iwlagn: move PCI-E transport files

Move all the PCI-E specific transport files to
be iwl-trans-pcie*; specifically iwl-trans.c
which is really iwl-trans-pcie.c.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 1424 insertions, 0 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
new file mode 100644
index 00000000000..458a6fbc2e3
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
@@ -0,0 +1,1424 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are derived from the ipw3945 project, as well
+ * as portions of the ieee80211 subsystem header files.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/gfp.h>
+
+/*TODO: Remove include to iwl-core.h*/
+#include "iwl-core.h"
+#include "iwl-io.h"
+#include "iwl-helpers.h"
+#include "iwl-trans-pcie-int.h"
+
+/******************************************************************************
+ *
+ * RX path functions
+ *
+ ******************************************************************************/
+
+/*
+ * Rx theory of operation
+ *
+ * Driver allocates a circular buffer of Receive Buffer Descriptors (RBDs),
+ * each of which point to Receive Buffers to be filled by the NIC.  These get
+ * used not only for Rx frames, but for any command response or notification
+ * from the NIC.  The driver and NIC manage the Rx buffers by means
+ * of indexes into the circular buffer.
+ *
+ * Rx Queue Indexes
+ * The host/firmware share two index registers for managing the Rx buffers.
+ *
+ * The READ index maps to the first position that the firmware may be writing
+ * to -- the driver can read up to (but not including) this position and get
+ * good data.
+ * The READ index is managed by the firmware once the card is enabled.
+ *
+ * The WRITE index maps to the last position the driver has read from -- the
+ * position preceding WRITE is the last slot the firmware can place a packet.
+ *
+ * The queue is empty (no good data) if WRITE = READ - 1, and is full if
+ * WRITE = READ.
+ *
+ * During initialization, the host sets up the READ queue position to the first
+ * INDEX position, and WRITE to the last (READ - 1 wrapped)
+ *
+ * When the firmware places a packet in a buffer, it will advance the READ index
+ * and fire the RX interrupt.  The driver can then query the READ index and
+ * process as many packets as possible, moving the WRITE index forward as it
+ * resets the Rx queue buffers with new memory.
+ *
+ * The management in the driver is as follows:
+ * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free.  When
+ *   iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
+ *   to replenish the iwl->rxq->rx_free.
+ * + In iwl_rx_replenish (scheduled) if 'processed' != 'read' then the
+ *   iwl->rxq is replenished and the READ INDEX is updated (updating the
+ *   'processed' and 'read' driver indexes as well)
+ * + A received packet is processed and handed to the kernel network stack,
+ *   detached from the iwl->rxq.  The driver 'processed' index is updated.
+ * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
+ *   list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
+ *   INDEX is not incremented and iwl->status(RX_STALLED) is set.  If there
+ *   were enough free buffers and RX_STALLED is set it is cleared.
+ *
+ *
+ * Driver sequence:
+ *
+ * iwl_rx_queue_alloc()   Allocates rx_free
+ * iwl_rx_replenish()     Replenishes rx_free list from rx_used, and calls
+ *                            iwl_rx_queue_restock
+ * iwl_rx_queue_restock() Moves available buffers from rx_free into Rx
+ *                            queue, updates firmware pointers, and updates
+ *                            the WRITE index.  If insufficient rx_free buffers
+ *                            are available, schedules iwl_rx_replenish
+ *
+ * -- enable interrupts --
+ * ISR - iwl_rx()         Detach iwl_rx_mem_buffers from pool up to the
+ *                            READ INDEX, detaching the SKB from the pool.
+ *                            Moves the packet buffer from queue to rx_used.
+ *                            Calls iwl_rx_queue_restock to refill any empty
+ *                            slots.
+ * ...
+ *
+ */
+
+/**
+ * iwl_rx_queue_space - Return number of free slots available in queue.
+ */
+static int iwl_rx_queue_space(const struct iwl_rx_queue *q)
+{
+	int s = q->read - q->write;
+	if (s <= 0)
+		s += RX_QUEUE_SIZE;
+	/* keep some buffer to not confuse full and empty queue */
+	s -= 2;
+	if (s < 0)
+		s = 0;
+	return s;
+}
+
+/**
+ * iwl_rx_queue_update_write_ptr - Update the write pointer for the RX queue
+ */
+void iwl_rx_queue_update_write_ptr(struct iwl_trans *trans,
+			struct iwl_rx_queue *q)
+{
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&q->lock, flags);
+
+	if (q->need_update == 0)
+		goto exit_unlock;
+
+	if (hw_params(trans).shadow_reg_enable) {
+		/* shadow register enabled */
+		/* Device expects a multiple of 8 */
+		q->write_actual = (q->write & ~0x7);
+		iwl_write32(bus(trans), FH_RSCSR_CHNL0_WPTR, q->write_actual);
+	} else {
+		/* If power-saving is in use, make sure device is awake */
+		if (test_bit(STATUS_POWER_PMI, &trans->shrd->status)) {
+			reg = iwl_read32(bus(trans), CSR_UCODE_DRV_GP1);
+
+			if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
+				IWL_DEBUG_INFO(trans,
+					"Rx queue requesting wakeup,"
+					" GP1 = 0x%x\n", reg);
+				iwl_set_bit(bus(trans), CSR_GP_CNTRL,
+					CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+				goto exit_unlock;
+			}
+
+			q->write_actual = (q->write & ~0x7);
+			iwl_write_direct32(bus(trans), FH_RSCSR_CHNL0_WPTR,
+					q->write_actual);
+
+		/* Else device is assumed to be awake */
+		} else {
+			/* Device expects a multiple of 8 */
+			q->write_actual = (q->write & ~0x7);
+			iwl_write_direct32(bus(trans), FH_RSCSR_CHNL0_WPTR,
+				q->write_actual);
+		}
+	}
+	q->need_update = 0;
+
+ exit_unlock:
+	spin_unlock_irqrestore(&q->lock, flags);
+}
+
+/**
+ * iwlagn_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
+ */
+static inline __le32 iwlagn_dma_addr2rbd_ptr(dma_addr_t dma_addr)
+{
+	return cpu_to_le32((u32)(dma_addr >> 8));
+}
+
+/**
+ * iwlagn_rx_queue_restock - refill RX queue from pre-allocated pool
+ *
+ * If there are slots in the RX queue that need to be restocked,
+ * and we have free pre-allocated buffers, fill the ranks as much
+ * as we can, pulling from rx_free.
+ *
+ * This moves the 'write' index forward to catch up with 'processed', and
+ * also updates the memory address in the firmware to reference the new
+ * target buffer.
