Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits)
  qlcnic: adding co maintainer
  ixgbe: add support for active DA cables
  ixgbe: dcb, do not tag tc_prio_control frames
  ixgbe: fix ixgbe_tx_is_paused logic
  ixgbe: always enable vlan strip/insert when DCB is enabled
  ixgbe: remove some redundant code in setting FCoE FIP filter
  ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp
  ixgbe: fix header len when unsplit packet overflows to data buffer
  ipv6: Never schedule DAD timer on dead address
  ipv6: Use POSTDAD state
  ipv6: Use state_lock to protect ifa state
  ipv6: Replace inet6_ifaddr->dead with state
  cxgb4: notify upper drivers if the device is already up when they load
  cxgb4: keep interrupts available when the ports are brought down
  cxgb4: fix initial addition of MAC address
  cnic: Return SPQ credit to bnx2x after ring setup and shutdown.
  cnic: Convert cnic_local_flags to atomic ops.
  can: Fix SJA1000 command register writes on SMP systems
  bridge: fix build for CONFIG_SYSFS disabled
  ARCNET: Limit com20020 PCI ID matches for SOHARD cards
  ...

Fix up various conflicts with pcmcia tree drivers/net/
{pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and
wireless/orinoco/spectrum_cs.c} and feature removal
(Documentation/feature-removal-schedule.txt).

Also fix a non-content conflict due to pm_qos_requirement getting
renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c

1 files changed, 307 insertions, 0 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-ict.c b/drivers/net/wireless/iwlwifi/iwl-agn-ict.c
new file mode 100644
index 00000000000..a273e373b7b
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-ict.c
@@ -0,0 +1,307 @@
+/******************************************************************************
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/etherdevice.h>
+#include <linux/sched.h>
+#include <net/mac80211.h>
+
+#include "iwl-dev.h"
+#include "iwl-core.h"
+#include "iwl-agn.h"
+#include "iwl-helpers.h"
+
+#define ICT_COUNT (PAGE_SIZE/sizeof(u32))
+
+/* Free dram table */
+void iwl_free_isr_ict(struct iwl_priv *priv)
+{
+	if (priv->_agn.ict_tbl_vir) {
+		dma_free_coherent(&priv->pci_dev->dev,
+				  (sizeof(u32) * ICT_COUNT) + PAGE_SIZE,
+				  priv->_agn.ict_tbl_vir,
+				  priv->_agn.ict_tbl_dma);
+		priv->_agn.ict_tbl_vir = NULL;
+	}
+}
+
+
+/* allocate dram shared table it is a PAGE_SIZE aligned
+ * also reset all data related to ICT table interrupt.
+ */
+int iwl_alloc_isr_ict(struct iwl_priv *priv)
+{
+
+	if (priv->cfg->use_isr_legacy)
+		return 0;
+	/* allocate shrared data table */
+	priv->_agn.ict_tbl_vir =
+		dma_alloc_coherent(&priv->pci_dev->dev,
+				   (sizeof(u32) * ICT_COUNT) + PAGE_SIZE,
+				   &priv->_agn.ict_tbl_dma, GFP_KERNEL);
+	if (!priv->_agn.ict_tbl_vir)
+		return -ENOMEM;
+
+	/* align table to PAGE_SIZE boundry */
+	priv->_agn.aligned_ict_tbl_dma = ALIGN(priv->_agn.ict_tbl_dma, PAGE_SIZE);
+
+	IWL_DEBUG_ISR(priv, "ict dma addr %Lx dma aligned %Lx diff %d\n",
+			     (unsigned long long)priv->_agn.ict_tbl_dma,
+			     (unsigned long long)priv->_agn.aligned_ict_tbl_dma,
+			(int)(priv->_agn.aligned_ict_tbl_dma - priv->_agn.ict_tbl_dma));
+
+	priv->_agn.ict_tbl =  priv->_agn.ict_tbl_vir +
+			  (priv->_agn.aligned_ict_tbl_dma - priv->_agn.ict_tbl_dma);
+
+	IWL_DEBUG_ISR(priv, "ict vir addr %p vir aligned %p diff %d\n",
+			     priv->_agn.ict_tbl, priv->_agn.ict_tbl_vir,
+			(int)(priv->_agn.aligned_ict_tbl_dma - priv->_agn.ict_tbl_dma));
+
+	/* reset table and index to all 0 */
+	memset(priv->_agn.ict_tbl_vir,0, (sizeof(u32) * ICT_COUNT) + PAGE_SIZE);
+	priv->_agn.ict_index = 0;
+
+	/* add periodic RX interrupt */
+	priv->inta_mask |= CSR_INT_BIT_RX_PERIODIC;
+	return 0;
+}
+
+/* Device is going up inform it about using ICT interrupt table,
+ * also we need to tell the driver to start using ICT interrupt.
+ */
+int iwl_reset_ict(struct iwl_priv *priv)
+{
+	u32 val;
+	unsigned long flags;
+
+	if (!priv->_agn.ict_tbl_vir)
+		return 0;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	iwl_disable_interrupts(priv);
+
+	memset(&priv->_agn.ict_tbl[0], 0, sizeof(u32) * ICT_COUNT);
+
+	val = priv->_agn.aligned_ict_tbl_dma >> PAGE_SHIFT;
+
+	val |= CSR_DRAM_INT_TBL_ENABLE;
+	val |= CSR_DRAM_INIT_TBL_WRAP_CHECK;
+
+	IWL_DEBUG_ISR(priv, "CSR_DRAM_INT_TBL_REG =0x%X "
+			"aligned dma address %Lx\n",
+			val, (unsigned long long)priv->_agn.aligned_ict_tbl_dma);
+
+	iwl_write32(priv, CSR_DRAM_INT_TBL_REG, val);
+	priv->_agn.use_ict = true;
+	priv->_agn.ict_index = 0;
+	iwl_write32(priv, CSR_INT, priv->inta_mask);
+	iwl_enable_interrupts(priv);
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+/* Device is going down disable ict interrupt usage */
+void iwl_disable_ict(struct iwl_priv *priv)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->_agn.use_ict = false;
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static irqreturn_t iwl_isr(int irq, void *data)
+{
+	struct iwl_priv *priv = data;
+	u32 inta, inta_mask;
+	unsigned long flags;
+#ifdef CONFIG_IWLWIFI_DEBUG
+	u32 inta_fh;
+#endif
+	if (!priv)
+		return IRQ_NONE;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	/* Disable (but don't clear!) interrupts here to avoid
+	 *    back-to-back ISRs and sporadic interrupts from our NIC.
+	 * If we have something to service, the tasklet will re-enable ints.
+	 * If we *don't* have something, we'll re-enable before leaving here. */
+	inta_mask = iwl_read32(priv, CSR_INT_MASK);  /* just for debug */
+	iwl_write32(priv, CSR_INT_MASK, 0x00000000);
+
+	/* Discover which interrupts are active/pending */
+	inta = iwl_read32(priv, CSR_INT);
+
+	/* Ignore interrupt if there's nothing in NIC to service.
+	 * This may be due to IRQ shared with another device,
+	 * or due to sporadic interrupts thrown from our NIC. */
+	if (!inta) {
+		IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0\n");
+		goto none;
+	}
+
+	if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
+		/* Hardware disappeared. It might have already raised
+		 * an interrupt */
+		IWL_WARN(priv, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
+		goto unplugged;
+	}
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
+		inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
+		IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, "
+			      "fh 0x%08x\n", inta, inta_mask, inta_fh);
+	}
+#endif
+
+	priv->_agn.inta |= inta;
+	/* iwl_irq_tasklet() will service interrupts and re-enable them */
+	if (likely(inta))
+		tasklet_schedule(&priv->irq_tasklet);
+	else if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->_agn.inta)
+		iwl_enable_interrupts(priv);
+
+ unplugged:
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return IRQ_HANDLED;
+
+ none:
+	/* re-enable interrupts here since we don't have anything to service. */
+	/* only Re-enable if diabled by irq  and no schedules tasklet. */
+	if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->_agn.inta)
+		iwl_enable_interrupts(priv);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return IRQ_NONE;
+}
+
+/* interrupt handler using ict table, with this interrupt driver will
+ * stop using INTA register to get device's interrupt, reading this register
+ * is expensive, device will write interrupts in ICT dram table, increment
+ * index then will fire interrupt to driver, driver will OR all ICT table
+ * entries from current index up to table entry with 0 value. the result is
+ * the interrupt we need to service, driver will set the entries back to 0 and
+ * set index.
