Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits)
  qlcnic: adding co maintainer
  ixgbe: add support for active DA cables
  ixgbe: dcb, do not tag tc_prio_control frames
  ixgbe: fix ixgbe_tx_is_paused logic
  ixgbe: always enable vlan strip/insert when DCB is enabled
  ixgbe: remove some redundant code in setting FCoE FIP filter
  ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp
  ixgbe: fix header len when unsplit packet overflows to data buffer
  ipv6: Never schedule DAD timer on dead address
  ipv6: Use POSTDAD state
  ipv6: Use state_lock to protect ifa state
  ipv6: Replace inet6_ifaddr->dead with state
  cxgb4: notify upper drivers if the device is already up when they load
  cxgb4: keep interrupts available when the ports are brought down
  cxgb4: fix initial addition of MAC address
  cnic: Return SPQ credit to bnx2x after ring setup and shutdown.
  cnic: Convert cnic_local_flags to atomic ops.
  can: Fix SJA1000 command register writes on SMP systems
  bridge: fix build for CONFIG_SYSFS disabled
  ARCNET: Limit com20020 PCI ID matches for SOHARD cards
  ...

Fix up various conflicts with pcmcia tree drivers/net/
{pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and
wireless/orinoco/spectrum_cs.c} and feature removal
(Documentation/feature-removal-schedule.txt).

Also fix a non-content conflict due to pm_qos_requirement getting
renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c