+ */
+static void iwlagn_rx_queue_restock(struct iwl_trans *trans)
+{
+	struct iwl_trans_pcie *trans_pcie =
+		IWL_TRANS_GET_PCIE_TRANS(trans);
+
+	struct iwl_rx_queue *rxq = &trans_pcie->rxq;
+	struct list_head *element;
+	struct iwl_rx_mem_buffer *rxb;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rxq->lock, flags);
+	while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
+		/* The overwritten rxb must be a used one */
+		rxb = rxq->queue[rxq->write];
+		BUG_ON(rxb && rxb->page);
+
+		/* Get next free Rx buffer, remove from free list */
+		element = rxq->rx_free.next;
+		rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
+		list_del(element);
+
+		/* Point to Rx buffer via next RBD in circular buffer */
+		rxq->bd[rxq->write] = iwlagn_dma_addr2rbd_ptr(rxb->page_dma);
+		rxq->queue[rxq->write] = rxb;
+		rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
+		rxq->free_count--;
+	}
+	spin_unlock_irqrestore(&rxq->lock, flags);
+	/* If the pre-allocated buffer pool is dropping low, schedule to
+	 * refill it */
+	if (rxq->free_count <= RX_LOW_WATERMARK)
+		queue_work(trans->shrd->workqueue, &trans_pcie->rx_replenish);
+
+
+	/* If we've added more space for the firmware to place data, tell it.
+	 * Increment device's write pointer in multiples of 8. */
+	if (rxq->write_actual != (rxq->write & ~0x7)) {
+		spin_lock_irqsave(&rxq->lock, flags);
+		rxq->need_update = 1;
+		spin_unlock_irqrestore(&rxq->lock, flags);
+		iwl_rx_queue_update_write_ptr(trans, rxq);
+	}
+}
+
+/**
+ * iwlagn_rx_replenish - Move all used packet from rx_used to rx_free
+ *
+ * When moving to rx_free an SKB is allocated for the slot.
+ *
+ * Also restock the Rx queue via iwl_rx_queue_restock.
+ * This is called as a scheduled work item (except for during initialization)
+ */
+static void iwlagn_rx_allocate(struct iwl_trans *trans, gfp_t priority)
+{
+	struct iwl_trans_pcie *trans_pcie =
+		IWL_TRANS_GET_PCIE_TRANS(trans);
+
+	struct iwl_rx_queue *rxq = &trans_pcie->rxq;
+	struct list_head *element;
+	struct iwl_rx_mem_buffer *rxb;
+	struct page *page;
+	unsigned long flags;
+	gfp_t gfp_mask = priority;
+
+	while (1) {
+		spin_lock_irqsave(&rxq->lock, flags);
+		if (list_empty(&rxq->rx_used)) {
+			spin_unlock_irqrestore(&rxq->lock, flags);
+			return;
+		}
+		spin_unlock_irqrestore(&rxq->lock, flags);
+
+		if (rxq->free_count > RX_LOW_WATERMARK)
+			gfp_mask |= __GFP_NOWARN;
+
+		if (hw_params(trans).rx_page_order > 0)
+			gfp_mask |= __GFP_COMP;
+
+		/* Alloc a new receive buffer */
+		page = alloc_pages(gfp_mask,
+				  hw_params(trans).rx_page_order);
+		if (!page) {
+			if (net_ratelimit())
+				IWL_DEBUG_INFO(trans, "alloc_pages failed, "
+					   "order: %d\n",
+					   hw_params(trans).rx_page_order);
+
+			if ((rxq->free_count <= RX_LOW_WATERMARK) &&
+			    net_ratelimit())
+				IWL_CRIT(trans, "Failed to alloc_pages with %s."
+					 "Only %u free buffers remaining.\n",
+					 priority == GFP_ATOMIC ?
+					 "GFP_ATOMIC" : "GFP_KERNEL",
+					 rxq->free_count);
+			/* We don't reschedule replenish work here -- we will
+			 * call the restock method and if it still needs
+			 * more buffers it will schedule replenish */
+			return;
+		}
+
+		spin_lock_irqsave(&rxq->lock, flags);
+
+		if (list_empty(&rxq->rx_used)) {
+			spin_unlock_irqrestore(&rxq->lock, flags);
+			__free_pages(page, hw_params(trans).rx_page_order);
+			return;
+		}
+		element = rxq->rx_used.next;
+		rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
+		list_del(element);
+
+		spin_unlock_irqrestore(&rxq->lock, flags);
+
+		BUG_ON(rxb->page);
+		rxb->page = page;
+		/* Get physical address of the RB */
+		rxb->page_dma = dma_map_page(bus(trans)->dev, page, 0,
+				PAGE_SIZE << hw_params(trans).rx_page_order,
+				DMA_FROM_DEVICE);
+		/* dma address must be no more than 36 bits */
+		BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36));
+		/* and also 256 byte aligned! */
+		BUG_ON(rxb->page_dma & DMA_BIT_MASK(8));
+
+		spin_lock_irqsave(&rxq->lock, flags);
+
+		list_add_tail(&rxb->list, &rxq->rx_free);
+		rxq->free_count++;
+
+		spin_unlock_irqrestore(&rxq->lock, flags);
+	}
+}
+
+void iwlagn_rx_replenish(struct iwl_trans *trans)
+{
+	unsigned long flags;
+
+	iwlagn_rx_allocate(trans, GFP_KERNEL);
+
+	spin_lock_irqsave(&trans->shrd->lock, flags);
+	iwlagn_rx_queue_restock(trans);
+	spin_unlock_irqrestore(&trans->shrd->lock, flags);
+}
+
+static void iwlagn_rx_replenish_now(struct iwl_trans *trans)
+{
+	iwlagn_rx_allocate(trans, GFP_ATOMIC);
+
+	iwlagn_rx_queue_restock(trans);
+}
+
+void iwl_bg_rx_replenish(struct work_struct *data)
+{
+	struct iwl_trans_pcie *trans_pcie =
+	    container_of(data, struct iwl_trans_pcie, rx_replenish);
+	struct iwl_trans *trans = trans_pcie->trans;
+
+	if (test_bit(STATUS_EXIT_PENDING, &trans->shrd->status))
+		return;
+
+	mutex_lock(&trans->shrd->mutex);
+	iwlagn_rx_replenish(trans);
+	mutex_unlock(&trans->shrd->mutex);
+}
+
+/**
+ * iwl_rx_handle - Main entry function for receiving responses from uCode
+ *
+ * Uses the priv->rx_handlers callback function array to invoke
+ * the appropriate handlers, including command responses,
+ * frame-received notifications, and other notifications.