+ */
+irqreturn_t iwl_isr_ict(int irq, void *data)
+{
+	struct iwl_priv *priv = data;
+	u32 inta, inta_mask;
+	u32 val = 0;
+	unsigned long flags;
+
+	if (!priv)
+		return IRQ_NONE;
+
+	/* dram interrupt table not set yet,
+	 * use legacy interrupt.
+	 */
+	if (!priv->_agn.use_ict)
+		return iwl_isr(irq, data);
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	/* Disable (but don't clear!) interrupts here to avoid
+	 * back-to-back ISRs and sporadic interrupts from our NIC.
+	 * If we have something to service, the tasklet will re-enable ints.
+	 * If we *don't* have something, we'll re-enable before leaving here.
+	 */
+	inta_mask = iwl_read32(priv, CSR_INT_MASK);  /* just for debug */
+	iwl_write32(priv, CSR_INT_MASK, 0x00000000);
+
+
+	/* Ignore interrupt if there's nothing in NIC to service.
+	 * This may be due to IRQ shared with another device,
+	 * or due to sporadic interrupts thrown from our NIC. */
+	if (!priv->_agn.ict_tbl[priv->_agn.ict_index]) {
+		IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0\n");
+		goto none;
+	}
+
+	/* read all entries that not 0 start with ict_index */
+	while (priv->_agn.ict_tbl[priv->_agn.ict_index]) {
+
+		val |= le32_to_cpu(priv->_agn.ict_tbl[priv->_agn.ict_index]);
+		IWL_DEBUG_ISR(priv, "ICT index %d value 0x%08X\n",
+				priv->_agn.ict_index,
+				le32_to_cpu(priv->_agn.ict_tbl[priv->_agn.ict_index]));
+		priv->_agn.ict_tbl[priv->_agn.ict_index] = 0;
+		priv->_agn.ict_index = iwl_queue_inc_wrap(priv->_agn.ict_index,
+						     ICT_COUNT);
+
+	}
+
+	/* We should not get this value, just ignore it. */
+	if (val == 0xffffffff)
+		val = 0;
+
+	/*
+	 * this is a w/a for a h/w bug. the h/w bug may cause the Rx bit
+	 * (bit 15 before shifting it to 31) to clear when using interrupt
+	 * coalescing. fortunately, bits 18 and 19 stay set when this happens
+	 * so we use them to decide on the real state of the Rx bit.
+	 * In order words, bit 15 is set if bit 18 or bit 19 are set.
+	 */
+	if (val & 0xC0000)
+		val |= 0x8000;
+
+	inta = (0xff & val) | ((0xff00 & val) << 16);
+	IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x ict 0x%08x\n",
+			inta, inta_mask, val);
+
+	inta &= priv->inta_mask;
+	priv->_agn.inta |= inta;
+
+	/* iwl_irq_tasklet() will service interrupts and re-enable them */
+	if (likely(inta))
+		tasklet_schedule(&priv->irq_tasklet);
+	else if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->_agn.inta) {
+		/* Allow interrupt if was disabled by this handler and
+		 * no tasklet was schedules, We should not enable interrupt,
+		 * tasklet will enable it.
+		 */
+		iwl_enable_interrupts(priv);
+	}
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return IRQ_HANDLED;
+
+ none:
+	/* re-enable interrupts here since we don't have anything to service.
+	 * only Re-enable if disabled by irq.
+	 */
+	if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->_agn.inta)
+		iwl_enable_interrupts(priv);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return IRQ_NONE;
+}