diff options
author | Tomas Winkler <tomas.winkler@intel.com> | 2008-05-15 13:54:04 +0800 |
---|---|---|
committer | John W. Linville <linville@tuxdriver.com> | 2008-05-21 21:47:58 -0400 |
commit | 4f40e4d9fb8fe028db9ba2a7b4d3ac7328f73bbc (patch) | |
tree | 2fee89bbf870a188fb36c0c6a1cecc5c48fe8173 /drivers/net/wireless/iwlwifi/iwl-sta.c | |
parent | 57bd1bea485bf6f37ff365dec2203ba6467b41a1 (diff) |
iwlwifi: move more station managment into iwl-sta.c
This patch moves station management functions into iwl-sta.c (iwlcore).
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-sta.c')
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-sta.c | 269 |
1 files changed, 269 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index f2267047d10..c8e468fb3ca 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -117,6 +117,130 @@ int iwl_send_add_sta(struct iwl_priv *priv, } EXPORT_SYMBOL(iwl_send_add_sta); +#ifdef CONFIG_IWL4965_HT + +static void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index, + struct ieee80211_ht_info *sta_ht_inf) +{ + __le32 sta_flags; + u8 mimo_ps_mode; + + if (!sta_ht_inf || !sta_ht_inf->ht_supported) + goto done; + + mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2; + + sta_flags = priv->stations[index].sta.station_flags; + + sta_flags &= ~(STA_FLG_RTS_MIMO_PROT_MSK | STA_FLG_MIMO_DIS_MSK); + + switch (mimo_ps_mode) { + case WLAN_HT_CAP_MIMO_PS_STATIC: + sta_flags |= STA_FLG_MIMO_DIS_MSK; + break; + case WLAN_HT_CAP_MIMO_PS_DYNAMIC: + sta_flags |= STA_FLG_RTS_MIMO_PROT_MSK; + break; + case WLAN_HT_CAP_MIMO_PS_DISABLED: + break; + default: + IWL_WARNING("Invalid MIMO PS mode %d", mimo_ps_mode); + break; + } + + sta_flags |= cpu_to_le32( + (u32)sta_ht_inf->ampdu_factor << STA_FLG_MAX_AGG_SIZE_POS); + + sta_flags |= cpu_to_le32( + (u32)sta_ht_inf->ampdu_density << STA_FLG_AGG_MPDU_DENSITY_POS); + + if (iwl_is_fat_tx_allowed(priv, sta_ht_inf)) + sta_flags |= STA_FLG_FAT_EN_MSK; + else + sta_flags &= ~STA_FLG_FAT_EN_MSK; + + priv->stations[index].sta.station_flags = sta_flags; + done: + return; +} +#else +static inline void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index, + struct ieee80211_ht_info *sta_ht_info) +{ +} +#endif + +/** + * iwl_add_station_flags - Add station to tables in driver and device + */ +u8 iwl_add_station_flags(struct iwl_priv *priv, const u8 *addr, int is_ap, + u8 flags, struct ieee80211_ht_info *ht_info) +{ + int i; + int index = IWL_INVALID_STATION; + struct iwl_station_entry *station; + unsigned long flags_spin; + DECLARE_MAC_BUF(mac); + + spin_lock_irqsave(&priv->sta_lock, flags_spin); + if (is_ap) + index = IWL_AP_ID; + else if (is_broadcast_ether_addr(addr)) + index = priv->hw_params.bcast_sta_id; + else + for (i = IWL_STA_ID; i < priv->hw_params.max_stations; i++) { + if (!compare_ether_addr(priv->stations[i].sta.sta.addr, + addr)) { + index = i; + break; + } + + if (!priv->stations[i].used && + index == IWL_INVALID_STATION) + index = i; + } + + + /* These two conditions have the same outcome, but keep them separate + since they have different meanings */ + if (unlikely(index == IWL_INVALID_STATION)) { + spin_unlock_irqrestore(&priv->sta_lock, flags_spin); + return index; + } + + if (priv->stations[index].used && + !compare_ether_addr(priv->stations[index].sta.sta.addr, addr)) { + spin_unlock_irqrestore(&priv->sta_lock, flags_spin); + return index; + } + + + IWL_DEBUG_ASSOC("Add STA ID %d: %s\n", index, print_mac(mac, addr)); + station = &priv->stations[index]; + station->used = 1; + priv->num_stations++; + + /* Set up the REPLY_ADD_STA command to send to device */ + memset(&station->sta, 0, sizeof(struct iwl_addsta_cmd)); + memcpy(station->sta.sta.addr, addr, ETH_ALEN); + station->sta.mode = 0; + station->sta.sta.sta_id = index; + station->sta.station_flags = 0; + + /* BCAST station and IBSS stations do not work in HT mode */ + if (index != priv->hw_params.bcast_sta_id && + priv->iw_mode != IEEE80211_IF_TYPE_IBSS) + iwl_set_ht_add_station(priv, index, ht_info); + + spin_unlock_irqrestore(&priv->sta_lock, flags_spin); + + /* Add station to device's station table */ + iwl_send_add_sta(priv, &station->sta, flags); + return index; + +} +EXPORT_SYMBOL(iwl_add_station_flags); + int iwl_get_free_ucode_key_index(struct iwl_priv *priv) { int i; @@ -470,3 +594,148 @@ int iwl_send_lq_cmd(struct iwl_priv *priv, } EXPORT_SYMBOL(iwl_send_lq_cmd); +/** + * iwl_sta_init_lq - Initialize a station's hardware rate