+ */
+static void iwl_rx_handle(struct iwl_trans *trans)
+{
+	struct iwl_rx_mem_buffer *rxb;
+	struct iwl_rx_packet *pkt;
+	struct iwl_trans_pcie *trans_pcie =
+		IWL_TRANS_GET_PCIE_TRANS(trans);
+	struct iwl_rx_queue *rxq = &trans_pcie->rxq;
+	u32 r, i;
+	int reclaim;
+	unsigned long flags;
+	u8 fill_rx = 0;
+	u32 count = 8;
+	int total_empty;
+
+	/* uCode's read index (stored in shared DRAM) indicates the last Rx
+	 * buffer that the driver may process (last buffer filled by ucode). */
+	r = le16_to_cpu(rxq->rb_stts->closed_rb_num) &  0x0FFF;
+	i = rxq->read;
+
+	/* Rx interrupt, but nothing sent from uCode */
+	if (i == r)
+		IWL_DEBUG_RX(trans, "r = %d, i = %d\n", r, i);
+
+	/* calculate total frames need to be restock after handling RX */
+	total_empty = r - rxq->write_actual;
+	if (total_empty < 0)
+		total_empty += RX_QUEUE_SIZE;
+
+	if (total_empty > (RX_QUEUE_SIZE / 2))
+		fill_rx = 1;
+
+	while (i != r) {
+		int len;
+		u16 txq_id, sequence;
+
+		rxb = rxq->queue[i];
+
+		/* If an RXB doesn't have a Rx queue slot associated with it,
+		 * then a bug has been introduced in the queue refilling
+		 * routines -- catch it here */
+		if (WARN_ON(rxb == NULL)) {
+			i = (i + 1) & RX_QUEUE_MASK;
+			continue;
+		}
+
+		rxq->queue[i] = NULL;
+
+		dma_unmap_page(bus(trans)->dev, rxb->page_dma,
+			       PAGE_SIZE << hw_params(trans).rx_page_order,
+			       DMA_FROM_DEVICE);
+		pkt = rxb_addr(rxb);
+
+		IWL_DEBUG_RX(trans, "r = %d, i = %d, %s, 0x%02x\n", r,
+			i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
+
+		len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
+		len += sizeof(u32); /* account for status word */
+		trace_iwlwifi_dev_rx(priv(trans), pkt, len);
+
+		/* Reclaim a command buffer only if this packet is a response
+		 *   to a (driver-originated) command.
+		 * If the packet (e.g. Rx frame) originated from uCode,
+		 *   there is no command buffer to reclaim.
+		 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
+		 *   but apparently a few don't get set; catch them here. */
+		reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
+			(pkt->hdr.cmd != REPLY_RX_PHY_CMD) &&
+			(pkt->hdr.cmd != REPLY_RX) &&
+			(pkt->hdr.cmd != REPLY_RX_MPDU_CMD) &&
+			(pkt->hdr.cmd != REPLY_COMPRESSED_BA) &&
+			(pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
+			(pkt->hdr.cmd != REPLY_TX);
+
+		sequence = le16_to_cpu(pkt->hdr.sequence);
+		txq_id = SEQ_TO_QUEUE(le16_to_cpu(pkt->hdr.sequence));
+
+		/* warn if this is cmd response / notification and the uCode
+		 * didn't set the SEQ_RX_FRAME for a frame that is
+		 * uCode-originated*/
+		WARN(txq_id == trans->shrd->cmd_queue && reclaim == false &&
+		     (!(pkt->hdr.sequence & SEQ_RX_FRAME)),
+		     "reclaim is false, SEQ_RX_FRAME unset: %s\n",
+		     get_cmd_string(pkt->hdr.cmd));
+
+		iwl_rx_dispatch(priv(trans), rxb);
+
+		/*
+		 * XXX: After here, we should always check rxb->page
+		 * against NULL before touching it or its virtual
+		 * memory (pkt). Because some rx_handler might have
+		 * already taken or freed the pages.
+		 */
+
+		if (reclaim) {
+			/* Invoke any callbacks, transfer the buffer to caller,
+			 * and fire off the (possibly) blocking
+			 * iwl_trans_send_cmd()
+			 * as we reclaim the driver command queue */
+			if (rxb->page)
+				iwl_tx_cmd_complete(trans, rxb);
+			else
+				IWL_WARN(trans, "Claim null rxb?\n");
+		}
+
+		/* Reuse the page if possible. For notification packets and
+		 * SKBs that fail to Rx correctly, add them back into the
+		 * rx_free list for reuse later. */
+		spin_lock_irqsave(&rxq->lock, flags);
+		if (rxb->page != NULL) {
+			rxb->page_dma = dma_map_page(bus(trans)->dev, rxb->page,
+				0, PAGE_SIZE <<
+				    hw_params(trans).rx_page_order,
+				DMA_FROM_DEVICE);
+			list_add_tail(&rxb->list, &rxq->rx_free);
+			rxq->free_count++;
+		} else
+			list_add_tail(&rxb->list, &rxq->rx_used);
+
+		spin_unlock_irqrestore(&rxq->lock, flags);
+
+		i = (i + 1) & RX_QUEUE_MASK;
+		/* If there are a lot of unused frames,
+		 * restock the Rx queue so ucode wont assert. */
+		if (fill_rx) {
+			count++;
+			if (count >= 8) {
+				rxq->read = i;
+				iwlagn_rx_replenish_now(trans);
+				count = 0;
+			}
+		}
+	}
+
+	/* Backtrack one entry */
+	rxq->read = i;
+	if (fill_rx)
+		iwlagn_rx_replenish_now(trans);
+	else
+		iwlagn_rx_queue_restock(trans);
+}
+
+static const char * const desc_lookup_text[] = {
+	"OK",
+	"FAIL",
+	"BAD_PARAM",
+	"BAD_CHECKSUM",
+	"NMI_INTERRUPT_WDG",
+	"SYSASSERT",
+	"FATAL_ERROR",
+	"BAD_COMMAND",
+	"HW_ERROR_TUNE_LOCK",
+	"HW_ERROR_TEMPERATURE",
+	"ILLEGAL_CHAN_FREQ",
+	"VCC_NOT_STABLE",
+	"FH_ERROR",
+	"NMI_INTERRUPT_HOST",
+	"NMI_INTERRUPT_ACTION_PT",
+	"NMI_INTERRUPT_UNKNOWN",
+	"UCODE_VERSION_MISMATCH",
+	"HW_ERROR_ABS_LOCK",
+	"HW_ERROR_CAL_LOCK_FAIL",
+	"NMI_INTERRUPT_INST_ACTION_PT",
+	"NMI_INTERRUPT_DATA_ACTION_PT",
+	"NMI_TRM_HW_ER",
+	"NMI_INTERRUPT_TRM",
+	"NMI_INTERRUPT_BREAK_POINT",
+	"DEBUG_0",
+	"DEBUG_1",
+	"DEBUG_2",
+	"DEBUG_3",
+};
+
+static struct { char *name; u8 num; } advanced_lookup[] = {
+	{ "NMI_INTERRUPT_WDG", 0x34 },
+	{ "SYSASSERT", 0x35 },
+	{ "UCODE_VERSION_MISMATCH", 0x37 },
+	{ "BAD_COMMAND", 0x38 },
+	{ "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C },
+	{ "FATAL_ERROR", 0x3D },
+	{ "NMI_TRM_HW_ERR", 0x46 },
+	{ "NMI_INTERRUPT_TRM", 0x4C },
+	{ "NMI_INTERRUPT_BREAK_POINT", 0x54 },
+	{ "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C },
+	{ "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64 },
+	{ "NMI_INTERRUPT_HOST", 0x66 },
+	{ "NMI_INTERRUPT_ACTION_PT", 0x7C },
+	{ "NMI_INTERRUPT_UNKNOWN", 0x84 },
+	{ "NMI_INTERRUPT_INST_ACTION_PT", 0x86 },
+	{ "ADVANCED_SYSASSERT", 0 },
+};
+
+static const char *desc_lookup(u32 num)
+{
+	int i;
+	int max = ARRAY_SIZE(desc_lookup_text);
+
+	if (num < max)
+		return desc_lookup_text[num];
+
+	max = ARRAY_SIZE(advanced_lookup) - 1;
+	for (i = 0; i < max; i++) {
+		if (advanced_lookup[i].num == num)
+			break;
+	}
+	return advanced_lookup[i].name;
+}
+
+#define ERROR_START_OFFSET  (1 * sizeof(u32))
+#define ERROR_ELEM_SIZE     (7 * sizeof(u32))
+
+static void iwl_dump_nic_error_log(struct iwl_trans *trans)
+{
+	u32 base;
+	struct iwl_error_event_table table;
+	struct iwl_priv *priv = priv(trans);
+	struct iwl_trans_pcie *trans_pcie =
+		IWL_TRANS_GET_PCIE_TRANS(trans);
+
+	base = priv->device_pointers.error_event_table;
+	if (priv->ucode_type == IWL_UCODE_INIT) {
+		if (!base)
+			base = priv->init_errlog_ptr;
+	} else {
+		if (!base)
+			base = priv->inst_errlog_ptr;
+	}
+
+	if (!iwlagn_hw_valid_rtc_data_addr(base)) {
+		IWL_ERR(trans,
+			"Not valid error log pointer 0x%08X for %s uCode\n",
+			base,
+			(priv->ucode_type == IWL_UCODE_INIT)
+					? "Init" : "RT");
+		return;
+	}
+
+	iwl_read_targ_mem_words(bus(priv), base, &table, sizeof(table));
+
+	if (ERROR_START_OFFSET <= table.valid * ERROR_ELEM_SIZE) {
+		IWL_ERR(trans, "Start IWL Error Log Dump:\n");
+		IWL_ERR(trans, "Status: 0x%08lX, count: %d\n",
+			trans->shrd->status, table.valid);
+	}
+
+	trans_pcie->isr_stats.err_code = table.error_id;
+
+	trace_iwlwifi_dev_ucode_error(priv, table.error_id, table.tsf_low,
+				      table.data1, table.data2, table.line,
+				      table.blink1, table.blink2, table.ilink1,
+				      table.ilink2, table.bcon_time, table.gp1,
+				      table.gp2, table.gp3, table.ucode_ver,
+				      table.hw_ver, table.brd_ver);
+	IWL_ERR(trans, "0x%08X | %-28s\n", table.error_id,
+		desc_lookup(table.error_id));
+	IWL_ERR(trans, "0x%08X | uPc\n", table.pc);
+	IWL_ERR(trans, "0x%08X | branchlink1\n", table.blink1);
+	IWL_ERR(trans, "0x%08X | branchlink2\n", table.blink2);
+	IWL_ERR(trans, "0x%08X | interruptlink1\n", table.ilink1);
+	IWL_ERR(trans, "0x%08X | interruptlink2\n", table.ilink2);
+	IWL_ERR(trans, "0x%08X | data1\n", table.data1);
+	IWL_ERR(trans, "0x%08X | data2\n", table.data2);
+	IWL_ERR(trans, "0x%08X | line\n", table.line);
+	IWL_ERR(trans, "0x%08X | beacon time\n", table.bcon_time);
+	IWL_ERR(trans, "0x%08X | tsf low\n", table.tsf_low);
+	IWL_ERR(trans, "0x%08X | tsf hi\n", table.tsf_hi);
+	IWL_ERR(trans, "0x%08X | time gp1\n", table.gp1);
+	IWL_ERR(trans, "0x%08X | time gp2\n", table.gp2);
+	IWL_ERR(trans, "0x%08X | time gp3\n", table.gp3);
+	IWL_ERR(trans, "0x%08X | uCode version\n", table.ucode_ver);
+	IWL_ERR(trans, "0x%08X | hw version\n", table.hw_ver);
+	IWL_ERR(trans, "0x%08X | board version\n", table.brd_ver);
+	IWL_ERR(trans, "0x%08X | hcmd\n", table.hcmd);
+}
+
+/**
+ * iwl_irq_handle_error - called for HW or SW error interrupt from card
+ */
+static void iwl_irq_handle_error(struct iwl_trans *trans)
+{
+	struct iwl_priv *priv = priv(trans);
+	/* W/A for WiFi/WiMAX coex and WiMAX own the RF */
+	if (priv->cfg->internal_wimax_coex &&
+	    (!(iwl_read_prph(bus(trans), APMG_CLK_CTRL_REG) &
+			APMS_CLK_VAL_MRB_FUNC_MODE) ||
+	     (iwl_read_prph(bus(trans), APMG_PS_CTRL_REG) &
+			APMG_PS_CTRL_VAL_RESET_REQ))) {
+		/*
+		 * Keep the restart process from trying to send host
+		 * commands by clearing the ready bit.
+		 */
+		clear_bit(STATUS_READY, &trans->shrd->status);
+		clear_bit(STATUS_HCMD_ACTIVE, &trans->shrd->status);
+		wake_up_interruptible(&priv->shrd->wait_command_queue);
+		IWL_ERR(trans, "RF is used by WiMAX\n");
+		return;
+	}
+
+	IWL_ERR(trans, "Loaded firmware version: %s\n",
+		priv->hw->wiphy->fw_version);
+
+	iwl_dump_nic_error_log(trans);
+	iwl_dump_csr(trans);
+	iwl_dump_fh(trans, NULL, false);
+	iwl_dump_nic_event_log(trans, false, NULL, false);
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (iwl_get_debug_level(trans->shrd) & IWL_DL_FW_ERRORS)
+		iwl_print_rx_config_cmd(priv(trans), IWL_RXON_CTX_BSS);
+#endif
+
+	iwlagn_fw_error(priv, false);
+}
+
+#define EVENT_START_OFFSET  (4 * sizeof(u32))
+
+/**
+ * iwl_print_event_log - Dump error event log to syslog
+ *
+ */
+static int iwl_print_event_log(struct iwl_trans *trans, u32 start_idx,
+			       u32 num_events, u32 mode,
+			       int pos, char **buf, size_t bufsz)
+{
+	u32 i;
+	u32 base;       /* SRAM byte address of event log header */
+	u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
+	u32 ptr;        /* SRAM byte address of log data */
+	u32 ev, time, data; /* event log data */
+	unsigned long reg_flags;
+	struct iwl_priv *priv = priv(trans);
+
+	if (num_events == 0)
+		return pos;
+
+	base = priv->device_pointers.log_event_table;
+	if (priv->ucode_type == IWL_UCODE_INIT) {
+		if (!base)
+			base = priv->init_evtlog_ptr;
+	} else {
+		if (!base)
+			base = priv->inst_evtlog_ptr;
+	}
+
+	if (mode == 0)
+		event_size = 2 * sizeof(u32);
+	else
+		event_size = 3 * sizeof(u32);
+
+	ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
+
+	/* Make sure device is powered up for SRAM reads */
+	spin_lock_irqsave(&bus(trans)->reg_lock, reg_flags);
+	iwl_grab_nic_access(bus(trans));
+
+	/* Set starting address; reads will auto-increment */
+	iwl_write32(bus(trans), HBUS_TARG_MEM_RADDR, ptr);
+	rmb();
+
+	/* "time" is actually "data" for mode 0 (no timestamp).
+	* place event id # at far right for easier visual parsing. */
+	for (i = 0; i < num_events; i++) {
+		ev = iwl_read32(bus(trans), HBUS_TARG_MEM_RDAT);
+		time = iwl_read32(bus(trans), HBUS_TARG_MEM_RDAT);
+		if (mode == 0) {
+			/* data, ev */
+			if (bufsz) {
+				pos += scnprintf(*buf + pos, bufsz - pos,
+						"EVT_LOG:0x%08x:%04u\n",
+						time, ev);
+			} else {
+				trace_iwlwifi_dev_ucode_event(priv, 0,
+					time, ev);
+				IWL_ERR(trans, "EVT_LOG:0x%08x:%04u\n",
+					time, ev);
+			}
+		} else {
+			data = iwl_read32(bus(trans), HBUS_TARG_MEM_RDAT);
+			if (bufsz) {
+				pos += scnprintf(*buf + pos, bufsz - pos,
+						"EVT_LOGT:%010u:0x%08x:%04u\n",
+						 time, data, ev);
+			} else {
+				IWL_ERR(trans, "EVT_LOGT:%010u:0x%08x:%04u\n",
+					time, data, ev);
+				trace_iwlwifi_dev_ucode_event(priv, time,
+					data, ev);
+			}
+		}
+	}
+
+	/* Allow device to power down */
+	iwl_release_nic_access(bus(trans));
+	spin_unlock_irqrestore(&bus(trans)->reg_lock, reg_flags);
+	return pos;
+}
+
+/**
+ * iwl_print_last_event_logs - Dump the newest # of event log to syslog
+ */
+static int iwl_print_last_event_logs(struct iwl_trans *trans, u32 capacity,
+				    u32 num_wraps, u32 next_entry,
+				    u32 size, u32 mode,
+				    int pos, char **buf, size_t bufsz)
+{
+	/*
+	 * display the newest DEFAULT_LOG_ENTRIES entries
+	 * i.e the entries just before the next ont that uCode would fill.
+	 */
+	if (num_wraps) {
+		if (next_entry < size) {
+			pos = iwl_print_event_log(trans,
+						capacity - (size - next_entry),
+						size - next_entry, mode,
+						pos, buf, bufsz);
+			pos = iwl_print_event_log(trans, 0,
+						  next_entry, mode,
+						  pos, buf, bufsz);
+		} else
+			pos = iwl_print_event_log(trans, next_entry - size,
+						  size, mode, pos, buf, bufsz);
+	} else {
+		if (next_entry < size) {
+			pos = iwl_print_event_log(trans, 0, next_entry,
+						  mode, pos, buf, bufsz);
+		} else {
+			pos = iwl_print_event_log(trans, next_entry - size,
+						  size, mode, pos, buf, bufsz);
+		}
+	}
+	return pos;
+}
+
+#define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20)
+
+int iwl_dump_nic_event_log(struct iwl_trans *trans, bool full_log,
+			    char **buf, bool display)
+{
+	u32 base;       /* SRAM byte address of event log header */
+	u32 capacity;   /* event log capacity in # entries */
+	u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
+	u32 num_wraps;  /* # times uCode wrapped to top of log */
+	u32 next_entry; /* index of next entry to be written by uCode */
+	u32 size;       /* # entries that we'll print */
+	u32 logsize;
+	int pos = 0;
+	size_t bufsz = 0;
+	struct iwl_priv *priv = priv(trans);
+
+	base = priv->device_pointers.log_event_table;
+	if (priv->ucode_type == IWL_UCODE_INIT) {
+		logsize = priv->init_evtlog_size;
+		if (!base)
+			base = priv->init_evtlog_ptr;
+	} else {
+		logsize = priv->inst_evtlog_size;
+		if (!base)
+			base = priv->inst_evtlog_ptr;
+	}
+
+	if (!iwlagn_hw_valid_rtc_data_addr(base)) {
+		IWL_ERR(trans,
+			"Invalid event log pointer 0x%08X for %s uCode\n",
+			base,
+			(priv->ucode_type == IWL_UCODE_INIT)
+					? "Init" : "RT");
+		return -EINVAL;
+	}
+
+	/* event log header */
+	capacity = iwl_read_targ_mem(bus(trans), base);
+	mode = iwl_read_targ_mem(bus(trans), base + (1 * sizeof(u32)));
+	num_wraps = iwl_read_targ_mem(bus(trans), base + (2 * sizeof(u32)));
+	next_entry = iwl_read_targ_mem(bus(trans), base + (3 * sizeof(u32)));
+
+	if (capacity > logsize) {
+		IWL_ERR(trans, "Log capacity %d is bogus, limit to %d "
+			"entries\n", capacity, logsize);
+		capacity = logsize;
+	}
+
+	if (next_entry > logsize) {
+		IWL_ERR(trans, "Log write index %d is bogus, limit to %d\n",
+			next_entry, logsize);
+		next_entry = logsize;
+	}
+
+	size = num_wraps ? capacity : next_entry;
+
+	/* bail out if nothing in log */
+	if (size == 0) {
+		IWL_ERR(trans, "Start IWL Event Log Dump: nothing in log\n");
+		return pos;
+	}
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (!(iwl_get_debug_level(trans->shrd) & IWL_DL_FW_ERRORS) && !full_log)
+		size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
+			? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
+#else
+	size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
+		? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
+#endif
+	IWL_ERR(trans, "Start IWL Event Log Dump: display last %u entries\n",
+		size);
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (display) {
+		if (full_log)
+			bufsz = capacity * 48;
+		else
+			bufsz = size * 48;
+		*buf = kmalloc(bufsz, GFP_KERNEL);
+		if (!*buf)
+			return -ENOMEM;
+	}
+	if ((iwl_get_debug_level(trans->shrd) & IWL_DL_FW_ERRORS) || full_log) {
+		/*
+		 * if uCode has wrapped back to top of log,
+		 * start at the oldest entry,
+		 * i.e the next one that uCode would fill.
+		 */
+		if (num_wraps)
+			pos = iwl_print_event_log(trans, next_entry,
+						capacity - next_entry, mode,
+						pos, buf, bufsz);
+		/* (then/else) start at top of log */
+		pos = iwl_print_event_log(trans, 0,
+					  next_entry, mode, pos, buf, bufsz);
+	} else
+		pos = iwl_print_last_event_logs(trans, capacity, num_wraps,
+						next_entry, size, mode,
+						pos, buf, bufsz);
+#else
+	pos = iwl_print_last_event_logs(trans, capacity, num_wraps,
+					next_entry, size, mode,
+					pos, buf, bufsz);
+#endif
+	return pos;
+}
+
+/* tasklet for iwlagn interrupt */
+void iwl_irq_tasklet(struct iwl_trans *trans)
+{
+	u32 inta = 0;
+	u32 handled = 0;
+	unsigned long flags;
+	u32 i;
+#ifdef CONFIG_IWLWIFI_DEBUG
+	u32 inta_mask;
+#endif
+
+	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
+	struct isr_statistics *isr_stats = &trans_pcie->isr_stats;
+
+
+	spin_lock_irqsave(&trans->shrd->lock, flags);
+
+	/* Ack/clear/reset pending uCode interrupts.
+	 * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
+	 */
+	/* There is a hardware bug in the interrupt mask function that some
+	 * interrupts (i.e. CSR_INT_BIT_SCD) can still be generated even if
+	 * they are disabled in the CSR_INT_MASK register. Furthermore the
+	 * ICT interrupt handling mechanism has another bug that might cause
+	 * these unmasked interrupts fail to be detected. We workaround the
+	 * hardware bugs here by ACKing all the possible interrupts so that
+	 * interrupt coalescing can still be achieved.
+	 */
+	iwl_write32(bus(trans), CSR_INT,
+		trans_pcie->inta | ~trans_pcie->inta_mask);
+
+	inta = trans_pcie->inta;
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (iwl_get_debug_level(trans->shrd) & IWL_DL_ISR) {
+		/* just for debug */
+		inta_mask = iwl_read32(bus(trans), CSR_INT_MASK);
+		IWL_DEBUG_ISR(trans, "inta 0x%08x, enabled 0x%08x\n ",
+				inta, inta_mask);
+	}
+#endif
+
+	spin_unlock_irqrestore(&trans->shrd->lock, flags);
+
+	/* saved interrupt in inta variable now we can reset trans_pcie->inta */
+	trans_pcie->inta = 0;
+
+	/* Now service all interrupt bits discovered above. */
+	if (inta & CSR_INT_BIT_HW_ERR) {
+		IWL_ERR(trans, "Hardware error detected.  Restarting.\n");
+
+		/* Tell the device to stop sending interrupts */
+		iwl_disable_interrupts(trans);
+
+		isr_stats->hw++;
+		iwl_irq_handle_error(trans);
+
+		handled |= CSR_INT_BIT_HW_ERR;
+
+		return;
+	}
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (iwl_get_debug_level(trans->shrd) & (IWL_DL_ISR)) {
+		/* NIC fires this, but we don't use it, redundant with WAKEUP */
+		if (inta & CSR_INT_BIT_SCD) {
+			IWL_DEBUG_ISR(trans, "Scheduler finished to transmit "
+				      "the frame/frames.\n");
+			isr_stats->sch++;
+		}
+
+		/* Alive notification via Rx interrupt will do the real work */
+		if (inta & CSR_INT_BIT_ALIVE) {
+			IWL_DEBUG_ISR(trans, "Alive interrupt\n");
+			isr_stats->alive++;
+		}
+	}
+#endif
+	/* Safely ignore these bits for debug checks below */
+	inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
+
+	/* HW RF KILL switch toggled */
+	if (inta & CSR_INT_BIT_RF_KILL) {
+		int hw_rf_kill = 0;
+		if (!(iwl_read32(bus(trans), CSR_GP_CNTRL) &
+				CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
+			hw_rf_kill = 1;
+
+		IWL_WARN(trans, "RF_KILL bit toggled to %s.\n",
+				hw_rf_kill ? "disable radio" : "enable radio");
+
+		isr_stats->rfkill++;
+
+		/* driver only loads ucode once setting the interface up.
+		 * the driver allows loading the ucode even if the radio
+		 * is killed. Hence update the killswitch state here. The
+		 * rfkill handler will care about restarting if needed.
+		 */
+		if (!test_bit(STATUS_ALIVE, &trans->shrd->status)) {
+			if (hw_rf_kill)
+				set_bit(STATUS_RF_KILL_HW,
+					&trans->shrd->status);
+			else
+				clear_bit(STATUS_RF_KILL_HW,
+					  &trans->shrd->status);
+			iwl_set_hw_rfkill_state(priv(trans), hw_rf_kill);
+		}
+
+		handled |= CSR_INT_BIT_RF_KILL;
+	}
+
+	/* Chip got too hot and stopped itself */
+	if (inta & CSR_INT_BIT_CT_KILL) {
+		IWL_ERR(trans, "Microcode CT kill error detected.\n");
+		isr_stats->ctkill++;
+		handled |= CSR_INT_BIT_CT_KILL;
+	}
+
+	/* Error detected by uCode */
+	if (inta & CSR_INT_BIT_SW_ERR) {
+		IWL_ERR(trans, "Microcode SW error detected. "
+			" Restarting 0x%X.\n", inta);
+		isr_stats->sw++;
+		iwl_irq_handle_error(trans);
+		handled |= CSR_INT_BIT_SW_ERR;
+	}
+
+	/* uCode wakes up after power-down sleep */
+	if (inta & CSR_INT_BIT_WAKEUP) {
+		IWL_DEBUG_ISR(trans, "Wakeup interrupt\n");
+		iwl_rx_queue_update_write_ptr(trans, &trans_pcie->rxq);
+		for (i = 0; i < hw_params(trans).max_txq_num; i++)
+			iwl_txq_update_write_ptr(trans,
+						 &trans_pcie->txq[i]);
+
+		isr_stats->wakeup++;
+
+		handled |= CSR_INT_BIT_WAKEUP;
+	}
+
+	/* All uCode command responses, including Tx command responses,
+	 * Rx "responses" (frame-received notification), and other
+	 * notifications from uCode come through here*/
+	if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX |
+			CSR_INT_BIT_RX_PERIODIC)) {
+		IWL_DEBUG_ISR(trans, "Rx interrupt\n");
+		if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
+			handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
+			iwl_write32(bus(trans), CSR_FH_INT_STATUS,
+					CSR_FH_INT_RX_MASK);
+		}
+		if (inta & CSR_INT_BIT_RX_PERIODIC) {
+			handled |= CSR_INT_BIT_RX_PERIODIC;
+			iwl_write32(bus(trans),
+				CSR_INT, CSR_INT_BIT_RX_PERIODIC);
+		}
+		/* Sending RX interrupt require many steps to be done in the
+		 * the device:
+		 * 1- write interrupt to current index in ICT table.
+		 * 2- dma RX frame.
+		 * 3- update RX shared data to indicate last write index.
+		 * 4- send interrupt.
+		 * This could lead to RX race, driver could receive RX interrupt
+		 * but the shared data changes does not reflect this;
+		 * periodic interrupt will detect any dangling Rx activity.
+		 */
+
+		/* Disable periodic interrupt; we use it as just a one-shot. */
+		iwl_write8(bus(trans), CSR_INT_PERIODIC_REG,
+			    CSR_INT_PERIODIC_DIS);
+		iwl_rx_handle(trans);
+
+		/*
+		 * Enable periodic interrupt in 8 msec only if we received
+		 * real RX interrupt (instead of just periodic int), to catch
+		 * any dangling Rx interrupt.  If it was just the periodic
+		 * interrupt, there was no dangling Rx activity, and no need
+		 * to extend the periodic interrupt; one-shot is enough.
+		 */
+		if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX))
+			iwl_write8(bus(trans), CSR_INT_PERIODIC_REG,
+				    CSR_INT_PERIODIC_ENA);
+
+		isr_stats->rx++;
+	}
+
+	/* This "Tx" DMA channel is used only for loading uCode */
+	if (inta & CSR_INT_BIT_FH_TX) {
+		iwl_write32(bus(trans), CSR_FH_INT_STATUS, CSR_FH_INT_TX_MASK);
+		IWL_DEBUG_ISR(trans, "uCode load interrupt\n");
+		isr_stats->tx++;
+		handled |= CSR_INT_BIT_FH_TX;
+		/* Wake up uCode load routine, now that load is complete */
+		priv(trans)->ucode_write_complete = 1;
+		wake_up_interruptible(&trans->shrd->wait_command_queue);
+	}
+
+	if (inta & ~handled) {
+		IWL_ERR(trans, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
+		isr_stats->unhandled++;
+	}
+
+	if (inta & ~(trans_pcie->inta_mask)) {
+		IWL_WARN(trans, "Disabled INTA bits 0x%08x were pending\n",
+			 inta & ~trans_pcie->inta_mask);
+	}
+
+	/* Re-enable all interrupts */
+	/* only Re-enable if disabled by irq */
+	if (test_bit(STATUS_INT_ENABLED, &trans->shrd->status))
+		iwl_enable_interrupts(trans);
+	/* Re-enable RF_KILL if it occurred */
+	else if (handled & CSR_INT_BIT_RF_KILL)
+		iwl_enable_rfkill_int(priv(trans));
+}
+
+/******************************************************************************
+ *
+ * ICT functions
+ *
+ ******************************************************************************/
+#define ICT_COUNT (PAGE_SIZE/sizeof(u32))
+
+/* Free dram table */
+void iwl_free_isr_ict(struct iwl_trans *trans)
+{
+	struct iwl_trans_pcie *trans_pcie =
+		IWL_TRANS_GET_PCIE_TRANS(trans);
+
+	if (trans_pcie->ict_tbl_vir) {
+		dma_free_coherent(bus(trans)->dev,
+				  (sizeof(u32) * ICT_COUNT) + PAGE_SIZE,
+				  trans_pcie->ict_tbl_vir,
+				  trans_pcie->ict_tbl_dma);
+		trans_pcie->ict_tbl_vir = NULL;
+		memset(&trans_pcie->ict_tbl_dma, 0,
+			sizeof(trans_pcie->ict_tbl_dma));
+		memset(&trans_pcie->aligned_ict_tbl_dma, 0,
+			sizeof(trans_pcie->aligned_ict_tbl_dma));
+	}
+}
+
+
+/* allocate dram shared table it is a PAGE_SIZE aligned
+ * also reset all data related to ICT table interrupt.
+ */
+int iwl_alloc_isr_ict(struct iwl_trans *trans)
+{
+	struct iwl_trans_pcie *trans_pcie =
+		IWL_TRANS_GET_PCIE_TRANS(trans);
+
+	/* allocate shrared data table */
+	trans_pcie->ict_tbl_vir =
+		dma_alloc_coherent(bus(trans)->dev,
+				   (sizeof(u32) * ICT_COUNT) + PAGE_SIZE,
+				   &trans_pcie->ict_tbl_dma, GFP_KERNEL);
+	if (!trans_pcie->ict_tbl_vir)
+		return -ENOMEM;
+
+	/* align table to PAGE_SIZE boundary */
+	trans_pcie->aligned_ict_tbl_dma =
+		ALIGN(trans_pcie->ict_tbl_dma, PAGE_SIZE);
+
+	IWL_DEBUG_ISR(trans, "ict dma addr %Lx dma aligned %Lx diff %d\n",
+			   (unsigned long long)trans_pcie->ict_tbl_dma,
+			   (unsigned long long)trans_pcie->aligned_ict_tbl_dma,
+			   (int)(trans_pcie->aligned_ict_tbl_dma -
+			   trans_pcie->ict_tbl_dma));
+
+	trans_pcie->ict_tbl =  trans_pcie->ict_tbl_vir +
+			  (trans_pcie->aligned_ict_tbl_dma -
+			  trans_pcie->ict_tbl_dma);
+
+	IWL_DEBUG_ISR(trans, "ict vir addr %p vir aligned %p diff %d\n",
+			     trans_pcie->ict_tbl, trans_pcie->ict_tbl_vir,
+			(int)(trans_pcie->aligned_ict_tbl_dma -
+			    trans_pcie->ict_tbl_dma));
+
+	/* reset table and index to all 0 */
+	memset(trans_pcie->ict_tbl_vir, 0,
+		(sizeof(u32) * ICT_COUNT) + PAGE_SIZE);
+	trans_pcie->ict_index = 0;
+
+	/* add periodic RX interrupt */
+	trans_pcie->inta_mask |= CSR_INT_BIT_RX_PERIODIC;
+	return 0;
+}
+
+/* Device is going up inform it about using ICT interrupt table,
+ * also we need to tell the driver to start using ICT interrupt.
+ */
+int iwl_reset_ict(struct iwl_trans *trans)
+{
+	u32 val;
+	unsigned long flags;
+	struct iwl_trans_pcie *trans_pcie =
+		IWL_TRANS_GET_PCIE_TRANS(trans);
+
+	if (!trans_pcie->ict_tbl_vir)
+		return 0;
+
+	spin_lock_irqsave(&trans->shrd->lock, flags);
+	iwl_disable_interrupts(trans);
+
+	memset(&trans_pcie->ict_tbl[0], 0, sizeof(u32) * ICT_COUNT);
+
+	val = trans_pcie->aligned_ict_tbl_dma >> PAGE_SHIFT;
+
+	val |= CSR_DRAM_INT_TBL_ENABLE;
+	val |= CSR_DRAM_INIT_TBL_WRAP_CHECK;
+
+	IWL_DEBUG_ISR(trans, "CSR_DRAM_INT_TBL_REG =0x%X "
+			"aligned dma address %Lx\n",
+			val,
+			(unsigned long long)trans_pcie->aligned_ict_tbl_dma);
+
+	iwl_write32(bus(trans), CSR_DRAM_INT_TBL_REG, val);
+	trans_pcie->use_ict = true;
+	trans_pcie->ict_index = 0;
+	iwl_write32(bus(trans), CSR_INT, trans_pcie->inta_mask);
+	iwl_enable_interrupts(trans);
+	spin_unlock_irqrestore(&trans->shrd->lock, flags);
+
+	return 0;
+}
+
+/* Device is going down disable ict interrupt usage */
+void iwl_disable_ict(struct iwl_trans *trans)
+{
+	struct iwl_trans_pcie *trans_pcie =
+		IWL_TRANS_GET_PCIE_TRANS(trans);
+
+	unsigned long flags;
+
+	spin_lock_irqsave(&trans->shrd->lock, flags);
+	trans_pcie->use_ict = false;
+	spin_unlock_irqrestore(&trans->shrd->lock, flags);
+}
+
+static irqreturn_t iwl_isr(int irq, void *data)
+{
+	struct iwl_trans *trans = data;
+	struct iwl_trans_pcie *trans_pcie;
+	u32 inta, inta_mask;
+	unsigned long flags;
+#ifdef CONFIG_IWLWIFI_DEBUG
+	u32 inta_fh;
+#endif
+	if (!trans)
+		return IRQ_NONE;
+
+	trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
+
+	spin_lock_irqsave(&trans->shrd->lock, flags);
+
+	/* Disable (but don't clear!) interrupts here to avoid
+	 *    back-to-back ISRs and sporadic interrupts from our NIC.