1 files changed, 77 insertions, 749 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index e5eb339107d..0a5d7cf2519 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -163,197 +163,6 @@ void iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl_rx_queue *q
 	spin_unlock_irqrestore(&q->lock, flags);
 }
 EXPORT_SYMBOL(iwl_rx_queue_update_write_ptr);
-/**
- * iwl_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
- */
-static inline __le32 iwl_dma_addr2rbd_ptr(struct iwl_priv *priv,
-					  dma_addr_t dma_addr)
-{
-	return cpu_to_le32((u32)(dma_addr >> 8));
-}
-
-/**
- * iwl_rx_queue_restock - refill RX queue from pre-allocated pool
- *
- * If there are slots in the RX queue that need to be restocked,
- * and we have free pre-allocated buffers, fill the ranks as much
- * as we can, pulling from rx_free.
- *
- * This moves the 'write' index forward to catch up with 'processed', and
- * also updates the memory address in the firmware to reference the new
- * target buffer.
- */
-void iwl_rx_queue_restock(struct iwl_priv *priv)
-{
-	struct iwl_rx_queue *rxq = &priv->rxq;
-	struct list_head *element;
-	struct iwl_rx_mem_buffer *rxb;
-	unsigned long flags;
-	int write;
-
-	spin_lock_irqsave(&rxq->lock, flags);
-	write = rxq->write & ~0x7;
-	while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
-		/* Get next free Rx buffer, remove from free list */
-		element = rxq->rx_free.next;
-		rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
-		list_del(element);
-
-		/* Point to Rx buffer via next RBD in circular buffer */
-		rxq->bd[rxq->write] = iwl_dma_addr2rbd_ptr(priv, rxb->page_dma);
-		rxq->queue[rxq->write] = rxb;
-		rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
-		rxq->free_count--;
-	}
-	spin_unlock_irqrestore(&rxq->lock, flags);
-	/* If the pre-allocated buffer pool is dropping low, schedule to
-	 * refill it */
-	if (rxq->free_count <= RX_LOW_WATERMARK)
-		queue_work(priv->workqueue, &priv->rx_replenish);
-
-
-	/* If we've added more space for the firmware to place data, tell it.
-	 * Increment device's write pointer in multiples of 8. */
-	if (rxq->write_actual != (rxq->write & ~0x7)) {
-		spin_lock_irqsave(&rxq->lock, flags);
-		rxq->need_update = 1;
-		spin_unlock_irqrestore(&rxq->lock, flags);
-		iwl_rx_queue_update_write_ptr(priv, rxq);
-	}
-}
-EXPORT_SYMBOL(iwl_rx_queue_restock);
-
-
-/**
- * iwl_rx_replenish - Move all used packet from rx_used to rx_free
- *
- * When moving to rx_free an SKB is allocated for the slot.
- *
- * Also restock the Rx queue via iwl_rx_queue_restock.
- * This is called as a scheduled work item (except for during initialization)
- */
-void iwl_rx_allocate(struct iwl_priv *priv, gfp_t priority)
-{
-	struct iwl_rx_queue *rxq = &priv->rxq;
-	struct list_head *element;
-	struct iwl_rx_mem_buffer *rxb;
-	struct page *page;
-	unsigned long flags;
-	gfp_t gfp_mask = priority;
-
-	while (1) {
-		spin_lock_irqsave(&rxq->lock, flags);
-		if (list_empty(&rxq->rx_used)) {
-			spin_unlock_irqrestore(&rxq->lock, flags);
-			return;
-		}
-		spin_unlock_irqrestore(&rxq->lock, flags);
-
-		if (rxq->free_count > RX_LOW_WATERMARK)
-			gfp_mask |= __GFP_NOWARN;
-
-		if (priv->hw_params.rx_page_order > 0)
-			gfp_mask |= __GFP_COMP;
-
-		/* Alloc a new receive buffer */
-		page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order);
-		if (!page) {
-			if (net_ratelimit())
-				IWL_DEBUG_INFO(priv, "alloc_pages failed, "
-					       "order: %d\n",
-					       priv->hw_params.rx_page_order);
-
-			if ((rxq->free_count <= RX_LOW_WATERMARK) &&
-			    net_ratelimit())
-				IWL_CRIT(priv, "Failed to alloc_pages with %s. Only %u free buffers remaining.\n",
-					 priority == GFP_ATOMIC ?  "GFP_ATOMIC" : "GFP_KERNEL",
-					 rxq->free_count);
-			/* We don't reschedule replenish work here -- we will
-			 * call the restock method and if it still needs
-			 * more buffers it will schedule replenish */
-			return;
-		}
-
-		spin_lock_irqsave(&rxq->lock, flags);
-
-		if (list_empty(&rxq->rx_used)) {
-			spin_unlock_irqrestore(&rxq->lock, flags);
-			__free_pages(page, priv->hw_params.rx_page_order);
-			return;
-		}
-		element = rxq->rx_used.next;
-		rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
-		list_del(element);
-
-		spin_unlock_irqrestore(&rxq->lock, flags);
-
-		rxb->page = page;
-		/* Get physical address of the RB */
-		rxb->page_dma = pci_map_page(priv->pci_dev, page, 0,
-				PAGE_SIZE << priv->hw_params.rx_page_order,
-				PCI_DMA_FROMDEVICE);
-		/* dma address must be no more than 36 bits */
-		BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36));
-		/* and also 256 byte aligned! */
-		BUG_ON(rxb->page_dma & DMA_BIT_MASK(8));
-
-		spin_lock_irqsave(&rxq->lock, flags);
-
-		list_add_tail(&rxb->list, &rxq->rx_free);
-		rxq->free_count++;
-		priv->alloc_rxb_page++;
-
-		spin_unlock_irqrestore(&rxq->lock, flags);
-	}
-}
-
-void iwl_rx_replenish(struct iwl_priv *priv)
-{
-	unsigned long flags;
-
-	iwl_rx_allocate(priv, GFP_KERNEL);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	iwl_rx_queue_restock(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-}
-EXPORT_SYMBOL(iwl_rx_replenish);
-
-void iwl_rx_replenish_now(struct iwl_priv *priv)
-{
-	iwl_rx_allocate(priv, GFP_ATOMIC);
-
-	iwl_rx_queue_restock(priv);
-}
-EXPORT_SYMBOL(iwl_rx_replenish_now);
-
-
-/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
- * If an SKB has been detached, the POOL needs to have its SKB set to NULL
- * This free routine walks the list of POOL entries and if SKB is set to
- * non NULL it is unmapped and freed
- */
-void iwl_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
-{
-	int i;
-	for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
-		if (rxq->pool[i].page != NULL) {
-			pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
-				PAGE_SIZE << priv->hw_params.rx_page_order,
-				PCI_DMA_FROMDEVICE);
-			__iwl_free_pages(priv, rxq->pool[i].page);
-			rxq->pool[i].page = NULL;
-		}
-	}
-
-	dma_free_coherent(&priv->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
-			  rxq->dma_addr);
-	dma_free_coherent(&priv->pci_dev->dev, sizeof(struct iwl_rb_status),
-			  rxq->rb_stts, rxq->rb_stts_dma);
-	rxq->bd = NULL;
-	rxq->rb_stts  = NULL;
-}
-EXPORT_SYMBOL(iwl_rx_queue_free);
 
 int iwl_rx_queue_alloc(struct iwl_priv *priv)
 {
@@ -396,98 +205,6 @@ err_bd:
 }
 EXPORT_SYMBOL(iwl_rx_queue_alloc);
 
