
+
+	for_each_context(priv, ctx)
+		_iwl_set_rxon_ht(priv, ht_conf, ctx);
+}
+
+/**
+ * iwl_set_rxon_channel - Set the band and channel values in staging RXON
+ * @ch: requested channel as a pointer to struct ieee80211_channel
+
+ * NOTE:  Does not commit to the hardware; it sets appropriate bit fields
+ * in the staging RXON flag structure based on the ch->band
+ */
+void iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch,
+			 struct iwl_rxon_context *ctx)
+{
+	enum ieee80211_band band = ch->band;
+	u16 channel = ch->hw_value;
+
+	if ((le16_to_cpu(ctx->staging.channel) == channel) &&
+	    (priv->band == band))
+		return;
+
+	ctx->staging.channel = cpu_to_le16(channel);
+	if (band == IEEE80211_BAND_5GHZ)
+		ctx->staging.flags &= ~RXON_FLG_BAND_24G_MSK;
+	else
+		ctx->staging.flags |= RXON_FLG_BAND_24G_MSK;
+
+	priv->band = band;
+
+	IWL_DEBUG_INFO(priv, "Staging channel set to %d [%d]\n", channel, band);
+
+}
+
+void iwl_set_flags_for_band(struct iwl_priv *priv,
+			    struct iwl_rxon_context *ctx,
+			    enum ieee80211_band band,
+			    struct ieee80211_vif *vif)
+{
+	if (band == IEEE80211_BAND_5GHZ) {
+		ctx->staging.flags &=
+		    ~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK
+		      | RXON_FLG_CCK_MSK);
+		ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
+	} else {
+		/* Copied from iwl_post_associate() */
+		if (vif && vif->bss_conf.use_short_slot)
+			ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
+		else
+			ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
+
+		ctx->staging.flags |= RXON_FLG_BAND_24G_MSK;
+		ctx->staging.flags |= RXON_FLG_AUTO_DETECT_MSK;
+		ctx->staging.flags &= ~RXON_FLG_CCK_MSK;
+	}
+}
+
+static void iwl_set_rxon_hwcrypto(struct iwl_priv *priv,
+				  struct iwl_rxon_context *ctx, int hw_decrypt)
+{
+	struct iwl_rxon_cmd *rxon = &ctx->staging;
+
+	if (hw_decrypt)
+		rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK;
+	else
+		rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK;
+
+}
+
+/* validate RXON structure is valid */
+static int iwl_check_rxon_cmd(struct iwl_priv *priv,
+			      struct iwl_rxon_context *ctx)
+{
+	struct iwl_rxon_cmd *rxon = &ctx->staging;
+	u32 errors = 0;
+
+	if (rxon->flags & RXON_FLG_BAND_24G_MSK) {
+		if (rxon->flags & RXON_FLG_TGJ_NARROW_BAND_MSK) {
+			IWL_WARN(priv, "check 2.4G: wrong narrow\n");
+			errors |= BIT(0);
+		}
+		if (rxon->flags & RXON_FLG_RADAR_DETECT_MSK) {
+			IWL_WARN(priv, "check 2.4G: wrong radar\n");
+			errors |= BIT(1);
+		}
+	} else {
+		if (!(rxon->flags & RXON_FLG_SHORT_SLOT_MSK)) {
+			IWL_WARN(priv, "check 5.2G: not short slot!\n");
+			errors |= BIT(2);
+		}
+		if (rxon->flags & RXON_FLG_CCK_MSK) {
+			IWL_WARN(priv, "check 5.2G: CCK!\n");
+			errors |= BIT(3);
+		}
+	}
+	if ((rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1) {
+		IWL_WARN(priv, "mac/bssid mcast!\n");
+		errors |= BIT(4);
+	}
+
+	/* make sure basic rates 6Mbps and 1Mbps are supported */
+	if ((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0 &&
+	    (rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0) {
+		IWL_WARN(priv, "neither 1 nor 6 are basic\n");
+		errors |= BIT(5);
+	}
+
+	if (le16_to_cpu(rxon->assoc_id) > 2007) {
+		IWL_WARN(priv, "aid > 2007\n");
+		errors |= BIT(6);
+	}
+
+	if ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK))
+			== (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) {
+		IWL_WARN(priv, "CCK and short slot\n");
+		errors |= BIT(7);
+	}
+
+	if ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK))
+			== (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) {
+		IWL_WARN(priv, "CCK and auto detect");
+		errors |= BIT(8);
+	}
+
+	if ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK |
+			    RXON_FLG_TGG_PROTECT_MSK)) ==
+			    RXON_FLG_TGG_PROTECT_MSK) {
+		IWL_WARN(priv, "TGg but no auto-detect\n");
+		errors |= BIT(9);
+	}
+
+	if (rxon->channel == 0) {
+		IWL_WARN(priv, "zero channel is invalid\n");
+		errors |= BIT(10);
+	}
+
+	WARN(errors, "Invalid RXON (%#x), channel %d",
+	     errors, le16_to_cpu(rxon->channel));
+
+	return errors ? -EINVAL : 0;
+}
+
+/**
+ * iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
+ * @priv: staging_rxon is compared to active_rxon
+ *
+ * If the RXON structure is changing enough to require a new tune,
+ * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that
+ * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required.
+ */
+static int iwl_full_rxon_required(struct iwl_priv *priv,
+				  struct iwl_rxon_context *ctx)
+{
+	const struct iwl_rxon_cmd *staging = &ctx->staging;
+	const struct iwl_rxon_cmd *active = &ctx->active;
+
+#define CHK(cond)							\
+	if ((cond)) {							\
+		IWL_DEBUG_INFO(priv, "need full RXON - " #cond "\n");	\
+		return 1;						\
+	}
+
+#define CHK_NEQ(c1, c2)						\
+	if ((c1) != (c2)) {					\
+		IWL_DEBUG_INFO(priv, "need full RXON - "	\
+			       #c1 " != " #c2 " - %d != %d\n",	\
+			       (c1), (c2));			\
+		return 1;					\
+	}
+
+	/* These items are only settable from the full RXON command */
+	CHK(!iwl_is_associated_ctx(ctx));
+	CHK(!ether_addr_equal(staging->bssid_addr, active->bssid_addr));
+	CHK(!ether_addr_equal(staging->node_addr, active->node_addr));
+	CHK(!ether_addr_equal(staging->wlap_bssid_addr,
+			      active->wlap_bssid_addr));
+	CHK_NEQ(staging->dev_type, active->dev_type);
+	CHK_NEQ(staging->channel, active->channel);
+	CHK_NEQ(staging->air_propagation, active->air_propagation);
+	CHK_NEQ(staging->ofdm_ht_single_stream_basic_rates,
+		active->ofdm_ht_single_stream_basic_rates);
+	CHK_NEQ(staging->ofdm_ht_dual_stream_basic_rates,
+		active->ofdm_ht_dual_stream_basic_rates);
+	CHK_NEQ(staging->ofdm_ht_triple_stream_basic_rates,
+		active->ofdm_ht_triple_stream_basic_rates);
+	CHK_NEQ(staging->assoc_id, active->assoc_id);
+
+	/* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can
+	 * be updated with the RXON_ASSOC command -- however only some
+	 * flag transitions are allowed using RXON_ASSOC */
+
+	/* Check if we are not switching bands */
+	CHK_NEQ(staging->flags & RXON_FLG_BAND_24G_MSK,
+		active->flags & RXON_FLG_BAND_24G_MSK);
+
+	/* Check if we are switching association toggle */
+	CHK_NEQ(staging->filter_flags & RXON_FILTER_ASSOC_MSK,
+		active->filter_flags & RXON_FILTER_ASSOC_MSK);
+
+#undef CHK
+#undef CHK_NEQ
+
+	return 0;
+}
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+void iwl_print_rx_config_cmd(struct iwl_priv *priv,
+			     enum iwl_rxon_context_id ctxid)
+{
+	struct iwl_rxon_context *ctx = &priv->contexts[ctxid];
+	struct iwl_rxon_cmd *rxon = &ctx->staging;
+
+	IWL_DEBUG_RADIO(priv, "RX CONFIG:\n");
+	iwl_print_hex_dump(priv, IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon));
+	IWL_DEBUG_RADIO(priv, "u16 channel: 0x%x\n",
+			le16_to_cpu(rxon->channel));
+	IWL_DEBUG_RADIO(priv, "u32 flags: 0x%08X\n",
+			le32_to_cpu(rxon->flags));
+	IWL_DEBUG_RADIO(priv, "u32 filter_flags: 0x%08x\n",
+			le32_to_cpu(rxon->filter_flags));
+	IWL_DEBUG_RADIO(priv, "u8 dev_type: 0x%x\n", rxon->dev_type);
+	IWL_DEBUG_RADIO(priv, "u8 ofdm_basic_rates: 0x%02x\n",
+			rxon->ofdm_basic_rates);
+	IWL_DEBUG_RADIO(priv, "u8 cck_basic_rates: 0x%02x\n",
+			rxon->cck_basic_rates);
+	IWL_DEBUG_RADIO(priv, "u8[6] node_addr: %pM\n", rxon->node_addr);
+	IWL_DEBUG_RADIO(priv, "u8[6] bssid_addr: %pM\n", rxon->bssid_addr);
+	IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n",
+			le16_to_cpu(rxon->assoc_id));
+}
+#endif
+
+static void iwl_calc_basic_rates(struct iwl_priv *priv,
+				 struct iwl_rxon_context *ctx)
+{
+	int lowest_present_ofdm = 100;
+	int lowest_present_cck = 100;
+	u8 cck = 0;
+	u8 ofdm = 0;
+
+	if (ctx->vif) {
+		struct ieee80211_supported_band *sband;
+		unsigned long basic = ctx->vif->bss_conf.basic_rates;
+		int i;
+
+		sband = priv->hw->wiphy->bands[priv->hw->conf.channel->band];
+
+		for_each_set_bit(i, &basic, BITS_PER_LONG) {
+			int hw = sband->bitrates[i].hw_value;
+			if (hw >= IWL_FIRST_OFDM_RATE) {
+				ofdm |= BIT(hw - IWL_FIRST_OFDM_RATE);
+				if (lowest_present_ofdm > hw)
+					lowest_present_ofdm = hw;
+			} else {
+				BUILD_BUG_ON(IWL_FIRST_CCK_RATE != 0);
+
+				cck |= BIT(hw);
+				if (lowest_present_cck > hw)
+					lowest_present_cck = hw;
+			}
+		}
+	}
+
+	/*
+	 * Now we've got the basic rates as bitmaps in the ofdm and cck
+	 * variables. This isn't sufficient though, as there might not
+	 * be all the right rates in the bitmap. E.g. if the only basic
+	 * rates are 5.5 Mbps and 11 Mbps, we still need to add 1 Mbps
+	 * and 6 Mbps because the 802.11-2007 standard says in 9.6:
+	 *
+	 *    [...] a STA responding to a received frame shall transmit
+	 *    its Control Response frame [...] at the highest rate in the
+	 *    BSSBasicRateSet parameter that is less than or equal to the
+	 *    rate of the immediately previous frame in the frame exchange
+	 *    sequence ([...]) and that is of the same modulation class
+	 *    ([...]) as the received frame. If no rate contained in the
+	 *    BSSBasicRateSet parameter meets these conditions, then the
+	 *    control frame sent in response to a received frame shall be
+	 *    transmitted at the highest mandatory rate of the PHY that is
+	 *    less than or equal to the rate of the received frame, and
+	 *    that is of the same modulation class as the received frame.
+	 *
+	 * As a consequence, we need to add all mandatory rates that are
+	 * lower than all of the basic rates to these bitmaps.
+	 */
+
+	if (IWL_RATE_24M_INDEX < lowest_present_ofdm)
+		ofdm |= IWL_RATE_24M_MASK >> IWL_FIRST_OFDM_RATE;
+	if (IWL_RATE_12M_INDEX < lowest_present_ofdm)
+		ofdm |= IWL_RATE_12M_MASK >> IWL_FIRST_OFDM_RATE;
+	/* 6M already there or needed so always add */
+	ofdm |= IWL_RATE_6M_MASK >> IWL_FIRST_OFDM_RATE;
+
+	/*
+	 * CCK is a bit more complex with DSSS vs. HR/DSSS vs. ERP.
+	 * Note, however:
+	 *  - if no CCK rates are basic, it must be ERP since there must
+	 *    be some basic rates at all, so they're OFDM => ERP PHY
+	 *    (or we're in 5 GHz, and the cck bitmap will never be used)
+	 *  - if 11M is a basic rate, it must be ERP as well, so add 5.5M
+	 *  - if 5.5M is basic, 1M and 2M are mandatory
+	 *  - if 2M is basic, 1M is mandatory
+	 *  - if 1M is basic, that's the only valid ACK rate.
+	 * As a consequence, it's not as complicated as it sounds, just add
+	 * any lower rates to the ACK rate bitmap.
+	 */
+	if (IWL_RATE_11M_INDEX < lowest_present_ofdm)
+		ofdm |= IWL_RATE_11M_MASK >> IWL_FIRST_CCK_RATE;
+	if (IWL_RATE_5M_INDEX < lowest_present_ofdm)
+		ofdm |= IWL_RATE_5M_MASK >> IWL_FIRST_CCK_RATE;
+	if (IWL_RATE_2M_INDEX < lowest_present_ofdm)
+		ofdm |= IWL_RATE_2M_MASK >> IWL_FIRST_CCK_RATE;
+	/* 1M already there or needed so always add */
+	cck |= IWL_RATE_1M_MASK >> IWL_FIRST_CCK_RATE;
+
+	IWL_DEBUG_RATE(priv, "Set basic rates cck:0x%.2x ofdm:0x%.2x\n",
+		       cck, ofdm);
+
+	/* "basic_rates" is a misnomer here -- should be called ACK rates */
+	ctx->staging.cck_basic_rates = cck;
+	ctx->staging.ofdm_basic_rates = ofdm;
+}
+
+/**
+ * iwlagn_commit_rxon - commit staging_rxon to hardware
+ *
+ * The RXON command in staging_rxon is committed to the hardware and
+ * the active_rxon structure is updated with the new data.  This
+ * function correctly transitions out of the RXON_ASSOC_MSK state if
+ * a HW tune is required based on the RXON structure changes.
+ *
+ * The connect/disconnect flow should be as the following:
+ *
+ * 1. make sure send RXON command with association bit unset if not connect
+ *	this should include the channel and the band for the candidate
+ *	to be connected to
+ * 2. Add Station before RXON association with the AP
+ * 3. RXON_timing has to send before RXON for connection
+ * 4. full RXON command - associated bit set
+ * 5. use RXON_ASSOC command to update any flags changes
+ */
+int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
+{
+	/* cast away the const for active_rxon in this function */
+	struct iwl_rxon_cmd *active = (void *)&ctx->active;
+	bool new_assoc = !!(ctx->staging.filter_flags & RXON_FILTER_ASSOC_MSK);
+	int ret;
+
+	lockdep_assert_held(&priv->mutex);
+
+	if (!iwl_is_alive(priv))
+		return -EBUSY;
+
+	/* This function hardcodes a bunch of dual-mode assumptions */
+	BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
+
+	if (!ctx->is_active)
+		return 0;
+
+	/* always get timestamp with Rx frame */
+	ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK;
+
+	/* recalculate basic rates */
+	iwl_calc_basic_rates(priv, ctx);
+
+	/*
+	 * force CTS-to-self frames protection if RTS-CTS is not preferred
+	 * one aggregation protection method
+	 */
+	if (!priv->hw_params.use_rts_for_aggregation)
+		ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
+
+	if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) ||
+	    !(ctx->staging.flags & RXON_FLG_BAND_24G_MSK))
+		ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
+	else
+		ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
+
+	iwl_print_rx_config_cmd(priv, ctx->ctxid);
+	ret = iwl_check_rxon_cmd(priv, ctx);
+	if (ret) {
+		IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * receive commit_rxon request
+	 * abort any previous channel switch if still in process
+	 */
+	if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status) &&
+	    (priv->switch_channel != ctx->staging.channel)) {
+		IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
+			      le16_to_cpu(priv->switch_channel));
+		iwl_chswitch_done(priv, false);
+	}
+
+	/*
+	 * If we don't need to send a full RXON, we can use
+	 * iwl_rxon_assoc_cmd which is used to reconfigure filter
+	 * and other flags for the current radio configuration.
+	 */
+	if (!iwl_full_rxon_required(priv, ctx)) {
+		ret = iwlagn_send_rxon_assoc(priv, ctx);
+		if (ret) {
+			IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret);
+			return ret;
+		}
+
+		memcpy(active, &ctx->staging, sizeof(*active));
+		/*
+		 * We do not commit tx power settings while channel changing,
+		 * do it now if after settings changed.
+		 */
+		iwl_set_tx_power(priv, priv->tx_power_next, false);
+
+		/* make sure we are in the right PS state */
+		iwl_power_update_mode(priv, true);
+
+		return 0;
+	}
+
+	iwl_set_rxon_hwcrypto(priv, ctx, !iwlwifi_mod_params.sw_crypto);
+
+	IWL_DEBUG_INFO(priv,
+		       "Going to commit RXON\n"
+		       "  * with%s RXON_FILTER_ASSOC_MSK\n"
+		       "  * channel = %d\n"
+		       "  * bssid = %pM\n",
+		       (new_assoc ? "" : "out"),
+		       le16_to_cpu(ctx->staging.channel),
+		       ctx->staging.bssid_addr);
+
+	/*
+	 * Always clear associated first, but with the correct config.
+	 * This is required as for example station addition for the
+	 * AP station must be done after the BSSID is set to correctly
+	 * set up filters in the device.
+	 */
+	ret = iwlagn_rxon_disconn(priv, ctx);
+	if (ret)
+		return ret;
+
+	ret = iwlagn_set_pan_params(priv);
+	if (ret)
+		return ret;
+
+	if (new_assoc)
+		return iwlagn_rxon_connect(priv, ctx);
+
+	return 0;
+}
+
+void iwlagn_config_ht40(struct ieee80211_conf *conf,
+	struct iwl_rxon_context *ctx)
+{
+	if (conf_is_ht40_minus(conf)) {
+		ctx->ht.extension_chan_offset =
+			IEEE80211_HT_PARAM_CHA_SEC_BELOW;
+		ctx->ht.is_40mhz = true;
+	} else if (conf_is_ht40_plus(conf)) {
+		ctx->ht.extension_chan_offset =
+			IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
+		ctx->ht.is_40mhz = true;
+	} else {
+		ctx->ht.extension_chan_offset =
+			IEEE80211_HT_PARAM_CHA_SEC_NONE;
+		ctx->ht.is_40mhz = false;
+	}
+}
+
+int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	struct iwl_rxon_context *ctx;
+	struct ieee80211_conf *conf = &hw->conf;
+	struct ieee80211_channel *channel = conf->channel;
+	int ret = 0;
+
+	IWL_DEBUG_MAC80211(priv, "enter: changed %#x\n", changed);
+
+	mutex_lock(&priv->mutex);
+
+	if (unlikely(test_bit(STATUS_SCANNING, &priv->status))) {
+		IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
+		goto out;
+	}
+
+	if (!iwl_is_ready(priv)) {
+		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
+		goto out;
+	}
+
+	if (changed & (IEEE80211_CONF_CHANGE_SMPS |
+		       IEEE80211_CONF_CHANGE_CHANNEL)) {
+		/* mac80211 uses static for non-HT which is what we want */
+		priv->current_ht_config.smps = conf->smps_mode;
+
+		/*
+		 * Recalculate chain counts.
+		 *
+		 * If monitor mode is enabled then mac80211 will
+		 * set up the SM PS mode to OFF if an HT channel is
+		 * configured.
+		 */
+		for_each_context(priv, ctx)
+			iwlagn_set_rxon_chain(priv, ctx);
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+		for_each_context(priv, ctx) {
+			/* Configure HT40 channels */
+			if (ctx->ht.enabled != conf_is_ht(conf))
+				ctx->ht.enabled = conf_is_ht(conf);
+
+			if (ctx->ht.enabled) {
+				/* if HT40 is used, it should not change
+				 * after associated except channel switch */
+				if (!ctx->ht.is_40mhz ||
+						!iwl_is_associated_ctx(ctx))
+					iwlagn_config_ht40(conf, ctx);
+			} else
+				ctx->ht.is_40mhz = false;
+
+			/*
+			 * Default to no protection. Protection mode will
+			 * later be set from BSS config in iwl_ht_conf
+			 */
+			ctx->ht.protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE;
+
+			/* if we are switching from ht to 2.4 clear flags
+			 * from any ht related info since 2.4 does not
+			 * support ht */
+			if (le16_to_cpu(ctx->staging.channel) !=
+			    channel->hw_value)
+				ctx->staging.flags = 0;
+
+			iwl_set_rxon_channel(priv, channel, ctx);
+			iwl_set_rxon_ht(priv, &priv->current_ht_config);
+
+			iwl_set_flags_for_band(priv, ctx, channel->band,
+					       ctx->vif);
+		}
+
+		iwl_update_bcast_stations(priv);
+	}
+
+	if (changed & (IEEE80211_CONF_CHANGE_PS |
+			IEEE80211_CONF_CHANGE_IDLE)) {
+		ret = iwl_power_update_mode(priv, false);
+		if (ret)
+			IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n");
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_POWER) {
+		IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
+			priv->tx_power_user_lmt, conf->power_level);
+
+		iwl_set_tx_power(priv, conf->power_level, false);
+	}
+
+	for_each_context(priv, ctx) {
+		if (!memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
+			continue;
+		iwlagn_commit_rxon(priv, ctx);
+	}
+ out:
+	mutex_unlock(&priv->mutex);
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+
+	return ret;
+}
+
+static void iwlagn_check_needed_chains(struct iwl_priv *priv,
+				       struct iwl_rxon_context *ctx,
+				       struct ieee80211_bss_conf *bss_conf)
+{
+	struct ieee80211_vif *vif = ctx->vif;
+	struct iwl_rxon_context *tmp;
+	struct ieee80211_sta *sta;
+	struct iwl_ht_config *ht_conf = &priv->current_ht_config;
+	struct ieee80211_sta_ht_cap *ht_cap;
+	bool need_multiple;
+
+	lockdep_assert_held(&priv->mutex);
+
+	switch (vif->type) {
+	case NL80211_IFTYPE_STATION:
+		rcu_read_lock();
+		sta = ieee80211_find_sta(vif, bss_conf->bssid);
+		if (!sta) {
+			/*
+			 * If at all, this can only happen through a race
+			 * when the AP disconnects us while we're still
+			 * setting up the connection, in that case mac80211
+			 * will soon tell us about that.
+			 */
+			need_multiple = false;
+			rcu_read_unlock();
+			break;
+		}
+
+		ht_cap = &sta->ht_cap;
+
+		need_multiple = true;
+
+		/*
+		 * If the peer advertises no support for receiving 2 and 3
+		 * stream MCS rates, it can't be transmitting them either.
+		 */
+		if (ht_cap->mcs.rx_mask[1] == 0 &&
+		    ht_cap->mcs.rx_mask[2] == 0) {
+			need_multiple = false;
+		} else if (!(ht_cap->mcs.tx_params &
+						IEEE80211_HT_MCS_TX_DEFINED)) {
+			/* If it can't TX MCS at all ... */
+			need_multiple = false;
+		} else if (ht_cap->mcs.tx_params &
+						IEEE80211_HT_MCS_TX_RX_DIFF) {
+			int maxstreams;
+
+			/*
+			 * But if it can receive them, it might still not
+			 * be able to transmit them, which is what we need
+			 * to check here -- so check the number of streams
+			 * it advertises for TX (if different from RX).
+			 */
+
+			maxstreams = (ht_cap->mcs.tx_params &
+				 IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK);
+			maxstreams >>=
+				IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
+			maxstreams += 1;
+
+			if (maxstreams <= 1)
+				need_multiple = false;
+		}
+
+		rcu_read_unlock();
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		/* currently */
+		need_multiple = false;
+		break;
+	default:
+		/* only AP really */
+		need_multiple = true;
+		break;
+	}
+
+	ctx->ht_need_multiple_chains = need_multiple;
+
+	if (!need_multiple) {
+		/* check all contexts */
+		for_each_context(priv, tmp) {
+			if (!tmp->vif)
+				continue;
+			if (tmp->ht_need_multiple_chains) {
+				need_multiple = true;
+				break;
+			}
+		}
+	}
+
+	ht_conf->single_chain_sufficient = !need_multiple;
+}
+
+static void iwlagn_chain_noise_reset(struct iwl_priv *priv)
+{
+	struct iwl_chain_noise_data *data = &priv->chain_noise_data;
+	int ret;
+
+	if (!(priv->calib_disabled & IWL_CHAIN_NOISE_CALIB_DISABLED))
+		return;
+
+	if ((data->state == IWL_CHAIN_NOISE_ALIVE) &&
+	    iwl_is_any_associated(priv)) {
+		struct iwl_calib_chain_noise_reset_cmd cmd;
+
+		/* clear data for chain noise calibration algorithm */
+		data->chain_noise_a = 0;
+		data->chain_noise_b = 0;
+		data->chain_noise_c = 0;
+		data->chain_signal_a = 0;
+		data->chain_signal_b = 0;
+		data->chain_signal_c = 0;
+		data->beacon_count = 0;
+
+		memset(&cmd, 0, sizeof(cmd));
+		iwl_set_calib_hdr(&cmd.hdr,
+			priv->phy_calib_chain_noise_reset_cmd);
+		ret = iwl_dvm_send_cmd_pdu(priv,
+					REPLY_PHY_CALIBRATION_CMD,
+					CMD_SYNC, sizeof(cmd), &cmd);
+		if (ret)
+			IWL_ERR(priv,
+				"Could not send REPLY_PHY_CALIBRATION_CMD\n");
+		data->state = IWL_CHAIN_NOISE_ACCUMULATE;
+		IWL_DEBUG_CALIB(priv, "Run chain_noise_calibrate\n");
+	}
+}
+
+void iwlagn_bss_info_changed(struct ieee80211_hw *hw,
+			     struct ieee80211_vif *vif,
+			     struct ieee80211_bss_conf *bss_conf,
+			     u32 changes)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
+	int ret;
+	bool force = false;
+
+	mutex_lock(&priv->mutex);
+
+	if (unlikely(!iwl_is_ready(priv))) {
+		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
+		mutex_unlock(&priv->mutex);
+		return;
+        }
+
+	if (unlikely(!ctx->vif)) {
+		IWL_DEBUG_MAC80211(priv, "leave - vif is NULL\n");
+		mutex_unlock(&priv->mutex);
+		return;
+	}
+
+	if (changes & BSS_CHANGED_BEACON_INT)
+		force = true;
+
+	if (changes & BSS_CHANGED_QOS) {
+		ctx->qos_data.qos_active = bss_conf->qos;
+		iwlagn_update_qos(priv, ctx);
+	}
+
+	ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid);
+	if (vif->bss_conf.use_short_preamble)
+		ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
+	else
+		ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+
+	if (changes & BSS_CHANGED_ASSOC) {
+		if (bss_conf->assoc) {
+			priv->timestamp = bss_conf->last_tsf;
+			ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+		} else {
+			/*
+			 * If we disassociate while there are pending
+			 * frames, just wake up the queues and let the
+			 * frames "escape" ... This shouldn't really
+			 * be happening to start with, but we should
+			 * not get stuck in this case either since it
+			 * can happen if userspace gets confused.
+			 */
+			iwlagn_lift_passive_no_rx(priv);
+
+			ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+
+			if (ctx->ctxid == IWL_RXON_CTX_BSS)
+				priv->have_rekey_data = false;
+		}
+
+		iwlagn_bt_coex_rssi_monitor(priv);
+	}
+
+	if (ctx->ht.enabled) {
+		ctx->ht.protection = bss_conf->ht_operation_mode &
+					IEEE80211_HT_OP_MODE_PROTECTION;
+		ctx->ht.non_gf_sta_present = !!(bss_conf->ht_operation_mode &
+					IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
+		iwlagn_check_needed_chains(priv, ctx, bss_conf);
+		iwl_set_rxon_ht(priv, &priv->current_ht_config);
+	}
+
+	iwlagn_set_rxon_chain(priv, ctx);
+
+	if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
+		ctx->staging.flags |= RXON_FLG_TGG_PROTECT_MSK;
+	else
+		ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
+
+	if (bss_conf->use_cts_prot)
+		ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
+	else
+		ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN;
+
+	memcpy(ctx->staging.bssid_addr, bss_conf->bssid, ETH_ALEN);
+
+	if (vif->type == NL80211_IFTYPE_AP ||
+	    vif->type == NL80211_IFTYPE_ADHOC) {
+		if (vif->bss_conf.enable_beacon) {
+			ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+			priv->beacon_ctx = ctx;
+		} else {
+			ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+			priv->beacon_ctx = NULL;
+		}
+	}
+
+	/*
+	 * If the ucode decides to do beacon filtering before
+	 * association, it will lose beacons that are needed
+	 * before sending frames out on passive channels. This
+	 * causes association failures on those channels. Enable
+	 * receiving beacons in such cases.
+	 */
+
+	if (vif->type == NL80211_IFTYPE_STATION) {
+		if (!bss_conf->assoc)
+			ctx->staging.filter_flags |= RXON_FILTER_BCON_AWARE_MSK;
+		else
+			ctx->staging.filter_flags &=
+						    ~RXON_FILTER_BCON_AWARE_MSK;
+	}
+
+	if (force || memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
+		iwlagn_commit_rxon(priv, ctx);
+
+	if (changes & BSS_CHANGED_ASSOC && bss_conf->assoc) {
+		/*
+		 * The chain noise calibration will enable PM upon
+		 * completion. If calibration has already been run
+		 * then we need to enable power management here.
+		 */
+		if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE)
+			iwl_power_update_mode(priv, false);
+
+		/* Enable RX differential gain and sensitivity calibrations */
+		iwlagn_chain_noise_reset(priv);
+		priv->start_calib = 1;
+	}
+
+	if (changes & BSS_CHANGED_IBSS) {
+		ret = iwlagn_manage_ibss_station(priv, vif,
+						 bss_conf->ibss_joined);
+		if (ret)
+			IWL_ERR(priv, "failed to %s IBSS station %pM\n",
+				bss_conf->ibss_joined ? "add" : "remove",
+				bss_conf->bssid);
+	}
+
+	if (changes & BSS_CHANGED_BEACON && vif->type == NL80211_IFTYPE_ADHOC &&
+	    priv->beacon_ctx) {
+		if (iwlagn_update_beacon(priv, vif))
+			IWL_ERR(priv, "Error sending IBSS beacon\n");
+	}
+
+	mutex_unlock(&priv->mutex);
+}
+
+void iwlagn_post_scan(struct iwl_priv *priv)
+{
+	struct iwl_rxon_context *ctx;
+
+	/*
+	 * We do not commit power settings while scan is pending,
+	 * do it now if the settings changed.
+	 */
+	iwl_power_set_mode(priv, &priv->power_data.sleep_cmd_next, false);
+	iwl_set_tx_power(priv, priv->tx_power_next, false);
+
+	/*
+	 * Since setting the RXON may have been deferred while
+	 * performing the scan, fire one off if needed
+	 */
+	for_each_context(priv, ctx)
+		if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
+			iwlagn_commit_rxon(priv, ctx);
+
+	iwlagn_set_pan_params(priv);
+}
diff --git a/drivers/net/wireless/iwlwifi/dvm/scan.c b/drivers/net/wireless/iwlwifi/dvm/scan.c
new file mode 100644
index 00000000000..6633074258c
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/scan.c
@@ -0,0 +1,1170 @@
+/******************************************************************************
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *****************************************************************************/
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/etherdevice.h>
+#include <net/mac80211.h>
+
+#include "dev.h"
+#include "agn.h"
+
+/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
+ * sending probe req.  This should be set long enough to hear probe responses
+ * from more than one AP.  */
+#define IWL_ACTIVE_DWELL_TIME_24    (30)       /* all times in msec */
+#define IWL_ACTIVE_DWELL_TIME_52    (20)
+
+#define IWL_ACTIVE_DWELL_FACTOR_24GHZ (3)
+#define IWL_ACTIVE_DWELL_FACTOR_52GHZ (2)
+
+/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
+ * Must be set longer than active dwell time.
+ * For the most reliable scan, set > AP beacon interval (typically 100msec). */
+#define IWL_PASSIVE_DWELL_TIME_24   (20)       /* all times in msec */
+#define IWL_PASSIVE_DWELL_TIME_52   (10)
+#define IWL_PASSIVE_DWELL_BASE      (100)
+#define IWL_CHANNEL_TUNE_TIME       5
+#define MAX_SCAN_CHANNEL	    50
+
+/* For reset radio, need minimal dwell time only */
+#define IWL_RADIO_RESET_DWELL_TIME	5
+
+static int iwl_send_scan_abort(struct iwl_priv *priv)
+{
+	int ret;
+	struct iwl_host_cmd cmd = {
+		.id = REPLY_SCAN_ABORT_CMD,
+		.flags = CMD_SYNC | CMD_WANT_SKB,
+	};
+	__le32 *status;
+
+	/* Exit instantly with error when device is not ready
+	 * to receive scan abort command or it does not perform
+	 * hardware scan currently */
+	if (!test_bit(STATUS_READY, &priv->status) ||
+	    !test_bit(STATUS_SCAN_HW, &priv->status) ||
+	    test_bit(STATUS_FW_ERROR, &priv->status))
+		return -EIO;
+
+	ret = iwl_dvm_send_cmd(priv, &cmd);
+	if (ret)
+		return ret;
+
+	status = (void *)cmd.resp_pkt->data;
+	if (*status != CAN_ABORT_STATUS) {
+		/* The scan abort will return 1 for success or
+		 * 2 for "failure".  A failure condition can be
+		 * due to simply not being in an active scan which
+		 * can occur if we send the scan abort before we
+		 * the microcode has notified us that a scan is
+		 * completed. */
+		IWL_DEBUG_SCAN(priv, "SCAN_ABORT ret %d.\n",
+			       le32_to_cpu(*status));
+		ret = -EIO;
+	}
+
+	iwl_free_resp(&cmd);
+	return ret;
+}
+
+static void iwl_complete_scan(struct iwl_priv *priv, bool aborted)
+{
+	/* check if scan was requested from mac80211 */
+	if (priv->scan_request) {
+		IWL_DEBUG_SCAN(priv, "Complete scan in mac80211\n");
+		ieee80211_scan_completed(priv->hw, aborted);
+	}
+
+	if (priv->scan_type == IWL_SCAN_ROC)
+		iwl_scan_roc_expired(priv);
+
+	priv->scan_type = IWL_SCAN_NORMAL;
+	priv->scan_vif = NULL;
+	priv->scan_request = NULL;
+}
+
+static void iwl_process_scan_complete(struct iwl_priv *priv)
+{
+	bool aborted;
+
+	lockdep_assert_held(&priv->mutex);
+
+	if (!test_and_clear_bit(STATUS_SCAN_COMPLETE, &priv->status))
+		return;
+
+	IWL_DEBUG_SCAN(priv, "Completed scan.\n");
+
+	cancel_delayed_work(&priv->scan_check);
+
+	aborted = test_and_clear_bit(STATUS_SCAN_ABORTING, &priv->status);
+	if (aborted)
+		IWL_DEBUG_SCAN(priv, "Aborted scan completed.\n");
+
+	if (!test_and_clear_bit(STATUS_SCANNING, &priv->status)) {
+		IWL_DEBUG_SCAN(priv, "Scan already completed.\n");
+		goto out_settings;
+	}
+
+	if (priv->scan_type == IWL_SCAN_ROC)
+		iwl_scan_roc_expired(priv);
+
+	if (priv->scan_type != IWL_SCAN_NORMAL && !aborted) {
+		int err;
+
+		/* Check if mac80211 requested scan during our internal scan */
+		if (priv->scan_request == NULL)
+			goto out_complete;
+
+		/* If so request a new scan */
+		err = iwl_scan_initiate(priv, priv->scan_vif, IWL_SCAN_NORMAL,
+					priv->scan_request->channels[0]->band);
+		if (err) {
+			IWL_DEBUG_SCAN(priv,
+				"failed to initiate pending scan: %d\n", err);
+			aborted = true;
+			goto out_complete;
+		}
+
+		return;
+	}
+
+out_complete:
+	iwl_complete_scan(priv, aborted);
+
+out_settings:
+	/* Can we still talk to firmware ? */
+	if (!iwl_is_ready_rf(priv))
+		return;
+
+	iwlagn_post_scan(priv);
+}
+
+void iwl_force_scan_end(struct iwl_priv *priv)
+{
+	lockdep_assert_held(&priv->mutex);
+
+	if (!test_bit(STATUS_SCANNING, &priv->status)) {
+		IWL_DEBUG_SCAN(priv, "Forcing scan end while not scanning\n");
+		return;
+	}
+
+	IWL_DEBUG_SCAN(priv, "Forcing scan end\n");
+	clear_bit(STATUS_SCANNING, &priv->status);
+	clear_bit(STATUS_SCAN_HW, &priv->status);
+	clear_bit(STATUS_SCAN_ABORTING, &priv->status);
+	clear_bit(STATUS_SCAN_COMPLETE, &priv->status);
+	iwl_complete_scan(priv, true);
+}
+
+static void iwl_do_scan_abort(struct iwl_priv *priv)
+{
+	int ret;
+
+	lockdep_assert_held(&priv->mutex);
+
+	if (!test_bit(STATUS_SCANNING, &priv->status)) {
+		IWL_DEBUG_SCAN(priv, "Not performing scan to abort\n");
+		return;
+	}
+
+	if (test_and_set_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+		IWL_DEBUG_SCAN(priv, "Scan abort in progress\n");
+		return;
+	}
+
+	ret = iwl_send_scan_abort(priv);
+	if (ret) {
+		IWL_DEBUG_SCAN(priv, "Send scan abort failed %d\n", ret);
+		iwl_force_scan_end(priv);
+	} else
+		IWL_DEBUG_SCAN(priv, "Successfully send scan abort\n");
+}
+
+/**
+ * iwl_scan_cancel - Cancel any currently executing HW scan
+ */
+int iwl_scan_cancel(struct iwl_priv *priv)
+{
+	IWL_DEBUG_SCAN(priv, "Queuing abort scan\n");
+	queue_work(priv->workqueue, &priv->abort_scan);
+	return 0;
+}
+
+/**
+ * iwl_scan_cancel_timeout - Cancel any currently executing HW scan
+ * @ms: amount of time to wait (in milliseconds) for scan to abort
+ *
+ */
+void iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(ms);
+
+	lockdep_assert_held(&priv->mutex);
+
+	IWL_DEBUG_SCAN(priv, "Scan cancel timeout\n");
+
+	iwl_do_scan_abort(priv);
+
+	while (time_before_eq(jiffies, timeout)) {
+		if (!test_bit(STATUS_SCAN_HW, &priv->status))
+			goto finished;
+		msleep(20);
+	}
+
+	return;
+
+ finished:
+	/*
+	 * Now STATUS_SCAN_HW is clear. This means that the
+	 * device finished, but the background work is going
+	 * to execute at best as soon as we release the mutex.
+	 * Since we need to be able to issue a new scan right
+	 * after this function returns, run the complete here.
+	 * The STATUS_SCAN_COMPLETE bit will then be cleared
+	 * and prevent the background work from "completing"
+	 * a possible new scan.
+	 */
+	iwl_process_scan_complete(priv);
+}
+
+/* Service response to REPLY_SCAN_CMD (0x80) */
+static int iwl_rx_reply_scan(struct iwl_priv *priv,
+			      struct iwl_rx_cmd_buffer *rxb,
+			      struct iwl_device_cmd *cmd)
+{
+#ifdef CONFIG_IWLWIFI_DEBUG
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl_scanreq_notification *notif = (void *)pkt->data;
+
+	IWL_DEBUG_SCAN(priv, "Scan request status = 0x%x\n", notif->status);
+#endif
+	return 0;
+}
+
+/* Service SCAN_START_NOTIFICATION (0x82) */
+static int iwl_rx_scan_start_notif(struct iwl_priv *priv,
+				    struct iwl_rx_cmd_buffer *rxb,
+				    struct iwl_device_cmd *cmd)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl_scanstart_notification *notif = (void *)pkt->data;
+
+	priv->scan_start_tsf = le32_to_cpu(notif->tsf_low);
+	IWL_DEBUG_SCAN(priv, "Scan start: "
+		       "%d [802.11%s] "
+		       "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
+		       notif->channel,
+		       notif->band ? "bg" : "a",
+		       le32_to_cpu(notif->tsf_high),
+		       le32_to_cpu(notif->tsf_low),
+		       notif->status, notif->beacon_timer);
+
+	if (priv->scan_type == IWL_SCAN_ROC &&
+	    !priv->hw_roc_start_notified) {
+		ieee80211_ready_on_channel(priv->hw);
+		priv->hw_roc_start_notified = true;
+	}
+
+	return 0;
+}
+
+/* Service SCAN_RESULTS_NOTIFICATION (0x83) */
+static int iwl_rx_scan_results_notif(struct iwl_priv *priv,
+				      struct iwl_rx_cmd_buffer *rxb,
+				      struct iwl_device_cmd *cmd)
+{
+#ifdef CONFIG_IWLWIFI_DEBUG
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl_scanresults_notification *notif = (void *)pkt->data;
+
+	IWL_DEBUG_SCAN(priv, "Scan ch.res: "
+		       "%d [802.11%s] "
+		       "probe status: %u:%u "
+		       "(TSF: 0x%08X:%08X) - %d "
+		       "elapsed=%lu usec\n",
+		       notif->channel,
+		       notif->band ? "bg" : "a",
+		       notif->probe_status, notif->num_probe_not_sent,
+		       le32_to_cpu(notif->tsf_high),
+		       le32_to_cpu(notif->tsf_low),
+		       le32_to_cpu(notif->statistics[0]),
+		       le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf);
+#endif
+	return 0;
+}
+
+/* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
+static int iwl_rx_scan_complete_notif(struct iwl_priv *priv,
+				       struct iwl_rx_cmd_buffer *rxb,
+				       struct iwl_device_cmd *cmd)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl_scancomplete_notification *scan_notif = (void *)pkt->data;
+
+	IWL_DEBUG_SCAN(priv, "Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
+		       scan_notif->scanned_channels,
+		       scan_notif->tsf_low,
+		       scan_notif->tsf_high, scan_notif->status);
+
+	IWL_DEBUG_SCAN(priv, "Scan on %sGHz took %dms\n",
+		       (priv->scan_band == IEEE80211_BAND_2GHZ) ? "2.4" : "5.2",
+		       jiffies_to_msecs(jiffies - priv->scan_start));
+
+	/*
+	 * When aborting, we run the scan completed background work inline
+	 * and the background work must then do nothing. The SCAN_COMPLETE
+	 * bit helps implement that logic and thus needs to be set before
+	 * queueing the work. Also, since the scan abort waits for SCAN_HW
+	 * to clear, we need to set SCAN_COMPLETE before clearing SCAN_HW
+	 * to avoid a race there.
+	 */
+	set_bit(STATUS_SCAN_COMPLETE, &priv->status);
+	clear_bit(STATUS_SCAN_HW, &priv->status);
+	queue_work(priv->workqueue, &priv->scan_completed);
+
+	if (priv->iw_mode != NL80211_IFTYPE_ADHOC &&
+	    iwl_advanced_bt_coexist(priv) &&
+	    priv->bt_status != scan_notif->bt_status) {
+		if (scan_notif->bt_status) {
+			/* BT on */
+			if (!priv->bt_ch_announce)
+				priv->bt_traffic_load =
+					IWL_BT_COEX_TRAFFIC_LOAD_HIGH;
+			/*
+			 * otherwise, no traffic load information provided
+			 * no changes made
+			 */
+		} else {
+			/* BT off */
+			priv->bt_traffic_load =
+				IWL_BT_COEX_TRAFFIC_LOAD_NONE;
+		}
+		priv->bt_status = scan_notif->bt_status;
+		queue_work(priv->workqueue,
+			   &priv->bt_traffic_change_work);
+	}
+	return 0;
+}
+
+void iwl_setup_rx_scan_handlers(struct iwl_priv *priv)
+{
+	/* scan handlers */
+	priv->rx_handlers[REPLY_SCAN_CMD] = iwl_rx_reply_scan;
+	priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl_rx_scan_start_notif;
+	priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] =
+					iwl_rx_scan_results_notif;
+	priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] =
+					iwl_rx_scan_complete_notif;
+}
+
+static u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
+				     enum ieee80211_band band, u8 n_probes)
+{
+	if (band == IEEE80211_BAND_5GHZ)
+		return IWL_ACTIVE_DWELL_TIME_52 +
+			IWL_ACTIVE_DWELL_FACTOR_52GHZ * (n_probes + 1);
+	else
+		return IWL_ACTIVE_DWELL_TIME_24 +
+			IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1);
+}
+
+static u16 iwl_limit_dwell(struct iwl_priv *priv, u16 dwell_time)
+{
+	struct iwl_rxon_context *ctx;
+
+	/*
+	 * If we're associated, we clamp the dwell time 98%
+	 * of the smallest beacon interval (minus 2 * channel
+	 * tune time)
+	 */
+	for_each_context(priv, ctx) {
+		u16 value;
+
+		switch (ctx->staging.dev_type) {
+		case RXON_DEV_TYPE_P2P:
+			/* no timing constraints */
+			continue;
+		case RXON_DEV_TYPE_ESS:
+		default:
+			/* timing constraints if associated */
+			if (!iwl_is_associated_ctx(ctx))
+				continue;
+			break;
+		case RXON_DEV_TYPE_CP:
+		case RXON_DEV_TYPE_2STA:
+			/*
+			 * These seem to always have timers for TBTT
+			 * active in uCode even when not associated yet.
+			 */
+			break;
+		}
+
+		value = ctx->beacon_int;
+		if (!value)
+			value = IWL_PASSIVE_DWELL_BASE;
+		value = (value * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
+		dwell_time = min(value, dwell_time);
+	}
+
+	return dwell_time;
+}
+
+static u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
+				      enum ieee80211_band band)
+{
+	u16 passive = (band == IEEE80211_BAND_2GHZ) ?
+	    IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
+	    IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52;
+
+	return iwl_limit_dwell(priv, passive);
+}
+
+/* Return valid, unused, channel for a passive scan to reset the RF */
+static u8 iwl_get_single_channel_number(struct iwl_priv *priv,
+					enum ieee80211_band band)
+{
+	struct ieee80211_supported_band *sband = priv->hw->wiphy->bands[band];
+	struct iwl_rxon_context *ctx;
+	int i;
+
+	for (i = 0; i < sband->n_channels; i++) {
+		bool busy = false;
+
+		for_each_context(priv, ctx) {
+			busy = sband->channels[i].hw_value ==
+				le16_to_cpu(ctx->staging.channel);
+			if (busy)
+				break;
+		}
+
+		if (busy)
+			continue;
+
+		if (!(sband->channels[i].flags & IEEE80211_CHAN_DISABLED))
+			return sband->channels[i].hw_value;
+	}
+
+	return 0;
+}
+
+static int iwl_get_channel_for_reset_scan(struct iwl_priv *priv,
+					  struct ieee80211_vif *vif,
+					  enum ieee80211_band band,
+					  struct iwl_scan_channel *scan_ch)
+{
+	const struct ieee80211_supported_band *sband;
+	u16 channel;
+
+	sband = iwl_get_hw_mode(priv, band);
+	if (!sband) {
+		IWL_ERR(priv, "invalid band\n");
+		return 0;
+	}
+
+	channel = iwl_get_single_channel_number(priv, band);
+	if (channel) {
+		scan_ch->channel = cpu_to_le16(channel);
+		scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
+		scan_ch->active_dwell =
+			cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME);
+		scan_ch->passive_dwell =
+			cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME);
+		/* Set txpower levels to defaults */
+		scan_ch->dsp_atten = 110;
+		if (band == IEEE80211_BAND_5GHZ)
+			scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
+		else
+			scan_ch->tx_gain = ((1 << 5) | (5 << 3));
+		return 1;
+	}
+
+	IWL_ERR(priv, "no valid channel found\n");
+	return 0;
+}
+
+static int iwl_get_channels_for_scan(struct iwl_priv *priv,
+				     struct ieee80211_vif *vif,
+				     enum ieee80211_band band,
+				     u8 is_active, u8 n_probes,
+				     struct iwl_scan_channel *scan_ch)
+{
+	struct ieee80211_channel *chan;
+	const struct ieee80211_supported_band *sband;
+	u16 passive_dwell = 0;
+	u16 active_dwell = 0;
+	int added, i;
+	u16 channel;
+
+	sband = iwl_get_hw_mode(priv, band);
+	if (!sband)
+		return 0;
+
+	active_dwell = iwl_get_active_dwell_time(priv, band, n_probes);
+	passive_dwell = iwl_get_passive_dwell_time(priv, band);
+
+	if (passive_dwell <= active_dwell)
+		passive_dwell = active_dwell + 1;
+
+	for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) {
+		chan = priv->scan_request->channels[i];
+
+		if (chan->band != band)
+			continue;
+
+		channel = chan->hw_value;
+		scan_ch->channel = cpu_to_le16(channel);
+
+		if (!is_active || (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN))
+			scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
+		else
+			scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
+
+		if (n_probes)
+			scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes);
+
+		scan_ch->active_dwell = cpu_to_le16(active_dwell);
+		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+
+		/* Set txpower levels to defaults */
+		scan_ch->dsp_atten = 110;
+
+		/* NOTE: if we were doing 6Mb OFDM for scans we'd use
+		 * power level:
+		 * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
+		 */
+		if (band == IEEE80211_BAND_5GHZ)
+			scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
+		else
+			scan_ch->tx_gain = ((1 << 5) | (5 << 3));
+
+		IWL_DEBUG_SCAN(priv, "Scanning ch=%d prob=0x%X [%s %d]\n",
+			       channel, le32_to_cpu(scan_ch->type),
+			       (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
+				"ACTIVE" : "PASSIVE",
+			       (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
+			       active_dwell : passive_dwell);
+
+		scan_ch++;
+		added++;
+	}
+
+	IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added);
+	return added;
+}
+
+/**
+ * iwl_fill_probe_req - fill in all required fields and IE for probe request
+ */
+
+static u16 iwl_fill_probe_req(struct ieee80211_mgmt *frame, const u8 *ta,
+			      const u8 *ies, int ie_len, const u8 *ssid,
+			      u8 ssid_len, int left)
+{
+	int len = 0;
+	u8 *pos = NULL;
+
+	/* Make sure there is enough space for the probe request,
+	 * two mandatory IEs and the data */
+	left -= 24;
+	if (left < 0)
+		return 0;
+
+	frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
+	memcpy(frame->da, iwl_bcast_addr, ETH_ALEN);
+	memcpy(frame->sa, ta, ETH_ALEN);
+	memcpy(frame->bssid, iwl_bcast_addr, ETH_ALEN);
+	frame->seq_ctrl = 0;
+
+	len += 24;
+
+	/* ...next IE... */
+	pos = &frame->u.probe_req.variable[0];
+
+	/* fill in our SSID IE */
+	left -= ssid_len + 2;
+	if (left < 0)
+		return 0;
+	*pos++ = WLAN_EID_SSID;
+	*pos++ = ssid_len;
+	if (ssid && ssid_len) {
+		memcpy(pos, ssid, ssid_len);
+		pos += ssid_len;
+	}
+
+	len += ssid_len + 2;
+
+	if (WARN_ON(left < ie_len))
+		return len;
+
+	if (ies && ie_len) {
+		memcpy(pos, ies, ie_len);
+		len += ie_len;
+	}
+
+	return (u16)len;
+}
+
+static int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
+{
+	struct iwl_host_cmd cmd = {
+		.id = REPLY_SCAN_CMD,
+		.len = { sizeof(struct iwl_scan_cmd), },
+		.flags = CMD_SYNC,
+	};
+	struct iwl_scan_cmd *scan;
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	u32 rate_flags = 0;
+	u16 cmd_len = 0;
+	u16 rx_chain = 0;
+	enum ieee80211_band band;
+	u8 n_probes = 0;
+	u8 rx_ant = priv->eeprom_data->valid_rx_ant;
+	u8 rate;
+	bool is_active = false;
+	int  chan_mod;
+	u8 active_chains;
+	u8 scan_tx_antennas = priv->eeprom_data->valid_tx_ant;
+	int ret;
+	int scan_cmd_size = sizeof(struct iwl_scan_cmd) +
+			    MAX_SCAN_CHANNEL * sizeof(struct iwl_scan_channel) +
+			    priv->fw->ucode_capa.max_probe_length;
+	const u8 *ssid = NULL;
+	u8 ssid_len = 0;
+
+	if (WARN_ON_ONCE(priv->scan_request &&
+			 priv->scan_request->n_channels > MAX_SCAN_CHANNEL))
+		return -EINVAL;
+
+	lockdep_assert_held(&priv->mutex);
+
+	if (vif)
+		ctx = iwl_rxon_ctx_from_vif(vif);
+
+	if (!priv->scan_cmd) {
+		priv->scan_cmd = kmalloc(scan_cmd_size, GFP_KERNEL);
+		if (!priv->scan_cmd) {
+			IWL_DEBUG_SCAN(priv,
+				       "fail to allocate memory for scan\n");
+			return -ENOMEM;
+		}
+	}
+	scan = priv->scan_cmd;
+	memset(scan, 0, scan_cmd_size);
+
+	scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
+	scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
+
+	if (priv->scan_type != IWL_SCAN_ROC &&
+	    iwl_is_any_associated(priv)) {
+		u16 interval = 0;
+		u32 extra;
+		u32 suspend_time = 100;
+		u32 scan_suspend_time = 100;
+
+		IWL_DEBUG_INFO(priv, "Scanning while associated...\n");
+		switch (priv->scan_type) {
+		case IWL_SCAN_ROC:
+			WARN_ON(1);
+			break;
+		case IWL_SCAN_RADIO_RESET:
+			interval = 0;
+			break;
+		case IWL_SCAN_NORMAL:
+			interval = vif->bss_conf.beacon_int;
+			break;
+		}
+
+		scan->suspend_time = 0;
+		scan->max_out_time = cpu_to_le32(200 * 1024);
+		if (!interval)
+			interval = suspend_time;
+
+		extra = (suspend_time / interval) << 22;
+		scan_suspend_time = (extra |
+		    ((suspend_time % interval) * 1024));
+		scan->suspend_time = cpu_to_le32(scan_suspend_time);
+		IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n",
+			       scan_suspend_time, interval);
+	} else if (priv->scan_type == IWL_SCAN_ROC) {
+		scan->suspend_time = 0;
+		scan->max_out_time = 0;
+		scan->quiet_time = 0;
+		scan->quiet_plcp_th = 0;
+	}
+
+	switch (priv->scan_type) {
+	case IWL_SCAN_RADIO_RESET:
+		IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
+		/*
+		 * Override quiet time as firmware checks that active
+		 * dwell is >= quiet; since we use passive scan it'll
+		 * not actually be used.
+		 */
+		scan->quiet_time = cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME);
+		break;
+	case IWL_SCAN_NORMAL:
+		if (priv->scan_request->n_ssids) {
+			int i, p = 0;
+			IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
+			/*
+			 * The highest priority SSID is inserted to the
+			 * probe request template.
+			 */
+			ssid_len = priv->scan_request->ssids[0].ssid_len;
+			ssid = priv->scan_request->ssids[0].ssid;
+
+			/*
+			 * Invert the order of ssids, the firmware will invert
+			 * it back.
+			 */
+			for (i = priv->scan_request->n_ssids - 1; i >= 1; i--) {
+				scan->direct_scan[p].id = WLAN_EID_SSID;
+				scan->direct_scan[p].len =
+					priv->scan_request->ssids[i].ssid_len;
+				memcpy(scan->direct_scan[p].ssid,
+				       priv->scan_request->ssids[i].ssid,
+				       priv->scan_request->ssids[i].ssid_len);
+				n_probes++;
+				p++;
+			}
+			is_active = true;
+		} else
+			IWL_DEBUG_SCAN(priv, "Start passive scan.\n");
+		break;
+	case IWL_SCAN_ROC:
+		IWL_DEBUG_SCAN(priv, "Start ROC scan.\n");
+		break;
+	}
+
+	scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
+	scan->tx_cmd.sta_id = ctx->bcast_sta_id;
+	scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+
+	switch (priv->scan_band) {
+	case IEEE80211_BAND_2GHZ:
+		scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
+		chan_mod = le32_to_cpu(
+			priv->contexts[IWL_RXON_CTX_BSS].active.flags &
+						RXON_FLG_CHANNEL_MODE_MSK)
+				       >> RXON_FLG_CHANNEL_MODE_POS;
+		if ((priv->scan_request && priv->scan_request->no_cck) ||
+		    chan_mod == CHANNEL_MODE_PURE_40) {
+			rate = IWL_RATE_6M_PLCP;
+		} else {
+			rate = IWL_RATE_1M_PLCP;
+			rate_flags = RATE_MCS_CCK_MSK;
+		}
+		/*
+		 * Internal scans are passive, so we can indiscriminately set
+		 * the BT ignore flag on 2.4 GHz since it applies to TX only.
+		 */
+		if (priv->cfg->bt_params &&
+		    priv->cfg->bt_params->advanced_bt_coexist)
+			scan->tx_cmd.tx_flags |= TX_CMD_FLG_IGNORE_BT;
+		break;
+	case IEEE80211_BAND_5GHZ:
+		rate = IWL_RATE_6M_PLCP;
+		break;
+	default:
+		IWL_WARN(priv, "Invalid scan band\n");
+		return -EIO;
+	}
+
+	/*
+	 * If active scanning is requested but a certain channel is
+	 * marked passive, we can do active scanning if we detect
+	 * transmissions.
+	 *
+	 * There is an issue with some firmware versions that triggers
+	 * a sysassert on a "good CRC threshold" of zero (== disabled),
+	 * on a radar channel even though this means that we should NOT
+	 * send probes.
+	 *
+	 * The "good CRC threshold" is the number of frames that we
+	 * need to receive during our dwell time on a channel before
+	 * sending out probes -- setting this to a huge value will
+	 * mean we never reach it, but at the same time work around
+	 * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER
+	 * here instead of IWL_GOOD_CRC_TH_DISABLED.
+	 *
+	 * This was fixed in later versions along with some other
+	 * scan changes, and the threshold behaves as a flag in those
+	 * versions.
+	 */
+	if (priv->new_scan_threshold_behaviour)
+		scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
+						IWL_GOOD_CRC_TH_DISABLED;
+	else
+		scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
+						IWL_GOOD_CRC_TH_NEVER;
+
+	band = priv->scan_band;
+
+	if (band == IEEE80211_BAND_2GHZ &&
+	    priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist) {
+		/* transmit 2.4 GHz probes only on first antenna */
+		scan_tx_antennas = first_antenna(scan_tx_antennas);
+	}
+
+	priv->scan_tx_ant[band] = iwl_toggle_tx_ant(priv,
+						    priv->scan_tx_ant[band],
+						    scan_tx_antennas);
+	rate_flags |= iwl_ant_idx_to_flags(priv->scan_tx_ant[band]);
+	scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(rate, rate_flags);
+
+	/*
+	 * In power save mode while associated use one chain,
+	 * otherwise use all chains
+	 */
+	if (test_bit(STATUS_POWER_PMI, &priv->status) &&
+	    !(priv->hw->conf.flags & IEEE80211_CONF_IDLE)) {
+		/* rx_ant has been set to all valid chains previously */
+		active_chains = rx_ant &
+				((u8)(priv->chain_noise_data.active_chains));
+		if (!active_chains)
+			active_chains = rx_ant;
+
+		IWL_DEBUG_SCAN(priv, "chain_noise_data.active_chains: %u\n",
+				priv->chain_noise_data.active_chains);
+
+		rx_ant = first_antenna(active_chains);
+	}
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist &&
+	    priv->bt_full_concurrent) {
+		/* operated as 1x1 in full concurrency mode */
+		rx_ant = first_antenna(rx_ant);
+	}
+
+	/* MIMO is not used here, but value is required */
+	rx_chain |=
+		priv->eeprom_data->valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
+	rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
+	rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
+	rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
+	scan->rx_chain = cpu_to_le16(rx_chain);
+	switch (priv->scan_type) {
+	case IWL_SCAN_NORMAL:
+		cmd_len = iwl_fill_probe_req(
+					(struct ieee80211_mgmt *)scan->data,
+					vif->addr,
+					priv->scan_request->ie,
+					priv->scan_request->ie_len,
+					ssid, ssid_len,
+					scan_cmd_size - sizeof(*scan));
+		break;
+	case IWL_SCAN_RADIO_RESET:
+	case IWL_SCAN_ROC:
+		/* use bcast addr, will not be transmitted but must be valid */
+		cmd_len = iwl_fill_probe_req(
+					(struct ieee80211_mgmt *)scan->data,
+					iwl_bcast_addr, NULL, 0,
+					NULL, 0,
+					scan_cmd_size - sizeof(*scan));
+		break;
+	default:
+		BUG();
+	}
+	scan->tx_cmd.len = cpu_to_le16(cmd_len);
+
+	scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
+			       RXON_FILTER_BCON_AWARE_MSK);
+
+	switch (priv->scan_type) {
+	case IWL_SCAN_RADIO_RESET:
+		scan->channel_count =
+			iwl_get_channel_for_reset_scan(priv, vif, band,
+				(void *)&scan->data[cmd_len]);
+		break;
+	case IWL_SCAN_NORMAL:
+		scan->channel_count =
+			iwl_get_channels_for_scan(priv, vif, band,
+				is_active, n_probes,
+				(void *)&scan->data[cmd_len]);
+		break;
+	case IWL_SCAN_ROC: {
+		struct iwl_scan_channel *scan_ch;
+		int n_chan, i;
+		u16 dwell;
+
+		dwell = iwl_limit_dwell(priv, priv->hw_roc_duration);
+		n_chan = DIV_ROUND_UP(priv->hw_roc_duration, dwell);
+
+		scan->channel_count = n_chan;
+
+		scan_ch = (void *)&scan->data[cmd_len];
+
+		for (i = 0; i < n_chan; i++) {
+			scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
+			scan_ch->channel =
+				cpu_to_le16(priv->hw_roc_channel->hw_value);
+
+			if (i == n_chan - 1)
+				dwell = priv->hw_roc_duration - i * dwell;
+
+			scan_ch->active_dwell =
+			scan_ch->passive_dwell = cpu_to_le16(dwell);
+
+			/* Set txpower levels to defaults */
+			scan_ch->dsp_atten = 110;
+
+			/* NOTE: if we were doing 6Mb OFDM for scans we'd use
+			 * power level:
+			 * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
+			 */
+			if (priv->hw_roc_channel->band == IEEE80211_BAND_5GHZ)
+				scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
+			else
+				scan_ch->tx_gain = ((1 << 5) | (5 << 3));
+
+			scan_ch++;
+		}
+		}
+
+		break;
+	}
+
+	if (scan->channel_count == 0) {
+		IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
+		return -EIO;
+	}
+
+	cmd.len[0] += le16_to_cpu(scan->tx_cmd.len) +
+	    scan->channel_count * sizeof(struct iwl_scan_channel);
+	cmd.data[0] = scan;
+	cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY;
+	scan->len = cpu_to_le16(cmd.len[0]);
+
+	/* set scan bit here for PAN params */
+	set_bit(STATUS_SCAN_HW, &priv->status);
+
+	ret = iwlagn_set_pan_params(priv);
+	if (ret) {
+		clear_bit(STATUS_SCAN_HW, &priv->status);
+		return ret;
+	}
+
+	ret = iwl_dvm_send_cmd(priv, &cmd);
+	if (ret) {
+		clear_bit(STATUS_SCAN_HW, &priv->status);
+		iwlagn_set_pan_params(priv);
+	}
+
+	return ret;
+}
+
+void iwl_init_scan_params(struct iwl_priv *priv)
+{
+	u8 ant_idx = fls(priv->eeprom_data->valid_tx_ant) - 1;
+	if (!priv->scan_tx_ant[IEEE80211_BAND_5GHZ])
+		priv->scan_tx_ant[IEEE80211_BAND_5GHZ] = ant_idx;
+	if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ])
+		priv->scan_tx_ant[IEEE80211_BAND_2GHZ] = ant_idx;
+}
+
+int __must_check iwl_scan_initiate(struct iwl_priv *priv,
+				   struct ieee80211_vif *vif,
+				   enum iwl_scan_type scan_type,
+				   enum ieee80211_band band)
+{
+	int ret;
+
+	lockdep_assert_held(&priv->mutex);
+
+	cancel_delayed_work(&priv->scan_check);
+
+	if (!iwl_is_ready_rf(priv)) {
+		IWL_WARN(priv, "Request scan called when driver not ready.\n");
+		return -EIO;
+	}
+
+	if (test_bit(STATUS_SCAN_HW, &priv->status)) {
+		IWL_DEBUG_SCAN(priv,
+			"Multiple concurrent scan requests in parallel.\n");
+		return -EBUSY;
+	}
+
+	if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+		IWL_DEBUG_SCAN(priv, "Scan request while abort pending.\n");
+		return -EBUSY;
+	}
+
+	IWL_DEBUG_SCAN(priv, "Starting %sscan...\n",
+			scan_type == IWL_SCAN_NORMAL ? "" :
+			scan_type == IWL_SCAN_ROC ? "remain-on-channel " :
+			"internal short ");
+
+	set_bit(STATUS_SCANNING, &priv->status);
+	priv->scan_type = scan_type;
+	priv->scan_start = jiffies;
+	priv->scan_band = band;
+
+	ret = iwlagn_request_scan(priv, vif);
+	if (ret) {
+		clear_bit(STATUS_SCANNING, &priv->status);
+		priv->scan_type = IWL_SCAN_NORMAL;
+		return ret;
+	}
+
+	queue_delayed_work(priv->workqueue, &priv->scan_check,
+			   IWL_SCAN_CHECK_WATCHDOG);
+
+	return 0;
+}
+
+
+/*
+ * internal short scan, this function should only been called while associated.
+ * It will reset and tune the radio to prevent possible RF related problem
+ */
+void iwl_internal_short_hw_scan(struct iwl_priv *priv)
+{
+	queue_work(priv->workqueue, &priv->start_internal_scan);
+}
+
+static void iwl_bg_start_internal_scan(struct work_struct *work)
+{
+	struct iwl_priv *priv =
+		container_of(work, struct iwl_priv, start_internal_scan);
+
+	IWL_DEBUG_SCAN(priv, "Start internal scan\n");
+
+	mutex_lock(&priv->mutex);
+
+	if (priv->scan_type == IWL_SCAN_RADIO_RESET) {
+		IWL_DEBUG_SCAN(priv, "Internal scan already in progress\n");
+		goto unlock;
+	}
+
+	if (test_bit(STATUS_SCANNING, &priv->status)) {
+		IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
+		goto unlock;
+	}
+
+	if (iwl_scan_initiate(priv, NULL, IWL_SCAN_RADIO_RESET, priv->band))
+		IWL_DEBUG_SCAN(priv, "failed to start internal short scan\n");
+ unlock:
+	mutex_unlock(&priv->mutex);
+}
+
+static void iwl_bg_scan_check(struct work_struct *data)
+{
+	struct iwl_priv *priv =
+	    container_of(data, struct iwl_priv, scan_check.work);
+
+	IWL_DEBUG_SCAN(priv, "Scan check work\n");
+
+	/* Since we are here firmware does not finish scan and
+	 * most likely is in bad shape, so we don't bother to
+	 * send abort command, just force scan complete to mac80211 */
+	mutex_lock(&priv->mutex);
+	iwl_force_scan_end(priv);
+	mutex_unlock(&priv->mutex);
+}
+
+static void iwl_bg_abort_scan(struct work_struct *work)
+{
+	struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan);
+
+	IWL_DEBUG_SCAN(priv, "Abort scan work\n");
+
+	/* We keep scan_check work queued in case when firmware will not
+	 * report back scan completed notification */
+	mutex_lock(&priv->mutex);
+	iwl_scan_cancel_timeout(priv, 200);
+	mutex_unlock(&priv->mutex);
+}
+
+static void iwl_bg_scan_completed(struct work_struct *work)
+{
+	struct iwl_priv *priv =
+		container_of(work, struct iwl_priv, scan_completed);
+
+	mutex_lock(&priv->mutex);
+	iwl_process_scan_complete(priv);
+	mutex_unlock(&priv->mutex);
+}
+
+void iwl_setup_scan_deferred_work(struct iwl_priv *priv)
+{
+	INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed);
+	INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan);
+	INIT_WORK(&priv->start_internal_scan, iwl_bg_start_internal_scan);
+	INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check);
+}
+
+void iwl_cancel_scan_deferred_work(struct iwl_priv *priv)
+{
+	cancel_work_sync(&priv->start_internal_scan);
+	cancel_work_sync(&priv->abort_scan);
+	cancel_work_sync(&priv->scan_completed);
+
+	if (cancel_delayed_work_sync(&priv->scan_check)) {
+		mutex_lock(&priv->mutex);
+		iwl_force_scan_end(priv);
+		mutex_unlock(&priv->mutex);
+	}
+}
+
+void iwl_scan_roc_expired(struct iwl_priv *priv)
+{
+	/*
+	 * The status bit should be set here, to prevent a race
+	 * where the atomic_read returns 1, but before the execution continues
+	 * iwl_scan_offchannel_skb_status() checks if the status bit is set
+	 */
+	set_bit(STATUS_SCAN_ROC_EXPIRED, &priv->status);
+
+	if (atomic_read(&priv->num_aux_in_flight) == 0) {
+		ieee80211_remain_on_channel_expired(priv->hw);
+		priv->hw_roc_channel = NULL;
+		schedule_delayed_work(&priv->hw_roc_disable_work,
+				      10 * HZ);
+
+		clear_bit(STATUS_SCAN_ROC_EXPIRED, &priv->status);
+	} else {
+		IWL_DEBUG_SCAN(priv, "ROC done with %d frames in aux\n",
+			       atomic_read(&priv->num_aux_in_flight));
+	}
+}
+
+void iwl_scan_offchannel_skb(struct iwl_priv *priv)
+{
+	WARN_ON(!priv->hw_roc_start_notified);
+	atomic_inc(&priv->num_aux_in_flight);
+}
+
+void iwl_scan_offchannel_skb_status(struct iwl_priv *priv)
+{
+	if (atomic_dec_return(&priv->num_aux_in_flight) == 0 &&
+	    test_bit(STATUS_SCAN_ROC_EXPIRED, &priv->status)) {
+		IWL_DEBUG_SCAN(priv, "0 aux frames. Calling ROC expired\n");
+		iwl_scan_roc_expired(priv);
+	}
+}
diff --git a/drivers/net/wireless/iwlwifi/dvm/sta.c b/drivers/net/wireless/iwlwifi/dvm/sta.c
new file mode 100644
index 00000000000..b29b798f755
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/sta.c
@@ -0,0 +1,1485 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are derived from the ipw3945 project, as well
+ * as portions of the ieee80211 subsystem header files.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+#include <linux/etherdevice.h>
+#include <net/mac80211.h>
+#include "iwl-trans.h"
+#include "dev.h"
+#include "agn.h"
+
+const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
+
+static int iwl_sta_ucode_activate(struct iwl_priv *priv, u8 sta_id)
+{
+	lockdep_assert_held(&priv->sta_lock);
+
+	if (sta_id >= IWLAGN_STATION_COUNT) {
+		IWL_ERR(priv, "invalid sta_id %u", sta_id);
+		return -EINVAL;
+	}
+	if (!(priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE))
+		IWL_ERR(priv, "ACTIVATE a non DRIVER active station id %u "
+			"addr %pM\n",
+			sta_id, priv->stations[sta_id].sta.sta.addr);
+
+	if (priv->stations[sta_id].used & IWL_STA_UCODE_ACTIVE) {
+		IWL_DEBUG_ASSOC(priv,
+				"STA id %u addr %pM already present in uCode "
+				"(according to driver)\n",
+				sta_id, priv->stations[sta_id].sta.sta.addr);
+	} else {
+		priv->stations[sta_id].used |= IWL_STA_UCODE_ACTIVE;
+		IWL_DEBUG_ASSOC(priv, "Added STA id %u addr %pM to uCode\n",
+				sta_id, priv->stations[sta_id].sta.sta.addr);
+	}
+	return 0;
+}
+
+static int iwl_process_add_sta_resp(struct iwl_priv *priv,
+				    struct iwl_addsta_cmd *addsta,
+				    struct iwl_rx_packet *pkt)
+{
+	struct iwl_add_sta_resp *add_sta_resp = (void *)pkt->data;
+	u8 sta_id = addsta->sta.sta_id;
+	int ret = -EIO;
+
+	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
+		IWL_ERR(priv, "Bad return from REPLY_ADD_STA (0x%08X)\n",
+			pkt->hdr.flags);
+		return ret;
+	}
+
+	IWL_DEBUG_INFO(priv, "Processing response for adding station %u\n",
+		       sta_id);
+
+	spin_lock(&priv->sta_lock);
+
+	switch (add_sta_resp->status) {
+	case ADD_STA_SUCCESS_MSK:
+		IWL_DEBUG_INFO(priv, "REPLY_ADD_STA PASSED\n");
+		ret = iwl_sta_ucode_activate(priv, sta_id);
+		break;
+	case ADD_STA_NO_ROOM_IN_TABLE:
+		IWL_ERR(priv, "Adding station %d failed, no room in table.\n",
+			sta_id);
+		break;
+	case ADD_STA_NO_BLOCK_ACK_RESOURCE:
+		IWL_ERR(priv, "Adding station %d failed, no block ack "
+			"resource.\n", sta_id);
+		break;
+	case ADD_STA_MODIFY_NON_EXIST_STA:
+		IWL_ERR(priv, "Attempting to modify non-existing station %d\n",
+			sta_id);
+		break;
+	default:
+		IWL_DEBUG_ASSOC(priv, "Received REPLY_ADD_STA:(0x%08X)\n",
+				add_sta_resp->status);
+		break;
+	}
+
+	IWL_DEBUG_INFO(priv, "%s station id %u addr %pM\n",
+		       priv->stations[sta_id].sta.mode ==
+		       STA_CONTROL_MODIFY_MSK ?  "Modified" : "Added",
+		       sta_id, priv->stations[sta_id].sta.sta.addr);
+
+	/*
+	 * XXX: The MAC address in the command buffer is often changed from
+	 * the original sent to the device. That is, the MAC address
+	 * written to the command buffer often is not the same MAC address
+	 * read from the command buffer when the command returns. This
+	 * issue has not yet been resolved and this debugging is left to
+	 * observe the problem.
+	 */
+	IWL_DEBUG_INFO(priv, "%s station according to cmd buffer %pM\n",
+		       priv->stations[sta_id].sta.mode ==
+		       STA_CONTROL_MODIFY_MSK ? "Modified" : "Added",
+		       addsta->sta.addr);
+	spin_unlock(&priv->sta_lock);
+
+	return ret;
+}
+
+int iwl_add_sta_callback(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb,
+			       struct iwl_device_cmd *cmd)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl_addsta_cmd *addsta =
+		(struct iwl_addsta_cmd *) cmd->payload;
+
+	return iwl_process_add_sta_resp(priv, addsta, pkt);
+}
+
+int iwl_send_add_sta(struct iwl_priv *priv,
+		     struct iwl_addsta_cmd *sta, u8 flags)
+{
+	int ret = 0;
+	struct iwl_host_cmd cmd = {
+		.id = REPLY_ADD_STA,
+		.flags = flags,
+		.data = { sta, },
+		.len = { sizeof(*sta), },
+	};
+	u8 sta_id __maybe_unused = sta->sta.sta_id;
+
+	IWL_DEBUG_INFO(priv, "Adding sta %u (%pM) %ssynchronously\n",
+		       sta_id, sta->sta.addr, flags & CMD_ASYNC ?  "a" : "");
+
+	if (!(flags & CMD_ASYNC)) {
+		cmd.flags |= CMD_WANT_SKB;
+		might_sleep();
+	}
+
+	ret = iwl_dvm_send_cmd(priv, &cmd);
+
+	if (ret || (flags & CMD_ASYNC))
+		return ret;
+	/*else the command was successfully sent in SYNC mode, need to free
+	 * the reply page */
+
+	iwl_free_resp(&cmd);
+
+	if (cmd.handler_status)
+		IWL_ERR(priv, "%s - error in the CMD response %d", __func__,
+			cmd.handler_status);
+
+	return cmd.handler_status;
+}
+
+bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv,
+			    struct iwl_rxon_context *ctx,
+			    struct ieee80211_sta_ht_cap *ht_cap)
+{
+	if (!ctx->ht.enabled || !ctx->ht.is_40mhz)
+		return false;
+
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+	if (priv->disable_ht40)
+		return false;
+#endif
+
+	/*
+	 * Remainder of this function checks ht_cap, but if it's
+	 * NULL then we can do HT40 (special case for RXON)
+	 */
+	if (!ht_cap)
+		return true;
+
+	if (!ht_cap->ht_supported)
+		return false;
+
+	if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40))
+		return false;
+
+	return true;
+}
+
+static void iwl_sta_calc_ht_flags(struct iwl_priv *priv,
+				  struct ieee80211_sta *sta,
+				  struct iwl_rxon_context *ctx,
+				  __le32 *flags, __le32 *mask)
+{
+	struct ieee80211_sta_ht_cap *sta_ht_inf = &sta->ht_cap;
+	u8 mimo_ps_mode;
+
+	*mask = STA_FLG_RTS_MIMO_PROT_MSK |
+		STA_FLG_MIMO_DIS_MSK |
+		STA_FLG_HT40_EN_MSK |
+		STA_FLG_MAX_AGG_SIZE_MSK |
+		STA_FLG_AGG_MPDU_DENSITY_MSK;
+	*flags = 0;
+
+	if (!sta || !sta_ht_inf->ht_supported)
+		return;
+
+	mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_SM_PS) >> 2;
+
+	IWL_DEBUG_INFO(priv, "STA %pM SM PS mode: %s\n",
+			sta->addr,
+			(mimo_ps_mode == WLAN_HT_CAP_SM_PS_STATIC) ?
+			"static" :
+			(mimo_ps_mode == WLAN_HT_CAP_SM_PS_DYNAMIC) ?
+			"dynamic" : "disabled");
+
+	switch (mimo_ps_mode) {
+	case WLAN_HT_CAP_SM_PS_STATIC:
+		*flags |= STA_FLG_MIMO_DIS_MSK;
+		break;
+	case WLAN_HT_CAP_SM_PS_DYNAMIC:
+		*flags |= STA_FLG_RTS_MIMO_PROT_MSK;
+		break;
+	case WLAN_HT_CAP_SM_PS_DISABLED:
+		break;
+	default:
+		IWL_WARN(priv, "Invalid MIMO PS mode %d\n", mimo_ps_mode);
+		break;
+	}
+
+	*flags |= cpu_to_le32(
+		(u32)sta_ht_inf->ampdu_factor << STA_FLG_MAX_AGG_SIZE_POS);
+
+	*flags |= cpu_to_le32(
+		(u32)sta_ht_inf->ampdu_density << STA_FLG_AGG_MPDU_DENSITY_POS);
+
+	if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap))
+		*flags |= STA_FLG_HT40_EN_MSK;
+}
+
+int iwl_sta_update_ht(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
+		      struct ieee80211_sta *sta)
+{
+	u8 sta_id = iwl_sta_id(sta);
+	__le32 flags, mask;
+	struct iwl_addsta_cmd cmd;
+
+	if (WARN_ON_ONCE(sta_id == IWL_INVALID_STATION))
+		return -EINVAL;
+
+	iwl_sta_calc_ht_flags(priv, sta, ctx, &flags, &mask);
+
+	spin_lock_bh(&priv->sta_lock);
+	priv->stations[sta_id].sta.station_flags &= ~mask;
+	priv->stations[sta_id].sta.station_flags |= flags;
+	spin_unlock_bh(&priv->sta_lock);
+
+	memset(&cmd, 0, sizeof(cmd));
+	cmd.mode = STA_CONTROL_MODIFY_MSK;
+	cmd.station_flags_msk = mask;
+	cmd.station_flags = flags;
+	cmd.sta.sta_id = sta_id;
+
+	return iwl_send_add_sta(priv, &cmd, CMD_SYNC);
+}
+
+static void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index,
+				   struct ieee80211_sta *sta,
+				   struct iwl_rxon_context *ctx)
+{
+	__le32 flags, mask;
+
+	iwl_sta_calc_ht_flags(priv, sta, ctx, &flags, &mask);
+
+	lockdep_assert_held(&priv->sta_lock);
+	priv->stations[index].sta.station_flags &= ~mask;
+	priv->stations[index].sta.station_flags |= flags;
+}
+
+/**
+ * iwl_prep_station - Prepare station information for addition
+ *
+ * should be called with sta_lock held
+ */
+u8 iwl_prep_station(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
+		    const u8 *addr, bool is_ap, struct ieee80211_sta *sta)
+{
+	struct iwl_station_entry *station;
+	int i;
+	u8 sta_id = IWL_INVALID_STATION;
+
+	if (is_ap)
+		sta_id = ctx->ap_sta_id;
+	else if (is_broadcast_ether_addr(addr))
+		sta_id = ctx->bcast_sta_id;
+	else
+		for (i = IWL_STA_ID; i < IWLAGN_STATION_COUNT; i++) {
+			if (ether_addr_equal(priv->stations[i].sta.sta.addr,
+					     addr)) {
+				sta_id = i;
+				break;
+			}
+
+			if (!priv->stations[i].used &&
+			    sta_id == IWL_INVALID_STATION)
+				sta_id = i;
+		}
+
+	/*
+	 * These two conditions have the same outcome, but keep them
+	 * separate
+	 */
+	if (unlikely(sta_id == IWL_INVALID_STATION))
+		return sta_id;
+
+	/*
+	 * uCode is not able to deal with multiple requests to add a
+	 * station. Keep track if one is in progress so that we do not send
+	 * another.
+	 */
+	if (priv->stations[sta_id].used & IWL_STA_UCODE_INPROGRESS) {
+		IWL_DEBUG_INFO(priv, "STA %d already in process of being "
+			       "added.\n", sta_id);
+		return sta_id;
+	}
+
+	if ((priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE) &&
+	    (priv->stations[sta_id].used & IWL_STA_UCODE_ACTIVE) &&
+	    ether_addr_equal(priv->stations[sta_id].sta.sta.addr, addr)) {
+		IWL_DEBUG_ASSOC(priv, "STA %d (%pM) already added, not "
+				"adding again.\n", sta_id, addr);
+		return sta_id;
+	}
+
+	station = &priv->stations[sta_id];
+	station->used = IWL_STA_DRIVER_ACTIVE;
+	IWL_DEBUG_ASSOC(priv, "Add STA to driver ID %d: %pM\n",
+			sta_id, addr);
+	priv->num_stations++;
+
+	/* Set up the REPLY_ADD_STA command to send to device */
+	memset(&station->sta, 0, sizeof(struct iwl_addsta_cmd));
+	memcpy(station->sta.sta.addr, addr, ETH_ALEN);
+	station->sta.mode = 0;
+	station->sta.sta.sta_id = sta_id;
+	station->sta.station_flags = ctx->station_flags;
+	station->ctxid = ctx->ctxid;
+
+	if (sta) {
+		struct iwl_station_priv *sta_priv;
+
+		sta_priv = (void *)sta->drv_priv;
+		sta_priv->ctx = ctx;
+	}
+
+	/*
+	 * OK to call unconditionally, since local stations (IBSS BSSID
+	 * STA and broadcast STA) pass in a NULL sta, and mac80211
+	 * doesn't allow HT IBSS.
+	 */
+	iwl_set_ht_add_station(priv, sta_id, sta, ctx);
+
+	return sta_id;
+
+}
+
+#define STA_WAIT_TIMEOUT (HZ/2)
+
+/**
+ * iwl_add_station_common -
+ */
+int iwl_add_station_common(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
+			   const u8 *addr, bool is_ap,
+			   struct ieee80211_sta *sta, u8 *sta_id_r)
+{
+	int ret = 0;
+	u8 sta_id;
+	struct iwl_addsta_cmd sta_cmd;
+
+	*sta_id_r = 0;
+	spin_lock_bh(&priv->sta_lock);
+	sta_id = iwl_prep_station(priv, ctx, addr, is_ap, sta);
+	if (sta_id == IWL_INVALID_STATION) {
+		IWL_ERR(priv, "Unable to prepare station %pM for addition\n",
+			addr);
+		spin_unlock_bh(&priv->sta_lock);
+		return -EINVAL;
+	}
+
+	/*
+	 * uCode is not able to deal with multiple requests to add a
+	 * station. Keep track if one is in progress so that we do not send
+	 * another.
+	 */
+	if (priv->stations[sta_id].used & IWL_STA_UCODE_INPROGRESS) {
+		IWL_DEBUG_INFO(priv, "STA %d already in process of being "
+			       "added.\n", sta_id);
+		spin_unlock_bh(&priv->sta_lock);
+		return -EEXIST;
+	}
+
+	if ((priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE) &&
+	    (priv->stations[sta_id].used & IWL_STA_UCODE_ACTIVE)) {
+		IWL_DEBUG_ASSOC(priv, "STA %d (%pM) already added, not "
+				"adding again.\n", sta_id, addr);
+		spin_unlock_bh(&priv->sta_lock);
+		return -EEXIST;
+	}
+
+	priv->stations[sta_id].used |= IWL_STA_UCODE_INPROGRESS;
+	memcpy(&sta_cmd, &priv->stations[sta_id].sta,
+	       sizeof(struct iwl_addsta_cmd));
+	spin_unlock_bh(&priv->sta_lock);
+
+	/* Add station to device's station table */
+	ret = iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC);
+	if (ret) {
+		spin_lock_bh(&priv->sta_lock);
+		IWL_ERR(priv, "Adding station %pM failed.\n",
+			priv->stations[sta_id].sta.sta.addr);
+		priv->stations[sta_id].used &= ~IWL_STA_DRIVER_ACTIVE;
+		priv->stations[sta_id].used &= ~IWL_STA_UCODE_INPROGRESS;
+		spin_unlock_bh(&priv->sta_lock);
+	}
+	*sta_id_r = sta_id;
+	return ret;
+}
+
+/**
+ * iwl_sta_ucode_deactivate - deactivate ucode status for a station
+ */
+static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, u8 sta_id)
+{
+	lockdep_assert_held(&priv->sta_lock);
+
+	/* Ucode must be active and driver must be non active */
+	if ((priv->stations[sta_id].used &
+	     (IWL_STA_UCODE_ACTIVE | IWL_STA_DRIVER_ACTIVE)) !=
+	      IWL_STA_UCODE_ACTIVE)
+		IWL_ERR(priv, "removed non active STA %u\n", sta_id);
+
+	priv->stations[sta_id].used &= ~IWL_STA_UCODE_ACTIVE;
+
+	memset(&priv->stations[sta_id], 0, sizeof(struct iwl_station_entry));
+	IWL_DEBUG_ASSOC(priv, "Removed STA %u\n", sta_id);
+}
+
+static int iwl_send_remove_station(struct iwl_priv *priv,
+				   const u8 *addr, int sta_id,
+				   bool temporary)
+{
+	struct iwl_rx_packet *pkt;
+	int ret;
+	struct iwl_rem_sta_cmd rm_sta_cmd;
+
+	struct iwl_host_cmd cmd = {
+		.id = REPLY_REMOVE_STA,
+		.len = { sizeof(struct iwl_rem_sta_cmd), },
+		.flags = CMD_SYNC,
+		.data = { &rm_sta_cmd, },
+	};
+
+	memset(&rm_sta_cmd, 0, sizeof(rm_sta_cmd));
+	rm_sta_cmd.num_sta = 1;
+	memcpy(&rm_sta_cmd.addr, addr, ETH_ALEN);
+
+	cmd.flags |= CMD_WANT_SKB;
+
+	ret = iwl_dvm_send_cmd(priv, &cmd);
+
+	if (ret)
+		return ret;
+
+	pkt = cmd.resp_pkt;
+	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
+		IWL_ERR(priv, "Bad return from REPLY_REMOVE_STA (0x%08X)\n",
+			  pkt->hdr.flags);
+		ret = -EIO;
+	}
+
+	if (!ret) {
+		struct iwl_rem_sta_resp *rem_sta_resp = (void *)pkt->data;
+		switch (rem_sta_resp->status) {
+		case REM_STA_SUCCESS_MSK:
+			if (!temporary) {
+				spin_lock_bh(&priv->sta_lock);
+				iwl_sta_ucode_deactivate(priv, sta_id);
+				spin_unlock_bh(&priv->sta_lock);
+			}
+			IWL_DEBUG_ASSOC(priv, "REPLY_REMOVE_STA PASSED\n");
+			break;
+		default:
+			ret = -EIO;
+			IWL_ERR(priv, "REPLY_REMOVE_STA failed\n");
+			break;
+		}
+	}
+	iwl_free_resp(&cmd);
+
+	return ret;
+}
+
+/**
+ * iwl_remove_station - Remove driver's knowledge of station.
+ */
+int iwl_remove_station(struct iwl_priv *priv, const u8 sta_id,
+		       const u8 *addr)
+{
+	u8 tid;
+
+	if (!iwl_is_ready(priv)) {
+		IWL_DEBUG_INFO(priv,
+			"Unable to remove station %pM, device not ready.\n",
+			addr);
+		/*
+		 * It is typical for stations to be removed when we are
+		 * going down. Return success since device will be down
+		 * soon anyway
+		 */
+		return 0;
+	}
+
+	IWL_DEBUG_ASSOC(priv, "Removing STA from driver:%d  %pM\n",
+			sta_id, addr);
+
+	if (WARN_ON(sta_id == IWL_INVALID_STATION))
+		return -EINVAL;
+
+	spin_lock_bh(&priv->sta_lock);
+
+	if (!(priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE)) {
+		IWL_DEBUG_INFO(priv, "Removing %pM but non DRIVER active\n",
+				addr);
+		goto out_err;
+	}
+
+	if (!(priv->stations[sta_id].used & IWL_STA_UCODE_ACTIVE)) {
+		IWL_DEBUG_INFO(priv, "Removing %pM but non UCODE active\n",
+				addr);
+		goto out_err;
+	}
+
+	if (priv->stations[sta_id].used & IWL_STA_LOCAL) {
+		kfree(priv->stations[sta_id].lq);
+		priv->stations[sta_id].lq = NULL;
+	}
+
+	for (tid = 0; tid < IWL_MAX_TID_COUNT; tid++)
+		memset(&priv->tid_data[sta_id][tid], 0,
+			sizeof(priv->tid_data[sta_id][tid]));
+
+	priv->stations[sta_id].used &= ~IWL_STA_DRIVER_ACTIVE;
+
+	priv->num_stations--;
+
+	if (WARN_ON(priv->num_stations < 0))
+		priv->num_stations = 0;
+
+	spin_unlock_bh(&priv->sta_lock);
+
+	return iwl_send_remove_station(priv, addr, sta_id, false);
+out_err:
+	spin_unlock_bh(&priv->sta_lock);
+	return -EINVAL;
+}
+
+void iwl_deactivate_station(struct iwl_priv *priv, const u8 sta_id,
+			    const u8 *addr)
+{
+	u8 tid;
+
+	if (!iwl_is_ready(priv)) {
+		IWL_DEBUG_INFO(priv,
+			"Unable to remove station %pM, device not ready.\n",
+			addr);
+		return;
+	}
+
+	IWL_DEBUG_ASSOC(priv, "Deactivating STA: %pM (%d)\n", addr, sta_id);
+
+	if (WARN_ON_ONCE(sta_id == IWL_INVALID_STATION))
+		return;
+
+	spin_lock_bh(&priv->sta_lock);
+
+	WARN_ON_ONCE(!(priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE));
+
+	for (tid = 0; tid < IWL_MAX_TID_COUNT; tid++)
+		memset(&priv->tid_data[sta_id][tid], 0,
+			sizeof(priv->tid_data[sta_id][tid]));
+
+	priv->stations[sta_id].used &= ~IWL_STA_DRIVER_ACTIVE;
+
+	priv->num_stations--;
+
+	if (WARN_ON_ONCE(priv->num_stations < 0))
+		priv->num_stations = 0;
+
+	spin_unlock_bh(&priv->sta_lock);
+}
+
+static void iwl_sta_fill_lq(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
+			    u8 sta_id, struct iwl_link_quality_cmd *link_cmd)
+{
+	int i, r;
+	u32 rate_flags = 0;
+	__le32 rate_n_flags;
+
+	lockdep_assert_held(&priv->mutex);
+
+	memset(link_cmd, 0, sizeof(*link_cmd));
+
+	/* Set up the rate scaling to start at selected rate, fall back
+	 * all the way down to 1M in IEEE order, and then spin on 1M */
+	if (priv->band == IEEE80211_BAND_5GHZ)
+		r = IWL_RATE_6M_INDEX;
+	else if (ctx && ctx->vif && ctx->vif->p2p)
+		r = IWL_RATE_6M_INDEX;
+	else
+		r = IWL_RATE_1M_INDEX;
+
+	if (r >= IWL_FIRST_CCK_RATE && r <= IWL_LAST_CCK_RATE)
+		rate_flags |= RATE_MCS_CCK_MSK;
+
+	rate_flags |= first_antenna(priv->eeprom_data->valid_tx_ant) <<
+				RATE_MCS_ANT_POS;
+	rate_n_flags = iwl_hw_set_rate_n_flags(iwl_rates[r].plcp, rate_flags);
+	for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++)
+		link_cmd->rs_table[i].rate_n_flags = rate_n_flags;
+
+	link_cmd->general_params.single_stream_ant_msk =
+			first_antenna(priv->eeprom_data->valid_tx_ant);
+
+	link_cmd->general_params.dual_stream_ant_msk =
+		priv->eeprom_data->valid_tx_ant &
+		~first_antenna(priv->eeprom_data->valid_tx_ant);
+	if (!link_cmd->general_params.dual_stream_ant_msk) {
+		link_cmd->general_params.dual_stream_ant_msk = ANT_AB;
+	} else if (num_of_ant(priv->eeprom_data->valid_tx_ant) == 2) {
+		link_cmd->general_params.dual_stream_ant_msk =
+			priv->eeprom_data->valid_tx_ant;
+	}
+
+	link_cmd->agg_params.agg_dis_start_th =
+		LINK_QUAL_AGG_DISABLE_START_DEF;
+	link_cmd->agg_params.agg_time_limit =
+		cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
+
+	link_cmd->sta_id = sta_id;
+}
+
+/**
+ * iwl_clear_ucode_stations - clear ucode station table bits
+ *
+ * This function clears all the bits in the driver indicating
+ * which stations are active in the ucode. Call when something
+ * other than explicit station management would cause this in
+ * the ucode, e.g. unassociated RXON.
+ */
+void iwl_clear_ucode_stations(struct iwl_priv *priv,
+			      struct iwl_rxon_context *ctx)
+{
+	int i;
+	bool cleared = false;
+
+	IWL_DEBUG_INFO(priv, "Clearing ucode stations in driver\n");
+
+	spin_lock_bh(&priv->sta_lock);
+	for (i = 0; i < IWLAGN_STATION_COUNT; i++) {
+		if (ctx && ctx->ctxid != priv->stations[i].ctxid)
+			continue;
+
+		if (priv->stations[i].used & IWL_STA_UCODE_ACTIVE) {
+			IWL_DEBUG_INFO(priv,
+				"Clearing ucode active for station %d\n", i);
+			priv->stations[i].used &= ~IWL_STA_UCODE_ACTIVE;
+			cleared = true;
+		}
+	}
+	spin_unlock_bh(&priv->sta_lock);
+
+	if (!cleared)
+		IWL_DEBUG_INFO(priv,
+			       "No active stations found to be cleared\n");
+}
+
+/**
+ * iwl_restore_stations() - Restore driver known stations to device
+ *
+ * All stations considered active by driver, but not present in ucode, is
+ * restored.
+ *
+ * Function sleeps.
+ */
+void iwl_restore_stations(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
+{
+	struct iwl_addsta_cmd sta_cmd;
+	struct iwl_link_quality_cmd lq;
+	int i;
+	bool found = false;
+	int ret;
+	bool send_lq;
+
+	if (!iwl_is_ready(priv)) {
+		IWL_DEBUG_INFO(priv,
+			       "Not ready yet, not restoring any stations.\n");
+		return;
+	}
+
+	IWL_DEBUG_ASSOC(priv, "Restoring all known stations ... start.\n");
+	spin_lock_bh(&priv->sta_lock);
+	for (i = 0; i < IWLAGN_STATION_COUNT; i++) {
+		if (ctx->ctxid != priv->stations[i].ctxid)
+			continue;
+		if ((priv->stations[i].used & IWL_STA_DRIVER_ACTIVE) &&
+			    !(priv->stations[i].used & IWL_STA_UCODE_ACTIVE)) {
+			IWL_DEBUG_ASSOC(priv, "Restoring sta %pM\n",
+					priv->stations[i].sta.sta.addr);
+			priv->stations[i].sta.mode = 0;
+			priv->stations[i].used |= IWL_STA_UCODE_INPROGRESS;
+			found = true;
+		}
+	}
+
+	for (i = 0; i < IWLAGN_STATION_COUNT; i++) {
+		if ((priv->stations[i].used & IWL_STA_UCODE_INPROGRESS)) {
+			memcpy(&sta_cmd, &priv->stations[i].sta,
+			       sizeof(struct iwl_addsta_cmd));
+			send_lq = false;
+			if (priv->stations[i].lq) {
+				if (priv->wowlan)
+					iwl_sta_fill_lq(priv, ctx, i, &lq);
+				else
+					memcpy(&lq, priv->stations[i].lq,
+					       sizeof(struct iwl_link_quality_cmd));
+				send_lq = true;
+			}
+			spin_unlock_bh(&priv->sta_lock);
+			ret = iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC);
+			if (ret) {
+				spin_lock_bh(&priv->sta_lock);
+				IWL_ERR(priv, "Adding station %pM failed.\n",
+					priv->stations[i].sta.sta.addr);
+				priv->stations[i].used &=
+						~IWL_STA_DRIVER_ACTIVE;
+				priv->stations[i].used &=
+						~IWL_STA_UCODE_INPROGRESS;
+				continue;
+			}
+			/*
+			 * Rate scaling has already been initialized, send
+			 * current LQ command
+			 */
+			if (send_lq)
+				iwl_send_lq_cmd(priv, ctx, &lq,
+						CMD_SYNC, true);
+			spin_lock_bh(&priv->sta_lock);
+			priv->stations[i].used &= ~IWL_STA_UCODE_INPROGRESS;
+		}
+	}
+
+	spin_unlock_bh(&priv->sta_lock);
+	if (!found)
+		IWL_DEBUG_INFO(priv, "Restoring all known stations .... "
+			"no stations to be restored.\n");
+	else
+		IWL_DEBUG_INFO(priv, "Restoring all known stations .... "
+			"complete.\n");
+}
+
+int iwl_get_free_ucode_key_offset(struct iwl_priv *priv)
+{
+	int i;
+
+	for (i = 0; i < priv->sta_key_max_num; i++)
+		if (!test_and_set_bit(i, &priv->ucode_key_table))
+			return i;
+
+	return WEP_INVALID_OFFSET;
+}
+
+void iwl_dealloc_bcast_stations(struct iwl_priv *priv)
+{
+	int i;
+
+	spin_lock_bh(&priv->sta_lock);
+	for (i = 0; i < IWLAGN_STATION_COUNT; i++) {
+		if (!(priv->stations[i].used & IWL_STA_BCAST))
+			continue;
+
+		priv->stations[i].used &= ~IWL_STA_UCODE_ACTIVE;
+		priv->num_stations--;
+		if (WARN_ON(priv->num_stations < 0))
+			priv->num_stations = 0;
+		kfree(priv->stations[i].lq);
+		priv->stations[i].lq = NULL;
+	}
+	spin_unlock_bh(&priv->sta_lock);
+}
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+static void iwl_dump_lq_cmd(struct iwl_priv *priv,
+			   struct iwl_link_quality_cmd *lq)
+{
+	int i;
+	IWL_DEBUG_RATE(priv, "lq station id 0x%x\n", lq->sta_id);
+	IWL_DEBUG_RATE(priv, "lq ant 0x%X 0x%X\n",
+		       lq->general_params.single_stream_ant_msk,
+		       lq->general_params.dual_stream_ant_msk);
+
+	for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++)
+		IWL_DEBUG_RATE(priv, "lq index %d 0x%X\n",
+			       i, lq->rs_table[i].rate_n_flags);
+}
+#else
+static inline void iwl_dump_lq_cmd(struct iwl_priv *priv,
+				   struct iwl_link_quality_cmd *lq)
+{
+}
+#endif
+
+/**
+ * is_lq_table_valid() - Test one aspect of LQ cmd for validity
+ *
+ * It sometimes happens when a HT rate has been in use and we
+ * loose connectivity with AP then mac80211 will first tell us that the
+ * current channel is not HT anymore before removing the station. In such a
+ * scenario the RXON flags will be updated to indicate we are not
+ * communicating HT anymore, but the LQ command may still contain HT rates.
+ * Test for this to prevent driver from sending LQ command between the time
+ * RXON flags are updated and when LQ command is updated.
+ */
+static bool is_lq_table_valid(struct iwl_priv *priv,
+			      struct iwl_rxon_context *ctx,
+			      struct iwl_link_quality_cmd *lq)
+{
+	int i;
+
+	if (ctx->ht.enabled)
+		return true;
+
+	IWL_DEBUG_INFO(priv, "Channel %u is not an HT channel\n",
+		       ctx->active.channel);
+	for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) {
+		if (le32_to_cpu(lq->rs_table[i].rate_n_flags) &
+		    RATE_MCS_HT_MSK) {
+			IWL_DEBUG_INFO(priv,
+				       "index %d of LQ expects HT channel\n",
+				       i);
+			return false;
+		}
+	}
+	return true;
+}
+
+/**
+ * iwl_send_lq_cmd() - Send link quality command
+ * @init: This command is sent as part of station initialization right
+ *        after station has been added.
+ *
+ * The link quality command is sent as the last step of station creation.
+ * This is the special case in which init is set and we call a callback in
+ * this case to clear the state indicating that station creation is in
+ * progress.
+ */
+int iwl_send_lq_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
+		    struct iwl_link_quality_cmd *lq, u8 flags, bool init)
+{
+	int ret = 0;
+	struct iwl_host_cmd cmd = {
+		.id = REPLY_TX_LINK_QUALITY_CMD,
+		.len = { sizeof(struct iwl_link_quality_cmd), },
+		.flags = flags,
+		.data = { lq, },
+	};
+
+	if (WARN_ON(lq->sta_id == IWL_INVALID_STATION))
+		return -EINVAL;
+
+
+	spin_lock_bh(&priv->sta_lock);
+	if (!(priv->stations[lq->sta_id].used & IWL_STA_DRIVER_ACTIVE)) {
+		spin_unlock_bh(&priv->sta_lock);
+		return -EINVAL;
+	}
+	spin_unlock_bh(&priv->sta_lock);
+
+	iwl_dump_lq_cmd(priv, lq);
+	if (WARN_ON(init && (cmd.flags & CMD_ASYNC)))
+		return -EINVAL;
+
+	if (is_lq_table_valid(priv, ctx, lq))
+		ret = iwl_dvm_send_cmd(priv, &cmd);
+	else
+		ret = -EINVAL;
+
+	if (cmd.flags & CMD_ASYNC)
+		return ret;
+
+	if (init) {
+		IWL_DEBUG_INFO(priv, "init LQ command complete, "
+			       "clearing sta addition status for sta %d\n",
+			       lq->sta_id);
+		spin_lock_bh(&priv->sta_lock);
+		priv->stations[lq->sta_id].used &= ~IWL_STA_UCODE_INPROGRESS;
+		spin_unlock_bh(&priv->sta_lock);
+	}
+	return ret;
+}
+
+
+static struct iwl_link_quality_cmd *
+iwl_sta_alloc_lq(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
+		 u8 sta_id)
+{
+	struct iwl_link_quality_cmd *link_cmd;
+
+	link_cmd = kzalloc(sizeof(struct iwl_link_quality_cmd), GFP_KERNEL);
+	if (!link_cmd) {
+		IWL_ERR(priv, "Unable to allocate memory for LQ cmd.\n");
+		return NULL;
+	}
+
+	iwl_sta_fill_lq(priv, ctx, sta_id, link_cmd);
+
+	return link_cmd;
+}
+
+/*
+ * iwlagn_add_bssid_station - Add the special IBSS BSSID station
+ *
+ * Function sleeps.
+ */
+int iwlagn_add_bssid_station(struct iwl_priv *priv,
+			     struct iwl_rxon_context *ctx,
+			     const u8 *addr, u8 *sta_id_r)
+{
+	int ret;
+	u8 sta_id;
+	struct iwl_link_quality_cmd *link_cmd;
+
+	if (sta_id_r)
+		*sta_id_r = IWL_INVALID_STATION;
+
+	ret = iwl_add_station_common(priv, ctx, addr, 0, NULL, &sta_id);
+	if (ret) {
+		IWL_ERR(priv, "Unable to add station %pM\n", addr);
+		return ret;
+	}
+
+	if (sta_id_r)
+		*sta_id_r = sta_id;
+
+	spin_lock_bh(&priv->sta_lock);
+	priv->stations[sta_id].used |= IWL_STA_LOCAL;
+	spin_unlock_bh(&priv->sta_lock);
+
+	/* Set up default rate scaling table in device's station table */
+	link_cmd = iwl_sta_alloc_lq(priv, ctx, sta_id);
+	if (!link_cmd) {
+		IWL_ERR(priv,
+			"Unable to initialize rate scaling for station %pM.\n",
+			addr);
+		return -ENOMEM;
+	}
+
+	ret = iwl_send_lq_cmd(priv, ctx, link_cmd, CMD_SYNC, true);
+	if (ret)
+		IWL_ERR(priv, "Link quality command failed (%d)\n", ret);
+
+	spin_lock_bh(&priv->sta_lock);
+	priv->stations[sta_id].lq = link_cmd;
+	spin_unlock_bh(&priv->sta_lock);
+
+	return 0;
+}
+
+/*
+ * static WEP keys
+ *
+ * For each context, the device has a table of 4 static WEP keys
+ * (one for each key index) that is updated with the following
+ * commands.
+ */
+
+static int iwl_send_static_wepkey_cmd(struct iwl_priv *priv,
+				      struct iwl_rxon_context *ctx,
+				      bool send_if_empty)
+{
+	int i, not_empty = 0;
+	u8 buff[sizeof(struct iwl_wep_cmd) +
+		sizeof(struct iwl_wep_key) * WEP_KEYS_MAX];
+	struct iwl_wep_cmd *wep_cmd = (struct iwl_wep_cmd *)buff;
+	size_t cmd_size  = sizeof(struct iwl_wep_cmd);
+	struct iwl_host_cmd cmd = {
+		.id = ctx->wep_key_cmd,
+		.data = { wep_cmd, },
+		.flags = CMD_SYNC,
+	};
+
+	might_sleep();
+
+	memset(wep_cmd, 0, cmd_size +
+			(sizeof(struct iwl_wep_key) * WEP_KEYS_MAX));
+
+	for (i = 0; i < WEP_KEYS_MAX ; i++) {
+		wep_cmd->key[i].key_index = i;
+		if (ctx->wep_keys[i].key_size) {
+			wep_cmd->key[i].key_offset = i;
+			not_empty = 1;
+		} else {
+			wep_cmd->key[i].key_offset = WEP_INVALID_OFFSET;
+		}
+
+		wep_cmd->key[i].key_size = ctx->wep_keys[i].key_size;
+		memcpy(&wep_cmd->key[i].key[3], ctx->wep_keys[i].key,
+				ctx->wep_keys[i].key_size);
+	}
+
+	wep_cmd->global_key_type = WEP_KEY_WEP_TYPE;
+	wep_cmd->num_keys = WEP_KEYS_MAX;
+
+	cmd_size += sizeof(struct iwl_wep_key) * WEP_KEYS_MAX;
+
+	cmd.len[0] = cmd_size;
+
+	if (not_empty || send_if_empty)
+		return iwl_dvm_send_cmd(priv, &cmd);
+	else
+		return 0;
+}
+
+int iwl_restore_default_wep_keys(struct iwl_priv *priv,
+				 struct iwl_rxon_context *ctx)
+{
+	lockdep_assert_held(&priv->mutex);
+
+	return iwl_send_static_wepkey_cmd(priv, ctx, false);
+}
+
+int iwl_remove_default_wep_key(struct iwl_priv *priv,
+			       struct iwl_rxon_context *ctx,
+			       struct ieee80211_key_conf *keyconf)
+{
+	int ret;
+
+	lockdep_assert_held(&priv->mutex);
+
+	IWL_DEBUG_WEP(priv, "Removing default WEP key: idx=%d\n",
+		      keyconf->keyidx);
+
+	memset(&ctx->wep_keys[keyconf->keyidx], 0, sizeof(ctx->wep_keys[0]));
+	if (iwl_is_rfkill(priv)) {
+		IWL_DEBUG_WEP(priv,
+			"Not sending REPLY_WEPKEY command due to RFKILL.\n");
+		/* but keys in device are clear anyway so return success */
+		return 0;
+	}
+	ret = iwl_send_static_wepkey_cmd(priv, ctx, 1);
+	IWL_DEBUG_WEP(priv, "Remove default WEP key: idx=%d ret=%d\n",
+		      keyconf->keyidx, ret);
+
+	return ret;
+}
+
+int iwl_set_default_wep_key(struct iwl_priv *priv,
+			    struct iwl_rxon_context *ctx,
+			    struct ieee80211_key_conf *keyconf)
+{
+	int ret;
+
+	lockdep_assert_held(&priv->mutex);
+
+	if (keyconf->keylen != WEP_KEY_LEN_128 &&
+	    keyconf->keylen != WEP_KEY_LEN_64) {
+		IWL_DEBUG_WEP(priv,
+			      "Bad WEP key length %d\n", keyconf->keylen);
+		return -EINVAL;
+	}
+
+	keyconf->hw_key_idx = IWLAGN_HW_KEY_DEFAULT;
+
+	ctx->wep_keys[keyconf->keyidx].key_size = keyconf->keylen;
+	memcpy(&ctx->wep_keys[keyconf->keyidx].key, &keyconf->key,
+							keyconf->keylen);
+
+	ret = iwl_send_static_wepkey_cmd(priv, ctx, false);
+	IWL_DEBUG_WEP(priv, "Set default WEP key: len=%d idx=%d ret=%d\n",
+		keyconf->keylen, keyconf->keyidx, ret);
+
+	return ret;
+}
+
+/*
+ * dynamic (per-station) keys
+ *
+ * The dynamic keys are a little more complicated. The device has
+ * a key cache of up to STA_KEY_MAX_NUM/STA_KEY_MAX_NUM_PAN keys.
+ * These are linked to stations by a table that contains an index
+ * into the key table for each station/key index/{mcast,unicast},
+ * i.e. it's basically an array of pointers like this:
+ *	key_offset_t key_mapping[NUM_STATIONS][4][2];
+ * (it really works differently, but you can think of it as such)
+ *
+ * The key uploading and linking happens in the same command, the
+ * add station command with STA_MODIFY_KEY_MASK.
+ */
+
+static u8 iwlagn_key_sta_id(struct iwl_priv *priv,
+			    struct ieee80211_vif *vif,
+			    struct ieee80211_sta *sta)
+{
+	struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
+
+	if (sta)
+		return iwl_sta_id(sta);
+
+	/*
+	 * The device expects GTKs for station interfaces to be
+	 * installed as GTKs for the AP station. If we have no
+	 * station ID, then use the ap_sta_id in that case.
+	 */
+	if (vif->type == NL80211_IFTYPE_STATION && vif_priv->ctx)
+		return vif_priv->ctx->ap_sta_id;
+
+	return IWL_INVALID_STATION;
+}
+
+static int iwlagn_send_sta_key(struct iwl_priv *priv,
+			       struct ieee80211_key_conf *keyconf,
+			       u8 sta_id, u32 tkip_iv32, u16 *tkip_p1k,
+			       u32 cmd_flags)
+{
+	__le16 key_flags;
+	struct iwl_addsta_cmd sta_cmd;
+	int i;
+
+	spin_lock_bh(&priv->sta_lock);
+	memcpy(&sta_cmd, &priv->stations[sta_id].sta, sizeof(sta_cmd));
+	spin_unlock_bh(&priv->sta_lock);
+
+	key_flags = cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
+	key_flags |= STA_KEY_FLG_MAP_KEY_MSK;
+
+	switch (keyconf->cipher) {
+	case WLAN_CIPHER_SUITE_CCMP:
+		key_flags |= STA_KEY_FLG_CCMP;
+		memcpy(sta_cmd.key.key, keyconf->key, keyconf->keylen);
+		break;
+	case WLAN_CIPHER_SUITE_TKIP:
+		key_flags |= STA_KEY_FLG_TKIP;
+		sta_cmd.key.tkip_rx_tsc_byte2 = tkip_iv32;
+		for (i = 0; i < 5; i++)
+			sta_cmd.key.tkip_rx_ttak[i] = cpu_to_le16(tkip_p1k[i]);
+		memcpy(sta_cmd.key.key, keyconf->key, keyconf->keylen);
+		break;
+	case WLAN_CIPHER_SUITE_WEP104:
+		key_flags |= STA_KEY_FLG_KEY_SIZE_MSK;
+		/* fall through */
+	case WLAN_CIPHER_SUITE_WEP40:
+		key_flags |= STA_KEY_FLG_WEP;
+		memcpy(&sta_cmd.key.key[3], keyconf->key, keyconf->keylen);
+		break;
+	default:
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	if (!(keyconf->flags & IEEE80211_KEY_FLAG_PAIRWISE))
+		key_flags |= STA_KEY_MULTICAST_MSK;
+
+	/* key pointer (offset) */
+	sta_cmd.key.key_offset = keyconf->hw_key_idx;
+
+	sta_cmd.key.key_flags = key_flags;
+	sta_cmd.mode = STA_CONTROL_MODIFY_MSK;
+	sta_cmd.sta.modify_mask = STA_MODIFY_KEY_MASK;
+
+	return iwl_send_add_sta(priv, &sta_cmd, cmd_flags);
+}
+
+void iwl_update_tkip_key(struct iwl_priv *priv,
+			 struct ieee80211_vif *vif,
+			 struct ieee80211_key_conf *keyconf,
+			 struct ieee80211_sta *sta, u32 iv32, u16 *phase1key)
+{
+	u8 sta_id = iwlagn_key_sta_id(priv, vif, sta);
+
+	if (sta_id == IWL_INVALID_STATION)
+		return;
+
+	if (iwl_scan_cancel(priv)) {
+		/* cancel scan failed, just live w/ bad key and rely
+		   briefly on SW decryption */
+		return;
+	}
+
+	iwlagn_send_sta_key(priv, keyconf, sta_id,
+			    iv32, phase1key, CMD_ASYNC);
+}
+
+int iwl_remove_dynamic_key(struct iwl_priv *priv,
+			   struct iwl_rxon_context *ctx,
+			   struct ieee80211_key_conf *keyconf,
+			   struct ieee80211_sta *sta)
+{
+	struct iwl_addsta_cmd sta_cmd;
+	u8 sta_id = iwlagn_key_sta_id(priv, ctx->vif, sta);
+	__le16 key_flags;
+
+	/* if station isn't there, neither is the key */
+	if (sta_id == IWL_INVALID_STATION)
+		return -ENOENT;
+
+	spin_lock_bh(&priv->sta_lock);
+	memcpy(&sta_cmd, &priv->stations[sta_id].sta, sizeof(sta_cmd));
+	if (!(priv->stations[sta_id].used & IWL_STA_UCODE_ACTIVE))
+		sta_id = IWL_INVALID_STATION;
+	spin_unlock_bh(&priv->sta_lock);
+
+	if (sta_id == IWL_INVALID_STATION)
+		return 0;
+
+	lockdep_assert_held(&priv->mutex);
+
+	ctx->key_mapping_keys--;
+
+	IWL_DEBUG_WEP(priv, "Remove dynamic key: idx=%d sta=%d\n",
+		      keyconf->keyidx, sta_id);
+
+	if (!test_and_clear_bit(keyconf->hw_key_idx, &priv->ucode_key_table))
+		IWL_ERR(priv, "offset %d not used in uCode key table.\n",
+			keyconf->hw_key_idx);
+
+	key_flags = cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
+	key_flags |= STA_KEY_FLG_MAP_KEY_MSK | STA_KEY_FLG_NO_ENC |
+		     STA_KEY_FLG_INVALID;
+
+	if (!(keyconf->flags & IEEE80211_KEY_FLAG_PAIRWISE))
+		key_flags |= STA_KEY_MULTICAST_MSK;
+
+	sta_cmd.key.key_flags = key_flags;
+	sta_cmd.key.key_offset = keyconf->hw_key_idx;
+	sta_cmd.sta.modify_mask = STA_MODIFY_KEY_MASK;
+	sta_cmd.mode = STA_CONTROL_MODIFY_MSK;
+
+	return iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC);
+}
+
+int iwl_set_dynamic_key(struct iwl_priv *priv,
+			struct iwl_rxon_context *ctx,
+			struct ieee80211_key_conf *keyconf,
+			struct ieee80211_sta *sta)
+{
+	struct ieee80211_key_seq seq;
+	u16 p1k[5];
+	int ret;
+	u8 sta_id = iwlagn_key_sta_id(priv, ctx->vif, sta);
+	const u8 *addr;
+
+	if (sta_id == IWL_INVALID_STATION)
+		return -EINVAL;
+
+	lockdep_assert_held(&priv->mutex);
+
+	keyconf->hw_key_idx = iwl_get_free_ucode_key_offset(priv);
+	if (keyconf->hw_key_idx == WEP_INVALID_OFFSET)
+		return -ENOSPC;
+
+	ctx->key_mapping_keys++;
+
+	switch (keyconf->cipher) {
+	case WLAN_CIPHER_SUITE_TKIP:
+		if (sta)
+			addr = sta->addr;
+		else /* station mode case only */
+			addr = ctx->active.bssid_addr;
+
+		/* pre-fill phase 1 key into device cache */
+		ieee80211_get_key_rx_seq(keyconf, 0, &seq);
+		ieee80211_get_tkip_rx_p1k(keyconf, addr, seq.tkip.iv32, p1k);
+		ret = iwlagn_send_sta_key(priv, keyconf, sta_id,
+					  seq.tkip.iv32, p1k, CMD_SYNC);
+		break;
+	case WLAN_CIPHER_SUITE_CCMP:
+	case WLAN_CIPHER_SUITE_WEP40:
+	case WLAN_CIPHER_SUITE_WEP104:
+		ret = iwlagn_send_sta_key(priv, keyconf, sta_id,
+					  0, NULL, CMD_SYNC);
+		break;
+	default:
+		IWL_ERR(priv, "Unknown cipher %x\n", keyconf->cipher);
+		ret = -EINVAL;
+	}
+
+	if (ret) {
+		ctx->key_mapping_keys--;
+		clear_bit(keyconf->hw_key_idx, &priv->ucode_key_table);
+	}
+
+	IWL_DEBUG_WEP(priv, "Set dynamic key: cipher=%x len=%d idx=%d sta=%pM ret=%d\n",
+		      keyconf->cipher, keyconf->keylen, keyconf->keyidx,
+		      sta ? sta->addr : NULL, ret);
+
+	return ret;
+}
+
+/**
+ * iwlagn_alloc_bcast_station - add broadcast station into driver's station table.
+ *
+ * This adds the broadcast station into the driver's station table
+ * and marks it driver active, so that it will be restored to the
+ * device at the next best time.
+ */
+int iwlagn_alloc_bcast_station(struct iwl_priv *priv,
+			       struct iwl_rxon_context *ctx)
+{
+	struct iwl_link_quality_cmd *link_cmd;
+	u8 sta_id;
+
+	spin_lock_bh(&priv->sta_lock);
+	sta_id = iwl_prep_station(priv, ctx, iwl_bcast_addr, false, NULL);
+	if (sta_id == IWL_INVALID_STATION) {
+		IWL_ERR(priv, "Unable to prepare broadcast station\n");
+		spin_unlock_bh(&priv->sta_lock);
+
+		return -EINVAL;
+	}
+
+	priv->stations[sta_id].used |= IWL_STA_DRIVER_ACTIVE;
+	priv->stations[sta_id].used |= IWL_STA_BCAST;
+	spin_unlock_bh(&priv->sta_lock);
+
+	link_cmd = iwl_sta_alloc_lq(priv, ctx, sta_id);
+	if (!link_cmd) {
+		IWL_ERR(priv,
+			"Unable to initialize rate scaling for bcast station.\n");
+		return -ENOMEM;
+	}
+
+	spin_lock_bh(&priv->sta_lock);
+	priv->stations[sta_id].lq = link_cmd;
+	spin_unlock_bh(&priv->sta_lock);
+
+	return 0;
+}
+
+/**
+ * iwl_update_bcast_station - update broadcast station's LQ command
+ *
+ * Only used by iwlagn. Placed here to have all bcast station management
+ * code together.
+ */
+int iwl_update_bcast_station(struct iwl_priv *priv,
+			     struct iwl_rxon_context *ctx)
+{
+	struct iwl_link_quality_cmd *link_cmd;
+	u8 sta_id = ctx->bcast_sta_id;
+
+	link_cmd = iwl_sta_alloc_lq(priv, ctx, sta_id);
+	if (!link_cmd) {
+		IWL_ERR(priv, "Unable to initialize rate scaling for bcast station.\n");
+		return -ENOMEM;
+	}
+
+	spin_lock_bh(&priv->sta_lock);
+	if (priv->stations[sta_id].lq)
+		kfree(priv->stations[sta_id].lq);
+	else
+		IWL_DEBUG_INFO(priv, "Bcast station rate scaling has not been initialized yet.\n");
+	priv->stations[sta_id].lq = link_cmd;
+	spin_unlock_bh(&priv->sta_lock);
+
+	return 0;
+}
+
+int iwl_update_bcast_stations(struct iwl_priv *priv)
+{
+	struct iwl_rxon_context *ctx;
+	int ret = 0;
+
+	for_each_context(priv, ctx) {
+		ret = iwl_update_bcast_station(priv, ctx);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+/**
+ * iwl_sta_tx_modify_enable_tid - Enable Tx for this TID in station table
+ */
+int iwl_sta_tx_modify_enable_tid(struct iwl_priv *priv, int sta_id, int tid)
+{
+	struct iwl_addsta_cmd sta_cmd;
+
+	lockdep_assert_held(&priv->mutex);
+
+	/* Remove "disable" flag, to enable Tx for this TID */
+	spin_lock_bh(&priv->sta_lock);
+	priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_TID_DISABLE_TX;
+	priv->stations[sta_id].sta.tid_disable_tx &= cpu_to_le16(~(1 << tid));
+	priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+	memcpy(&sta_cmd, &priv->stations[sta_id].sta, sizeof(struct iwl_addsta_cmd));
+	spin_unlock_bh(&priv->sta_lock);
+
+	return iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC);
+}
+
+int iwl_sta_rx_agg_start(struct iwl_priv *priv, struct ieee80211_sta *sta,
+			 int tid, u16 ssn)
+{
+	int sta_id;
+	struct iwl_addsta_cmd sta_cmd;
+
+	lockdep_assert_held(&priv->mutex);
+
+	sta_id = iwl_sta_id(sta);
+	if (sta_id == IWL_INVALID_STATION)
+		return -ENXIO;
+
+	spin_lock_bh(&priv->sta_lock);
+	priv->stations[sta_id].sta.station_flags_msk = 0;
+	priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_ADDBA_TID_MSK;
+	priv->stations[sta_id].sta.add_immediate_ba_tid = (u8)tid;
+	priv->stations[sta_id].sta.add_immediate_ba_ssn = cpu_to_le16(ssn);
+	priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+	memcpy(&sta_cmd, &priv->stations[sta_id].sta, sizeof(struct iwl_addsta_cmd));
+	spin_unlock_bh(&priv->sta_lock);
+
+	return iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC);
+}
+
+int iwl_sta_rx_agg_stop(struct iwl_priv *priv, struct ieee80211_sta *sta,
+			int tid)
+{
+	int sta_id;
+	struct iwl_addsta_cmd sta_cmd;
+
+	lockdep_assert_held(&priv->mutex);
+
+	sta_id = iwl_sta_id(sta);
+	if (sta_id == IWL_INVALID_STATION) {
+		IWL_ERR(priv, "Invalid station for AGG tid %d\n", tid);
+		return -ENXIO;
+	}
+
+	spin_lock_bh(&priv->sta_lock);
+	priv->stations[sta_id].sta.station_flags_msk = 0;
+	priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_DELBA_TID_MSK;
+	priv->stations[sta_id].sta.remove_immediate_ba_tid = (u8)tid;
+	priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+	memcpy(&sta_cmd, &priv->stations[sta_id].sta, sizeof(struct iwl_addsta_cmd));
+	spin_unlock_bh(&priv->sta_lock);
+
+	return iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC);
+}
+
+
+
+void iwl_sta_modify_sleep_tx_count(struct iwl_priv *priv, int sta_id, int cnt)
+{
+	struct iwl_addsta_cmd cmd = {
+		.mode = STA_CONTROL_MODIFY_MSK,
+		.station_flags = STA_FLG_PWR_SAVE_MSK,
+		.station_flags_msk = STA_FLG_PWR_SAVE_MSK,
+		.sta.sta_id = sta_id,
+		.sta.modify_mask = STA_MODIFY_SLEEP_TX_COUNT_MSK,
+		.sleep_tx_count = cpu_to_le16(cnt),
+	};
+
+	iwl_send_add_sta(priv, &cmd, CMD_ASYNC);
+}
diff --git a/drivers/net/wireless/iwlwifi/dvm/testmode.c b/drivers/net/wireless/iwlwifi/dvm/testmode.c
new file mode 100644
index 00000000000..57b918ce3b5
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/testmode.c
@@ -0,0 +1,471 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2010 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010 - 2012 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <net/net_namespace.h>
+#include <linux/netdevice.h>
+#include <net/cfg80211.h>
+#include <net/mac80211.h>
+#include <net/netlink.h>
+
+#include "iwl-debug.h"
+#include "iwl-trans.h"
+#include "dev.h"
+#include "agn.h"
+#include "iwl-test.h"
+#include "iwl-testmode.h"
+
+static int iwl_testmode_send_cmd(struct iwl_op_mode *op_mode,
+				 struct iwl_host_cmd *cmd)
+{
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+	return iwl_dvm_send_cmd(priv, cmd);
+}
+
+static bool iwl_testmode_valid_hw_addr(u32 addr)
+{
+	if (iwlagn_hw_valid_rtc_data_addr(addr))
+		return true;
+
+	if (IWLAGN_RTC_INST_LOWER_BOUND <= addr &&
+	    addr < IWLAGN_RTC_INST_UPPER_BOUND)
+		return true;
+
+	return false;
+}
+
+static u32 iwl_testmode_get_fw_ver(struct iwl_op_mode *op_mode)
+{
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+	return priv->fw->ucode_ver;
+}
+
+static struct sk_buff*
+iwl_testmode_alloc_reply(struct iwl_op_mode *op_mode, int len)
+{
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+	return cfg80211_testmode_alloc_reply_skb(priv->hw->wiphy, len);
+}
+
+static int iwl_testmode_reply(struct iwl_op_mode *op_mode, struct sk_buff *skb)
+{
+	return cfg80211_testmode_reply(skb);
+}
+
+static struct sk_buff *iwl_testmode_alloc_event(struct iwl_op_mode *op_mode,
+						int len)
+{
+	struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
+	return cfg80211_testmode_alloc_event_skb(priv->hw->wiphy, len,
+						 GFP_ATOMIC);
+}
+
+static void iwl_testmode_event(struct iwl_op_mode *op_mode, struct sk_buff *skb)
+{
+	return cfg80211_testmode_event(skb, GFP_ATOMIC);
+}
+
+static struct iwl_test_ops tst_ops = {
+	.send_cmd = iwl_testmode_send_cmd,
+	.valid_hw_addr = iwl_testmode_valid_hw_addr,
+	.get_fw_ver = iwl_testmode_get_fw_ver,
+	.alloc_reply = iwl_testmode_alloc_reply,
+	.reply = iwl_testmode_reply,
+	.alloc_event = iwl_testmode_alloc_event,
+	.event = iwl_testmode_event,
+};
+
+void iwl_testmode_init(struct iwl_priv *priv)
+{
+	iwl_test_init(&priv->tst, priv->trans, &tst_ops);
+}
+
+void iwl_testmode_free(struct iwl_priv *priv)
+{
+	iwl_test_free(&priv->tst);
+}
+
+static int iwl_testmode_cfg_init_calib(struct iwl_priv *priv)
+{
+	struct iwl_notification_wait calib_wait;
+	static const u8 calib_complete[] = {
+		CALIBRATION_COMPLETE_NOTIFICATION
+	};
+	int ret;
+
+	iwl_init_notification_wait(&priv->notif_wait, &calib_wait,
+				   calib_complete, ARRAY_SIZE(calib_complete),
+				   NULL, NULL);
+	ret = iwl_init_alive_start(priv);
+	if (ret) {
+		IWL_ERR(priv, "Fail init calibration: %d\n", ret);
+		goto cfg_init_calib_error;
+	}
+
+	ret = iwl_wait_notification(&priv->notif_wait, &calib_wait, 2 * HZ);
+	if (ret)
+		IWL_ERR(priv, "Error detecting"
+			" CALIBRATION_COMPLETE_NOTIFICATION: %d\n", ret);
+	return ret;
+
+cfg_init_calib_error:
+	iwl_remove_notification(&priv->notif_wait, &calib_wait);
+	return ret;
+}
+
+/*
+ * This function handles the user application commands for driver.
+ *
+ * It retrieves command ID carried with IWL_TM_ATTR_COMMAND and calls to the
+ * handlers respectively.
+ *
+ * If it's an unknown commdn ID, -ENOSYS is replied; otherwise, the returned
+ * value of the actual command execution is replied to the user application.
+ *
+ * If there's any message responding to the user space, IWL_TM_ATTR_SYNC_RSP
+ * is used for carry the message while IWL_TM_ATTR_COMMAND must set to
+ * IWL_TM_CMD_DEV2APP_SYNC_RSP.
+ *
+ * @hw: ieee80211_hw object that represents the device
+ * @tb: gnl message fields from the user space
+ */
+static int iwl_testmode_driver(struct ieee80211_hw *hw, struct nlattr **tb)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	struct iwl_trans *trans = priv->trans;
+	struct sk_buff *skb;
+	unsigned char *rsp_data_ptr = NULL;
+	int status = 0, rsp_data_len = 0;
+	u32 inst_size = 0, data_size = 0;
+	const struct fw_img *img;
+
+	switch (nla_get_u32(tb[IWL_TM_ATTR_COMMAND])) {
+	case IWL_TM_CMD_APP2DEV_GET_DEVICENAME:
+		rsp_data_ptr = (unsigned char *)priv->cfg->name;
+		rsp_data_len = strlen(priv->cfg->name);
+		skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy,
+							rsp_data_len + 20);
+		if (!skb) {
+			IWL_ERR(priv, "Memory allocation fail\n");
+			return -ENOMEM;
+		}
+		if (nla_put_u32(skb, IWL_TM_ATTR_COMMAND,
+				IWL_TM_CMD_DEV2APP_SYNC_RSP) ||
+		    nla_put(skb, IWL_TM_ATTR_SYNC_RSP,
+			    rsp_data_len, rsp_data_ptr))
+			goto nla_put_failure;
+		status = cfg80211_testmode_reply(skb);
+		if (status < 0)
+			IWL_ERR(priv, "Error sending msg : %d\n", status);
+		break;
+
+	case IWL_TM_CMD_APP2DEV_LOAD_INIT_FW:
+		status = iwl_load_ucode_wait_alive(priv, IWL_UCODE_INIT);
+		if (status)
+			IWL_ERR(priv, "Error loading init ucode: %d\n", status);
+		break;
+
+	case IWL_TM_CMD_APP2DEV_CFG_INIT_CALIB:
+		iwl_testmode_cfg_init_calib(priv);
+		priv->ucode_loaded = false;
+		iwl_trans_stop_device(trans);
+		break;
+
+	case IWL_TM_CMD_APP2DEV_LOAD_RUNTIME_FW:
+		status = iwl_load_ucode_wait_alive(priv, IWL_UCODE_REGULAR);
+		if (status) {
+			IWL_ERR(priv,
+				"Error loading runtime ucode: %d\n", status);
+			break;
+		}
+		status = iwl_alive_start(priv);
+		if (status)
+			IWL_ERR(priv,
+				"Error starting the device: %d\n", status);
+		break;
+
+	case IWL_TM_CMD_APP2DEV_LOAD_WOWLAN_FW:
+		iwl_scan_cancel_timeout(priv, 200);
+		priv->ucode_loaded = false;
+		iwl_trans_stop_device(trans);
+		status = iwl_load_ucode_wait_alive(priv, IWL_UCODE_WOWLAN);
+		if (status) {
+			IWL_ERR(priv,
+				"Error loading WOWLAN ucode: %d\n", status);
+			break;
+		}
+		status = iwl_alive_start(priv);
+		if (status)
+			IWL_ERR(priv,
+				"Error starting the device: %d\n", status);
+		break;
+
+	case IWL_TM_CMD_APP2DEV_GET_EEPROM:
+		if (priv->eeprom_blob) {
+			skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy,
+				priv->eeprom_blob_size + 20);
+			if (!skb) {
+				IWL_ERR(priv, "Memory allocation fail\n");
+				return -ENOMEM;
+			}
+			if (nla_put_u32(skb, IWL_TM_ATTR_COMMAND,
+					IWL_TM_CMD_DEV2APP_EEPROM_RSP) ||
+			    nla_put(skb, IWL_TM_ATTR_EEPROM,
+				    priv->eeprom_blob_size,
+				    priv->eeprom_blob))
+				goto nla_put_failure;
+			status = cfg80211_testmode_reply(skb);
+			if (status < 0)
+				IWL_ERR(priv, "Error sending msg : %d\n",
+					status);
+		} else
+			return -ENODATA;
+		break;
+
+	case IWL_TM_CMD_APP2DEV_FIXRATE_REQ:
+		if (!tb[IWL_TM_ATTR_FIXRATE]) {
+			IWL_ERR(priv, "Missing fixrate setting\n");
+			return -ENOMSG;
+		}
+		priv->tm_fixed_rate = nla_get_u32(tb[IWL_TM_ATTR_FIXRATE]);
+		break;
+
+	case IWL_TM_CMD_APP2DEV_GET_FW_INFO:
+		skb = cfg80211_testmode_alloc_reply_skb(hw->wiphy, 20 + 8);
+		if (!skb) {
+			IWL_ERR(priv, "Memory allocation fail\n");
+			return -ENOMEM;
+		}
+		if (!priv->ucode_loaded) {
+			IWL_ERR(priv, "No uCode has not been loaded\n");
+			return -EINVAL;
+		} else {
+			img = &priv->fw->img[priv->cur_ucode];
+			inst_size = img->sec[IWL_UCODE_SECTION_INST].len;
+			data_size = img->sec[IWL_UCODE_SECTION_DATA].len;
+		}
+		if (nla_put_u32(skb, IWL_TM_ATTR_FW_TYPE, priv->cur_ucode) ||
+		    nla_put_u32(skb, IWL_TM_ATTR_FW_INST_SIZE, inst_size) ||
+		    nla_put_u32(skb, IWL_TM_ATTR_FW_DATA_SIZE, data_size))
+			goto nla_put_failure;
+		status = cfg80211_testmode_reply(skb);
+		if (status < 0)
+			IWL_ERR(priv, "Error sending msg : %d\n", status);
+		break;
+
+	default:
+		IWL_ERR(priv, "Unknown testmode driver command ID\n");
+		return -ENOSYS;
+	}
+	return status;
+
+nla_put_failure:
+	kfree_skb(skb);
+	return -EMSGSIZE;
+}
+
+/*
+ * This function handles the user application switch ucode ownership.
+ *
+ * It retrieves the mandatory fields IWL_TM_ATTR_UCODE_OWNER and
+ * decide who the current owner of the uCode
+ *
+ * If the current owner is OWNERSHIP_TM, then the only host command
+ * can deliver to uCode is from testmode, all the other host commands
+ * will dropped.
+ *
+ * default driver is the owner of uCode in normal operational mode
+ *
+ * @hw: ieee80211_hw object that represents the device
+ * @tb: gnl message fields from the user space
+ */
+static int iwl_testmode_ownership(struct ieee80211_hw *hw, struct nlattr **tb)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	u8 owner;
+
+	if (!tb[IWL_TM_ATTR_UCODE_OWNER]) {
+		IWL_ERR(priv, "Missing ucode owner\n");
+		return -ENOMSG;
+	}
+
+	owner = nla_get_u8(tb[IWL_TM_ATTR_UCODE_OWNER]);
+	if (owner == IWL_OWNERSHIP_DRIVER) {
+		priv->ucode_owner = owner;
+		iwl_test_enable_notifications(&priv->tst, false);
+	} else if (owner == IWL_OWNERSHIP_TM) {
+		priv->ucode_owner = owner;
+		iwl_test_enable_notifications(&priv->tst, true);
+	} else {
+		IWL_ERR(priv, "Invalid owner\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/* The testmode gnl message handler that takes the gnl message from the
+ * user space and parses it per the policy iwl_testmode_gnl_msg_policy, then
+ * invoke the corresponding handlers.
+ *
+ * This function is invoked when there is user space application sending
+ * gnl message through the testmode tunnel NL80211_CMD_TESTMODE regulated
+ * by nl80211.
+ *
+ * It retrieves the mandatory field, IWL_TM_ATTR_COMMAND, before
+ * dispatching it to the corresponding handler.
+ *
+ * If IWL_TM_ATTR_COMMAND is missing, -ENOMSG is replied to user application;
+ * -ENOSYS is replied to the user application if the command is unknown;
+ * Otherwise, the command is dispatched to the respective handler.
+ *
+ * @hw: ieee80211_hw object that represents the device
+ * @data: pointer to user space message
+ * @len: length in byte of @data
+ */
+int iwlagn_mac_testmode_cmd(struct ieee80211_hw *hw, void *data, int len)
+{
+	struct nlattr *tb[IWL_TM_ATTR_MAX];
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	int result;
+
+	result = iwl_test_parse(&priv->tst, tb, data, len);
+	if (result)
+		return result;
+
+	/* in case multiple accesses to the device happens */
+	mutex_lock(&priv->mutex);
+	switch (nla_get_u32(tb[IWL_TM_ATTR_COMMAND])) {
+	case IWL_TM_CMD_APP2DEV_UCODE:
+	case IWL_TM_CMD_APP2DEV_DIRECT_REG_READ32:
+	case IWL_TM_CMD_APP2DEV_DIRECT_REG_WRITE32:
+	case IWL_TM_CMD_APP2DEV_DIRECT_REG_WRITE8:
+	case IWL_TM_CMD_APP2DEV_BEGIN_TRACE:
+	case IWL_TM_CMD_APP2DEV_END_TRACE:
+	case IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_READ:
+	case IWL_TM_CMD_APP2DEV_NOTIFICATIONS:
+	case IWL_TM_CMD_APP2DEV_GET_FW_VERSION:
+	case IWL_TM_CMD_APP2DEV_GET_DEVICE_ID:
+	case IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_WRITE:
+		result = iwl_test_handle_cmd(&priv->tst, tb);
+		break;
+
+	case IWL_TM_CMD_APP2DEV_GET_DEVICENAME:
+	case IWL_TM_CMD_APP2DEV_LOAD_INIT_FW:
+	case IWL_TM_CMD_APP2DEV_CFG_INIT_CALIB:
+	case IWL_TM_CMD_APP2DEV_LOAD_RUNTIME_FW:
+	case IWL_TM_CMD_APP2DEV_GET_EEPROM:
+	case IWL_TM_CMD_APP2DEV_FIXRATE_REQ:
+	case IWL_TM_CMD_APP2DEV_LOAD_WOWLAN_FW:
+	case IWL_TM_CMD_APP2DEV_GET_FW_INFO:
+		IWL_DEBUG_INFO(priv, "testmode cmd to driver\n");
+		result = iwl_testmode_driver(hw, tb);
+		break;
+
+	case IWL_TM_CMD_APP2DEV_OWNERSHIP:
+		IWL_DEBUG_INFO(priv, "testmode change uCode ownership\n");
+		result = iwl_testmode_ownership(hw, tb);
+		break;
+
+	default:
+		IWL_ERR(priv, "Unknown testmode command\n");
+		result = -ENOSYS;
+		break;
+	}
+	mutex_unlock(&priv->mutex);
+
+	if (result)
+		IWL_ERR(priv, "Test cmd failed result=%d\n", result);
+	return result;
+}
+
+int iwlagn_mac_testmode_dump(struct ieee80211_hw *hw, struct sk_buff *skb,
+		      struct netlink_callback *cb,
+		      void *data, int len)
+{
+	struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+	int result;
+	u32 cmd;
+
+	if (cb->args[3]) {
+		/* offset by 1 since commands start at 0 */
+		cmd = cb->args[3] - 1;
+	} else {
+		struct nlattr *tb[IWL_TM_ATTR_MAX];
+
+		result = iwl_test_parse(&priv->tst, tb, data, len);
+		if (result)
+			return result;
+
+		cmd = nla_get_u32(tb[IWL_TM_ATTR_COMMAND]);
+		cb->args[3] = cmd + 1;
+	}
+
+	/* in case multiple accesses to the device happens */
+	mutex_lock(&priv->mutex);
+	result = iwl_test_dump(&priv->tst, cmd, skb, cb);
+	mutex_unlock(&priv->mutex);
+	return result;
+}
diff --git a/drivers/net/wireless/iwlwifi/dvm/tt.c b/drivers/net/wireless/iwlwifi/dvm/tt.c
new file mode 100644
index 00000000000..eb864433e59
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/tt.c
@@ -0,0 +1,693 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are derived from the ipw3945 project, as well
+ * as portions of the ieee80211 subsystem header files.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *****************************************************************************/
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <net/mac80211.h>
+#include "iwl-io.h"
+#include "iwl-modparams.h"
+#include "iwl-debug.h"
+#include "agn.h"
+#include "dev.h"
+#include "commands.h"
+#include "tt.h"
+
+/* default Thermal Throttling transaction table
+ * Current state   |         Throttling Down               |  Throttling Up
+ *=============================================================================
+ *                 Condition Nxt State  Condition Nxt State Condition Nxt State
+ *-----------------------------------------------------------------------------
+ *     IWL_TI_0     T >= 114   CT_KILL  114>T>=105   TI_1      N/A      N/A
+ *     IWL_TI_1     T >= 114   CT_KILL  114>T>=110   TI_2     T<=95     TI_0
+ *     IWL_TI_2     T >= 114   CT_KILL                        T<=100    TI_1
+ *    IWL_CT_KILL      N/A       N/A       N/A        N/A     T<=95     TI_0
+ *=============================================================================
+ */
+static const struct iwl_tt_trans tt_range_0[IWL_TI_STATE_MAX - 1] = {
+	{IWL_TI_0, IWL_ABSOLUTE_ZERO, 104},
+	{IWL_TI_1, 105, CT_KILL_THRESHOLD - 1},
+	{IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX}
+};
+static const struct iwl_tt_trans tt_range_1[IWL_TI_STATE_MAX - 1] = {
+	{IWL_TI_0, IWL_ABSOLUTE_ZERO, 95},
+	{IWL_TI_2, 110, CT_KILL_THRESHOLD - 1},
+	{IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX}
+};
+static const struct iwl_tt_trans tt_range_2[IWL_TI_STATE_MAX - 1] = {
+	{IWL_TI_1, IWL_ABSOLUTE_ZERO, 100},
+	{IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX},
+	{IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX}
+};
+static const struct iwl_tt_trans tt_range_3[IWL_TI_STATE_MAX - 1] = {
+	{IWL_TI_0, IWL_ABSOLUTE_ZERO, CT_KILL_EXIT_THRESHOLD},
+	{IWL_TI_CT_KILL, CT_KILL_EXIT_THRESHOLD + 1, IWL_ABSOLUTE_MAX},
+	{IWL_TI_CT_KILL, CT_KILL_EXIT_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
+};
+
+/* Advance Thermal Throttling default restriction table */
+static const struct iwl_tt_restriction restriction_range[IWL_TI_STATE_MAX] = {
+	{IWL_ANT_OK_MULTI, IWL_ANT_OK_MULTI, true },
+	{IWL_ANT_OK_SINGLE, IWL_ANT_OK_MULTI, true },
+	{IWL_ANT_OK_SINGLE, IWL_ANT_OK_SINGLE, false },
+	{IWL_ANT_OK_NONE, IWL_ANT_OK_NONE, false }
+};
+
+bool iwl_tt_is_low_power_state(struct iwl_priv *priv)
+{
+	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+
+	if (tt->state >= IWL_TI_1)
+		return true;
+	return false;
+}
+
+u8 iwl_tt_current_power_mode(struct iwl_priv *priv)
+{
+	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+
+	return tt->tt_power_mode;
+}
+
+bool iwl_ht_enabled(struct iwl_priv *priv)
+{
+	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+	struct iwl_tt_restriction *restriction;
+
+	if (!priv->thermal_throttle.advanced_tt)
+		return true;
+	restriction = tt->restriction + tt->state;
+	return restriction->is_ht;
+}
+
+static bool iwl_within_ct_kill_margin(struct iwl_priv *priv)
+{
+	s32 temp = priv->temperature; /* degrees CELSIUS except specified */
+	bool within_margin = false;
+
+	if (!priv->thermal_throttle.advanced_tt)
+		within_margin = ((temp + IWL_TT_CT_KILL_MARGIN) >=
+				CT_KILL_THRESHOLD_LEGACY) ? true : false;
+	else
+		within_margin = ((temp + IWL_TT_CT_KILL_MARGIN) >=
+				CT_KILL_THRESHOLD) ? true : false;
+	return within_margin;
+}
+
+bool iwl_check_for_ct_kill(struct iwl_priv *priv)
+{
+	bool is_ct_kill = false;
+
+	if (iwl_within_ct_kill_margin(priv)) {
+		iwl_tt_enter_ct_kill(priv);
+		is_ct_kill = true;
+	}
+	return is_ct_kill;
+}
+
+enum iwl_antenna_ok iwl_tx_ant_restriction(struct iwl_priv *priv)
+{
+	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+	struct iwl_tt_restriction *restriction;
+
+	if (!priv->thermal_throttle.advanced_tt)
+		return IWL_ANT_OK_MULTI;
+	restriction = tt->restriction + tt->state;
+	return restriction->tx_stream;
+}
+
+enum iwl_antenna_ok iwl_rx_ant_restriction(struct iwl_priv *priv)
+{
+	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+	struct iwl_tt_restriction *restriction;
+
+	if (!priv->thermal_throttle.advanced_tt)
+		return IWL_ANT_OK_MULTI;
+	restriction = tt->restriction + tt->state;
+	return restriction->rx_stream;
+}
+
+#define CT_KILL_EXIT_DURATION (5)	/* 5 seconds duration */
+#define CT_KILL_WAITING_DURATION (300)	/* 300ms duration */
+
+/*
+ * toggle the bit to wake up uCode and check the temperature
+ * if the temperature is below CT, uCode will stay awake and send card
+ * state notification with CT_KILL bit clear to inform Thermal Throttling
+ * Management to change state. Otherwise, uCode will go back to sleep
+ * without doing anything, driver should continue the 5 seconds timer
+ * to wake up uCode for temperature check until temperature drop below CT
+ */
+static void iwl_tt_check_exit_ct_kill(unsigned long data)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)data;
+	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+	unsigned long flags;
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	if (tt->state == IWL_TI_CT_KILL) {
+		if (priv->thermal_throttle.ct_kill_toggle) {
+			iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_CLR,
+				    CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
+			priv->thermal_throttle.ct_kill_toggle = false;
+		} else {
+			iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_SET,
+				    CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
+			priv->thermal_throttle.ct_kill_toggle = true;
+		}
+		iwl_read32(priv->trans, CSR_UCODE_DRV_GP1);
+		spin_lock_irqsave(&priv->trans->reg_lock, flags);
+		if (likely(iwl_grab_nic_access(priv->trans)))
+			iwl_release_nic_access(priv->trans);
+		spin_unlock_irqrestore(&priv->trans->reg_lock, flags);
+
+		/* Reschedule the ct_kill timer to occur in
+		 * CT_KILL_EXIT_DURATION seconds to ensure we get a
+		 * thermal update */
+		IWL_DEBUG_TEMP(priv, "schedule ct_kill exit timer\n");
+		mod_timer(&priv->thermal_throttle.ct_kill_exit_tm,
+			  jiffies + CT_KILL_EXIT_DURATION * HZ);
+	}
+}
+
+static void iwl_perform_ct_kill_task(struct iwl_priv *priv,
+			   bool stop)
+{
+	if (stop) {
+		IWL_DEBUG_TEMP(priv, "Stop all queues\n");
+		if (priv->mac80211_registered)
+			ieee80211_stop_queues(priv->hw);
+		IWL_DEBUG_TEMP(priv,
+				"Schedule 5 seconds CT_KILL Timer\n");
+		mod_timer(&priv->thermal_throttle.ct_kill_exit_tm,
+			  jiffies + CT_KILL_EXIT_DURATION * HZ);
+	} else {
+		IWL_DEBUG_TEMP(priv, "Wake all queues\n");
+		if (priv->mac80211_registered)
+			ieee80211_wake_queues(priv->hw);
+	}
+}
+
+static void iwl_tt_ready_for_ct_kill(unsigned long data)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)data;
+	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	/* temperature timer expired, ready to go into CT_KILL state */
+	if (tt->state != IWL_TI_CT_KILL) {
+		IWL_DEBUG_TEMP(priv, "entering CT_KILL state when "
+				"temperature timer expired\n");
+		tt->state = IWL_TI_CT_KILL;
+		set_bit(STATUS_CT_KILL, &priv->status);
+		iwl_perform_ct_kill_task(priv, true);
+	}
+}
+
+static void iwl_prepare_ct_kill_task(struct iwl_priv *priv)
+{
+	IWL_DEBUG_TEMP(priv, "Prepare to enter IWL_TI_CT_KILL\n");
+	/* make request to retrieve statistics information */
+	iwl_send_statistics_request(priv, CMD_SYNC, false);
+	/* Reschedule the ct_kill wait timer */
+	mod_timer(&priv->thermal_throttle.ct_kill_waiting_tm,
+		 jiffies + msecs_to_jiffies(CT_KILL_WAITING_DURATION));
+}
+
+#define IWL_MINIMAL_POWER_THRESHOLD		(CT_KILL_THRESHOLD_LEGACY)
+#define IWL_REDUCED_PERFORMANCE_THRESHOLD_2	(100)
+#define IWL_REDUCED_PERFORMANCE_THRESHOLD_1	(90)
+
+/*
+ * Legacy thermal throttling
+ * 1) Avoid NIC destruction due to high temperatures
+ *	Chip will identify dangerously high temperatures that can
+ *	harm the device and will power down
+ * 2) Avoid the NIC power down due to high temperature
+ *	Throttle early enough to lower the power consumption before
+ *	drastic steps are needed
+ */
+static void iwl_legacy_tt_handler(struct iwl_priv *priv, s32 temp, bool force)
+{
+	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+	enum iwl_tt_state old_state;
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if ((tt->tt_previous_temp) &&
+	    (temp > tt->tt_previous_temp) &&
+	    ((temp - tt->tt_previous_temp) >
+	    IWL_TT_INCREASE_MARGIN)) {
+		IWL_DEBUG_TEMP(priv,
+			"Temperature increase %d degree Celsius\n",
+			(temp - tt->tt_previous_temp));
+	}
+#endif
+	old_state = tt->state;
+	/* in Celsius */
+	if (temp >= IWL_MINIMAL_POWER_THRESHOLD)
+		tt->state = IWL_TI_CT_KILL;
+	else if (temp >= IWL_REDUCED_PERFORMANCE_THRESHOLD_2)
+		tt->state = IWL_TI_2;
+	else if (temp >= IWL_REDUCED_PERFORMANCE_THRESHOLD_1)
+		tt->state = IWL_TI_1;
+	else
+		tt->state = IWL_TI_0;
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	tt->tt_previous_temp = temp;
+#endif
+	/* stop ct_kill_waiting_tm timer */
+	del_timer_sync(&priv->thermal_throttle.ct_kill_waiting_tm);
+	if (tt->state != old_state) {
+		switch (tt->state) {
+		case IWL_TI_0:
+			/*
+			 * When the system is ready to go back to IWL_TI_0
+			 * we only have to call iwl_power_update_mode() to
+			 * do so.