+	 * If we have something to service, the tasklet will re-enable ints.
+	 * If we *don't* have something, we'll re-enable before leaving here. */
+	inta_mask = iwl_read32(bus(trans), CSR_INT_MASK);  /* just for debug */
+	iwl_write32(bus(trans), CSR_INT_MASK, 0x00000000);
+
+	/* Discover which interrupts are active/pending */
+	inta = iwl_read32(bus(trans), CSR_INT);
+
+	/* Ignore interrupt if there's nothing in NIC to service.
+	 * This may be due to IRQ shared with another device,
+	 * or due to sporadic interrupts thrown from our NIC. */
+	if (!inta) {
+		IWL_DEBUG_ISR(trans, "Ignore interrupt, inta == 0\n");
+		goto none;
+	}
+
+	if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
+		/* Hardware disappeared. It might have already raised
+		 * an interrupt */
+		IWL_WARN(trans, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
+		goto unplugged;
+	}
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (iwl_get_debug_level(trans->shrd) & (IWL_DL_ISR)) {
+		inta_fh = iwl_read32(bus(trans), CSR_FH_INT_STATUS);
+		IWL_DEBUG_ISR(trans, "ISR inta 0x%08x, enabled 0x%08x, "
+			      "fh 0x%08x\n", inta, inta_mask, inta_fh);
+	}
+#endif
+
+	trans_pcie->inta |= inta;
+	/* iwl_irq_tasklet() will service interrupts and re-enable them */
+	if (likely(inta))
+		tasklet_schedule(&trans_pcie->irq_tasklet);
+	else if (test_bit(STATUS_INT_ENABLED, &trans->shrd->status) &&
+			!trans_pcie->inta)
+		iwl_enable_interrupts(trans);
+
+ unplugged:
+	spin_unlock_irqrestore(&trans->shrd->lock, flags);
+	return IRQ_HANDLED;
+
+ none:
+	/* re-enable interrupts here since we don't have anything to service. */
+	/* only Re-enable if disabled by irq  and no schedules tasklet. */
+	if (test_bit(STATUS_INT_ENABLED, &trans->shrd->status) &&
+		!trans_pcie->inta)
+		iwl_enable_interrupts(trans);
+
+	spin_unlock_irqrestore(&trans->shrd->lock, flags);
+	return IRQ_NONE;
+}
+
+/* interrupt handler using ict table, with this interrupt driver will
+ * stop using INTA register to get device's interrupt, reading this register
+ * is expensive, device will write interrupts in ICT dram table, increment
+ * index then will fire interrupt to driver, driver will OR all ICT table
+ * entries from current index up to table entry with 0 value. the result is
+ * the interrupt we need to service, driver will set the entries back to 0 and
+ * set index.
+ */
+irqreturn_t iwl_isr_ict(int irq, void *data)
+{
+	struct iwl_trans *trans = data;
+	struct iwl_trans_pcie *trans_pcie;
+	u32 inta, inta_mask;
+	u32 val = 0;
+	unsigned long flags;
+
+	if (!trans)
+		return IRQ_NONE;
+
+	trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
+
+	/* dram interrupt table not set yet,
+	 * use legacy interrupt.
+	 */
+	if (!trans_pcie->use_ict)
+		return iwl_isr(irq, data);
+
+	spin_lock_irqsave(&trans->shrd->lock, flags);
+
+	/* Disable (but don't clear!) interrupts here to avoid
+	 * back-to-back ISRs and sporadic interrupts from our NIC.
+	 * If we have something to service, the tasklet will re-enable ints.
+	 * If we *don't* have something, we'll re-enable before leaving here.
+	 */
+	inta_mask = iwl_read32(bus(trans), CSR_INT_MASK);  /* just for debug */
+	iwl_write32(bus(trans), CSR_INT_MASK, 0x00000000);
+
+
+	/* Ignore interrupt if there's nothing in NIC to service.
+	 * This may be due to IRQ shared with another device,
+	 * or due to sporadic interrupts thrown from our NIC. */
+	if (!trans_pcie->ict_tbl[trans_pcie->ict_index]) {
+		IWL_DEBUG_ISR(trans, "Ignore interrupt, inta == 0\n");
+		goto none;
+	}
+
+	/* read all entries that not 0 start with ict_index */
+	while (trans_pcie->ict_tbl[trans_pcie->ict_index]) {
+
+		val |= le32_to_cpu(trans_pcie->ict_tbl[trans_pcie->ict_index]);
+		IWL_DEBUG_ISR(trans, "ICT index %d value 0x%08X\n",
+				trans_pcie->ict_index,
+				le32_to_cpu(
+				  trans_pcie->ict_tbl[trans_pcie->ict_index]));
+		trans_pcie->ict_tbl[trans_pcie->ict_index] = 0;
+		trans_pcie->ict_index =
+			iwl_queue_inc_wrap(trans_pcie->ict_index, ICT_COUNT);
+
+	}
+
+	/* We should not get this value, just ignore it. */
+	if (val == 0xffffffff)
+		val = 0;
+
+	/*
+	 * this is a w/a for a h/w bug. the h/w bug may cause the Rx bit
+	 * (bit 15 before shifting it to 31) to clear when using interrupt
+	 * coalescing. fortunately, bits 18 and 19 stay set when this happens
+	 * so we use them to decide on the real state of the Rx bit.
+	 * In order words, bit 15 is set if bit 18 or bit 19 are set.
+	 */
+	if (val & 0xC0000)
+		val |= 0x8000;
+
+	inta = (0xff & val) | ((0xff00 & val) << 16);
+	IWL_DEBUG_ISR(trans, "ISR inta 0x%08x, enabled 0x%08x ict 0x%08x\n",
+			inta, inta_mask, val);
+
+	inta &= trans_pcie->inta_mask;
+	trans_pcie->inta |= inta;
+
+	/* iwl_irq_tasklet() will service interrupts and re-enable them */
+	if (likely(inta))
+		tasklet_schedule(&trans_pcie->irq_tasklet);
+	else if (test_bit(STATUS_INT_ENABLED, &trans->shrd->status) &&
+			!trans_pcie->inta) {
+		/* Allow interrupt if was disabled by this handler and
+		 * no tasklet was schedules, We should not enable interrupt,
+		 * tasklet will enable it.
+		 */
+		iwl_enable_interrupts(trans);
+	}
+
+	spin_unlock_irqrestore(&trans->shrd->lock, flags);
+	return IRQ_HANDLED;
+
+ none:
+	/* re-enable interrupts here since we don't have anything to service.
+	 * only Re-enable if disabled by irq.
+	 */
+	if (test_bit(STATUS_INT_ENABLED, &trans->shrd->status) &&
+		!trans_pcie->inta)
+		iwl_enable_interrupts(trans);
+
+	spin_unlock_irqrestore(&trans->shrd->lock, flags);
+	return IRQ_NONE;
+}