Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem

39 files changed, 754 insertions, 14506 deletions

diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index e1e3b1cf3cf..17d555f2215 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -1,18 +1,52 @@
-config IWLWIFI
-	tristate "Intel Wireless Wifi"
+config IWLAGN
+	tristate "Intel Wireless WiFi Next Gen AGN - Wireless-N/Advanced-N/Ultimate-N (iwlagn) "
 	depends on PCI && MAC80211
 	select FW_LOADER
 	select NEW_LEDS
 	select LEDS_CLASS
 	select LEDS_TRIGGERS
 	select MAC80211_LEDS
+	---help---
+	  Select to build the driver supporting the:
+
+	  Intel Wireless WiFi Link Next-Gen AGN
+
+	  This option enables support for use with the following hardware:
+		Intel Wireless WiFi Link 6250AGN Adapter
+		Intel 6000 Series Wi-Fi Adapters (6200AGN and 6300AGN)
+		Intel WiFi Link 1000BGN
+		Intel Wireless WiFi 5150AGN
+		Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN
+		Intel 6005 Series Wi-Fi Adapters
+		Intel 6030 Series Wi-Fi Adapters
+		Intel Wireless WiFi Link 6150BGN 2 Adapter
+		Intel 100 Series Wi-Fi Adapters (100BGN and 130BGN)
+		Intel 2000 Series Wi-Fi Adapters
+
+
+	  This driver uses the kernel's mac80211 subsystem.
+
+	  In order to use this driver, you will need a microcode (uCode)
+	  image for it. You can obtain the microcode from:
+
+	          <http://intellinuxwireless.org/>.
+
+	  The microcode is typically installed in /lib/firmware. You can
+	  look in the hotplug script /etc/hotplug/firmware.agent to
+	  determine which directory FIRMWARE_DIR is set to when the script
+	  runs.
+
+	  If you want to compile the driver as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/kbuild/modules.txt>.  The
+	  module will be called iwlagn.
 
 menu "Debugging Options"
-	depends on IWLWIFI
+	depends on IWLAGN
 
 config IWLWIFI_DEBUG
-	bool "Enable full debugging output in iwlagn and iwl3945 drivers"
-	depends on IWLWIFI
+	bool "Enable full debugging output in the iwlagn driver"
+	depends on IWLAGN
 	---help---
 	  This option will enable debug tracing output for the iwlwifi drivers
 
@@ -37,7 +71,7 @@ config IWLWIFI_DEBUG
 
 config IWLWIFI_DEBUGFS
         bool "iwlagn debugfs support"
-        depends on IWLWIFI && MAC80211_DEBUGFS
+        depends on IWLAGN && MAC80211_DEBUGFS
         ---help---
 	  Enable creation of debugfs files for the iwlwifi drivers. This
 	  is a low-impact option that allows getting insight into the
@@ -45,13 +79,13 @@ config IWLWIFI_DEBUGFS
 
 config IWLWIFI_DEBUG_EXPERIMENTAL_UCODE
         bool "Experimental uCode support"
-        depends on IWLWIFI && IWLWIFI_DEBUG
+        depends on IWLAGN && IWLWIFI_DEBUG
         ---help---
 	  Enable use of experimental ucode for testing and debugging.
 
 config IWLWIFI_DEVICE_TRACING
 	bool "iwlwifi device access tracing"
-	depends on IWLWIFI
+	depends on IWLAGN
 	depends on EVENT_TRACING
 	help
 	  Say Y here to trace all commands, including TX frames and IO
@@ -68,57 +102,9 @@ config IWLWIFI_DEVICE_TRACING
 	  occur.
 endmenu
 
-config IWLAGN
-	tristate "Intel Wireless WiFi Next Gen AGN (iwlagn)"
-	depends on IWLWIFI
-	---help---
-	  Select to build the driver supporting the:
-
-	  Intel Wireless WiFi Link Next-Gen AGN
-
-	  This driver uses the kernel's mac80211 subsystem.
-
-	  In order to use this driver, you will need a microcode (uCode)
-	  image for it. You can obtain the microcode from:
-
-	          <http://intellinuxwireless.org/>.
-
-	  The microcode is typically installed in /lib/firmware. You can
-	  look in the hotplug script /etc/hotplug/firmware.agent to
-	  determine which directory FIRMWARE_DIR is set to when the script
-	  runs.
-
-	  If you want to compile the driver as a module ( = code which can be
-	  inserted in and removed from the running kernel whenever you want),
-	  say M here and read <file:Documentation/kbuild/modules.txt>.  The
-	  module will be called iwlagn.
-
-
-config IWL4965
-	bool "Intel Wireless WiFi 4965AGN"
-	depends on IWLAGN
-	---help---
-	  This option enables support for Intel Wireless WiFi Link 4965AGN
-
-config IWL5000
-	bool "Intel Wireless-N/Advanced-N/Ultimate-N WiFi Link"
-	depends on IWLAGN
-	---help---
-	  This option enables support for use with the following hardware:
-		Intel Wireless WiFi Link 6250AGN Adapter
-		Intel 6000 Series Wi-Fi Adapters (6200AGN and 6300AGN)
-		Intel WiFi Link 1000BGN
-		Intel Wireless WiFi 5150AGN
-		Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN
-		Intel 6005 Series Wi-Fi Adapters
-		Intel 6030 Series Wi-Fi Adapters
-		Intel Wireless WiFi Link 6150BGN 2 Adapter
-		Intel 100 Series Wi-Fi Adapters (100BGN and 130BGN)
-		Intel 2000 Series Wi-Fi Adapters
-
 config IWL_P2P
 	bool "iwlwifi experimental P2P support"
-	depends on IWL5000
+	depends on IWLAGN
 	help
 	  This option enables experimental P2P support for some devices
 	  based on microcode support. Since P2P support is still under
@@ -132,27 +118,3 @@ config IWL_P2P
 
 	  Say Y only if you want to experiment with P2P.
 
-config IWL3945
-	tristate "Intel PRO/Wireless 3945ABG/BG Network Connection (iwl3945)"
-	depends on IWLWIFI
-	---help---
-	  Select to build the driver supporting the:
-
-	  Intel PRO/Wireless 3945ABG/BG Network Connection
-
-	  This driver uses the kernel's mac80211 subsystem.
-
-	  In order to use this driver, you will need a microcode (uCode)
-	  image for it. You can obtain the microcode from:
-
-	          <http://intellinuxwireless.org/>.
-
-	  The microcode is typically installed in /lib/firmware. You can
-	  look in the hotplug script /etc/hotplug/firmware.agent to
-	  determine which directory FIRMWARE_DIR is set to when the script
-	  runs.
-
-	  If you want to compile the driver as a module ( = code which can be
-	  inserted in and removed from the running kernel whenever you want),
-	  say M here and read <file:Documentation/kbuild/modules.txt>.  The
-	  module will be called iwl3945.
diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile
index 25be742c69c..9d6ee836426 100644
--- a/drivers/net/wireless/iwlwifi/Makefile
+++ b/drivers/net/wireless/iwlwifi/Makefile
@@ -1,36 +1,23 @@
-obj-$(CONFIG_IWLWIFI)	+= iwlcore.o
-iwlcore-objs 		:= iwl-core.o iwl-eeprom.o iwl-hcmd.o iwl-power.o
-iwlcore-objs 		+= iwl-rx.o iwl-tx.o iwl-sta.o
-iwlcore-objs 		+= iwl-scan.o iwl-led.o
-iwlcore-$(CONFIG_IWL3945) += iwl-legacy.o
-iwlcore-$(CONFIG_IWL4965) += iwl-legacy.o
-iwlcore-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o
-iwlcore-$(CONFIG_IWLWIFI_DEVICE_TRACING) += iwl-devtrace.o
-
-# If 3945 is selected only, iwl-legacy.o will be added
-# to iwlcore-m above, but it needs to be built in.
-iwlcore-objs += $(iwlcore-m)
-
-CFLAGS_iwl-devtrace.o := -I$(src)
-
 # AGN
 obj-$(CONFIG_IWLAGN)	+= iwlagn.o
 iwlagn-objs		:= iwl-agn.o iwl-agn-rs.o iwl-agn-led.o
 iwlagn-objs		+= iwl-agn-ucode.o iwl-agn-tx.o
-iwlagn-objs		+= iwl-agn-lib.o iwl-agn-rx.o iwl-agn-calib.o
+iwlagn-objs		+= iwl-agn-lib.o iwl-agn-calib.o
 iwlagn-objs		+= iwl-agn-tt.o iwl-agn-sta.o iwl-agn-eeprom.o
-iwlagn-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-agn-debugfs.o
 
-iwlagn-$(CONFIG_IWL4965) += iwl-4965.o
-iwlagn-$(CONFIG_IWL5000) += iwl-agn-rxon.o iwl-agn-hcmd.o iwl-agn-ict.o
-iwlagn-$(CONFIG_IWL5000) += iwl-5000.o
-iwlagn-$(CONFIG_IWL5000) += iwl-6000.o
-iwlagn-$(CONFIG_IWL5000) += iwl-1000.o
-iwlagn-$(CONFIG_IWL5000) += iwl-2000.o
+iwlagn-objs 		+= iwl-core.o iwl-eeprom.o iwl-hcmd.o iwl-power.o
+iwlagn-objs 		+= iwl-rx.o iwl-tx.o iwl-sta.o
+iwlagn-objs 		+= iwl-scan.o iwl-led.o
+iwlagn-objs             += iwl-agn-rxon.o iwl-agn-hcmd.o iwl-agn-ict.o
+iwlagn-objs             += iwl-5000.o
+iwlagn-objs             += iwl-6000.o
+iwlagn-objs             += iwl-1000.o
+iwlagn-objs             += iwl-2000.o
+
+iwlagn-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-agn-debugfs.o
+iwlagn-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o
+iwlagn-$(CONFIG_IWLWIFI_DEVICE_TRACING) += iwl-devtrace.o
 
-# 3945
-obj-$(CONFIG_IWL3945)	+= iwl3945.o
-iwl3945-objs		:= iwl3945-base.o iwl-3945.o iwl-3945-rs.o iwl-3945-led.o
-iwl3945-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-3945-debugfs.o
+CFLAGS_iwl-devtrace.o := -I$(src)
 
 ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index ba78bc8a259..e8e1c2dc865 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -232,8 +232,6 @@ static struct iwl_lib_ops iwl1000_lib = {
 		.bt_stats_read = iwl_ucode_bt_stats_read,
 		.reply_tx_error = iwl_reply_tx_error_read,
 	},
-	.check_plcp_health = iwl_good_plcp_health,
-	.check_ack_health = iwl_good_ack_health,
 	.txfifo_flush = iwlagn_txfifo_flush,
 	.dev_txfifo_flush = iwlagn_dev_txfifo_flush,
 	.tt_ops = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-2000.c b/drivers/net/wireless/iwlwifi/iwl-2000.c
index 30483e27ce5..d7b6126408c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-2000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-2000.c
@@ -315,8 +315,6 @@ static struct iwl_lib_ops iwl2000_lib = {
 		.bt_stats_read = iwl_ucode_bt_stats_read,
 		.reply_tx_error = iwl_reply_tx_error_read,
 	},
-	.check_plcp_health = iwl_good_plcp_health,
-	.check_ack_health = iwl_good_ack_health,
 	.txfifo_flush = iwlagn_txfifo_flush,
 	.dev_txfifo_flush = iwlagn_dev_txfifo_flush,
 	.tt_ops = {
@@ -418,6 +416,7 @@ static struct iwl_bt_params iwl2030_bt_params = {
 	.bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
 	.bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
 	.bt_sco_disable = true,
+	.bt_session_2 = true,
 };
 