+			 */
+			break;
+		case IWL_TI_1:
+			tt->tt_power_mode = IWL_POWER_INDEX_3;
+			break;
+		case IWL_TI_2:
+			tt->tt_power_mode = IWL_POWER_INDEX_4;
+			break;
+		default:
+			tt->tt_power_mode = IWL_POWER_INDEX_5;
+			break;
+		}
+		mutex_lock(&priv->mutex);
+		if (old_state == IWL_TI_CT_KILL)
+			clear_bit(STATUS_CT_KILL, &priv->status);
+		if (tt->state != IWL_TI_CT_KILL &&
+		    iwl_power_update_mode(priv, true)) {
+			/* TT state not updated
+			 * try again during next temperature read
+			 */
+			if (old_state == IWL_TI_CT_KILL)
+				set_bit(STATUS_CT_KILL, &priv->status);
+			tt->state = old_state;
+			IWL_ERR(priv, "Cannot update power mode, "
+					"TT state not updated\n");
+		} else {
+			if (tt->state == IWL_TI_CT_KILL) {
+				if (force) {
+					set_bit(STATUS_CT_KILL, &priv->status);
+					iwl_perform_ct_kill_task(priv, true);
+				} else {
+					iwl_prepare_ct_kill_task(priv);
+					tt->state = old_state;
+				}
+			} else if (old_state == IWL_TI_CT_KILL &&
+				 tt->state != IWL_TI_CT_KILL)
+				iwl_perform_ct_kill_task(priv, false);
+			IWL_DEBUG_TEMP(priv, "Temperature state changed %u\n",
+					tt->state);
+			IWL_DEBUG_TEMP(priv, "Power Index change to %u\n",
+					tt->tt_power_mode);
+		}
+		mutex_unlock(&priv->mutex);
+	}
+}
+
+/*
+ * Advance thermal throttling
+ * 1) Avoid NIC destruction due to high temperatures
+ *	Chip will identify dangerously high temperatures that can
+ *	harm the device and will power down
+ * 2) Avoid the NIC power down due to high temperature
+ *	Throttle early enough to lower the power consumption before
+ *	drastic steps are needed
+ *	Actions include relaxing the power down sleep thresholds and
+ *	decreasing the number of TX streams
+ * 3) Avoid throughput performance impact as much as possible
+ *
+ *=============================================================================
+ *                 Condition Nxt State  Condition Nxt State Condition Nxt State
+ *-----------------------------------------------------------------------------
+ *     IWL_TI_0     T >= 114   CT_KILL  114>T>=105   TI_1      N/A      N/A
+ *     IWL_TI_1     T >= 114   CT_KILL  114>T>=110   TI_2     T<=95     TI_0
+ *     IWL_TI_2     T >= 114   CT_KILL                        T<=100    TI_1
+ *    IWL_CT_KILL      N/A       N/A       N/A        N/A     T<=95     TI_0
+ *=============================================================================
+ */
+static void iwl_advance_tt_handler(struct iwl_priv *priv, s32 temp, bool force)
+{
+	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+	int i;
+	bool changed = false;
+	enum iwl_tt_state old_state;
+	struct iwl_tt_trans *transaction;
+
+	old_state = tt->state;
+	for (i = 0; i < IWL_TI_STATE_MAX - 1; i++) {
+		/* based on the current TT state,
+		 * find the curresponding transaction table
+		 * each table has (IWL_TI_STATE_MAX - 1) entries
+		 * tt->transaction + ((old_state * (IWL_TI_STATE_MAX - 1))
+		 * will advance to the correct table.
+		 * then based on the current temperature
+		 * find the next state need to transaction to
+		 * go through all the possible (IWL_TI_STATE_MAX - 1) entries
+		 * in the current table to see if transaction is needed
+		 */
+		transaction = tt->transaction +
+			((old_state * (IWL_TI_STATE_MAX - 1)) + i);
+		if (temp >= transaction->tt_low &&
+		    temp <= transaction->tt_high) {
+#ifdef CONFIG_IWLWIFI_DEBUG
+			if ((tt->tt_previous_temp) &&
+			    (temp > tt->tt_previous_temp) &&
+			    ((temp - tt->tt_previous_temp) >
+			    IWL_TT_INCREASE_MARGIN)) {
+				IWL_DEBUG_TEMP(priv,
+					"Temperature increase %d "
+					"degree Celsius\n",
+					(temp - tt->tt_previous_temp));
+			}
+			tt->tt_previous_temp = temp;
+#endif
+			if (old_state !=
+			    transaction->next_state) {
+				changed = true;
+				tt->state =
+					transaction->next_state;
+			}
+			break;
+		}
+	}
+	/* stop ct_kill_waiting_tm timer */
+	del_timer_sync(&priv->thermal_throttle.ct_kill_waiting_tm);
+	if (changed) {
+		if (tt->state >= IWL_TI_1) {
+			/* force PI = IWL_POWER_INDEX_5 in the case of TI > 0 */
+			tt->tt_power_mode = IWL_POWER_INDEX_5;
+
+			if (!iwl_ht_enabled(priv)) {
+				struct iwl_rxon_context *ctx;
+
+				for_each_context(priv, ctx) {
+					struct iwl_rxon_cmd *rxon;
+
+					rxon = &ctx->staging;
+
+					/* disable HT */
+					rxon->flags &= ~(
+						RXON_FLG_CHANNEL_MODE_MSK |
+						RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK |
+						RXON_FLG_HT40_PROT_MSK |
+						RXON_FLG_HT_PROT_MSK);
+				}
+			} else {
+				/* check HT capability and set
+				 * according to the system HT capability
+				 * in case get disabled before */
+				iwl_set_rxon_ht(priv, &priv->current_ht_config);
+			}
+
+		} else {
+			/*
+			 * restore system power setting -- it will be
+			 * recalculated automatically.
+			 */
+
+			/* check HT capability and set
+			 * according to the system HT capability
+			 * in case get disabled before */
+			iwl_set_rxon_ht(priv, &priv->current_ht_config);
+		}
+		mutex_lock(&priv->mutex);
+		if (old_state == IWL_TI_CT_KILL)
+			clear_bit(STATUS_CT_KILL, &priv->status);
+		if (tt->state != IWL_TI_CT_KILL &&
+		    iwl_power_update_mode(priv, true)) {
+			/* TT state not updated
+			 * try again during next temperature read
+			 */
+			IWL_ERR(priv, "Cannot update power mode, "
+					"TT state not updated\n");
+			if (old_state == IWL_TI_CT_KILL)
+				set_bit(STATUS_CT_KILL, &priv->status);
+			tt->state = old_state;
+		} else {
+			IWL_DEBUG_TEMP(priv,
+					"Thermal Throttling to new state: %u\n",
+					tt->state);
+			if (old_state != IWL_TI_CT_KILL &&
+			    tt->state == IWL_TI_CT_KILL) {
+				if (force) {
+					IWL_DEBUG_TEMP(priv,
+						"Enter IWL_TI_CT_KILL\n");
+					set_bit(STATUS_CT_KILL, &priv->status);
+					iwl_perform_ct_kill_task(priv, true);
+				} else {
+					iwl_prepare_ct_kill_task(priv);
+					tt->state = old_state;
+				}
+			} else if (old_state == IWL_TI_CT_KILL &&
+				  tt->state != IWL_TI_CT_KILL) {
+				IWL_DEBUG_TEMP(priv, "Exit IWL_TI_CT_KILL\n");
+				iwl_perform_ct_kill_task(priv, false);
+			}
+		}
+		mutex_unlock(&priv->mutex);
+	}
+}
+
+/* Card State Notification indicated reach critical temperature
+ * if PSP not enable, no Thermal Throttling function will be performed
+ * just set the GP1 bit to acknowledge the event
+ * otherwise, go into IWL_TI_CT_KILL state
+ * since Card State Notification will not provide any temperature reading
+ * for Legacy mode
+ * so just pass the CT_KILL temperature to iwl_legacy_tt_handler()
+ * for advance mode
+ * pass CT_KILL_THRESHOLD+1 to make sure move into IWL_TI_CT_KILL state
+ */
+static void iwl_bg_ct_enter(struct work_struct *work)
+{
+	struct iwl_priv *priv = container_of(work, struct iwl_priv, ct_enter);
+	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	if (!iwl_is_ready(priv))
+		return;
+
+	if (tt->state != IWL_TI_CT_KILL) {
+		IWL_ERR(priv, "Device reached critical temperature "
+			      "- ucode going to sleep!\n");
+		if (!priv->thermal_throttle.advanced_tt)
+			iwl_legacy_tt_handler(priv,
+					      IWL_MINIMAL_POWER_THRESHOLD,
+					      true);
+		else
+			iwl_advance_tt_handler(priv,
+					       CT_KILL_THRESHOLD + 1, true);
+	}
+}
+
+/* Card State Notification indicated out of critical temperature
+ * since Card State Notification will not provide any temperature reading
+ * so pass the IWL_REDUCED_PERFORMANCE_THRESHOLD_2 temperature
+ * to iwl_legacy_tt_handler() to get out of IWL_CT_KILL state
+ */
+static void iwl_bg_ct_exit(struct work_struct *work)
+{
+	struct iwl_priv *priv = container_of(work, struct iwl_priv, ct_exit);
+	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	if (!iwl_is_ready(priv))
+		return;
+
+	/* stop ct_kill_exit_tm timer */
+	del_timer_sync(&priv->thermal_throttle.ct_kill_exit_tm);
+
+	if (tt->state == IWL_TI_CT_KILL) {
+		IWL_ERR(priv,
+			"Device temperature below critical"
+			"- ucode awake!\n");
+		/*
+		 * exit from CT_KILL state
+		 * reset the current temperature reading
+		 */
+		priv->temperature = 0;
+		if (!priv->thermal_throttle.advanced_tt)
+			iwl_legacy_tt_handler(priv,
+				      IWL_REDUCED_PERFORMANCE_THRESHOLD_2,
+				      true);
+		else
+			iwl_advance_tt_handler(priv, CT_KILL_EXIT_THRESHOLD,
+					       true);
+	}
+}
+
+void iwl_tt_enter_ct_kill(struct iwl_priv *priv)
+{
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	IWL_DEBUG_TEMP(priv, "Queueing critical temperature enter.\n");
+	queue_work(priv->workqueue, &priv->ct_enter);
+}
+
+void iwl_tt_exit_ct_kill(struct iwl_priv *priv)
+{
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	IWL_DEBUG_TEMP(priv, "Queueing critical temperature exit.\n");
+	queue_work(priv->workqueue, &priv->ct_exit);
+}
+
+static void iwl_bg_tt_work(struct work_struct *work)
+{
+	struct iwl_priv *priv = container_of(work, struct iwl_priv, tt_work);
+	s32 temp = priv->temperature; /* degrees CELSIUS except specified */
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	if (!priv->thermal_throttle.advanced_tt)
+		iwl_legacy_tt_handler(priv, temp, false);
+	else
+		iwl_advance_tt_handler(priv, temp, false);
+}
+
+void iwl_tt_handler(struct iwl_priv *priv)
+{
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	IWL_DEBUG_TEMP(priv, "Queueing thermal throttling work.\n");
+	queue_work(priv->workqueue, &priv->tt_work);
+}
+
+/* Thermal throttling initialization
+ * For advance thermal throttling:
+ *     Initialize Thermal Index and temperature threshold table
+ *     Initialize thermal throttling restriction table
+ */
+void iwl_tt_initialize(struct iwl_priv *priv)
+{
+	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+	int size = sizeof(struct iwl_tt_trans) * (IWL_TI_STATE_MAX - 1);
+	struct iwl_tt_trans *transaction;
+
+	IWL_DEBUG_TEMP(priv, "Initialize Thermal Throttling\n");
+
+	memset(tt, 0, sizeof(struct iwl_tt_mgmt));
+
+	tt->state = IWL_TI_0;
+	init_timer(&priv->thermal_throttle.ct_kill_exit_tm);
+	priv->thermal_throttle.ct_kill_exit_tm.data = (unsigned long)priv;
+	priv->thermal_throttle.ct_kill_exit_tm.function =
+		iwl_tt_check_exit_ct_kill;
+	init_timer(&priv->thermal_throttle.ct_kill_waiting_tm);
+	priv->thermal_throttle.ct_kill_waiting_tm.data =
+		(unsigned long)priv;
+	priv->thermal_throttle.ct_kill_waiting_tm.function =
+		iwl_tt_ready_for_ct_kill;
+	/* setup deferred ct kill work */
+	INIT_WORK(&priv->tt_work, iwl_bg_tt_work);
+	INIT_WORK(&priv->ct_enter, iwl_bg_ct_enter);
+	INIT_WORK(&priv->ct_exit, iwl_bg_ct_exit);
+
+	if (priv->cfg->base_params->adv_thermal_throttle) {
+		IWL_DEBUG_TEMP(priv, "Advanced Thermal Throttling\n");
+		tt->restriction = kcalloc(IWL_TI_STATE_MAX,
+					  sizeof(struct iwl_tt_restriction),
+					  GFP_KERNEL);
+		tt->transaction = kcalloc(IWL_TI_STATE_MAX *
+					  (IWL_TI_STATE_MAX - 1),
+					  sizeof(struct iwl_tt_trans),
+					  GFP_KERNEL);
+		if (!tt->restriction || !tt->transaction) {
+			IWL_ERR(priv, "Fallback to Legacy Throttling\n");
+			priv->thermal_throttle.advanced_tt = false;
+			kfree(tt->restriction);
+			tt->restriction = NULL;
+			kfree(tt->transaction);
+			tt->transaction = NULL;
+		} else {
+			transaction = tt->transaction +
+				(IWL_TI_0 * (IWL_TI_STATE_MAX - 1));
+			memcpy(transaction, &tt_range_0[0], size);
+			transaction = tt->transaction +
+				(IWL_TI_1 * (IWL_TI_STATE_MAX - 1));
+			memcpy(transaction, &tt_range_1[0], size);
+			transaction = tt->transaction +
+				(IWL_TI_2 * (IWL_TI_STATE_MAX - 1));
+			memcpy(transaction, &tt_range_2[0], size);
+			transaction = tt->transaction +
+				(IWL_TI_CT_KILL * (IWL_TI_STATE_MAX - 1));
+			memcpy(transaction, &tt_range_3[0], size);
+			size = sizeof(struct iwl_tt_restriction) *
+				IWL_TI_STATE_MAX;
+			memcpy(tt->restriction,
+				&restriction_range[0], size);
+			priv->thermal_throttle.advanced_tt = true;
+		}
+	} else {
+		IWL_DEBUG_TEMP(priv, "Legacy Thermal Throttling\n");
+		priv->thermal_throttle.advanced_tt = false;
+	}
+}
+
+/* cleanup thermal throttling management related memory and timer */
+void iwl_tt_exit(struct iwl_priv *priv)
+{
+	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+
+	/* stop ct_kill_exit_tm timer if activated */
+	del_timer_sync(&priv->thermal_throttle.ct_kill_exit_tm);
+	/* stop ct_kill_waiting_tm timer if activated */
+	del_timer_sync(&priv->thermal_throttle.ct_kill_waiting_tm);
+	cancel_work_sync(&priv->tt_work);
+	cancel_work_sync(&priv->ct_enter);
+	cancel_work_sync(&priv->ct_exit);
+
+	if (priv->thermal_throttle.advanced_tt) {
+		/* free advance thermal throttling memory */
+		kfree(tt->restriction);
+		tt->restriction = NULL;
+		kfree(tt->transaction);
+		tt->transaction = NULL;
+	}
+}
diff --git a/drivers/net/wireless/iwlwifi/dvm/tt.h b/drivers/net/wireless/iwlwifi/dvm/tt.h
new file mode 100644
index 00000000000..44c7c8f30a2
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/tt.h
@@ -0,0 +1,128 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are derived from the ipw3945 project, as well
+ * as portions of the ieee80211 subsystem header files.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *****************************************************************************/
+#ifndef __iwl_tt_setting_h__
+#define __iwl_tt_setting_h__
+
+#include "commands.h"
+
+#define IWL_ABSOLUTE_ZERO		0
+#define IWL_ABSOLUTE_MAX		0xFFFFFFFF
+#define IWL_TT_INCREASE_MARGIN	5
+#define IWL_TT_CT_KILL_MARGIN	3
+
+enum iwl_antenna_ok {
+	IWL_ANT_OK_NONE,
+	IWL_ANT_OK_SINGLE,
+	IWL_ANT_OK_MULTI,
+};
+
+/* Thermal Throttling State Machine states */
+enum  iwl_tt_state {
+	IWL_TI_0,	/* normal temperature, system power state */
+	IWL_TI_1,	/* high temperature detect, low power state */
+	IWL_TI_2,	/* higher temperature detected, lower power state */
+	IWL_TI_CT_KILL, /* critical temperature detected, lowest power state */
+	IWL_TI_STATE_MAX
+};
+
+/**
+ * struct iwl_tt_restriction - Thermal Throttling restriction table
+ * @tx_stream: number of tx stream allowed
+ * @is_ht: ht enable/disable
+ * @rx_stream: number of rx stream allowed
+ *
+ * This table is used by advance thermal throttling management
+ * based on the current thermal throttling state, and determines
+ * the number of tx/rx streams and the status of HT operation.
+ */
+struct iwl_tt_restriction {
+	enum iwl_antenna_ok tx_stream;
+	enum iwl_antenna_ok rx_stream;
+	bool is_ht;
+};
+
+/**
+ * struct iwl_tt_trans - Thermal Throttling transaction table
+ * @next_state:  next thermal throttling mode
+ * @tt_low: low temperature threshold to change state
+ * @tt_high: high temperature threshold to change state
+ *
+ * This is used by the advanced thermal throttling algorithm
+ * to determine the next thermal state to go based on the
+ * current temperature.
+ */
+struct iwl_tt_trans {
+	enum iwl_tt_state next_state;
+	u32 tt_low;
+	u32 tt_high;
+};
+
+/**
+ * struct iwl_tt_mgnt - Thermal Throttling Management structure
+ * @advanced_tt:    advanced thermal throttle required
+ * @state:          current Thermal Throttling state
+ * @tt_power_mode:  Thermal Throttling power mode index
+ *		    being used to set power level when
+ *		    when thermal throttling state != IWL_TI_0
+ *		    the tt_power_mode should set to different
+ *		    power mode based on the current tt state
+ * @tt_previous_temperature: last measured temperature
+ * @iwl_tt_restriction: ptr to restriction tbl, used by advance
+ *		    thermal throttling to determine how many tx/rx streams
+ *		    should be used in tt state; and can HT be enabled or not
+ * @iwl_tt_trans: ptr to adv trans table, used by advance thermal throttling
+ *		    state transaction
+ * @ct_kill_toggle: used to toggle the CSR bit when checking uCode temperature
+ * @ct_kill_exit_tm: timer to exit thermal kill
+ */
+struct iwl_tt_mgmt {
+	enum iwl_tt_state state;
+	bool advanced_tt;
+	u8 tt_power_mode;
+	bool ct_kill_toggle;
+#ifdef CONFIG_IWLWIFI_DEBUG
+	s32 tt_previous_temp;
+#endif
+	struct iwl_tt_restriction *restriction;
+	struct iwl_tt_trans *transaction;
+	struct timer_list ct_kill_exit_tm;
+	struct timer_list ct_kill_waiting_tm;
+};
+
+u8 iwl_tt_current_power_mode(struct iwl_priv *priv);
+bool iwl_tt_is_low_power_state(struct iwl_priv *priv);
+bool iwl_ht_enabled(struct iwl_priv *priv);
+enum iwl_antenna_ok iwl_tx_ant_restriction(struct iwl_priv *priv);
+enum iwl_antenna_ok iwl_rx_ant_restriction(struct iwl_priv *priv);
+void iwl_tt_enter_ct_kill(struct iwl_priv *priv);
+void iwl_tt_exit_ct_kill(struct iwl_priv *priv);
+void iwl_tt_handler(struct iwl_priv *priv);
+void iwl_tt_initialize(struct iwl_priv *priv);
+void iwl_tt_exit(struct iwl_priv *priv);
+
+#endif  /* __iwl_tt_setting_h__ */
diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c
new file mode 100644
index 00000000000..5971a23aa47
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/tx.c
@@ -0,0 +1,1388 @@
+/******************************************************************************
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ieee80211.h>
+#include "iwl-io.h"
+#include "iwl-trans.h"
+#include "iwl-agn-hw.h"
+#include "dev.h"
+#include "agn.h"
+
+static const u8 tid_to_ac[] = {
+	IEEE80211_AC_BE,
+	IEEE80211_AC_BK,
+	IEEE80211_AC_BK,
+	IEEE80211_AC_BE,
+	IEEE80211_AC_VI,
+	IEEE80211_AC_VI,
+	IEEE80211_AC_VO,
+	IEEE80211_AC_VO,
+};
+
+static void iwlagn_tx_cmd_protection(struct iwl_priv *priv,
+				     struct ieee80211_tx_info *info,
+				     __le16 fc, __le32 *tx_flags)
+{
+	if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS ||
+	    info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT ||
+	    info->flags & IEEE80211_TX_CTL_AMPDU)
+		*tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK;
+}
+
+/*
+ * handle build REPLY_TX command notification.
+ */
+static void iwlagn_tx_cmd_build_basic(struct iwl_priv *priv,
+				      struct sk_buff *skb,
+				      struct iwl_tx_cmd *tx_cmd,
+				      struct ieee80211_tx_info *info,
+				      struct ieee80211_hdr *hdr, u8 sta_id)
+{
+	__le16 fc = hdr->frame_control;
+	__le32 tx_flags = tx_cmd->tx_flags;
+
+	tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+
+	if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
+		tx_flags |= TX_CMD_FLG_ACK_MSK;
+	else
+		tx_flags &= ~TX_CMD_FLG_ACK_MSK;
+
+	if (ieee80211_is_probe_resp(fc))
+		tx_flags |= TX_CMD_FLG_TSF_MSK;
+	else if (ieee80211_is_back_req(fc))
+		tx_flags |= TX_CMD_FLG_ACK_MSK | TX_CMD_FLG_IMM_BA_RSP_MASK;
+	else if (info->band == IEEE80211_BAND_2GHZ &&
+		 priv->cfg->bt_params &&
+		 priv->cfg->bt_params->advanced_bt_coexist &&
+		 (ieee80211_is_auth(fc) || ieee80211_is_assoc_req(fc) ||
+		 ieee80211_is_reassoc_req(fc) ||
+		 skb->protocol == cpu_to_be16(ETH_P_PAE)))
+		tx_flags |= TX_CMD_FLG_IGNORE_BT;
+
+
+	tx_cmd->sta_id = sta_id;
+	if (ieee80211_has_morefrags(fc))
+		tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
+
+	if (ieee80211_is_data_qos(fc)) {
+		u8 *qc = ieee80211_get_qos_ctl(hdr);
+		tx_cmd->tid_tspec = qc[0] & 0xf;
+		tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
+	} else {
+		tx_cmd->tid_tspec = IWL_TID_NON_QOS;
+		if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ)
+			tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
+		else
+			tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
+	}
+
+	iwlagn_tx_cmd_protection(priv, info, fc, &tx_flags);
+
+	tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
+	if (ieee80211_is_mgmt(fc)) {
+		if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
+			tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3);
+		else
+			tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2);
+	} else {
+		tx_cmd->timeout.pm_frame_timeout = 0;
+	}
+
+	tx_cmd->driver_txop = 0;
+	tx_cmd->tx_flags = tx_flags;
+	tx_cmd->next_frame_len = 0;
+}
+
+static void iwlagn_tx_cmd_build_rate(struct iwl_priv *priv,
+				     struct iwl_tx_cmd *tx_cmd,
+				     struct ieee80211_tx_info *info,
+				     __le16 fc)
+{
+	u32 rate_flags;
+	int rate_idx;
+	u8 rts_retry_limit;
+	u8 data_retry_limit;
+	u8 rate_plcp;
+
+	if (priv->wowlan) {
+		rts_retry_limit = IWLAGN_LOW_RETRY_LIMIT;
+		data_retry_limit = IWLAGN_LOW_RETRY_LIMIT;
+	} else {
+		/* Set retry limit on RTS packets */
+		rts_retry_limit = IWLAGN_RTS_DFAULT_RETRY_LIMIT;
+
+		/* Set retry limit on DATA packets and Probe Responses*/
+		if (ieee80211_is_probe_resp(fc)) {
+			data_retry_limit = IWLAGN_MGMT_DFAULT_RETRY_LIMIT;
+			rts_retry_limit =
+				min(data_retry_limit, rts_retry_limit);
+		} else if (ieee80211_is_back_req(fc))
+			data_retry_limit = IWLAGN_BAR_DFAULT_RETRY_LIMIT;
+		else
+			data_retry_limit = IWLAGN_DEFAULT_TX_RETRY;
+	}
+
+	tx_cmd->data_retry_limit = data_retry_limit;
+	tx_cmd->rts_retry_limit = rts_retry_limit;
+
+	/* DATA packets will use the uCode station table for rate/antenna
+	 * selection */
+	if (ieee80211_is_data(fc)) {
+		tx_cmd->initial_rate_index = 0;
+		tx_cmd->tx_flags |= TX_CMD_FLG_STA_RATE_MSK;
+#ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
+		if (priv->tm_fixed_rate) {
+			/*
+			 * rate overwrite by testmode
+			 * we not only send lq command to change rate
+			 * we also re-enforce per data pkt base.
+			 */
+			tx_cmd->tx_flags &= ~TX_CMD_FLG_STA_RATE_MSK;
+			memcpy(&tx_cmd->rate_n_flags, &priv->tm_fixed_rate,
+			       sizeof(tx_cmd->rate_n_flags));
+		}
+#endif
+		return;
+	} else if (ieee80211_is_back_req(fc))
+		tx_cmd->tx_flags |= TX_CMD_FLG_STA_RATE_MSK;
+
+	/**
+	 * If the current TX rate stored in mac80211 has the MCS bit set, it's
+	 * not really a TX rate.  Thus, we use the lowest supported rate for
+	 * this band.  Also use the lowest supported rate if the stored rate
+	 * index is invalid.
+	 */
+	rate_idx = info->control.rates[0].idx;
+	if (info->control.rates[0].flags & IEEE80211_TX_RC_MCS ||
+			(rate_idx < 0) || (rate_idx > IWL_RATE_COUNT_LEGACY))
+		rate_idx = rate_lowest_index(
+				&priv->eeprom_data->bands[info->band],
+				info->control.sta);
+	/* For 5 GHZ band, remap mac80211 rate indices into driver indices */
+	if (info->band == IEEE80211_BAND_5GHZ)
+		rate_idx += IWL_FIRST_OFDM_RATE;
+	/* Get PLCP rate for tx_cmd->rate_n_flags */
+	rate_plcp = iwl_rates[rate_idx].plcp;
+	/* Zero out flags for this packet */
+	rate_flags = 0;
+
+	/* Set CCK flag as needed */
+	if ((rate_idx >= IWL_FIRST_CCK_RATE) && (rate_idx <= IWL_LAST_CCK_RATE))
+		rate_flags |= RATE_MCS_CCK_MSK;
+
+	/* Set up antennas */
+	 if (priv->cfg->bt_params &&
+	     priv->cfg->bt_params->advanced_bt_coexist &&
+	     priv->bt_full_concurrent) {
+		/* operated as 1x1 in full concurrency mode */
+		priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant,
+				first_antenna(priv->eeprom_data->valid_tx_ant));
+	} else
+		priv->mgmt_tx_ant = iwl_toggle_tx_ant(
+					priv, priv->mgmt_tx_ant,
+					priv->eeprom_data->valid_tx_ant);
+	rate_flags |= iwl_ant_idx_to_flags(priv->mgmt_tx_ant);
+
+	/* Set the rate in the TX cmd */
+	tx_cmd->rate_n_flags = iwl_hw_set_rate_n_flags(rate_plcp, rate_flags);
+}
+
+static void iwlagn_tx_cmd_build_hwcrypto(struct iwl_priv *priv,
+					 struct ieee80211_tx_info *info,
+					 struct iwl_tx_cmd *tx_cmd,
+					 struct sk_buff *skb_frag)
+{
+	struct ieee80211_key_conf *keyconf = info->control.hw_key;
+
+	switch (keyconf->cipher) {
+	case WLAN_CIPHER_SUITE_CCMP:
+		tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
+		memcpy(tx_cmd->key, keyconf->key, keyconf->keylen);
+		if (info->flags & IEEE80211_TX_CTL_AMPDU)
+			tx_cmd->tx_flags |= TX_CMD_FLG_AGG_CCMP_MSK;
+		IWL_DEBUG_TX(priv, "tx_cmd with AES hwcrypto\n");
+		break;
+
+	case WLAN_CIPHER_SUITE_TKIP:
+		tx_cmd->sec_ctl = TX_CMD_SEC_TKIP;
+		ieee80211_get_tkip_p2k(keyconf, skb_frag, tx_cmd->key);
+		IWL_DEBUG_TX(priv, "tx_cmd with tkip hwcrypto\n");
+		break;
+
+	case WLAN_CIPHER_SUITE_WEP104:
+		tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
+		/* fall through */
+	case WLAN_CIPHER_SUITE_WEP40:
+		tx_cmd->sec_ctl |= (TX_CMD_SEC_WEP |
+			(keyconf->keyidx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT);
+
+		memcpy(&tx_cmd->key[3], keyconf->key, keyconf->keylen);
+
+		IWL_DEBUG_TX(priv, "Configuring packet for WEP encryption "
+			     "with key %d\n", keyconf->keyidx);
+		break;
+
+	default:
+		IWL_ERR(priv, "Unknown encode cipher %x\n", keyconf->cipher);
+		break;
+	}
+}
+
+/**
+ * iwl_sta_id_or_broadcast - return sta_id or broadcast sta
+ * @context: the current context
+ * @sta: mac80211 station
+ *
+ * In certain circumstances mac80211 passes a station pointer
+ * that may be %NULL, for example during TX or key setup. In
+ * that case, we need to use the broadcast station, so this
+ * inline wraps that pattern.
+ */
+static int iwl_sta_id_or_broadcast(struct iwl_rxon_context *context,
+				   struct ieee80211_sta *sta)
+{
+	int sta_id;
+
+	if (!sta)
+		return context->bcast_sta_id;
+
+	sta_id = iwl_sta_id(sta);
+
+	/*
+	 * mac80211 should not be passing a partially
+	 * initialised station!
+	 */
+	WARN_ON(sta_id == IWL_INVALID_STATION);
+
+	return sta_id;
+}
+
+/*
+ * start REPLY_TX command process
+ */
+int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct iwl_station_priv *sta_priv = NULL;
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	struct iwl_device_cmd *dev_cmd;
+	struct iwl_tx_cmd *tx_cmd;
+	__le16 fc;
+	u8 hdr_len;
+	u16 len, seq_number = 0;
+	u8 sta_id, tid = IWL_MAX_TID_COUNT;
+	bool is_agg = false;
+	int txq_id;
+
+	if (info->control.vif)
+		ctx = iwl_rxon_ctx_from_vif(info->control.vif);
+
+	if (iwl_is_rfkill(priv)) {
+		IWL_DEBUG_DROP(priv, "Dropping - RF KILL\n");
+		goto drop_unlock_priv;
+	}
+
+	fc = hdr->frame_control;
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (ieee80211_is_auth(fc))
+		IWL_DEBUG_TX(priv, "Sending AUTH frame\n");
+	else if (ieee80211_is_assoc_req(fc))
+		IWL_DEBUG_TX(priv, "Sending ASSOC frame\n");
+	else if (ieee80211_is_reassoc_req(fc))
+		IWL_DEBUG_TX(priv, "Sending REASSOC frame\n");
+#endif
+
+	if (unlikely(ieee80211_is_probe_resp(fc))) {
+		struct iwl_wipan_noa_data *noa_data =
+			rcu_dereference(priv->noa_data);
+
+		if (noa_data &&
+		    pskb_expand_head(skb, 0, noa_data->length,
+				     GFP_ATOMIC) == 0) {
+			memcpy(skb_put(skb, noa_data->length),
+			       noa_data->data, noa_data->length);
+			hdr = (struct ieee80211_hdr *)skb->data;
+		}
+	}
+
+	hdr_len = ieee80211_hdrlen(fc);
+
+	/* For management frames use broadcast id to do not break aggregation */
+	if (!ieee80211_is_data(fc))
+		sta_id = ctx->bcast_sta_id;
+	else {
+		/* Find index into station table for destination station */
+		sta_id = iwl_sta_id_or_broadcast(ctx, info->control.sta);
+		if (sta_id == IWL_INVALID_STATION) {
+			IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
+				       hdr->addr1);
+			goto drop_unlock_priv;
+		}
+	}
+
+	IWL_DEBUG_TX(priv, "station Id %d\n", sta_id);
+
+	if (info->control.sta)
+		sta_priv = (void *)info->control.sta->drv_priv;
+
+	if (sta_priv && sta_priv->asleep &&
+	    (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER)) {
+		/*
+		 * This sends an asynchronous command to the device,
+		 * but we can rely on it being processed before the
+		 * next frame is processed -- and the next frame to
+		 * this station is the one that will consume this
+		 * counter.
+		 * For now set the counter to just 1 since we do not
+		 * support uAPSD yet.
+		 *
+		 * FIXME: If we get two non-bufferable frames one
+		 * after the other, we might only send out one of
+		 * them because this is racy.
+		 */
+		iwl_sta_modify_sleep_tx_count(priv, sta_id, 1);
+	}
+
+	if (info->flags & IEEE80211_TX_CTL_AMPDU)
+		is_agg = true;
+
+	dev_cmd = iwl_trans_alloc_tx_cmd(priv->trans);
+
+	if (unlikely(!dev_cmd))
+		goto drop_unlock_priv;
+
+	memset(dev_cmd, 0, sizeof(*dev_cmd));
+	tx_cmd = (struct iwl_tx_cmd *) dev_cmd->payload;
+
+	/* Total # bytes to be transmitted */
+	len = (u16)skb->len;
+	tx_cmd->len = cpu_to_le16(len);
+
+	if (info->control.hw_key)
+		iwlagn_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb);
+
+	/* TODO need this for burst mode later on */
+	iwlagn_tx_cmd_build_basic(priv, skb, tx_cmd, info, hdr, sta_id);
+
+	iwlagn_tx_cmd_build_rate(priv, tx_cmd, info, fc);
+
+	memset(&info->status, 0, sizeof(info->status));
+
+	info->driver_data[0] = ctx;
+	info->driver_data[1] = dev_cmd;
+	/* From now on, we cannot access info->control */
+
+	spin_lock(&priv->sta_lock);
+
+	if (ieee80211_is_data_qos(fc) && !ieee80211_is_qos_nullfunc(fc)) {
+		u8 *qc = NULL;
+		struct iwl_tid_data *tid_data;
+		qc = ieee80211_get_qos_ctl(hdr);
+		tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
+		if (WARN_ON_ONCE(tid >= IWL_MAX_TID_COUNT))
+			goto drop_unlock_sta;
+		tid_data = &priv->tid_data[sta_id][tid];
+
+		/* aggregation is on for this <sta,tid> */
+		if (info->flags & IEEE80211_TX_CTL_AMPDU &&
+		    tid_data->agg.state != IWL_AGG_ON) {
+			IWL_ERR(priv, "TX_CTL_AMPDU while not in AGG:"
+				" Tx flags = 0x%08x, agg.state = %d",
+				info->flags, tid_data->agg.state);
+			IWL_ERR(priv, "sta_id = %d, tid = %d seq_num = %d",
+				sta_id, tid, SEQ_TO_SN(tid_data->seq_number));
+			goto drop_unlock_sta;
+		}
+
+		/* We can receive packets from the stack in IWL_AGG_{ON,OFF}
+		 * only. Check this here.
+		 */
+		if (WARN_ONCE(tid_data->agg.state != IWL_AGG_ON &&
+		    tid_data->agg.state != IWL_AGG_OFF,
+		    "Tx while agg.state = %d", tid_data->agg.state))
+			goto drop_unlock_sta;
+
+		seq_number = tid_data->seq_number;
+		seq_number &= IEEE80211_SCTL_SEQ;
+		hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+		hdr->seq_ctrl |= cpu_to_le16(seq_number);
+		seq_number += 0x10;
+	}
+
+	/* Copy MAC header from skb into command buffer */
+	memcpy(tx_cmd->hdr, hdr, hdr_len);
+
+	if (is_agg)
+		txq_id = priv->tid_data[sta_id][tid].agg.txq_id;
+	else if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) {
+		/*
+		 * Send this frame after DTIM -- there's a special queue
+		 * reserved for this for contexts that support AP mode.
+		 */
+		txq_id = ctx->mcast_queue;
+
+		/*
+		 * The microcode will clear the more data
+		 * bit in the last frame it transmits.
+		 */
+		hdr->frame_control |=
+			cpu_to_le16(IEEE80211_FCTL_MOREDATA);
+	} else if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN)
+		txq_id = IWL_AUX_QUEUE;
+	else
+		txq_id = ctx->ac_to_queue[skb_get_queue_mapping(skb)];
+
+	WARN_ON_ONCE(!is_agg && txq_id != info->hw_queue);
+	WARN_ON_ONCE(is_agg &&
+		     priv->queue_to_mac80211[txq_id] != info->hw_queue);
+
+	if (iwl_trans_tx(priv->trans, skb, dev_cmd, txq_id))
+		goto drop_unlock_sta;
+
+	if (ieee80211_is_data_qos(fc) && !ieee80211_is_qos_nullfunc(fc) &&
+	    !ieee80211_has_morefrags(fc))
+		priv->tid_data[sta_id][tid].seq_number = seq_number;
+
+	spin_unlock(&priv->sta_lock);
+
+	/*
+	 * Avoid atomic ops if it isn't an associated client.
+	 * Also, if this is a packet for aggregation, don't
+	 * increase the counter because the ucode will stop
+	 * aggregation queues when their respective station
+	 * goes to sleep.
+	 */
+	if (sta_priv && sta_priv->client && !is_agg)
+		atomic_inc(&sta_priv->pending_frames);
+
+	if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN)
+		iwl_scan_offchannel_skb(priv);
+
+	return 0;
+
+drop_unlock_sta:
+	if (dev_cmd)
+		iwl_trans_free_tx_cmd(priv->trans, dev_cmd);
+	spin_unlock(&priv->sta_lock);
+drop_unlock_priv:
+	return -1;
+}
+
+static int iwlagn_alloc_agg_txq(struct iwl_priv *priv, int mq)
+{
+	int q;
+
+	for (q = IWLAGN_FIRST_AMPDU_QUEUE;
+	     q < priv->cfg->base_params->num_of_queues; q++) {
+		if (!test_and_set_bit(q, priv->agg_q_alloc)) {
+			priv->queue_to_mac80211[q] = mq;
+			return q;
+		}
+	}
+
+	return -ENOSPC;
+}
+
+static void iwlagn_dealloc_agg_txq(struct iwl_priv *priv, int q)
+{
+	clear_bit(q, priv->agg_q_alloc);
+	priv->queue_to_mac80211[q] = IWL_INVALID_MAC80211_QUEUE;
+}
+
+int iwlagn_tx_agg_stop(struct iwl_priv *priv, struct ieee80211_vif *vif,
+			struct ieee80211_sta *sta, u16 tid)
+{
+	struct iwl_tid_data *tid_data;
+	int sta_id, txq_id;
+	enum iwl_agg_state agg_state;
+
+	sta_id = iwl_sta_id(sta);
+
+	if (sta_id == IWL_INVALID_STATION) {
+		IWL_ERR(priv, "Invalid station for AGG tid %d\n", tid);
+		return -ENXIO;
+	}
+
+	spin_lock_bh(&priv->sta_lock);
+
+	tid_data = &priv->tid_data[sta_id][tid];
+	txq_id = priv->tid_data[sta_id][tid].agg.txq_id;
+
+	switch (priv->tid_data[sta_id][tid].agg.state) {
+	case IWL_EMPTYING_HW_QUEUE_ADDBA:
+		/*
+		* This can happen if the peer stops aggregation
+		* again before we've had a chance to drain the
+		* queue we selected previously, i.e. before the
+		* session was really started completely.
+		*/
+		IWL_DEBUG_HT(priv, "AGG stop before setup done\n");
+		goto turn_off;
+	case IWL_AGG_STARTING:
+		/*
+		 * This can happen when the session is stopped before
+		 * we receive ADDBA response
+		 */
+		IWL_DEBUG_HT(priv, "AGG stop before AGG became operational\n");
+		goto turn_off;
+	case IWL_AGG_ON:
+		break;
+	default:
+		IWL_WARN(priv, "Stopping AGG while state not ON "
+			 "or starting for %d on %d (%d)\n", sta_id, tid,
+			 priv->tid_data[sta_id][tid].agg.state);
+		spin_unlock_bh(&priv->sta_lock);
+		return 0;
+	}
+
+	tid_data->agg.ssn = SEQ_TO_SN(tid_data->seq_number);
+
+	/* There are still packets for this RA / TID in the HW */
+	if (!test_bit(txq_id, priv->agg_q_alloc)) {
+		IWL_DEBUG_TX_QUEUES(priv,
+			"stopping AGG on STA/TID %d/%d but hwq %d not used\n",
+			sta_id, tid, txq_id);
+	} else if (tid_data->agg.ssn != tid_data->next_reclaimed) {
+		IWL_DEBUG_TX_QUEUES(priv, "Can't proceed: ssn %d, "
+				    "next_recl = %d\n",
+				    tid_data->agg.ssn,
+				    tid_data->next_reclaimed);
+		priv->tid_data[sta_id][tid].agg.state =
+			IWL_EMPTYING_HW_QUEUE_DELBA;
+		spin_unlock_bh(&priv->sta_lock);
+		return 0;
+	}
+
+	IWL_DEBUG_TX_QUEUES(priv, "Can proceed: ssn = next_recl = %d\n",
+			    tid_data->agg.ssn);
+turn_off:
+	agg_state = priv->tid_data[sta_id][tid].agg.state;
+	priv->tid_data[sta_id][tid].agg.state = IWL_AGG_OFF;
+
+	spin_unlock_bh(&priv->sta_lock);
+
+	if (test_bit(txq_id, priv->agg_q_alloc)) {
+		/*
+		 * If the transport didn't know that we wanted to start
+		 * agreggation, don't tell it that we want to stop them.
+		 * This can happen when we don't get the addBA response on
+		 * time, or we hadn't time to drain the AC queues.
+		 */
+		if (agg_state == IWL_AGG_ON)
+			iwl_trans_txq_disable(priv->trans, txq_id);
+		else
+			IWL_DEBUG_TX_QUEUES(priv, "Don't disable tx agg: %d\n",
+					    agg_state);
+		iwlagn_dealloc_agg_txq(priv, txq_id);
+	}
+
+	ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+
+	return 0;
+}
+
+int iwlagn_tx_agg_start(struct iwl_priv *priv, struct ieee80211_vif *vif,
+			struct ieee80211_sta *sta, u16 tid, u16 *ssn)
+{
+	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
+	struct iwl_tid_data *tid_data;
+	int sta_id, txq_id, ret;
+
+	IWL_DEBUG_HT(priv, "TX AGG request on ra = %pM tid = %d\n",
+		     sta->addr, tid);
+
+	sta_id = iwl_sta_id(sta);
+	if (sta_id == IWL_INVALID_STATION) {
+		IWL_ERR(priv, "Start AGG on invalid station\n");
+		return -ENXIO;
+	}
+	if (unlikely(tid >= IWL_MAX_TID_COUNT))
+		return -EINVAL;
+
+	if (priv->tid_data[sta_id][tid].agg.state != IWL_AGG_OFF) {
+		IWL_ERR(priv, "Start AGG when state is not IWL_AGG_OFF !\n");
+		return -ENXIO;
+	}
+
+	txq_id = iwlagn_alloc_agg_txq(priv, ctx->ac_to_queue[tid_to_ac[tid]]);
+	if (txq_id < 0) {
+		IWL_DEBUG_TX_QUEUES(priv,
+			"No free aggregation queue for %pM/%d\n",
+			sta->addr, tid);
+		return txq_id;
+	}
+
+	ret = iwl_sta_tx_modify_enable_tid(priv, sta_id, tid);
+	if (ret)
+		return ret;
+
+	spin_lock_bh(&priv->sta_lock);
+	tid_data = &priv->tid_data[sta_id][tid];
+	tid_data->agg.ssn = SEQ_TO_SN(tid_data->seq_number);
+	tid_data->agg.txq_id = txq_id;
+
+	*ssn = tid_data->agg.ssn;
+
+	if (*ssn == tid_data->next_reclaimed) {
+		IWL_DEBUG_TX_QUEUES(priv, "Can proceed: ssn = next_recl = %d\n",
+				    tid_data->agg.ssn);
+		tid_data->agg.state = IWL_AGG_STARTING;
+		ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+	} else {
+		IWL_DEBUG_TX_QUEUES(priv, "Can't proceed: ssn %d, "
+				    "next_reclaimed = %d\n",
+				    tid_data->agg.ssn,
+				    tid_data->next_reclaimed);
+		tid_data->agg.state = IWL_EMPTYING_HW_QUEUE_ADDBA;
+	}
+	spin_unlock_bh(&priv->sta_lock);
+
+	return ret;
+}
+
+int iwlagn_tx_agg_oper(struct iwl_priv *priv, struct ieee80211_vif *vif,
+			struct ieee80211_sta *sta, u16 tid, u8 buf_size)
+{
+	struct iwl_station_priv *sta_priv = (void *) sta->drv_priv;
+	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
+	int q, fifo;
+	u16 ssn;
+
+	buf_size = min_t(int, buf_size, LINK_QUAL_AGG_FRAME_LIMIT_DEF);
+
+	spin_lock_bh(&priv->sta_lock);
+	ssn = priv->tid_data[sta_priv->sta_id][tid].agg.ssn;
+	q = priv->tid_data[sta_priv->sta_id][tid].agg.txq_id;
+	priv->tid_data[sta_priv->sta_id][tid].agg.state = IWL_AGG_ON;
+	spin_unlock_bh(&priv->sta_lock);
+
+	fifo = ctx->ac_to_fifo[tid_to_ac[tid]];
+
+	iwl_trans_txq_enable(priv->trans, q, fifo, sta_priv->sta_id, tid,
+			     buf_size, ssn);
+
+	/*
+	 * If the limit is 0, then it wasn't initialised yet,
+	 * use the default. We can do that since we take the
+	 * minimum below, and we don't want to go above our
+	 * default due to hardware restrictions.
+	 */
+	if (sta_priv->max_agg_bufsize == 0)
+		sta_priv->max_agg_bufsize =
+			LINK_QUAL_AGG_FRAME_LIMIT_DEF;
+
+	/*
+	 * Even though in theory the peer could have different
+	 * aggregation reorder buffer sizes for different sessions,
+	 * our ucode doesn't allow for that and has a global limit
+	 * for each station. Therefore, use the minimum of all the
+	 * aggregation sessions and our default value.
+	 */
+	sta_priv->max_agg_bufsize =
+		min(sta_priv->max_agg_bufsize, buf_size);
+
+	if (priv->hw_params.use_rts_for_aggregation) {
+		/*
+		 * switch to RTS/CTS if it is the prefer protection
+		 * method for HT traffic
+		 */
+
+		sta_priv->lq_sta.lq.general_params.flags |=
+			LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK;
+	}
+	priv->agg_tids_count++;
+	IWL_DEBUG_HT(priv, "priv->agg_tids_count = %u\n",
+		     priv->agg_tids_count);
+
+	sta_priv->lq_sta.lq.agg_params.agg_frame_cnt_limit =
+		sta_priv->max_agg_bufsize;
+
+	IWL_DEBUG_HT(priv, "Tx aggregation enabled on ra = %pM tid = %d\n",
+		 sta->addr, tid);
+
+	return iwl_send_lq_cmd(priv, ctx,
+			&sta_priv->lq_sta.lq, CMD_ASYNC, false);
+}
+
+static void iwlagn_check_ratid_empty(struct iwl_priv *priv, int sta_id, u8 tid)
+{
+	struct iwl_tid_data *tid_data = &priv->tid_data[sta_id][tid];
+	enum iwl_rxon_context_id ctx;
+	struct ieee80211_vif *vif;
+	u8 *addr;
+
+	lockdep_assert_held(&priv->sta_lock);
+
+	addr = priv->stations[sta_id].sta.sta.addr;
+	ctx = priv->stations[sta_id].ctxid;
+	vif = priv->contexts[ctx].vif;
+
+	switch (priv->tid_data[sta_id][tid].agg.state) {
+	case IWL_EMPTYING_HW_QUEUE_DELBA:
+		/* There are no packets for this RA / TID in the HW any more */
+		if (tid_data->agg.ssn == tid_data->next_reclaimed) {
+			IWL_DEBUG_TX_QUEUES(priv,
+				"Can continue DELBA flow ssn = next_recl ="
+				" %d", tid_data->next_reclaimed);
+			iwl_trans_txq_disable(priv->trans,
+					      tid_data->agg.txq_id);
+			iwlagn_dealloc_agg_txq(priv, tid_data->agg.txq_id);
+			tid_data->agg.state = IWL_AGG_OFF;
+			ieee80211_stop_tx_ba_cb_irqsafe(vif, addr, tid);
+		}
+		break;
+	case IWL_EMPTYING_HW_QUEUE_ADDBA:
+		/* There are no packets for this RA / TID in the HW any more */
+		if (tid_data->agg.ssn == tid_data->next_reclaimed) {
+			IWL_DEBUG_TX_QUEUES(priv,
+				"Can continue ADDBA flow ssn = next_recl ="
+				" %d", tid_data->next_reclaimed);
+			tid_data->agg.state = IWL_AGG_STARTING;
+			ieee80211_start_tx_ba_cb_irqsafe(vif, addr, tid);
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static void iwlagn_non_agg_tx_status(struct iwl_priv *priv,
+				     struct iwl_rxon_context *ctx,
+				     const u8 *addr1)
+{
+	struct ieee80211_sta *sta;
+	struct iwl_station_priv *sta_priv;
+
+	rcu_read_lock();
+	sta = ieee80211_find_sta(ctx->vif, addr1);
+	if (sta) {
+		sta_priv = (void *)sta->drv_priv;
+		/* avoid atomic ops if this isn't a client */
+		if (sta_priv->client &&
+		    atomic_dec_return(&sta_priv->pending_frames) == 0)
+			ieee80211_sta_block_awake(priv->hw, sta, false);
+	}
+	rcu_read_unlock();
+}
+
+/**
+ * translate ucode response to mac80211 tx status control values
+ */
+static void iwlagn_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags,
+				  struct ieee80211_tx_info *info)
+{
+	struct ieee80211_tx_rate *r = &info->status.rates[0];
+
+	info->status.antenna =
+		((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS);
+	if (rate_n_flags & RATE_MCS_HT_MSK)
+		r->flags |= IEEE80211_TX_RC_MCS;
+	if (rate_n_flags & RATE_MCS_GF_MSK)
+		r->flags |= IEEE80211_TX_RC_GREEN_FIELD;
+	if (rate_n_flags & RATE_MCS_HT40_MSK)
+		r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
+	if (rate_n_flags & RATE_MCS_DUP_MSK)
+		r->flags |= IEEE80211_TX_RC_DUP_DATA;
+	if (rate_n_flags & RATE_MCS_SGI_MSK)
+		r->flags |= IEEE80211_TX_RC_SHORT_GI;
+	r->idx = iwlagn_hwrate_to_mac80211_idx(rate_n_flags, info->band);
+}
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+const char *iwl_get_tx_fail_reason(u32 status)
+{
+#define TX_STATUS_FAIL(x) case TX_STATUS_FAIL_ ## x: return #x
+#define TX_STATUS_POSTPONE(x) case TX_STATUS_POSTPONE_ ## x: return #x
+
+	switch (status & TX_STATUS_MSK) {
+	case TX_STATUS_SUCCESS:
+		return "SUCCESS";
+	TX_STATUS_POSTPONE(DELAY);
+	TX_STATUS_POSTPONE(FEW_BYTES);
+	TX_STATUS_POSTPONE(BT_PRIO);
+	TX_STATUS_POSTPONE(QUIET_PERIOD);
+	TX_STATUS_POSTPONE(CALC_TTAK);
+	TX_STATUS_FAIL(INTERNAL_CROSSED_RETRY);
+	TX_STATUS_FAIL(SHORT_LIMIT);
+	TX_STATUS_FAIL(LONG_LIMIT);
+	TX_STATUS_FAIL(FIFO_UNDERRUN);
+	TX_STATUS_FAIL(DRAIN_FLOW);
+	TX_STATUS_FAIL(RFKILL_FLUSH);
+	TX_STATUS_FAIL(LIFE_EXPIRE);
+	TX_STATUS_FAIL(DEST_PS);
+	TX_STATUS_FAIL(HOST_ABORTED);
+	TX_STATUS_FAIL(BT_RETRY);
+	TX_STATUS_FAIL(STA_INVALID);
+	TX_STATUS_FAIL(FRAG_DROPPED);
+	TX_STATUS_FAIL(TID_DISABLE);
+	TX_STATUS_FAIL(FIFO_FLUSHED);
+	TX_STATUS_FAIL(INSUFFICIENT_CF_POLL);
+	TX_STATUS_FAIL(PASSIVE_NO_RX);
+	TX_STATUS_FAIL(NO_BEACON_ON_RADAR);
+	}
+
+	return "UNKNOWN";
+
+#undef TX_STATUS_FAIL
+#undef TX_STATUS_POSTPONE
+}
+#endif /* CONFIG_IWLWIFI_DEBUG */
+
+static void iwlagn_count_agg_tx_err_status(struct iwl_priv *priv, u16 status)
+{
+	status &= AGG_TX_STATUS_MSK;
+
+	switch (status) {
+	case AGG_TX_STATE_UNDERRUN_MSK:
+		priv->reply_agg_tx_stats.underrun++;
+		break;
+	case AGG_TX_STATE_BT_PRIO_MSK:
+		priv->reply_agg_tx_stats.bt_prio++;
+		break;
+	case AGG_TX_STATE_FEW_BYTES_MSK:
+		priv->reply_agg_tx_stats.few_bytes++;
+		break;
+	case AGG_TX_STATE_ABORT_MSK:
+		priv->reply_agg_tx_stats.abort++;
+		break;
+	case AGG_TX_STATE_LAST_SENT_TTL_MSK:
+		priv->reply_agg_tx_stats.last_sent_ttl++;
+		break;
+	case AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK:
+		priv->reply_agg_tx_stats.last_sent_try++;
+		break;
+	case AGG_TX_STATE_LAST_SENT_BT_KILL_MSK:
+		priv->reply_agg_tx_stats.last_sent_bt_kill++;
+		break;
+	case AGG_TX_STATE_SCD_QUERY_MSK:
+		priv->reply_agg_tx_stats.scd_query++;
+		break;
+	case AGG_TX_STATE_TEST_BAD_CRC32_MSK:
+		priv->reply_agg_tx_stats.bad_crc32++;
+		break;
+	case AGG_TX_STATE_RESPONSE_MSK:
+		priv->reply_agg_tx_stats.response++;
+		break;
+	case AGG_TX_STATE_DUMP_TX_MSK:
+		priv->reply_agg_tx_stats.dump_tx++;
+		break;
+	case AGG_TX_STATE_DELAY_TX_MSK:
+		priv->reply_agg_tx_stats.delay_tx++;
+		break;
+	default:
+		priv->reply_agg_tx_stats.unknown++;
+		break;
+	}
+}
+
+static void iwl_rx_reply_tx_agg(struct iwl_priv *priv,
+				struct iwlagn_tx_resp *tx_resp)
+{
+	struct agg_tx_status *frame_status = &tx_resp->status;
+	int tid = (tx_resp->ra_tid & IWLAGN_TX_RES_TID_MSK) >>
+		IWLAGN_TX_RES_TID_POS;
+	int sta_id = (tx_resp->ra_tid & IWLAGN_TX_RES_RA_MSK) >>
+		IWLAGN_TX_RES_RA_POS;
+	struct iwl_ht_agg *agg = &priv->tid_data[sta_id][tid].agg;
+	u32 status = le16_to_cpu(tx_resp->status.status);
+	int i;
+
+	WARN_ON(tid == IWL_TID_NON_QOS);
+
+	if (agg->wait_for_ba)
+		IWL_DEBUG_TX_REPLY(priv,
+			"got tx response w/o block-ack\n");
+
+	agg->rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags);
+	agg->wait_for_ba = (tx_resp->frame_count > 1);
+
+	/*
+	 * If the BT kill count is non-zero, we'll get this
+	 * notification again.
+	 */
+	if (tx_resp->bt_kill_count && tx_resp->frame_count == 1 &&
+	    priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist) {
+		IWL_DEBUG_COEX(priv, "receive reply tx w/ bt_kill\n");
+	}
+
+	if (tx_resp->frame_count == 1)
+		return;
+
+	/* Construct bit-map of pending frames within Tx window */
+	for (i = 0; i < tx_resp->frame_count; i++) {
+		u16 fstatus = le16_to_cpu(frame_status[i].status);
+
+		if (status & AGG_TX_STATUS_MSK)
+			iwlagn_count_agg_tx_err_status(priv, fstatus);
+
+		if (status & (AGG_TX_STATE_FEW_BYTES_MSK |
+			      AGG_TX_STATE_ABORT_MSK))
+			continue;
+
+		IWL_DEBUG_TX_REPLY(priv, "status %s (0x%08x), "
+				   "try-count (0x%08x)\n",
+				   iwl_get_agg_tx_fail_reason(fstatus),
+				   fstatus & AGG_TX_STATUS_MSK,
+				   fstatus & AGG_TX_TRY_MSK);
+	}
+}
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+#define AGG_TX_STATE_FAIL(x) case AGG_TX_STATE_ ## x: return #x
+
+const char *iwl_get_agg_tx_fail_reason(u16 status)
+{
+	status &= AGG_TX_STATUS_MSK;
+	switch (status) {
+	case AGG_TX_STATE_TRANSMITTED:
+		return "SUCCESS";
+		AGG_TX_STATE_FAIL(UNDERRUN_MSK);
+		AGG_TX_STATE_FAIL(BT_PRIO_MSK);
+		AGG_TX_STATE_FAIL(FEW_BYTES_MSK);
+		AGG_TX_STATE_FAIL(ABORT_MSK);
+		AGG_TX_STATE_FAIL(LAST_SENT_TTL_MSK);
+		AGG_TX_STATE_FAIL(LAST_SENT_TRY_CNT_MSK);
+		AGG_TX_STATE_FAIL(LAST_SENT_BT_KILL_MSK);
+		AGG_TX_STATE_FAIL(SCD_QUERY_MSK);
+		AGG_TX_STATE_FAIL(TEST_BAD_CRC32_MSK);
+		AGG_TX_STATE_FAIL(RESPONSE_MSK);
+		AGG_TX_STATE_FAIL(DUMP_TX_MSK);
+		AGG_TX_STATE_FAIL(DELAY_TX_MSK);
+	}
+
+	return "UNKNOWN";
+}
+#endif /* CONFIG_IWLWIFI_DEBUG */
+
+static inline u32 iwlagn_get_scd_ssn(struct iwlagn_tx_resp *tx_resp)
+{
+	return le32_to_cpup((__le32 *)&tx_resp->status +
+			    tx_resp->frame_count) & MAX_SN;
+}
+
+static void iwlagn_count_tx_err_status(struct iwl_priv *priv, u16 status)
+{
+	status &= TX_STATUS_MSK;
+
+	switch (status) {
+	case TX_STATUS_POSTPONE_DELAY:
+		priv->reply_tx_stats.pp_delay++;
+		break;
+	case TX_STATUS_POSTPONE_FEW_BYTES:
+		priv->reply_tx_stats.pp_few_bytes++;
+		break;
+	case TX_STATUS_POSTPONE_BT_PRIO:
+		priv->reply_tx_stats.pp_bt_prio++;
+		break;
+	case TX_STATUS_POSTPONE_QUIET_PERIOD:
+		priv->reply_tx_stats.pp_quiet_period++;
+		break;
+	case TX_STATUS_POSTPONE_CALC_TTAK:
+		priv->reply_tx_stats.pp_calc_ttak++;
+		break;
+	case TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY:
+		priv->reply_tx_stats.int_crossed_retry++;
+		break;
+	case TX_STATUS_FAIL_SHORT_LIMIT:
+		priv->reply_tx_stats.short_limit++;
+		break;
+	case TX_STATUS_FAIL_LONG_LIMIT:
+		priv->reply_tx_stats.long_limit++;
+		break;
+	case TX_STATUS_FAIL_FIFO_UNDERRUN:
+		priv->reply_tx_stats.fifo_underrun++;
+		break;
+	case TX_STATUS_FAIL_DRAIN_FLOW:
+		priv->reply_tx_stats.drain_flow++;
+		break;
+	case TX_STATUS_FAIL_RFKILL_FLUSH:
+		priv->reply_tx_stats.rfkill_flush++;
+		break;
+	case TX_STATUS_FAIL_LIFE_EXPIRE:
+		priv->reply_tx_stats.life_expire++;
+		break;
+	case TX_STATUS_FAIL_DEST_PS:
+		priv->reply_tx_stats.dest_ps++;
+		break;
+	case TX_STATUS_FAIL_HOST_ABORTED:
+		priv->reply_tx_stats.host_abort++;
+		break;
+	case TX_STATUS_FAIL_BT_RETRY:
+		priv->reply_tx_stats.bt_retry++;
+		break;
+	case TX_STATUS_FAIL_STA_INVALID:
+		priv->reply_tx_stats.sta_invalid++;
+		break;
+	case TX_STATUS_FAIL_FRAG_DROPPED:
+		priv->reply_tx_stats.frag_drop++;
+		break;
+	case TX_STATUS_FAIL_TID_DISABLE:
+		priv->reply_tx_stats.tid_disable++;
+		break;
+	case TX_STATUS_FAIL_FIFO_FLUSHED:
+		priv->reply_tx_stats.fifo_flush++;
+		break;
+	case TX_STATUS_FAIL_INSUFFICIENT_CF_POLL:
+		priv->reply_tx_stats.insuff_cf_poll++;
+		break;
+	case TX_STATUS_FAIL_PASSIVE_NO_RX:
+		priv->reply_tx_stats.fail_hw_drop++;
+		break;
+	case TX_STATUS_FAIL_NO_BEACON_ON_RADAR:
+		priv->reply_tx_stats.sta_color_mismatch++;
+		break;
+	default:
+		priv->reply_tx_stats.unknown++;
+		break;
+	}
+}
+
+static void iwlagn_set_tx_status(struct iwl_priv *priv,
+				 struct ieee80211_tx_info *info,
+				 struct iwlagn_tx_resp *tx_resp,
+				 bool is_agg)
+{
+	u16  status = le16_to_cpu(tx_resp->status.status);
+
+	info->status.rates[0].count = tx_resp->failure_frame + 1;
+	if (is_agg)
+		info->flags &= ~IEEE80211_TX_CTL_AMPDU;
+	info->flags |= iwl_tx_status_to_mac80211(status);
+	iwlagn_hwrate_to_tx_control(priv, le32_to_cpu(tx_resp->rate_n_flags),
+				    info);
+	if (!iwl_is_tx_success(status))
+		iwlagn_count_tx_err_status(priv, status);
+}
+
+static void iwl_check_abort_status(struct iwl_priv *priv,
+			    u8 frame_count, u32 status)
+{
+	if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) {
+		IWL_ERR(priv, "Tx flush command to flush out all frames\n");
+		if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
+			queue_work(priv->workqueue, &priv->tx_flush);
+	}
+}
+
+static int iwl_reclaim(struct iwl_priv *priv, int sta_id, int tid,
+		       int txq_id, int ssn, struct sk_buff_head *skbs)
+{
+	if (unlikely(txq_id >= IWLAGN_FIRST_AMPDU_QUEUE &&
+		     tid != IWL_TID_NON_QOS &&
+		     txq_id != priv->tid_data[sta_id][tid].agg.txq_id)) {
+		/*
+		 * FIXME: this is a uCode bug which need to be addressed,
+		 * log the information and return for now.
