iwlwifi: only add broadcast station once

Currently the broadcast station is added after every RXON command. Change
this to only add the broadcast station when interface is added by mac80211.
With this we need some extra work to ensure broadcast station is always
present since station table is cleared when RXON without ASSOC bit set is
sent. To deal with this we re-add all driver known stations to uCode after
such an RXON command is sent.

We also do some cleanup and remove the various calls to clear the station
table. We now only clear the station table in two scenarios:
- only clear uCode portion of station table when RXON command without ASSOC
bit is sent
- clear uCode and driver portion when interface goes down or is removed.

We need to do this clearing when interface goes down to deal with the
device restart/reconfigure routines which do not remove the interface, but
do add the interface during reconfiguration.

Previously the keys were also cleared when station table in driver is
cleared, this is not done anymore since mac80211 will take care that keys
are set and cleared correctly.

There is a known issue with this change. Associating with different AP
without bringing interface down fails with a firmware error. This is
because of the lack of full station notification support and the later
patches in this series that complete the station notification support will
fix this.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>

1 files changed, 8 insertions, 1 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.h b/drivers/net/wireless/iwlwifi/iwl-sta.h
index 2dc35fe28f5..50367e83def 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.h
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.h
@@ -32,6 +32,12 @@
 #define HW_KEY_DYNAMIC 0
 #define HW_KEY_DEFAULT 1
 
+#define IWL_STA_DRIVER_ACTIVE BIT(0) /* driver entry is active */
+#define IWL_STA_UCODE_ACTIVE  BIT(1) /* ucode entry is active */
+#define IWL_STA_UCODE_INPROGRESS  BIT(2) /* ucode entry is in process of
+					    being activated */
+
+
 /**
  * iwl_find_station - Find station id for a given BSSID
  * @bssid: MAC address of station ID to find
@@ -55,7 +61,8 @@ int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap);
 void iwl_add_bcast_station(struct iwl_priv *priv);
 void iwl3945_add_bcast_station(struct iwl_priv *priv);
 int iwl_remove_station(struct iwl_priv *priv, const u8 *addr, bool is_ap);
-void iwl_clear_stations_table(struct iwl_priv *priv);
+void iwl_restore_stations(struct iwl_priv *priv);
+void iwl_clear_ucode_stations(struct iwl_priv *priv, bool force);
 int iwl_get_free_ucode_key_index(struct iwl_priv *priv);
 int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr);
 int iwl_get_ra_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr);