Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David S Miller:

 1) Remove the ipv4 routing cache.  Now lookups go directly into the FIB
    trie and use prebuilt routes cached there.

    No more garbage collection, no more rDOS attacks on the routing
    cache.  Instead we now get predictable and consistent performance,
    no matter what the pattern of traffic we service.

    This has been almost 2 years in the making.  Special thanks to
    Julian Anastasov, Eric Dumazet, Steffen Klassert, and others who
    have helped along the way.

    I'm sure that with a change of this magnitude there will be some
    kind of fallout, but such things ought the be simple to fix at this
    point.  Luckily I'm not European so I'll be around all of August to
    fix things :-)

    The major stages of this work here are each fronted by a forced
    merge commit whose commit message contains a top-level description
    of the motivations and implementation issues.

 2) Pre-demux of established ipv4 TCP sockets, saves a route demux on
    input.

 3) TCP SYN/ACK performance tweaks from Eric Dumazet.

 4) Add namespace support for netfilter L4 conntrack helpers, from Gao
    Feng.

 5) Add config mechanism for Energy Efficient Ethernet to ethtool, from
    Yuval Mintz.

 6) Remove quadratic behavior from /proc/net/unix, from Eric Dumazet.

 7) Support for connection tracker helpers in userspace, from Pablo
    Neira Ayuso.

 8) Allow userspace driven TX load balancing functions in TEAM driver,
    from Jiri Pirko.

 9) Kill off NLMSG_PUT and RTA_PUT macros, more gross stuff with
    embedded gotos.

10) TCP Small Queues, essentially minimize the amount of TCP data queued
    up in the packet scheduler layer.  Whereas the existing BQL (Byte
    Queue Limits) limits the pkt_sched --> netdevice queuing levels,
    this controls the TCP --> pkt_sched queueing levels.

    From Eric Dumazet.

11) Reduce the number of get_page/put_page ops done on SKB fragments,
    from Alexander Duyck.

12) Implement protection against blind resets in TCP (RFC 5961), from
    Eric Dumazet.

13) Support the client side of TCP Fast Open, basically the ability to
    send data in the SYN exchange, from Yuchung Cheng.

    Basically, the sender queues up data with a sendmsg() call using
    MSG_FASTOPEN, then they do the connect() which emits the queued up
    fastopen data.

14) Avoid all the problems we get into in TCP when timers or PMTU events
    hit a locked socket.  The TCP Small Queues changes added a
    tcp_release_cb() that allows us to queue work up to the
    release_sock() caller, and that's what we use here too.  From Eric
    Dumazet.

15) Zero copy on TX support for TUN driver, from Michael S. Tsirkin.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1870 commits)
  genetlink: define lockdep_genl_is_held() when CONFIG_LOCKDEP
  r8169: revert "add byte queue limit support".
  ipv4: Change rt->rt_iif encoding.
  net: Make skb->skb_iif always track skb->dev
  ipv4: Prepare for change of rt->rt_iif encoding.
  ipv4: Remove all RTCF_DIRECTSRC handliing.
  ipv4: Really ignore ICMP address requests/replies.
  decnet: Don't set RTCF_DIRECTSRC.
  net/ipv4/ip_vti.c: Fix __rcu warnings detected by sparse.
  ipv4: Remove redundant assignment
  rds: set correct msg_namelen
  openvswitch: potential NULL deref in sample()
  tcp: dont drop MTU reduction indications
  bnx2x: Add new 57840 device IDs
  tcp: avoid oops in tcp_metrics and reset tcpm_stamp
  niu: Change niu_rbr_fill() to use unlikely() to check niu_rbr_add_page() return value
  niu: Fix to check for dma mapping errors.
  net: Fix references to out-of-scope variables in put_cmsg_compat()
  net: ethernet: davinci_emac: add pm_runtime support
  net: ethernet: davinci_emac: Remove unnecessary #include
  ...