table + * + * The uCode's station table contains a table of fallback rates + * for automatic fallback during transmission. + * + * NOTE: This sets up a default set of values. These will be replaced later + * if the driver's iwl-4965-rs rate scaling algorithm is used, instead of + * rc80211_simple. + * + * NOTE: Run REPLY_ADD_STA command to set up station table entry, before + * calling this function (which runs REPLY_TX_LINK_QUALITY_CMD, + * which requires station table entry to exist). + */ +static void iwl_sta_init_lq(struct iwl_priv *priv, const u8 *addr, int is_ap) +{ + int i, r; + struct iwl_link_quality_cmd link_cmd = { + .reserved1 = 0, + }; + u16 rate_flags; + + /* Set up the rate scaling to start at selected rate, fall back + * all the way down to 1M in IEEE order, and then spin on 1M */ + if (is_ap) + r = IWL_RATE_54M_INDEX; + else if (priv->band == IEEE80211_BAND_5GHZ) + r = IWL_RATE_6M_INDEX; + else + r = IWL_RATE_1M_INDEX; + + for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) { + rate_flags = 0; + if (r >= IWL_FIRST_CCK_RATE && r <= IWL_LAST_CCK_RATE) + rate_flags |= RATE_MCS_CCK_MSK; + + /* Use Tx antenna B only */ + rate_flags |= RATE_MCS_ANT_B_MSK; /*FIXME:RS*/ + + link_cmd.rs_table[i].rate_n_flags = + iwl4965_hw_set_rate_n_flags(iwl_rates[r].plcp, rate_flags); + r = iwl4965_get_prev_ieee_rate(r); + } + + link_cmd.general_params.single_stream_ant_msk = 2; + link_cmd.general_params.dual_stream_ant_msk = 3; + link_cmd.agg_params.agg_dis_start_th = 3; + link_cmd.agg_params.agg_time_limit = cpu_to_le16(4000); + + /* Update the rate scaling for control frame Tx to AP */ + link_cmd.sta_id = is_ap ? IWL_AP_ID : priv->hw_params.bcast_sta_id; + + iwl_send_cmd_pdu_async(priv, REPLY_TX_LINK_QUALITY_CMD, + sizeof(link_cmd), &link_cmd, NULL); +} +/** + * iwl_rxon_add_station - add station into station table. + * + * there is only one AP station with id= IWL_AP_ID + * NOTE: mutex must be held before calling this fnction + */ +int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap) +{ + u8 sta_id; + + /* Add station to device's station table */ +#ifdef CONFIG_IWL4965_HT + struct ieee80211_conf *conf = &priv->hw->conf; + struct ieee80211_ht_info *cur_ht_config = &conf->ht_conf; + + if ((is_ap) && + (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) && + (priv->iw_mode == IEEE80211_IF_TYPE_STA)) + sta_id = iwl_add_station_flags(priv, addr, is_ap, + 0, cur_ht_config); + else +#endif /* CONFIG_IWL4965_HT */ + sta_id = iwl_add_station_flags(priv, addr, is_ap, + 0, NULL); + + /* Set up default rate scaling table in device's station table */ + iwl_sta_init_lq(priv, addr, is_ap); + + return sta_id; +} +EXPORT_SYMBOL(iwl_rxon_add_station); + + +/** + * iwl_get_sta_id - Find station's index within station table + * + * If new IBSS station, create new entry in station table + */ +int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr) +{ + int sta_id; + u16 fc = le16_to_cpu(hdr->frame_control); + DECLARE_MAC_BUF(mac); + + /* If this frame is broadcast or management, use broadcast station id */ + if (((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA) || + is_multicast_ether_addr(hdr->addr1)) + return priv->hw_params.bcast_sta_id; + + switch (priv->iw_mode) { + + /* If we are a client station in a BSS network, use the special + * AP station entry (that's the only station we communicate with) */ + case IEEE80211_IF_TYPE_STA: + return IWL_AP_ID; + + /* If we are an AP, then find the station, or use BCAST */ + case IEEE80211_IF_TYPE_AP: + sta_id = iwl_find_station(priv, hdr->addr1); + if (sta_id != IWL_INVALID_STATION) + return sta_id; + return priv->hw_params.bcast_sta_id; + + /* If this frame is going out to an IBSS network, find the station, + * or create a new station table entry */ + case IEEE80211_IF_TYPE_IBSS: + sta_id = iwl_find_station(priv, hdr->addr1); + if (sta_id != IWL_INVALID_STATION) + return sta_id; + + /* Create new station table entry */ + sta_id = iwl_add_station_flags(priv, hdr->addr1, + 0, CMD_ASYNC, NULL); + + if (sta_id != IWL_INVALID_STATION) + return sta_id; + + IWL_DEBUG_DROP("Station %s not in station map. " + "Defaulting to broadcast...\n", + print_mac(mac, hdr->addr1)); + iwl_print_hex_dump(priv, IWL_DL_DROP, (u8 *) hdr, sizeof(*hdr)); + return priv->hw_params.bcast_sta_id; + + default: + IWL_WARNING("Unknown mode of operation: %d", priv->iw_mode); + return priv->hw_params.bcast_sta_id; + } +} +EXPORT_SYMBOL(iwl_get_sta_id); + |