 #define IWL_DEVICE_2000						\
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c
deleted file mode 100644
index ef0835b01b6..00000000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c
+++ /dev/null
@@ -1,522 +0,0 @@
-/******************************************************************************
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *****************************************************************************/
-
-#include "iwl-3945-debugfs.h"
-
-
-static int iwl3945_statistics_flag(struct iwl_priv *priv, char *buf, int bufsz)
-{
-	int p = 0;
-
-	p += scnprintf(buf + p, bufsz - p, "Statistics Flag(0x%X):\n",
-		       le32_to_cpu(priv->_3945.statistics.flag));
-	if (le32_to_cpu(priv->_3945.statistics.flag) &
-			UCODE_STATISTICS_CLEAR_MSK)
-		p += scnprintf(buf + p, bufsz - p,
-			       "\tStatistics have been cleared\n");
-	p += scnprintf(buf + p, bufsz - p, "\tOperational Frequency: %s\n",
-		       (le32_to_cpu(priv->_3945.statistics.flag) &
-			UCODE_STATISTICS_FREQUENCY_MSK)
-			? "2.4 GHz" : "5.2 GHz");
-	p += scnprintf(buf + p, bufsz - p, "\tTGj Narrow Band: %s\n",
-		       (le32_to_cpu(priv->_3945.statistics.flag) &
-			UCODE_STATISTICS_NARROW_BAND_MSK)
-			? "enabled" : "disabled");
-	return p;
-}
-
-ssize_t iwl3945_ucode_rx_stats_read(struct file *file,
-				    char __user *user_buf,
-				    size_t count, loff_t *ppos)
-{
-	struct iwl_priv *priv = file->private_data;
-	int pos = 0;
-	char *buf;
-	int bufsz = sizeof(struct iwl39_statistics_rx_phy) * 40 +
-		    sizeof(struct iwl39_statistics_rx_non_phy) * 40 + 400;
-	ssize_t ret;
-	struct iwl39_statistics_rx_phy *ofdm, *accum_ofdm, *delta_ofdm, *max_ofdm;
-	struct iwl39_statistics_rx_phy *cck, *accum_cck, *delta_cck, *max_cck;
-	struct iwl39_statistics_rx_non_phy *general, *accum_general;
-	struct iwl39_statistics_rx_non_phy *delta_general, *max_general;
-
-	if (!iwl_is_alive(priv))
-		return -EAGAIN;
-
-	buf = kzalloc(bufsz, GFP_KERNEL);
-	if (!buf) {
-		IWL_ERR(priv, "Can not allocate Buffer\n");
-		return -ENOMEM;
-	}
-
-	/*
-	 * The statistic information display here is based on
-	 * the last statistics notification from uCode
-	 * might not reflect the current uCode activity
-	 */
-	ofdm = &priv->_3945.statistics.rx.ofdm;
-	cck = &priv->_3945.statistics.rx.cck;
-	general = &priv->_3945.statistics.rx.general;
-	accum_ofdm = &priv->_3945.accum_statistics.rx.ofdm;
-	accum_cck = &priv->_3945.accum_statistics.rx.cck;
-	accum_general = &priv->_3945.accum_statistics.rx.general;
-	delta_ofdm = &priv->_3945.delta_statistics.rx.ofdm;
-	delta_cck = &priv->_3945.delta_statistics.rx.cck;
-	delta_general = &priv->_3945.delta_statistics.rx.general;
-	max_ofdm = &priv->_3945.max_delta.rx.ofdm;
-	max_cck = &priv->_3945.max_delta.rx.cck;
-	max_general = &priv->_3945.max_delta.rx.general;
-
-	pos += iwl3945_statistics_flag(priv, buf, bufsz);
-	pos += scnprintf(buf + pos, bufsz - pos, "%-32s     current"
-			 "acumulative       delta         max\n",
-			 "Statistics_Rx - OFDM:");
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "ina_cnt:", le32_to_cpu(ofdm->ina_cnt),
-			 accum_ofdm->ina_cnt,
-			 delta_ofdm->ina_cnt, max_ofdm->ina_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "fina_cnt:",
-			 le32_to_cpu(ofdm->fina_cnt), accum_ofdm->fina_cnt,
-			 delta_ofdm->fina_cnt, max_ofdm->fina_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n", "plcp_err:",
-			 le32_to_cpu(ofdm->plcp_err), accum_ofdm->plcp_err,
-			 delta_ofdm->plcp_err, max_ofdm->plcp_err);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",  "crc32_err:",
-			 le32_to_cpu(ofdm->crc32_err), accum_ofdm->crc32_err,
-			 delta_ofdm->crc32_err, max_ofdm->crc32_err);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n", "overrun_err:",
-			 le32_to_cpu(ofdm->overrun_err),
-			 accum_ofdm->overrun_err, delta_ofdm->overrun_err,
-			 max_ofdm->overrun_err);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "early_overrun_err:",
-			 le32_to_cpu(ofdm->early_overrun_err),
-			 accum_ofdm->early_overrun_err,
-			 delta_ofdm->early_overrun_err,
-			 max_ofdm->early_overrun_err);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "crc32_good:", le32_to_cpu(ofdm->crc32_good),
-			 accum_ofdm->crc32_good, delta_ofdm->crc32_good,
-			 max_ofdm->crc32_good);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n", "false_alarm_cnt:",
-			 le32_to_cpu(ofdm->false_alarm_cnt),
-			 accum_ofdm->false_alarm_cnt,
-			 delta_ofdm->false_alarm_cnt,
-			 max_ofdm->false_alarm_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "fina_sync_err_cnt:",
-			 le32_to_cpu(ofdm->fina_sync_err_cnt),
-			 accum_ofdm->fina_sync_err_cnt,
-			 delta_ofdm->fina_sync_err_cnt,
-			 max_ofdm->fina_sync_err_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "sfd_timeout:",
-			 le32_to_cpu(ofdm->sfd_timeout),
-			 accum_ofdm->sfd_timeout,
-			 delta_ofdm->sfd_timeout,
-			 max_ofdm->sfd_timeout);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "fina_timeout:",
-			 le32_to_cpu(ofdm->fina_timeout),
-			 accum_ofdm->fina_timeout,
-			 delta_ofdm->fina_timeout,
-			 max_ofdm->fina_timeout);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "unresponded_rts:",
-			 le32_to_cpu(ofdm->unresponded_rts),
-			 accum_ofdm->unresponded_rts,
-			 delta_ofdm->unresponded_rts,
-			 max_ofdm->unresponded_rts);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "rxe_frame_lmt_ovrun:",
-			 le32_to_cpu(ofdm->rxe_frame_limit_overrun),
-			 accum_ofdm->rxe_frame_limit_overrun,
-			 delta_ofdm->rxe_frame_limit_overrun,
-			 max_ofdm->rxe_frame_limit_overrun);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "sent_ack_cnt:",
-			 le32_to_cpu(ofdm->sent_ack_cnt),
-			 accum_ofdm->sent_ack_cnt,
-			 delta_ofdm->sent_ack_cnt,
-			 max_ofdm->sent_ack_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "sent_cts_cnt:",
-			 le32_to_cpu(ofdm->sent_cts_cnt),
-			 accum_ofdm->sent_cts_cnt,
-			 delta_ofdm->sent_cts_cnt, max_ofdm->sent_cts_cnt);
-
-	pos += scnprintf(buf + pos, bufsz - pos, "%-32s     current"
-			 "acumulative       delta         max\n",
-			 "Statistics_Rx - CCK:");
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "ina_cnt:",
-			 le32_to_cpu(cck->ina_cnt), accum_cck->ina_cnt,
-			 delta_cck->ina_cnt, max_cck->ina_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "fina_cnt:",
-			 le32_to_cpu(cck->fina_cnt), accum_cck->fina_cnt,
-			 delta_cck->fina_cnt, max_cck->fina_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "plcp_err:",
-			 le32_to_cpu(cck->plcp_err), accum_cck->plcp_err,
-			 delta_cck->plcp_err, max_cck->plcp_err);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "crc32_err:",
-			 le32_to_cpu(cck->crc32_err), accum_cck->crc32_err,
-			 delta_cck->crc32_err, max_cck->crc32_err);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "overrun_err:",
-			 le32_to_cpu(cck->overrun_err),
-			 accum_cck->overrun_err,
-			 delta_cck->overrun_err, max_cck->overrun_err);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "early_overrun_err:",
-			 le32_to_cpu(cck->early_overrun_err),
-			 accum_cck->early_overrun_err,
-			 delta_cck->early_overrun_err,
-			 max_cck->early_overrun_err);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "crc32_good:",
-			 le32_to_cpu(cck->crc32_good), accum_cck->crc32_good,
-			 delta_cck->crc32_good,
-			 max_cck->crc32_good);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "false_alarm_cnt:",
-			 le32_to_cpu(cck->false_alarm_cnt),
-			 accum_cck->false_alarm_cnt,
-			 delta_cck->false_alarm_cnt, max_cck->false_alarm_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "fina_sync_err_cnt:",
-			 le32_to_cpu(cck->fina_sync_err_cnt),
-			 accum_cck->fina_sync_err_cnt,
-			 delta_cck->fina_sync_err_cnt,
-			 max_cck->fina_sync_err_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "sfd_timeout:",
-			 le32_to_cpu(cck->sfd_timeout),
-			 accum_cck->sfd_timeout,
-			 delta_cck->sfd_timeout, max_cck->sfd_timeout);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "fina_timeout:",
-			 le32_to_cpu(cck->fina_timeout),
-			 accum_cck->fina_timeout,
-			 delta_cck->fina_timeout, max_cck->fina_timeout);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "unresponded_rts:",
-			 le32_to_cpu(cck->unresponded_rts),
-			 accum_cck->unresponded_rts,
-			 delta_cck->unresponded_rts,
-			 max_cck->unresponded_rts);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "rxe_frame_lmt_ovrun:",
-			 le32_to_cpu(cck->rxe_frame_limit_overrun),
-			 accum_cck->rxe_frame_limit_overrun,
-			 delta_cck->rxe_frame_limit_overrun,
-			 max_cck->rxe_frame_limit_overrun);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "sent_ack_cnt:",
-			 le32_to_cpu(cck->sent_ack_cnt),
-			 accum_cck->sent_ack_cnt,
-			 delta_cck->sent_ack_cnt,
-			 max_cck->sent_ack_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "sent_cts_cnt:",
-			 le32_to_cpu(cck->sent_cts_cnt),
-			 accum_cck->sent_cts_cnt,
-			 delta_cck->sent_cts_cnt,
-			 max_cck->sent_cts_cnt);
-
-	pos += scnprintf(buf + pos, bufsz - pos, "%-32s     current"
-			 "acumulative       delta         max\n",
-			 "Statistics_Rx - GENERAL:");
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "bogus_cts:",
-			 le32_to_cpu(general->bogus_cts),
-			 accum_general->bogus_cts,
-			 delta_general->bogus_cts, max_general->bogus_cts);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "bogus_ack:",
-			 le32_to_cpu(general->bogus_ack),
-			 accum_general->bogus_ack,
-			 delta_general->bogus_ack, max_general->bogus_ack);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "non_bssid_frames:",
-			 le32_to_cpu(general->non_bssid_frames),
-			 accum_general->non_bssid_frames,
-			 delta_general->non_bssid_frames,
-			 max_general->non_bssid_frames);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "filtered_frames:",
-			 le32_to_cpu(general->filtered_frames),
-			 accum_general->filtered_frames,
-			 delta_general->filtered_frames,
-			 max_general->filtered_frames);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "non_channel_beacons:",
-			 le32_to_cpu(general->non_channel_beacons),
-			 accum_general->non_channel_beacons,
-			 delta_general->non_channel_beacons,
-			 max_general->non_channel_beacons);
-
-	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
-	kfree(buf);
-	return ret;
-}
-
-ssize_t iwl3945_ucode_tx_stats_read(struct file *file,
-				    char __user *user_buf,
-				    size_t count, loff_t *ppos)
-{
-	struct iwl_priv *priv = file->private_data;
-	int pos = 0;
-	char *buf;
-	int bufsz = (sizeof(struct iwl39_statistics_tx) * 48) + 250;
-	ssize_t ret;
-	struct iwl39_statistics_tx *tx, *accum_tx, *delta_tx, *max_tx;
-
-	if (!iwl_is_alive(priv))
-		return -EAGAIN;
-
-	buf = kzalloc(bufsz, GFP_KERNEL);
-	if (!buf) {
-		IWL_ERR(priv, "Can not allocate Buffer\n");
-		return -ENOMEM;
-	}
-
-	/*
-	 * The statistic information display here is based on
-	 * the last statistics notification from uCode
-	 * might not reflect the current uCode activity
-	 */
-	tx = &priv->_3945.statistics.tx;
-	accum_tx = &priv->_3945.accum_statistics.tx;
-	delta_tx = &priv->_3945.delta_statistics.tx;
-	max_tx = &priv->_3945.max_delta.tx;
-	pos += iwl3945_statistics_flag(priv, buf, bufsz);
-	pos += scnprintf(buf + pos, bufsz - pos, "%-32s     current"
-			 "acumulative       delta         max\n",
-			 "Statistics_Tx:");
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "preamble:",
-			 le32_to_cpu(tx->preamble_cnt),
-			 accum_tx->preamble_cnt,
-			 delta_tx->preamble_cnt, max_tx->preamble_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "rx_detected_cnt:",
-			 le32_to_cpu(tx->rx_detected_cnt),
-			 accum_tx->rx_detected_cnt,
-			 delta_tx->rx_detected_cnt, max_tx->rx_detected_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "bt_prio_defer_cnt:",
-			 le32_to_cpu(tx->bt_prio_defer_cnt),
-			 accum_tx->bt_prio_defer_cnt,
-			 delta_tx->bt_prio_defer_cnt,
-			 max_tx->bt_prio_defer_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "bt_prio_kill_cnt:",
-			 le32_to_cpu(tx->bt_prio_kill_cnt),
-			 accum_tx->bt_prio_kill_cnt,
-			 delta_tx->bt_prio_kill_cnt,
-			 max_tx->bt_prio_kill_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "few_bytes_cnt:",
-			 le32_to_cpu(tx->few_bytes_cnt),
-			 accum_tx->few_bytes_cnt,
-			 delta_tx->few_bytes_cnt, max_tx->few_bytes_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "cts_timeout:",
-			 le32_to_cpu(tx->cts_timeout), accum_tx->cts_timeout,
-			 delta_tx->cts_timeout, max_tx->cts_timeout);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "ack_timeout:",
-			 le32_to_cpu(tx->ack_timeout),
-			 accum_tx->ack_timeout,
-			 delta_tx->ack_timeout, max_tx->ack_timeout);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "expected_ack_cnt:",
-			 le32_to_cpu(tx->expected_ack_cnt),
-			 accum_tx->expected_ack_cnt,
-			 delta_tx->expected_ack_cnt,
-			 max_tx->expected_ack_cnt);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "actual_ack_cnt:",
-			 le32_to_cpu(tx->actual_ack_cnt),
-			 accum_tx->actual_ack_cnt,
-			 delta_tx->actual_ack_cnt,
-			 max_tx->actual_ack_cnt);
-
-	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
-	kfree(buf);
-	return ret;
-}
-
-ssize_t iwl3945_ucode_general_stats_read(struct file *file,
-					 char __user *user_buf,
-					 size_t count, loff_t *ppos)
-{
-	struct iwl_priv *priv = file->private_data;
-	int pos = 0;
-	char *buf;
-	int bufsz = sizeof(struct iwl39_statistics_general) * 10 + 300;
-	ssize_t ret;
-	struct iwl39_statistics_general *general, *accum_general;
-	struct iwl39_statistics_general *delta_general, *max_general;
-	struct statistics_dbg *dbg, *accum_dbg, *delta_dbg, *max_dbg;
-	struct iwl39_statistics_div *div, *accum_div, *delta_div, *max_div;
-
-	if (!iwl_is_alive(priv))
-		return -EAGAIN;
-
-	buf = kzalloc(bufsz, GFP_KERNEL);
-	if (!buf) {
-		IWL_ERR(priv, "Can not allocate Buffer\n");
-		return -ENOMEM;
-	}
-
-	/*
-	 * The statistic information display here is based on
-	 * the last statistics notification from uCode
-	 * might not reflect the current uCode activity
-	 */
-	general = &priv->_3945.statistics.general;
-	dbg = &priv->_3945.statistics.general.dbg;
-	div = &priv->_3945.statistics.general.div;
-	accum_general = &priv->_3945.accum_statistics.general;
-	delta_general = &priv->_3945.delta_statistics.general;
-	max_general = &priv->_3945.max_delta.general;
-	accum_dbg = &priv->_3945.accum_statistics.general.dbg;
-	delta_dbg = &priv->_3945.delta_statistics.general.dbg;
-	max_dbg = &priv->_3945.max_delta.general.dbg;
-	accum_div = &priv->_3945.accum_statistics.general.div;
-	delta_div = &priv->_3945.delta_statistics.general.div;
-	max_div = &priv->_3945.max_delta.general.div;
-	pos += iwl3945_statistics_flag(priv, buf, bufsz);
-	pos += scnprintf(buf + pos, bufsz - pos, "%-32s     current"
-			 "acumulative       delta         max\n",
-			 "Statistics_General:");
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "burst_check:",
-			 le32_to_cpu(dbg->burst_check),
-			 accum_dbg->burst_check,
-			 delta_dbg->burst_check, max_dbg->burst_check);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "burst_count:",
-			 le32_to_cpu(dbg->burst_count),
-			 accum_dbg->burst_count,
-			 delta_dbg->burst_count, max_dbg->burst_count);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "sleep_time:",
-			 le32_to_cpu(general->sleep_time),
-			 accum_general->sleep_time,
-			 delta_general->sleep_time, max_general->sleep_time);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "slots_out:",
-			 le32_to_cpu(general->slots_out),
-			 accum_general->slots_out,
-			 delta_general->slots_out, max_general->slots_out);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "slots_idle:",
-			 le32_to_cpu(general->slots_idle),
-			 accum_general->slots_idle,
-			 delta_general->slots_idle, max_general->slots_idle);
-	pos += scnprintf(buf + pos, bufsz - pos, "ttl_timestamp:\t\t\t%u\n",
-			 le32_to_cpu(general->ttl_timestamp));
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "tx_on_a:",
-			 le32_to_cpu(div->tx_on_a), accum_div->tx_on_a,
-			 delta_div->tx_on_a, max_div->tx_on_a);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "tx_on_b:",
-			 le32_to_cpu(div->tx_on_b), accum_div->tx_on_b,
-			 delta_div->tx_on_b, max_div->tx_on_b);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "exec_time:",
-			 le32_to_cpu(div->exec_time), accum_div->exec_time,
-			 delta_div->exec_time, max_div->exec_time);
-	pos += scnprintf(buf + pos, bufsz - pos,
-			 "  %-30s %10u  %10u  %10u  %10u\n",
-			 "probe_time:",
-			 le32_to_cpu(div->probe_time), accum_div->probe_time,
-			 delta_div->probe_time, max_div->probe_time);
-	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
-	kfree(buf);
-	return ret;
-}
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h b/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h
deleted file mode 100644
index 70809c53c21..00000000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/******************************************************************************
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *****************************************************************************/
-
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-debug.h"
-
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-ssize_t iwl3945_ucode_rx_stats_read(struct file *file, char __user *user_buf,
-				    size_t count, loff_t *ppos);
-ssize_t iwl3945_ucode_tx_stats_read(struct file *file, char __user *user_buf,
-				    size_t count, loff_t *ppos);
-ssize_t iwl3945_ucode_general_stats_read(struct file *file,
-					 char __user *user_buf, size_t count,
-					 loff_t *ppos);
-#else
-static ssize_t iwl3945_ucode_rx_stats_read(struct file *file,
-					   char __user *user_buf, size_t count,
-					   loff_t *ppos)
-{
-	return 0;
-}
-static ssize_t iwl3945_ucode_tx_stats_read(struct file *file,
-					   char __user *user_buf, size_t count,
-					   loff_t *ppos)
-{
-	return 0;
-}
-static ssize_t iwl3945_ucode_general_stats_read(struct file *file,
-						char __user *user_buf,
-						size_t count, loff_t *ppos)
-{
-	return 0;
-}
-#endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-fh.h b/drivers/net/wireless/iwlwifi/iwl-3945-fh.h
deleted file mode 100644
index 2c9ed2b502a..00000000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945-fh.h
+++ /dev/null
@@ -1,188 +0,0 @@
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *  * Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *  * Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *  * Neither the name Intel Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-#ifndef __iwl_3945_fh_h__
-#define __iwl_3945_fh_h__
-
-/************************************/
-/* iwl3945 Flow Handler Definitions */
-/************************************/
-
-/**
- * This I/O area is directly read/writable by driver (e.g. Linux uses writel())
- * Addresses are offsets from device's PCI hardware base address.
- */
-#define FH39_MEM_LOWER_BOUND                   (0x0800)
-#define FH39_MEM_UPPER_BOUND                   (0x1000)
-
-#define FH39_CBCC_TABLE		(FH39_MEM_LOWER_BOUND + 0x140)
-#define FH39_TFDB_TABLE		(FH39_MEM_LOWER_BOUND + 0x180)
-#define FH39_RCSR_TABLE		(FH39_MEM_LOWER_BOUND + 0x400)
-#define FH39_RSSR_TABLE		(FH39_MEM_LOWER_BOUND + 0x4c0)
-#define FH39_TCSR_TABLE		(FH39_MEM_LOWER_BOUND + 0x500)
-#define FH39_TSSR_TABLE		(FH39_MEM_LOWER_BOUND + 0x680)
-
-/* TFDB (Transmit Frame Buffer Descriptor) */
-#define FH39_TFDB(_ch, buf)			(FH39_TFDB_TABLE + \
-						 ((_ch) * 2 + (buf)) * 0x28)
-#define FH39_TFDB_CHNL_BUF_CTRL_REG(_ch)	(FH39_TFDB_TABLE + 0x50 * (_ch))
-
-/* CBCC channel is [0,2] */
-#define FH39_CBCC(_ch)		(FH39_CBCC_TABLE + (_ch) * 0x8)
-#define FH39_CBCC_CTRL(_ch)	(FH39_CBCC(_ch) + 0x00)
-#define FH39_CBCC_BASE(_ch)	(FH39_CBCC(_ch) + 0x04)
-
-/* RCSR channel is [0,2] */
-#define FH39_RCSR(_ch)			(FH39_RCSR_TABLE + (_ch) * 0x40)
-#define FH39_RCSR_CONFIG(_ch)		(FH39_RCSR(_ch) + 0x00)
-#define FH39_RCSR_RBD_BASE(_ch)		(FH39_RCSR(_ch) + 0x04)
-#define FH39_RCSR_WPTR(_ch)		(FH39_RCSR(_ch) + 0x20)
-#define FH39_RCSR_RPTR_ADDR(_ch)	(FH39_RCSR(_ch) + 0x24)
-
-#define FH39_RSCSR_CHNL0_WPTR		(FH39_RCSR_WPTR(0))
-
-/* RSSR */
-#define FH39_RSSR_CTRL			(FH39_RSSR_TABLE + 0x000)
-#define FH39_RSSR_STATUS		(FH39_RSSR_TABLE + 0x004)
-
-/* TCSR */
-#define FH39_TCSR(_ch)			(FH39_TCSR_TABLE + (_ch) * 0x20)
-#define FH39_TCSR_CONFIG(_ch)		(FH39_TCSR(_ch) + 0x00)
-#define FH39_TCSR_CREDIT(_ch)		(FH39_TCSR(_ch) + 0x04)
-#define FH39_TCSR_BUFF_STTS(_ch)	(FH39_TCSR(_ch) + 0x08)
-
-/* TSSR */
-#define FH39_TSSR_CBB_BASE        (FH39_TSSR_TABLE + 0x000)
-#define FH39_TSSR_MSG_CONFIG      (FH39_TSSR_TABLE + 0x008)
-#define FH39_TSSR_TX_STATUS       (FH39_TSSR_TABLE + 0x010)
-
-
-/* DBM */
-
-#define FH39_SRVC_CHNL                            (6)
-
-#define FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE     (20)
-#define FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH      (4)
-
-#define FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN    (0x08000000)
-
-#define FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE        (0x80000000)
-
-#define FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE           (0x20000000)
-
-#define FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128		(0x01000000)
-
-#define FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST		(0x00001000)
-
-#define FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH			(0x00000000)
-
-#define FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF		(0x00000000)
-#define FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_DRIVER		(0x00000001)
-
-#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE_VAL	(0x00000000)
-#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL	(0x00000008)
-
-#define FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD		(0x00200000)
-
-#define FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT		(0x00000000)
-
-#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE		(0x00000000)
-#define FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE		(0x80000000)
-
-#define FH39_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID		(0x00004000)
-
-#define FH39_TCSR_CHNL_TX_BUF_STS_REG_BIT_TFDB_WPTR		(0x00000001)
-
-#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON	(0xFF000000)
-#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON	(0x00FF0000)
-
-#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B	(0x00000400)
-
-#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON		(0x00000100)
-#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON		(0x00000080)
-
-#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH	(0x00000020)
-#define FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH		(0x00000005)
-
-#define FH39_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_ch)	(BIT(_ch) << 24)
-#define FH39_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_ch)	(BIT(_ch) << 16)
-
-#define FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_ch) \
-	(FH39_TSSR_TX_STATUS_REG_BIT_BUFS_EMPTY(_ch) | \
-	 FH39_TSSR_TX_STATUS_REG_BIT_NO_PEND_REQ(_ch))
-
-#define FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE			(0x01000000)
-
-struct iwl3945_tfd_tb {
-	__le32 addr;
-	__le32 len;
-} __packed;
-
-struct iwl3945_tfd {
-	__le32 control_flags;
-	struct iwl3945_tfd_tb tbs[4];
-	u8 __pad[28];
-} __packed;
-
-
-#endif /* __iwl_3945_fh_h__ */
-
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
deleted file mode 100644
index 65b5834da28..00000000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
+++ /dev/null
@@ -1,294 +0,0 @@
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *  * Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *  * Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *  * Neither the name Intel Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-/*
- * Please use this file (iwl-3945-hw.h) only for hardware-related definitions.
- * Please use iwl-commands.h for uCode API definitions.
- * Please use iwl-3945.h for driver implementation definitions.
- */
-
-#ifndef __iwl_3945_hw__
-#define __iwl_3945_hw__
-
-#include "iwl-eeprom.h"
-
-/* RSSI to dBm */
-#define IWL39_RSSI_OFFSET	95
-
-#define IWL_DEFAULT_TX_POWER	0x0F
-
-/*
- * EEPROM related constants, enums, and structures.
- */
-#define EEPROM_SKU_CAP_OP_MODE_MRC                      (1 << 7)
-
-/*
- * Mapping of a Tx power level, at factory calibration temperature,
- *   to a radio/DSP gain table index.
- * One for each of 5 "sample" power levels in each band.
- * v_det is measured at the factory, using the 3945's built-in power amplifier
- *   (PA) output voltage detector.  This same detector is used during Tx of
- *   long packets in normal operation to provide feedback as to proper output
- *   level.
- * Data copied from EEPROM.
- * DO NOT ALTER THIS STRUCTURE!!!
- */
-struct iwl3945_eeprom_txpower_sample {
-	u8 gain_index;		/* index into power (gain) setup table ... */
-	s8 power;		/* ... for this pwr level for this chnl group */
-	u16 v_det;		/* PA output voltage */
-} __packed;
-
-/*
- * Mappings of Tx power levels -> nominal radio/DSP gain table indexes.
- * One for each channel group (a.k.a. "band") (1 for BG, 4 for A).
- * Tx power setup code interpolates between the 5 "sample" power levels
- *    to determine the nominal setup for a requested power level.
- * Data copied from EEPROM.
- * DO NOT ALTER THIS STRUCTURE!!!
- */
-struct iwl3945_eeprom_txpower_group {
-	struct iwl3945_eeprom_txpower_sample samples[5];  /* 5 power levels */
-	s32 a, b, c, d, e;	/* coefficients for voltage->power
-				 * formula (signed) */
-	s32 Fa, Fb, Fc, Fd, Fe;	/* these modify coeffs based on
-				 * frequency (signed) */
-	s8 saturation_power;	/* highest power possible by h/w in this
-				 * band */
-	u8 group_channel;	/* "representative" channel # in this band */
-	s16 temperature;	/* h/w temperature at factory calib this band
-				 * (signed) */
-} __packed;
-
-/*
- * Temperature-based Tx-power compensation data, not band-specific.
- * These coefficients are use to modify a/b/c/d/e coeffs based on
- *   difference between current temperature and factory calib temperature.
- * Data copied from EEPROM.
- */
-struct iwl3945_eeprom_temperature_corr {
-	u32 Ta;
-	u32 Tb;
-	u32 Tc;
-	u32 Td;
-	u32 Te;
-} __packed;
-
-/*
- * EEPROM map
- */
-struct iwl3945_eeprom {
-	u8 reserved0[16];
-	u16 device_id;	/* abs.ofs: 16 */
-	u8 reserved1[2];
-	u16 pmc;		/* abs.ofs: 20 */
-	u8 reserved2[20];
-	u8 mac_address[6];	/* abs.ofs: 42 */
-	u8 reserved3[58];
-	u16 board_revision;	/* abs.ofs: 106 */
-	u8 reserved4[11];
-	u8 board_pba_number[9];	/* abs.ofs: 119 */
-	u8 reserved5[8];
-	u16 version;		/* abs.ofs: 136 */
-	u8 sku_cap;		/* abs.ofs: 138 */
-	u8 leds_mode;		/* abs.ofs: 139 */
-	u16 oem_mode;
-	u16 wowlan_mode;	/* abs.ofs: 142 */
-	u16 leds_time_interval;	/* abs.ofs: 144 */
-	u8 leds_off_time;	/* abs.ofs: 146 */
-	u8 leds_on_time;	/* abs.ofs: 147 */
-	u8 almgor_m_version;	/* abs.ofs: 148 */
-	u8 antenna_switch_type;	/* abs.ofs: 149 */
-	u8 reserved6[42];
-	u8 sku_id[4];		/* abs.ofs: 192 */
-
-/*
- * Per-channel regulatory data.
- *
- * Each channel that *might* be supported by 3945 or 4965 has a fixed location
- * in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory
- * txpower (MSB).
- *
- * Entries immediately below are for 20 MHz channel width.  HT40 (40 MHz)
- * channels (only for 4965, not supported by 3945) appear later in the EEPROM.
- *
- * 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
- */
-	u16 band_1_count;	/* abs.ofs: 196 */
-	struct iwl_eeprom_channel band_1_channels[14];  /* abs.ofs: 198 */
-
-/*
- * 4.9 GHz channels 183, 184, 185, 187, 188, 189, 192, 196,
- * 5.0 GHz channels 7, 8, 11, 12, 16
- * (4915-5080MHz) (none of these is ever supported)
- */
-	u16 band_2_count;	/* abs.ofs: 226 */
-	struct iwl_eeprom_channel band_2_channels[13];  /* abs.ofs: 228 */
-
-/*
- * 5.2 GHz channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
- * (5170-5320MHz)
- */
-	u16 band_3_count;	/* abs.ofs: 254 */
-	struct iwl_eeprom_channel band_3_channels[12];  /* abs.ofs: 256 */
-
-/*
- * 5.5 GHz channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
- * (5500-5700MHz)
- */
-	u16 band_4_count;	/* abs.ofs: 280 */
-	struct iwl_eeprom_channel band_4_channels[11];  /* abs.ofs: 282 */
-
-/*
- * 5.7 GHz channels 145, 149, 153, 157, 161, 165
- * (5725-5825MHz)
- */
-	u16 band_5_count;	/* abs.ofs: 304 */
-	struct iwl_eeprom_channel band_5_channels[6];  /* abs.ofs: 306 */
-
-	u8 reserved9[194];
-
-/*
- * 3945 Txpower calibration data.
- */
-#define IWL_NUM_TX_CALIB_GROUPS 5
-	struct iwl3945_eeprom_txpower_group groups[IWL_NUM_TX_CALIB_GROUPS];
-/* abs.ofs: 512 */
-	struct iwl3945_eeprom_temperature_corr corrections;  /* abs.ofs: 832 */
-	u8 reserved16[172];	/* fill out to full 1024 byte block */
-} __packed;
-
-#define IWL3945_EEPROM_IMG_SIZE 1024
-
-/* End of EEPROM */
-
-#define PCI_CFG_REV_ID_BIT_BASIC_SKU                (0x40)	/* bit 6    */
-#define PCI_CFG_REV_ID_BIT_RTP                      (0x80)	/* bit 7    */
-
-/* 4 DATA + 1 CMD. There are 2 HCCA queues that are not used. */
-#define IWL39_NUM_QUEUES        5
-#define IWL39_CMD_QUEUE_NUM	4
-
-#define IWL_DEFAULT_TX_RETRY  15
-
-/*********************************************/
-
-#define RFD_SIZE                              4
-#define NUM_TFD_CHUNKS                        4
-
-#define RX_QUEUE_SIZE                         256
-#define RX_QUEUE_MASK                         255
-#define RX_QUEUE_SIZE_LOG                     8
-
-#define U32_PAD(n)		((4-(n))&0x3)
-
-#define TFD_CTL_COUNT_SET(n)       (n << 24)
-#define TFD_CTL_COUNT_GET(ctl)     ((ctl >> 24) & 7)
-#define TFD_CTL_PAD_SET(n)         (n << 28)
-#define TFD_CTL_PAD_GET(ctl)       (ctl >> 28)
-
-/* Sizes and addresses for instruction and data memory (SRAM) in
- * 3945's embedded processor.  Driver access is via HBUS_TARG_MEM_* regs. */
-#define IWL39_RTC_INST_LOWER_BOUND		(0x000000)
-#define IWL39_RTC_INST_UPPER_BOUND		(0x014000)
-
-#define IWL39_RTC_DATA_LOWER_BOUND		(0x800000)
-#define IWL39_RTC_DATA_UPPER_BOUND		(0x808000)
-
-#define IWL39_RTC_INST_SIZE (IWL39_RTC_INST_UPPER_BOUND - \
-				IWL39_RTC_INST_LOWER_BOUND)
-#define IWL39_RTC_DATA_SIZE (IWL39_RTC_DATA_UPPER_BOUND - \
-				IWL39_RTC_DATA_LOWER_BOUND)
-
-#define IWL39_MAX_INST_SIZE IWL39_RTC_INST_SIZE
-#define IWL39_MAX_DATA_SIZE IWL39_RTC_DATA_SIZE
-
-/* Size of uCode instruction memory in bootstrap state machine */
-#define IWL39_MAX_BSM_SIZE IWL39_RTC_INST_SIZE
-
-static inline int iwl3945_hw_valid_rtc_data_addr(u32 addr)
-{
-	return (addr >= IWL39_RTC_DATA_LOWER_BOUND) &&
-	       (addr < IWL39_RTC_DATA_UPPER_BOUND);
-}
-
-/* Base physical address of iwl3945_shared is provided to FH_TSSR_CBB_BASE
- * and &iwl3945_shared.rx_read_ptr[0] is provided to FH_RCSR_RPTR_ADDR(0) */
-struct iwl3945_shared {
-	__le32 tx_base_ptr[8];
-} __packed;
-
-static inline u8 iwl3945_hw_get_rate(__le16 rate_n_flags)
-{
-	return le16_to_cpu(rate_n_flags) & 0xFF;
-}
-
-static inline u16 iwl3945_hw_get_rate_n_flags(__le16 rate_n_flags)
-{
-	return le16_to_cpu(rate_n_flags);
-}
-
-static inline __le16 iwl3945_hw_set_rate_n_flags(u8 rate, u16 flags)
-{
-	return cpu_to_le16((u16)rate|flags);
-}
-#endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.c b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
deleted file mode 100644
index dc7c3a4167a..00000000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-#include <net/mac80211.h>
-#include <linux/etherdevice.h>
-#include <asm/unaligned.h>
-
-#include "iwl-commands.h"
-#include "iwl-3945.h"
-#include "iwl-core.h"
-#include "iwl-dev.h"
-#include "iwl-3945-led.h"
-
-
-/* Send led command */
-static int iwl3945_send_led_cmd(struct iwl_priv *priv,
-				struct iwl_led_cmd *led_cmd)
-{
-	struct iwl_host_cmd cmd = {
-		.id = REPLY_LEDS_CMD,
-		.len = sizeof(struct iwl_led_cmd),
-		.data = led_cmd,
-		.flags = CMD_ASYNC,
-		.callback = NULL,
-	};
-
-	return iwl_send_cmd(priv, &cmd);
-}
-
-const struct iwl_led_ops iwl3945_led_ops = {
-	.cmd = iwl3945_send_led_cmd,
-};
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.h b/drivers/net/wireless/iwlwifi/iwl-3945-led.h
deleted file mode 100644
index ce990adc51e..00000000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#ifndef __iwl_3945_led_h__
-#define __iwl_3945_led_h__
-
-extern const struct iwl_led_ops iwl3945_led_ops;
-
-#endif /* __iwl_3945_led_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
deleted file mode 100644
index 1f3e7e34fbc..00000000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
+++ /dev/null
@@ -1,995 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/skbuff.h>
-#include <linux/slab.h>
-#include <linux/wireless.h>
-#include <net/mac80211.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/delay.h>
-
-#include <linux/workqueue.h>
-
-#include "iwl-commands.h"
-#include "iwl-3945.h"
-#include "iwl-sta.h"
-
-#define RS_NAME "iwl-3945-rs"
-
-static s32 iwl3945_expected_tpt_g[IWL_RATE_COUNT_3945] = {
-	7, 13, 35, 58, 0, 0, 76, 104, 130, 168, 191, 202
-};
-
-static s32 iwl3945_expected_tpt_g_prot[IWL_RATE_COUNT_3945] = {
-	7, 13, 35, 58, 0, 0, 0, 80, 93, 113, 123, 125
-};
-
-static s32 iwl3945_expected_tpt_a[IWL_RATE_COUNT_3945] = {
-	0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186
-};
-
-static s32 iwl3945_expected_tpt_b[IWL_RATE_COUNT_3945] = {
-	7, 13, 35, 58, 0, 0, 0, 0, 0, 0, 0, 0
-};
-
-struct iwl3945_tpt_entry {
-	s8 min_rssi;
-	u8 index;
-};
-
-static struct iwl3945_tpt_entry iwl3945_tpt_table_a[] = {
-	{-60, IWL_RATE_54M_INDEX},
-	{-64, IWL_RATE_48M_INDEX},
-	{-72, IWL_RATE_36M_INDEX},
-	{-80, IWL_RATE_24M_INDEX},
-	{-84, IWL_RATE_18M_INDEX},
-	{-85, IWL_RATE_12M_INDEX},
-	{-87, IWL_RATE_9M_INDEX},
-	{-89, IWL_RATE_6M_INDEX}
-};
-
-static struct iwl3945_tpt_entry iwl3945_tpt_table_g[] = {
-	{-60, IWL_RATE_54M_INDEX},
-	{-64, IWL_RATE_48M_INDEX},
-	{-68, IWL_RATE_36M_INDEX},
-	{-80, IWL_RATE_24M_INDEX},
-	{-84, IWL_RATE_18M_INDEX},
-	{-85, IWL_RATE_12M_INDEX},
-	{-86, IWL_RATE_11M_INDEX},
-	{-88, IWL_RATE_5M_INDEX},
-	{-90, IWL_RATE_2M_INDEX},
-	{-92, IWL_RATE_1M_INDEX}
-};
-
-#define IWL_RATE_MAX_WINDOW          62
-#define IWL_RATE_FLUSH       	 (3*HZ)
-#define IWL_RATE_WIN_FLUSH       (HZ/2)
-#define IWL39_RATE_HIGH_TH          11520
-#define IWL_SUCCESS_UP_TH	   8960
-#define IWL_SUCCESS_DOWN_TH	  10880
-#define IWL_RATE_MIN_FAILURE_TH       6
-#define IWL_RATE_MIN_SUCCESS_TH       8
-#define IWL_RATE_DECREASE_TH       1920
-#define IWL_RATE_RETRY_TH	     15
-
-static u8 iwl3945_get_rate_index_by_rssi(s32 rssi, enum ieee80211_band band)
-{
-	u32 index = 0;
-	u32 table_size = 0;
-	struct iwl3945_tpt_entry *tpt_table = NULL;
-
-	if ((rssi < IWL_MIN_RSSI_VAL) || (rssi > IWL_MAX_RSSI_VAL))
-		rssi = IWL_MIN_RSSI_VAL;
-
-	switch (band) {
-	case IEEE80211_BAND_2GHZ:
-		tpt_table = iwl3945_tpt_table_g;
-		table_size = ARRAY_SIZE(iwl3945_tpt_table_g);
-		break;
-
-	case IEEE80211_BAND_5GHZ:
-		tpt_table = iwl3945_tpt_table_a;
-		table_size = ARRAY_SIZE(iwl3945_tpt_table_a);
-		break;
-
-	default:
-		BUG();
-		break;
-	}
-
-	while ((index < table_size) && (rssi < tpt_table[index].min_rssi))
-		index++;
-
-	index = min(index, (table_size - 1));
-
-	return tpt_table[index].index;
-}
-
-static void iwl3945_clear_window(struct iwl3945_rate_scale_data *window)
-{
-	window->data = 0;
-	window->success_counter = 0;
-	window->success_ratio = -1;
-	window->counter = 0;
-	window->average_tpt = IWL_INVALID_VALUE;
-	window->stamp = 0;
-}
-
-/**
- * iwl3945_rate_scale_flush_windows - flush out the rate scale windows
- *
- * Returns the number of windows that have gathered data but were
- * not flushed.  If there were any that were not flushed, then
- * reschedule the rate flushing routine.
- */
-static int iwl3945_rate_scale_flush_windows(struct iwl3945_rs_sta *rs_sta)
-{
-	int unflushed = 0;
-	int i;
-	unsigned long flags;
-	struct iwl_priv *priv __maybe_unused = rs_sta->priv;
-
-	/*
-	 * For each rate, if we have collected data on that rate
-	 * and it has been more than IWL_RATE_WIN_FLUSH
-	 * since we flushed, clear out the gathered statistics
-	 */
-	for (i = 0; i < IWL_RATE_COUNT_3945; i++) {
-		if (!rs_sta->win[i].counter)
-			continue;
-
-		spin_lock_irqsave(&rs_sta->lock, flags);
-		if (time_after(jiffies, rs_sta->win[i].stamp +
-			       IWL_RATE_WIN_FLUSH)) {
-			IWL_DEBUG_RATE(priv, "flushing %d samples of rate "
-				       "index %d\n",
-				       rs_sta->win[i].counter, i);
-			iwl3945_clear_window(&rs_sta->win[i]);
-		} else
-			unflushed++;
-		spin_unlock_irqrestore(&rs_sta->lock, flags);
-	}
-
-	return unflushed;
-}
-
-#define IWL_RATE_FLUSH_MAX              5000	/* msec */
-#define IWL_RATE_FLUSH_MIN              50	/* msec */
-#define IWL_AVERAGE_PACKETS             1500
-
-static void iwl3945_bg_rate_scale_flush(unsigned long data)
-{
-	struct iwl3945_rs_sta *rs_sta = (void *)data;
-	struct iwl_priv *priv __maybe_unused = rs_sta->priv;
-	int unflushed = 0;
-	unsigned long flags;
-	u32 packet_count, duration, pps;
-
-	IWL_DEBUG_RATE(priv, "enter\n");
-
-	unflushed = iwl3945_rate_scale_flush_windows(rs_sta);
-
-	spin_lock_irqsave(&rs_sta->lock, flags);
-
-	/* Number of packets Rx'd since last time this timer ran */
-	packet_count = (rs_sta->tx_packets - rs_sta->last_tx_packets) + 1;
-
-	rs_sta->last_tx_packets = rs_sta->tx_packets + 1;
-
-	if (unflushed) {
-		duration =
-		    jiffies_to_msecs(jiffies - rs_sta->last_partial_flush);
-
-		IWL_DEBUG_RATE(priv, "Tx'd %d packets in %dms\n",
-			       packet_count, duration);
-
-		/* Determine packets per second */
-		if (duration)
-			pps = (packet_count * 1000) / duration;
-		else
-			pps = 0;
-
-		if (pps) {
-			duration = (IWL_AVERAGE_PACKETS * 1000) / pps;
-			if (duration < IWL_RATE_FLUSH_MIN)
-				duration = IWL_RATE_FLUSH_MIN;
-			else if (duration > IWL_RATE_FLUSH_MAX)
-				duration = IWL_RATE_FLUSH_MAX;
-		} else
-			duration = IWL_RATE_FLUSH_MAX;
-
-		rs_sta->flush_time = msecs_to_jiffies(duration);
-
-		IWL_DEBUG_RATE(priv, "new flush period: %d msec ave %d\n",
-			       duration, packet_count);
-
-		mod_timer(&rs_sta->rate_scale_flush, jiffies +
-			  rs_sta->flush_time);
-
-		rs_sta->last_partial_flush = jiffies;
-	} else {
-		rs_sta->flush_time = IWL_RATE_FLUSH;
-		rs_sta->flush_pending = 0;
-	}
-	/* If there weren't any unflushed entries, we don't schedule the timer
-	 * to run again */
-
-	rs_sta->last_flush = jiffies;
-
-	spin_unlock_irqrestore(&rs_sta->lock, flags);
-
-	IWL_DEBUG_RATE(priv, "leave\n");
-}
-
-/**
- * iwl3945_collect_tx_data - Update the success/failure sliding window
- *
- * We keep a sliding window of the last 64 packets transmitted
- * at this rate.  window->data contains the bitmask of successful
- * packets.
- */
-static void iwl3945_collect_tx_data(struct iwl3945_rs_sta *rs_sta,
-				struct iwl3945_rate_scale_data *window,
-				int success, int retries, int index)
-{
-	unsigned long flags;
-	s32 fail_count;
-	struct iwl_priv *priv __maybe_unused = rs_sta->priv;
-
-	if (!retries) {
-		IWL_DEBUG_RATE(priv, "leave: retries == 0 -- should be at least 1\n");
-		return;
-	}
-
-	spin_lock_irqsave(&rs_sta->lock, flags);
-
-	/*
-	 * Keep track of only the latest 62 tx frame attempts in this rate's
-	 * history window; anything older isn't really relevant any more.
-	 * If we have filled up the sliding window, drop the oldest attempt;
-	 * if the oldest attempt (highest bit in bitmap) shows "success",
-	 * subtract "1" from the success counter (this is the main reason
-	 * we keep these bitmaps!).
-	 * */
-	while (retries > 0) {
-		if (window->counter >= IWL_RATE_MAX_WINDOW) {
-
-			/* remove earliest */
-			window->counter = IWL_RATE_MAX_WINDOW - 1;
-
-			if (window->data & (1ULL << (IWL_RATE_MAX_WINDOW - 1))) {
-				window->data &= ~(1ULL << (IWL_RATE_MAX_WINDOW - 1));
-				window->success_counter--;
-			}
-		}
-
-		/* Increment frames-attempted counter */
-		window->counter++;
-
-		/* Shift bitmap by one frame (throw away oldest history),
-		 * OR in "1", and increment "success" if this
-		 * frame was successful. */
-		window->data <<= 1;
-		if (success > 0) {
-			window->success_counter++;
-			window->data |= 0x1;
-			success--;
-		}
-
-		retries--;
-	}
-
-	/* Calculate current success ratio, avoid divide-by-0! */
-	if (window->counter > 0)
-		window->success_ratio = 128 * (100 * window->success_counter)
-					/ window->counter;
-	else
-		window->success_ratio = IWL_INVALID_VALUE;
-
-	fail_count = window->counter - window->success_counter;
-
-	/* Calculate average throughput, if we have enough history. */
-	if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) ||
-	    (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH))
-		window->average_tpt = ((window->success_ratio *
-				rs_sta->expected_tpt[index] + 64) / 128);
-	else
-		window->average_tpt = IWL_INVALID_VALUE;
-
-	/* Tag this window as having been updated */
-	window->stamp = jiffies;
-
-	spin_unlock_irqrestore(&rs_sta->lock, flags);
-
-}
-
-/*
- * Called after adding a new station to initialize rate scaling
- */
-void iwl3945_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 sta_id)
-{
-	struct ieee80211_hw *hw = priv->hw;
-	struct ieee80211_conf *conf = &priv->hw->conf;
-	struct iwl3945_sta_priv *psta;
-	struct iwl3945_rs_sta *rs_sta;
-	struct ieee80211_supported_band *sband;
-	int i;
-
-	IWL_DEBUG_INFO(priv, "enter\n");
-	if (sta_id == priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id)
-		goto out;
-
-	psta = (struct iwl3945_sta_priv *) sta->drv_priv;
-	rs_sta = &psta->rs_sta;
-	sband = hw->wiphy->bands[conf->channel->band];
-
-	rs_sta->priv = priv;
-
-	rs_sta->start_rate = IWL_RATE_INVALID;
-
-	/* default to just 802.11b */
-	rs_sta->expected_tpt = iwl3945_expected_tpt_b;
-
-	rs_sta->last_partial_flush = jiffies;
-	rs_sta->last_flush = jiffies;
-	rs_sta->flush_time = IWL_RATE_FLUSH;
-	rs_sta->last_tx_packets = 0;
-
-	rs_sta->rate_scale_flush.data = (unsigned long)rs_sta;
-	rs_sta->rate_scale_flush.function = iwl3945_bg_rate_scale_flush;
-
-	for (i = 0; i < IWL_RATE_COUNT_3945; i++)
-		iwl3945_clear_window(&rs_sta->win[i]);
-
-	/* TODO: what is a good starting rate for STA? About middle? Maybe not
-	 * the lowest or the highest rate.. Could consider using RSSI from
-	 * previous packets? Need to have IEEE 802.1X auth succeed immediately
-	 * after assoc.. */
-
-	for (i = sband->n_bitrates - 1; i >= 0; i--) {
-		if (sta->supp_rates[sband->band] & (1 << i)) {
-			rs_sta->last_txrate_idx = i;
-			break;
-		}
-	}
-
-	priv->_3945.sta_supp_rates = sta->supp_rates[sband->band];
-	/* For 5 GHz band it start at IWL_FIRST_OFDM_RATE */
-	if (sband->band == IEEE80211_BAND_5GHZ) {
-		rs_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE;
-		priv->_3945.sta_supp_rates = priv->_3945.sta_supp_rates <<
-						IWL_FIRST_OFDM_RATE;
-	}
-
-out:
-	priv->stations[sta_id].used &= ~IWL_STA_UCODE_INPROGRESS;
-
-	IWL_DEBUG_INFO(priv, "leave\n");
-}
-
-static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
-{
-	return hw->priv;
-}
-
-/* rate scale requires free function to be implemented */
-static void rs_free(void *priv)
-{
-	return;
-}
-
-static void *rs_alloc_sta(void *iwl_priv, struct ieee80211_sta *sta, gfp_t gfp)
-{
-	struct iwl3945_rs_sta *rs_sta;
-	struct iwl3945_sta_priv *psta = (void *) sta->drv_priv;
-	struct iwl_priv *priv __maybe_unused = iwl_priv;
-
-	IWL_DEBUG_RATE(priv, "enter\n");
-
-	rs_sta = &psta->rs_sta;
-
-	spin_lock_init(&rs_sta->lock);
-	init_timer(&rs_sta->rate_scale_flush);
-
-	IWL_DEBUG_RATE(priv, "leave\n");
-
-	return rs_sta;
-}
-
-static void rs_free_sta(void *iwl_priv, struct ieee80211_sta *sta,
-			void *priv_sta)
-{
-	struct iwl3945_rs_sta *rs_sta = priv_sta;
-
-	/*
-	 * Be careful not to use any members of iwl3945_rs_sta (like trying
-	 * to use iwl_priv to print out debugging) since it may not be fully
-	 * initialized at this point.
-	 */
-	del_timer_sync(&rs_sta->rate_scale_flush);
-}
-
-
-/**
- * rs_tx_status - Update rate control values based on Tx results
- *
- * NOTE: Uses iwl_priv->retry_rate for the # of retries attempted by
- * the hardware for each rate.
- */
-static void rs_tx_status(void *priv_rate, struct ieee80211_supported_band *sband,
-			 struct ieee80211_sta *sta, void *priv_sta,
