iwlagn: move iwlagn_stop_device to transport layer

Since iwlagn_stop_device was the only caller to the rx_stop / tx_stop,
these two don't need to be API any more.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.guy@intel.com>

1 files changed, 0 insertions, 39 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
index 4156316e108..e06a5c2f835 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
@@ -2166,42 +2166,3 @@ int iwlagn_start_device(struct iwl_priv *priv)
 	return 0;
 }
 
-void iwlagn_stop_device(struct iwl_priv *priv)
-{
-	unsigned long flags;
-
-	/* stop and reset the on-board processor */
-	iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
-
-	/* tell the device to stop sending interrupts */
-	spin_lock_irqsave(&priv->lock, flags);
-	iwl_disable_interrupts(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-	trans_sync_irq(priv);
-
-	/* device going down, Stop using ICT table */
-	iwl_disable_ict(priv);
-
-	/*
-	 * If a HW restart happens during firmware loading,
-	 * then the firmware loading might call this function
-	 * and later it might be called again due to the
-	 * restart. So don't process again if the device is
-	 * already dead.
-	 */
-	if (test_bit(STATUS_DEVICE_ENABLED, &priv->status)) {
-		trans_tx_stop(priv);
-		trans_rx_stop(priv);
-
-		/* Power-down device's busmaster DMA clocks */
-		iwl_write_prph(priv, APMG_CLK_DIS_REG,
-			       APMG_CLK_VAL_DMA_CLK_RQT);
-		udelay(5);
-	}
-
-	/* Make sure (redundant) we've released our request to stay awake */
-	iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
-
-	/* Stop the device, and put it in low power state */
-	iwl_apm_stop(priv);
-}