iwlagn: hw_params moves to iwl_shared

Since it is used by all the layers, it needs to move to iwl_shared.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 11 insertions, 10 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
index 1789e3af810..f0e38a14053 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
@@ -93,7 +93,7 @@ int iwl_send_calib_results(struct iwl_priv *priv)
 	};
 
 	for (i = 0; i < IWL_CALIB_MAX; i++) {
-		if ((BIT(i) & priv->hw_params.calib_init_cfg) &&
+		if ((BIT(i) & hw_params(priv).calib_init_cfg) &&
 		    priv->calib_results[i].buf) {
 			hcmd.len[0] = priv->calib_results[i].buf_len;
 			hcmd.data[0] = priv->calib_results[i].buf;
@@ -174,7 +174,7 @@ static int iwl_sens_energy_cck(struct iwl_priv *priv,
 	u32 max_false_alarms = MAX_FA_CCK * rx_enable_time;
 	u32 min_false_alarms = MIN_FA_CCK * rx_enable_time;
 	struct iwl_sensitivity_data *data = NULL;
-	const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens;
+	const struct iwl_sensitivity_ranges *ranges = hw_params(priv).sens;
 
 	data = &(priv->sensitivity_data);
 
@@ -357,7 +357,7 @@ static int iwl_sens_auto_corr_ofdm(struct iwl_priv *priv,
 	u32 max_false_alarms = MAX_FA_OFDM * rx_enable_time;
 	u32 min_false_alarms = MIN_FA_OFDM * rx_enable_time;
 	struct iwl_sensitivity_data *data = NULL;
-	const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens;
+	const struct iwl_sensitivity_ranges *ranges = hw_params(priv).sens;
 
 	data = &(priv->sensitivity_data);
 
@@ -581,7 +581,7 @@ void iwl_init_sensitivity(struct iwl_priv *priv)
 	int ret = 0;
 	int i;
 	struct iwl_sensitivity_data *data = NULL;
-	const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens;
+	const struct iwl_sensitivity_ranges *ranges = hw_params(priv).sens;
 
 	if (priv->disable_sens_cal)
 		return;
@@ -821,21 +821,21 @@ static void iwl_find_disconn_antenna(struct iwl_priv *priv, u32* average_sig,
 	 * To be safe, simply mask out any chains that we know
 	 * are not on the device.
 	 */
-	active_chains &= priv->hw_params.valid_rx_ant;
+	active_chains &= hw_params(priv).valid_rx_ant;
 
 	num_tx_chains = 0;
 	for (i = 0; i < NUM_RX_CHAINS; i++) {
 		/* loops on all the bits of
 		 * priv->hw_setting.valid_tx_ant */
 		u8 ant_msk = (1 << i);
-		if (!(priv->hw_params.valid_tx_ant & ant_msk))
+		if (!(hw_params(priv).valid_tx_ant & ant_msk))
 			continue;
 
 		num_tx_chains++;
 		if (data->disconn_array[i] == 0)
 			/* there is a Tx antenna connected */
 			break;
-		if (num_tx_chains == priv->hw_params.tx_chains_num &&
+		if (num_tx_chains == hw_params(priv).tx_chains_num &&
 		    data->disconn_array[i]) {
 			/*
 			 * If all chains are disconnected
@@ -852,12 +852,13 @@ static void iwl_find_disconn_antenna(struct iwl_priv *priv, u32* average_sig,
 		}
 	}
 
-	if (active_chains != priv->hw_params.valid_rx_ant &&
+	if (active_chains != hw_params(priv).valid_rx_ant &&
 	    active_chains != priv->chain_noise_data.active_chains)
 		IWL_DEBUG_CALIB(priv,
 				"Detected that not all antennas are connected! "
 				"Connected: %#x, valid: %#x.\n",
-				active_chains, priv->hw_params.valid_rx_ant);
+				active_chains,
+				hw_params(priv).valid_rx_ant);
 
 	/* Save for use within RXON, TX, SCAN commands, etc. */
 	data->active_chains = active_chains;
@@ -1046,7 +1047,7 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv)
 	    priv->cfg->bt_params->advanced_bt_coexist) {
 		/* Disable disconnected antenna algorithm for advanced
 		   bt coex, assuming valid antennas are connected */
-		data->active_chains = priv->hw_params.valid_rx_ant;
+		data->active_chains = hw_params(priv).valid_rx_ant;
 		for (i = 0; i < NUM_RX_CHAINS; i++)
 			if (!(data->active_chains & (1<<i)))
 				data->disconn_array[i] = 1;