-			 struct sk_buff *skb)
-{
-	s8 retries = 0, current_count;
-	int scale_rate_index, first_index, last_index;
-	unsigned long flags;
-	struct iwl_priv *priv = (struct iwl_priv *)priv_rate;
-	struct iwl3945_rs_sta *rs_sta = priv_sta;
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-
-	IWL_DEBUG_RATE(priv, "enter\n");
-
-	retries = info->status.rates[0].count;
-	/* Sanity Check for retries */
-	if (retries > IWL_RATE_RETRY_TH)
-		retries = IWL_RATE_RETRY_TH;
-
-	first_index = sband->bitrates[info->status.rates[0].idx].hw_value;
-	if ((first_index < 0) || (first_index >= IWL_RATE_COUNT_3945)) {
-		IWL_DEBUG_RATE(priv, "leave: Rate out of bounds: %d\n", first_index);
-		return;
-	}
-
-	if (!priv_sta) {
-		IWL_DEBUG_RATE(priv, "leave: No STA priv data to update!\n");
-		return;
-	}
-
-	/* Treat uninitialized rate scaling data same as non-existing. */
-	if (!rs_sta->priv) {
-		IWL_DEBUG_RATE(priv, "leave: STA priv data uninitialized!\n");
-		return;
-	}
-
-
-	rs_sta->tx_packets++;
-
-	scale_rate_index = first_index;
-	last_index = first_index;
-
-	/*
-	 * Update the window for each rate.  We determine which rates
-	 * were Tx'd based on the total number of retries vs. the number
-	 * of retries configured for each rate -- currently set to the
-	 * priv value 'retry_rate' vs. rate specific
-	 *
-	 * On exit from this while loop last_index indicates the rate
-	 * at which the frame was finally transmitted (or failed if no
-	 * ACK)
-	 */
-	while (retries > 1) {
-		if ((retries - 1) < priv->retry_rate) {
-			current_count = (retries - 1);
-			last_index = scale_rate_index;
-		} else {
-			current_count = priv->retry_rate;
-			last_index = iwl3945_rs_next_rate(priv,
-							 scale_rate_index);
-		}
-
-		/* Update this rate accounting for as many retries
-		 * as was used for it (per current_count) */
-		iwl3945_collect_tx_data(rs_sta,
-				    &rs_sta->win[scale_rate_index],
-				    0, current_count, scale_rate_index);
-		IWL_DEBUG_RATE(priv, "Update rate %d for %d retries.\n",
-			       scale_rate_index, current_count);
-
-		retries -= current_count;
-
-		scale_rate_index = last_index;
-	}
-
-
-	/* Update the last index window with success/failure based on ACK */
-	IWL_DEBUG_RATE(priv, "Update rate %d with %s.\n",
-		       last_index,
-		       (info->flags & IEEE80211_TX_STAT_ACK) ?
-		       "success" : "failure");
-	iwl3945_collect_tx_data(rs_sta,
-			    &rs_sta->win[last_index],
-			    info->flags & IEEE80211_TX_STAT_ACK, 1, last_index);
-
-	/* We updated the rate scale window -- if its been more than
-	 * flush_time since the last run, schedule the flush
-	 * again */
-	spin_lock_irqsave(&rs_sta->lock, flags);
-
-	if (!rs_sta->flush_pending &&
-	    time_after(jiffies, rs_sta->last_flush +
-		       rs_sta->flush_time)) {
-
-		rs_sta->last_partial_flush = jiffies;
-		rs_sta->flush_pending = 1;
-		mod_timer(&rs_sta->rate_scale_flush,
-			  jiffies + rs_sta->flush_time);
-	}
-
-	spin_unlock_irqrestore(&rs_sta->lock, flags);
-
-	IWL_DEBUG_RATE(priv, "leave\n");
-}
-
-static u16 iwl3945_get_adjacent_rate(struct iwl3945_rs_sta *rs_sta,
-				 u8 index, u16 rate_mask, enum ieee80211_band band)
-{
-	u8 high = IWL_RATE_INVALID;
-	u8 low = IWL_RATE_INVALID;
-	struct iwl_priv *priv __maybe_unused = rs_sta->priv;
-
-	/* 802.11A walks to the next literal adjacent rate in
-	 * the rate table */
-	if (unlikely(band == IEEE80211_BAND_5GHZ)) {
-		int i;
-		u32 mask;
-
-		/* Find the previous rate that is in the rate mask */
-		i = index - 1;
-		for (mask = (1 << i); i >= 0; i--, mask >>= 1) {
-			if (rate_mask & mask) {
-				low = i;
-				break;
-			}
-		}
-
-		/* Find the next rate that is in the rate mask */
-		i = index + 1;
-		for (mask = (1 << i); i < IWL_RATE_COUNT_3945;
-		     i++, mask <<= 1) {
-			if (rate_mask & mask) {
-				high = i;
-				break;
-			}
-		}
-
-		return (high << 8) | low;
-	}
-
-	low = index;
-	while (low != IWL_RATE_INVALID) {
-		if (rs_sta->tgg)
-			low = iwl3945_rates[low].prev_rs_tgg;
-		else
-			low = iwl3945_rates[low].prev_rs;
-		if (low == IWL_RATE_INVALID)
-			break;
-		if (rate_mask & (1 << low))
-			break;
-		IWL_DEBUG_RATE(priv, "Skipping masked lower rate: %d\n", low);
-	}
-
-	high = index;
-	while (high != IWL_RATE_INVALID) {
-		if (rs_sta->tgg)
-			high = iwl3945_rates[high].next_rs_tgg;
-		else
-			high = iwl3945_rates[high].next_rs;
-		if (high == IWL_RATE_INVALID)
-			break;
-		if (rate_mask & (1 << high))
-			break;
-		IWL_DEBUG_RATE(priv, "Skipping masked higher rate: %d\n", high);
-	}
-
-	return (high << 8) | low;
-}
-
-/**
- * rs_get_rate - find the rate for the requested packet
- *
- * Returns the ieee80211_rate structure allocated by the driver.
- *
- * The rate control algorithm has no internal mapping between hw_mode's
- * rate ordering and the rate ordering used by the rate control algorithm.
- *
- * The rate control algorithm uses a single table of rates that goes across
- * the entire A/B/G spectrum vs. being limited to just one particular
- * hw_mode.
- *
- * As such, we can't convert the index obtained below into the hw_mode's
- * rate table and must reference the driver allocated rate table
- *
- */
-static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
-			void *priv_sta,	struct ieee80211_tx_rate_control *txrc)
-{
-	struct ieee80211_supported_band *sband = txrc->sband;
-	struct sk_buff *skb = txrc->skb;
-	u8 low = IWL_RATE_INVALID;
-	u8 high = IWL_RATE_INVALID;
-	u16 high_low;
-	int index;
-	struct iwl3945_rs_sta *rs_sta = priv_sta;
-	struct iwl3945_rate_scale_data *window = NULL;
-	int current_tpt = IWL_INVALID_VALUE;
-	int low_tpt = IWL_INVALID_VALUE;
-	int high_tpt = IWL_INVALID_VALUE;
-	u32 fail_count;
-	s8 scale_action = 0;
-	unsigned long flags;
-	u16 rate_mask = sta ? sta->supp_rates[sband->band] : 0;
-	s8 max_rate_idx = -1;
-	struct iwl_priv *priv __maybe_unused = (struct iwl_priv *)priv_r;
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-
-	IWL_DEBUG_RATE(priv, "enter\n");
-
-	/* Treat uninitialized rate scaling data same as non-existing. */
-	if (rs_sta && !rs_sta->priv) {
-		IWL_DEBUG_RATE(priv, "Rate scaling information not initialized yet.\n");
-		priv_sta = NULL;
-	}
-
-	if (rate_control_send_low(sta, priv_sta, txrc))
-		return;
-
-	rate_mask = sta->supp_rates[sband->band];
-
-	/* get user max rate if set */
-	max_rate_idx = txrc->max_rate_idx;
-	if ((sband->band == IEEE80211_BAND_5GHZ) && (max_rate_idx != -1))
-		max_rate_idx += IWL_FIRST_OFDM_RATE;
-	if ((max_rate_idx < 0) || (max_rate_idx >= IWL_RATE_COUNT))
-		max_rate_idx = -1;
-
-	index = min(rs_sta->last_txrate_idx & 0xffff, IWL_RATE_COUNT_3945 - 1);
-
-	if (sband->band == IEEE80211_BAND_5GHZ)
-		rate_mask = rate_mask << IWL_FIRST_OFDM_RATE;
-
-	spin_lock_irqsave(&rs_sta->lock, flags);
-
-	/* for recent assoc, choose best rate regarding
-	 * to rssi value
-	 */
-	if (rs_sta->start_rate != IWL_RATE_INVALID) {
-		if (rs_sta->start_rate < index &&
-		   (rate_mask & (1 << rs_sta->start_rate)))
-			index = rs_sta->start_rate;
-		rs_sta->start_rate = IWL_RATE_INVALID;
-	}
-
-	/* force user max rate if set by user */
-	if ((max_rate_idx != -1) && (max_rate_idx < index)) {
-		if (rate_mask & (1 << max_rate_idx))
-			index = max_rate_idx;
-	}
-
-	window = &(rs_sta->win[index]);
-
-	fail_count = window->counter - window->success_counter;
-
-	if (((fail_count < IWL_RATE_MIN_FAILURE_TH) &&
-	     (window->success_counter < IWL_RATE_MIN_SUCCESS_TH))) {
-		spin_unlock_irqrestore(&rs_sta->lock, flags);
-
-		IWL_DEBUG_RATE(priv, "Invalid average_tpt on rate %d: "
-			       "counter: %d, success_counter: %d, "
-			       "expected_tpt is %sNULL\n",
-			       index,
-			       window->counter,
-			       window->success_counter,
-			       rs_sta->expected_tpt ? "not " : "");
-
-	   /* Can't calculate this yet; not enough history */
-		window->average_tpt = IWL_INVALID_VALUE;
-		goto out;
-
-	}
-
-	current_tpt = window->average_tpt;
-
-	high_low = iwl3945_get_adjacent_rate(rs_sta, index, rate_mask,
-					     sband->band);
-	low = high_low & 0xff;
-	high = (high_low >> 8) & 0xff;
-
-	/* If user set max rate, dont allow higher than user constrain */
-	if ((max_rate_idx != -1) && (max_rate_idx < high))
-		high = IWL_RATE_INVALID;
-
-	/* Collect Measured throughputs of adjacent rates */
-	if (low != IWL_RATE_INVALID)
-		low_tpt = rs_sta->win[low].average_tpt;
-
-	if (high != IWL_RATE_INVALID)
-		high_tpt = rs_sta->win[high].average_tpt;
-
-	spin_unlock_irqrestore(&rs_sta->lock, flags);
-
-	scale_action = 0;
-
-	/* Low success ratio , need to drop the rate */
-	if ((window->success_ratio < IWL_RATE_DECREASE_TH) || !current_tpt) {
-		IWL_DEBUG_RATE(priv, "decrease rate because of low success_ratio\n");
-		scale_action = -1;
-	/* No throughput measured yet for adjacent rates,
-	 * try increase */
-	} else if ((low_tpt == IWL_INVALID_VALUE) &&
-		   (high_tpt == IWL_INVALID_VALUE)) {
-
-		if (high != IWL_RATE_INVALID && window->success_ratio >= IWL_RATE_INCREASE_TH)
-			scale_action = 1;
-		else if (low != IWL_RATE_INVALID)
-			scale_action = 0;
-
-	/* Both adjacent throughputs are measured, but neither one has
-	 * better throughput; we're using the best rate, don't change
-	 * it! */
-	} else if ((low_tpt != IWL_INVALID_VALUE) &&
-		 (high_tpt != IWL_INVALID_VALUE) &&
-		 (low_tpt < current_tpt) && (high_tpt < current_tpt)) {
-
-		IWL_DEBUG_RATE(priv, "No action -- low [%d] & high [%d] < "
-			       "current_tpt [%d]\n",
-			       low_tpt, high_tpt, current_tpt);
-		scale_action = 0;
-
-	/* At least one of the rates has better throughput */
-	} else {
-		if (high_tpt != IWL_INVALID_VALUE) {
-
-			/* High rate has better throughput, Increase
-			 * rate */
-			if (high_tpt > current_tpt &&
-				window->success_ratio >= IWL_RATE_INCREASE_TH)
-				scale_action = 1;
-			else {
-				IWL_DEBUG_RATE(priv,
-				    "decrease rate because of high tpt\n");
-				scale_action = 0;
-			}
-		} else if (low_tpt != IWL_INVALID_VALUE) {
-			if (low_tpt > current_tpt) {
-				IWL_DEBUG_RATE(priv,
-				    "decrease rate because of low tpt\n");
-				scale_action = -1;
-			} else if (window->success_ratio >= IWL_RATE_INCREASE_TH) {
-				/* Lower rate has better
-				 * throughput,decrease rate */
-				scale_action = 1;
-			}
-		}
-	}
-
-	/* Sanity check; asked for decrease, but success rate or throughput
-	 * has been good at old rate.  Don't change it. */
-	if ((scale_action == -1) && (low != IWL_RATE_INVALID) &&
-		    ((window->success_ratio > IWL_RATE_HIGH_TH) ||
-		     (current_tpt > (100 * rs_sta->expected_tpt[low]))))
-		scale_action = 0;
-
-	switch (scale_action) {
-	case -1:
-
-		/* Decrese rate */
-		if (low != IWL_RATE_INVALID)
-			index = low;
-		break;
-
-	case 1:
-		/* Increase rate */
-		if (high != IWL_RATE_INVALID)
-			index = high;
-
-		break;
-
-	case 0:
-	default:
-		/* No change */
-		break;
-	}
-
-	IWL_DEBUG_RATE(priv, "Selected %d (action %d) - low %d high %d\n",
-		       index, scale_action, low, high);
-
- out:
-
-	rs_sta->last_txrate_idx = index;
-	if (sband->band == IEEE80211_BAND_5GHZ)
-		info->control.rates[0].idx = rs_sta->last_txrate_idx -
-				IWL_FIRST_OFDM_RATE;
-	else
-		info->control.rates[0].idx = rs_sta->last_txrate_idx;
-
-	IWL_DEBUG_RATE(priv, "leave: %d\n", index);
-}
-
-#ifdef CONFIG_MAC80211_DEBUGFS
-static int iwl3945_open_file_generic(struct inode *inode, struct file *file)
-{
-	file->private_data = inode->i_private;
-	return 0;
-}
-
-static ssize_t iwl3945_sta_dbgfs_stats_table_read(struct file *file,
-						  char __user *user_buf,
-						  size_t count, loff_t *ppos)
-{
-	char *buff;
-	int desc = 0;
-	int j;
-	ssize_t ret;
-	struct iwl3945_rs_sta *lq_sta = file->private_data;
-
-	buff = kmalloc(1024, GFP_KERNEL);
-	if (!buff)
-		return -ENOMEM;
-
-	desc += sprintf(buff + desc, "tx packets=%d last rate index=%d\n"
-			"rate=0x%X flush time %d\n",
-			lq_sta->tx_packets,
-			lq_sta->last_txrate_idx,
-			lq_sta->start_rate, jiffies_to_msecs(lq_sta->flush_time));
-	for (j = 0; j < IWL_RATE_COUNT_3945; j++) {
-		desc += sprintf(buff+desc,
-				"counter=%d success=%d %%=%d\n",
-				lq_sta->win[j].counter,
-				lq_sta->win[j].success_counter,
-				lq_sta->win[j].success_ratio);
-	}
-	ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
-	kfree(buff);
-	return ret;
-}
-
-static const struct file_operations rs_sta_dbgfs_stats_table_ops = {
-	.read = iwl3945_sta_dbgfs_stats_table_read,
-	.open = iwl3945_open_file_generic,
-	.llseek = default_llseek,
-};
-
-static void iwl3945_add_debugfs(void *priv, void *priv_sta,
-				struct dentry *dir)
-{
-	struct iwl3945_rs_sta *lq_sta = priv_sta;
-
-	lq_sta->rs_sta_dbgfs_stats_table_file =
-		debugfs_create_file("rate_stats_table", 0600, dir,
-		lq_sta, &rs_sta_dbgfs_stats_table_ops);
-
-}
-
-static void iwl3945_remove_debugfs(void *priv, void *priv_sta)
-{
-	struct iwl3945_rs_sta *lq_sta = priv_sta;
-	debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file);
-}
-#endif
-
-/*
- * Initialization of rate scaling information is done by driver after
- * the station is added. Since mac80211 calls this function before a
- * station is added we ignore it.
- */
-static void rs_rate_init_stub(void *priv_r, struct ieee80211_supported_band *sband,
-			      struct ieee80211_sta *sta, void *priv_sta)
-{
-}
-
-static struct rate_control_ops rs_ops = {
-	.module = NULL,
-	.name = RS_NAME,
-	.tx_status = rs_tx_status,
-	.get_rate = rs_get_rate,
-	.rate_init = rs_rate_init_stub,
-	.alloc = rs_alloc,
-	.free = rs_free,
-	.alloc_sta = rs_alloc_sta,
-	.free_sta = rs_free_sta,
-#ifdef CONFIG_MAC80211_DEBUGFS
-	.add_sta_debugfs = iwl3945_add_debugfs,
-	.remove_sta_debugfs = iwl3945_remove_debugfs,
-#endif
-
-};
-void iwl3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id)
-{
-	struct iwl_priv *priv = hw->priv;
-	s32 rssi = 0;
-	unsigned long flags;
-	struct iwl3945_rs_sta *rs_sta;
-	struct ieee80211_sta *sta;
-	struct iwl3945_sta_priv *psta;
-
-	IWL_DEBUG_RATE(priv, "enter\n");
-
-	rcu_read_lock();
-
-	sta = ieee80211_find_sta(priv->contexts[IWL_RXON_CTX_BSS].vif,
-				 priv->stations[sta_id].sta.sta.addr);
-	if (!sta) {
-		IWL_DEBUG_RATE(priv, "Unable to find station to initialize rate scaling.\n");
-		rcu_read_unlock();
-		return;
-	}
-
-	psta = (void *) sta->drv_priv;
-	rs_sta = &psta->rs_sta;
-
-	spin_lock_irqsave(&rs_sta->lock, flags);
-
-	rs_sta->tgg = 0;
-	switch (priv->band) {
-	case IEEE80211_BAND_2GHZ:
-		/* TODO: this always does G, not a regression */
-		if (priv->contexts[IWL_RXON_CTX_BSS].active.flags &
-						RXON_FLG_TGG_PROTECT_MSK) {
-			rs_sta->tgg = 1;
-			rs_sta->expected_tpt = iwl3945_expected_tpt_g_prot;
-		} else
-			rs_sta->expected_tpt = iwl3945_expected_tpt_g;
-		break;
-
-	case IEEE80211_BAND_5GHZ:
-		rs_sta->expected_tpt = iwl3945_expected_tpt_a;
-		break;
-	case IEEE80211_NUM_BANDS:
-		BUG();
-		break;
-	}
-
-	spin_unlock_irqrestore(&rs_sta->lock, flags);
-
-	rssi = priv->_3945.last_rx_rssi;
-	if (rssi == 0)
-		rssi = IWL_MIN_RSSI_VAL;
-
-	IWL_DEBUG_RATE(priv, "Network RSSI: %d\n", rssi);
-
-	rs_sta->start_rate = iwl3945_get_rate_index_by_rssi(rssi, priv->band);
-
-	IWL_DEBUG_RATE(priv, "leave: rssi %d assign rate index: "
-		       "%d (plcp 0x%x)\n", rssi, rs_sta->start_rate,
-		       iwl3945_rates[rs_sta->start_rate].plcp);
-	rcu_read_unlock();
-}
-
-int iwl3945_rate_control_register(void)
-{
-	return ieee80211_rate_control_register(&rs_ops);
-}
-
-void iwl3945_rate_control_unregister(void)
-{
-	ieee80211_rate_control_unregister(&rs_ops);
-}
-
-
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
deleted file mode 100644
index f4cd9370e7f..00000000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ /dev/null
@@ -1,2751 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-#include <linux/firmware.h>
-#include <linux/etherdevice.h>
-#include <asm/unaligned.h>
-#include <net/mac80211.h>
-
-#include "iwl-fh.h"
-#include "iwl-3945-fh.h"
-#include "iwl-commands.h"
-#include "iwl-sta.h"
-#include "iwl-3945.h"
-#include "iwl-eeprom.h"
-#include "iwl-core.h"
-#include "iwl-helpers.h"
-#include "iwl-led.h"
-#include "iwl-3945-led.h"
-#include "iwl-3945-debugfs.h"
-#include "iwl-legacy.h"
-
-#define IWL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np)    \
-	[IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP,   \
-				    IWL_RATE_##r##M_IEEE,   \
-				    IWL_RATE_##ip##M_INDEX, \
-				    IWL_RATE_##in##M_INDEX, \
-				    IWL_RATE_##rp##M_INDEX, \
-				    IWL_RATE_##rn##M_INDEX, \
-				    IWL_RATE_##pp##M_INDEX, \
-				    IWL_RATE_##np##M_INDEX, \
-				    IWL_RATE_##r##M_INDEX_TABLE, \
-				    IWL_RATE_##ip##M_INDEX_TABLE }
-
-/*
- * Parameter order:
- *   rate, prev rate, next rate, prev tgg rate, next tgg rate
- *
- * If there isn't a valid next or previous rate then INV is used which
- * maps to IWL_RATE_INVALID
- *
- */
-const struct iwl3945_rate_info iwl3945_rates[IWL_RATE_COUNT_3945] = {
-	IWL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2),    /*  1mbps */
-	IWL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5),          /*  2mbps */
-	IWL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11),        /*5.5mbps */
-	IWL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18),      /* 11mbps */
-	IWL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11),        /*  6mbps */
-	IWL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11),       /*  9mbps */
-	IWL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18),   /* 12mbps */
-	IWL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24),   /* 18mbps */
-	IWL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36),   /* 24mbps */
-	IWL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48),   /* 36mbps */
-	IWL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54),   /* 48mbps */
-	IWL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV),/* 54mbps */
-};
-
-static inline u8 iwl3945_get_prev_ieee_rate(u8 rate_index)
-{
-	u8 rate = iwl3945_rates[rate_index].prev_ieee;
-
-	if (rate == IWL_RATE_INVALID)
-		rate = rate_index;
-	return rate;
-}
-
-/* 1 = enable the iwl3945_disable_events() function */
-#define IWL_EVT_DISABLE (0)
-#define IWL_EVT_DISABLE_SIZE (1532/32)
-
-/**
- * iwl3945_disable_events - Disable selected events in uCode event log
- *
- * Disable an event by writing "1"s into "disable"
- *   bitmap in SRAM.  Bit position corresponds to Event # (id/type).
- *   Default values of 0 enable uCode events to be logged.
- * Use for only special debugging.  This function is just a placeholder as-is,
- *   you'll need to provide the special bits! ...
- *   ... and set IWL_EVT_DISABLE to 1. */
-void iwl3945_disable_events(struct iwl_priv *priv)
-{
-	int i;
-	u32 base;		/* SRAM address of event log header */
-	u32 disable_ptr;	/* SRAM address of event-disable bitmap array */
-	u32 array_size;		/* # of u32 entries in array */
-	static const u32 evt_disable[IWL_EVT_DISABLE_SIZE] = {
-		0x00000000,	/*   31 -    0  Event id numbers */
-		0x00000000,	/*   63 -   32 */
-		0x00000000,	/*   95 -   64 */
-		0x00000000,	/*  127 -   96 */
-		0x00000000,	/*  159 -  128 */
-		0x00000000,	/*  191 -  160 */
-		0x00000000,	/*  223 -  192 */
-		0x00000000,	/*  255 -  224 */
-		0x00000000,	/*  287 -  256 */
-		0x00000000,	/*  319 -  288 */
-		0x00000000,	/*  351 -  320 */
-		0x00000000,	/*  383 -  352 */
-		0x00000000,	/*  415 -  384 */
-		0x00000000,	/*  447 -  416 */
-		0x00000000,	/*  479 -  448 */
-		0x00000000,	/*  511 -  480 */
-		0x00000000,	/*  543 -  512 */
-		0x00000000,	/*  575 -  544 */
-		0x00000000,	/*  607 -  576 */
-		0x00000000,	/*  639 -  608 */
-		0x00000000,	/*  671 -  640 */
-		0x00000000,	/*  703 -  672 */
-		0x00000000,	/*  735 -  704 */
-		0x00000000,	/*  767 -  736 */
-		0x00000000,	/*  799 -  768 */
-		0x00000000,	/*  831 -  800 */
-		0x00000000,	/*  863 -  832 */
-		0x00000000,	/*  895 -  864 */
-		0x00000000,	/*  927 -  896 */
-		0x00000000,	/*  959 -  928 */
-		0x00000000,	/*  991 -  960 */
-		0x00000000,	/* 1023 -  992 */
-		0x00000000,	/* 1055 - 1024 */
-		0x00000000,	/* 1087 - 1056 */
-		0x00000000,	/* 1119 - 1088 */
-		0x00000000,	/* 1151 - 1120 */
-		0x00000000,	/* 1183 - 1152 */
-		0x00000000,	/* 1215 - 1184 */
-		0x00000000,	/* 1247 - 1216 */
-		0x00000000,	/* 1279 - 1248 */
-		0x00000000,	/* 1311 - 1280 */
-		0x00000000,	/* 1343 - 1312 */
-		0x00000000,	/* 1375 - 1344 */
-		0x00000000,	/* 1407 - 1376 */
-		0x00000000,	/* 1439 - 1408 */
-		0x00000000,	/* 1471 - 1440 */
-		0x00000000,	/* 1503 - 1472 */
-	};
-
-	base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
-	if (!iwl3945_hw_valid_rtc_data_addr(base)) {
-		IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
-		return;
-	}
-
-	disable_ptr = iwl_read_targ_mem(priv, base + (4 * sizeof(u32)));
-	array_size = iwl_read_targ_mem(priv, base + (5 * sizeof(u32)));
-
-	if (IWL_EVT_DISABLE && (array_size == IWL_EVT_DISABLE_SIZE)) {
-		IWL_DEBUG_INFO(priv, "Disabling selected uCode log events at 0x%x\n",
-			       disable_ptr);
-		for (i = 0; i < IWL_EVT_DISABLE_SIZE; i++)
-			iwl_write_targ_mem(priv,
-					   disable_ptr + (i * sizeof(u32)),
-					   evt_disable[i]);
-
-	} else {
-		IWL_DEBUG_INFO(priv, "Selected uCode log events may be disabled\n");
-		IWL_DEBUG_INFO(priv, "  by writing \"1\"s into disable bitmap\n");
-		IWL_DEBUG_INFO(priv, "  in SRAM at 0x%x, size %d u32s\n",
-			       disable_ptr, array_size);
-	}
-
-}
-
-static int iwl3945_hwrate_to_plcp_idx(u8 plcp)
-{
-	int idx;
-
-	for (idx = 0; idx < IWL_RATE_COUNT_3945; idx++)
-		if (iwl3945_rates[idx].plcp == plcp)
-			return idx;
-	return -1;
-}
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-#define TX_STATUS_ENTRY(x) case TX_3945_STATUS_FAIL_ ## x: return #x
-
-static const char *iwl3945_get_tx_fail_reason(u32 status)
-{
-	switch (status & TX_STATUS_MSK) {
-	case TX_3945_STATUS_SUCCESS:
-		return "SUCCESS";
-		TX_STATUS_ENTRY(SHORT_LIMIT);
-		TX_STATUS_ENTRY(LONG_LIMIT);
-		TX_STATUS_ENTRY(FIFO_UNDERRUN);
-		TX_STATUS_ENTRY(MGMNT_ABORT);
-		TX_STATUS_ENTRY(NEXT_FRAG);
-		TX_STATUS_ENTRY(LIFE_EXPIRE);
-		TX_STATUS_ENTRY(DEST_PS);
-		TX_STATUS_ENTRY(ABORTED);
-		TX_STATUS_ENTRY(BT_RETRY);
-		TX_STATUS_ENTRY(STA_INVALID);
-		TX_STATUS_ENTRY(FRAG_DROPPED);
-		TX_STATUS_ENTRY(TID_DISABLE);
-		TX_STATUS_ENTRY(FRAME_FLUSHED);
-		TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL);
-		TX_STATUS_ENTRY(TX_LOCKED);
-		TX_STATUS_ENTRY(NO_BEACON_ON_RADAR);
-	}
-
-	return "UNKNOWN";
-}
-#else
-static inline const char *iwl3945_get_tx_fail_reason(u32 status)
-{
-	return "";
-}
-#endif
-
-/*
- * get ieee prev rate from rate scale table.
- * for A and B mode we need to overright prev
- * value
- */
-int iwl3945_rs_next_rate(struct iwl_priv *priv, int rate)
-{
-	int next_rate = iwl3945_get_prev_ieee_rate(rate);
-
-	switch (priv->band) {
-	case IEEE80211_BAND_5GHZ:
-		if (rate == IWL_RATE_12M_INDEX)
-			next_rate = IWL_RATE_9M_INDEX;
-		else if (rate == IWL_RATE_6M_INDEX)
-			next_rate = IWL_RATE_6M_INDEX;
-		break;
-	case IEEE80211_BAND_2GHZ:
-		if (!(priv->_3945.sta_supp_rates & IWL_OFDM_RATES_MASK) &&
-		    iwl_is_associated(priv, IWL_RXON_CTX_BSS)) {
-			if (rate == IWL_RATE_11M_INDEX)
-				next_rate = IWL_RATE_5M_INDEX;
-		}
-		break;
-
-	default:
-		break;
-	}
-
-	return next_rate;
-}
-
-
-/**
- * iwl3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd
- *
- * When FW advances 'R' index, all entries between old and new 'R' index
- * need to be reclaimed. As result, some free space forms. If there is
- * enough free space (> low mark), wake the stack that feeds us.
- */
-static void iwl3945_tx_queue_reclaim(struct iwl_priv *priv,
-				     int txq_id, int index)
-{
-	struct iwl_tx_queue *txq = &priv->txq[txq_id];
-	struct iwl_queue *q = &txq->q;
-	struct iwl_tx_info *tx_info;
-
-	BUG_ON(txq_id == IWL39_CMD_QUEUE_NUM);
-
-	for (index = iwl_queue_inc_wrap(index, q->n_bd); q->read_ptr != index;
-		q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
-
-		tx_info = &txq->txb[txq->q.read_ptr];
-		ieee80211_tx_status_irqsafe(priv->hw, tx_info->skb);
-		tx_info->skb = NULL;
-		priv->cfg->ops->lib->txq_free_tfd(priv, txq);
-	}
-
-	if (iwl_queue_space(q) > q->low_mark && (txq_id >= 0) &&
-			(txq_id != IWL39_CMD_QUEUE_NUM) &&
-			priv->mac80211_registered)
-		iwl_wake_queue(priv, txq);
-}
-
-/**
- * iwl3945_rx_reply_tx - Handle Tx response
- */
-static void iwl3945_rx_reply_tx(struct iwl_priv *priv,
-				struct iwl_rx_mem_buffer *rxb)
-{
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-	u16 sequence = le16_to_cpu(pkt->hdr.sequence);
-	int txq_id = SEQ_TO_QUEUE(sequence);
-	int index = SEQ_TO_INDEX(sequence);
-	struct iwl_tx_queue *txq = &priv->txq[txq_id];
-	struct ieee80211_tx_info *info;
-	struct iwl3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
-	u32  status = le32_to_cpu(tx_resp->status);
-	int rate_idx;
-	int fail;
-
-	if ((index >= txq->q.n_bd) || (iwl_queue_used(&txq->q, index) == 0)) {
-		IWL_ERR(priv, "Read index for DMA queue txq_id (%d) index %d "
-			  "is out of range [0-%d] %d %d\n", txq_id,
-			  index, txq->q.n_bd, txq->q.write_ptr,
-			  txq->q.read_ptr);
-		return;
-	}
-
-	txq->time_stamp = jiffies;
-	info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb);
-	ieee80211_tx_info_clear_status(info);
-
-	/* Fill the MRR chain with some info about on-chip retransmissions */
-	rate_idx = iwl3945_hwrate_to_plcp_idx(tx_resp->rate);
-	if (info->band == IEEE80211_BAND_5GHZ)
-		rate_idx -= IWL_FIRST_OFDM_RATE;
-
-	fail = tx_resp->failure_frame;
-
-	info->status.rates[0].idx = rate_idx;
-	info->status.rates[0].count = fail + 1; /* add final attempt */
-
-	/* tx_status->rts_retry_count = tx_resp->failure_rts; */
-	info->flags |= ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ?
-				IEEE80211_TX_STAT_ACK : 0;
-
-	IWL_DEBUG_TX(priv, "Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n",
-			txq_id, iwl3945_get_tx_fail_reason(status), status,
-			tx_resp->rate, tx_resp->failure_frame);
-
-	IWL_DEBUG_TX_REPLY(priv, "Tx queue reclaim %d\n", index);
-	iwl3945_tx_queue_reclaim(priv, txq_id, index);
-
-	if (status & TX_ABORT_REQUIRED_MSK)
-		IWL_ERR(priv, "TODO:  Implement Tx ABORT REQUIRED!!!\n");
-}
-
-
-
-/*****************************************************************************
- *
- * Intel PRO/Wireless 3945ABG/BG Network Connection
- *
- *  RX handler implementations
- *
- *****************************************************************************/
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-/*
- *  based on the assumption of all statistics counter are in DWORD
- *  FIXME: This function is for debugging, do not deal with
- *  the case of counters roll-over.
- */
-static void iwl3945_accumulative_statistics(struct iwl_priv *priv,
-					    __le32 *stats)
-{
-	int i;
-	__le32 *prev_stats;
-	u32 *accum_stats;
-	u32 *delta, *max_delta;
-
-	prev_stats = (__le32 *)&priv->_3945.statistics;
-	accum_stats = (u32 *)&priv->_3945.accum_statistics;
-	delta = (u32 *)&priv->_3945.delta_statistics;
-	max_delta = (u32 *)&priv->_3945.max_delta;
-
-	for (i = sizeof(__le32); i < sizeof(struct iwl3945_notif_statistics);
-	     i += sizeof(__le32), stats++, prev_stats++, delta++,
-	     max_delta++, accum_stats++) {
-		if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) {
-			*delta = (le32_to_cpu(*stats) -
-				le32_to_cpu(*prev_stats));
-			*accum_stats += *delta;
-			if (*delta > *max_delta)
-				*max_delta = *delta;
-		}
-	}
-
-	/* reset accumulative statistics for "no-counter" type statistics */
-	priv->_3945.accum_statistics.general.temperature =
-		priv->_3945.statistics.general.temperature;
-	priv->_3945.accum_statistics.general.ttl_timestamp =
-		priv->_3945.statistics.general.ttl_timestamp;
-}
-#endif
-
-void iwl3945_hw_rx_statistics(struct iwl_priv *priv,
-		struct iwl_rx_mem_buffer *rxb)
-{
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-
-	IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n",
-		     (int)sizeof(struct iwl3945_notif_statistics),
-		     le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-	iwl3945_accumulative_statistics(priv, (__le32 *)&pkt->u.raw);
-#endif
-	iwl_recover_from_statistics(priv, pkt);
-
-	memcpy(&priv->_3945.statistics, pkt->u.raw, sizeof(priv->_3945.statistics));
-}
-
-void iwl3945_reply_statistics(struct iwl_priv *priv,
-			      struct iwl_rx_mem_buffer *rxb)
-{
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-	__le32 *flag = (__le32 *)&pkt->u.raw;
-
-	if (le32_to_cpu(*flag) & UCODE_STATISTICS_CLEAR_MSK) {
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-		memset(&priv->_3945.accum_statistics, 0,
-			sizeof(struct iwl3945_notif_statistics));
-		memset(&priv->_3945.delta_statistics, 0,
-			sizeof(struct iwl3945_notif_statistics));
-		memset(&priv->_3945.max_delta, 0,
-			sizeof(struct iwl3945_notif_statistics));
-#endif
-		IWL_DEBUG_RX(priv, "Statistics have been cleared\n");
-	}
-	iwl3945_hw_rx_statistics(priv, rxb);
-}
-
-
-/******************************************************************************
- *
- * Misc. internal state and helper functions
- *
- ******************************************************************************/
-
-/* This is necessary only for a number of statistics, see the caller. */
-static int iwl3945_is_network_packet(struct iwl_priv *priv,
-		struct ieee80211_hdr *header)
-{
-	/* Filter incoming packets to determine if they are targeted toward
-	 * this network, discarding packets coming from ourselves */
-	switch (priv->iw_mode) {
-	case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source    | BSSID */
-		/* packets to our IBSS update information */
-		return !compare_ether_addr(header->addr3, priv->bssid);
-	case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */
-		/* packets to our IBSS update information */
-		return !compare_ether_addr(header->addr2, priv->bssid);
-	default:
-		return 1;
-	}
-}
-
-static void iwl3945_pass_packet_to_mac80211(struct iwl_priv *priv,
-				   struct iwl_rx_mem_buffer *rxb,
-				   struct ieee80211_rx_status *stats)
-{
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
-	struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
-	struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
-	u16 len = le16_to_cpu(rx_hdr->len);
-	struct sk_buff *skb;
-	__le16 fc = hdr->frame_control;
-
-	/* We received data from the HW, so stop the watchdog */
-	if (unlikely(len + IWL39_RX_FRAME_SIZE >
-		     PAGE_SIZE << priv->hw_params.rx_page_order)) {
-		IWL_DEBUG_DROP(priv, "Corruption detected!\n");
-		return;
-	}
-
-	/* We only process data packets if the interface is open */
-	if (unlikely(!priv->is_open)) {
-		IWL_DEBUG_DROP_LIMIT(priv,
-			"Dropping packet while interface is not open.\n");
-		return;
-	}
-
-	skb = dev_alloc_skb(128);
-	if (!skb) {
-		IWL_ERR(priv, "dev_alloc_skb failed\n");
-		return;
-	}
-
-	if (!iwl3945_mod_params.sw_crypto)
-		iwl_set_decrypted_flag(priv,
-				       (struct ieee80211_hdr *)rxb_addr(rxb),
-				       le32_to_cpu(rx_end->status), stats);
-
-	skb_add_rx_frag(skb, 0, rxb->page,
-			(void *)rx_hdr->payload - (void *)pkt, len);
-
-	iwl_update_stats(priv, false, fc, len);
-	memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
-
-	ieee80211_rx(priv->hw, skb);
-	priv->alloc_rxb_page--;
-	rxb->page = NULL;
-}
-
-#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
-
-static void iwl3945_rx_reply_rx(struct iwl_priv *priv,
-				struct iwl_rx_mem_buffer *rxb)
-{
-	struct ieee80211_hdr *header;
-	struct ieee80211_rx_status rx_status;
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-	struct iwl3945_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt);
-	struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
-	struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
-	u16 rx_stats_sig_avg __maybe_unused = le16_to_cpu(rx_stats->sig_avg);
-	u16 rx_stats_noise_diff __maybe_unused = le16_to_cpu(rx_stats->noise_diff);
-	u8 network_packet;
-
-	rx_status.flag = 0;
-	rx_status.mactime = le64_to_cpu(rx_end->timestamp);
-	rx_status.band = (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
-				IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
-	rx_status.freq =
-		ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr->channel),
-					       rx_status.band);
-
-	rx_status.rate_idx = iwl3945_hwrate_to_plcp_idx(rx_hdr->rate);
-	if (rx_status.band == IEEE80211_BAND_5GHZ)
-		rx_status.rate_idx -= IWL_FIRST_OFDM_RATE;
-
-	rx_status.antenna = (le16_to_cpu(rx_hdr->phy_flags) &
-					RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4;
-
-	/* set the preamble flag if appropriate */
-	if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
-		rx_status.flag |= RX_FLAG_SHORTPRE;
-
-	if ((unlikely(rx_stats->phy_count > 20))) {
-		IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n",
-				rx_stats->phy_count);
-		return;
-	}
-
-	if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR)
-	    || !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
-		IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n", rx_end->status);
-		return;
-	}
-
-
-
-	/* Convert 3945's rssi indicator to dBm */
-	rx_status.signal = rx_stats->rssi - IWL39_RSSI_OFFSET;
-
-	IWL_DEBUG_STATS(priv, "Rssi %d sig_avg %d noise_diff %d\n",
-			rx_status.signal, rx_stats_sig_avg,
-			rx_stats_noise_diff);
-
-	header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
-
-	network_packet = iwl3945_is_network_packet(priv, header);
-
-	IWL_DEBUG_STATS_LIMIT(priv, "[%c] %d RSSI:%d Signal:%u, Rate:%u\n",
-			      network_packet ? '*' : ' ',
-			      le16_to_cpu(rx_hdr->channel),
-			      rx_status.signal, rx_status.signal,
-			      rx_status.rate_idx);
-
-	iwl_dbg_log_rx_data_frame(priv, le16_to_cpu(rx_hdr->len), header);
-
-	if (network_packet) {
-		priv->_3945.last_beacon_time =
-			le32_to_cpu(rx_end->beacon_timestamp);
-		priv->_3945.last_tsf = le64_to_cpu(rx_end->timestamp);
-		priv->_3945.last_rx_rssi = rx_status.signal;
-	}
-
-	iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status);
-}
-
-int iwl3945_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv,
-				     struct iwl_tx_queue *txq,
-				     dma_addr_t addr, u16 len, u8 reset, u8 pad)
-{
-	int count;
-	struct iwl_queue *q;
-	struct iwl3945_tfd *tfd, *tfd_tmp;
-
-	q = &txq->q;
-	tfd_tmp = (struct iwl3945_tfd *)txq->tfds;
-	tfd = &tfd_tmp[q->write_ptr];
-
-	if (reset)
-		memset(tfd, 0, sizeof(*tfd));
-
-	count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
-
-	if ((count >= NUM_TFD_CHUNKS) || (count < 0)) {
-		IWL_ERR(priv, "Error can not send more than %d chunks\n",
-			  NUM_TFD_CHUNKS);
-		return -EINVAL;
-	}
-
-	tfd->tbs[count].addr = cpu_to_le32(addr);
-	tfd->tbs[count].len = cpu_to_le32(len);
-
-	count++;
-
-	tfd->control_flags = cpu_to_le32(TFD_CTL_COUNT_SET(count) |
-					 TFD_CTL_PAD_SET(pad));
-
-	return 0;
-}
-
-/**
- * iwl3945_hw_txq_free_tfd - Free one TFD, those at index [txq->q.read_ptr]
- *
- * Does NOT advance any indexes
- */
-void iwl3945_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq)
-{
-	struct iwl3945_tfd *tfd_tmp = (struct iwl3945_tfd *)txq->tfds;
-	int index = txq->q.read_ptr;
-	struct iwl3945_tfd *tfd = &tfd_tmp[index];
-	struct pci_dev *dev = priv->pci_dev;
-	int i;
-	int counter;
-
-	/* sanity check */
-	counter = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
-	if (counter > NUM_TFD_CHUNKS) {
-		IWL_ERR(priv, "Too many chunks: %i\n", counter);
-		/* @todo issue fatal error, it is quite serious situation */
-		return;
-	}
-
-	/* Unmap tx_cmd */
-	if (counter)
-		pci_unmap_single(dev,
-				dma_unmap_addr(&txq->meta[index], mapping),
-				dma_unmap_len(&txq->meta[index], len),
-				PCI_DMA_TODEVICE);
-
-	/* unmap chunks if any */
-
-	for (i = 1; i < counter; i++)
-		pci_unmap_single(dev, le32_to_cpu(tfd->tbs[i].addr),
-			 le32_to_cpu(tfd->tbs[i].len), PCI_DMA_TODEVICE);
-
-	/* free SKB */
-	if (txq->txb) {
-		struct sk_buff *skb;
-
-		skb = txq->txb[txq->q.read_ptr].skb;
-
-		/* can be called from irqs-disabled context */
-		if (skb) {
-			dev_kfree_skb_any(skb);
-			txq->txb[txq->q.read_ptr].skb = NULL;
-		}
-	}
-}
-
-/**
- * iwl3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD:
- *
-*/
-void iwl3945_hw_build_tx_cmd_rate(struct iwl_priv *priv,
-				  struct iwl_device_cmd *cmd,
-				  struct ieee80211_tx_info *info,
-				  struct ieee80211_hdr *hdr,
-				  int sta_id, int tx_id)
-{
-	u16 hw_value = ieee80211_get_tx_rate(priv->hw, info)->hw_value;
-	u16 rate_index = min(hw_value & 0xffff, IWL_RATE_COUNT_3945);
-	u16 rate_mask;
-	int rate;
-	u8 rts_retry_limit;
-	u8 data_retry_limit;
-	__le32 tx_flags;
-	__le16 fc = hdr->frame_control;
-	struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
-
-	rate = iwl3945_rates[rate_index].plcp;
-	tx_flags = tx_cmd->tx_flags;
-
-	/* We need to figure out how to get the sta->supp_rates while
-	 * in this running context */
-	rate_mask = IWL_RATES_MASK_3945;
-
-	/* Set retry limit on DATA packets and Probe Responses*/
-	if (ieee80211_is_probe_resp(fc))
-		data_retry_limit = 3;
-	else
-		data_retry_limit = IWL_DEFAULT_TX_RETRY;
-	tx_cmd->data_retry_limit = data_retry_limit;
-
-	if (tx_id >= IWL39_CMD_QUEUE_NUM)
-		rts_retry_limit = 3;
-	else
-		rts_retry_limit = 7;
-
-	if (data_retry_limit < rts_retry_limit)
-		rts_retry_limit = data_retry_limit;
-	tx_cmd->rts_retry_limit = rts_retry_limit;
-
-	tx_cmd->rate = rate;
-	tx_cmd->tx_flags = tx_flags;
-
-	/* OFDM */
-	tx_cmd->supp_rates[0] =
-	   ((rate_mask & IWL_OFDM_RATES_MASK) >> IWL_FIRST_OFDM_RATE) & 0xFF;
-
-	/* CCK */
-	tx_cmd->supp_rates[1] = (rate_mask & 0xF);
-
-	IWL_DEBUG_RATE(priv, "Tx sta id: %d, rate: %d (plcp), flags: 0x%4X "
-		       "cck/ofdm mask: 0x%x/0x%x\n", sta_id,
-		       tx_cmd->rate, le32_to_cpu(tx_cmd->tx_flags),
-		       tx_cmd->supp_rates[1], tx_cmd->supp_rates[0]);
-}
-
-static u8 iwl3945_sync_sta(struct iwl_priv *priv, int sta_id, u16 tx_rate)
-{
-	unsigned long flags_spin;
-	struct iwl_station_entry *station;
-
-	if (sta_id == IWL_INVALID_STATION)
-		return IWL_INVALID_STATION;
-
-	spin_lock_irqsave(&priv->sta_lock, flags_spin);
-	station = &priv->stations[sta_id];
-
-	station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK;
-	station->sta.rate_n_flags = cpu_to_le16(tx_rate);
-	station->sta.mode = STA_CONTROL_MODIFY_MSK;
-	iwl_send_add_sta(priv, &station->sta, CMD_ASYNC);
-	spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
-
-	IWL_DEBUG_RATE(priv, "SCALE sync station %d to rate %d\n",
-			sta_id, tx_rate);
-	return sta_id;
-}
-
-static void iwl3945_set_pwr_vmain(struct iwl_priv *priv)
-{
-/*
- * (for documentation purposes)
- * to set power to V_AUX, do
-
-		if (pci_pme_capable(priv->pci_dev, PCI_D3cold)) {
-			iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
-					APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
-					~APMG_PS_CTRL_MSK_PWR_SRC);
-
-			iwl_poll_bit(priv, CSR_GPIO_IN,
-				     CSR_GPIO_IN_VAL_VAUX_PWR_SRC,
-				     CSR_GPIO_IN_BIT_AUX_POWER, 5000);
-		}
- */
-
-	iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
-			APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
-			~APMG_PS_CTRL_MSK_PWR_SRC);
-
-	iwl_poll_bit(priv, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC,
-		     CSR_GPIO_IN_BIT_AUX_POWER, 5000);	/* uS */
-}
-
-static int iwl3945_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
-{
-	iwl_write_direct32(priv, FH39_RCSR_RBD_BASE(0), rxq->bd_dma);
-	iwl_write_direct32(priv, FH39_RCSR_RPTR_ADDR(0), rxq->rb_stts_dma);
-	iwl_write_direct32(priv, FH39_RCSR_WPTR(0), 0);
-	iwl_write_direct32(priv, FH39_RCSR_CONFIG(0),
-		FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE |
-		FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE |
-		FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN |
-		FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 |
-		(RX_QUEUE_SIZE_LOG << FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE) |
-		FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST |
-		(1 << FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH) |
-		FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH);
-
-	/* fake read to flush all prev I/O */
-	iwl_read_direct32(priv, FH39_RSSR_CTRL);
-
-	return 0;
-}
-
-static int iwl3945_tx_reset(struct iwl_priv *priv)
-{
-
-	/* bypass mode */
-	iwl_write_prph(priv, ALM_SCD_MODE_REG, 0x2);
-
-	/* RA 0 is active */
-	iwl_write_prph(priv, ALM_SCD_ARASTAT_REG, 0x01);
-
-	/* all 6 fifo are active */
-	iwl_write_prph(priv, ALM_SCD_TXFACT_REG, 0x3f);
-
-	iwl_write_prph(priv, ALM_SCD_SBYP_MODE_1_REG, 0x010000);
-	iwl_write_prph(priv, ALM_SCD_SBYP_MODE_2_REG, 0x030002);
-	iwl_write_prph(priv, ALM_SCD_TXF4MF_REG, 0x000004);
-	iwl_write_prph(priv, ALM_SCD_TXF5MF_REG, 0x000005);
-
-	iwl_write_direct32(priv, FH39_TSSR_CBB_BASE,
-			     priv->_3945.shared_phys);
-
-	iwl_write_direct32(priv, FH39_TSSR_MSG_CONFIG,
-		FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON |
-		FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON |
-		FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B |
-		FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON |
-		FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON |
-		FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH |
-		FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH);
-
-
-	return 0;
-}
-
-/**
- * iwl3945_txq_ctx_reset - Reset TX queue context
- *
- * Destroys all DMA structures and initialize them again
- */
-static int iwl3945_txq_ctx_reset(struct iwl_priv *priv)
-{
-	int rc;
-	int txq_id, slots_num;
-
-	iwl3945_hw_txq_ctx_free(priv);
-
-	/* allocate tx queue structure */
-	rc = iwl_alloc_txq_mem(priv);
-	if (rc)
-		return rc;
-
-	/* Tx CMD queue */
-	rc = iwl3945_tx_reset(priv);
-	if (rc)
-		goto error;
-
-	/* Tx queue(s) */
-	for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) {
-		slots_num = (txq_id == IWL39_CMD_QUEUE_NUM) ?
-				TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS;
-		rc = iwl_tx_queue_init(priv, &priv->txq[txq_id], slots_num,
-				       txq_id);
-		if (rc) {
-			IWL_ERR(priv, "Tx %d queue init failed\n", txq_id);
-			goto error;
-		}
-	}
-
-	return rc;
-
- error:
-	iwl3945_hw_txq_ctx_free(priv);
-	return rc;
-}
-
-
-/*
- * Start up 3945's basic functionality after it has been reset
- * (e.g. after platform boot, or shutdown via iwl_apm_stop())
- * NOTE:  This does not load uCode nor start the embedded processor
- */
-static int iwl3945_apm_init(struct iwl_priv *priv)
-{
-	int ret = iwl_apm_init(priv);
-
-	/* Clear APMG (NIC's internal power management) interrupts */
-	iwl_write_prph(priv, APMG_RTC_INT_MSK_REG, 0x0);
-	iwl_write_prph(priv, APMG_RTC_INT_STT_REG, 0xFFFFFFFF);
-
-	/* Reset radio chip */
-	iwl_set_bits_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ);
-	udelay(5);
-	iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ);
-
-	return ret;
-}
-
-static void iwl3945_nic_config(struct iwl_priv *priv)
-{
-	struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
-	unsigned long flags;
-	u8 rev_id = priv->pci_dev->revision;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	/* Determine HW type */
-	IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", rev_id);
-
-	if (rev_id & PCI_CFG_REV_ID_BIT_RTP)
-		IWL_DEBUG_INFO(priv, "RTP type\n");
-	else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) {
-		IWL_DEBUG_INFO(priv, "3945 RADIO-MB type\n");
-		iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
-			    CSR39_HW_IF_CONFIG_REG_BIT_3945_MB);
-	} else {
-		IWL_DEBUG_INFO(priv, "3945 RADIO-MM type\n");
-		iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
-			    CSR39_HW_IF_CONFIG_REG_BIT_3945_MM);
-	}
-
-	if (EEPROM_SKU_CAP_OP_MODE_MRC == eeprom->sku_cap) {
-		IWL_DEBUG_INFO(priv, "SKU OP mode is mrc\n");
-		iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
-			    CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC);
-	} else
-		IWL_DEBUG_INFO(priv, "SKU OP mode is basic\n");
-
-	if ((eeprom->board_revision & 0xF0) == 0xD0) {
-		IWL_DEBUG_INFO(priv, "3945ABG revision is 0x%X\n",
-			       eeprom->board_revision);
-		iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
-			    CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
-	} else {
-		IWL_DEBUG_INFO(priv, "3945ABG revision is 0x%X\n",
-			       eeprom->board_revision);
-		iwl_clear_bit(priv, CSR_HW_IF_CONFIG_REG,
-			      CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
-	}
-
-	if (eeprom->almgor_m_version <= 1) {
-		iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
-			    CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A);
-		IWL_DEBUG_INFO(priv, "Card M type A version is 0x%X\n",
-			       eeprom->almgor_m_version);
-	} else {
-		IWL_DEBUG_INFO(priv, "Card M type B version is 0x%X\n",
-			       eeprom->almgor_m_version);
-		iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
-			    CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B);
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	if (eeprom->sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE)
-		IWL_DEBUG_RF_KILL(priv, "SW RF KILL supported in EEPROM.\n");
-
-	if (eeprom->sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE)
-		IWL_DEBUG_RF_KILL(priv, "HW RF KILL supported in EEPROM.\n");
-}
-
-int iwl3945_hw_nic_init(struct iwl_priv *priv)
-{
-	int rc;
-	unsigned long flags;
-	struct iwl_rx_queue *rxq = &priv->rxq;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	priv->cfg->ops->lib->apm_ops.init(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	iwl3945_set_pwr_vmain(priv);
-
-	priv->cfg->ops->lib->apm_ops.config(priv);
-
-	/* Allocate the RX queue, or reset if it is already allocated */
-	if (!rxq->bd) {
-		rc = iwl_rx_queue_alloc(priv);
-		if (rc) {
-			IWL_ERR(priv, "Unable to initialize Rx queue\n");
-			return -ENOMEM;
-		}
-	} else
-		iwl3945_rx_queue_reset(priv, rxq);
-
-	iwl3945_rx_replenish(priv);
-
-	iwl3945_rx_init(priv, rxq);
-
-
-	/* Look at using this instead:
-	rxq->need_update = 1;
-	iwl_rx_queue_update_write_ptr(priv, rxq);
-	*/
-
-	iwl_write_direct32(priv, FH39_RCSR_WPTR(0), rxq->write & ~7);
-
-	rc = iwl3945_txq_ctx_reset(priv);
-	if (rc)
-		return rc;
-
-	set_bit(STATUS_INIT, &priv->status);
-
-	return 0;
-}
-
-/**
- * iwl3945_hw_txq_ctx_free - Free TXQ Context
- *
- * Destroy all TX DMA queues and structures
- */
-void iwl3945_hw_txq_ctx_free(struct iwl_priv *priv)
-{
-	int txq_id;
-
-	/* Tx queues */
-	if (priv->txq)
-		for (txq_id = 0; txq_id < priv->hw_params.max_txq_num;
-		     txq_id++)
-			if (txq_id == IWL39_CMD_QUEUE_NUM)
-				iwl_cmd_queue_free(priv);
-			else
-				iwl_tx_queue_free(priv, txq_id);
-
-	/* free tx queue structure */
-	iwl_free_txq_mem(priv);
-}
-
-void iwl3945_hw_txq_ctx_stop(struct iwl_priv *priv)
-{
-	int txq_id;
-
-	/* stop SCD */
-	iwl_write_prph(priv, ALM_SCD_MODE_REG, 0);
-	iwl_write_prph(priv, ALM_SCD_TXFACT_REG, 0);
-
-	/* reset TFD queues */
-	for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) {
-		iwl_write_direct32(priv, FH39_TCSR_CONFIG(txq_id), 0x0);
-		iwl_poll_direct_bit(priv, FH39_TSSR_TX_STATUS,
-				FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id),
-				1000);
-	}
-
-	iwl3945_hw_txq_ctx_free(priv);
-}
-
-/**
- * iwl3945_hw_reg_adjust_power_by_temp
- * return index delta into power gain settings table
-*/
-static int iwl3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading)
-{
-	return (new_reading - old_reading) * (-11) / 100;
-}
-
-/**
- * iwl3945_hw_reg_temp_out_of_range - Keep temperature in sane range
- */
-static inline int iwl3945_hw_reg_temp_out_of_range(int temperature)
-{
-	return ((temperature < -260) || (temperature > 25)) ? 1 : 0;
-}
-
-int iwl3945_hw_get_temperature(struct iwl_priv *priv)
-{
-	return iwl_read32(priv, CSR_UCODE_DRV_GP2);
-}
-
-/**
- * iwl3945_hw_reg_txpower_get_temperature
- * get the current temperature by reading from NIC
-*/
-static int iwl3945_hw_reg_txpower_get_temperature(struct iwl_priv *priv)
-{
-	struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
-	int temperature;
-
-	temperature = iwl3945_hw_get_temperature(priv);
-
-	/* driver's okay range is -260 to +25.
-	 *   human readable okay range is 0 to +285 */
-	IWL_DEBUG_INFO(priv, "Temperature: %d\n", temperature + IWL_TEMP_CONVERT);
-
-	/* handle insane temp reading */
-	if (iwl3945_hw_reg_temp_out_of_range(temperature)) {
-		IWL_ERR(priv, "Error bad temperature value  %d\n", temperature);
-
-		/* if really really hot(?),
-		 *   substitute the 3rd band/group's temp measured at factory */
-		if (priv->last_temperature > 100)
-			temperature = eeprom->groups[2].temperature;
-		else /* else use most recent "sane" value from driver */
-			temperature = priv->last_temperature;
-	}
-
-	return temperature;	/* raw, not "human readable" */
-}
-
-/* Adjust Txpower only if temperature variance is greater than threshold.
- *
- * Both are lower than older versions' 9 degrees */
-#define IWL_TEMPERATURE_LIMIT_TIMER   6
-
-/**
- * is_temp_calib_needed - determines if new calibration is needed
- *
- * records new temperature in tx_mgr->temperature.
- * replaces tx_mgr->last_temperature *only* if calib needed
- *    (assumes caller will actually do the calibration!). */
-static int is_temp_calib_needed(struct iwl_priv *priv)
-{
-	int temp_diff;
-
-	priv->temperature = iwl3945_hw_reg_txpower_get_temperature(priv);
-	temp_diff = priv->temperature - priv->last_temperature;
-
-	/* get absolute value */
-	if (temp_diff < 0) {
-		IWL_DEBUG_POWER(priv, "Getting cooler, delta %d,\n", temp_diff);
-		temp_diff = -temp_diff;
-	} else if (temp_diff == 0)
-		IWL_DEBUG_POWER(priv, "Same temp,\n");
-	else
-		IWL_DEBUG_POWER(priv, "Getting warmer, delta %d,\n", temp_diff);
-
-	/* if we don't need calibration, *don't* update last_temperature */
-	if (temp_diff < IWL_TEMPERATURE_LIMIT_TIMER) {
-		IWL_DEBUG_POWER(priv, "Timed thermal calib not needed\n");
-		return 0;
-	}
-
-	IWL_DEBUG_POWER(priv, "Timed thermal calib needed\n");
-
-	/* assume that caller will actually do calib ...
-	 *   update the "last temperature" value */
-	priv->last_temperature = priv->temperature;
-	return 1;
-}
-
-#define IWL_MAX_GAIN_ENTRIES 78
-#define IWL_CCK_FROM_OFDM_POWER_DIFF  -5
-#define IWL_CCK_FROM_OFDM_INDEX_DIFF (10)
-
-/* radio and DSP power table, each step is 1/2 dB.
- * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */
-static struct iwl3945_tx_power power_gain_table[2][IWL_MAX_GAIN_ENTRIES] = {
-	{
-	 {251, 127},		/* 2.4 GHz, highest power */
-	 {251, 127},
-	 {251, 127},
-	 {251, 127},
-	 {251, 125},
-	 {251, 110},
-	 {251, 105},
-	 {251, 98},
-	 {187, 125},
-	 {187, 115},
-	 {187, 108},
-	 {187, 99},
-	 {243, 119},
-	 {243, 111},
-	 {243, 105},
-	 {243, 97},
-	 {243, 92},
-	 {211, 106},
-	 {211, 100},
-	 {179, 120},
-	 {179, 113},
-	 {179, 107},
-	 {147, 125},
-	 {147, 119},
-	 {147, 112},
-	 {147, 106},
-	 {147, 101},
-	 {147, 97},
-	 {147, 91},
-	 {115, 107},
-	 {235, 121},
-	 {235, 115},
-	 {235, 109},
-	 {203, 127},
-	 {203, 121},
-	 {203, 115},
-	 {203, 108},
-	 {203, 102},
-	 {203, 96},
-	 {203, 92},
-	 {171, 110},
-	 {171, 104},
-	 {171, 98},
-	 {139, 116},
-	 {227, 125},
-	 {227, 119},
-	 {227, 113},
-	 {227, 107},
-	 {227, 101},
-	 {227, 96},
-	 {195, 113},
-	 {195, 106},
-	 {195, 102},
-	 {195, 95},
-	 {163, 113},
-	 {163, 106},
-	 {163, 102},
-	 {163, 95},
-	 {131, 113},
-	 {131, 106},
-	 {131, 102},
-	 {131, 95},
-	 {99, 113},
-	 {99, 106},
-	 {99, 102},
-	 {99, 95},
-	 {67, 113},
-	 {67, 106},
-	 {67, 102},
-	 {67, 95},
-	 {35, 113},
-	 {35, 106},
-	 {35, 102},
-	 {35, 95},
-	 {3, 113},
-	 {3, 106},
-	 {3, 102},
-	 {3, 95} },		/* 2.4 GHz, lowest power */
-	{
-	 {251, 127},		/* 5.x GHz, highest power */
-	 {251, 120},
-	 {251, 114},
-	 {219, 119},
-	 {219, 101},
-	 {187, 113},
-	 {187, 102},
-	 {155, 114},
-	 {155, 103},
-	 {123, 117},
-	 {123, 107},
-	 {123, 99},
-	 {123, 92},
-	 {91, 108},
-	 {59, 125},
-	 {59, 118},
-	 {59, 109},
-	 {59, 102},
-	 {59, 96},
-	 {59, 90},
-	 {27, 104},
-	 {27, 98},
-	 {27, 92},
-	 {115, 118},
-	 {115, 111},
-	 {115, 104},
-	 {83, 126},
-	 {83, 121},
-	 {83, 113},
-	 {83, 105},
-	 {83, 99},
-	 {51, 118},
-	 {51, 111},
-	 {51, 104},
-	 {51, 98},
-	 {19, 116},
-	 {19, 109},
-	 {19, 102},
-	 {19, 98},
-	 {19, 93},
-	 {171, 113},
-	 {171, 107},
-	 {171, 99},
-	 {139, 120},
-	 {139, 113},
-	 {139, 107},
-	 {139, 99},
-	 {107, 120},
-	 {107, 113},
-	 {107, 107},
-	 {107, 99},
-	 {75, 120},
-	 {75, 113},
-	 {75, 107},
-	 {75, 99},
-	 {43, 120},
-	 {43, 113},
-	 {43, 107},
-	 {43, 99},
-	 {11, 120},
-	 {11, 113},
-	 {11, 107},
-	 {11, 99},
-	 {131, 107},
-	 {131, 99},
-	 {99, 120},
-	 {99, 113},
-	 {99, 107},
-	 {99, 99},
-	 {67, 120},
-	 {67, 113},
-	 {67, 107},
-	 {67, 99},
-	 {35, 120},
-	 {35, 113},
-	 {35, 107},
-	 {35, 99},
-	 {3, 120} }		/* 5.x GHz, lowest power */
-};
-
-static inline u8 iwl3945_hw_reg_fix_power_index(int index)
-{
-	if (index < 0)
-		return 0;
-	if (index >= IWL_MAX_GAIN_ENTRIES)
-		return IWL_MAX_GAIN_ENTRIES - 1;
-	return (u8) index;
-}
-
-/* Kick off thermal recalibration check every 60 seconds */
-#define REG_RECALIB_PERIOD (60)
-
-/**
- * iwl3945_hw_reg_set_scan_power - Set Tx power for scan probe requests
- *
- * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK)
- * or 6 Mbit (OFDM) rates.
- */
-static void iwl3945_hw_reg_set_scan_power(struct iwl_priv *priv, u32 scan_tbl_index,
-			       s32 rate_index, const s8 *clip_pwrs,
-			       struct iwl_channel_info *ch_info,
-			       int band_index)
-{
-	struct iwl3945_scan_power_info *scan_power_info;
-	s8 power;
-	u8 power_index;
-
-	scan_power_info = &ch_info->scan_pwr_info[scan_tbl_index];
-
-	/* use this channel group's 6Mbit clipping/saturation pwr,
-	 *   but cap at regulatory scan power restriction (set during init
-	 *   based on eeprom channel data) for this channel.  */
-	power = min(ch_info->scan_power, clip_pwrs[IWL_RATE_6M_INDEX_TABLE]);
-
-	/* further limit to user's max power preference.
-	 * FIXME:  Other spectrum management power limitations do not
-	 *   seem to apply?? */
-	power = min(power, priv->tx_power_user_lmt);
-	scan_power_info->requested_power = power;
-
-	/* find difference between new scan *power* and current "normal"
-	 *   Tx *power* for 6Mb.  Use this difference (x2) to adjust the
-	 *   current "normal" temperature-compensated Tx power *index* for
-	 *   this rate (1Mb or 6Mb) to yield new temp-compensated scan power
-	 *   *index*. */
-	power_index = ch_info->power_info[rate_index].power_table_index
-	    - (power - ch_info->power_info
-	       [IWL_RATE_6M_INDEX_TABLE].requested_power) * 2;
-
-	/* store reference index that we use when adjusting *all* scan
-	 *   powers.  So we can accommodate user (all channel) or spectrum
-	 *   management (single channel) power changes "between" temperature
-	 *   feedback compensation procedures.
-	 * don't force fit this reference index into gain table; it may be a
-	 *   negative number.  This will help avoid errors when we're at
-	 *   the lower bounds (highest gains, for warmest temperatures)
-	 *   of the table. */
-
-	/* don't exceed table bounds for "real" setting */
-	power_index = iwl3945_hw_reg_fix_power_index(power_index);
-
-	scan_power_info->power_table_index = power_index;
-	scan_power_info->tpc.tx_gain =
-	    power_gain_table[band_index][power_index].tx_gain;
-	scan_power_info->tpc.dsp_atten =
-	    power_gain_table[band_index][power_index].dsp_atten;
-}
-
-/**
- * iwl3945_send_tx_power - fill in Tx Power command with gain settings
- *
- * Configures power settings for all rates for the current channel,
- * using values from channel info struct, and send to NIC
- */
-static int iwl3945_send_tx_power(struct iwl_priv *priv)
-{
-	int rate_idx, i;
-	const struct iwl_channel_info *ch_info = NULL;
-	struct iwl3945_txpowertable_cmd txpower = {
-		.channel = priv->contexts[IWL_RXON_CTX_BSS].active.channel,
-	};
-	u16 chan;
-
-	if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status),
-		      "TX Power requested while scanning!\n"))
-		return -EAGAIN;
-
-	chan = le16_to_cpu(priv->contexts[IWL_RXON_CTX_BSS].active.channel);
-
-	txpower.band = (priv->band == IEEE80211_BAND_5GHZ) ? 0 : 1;
-	ch_info = iwl_get_channel_info(priv, priv->band, chan);
-	if (!ch_info) {
-		IWL_ERR(priv,
-			"Failed to get channel info for channel %d [%d]\n",
-			chan, priv->band);
-		return -EINVAL;
-	}
-
-	if (!is_channel_valid(ch_info)) {
-		IWL_DEBUG_POWER(priv, "Not calling TX_PWR_TABLE_CMD on "
-				"non-Tx channel.\n");
-		return 0;
-	}
-
-	/* fill cmd with power settings for all rates for current channel */
-	/* Fill OFDM rate */
-	for (rate_idx = IWL_FIRST_OFDM_RATE, i = 0;
-	     rate_idx <= IWL39_LAST_OFDM_RATE; rate_idx++, i++) {
-
-		txpower.power[i].tpc = ch_info->power_info[i].tpc;
-		txpower.power[i].rate = iwl3945_rates[rate_idx].plcp;
-
-		IWL_DEBUG_POWER(priv, "ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
-				le16_to_cpu(txpower.channel),
-				txpower.band,
-				txpower.power[i].tpc.tx_gain,
-				txpower.power[i].tpc.dsp_atten,
-				txpower.power[i].rate);
-	}
-	/* Fill CCK rates */
-	for (rate_idx = IWL_FIRST_CCK_RATE;
-	     rate_idx <= IWL_LAST_CCK_RATE; rate_idx++, i++) {
-		txpower.power[i].tpc = ch_info->power_info[i].tpc;
-		txpower.power[i].rate = iwl3945_rates[rate_idx].plcp;
-
-		IWL_DEBUG_POWER(priv, "ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
-				le16_to_cpu(txpower.channel),
-				txpower.band,
-				txpower.power[i].tpc.tx_gain,
-				txpower.power[i].tpc.dsp_atten,
-				txpower.power[i].rate);
-	}
-
-	return iwl_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD,
-				sizeof(struct iwl3945_txpowertable_cmd),
-				&txpower);
-
-}
-
-/**
- * iwl3945_hw_reg_set_new_power - Configures power tables at new levels
- * @ch_info: Channel to update.  Uses power_info.requested_power.
- *
- * Replace requested_power and base_power_index ch_info fields for
- * one channel.
- *
- * Called if user or spectrum management changes power preferences.
- * Takes into account h/w and modulation limitations (clip power).
- *
- * This does *not* send anything to NIC, just sets up ch_info for one channel.
- *
- * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to
- *	 properly fill out the scan powers, and actual h/w gain settings,
- *	 and send changes to NIC
- */
-static int iwl3945_hw_reg_set_new_power(struct iwl_priv *priv,
-			     struct iwl_channel_info *ch_info)
-{
-	struct iwl3945_channel_power_info *power_info;
-	int power_changed = 0;
-	int i;
-	const s8 *clip_pwrs;
-	int power;
-
-	/* Get this chnlgrp's rate-to-max/clip-powers table */
-	clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers;
-
-	/* Get this channel's rate-to-current-power settings table */
-	power_info = ch_info->power_info;
-
-	/* update OFDM Txpower settings */
-	for (i = IWL_RATE_6M_INDEX_TABLE; i <= IWL_RATE_54M_INDEX_TABLE;
-	     i++, ++power_info) {
-		int delta_idx;
-
-		/* limit new power to be no more than h/w capability */
-		power = min(ch_info->curr_txpow, clip_pwrs[i]);
-		if (power == power_info->requested_power)
-			continue;
-
-		/* find difference between old and new requested powers,
-		 *    update base (non-temp-compensated) power index */
-		delta_idx = (power - power_info->requested_power) * 2;
-		power_info->base_power_index -= delta_idx;
-
-		/* save new requested power value */
-		power_info->requested_power = power;
-
-		power_changed = 1;
-	}
-
-	/* update CCK Txpower settings, based on OFDM 12M setting ...
-	 *    ... all CCK power settings for a given channel are the *same*. */
-	if (power_changed) {
-		power =
-		    ch_info->power_info[IWL_RATE_12M_INDEX_TABLE].
-		    requested_power + IWL_CCK_FROM_OFDM_POWER_DIFF;
-
-		/* do all CCK rates' iwl3945_channel_power_info structures */
-		for (i = IWL_RATE_1M_INDEX_TABLE; i <= IWL_RATE_11M_INDEX_TABLE; i++) {
-			power_info->requested_power = power;
-			power_info->base_power_index =
-			    ch_info->power_info[IWL_RATE_12M_INDEX_TABLE].
-			    base_power_index + IWL_CCK_FROM_OFDM_INDEX_DIFF;
-			++power_info;
-		}
-	}
-
-	return 0;
-}
-
-/**
- * iwl3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel
- *
- * NOTE: Returned power limit may be less (but not more) than requested,
- *	 based strictly on regulatory (eeprom and spectrum mgt) limitations
- *	 (no consideration for h/w clipping limitations).
- */
-static int iwl3945_hw_reg_get_ch_txpower_limit(struct iwl_channel_info *ch_info)
-{
-	s8 max_power;
-
-#if 0
-	/* if we're using TGd limits, use lower of TGd or EEPROM */
-	if (ch_info->tgd_data.max_power != 0)
-		max_power = min(ch_info->tgd_data.max_power,
-				ch_info->eeprom.max_power_avg);
-
-	/* else just use EEPROM limits */
-	else
-#endif
-		max_power = ch_info->eeprom.max_power_avg;
-
-	return min(max_power, ch_info->max_power_avg);
-}
-
-/**
- * iwl3945_hw_reg_comp_txpower_temp - Compensate for temperature
- *
- * Compensate txpower settings of *all* channels for temperature.
- * This only accounts for the difference between current temperature
- *   and the factory calibration temperatures, and bases the new settings
- *   on the channel's base_power_index.
- *
- * If RxOn is "associated", this sends the new Txpower to NIC!
- */
-static int iwl3945_hw_reg_comp_txpower_temp(struct iwl_priv *priv)
-{
-	struct iwl_channel_info *ch_info = NULL;
-	struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
-	int delta_index;
-	const s8 *clip_pwrs; /* array of h/w max power levels for each rate */
-	u8 a_band;
-	u8 rate_index;
-	u8 scan_tbl_index;
-	u8 i;
-	int ref_temp;
-	int temperature = priv->temperature;
-
-	if (priv->disable_tx_power_cal ||
-	    test_bit(STATUS_SCANNING, &priv->status)) {
-		/* do not perform tx power calibration */
-		return 0;
-	}
-	/* set up new Tx power info for each and every channel, 2.4 and 5.x */
-	for (i = 0; i < priv->channel_count; i++) {
-		ch_info = &priv->channel_info[i];
-		a_band = is_channel_a_band(ch_info);
-
-		/* Get this chnlgrp's factory calibration temperature */
-		ref_temp = (s16)eeprom->groups[ch_info->group_index].
-		    temperature;
-
-		/* get power index adjustment based on current and factory
-		 * temps */
-		delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature,
-							      ref_temp);
-
-		/* set tx power value for all rates, OFDM and CCK */
-		for (rate_index = 0; rate_index < IWL_RATE_COUNT_3945;
-		     rate_index++) {
-			int power_idx =
-			    ch_info->power_info[rate_index].base_power_index;
-
-			/* temperature compensate */
-			power_idx += delta_index;
-
-			/* stay within table range */
-			power_idx = iwl3945_hw_reg_fix_power_index(power_idx);
-			ch_info->power_info[rate_index].
-			    power_table_index = (u8) power_idx;
-			ch_info->power_info[rate_index].tpc =
-			    power_gain_table[a_band][power_idx];
-		}
-
-		/* Get this chnlgrp's rate-to-max/clip-powers table */
-		clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers;
-
-		/* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
-		for (scan_tbl_index = 0;
-		     scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) {
-			s32 actual_index = (scan_tbl_index == 0) ?
-			    IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE;
-			iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index,
-					   actual_index, clip_pwrs,
-					   ch_info, a_band);
-		}
-	}
-
-	/* send Txpower command for current channel to ucode */
-	return priv->cfg->ops->lib->send_tx_power(priv);
-}
-
-int iwl3945_hw_reg_set_txpower(struct iwl_priv *priv, s8 power)
-{
-	struct iwl_channel_info *ch_info;
-	s8 max_power;
-	u8 a_band;
-	u8 i;
-
-	if (priv->tx_power_user_lmt == power) {
-		IWL_DEBUG_POWER(priv, "Requested Tx power same as current "
-				"limit: %ddBm.\n", power);
-		return 0;
-	}
-
-	IWL_DEBUG_POWER(priv, "Setting upper limit clamp to %ddBm.\n", power);
-	priv->tx_power_user_lmt = power;
-
-	/* set up new Tx powers for each and every channel, 2.4 and 5.x */
-
-	for (i = 0; i < priv->channel_count; i++) {
-		ch_info = &priv->channel_info[i];
-		a_band = is_channel_a_band(ch_info);
-
-		/* find minimum power of all user and regulatory constraints
-		 *    (does not consider h/w clipping limitations) */
-		max_power = iwl3945_hw_reg_get_ch_txpower_limit(ch_info);
-		max_power = min(power, max_power);
-		if (max_power != ch_info->curr_txpow) {
-			ch_info->curr_txpow = max_power;
-
-			/* this considers the h/w clipping limitations */
-			iwl3945_hw_reg_set_new_power(priv, ch_info);
-		}
-	}
-
-	/* update txpower settings for all channels,
-	 *   send to NIC if associated. */
-	is_temp_calib_needed(priv);
-	iwl3945_hw_reg_comp_txpower_temp(priv);
-
-	return 0;
-}
-
-static int iwl3945_send_rxon_assoc(struct iwl_priv *priv,
-				   struct iwl_rxon_context *ctx)
-{
-	int rc = 0;
-	struct iwl_rx_packet *pkt;
-	struct iwl3945_rxon_assoc_cmd rxon_assoc;
-	struct iwl_host_cmd cmd = {
-		.id = REPLY_RXON_ASSOC,
-		.len = sizeof(rxon_assoc),
-		.flags = CMD_WANT_SKB,
-		.data = &rxon_assoc,
-	};
-	const struct iwl_rxon_cmd *rxon1 = &ctx->staging;
-	const struct iwl_rxon_cmd *rxon2 = &ctx->active;
-
-	if ((rxon1->flags == rxon2->flags) &&
-	    (rxon1->filter_flags == rxon2->filter_flags) &&
-	    (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
-	    (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
-		IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC.  Not resending.\n");
-		return 0;
-	}
-
-	rxon_assoc.flags = ctx->staging.flags;
-	rxon_assoc.filter_flags = ctx->staging.filter_flags;
-	rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates;
-	rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates;
-	rxon_assoc.reserved = 0;
-
-	rc = iwl_send_cmd_sync(priv, &cmd);
-	if (rc)
-		return rc;
-
-	pkt = (struct iwl_rx_packet *)cmd.reply_page;
-	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
-		IWL_ERR(priv, "Bad return from REPLY_RXON_ASSOC command\n");
-		rc = -EIO;
-	}
-
-	iwl_free_pages(priv, cmd.reply_page);
-
-	return rc;
-}
-
-/**
- * iwl3945_commit_rxon - commit staging_rxon to hardware
- *
- * The RXON command in staging_rxon is committed to the hardware and
- * the active_rxon structure is updated with the new data.  This
- * function correctly transitions out of the RXON_ASSOC_MSK state if
- * a HW tune is required based on the RXON structure changes.
- */
-int iwl3945_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
-{
-	/* cast away the const for active_rxon in this function */
-	struct iwl3945_rxon_cmd *active_rxon = (void *)&ctx->active;
-	struct iwl3945_rxon_cmd *staging_rxon = (void *)&ctx->staging;
-	int rc = 0;
-	bool new_assoc = !!(staging_rxon->filter_flags & RXON_FILTER_ASSOC_MSK);
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return -EINVAL;
-
-	if (!iwl_is_alive(priv))
-		return -1;
-
-	/* always get timestamp with Rx frame */
-	staging_rxon->flags |= RXON_FLG_TSF2HOST_MSK;
-
-	/* select antenna */
-	staging_rxon->flags &=
-	    ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK);
-	staging_rxon->flags |= iwl3945_get_antenna_flags(priv);
-
-	rc = iwl_check_rxon_cmd(priv, ctx);
-	if (rc) {
-		IWL_ERR(priv, "Invalid RXON configuration.  Not committing.\n");
-		return -EINVAL;
-	}
-
-	/* If we don't need to send a full RXON, we can use
-	 * iwl3945_rxon_assoc_cmd which is used to reconfigure filter
-	 * and other flags for the current radio configuration. */
-	if (!iwl_full_rxon_required(priv, &priv->contexts[IWL_RXON_CTX_BSS])) {
-		rc = iwl_send_rxon_assoc(priv,
-					 &priv->contexts[IWL_RXON_CTX_BSS]);
-		if (rc) {
-			IWL_ERR(priv, "Error setting RXON_ASSOC "
-				  "configuration (%d).\n", rc);
-			return rc;
-		}
-
-		memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
-
-		return 0;
-	}
-
-	/* If we are currently associated and the new config requires
-	 * an RXON_ASSOC and the new config wants the associated mask enabled,
-	 * we must clear the associated from the active configuration
-	 * before we apply the new config */
-	if (iwl_is_associated(priv, IWL_RXON_CTX_BSS) && new_assoc) {
-		IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n");
-		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-
-		/*
-		 * reserved4 and 5 could have been filled by the iwlcore code.
-		 * Let's clear them before pushing to the 3945.
-		 */
-		active_rxon->reserved4 = 0;
-		active_rxon->reserved5 = 0;
-		rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
-				      sizeof(struct iwl3945_rxon_cmd),
-				      &priv->contexts[IWL_RXON_CTX_BSS].active);
-
-		/* If the mask clearing failed then we set
-		 * active_rxon back to what it was previously */
-		if (rc) {
-			active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
-			IWL_ERR(priv, "Error clearing ASSOC_MSK on current "
-				  "configuration (%d).\n", rc);
-			return rc;
-		}
-		iwl_clear_ucode_stations(priv,
-					 &priv->contexts[IWL_RXON_CTX_BSS]);
-		iwl_restore_stations(priv, &priv->contexts[IWL_RXON_CTX_BSS]);
-	}
-
-	IWL_DEBUG_INFO(priv, "Sending RXON\n"
-		       "* with%s RXON_FILTER_ASSOC_MSK\n"
-		       "* channel = %d\n"
-		       "* bssid = %pM\n",
-		       (new_assoc ? "" : "out"),
-		       le16_to_cpu(staging_rxon->channel),
-		       staging_rxon->bssid_addr);
-
-	/*
-	 * reserved4 and 5 could have been filled by the iwlcore code.
-	 * Let's clear them before pushing to the 3945.
-	 */
-	staging_rxon->reserved4 = 0;
-	staging_rxon->reserved5 = 0;
-
-	iwl_set_rxon_hwcrypto(priv, ctx, !iwl3945_mod_params.sw_crypto);
-
-	/* Apply the new configuration */
-	rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
-			      sizeof(struct iwl3945_rxon_cmd),
-			      staging_rxon);
-	if (rc) {
-		IWL_ERR(priv, "Error setting new configuration (%d).\n", rc);
-		return rc;
-	}
-
-	memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
-
-	if (!new_assoc) {
-		iwl_clear_ucode_stations(priv,
-					 &priv->contexts[IWL_RXON_CTX_BSS]);
-		iwl_restore_stations(priv, &priv->contexts[IWL_RXON_CTX_BSS]);
-	}
-
-	/* If we issue a new RXON command which required a tune then we must
-	 * send a new TXPOWER command or we won't be able to Tx any frames */
-	rc = iwl_set_tx_power(priv, priv->tx_power_next, true);
-	if (rc) {
-		IWL_ERR(priv, "Error setting Tx power (%d).\n", rc);
-		return rc;
-	}
-
-	/* Init the hardware's rate fallback order based on the band */
-	rc = iwl3945_init_hw_rate_table(priv);
-	if (rc) {
-		IWL_ERR(priv, "Error setting HW rate table: %02X\n", rc);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-/**
- * iwl3945_reg_txpower_periodic -  called when time to check our temperature.
- *
- * -- reset periodic timer
- * -- see if temp has changed enough to warrant re-calibration ... if so:
- *     -- correct coeffs for temp (can reset temp timer)
- *     -- save this temp as "last",
- *     -- send new set of gain settings to NIC
- * NOTE:  This should continue working, even when we're not associated,
- *   so we can keep our internal table of scan powers current. */
-void iwl3945_reg_txpower_periodic(struct iwl_priv *priv)
-{
-	/* This will kick in the "brute force"
-	 * iwl3945_hw_reg_comp_txpower_temp() below */
-	if (!is_temp_calib_needed(priv))
-		goto reschedule;
-
-	/* Set up a new set of temp-adjusted TxPowers, send to NIC.
-	 * This is based *only* on current temperature,
-	 * ignoring any previous power measurements */
-	iwl3945_hw_reg_comp_txpower_temp(priv);
-
- reschedule:
-	queue_delayed_work(priv->workqueue,
-			   &priv->_3945.thermal_periodic, REG_RECALIB_PERIOD * HZ);
-}
-
-static void iwl3945_bg_reg_txpower_periodic(struct work_struct *work)
-{
-	struct iwl_priv *priv = container_of(work, struct iwl_priv,
-					     _3945.thermal_periodic.work);
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	mutex_lock(&priv->mutex);
-	iwl3945_reg_txpower_periodic(priv);
-	mutex_unlock(&priv->mutex);
-}
-
-/**
- * iwl3945_hw_reg_get_ch_grp_index - find the channel-group index (0-4)
- * 				   for the channel.
- *
- * This function is used when initializing channel-info structs.
- *
- * NOTE: These channel groups do *NOT* match the bands above!
- *	 These channel groups are based on factory-tested channels;
- *	 on A-band, EEPROM's "group frequency" entries represent the top
- *	 channel in each group 1-4.  Group 5 All B/G channels are in group 0.
- */
-static u16 iwl3945_hw_reg_get_ch_grp_index(struct iwl_priv *priv,
-				       const struct iwl_channel_info *ch_info)
-{
-	struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
-	struct iwl3945_eeprom_txpower_group *ch_grp = &eeprom->groups[0];
-	u8 group;
-	u16 group_index = 0;	/* based on factory calib frequencies */
-	u8 grp_channel;
-
-	/* Find the group index for the channel ... don't use index 1(?) */
-	if (is_channel_a_band(ch_info)) {
-		for (group = 1; group < 5; group++) {
-			grp_channel = ch_grp[group].group_channel;
-			if (ch_info->channel <= grp_channel) {
-				group_index = group;
-				break;
-			}
-		}
-		/* group 4 has a few channels *above* its factory cal freq */
-		if (group == 5)
-			group_index = 4;
-	} else
-		group_index = 0;	/* 2.4 GHz, group 0 */
-
-	IWL_DEBUG_POWER(priv, "Chnl %d mapped to grp %d\n", ch_info->channel,
-			group_index);
-	return group_index;
-}
-
-/**
- * iwl3945_hw_reg_get_matched_power_index - Interpolate to get nominal index
- *
- * Interpolate to get nominal (i.e. at factory calibration temperature) index
- *   into radio/DSP gain settings table for requested power.
- */
-static int iwl3945_hw_reg_get_matched_power_index(struct iwl_priv *priv,
-				       s8 requested_power,
-				       s32 setting_index, s32 *new_index)
-{
-	const struct iwl3945_eeprom_txpower_group *chnl_grp = NULL;
-	struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
-	s32 index0, index1;
-	s32 power = 2 * requested_power;
-	s32 i;
-	const struct iwl3945_eeprom_txpower_sample *samples;
-	s32 gains0, gains1;
-	s32 res;
-	s32 denominator;
-
-	chnl_grp = &eeprom->groups[setting_index];
-	samples = chnl_grp->samples;
-	for (i = 0; i < 5; i++) {
-		if (power == samples[i].power) {
-			*new_index = samples[i].gain_index;
-			return 0;
-		}
-	}
-
-	if (power > samples[1].power) {
-		index0 = 0;
-		index1 = 1;
-	} else if (power > samples[2].power) {
-		index0 = 1;
-		index1 = 2;
-	} else if (power > samples[3].power) {
-		index0 = 2;
-		index1 = 3;
-	} else {
-		index0 = 3;
-		index1 = 4;
-	}
-
-	denominator = (s32) samples[index1].power - (s32) samples[index0].power;
-	if (denominator == 0)
-		return -EINVAL;
-	gains0 = (s32) samples[index0].gain_index * (1 << 19);
-	gains1 = (s32) samples[index1].gain_index * (1 << 19);
-	res = gains0 + (gains1 - gains0) *
-	    ((s32) power - (s32) samples[index0].power) / denominator +
-	    (1 << 18);
-	*new_index = res >> 19;
-	return 0;
-}
-
-static void iwl3945_hw_reg_init_channel_groups(struct iwl_priv *priv)
-{
-	u32 i;
-	s32 rate_index;
-	struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
-	const struct iwl3945_eeprom_txpower_group *group;
-
-	IWL_DEBUG_POWER(priv, "Initializing factory calib info from EEPROM\n");
-
-	for (i = 0; i < IWL_NUM_TX_CALIB_GROUPS; i++) {
-		s8 *clip_pwrs;	/* table of power levels for each rate */
-		s8 satur_pwr;	/* saturation power for each chnl group */
-		group = &eeprom->groups[i];
-
-		/* sanity check on factory saturation power value */
-		if (group->saturation_power < 40) {
-			IWL_WARN(priv, "Error: saturation power is %d, "
-				    "less than minimum expected 40\n",
-				    group->saturation_power);
-			return;
-		}
-
-		/*
-		 * Derive requested power levels for each rate, based on
-		 *   hardware capabilities (saturation power for band).
-		 * Basic value is 3dB down from saturation, with further
-		 *   power reductions for highest 3 data rates.  These
-		 *   backoffs provide headroom for high rate modulation
-		 *   power peaks, without too much distortion (clipping).
-		 */
-		/* we'll fill in this array with h/w max power levels */
-		clip_pwrs = (s8 *) priv->_3945.clip_groups[i].clip_powers;
-
-		/* divide factory saturation power by 2 to find -3dB level */
-		satur_pwr = (s8) (group->saturation_power >> 1);
-
-		/* fill in channel group's nominal powers for each rate */
-		for (rate_index = 0;
-		     rate_index < IWL_RATE_COUNT_3945; rate_index++, clip_pwrs++) {
-			switch (rate_index) {
-			case IWL_RATE_36M_INDEX_TABLE:
-				if (i == 0)	/* B/G */
-					*clip_pwrs = satur_pwr;
-				else	/* A */
-					*clip_pwrs = satur_pwr - 5;
-				break;
-			case IWL_RATE_48M_INDEX_TABLE:
-				if (i == 0)
-					*clip_pwrs = satur_pwr - 7;
-				else
-					*clip_pwrs = satur_pwr - 10;
-				break;
-			case IWL_RATE_54M_INDEX_TABLE:
-				if (i == 0)
-					*clip_pwrs = satur_pwr - 9;
-				else
-					*clip_pwrs = satur_pwr - 12;
-				break;
-			default:
-				*clip_pwrs = satur_pwr;
-				break;
-			}
-		}
-	}
-}
-
-/**
- * iwl3945_txpower_set_from_eeprom - Set channel power info based on EEPROM
- *
- * Second pass (during init) to set up priv->channel_info
- *
- * Set up Tx-power settings in our channel info database for each VALID
- * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values
- * and current temperature.
- *
- * Since this is based on current temperature (at init time), these values may
- * not be valid for very long, but it gives us a starting/default point,
- * and allows us to active (i.e. using Tx) scan.
- *
- * This does *not* write values to NIC, just sets up our internal table.
- */
-int iwl3945_txpower_set_from_eeprom(struct iwl_priv *priv)
-{
-	struct iwl_channel_info *ch_info = NULL;
-	struct iwl3945_channel_power_info *pwr_info;
-	struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
-	int delta_index;
-	u8 rate_index;
-	u8 scan_tbl_index;
-	const s8 *clip_pwrs;	/* array of power levels for each rate */
-	u8 gain, dsp_atten;
-	s8 power;
-	u8 pwr_index, base_pwr_index, a_band;
-	u8 i;
-	int temperature;
-
-	/* save temperature reference,
-	 *   so we can determine next time to calibrate */
-	temperature = iwl3945_hw_reg_txpower_get_temperature(priv);
-	priv->last_temperature = temperature;
-
-	iwl3945_hw_reg_init_channel_groups(priv);
-
-	/* initialize Tx power info for each and every channel, 2.4 and 5.x */
-	for (i = 0, ch_info = priv->channel_info; i < priv->channel_count;
-	     i++, ch_info++) {
-		a_band = is_channel_a_band(ch_info);
-		if (!is_channel_valid(ch_info))
-			continue;
-
-		/* find this channel's channel group (*not* "band") index */
-		ch_info->group_index =
-			iwl3945_hw_reg_get_ch_grp_index(priv, ch_info);
-
-		/* Get this chnlgrp's rate->max/clip-powers table */
-		clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers;
-
-		/* calculate power index *adjustment* value according to
-		 *  diff between current temperature and factory temperature */
-		delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature,
-				eeprom->groups[ch_info->group_index].
-				temperature);
-
-		IWL_DEBUG_POWER(priv, "Delta index for channel %d: %d [%d]\n",
-				ch_info->channel, delta_index, temperature +
-				IWL_TEMP_CONVERT);
-
-		/* set tx power value for all OFDM rates */
-		for (rate_index = 0; rate_index < IWL_OFDM_RATES;
-		     rate_index++) {
-			s32 uninitialized_var(power_idx);
-			int rc;
-
-			/* use channel group's clip-power table,
-			 *   but don't exceed channel's max power */
-			s8 pwr = min(ch_info->max_power_avg,
-				     clip_pwrs[rate_index]);
-
-			pwr_info = &ch_info->power_info[rate_index];
-
-			/* get base (i.e. at factory-measured temperature)
-			 *    power table index for this rate's power */
-			rc = iwl3945_hw_reg_get_matched_power_index(priv, pwr,
-							 ch_info->group_index,
-							 &power_idx);
-			if (rc) {
-				IWL_ERR(priv, "Invalid power index\n");
-				return rc;
-			}
-			pwr_info->base_power_index = (u8) power_idx;
-
-			/* temperature compensate */
-			power_idx += delta_index;
-
-			/* stay within range of gain table */
-			power_idx = iwl3945_hw_reg_fix_power_index(power_idx);
-
-			/* fill 1 OFDM rate's iwl3945_channel_power_info struct */
-			pwr_info->requested_power = pwr;
-			pwr_info->power_table_index = (u8) power_idx;
-			pwr_info->tpc.tx_gain =
-			    power_gain_table[a_band][power_idx].tx_gain;
-			pwr_info->tpc.dsp_atten =
-			    power_gain_table[a_band][power_idx].dsp_atten;
-		}
-
-		/* set tx power for CCK rates, based on OFDM 12 Mbit settings*/
-		pwr_info = &ch_info->power_info[IWL_RATE_12M_INDEX_TABLE];
-		power = pwr_info->requested_power +
-			IWL_CCK_FROM_OFDM_POWER_DIFF;
-		pwr_index = pwr_info->power_table_index +
-			IWL_CCK_FROM_OFDM_INDEX_DIFF;
-		base_pwr_index = pwr_info->base_power_index +
-			IWL_CCK_FROM_OFDM_INDEX_DIFF;
-
-		/* stay within table range */
-		pwr_index = iwl3945_hw_reg_fix_power_index(pwr_index);
-		gain = power_gain_table[a_band][pwr_index].tx_gain;
-		dsp_atten = power_gain_table[a_band][pwr_index].dsp_atten;
-
-		/* fill each CCK rate's iwl3945_channel_power_info structure
-		 * NOTE:  All CCK-rate Txpwrs are the same for a given chnl!
-		 * NOTE:  CCK rates start at end of OFDM rates! */
-		for (rate_index = 0;
-		     rate_index < IWL_CCK_RATES; rate_index++) {
-			pwr_info = &ch_info->power_info[rate_index+IWL_OFDM_RATES];
-			pwr_info->requested_power = power;
-			pwr_info->power_table_index = pwr_index;
-			pwr_info->base_power_index = base_pwr_index;
-			pwr_info->tpc.tx_gain = gain;
-			pwr_info->tpc.dsp_atten = dsp_atten;
-		}
-
-		/* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
-		for (scan_tbl_index = 0;
-		     scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) {
-			s32 actual_index = (scan_tbl_index == 0) ?
-				IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE;
-			iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index,
-				actual_index, clip_pwrs, ch_info, a_band);
-		}
-	}
-
-	return 0;
-}
-
-int iwl3945_hw_rxq_stop(struct iwl_priv *priv)
-{
-	int rc;
-
-	iwl_write_direct32(priv, FH39_RCSR_CONFIG(0), 0);
-	rc = iwl_poll_direct_bit(priv, FH39_RSSR_STATUS,
-			FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
-	if (rc < 0)
-		IWL_ERR(priv, "Can't stop Rx DMA.\n");
-
-	return 0;
-}
-
-int iwl3945_hw_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq)
-{
-	int txq_id = txq->q.id;
-
-	struct iwl3945_shared *shared_data = priv->_3945.shared_virt;
-
-	shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32)txq->q.dma_addr);
-
-	iwl_write_direct32(priv, FH39_CBCC_CTRL(txq_id), 0);
-	iwl_write_direct32(priv, FH39_CBCC_BASE(txq_id), 0);
-
-	iwl_write_direct32(priv, FH39_TCSR_CONFIG(txq_id),
-		FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT |
-		FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF |
-		FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD |
-		FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL |
-		FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE);
-
-	/* fake read to flush all prev. writes */
-	iwl_read32(priv, FH39_TSSR_CBB_BASE);
-
-	return 0;
-}
-
-/*
- * HCMD utils
- */
-static u16 iwl3945_get_hcmd_size(u8 cmd_id, u16 len)
-{
-	switch (cmd_id) {
-	case REPLY_RXON:
-		return sizeof(struct iwl3945_rxon_cmd);
-	case POWER_TABLE_CMD:
-		return sizeof(struct iwl3945_powertable_cmd);
-	default:
-		return len;
-	}
-}
-
-
-static u16 iwl3945_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
-{
-	struct iwl3945_addsta_cmd *addsta = (struct iwl3945_addsta_cmd *)data;
-	addsta->mode = cmd->mode;
-	memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
-	memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo));
-	addsta->station_flags = cmd->station_flags;
-	addsta->station_flags_msk = cmd->station_flags_msk;
-	addsta->tid_disable_tx = cpu_to_le16(0);
-	addsta->rate_n_flags = cmd->rate_n_flags;
-	addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
-	addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
-	addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
-
-	return (u16)sizeof(struct iwl3945_addsta_cmd);
-}
-
-static int iwl3945_add_bssid_station(struct iwl_priv *priv,
-				     const u8 *addr, u8 *sta_id_r)
-{
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-	int ret;
-	u8 sta_id;
-	unsigned long flags;
-
-	if (sta_id_r)
-		*sta_id_r = IWL_INVALID_STATION;
-
-	ret = iwl_add_station_common(priv, ctx, addr, 0, NULL, &sta_id);
-	if (ret) {
-		IWL_ERR(priv, "Unable to add station %pM\n", addr);
-		return ret;
-	}
-
-	if (sta_id_r)
-		*sta_id_r = sta_id;
-
-	spin_lock_irqsave(&priv->sta_lock, flags);
-	priv->stations[sta_id].used |= IWL_STA_LOCAL;
-	spin_unlock_irqrestore(&priv->sta_lock, flags);
-
-	return 0;
-}
-static int iwl3945_manage_ibss_station(struct iwl_priv *priv,
-				       struct ieee80211_vif *vif, bool add)
-{
-	struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
-	int ret;
-
-	if (add) {
-		ret = iwl3945_add_bssid_station(priv, vif->bss_conf.bssid,
-						&vif_priv->ibss_bssid_sta_id);
-		if (ret)
-			return ret;
-
-		iwl3945_sync_sta(priv, vif_priv->ibss_bssid_sta_id,
-				 (priv->band == IEEE80211_BAND_5GHZ) ?
-				 IWL_RATE_6M_PLCP : IWL_RATE_1M_PLCP);
-		iwl3945_rate_scale_init(priv->hw, vif_priv->ibss_bssid_sta_id);
-
-		return 0;
-	}
-
-	return iwl_remove_station(priv, vif_priv->ibss_bssid_sta_id,
-				  vif->bss_conf.bssid);
-}
-
-/**
- * iwl3945_init_hw_rate_table - Initialize the hardware rate fallback table
- */
-int iwl3945_init_hw_rate_table(struct iwl_priv *priv)
-{
-	int rc, i, index, prev_index;
-	struct iwl3945_rate_scaling_cmd rate_cmd = {
-		.reserved = {0, 0, 0},
-	};
-	struct iwl3945_rate_scaling_info *table = rate_cmd.table;
-
-	for (i = 0; i < ARRAY_SIZE(iwl3945_rates); i++) {
-		index = iwl3945_rates[i].table_rs_index;
-
-		table[index].rate_n_flags =
-			iwl3945_hw_set_rate_n_flags(iwl3945_rates[i].plcp, 0);
-		table[index].try_cnt = priv->retry_rate;
-		prev_index = iwl3945_get_prev_ieee_rate(i);
-		table[index].next_rate_index =
-				iwl3945_rates[prev_index].table_rs_index;
-	}
-
-	switch (priv->band) {
-	case IEEE80211_BAND_5GHZ:
-		IWL_DEBUG_RATE(priv, "Select A mode rate scale\n");
-		/* If one of the following CCK rates is used,
-		 * have it fall back to the 6M OFDM rate */
-		for (i = IWL_RATE_1M_INDEX_TABLE;
-			i <= IWL_RATE_11M_INDEX_TABLE; i++)
-			table[i].next_rate_index =
-			  iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index;
-
-		/* Don't fall back to CCK rates */
-		table[IWL_RATE_12M_INDEX_TABLE].next_rate_index =
-						IWL_RATE_9M_INDEX_TABLE;
-
-		/* Don't drop out of OFDM rates */
-		table[IWL_RATE_6M_INDEX_TABLE].next_rate_index =
-		    iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index;
-		break;
-
-	case IEEE80211_BAND_2GHZ:
-		IWL_DEBUG_RATE(priv, "Select B/G mode rate scale\n");
-		/* If an OFDM rate is used, have it fall back to the
-		 * 1M CCK rates */
-
-		if (!(priv->_3945.sta_supp_rates & IWL_OFDM_RATES_MASK) &&
-		    iwl_is_associated(priv, IWL_RXON_CTX_BSS)) {
-
-			index = IWL_FIRST_CCK_RATE;
-			for (i = IWL_RATE_6M_INDEX_TABLE;
-			     i <= IWL_RATE_54M_INDEX_TABLE; i++)
-				table[i].next_rate_index =
-					iwl3945_rates[index].table_rs_index;
-
-			index = IWL_RATE_11M_INDEX_TABLE;
-			/* CCK shouldn't fall back to OFDM... */
-			table[index].next_rate_index = IWL_RATE_5M_INDEX_TABLE;
-		}
-		break;
-
-	default:
-		WARN_ON(1);
-		break;
-	}
-
-	/* Update the rate scaling for control frame Tx */
-	rate_cmd.table_id = 0;
-	rc = iwl_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd),
-			      &rate_cmd);
-	if (rc)
-		return rc;
-
-	/* Update the rate scaling for data frame Tx */
-	rate_cmd.table_id = 1;
-	return iwl_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd),
-				&rate_cmd);
-}
-
-/* Called when initializing driver */
-int iwl3945_hw_set_hw_params(struct iwl_priv *priv)
-{
-	memset((void *)&priv->hw_params, 0,
-	       sizeof(struct iwl_hw_params));
-
-	priv->_3945.shared_virt =
-		dma_alloc_coherent(&priv->pci_dev->dev,
-				   sizeof(struct iwl3945_shared),
-				   &priv->_3945.shared_phys, GFP_KERNEL);
-	if (!priv->_3945.shared_virt) {
-		IWL_ERR(priv, "failed to allocate pci memory\n");
-		return -ENOMEM;
-	}
-
-	/* Assign number of Usable TX queues */
-	priv->hw_params.max_txq_num = priv->cfg->base_params->num_of_queues;
-
-	priv->hw_params.tfd_size = sizeof(struct iwl3945_tfd);
-	priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_3K);
-	priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
-	priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
-	priv->hw_params.max_stations = IWL3945_STATION_COUNT;
-	priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWL3945_BROADCAST_ID;
-
-	priv->sta_key_max_num = STA_KEY_MAX_NUM;
-
-	priv->hw_params.rx_wrt_ptr_reg = FH39_RSCSR_CHNL0_WPTR;
-	priv->hw_params.max_beacon_itrvl = IWL39_MAX_UCODE_BEACON_INTERVAL;
-	priv->hw_params.beacon_time_tsf_bits = IWL3945_EXT_BEACON_TIME_POS;
-
-	return 0;
-}
-
-unsigned int iwl3945_hw_get_beacon_cmd(struct iwl_priv *priv,
-			  struct iwl3945_frame *frame, u8 rate)
-{
-	struct iwl3945_tx_beacon_cmd *tx_beacon_cmd;
-	unsigned int frame_size;
-
-	tx_beacon_cmd = (struct iwl3945_tx_beacon_cmd *)&frame->u;
-	memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
-
-	tx_beacon_cmd->tx.sta_id =
-		priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id;
-	tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
-
-	frame_size = iwl3945_fill_beacon_frame(priv,
-				tx_beacon_cmd->frame,
-				sizeof(frame->u) - sizeof(*tx_beacon_cmd));
-
-	BUG_ON(frame_size > MAX_MPDU_SIZE);
-	tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
-
-	tx_beacon_cmd->tx.rate = rate;
-	tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK |
-				      TX_CMD_FLG_TSF_MSK);
-
-	/* supp_rates[0] == OFDM start at IWL_FIRST_OFDM_RATE*/
-	tx_beacon_cmd->tx.supp_rates[0] =
-		(IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
-
-	tx_beacon_cmd->tx.supp_rates[1] =
-		(IWL_CCK_BASIC_RATES_MASK & 0xF);
-
-	return sizeof(struct iwl3945_tx_beacon_cmd) + frame_size;
-}
-
-void iwl3945_hw_rx_handler_setup(struct iwl_priv *priv)
-{
-	priv->rx_handlers[REPLY_TX] = iwl3945_rx_reply_tx;
-	priv->rx_handlers[REPLY_3945_RX] = iwl3945_rx_reply_rx;
-}
-
-void iwl3945_hw_setup_deferred_work(struct iwl_priv *priv)
-{
-	INIT_DELAYED_WORK(&priv->_3945.thermal_periodic,
-			  iwl3945_bg_reg_txpower_periodic);
-}
-
-void iwl3945_hw_cancel_deferred_work(struct iwl_priv *priv)
-{
-	cancel_delayed_work(&priv->_3945.thermal_periodic);
-}
-
-/* check contents of special bootstrap uCode SRAM */
-static int iwl3945_verify_bsm(struct iwl_priv *priv)
- {
-	__le32 *image = priv->ucode_boot.v_addr;
-	u32 len = priv->ucode_boot.len;
-	u32 reg;
-	u32 val;
-
-	IWL_DEBUG_INFO(priv, "Begin verify bsm\n");
-
-	/* verify BSM SRAM contents */
-	val = iwl_read_prph(priv, BSM_WR_DWCOUNT_REG);
-	for (reg = BSM_SRAM_LOWER_BOUND;
-	     reg < BSM_SRAM_LOWER_BOUND + len;
-	     reg += sizeof(u32), image++) {
-		val = iwl_read_prph(priv, reg);
-		if (val != le32_to_cpu(*image)) {
-			IWL_ERR(priv, "BSM uCode verification failed at "
-				  "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
-				  BSM_SRAM_LOWER_BOUND,
-				  reg - BSM_SRAM_LOWER_BOUND, len,
-				  val, le32_to_cpu(*image));
-			return -EIO;
-		}
-	}
-
-	IWL_DEBUG_INFO(priv, "BSM bootstrap uCode image OK\n");
-
-	return 0;
-}
-
-
-/******************************************************************************
- *
- * EEPROM related functions
- *
- ******************************************************************************/
-
-/*
- * Clear the OWNER_MSK, to establish driver (instead of uCode running on
- * embedded controller) as EEPROM reader; each read is a series of pulses
- * to/from the EEPROM chip, not a single event, so even reads could conflict
- * if they weren't arbitrated by some ownership mechanism.  Here, the driver
- * simply claims ownership, which should be safe when this function is called
- * (i.e. before loading uCode!).
- */
-static int iwl3945_eeprom_acquire_semaphore(struct iwl_priv *priv)
-{
-	_iwl_clear_bit(priv, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK);
-	return 0;
-}
-
-
-static void iwl3945_eeprom_release_semaphore(struct iwl_priv *priv)
-{
-	return;
-}
-
- /**
-  * iwl3945_load_bsm - Load bootstrap instructions
-  *
-  * BSM operation:
-  *
-  * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
-  * in special SRAM that does not power down during RFKILL.  When powering back
-  * up after power-saving sleeps (or during initial uCode load), the BSM loads
-  * the bootstrap program into the on-board processor, and starts it.
-  *
-  * The bootstrap program loads (via DMA) instructions and data for a new
-  * program from host DRAM locations indicated by the host driver in the
-  * BSM_DRAM_* registers.  Once the new program is loaded, it starts
-  * automatically.
-  *
-  * When initializing the NIC, the host driver points the BSM to the
-  * "initialize" uCode image.  This uCode sets up some internal data, then
-  * notifies host via "initialize alive" that it is complete.
-  *
-  * The host then replaces the BSM_DRAM_* pointer values to point to the
-  * normal runtime uCode instructions and a backup uCode data cache buffer
-  * (filled initially with starting data values for the on-board processor),
-  * then triggers the "initialize" uCode to load and launch the runtime uCode,
-  * which begins normal operation.
-  *
-  * When doing a power-save shutdown, runtime uCode saves data SRAM into
-  * the backup data cache in DRAM before SRAM is powered down.
-  *
-  * When powering back up, the BSM loads the bootstrap program.  This reloads
-  * the runtime uCode instructions and the backup data cache into SRAM,
-  * and re-launches the runtime uCode from where it left off.
-  */
-static int iwl3945_load_bsm(struct iwl_priv *priv)
-{
-	__le32 *image = priv->ucode_boot.v_addr;
-	u32 len = priv->ucode_boot.len;
-	dma_addr_t pinst;
-	dma_addr_t pdata;
-	u32 inst_len;
-	u32 data_len;
-	int rc;
-	int i;
-	u32 done;
-	u32 reg_offset;
-
-	IWL_DEBUG_INFO(priv, "Begin load bsm\n");
-
-	/* make sure bootstrap program is no larger than BSM's SRAM size */
-	if (len > IWL39_MAX_BSM_SIZE)
-		return -EINVAL;
-
-	/* Tell bootstrap uCode where to find the "Initialize" uCode
-	*   in host DRAM ... host DRAM physical address bits 31:0 for 3945.
-	* NOTE:  iwl3945_initialize_alive_start() will replace these values,
-	*        after the "initialize" uCode has run, to point to
-	*        runtime/protocol instructions and backup data cache. */
-	pinst = priv->ucode_init.p_addr;
-	pdata = priv->ucode_init_data.p_addr;
-	inst_len = priv->ucode_init.len;
-	data_len = priv->ucode_init_data.len;
-
-	iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
-	iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
-	iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
-	iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
-
-	/* Fill BSM memory with bootstrap instructions */
-	for (reg_offset = BSM_SRAM_LOWER_BOUND;
-	     reg_offset < BSM_SRAM_LOWER_BOUND + len;
-	     reg_offset += sizeof(u32), image++)
-		_iwl_write_prph(priv, reg_offset,
-					  le32_to_cpu(*image));
-
-	rc = iwl3945_verify_bsm(priv);
-	if (rc)
-		return rc;
-
-	/* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
-	iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
-	iwl_write_prph(priv, BSM_WR_MEM_DST_REG,
-				 IWL39_RTC_INST_LOWER_BOUND);
-	iwl_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
-
-	/* Load bootstrap code into instruction SRAM now,
-	 *   to prepare to load "initialize" uCode */
-	iwl_write_prph(priv, BSM_WR_CTRL_REG,
-		BSM_WR_CTRL_REG_BIT_START);
-
-	/* Wait for load of bootstrap uCode to finish */
-	for (i = 0; i < 100; i++) {
-		done = iwl_read_prph(priv, BSM_WR_CTRL_REG);
-		if (!(done & BSM_WR_CTRL_REG_BIT_START))
-			break;
-		udelay(10);
-	}
-	if (i < 100)
-		IWL_DEBUG_INFO(priv, "BSM write complete, poll %d iterations\n", i);
-	else {
-		IWL_ERR(priv, "BSM write did not complete!\n");
-		return -EIO;
-	}
-
-	/* Enable future boot loads whenever power management unit triggers it
-	 *   (e.g. when powering back up after power-save shutdown) */
-	iwl_write_prph(priv, BSM_WR_CTRL_REG,
-		BSM_WR_CTRL_REG_BIT_START_EN);
-
-	return 0;
-}
-
-static struct iwl_hcmd_ops iwl3945_hcmd = {
-	.rxon_assoc = iwl3945_send_rxon_assoc,
-	.commit_rxon = iwl3945_commit_rxon,
-	.send_bt_config = iwl_send_bt_config,
-};
-
-static struct iwl_lib_ops iwl3945_lib = {
-	.txq_attach_buf_to_tfd = iwl3945_hw_txq_attach_buf_to_tfd,
-	.txq_free_tfd = iwl3945_hw_txq_free_tfd,
-	.txq_init = iwl3945_hw_tx_queue_init,
-	.load_ucode = iwl3945_load_bsm,
-	.dump_nic_event_log = iwl3945_dump_nic_event_log,
-	.dump_nic_error_log = iwl3945_dump_nic_error_log,
-	.apm_ops = {
-		.init = iwl3945_apm_init,
-		.config = iwl3945_nic_config,
-	},
-	.eeprom_ops = {
-		.regulatory_bands = {
-			EEPROM_REGULATORY_BAND_1_CHANNELS,
-			EEPROM_REGULATORY_BAND_2_CHANNELS,
-			EEPROM_REGULATORY_BAND_3_CHANNELS,
-			EEPROM_REGULATORY_BAND_4_CHANNELS,
-			EEPROM_REGULATORY_BAND_5_CHANNELS,
-			EEPROM_REGULATORY_BAND_NO_HT40,
-			EEPROM_REGULATORY_BAND_NO_HT40,
-		},
-		.acquire_semaphore = iwl3945_eeprom_acquire_semaphore,
-		.release_semaphore = iwl3945_eeprom_release_semaphore,
-		.query_addr = iwlcore_eeprom_query_addr,
-	},
-	.send_tx_power	= iwl3945_send_tx_power,
-	.is_valid_rtc_data_addr = iwl3945_hw_valid_rtc_data_addr,
-	.isr_ops = {
-		.isr = iwl_isr_legacy,
-	},
-
-	.debugfs_ops = {
-		.rx_stats_read = iwl3945_ucode_rx_stats_read,
-		.tx_stats_read = iwl3945_ucode_tx_stats_read,
-		.general_stats_read = iwl3945_ucode_general_stats_read,
-	},
-};
-
-static const struct iwl_legacy_ops iwl3945_legacy_ops = {
-	.post_associate = iwl3945_post_associate,
-	.config_ap = iwl3945_config_ap,
-	.manage_ibss_station = iwl3945_manage_ibss_station,
-};
-
-static struct iwl_hcmd_utils_ops iwl3945_hcmd_utils = {
-	.get_hcmd_size = iwl3945_get_hcmd_size,
-	.build_addsta_hcmd = iwl3945_build_addsta_hcmd,
-	.tx_cmd_protection = iwl_legacy_tx_cmd_protection,
-	.request_scan = iwl3945_request_scan,
-	.post_scan = iwl3945_post_scan,
-};
-
-static const struct iwl_ops iwl3945_ops = {
-	.lib = &iwl3945_lib,
-	.hcmd = &iwl3945_hcmd,
-	.utils = &iwl3945_hcmd_utils,
-	.led = &iwl3945_led_ops,
-	.legacy = &iwl3945_legacy_ops,
-	.ieee80211_ops = &iwl3945_hw_ops,
-};
-
-static struct iwl_base_params iwl3945_base_params = {
-	.eeprom_size = IWL3945_EEPROM_IMG_SIZE,
-	.num_of_queues = IWL39_NUM_QUEUES,
-	.pll_cfg_val = CSR39_ANA_PLL_CFG_VAL,
-	.set_l0s = false,
-	.use_bsm = true,
-	.use_isr_legacy = true,
-	.led_compensation = 64,
-	.broken_powersave = true,
-	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
-	.wd_timeout = IWL_DEF_WD_TIMEOUT,
-	.max_event_log_size = 512,
-	.tx_power_by_driver = true,
-};
-
-static struct iwl_cfg iwl3945_bg_cfg = {
-	.name = "3945BG",
-	.fw_name_pre = IWL3945_FW_PRE,
-	.ucode_api_max = IWL3945_UCODE_API_MAX,
-	.ucode_api_min = IWL3945_UCODE_API_MIN,
-	.sku = IWL_SKU_G,
-	.eeprom_ver = EEPROM_3945_EEPROM_VERSION,
-	.ops = &iwl3945_ops,
-	.mod_params = &iwl3945_mod_params,
-	.base_params = &iwl3945_base_params,
-	.led_mode = IWL_LED_BLINK,
-};
-
-static struct iwl_cfg iwl3945_abg_cfg = {
-	.name = "3945ABG",
-	.fw_name_pre = IWL3945_FW_PRE,
-	.ucode_api_max = IWL3945_UCODE_API_MAX,
-	.ucode_api_min = IWL3945_UCODE_API_MIN,
-	.sku = IWL_SKU_A|IWL_SKU_G,
-	.eeprom_ver = EEPROM_3945_EEPROM_VERSION,
-	.ops = &iwl3945_ops,
-	.mod_params = &iwl3945_mod_params,
-	.base_params = &iwl3945_base_params,
-	.led_mode = IWL_LED_BLINK,
-};
-
-DEFINE_PCI_DEVICE_TABLE(iwl3945_hw_card_ids) = {
-	{IWL_PCI_DEVICE(0x4222, 0x1005, iwl3945_bg_cfg)},
-	{IWL_PCI_DEVICE(0x4222, 0x1034, iwl3945_bg_cfg)},
-	{IWL_PCI_DEVICE(0x4222, 0x1044, iwl3945_bg_cfg)},
-	{IWL_PCI_DEVICE(0x4227, 0x1014, iwl3945_bg_cfg)},
-	{IWL_PCI_DEVICE(0x4222, PCI_ANY_ID, iwl3945_abg_cfg)},
-	{IWL_PCI_DEVICE(0x4227, PCI_ANY_ID, iwl3945_abg_cfg)},
-	{0}
-};
-
-MODULE_DEVICE_TABLE(pci, iwl3945_hw_card_ids);
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
deleted file mode 100644
index 3eef1eb74a7..00000000000
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ /dev/null
@@ -1,308 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-/*
- * Please use this file (iwl-3945.h) for driver implementation definitions.
- * Please use iwl-3945-commands.h for uCode API definitions.
- * Please use iwl-3945-hw.h for hardware-related definitions.
- */
-
-#ifndef __iwl_3945_h__
-#define __iwl_3945_h__
-
-#include <linux/pci.h> /* for struct pci_device_id */
-#include <linux/kernel.h>
-#include <net/ieee80211_radiotap.h>
-
-/* Hardware specific file defines the PCI IDs table for that hardware module */
-extern const struct pci_device_id iwl3945_hw_card_ids[];
-
-#include "iwl-csr.h"
-#include "iwl-prph.h"
-#include "iwl-fh.h"
-#include "iwl-3945-hw.h"
-#include "iwl-debug.h"
-#include "iwl-power.h"
-#include "iwl-dev.h"
-#include "iwl-led.h"
-
-/* Highest firmware API version supported */
-#define IWL3945_UCODE_API_MAX 2
-
-/* Lowest firmware API version supported */
-#define IWL3945_UCODE_API_MIN 1
-
-#define IWL3945_FW_PRE	"iwlwifi-3945-"
-#define _IWL3945_MODULE_FIRMWARE(api) IWL3945_FW_PRE #api ".ucode"
-#define IWL3945_MODULE_FIRMWARE(api) _IWL3945_MODULE_FIRMWARE(api)
-
-/* Default noise level to report when noise measurement is not available.
- *   This may be because we're:
- *   1)  Not associated (4965, no beacon statistics being sent to driver)
- *   2)  Scanning (noise measurement does not apply to associated channel)
- *   3)  Receiving CCK (3945 delivers noise info only for OFDM frames)
- * Use default noise value of -127 ... this is below the range of measurable
- *   Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user.
- *   Also, -127 works better than 0 when averaging frames with/without
- *   noise info (e.g. averaging might be done in app); measured dBm values are
- *   always negative ... using a negative value as the default keeps all
- *   averages within an s8's (used in some apps) range of negative values. */
-#define IWL_NOISE_MEAS_NOT_AVAILABLE (-127)
-
-/* Module parameters accessible from iwl-*.c */
-extern struct iwl_mod_params iwl3945_mod_params;
-
-struct iwl3945_rate_scale_data {
-	u64 data;
-	s32 success_counter;
-	s32 success_ratio;
-	s32 counter;
-	s32 average_tpt;
-	unsigned long stamp;
-};
-
-struct iwl3945_rs_sta {
-	spinlock_t lock;
-	struct iwl_priv *priv;
-	s32 *expected_tpt;
-	unsigned long last_partial_flush;
-	unsigned long last_flush;
-	u32 flush_time;
-	u32 last_tx_packets;
-	u32 tx_packets;
-	u8 tgg;
-	u8 flush_pending;
-	u8 start_rate;
-	struct timer_list rate_scale_flush;
-	struct iwl3945_rate_scale_data win[IWL_RATE_COUNT_3945];
-#ifdef CONFIG_MAC80211_DEBUGFS
-	struct dentry *rs_sta_dbgfs_stats_table_file;
-#endif
-
-	/* used to be in sta_info */
-	int last_txrate_idx;
-};
-
-
-/*
- * The common struct MUST be first because it is shared between
- * 3945 and agn!
- */
-struct iwl3945_sta_priv {
-	struct iwl_station_priv_common common;
-	struct iwl3945_rs_sta rs_sta;
-};
-
-enum iwl3945_antenna {
-	IWL_ANTENNA_DIVERSITY,
-	IWL_ANTENNA_MAIN,
-	IWL_ANTENNA_AUX
-};
-
-/*
- * RTS threshold here is total size [2347] minus 4 FCS bytes
- * Per spec:
- *   a value of 0 means RTS on all data/management packets
- *   a value > max MSDU size means no RTS
- * else RTS for data/management frames where MPDU is larger
- *   than RTS value.
- */
-#define DEFAULT_RTS_THRESHOLD     2347U
-#define MIN_RTS_THRESHOLD         0U
-#define MAX_RTS_THRESHOLD         2347U
-#define MAX_MSDU_SIZE		  2304U
-#define MAX_MPDU_SIZE		  2346U
-#define DEFAULT_BEACON_INTERVAL   100U
-#define	DEFAULT_SHORT_RETRY_LIMIT 7U
-#define	DEFAULT_LONG_RETRY_LIMIT  4U
-
-#define IWL_TX_FIFO_AC0	0
-#define IWL_TX_FIFO_AC1	1
-#define IWL_TX_FIFO_AC2	2
-#define IWL_TX_FIFO_AC3	3
-#define IWL_TX_FIFO_HCCA_1	5
-#define IWL_TX_FIFO_HCCA_2	6
-#define IWL_TX_FIFO_NONE	7
-
-#define IEEE80211_DATA_LEN              2304
-#define IEEE80211_4ADDR_LEN             30
-#define IEEE80211_HLEN                  (IEEE80211_4ADDR_LEN)
-#define IEEE80211_FRAME_LEN             (IEEE80211_DATA_LEN + IEEE80211_HLEN)
-
-struct iwl3945_frame {
-	union {
-		struct ieee80211_hdr frame;
-		struct iwl3945_tx_beacon_cmd beacon;
-		u8 raw[IEEE80211_FRAME_LEN];
-		u8 cmd[360];
-	} u;
-	struct list_head list;
-};
-
-#define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
-#define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
-#define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4)
-
-#define SUP_RATE_11A_MAX_NUM_CHANNELS  8
-#define SUP_RATE_11B_MAX_NUM_CHANNELS  4
-#define SUP_RATE_11G_MAX_NUM_CHANNELS  12
-
-#define IWL_SUPPORTED_RATES_IE_LEN         8
-
-#define SCAN_INTERVAL 100
-
-#define MAX_TID_COUNT        9
-
-#define IWL_INVALID_RATE     0xFF
-#define IWL_INVALID_VALUE    -1
-
-#define STA_PS_STATUS_WAKE             0
-#define STA_PS_STATUS_SLEEP            1
-
-struct iwl3945_ibss_seq {
-	u8 mac[ETH_ALEN];
-	u16 seq_num;
-	u16 frag_num;
-	unsigned long packet_time;
-	struct list_head list;
-};
-
-#define IWL_RX_HDR(x) ((struct iwl3945_rx_frame_hdr *)(\
-		       x->u.rx_frame.stats.payload + \
-		       x->u.rx_frame.stats.phy_count))
-#define IWL_RX_END(x) ((struct iwl3945_rx_frame_end *)(\
-		       IWL_RX_HDR(x)->payload + \
-		       le16_to_cpu(IWL_RX_HDR(x)->len)))
-#define IWL_RX_STATS(x) (&x->u.rx_frame.stats)
-#define IWL_RX_DATA(x) (IWL_RX_HDR(x)->payload)
-
-
-/******************************************************************************
- *
- * Functions implemented in iwl-base.c which are forward declared here
- * for use by iwl-*.c
- *
- *****************************************************************************/
-extern int iwl3945_calc_db_from_ratio(int sig_ratio);
-extern void iwl3945_rx_replenish(void *data);
-extern void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq);
-extern unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv,
-					struct ieee80211_hdr *hdr,int left);
-extern int iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
-				       char **buf, bool display);
-extern void iwl3945_dump_nic_error_log(struct iwl_priv *priv);
-
-/******************************************************************************
- *
- * Functions implemented in iwl-[34]*.c which are forward declared here
- * for use by iwl-base.c
- *
- * NOTE:  The implementation of these functions are hardware specific
- * which is why they are in the hardware specific files (vs. iwl-base.c)
- *
- * Naming convention --
- * iwl3945_         <-- Its part of iwlwifi (should be changed to iwl3945_)
- * iwl3945_hw_      <-- Hardware specific (implemented in iwl-XXXX.c by all HW)
- * iwlXXXX_     <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
- * iwl3945_bg_      <-- Called from work queue context
- * iwl3945_mac_     <-- mac80211 callback
- *
- ****************************************************************************/
-extern void iwl3945_hw_rx_handler_setup(struct iwl_priv *priv);
-extern void iwl3945_hw_setup_deferred_work(struct iwl_priv *priv);
-extern void iwl3945_hw_cancel_deferred_work(struct iwl_priv *priv);
-extern int iwl3945_hw_rxq_stop(struct iwl_priv *priv);
-extern int iwl3945_hw_set_hw_params(struct iwl_priv *priv);
-extern int iwl3945_hw_nic_init(struct iwl_priv *priv);
-extern int iwl3945_hw_nic_stop_master(struct iwl_priv *priv);
-extern void iwl3945_hw_txq_ctx_free(struct iwl_priv *priv);
-extern void iwl3945_hw_txq_ctx_stop(struct iwl_priv *priv);
-extern int iwl3945_hw_nic_reset(struct iwl_priv *priv);
-extern int iwl3945_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv,
-					    struct iwl_tx_queue *txq,
-					    dma_addr_t addr, u16 len,
-					    u8 reset, u8 pad);
-extern void iwl3945_hw_txq_free_tfd(struct iwl_priv *priv,
-				    struct iwl_tx_queue *txq);
-extern int iwl3945_hw_get_temperature(struct iwl_priv *priv);
-extern int iwl3945_hw_tx_queue_init(struct iwl_priv *priv,
-				struct iwl_tx_queue *txq);
-extern unsigned int iwl3945_hw_get_beacon_cmd(struct iwl_priv *priv,
-				 struct iwl3945_frame *frame, u8 rate);
-void iwl3945_hw_build_tx_cmd_rate(struct iwl_priv *priv,
-				  struct iwl_device_cmd *cmd,
-				  struct ieee80211_tx_info *info,
-				  struct ieee80211_hdr *hdr,
-				  int sta_id, int tx_id);
-extern int iwl3945_hw_reg_send_txpower(struct iwl_priv *priv);
-extern int iwl3945_hw_reg_set_txpower(struct iwl_priv *priv, s8 power);
-extern void iwl3945_hw_rx_statistics(struct iwl_priv *priv,
-				 struct iwl_rx_mem_buffer *rxb);
-void iwl3945_reply_statistics(struct iwl_priv *priv,
-			      struct iwl_rx_mem_buffer *rxb);
-extern void iwl3945_disable_events(struct iwl_priv *priv);
-extern int iwl4965_get_temperature(const struct iwl_priv *priv);
-extern void iwl3945_post_associate(struct iwl_priv *priv);
-extern void iwl3945_config_ap(struct iwl_priv *priv);
-
-extern int iwl3945_commit_rxon(struct iwl_priv *priv,
-			       struct iwl_rxon_context *ctx);
-
-/**
- * iwl3945_hw_find_station - Find station id for a given BSSID
- * @bssid: MAC address of station ID to find
- *
- * NOTE:  This should not be hardware specific but the code has
- * not yet been merged into a single common layer for managing the
- * station tables.
- */
-extern u8 iwl3945_hw_find_station(struct iwl_priv *priv, const u8 *bssid);
-
-extern struct ieee80211_ops iwl3945_hw_ops;
-
-/*
- * Forward declare iwl-3945.c functions for iwl-base.c
- */
-extern __le32 iwl3945_get_antenna_flags(const struct iwl_priv *priv);
-extern int iwl3945_init_hw_rate_table(struct iwl_priv *priv);
-extern void iwl3945_reg_txpower_periodic(struct iwl_priv *priv);
-extern int iwl3945_txpower_set_from_eeprom(struct iwl_priv *priv);
-
-extern const struct iwl_channel_info *iwl3945_get_channel_info(
-	const struct iwl_priv *priv, enum ieee80211_band band, u16 channel);
-
-extern int iwl3945_rs_next_rate(struct iwl_priv *priv, int rate);
-
-/* scanning */
-int iwl3945_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif);
-void iwl3945_post_scan(struct iwl_priv *priv);
-
-/* rates */
-extern const struct iwl3945_rate_info iwl3945_rates[IWL_RATE_COUNT_3945];
-
-/* Requires full declaration of iwl_priv before including */
-#include "iwl-io.h"
-
-#endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
deleted file mode 100644
index 9166794eda0..00000000000
--- a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
+++ /dev/null
@@ -1,792 +0,0 @@
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *  * Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *  * Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *  * Neither the name Intel Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-/*
- * Please use this file (iwl-4965-hw.h) only for hardware-related definitions.
- * Use iwl-commands.h for uCode API definitions.
- * Use iwl-dev.h for driver implementation definitions.
- */
-
-#ifndef __iwl_4965_hw_h__
-#define __iwl_4965_hw_h__
-
-#include "iwl-fh.h"
-
-/* EEPROM */
-#define IWL4965_EEPROM_IMG_SIZE			1024
-
-/*
- * uCode queue management definitions ...
- * The first queue used for block-ack aggregation is #7 (4965 only).
- * All block-ack aggregation queues should map to Tx DMA/FIFO channel 7.
- */
-#define IWL49_FIRST_AMPDU_QUEUE	7
-
-/* Sizes and addresses for instruction and data memory (SRAM) in
- * 4965's embedded processor.  Driver access is via HBUS_TARG_MEM_* regs. */
-#define IWL49_RTC_INST_LOWER_BOUND		(0x000000)
-#define IWL49_RTC_INST_UPPER_BOUND		(0x018000)
-
-#define IWL49_RTC_DATA_LOWER_BOUND		(0x800000)
-#define IWL49_RTC_DATA_UPPER_BOUND		(0x80A000)
-
-#define IWL49_RTC_INST_SIZE  (IWL49_RTC_INST_UPPER_BOUND - \
-				IWL49_RTC_INST_LOWER_BOUND)
-#define IWL49_RTC_DATA_SIZE  (IWL49_RTC_DATA_UPPER_BOUND - \
-				IWL49_RTC_DATA_LOWER_BOUND)
-
-#define IWL49_MAX_INST_SIZE IWL49_RTC_INST_SIZE
-#define IWL49_MAX_DATA_SIZE IWL49_RTC_DATA_SIZE
-
-/* Size of uCode instruction memory in bootstrap state machine */
-#define IWL49_MAX_BSM_SIZE BSM_SRAM_SIZE
-
-static inline int iwl4965_hw_valid_rtc_data_addr(u32 addr)
-{
-	return (addr >= IWL49_RTC_DATA_LOWER_BOUND) &&
-	       (addr < IWL49_RTC_DATA_UPPER_BOUND);
-}
-
-/********************* START TEMPERATURE *************************************/
-
-/**
- * 4965 temperature calculation.
- *
- * The driver must calculate the device temperature before calculating
- * a txpower setting (amplifier gain is temperature dependent).  The
- * calculation uses 4 measurements, 3 of which (R1, R2, R3) are calibration
- * values used for the life of the driver, and one of which (R4) is the
- * real-time temperature indicator.
- *
- * uCode provides all 4 values to the driver via the "initialize alive"
- * notification (see struct iwl4965_init_alive_resp).  After the runtime uCode
- * image loads, uCode updates the R4 value via statistics notifications
- * (see STATISTICS_NOTIFICATION), which occur after each received beacon
- * when associated, or can be requested via REPLY_STATISTICS_CMD.
- *
- * NOTE:  uCode provides the R4 value as a 23-bit signed value.  Driver
- *        must sign-extend to 32 bits before applying formula below.
- *
- * Formula:
- *
- * degrees Kelvin = ((97 * 259 * (R4 - R2) / (R3 - R1)) / 100) + 8
- *
- * NOTE:  The basic formula is 259 * (R4-R2) / (R3-R1).  The 97/100 is
- * an additional correction, which should be centered around 0 degrees
- * Celsius (273 degrees Kelvin).  The 8 (3 percent of 273) compensates for
- * centering the 97/100 correction around 0 degrees K.
- *
- * Add 273 to Kelvin value to find degrees Celsius, for comparing current
- * temperature with factory-measured temperatures when calculating txpower
- * settings.
- */
-#define TEMPERATURE_CALIB_KELVIN_OFFSET 8
-#define TEMPERATURE_CALIB_A_VAL 259
-
-/* Limit range of calculated temperature to be between these Kelvin values */
-#define IWL_TX_POWER_TEMPERATURE_MIN  (263)
-#define IWL_TX_POWER_TEMPERATURE_MAX  (410)
-
-#define IWL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(t) \
-	(((t) < IWL_TX_POWER_TEMPERATURE_MIN) || \
-	 ((t) > IWL_TX_POWER_TEMPERATURE_MAX))
-
-/********************* END TEMPERATURE ***************************************/
-
-/********************* START TXPOWER *****************************************/
-
-/**
- * 4965 txpower calculations rely on information from three sources:
- *
- *     1) EEPROM
- *     2) "initialize" alive notification
- *     3) statistics notifications
- *
- * EEPROM data consists of:
- *
- * 1)  Regulatory information (max txpower and channel usage flags) is provided
- *     separately for each channel that can possibly supported by 4965.
- *     40 MHz wide (.11n HT40) channels are listed separately from 20 MHz
- *     (legacy) channels.
- *
- *     See struct iwl4965_eeprom_channel for format, and struct iwl4965_eeprom
- *     for locations in EEPROM.
- *
- * 2)  Factory txpower calibration information is provided separately for
- *     sub-bands of contiguous channels.  2.4GHz has just one sub-band,
- *     but 5 GHz has several sub-bands.
- *
- *     In addition, per-band (2.4 and 5 Ghz) saturation txpowers are provided.
- *
- *     See struct iwl4965_eeprom_calib_info (and the tree of structures
- *     contained within it) for format, and struct iwl4965_eeprom for
- *     locations in EEPROM.
- *
- * "Initialization alive" notification (see struct iwl4965_init_alive_resp)
- * consists of:
- *
- * 1)  Temperature calculation parameters.
- *
- * 2)  Power supply voltage measurement.
- *
- * 3)  Tx gain compensation to balance 2 transmitters for MIMO use.
- *
- * Statistics notifications deliver:
- *
- * 1)  Current values for temperature param R4.
- */
-
-/**
- * To calculate a txpower setting for a given desired target txpower, channel,
- * modulation bit rate, and transmitter chain (4965 has 2 transmitters to
- * support MIMO and transmit diversity), driver must do the following:
- *
- * 1)  Compare desired txpower vs. (EEPROM) regulatory limit for this channel.
- *     Do not exceed regulatory limit; reduce target txpower if necessary.
- *
- *     If setting up txpowers for MIMO rates (rate indexes 8-15, 24-31),
- *     2 transmitters will be used simultaneously; driver must reduce the
- *     regulatory limit by 3 dB (half-power) for each transmitter, so the
- *     combined total output of the 2 transmitters is within regulatory limits.
- *
- *
- * 2)  Compare target txpower vs. (EEPROM) saturation txpower *reduced by
- *     backoff for this bit rate*.  Do not exceed (saturation - backoff[rate]);
- *     reduce target txpower if necessary.
- *
- *     Backoff values below are in 1/2 dB units (equivalent to steps in
- *     txpower gain tables):
- *
- *     OFDM 6 - 36 MBit:  10 steps (5 dB)
- *     OFDM 48 MBit:      15 steps (7.5 dB)
- *     OFDM 54 MBit:      17 steps (8.5 dB)
- *     OFDM 60 MBit:      20 steps (10 dB)
- *     CCK all rates:     10 steps (5 dB)
- *
- *     Backoff values apply to saturation txpower on a per-transmitter basis;
- *     when using MIMO (2 transmitters), each transmitter uses the same
- *     saturation level provided in EEPROM, and the same backoff values;
- *     no reduction (such as with regulatory txpower limits) is required.
- *
- *     Saturation and Backoff values apply equally to 20 Mhz (legacy) channel
- *     widths and 40 Mhz (.11n HT40) channel widths; there is no separate
- *     factory measurement for ht40 channels.
- *
- *     The result of this step is the final target txpower.  The rest of
- *     the steps figure out the proper settings for the device to achieve
- *     that target txpower.
- *
- *
- * 3)  Determine (EEPROM) calibration sub band for the target channel, by
- *     comparing against first and last channels in each sub band
- *     (see struct iwl4965_eeprom_calib_subband_info).
- *
- *
- * 4)  Linearly interpolate (EEPROM) factory calibration measurement sets,
- *     referencing the 2 factory-measured (sample) channels within the sub band.
- *
- *     Interpolation is based on difference between target channel's frequency
- *     and the sample channels' frequencies.  Since channel numbers are based
- *     on frequency (5 MHz between each channel number), this is equivalent
- *     to interpolating based on channel number differences.
- *
- *     Note that the sample channels may or may not be the channels at the
- *     edges of the sub band.  The target channel may be "outside" of the
- *     span of the sampled channels.
- *
- *     Driver may choose the pair (for 2 Tx chains) of measurements (see
- *     struct iwl4965_eeprom_calib_ch_info) for which the actual measured
- *     txpower comes closest to the desired txpower.  Usually, though,
- *     the middle set of measurements is closest to the regulatory limits,
- *     and is therefore a good choice for all txpower calculations (this
- *     assumes that high accuracy is needed for maximizing legal txpower,
- *     while lower txpower configurations do not need as much accuracy).
- *
- *     Driver should interpolate both members of the chosen measurement pair,
- *     i.e. for both Tx chains (radio transmitters), unless the driver knows
- *     that only one of the chains will be used (e.g. only one tx antenna
- *     connected, but this should be unusual).  The rate scaling algorithm
- *     switches antennas to find best performance, so both Tx chains will
- *     be used (although only one at a time) even for non-MIMO transmissions.
- *
- *     Driver should interpolate factory values for temperature, gain table
- *     index, and actual power.  The power amplifier detector values are
- *     not used by the driver.
- *
- *     Sanity check:  If the target channel happens to be one of the sample
- *     channels, the results should agree with the sample channel's
- *     measurements!
- *
- *
- * 5)  Find difference between desired txpower and (interpolated)
- *     factory-measured txpower.  Using (interpolated) factory gain table index
- *     (shown elsewhere) as a starting point, adjust this index lower to
- *     increase txpower, or higher to decrease txpower, until the target
- *     txpower is reached.  Each step in the gain table is 1/2 dB.
- *
- *     For example, if factory measured txpower is 16 dBm, and target txpower
- *     is 13 dBm, add 6 steps to the factory gain index to reduce txpower
- *     by 3 dB.
- *
- *
- * 6)  Find difference between current device temperature and (interpolated)
- *     factory-measured temperature for sub-band.  Factory values are in
- *     degrees Celsius.  To calculate current temperature, see comments for
- *     "4965 temperature calculation".
- *
- *     If current temperature is higher than factory temperature, driver must
- *     increase gain (lower gain table index), and vice verse.
- *
- *     Temperature affects gain differently for different channels:
- *
- *     2.4 GHz all channels:  3.5 degrees per half-dB step
- *     5 GHz channels 34-43:  4.5 degrees per half-dB step
- *     5 GHz channels >= 44:  4.0 degrees per half-dB step
- *
- *     NOTE:  Temperature can increase rapidly when transmitting, especially
- *            with heavy traffic at high txpowers.  Driver should update
- *            temperature calculations often under these conditions to
- *            maintain strong txpower in the face of rising temperature.
- *
- *
- * 7)  Find difference between current power supply voltage indicator
- *     (from "initialize alive") and factory-measured power supply voltage
- *     indicator (EEPROM).
- *
- *     If the current voltage is higher (indicator is lower) than factory
- *     voltage, gain should be reduced (gain table index increased) by:
- *
- *     (eeprom - current) / 7
- *
- *     If the current voltage is lower (indicator is higher) than factory
- *     voltage, gain should be increased (gain table index decreased) by:
- *
- *     2 * (current - eeprom) / 7
- *
- *     If number of index steps in either direction turns out to be > 2,
- *     something is wrong ... just use 0.
- *
- *     NOTE:  Voltage compensation is independent of band/channel.
- *
- *     NOTE:  "Initialize" uCode measures current voltage, which is assumed
- *            to be constant after this initial measurement.  Voltage
- *            compensation for txpower (number of steps in gain table)
- *            may be calculated once and used until the next uCode bootload.
- *
- *
- * 8)  If setting up txpowers for MIMO rates (rate indexes 8-15, 24-31),
- *     adjust txpower for each transmitter chain, so txpower is balanced
- *     between the two chains.  There are 5 pairs of tx_atten[group][chain]
- *     values in "initialize alive", one pair for each of 5 channel ranges:
- *
- *     Group 0:  5 GHz channel 34-43
- *     Group 1:  5 GHz channel 44-70
- *     Group 2:  5 GHz channel 71-124
- *     Group 3:  5 GHz channel 125-200
- *     Group 4:  2.4 GHz all channels
- *
- *     Add the tx_atten[group][chain] value to the index for the target chain.
- *     The values are signed, but are in pairs of 0 and a non-negative number,
- *     so as to reduce gain (if necessary) of the "hotter" channel.  This
- *     avoids any need to double-check for regulatory compliance after
- *     this step.
- *
- *
- * 9)  If setting up for a CCK rate, lower the gain by adding a CCK compensation
- *     value to the index:
- *
- *     Hardware rev B:  9 steps (4.5 dB)
- *     Hardware rev C:  5 steps (2.5 dB)
- *
- *     Hardware rev for 4965 can be determined by reading CSR_HW_REV_WA_REG,
- *     bits [3:2], 1 = B, 2 = C.
- *
- *     NOTE:  This compensation is in addition to any saturation backoff that
- *            might have been applied in an earlier step.
- *
- *
- * 10) Select the gain table, based on band (2.4 vs 5 GHz).
- *
- *     Limit the adjusted index to stay within the table!
- *
- *
- * 11) Read gain table entries for DSP and radio gain, place into appropriate
- *     location(s) in command (struct iwl4965_txpowertable_cmd).
- */
-
-/**
- * When MIMO is used (2 transmitters operating simultaneously), driver should
- * limit each transmitter to deliver a max of 3 dB below the regulatory limit
- * for the device.  That is, use half power for each transmitter, so total
- * txpower is within regulatory limits.
- *
- * The value "6" represents number of steps in gain table to reduce power 3 dB.
- * Each step is 1/2 dB.
- */
-#define IWL_TX_POWER_MIMO_REGULATORY_COMPENSATION (6)
-
-/**
- * CCK gain compensation.
- *
- * When calculating txpowers for CCK, after making sure that the target power
- * is within regulatory and saturation limits, driver must additionally
- * back off gain by adding these values to the gain table index.
- *
- * Hardware rev for 4965 can be determined by reading CSR_HW_REV_WA_REG,
- * bits [3:2], 1 = B, 2 = C.
- */
-#define IWL_TX_POWER_CCK_COMPENSATION_B_STEP (9)
-#define IWL_TX_POWER_CCK_COMPENSATION_C_STEP (5)
-
-/*
- * 4965 power supply voltage compensation for txpower
- */
-#define TX_POWER_IWL_VOLTAGE_CODES_PER_03V   (7)
-
-/**
- * Gain tables.
- *
- * The following tables contain pair of values for setting txpower, i.e.
- * gain settings for the output of the device's digital signal processor (DSP),
- * and for the analog gain structure of the transmitter.
- *
- * Each entry in the gain tables represents a step of 1/2 dB.  Note that these
- * are *relative* steps, not indications of absolute output power.  Output
- * power varies with temperature, voltage, and channel frequency, and also
- * requires consideration of average power (to satisfy regulatory constraints),
- * and peak power (to avoid distortion of the output signal).
- *
- * Each entry contains two values:
- * 1)  DSP gain (or sometimes called DSP attenuation).  This is a fine-grained
- *     linear value that multiplies the output of the digital signal processor,
- *     before being sent to the analog radio.
- * 2)  Radio gain.  This sets the analog gain of the radio Tx path.
- *     It is a coarser setting, and behaves in a logarithmic (dB) fashion.
- *
- * EEPROM contains factory calibration data for txpower.  This maps actual
- * measured txpower levels to gain settings in the "well known" tables
- * below ("well-known" means here that both factory calibration *and* the
- * driver work with the same table).
- *
- * There are separate tables for 2.4 GHz and 5 GHz bands.  The 5 GHz table
- * has an extension (into negative indexes), in case the driver needs to
- * boost power setting for high device temperatures (higher than would be
- * present during factory calibration).  A 5 Ghz EEPROM index of "40"
- * corresponds to the 49th entry in the table used by the driver.
- */
-#define MIN_TX_GAIN_INDEX		(0)  /* highest gain, lowest idx, 2.4 */
-#define MIN_TX_GAIN_INDEX_52GHZ_EXT	(-9) /* highest gain, lowest idx, 5 */
-
-/**
- * 2.4 GHz gain table
- *
- * Index    Dsp gain   Radio gain
- *   0        110         0x3f      (highest gain)
- *   1        104         0x3f
- *   2         98         0x3f
- *   3        110         0x3e
- *   4        104         0x3e
- *   5         98         0x3e
- *   6        110         0x3d
- *   7        104         0x3d
- *   8         98         0x3d
- *   9        110         0x3c
- *  10        104         0x3c
- *  11         98         0x3c
- *  12        110         0x3b
- *  13        104         0x3b
- *  14         98         0x3b
- *  15        110         0x3a
- *  16        104         0x3a
- *  17         98         0x3a
- *  18        110         0x39
- *  19        104         0x39
- *  20         98         0x39
- *  21        110         0x38
- *  22        104         0x38
- *  23         98         0x38
- *  24        110         0x37
- *  25        104         0x37
- *  26         98         0x37
- *  27        110         0x36
- *  28        104         0x36
- *  29         98         0x36
- *  30        110         0x35
- *  31        104         0x35
- *  32         98         0x35
- *  33        110         0x34
- *  34        104         0x34
- *  35         98         0x34
- *  36        110         0x33
- *  37        104         0x33
- *  38         98         0x33
- *  39        110         0x32
- *  40        104         0x32
- *  41         98         0x32
- *  42        110         0x31
- *  43        104         0x31
- *  44         98         0x31
- *  45        110         0x30
- *  46        104         0x30
- *  47         98         0x30
- *  48        110          0x6
- *  49        104          0x6
- *  50         98          0x6
- *  51        110          0x5
- *  52        104          0x5
- *  53         98          0x5
- *  54        110          0x4
- *  55        104          0x4
- *  56         98          0x4
- *  57        110          0x3
- *  58        104          0x3
- *  59         98          0x3
- *  60        110          0x2
- *  61        104          0x2
- *  62         98          0x2
- *  63        110          0x1
- *  64        104          0x1
- *  65         98          0x1
- *  66        110          0x0
- *  67        104          0x0
- *  68         98          0x0
- *  69         97            0
- *  70         96            0
- *  71         95            0
- *  72         94            0
- *  73         93            0
- *  74         92            0
- *  75         91            0
- *  76         90            0
- *  77         89            0
- *  78         88            0
- *  79         87            0
- *  80         86            0
- *  81         85            0
- *  82         84            0
- *  83         83            0
- *  84         82            0
- *  85         81            0
- *  86         80            0
- *  87         79            0
- *  88         78            0
- *  89         77            0
- *  90         76            0
- *  91         75            0
- *  92         74            0
- *  93         73            0
- *  94         72            0
- *  95         71            0
- *  96         70            0
- *  97         69            0
- *  98         68            0
- */
-
-/**
- * 5 GHz gain table
- *
- * Index    Dsp gain   Radio gain
- *  -9 	      123         0x3F      (highest gain)
- *  -8 	      117         0x3F
- *  -7        110         0x3F
- *  -6        104         0x3F
- *  -5         98         0x3F
- *  -4        110         0x3E
- *  -3        104         0x3E
- *  -2         98         0x3E
- *  -1        110         0x3D
- *   0        104         0x3D
- *   1         98         0x3D
- *   2        110         0x3C
- *   3        104         0x3C
- *   4         98         0x3C
- *   5        110         0x3B
- *   6        104         0x3B
- *   7         98         0x3B
- *   8        110         0x3A
- *   9        104         0x3A
- *  10         98         0x3A
- *  11        110         0x39
- *  12        104         0x39
- *  13         98         0x39
- *  14        110         0x38
- *  15        104         0x38
- *  16         98         0x38
- *  17        110         0x37
- *  18        104         0x37
- *  19         98         0x37
- *  20        110         0x36
- *  21        104         0x36
- *  22         98         0x36
- *  23        110         0x35
- *  24        104         0x35
- *  25         98         0x35
- *  26        110         0x34
- *  27        104         0x34
- *  28         98         0x34
- *  29        110         0x33
- *  30        104         0x33
- *  31         98         0x33
- *  32        110         0x32
- *  33        104         0x32
- *  34         98         0x32
- *  35        110         0x31
- *  36        104         0x31
- *  37         98         0x31
- *  38        110         0x30
- *  39        104         0x30
- *  40         98         0x30
- *  41        110         0x25
- *  42        104         0x25
- *  43         98         0x25
- *  44        110         0x24
- *  45        104         0x24
- *  46         98         0x24
- *  47        110         0x23
- *  48        104         0x23
- *  49         98         0x23
- *  50        110         0x22
- *  51        104         0x18
- *  52         98         0x18
- *  53        110         0x17
- *  54        104         0x17
- *  55         98         0x17
- *  56        110         0x16
- *  57        104         0x16
- *  58         98         0x16
- *  59        110         0x15
- *  60        104         0x15
- *  61         98         0x15
- *  62        110         0x14
- *  63        104         0x14
- *  64         98         0x14
- *  65        110         0x13
- *  66        104         0x13
- *  67         98         0x13
- *  68        110         0x12
- *  69        104         0x08
- *  70         98         0x08
- *  71        110         0x07
- *  72        104         0x07
- *  73         98         0x07
- *  74        110         0x06
- *  75        104         0x06
- *  76         98         0x06
- *  77        110         0x05
- *  78        104         0x05
- *  79         98         0x05
- *  80        110         0x04