1 files changed, 403 insertions, 0 deletions

diff --git a/drivers/net/wireless/iwlwifi/pcie/6000.c b/drivers/net/wireless/iwlwifi/pcie/6000.c
new file mode 100644
index 00000000000..4a57624afc4
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/pcie/6000.c
@@ -0,0 +1,403 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2008 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/stringify.h>
+#include "iwl-config.h"
+#include "iwl-agn-hw.h"
+#include "cfg.h"
+#include "dvm/commands.h" /* needed for BT for now */
+
+/* Highest firmware API version supported */
+#define IWL6000_UCODE_API_MAX 6
+#define IWL6050_UCODE_API_MAX 5
+#define IWL6000G2_UCODE_API_MAX 6
+#define IWL6035_UCODE_API_MAX 6
+
+/* Oldest version we won't warn about */
+#define IWL6000_UCODE_API_OK 4
+#define IWL6000G2_UCODE_API_OK 5
+#define IWL6050_UCODE_API_OK 5
+#define IWL6000G2B_UCODE_API_OK 6
+#define IWL6035_UCODE_API_OK 6
+
+/* Lowest firmware API version supported */
+#define IWL6000_UCODE_API_MIN 4
+#define IWL6050_UCODE_API_MIN 4
+#define IWL6000G2_UCODE_API_MIN 5
+#define IWL6035_UCODE_API_MIN 6
+
+/* EEPROM versions */
+#define EEPROM_6000_TX_POWER_VERSION	(4)
+#define EEPROM_6000_EEPROM_VERSION	(0x423)
+#define EEPROM_6050_TX_POWER_VERSION	(4)
+#define EEPROM_6050_EEPROM_VERSION	(0x532)
+#define EEPROM_6150_TX_POWER_VERSION	(6)
+#define EEPROM_6150_EEPROM_VERSION	(0x553)
+#define EEPROM_6005_TX_POWER_VERSION	(6)
+#define EEPROM_6005_EEPROM_VERSION	(0x709)
+#define EEPROM_6030_TX_POWER_VERSION	(6)
+#define EEPROM_6030_EEPROM_VERSION	(0x709)
+#define EEPROM_6035_TX_POWER_VERSION	(6)
+#define EEPROM_6035_EEPROM_VERSION	(0x753)
+
+#define IWL6000_FW_PRE "iwlwifi-6000-"
+#define IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE __stringify(api) ".ucode"
+
+#define IWL6050_FW_PRE "iwlwifi-6050-"
+#define IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE __stringify(api) ".ucode"
+
+#define IWL6005_FW_PRE "iwlwifi-6000g2a-"
+#define IWL6005_MODULE_FIRMWARE(api) IWL6005_FW_PRE __stringify(api) ".ucode"
+
+#define IWL6030_FW_PRE "iwlwifi-6000g2b-"
+#define IWL6030_MODULE_FIRMWARE(api) IWL6030_FW_PRE __stringify(api) ".ucode"
+
+static const struct iwl_base_params iwl6000_base_params = {
+	.eeprom_size = OTP_LOW_IMAGE_SIZE,
+	.num_of_queues = IWLAGN_NUM_QUEUES,
+	.pll_cfg_val = 0,
+	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+	.shadow_ram_support = true,
+	.led_compensation = 51,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
+	.wd_timeout = IWL_DEF_WD_TIMEOUT,
+	.max_event_log_size = 512,
+	.shadow_reg_enable = false, /* TODO: fix bugs using this feature */
+};
+
+static const struct iwl_base_params iwl6050_base_params = {
+	.eeprom_size = OTP_LOW_IMAGE_SIZE,
+	.num_of_queues = IWLAGN_NUM_QUEUES,
+	.pll_cfg_val = 0,
+	.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
+	.shadow_ram_support = true,
+	.led_compensation = 51,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.chain_noise_scale = 1500,
+	.wd_timeout = IWL_DEF_WD_TIMEOUT,
+	.max_event_log_size = 1024,
+	.shadow_reg_enable = false, /* TODO: fix bugs using this feature */
+};
+
+static const struct iwl_base_params iwl6000_g2_base_params = {
+	.eeprom_size = OTP_LOW_IMAGE_SIZE,
+	.num_of_queues = IWLAGN_NUM_QUEUES,
+	.pll_cfg_val = 0,
+	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+	.shadow_ram_support = true,
+	.led_compensation = 57,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
+	.wd_timeout = IWL_LONG_WD_TIMEOUT,
+	.max_event_log_size = 512,
+	.shadow_reg_enable = false, /* TODO: fix bugs using this feature */
+};
+
+static const struct iwl_ht_params iwl6000_ht_params = {
+	.ht_greenfield_support = true,
+	.use_rts_for_aggregation = true, /* use rts/cts protection */
+	.ht40_bands = BIT(IEEE80211_BAND_2GHZ) | BIT(IEEE80211_BAND_5GHZ),
+};
+
+static const struct iwl_bt_params iwl6000_bt_params = {
+	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
+	.advanced_bt_coexist = true,
+	.agg_time_limit = BT_AGG_THRESHOLD_DEF,
+	.bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
+	.bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
+	.bt_sco_disable = true,
+};
+