-void iwl_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
-{
-	unsigned long flags;
-	int i;
-	spin_lock_irqsave(&rxq->lock, flags);
-	INIT_LIST_HEAD(&rxq->rx_free);
-	INIT_LIST_HEAD(&rxq->rx_used);
-	/* Fill the rx_used queue with _all_ of the Rx buffers */
-	for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
-		/* In the reset function, these buffers may have been allocated
-		 * to an SKB, so we need to unmap and free potential storage */
-		if (rxq->pool[i].page != NULL) {
-			pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
-				PAGE_SIZE << priv->hw_params.rx_page_order,
-				PCI_DMA_FROMDEVICE);
-			__iwl_free_pages(priv, rxq->pool[i].page);
-			rxq->pool[i].page = NULL;
-		}
-		list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
-	}
-
-	/* Set us so that we have processed and used all buffers, but have
-	 * not restocked the Rx queue with fresh buffers */
-	rxq->read = rxq->write = 0;
-	rxq->write_actual = 0;
-	rxq->free_count = 0;
-	spin_unlock_irqrestore(&rxq->lock, flags);
-}
-
-int iwl_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
-{
-	u32 rb_size;
-	const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */
-	u32 rb_timeout = 0; /* FIXME: RX_RB_TIMEOUT for all devices? */
-
-	if (!priv->cfg->use_isr_legacy)
-		rb_timeout = RX_RB_TIMEOUT;
-
-	if (priv->cfg->mod_params->amsdu_size_8K)
-		rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;
-	else
-		rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K;
-
-	/* Stop Rx DMA */
-	iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
-
-	/* Reset driver's Rx queue write index */
-	iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0);
-
-	/* Tell device where to find RBD circular buffer in DRAM */
-	iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG,
-			   (u32)(rxq->dma_addr >> 8));
-
-	/* Tell device where in DRAM to update its Rx status */
-	iwl_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG,
-			   rxq->rb_stts_dma >> 4);
-
-	/* Enable Rx DMA
-	 * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set because of HW bug in
-	 *      the credit mechanism in 5000 HW RX FIFO
-	 * Direct rx interrupts to hosts
-	 * Rx buffer size 4 or 8k
-	 * RB timeout 0x10
-	 * 256 RBDs
-	 */
-	iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG,
-			   FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
-			   FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY |
-			   FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
-			   FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK |
-			   rb_size|
-			   (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)|
-			   (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
-
-	/* Set interrupt coalescing timer to default (2048 usecs) */
-	iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_TIMEOUT_DEF);
-
-	return 0;
-}
-
-int iwl_rxq_stop(struct iwl_priv *priv)
-{
-
-	/* stop Rx DMA */
-	iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
-	iwl_poll_direct_bit(priv, FH_MEM_RSSR_RX_STATUS_REG,
-			    FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
-
-	return 0;
-}
-EXPORT_SYMBOL(iwl_rxq_stop);
-
 void iwl_rx_missed_beacon_notif(struct iwl_priv *priv,
 				struct iwl_rx_mem_buffer *rxb)
 
@@ -543,6 +260,7 @@ static void iwl_rx_calc_noise(struct iwl_priv *priv)
 		le32_to_cpu(rx_info->beacon_silence_rssi_b) & IN_BAND_FILTER;
 	int bcn_silence_c =
 		le32_to_cpu(rx_info->beacon_silence_rssi_c) & IN_BAND_FILTER;
+	int last_rx_noise;
 
 	if (bcn_silence_a) {
 		total_silence += bcn_silence_a;
@@ -559,13 +277,13 @@ static void iwl_rx_calc_noise(struct iwl_priv *priv)
 
 	/* Average among active antennas */
 	if (num_active_rx)
-		priv->last_rx_noise = (total_silence / num_active_rx) - 107;
+		last_rx_noise = (total_silence / num_active_rx) - 107;
 	else
-		priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
+		last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
 
 	IWL_DEBUG_CALIB(priv, "inband silence a %u, b %u, c %u, dBm %d\n",
 			bcn_silence_a, bcn_silence_b, bcn_silence_c,
-			priv->last_rx_noise);
+			last_rx_noise);
 }
 
 #ifdef CONFIG_IWLWIFI_DEBUG
@@ -617,29 +335,20 @@ static void iwl_accumulative_statistics(struct iwl_priv *priv,
 