- *  81        104         0x04
- *  82         98         0x04
- *  83        110         0x03
- *  84        104         0x03
- *  85         98         0x03
- *  86        110         0x02
- *  87        104         0x02
- *  88         98         0x02
- *  89        110         0x01
- *  90        104         0x01
- *  91         98         0x01
- *  92        110         0x00
- *  93        104         0x00
- *  94         98         0x00
- *  95         93         0x00
- *  96         88         0x00
- *  97         83         0x00
- *  98         78         0x00
- */
-
-
-/**
- * Sanity checks and default values for EEPROM regulatory levels.
- * If EEPROM values fall outside MIN/MAX range, use default values.
- *
- * Regulatory limits refer to the maximum average txpower allowed by
- * regulatory agencies in the geographies in which the device is meant
- * to be operated.  These limits are SKU-specific (i.e. geography-specific),
- * and channel-specific; each channel has an individual regulatory limit
- * listed in the EEPROM.
- *
- * Units are in half-dBm (i.e. "34" means 17 dBm).
- */
-#define IWL_TX_POWER_DEFAULT_REGULATORY_24   (34)
-#define IWL_TX_POWER_DEFAULT_REGULATORY_52   (34)
-#define IWL_TX_POWER_REGULATORY_MIN          (0)
-#define IWL_TX_POWER_REGULATORY_MAX          (34)
-
-/**
- * Sanity checks and default values for EEPROM saturation levels.
- * If EEPROM values fall outside MIN/MAX range, use default values.
- *
- * Saturation is the highest level that the output power amplifier can produce
- * without significant clipping distortion.  This is a "peak" power level.
- * Different types of modulation (i.e. various "rates", and OFDM vs. CCK)
- * require differing amounts of backoff, relative to their average power output,
- * in order to avoid clipping distortion.
- *
- * Driver must make sure that it is violating neither the saturation limit,
- * nor the regulatory limit, when calculating Tx power settings for various
- * rates.
- *
- * Units are in half-dBm (i.e. "38" means 19 dBm).
- */
-#define IWL_TX_POWER_DEFAULT_SATURATION_24   (38)
-#define IWL_TX_POWER_DEFAULT_SATURATION_52   (38)
-#define IWL_TX_POWER_SATURATION_MIN          (20)
-#define IWL_TX_POWER_SATURATION_MAX          (50)
-
-/**
- * Channel groups used for Tx Attenuation calibration (MIMO tx channel balance)
- * and thermal Txpower calibration.
- *
- * When calculating txpower, driver must compensate for current device
- * temperature; higher temperature requires higher gain.  Driver must calculate
- * current temperature (see "4965 temperature calculation"), then compare vs.
- * factory calibration temperature in EEPROM; if current temperature is higher
- * than factory temperature, driver must *increase* gain by proportions shown
- * in table below.  If current temperature is lower than factory, driver must
- * *decrease* gain.
- *
- * Different frequency ranges require different compensation, as shown below.
- */
-/* Group 0, 5.2 GHz ch 34-43:  4.5 degrees per 1/2 dB. */
-#define CALIB_IWL_TX_ATTEN_GR1_FCH 34
-#define CALIB_IWL_TX_ATTEN_GR1_LCH 43
-
-/* Group 1, 5.3 GHz ch 44-70:  4.0 degrees per 1/2 dB. */
-#define CALIB_IWL_TX_ATTEN_GR2_FCH 44
-#define CALIB_IWL_TX_ATTEN_GR2_LCH 70
-
-/* Group 2, 5.5 GHz ch 71-124:  4.0 degrees per 1/2 dB. */
-#define CALIB_IWL_TX_ATTEN_GR3_FCH 71
-#define CALIB_IWL_TX_ATTEN_GR3_LCH 124
-
-/* Group 3, 5.7 GHz ch 125-200:  4.0 degrees per 1/2 dB. */
-#define CALIB_IWL_TX_ATTEN_GR4_FCH 125
-#define CALIB_IWL_TX_ATTEN_GR4_LCH 200
-
-/* Group 4, 2.4 GHz all channels:  3.5 degrees per 1/2 dB. */
-#define CALIB_IWL_TX_ATTEN_GR5_FCH 1
-#define CALIB_IWL_TX_ATTEN_GR5_LCH 20
-
-enum {
-	CALIB_CH_GROUP_1 = 0,
-	CALIB_CH_GROUP_2 = 1,
-	CALIB_CH_GROUP_3 = 2,
-	CALIB_CH_GROUP_4 = 3,
-	CALIB_CH_GROUP_5 = 4,
-	CALIB_CH_GROUP_MAX
-};
-
-/********************* END TXPOWER *****************************************/
-
-
-/**
- * Tx/Rx Queues
- *
- * Most communication between driver and 4965 is via queues of data buffers.
- * For example, all commands that the driver issues to device's embedded
- * controller (uCode) are via the command queue (one of the Tx queues).  All
- * uCode command responses/replies/notifications, including Rx frames, are
- * conveyed from uCode to driver via the Rx queue.
- *
- * Most support for these queues, including handshake support, resides in
- * structures in host DRAM, shared between the driver and the device.  When
- * allocating this memory, the driver must make sure that data written by
- * the host CPU updates DRAM immediately (and does not get "stuck" in CPU's
- * cache memory), so DRAM and cache are consistent, and the device can
- * immediately see changes made by the driver.
- *
- * 4965 supports up to 16 DRAM-based Tx queues, and services these queues via
- * up to 7 DMA channels (FIFOs).  Each Tx queue is supported by a circular array
- * in DRAM containing 256 Transmit Frame Descriptors (TFDs).
- */
-#define IWL49_NUM_FIFOS 	7
-#define IWL49_CMD_FIFO_NUM	4
-#define IWL49_NUM_QUEUES	16
-#define IWL49_NUM_AMPDU_QUEUES	8
-
-
-/**
- * struct iwl4965_schedq_bc_tbl
- *
- * Byte Count table
- *
- * Each Tx queue uses a byte-count table containing 320 entries:
- * one 16-bit entry for each of 256 TFDs, plus an additional 64 entries that
- * duplicate the first 64 entries (to avoid wrap-around within a Tx window;
- * max Tx window is 64 TFDs).
- *
- * When driver sets up a new TFD, it must also enter the total byte count
- * of the frame to be transmitted into the corresponding entry in the byte
- * count table for the chosen Tx queue.  If the TFD index is 0-63, the driver
- * must duplicate the byte count entry in corresponding index 256-319.
- *
- * padding puts each byte count table on a 1024-byte boundary;
- * 4965 assumes tables are separated by 1024 bytes.
- */
-struct iwl4965_scd_bc_tbl {
-	__le16 tfd_offset[TFD_QUEUE_BC_SIZE];
-	u8 pad[1024 - (TFD_QUEUE_BC_SIZE) * sizeof(__le16)];
-} __packed;
-
-#endif /* !__iwl_4965_hw_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
deleted file mode 100644
index 8998ed134d1..00000000000
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ /dev/null
@@ -1,2666 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-#include <net/mac80211.h>
-#include <linux/etherdevice.h>
-#include <asm/unaligned.h>
-
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-io.h"
-#include "iwl-helpers.h"
-#include "iwl-agn-calib.h"
-#include "iwl-sta.h"
-#include "iwl-agn-led.h"
-#include "iwl-agn.h"
-#include "iwl-agn-debugfs.h"
-#include "iwl-legacy.h"
-
-static int iwl4965_send_tx_power(struct iwl_priv *priv);
-static int iwl4965_hw_get_temperature(struct iwl_priv *priv);
-
-/* Highest firmware API version supported */
-#define IWL4965_UCODE_API_MAX 2
-
-/* Lowest firmware API version supported */
-#define IWL4965_UCODE_API_MIN 2
-
-#define IWL4965_FW_PRE "iwlwifi-4965-"
-#define _IWL4965_MODULE_FIRMWARE(api) IWL4965_FW_PRE #api ".ucode"
-#define IWL4965_MODULE_FIRMWARE(api) _IWL4965_MODULE_FIRMWARE(api)
-
-/* check contents of special bootstrap uCode SRAM */
-static int iwl4965_verify_bsm(struct iwl_priv *priv)
-{
-	__le32 *image = priv->ucode_boot.v_addr;
-	u32 len = priv->ucode_boot.len;
-	u32 reg;
-	u32 val;
-
-	IWL_DEBUG_INFO(priv, "Begin verify bsm\n");
-
-	/* verify BSM SRAM contents */
-	val = iwl_read_prph(priv, BSM_WR_DWCOUNT_REG);
-	for (reg = BSM_SRAM_LOWER_BOUND;
-	     reg < BSM_SRAM_LOWER_BOUND + len;
-	     reg += sizeof(u32), image++) {
-		val = iwl_read_prph(priv, reg);
-		if (val != le32_to_cpu(*image)) {
-			IWL_ERR(priv, "BSM uCode verification failed at "
-				  "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
-				  BSM_SRAM_LOWER_BOUND,
-				  reg - BSM_SRAM_LOWER_BOUND, len,
-				  val, le32_to_cpu(*image));
-			return -EIO;
-		}
-	}
-
-	IWL_DEBUG_INFO(priv, "BSM bootstrap uCode image OK\n");
-
-	return 0;
-}
-
-/**
- * iwl4965_load_bsm - Load bootstrap instructions
- *
- * BSM operation:
- *
- * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
- * in special SRAM that does not power down during RFKILL.  When powering back
- * up after power-saving sleeps (or during initial uCode load), the BSM loads
- * the bootstrap program into the on-board processor, and starts it.
- *
- * The bootstrap program loads (via DMA) instructions and data for a new
- * program from host DRAM locations indicated by the host driver in the
- * BSM_DRAM_* registers.  Once the new program is loaded, it starts
- * automatically.
- *
- * When initializing the NIC, the host driver points the BSM to the
- * "initialize" uCode image.  This uCode sets up some internal data, then
- * notifies host via "initialize alive" that it is complete.
- *
- * The host then replaces the BSM_DRAM_* pointer values to point to the
- * normal runtime uCode instructions and a backup uCode data cache buffer
- * (filled initially with starting data values for the on-board processor),
- * then triggers the "initialize" uCode to load and launch the runtime uCode,
- * which begins normal operation.
- *
- * When doing a power-save shutdown, runtime uCode saves data SRAM into
- * the backup data cache in DRAM before SRAM is powered down.
- *
- * When powering back up, the BSM loads the bootstrap program.  This reloads
- * the runtime uCode instructions and the backup data cache into SRAM,
- * and re-launches the runtime uCode from where it left off.
- */
-static int iwl4965_load_bsm(struct iwl_priv *priv)
-{
-	__le32 *image = priv->ucode_boot.v_addr;
-	u32 len = priv->ucode_boot.len;
-	dma_addr_t pinst;
-	dma_addr_t pdata;
-	u32 inst_len;
-	u32 data_len;
-	int i;
-	u32 done;
-	u32 reg_offset;
-	int ret;
-
-	IWL_DEBUG_INFO(priv, "Begin load bsm\n");
-
-	priv->ucode_type = UCODE_RT;
-
-	/* make sure bootstrap program is no larger than BSM's SRAM size */
-	if (len > IWL49_MAX_BSM_SIZE)
-		return -EINVAL;
-
-	/* Tell bootstrap uCode where to find the "Initialize" uCode
-	 *   in host DRAM ... host DRAM physical address bits 35:4 for 4965.
-	 * NOTE:  iwl_init_alive_start() will replace these values,
-	 *        after the "initialize" uCode has run, to point to
-	 *        runtime/protocol instructions and backup data cache.
-	 */
-	pinst = priv->ucode_init.p_addr >> 4;
-	pdata = priv->ucode_init_data.p_addr >> 4;
-	inst_len = priv->ucode_init.len;
-	data_len = priv->ucode_init_data.len;
-
-	iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
-	iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
-	iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
-	iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
-
-	/* Fill BSM memory with bootstrap instructions */
-	for (reg_offset = BSM_SRAM_LOWER_BOUND;
-	     reg_offset < BSM_SRAM_LOWER_BOUND + len;
-	     reg_offset += sizeof(u32), image++)
-		_iwl_write_prph(priv, reg_offset, le32_to_cpu(*image));
-
-	ret = iwl4965_verify_bsm(priv);
-	if (ret)
-		return ret;
-
-	/* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
-	iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
-	iwl_write_prph(priv, BSM_WR_MEM_DST_REG, IWL49_RTC_INST_LOWER_BOUND);
-	iwl_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
-
-	/* Load bootstrap code into instruction SRAM now,
-	 *   to prepare to load "initialize" uCode */
-	iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START);
-
-	/* Wait for load of bootstrap uCode to finish */
-	for (i = 0; i < 100; i++) {
-		done = iwl_read_prph(priv, BSM_WR_CTRL_REG);
-		if (!(done & BSM_WR_CTRL_REG_BIT_START))
-			break;
-		udelay(10);
-	}
-	if (i < 100)
-		IWL_DEBUG_INFO(priv, "BSM write complete, poll %d iterations\n", i);
-	else {
-		IWL_ERR(priv, "BSM write did not complete!\n");
-		return -EIO;
-	}
-
-	/* Enable future boot loads whenever power management unit triggers it
-	 *   (e.g. when powering back up after power-save shutdown) */
-	iwl_write_prph(priv, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN);
-
-
-	return 0;
-}
-
-/**
- * iwl4965_set_ucode_ptrs - Set uCode address location
- *
- * Tell initialization uCode where to find runtime uCode.
- *
- * BSM registers initially contain pointers to initialization uCode.
- * We need to replace them to load runtime uCode inst and data,
- * and to save runtime data when powering down.
- */
-static int iwl4965_set_ucode_ptrs(struct iwl_priv *priv)
-{
-	dma_addr_t pinst;
-	dma_addr_t pdata;
-	int ret = 0;
-
-	/* bits 35:4 for 4965 */
-	pinst = priv->ucode_code.p_addr >> 4;
-	pdata = priv->ucode_data_backup.p_addr >> 4;
-
-	/* Tell bootstrap uCode where to find image to load */
-	iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
-	iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
-	iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG,
-				 priv->ucode_data.len);
-
-	/* Inst byte count must be last to set up, bit 31 signals uCode
-	 *   that all new ptr/size info is in place */
-	iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
-				 priv->ucode_code.len | BSM_DRAM_INST_LOAD);
-	IWL_DEBUG_INFO(priv, "Runtime uCode pointers are set.\n");
-
-	return ret;
-}
-
-/**
- * iwl4965_init_alive_start - Called after REPLY_ALIVE notification received
- *
- * Called after REPLY_ALIVE notification received from "initialize" uCode.
- *
- * The 4965 "initialize" ALIVE reply contains calibration data for:
- *   Voltage, temperature, and MIMO tx gain correction, now stored in priv
- *   (3945 does not contain this data).
- *
- * Tell "initialize" uCode to go ahead and load the runtime uCode.
-*/
-static void iwl4965_init_alive_start(struct iwl_priv *priv)
-{
-	/* Bootstrap uCode has loaded initialize uCode ... verify inst image.
-	 * This is a paranoid check, because we would not have gotten the
-	 * "initialize" alive if code weren't properly loaded.  */
-	if (iwl_verify_ucode(priv)) {
-		/* Runtime instruction load was bad;
-		 * take it all the way back down so we can try again */
-		IWL_DEBUG_INFO(priv, "Bad \"initialize\" uCode load.\n");
-		goto restart;
-	}
-
-	/* Calculate temperature */
-	priv->temperature = iwl4965_hw_get_temperature(priv);
-
-	/* Send pointers to protocol/runtime uCode image ... init code will
-	 * load and launch runtime uCode, which will send us another "Alive"
-	 * notification. */
-	IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
-	if (iwl4965_set_ucode_ptrs(priv)) {
-		/* Runtime instruction load won't happen;
-		 * take it all the way back down so we can try again */
-		IWL_DEBUG_INFO(priv, "Couldn't set up uCode pointers.\n");
-		goto restart;
-	}
-	return;
-
-restart:
-	queue_work(priv->workqueue, &priv->restart);
-}
-
-static bool is_ht40_channel(__le32 rxon_flags)
-{
-	int chan_mod = le32_to_cpu(rxon_flags & RXON_FLG_CHANNEL_MODE_MSK)
-				    >> RXON_FLG_CHANNEL_MODE_POS;
-	return ((chan_mod == CHANNEL_MODE_PURE_40) ||
-		  (chan_mod == CHANNEL_MODE_MIXED));
-}
-
-/*
- * EEPROM handlers
- */
-static u16 iwl4965_eeprom_calib_version(struct iwl_priv *priv)
-{
-	return iwl_eeprom_query16(priv, EEPROM_4965_CALIB_VERSION_OFFSET);
-}
-
-/*
- * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask
- * must be called under priv->lock and mac access
- */
-static void iwl4965_txq_set_sched(struct iwl_priv *priv, u32 mask)
-{
-	iwl_write_prph(priv, IWL49_SCD_TXFACT, mask);
-}
-
-static void iwl4965_nic_config(struct iwl_priv *priv)
-{
-	unsigned long flags;
-	u16 radio_cfg;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
-
-	/* write radio config values to register */
-	if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) == EEPROM_4965_RF_CFG_TYPE_MAX)
-		iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
-			    EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
-			    EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
-			    EEPROM_RF_CFG_DASH_MSK(radio_cfg));
-
-	/* set CSR_HW_CONFIG_REG for uCode use */
-	iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
-		    CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
-		    CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
-
-	priv->calib_info = (struct iwl_eeprom_calib_info *)
-		iwl_eeprom_query_addr(priv, EEPROM_4965_CALIB_TXPOWER_OFFSET);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-/* Reset differential Rx gains in NIC to prepare for chain noise calibration.
- * Called after every association, but this runs only once!
- *  ... once chain noise is calibrated the first time, it's good forever.  */
-static void iwl4965_chain_noise_reset(struct iwl_priv *priv)
-{
-	struct iwl_chain_noise_data *data = &(priv->chain_noise_data);
-
-	if ((data->state == IWL_CHAIN_NOISE_ALIVE) &&
-	    iwl_is_any_associated(priv)) {
-		struct iwl_calib_diff_gain_cmd cmd;
-
-		/* clear data for chain noise calibration algorithm */
-		data->chain_noise_a = 0;
-		data->chain_noise_b = 0;
-		data->chain_noise_c = 0;
-		data->chain_signal_a = 0;
-		data->chain_signal_b = 0;
-		data->chain_signal_c = 0;
-		data->beacon_count = 0;
-
-		memset(&cmd, 0, sizeof(cmd));
-		cmd.hdr.op_code = IWL_PHY_CALIBRATE_DIFF_GAIN_CMD;
-		cmd.diff_gain_a = 0;
-		cmd.diff_gain_b = 0;
-		cmd.diff_gain_c = 0;
-		if (iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
-				 sizeof(cmd), &cmd))
-			IWL_ERR(priv,
-				"Could not send REPLY_PHY_CALIBRATION_CMD\n");
-		data->state = IWL_CHAIN_NOISE_ACCUMULATE;
-		IWL_DEBUG_CALIB(priv, "Run chain_noise_calibrate\n");
-	}
-}
-
-static void iwl4965_gain_computation(struct iwl_priv *priv,
-		u32 *average_noise,
-		u16 min_average_noise_antenna_i,
-		u32 min_average_noise,
-		u8 default_chain)
-{
-	int i, ret;
-	struct iwl_chain_noise_data *data = &priv->chain_noise_data;
-
-	data->delta_gain_code[min_average_noise_antenna_i] = 0;
-
-	for (i = default_chain; i < NUM_RX_CHAINS; i++) {
-		s32 delta_g = 0;
-
-		if (!(data->disconn_array[i]) &&
-		    (data->delta_gain_code[i] ==
-			     CHAIN_NOISE_DELTA_GAIN_INIT_VAL)) {
-			delta_g = average_noise[i] - min_average_noise;
-			data->delta_gain_code[i] = (u8)((delta_g * 10) / 15);
-			data->delta_gain_code[i] =
-				min(data->delta_gain_code[i],
-				(u8) CHAIN_NOISE_MAX_DELTA_GAIN_CODE);
-
-			data->delta_gain_code[i] =
-				(data->delta_gain_code[i] | (1 << 2));
-		} else {
-			data->delta_gain_code[i] = 0;
-		}
-	}
-	IWL_DEBUG_CALIB(priv, "delta_gain_codes: a %d b %d c %d\n",
-		     data->delta_gain_code[0],
-		     data->delta_gain_code[1],
-		     data->delta_gain_code[2]);
-
-	/* Differential gain gets sent to uCode only once */
-	if (!data->radio_write) {
-		struct iwl_calib_diff_gain_cmd cmd;
-		data->radio_write = 1;
-
-		memset(&cmd, 0, sizeof(cmd));
-		cmd.hdr.op_code = IWL_PHY_CALIBRATE_DIFF_GAIN_CMD;
-		cmd.diff_gain_a = data->delta_gain_code[0];
-		cmd.diff_gain_b = data->delta_gain_code[1];
-		cmd.diff_gain_c = data->delta_gain_code[2];
-		ret = iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
-				      sizeof(cmd), &cmd);
-		if (ret)
-			IWL_DEBUG_CALIB(priv, "fail sending cmd "
-				     "REPLY_PHY_CALIBRATION_CMD\n");
-
-		/* TODO we might want recalculate
-		 * rx_chain in rxon cmd */
-
-		/* Mark so we run this algo only once! */
-		data->state = IWL_CHAIN_NOISE_CALIBRATED;
-	}
-}
-
-static void iwl4965_bg_txpower_work(struct work_struct *work)
-{
-	struct iwl_priv *priv = container_of(work, struct iwl_priv,
-			txpower_work);
-
-	/* If a scan happened to start before we got here
-	 * then just return; the statistics notification will
-	 * kick off another scheduled work to compensate for
-	 * any temperature delta we missed here. */
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
-	    test_bit(STATUS_SCANNING, &priv->status))
-		return;
-
-	mutex_lock(&priv->mutex);
-
-	/* Regardless of if we are associated, we must reconfigure the
-	 * TX power since frames can be sent on non-radar channels while
-	 * not associated */
-	iwl4965_send_tx_power(priv);
-
-	/* Update last_temperature to keep is_calib_needed from running
-	 * when it isn't needed... */
-	priv->last_temperature = priv->temperature;
-
-	mutex_unlock(&priv->mutex);
-}
-
-/*
- * Acquire priv->lock before calling this function !
- */
-static void iwl4965_set_wr_ptrs(struct iwl_priv *priv, int txq_id, u32 index)
-{
-	iwl_write_direct32(priv, HBUS_TARG_WRPTR,
-			     (index & 0xff) | (txq_id << 8));
-	iwl_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(txq_id), index);
-}
-
-/**
- * iwl4965_tx_queue_set_status - (optionally) start Tx/Cmd queue
- * @tx_fifo_id: Tx DMA/FIFO channel (range 0-7) that the queue will feed
- * @scd_retry: (1) Indicates queue will be used in aggregation mode
- *
- * NOTE:  Acquire priv->lock before calling this function !
- */
-static void iwl4965_tx_queue_set_status(struct iwl_priv *priv,
-					struct iwl_tx_queue *txq,
-					int tx_fifo_id, int scd_retry)
-{
-	int txq_id = txq->q.id;
-
-	/* Find out whether to activate Tx queue */
-	int active = test_bit(txq_id, &priv->txq_ctx_active_msk) ? 1 : 0;
-
-	/* Set up and activate */
-	iwl_write_prph(priv, IWL49_SCD_QUEUE_STATUS_BITS(txq_id),
-			 (active << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) |
-			 (tx_fifo_id << IWL49_SCD_QUEUE_STTS_REG_POS_TXF) |
-			 (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_WSL) |
-			 (scd_retry << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) |
-			 IWL49_SCD_QUEUE_STTS_REG_MSK);
-
-	txq->sched_retry = scd_retry;
-
-	IWL_DEBUG_INFO(priv, "%s %s Queue %d on AC %d\n",
-		       active ? "Activate" : "Deactivate",
-		       scd_retry ? "BA" : "AC", txq_id, tx_fifo_id);
-}
-
-static const s8 default_queue_to_tx_fifo[] = {
-	IWL_TX_FIFO_VO,
-	IWL_TX_FIFO_VI,
-	IWL_TX_FIFO_BE,
-	IWL_TX_FIFO_BK,
-	IWL49_CMD_FIFO_NUM,
-	IWL_TX_FIFO_UNUSED,
-	IWL_TX_FIFO_UNUSED,
-};
-
-static int iwl4965_alive_notify(struct iwl_priv *priv)
-{
-	u32 a;
-	unsigned long flags;
-	int i, chan;
-	u32 reg_val;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	/* Clear 4965's internal Tx Scheduler data base */
-	priv->scd_base_addr = iwl_read_prph(priv, IWL49_SCD_SRAM_BASE_ADDR);
-	a = priv->scd_base_addr + IWL49_SCD_CONTEXT_DATA_OFFSET;
-	for (; a < priv->scd_base_addr + IWL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4)
-		iwl_write_targ_mem(priv, a, 0);
-	for (; a < priv->scd_base_addr + IWL49_SCD_TRANSLATE_TBL_OFFSET; a += 4)
-		iwl_write_targ_mem(priv, a, 0);
-	for (; a < priv->scd_base_addr +
-	       IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(priv->hw_params.max_txq_num); a += 4)
-		iwl_write_targ_mem(priv, a, 0);
-
-	/* Tel 4965 where to find Tx byte count tables */
-	iwl_write_prph(priv, IWL49_SCD_DRAM_BASE_ADDR,
-			priv->scd_bc_tbls.dma >> 10);
-
-	/* Enable DMA channel */
-	for (chan = 0; chan < FH49_TCSR_CHNL_NUM ; chan++)
-		iwl_write_direct32(priv, FH_TCSR_CHNL_TX_CONFIG_REG(chan),
-				FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
-				FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE);
-
-	/* Update FH chicken bits */
-	reg_val = iwl_read_direct32(priv, FH_TX_CHICKEN_BITS_REG);
-	iwl_write_direct32(priv, FH_TX_CHICKEN_BITS_REG,
-			   reg_val | FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN);
-
-	/* Disable chain mode for all queues */
-	iwl_write_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, 0);
-
-	/* Initialize each Tx queue (including the command queue) */
-	for (i = 0; i < priv->hw_params.max_txq_num; i++) {
-
-		/* TFD circular buffer read/write indexes */
-		iwl_write_prph(priv, IWL49_SCD_QUEUE_RDPTR(i), 0);
-		iwl_write_direct32(priv, HBUS_TARG_WRPTR, 0 | (i << 8));
-
-		/* Max Tx Window size for Scheduler-ACK mode */
-		iwl_write_targ_mem(priv, priv->scd_base_addr +
-				IWL49_SCD_CONTEXT_QUEUE_OFFSET(i),
-				(SCD_WIN_SIZE <<
-				IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
-				IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
-
-		/* Frame limit */
-		iwl_write_targ_mem(priv, priv->scd_base_addr +
-				IWL49_SCD_CONTEXT_QUEUE_OFFSET(i) +
-				sizeof(u32),
-				(SCD_FRAME_LIMIT <<
-				IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
-				IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
-
-	}
-	iwl_write_prph(priv, IWL49_SCD_INTERRUPT_MASK,
-				 (1 << priv->hw_params.max_txq_num) - 1);
-
-	/* Activate all Tx DMA/FIFO channels */
-	priv->cfg->ops->lib->txq_set_sched(priv, IWL_MASK(0, 6));
-
-	iwl4965_set_wr_ptrs(priv, IWL_DEFAULT_CMD_QUEUE_NUM, 0);
-
-	/* make sure all queue are not stopped */
-	memset(&priv->queue_stopped[0], 0, sizeof(priv->queue_stopped));
-	for (i = 0; i < 4; i++)
-		atomic_set(&priv->queue_stop_count[i], 0);
-
-	/* reset to 0 to enable all the queue first */
-	priv->txq_ctx_active_msk = 0;
-	/* Map each Tx/cmd queue to its corresponding fifo */
-	BUILD_BUG_ON(ARRAY_SIZE(default_queue_to_tx_fifo) != 7);
-
-	for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) {
-		int ac = default_queue_to_tx_fifo[i];
-
-		iwl_txq_ctx_activate(priv, i);
-
-		if (ac == IWL_TX_FIFO_UNUSED)
-			continue;
-
-		iwl4965_tx_queue_set_status(priv, &priv->txq[i], ac, 0);
-	}
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	return 0;
-}
-
-static struct iwl_sensitivity_ranges iwl4965_sensitivity = {
-	.min_nrg_cck = 97,
-	.max_nrg_cck = 0, /* not used, set to 0 */
-
-	.auto_corr_min_ofdm = 85,
-	.auto_corr_min_ofdm_mrc = 170,
-	.auto_corr_min_ofdm_x1 = 105,
-	.auto_corr_min_ofdm_mrc_x1 = 220,
-
-	.auto_corr_max_ofdm = 120,
-	.auto_corr_max_ofdm_mrc = 210,
-	.auto_corr_max_ofdm_x1 = 140,
-	.auto_corr_max_ofdm_mrc_x1 = 270,
-
-	.auto_corr_min_cck = 125,
-	.auto_corr_max_cck = 200,
-	.auto_corr_min_cck_mrc = 200,
-	.auto_corr_max_cck_mrc = 400,
-
-	.nrg_th_cck = 100,
-	.nrg_th_ofdm = 100,
-
-	.barker_corr_th_min = 190,
-	.barker_corr_th_min_mrc = 390,
-	.nrg_th_cca = 62,
-};
-
-static void iwl4965_set_ct_threshold(struct iwl_priv *priv)
-{
-	/* want Kelvin */
-	priv->hw_params.ct_kill_threshold =
-		CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY);
-}
-
-/**
- * iwl4965_hw_set_hw_params
- *
- * Called when initializing driver
- */
-static int iwl4965_hw_set_hw_params(struct iwl_priv *priv)
-{
-	if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
-	    priv->cfg->mod_params->num_of_queues <= IWL49_NUM_QUEUES)
-		priv->cfg->base_params->num_of_queues =
-			priv->cfg->mod_params->num_of_queues;
-
-	priv->hw_params.max_txq_num = priv->cfg->base_params->num_of_queues;
-	priv->hw_params.dma_chnl_num = FH49_TCSR_CHNL_NUM;
-	priv->hw_params.scd_bc_tbls_size =
-			priv->cfg->base_params->num_of_queues *
-			sizeof(struct iwl4965_scd_bc_tbl);
-	priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
-	priv->hw_params.max_stations = IWL4965_STATION_COUNT;
-	priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWL4965_BROADCAST_ID;
-	priv->hw_params.max_data_size = IWL49_RTC_DATA_SIZE;
-	priv->hw_params.max_inst_size = IWL49_RTC_INST_SIZE;
-	priv->hw_params.max_bsm_size = BSM_SRAM_SIZE;
-	priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_5GHZ);
-
-	priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
-
-	priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
-	priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
-	priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
-	priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
-
-	iwl4965_set_ct_threshold(priv);
-
-	priv->hw_params.sens = &iwl4965_sensitivity;
-	priv->hw_params.beacon_time_tsf_bits = IWLAGN_EXT_BEACON_TIME_POS;
-
-	return 0;
-}
-
-static s32 iwl4965_math_div_round(s32 num, s32 denom, s32 *res)
-{
-	s32 sign = 1;
-
-	if (num < 0) {
-		sign = -sign;
-		num = -num;
-	}
-	if (denom < 0) {
-		sign = -sign;
-		denom = -denom;
-	}
-	*res = 1;
-	*res = ((num * 2 + denom) / (denom * 2)) * sign;
-
-	return 1;
-}
-
-/**
- * iwl4965_get_voltage_compensation - Power supply voltage comp for txpower
- *
- * Determines power supply voltage compensation for txpower calculations.
- * Returns number of 1/2-dB steps to subtract from gain table index,
- * to compensate for difference between power supply voltage during
- * factory measurements, vs. current power supply voltage.
- *
- * Voltage indication is higher for lower voltage.
- * Lower voltage requires more gain (lower gain table index).
- */
-static s32 iwl4965_get_voltage_compensation(s32 eeprom_voltage,
-					    s32 current_voltage)
-{
-	s32 comp = 0;
-
-	if ((TX_POWER_IWL_ILLEGAL_VOLTAGE == eeprom_voltage) ||
-	    (TX_POWER_IWL_ILLEGAL_VOLTAGE == current_voltage))
-		return 0;
-
-	iwl4965_math_div_round(current_voltage - eeprom_voltage,
-			       TX_POWER_IWL_VOLTAGE_CODES_PER_03V, &comp);
-
-	if (current_voltage > eeprom_voltage)
-		comp *= 2;
-	if ((comp < -2) || (comp > 2))
-		comp = 0;
-
-	return comp;
-}
-
-static s32 iwl4965_get_tx_atten_grp(u16 channel)
-{
-	if (channel >= CALIB_IWL_TX_ATTEN_GR5_FCH &&
-	    channel <= CALIB_IWL_TX_ATTEN_GR5_LCH)
-		return CALIB_CH_GROUP_5;
-
-	if (channel >= CALIB_IWL_TX_ATTEN_GR1_FCH &&
-	    channel <= CALIB_IWL_TX_ATTEN_GR1_LCH)
-		return CALIB_CH_GROUP_1;
-
-	if (channel >= CALIB_IWL_TX_ATTEN_GR2_FCH &&
-	    channel <= CALIB_IWL_TX_ATTEN_GR2_LCH)
-		return CALIB_CH_GROUP_2;
-
-	if (channel >= CALIB_IWL_TX_ATTEN_GR3_FCH &&
-	    channel <= CALIB_IWL_TX_ATTEN_GR3_LCH)
-		return CALIB_CH_GROUP_3;
-
-	if (channel >= CALIB_IWL_TX_ATTEN_GR4_FCH &&
-	    channel <= CALIB_IWL_TX_ATTEN_GR4_LCH)
-		return CALIB_CH_GROUP_4;
-
-	return -1;
-}
-
-static u32 iwl4965_get_sub_band(const struct iwl_priv *priv, u32 channel)
-{
-	s32 b = -1;
-
-	for (b = 0; b < EEPROM_TX_POWER_BANDS; b++) {
-		if (priv->calib_info->band_info[b].ch_from == 0)
-			continue;
-
-		if ((channel >= priv->calib_info->band_info[b].ch_from)
-		    && (channel <= priv->calib_info->band_info[b].ch_to))
-			break;
-	}
-
-	return b;
-}
-
-static s32 iwl4965_interpolate_value(s32 x, s32 x1, s32 y1, s32 x2, s32 y2)
-{
-	s32 val;
-
-	if (x2 == x1)
-		return y1;
-	else {
-		iwl4965_math_div_round((x2 - x) * (y1 - y2), (x2 - x1), &val);
-		return val + y2;
-	}
-}
-
-/**
- * iwl4965_interpolate_chan - Interpolate factory measurements for one channel
- *
- * Interpolates factory measurements from the two sample channels within a
- * sub-band, to apply to channel of interest.  Interpolation is proportional to
- * differences in channel frequencies, which is proportional to differences
- * in channel number.
- */
-static int iwl4965_interpolate_chan(struct iwl_priv *priv, u32 channel,
-				    struct iwl_eeprom_calib_ch_info *chan_info)
-{
-	s32 s = -1;
-	u32 c;
-	u32 m;
-	const struct iwl_eeprom_calib_measure *m1;
-	const struct iwl_eeprom_calib_measure *m2;
-	struct iwl_eeprom_calib_measure *omeas;
-	u32 ch_i1;
-	u32 ch_i2;
-
-	s = iwl4965_get_sub_band(priv, channel);
-	if (s >= EEPROM_TX_POWER_BANDS) {
-		IWL_ERR(priv, "Tx Power can not find channel %d\n", channel);
-		return -1;
-	}
-
-	ch_i1 = priv->calib_info->band_info[s].ch1.ch_num;
-	ch_i2 = priv->calib_info->band_info[s].ch2.ch_num;
-	chan_info->ch_num = (u8) channel;
-
-	IWL_DEBUG_TXPOWER(priv, "channel %d subband %d factory cal ch %d & %d\n",
-			  channel, s, ch_i1, ch_i2);
-
-	for (c = 0; c < EEPROM_TX_POWER_TX_CHAINS; c++) {
-		for (m = 0; m < EEPROM_TX_POWER_MEASUREMENTS; m++) {
-			m1 = &(priv->calib_info->band_info[s].ch1.
-			       measurements[c][m]);
-			m2 = &(priv->calib_info->band_info[s].ch2.
-			       measurements[c][m]);
-			omeas = &(chan_info->measurements[c][m]);
-
-			omeas->actual_pow =
-			    (u8) iwl4965_interpolate_value(channel, ch_i1,
-							   m1->actual_pow,
-							   ch_i2,
-							   m2->actual_pow);
-			omeas->gain_idx =
-			    (u8) iwl4965_interpolate_value(channel, ch_i1,
-							   m1->gain_idx, ch_i2,
-							   m2->gain_idx);
-			omeas->temperature =
-			    (u8) iwl4965_interpolate_value(channel, ch_i1,
-							   m1->temperature,
-							   ch_i2,
-							   m2->temperature);
-			omeas->pa_det =
-			    (s8) iwl4965_interpolate_value(channel, ch_i1,
-							   m1->pa_det, ch_i2,
-							   m2->pa_det);
-
-			IWL_DEBUG_TXPOWER(priv,
-				"chain %d meas %d AP1=%d AP2=%d AP=%d\n", c, m,
-				m1->actual_pow, m2->actual_pow, omeas->actual_pow);
-			IWL_DEBUG_TXPOWER(priv,
-				"chain %d meas %d NI1=%d NI2=%d NI=%d\n", c, m,
-				m1->gain_idx, m2->gain_idx, omeas->gain_idx);
-			IWL_DEBUG_TXPOWER(priv,
-				"chain %d meas %d PA1=%d PA2=%d PA=%d\n", c, m,
-				m1->pa_det, m2->pa_det, omeas->pa_det);
-			IWL_DEBUG_TXPOWER(priv,
-				"chain %d meas %d  T1=%d  T2=%d  T=%d\n", c, m,
-				m1->temperature, m2->temperature,
-				omeas->temperature);
-		}
-	}
-
-	return 0;
-}
-
-/* bit-rate-dependent table to prevent Tx distortion, in half-dB units,
- * for OFDM 6, 12, 18, 24, 36, 48, 54, 60 MBit, and CCK all rates. */
-static s32 back_off_table[] = {
-	10, 10, 10, 10, 10, 15, 17, 20,	/* OFDM SISO 20 MHz */
-	10, 10, 10, 10, 10, 15, 17, 20,	/* OFDM MIMO 20 MHz */
-	10, 10, 10, 10, 10, 15, 17, 20,	/* OFDM SISO 40 MHz */
-	10, 10, 10, 10, 10, 15, 17, 20,	/* OFDM MIMO 40 MHz */
-	10			/* CCK */
-};
-
-/* Thermal compensation values for txpower for various frequency ranges ...
- *   ratios from 3:1 to 4.5:1 of degrees (Celsius) per half-dB gain adjust */
-static struct iwl4965_txpower_comp_entry {
-	s32 degrees_per_05db_a;
-	s32 degrees_per_05db_a_denom;
-} tx_power_cmp_tble[CALIB_CH_GROUP_MAX] = {
-	{9, 2},			/* group 0 5.2, ch  34-43 */
-	{4, 1},			/* group 1 5.2, ch  44-70 */
-	{4, 1},			/* group 2 5.2, ch  71-124 */
-	{4, 1},			/* group 3 5.2, ch 125-200 */
-	{3, 1}			/* group 4 2.4, ch   all */
-};
-
-static s32 get_min_power_index(s32 rate_power_index, u32 band)
-{
-	if (!band) {
-		if ((rate_power_index & 7) <= 4)
-			return MIN_TX_GAIN_INDEX_52GHZ_EXT;
-	}
-	return MIN_TX_GAIN_INDEX;
-}
-
-struct gain_entry {
-	u8 dsp;
-	u8 radio;
-};
-
-static const struct gain_entry gain_table[2][108] = {
-	/* 5.2GHz power gain index table */
-	{
-	 {123, 0x3F},		/* highest txpower */
-	 {117, 0x3F},
-	 {110, 0x3F},
-	 {104, 0x3F},
-	 {98, 0x3F},
-	 {110, 0x3E},
-	 {104, 0x3E},
-	 {98, 0x3E},
-	 {110, 0x3D},
-	 {104, 0x3D},
-	 {98, 0x3D},
-	 {110, 0x3C},
-	 {104, 0x3C},
-	 {98, 0x3C},
-	 {110, 0x3B},
-	 {104, 0x3B},
-	 {98, 0x3B},
-	 {110, 0x3A},
-	 {104, 0x3A},
-	 {98, 0x3A},
-	 {110, 0x39},
-	 {104, 0x39},
-	 {98, 0x39},
-	 {110, 0x38},
-	 {104, 0x38},
-	 {98, 0x38},
-	 {110, 0x37},
-	 {104, 0x37},
-	 {98, 0x37},
-	 {110, 0x36},
-	 {104, 0x36},
-	 {98, 0x36},
-	 {110, 0x35},
-	 {104, 0x35},
-	 {98, 0x35},
-	 {110, 0x34},
-	 {104, 0x34},
-	 {98, 0x34},
-	 {110, 0x33},
-	 {104, 0x33},
-	 {98, 0x33},
-	 {110, 0x32},
-	 {104, 0x32},
-	 {98, 0x32},
-	 {110, 0x31},
-	 {104, 0x31},
-	 {98, 0x31},
-	 {110, 0x30},
-	 {104, 0x30},
-	 {98, 0x30},
-	 {110, 0x25},
-	 {104, 0x25},
-	 {98, 0x25},
-	 {110, 0x24},
-	 {104, 0x24},
-	 {98, 0x24},
-	 {110, 0x23},
-	 {104, 0x23},
-	 {98, 0x23},
-	 {110, 0x22},
-	 {104, 0x18},
-	 {98, 0x18},
-	 {110, 0x17},
-	 {104, 0x17},
-	 {98, 0x17},
-	 {110, 0x16},
-	 {104, 0x16},
-	 {98, 0x16},
-	 {110, 0x15},
-	 {104, 0x15},
-	 {98, 0x15},
-	 {110, 0x14},
-	 {104, 0x14},
-	 {98, 0x14},
-	 {110, 0x13},
-	 {104, 0x13},
-	 {98, 0x13},
-	 {110, 0x12},
-	 {104, 0x08},
-	 {98, 0x08},
-	 {110, 0x07},
-	 {104, 0x07},
-	 {98, 0x07},
-	 {110, 0x06},
-	 {104, 0x06},
-	 {98, 0x06},
-	 {110, 0x05},
-	 {104, 0x05},
-	 {98, 0x05},
-	 {110, 0x04},
-	 {104, 0x04},
-	 {98, 0x04},
-	 {110, 0x03},
-	 {104, 0x03},
-	 {98, 0x03},
-	 {110, 0x02},
-	 {104, 0x02},
-	 {98, 0x02},
-	 {110, 0x01},
-	 {104, 0x01},
-	 {98, 0x01},
-	 {110, 0x00},
-	 {104, 0x00},
-	 {98, 0x00},
-	 {93, 0x00},
-	 {88, 0x00},
-	 {83, 0x00},
-	 {78, 0x00},
-	 },
-	/* 2.4GHz power gain index table */
-	{
-	 {110, 0x3f},		/* highest txpower */
-	 {104, 0x3f},
-	 {98, 0x3f},
-	 {110, 0x3e},
-	 {104, 0x3e},
-	 {98, 0x3e},
-	 {110, 0x3d},
-	 {104, 0x3d},
-	 {98, 0x3d},
-	 {110, 0x3c},
-	 {104, 0x3c},
-	 {98, 0x3c},
-	 {110, 0x3b},
-	 {104, 0x3b},
-	 {98, 0x3b},
-	 {110, 0x3a},
-	 {104, 0x3a},
-	 {98, 0x3a},
-	 {110, 0x39},
-	 {104, 0x39},
-	 {98, 0x39},
-	 {110, 0x38},
-	 {104, 0x38},
-	 {98, 0x38},
-	 {110, 0x37},
-	 {104, 0x37},
-	 {98, 0x37},
-	 {110, 0x36},
-	 {104, 0x36},
-	 {98, 0x36},
-	 {110, 0x35},
-	 {104, 0x35},
-	 {98, 0x35},
-	 {110, 0x34},
-	 {104, 0x34},
-	 {98, 0x34},
-	 {110, 0x33},
-	 {104, 0x33},
-	 {98, 0x33},
-	 {110, 0x32},
-	 {104, 0x32},
-	 {98, 0x32},
-	 {110, 0x31},
-	 {104, 0x31},
-	 {98, 0x31},
-	 {110, 0x30},
-	 {104, 0x30},
-	 {98, 0x30},
-	 {110, 0x6},
-	 {104, 0x6},
-	 {98, 0x6},
-	 {110, 0x5},
-	 {104, 0x5},
-	 {98, 0x5},
-	 {110, 0x4},
-	 {104, 0x4},
-	 {98, 0x4},
-	 {110, 0x3},
-	 {104, 0x3},
-	 {98, 0x3},
-	 {110, 0x2},
-	 {104, 0x2},
-	 {98, 0x2},
-	 {110, 0x1},
-	 {104, 0x1},
-	 {98, 0x1},
-	 {110, 0x0},
-	 {104, 0x0},
-	 {98, 0x0},
-	 {97, 0},
-	 {96, 0},
-	 {95, 0},
-	 {94, 0},
-	 {93, 0},
-	 {92, 0},
-	 {91, 0},
-	 {90, 0},
-	 {89, 0},
-	 {88, 0},
-	 {87, 0},
-	 {86, 0},
-	 {85, 0},
-	 {84, 0},
-	 {83, 0},
-	 {82, 0},
-	 {81, 0},
-	 {80, 0},
-	 {79, 0},
-	 {78, 0},
-	 {77, 0},
-	 {76, 0},
-	 {75, 0},
-	 {74, 0},
-	 {73, 0},
-	 {72, 0},
-	 {71, 0},
-	 {70, 0},
-	 {69, 0},
-	 {68, 0},
-	 {67, 0},
-	 {66, 0},
-	 {65, 0},
-	 {64, 0},
-	 {63, 0},
-	 {62, 0},
-	 {61, 0},
-	 {60, 0},
-	 {59, 0},
-	 }
-};
-
-static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel,
-				    u8 is_ht40, u8 ctrl_chan_high,
-				    struct iwl4965_tx_power_db *tx_power_tbl)
-{
-	u8 saturation_power;
-	s32 target_power;
-	s32 user_target_power;
-	s32 power_limit;
-	s32 current_temp;
-	s32 reg_limit;
-	s32 current_regulatory;
-	s32 txatten_grp = CALIB_CH_GROUP_MAX;
-	int i;
-	int c;
-	const struct iwl_channel_info *ch_info = NULL;
-	struct iwl_eeprom_calib_ch_info ch_eeprom_info;
-	const struct iwl_eeprom_calib_measure *measurement;
-	s16 voltage;
-	s32 init_voltage;
-	s32 voltage_compensation;
-	s32 degrees_per_05db_num;
-	s32 degrees_per_05db_denom;
-	s32 factory_temp;
-	s32 temperature_comp[2];
-	s32 factory_gain_index[2];
-	s32 factory_actual_pwr[2];
-	s32 power_index;
-
-	/* tx_power_user_lmt is in dBm, convert to half-dBm (half-dB units
-	 *   are used for indexing into txpower table) */
-	user_target_power = 2 * priv->tx_power_user_lmt;
-
-	/* Get current (RXON) channel, band, width */
-	IWL_DEBUG_TXPOWER(priv, "chan %d band %d is_ht40 %d\n", channel, band,
-			  is_ht40);
-
-	ch_info = iwl_get_channel_info(priv, priv->band, channel);
-
-	if (!is_channel_valid(ch_info))
-		return -EINVAL;
-
-	/* get txatten group, used to select 1) thermal txpower adjustment
-	 *   and 2) mimo txpower balance between Tx chains. */
-	txatten_grp = iwl4965_get_tx_atten_grp(channel);
-	if (txatten_grp < 0) {
-		IWL_ERR(priv, "Can't find txatten group for channel %d.\n",
-			  channel);
-		return -EINVAL;
-	}
-
-	IWL_DEBUG_TXPOWER(priv, "channel %d belongs to txatten group %d\n",
-			  channel, txatten_grp);
-
-	if (is_ht40) {
-		if (ctrl_chan_high)
-			channel -= 2;
-		else
-			channel += 2;
-	}
-
-	/* hardware txpower limits ...
-	 * saturation (clipping distortion) txpowers are in half-dBm */
-	if (band)
-		saturation_power = priv->calib_info->saturation_power24;
-	else
-		saturation_power = priv->calib_info->saturation_power52;
-
-	if (saturation_power < IWL_TX_POWER_SATURATION_MIN ||
-	    saturation_power > IWL_TX_POWER_SATURATION_MAX) {
-		if (band)
-			saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_24;
-		else
-			saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_52;
-	}
-
-	/* regulatory txpower limits ... reg_limit values are in half-dBm,
-	 *   max_power_avg values are in dBm, convert * 2 */
-	if (is_ht40)
-		reg_limit = ch_info->ht40_max_power_avg * 2;
-	else
-		reg_limit = ch_info->max_power_avg * 2;
-
-	if ((reg_limit < IWL_TX_POWER_REGULATORY_MIN) ||
-	    (reg_limit > IWL_TX_POWER_REGULATORY_MAX)) {
-		if (band)
-			reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_24;
-		else
-			reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_52;
-	}
-
-	/* Interpolate txpower calibration values for this channel,
-	 *   based on factory calibration tests on spaced channels. */
-	iwl4965_interpolate_chan(priv, channel, &ch_eeprom_info);
-
-	/* calculate tx gain adjustment based on power supply voltage */
-	voltage = le16_to_cpu(priv->calib_info->voltage);
-	init_voltage = (s32)le32_to_cpu(priv->card_alive_init.voltage);
-	voltage_compensation =
-	    iwl4965_get_voltage_compensation(voltage, init_voltage);
-
-	IWL_DEBUG_TXPOWER(priv, "curr volt %d eeprom volt %d volt comp %d\n",
-			  init_voltage,
-			  voltage, voltage_compensation);
-
-	/* get current temperature (Celsius) */
-	current_temp = max(priv->temperature, IWL_TX_POWER_TEMPERATURE_MIN);
-	current_temp = min(priv->temperature, IWL_TX_POWER_TEMPERATURE_MAX);
-	current_temp = KELVIN_TO_CELSIUS(current_temp);
-
-	/* select thermal txpower adjustment params, based on channel group
-	 *   (same frequency group used for mimo txatten adjustment) */
-	degrees_per_05db_num =
-	    tx_power_cmp_tble[txatten_grp].degrees_per_05db_a;
-	degrees_per_05db_denom =
-	    tx_power_cmp_tble[txatten_grp].degrees_per_05db_a_denom;
-
-	/* get per-chain txpower values from factory measurements */
-	for (c = 0; c < 2; c++) {
-		measurement = &ch_eeprom_info.measurements[c][1];
-
-		/* txgain adjustment (in half-dB steps) based on difference
-		 *   between factory and current temperature */
-		factory_temp = measurement->temperature;
-		iwl4965_math_div_round((current_temp - factory_temp) *
-				       degrees_per_05db_denom,
-				       degrees_per_05db_num,
-				       &temperature_comp[c]);
-
-		factory_gain_index[c] = measurement->gain_idx;
-		factory_actual_pwr[c] = measurement->actual_pow;
-
-		IWL_DEBUG_TXPOWER(priv, "chain = %d\n", c);
-		IWL_DEBUG_TXPOWER(priv, "fctry tmp %d, "
-				  "curr tmp %d, comp %d steps\n",
-				  factory_temp, current_temp,
-				  temperature_comp[c]);
-
-		IWL_DEBUG_TXPOWER(priv, "fctry idx %d, fctry pwr %d\n",
-				  factory_gain_index[c],
-				  factory_actual_pwr[c]);
-	}
-
-	/* for each of 33 bit-rates (including 1 for CCK) */
-	for (i = 0; i < POWER_TABLE_NUM_ENTRIES; i++) {
-		u8 is_mimo_rate;
-		union iwl4965_tx_power_dual_stream tx_power;
-
-		/* for mimo, reduce each chain's txpower by half
-		 * (3dB, 6 steps), so total output power is regulatory
-		 * compliant. */
-		if (i & 0x8) {
-			current_regulatory = reg_limit -
-			    IWL_TX_POWER_MIMO_REGULATORY_COMPENSATION;
-			is_mimo_rate = 1;
-		} else {
-			current_regulatory = reg_limit;
-			is_mimo_rate = 0;
-		}
-
-		/* find txpower limit, either hardware or regulatory */
-		power_limit = saturation_power - back_off_table[i];
-		if (power_limit > current_regulatory)
-			power_limit = current_regulatory;
-
-		/* reduce user's txpower request if necessary
-		 * for this rate on this channel */
-		target_power = user_target_power;
-		if (target_power > power_limit)
-			target_power = power_limit;
-
-		IWL_DEBUG_TXPOWER(priv, "rate %d sat %d reg %d usr %d tgt %d\n",
-				  i, saturation_power - back_off_table[i],
-				  current_regulatory, user_target_power,
-				  target_power);
-
-		/* for each of 2 Tx chains (radio transmitters) */
-		for (c = 0; c < 2; c++) {
-			s32 atten_value;
-
-			if (is_mimo_rate)
-				atten_value =
-				    (s32)le32_to_cpu(priv->card_alive_init.
-				    tx_atten[txatten_grp][c]);
-			else
-				atten_value = 0;
-
-			/* calculate index; higher index means lower txpower */
-			power_index = (u8) (factory_gain_index[c] -
-					    (target_power -
-					     factory_actual_pwr[c]) -
-					    temperature_comp[c] -
-					    voltage_compensation +
-					    atten_value);
-
-/*			IWL_DEBUG_TXPOWER(priv, "calculated txpower index %d\n",
-						power_index); */
-
-			if (power_index < get_min_power_index(i, band))
-				power_index = get_min_power_index(i, band);
-
-			/* adjust 5 GHz index to support negative indexes */
-			if (!band)
-				power_index += 9;
-
-			/* CCK, rate 32, reduce txpower for CCK */
-			if (i == POWER_TABLE_CCK_ENTRY)
-				power_index +=
-				    IWL_TX_POWER_CCK_COMPENSATION_C_STEP;
-
-			/* stay within the table! */
-			if (power_index > 107) {
-				IWL_WARN(priv, "txpower index %d > 107\n",
-					    power_index);
-				power_index = 107;
-			}
-			if (power_index < 0) {
-				IWL_WARN(priv, "txpower index %d < 0\n",
-					    power_index);
-				power_index = 0;
-			}
-
-			/* fill txpower command for this rate/chain */
-			tx_power.s.radio_tx_gain[c] =
-				gain_table[band][power_index].radio;
-			tx_power.s.dsp_predis_atten[c] =
-				gain_table[band][power_index].dsp;