+static const struct iwl_eeprom_params iwl6000_eeprom_params = {
+	.regulatory_bands = {
+		EEPROM_REG_BAND_1_CHANNELS,
+		EEPROM_REG_BAND_2_CHANNELS,
+		EEPROM_REG_BAND_3_CHANNELS,
+		EEPROM_REG_BAND_4_CHANNELS,
+		EEPROM_REG_BAND_5_CHANNELS,
+		EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
+		EEPROM_REG_BAND_52_HT40_CHANNELS
+	},
+	.enhanced_txpower = true,
+};
+
+#define IWL_DEVICE_6005						\
+	.fw_name_pre = IWL6005_FW_PRE,				\
+	.ucode_api_max = IWL6000G2_UCODE_API_MAX,		\
+	.ucode_api_ok = IWL6000G2_UCODE_API_OK,			\
+	.ucode_api_min = IWL6000G2_UCODE_API_MIN,		\
+	.device_family = IWL_DEVICE_FAMILY_6005,		\
+	.max_inst_size = IWL60_RTC_INST_SIZE,			\
+	.max_data_size = IWL60_RTC_DATA_SIZE,			\
+	.eeprom_ver = EEPROM_6005_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_6005_TX_POWER_VERSION,	\
+	.base_params = &iwl6000_g2_base_params,			\
+	.eeprom_params = &iwl6000_eeprom_params,		\
+	.need_temp_offset_calib = true,				\
+	.led_mode = IWL_LED_RF_STATE
+
+const struct iwl_cfg iwl6005_2agn_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6205 AGN",
+	IWL_DEVICE_6005,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6005_2abg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6205 ABG",
+	IWL_DEVICE_6005,
+};
+
+const struct iwl_cfg iwl6005_2bg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6205 BG",
+	IWL_DEVICE_6005,
+};
+
+const struct iwl_cfg iwl6005_2agn_sff_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6205S AGN",
+	IWL_DEVICE_6005,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6005_2agn_d_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6205D AGN",
+	IWL_DEVICE_6005,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6005_2agn_mow1_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6206 AGN",
+	IWL_DEVICE_6005,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6005_2agn_mow2_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6207 AGN",
+	IWL_DEVICE_6005,
+	.ht_params = &iwl6000_ht_params,
+};
+
+#define IWL_DEVICE_6030						\
+	.fw_name_pre = IWL6030_FW_PRE,				\
+	.ucode_api_max = IWL6000G2_UCODE_API_MAX,		\
+	.ucode_api_ok = IWL6000G2B_UCODE_API_OK,		\
+	.ucode_api_min = IWL6000G2_UCODE_API_MIN,		\
+	.device_family = IWL_DEVICE_FAMILY_6030,		\
+	.max_inst_size = IWL60_RTC_INST_SIZE,			\
+	.max_data_size = IWL60_RTC_DATA_SIZE,			\
+	.eeprom_ver = EEPROM_6030_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION,	\
+	.base_params = &iwl6000_g2_base_params,			\
+	.bt_params = &iwl6000_bt_params,			\
+	.eeprom_params = &iwl6000_eeprom_params,		\
+	.need_temp_offset_calib = true,				\
+	.led_mode = IWL_LED_RF_STATE,				\
+	.adv_pm = true						\
+
+const struct iwl_cfg iwl6030_2agn_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6230 AGN",
+	IWL_DEVICE_6030,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6030_2abg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6230 ABG",
+	IWL_DEVICE_6030,
+};
+
+const struct iwl_cfg iwl6030_2bgn_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6230 BGN",
+	IWL_DEVICE_6030,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6030_2bg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6230 BG",
+	IWL_DEVICE_6030,
+};
+
+#define IWL_DEVICE_6035						\
+	.fw_name_pre = IWL6030_FW_PRE,				\
+	.ucode_api_max = IWL6035_UCODE_API_MAX,			\
+	.ucode_api_ok = IWL6035_UCODE_API_OK,			\
+	.ucode_api_min = IWL6035_UCODE_API_MIN,			\
+	.device_family = IWL_DEVICE_FAMILY_6030,		\
+	.max_inst_size = IWL60_RTC_INST_SIZE,			\
+	.max_data_size = IWL60_RTC_DATA_SIZE,			\
+	.eeprom_ver = EEPROM_6030_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION,	\
+	.base_params = &iwl6000_g2_base_params,			\
+	.bt_params = &iwl6000_bt_params,			\
+	.eeprom_params = &iwl6000_eeprom_params,		\
+	.need_temp_offset_calib = true,				\
+	.led_mode = IWL_LED_RF_STATE,				\
+	.adv_pm = true
+
+const struct iwl_cfg iwl6035_2agn_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6235 AGN",
+	IWL_DEVICE_6035,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl1030_bgn_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N 1030 BGN",