 #define REG_RECALIB_PERIOD (60)
 
-#define PLCP_MSG "plcp_err exceeded %u, %u, %u, %u, %u, %d, %u mSecs\n"
-void iwl_rx_statistics(struct iwl_priv *priv,
-			      struct iwl_rx_mem_buffer *rxb)
+/**
+ * iwl_good_plcp_health - checks for plcp error.
+ *
+ * When the plcp error is exceeding the thresholds, reset the radio
+ * to improve the throughput.
+ */
+bool iwl_good_plcp_health(struct iwl_priv *priv,
+				struct iwl_rx_packet *pkt)
 {
-	int change;
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	bool rc = true;
 	int combined_plcp_delta;
 	unsigned int plcp_msec;
 	unsigned long plcp_received_jiffies;
 
-	IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n",
-		     (int)sizeof(priv->statistics),
-		     le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
-
-	change = ((priv->statistics.general.temperature !=
-		   pkt->u.stats.general.temperature) ||
-		  ((priv->statistics.flag &
-		    STATISTICS_REPLY_FLG_HT40_MODE_MSK) !=
-		   (pkt->u.stats.flag & STATISTICS_REPLY_FLG_HT40_MODE_MSK)));
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-	iwl_accumulative_statistics(priv, (__le32 *)&pkt->u.stats);
-#endif
 	/*
 	 * check for plcp_err and trigger radio reset if it exceeds
 	 * the plcp error threshold plcp_delta.
@@ -660,11 +369,11 @@ void iwl_rx_statistics(struct iwl_priv *priv,
 			le32_to_cpu(priv->statistics.rx.ofdm_ht.plcp_err));
 
 		if ((combined_plcp_delta > 0) &&
-			((combined_plcp_delta * 100) / plcp_msec) >
+		    ((combined_plcp_delta * 100) / plcp_msec) >
 			priv->cfg->plcp_delta_threshold) {
 			/*
-			 * if plcp_err exceed the threshold, the following
-			 * data is printed in csv format:
+			 * if plcp_err exceed the threshold,
+			 * the following data is printed in csv format:
 			 *    Text: plcp_err exceeded %d,
 			 *    Received ofdm.plcp_err,
 			 *    Current ofdm.plcp_err,
@@ -673,22 +382,76 @@ void iwl_rx_statistics(struct iwl_priv *priv,
 			 *    combined_plcp_delta,
 			 *    plcp_msec
 			 */
-			IWL_DEBUG_RADIO(priv, PLCP_MSG,
+			IWL_DEBUG_RADIO(priv, "plcp_err exceeded %u, "
+				"%u, %u, %u, %u, %d, %u mSecs\n",
 				priv->cfg->plcp_delta_threshold,
 				le32_to_cpu(pkt->u.stats.rx.ofdm.plcp_err),
 				le32_to_cpu(priv->statistics.rx.ofdm.plcp_err),
 				le32_to_cpu(pkt->u.stats.rx.ofdm_ht.plcp_err),
 				le32_to_cpu(
-					priv->statistics.rx.ofdm_ht.plcp_err),
+				  priv->statistics.rx.ofdm_ht.plcp_err),
 				combined_plcp_delta, plcp_msec);
+			rc = false;
+		}
+	}
+	return rc;
+}
+EXPORT_SYMBOL(iwl_good_plcp_health);
 
-			/*
-			 * Reset the RF radio due to the high plcp
-			 * error rate
-			 */
-			iwl_force_reset(priv, IWL_RF_RESET);
+void iwl_recover_from_statistics(struct iwl_priv *priv,
+				struct iwl_rx_packet *pkt)
+{
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+	if (iwl_is_associated(priv)) {
+		if (priv->cfg->ops->lib->check_ack_health) {
+			if (!priv->cfg->ops->lib->check_ack_health(
+			    priv, pkt)) {
+				/*
+				 * low ack count detected
+				 * restart Firmware
+				 */
+				IWL_ERR(priv, "low ack count detected, "
+					"restart firmware\n");
+				if (!iwl_force_reset(priv, IWL_FW_RESET))
+					return;
+			}
+		}
+		if (priv->cfg->ops->lib->check_plcp_health) {
+			if (!priv->cfg->ops->lib->check_plcp_health(
+			    priv, pkt)) {
+				/*
+				 * high plcp error detected
+				 * reset Radio
+				 */
+				iwl_force_reset(priv, IWL_RF_RESET);
+			}
 		}
 	}
+}
+EXPORT_SYMBOL(iwl_recover_from_statistics);
+
+void iwl_rx_statistics(struct iwl_priv *priv,
+			      struct iwl_rx_mem_buffer *rxb)
+{
+	int change;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+
+
+	IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n",
+		     (int)sizeof(priv->statistics),
+		     le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
+
+	change = ((priv->statistics.general.temperature !=
+		   pkt->u.stats.general.temperature) ||
+		  ((priv->statistics.flag &
+		    STATISTICS_REPLY_FLG_HT40_MODE_MSK) !=
+		   (pkt->u.stats.flag & STATISTICS_REPLY_FLG_HT40_MODE_MSK)));
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	iwl_accumulative_statistics(priv, (__le32 *)&pkt->u.stats);
+#endif
+	iwl_recover_from_statistics(priv, pkt);
 