-
-			IWL_DEBUG_TXPOWER(priv, "chain %d mimo %d index %d "
-					  "gain 0x%02x dsp %d\n",
-					  c, atten_value, power_index,
-					tx_power.s.radio_tx_gain[c],
-					tx_power.s.dsp_predis_atten[c]);
-		} /* for each chain */
-
-		tx_power_tbl->power_tbl[i].dw = cpu_to_le32(tx_power.dw);
-
-	} /* for each rate */
-
-	return 0;
-}
-
-/**
- * iwl4965_send_tx_power - Configure the TXPOWER level user limit
- *
- * Uses the active RXON for channel, band, and characteristics (ht40, high)
- * The power limit is taken from priv->tx_power_user_lmt.
- */
-static int iwl4965_send_tx_power(struct iwl_priv *priv)
-{
-	struct iwl4965_txpowertable_cmd cmd = { 0 };
-	int ret;
-	u8 band = 0;
-	bool is_ht40 = false;
-	u8 ctrl_chan_high = 0;
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
-	if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status),
-		      "TX Power requested while scanning!\n"))
-		return -EAGAIN;
-
-	band = priv->band == IEEE80211_BAND_2GHZ;
-
-	is_ht40 = is_ht40_channel(ctx->active.flags);
-
-	if (is_ht40 && (ctx->active.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
-		ctrl_chan_high = 1;
-
-	cmd.band = band;
-	cmd.channel = ctx->active.channel;
-
-	ret = iwl4965_fill_txpower_tbl(priv, band,
-				le16_to_cpu(ctx->active.channel),
-				is_ht40, ctrl_chan_high, &cmd.tx_power);
-	if (ret)
-		goto out;
-
-	ret = iwl_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD, sizeof(cmd), &cmd);
-
-out:
-	return ret;
-}
-
-static int iwl4965_send_rxon_assoc(struct iwl_priv *priv,
-				   struct iwl_rxon_context *ctx)
-{
-	int ret = 0;
-	struct iwl4965_rxon_assoc_cmd rxon_assoc;
-	const struct iwl_rxon_cmd *rxon1 = &ctx->staging;
-	const struct iwl_rxon_cmd *rxon2 = &ctx->active;
-
-	if ((rxon1->flags == rxon2->flags) &&
-	    (rxon1->filter_flags == rxon2->filter_flags) &&
-	    (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
-	    (rxon1->ofdm_ht_single_stream_basic_rates ==
-	     rxon2->ofdm_ht_single_stream_basic_rates) &&
-	    (rxon1->ofdm_ht_dual_stream_basic_rates ==
-	     rxon2->ofdm_ht_dual_stream_basic_rates) &&
-	    (rxon1->rx_chain == rxon2->rx_chain) &&
-	    (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
-		IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC.  Not resending.\n");
-		return 0;
-	}
-
-	rxon_assoc.flags = ctx->staging.flags;
-	rxon_assoc.filter_flags = ctx->staging.filter_flags;
-	rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates;
-	rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates;
-	rxon_assoc.reserved = 0;
-	rxon_assoc.ofdm_ht_single_stream_basic_rates =
-	    ctx->staging.ofdm_ht_single_stream_basic_rates;
-	rxon_assoc.ofdm_ht_dual_stream_basic_rates =
-	    ctx->staging.ofdm_ht_dual_stream_basic_rates;
-	rxon_assoc.rx_chain_select_flags = ctx->staging.rx_chain;
-
-	ret = iwl_send_cmd_pdu_async(priv, REPLY_RXON_ASSOC,
-				     sizeof(rxon_assoc), &rxon_assoc, NULL);
-	if (ret)
-		return ret;
-
-	return ret;
-}
-
-static int iwl4965_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
-{
-	/* cast away the const for active_rxon in this function */
-	struct iwl_rxon_cmd *active_rxon = (void *)&ctx->active;
-	int ret;
-	bool new_assoc =
-		!!(ctx->staging.filter_flags & RXON_FILTER_ASSOC_MSK);
-
-	if (!iwl_is_alive(priv))
-		return -EBUSY;
-
-	if (!ctx->is_active)
-		return 0;
-
-	/* always get timestamp with Rx frame */
-	ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK;
-
-	ret = iwl_check_rxon_cmd(priv, ctx);
-	if (ret) {
-		IWL_ERR(priv, "Invalid RXON configuration.  Not committing.\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * receive commit_rxon request
-	 * abort any previous channel switch if still in process
-	 */
-	if (priv->switch_rxon.switch_in_progress &&
-	    (priv->switch_rxon.channel != ctx->staging.channel)) {
-		IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
-		      le16_to_cpu(priv->switch_rxon.channel));
-		iwl_chswitch_done(priv, false);
-	}
-
-	/* If we don't need to send a full RXON, we can use
-	 * iwl_rxon_assoc_cmd which is used to reconfigure filter
-	 * and other flags for the current radio configuration. */
-	if (!iwl_full_rxon_required(priv, ctx)) {
-		ret = iwl_send_rxon_assoc(priv, ctx);
-		if (ret) {
-			IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret);
-			return ret;
-		}
-
-		memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
-		iwl_print_rx_config_cmd(priv, ctx);
-		return 0;
-	}
-
-	/* If we are currently associated and the new config requires
-	 * an RXON_ASSOC and the new config wants the associated mask enabled,
-	 * we must clear the associated from the active configuration
-	 * before we apply the new config */
-	if (iwl_is_associated_ctx(ctx) && new_assoc) {
-		IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n");
-		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-
-		ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd,
-				       sizeof(struct iwl_rxon_cmd),
-				       active_rxon);
-
-		/* If the mask clearing failed then we set
-		 * active_rxon back to what it was previously */
-		if (ret) {
-			active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
-			IWL_ERR(priv, "Error clearing ASSOC_MSK (%d)\n", ret);
-			return ret;
-		}
-		iwl_clear_ucode_stations(priv, ctx);
-		iwl_restore_stations(priv, ctx);
-		ret = iwl_restore_default_wep_keys(priv, ctx);
-		if (ret) {
-			IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
-			return ret;
-		}
-	}
-
-	IWL_DEBUG_INFO(priv, "Sending RXON\n"
-		       "* with%s RXON_FILTER_ASSOC_MSK\n"
-		       "* channel = %d\n"
-		       "* bssid = %pM\n",
-		       (new_assoc ? "" : "out"),
-		       le16_to_cpu(ctx->staging.channel),
-		       ctx->staging.bssid_addr);
-
-	iwl_set_rxon_hwcrypto(priv, ctx, !priv->cfg->mod_params->sw_crypto);
-
-	/* Apply the new configuration
-	 * RXON unassoc clears the station table in uCode so restoration of
-	 * stations is needed after it (the RXON command) completes
-	 */
-	if (!new_assoc) {
-		ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd,
-			      sizeof(struct iwl_rxon_cmd), &ctx->staging);
-		if (ret) {
-			IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
-			return ret;
-		}
-		IWL_DEBUG_INFO(priv, "Return from !new_assoc RXON.\n");
-		memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
-		iwl_clear_ucode_stations(priv, ctx);
-		iwl_restore_stations(priv, ctx);
-		ret = iwl_restore_default_wep_keys(priv, ctx);
-		if (ret) {
-			IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
-			return ret;
-		}
-	}
-	if (new_assoc) {
-		priv->start_calib = 0;
-		/* Apply the new configuration
-		 * RXON assoc doesn't clear the station table in uCode,
-		 */
-		ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd,
-			      sizeof(struct iwl_rxon_cmd), &ctx->staging);
-		if (ret) {
-			IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
-			return ret;
-		}
-		memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
-	}
-	iwl_print_rx_config_cmd(priv, ctx);
-
-	iwl_init_sensitivity(priv);
-
-	/* If we issue a new RXON command which required a tune then we must
-	 * send a new TXPOWER command or we won't be able to Tx any frames */
-	ret = iwl_set_tx_power(priv, priv->tx_power_next, true);
-	if (ret) {
-		IWL_ERR(priv, "Error sending TX power (%d)\n", ret);
-		return ret;
-	}
-
-	return 0;
-}
-
-static int iwl4965_hw_channel_switch(struct iwl_priv *priv,
-				     struct ieee80211_channel_switch *ch_switch)
-{
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-	int rc;
-	u8 band = 0;
-	bool is_ht40 = false;
-	u8 ctrl_chan_high = 0;
-	struct iwl4965_channel_switch_cmd cmd;
-	const struct iwl_channel_info *ch_info;
-	u32 switch_time_in_usec, ucode_switch_time;
-	u16 ch;
-	u32 tsf_low;
-	u8 switch_count;
-	u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
-	struct ieee80211_vif *vif = ctx->vif;
-	band = priv->band == IEEE80211_BAND_2GHZ;
-
-	is_ht40 = is_ht40_channel(ctx->staging.flags);
-
-	if (is_ht40 &&
-	    (ctx->staging.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
-		ctrl_chan_high = 1;
-
-	cmd.band = band;
-	cmd.expect_beacon = 0;
-	ch = ch_switch->channel->hw_value;
-	cmd.channel = cpu_to_le16(ch);
-	cmd.rxon_flags = ctx->staging.flags;
-	cmd.rxon_filter_flags = ctx->staging.filter_flags;
-	switch_count = ch_switch->count;
-	tsf_low = ch_switch->timestamp & 0x0ffffffff;
-	/*
-	 * calculate the ucode channel switch time
-	 * adding TSF as one of the factor for when to switch
-	 */
-	if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
-		if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
-		    beacon_interval)) {
-			switch_count -= (priv->ucode_beacon_time -
-				tsf_low) / beacon_interval;
-		} else
-			switch_count = 0;
-	}
-	if (switch_count <= 1)
-		cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
-	else {
-		switch_time_in_usec =
-			vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
-		ucode_switch_time = iwl_usecs_to_beacons(priv,
-							 switch_time_in_usec,
-							 beacon_interval);
-		cmd.switch_time = iwl_add_beacon_time(priv,
-						      priv->ucode_beacon_time,
-						      ucode_switch_time,
-						      beacon_interval);
-	}
-	IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
-		      cmd.switch_time);
-	ch_info = iwl_get_channel_info(priv, priv->band, ch);
-	if (ch_info)
-		cmd.expect_beacon = is_channel_radar(ch_info);
-	else {
-		IWL_ERR(priv, "invalid channel switch from %u to %u\n",
-			ctx->active.channel, ch);
-		return -EFAULT;
-	}
-
-	rc = iwl4965_fill_txpower_tbl(priv, band, ch, is_ht40,
-				      ctrl_chan_high, &cmd.tx_power);
-	if (rc) {
-		IWL_DEBUG_11H(priv, "error:%d  fill txpower_tbl\n", rc);
-		return rc;
-	}
-
-	priv->switch_rxon.channel = cmd.channel;
-	priv->switch_rxon.switch_in_progress = true;
-
-	return iwl_send_cmd_pdu(priv, REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd);
-}
-
-/**
- * iwl4965_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array
- */
-static void iwl4965_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
-					    struct iwl_tx_queue *txq,
-					    u16 byte_cnt)
-{
-	struct iwl4965_scd_bc_tbl *scd_bc_tbl = priv->scd_bc_tbls.addr;
-	int txq_id = txq->q.id;
-	int write_ptr = txq->q.write_ptr;
-	int len = byte_cnt + IWL_TX_CRC_SIZE + IWL_TX_DELIMITER_SIZE;
-	__le16 bc_ent;
-
-	WARN_ON(len > 0xFFF || write_ptr >= TFD_QUEUE_SIZE_MAX);
-
-	bc_ent = cpu_to_le16(len & 0xFFF);
-	/* Set up byte count within first 256 entries */
-	scd_bc_tbl[txq_id].tfd_offset[write_ptr] = bc_ent;
-
-	/* If within first 64 entries, duplicate at end */
-	if (write_ptr < TFD_QUEUE_SIZE_BC_DUP)
-		scd_bc_tbl[txq_id].
-			tfd_offset[TFD_QUEUE_SIZE_MAX + write_ptr] = bc_ent;
-}
-
-/**
- * iwl4965_hw_get_temperature - return the calibrated temperature (in Kelvin)
- * @statistics: Provides the temperature reading from the uCode
- *
- * A return of <0 indicates bogus data in the statistics
- */
-static int iwl4965_hw_get_temperature(struct iwl_priv *priv)
-{
-	s32 temperature;
-	s32 vt;
-	s32 R1, R2, R3;
-	u32 R4;
-
-	if (test_bit(STATUS_TEMPERATURE, &priv->status) &&
-	    (priv->_agn.statistics.flag &
-			STATISTICS_REPLY_FLG_HT40_MODE_MSK)) {
-		IWL_DEBUG_TEMP(priv, "Running HT40 temperature calibration\n");
-		R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[1]);
-		R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[1]);
-		R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[1]);
-		R4 = le32_to_cpu(priv->card_alive_init.therm_r4[1]);
-	} else {
-		IWL_DEBUG_TEMP(priv, "Running temperature calibration\n");
-		R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[0]);
-		R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[0]);
-		R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[0]);
-		R4 = le32_to_cpu(priv->card_alive_init.therm_r4[0]);
-	}
-
-	/*
-	 * Temperature is only 23 bits, so sign extend out to 32.
-	 *
-	 * NOTE If we haven't received a statistics notification yet
-	 * with an updated temperature, use R4 provided to us in the
-	 * "initialize" ALIVE response.
-	 */
-	if (!test_bit(STATUS_TEMPERATURE, &priv->status))
-		vt = sign_extend32(R4, 23);
-	else
-		vt = sign_extend32(le32_to_cpu(priv->_agn.statistics.
-				 general.common.temperature), 23);
-
-	IWL_DEBUG_TEMP(priv, "Calib values R[1-3]: %d %d %d R4: %d\n", R1, R2, R3, vt);
-
-	if (R3 == R1) {
-		IWL_ERR(priv, "Calibration conflict R1 == R3\n");
-		return -1;
-	}
-
-	/* Calculate temperature in degrees Kelvin, adjust by 97%.
-	 * Add offset to center the adjustment around 0 degrees Centigrade. */
-	temperature = TEMPERATURE_CALIB_A_VAL * (vt - R2);
-	temperature /= (R3 - R1);
-	temperature = (temperature * 97) / 100 + TEMPERATURE_CALIB_KELVIN_OFFSET;
-
-	IWL_DEBUG_TEMP(priv, "Calibrated temperature: %dK, %dC\n",
-			temperature, KELVIN_TO_CELSIUS(temperature));
-
-	return temperature;
-}
-
-/* Adjust Txpower only if temperature variance is greater than threshold. */
-#define IWL_TEMPERATURE_THRESHOLD   3
-
-/**
- * iwl4965_is_temp_calib_needed - determines if new calibration is needed
- *
- * If the temperature changed has changed sufficiently, then a recalibration
- * is needed.
- *
- * Assumes caller will replace priv->last_temperature once calibration
- * executed.
- */
-static int iwl4965_is_temp_calib_needed(struct iwl_priv *priv)
-{
-	int temp_diff;
-
-	if (!test_bit(STATUS_STATISTICS, &priv->status)) {
-		IWL_DEBUG_TEMP(priv, "Temperature not updated -- no statistics.\n");
-		return 0;
-	}
-
-	temp_diff = priv->temperature - priv->last_temperature;
-
-	/* get absolute value */
-	if (temp_diff < 0) {
-		IWL_DEBUG_POWER(priv, "Getting cooler, delta %d\n", temp_diff);
-		temp_diff = -temp_diff;
-	} else if (temp_diff == 0)
-		IWL_DEBUG_POWER(priv, "Temperature unchanged\n");
-	else
-		IWL_DEBUG_POWER(priv, "Getting warmer, delta %d\n", temp_diff);
-
-	if (temp_diff < IWL_TEMPERATURE_THRESHOLD) {
-		IWL_DEBUG_POWER(priv, " => thermal txpower calib not needed\n");
-		return 0;
-	}
-
-	IWL_DEBUG_POWER(priv, " => thermal txpower calib needed\n");
-
-	return 1;
-}
-
-static void iwl4965_temperature_calib(struct iwl_priv *priv)
-{
-	s32 temp;
-
-	temp = iwl4965_hw_get_temperature(priv);
-	if (temp < 0)
-		return;
-
-	if (priv->temperature != temp) {
-		if (priv->temperature)
-			IWL_DEBUG_TEMP(priv, "Temperature changed "
-				       "from %dC to %dC\n",
-				       KELVIN_TO_CELSIUS(priv->temperature),
-				       KELVIN_TO_CELSIUS(temp));
-		else
-			IWL_DEBUG_TEMP(priv, "Temperature "
-				       "initialized to %dC\n",
-				       KELVIN_TO_CELSIUS(temp));
-	}
-
-	priv->temperature = temp;
-	iwl_tt_handler(priv);
-	set_bit(STATUS_TEMPERATURE, &priv->status);
-
-	if (!priv->disable_tx_power_cal &&
-	     unlikely(!test_bit(STATUS_SCANNING, &priv->status)) &&
-	     iwl4965_is_temp_calib_needed(priv))
-		queue_work(priv->workqueue, &priv->txpower_work);
-}
-
-/**
- * iwl4965_tx_queue_stop_scheduler - Stop queue, but keep configuration
- */
-static void iwl4965_tx_queue_stop_scheduler(struct iwl_priv *priv,
-					    u16 txq_id)
-{
-	/* Simply stop the queue, but don't change any configuration;
-	 * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */
-	iwl_write_prph(priv,
-		IWL49_SCD_QUEUE_STATUS_BITS(txq_id),
-		(0 << IWL49_SCD_QUEUE_STTS_REG_POS_ACTIVE)|
-		(1 << IWL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN));
-}
-
-/**
- * txq_id must be greater than IWL49_FIRST_AMPDU_QUEUE
- * priv->lock must be held by the caller
- */
-static int iwl4965_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
-				   u16 ssn_idx, u8 tx_fifo)
-{
-	if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) ||
-	    (IWL49_FIRST_AMPDU_QUEUE +
-		priv->cfg->base_params->num_of_ampdu_queues <= txq_id)) {
-		IWL_WARN(priv,
-			"queue number out of range: %d, must be %d to %d\n",
-			txq_id, IWL49_FIRST_AMPDU_QUEUE,
-			IWL49_FIRST_AMPDU_QUEUE +
-			priv->cfg->base_params->num_of_ampdu_queues - 1);
-		return -EINVAL;
-	}
-
-	iwl4965_tx_queue_stop_scheduler(priv, txq_id);
-
-	iwl_clear_bits_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
-
-	priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
-	priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
-	/* supposes that ssn_idx is valid (!= 0xFFF) */
-	iwl4965_set_wr_ptrs(priv, txq_id, ssn_idx);
-
-	iwl_clear_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id));
-	iwl_txq_ctx_deactivate(priv, txq_id);
-	iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 0);
-
-	return 0;
-}
-
-/**
- * iwl4965_tx_queue_set_q2ratid - Map unique receiver/tid combination to a queue
- */
-static int iwl4965_tx_queue_set_q2ratid(struct iwl_priv *priv, u16 ra_tid,
-					u16 txq_id)
-{
-	u32 tbl_dw_addr;
-	u32 tbl_dw;
-	u16 scd_q2ratid;
-
-	scd_q2ratid = ra_tid & IWL_SCD_QUEUE_RA_TID_MAP_RATID_MSK;
-
-	tbl_dw_addr = priv->scd_base_addr +
-			IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id);
-
-	tbl_dw = iwl_read_targ_mem(priv, tbl_dw_addr);
-
-	if (txq_id & 0x1)
-		tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF);
-	else
-		tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000);
-
-	iwl_write_targ_mem(priv, tbl_dw_addr, tbl_dw);
-
-	return 0;
-}
-
-
-/**
- * iwl4965_tx_queue_agg_enable - Set up & enable aggregation for selected queue
- *
- * NOTE:  txq_id must be greater than IWL49_FIRST_AMPDU_QUEUE,
- *        i.e. it must be one of the higher queues used for aggregation
- */
-static int iwl4965_txq_agg_enable(struct iwl_priv *priv, int txq_id,
-				  int tx_fifo, int sta_id, int tid, u16 ssn_idx)
-{
-	unsigned long flags;
-	u16 ra_tid;
-	int ret;
-
-	if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) ||
-	    (IWL49_FIRST_AMPDU_QUEUE +
-		priv->cfg->base_params->num_of_ampdu_queues <= txq_id)) {
-		IWL_WARN(priv,
-			"queue number out of range: %d, must be %d to %d\n",
-			txq_id, IWL49_FIRST_AMPDU_QUEUE,
-			IWL49_FIRST_AMPDU_QUEUE +
-			priv->cfg->base_params->num_of_ampdu_queues - 1);
-		return -EINVAL;
-	}
-
-	ra_tid = BUILD_RAxTID(sta_id, tid);
-
-	/* Modify device's station table to Tx this TID */
-	ret = iwl_sta_tx_modify_enable_tid(priv, sta_id, tid);
-	if (ret)
-		return ret;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	/* Stop this Tx queue before configuring it */
-	iwl4965_tx_queue_stop_scheduler(priv, txq_id);
-
-	/* Map receiver-address / traffic-ID to this queue */
-	iwl4965_tx_queue_set_q2ratid(priv, ra_tid, txq_id);
-
-	/* Set this queue as a chain-building queue */
-	iwl_set_bits_prph(priv, IWL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
-
-	/* Place first TFD at index corresponding to start sequence number.
-	 * Assumes that ssn_idx is valid (!= 0xFFF) */
-	priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
-	priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
-	iwl4965_set_wr_ptrs(priv, txq_id, ssn_idx);
-
-	/* Set up Tx window size and frame limit for this queue */
-	iwl_write_targ_mem(priv,
-		priv->scd_base_addr + IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id),
-		(SCD_WIN_SIZE << IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
-		IWL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
-
-	iwl_write_targ_mem(priv, priv->scd_base_addr +
-		IWL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32),
-		(SCD_FRAME_LIMIT << IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS)
-		& IWL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
-
-	iwl_set_bits_prph(priv, IWL49_SCD_INTERRUPT_MASK, (1 << txq_id));
-
-	/* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
-	iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 1);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	return 0;
-}
-
-
-static u16 iwl4965_get_hcmd_size(u8 cmd_id, u16 len)
-{
-	switch (cmd_id) {
-	case REPLY_RXON:
-		return (u16) sizeof(struct iwl4965_rxon_cmd);
-	default:
-		return len;
-	}
-}
-
-static u16 iwl4965_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
-{
-	struct iwl4965_addsta_cmd *addsta = (struct iwl4965_addsta_cmd *)data;
-	addsta->mode = cmd->mode;
-	memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
-	memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo));
-	addsta->station_flags = cmd->station_flags;
-	addsta->station_flags_msk = cmd->station_flags_msk;
-	addsta->tid_disable_tx = cmd->tid_disable_tx;
-	addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
-	addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
-	addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
-	addsta->sleep_tx_count = cmd->sleep_tx_count;
-	addsta->reserved1 = cpu_to_le16(0);
-	addsta->reserved2 = cpu_to_le16(0);
-
-	return (u16)sizeof(struct iwl4965_addsta_cmd);
-}
-
-static inline u32 iwl4965_get_scd_ssn(struct iwl4965_tx_resp *tx_resp)
-{
-	return le32_to_cpup(&tx_resp->u.status + tx_resp->frame_count) & MAX_SN;
-}
-
-/**
- * iwl4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue
- */
-static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv,
-				      struct iwl_ht_agg *agg,
-				      struct iwl4965_tx_resp *tx_resp,
-				      int txq_id, u16 start_idx)
-{
-	u16 status;
-	struct agg_tx_status *frame_status = tx_resp->u.agg_status;
-	struct ieee80211_tx_info *info = NULL;
-	struct ieee80211_hdr *hdr = NULL;
-	u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags);
-	int i, sh, idx;
-	u16 seq;
-	if (agg->wait_for_ba)
-		IWL_DEBUG_TX_REPLY(priv, "got tx response w/o block-ack\n");
-
-	agg->frame_count = tx_resp->frame_count;
-	agg->start_idx = start_idx;
-	agg->rate_n_flags = rate_n_flags;
-	agg->bitmap = 0;
-
-	/* num frames attempted by Tx command */
-	if (agg->frame_count == 1) {
-		/* Only one frame was attempted; no block-ack will arrive */
-		status = le16_to_cpu(frame_status[0].status);
-		idx = start_idx;
-
-		/* FIXME: code repetition */
-		IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, StartIdx=%d idx=%d\n",
-				   agg->frame_count, agg->start_idx, idx);
-
-		info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb);
-		info->status.rates[0].count = tx_resp->failure_frame + 1;
-		info->flags &= ~IEEE80211_TX_CTL_AMPDU;
-		info->flags |= iwl_tx_status_to_mac80211(status);
-		iwlagn_hwrate_to_tx_control(priv, rate_n_flags, info);
-		/* FIXME: code repetition end */
-
-		IWL_DEBUG_TX_REPLY(priv, "1 Frame 0x%x failure :%d\n",
-				    status & 0xff, tx_resp->failure_frame);
-		IWL_DEBUG_TX_REPLY(priv, "Rate Info rate_n_flags=%x\n", rate_n_flags);
-
-		agg->wait_for_ba = 0;
-	} else {
-		/* Two or more frames were attempted; expect block-ack */
-		u64 bitmap = 0;
-		int start = agg->start_idx;
-
-		/* Construct bit-map of pending frames within Tx window */
-		for (i = 0; i < agg->frame_count; i++) {
-			u16 sc;
-			status = le16_to_cpu(frame_status[i].status);
-			seq  = le16_to_cpu(frame_status[i].sequence);
-			idx = SEQ_TO_INDEX(seq);
-			txq_id = SEQ_TO_QUEUE(seq);
-
-			if (status & (AGG_TX_STATE_FEW_BYTES_MSK |
-				      AGG_TX_STATE_ABORT_MSK))
-				continue;
-
-			IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, txq_id=%d idx=%d\n",
-					   agg->frame_count, txq_id, idx);
-
-			hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx);
-			if (!hdr) {
-				IWL_ERR(priv,
-					"BUG_ON idx doesn't point to valid skb"
-					" idx=%d, txq_id=%d\n", idx, txq_id);
-				return -1;
-			}
-
-			sc = le16_to_cpu(hdr->seq_ctrl);
-			if (idx != (SEQ_TO_SN(sc) & 0xff)) {
-				IWL_ERR(priv,
-					"BUG_ON idx doesn't match seq control"
-					" idx=%d, seq_idx=%d, seq=%d\n",
-					idx, SEQ_TO_SN(sc), hdr->seq_ctrl);
-				return -1;
-			}
-
-			IWL_DEBUG_TX_REPLY(priv, "AGG Frame i=%d idx %d seq=%d\n",
-					   i, idx, SEQ_TO_SN(sc));
-
-			sh = idx - start;
-			if (sh > 64) {
-				sh = (start - idx) + 0xff;
-				bitmap = bitmap << sh;
-				sh = 0;
-				start = idx;
-			} else if (sh < -64)
-				sh  = 0xff - (start - idx);
-			else if (sh < 0) {
-				sh = start - idx;
-				start = idx;
-				bitmap = bitmap << sh;
-				sh = 0;
-			}
-			bitmap |= 1ULL << sh;
-			IWL_DEBUG_TX_REPLY(priv, "start=%d bitmap=0x%llx\n",
-					   start, (unsigned long long)bitmap);
-		}
-
-		agg->bitmap = bitmap;
-		agg->start_idx = start;
-		IWL_DEBUG_TX_REPLY(priv, "Frames %d start_idx=%d bitmap=0x%llx\n",
-				   agg->frame_count, agg->start_idx,
-				   (unsigned long long)agg->bitmap);
-
-		if (bitmap)
-			agg->wait_for_ba = 1;
-	}
-	return 0;
-}
-
-static u8 iwl_find_station(struct iwl_priv *priv, const u8 *addr)
-{
-	int i;
-	int start = 0;
-	int ret = IWL_INVALID_STATION;
-	unsigned long flags;
-
-	if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) ||
-	    (priv->iw_mode == NL80211_IFTYPE_AP))
-		start = IWL_STA_ID;
-
-	if (is_broadcast_ether_addr(addr))
-		return priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id;
-
-	spin_lock_irqsave(&priv->sta_lock, flags);
-	for (i = start; i < priv->hw_params.max_stations; i++)
-		if (priv->stations[i].used &&
-		    (!compare_ether_addr(priv->stations[i].sta.sta.addr,
-					 addr))) {
-			ret = i;
-			goto out;
-		}
-
-	IWL_DEBUG_ASSOC_LIMIT(priv, "can not find STA %pM total %d\n",
-			      addr, priv->num_stations);
-
- out:
-	/*
-	 * It may be possible that more commands interacting with stations
-	 * arrive before we completed processing the adding of
-	 * station
-	 */
-	if (ret != IWL_INVALID_STATION &&
-	    (!(priv->stations[ret].used & IWL_STA_UCODE_ACTIVE) ||
-	     ((priv->stations[ret].used & IWL_STA_UCODE_ACTIVE) &&
-	      (priv->stations[ret].used & IWL_STA_UCODE_INPROGRESS)))) {
-		IWL_ERR(priv, "Requested station info for sta %d before ready.\n",
-			ret);
-		ret = IWL_INVALID_STATION;
-	}
-	spin_unlock_irqrestore(&priv->sta_lock, flags);
-	return ret;
-}
-
-static int iwl_get_ra_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr)
-{
-	if (priv->iw_mode == NL80211_IFTYPE_STATION) {
-		return IWL_AP_ID;
-	} else {
-		u8 *da = ieee80211_get_DA(hdr);
-		return iwl_find_station(priv, da);
-	}
-}
-
-/**
- * iwl4965_rx_reply_tx - Handle standard (non-aggregation) Tx response
- */
-static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
-				struct iwl_rx_mem_buffer *rxb)
-{
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-	u16 sequence = le16_to_cpu(pkt->hdr.sequence);
-	int txq_id = SEQ_TO_QUEUE(sequence);
-	int index = SEQ_TO_INDEX(sequence);
-	struct iwl_tx_queue *txq = &priv->txq[txq_id];
-	struct ieee80211_hdr *hdr;
-	struct ieee80211_tx_info *info;
-	struct iwl4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
-	u32  status = le32_to_cpu(tx_resp->u.status);
-	int uninitialized_var(tid);
-	int sta_id;
-	int freed;
-	u8 *qc = NULL;
-	unsigned long flags;
-
-	if ((index >= txq->q.n_bd) || (iwl_queue_used(&txq->q, index) == 0)) {
-		IWL_ERR(priv, "Read index for DMA queue txq_id (%d) index %d "
-			  "is out of range [0-%d] %d %d\n", txq_id,
-			  index, txq->q.n_bd, txq->q.write_ptr,
-			  txq->q.read_ptr);
-		return;
-	}
-
-	txq->time_stamp = jiffies;
-	info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb);
-	memset(&info->status, 0, sizeof(info->status));
-
-	hdr = iwl_tx_queue_get_hdr(priv, txq_id, index);
-	if (ieee80211_is_data_qos(hdr->frame_control)) {
-		qc = ieee80211_get_qos_ctl(hdr);
-		tid = qc[0] & 0xf;
-	}
-
-	sta_id = iwl_get_ra_sta_id(priv, hdr);
-	if (txq->sched_retry && unlikely(sta_id == IWL_INVALID_STATION)) {
-		IWL_ERR(priv, "Station not known\n");
-		return;
-	}
-
-	spin_lock_irqsave(&priv->sta_lock, flags);
-	if (txq->sched_retry) {
-		const u32 scd_ssn = iwl4965_get_scd_ssn(tx_resp);
-		struct iwl_ht_agg *agg = NULL;
-		WARN_ON(!qc);
-
-		agg = &priv->stations[sta_id].tid[tid].agg;
-
-		iwl4965_tx_status_reply_tx(priv, agg, tx_resp, txq_id, index);
-
-		/* check if BAR is needed */
-		if ((tx_resp->frame_count == 1) && !iwl_is_tx_success(status))
-			info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
-
-		if (txq->q.read_ptr != (scd_ssn & 0xff)) {
-			index = iwl_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd);
-			IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim scd_ssn "
-					   "%d index %d\n", scd_ssn , index);
-			freed = iwlagn_tx_queue_reclaim(priv, txq_id, index);
-			if (qc)
-				iwl_free_tfds_in_queue(priv, sta_id,
-						       tid, freed);
-
-			if (priv->mac80211_registered &&
-			    (iwl_queue_space(&txq->q) > txq->q.low_mark) &&
-			    (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA))
-				iwl_wake_queue(priv, txq);
-		}
-	} else {
-		info->status.rates[0].count = tx_resp->failure_frame + 1;
-		info->flags |= iwl_tx_status_to_mac80211(status);
-		iwlagn_hwrate_to_tx_control(priv,
-					le32_to_cpu(tx_resp->rate_n_flags),
-					info);
-
-		IWL_DEBUG_TX_REPLY(priv, "TXQ %d status %s (0x%08x) "
-				   "rate_n_flags 0x%x retries %d\n",
-				   txq_id,
-				   iwl_get_tx_fail_reason(status), status,
-				   le32_to_cpu(tx_resp->rate_n_flags),
-				   tx_resp->failure_frame);
-
-		freed = iwlagn_tx_queue_reclaim(priv, txq_id, index);
-		if (qc && likely(sta_id != IWL_INVALID_STATION))
-			iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
-		else if (sta_id == IWL_INVALID_STATION)
-			IWL_DEBUG_TX_REPLY(priv, "Station not known\n");
-
-		if (priv->mac80211_registered &&
-		    (iwl_queue_space(&txq->q) > txq->q.low_mark))
-			iwl_wake_queue(priv, txq);
-	}
-	if (qc && likely(sta_id != IWL_INVALID_STATION))
-		iwlagn_txq_check_empty(priv, sta_id, tid, txq_id);
-
-	iwl_check_abort_status(priv, tx_resp->frame_count, status);
-
-	spin_unlock_irqrestore(&priv->sta_lock, flags);
-}
-
-static void iwl4965_rx_beacon_notif(struct iwl_priv *priv,
-				    struct iwl_rx_mem_buffer *rxb)
-{
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-	struct iwl4965_beacon_notif *beacon = (void *)pkt->u.raw;
-#ifdef CONFIG_IWLWIFI_DEBUG
-	u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
-
-	IWL_DEBUG_RX(priv, "beacon status %#x, retries:%d ibssmgr:%d "
-		"tsf:0x%.8x%.8x rate:%d\n",
-		le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
-		beacon->beacon_notify_hdr.failure_frame,
-		le32_to_cpu(beacon->ibss_mgr_status),
-		le32_to_cpu(beacon->high_tsf),
-		le32_to_cpu(beacon->low_tsf), rate);
-#endif
-
-	priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
-
-	if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
-		queue_work(priv->workqueue, &priv->beacon_update);
-}
-
-static int iwl4965_calc_rssi(struct iwl_priv *priv,
-			     struct iwl_rx_phy_res *rx_resp)
-{
-	/* data from PHY/DSP regarding signal strength, etc.,
-	 *   contents are always there, not configurable by host.  */
-	struct iwl4965_rx_non_cfg_phy *ncphy =
-	    (struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf;
-	u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL49_AGC_DB_MASK)
-			>> IWL49_AGC_DB_POS;
-
-	u32 valid_antennae =
-	    (le16_to_cpu(rx_resp->phy_flags) & IWL49_RX_PHY_FLAGS_ANTENNAE_MASK)
-			>> IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET;
-	u8 max_rssi = 0;
-	u32 i;
-
-	/* Find max rssi among 3 possible receivers.
-	 * These values are measured by the digital signal processor (DSP).
-	 * They should stay fairly constant even as the signal strength varies,
-	 *   if the radio's automatic gain control (AGC) is working right.
-	 * AGC value (see below) will provide the "interesting" info. */
-	for (i = 0; i < 3; i++)
-		if (valid_antennae & (1 << i))
-			max_rssi = max(ncphy->rssi_info[i << 1], max_rssi);
-
-	IWL_DEBUG_STATS(priv, "Rssi In A %d B %d C %d Max %d AGC dB %d\n",
-		ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4],
-		max_rssi, agc);
-
-	/* dBm = max_rssi dB - agc dB - constant.
-	 * Higher AGC (higher radio gain) means lower signal. */
-	return max_rssi - agc - IWLAGN_RSSI_OFFSET;
-}
-
-
-/* Set up 4965-specific Rx frame reply handlers */
-static void iwl4965_rx_handler_setup(struct iwl_priv *priv)
-{
-	/* Legacy Rx frames */
-	priv->rx_handlers[REPLY_RX] = iwlagn_rx_reply_rx;
-	/* Tx response */
-	priv->rx_handlers[REPLY_TX] = iwl4965_rx_reply_tx;
-	priv->rx_handlers[BEACON_NOTIFICATION] = iwl4965_rx_beacon_notif;
-
-	/* set up notification wait support */
-	spin_lock_init(&priv->_agn.notif_wait_lock);
-	INIT_LIST_HEAD(&priv->_agn.notif_waits);
-	init_waitqueue_head(&priv->_agn.notif_waitq);
-}
-
-static void iwl4965_setup_deferred_work(struct iwl_priv *priv)
-{
-	INIT_WORK(&priv->txpower_work, iwl4965_bg_txpower_work);
-}
-
-static void iwl4965_cancel_deferred_work(struct iwl_priv *priv)
-{
-	cancel_work_sync(&priv->txpower_work);
-}
-
-static struct iwl_hcmd_ops iwl4965_hcmd = {
-	.rxon_assoc = iwl4965_send_rxon_assoc,
-	.commit_rxon = iwl4965_commit_rxon,
-	.set_rxon_chain = iwlagn_set_rxon_chain,
-	.send_bt_config = iwl_send_bt_config,
-};
-
-static void iwl4965_post_scan(struct iwl_priv *priv)
-{
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
-	/*
-	 * Since setting the RXON may have been deferred while
-	 * performing the scan, fire one off if needed
-	 */
-	if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
-		iwlcore_commit_rxon(priv, ctx);
-}
-
-static void iwl4965_post_associate(struct iwl_priv *priv)
-{
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-	struct ieee80211_vif *vif = ctx->vif;
-	struct ieee80211_conf *conf = NULL;
-	int ret = 0;
-
-	if (!vif || !priv->is_open)
-		return;
-
-	if (vif->type == NL80211_IFTYPE_AP) {
-		IWL_ERR(priv, "%s Should not be called in AP mode\n", __func__);
-		return;
-	}
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	iwl_scan_cancel_timeout(priv, 200);
-
-	conf = ieee80211_get_hw_conf(priv->hw);
-
-	ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-	iwlcore_commit_rxon(priv, ctx);
-
-	ret = iwl_send_rxon_timing(priv, ctx);
-	if (ret)
-		IWL_WARN(priv, "RXON timing - "
-			    "Attempting to continue.\n");
-
-	ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
-
-	iwl_set_rxon_ht(priv, &priv->current_ht_config);
-
-	if (priv->cfg->ops->hcmd->set_rxon_chain)
-		priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
-
-	ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid);
-
-	IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n",
-			vif->bss_conf.aid, vif->bss_conf.beacon_int);
-
-	if (vif->bss_conf.use_short_preamble)
-		ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
-	else
-		ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
-
-	if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
-		if (vif->bss_conf.use_short_slot)
-			ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
-		else
-			ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
-	}
-
-	iwlcore_commit_rxon(priv, ctx);
-
-	IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n",
-			vif->bss_conf.aid, ctx->active.bssid_addr);
-
-	switch (vif->type) {
-	case NL80211_IFTYPE_STATION:
-		break;
-	case NL80211_IFTYPE_ADHOC:
-		iwlagn_send_beacon_cmd(priv);
-		break;
-	default:
-		IWL_ERR(priv, "%s Should not be called in %d mode\n",
-			  __func__, vif->type);
-		break;
-	}
-
-	/* the chain noise calibration will enabled PM upon completion
-	 * If chain noise has already been run, then we need to enable
-	 * power management here */
-	if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE)
-		iwl_power_update_mode(priv, false);
-
-	/* Enable Rx differential gain and sensitivity calibrations */
-	iwl_chain_noise_reset(priv);
-	priv->start_calib = 1;
-}
-
-static void iwl4965_config_ap(struct iwl_priv *priv)
-{
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-	struct ieee80211_vif *vif = ctx->vif;
-	int ret = 0;
-
-	lockdep_assert_held(&priv->mutex);
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	/* The following should be done only at AP bring up */
-	if (!iwl_is_associated_ctx(ctx)) {
-
-		/* RXON - unassoc (to set timing command) */
-		ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwlcore_commit_rxon(priv, ctx);
-
-		/* RXON Timing */
-		ret = iwl_send_rxon_timing(priv, ctx);
-		if (ret)
-			IWL_WARN(priv, "RXON timing failed - "
-					"Attempting to continue.\n");
-
-		/* AP has all antennas */
-		priv->chain_noise_data.active_chains =
-			priv->hw_params.valid_rx_ant;
-		iwl_set_rxon_ht(priv, &priv->current_ht_config);
-		if (priv->cfg->ops->hcmd->set_rxon_chain)
-			priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
-
-		ctx->staging.assoc_id = 0;
-
-		if (vif->bss_conf.use_short_preamble)
-			ctx->staging.flags |=
-				RXON_FLG_SHORT_PREAMBLE_MSK;
-		else
-			ctx->staging.flags &=
-				~RXON_FLG_SHORT_PREAMBLE_MSK;
-
-		if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
-			if (vif->bss_conf.use_short_slot)
-				ctx->staging.flags |=
-					RXON_FLG_SHORT_SLOT_MSK;
-			else
-				ctx->staging.flags &=
-					~RXON_FLG_SHORT_SLOT_MSK;
-		}
-		/* need to send beacon cmd before committing assoc RXON! */
-		iwlagn_send_beacon_cmd(priv);
-		/* restore RXON assoc */
-		ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
-		iwlcore_commit_rxon(priv, ctx);
-	}
-	iwlagn_send_beacon_cmd(priv);
-
-	/* FIXME - we need to add code here to detect a totally new
-	 * configuration, reset the AP, unassoc, rxon timing, assoc,
-	 * clear sta table, add BCAST sta... */
-}
-
-static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = {
-	.get_hcmd_size = iwl4965_get_hcmd_size,
-	.build_addsta_hcmd = iwl4965_build_addsta_hcmd,
-	.chain_noise_reset = iwl4965_chain_noise_reset,
-	.gain_computation = iwl4965_gain_computation,
-	.tx_cmd_protection = iwl_legacy_tx_cmd_protection,
-	.calc_rssi = iwl4965_calc_rssi,
-	.request_scan = iwlagn_request_scan,
-	.post_scan = iwl4965_post_scan,
-};
-
-static struct iwl_lib_ops iwl4965_lib = {
-	.set_hw_params = iwl4965_hw_set_hw_params,
-	.txq_update_byte_cnt_tbl = iwl4965_txq_update_byte_cnt_tbl,
-	.txq_set_sched = iwl4965_txq_set_sched,
-	.txq_agg_enable = iwl4965_txq_agg_enable,
-	.txq_agg_disable = iwl4965_txq_agg_disable,
-	.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
-	.txq_free_tfd = iwl_hw_txq_free_tfd,
-	.txq_init = iwl_hw_tx_queue_init,
-	.rx_handler_setup = iwl4965_rx_handler_setup,
-	.setup_deferred_work = iwl4965_setup_deferred_work,
-	.cancel_deferred_work = iwl4965_cancel_deferred_work,
-	.is_valid_rtc_data_addr = iwl4965_hw_valid_rtc_data_addr,
-	.alive_notify = iwl4965_alive_notify,
-	.init_alive_start = iwl4965_init_alive_start,
-	.load_ucode = iwl4965_load_bsm,
-	.dump_nic_event_log = iwl_dump_nic_event_log,
-	.dump_nic_error_log = iwl_dump_nic_error_log,
-	.dump_fh = iwl_dump_fh,
-	.set_channel_switch = iwl4965_hw_channel_switch,
-	.apm_ops = {
-		.init = iwl_apm_init,
-		.config = iwl4965_nic_config,
-	},
-	.eeprom_ops = {
-		.regulatory_bands = {
-			EEPROM_REGULATORY_BAND_1_CHANNELS,
-			EEPROM_REGULATORY_BAND_2_CHANNELS,
-			EEPROM_REGULATORY_BAND_3_CHANNELS,
-			EEPROM_REGULATORY_BAND_4_CHANNELS,
-			EEPROM_REGULATORY_BAND_5_CHANNELS,
-			EEPROM_4965_REGULATORY_BAND_24_HT40_CHANNELS,
-			EEPROM_4965_REGULATORY_BAND_52_HT40_CHANNELS
-		},
-		.acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
-		.release_semaphore = iwlcore_eeprom_release_semaphore,
-		.calib_version = iwl4965_eeprom_calib_version,
-		.query_addr = iwlcore_eeprom_query_addr,
-	},
-	.send_tx_power	= iwl4965_send_tx_power,
-	.update_chain_flags = iwl_update_chain_flags,
-	.isr_ops = {
-		.isr = iwl_isr_legacy,
-	},
-	.temp_ops = {
-		.temperature = iwl4965_temperature_calib,
-	},
-	.debugfs_ops = {
-		.rx_stats_read = iwl_ucode_rx_stats_read,
-		.tx_stats_read = iwl_ucode_tx_stats_read,
-		.general_stats_read = iwl_ucode_general_stats_read,
-		.bt_stats_read = iwl_ucode_bt_stats_read,
-		.reply_tx_error = iwl_reply_tx_error_read,
-	},
-	.check_plcp_health = iwl_good_plcp_health,
-};
-
-static const struct iwl_legacy_ops iwl4965_legacy_ops = {
-	.post_associate = iwl4965_post_associate,
-	.config_ap = iwl4965_config_ap,
-	.manage_ibss_station = iwlagn_manage_ibss_station,
-	.update_bcast_stations = iwl_update_bcast_stations,
-};
-
-struct ieee80211_ops iwl4965_hw_ops = {
-	.tx = iwlagn_mac_tx,
-	.start = iwlagn_mac_start,
-	.stop = iwlagn_mac_stop,
-	.add_interface = iwl_mac_add_interface,
-	.remove_interface = iwl_mac_remove_interface,
-	.change_interface = iwl_mac_change_interface,
-	.config = iwl_legacy_mac_config,
-	.configure_filter = iwlagn_configure_filter,
-	.set_key = iwlagn_mac_set_key,
-	.update_tkip_key = iwlagn_mac_update_tkip_key,
-	.conf_tx = iwl_mac_conf_tx,
-	.reset_tsf = iwl_legacy_mac_reset_tsf,
-	.bss_info_changed = iwl_legacy_mac_bss_info_changed,
-	.ampdu_action = iwlagn_mac_ampdu_action,
-	.hw_scan = iwl_mac_hw_scan,
-	.sta_add = iwlagn_mac_sta_add,
-	.sta_remove = iwl_mac_sta_remove,
-	.channel_switch = iwlagn_mac_channel_switch,
-	.flush = iwlagn_mac_flush,
-	.tx_last_beacon = iwl_mac_tx_last_beacon,
-};
-
-static const struct iwl_ops iwl4965_ops = {
-	.lib = &iwl4965_lib,
-	.hcmd = &iwl4965_hcmd,
-	.utils = &iwl4965_hcmd_utils,
-	.led = &iwlagn_led_ops,
-	.legacy = &iwl4965_legacy_ops,
-	.ieee80211_ops = &iwl4965_hw_ops,
-};
-
-static struct iwl_base_params iwl4965_base_params = {
-	.eeprom_size = IWL4965_EEPROM_IMG_SIZE,
-	.num_of_queues = IWL49_NUM_QUEUES,
-	.num_of_ampdu_queues = IWL49_NUM_AMPDU_QUEUES,
-	.pll_cfg_val = 0,
-	.set_l0s = true,
-	.use_bsm = true,
-	.use_isr_legacy = true,
-	.broken_powersave = true,
-	.led_compensation = 61,
-	.chain_noise_num_beacons = IWL4965_CAL_NUM_BEACONS,
-	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
-	.wd_timeout = IWL_DEF_WD_TIMEOUT,
-	.temperature_kelvin = true,
-	.max_event_log_size = 512,
-	.tx_power_by_driver = true,
-	.ucode_tracing = true,
-	.sensitivity_calib_by_driver = true,
-	.chain_noise_calib_by_driver = true,
-	.no_agg_framecnt_info = true,
-};
-
-struct iwl_cfg iwl4965_agn_cfg = {
-	.name = "Intel(R) Wireless WiFi Link 4965AGN",
-	.fw_name_pre = IWL4965_FW_PRE,
-	.ucode_api_max = IWL4965_UCODE_API_MAX,
-	.ucode_api_min = IWL4965_UCODE_API_MIN,
-	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
-	.valid_tx_ant = ANT_AB,
-	.valid_rx_ant = ANT_ABC,
-	.eeprom_ver = EEPROM_4965_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_4965_TX_POWER_VERSION,
-	.ops = &iwl4965_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl4965_base_params,
-	.led_mode = IWL_LED_BLINK,
-	/*
-	 * Force use of chains B and C for scan RX on 5 GHz band
-	 * because the device has off-channel reception on chain A.
-	 */
-	.scan_rx_antennas[IEEE80211_BAND_5GHZ] = ANT_BC,
-};
-
-/* Module firmware */
-MODULE_FIRMWARE(IWL4965_MODULE_FIRMWARE(IWL4965_UCODE_API_MAX));
-
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 79ab0a6b138..90e727b1b4c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -402,8 +402,6 @@ static struct iwl_lib_ops iwl5000_lib = {
 		.bt_stats_read = iwl_ucode_bt_stats_read,
 		.reply_tx_error = iwl_reply_tx_error_read,
 	},
-	.check_plcp_health = iwl_good_plcp_health,
-	.check_ack_health = iwl_good_ack_health,
 	.txfifo_flush = iwlagn_txfifo_flush,
 	.dev_txfifo_flush = iwlagn_dev_txfifo_flush,
 	.tt_ops = {
@@ -471,8 +469,6 @@ static struct iwl_lib_ops iwl5150_lib = {
 		.bt_stats_read = iwl_ucode_bt_stats_read,
 		.reply_tx_error = iwl_reply_tx_error_read,
 	},
-	.check_plcp_health = iwl_good_plcp_health,
-	.check_ack_health = iwl_good_ack_health,
 	.txfifo_flush = iwlagn_txfifo_flush,
 	.dev_txfifo_flush = iwlagn_dev_txfifo_flush,
 	.tt_ops = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index f6493f77610..a745b01c0ec 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -343,8 +343,6 @@ static struct iwl_lib_ops iwl6000_lib = {
 		.bt_stats_read = iwl_ucode_bt_stats_read,
 		.reply_tx_error = iwl_reply_tx_error_read,
 	},
-	.check_plcp_health = iwl_good_plcp_health,
-	.check_ack_health = iwl_good_ack_health,
 	.txfifo_flush = iwlagn_txfifo_flush,
 	.dev_txfifo_flush = iwlagn_dev_txfifo_flush,
 	.tt_ops = {
@@ -415,8 +413,6 @@ static struct iwl_lib_ops iwl6030_lib = {
 		.bt_stats_read = iwl_ucode_bt_stats_read,
 		.reply_tx_error = iwl_reply_tx_error_read,
 	},
-	.check_plcp_health = iwl_good_plcp_health,
-	.check_ack_health = iwl_good_ack_health,
 	.txfifo_flush = iwlagn_txfifo_flush,
 	.dev_txfifo_flush = iwlagn_dev_txfifo_flush,
 	.tt_ops = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
index 325ff5c89ee..fd142bee918 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
@@ -609,6 +609,7 @@ const u8 *iwlagn_eeprom_query_addr(const struct iwl_priv *priv,
 struct iwl_mod_params iwlagn_mod_params = {
 	.amsdu_size_8K = 1,
 	.restart_fw = 1,
+	.plcp_check = true,
 	/* the rest are 0 by default */
 };
 
