iwlwifi: remove testmode

The old nl80211 testmode is no longer useful in iwlwifi,
we're moving towards a new model internally and there's
no open tool to use it, so remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

1 files changed, 0 insertions, 309 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-testmode.h b/drivers/net/wireless/iwlwifi/iwl-testmode.h
deleted file mode 100644
index 98f48a9afc9..00000000000
--- a/drivers/net/wireless/iwlwifi/iwl-testmode.h
+++ /dev/null
@@ -1,309 +0,0 @@
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2010 - 2013 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called COPYING.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2010 - 2013 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *  * Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *  * Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *  * Neither the name Intel Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-#ifndef __IWL_TESTMODE_H__
-#define __IWL_TESTMODE_H__
-
-#include <linux/types.h>
-
-
-/*
- * Commands from user space to kernel space(IWL_TM_CMD_ID_APP2DEV_XX) and
- * from and kernel space to user space(IWL_TM_CMD_ID_DEV2APP_XX).
- * The command ID is carried with IWL_TM_ATTR_COMMAND.
- *
- * @IWL_TM_CMD_APP2DEV_UCODE:
- *	commands from user application to the uCode,
- *	the actual uCode host command ID is carried with
- *	IWL_TM_ATTR_UCODE_CMD_ID
- *
- * @IWL_TM_CMD_APP2DEV_DIRECT_REG_READ32:
- * @IWL_TM_CMD_APP2DEV_DIRECT_REG_WRITE32:
- * @IWL_TM_CMD_APP2DEV_DIRECT_REG_WRITE8:
- *	commands from user applicaiton to access register
- *
- * @IWL_TM_CMD_APP2DEV_GET_DEVICENAME: retrieve device name
- * @IWL_TM_CMD_APP2DEV_LOAD_INIT_FW: load initial uCode image
- * @IWL_TM_CMD_APP2DEV_CFG_INIT_CALIB: perform calibration
- * @IWL_TM_CMD_APP2DEV_LOAD_RUNTIME_FW: load runtime uCode image
- * @IWL_TM_CMD_APP2DEV_GET_EEPROM: request EEPROM data
- * @IWL_TM_CMD_APP2DEV_FIXRATE_REQ: set fix MCS
- *	commands fom user space for pure driver level operations
- *
- * @IWL_TM_CMD_APP2DEV_BEGIN_TRACE:
- * @IWL_TM_CMD_APP2DEV_END_TRACE:
- * @IWL_TM_CMD_APP2DEV_READ_TRACE:
- *	commands fom user space for uCode trace operations
- *
- * @IWL_TM_CMD_DEV2APP_SYNC_RSP:
- *	commands from kernel space to carry the synchronous response
- *	to user application
- * @IWL_TM_CMD_DEV2APP_UCODE_RX_PKT:
- *	commands from kernel space to multicast the spontaneous messages
- *	to user application, or reply of host commands
- * @IWL_TM_CMD_DEV2APP_EEPROM_RSP:
- *	commands from kernel space to carry the eeprom response
- *	to user application
- *
- * @IWL_TM_CMD_APP2DEV_OWNERSHIP:
- *	commands from user application to own change the ownership of the uCode
- *	if application has the ownership, the only host command from
- *	testmode will deliver to uCode. Default owner is driver
- *
- * @IWL_TM_CMD_APP2DEV_LOAD_WOWLAN_FW: load Wake On Wireless LAN uCode image
- * @IWL_TM_CMD_APP2DEV_GET_FW_VERSION: retrieve uCode version
- * @IWL_TM_CMD_APP2DEV_GET_DEVICE_ID: retrieve ID information in device
- * @IWL_TM_CMD_APP2DEV_GET_FW_INFO:
- *	retrieve information of existing loaded uCode image
- *
- * @IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_READ:
- * @IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_DUMP:
- * @IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_WRITE:
- *	Commands to read/write data from periphery or SRAM memory ranges.
- *	Fore reading, a READ command is sent from the userspace and the data
- *	is returned when the user calls a DUMP command.
- *	For writing, only a WRITE command is used.
- * @IWL_TM_CMD_APP2DEV_NOTIFICATIONS:
- *	Command to enable/disable notifications (currently RX packets) from the
- *	driver to userspace.