 	memcpy(&priv->statistics, &pkt->u.stats, sizeof(priv->statistics));
 
@@ -731,139 +494,6 @@ void iwl_reply_statistics(struct iwl_priv *priv,
 }
 EXPORT_SYMBOL(iwl_reply_statistics);
 
-/* Calc max signal level (dBm) among 3 possible receivers */
-static inline int iwl_calc_rssi(struct iwl_priv *priv,
-				struct iwl_rx_phy_res *rx_resp)
-{
-	return priv->cfg->ops->utils->calc_rssi(priv, rx_resp);
-}
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-/**
- * iwl_dbg_report_frame - dump frame to syslog during debug sessions
- *
- * You may hack this function to show different aspects of received frames,
- * including selective frame dumps.
- * group100 parameter selects whether to show 1 out of 100 good data frames.
- *    All beacon and probe response frames are printed.
- */
-static void iwl_dbg_report_frame(struct iwl_priv *priv,
-		      struct iwl_rx_phy_res *phy_res, u16 length,
-		      struct ieee80211_hdr *header, int group100)
-{
-	u32 to_us;
-	u32 print_summary = 0;
-	u32 print_dump = 0;	/* set to 1 to dump all frames' contents */
-	u32 hundred = 0;
-	u32 dataframe = 0;
-	__le16 fc;
-	u16 seq_ctl;
-	u16 channel;
-	u16 phy_flags;
-	u32 rate_n_flags;
-	u32 tsf_low;
-	int rssi;
-
-	if (likely(!(iwl_get_debug_level(priv) & IWL_DL_RX)))
-		return;
-
-	/* MAC header */
-	fc = header->frame_control;
-	seq_ctl = le16_to_cpu(header->seq_ctrl);
-
-	/* metadata */
-	channel = le16_to_cpu(phy_res->channel);
-	phy_flags = le16_to_cpu(phy_res->phy_flags);
-	rate_n_flags = le32_to_cpu(phy_res->rate_n_flags);
-
-	/* signal statistics */
-	rssi = iwl_calc_rssi(priv, phy_res);
-	tsf_low = le64_to_cpu(phy_res->timestamp) & 0x0ffffffff;
-
-	to_us = !compare_ether_addr(header->addr1, priv->mac_addr);
-
-	/* if data frame is to us and all is good,
-	 *   (optionally) print summary for only 1 out of every 100 */
-	if (to_us && (fc & ~cpu_to_le16(IEEE80211_FCTL_PROTECTED)) ==
-	    cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FTYPE_DATA)) {
-		dataframe = 1;
-		if (!group100)
-			print_summary = 1;	/* print each frame */
-		else if (priv->framecnt_to_us < 100) {
-			priv->framecnt_to_us++;
-			print_summary = 0;
-		} else {
-			priv->framecnt_to_us = 0;
-			print_summary = 1;
-			hundred = 1;
-		}
-	} else {
-		/* print summary for all other frames */
-		print_summary = 1;
-	}
-
-	if (print_summary) {
-		char *title;
-		int rate_idx;
-		u32 bitrate;
-
-		if (hundred)
-			title = "100Frames";
-		else if (ieee80211_has_retry(fc))
-			title = "Retry";
-		else if (ieee80211_is_assoc_resp(fc))
-			title = "AscRsp";
-		else if (ieee80211_is_reassoc_resp(fc))
-			title = "RasRsp";
-		else if (ieee80211_is_probe_resp(fc)) {
-			title = "PrbRsp";
-			print_dump = 1;	/* dump frame contents */
-		} else if (ieee80211_is_beacon(fc)) {
-			title = "Beacon";
-			print_dump = 1;	/* dump frame contents */
-		} else if (ieee80211_is_atim(fc))
-			title = "ATIM";
-		else if (ieee80211_is_auth(fc))
-			title = "Auth";
-		else if (ieee80211_is_deauth(fc))
-			title = "DeAuth";
-		else if (ieee80211_is_disassoc(fc))
-			title = "DisAssoc";
-		else
-			title = "Frame";
-
-		rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags);
-		if (unlikely((rate_idx < 0) || (rate_idx >= IWL_RATE_COUNT))) {
-			bitrate = 0;
-			WARN_ON_ONCE(1);
-		} else {
-			bitrate = iwl_rates[rate_idx].ieee / 2;
-		}
-
-		/* print frame summary.
-		 * MAC addresses show just the last byte (for brevity),
-		 *    but you can hack it to show more, if you'd like to. */
-		if (dataframe)
-			IWL_DEBUG_RX(priv, "%s: mhd=0x%04x, dst=0x%02x, "
-				     "len=%u, rssi=%d, chnl=%d, rate=%u, \n",
-				     title, le16_to_cpu(fc), header->addr1[5],
-				     length, rssi, channel, bitrate);
-		else {
-			/* src/dst addresses assume managed mode */
-			IWL_DEBUG_RX(priv, "%s: 0x%04x, dst=0x%02x, src=0x%02x, "
-				     "len=%u, rssi=%d, tim=%lu usec, "
-				     "phy=0x%02x, chnl=%d\n",
-				     title, le16_to_cpu(fc), header->addr1[5],
-				     header->addr3[5], length, rssi,
-				     tsf_low - priv->scan_start_tsf,
-				     phy_flags, channel);
-		}
-	}
-	if (print_dump)
-		iwl_print_hex_dump(priv, IWL_DL_RX, header, length);
-}
-#endif
-
 /*
  * returns non-zero if packet should be dropped
  */
@@ -911,305 +541,3 @@ int iwl_set_decrypted_flag(struct iwl_priv *priv,
 	return 0;
 }
 EXPORT_SYMBOL(iwl_set_decrypted_flag);
-
-static u32 iwl_translate_rx_status(struct iwl_priv *priv, u32 decrypt_in)
-{
-	u32 decrypt_out = 0;
-
-	if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) ==
-					RX_RES_STATUS_STATION_FOUND)
-		decrypt_out |= (RX_RES_STATUS_STATION_FOUND |
-				RX_RES_STATUS_NO_STATION_INFO_MISMATCH);
-
-	decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK);
-
-	/* packet was not encrypted */
-	if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
-					RX_RES_STATUS_SEC_TYPE_NONE)
-		return decrypt_out;
-
-	/* packet was encrypted with unknown alg */
-	if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
-					RX_RES_STATUS_SEC_TYPE_ERR)
-		return decrypt_out;
-
-	/* decryption was not done in HW */
-	if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) !=
-					RX_MPDU_RES_STATUS_DEC_DONE_MSK)
-		return decrypt_out;
-
-	switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) {
-
-	case RX_RES_STATUS_SEC_TYPE_CCMP:
-		/* alg is CCM: check MIC only */
-		if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK))
-			/* Bad MIC */
-			decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
-		else
-			decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
-
-		break;
-
-	case RX_RES_STATUS_SEC_TYPE_TKIP:
-		if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) {
-			/* Bad TTAK */
-			decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK;
-			break;
-		}
-		/* fall through if TTAK OK */
-	default:
-		if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK))
-			decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
-		else
-			decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
-		break;
-	};
-
-	IWL_DEBUG_RX(priv, "decrypt_in:0x%x  decrypt_out = 0x%x\n",
-					decrypt_in, decrypt_out);
-
-	return decrypt_out;
-}
-
-static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv,
-					struct ieee80211_hdr *hdr,
-					u16 len,
-					u32 ampdu_status,
-					struct iwl_rx_mem_buffer *rxb,
-					struct ieee80211_rx_status *stats)
-{
-	struct sk_buff *skb;
-	int ret = 0;
-	__le16 fc = hdr->frame_control;
-
-	/* We only process data packets if the interface is open */
-	if (unlikely(!priv->is_open)) {
-		IWL_DEBUG_DROP_LIMIT(priv,
-		    "Dropping packet while interface is not open.\n");
-		return;
-	}
-
-	/* In case of HW accelerated crypto and bad decryption, drop */
-	if (!priv->cfg->mod_params->sw_crypto &&
-	    iwl_set_decrypted_flag(priv, hdr, ampdu_status, stats))
-		return;
-
-	skb = alloc_skb(IWL_LINK_HDR_MAX * 2, GFP_ATOMIC);
-	if (!skb) {
-		IWL_ERR(priv, "alloc_skb failed\n");
-		return;
-	}
-
-	skb_reserve(skb, IWL_LINK_HDR_MAX);
-	skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), len);
-
-	/* mac80211 currently doesn't support paged SKB. Convert it to
-	 * linear SKB for management frame and data frame requires
-	 * software decryption or software defragementation. */
