[IWLWIFI]: add iwlwifi wireless drivers

This patch adds the mac80211 based wireless drivers for the Intel
PRO/Wireless 3945ABG/BG Network Connection and Intel Wireless WiFi
Link AGN (4965) adapters.

[ Move driver into it's own directory -DaveM ]

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 229 insertions, 0 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
new file mode 100644
index 00000000000..0df41148ead
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -0,0 +1,229 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2005 - 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU Geeral Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2007 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *****************************************************************************/
+
+#ifndef	__iwl_prph_h__
+#define __iwl_prph_h__
+
+
+#define PRPH_BASE	(0x00000)
+#define PRPH_END	(0xFFFFF)
+
+/* APMG (power management) constants */
+#define APMG_BASE			(PRPH_BASE + 0x3000)
+#define APMG_CLK_CTRL_REG		(APMG_BASE + 0x0000)
+#define APMG_CLK_EN_REG			(APMG_BASE + 0x0004)
+#define APMG_CLK_DIS_REG		(APMG_BASE + 0x0008)
+#define APMG_PS_CTRL_REG		(APMG_BASE + 0x000c)
+#define APMG_PCIDEV_STT_REG		(APMG_BASE + 0x0010)
+#define APMG_RFKILL_REG			(APMG_BASE + 0x0014)
+#define APMG_RTC_INT_STT_REG		(APMG_BASE + 0x001c)
+#define APMG_RTC_INT_MSK_REG		(APMG_BASE + 0x0020)
+
+#define APMG_CLK_VAL_DMA_CLK_RQT	(0x00000200)
+#define APMG_CLK_VAL_BSM_CLK_RQT	(0x00000800)
+
+#define APMG_PS_CTRL_VAL_RESET_REQ	(0x04000000)
+
+#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS	(0x00000800)
+
+#define APMG_PS_CTRL_MSK_PWR_SRC              (0x03000000)
+#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN        (0x00000000)
+#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX         (0x01000000)
+
+
+/**
+ * BSM (Bootstrap State Machine)
+ *
+ * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
+ * in special SRAM that does not power down when the embedded control
+ * processor is sleeping (e.g. for periodic power-saving shutdowns of radio).
+ *
+ * When powering back up after sleeps (or during initial uCode load), the BSM
+ * internally loads the short bootstrap program from the special SRAM into the
+ * embedded processor's instruction SRAM, and starts the processor so it runs
+ * the bootstrap program.
+ *
+ * This bootstrap program loads (via PCI busmaster DMA) instructions and data
+ * images for a uCode program from host DRAM locations.  The host driver
+ * indicates DRAM locations and sizes for instruction and data images via the
+ * four BSM_DRAM_* registers.  Once the bootstrap program loads the new program,
+ * the new program starts automatically.
+ *
+ * The uCode used for open-source drivers includes two programs:
+ *
+ * 1)  Initialization -- performs hardware calibration and sets up some
+ *     internal data, then notifies host via "initialize alive" notification
+ *     (struct iwl_init_alive_resp) that it has completed all of its work.
+ *     After signal from host, it then loads and starts the runtime program.
+ *     The initialization program must be used when initially setting up the
+ *     NIC after loading the driver.
+ *
+ * 2)  Runtime/Protocol -- performs all normal runtime operations.  This
+ *     notifies host via "alive" notification (struct iwl_alive_resp) that it
+ *     is ready to be used.
+ *
+ * When initializing the NIC, the host driver does the following procedure:
+ *
+ * 1)  Load bootstrap program (instructions only, no data image for bootstrap)
+ *     into bootstrap memory.  Use dword writes starting at BSM_SRAM_LOWER_BOUND
+ *
+ * 2)  Point (via BSM_DRAM_*) to the "initialize" uCode data and instruction
+ *     images in host DRAM.
+ *
+ * 3)  Set up BSM to copy from BSM SRAM into uCode instruction SRAM when asked:
+ *     BSM_WR_MEM_SRC_REG = 0
+ *     BSM_WR_MEM_DST_REG = RTC_INST_LOWER_BOUND
+ *     BSM_WR_MEM_DWCOUNT_REG = # dwords in bootstrap instruction image
+ *
+ * 4)  Load bootstrap into instruction SRAM:
+ *     BSM_WR_CTRL_REG = BSM_WR_CTRL_REG_BIT_START
+ *
+ * 5)  Wait for load completion:
+ *     Poll BSM_WR_CTRL_REG for BSM_WR_CTRL_REG_BIT_START = 0
+ *
+ * 6)  Enable future boot loads whenever NIC's power management triggers it:
+ *     BSM_WR_CTRL_REG = BSM_WR_CTRL_REG_BIT_START_EN
+ *
+ * 7)  Start the NIC by removing all reset bits:
+ *     CSR_RESET = 0
+ *
+ *     The bootstrap uCode (already in instruction SRAM) loads initialization
+ *     uCode.  Initialization uCode performs data initialization, sends
+ *     "initialize alive" notification to host, and waits for a signal from
+ *     host to load runtime code.
+ *
+ * 4)  Point (via BSM_DRAM_*) to the "runtime" uCode data and instruction
+ *     images in host DRAM.  The last register loaded must be the instruction
+ *     bytecount register ("1" in MSbit tells initialization uCode to load
+ *     the runtime uCode):
+ *     BSM_DRAM_INST_BYTECOUNT_REG = bytecount | BSM_DRAM_INST_LOAD
+ *
+ * 5)  Wait for "alive" notification, then issue normal runtime commands.
+ *
+ * Data caching during power-downs:
+ *
+ * Just before the embedded controller powers down (e.g for automatic
+ * power-saving modes, or for RFKILL), uCode stores (via PCI busmaster DMA)
+ * a current snapshot of the embedded processor's data SRAM into host DRAM.
+ * This caches the data while the embedded processor's memory is powered down.
+ * Location and size are controlled by BSM_DRAM_DATA_* registers.
+ *
+ * NOTE:  Instruction SRAM does not need to be saved, since that doesn't
+ *        change during operation; the original image (from uCode distribution
+ *        file) can be used for reload.
+ *
+ * When powering back up, the BSM loads the bootstrap program.  Bootstrap looks
+ * at the BSM_DRAM_* registers, which now point to the runtime instruction
+ * image and the cached (modified) runtime data (*not* the initialization
+ * uCode).  Bootstrap reloads these runtime images into SRAM, and restarts the
+ * uCode from where it left off before the power-down.
+ *
+ * NOTE:  Initialization uCode does *not* run as part of the save/restore
+ *        procedure.
+ *
+ * This save/restore method is mostly for autonomous power management during
+ * normal operation (result of POWER_TABLE_CMD).  Platform suspend/resume and
+ * RFKILL should use complete restarts (with total re-initialization) of uCode,
+ * allowing total shutdown (including BSM memory).
+ *
+ * Note that, during normal operation, the host DRAM that held the initial
+ * startup data for the runtime code is now being used as a backup data cache
+ * for modified data!  If you need to completely re-initialize the NIC, make
+ * sure that you use the runtime data image from the uCode distribution file,
+ * not the modified/saved runtime data.  You may want to store a separate
+ * "clean" runtime data image in DRAM to avoid disk reads of distribution file.
+ */
+
+/* BSM bit fields */
+#define BSM_WR_CTRL_REG_BIT_START     (0x80000000) /* start boot load now */
+#define BSM_WR_CTRL_REG_BIT_START_EN  (0x40000000) /* enable boot after pwrup*/
+#define BSM_DRAM_INST_LOAD            (0x80000000) /* start program load now */
+
+/* BSM addresses */
+#define BSM_BASE                     (PRPH_BASE + 0x3400)
+#define BSM_END                      (PRPH_BASE + 0x3800)
+
+#define BSM_WR_CTRL_REG              (BSM_BASE + 0x000) /* ctl and status */
+#define BSM_WR_MEM_SRC_REG           (BSM_BASE + 0x004) /* source in BSM mem */
+#define BSM_WR_MEM_DST_REG           (BSM_BASE + 0x008) /* dest in SRAM mem */
+#define BSM_WR_DWCOUNT_REG           (BSM_BASE + 0x00C) /* bytes */
+#define BSM_WR_STATUS_REG            (BSM_BASE + 0x010) /* bit 0:  1 == done */
+
+/*
+ * Pointers and size regs for bootstrap load and data SRAM save/restore.
+ * NOTE:  3945 pointers use bits 31:0 of DRAM address.
+ *        4965 pointers use bits 35:4 of DRAM address.
+ */
+#define BSM_DRAM_INST_PTR_REG        (BSM_BASE + 0x090)
+#define BSM_DRAM_INST_BYTECOUNT_REG  (BSM_BASE + 0x094)
+#define BSM_DRAM_DATA_PTR_REG        (BSM_BASE + 0x098)
+#define BSM_DRAM_DATA_BYTECOUNT_REG  (BSM_BASE + 0x09C)
+
+/*
+ * BSM special memory, stays powered on during power-save sleeps.
+ * Read/write, address range from LOWER_BOUND to (LOWER_BOUND + SIZE -1)
+ */
+#define BSM_SRAM_LOWER_BOUND         (PRPH_BASE + 0x3800)
+#define BSM_SRAM_SIZE			(1024) /* bytes */
+
+
+#endif				/* __iwl_prph_h__ */