- */
-enum iwl_tm_cmd_t {
-	IWL_TM_CMD_APP2DEV_UCODE		= 1,
-	IWL_TM_CMD_APP2DEV_DIRECT_REG_READ32	= 2,
-	IWL_TM_CMD_APP2DEV_DIRECT_REG_WRITE32	= 3,
-	IWL_TM_CMD_APP2DEV_DIRECT_REG_WRITE8	= 4,
-	IWL_TM_CMD_APP2DEV_GET_DEVICENAME	= 5,
-	IWL_TM_CMD_APP2DEV_LOAD_INIT_FW		= 6,
-	IWL_TM_CMD_APP2DEV_CFG_INIT_CALIB	= 7,
-	IWL_TM_CMD_APP2DEV_LOAD_RUNTIME_FW	= 8,
-	IWL_TM_CMD_APP2DEV_GET_EEPROM		= 9,
-	IWL_TM_CMD_APP2DEV_FIXRATE_REQ		= 10,
-	IWL_TM_CMD_APP2DEV_BEGIN_TRACE		= 11,
-	IWL_TM_CMD_APP2DEV_END_TRACE		= 12,
-	IWL_TM_CMD_APP2DEV_READ_TRACE		= 13,
-	IWL_TM_CMD_DEV2APP_SYNC_RSP		= 14,
-	IWL_TM_CMD_DEV2APP_UCODE_RX_PKT		= 15,
-	IWL_TM_CMD_DEV2APP_EEPROM_RSP		= 16,
-	IWL_TM_CMD_APP2DEV_OWNERSHIP		= 17,
-	RESERVED_18				= 18,
-	RESERVED_19				= 19,
-	RESERVED_20				= 20,
-	RESERVED_21				= 21,
-	IWL_TM_CMD_APP2DEV_LOAD_WOWLAN_FW	= 22,
-	IWL_TM_CMD_APP2DEV_GET_FW_VERSION	= 23,
-	IWL_TM_CMD_APP2DEV_GET_DEVICE_ID	= 24,
-	IWL_TM_CMD_APP2DEV_GET_FW_INFO		= 25,
-	IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_READ = 26,
-	IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_DUMP = 27,
-	IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_WRITE = 28,
-	IWL_TM_CMD_APP2DEV_NOTIFICATIONS	= 29,
-	IWL_TM_CMD_MAX				= 30,
-};
-
-/*
- * Atrribute filed in testmode command
- * See enum iwl_tm_cmd_t.
- *
- * @IWL_TM_ATTR_NOT_APPLICABLE:
- *	The attribute is not applicable or invalid
- * @IWL_TM_ATTR_COMMAND:
- *	From user space to kernel space:
- *	the command either destines to ucode, driver, or register;
- *	From kernel space to user space:
- *	the command either carries synchronous response,
- *	or the spontaneous message multicast from the device;
- *
- * @IWL_TM_ATTR_UCODE_CMD_ID:
- * @IWL_TM_ATTR_UCODE_CMD_DATA:
- *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_UCODE,
- *	The mandatory fields are :
- *	IWL_TM_ATTR_UCODE_CMD_ID for recognizable command ID;
- *	IWL_TM_ATTR_UCODE_CMD_DATA for the actual command payload
- *	to the ucode
- *
- * @IWL_TM_ATTR_REG_OFFSET:
- * @IWL_TM_ATTR_REG_VALUE8:
- * @IWL_TM_ATTR_REG_VALUE32:
- *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_REG_XXX,
- *	The mandatory fields are:
- *	IWL_TM_ATTR_REG_OFFSET for the offset of the target register;
- *	IWL_TM_ATTR_REG_VALUE8 or IWL_TM_ATTR_REG_VALUE32 for value
- *
- * @IWL_TM_ATTR_SYNC_RSP:
- *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_DEV2APP_SYNC_RSP,
- *	The mandatory fields are:
- *	IWL_TM_ATTR_SYNC_RSP for the data content responding to the user
- *	application command
- *
- * @IWL_TM_ATTR_UCODE_RX_PKT:
- *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_DEV2APP_UCODE_RX_PKT,
- *	The mandatory fields are:
- *	IWL_TM_ATTR_UCODE_RX_PKT for the data content multicast to the user
- *	application
- *
- * @IWL_TM_ATTR_EEPROM:
- *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_DEV2APP_EEPROM,
- *	The mandatory fields are:
- *	IWL_TM_ATTR_EEPROM for the data content responging to the user
- *	application
- *
- * @IWL_TM_ATTR_TRACE_ADDR:
- * @IWL_TM_ATTR_TRACE_SIZE:
- * @IWL_TM_ATTR_TRACE_DUMP:
- *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_XXX_TRACE,
- *	The mandatory fields are:
- *	IWL_TM_ATTR_MEM_TRACE_ADDR for the trace address
- *	IWL_TM_ATTR_MEM_TRACE_SIZE for the trace buffer size
- *	IWL_TM_ATTR_MEM_TRACE_DUMP for the trace dump
- *
- * @IWL_TM_ATTR_FIXRATE:
- *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_FIXRATE_REQ,
- *	The mandatory fields are:
- *	IWL_TM_ATTR_FIXRATE for the fixed rate
- *
- * @IWL_TM_ATTR_UCODE_OWNER:
- *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_OWNERSHIP,
- *	The mandatory fields are:
- *	IWL_TM_ATTR_UCODE_OWNER for the new owner
- *
- * @IWL_TM_ATTR_MEM_ADDR:
- * @IWL_TM_ATTR_BUFFER_SIZE:
- *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_READ
- *	or IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_WRITE.
- *	The mandatory fields are:
- *	IWL_TM_ATTR_MEM_ADDR for the address in SRAM/periphery to read/write
- *	IWL_TM_ATTR_BUFFER_SIZE for the buffer size of data to read/write.
- *
- * @IWL_TM_ATTR_BUFFER_DUMP:
- *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_DUMP,
- *	IWL_TM_ATTR_BUFFER_DUMP is used for the data that was read.
- *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_INDIRECT_BUFFER_WRITE,
- *	this attribute contains the data to write.
- *
- * @IWL_TM_ATTR_FW_VERSION:
- *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_GET_FW_VERSION,
- *	IWL_TM_ATTR_FW_VERSION for the uCode version
- *
- * @IWL_TM_ATTR_DEVICE_ID:
- *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_GET_DEVICE_ID,
- *	IWL_TM_ATTR_DEVICE_ID for the device ID information
- *
- * @IWL_TM_ATTR_FW_TYPE:
- * @IWL_TM_ATTR_FW_INST_SIZE:
- * @IWL_TM_ATTR_FW_DATA_SIZE:
- *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_GET_FW_INFO,
- *	The mandatory fields are:
- *	IWL_TM_ATTR_FW_TYPE for the uCode type (INIT/RUNTIME/...)
- *	IWL_TM_ATTR_FW_INST_SIZE for the size of instruction section
- *	IWL_TM_ATTR_FW_DATA_SIZE for the size of data section
- *
- * @IWL_TM_ATTR_UCODE_CMD_SKB:
- *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_UCODE this flag
- *	indicates that the user wants to receive the response of the command
- *	in a reply SKB. If it's not present, the response is not returned.
- * @IWL_TM_ATTR_ENABLE_NOTIFICATIONS:
- *	When IWL_TM_ATTR_COMMAND is IWL_TM_CMD_APP2DEV_NOTIFICATIONS, this
- *	flag enables (if present) or disables (if not) the forwarding
- *	to userspace.
- */
-enum iwl_tm_attr_t {
-	IWL_TM_ATTR_NOT_APPLICABLE		= 0,
-	IWL_TM_ATTR_COMMAND			= 1,
-	IWL_TM_ATTR_UCODE_CMD_ID		= 2,
-	IWL_TM_ATTR_UCODE_CMD_DATA		= 3,
-	IWL_TM_ATTR_REG_OFFSET			= 4,
-	IWL_TM_ATTR_REG_VALUE8			= 5,
-	IWL_TM_ATTR_REG_VALUE32			= 6,
-	IWL_TM_ATTR_SYNC_RSP			= 7,
-	IWL_TM_ATTR_UCODE_RX_PKT		= 8,
-	IWL_TM_ATTR_EEPROM			= 9,
-	IWL_TM_ATTR_TRACE_ADDR			= 10,
-	IWL_TM_ATTR_TRACE_SIZE			= 11,
-	IWL_TM_ATTR_TRACE_DUMP			= 12,
-	IWL_TM_ATTR_FIXRATE			= 13,
-	IWL_TM_ATTR_UCODE_OWNER			= 14,
-	IWL_TM_ATTR_MEM_ADDR			= 15,
-	IWL_TM_ATTR_BUFFER_SIZE			= 16,
-	IWL_TM_ATTR_BUFFER_DUMP			= 17,
-	IWL_TM_ATTR_FW_VERSION			= 18,
-	IWL_TM_ATTR_DEVICE_ID			= 19,
-	IWL_TM_ATTR_FW_TYPE			= 20,
-	IWL_TM_ATTR_FW_INST_SIZE		= 21,
-	IWL_TM_ATTR_FW_DATA_SIZE		= 22,
-	IWL_TM_ATTR_UCODE_CMD_SKB		= 23,
-	IWL_TM_ATTR_ENABLE_NOTIFICATION		= 24,
-	IWL_TM_ATTR_MAX				= 25,
-};
-
-/* uCode trace buffer */
-#define TRACE_BUFF_SIZE_MAX	0x200000
-#define TRACE_BUFF_SIZE_MIN	0x20000
-#define TRACE_BUFF_SIZE_DEF	TRACE_BUFF_SIZE_MIN
-#define TRACE_BUFF_PADD		0x2000
-
-/* Maximum data size of each dump it packet */
-#define DUMP_CHUNK_SIZE		(PAGE_SIZE - 1024)
-
-/* Address offset of data segment in SRAM */
-#define SRAM_DATA_SEG_OFFSET   0x800000
-
-#endif