-	if (ieee80211_is_mgmt(fc) ||
-	    ieee80211_has_protected(fc) ||
-	    ieee80211_has_morefrags(fc) ||
-	    le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG ||
-	    (ieee80211_is_data_qos(fc) &&
-	     *ieee80211_get_qos_ctl(hdr) &
-	     IEEE80211_QOS_CONTROL_A_MSDU_PRESENT))
-		ret = skb_linearize(skb);
-	else
-		ret = __pskb_pull_tail(skb, min_t(u16, IWL_LINK_HDR_MAX, len)) ?
-			 0 : -ENOMEM;
-
-	if (ret) {
-		kfree_skb(skb);
-		goto out;
-	}
-
-	/*
-	 * XXX: We cannot touch the page and its virtual memory (hdr) after
-	 * here. It might have already been freed by the above skb change.
-	 */
-
-	iwl_update_stats(priv, false, fc, len);
-	memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
-
-	ieee80211_rx(priv->hw, skb);
- out:
-	priv->alloc_rxb_page--;
-	rxb->page = NULL;
-}
-
-/* This is necessary only for a number of statistics, see the caller. */
-static int iwl_is_network_packet(struct iwl_priv *priv,
-		struct ieee80211_hdr *header)
-{
-	/* Filter incoming packets to determine if they are targeted toward
-	 * this network, discarding packets coming from ourselves */
-	switch (priv->iw_mode) {
-	case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source    | BSSID */
-		/* packets to our IBSS update information */
-		return !compare_ether_addr(header->addr3, priv->bssid);
-	case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */
-		/* packets to our IBSS update information */
-		return !compare_ether_addr(header->addr2, priv->bssid);
-	default:
-		return 1;
-	}
-}
-
-/* Called for REPLY_RX (legacy ABG frames), or
- * REPLY_RX_MPDU_CMD (HT high-throughput N frames). */
-void iwl_rx_reply_rx(struct iwl_priv *priv,
-				struct iwl_rx_mem_buffer *rxb)
-{
-	struct ieee80211_hdr *header;
-	struct ieee80211_rx_status rx_status;
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-	struct iwl_rx_phy_res *phy_res;
-	__le32 rx_pkt_status;
-	struct iwl4965_rx_mpdu_res_start *amsdu;
-	u32 len;
-	u32 ampdu_status;
-	u32 rate_n_flags;
-
-	/**
-	 * REPLY_RX and REPLY_RX_MPDU_CMD are handled differently.
-	 *	REPLY_RX: physical layer info is in this buffer
-	 *	REPLY_RX_MPDU_CMD: physical layer info was sent in separate
-	 *		command and cached in priv->last_phy_res
-	 *
-	 * Here we set up local variables depending on which command is
-	 * received.
-	 */
-	if (pkt->hdr.cmd == REPLY_RX) {
-		phy_res = (struct iwl_rx_phy_res *)pkt->u.raw;
-		header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*phy_res)
-				+ phy_res->cfg_phy_cnt);
-
-		len = le16_to_cpu(phy_res->byte_count);
-		rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*phy_res) +
-				phy_res->cfg_phy_cnt + len);
-		ampdu_status = le32_to_cpu(rx_pkt_status);
-	} else {
-		if (!priv->last_phy_res[0]) {
-			IWL_ERR(priv, "MPDU frame without cached PHY data\n");
-			return;
-		}
-		phy_res = (struct iwl_rx_phy_res *)&priv->last_phy_res[1];
-		amsdu = (struct iwl4965_rx_mpdu_res_start *)pkt->u.raw;
-		header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*amsdu));
-		len = le16_to_cpu(amsdu->byte_count);
-		rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*amsdu) + len);
-		ampdu_status = iwl_translate_rx_status(priv,
-				le32_to_cpu(rx_pkt_status));
-	}
-
-	if ((unlikely(phy_res->cfg_phy_cnt > 20))) {
-		IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n",
-				phy_res->cfg_phy_cnt);
-		return;
-	}
-
-	if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) ||
-	    !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
-		IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n",
-				le32_to_cpu(rx_pkt_status));
-		return;
-	}
-
-	/* This will be used in several places later */
