iwlwifi: dynamically determine lib_ops

Having the pointer to lib_ops in the config
makes it impossible to split the driver into
different modules. Determine the ops based on
the device family enumeration to get rid of
the direct pointer.

Also move all the opmode specific code from
the iwl-[1256]000.c files into a new file
iwl-agn-devices.c so that the former only
have configuration data now.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 2 insertions, 110 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index 66f86c8e060..e9006078f4e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -24,26 +24,11 @@
  *
  *****************************************************************************/
 
-#include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <net/mac80211.h>
-#include <linux/etherdevice.h>
-#include <asm/unaligned.h>
 #include <linux/stringify.h>
-
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-io.h"
-#include "iwl-agn.h"
-#include "iwl-agn-hw.h"
-#include "iwl-shared.h"
+#include "iwl-config.h"
 #include "iwl-cfg.h"
-#include "iwl-prph.h"
+#include "iwl-dev.h" /* still needed */
 
 /* Highest firmware API version supported */
 #define IWL1000_UCODE_API_MAX 6
@@ -64,97 +49,6 @@
 #define IWL100_MODULE_FIRMWARE(api) IWL100_FW_PRE __stringify(api) ".ucode"
 
 
-/*
- * For 1000, use advance thermal throttling critical temperature threshold,
- * but legacy thermal management implementation for now.
- * This is for the reason of 1000 uCode using advance thermal throttling API
- * but not implement ct_kill_exit based on ct_kill exit temperature
- * so the thermal throttling will still based on legacy thermal throttling
- * management.
- * The code here need to be modified once 1000 uCode has the advanced thermal
- * throttling algorithm in place
- */
-static void iwl1000_set_ct_threshold(struct iwl_priv *priv)
-{
-	/* want Celsius */
-	priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
-	priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
-}
-
-/* NIC configuration for 1000 series */
-static void iwl1000_nic_config(struct iwl_priv *priv)
-{
-	/* set CSR_HW_CONFIG_REG for uCode use */
-	iwl_set_bit(trans(priv), CSR_HW_IF_CONFIG_REG,
-		    CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
-		    CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
-
-	/* Setting digital SVR for 1000 card to 1.32V */
-	/* locking is acquired in iwl_set_bits_mask_prph() function */
-	iwl_set_bits_mask_prph(trans(priv), APMG_DIGITAL_SVR_REG,
-				APMG_SVR_DIGITAL_VOLTAGE_1_32,
-				~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK);
-}
-
-static const struct iwl_sensitivity_ranges iwl1000_sensitivity = {
-	.min_nrg_cck = 95,
-	.auto_corr_min_ofdm = 90,
-	.auto_corr_min_ofdm_mrc = 170,
-	.auto_corr_min_ofdm_x1 = 120,
-	.auto_corr_min_ofdm_mrc_x1 = 240,
-
-	.auto_corr_max_ofdm = 120,
-	.auto_corr_max_ofdm_mrc = 210,
-	.auto_corr_max_ofdm_x1 = 155,
-	.auto_corr_max_ofdm_mrc_x1 = 290,
-
-	.auto_corr_min_cck = 125,
-	.auto_corr_max_cck = 200,
-	.auto_corr_min_cck_mrc = 170,
-	.auto_corr_max_cck_mrc = 400,
-	.nrg_th_cck = 95,
-	.nrg_th_ofdm = 95,
-
-	.barker_corr_th_min = 190,
-	.barker_corr_th_min_mrc = 390,
-	.nrg_th_cca = 62,
-};
-
-static void iwl1000_hw_set_hw_params(struct iwl_priv *priv)
-{
-	priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ);
-
-	priv->hw_params.tx_chains_num =
-		num_of_ant(priv->hw_params.valid_tx_ant);
-	if (cfg(priv)->rx_with_siso_diversity)
-		priv->hw_params.rx_chains_num = 1;
-	else
-		priv->hw_params.rx_chains_num =
-			num_of_ant(priv->hw_params.valid_rx_ant);
-
-	iwl1000_set_ct_threshold(priv);
-
-	/* Set initial sensitivity parameters */
-	priv->hw_params.sens = &iwl1000_sensitivity;
-}
-
-static struct iwl_lib_ops iwl1000_lib = {
-	.set_hw_params = iwl1000_hw_set_hw_params,
-	.nic_config = iwl1000_nic_config,
-	.eeprom_ops = {
-		.regulatory_bands = {
-			EEPROM_REG_BAND_1_CHANNELS,
-			EEPROM_REG_BAND_2_CHANNELS,
-			EEPROM_REG_BAND_3_CHANNELS,
-			EEPROM_REG_BAND_4_CHANNELS,
-			EEPROM_REG_BAND_5_CHANNELS,
-			EEPROM_REG_BAND_24_HT40_CHANNELS,
-			EEPROM_REGULATORY_BAND_NO_HT40,
-		},
-	},
-	.temperature = iwlagn_temperature,
-};
-
 static const struct iwl_base_params iwl1000_base_params = {
 	.num_of_queues = IWLAGN_NUM_QUEUES,
 	.eeprom_size = OTP_LOW_IMAGE_SIZE,
@@ -185,7 +79,6 @@ static const struct iwl_ht_params iwl1000_ht_params = {
 	.max_data_size = IWLAGN_RTC_DATA_SIZE,			\
 	.eeprom_ver = EEPROM_1000_EEPROM_VERSION,		\
 	.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,	\
-	.lib = &iwl1000_lib,					\
 	.base_params = &iwl1000_base_params,			\
 	.led_mode = IWL_LED_BLINK
 
@@ -210,7 +103,6 @@ const struct iwl_cfg iwl1000_bg_cfg = {
 	.max_data_size = IWLAGN_RTC_DATA_SIZE,			\
 	.eeprom_ver = EEPROM_1000_EEPROM_VERSION,		\
 	.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,	\
-	.lib = &iwl1000_lib,					\
 	.base_params = &iwl1000_base_params,			\
 	.led_mode = IWL_LED_RF_STATE,				\
 	.rx_with_siso_diversity = true