+	IWL_DEVICE_6030,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl1030_bg_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N 1030 BG",
+	IWL_DEVICE_6030,
+};
+
+const struct iwl_cfg iwl130_bgn_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N 130 BGN",
+	IWL_DEVICE_6030,
+	.ht_params = &iwl6000_ht_params,
+	.rx_with_siso_diversity = true,
+};
+
+const struct iwl_cfg iwl130_bg_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N 130 BG",
+	IWL_DEVICE_6030,
+	.rx_with_siso_diversity = true,
+};
+
+/*
+ * "i": Internal configuration, use internal Power Amplifier
+ */
+#define IWL_DEVICE_6000i					\
+	.fw_name_pre = IWL6000_FW_PRE,				\
+	.ucode_api_max = IWL6000_UCODE_API_MAX,			\
+	.ucode_api_ok = IWL6000_UCODE_API_OK,			\
+	.ucode_api_min = IWL6000_UCODE_API_MIN,			\
+	.device_family = IWL_DEVICE_FAMILY_6000i,		\
+	.max_inst_size = IWL60_RTC_INST_SIZE,			\
+	.max_data_size = IWL60_RTC_DATA_SIZE,			\
+	.valid_tx_ant = ANT_BC,		/* .cfg overwrite */	\
+	.valid_rx_ant = ANT_BC,		/* .cfg overwrite */	\
+	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,	\
+	.base_params = &iwl6000_base_params,			\
+	.eeprom_params = &iwl6000_eeprom_params,		\
+	.led_mode = IWL_LED_BLINK
+
+const struct iwl_cfg iwl6000i_2agn_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6200 AGN",
+	IWL_DEVICE_6000i,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6000i_2abg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6200 ABG",
+	IWL_DEVICE_6000i,
+};
+
+const struct iwl_cfg iwl6000i_2bg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6200 BG",
+	IWL_DEVICE_6000i,
+};
+
+#define IWL_DEVICE_6050						\
+	.fw_name_pre = IWL6050_FW_PRE,				\
+	.ucode_api_max = IWL6050_UCODE_API_MAX,			\
+	.ucode_api_min = IWL6050_UCODE_API_MIN,			\
+	.device_family = IWL_DEVICE_FAMILY_6050,		\
+	.max_inst_size = IWL60_RTC_INST_SIZE,			\
+	.max_data_size = IWL60_RTC_DATA_SIZE,			\
+	.valid_tx_ant = ANT_AB,		/* .cfg overwrite */	\
+	.valid_rx_ant = ANT_AB,		/* .cfg overwrite */	\
+	.eeprom_ver = EEPROM_6050_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,	\
+	.base_params = &iwl6050_base_params,			\
+	.eeprom_params = &iwl6000_eeprom_params,		\
+	.led_mode = IWL_LED_BLINK,				\
+	.internal_wimax_coex = true
+
+const struct iwl_cfg iwl6050_2agn_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN",
+	IWL_DEVICE_6050,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6050_2abg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
+	IWL_DEVICE_6050,
+};
+
+#define IWL_DEVICE_6150						\
+	.fw_name_pre = IWL6050_FW_PRE,				\
+	.ucode_api_max = IWL6050_UCODE_API_MAX,			\
+	.ucode_api_min = IWL6050_UCODE_API_MIN,			\
+	.device_family = IWL_DEVICE_FAMILY_6150,		\
+	.max_inst_size = IWL60_RTC_INST_SIZE,			\
+	.max_data_size = IWL60_RTC_DATA_SIZE,			\
+	.eeprom_ver = EEPROM_6150_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION,	\
+	.base_params = &iwl6050_base_params,			\
+	.eeprom_params = &iwl6000_eeprom_params,		\
+	.led_mode = IWL_LED_BLINK,				\
+	.internal_wimax_coex = true
+
+const struct iwl_cfg iwl6150_bgn_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN",
+	IWL_DEVICE_6150,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6150_bg_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BG",
+	IWL_DEVICE_6150,
+};
+
+const struct iwl_cfg iwl6000_3agn_cfg = {
+	.name = "Intel(R) Centrino(R) Ultimate-N 6300 AGN",
+	.fw_name_pre = IWL6000_FW_PRE,
+	.ucode_api_max = IWL6000_UCODE_API_MAX,
+	.ucode_api_ok = IWL6000_UCODE_API_OK,
+	.ucode_api_min = IWL6000_UCODE_API_MIN,
+	.device_family = IWL_DEVICE_FAMILY_6000,
+	.max_inst_size = IWL60_RTC_INST_SIZE,
+	.max_data_size = IWL60_RTC_DATA_SIZE,
+	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
+	.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
+	.base_params = &iwl6000_base_params,
+	.eeprom_params = &iwl6000_eeprom_params,
+	.ht_params = &iwl6000_ht_params,
+	.led_mode = IWL_LED_BLINK,
+};
+
+MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_OK));
+MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_OK));
+MODULE_FIRMWARE(IWL6005_MODULE_FIRMWARE(IWL6000G2_UCODE_API_OK));
+MODULE_FIRMWARE(IWL6030_MODULE_FIRMWARE(IWL6000G2B_UCODE_API_OK));