-	rate_n_flags = le32_to_cpu(phy_res->rate_n_flags);
-
-	/* rx_status carries information about the packet to mac80211 */
-	rx_status.mactime = le64_to_cpu(phy_res->timestamp);
-	rx_status.freq =
-		ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel));
-	rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
-				IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
-	rx_status.rate_idx =
-		iwl_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band);
-	rx_status.flag = 0;
-
-	/* TSF isn't reliable. In order to allow smooth user experience,
-	 * this W/A doesn't propagate it to the mac80211 */
-	/*rx_status.flag |= RX_FLAG_TSFT;*/
-
-	priv->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp);
-
-	/* Find max signal strength (dBm) among 3 antenna/receiver chains */
-	rx_status.signal = iwl_calc_rssi(priv, phy_res);
-
-	/* Meaningful noise values are available only from beacon statistics,
-	 *   which are gathered only when associated, and indicate noise
-	 *   only for the associated network channel ...
-	 * Ignore these noise values while scanning (other channels) */
-	if (iwl_is_associated(priv) &&
-	    !test_bit(STATUS_SCANNING, &priv->status)) {
-		rx_status.noise = priv->last_rx_noise;
-	} else {
-		rx_status.noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
-	}
-
-	/* Reset beacon noise level if not associated. */
-	if (!iwl_is_associated(priv))
-		priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-	/* Set "1" to report good data frames in groups of 100 */
-	if (unlikely(iwl_get_debug_level(priv) & IWL_DL_RX))
-		iwl_dbg_report_frame(priv, phy_res, len, header, 1);
-#endif
-	iwl_dbg_log_rx_data_frame(priv, len, header);
-	IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, TSF %llu\n",
-		rx_status.signal, rx_status.noise,
-		(unsigned long long)rx_status.mactime);
-
-	/*
-	 * "antenna number"
-	 *
-	 * It seems that the antenna field in the phy flags value
-	 * is actually a bit field. This is undefined by radiotap,
-	 * it wants an actual antenna number but I always get "7"
-	 * for most legacy frames I receive indicating that the
-	 * same frame was received on all three RX chains.
-	 *
-	 * I think this field should be removed in favor of a
-	 * new 802.11n radiotap field "RX chains" that is defined
-	 * as a bitmask.
-	 */
-	rx_status.antenna =
-		(le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK)
-		>> RX_RES_PHY_FLAGS_ANTENNA_POS;
-
-	/* set the preamble flag if appropriate */
-	if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
-		rx_status.flag |= RX_FLAG_SHORTPRE;
-
-	/* Set up the HT phy flags */
-	if (rate_n_flags & RATE_MCS_HT_MSK)
-		rx_status.flag |= RX_FLAG_HT;
-	if (rate_n_flags & RATE_MCS_HT40_MSK)
-		rx_status.flag |= RX_FLAG_40MHZ;
-	if (rate_n_flags & RATE_MCS_SGI_MSK)
-		rx_status.flag |= RX_FLAG_SHORT_GI;
-
-	if (iwl_is_network_packet(priv, header)) {
-		priv->last_rx_rssi = rx_status.signal;
-		priv->last_beacon_time =  priv->ucode_beacon_time;
-		priv->last_tsf = le64_to_cpu(phy_res->timestamp);
-	}
-
-	iwl_pass_packet_to_mac80211(priv, header, len, ampdu_status,
-				    rxb, &rx_status);
-}
-EXPORT_SYMBOL(iwl_rx_reply_rx);
-
-/* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD).
- * This will be used later in iwl_rx_reply_rx() for REPLY_RX_MPDU_CMD. */
-void iwl_rx_reply_rx_phy(struct iwl_priv *priv,
-				    struct iwl_rx_mem_buffer *rxb)
-{
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-	priv->last_phy_res[0] = 1;
-	memcpy(&priv->last_phy_res[1], &(pkt->u.raw[0]),
-	       sizeof(struct iwl_rx_phy_res));
-}
-EXPORT_SYMBOL(iwl_rx_reply_rx_phy);