+		 * Since it is can possibly happen very often and in order
+		 * not to fill the syslog, don't use IWL_ERR or IWL_WARN
+		 */
+		IWL_DEBUG_TX_QUEUES(priv,
+			"Bad queue mapping txq_id=%d, agg_txq[sta:%d,tid:%d]=%d\n",
+			txq_id, sta_id, tid,
+			priv->tid_data[sta_id][tid].agg.txq_id);
+		return 1;
+	}
+
+	iwl_trans_reclaim(priv->trans, txq_id, ssn, skbs);
+	return 0;
+}
+
+int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb,
+			       struct iwl_device_cmd *cmd)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	u16 sequence = le16_to_cpu(pkt->hdr.sequence);
+	int txq_id = SEQ_TO_QUEUE(sequence);
+	int cmd_index __maybe_unused = SEQ_TO_INDEX(sequence);
+	struct iwlagn_tx_resp *tx_resp = (void *)pkt->data;
+	struct ieee80211_hdr *hdr;
+	u32 status = le16_to_cpu(tx_resp->status.status);
+	u16 ssn = iwlagn_get_scd_ssn(tx_resp);
+	int tid;
+	int sta_id;
+	int freed;
+	struct ieee80211_tx_info *info;
+	struct sk_buff_head skbs;
+	struct sk_buff *skb;
+	struct iwl_rxon_context *ctx;
+	bool is_agg = (txq_id >= IWLAGN_FIRST_AMPDU_QUEUE);
+	bool is_offchannel_skb;
+
+	tid = (tx_resp->ra_tid & IWLAGN_TX_RES_TID_MSK) >>
+		IWLAGN_TX_RES_TID_POS;
+	sta_id = (tx_resp->ra_tid & IWLAGN_TX_RES_RA_MSK) >>
+		IWLAGN_TX_RES_RA_POS;
+
+	spin_lock(&priv->sta_lock);
+
+	if (is_agg)
+		iwl_rx_reply_tx_agg(priv, tx_resp);
+
+	__skb_queue_head_init(&skbs);
+
+	is_offchannel_skb = false;
+
+	if (tx_resp->frame_count == 1) {
+		u16 next_reclaimed = le16_to_cpu(tx_resp->seq_ctl);
+		next_reclaimed = SEQ_TO_SN(next_reclaimed + 0x10);
+
+		if (is_agg) {
+			/* If this is an aggregation queue, we can rely on the
+			 * ssn since the wifi sequence number corresponds to
+			 * the index in the TFD ring (%256).
+			 * The seq_ctl is the sequence control of the packet
+			 * to which this Tx response relates. But if there is a
+			 * hole in the bitmap of the BA we received, this Tx
+			 * response may allow to reclaim the hole and all the
+			 * subsequent packets that were already acked.
+			 * In that case, seq_ctl != ssn, and the next packet
+			 * to be reclaimed will be ssn and not seq_ctl.
+			 */
+			next_reclaimed = ssn;
+		}
+
+		if (tid != IWL_TID_NON_QOS) {
+			priv->tid_data[sta_id][tid].next_reclaimed =
+				next_reclaimed;
+			IWL_DEBUG_TX_REPLY(priv, "Next reclaimed packet:%d\n",
+						  next_reclaimed);
+		}
+
+		/*we can free until ssn % q.n_bd not inclusive */
+		WARN_ON_ONCE(iwl_reclaim(priv, sta_id, tid,
+					 txq_id, ssn, &skbs));
+		iwlagn_check_ratid_empty(priv, sta_id, tid);
+		freed = 0;
+
+		/* process frames */
+		skb_queue_walk(&skbs, skb) {
+			hdr = (struct ieee80211_hdr *)skb->data;
+
+			if (!ieee80211_is_data_qos(hdr->frame_control))
+				priv->last_seq_ctl = tx_resp->seq_ctl;
+
+			info = IEEE80211_SKB_CB(skb);
+			ctx = info->driver_data[0];
+			iwl_trans_free_tx_cmd(priv->trans,
+					      info->driver_data[1]);
+
+			memset(&info->status, 0, sizeof(info->status));
+
+			if (status == TX_STATUS_FAIL_PASSIVE_NO_RX &&
+			    iwl_is_associated_ctx(ctx) && ctx->vif &&
+			    ctx->vif->type == NL80211_IFTYPE_STATION) {
+				/* block and stop all queues */
+				priv->passive_no_rx = true;
+				IWL_DEBUG_TX_QUEUES(priv, "stop all queues: "
+						    "passive channel");
+				ieee80211_stop_queues(priv->hw);
+
+				IWL_DEBUG_TX_REPLY(priv,
+					   "TXQ %d status %s (0x%08x) "
+					   "rate_n_flags 0x%x retries %d\n",
+					   txq_id,
+					   iwl_get_tx_fail_reason(status),
+					   status,
+					   le32_to_cpu(tx_resp->rate_n_flags),
+					   tx_resp->failure_frame);
+
+				IWL_DEBUG_TX_REPLY(priv,
+					   "FrameCnt = %d, idx=%d\n",
+					   tx_resp->frame_count, cmd_index);
+			}
+
+			/* check if BAR is needed */
+			if (is_agg && !iwl_is_tx_success(status))
+				info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
+			iwlagn_set_tx_status(priv, IEEE80211_SKB_CB(skb),
+				     tx_resp, is_agg);
+			if (!is_agg)
+				iwlagn_non_agg_tx_status(priv, ctx, hdr->addr1);
+
+			is_offchannel_skb =
+				(info->flags & IEEE80211_TX_CTL_TX_OFFCHAN);
+			freed++;
+		}
+
+		WARN_ON(!is_agg && freed != 1);
+
+		/*
+		 * An offchannel frame can be send only on the AUX queue, where
+		 * there is no aggregation (and reordering) so it only is single
+		 * skb is expected to be processed.
+		 */
+		WARN_ON(is_offchannel_skb && freed != 1);
+	}
+
+	iwl_check_abort_status(priv, tx_resp->frame_count, status);
+	spin_unlock(&priv->sta_lock);
+
+	while (!skb_queue_empty(&skbs)) {
+		skb = __skb_dequeue(&skbs);
+		ieee80211_tx_status(priv->hw, skb);
+	}
+
+	if (is_offchannel_skb)
+		iwl_scan_offchannel_skb_status(priv);
+
+	return 0;
+}
+
+/**
+ * iwlagn_rx_reply_compressed_ba - Handler for REPLY_COMPRESSED_BA
+ *
+ * Handles block-acknowledge notification from device, which reports success
+ * of frames sent via aggregation.
+ */
+int iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv,
+				   struct iwl_rx_cmd_buffer *rxb,
+				   struct iwl_device_cmd *cmd)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl_compressed_ba_resp *ba_resp = (void *)pkt->data;
+	struct iwl_ht_agg *agg;
+	struct sk_buff_head reclaimed_skbs;
+	struct ieee80211_tx_info *info;
+	struct ieee80211_hdr *hdr;
+	struct sk_buff *skb;
+	int sta_id;
+	int tid;
+	int freed;
+
+	/* "flow" corresponds to Tx queue */
+	u16 scd_flow = le16_to_cpu(ba_resp->scd_flow);
+
+	/* "ssn" is start of block-ack Tx window, corresponds to index
+	 * (in Tx queue's circular buffer) of first TFD/frame in window */
+	u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn);
+
+	if (scd_flow >= priv->cfg->base_params->num_of_queues) {
+		IWL_ERR(priv,
+			"BUG_ON scd_flow is bigger than number of queues\n");
+		return 0;
+	}
+
+	sta_id = ba_resp->sta_id;
+	tid = ba_resp->tid;
+	agg = &priv->tid_data[sta_id][tid].agg;
+
+	spin_lock(&priv->sta_lock);
+
+	if (unlikely(!agg->wait_for_ba)) {
+		if (unlikely(ba_resp->bitmap))
+			IWL_ERR(priv, "Received BA when not expected\n");
+		spin_unlock(&priv->sta_lock);
+		return 0;
+	}
+
+	__skb_queue_head_init(&reclaimed_skbs);
+
+	/* Release all TFDs before the SSN, i.e. all TFDs in front of
+	 * block-ack window (we assume that they've been successfully
+	 * transmitted ... if not, it's too late anyway). */
+	if (iwl_reclaim(priv, sta_id, tid, scd_flow,
+			ba_resp_scd_ssn, &reclaimed_skbs)) {
+		spin_unlock(&priv->sta_lock);
+		return 0;
+	}
+
+	IWL_DEBUG_TX_REPLY(priv, "REPLY_COMPRESSED_BA [%d] Received from %pM, "
+			   "sta_id = %d\n",
+			   agg->wait_for_ba,
+			   (u8 *) &ba_resp->sta_addr_lo32,
+			   ba_resp->sta_id);
+	IWL_DEBUG_TX_REPLY(priv, "TID = %d, SeqCtl = %d, bitmap = 0x%llx, "
+			   "scd_flow = %d, scd_ssn = %d sent:%d, acked:%d\n",
+			   ba_resp->tid, le16_to_cpu(ba_resp->seq_ctl),
+			   (unsigned long long)le64_to_cpu(ba_resp->bitmap),
+			   scd_flow, ba_resp_scd_ssn, ba_resp->txed,
+			   ba_resp->txed_2_done);
+
+	/* Mark that the expected block-ack response arrived */
+	agg->wait_for_ba = false;
+
+	/* Sanity check values reported by uCode */
+	if (ba_resp->txed_2_done > ba_resp->txed) {
+		IWL_DEBUG_TX_REPLY(priv,
+			"bogus sent(%d) and ack(%d) count\n",
+			ba_resp->txed, ba_resp->txed_2_done);
+		/*
+		 * set txed_2_done = txed,
+		 * so it won't impact rate scale
+		 */
+		ba_resp->txed = ba_resp->txed_2_done;
+	}
+
+	priv->tid_data[sta_id][tid].next_reclaimed = ba_resp_scd_ssn;
+
+	iwlagn_check_ratid_empty(priv, sta_id, tid);
+	freed = 0;
+
+	skb_queue_walk(&reclaimed_skbs, skb) {
+		hdr = (struct ieee80211_hdr *)skb->data;
+
+		if (ieee80211_is_data_qos(hdr->frame_control))
+			freed++;
+		else
+			WARN_ON_ONCE(1);
+
+		info = IEEE80211_SKB_CB(skb);
+		iwl_trans_free_tx_cmd(priv->trans, info->driver_data[1]);
+
+		if (freed == 1) {
+			/* this is the first skb we deliver in this batch */
+			/* put the rate scaling data there */
+			info = IEEE80211_SKB_CB(skb);
+			memset(&info->status, 0, sizeof(info->status));
+			info->flags |= IEEE80211_TX_STAT_ACK;
+			info->flags |= IEEE80211_TX_STAT_AMPDU;
+			info->status.ampdu_ack_len = ba_resp->txed_2_done;
+			info->status.ampdu_len = ba_resp->txed;
+			iwlagn_hwrate_to_tx_control(priv, agg->rate_n_flags,
+						    info);
+		}
+	}
+
+	spin_unlock(&priv->sta_lock);
+
+	while (!skb_queue_empty(&reclaimed_skbs)) {
+		skb = __skb_dequeue(&reclaimed_skbs);
+		ieee80211_tx_status(priv->hw, skb);
+	}
+
+	return 0;
+}
diff --git a/drivers/net/wireless/iwlwifi/dvm/ucode.c b/drivers/net/wireless/iwlwifi/dvm/ucode.c
new file mode 100644
index 00000000000..b3a314ba48c
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/dvm/ucode.c
@@ -0,0 +1,520 @@
+/******************************************************************************
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "iwl-io.h"
+#include "iwl-agn-hw.h"
+#include "iwl-trans.h"
+#include "iwl-fh.h"
+#include "iwl-op-mode.h"
+
+#include "dev.h"
+#include "agn.h"
+#include "calib.h"
+
+/******************************************************************************
+ *
+ * uCode download functions
+ *
+ ******************************************************************************/
+
+static inline const struct fw_img *
+iwl_get_ucode_image(struct iwl_priv *priv, enum iwl_ucode_type ucode_type)
+{
+	if (ucode_type >= IWL_UCODE_TYPE_MAX)
+		return NULL;
+
+	return &priv->fw->img[ucode_type];
+}
+
+/*
+ *  Calibration
+ */
+static int iwl_set_Xtal_calib(struct iwl_priv *priv)
+{
+	struct iwl_calib_xtal_freq_cmd cmd;
+	__le16 *xtal_calib = priv->eeprom_data->xtal_calib;
+
+	iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_CRYSTAL_FRQ_CMD);
+	cmd.cap_pin1 = le16_to_cpu(xtal_calib[0]);
+	cmd.cap_pin2 = le16_to_cpu(xtal_calib[1]);
+	return iwl_calib_set(priv, (void *)&cmd, sizeof(cmd));
+}
+
+static int iwl_set_temperature_offset_calib(struct iwl_priv *priv)
+{
+	struct iwl_calib_temperature_offset_cmd cmd;
+
+	memset(&cmd, 0, sizeof(cmd));
+	iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD);
+	cmd.radio_sensor_offset = priv->eeprom_data->raw_temperature;
+	if (!(cmd.radio_sensor_offset))
+		cmd.radio_sensor_offset = DEFAULT_RADIO_SENSOR_OFFSET;
+
+	IWL_DEBUG_CALIB(priv, "Radio sensor offset: %d\n",
+			le16_to_cpu(cmd.radio_sensor_offset));
+	return iwl_calib_set(priv, (void *)&cmd, sizeof(cmd));
+}
+
+static int iwl_set_temperature_offset_calib_v2(struct iwl_priv *priv)
+{
+	struct iwl_calib_temperature_offset_v2_cmd cmd;
+
+	memset(&cmd, 0, sizeof(cmd));
+	iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD);
+	cmd.radio_sensor_offset_high = priv->eeprom_data->kelvin_temperature;
+	cmd.radio_sensor_offset_low = priv->eeprom_data->raw_temperature;
+	if (!cmd.radio_sensor_offset_low) {
+		IWL_DEBUG_CALIB(priv, "no info in EEPROM, use default\n");
+		cmd.radio_sensor_offset_low = DEFAULT_RADIO_SENSOR_OFFSET;
+		cmd.radio_sensor_offset_high = DEFAULT_RADIO_SENSOR_OFFSET;
+	}
+	cmd.burntVoltageRef = priv->eeprom_data->calib_voltage;
+
+	IWL_DEBUG_CALIB(priv, "Radio sensor offset high: %d\n",
+			le16_to_cpu(cmd.radio_sensor_offset_high));
+	IWL_DEBUG_CALIB(priv, "Radio sensor offset low: %d\n",
+			le16_to_cpu(cmd.radio_sensor_offset_low));
+	IWL_DEBUG_CALIB(priv, "Voltage Ref: %d\n",
+			le16_to_cpu(cmd.burntVoltageRef));
+
+	return iwl_calib_set(priv, (void *)&cmd, sizeof(cmd));
+}
+
+static int iwl_send_calib_cfg(struct iwl_priv *priv)
+{
+	struct iwl_calib_cfg_cmd calib_cfg_cmd;
+	struct iwl_host_cmd cmd = {
+		.id = CALIBRATION_CFG_CMD,
+		.len = { sizeof(struct iwl_calib_cfg_cmd), },
+		.data = { &calib_cfg_cmd, },
+	};
+
+	memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd));
+	calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_INIT_CFG_ALL;
+	calib_cfg_cmd.ucd_calib_cfg.once.start = IWL_CALIB_INIT_CFG_ALL;
+	calib_cfg_cmd.ucd_calib_cfg.once.send_res = IWL_CALIB_INIT_CFG_ALL;
+	calib_cfg_cmd.ucd_calib_cfg.flags =
+		IWL_CALIB_CFG_FLAG_SEND_COMPLETE_NTFY_MSK;
+
+	return iwl_dvm_send_cmd(priv, &cmd);
+}
+
+int iwl_init_alive_start(struct iwl_priv *priv)
+{
+	int ret;
+
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist) {
+		/*
+		 * Tell uCode we are ready to perform calibration
+		 * need to perform this before any calibration
+		 * no need to close the envlope since we are going
+		 * to load the runtime uCode later.
+		 */
+		ret = iwl_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
+			BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
+		if (ret)
+			return ret;
+
+	}
+
+	ret = iwl_send_calib_cfg(priv);
+	if (ret)
+		return ret;
+
+	/**
+	 * temperature offset calibration is only needed for runtime ucode,
+	 * so prepare the value now.
+	 */
+	if (priv->cfg->need_temp_offset_calib) {
+		if (priv->cfg->temp_offset_v2)
+			return iwl_set_temperature_offset_calib_v2(priv);
+		else
+			return iwl_set_temperature_offset_calib(priv);
+	}
+
+	return 0;
+}
+
+static int iwl_send_wimax_coex(struct iwl_priv *priv)
+{
+	struct iwl_wimax_coex_cmd coex_cmd;
+
+	/* coexistence is disabled */
+	memset(&coex_cmd, 0, sizeof(coex_cmd));
+
+	return iwl_dvm_send_cmd_pdu(priv,
+				COEX_PRIORITY_TABLE_CMD, CMD_SYNC,
+				sizeof(coex_cmd), &coex_cmd);
+}
+
+static const u8 iwl_bt_prio_tbl[BT_COEX_PRIO_TBL_EVT_MAX] = {
+	((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_LOW << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_LOW << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_HIGH << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_HIGH << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(1 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_BYPASS << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_COEX_OFF << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	((BT_COEX_PRIO_TBL_PRIO_COEX_ON << IWL_BT_COEX_PRIO_TBL_PRIO_POS) |
+		(0 << IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS)),
+	0, 0, 0, 0, 0, 0, 0
+};
+
+void iwl_send_prio_tbl(struct iwl_priv *priv)
+{
+	struct iwl_bt_coex_prio_table_cmd prio_tbl_cmd;
+
+	memcpy(prio_tbl_cmd.prio_tbl, iwl_bt_prio_tbl,
+		sizeof(iwl_bt_prio_tbl));
+	if (iwl_dvm_send_cmd_pdu(priv,
+				REPLY_BT_COEX_PRIO_TABLE, CMD_SYNC,
+				sizeof(prio_tbl_cmd), &prio_tbl_cmd))
+		IWL_ERR(priv, "failed to send BT prio tbl command\n");
+}
+
+int iwl_send_bt_env(struct iwl_priv *priv, u8 action, u8 type)
+{
+	struct iwl_bt_coex_prot_env_cmd env_cmd;
+	int ret;
+
+	env_cmd.action = action;
+	env_cmd.type = type;
+	ret = iwl_dvm_send_cmd_pdu(priv,
+			       REPLY_BT_COEX_PROT_ENV, CMD_SYNC,
+			       sizeof(env_cmd), &env_cmd);
+	if (ret)
+		IWL_ERR(priv, "failed to send BT env command\n");
+	return ret;
+}
+
+
+static int iwl_alive_notify(struct iwl_priv *priv)
+{
+	int ret;
+
+	iwl_trans_fw_alive(priv->trans);
+
+	priv->passive_no_rx = false;
+	priv->transport_queue_stop = 0;
+
+	ret = iwl_send_wimax_coex(priv);
+	if (ret)
+		return ret;
+
+	if (!priv->cfg->no_xtal_calib) {
+		ret = iwl_set_Xtal_calib(priv);
+		if (ret)
+			return ret;
+	}
+
+	return iwl_send_calib_results(priv);
+}
+
+
+/**
+ * iwl_verify_inst_sparse - verify runtime uCode image in card vs. host,
+ *   using sample data 100 bytes apart.  If these sample points are good,
+ *   it's a pretty good bet that everything between them is good, too.
+ */
+static int iwl_verify_sec_sparse(struct iwl_priv *priv,
+				  const struct fw_desc *fw_desc)
+{
+	__le32 *image = (__le32 *)fw_desc->v_addr;
+	u32 len = fw_desc->len;
+	u32 val;
+	u32 i;
+
+	IWL_DEBUG_FW(priv, "ucode inst image size is %u\n", len);
+
+	for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
+		/* read data comes through single port, auto-incr addr */
+		/* NOTE: Use the debugless read so we don't flood kernel log
+		 * if IWL_DL_IO is set */
+		iwl_write_direct32(priv->trans, HBUS_TARG_MEM_RADDR,
+			i + fw_desc->offset);
+		val = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT);
+		if (val != le32_to_cpu(*image))
+			return -EIO;
+	}
+
+	return 0;
+}
+
+static void iwl_print_mismatch_sec(struct iwl_priv *priv,
+				    const struct fw_desc *fw_desc)
+{
+	__le32 *image = (__le32 *)fw_desc->v_addr;
+	u32 len = fw_desc->len;
+	u32 val;
+	u32 offs;
+	int errors = 0;
+
+	IWL_DEBUG_FW(priv, "ucode inst image size is %u\n", len);
+
+	iwl_write_direct32(priv->trans, HBUS_TARG_MEM_RADDR,
+				fw_desc->offset);
+
+	for (offs = 0;
+	     offs < len && errors < 20;
+	     offs += sizeof(u32), image++) {
+		/* read data comes through single port, auto-incr addr */
+		val = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT);
+		if (val != le32_to_cpu(*image)) {
+			IWL_ERR(priv, "uCode INST section at "
+				"offset 0x%x, is 0x%x, s/b 0x%x\n",
+				offs, val, le32_to_cpu(*image));
+			errors++;
+		}
+	}
+}
+
+/**
+ * iwl_verify_ucode - determine which instruction image is in SRAM,
+ *    and verify its contents
+ */
+static int iwl_verify_ucode(struct iwl_priv *priv,
+			    enum iwl_ucode_type ucode_type)
+{
+	const struct fw_img *img = iwl_get_ucode_image(priv, ucode_type);
+
+	if (!img) {
+		IWL_ERR(priv, "Invalid ucode requested (%d)\n", ucode_type);
+		return -EINVAL;
+	}
+
+	if (!iwl_verify_sec_sparse(priv, &img->sec[IWL_UCODE_SECTION_INST])) {
+		IWL_DEBUG_FW(priv, "uCode is good in inst SRAM\n");
+		return 0;
+	}
+
+	IWL_ERR(priv, "UCODE IMAGE IN INSTRUCTION SRAM NOT VALID!!\n");
+
+	iwl_print_mismatch_sec(priv, &img->sec[IWL_UCODE_SECTION_INST]);
+	return -EIO;
+}
+
+struct iwl_alive_data {
+	bool valid;
+	u8 subtype;
+};
+
+static bool iwl_alive_fn(struct iwl_notif_wait_data *notif_wait,
+			 struct iwl_rx_packet *pkt, void *data)
+{
+	struct iwl_priv *priv =
+		container_of(notif_wait, struct iwl_priv, notif_wait);
+	struct iwl_alive_data *alive_data = data;
+	struct iwl_alive_resp *palive;
+
+	palive = (void *)pkt->data;
+
+	IWL_DEBUG_FW(priv, "Alive ucode status 0x%08X revision "
+		       "0x%01X 0x%01X\n",
+		       palive->is_valid, palive->ver_type,
+		       palive->ver_subtype);
+
+	priv->device_pointers.error_event_table =
+		le32_to_cpu(palive->error_event_table_ptr);
+	priv->device_pointers.log_event_table =
+		le32_to_cpu(palive->log_event_table_ptr);
+
+	alive_data->subtype = palive->ver_subtype;
+	alive_data->valid = palive->is_valid == UCODE_VALID_OK;
+
+	return true;
+}
+
+#define UCODE_ALIVE_TIMEOUT	HZ
+#define UCODE_CALIB_TIMEOUT	(2*HZ)
+
+int iwl_load_ucode_wait_alive(struct iwl_priv *priv,
+				 enum iwl_ucode_type ucode_type)
+{
+	struct iwl_notification_wait alive_wait;
+	struct iwl_alive_data alive_data;
+	const struct fw_img *fw;
+	int ret;
+	enum iwl_ucode_type old_type;
+	static const u8 alive_cmd[] = { REPLY_ALIVE };
+
+	old_type = priv->cur_ucode;
+	priv->cur_ucode = ucode_type;
+	fw = iwl_get_ucode_image(priv, ucode_type);
+
+	priv->ucode_loaded = false;
+
+	if (!fw)
+		return -EINVAL;
+
+	iwl_init_notification_wait(&priv->notif_wait, &alive_wait,
+				   alive_cmd, ARRAY_SIZE(alive_cmd),
+				   iwl_alive_fn, &alive_data);
+
+	ret = iwl_trans_start_fw(priv->trans, fw);
+	if (ret) {
+		priv->cur_ucode = old_type;
+		iwl_remove_notification(&priv->notif_wait, &alive_wait);
+		return ret;
+	}
+
+	/*
+	 * Some things may run in the background now, but we
+	 * just wait for the ALIVE notification here.
+	 */
+	ret = iwl_wait_notification(&priv->notif_wait, &alive_wait,
+					UCODE_ALIVE_TIMEOUT);
+	if (ret) {
+		priv->cur_ucode = old_type;
+		return ret;
+	}
+
+	if (!alive_data.valid) {
+		IWL_ERR(priv, "Loaded ucode is not valid!\n");
+		priv->cur_ucode = old_type;
+		return -EIO;
+	}
+
+	/*
+	 * This step takes a long time (60-80ms!!) and
+	 * WoWLAN image should be loaded quickly, so
+	 * skip it for WoWLAN.
+	 */
+	if (ucode_type != IWL_UCODE_WOWLAN) {
+		ret = iwl_verify_ucode(priv, ucode_type);
+		if (ret) {
+			priv->cur_ucode = old_type;
+			return ret;
+		}
+
+		/* delay a bit to give rfkill time to run */
+		msleep(5);
+	}
+
+	ret = iwl_alive_notify(priv);
+	if (ret) {
+		IWL_WARN(priv,
+			"Could not complete ALIVE transition: %d\n", ret);
+		priv->cur_ucode = old_type;
+		return ret;
+	}
+
+	priv->ucode_loaded = true;
+
+	return 0;
+}
+
+static bool iwlagn_wait_calib(struct iwl_notif_wait_data *notif_wait,
+			      struct iwl_rx_packet *pkt, void *data)
+{
+	struct iwl_priv *priv = data;
+	struct iwl_calib_hdr *hdr;
+	int len;
+
+	if (pkt->hdr.cmd != CALIBRATION_RES_NOTIFICATION) {
+		WARN_ON(pkt->hdr.cmd != CALIBRATION_COMPLETE_NOTIFICATION);
+		return true;
+	}
+
+	hdr = (struct iwl_calib_hdr *)pkt->data;
+	len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
+
+	/* reduce the size by the length field itself */
+	len -= sizeof(__le32);
+
+	if (iwl_calib_set(priv, hdr, len))
+		IWL_ERR(priv, "Failed to record calibration data %d\n",
+			hdr->op_code);
+
+	return false;
+}
+
+int iwl_run_init_ucode(struct iwl_priv *priv)
+{
+	struct iwl_notification_wait calib_wait;
+	static const u8 calib_complete[] = {
+		CALIBRATION_RES_NOTIFICATION,
+		CALIBRATION_COMPLETE_NOTIFICATION
+	};
+	int ret;
+
+	lockdep_assert_held(&priv->mutex);
+
+	/* No init ucode required? Curious, but maybe ok */
+	if (!priv->fw->img[IWL_UCODE_INIT].sec[0].len)
+		return 0;
+
+	if (priv->init_ucode_run)
+		return 0;
+
+	iwl_init_notification_wait(&priv->notif_wait, &calib_wait,
+				   calib_complete, ARRAY_SIZE(calib_complete),
+				   iwlagn_wait_calib, priv);
+
+	/* Will also start the device */
+	ret = iwl_load_ucode_wait_alive(priv, IWL_UCODE_INIT);
+	if (ret)
+		goto error;
+
+	ret = iwl_init_alive_start(priv);
+	if (ret)
+		goto error;
+
+	/*
+	 * Some things may run in the background now, but we
+	 * just wait for the calibration complete notification.
+	 */
+	ret = iwl_wait_notification(&priv->notif_wait, &calib_wait,
+					UCODE_CALIB_TIMEOUT);
+	if (!ret)
+		priv->init_ucode_run = true;
+
+	goto out;
+
+ error:
+	iwl_remove_notification(&priv->notif_wait, &calib_wait);
+ out:
+	/* Whatever happened, stop the device */
+	iwl_trans_stop_device(priv->trans);
+	priv->ucode_loaded = false;
+
+	return ret;
+}