@@ -1173,7 +1174,7 @@ void iwlagn_rx_reply_rx(struct iwl_priv *priv,
 
 	/* TSF isn't reliable. In order to allow smooth user experience,
 	 * this W/A doesn't propagate it to the mac80211 */
-	/*rx_status.flag |= RX_FLAG_TSFT;*/
+	/*rx_status.flag |= RX_FLAG_MACTIME_MPDU;*/
 
 	priv->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp);
 
@@ -1804,26 +1805,39 @@ static const __le32 iwlagn_concurrent_lookup[12] = {
 
 void iwlagn_send_advance_bt_config(struct iwl_priv *priv)
 {
-	struct iwlagn_bt_cmd bt_cmd = {
+	struct iwl_basic_bt_cmd basic = {
 		.max_kill = IWLAGN_BT_MAX_KILL_DEFAULT,
 		.bt3_timer_t7_value = IWLAGN_BT3_T7_DEFAULT,
 		.bt3_prio_sample_time = IWLAGN_BT3_PRIO_SAMPLE_DEFAULT,
 		.bt3_timer_t2_value = IWLAGN_BT3_T2_DEFAULT,
 	};
+	struct iwl6000_bt_cmd bt_cmd_6000;
+	struct iwl2000_bt_cmd bt_cmd_2000;
+	int ret;
 
 	BUILD_BUG_ON(sizeof(iwlagn_def_3w_lookup) !=
-			sizeof(bt_cmd.bt3_lookup_table));
-
-	if (priv->cfg->bt_params)
-		bt_cmd.prio_boost = priv->cfg->bt_params->bt_prio_boost;
-	else
-		bt_cmd.prio_boost = 0;
-	bt_cmd.kill_ack_mask = priv->kill_ack_mask;
-	bt_cmd.kill_cts_mask = priv->kill_cts_mask;
+			sizeof(basic.bt3_lookup_table));
+
+	if (priv->cfg->bt_params) {
+		if (priv->cfg->bt_params->bt_session_2) {
+			bt_cmd_2000.prio_boost = cpu_to_le32(
+				priv->cfg->bt_params->bt_prio_boost);
+			bt_cmd_2000.tx_prio_boost = 0;
+			bt_cmd_2000.rx_prio_boost = 0;
+		} else {
+			bt_cmd_6000.prio_boost =
+				priv->cfg->bt_params->bt_prio_boost;
+			bt_cmd_6000.tx_prio_boost = 0;
+			bt_cmd_6000.rx_prio_boost = 0;
+		}
+	} else {
+		IWL_ERR(priv, "failed to construct BT Coex Config\n");
+		return;
+	}
 
-	bt_cmd.valid = priv->bt_valid;
-	bt_cmd.tx_prio_boost = 0;
-	bt_cmd.rx_prio_boost = 0;
+	basic.kill_ack_mask = priv->kill_ack_mask;
+	basic.kill_cts_mask = priv->kill_cts_mask;
+	basic.valid = priv->bt_valid;
 
 	/*
 	 * Configure BT coex mode to "no coexistence" when the
@@ -1832,32 +1846,43 @@ void iwlagn_send_advance_bt_config(struct iwl_priv *priv)
 	 * IBSS mode (no proper uCode support for coex then).
 	 */
 	if (!bt_coex_active || priv->iw_mode == NL80211_IFTYPE_ADHOC) {
-		bt_cmd.flags = IWLAGN_BT_FLAG_COEX_MODE_DISABLED;
+		basic.flags = IWLAGN_BT_FLAG_COEX_MODE_DISABLED;
 	} else {
-		bt_cmd.flags = IWLAGN_BT_FLAG_COEX_MODE_3W <<
+		basic.flags = IWLAGN_BT_FLAG_COEX_MODE_3W <<
 					IWLAGN_BT_FLAG_COEX_MODE_SHIFT;
 		if (priv->cfg->bt_params &&
 		    priv->cfg->bt_params->bt_sco_disable)
-			bt_cmd.flags |= IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE;
+			basic.flags |= IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE;
 
 		if (priv->bt_ch_announce)
-			bt_cmd.flags |= IWLAGN_BT_FLAG_CHANNEL_INHIBITION;
-		IWL_DEBUG_INFO(priv, "BT coex flag: 0X%x\n", bt_cmd.flags);
+			basic.flags |= IWLAGN_BT_FLAG_CHANNEL_INHIBITION;
+		IWL_DEBUG_INFO(priv, "BT coex flag: 0X%x\n", basic.flags);
 	}
-	priv->bt_enable_flag = bt_cmd.flags;
+	priv->bt_enable_flag = basic.flags;
 	if (priv->bt_full_concurrent)
-		memcpy(bt_cmd.bt3_lookup_table, iwlagn_concurrent_lookup,
+		memcpy(basic.bt3_lookup_table, iwlagn_concurrent_lookup,
 			sizeof(iwlagn_concurrent_lookup));
 	else
-		memcpy(bt_cmd.bt3_lookup_table, iwlagn_def_3w_lookup,
+		memcpy(basic.bt3_lookup_table, iwlagn_def_3w_lookup,
 			sizeof(iwlagn_def_3w_lookup));
 
 	IWL_DEBUG_INFO(priv, "BT coex %s in %s mode\n",
-		       bt_cmd.flags ? "active" : "disabled",
+		       basic.flags ? "active" : "disabled",
 		       priv->bt_full_concurrent ?
 		       "full concurrency" : "3-wire");
 
-	if (iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG, sizeof(bt_cmd), &bt_cmd))
+	if (priv->cfg->bt_params->bt_session_2) {
+		memcpy(&bt_cmd_2000.basic, &basic,
+			sizeof(basic));
+		ret = iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG,
+			sizeof(bt_cmd_2000), &bt_cmd_2000);
+	} else {
+		memcpy(&bt_cmd_6000.basic, &basic,
+			sizeof(basic));
+		ret = iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG,
+			sizeof(bt_cmd_6000), &bt_cmd_6000);
+	}
+	if (ret)
 		IWL_ERR(priv, "failed to send BT Coex Config\n");
 
 }
@@ -1984,12 +2009,14 @@ static void iwlagn_print_uartmsg(struct iwl_priv *priv,
 		(BT_UART_MSG_FRAME6DISCOVERABLE_MSK & uart_msg->frame6) >>
 			BT_UART_MSG_FRAME6DISCOVERABLE_POS);
 
-	IWL_DEBUG_NOTIF(priv, "Sniff Activity = 0x%X, Inquiry/Page SR Mode = "
-			"0x%X, Connectable = 0x%X",
+	IWL_DEBUG_NOTIF(priv, "Sniff Activity = 0x%X, Page = "
+			"0x%X, Inquiry = 0x%X, Connectable = 0x%X",
 		(BT_UART_MSG_FRAME7SNIFFACTIVITY_MSK & uart_msg->frame7) >>
 			BT_UART_MSG_FRAME7SNIFFACTIVITY_POS,
-		(BT_UART_MSG_FRAME7INQUIRYPAGESRMODE_MSK & uart_msg->frame7) >>
-			BT_UART_MSG_FRAME7INQUIRYPAGESRMODE_POS,
+		(BT_UART_MSG_FRAME7PAGE_MSK & uart_msg->frame7) >>
+			BT_UART_MSG_FRAME7PAGE_POS,
+		(BT_UART_MSG_FRAME7INQUIRY_MSK & uart_msg->frame7) >>
+			BT_UART_MSG_FRAME7INQUIRY_POS,
 		(BT_UART_MSG_FRAME7CONNECTABLE_MSK & uart_msg->frame7) >>
 			BT_UART_MSG_FRAME7CONNECTABLE_POS);
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rx.c b/drivers/net/wireless/iwlwifi/iwl-agn-rx.c
deleted file mode 100644
index b192ca842f0..00000000000
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rx.c
+++ /dev/null
@@ -1,351 +0,0 @@
-/******************************************************************************
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-agn-calib.h"
-#include "iwl-sta.h"
-#include "iwl-io.h"
-#include "iwl-helpers.h"
-#include "iwl-agn-hw.h"
-#include "iwl-agn.h"
-
-void iwl_rx_missed_beacon_notif(struct iwl_priv *priv,
-				struct iwl_rx_mem_buffer *rxb)
-
-{
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-	struct iwl_missed_beacon_notif *missed_beacon;
-
-	missed_beacon = &pkt->u.missed_beacon;
-	if (le32_to_cpu(missed_beacon->consecutive_missed_beacons) >
-	    priv->missed_beacon_threshold) {
-		IWL_DEBUG_CALIB(priv,
-		    "missed bcn cnsq %d totl %d rcd %d expctd %d\n",
-		    le32_to_cpu(missed_beacon->consecutive_missed_beacons),
-		    le32_to_cpu(missed_beacon->total_missed_becons),
-		    le32_to_cpu(missed_beacon->num_recvd_beacons),
-		    le32_to_cpu(missed_beacon->num_expected_beacons));
-		if (!test_bit(STATUS_SCANNING, &priv->status))
-			iwl_init_sensitivity(priv);
-	}
-}
-
-/* Calculate noise level, based on measurements during network silence just
- *   before arriving beacon.  This measurement can be done only if we know
- *   exactly when to expect beacons, therefore only when we're associated. */
-static void iwl_rx_calc_noise(struct iwl_priv *priv)
-{
-	struct statistics_rx_non_phy *rx_info;
-	int num_active_rx = 0;
-	int total_silence = 0;
-	int bcn_silence_a, bcn_silence_b, bcn_silence_c;
-	int last_rx_noise;
-
-	if (iwl_bt_statistics(priv))
-		rx_info = &(priv->_agn.statistics_bt.rx.general.common);
-	else
-		rx_info = &(priv->_agn.statistics.rx.general);
-	bcn_silence_a =
-		le32_to_cpu(rx_info->beacon_silence_rssi_a) & IN_BAND_FILTER;
-	bcn_silence_b =
-		le32_to_cpu(rx_info->beacon_silence_rssi_b) & IN_BAND_FILTER;
-	bcn_silence_c =
-		le32_to_cpu(rx_info->beacon_silence_rssi_c) & IN_BAND_FILTER;
-
-	if (bcn_silence_a) {
-		total_silence += bcn_silence_a;
-		num_active_rx++;
-	}
-	if (bcn_silence_b) {
-		total_silence += bcn_silence_b;
-		num_active_rx++;
-	}
-	if (bcn_silence_c) {
-		total_silence += bcn_silence_c;
-		num_active_rx++;
-	}
-
-	/* Average among active antennas */
-	if (num_active_rx)
-		last_rx_noise = (total_silence / num_active_rx) - 107;
-	else
-		last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
-
-	IWL_DEBUG_CALIB(priv, "inband silence a %u, b %u, c %u, dBm %d\n",
-			bcn_silence_a, bcn_silence_b, bcn_silence_c,
-			last_rx_noise);
-}
-
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-/*
- *  based on the assumption of all statistics counter are in DWORD
- *  FIXME: This function is for debugging, do not deal with
- *  the case of counters roll-over.
- */
-static void iwl_accumulative_statistics(struct iwl_priv *priv,
-					__le32 *stats)
-{
-	int i, size;
-	__le32 *prev_stats;
-	u32 *accum_stats;
-	u32 *delta, *max_delta;
-	struct statistics_general_common *general, *accum_general;
-	struct statistics_tx *tx, *accum_tx;
-
-	if (iwl_bt_statistics(priv)) {
-		prev_stats = (__le32 *)&priv->_agn.statistics_bt;
-		accum_stats = (u32 *)&priv->_agn.accum_statistics_bt;
-		size = sizeof(struct iwl_bt_notif_statistics);
-		general = &priv->_agn.statistics_bt.general.common;
-		accum_general = &priv->_agn.accum_statistics_bt.general.common;
-		tx = &priv->_agn.statistics_bt.tx;
-		accum_tx = &priv->_agn.accum_statistics_bt.tx;
-		delta = (u32 *)&priv->_agn.delta_statistics_bt;
-		max_delta = (u32 *)&priv->_agn.max_delta_bt;
-	} else {
-		prev_stats = (__le32 *)&priv->_agn.statistics;
-		accum_stats = (u32 *)&priv->_agn.accum_statistics;
-		size = sizeof(struct iwl_notif_statistics);
-		general = &priv->_agn.statistics.general.common;
-		accum_general = &priv->_agn.accum_statistics.general.common;
-		tx = &priv->_agn.statistics.tx;
-		accum_tx = &priv->_agn.accum_statistics.tx;
-		delta = (u32 *)&priv->_agn.delta_statistics;
-		max_delta = (u32 *)&priv->_agn.max_delta;
-	}
-	for (i = sizeof(__le32); i < size;
-	     i += sizeof(__le32), stats++, prev_stats++, delta++,
-	     max_delta++, accum_stats++) {
-		if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) {
-			*delta = (le32_to_cpu(*stats) -
-				le32_to_cpu(*prev_stats));
-			*accum_stats += *delta;
-			if (*delta > *max_delta)
-				*max_delta = *delta;
-		}
-	}
-
-	/* reset accumulative statistics for "no-counter" type statistics */
-	accum_general->temperature = general->temperature;
-	accum_general->temperature_m = general->temperature_m;
-	accum_general->ttl_timestamp = general->ttl_timestamp;
-	accum_tx->tx_power.ant_a = tx->tx_power.ant_a;
-	accum_tx->tx_power.ant_b = tx->tx_power.ant_b;
-	accum_tx->tx_power.ant_c = tx->tx_power.ant_c;
-}
-#endif
-
-#define REG_RECALIB_PERIOD (60)
-
-/**
- * iwl_good_plcp_health - checks for plcp error.
- *
- * When the plcp error is exceeding the thresholds, reset the radio
- * to improve the throughput.
- */
-bool iwl_good_plcp_health(struct iwl_priv *priv,
-				struct iwl_rx_packet *pkt)
-{
-	bool rc = true;
-	int combined_plcp_delta;
-	unsigned int plcp_msec;
-	unsigned long plcp_received_jiffies;
-
-	if (priv->cfg->base_params->plcp_delta_threshold ==
-	    IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE) {
-		IWL_DEBUG_RADIO(priv, "plcp_err check disabled\n");
-		return rc;
-	}
-
-	/*
-	 * check for plcp_err and trigger radio reset if it exceeds
-	 * the plcp error threshold plcp_delta.
-	 */
-	plcp_received_jiffies = jiffies;
-	plcp_msec = jiffies_to_msecs((long) plcp_received_jiffies -
-					(long) priv->plcp_jiffies);
-	priv->plcp_jiffies = plcp_received_jiffies;
-	/*
-	 * check to make sure plcp_msec is not 0 to prevent division
-	 * by zero.
-	 */
-	if (plcp_msec) {
-		struct statistics_rx_phy *ofdm;
-		struct statistics_rx_ht_phy *ofdm_ht;
-
-		if (iwl_bt_statistics(priv)) {
-			ofdm = &pkt->u.stats_bt.rx.ofdm;
-			ofdm_ht = &pkt->u.stats_bt.rx.ofdm_ht;
-			combined_plcp_delta =
-			   (le32_to_cpu(ofdm->plcp_err) -
-			   le32_to_cpu(priv->_agn.statistics_bt.
-				       rx.ofdm.plcp_err)) +
-			   (le32_to_cpu(ofdm_ht->plcp_err) -
-			   le32_to_cpu(priv->_agn.statistics_bt.
-				       rx.ofdm_ht.plcp_err));
-		} else {
-			ofdm = &pkt->u.stats.rx.ofdm;
-			ofdm_ht = &pkt->u.stats.rx.ofdm_ht;
-			combined_plcp_delta =
-			    (le32_to_cpu(ofdm->plcp_err) -
-			    le32_to_cpu(priv->_agn.statistics.
-					rx.ofdm.plcp_err)) +
-			    (le32_to_cpu(ofdm_ht->plcp_err) -
-			    le32_to_cpu(priv->_agn.statistics.
-					rx.ofdm_ht.plcp_err));
-		}
-
-		if ((combined_plcp_delta > 0) &&
-		    ((combined_plcp_delta * 100) / plcp_msec) >
-			priv->cfg->base_params->plcp_delta_threshold) {
-			/*
-			 * if plcp_err exceed the threshold,
-			 * the following data is printed in csv format:
-			 *    Text: plcp_err exceeded %d,
-			 *    Received ofdm.plcp_err,
-			 *    Current ofdm.plcp_err,
-			 *    Received ofdm_ht.plcp_err,
-			 *    Current ofdm_ht.plcp_err,
-			 *    combined_plcp_delta,
-			 *    plcp_msec
-			 */
-			IWL_DEBUG_RADIO(priv, "plcp_err exceeded %u, "
-				"%u, %u, %u, %u, %d, %u mSecs\n",
-				priv->cfg->base_params->plcp_delta_threshold,
-				le32_to_cpu(ofdm->plcp_err),
-				le32_to_cpu(ofdm->plcp_err),
-				le32_to_cpu(ofdm_ht->plcp_err),
-				le32_to_cpu(ofdm_ht->plcp_err),
-				combined_plcp_delta, plcp_msec);
-
-			rc = false;
-		}
-	}
-	return rc;
-}
-
-void iwl_rx_statistics(struct iwl_priv *priv,
-			      struct iwl_rx_mem_buffer *rxb)
-{
-	int change;
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-
-	if (iwl_bt_statistics(priv)) {
-		IWL_DEBUG_RX(priv,
-			     "Statistics notification received (%d vs %d).\n",
-			     (int)sizeof(struct iwl_bt_notif_statistics),
-			     le32_to_cpu(pkt->len_n_flags) &
-			     FH_RSCSR_FRAME_SIZE_MSK);
-
-		change = ((priv->_agn.statistics_bt.general.common.temperature !=
-			   pkt->u.stats_bt.general.common.temperature) ||
-			   ((priv->_agn.statistics_bt.flag &
-			   STATISTICS_REPLY_FLG_HT40_MODE_MSK) !=
-			   (pkt->u.stats_bt.flag &
-			   STATISTICS_REPLY_FLG_HT40_MODE_MSK)));
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-		iwl_accumulative_statistics(priv, (__le32 *)&pkt->u.stats_bt);
-#endif
-
-	} else {
-		IWL_DEBUG_RX(priv,
-			     "Statistics notification received (%d vs %d).\n",
-			     (int)sizeof(struct iwl_notif_statistics),
-			     le32_to_cpu(pkt->len_n_flags) &
-			     FH_RSCSR_FRAME_SIZE_MSK);
-
-		change = ((priv->_agn.statistics.general.common.temperature !=
-			   pkt->u.stats.general.common.temperature) ||
-			   ((priv->_agn.statistics.flag &
-			   STATISTICS_REPLY_FLG_HT40_MODE_MSK) !=
-			   (pkt->u.stats.flag &
-			   STATISTICS_REPLY_FLG_HT40_MODE_MSK)));
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-		iwl_accumulative_statistics(priv, (__le32 *)&pkt->u.stats);
-#endif
-
-	}
-
-	iwl_recover_from_statistics(priv, pkt);
-
-	if (iwl_bt_statistics(priv))
-		memcpy(&priv->_agn.statistics_bt, &pkt->u.stats_bt,
-			sizeof(priv->_agn.statistics_bt));
-	else
-		memcpy(&priv->_agn.statistics, &pkt->u.stats,
-			sizeof(priv->_agn.statistics));
-
-	set_bit(STATUS_STATISTICS, &priv->status);
-
-	/* Reschedule the statistics timer to occur in
-	 * REG_RECALIB_PERIOD seconds to ensure we get a
-	 * thermal update even if the uCode doesn't give
-	 * us one */
-	mod_timer(&priv->statistics_periodic, jiffies +
-		  msecs_to_jiffies(REG_RECALIB_PERIOD * 1000));
-
-	if (unlikely(!test_bit(STATUS_SCANNING, &priv->status)) &&
-	    (pkt->hdr.cmd == STATISTICS_NOTIFICATION)) {
-		iwl_rx_calc_noise(priv);
-		queue_work(priv->workqueue, &priv->run_time_calib_work);
-	}
-	if (priv->cfg->ops->lib->temp_ops.temperature && change)
-		priv->cfg->ops->lib->temp_ops.temperature(priv);
-}
-
-void iwl_reply_statistics(struct iwl_priv *priv,
-			      struct iwl_rx_mem_buffer *rxb)
-{
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-
-	if (le32_to_cpu(pkt->u.stats.flag) & UCODE_STATISTICS_CLEAR_MSK) {
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-		memset(&priv->_agn.accum_statistics, 0,
-			sizeof(struct iwl_notif_statistics));
-		memset(&priv->_agn.delta_statistics, 0,
-			sizeof(struct iwl_notif_statistics));
-		memset(&priv->_agn.max_delta, 0,
-			sizeof(struct iwl_notif_statistics));
-		memset(&priv->_agn.accum_statistics_bt, 0,
-			sizeof(struct iwl_bt_notif_statistics));
-		memset(&priv->_agn.delta_statistics_bt, 0,
-			sizeof(struct iwl_bt_notif_statistics));
-		memset(&priv->_agn.max_delta_bt, 0,
-			sizeof(struct iwl_bt_notif_statistics));
-#endif
-		IWL_DEBUG_RX(priv, "Statistics have been cleared\n");
-	}
-	iwl_rx_statistics(priv, rxb);
-}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
index 6c2adc58d65..dfdbea6e8f9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
@@ -471,6 +471,7 @@ static void iwlagn_check_needed_chains(struct iwl_priv *priv,
 	struct iwl_rxon_context *tmp;
 	struct ieee80211_sta *sta;
 	struct iwl_ht_config *ht_conf = &priv->current_ht_config;
+	struct ieee80211_sta_ht_cap *ht_cap;
 	bool need_multiple;
 
 	lockdep_assert_held(&priv->mutex);
@@ -479,23 +480,7 @@ static void iwlagn_check_needed_chains(struct iwl_priv *priv,
 	case NL80211_IFTYPE_STATION:
 		rcu_read_lock();
 		sta = ieee80211_find_sta(vif, bss_conf->bssid);
-		if (sta) {
-			struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
-			int maxstreams;
-
-			maxstreams = (ht_cap->mcs.tx_params &
-				      IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK)
-					>> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
-			maxstreams += 1;
-
-			need_multiple = true;
-
-			if ((ht_cap->mcs.rx_mask[1] == 0) &&
-			    (ht_cap->mcs.rx_mask[2] == 0))
-				need_multiple = false;
-			if (maxstreams <= 1)
-				need_multiple = false;
-		} else {
+		if (!sta) {
 			/*
 			 * If at all, this can only happen through a race
 			 * when the AP disconnects us while we're still
@@ -503,7 +488,46 @@ static void iwlagn_check_needed_chains(struct iwl_priv *priv,
 			 * will soon tell us about that.
 			 */
 			need_multiple = false;
+			rcu_read_unlock();
+			break;
+		}
+
+		ht_cap = &sta->ht_cap;
+
+		need_multiple = true;
+
+		/*
+		 * If the peer advertises no support for receiving 2 and 3
+		 * stream MCS rates, it can't be transmitting them either.
+		 */
+		if (ht_cap->mcs.rx_mask[1] == 0 &&
+		    ht_cap->mcs.rx_mask[2] == 0) {
+			need_multiple = false;
+		} else if (!(ht_cap->mcs.tx_params &
+						IEEE80211_HT_MCS_TX_DEFINED)) {
+			/* If it can't TX MCS at all ... */
+			need_multiple = false;
+		} else if (ht_cap->mcs.tx_params &
+						IEEE80211_HT_MCS_TX_RX_DIFF) {
+			int maxstreams;
+
+			/*
+			 * But if it can receive them, it might still not
+			 * be able to transmit them, which is what we need
+			 * to check here -- so check the number of streams
+			 * it advertises for TX (if different from RX).
+			 */
+
+			maxstreams = (ht_cap->mcs.tx_params &
+				 IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK);
+			maxstreams >>=
+				IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
+			maxstreams += 1;
+
+			if (maxstreams <= 1)
+				need_multiple = false;
 		}
+
 		rcu_read_unlock();
 		break;
 	case NL80211_IFTYPE_ADHOC:
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
index 266490d8a39..a709d05c586 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
@@ -947,7 +947,7 @@ void iwlagn_txq_ctx_reset(struct iwl_priv *priv)
  */
 void iwlagn_txq_ctx_stop(struct iwl_priv *priv)
 {
-	int ch;
+	int ch, txq_id;
 	unsigned long flags;
 
 	/* Turn off all Tx DMA fifos */
@@ -966,6 +966,16 @@ void iwlagn_txq_ctx_stop(struct iwl_priv *priv)
 			    iwl_read_direct32(priv, FH_TSSR_TX_STATUS_REG));
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (!priv->txq)
+		return;
+
+	/* Unmap DMA from host system and free skb's */
+	for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++)
+		if (txq_id == priv->cmd_queue)
+			iwl_cmd_queue_unmap(priv);
+		else
+			iwl_tx_queue_unmap(priv, txq_id);
 }
 
 /*
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 8025c62d4d0..f189bbe78fa 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -86,7 +86,6 @@ MODULE_DESCRIPTION(DRV_DESCRIPTION);
 MODULE_VERSION(DRV_VERSION);
 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("iwl4965");
 
 static int iwlagn_ant_coupling;
 static bool iwlagn_bt_ch_announce = 1;
@@ -466,6 +465,15 @@ static void iwl_rx_reply_alive(struct iwl_priv *priv,
 		IWL_WARN(priv, "%s uCode did not respond OK.\n",
 			(palive->ver_subtype == INITIALIZE_SUBTYPE) ?
 			"init" : "runtime");
+		/*
+		 * If fail to load init uCode,
+		 * let's try to load the init uCode again.
+		 * We should not get into this situation, but if it
+		 * does happen, we should not move on and loading "runtime"
+		 * without proper calibrate the device.
+		 */
+		if (palive->ver_subtype == INITIALIZE_SUBTYPE)
+			priv->ucode_type = UCODE_NONE;
 		queue_work(priv->workqueue, &priv->restart);
 	}
 }
@@ -1405,72 +1413,6 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
 		iwl_enable_rfkill_int(priv);
 }
 
-/* the threshold ratio of actual_ack_cnt to expected_ack_cnt in percent */
-#define ACK_CNT_RATIO (50)
-#define BA_TIMEOUT_CNT (5)
-#define BA_TIMEOUT_MAX (16)
-
-/**
- * iwl_good_ack_health - checks for ACK count ratios, BA timeout retries.
- *
- * When the ACK count ratio is low and aggregated BA timeout retries exceeding
- * the BA_TIMEOUT_MAX, reload firmware and bring system back to normal
- * operation state.
- */
-bool iwl_good_ack_health(struct iwl_priv *priv, struct iwl_rx_packet *pkt)
-{
-	int actual_delta, expected_delta, ba_timeout_delta;
-	struct statistics_tx *cur, *old;
-
-	if (priv->_agn.agg_tids_count)
-		return true;
-
-	if (iwl_bt_statistics(priv)) {
-		cur = &pkt->u.stats_bt.tx;
-		old = &priv->_agn.statistics_bt.tx;
-	} else {
-		cur = &pkt->u.stats.tx;
-		old = &priv->_agn.statistics.tx;
-	}
-
-	actual_delta = le32_to_cpu(cur->actual_ack_cnt) -
-		       le32_to_cpu(old->actual_ack_cnt);
-	expected_delta = le32_to_cpu(cur->expected_ack_cnt) -
-			 le32_to_cpu(old->expected_ack_cnt);
-
-	/* Values should not be negative, but we do not trust the firmware */
-	if (actual_delta <= 0 || expected_delta <= 0)
-		return true;
-
-	ba_timeout_delta = le32_to_cpu(cur->agg.ba_timeout) -
-			   le32_to_cpu(old->agg.ba_timeout);
-
-	if ((actual_delta * 100 / expected_delta) < ACK_CNT_RATIO &&
-	    ba_timeout_delta > BA_TIMEOUT_CNT) {
-		IWL_DEBUG_RADIO(priv, "deltas: actual %d expected %d ba_timeout %d\n",
-				actual_delta, expected_delta, ba_timeout_delta);
-
-#ifdef CONFIG_IWLWIFI_DEBUGFS
-		/*
-		 * This is ifdef'ed on DEBUGFS because otherwise the
-		 * statistics aren't available. If DEBUGFS is set but
-		 * DEBUG is not, these will just compile out.
-		 */
-		IWL_DEBUG_RADIO(priv, "rx_detected_cnt delta %d\n",
-				priv->_agn.delta_statistics.tx.rx_detected_cnt);
-		IWL_DEBUG_RADIO(priv,
-				"ack_or_ba_timeout_collision delta %d\n",
-				priv->_agn.delta_statistics.tx.ack_or_ba_timeout_collision);
-#endif
-
-		if (ba_timeout_delta >= BA_TIMEOUT_MAX)
-			return false;
-	}
-
-	return true;
-}
-
-
 /*****************************************************************************
  *
  * sysfs attributes
@@ -2735,9 +2677,11 @@ static void iwl_alive_start(struct iwl_priv *priv)
 			priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
 	}
 
-	if (priv->cfg->bt_params &&
-	    !priv->cfg->bt_params->advanced_bt_coexist) {
-		/* Configure Bluetooth device coexistence support */
+	if (!priv->cfg->bt_params || (priv->cfg->bt_params &&
+	    !priv->cfg->bt_params->advanced_bt_coexist)) {
+		/*
+		 * default is 2-wire BT coexexistence support
+		 */
 		priv->cfg->ops->hcmd->send_bt_config(priv);
 	}
 
@@ -3320,7 +3264,7 @@ void iwlagn_mac_stop(struct ieee80211_hw *hw)
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
 
-int iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+void iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 {
 	struct iwl_priv *priv = hw->priv;
 
@@ -3333,7 +3277,6 @@ int iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		dev_kfree_skb_any(skb);
 
 	IWL_DEBUG_MACDUMP(priv, "leave\n");
-	return NETDEV_TX_OK;
 }
 
 void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw,
@@ -3799,7 +3742,6 @@ static void iwlagn_bg_roc_done(struct work_struct *work)
 	mutex_unlock(&priv->mutex);
 }
 
-#ifdef CONFIG_IWL5000
 static int iwl_mac_remain_on_channel(struct ieee80211_hw *hw,
 				     struct ieee80211_channel *channel,
 				     enum nl80211_channel_type channel_type,
@@ -3855,7 +3797,6 @@ static int iwl_mac_cancel_remain_on_channel(struct ieee80211_hw *hw)
 
 	return 0;
 }
-#endif
 
 /*****************************************************************************
  *
@@ -4025,7 +3966,6 @@ static void iwl_uninit_drv(struct iwl_priv *priv)
 	kfree(priv->scan_cmd);
 }
 
-#ifdef CONFIG_IWL5000
 struct ieee80211_ops iwlagn_hw_ops = {
 	.tx = iwlagn_mac_tx,
 	.start = iwlagn_mac_start,
@@ -4050,7 +3990,6 @@ struct ieee80211_ops iwlagn_hw_ops = {
 	.remain_on_channel = iwl_mac_remain_on_channel,
 	.cancel_remain_on_channel = iwl_mac_cancel_remain_on_channel,
 };
-#endif
 
 static void iwl_hw_detect(struct iwl_priv *priv)
 {
@@ -4118,12 +4057,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (cfg->mod_params->disable_hw_scan) {
 		dev_printk(KERN_DEBUG, &(pdev->dev),
 			"sw scan support is deprecated\n");
-#ifdef CONFIG_IWL5000
 		iwlagn_hw_ops.hw_scan = NULL;
-#endif
-#ifdef CONFIG_IWL4965
-		iwl4965_hw_ops.hw_scan = NULL;
-#endif
 	}
 
 	hw = iwl_alloc_all(cfg);
@@ -4502,12 +4436,6 @@ static void __devexit iwl_pci_remove(struct pci_dev *pdev)
 
 /* Hardware specific file defines the PCI IDs table for that hardware module */
 static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
-#ifdef CONFIG_IWL4965
-	{IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)},
-	{IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)},
-#endif /* CONFIG_IWL4965 */
-#ifdef CONFIG_IWL5000
-/* 5100 Series WiFi */
 	{IWL_PCI_DEVICE(0x4232, 0x1201, iwl5100_agn_cfg)}, /* Mini Card */
 	{IWL_PCI_DEVICE(0x4232, 0x1301, iwl5100_agn_cfg)}, /* Half Mini Card */
 	{IWL_PCI_DEVICE(0x4232, 0x1204, iwl5100_agn_cfg)}, /* Mini Card */
@@ -4693,8 +4621,6 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
 	{IWL_PCI_DEVICE(0x0893, 0x0266, iwl230_bg_cfg)},
 	{IWL_PCI_DEVICE(0x0892, 0x0466, iwl230_bg_cfg)},
 
-#endif /* CONFIG_IWL5000 */
-
 	{0}
 };
 MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids);
@@ -4793,3 +4719,9 @@ MODULE_PARM_DESC(antenna_coupling,
 module_param_named(bt_ch_inhibition, iwlagn_bt_ch_announce, bool, S_IRUGO);
 MODULE_PARM_DESC(bt_ch_inhibition,
 		 "Disable BT channel inhibition (default: enable)");
+
+module_param_named(plcp_check, iwlagn_mod_params.plcp_check, bool, S_IRUGO);
+MODULE_PARM_DESC(plcp_check, "Check plcp health (default: 1 [enabled])");
+
+module_param_named(ack_check, iwlagn_mod_params.ack_check, bool, S_IRUGO);
+MODULE_PARM_DESC(ack_check, "Check ack health (default: 0 [disabled])");
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.h b/drivers/net/wireless/iwlwifi/iwl-agn.h
index d00e1ea50a8..b5a169be48e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.h
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.h
@@ -121,8 +121,6 @@ void iwl_disable_ict(struct iwl_priv *priv);
 int iwl_alloc_isr_ict(struct iwl_priv *priv);
 void iwl_free_isr_ict(struct iwl_priv *priv);
 irqreturn_t iwl_isr_ict(int irq, void *data);
-bool iwl_good_ack_health(struct iwl_priv *priv,
-			 struct iwl_rx_packet *pkt);
 
 /* tx queue */
 void iwlagn_set_wr_ptrs(struct iwl_priv *priv,
@@ -248,8 +246,6 @@ u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant_idx, u8 valid);
 /* rx */
 void iwl_rx_missed_beacon_notif(struct iwl_priv *priv,
 				struct iwl_rx_mem_buffer *rxb);
-bool iwl_good_plcp_health(struct iwl_priv *priv,
-			  struct iwl_rx_packet *pkt);
 void iwl_rx_statistics(struct iwl_priv *priv,
 		       struct iwl_rx_mem_buffer *rxb);
 void iwl_reply_statistics(struct iwl_priv *priv,
@@ -356,7 +352,7 @@ iwlagn_remove_notification(struct iwl_priv *priv,
 			   struct iwl_notification_wait *wait_entry);
 
 /* mac80211 handlers (for 4965) */
-int iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
+void iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
 int iwlagn_mac_start(struct ieee80211_hw *hw);
 void iwlagn_mac_stop(struct ieee80211_hw *hw);
 void iwlagn_configure_filter(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 0a1d4aeb36a..03cfb74da2b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -2477,7 +2477,7 @@ struct iwl_bt_cmd {
 					IWLAGN_BT_VALID_BT4_TIMES | \
 					IWLAGN_BT_VALID_3W_LUT)
 
-struct iwlagn_bt_cmd {
+struct iwl_basic_bt_cmd {
 	u8 flags;
 	u8 ledtime; /* unused */
 	u8 max_kill;
@@ -2490,6 +2490,10 @@ struct iwlagn_bt_cmd {
 	__le32 bt3_lookup_table[12];
 	__le16 bt4_decision_time; /* unused */
 	__le16 valid;
+};
+
+struct iwl6000_bt_cmd {
+	struct iwl_basic_bt_cmd basic;
 	u8 prio_boost;
 	/*
 	 * set IWLAGN_BT_VALID_BOOST to "1" in "valid" bitmask
@@ -2499,6 +2503,18 @@ struct iwlagn_bt_cmd {
 	__le16 rx_prio_boost;	/* SW boost of WiFi rx priority */
 };
 
+struct iwl2000_bt_cmd {
+	struct iwl_basic_bt_cmd basic;
+	__le32 prio_boost;
+	/*
+	 * set IWLAGN_BT_VALID_BOOST to "1" in "valid" bitmask
+	 * if configure the following patterns
+	 */
+	u8 reserved;
+	u8 tx_prio_boost;	/* SW boost of WiFi tx priority */
+	__le16 rx_prio_boost;	/* SW boost of WiFi rx priority */
+};
+
 #define IWLAGN_BT_SCO_ACTIVE	cpu_to_le32(BIT(0))
 
 struct iwlagn_bt_sco_cmd {
@@ -4150,6 +4166,10 @@ enum iwl_bt_coex_profile_traffic_load {
  */
 };
 
+#define BT_SESSION_ACTIVITY_1_UART_MSG		0x1
+#define BT_SESSION_ACTIVITY_2_UART_MSG		0x2
+
+/* BT UART message - Share Part (BT -> WiFi) */
 #define BT_UART_MSG_FRAME1MSGTYPE_POS		(0)
 #define BT_UART_MSG_FRAME1MSGTYPE_MSK		\
 		(0x7 << BT_UART_MSG_FRAME1MSGTYPE_POS)
@@ -4234,9 +4254,12 @@ enum iwl_bt_coex_profile_traffic_load {
 #define BT_UART_MSG_FRAME7SNIFFACTIVITY_POS	(0)
 #define BT_UART_MSG_FRAME7SNIFFACTIVITY_MSK	\
 		(0x7 << BT_UART_MSG_FRAME7SNIFFACTIVITY_POS)
-#define BT_UART_MSG_FRAME7INQUIRYPAGESRMODE_POS	(3)
-#define BT_UART_MSG_FRAME7INQUIRYPAGESRMODE_MSK	\
-		(0x3 << BT_UART_MSG_FRAME7INQUIRYPAGESRMODE_POS)
+#define BT_UART_MSG_FRAME7PAGE_POS		(3)
+#define BT_UART_MSG_FRAME7PAGE_MSK		\
+		(0x1 << BT_UART_MSG_FRAME7PAGE_POS)
+#define BT_UART_MSG_FRAME7INQUIRY_POS		(4)
+#define BT_UART_MSG_FRAME7INQUIRY_MSK		\
+		(0x1 << BT_UART_MSG_FRAME7INQUIRY_POS)
 #define BT_UART_MSG_FRAME7CONNECTABLE_POS	(5)
 #define BT_UART_MSG_FRAME7CONNECTABLE_MSK	\
 		(0x1 << BT_UART_MSG_FRAME7CONNECTABLE_POS)
@@ -4244,6 +4267,83 @@ enum iwl_bt_coex_profile_traffic_load {
 #define BT_UART_MSG_FRAME7RESERVED_MSK		\
 		(0x3 << BT_UART_MSG_FRAME7RESERVED_POS)
 
+/* BT Session Activity 2 UART message (BT -> WiFi) */
+#define BT_UART_MSG_2_FRAME1RESERVED1_POS	(5)
+#define BT_UART_MSG_2_FRAME1RESERVED1_MSK	\
+		(0x1<<BT_UART_MSG_2_FRAME1RESERVED1_POS)
+#define BT_UART_MSG_2_FRAME1RESERVED2_POS	(6)
+#define BT_UART_MSG_2_FRAME1RESERVED2_MSK	\
+		(0x3<<BT_UART_MSG_2_FRAME1RESERVED2_POS)
+
+#define BT_UART_MSG_2_FRAME2AGGTRAFFICLOAD_POS	(0)
+#define BT_UART_MSG_2_FRAME2AGGTRAFFICLOAD_MSK	\
+		(0x3F<<BT_UART_MSG_2_FRAME2AGGTRAFFICLOAD_POS)
+#define BT_UART_MSG_2_FRAME2RESERVED_POS	(6)
+#define BT_UART_MSG_2_FRAME2RESERVED_MSK	\
+		(0x3<<BT_UART_MSG_2_FRAME2RESERVED_POS)
+
+#define BT_UART_MSG_2_FRAME3BRLASTTXPOWER_POS	(0)
+#define BT_UART_MSG_2_FRAME3BRLASTTXPOWER_MSK	\
+		(0xF<<BT_UART_MSG_2_FRAME3BRLASTTXPOWER_POS)
+#define BT_UART_MSG_2_FRAME3INQPAGESRMODE_POS	(4)
+#define BT_UART_MSG_2_FRAME3INQPAGESRMODE_MSK	\
+		(0x1<<BT_UART_MSG_2_FRAME3INQPAGESRMODE_POS)
+#define BT_UART_MSG_2_FRAME3LEMASTER_POS	(5)
+#define BT_UART_MSG_2_FRAME3LEMASTER_MSK	\
+		(0x1<<BT_UART_MSG_2_FRAME3LEMASTER_POS)
+#define BT_UART_MSG_2_FRAME3RESERVED_POS	(6)
+#define BT_UART_MSG_2_FRAME3RESERVED_MSK	\
+		(0x3<<BT_UART_MSG_2_FRAME3RESERVED_POS)
+
+#define BT_UART_MSG_2_FRAME4LELASTTXPOWER_POS	(0)
+#define BT_UART_MSG_2_FRAME4LELASTTXPOWER_MSK	\
+		(0xF<<BT_UART_MSG_2_FRAME4LELASTTXPOWER_POS)
+#define BT_UART_MSG_2_FRAME4NUMLECONN_POS	(4)
+#define BT_UART_MSG_2_FRAME4NUMLECONN_MSK	\
+		(0x3<<BT_UART_MSG_2_FRAME4NUMLECONN_POS)
+#define BT_UART_MSG_2_FRAME4RESERVED_POS	(6)
+#define BT_UART_MSG_2_FRAME4RESERVED_MSK	\
+		(0x3<<BT_UART_MSG_2_FRAME4RESERVED_POS)
+
+#define BT_UART_MSG_2_FRAME5BTMINRSSI_POS	(0)
+#define BT_UART_MSG_2_FRAME5BTMINRSSI_MSK	\
+		(0xF<<BT_UART_MSG_2_FRAME5BTMINRSSI_POS)
+#define BT_UART_MSG_2_FRAME5LESCANINITMODE_POS	(4)
+#define BT_UART_MSG_2_FRAME5LESCANINITMODE_MSK	\
+		(0x1<<BT_UART_MSG_2_FRAME5LESCANINITMODE_POS)
+#define BT_UART_MSG_2_FRAME5LEADVERMODE_POS	(5)
+#define BT_UART_MSG_2_FRAME5LEADVERMODE_MSK	\
+		(0x1<<BT_UART_MSG_2_FRAME5LEADVERMODE_POS)
+#define BT_UART_MSG_2_FRAME5RESERVED_POS	(6)
+#define BT_UART_MSG_2_FRAME5RESERVED_MSK	\
+		(0x3<<BT_UART_MSG_2_FRAME5RESERVED_POS)
+
+#define BT_UART_MSG_2_FRAME6LECONNINTERVAL_POS	(0)
+#define BT_UART_MSG_2_FRAME6LECONNINTERVAL_MSK	\
+		(0x1F<<BT_UART_MSG_2_FRAME6LECONNINTERVAL_POS)
+#define BT_UART_MSG_2_FRAME6RFU_POS		(5)
+#define BT_UART_MSG_2_FRAME6RFU_MSK		\
+		(0x1<<BT_UART_MSG_2_FRAME6RFU_POS)
+#define BT_UART_MSG_2_FRAME6RESERVED_POS	(6)
+#define BT_UART_MSG_2_FRAME6RESERVED_MSK	\
+		(0x3<<BT_UART_MSG_2_FRAME6RESERVED_POS)
+
+#define BT_UART_MSG_2_FRAME7LECONNSLAVELAT_POS	(0)
+#define BT_UART_MSG_2_FRAME7LECONNSLAVELAT_MSK	\
+		(0x7<<BT_UART_MSG_2_FRAME7LECONNSLAVELAT_POS)
+#define BT_UART_MSG_2_FRAME7LEPROFILE1_POS	(3)
+#define BT_UART_MSG_2_FRAME7LEPROFILE1_MSK	\
+		(0x1<<BT_UART_MSG_2_FRAME7LEPROFILE1_POS)
+#define BT_UART_MSG_2_FRAME7LEPROFILE2_POS	(4)
+#define BT_UART_MSG_2_FRAME7LEPROFILE2_MSK	\
+		(0x1<<BT_UART_MSG_2_FRAME7LEPROFILE2_POS)
+#define BT_UART_MSG_2_FRAME7LEPROFILEOTHER_POS	(5)
+#define BT_UART_MSG_2_FRAME7LEPROFILEOTHER_MSK	\
+		(0x1<<BT_UART_MSG_2_FRAME7LEPROFILEOTHER_POS)
+#define BT_UART_MSG_2_FRAME7RESERVED_POS	(6)
+#define BT_UART_MSG_2_FRAME7RESERVED_MSK	\
+		(0x3<<BT_UART_MSG_2_FRAME7RESERVED_POS)
+
 
 struct iwl_bt_uart_msg {
 	u8 header;
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 4ad89389a0a..4bd34206025 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -43,11 +43,6 @@
 #include "iwl-helpers.h"
 
 
-MODULE_DESCRIPTION("iwl core");
-MODULE_VERSION(IWLWIFI_VERSION);
-MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
-MODULE_LICENSE("GPL");
-
 /*
  * set bt_coex_active to true, uCode will do kill/defer
  * every time the priority line is asserted (BT is sending signals on the
@@ -65,15 +60,12 @@ MODULE_LICENSE("GPL");
  * default: bt_coex_active = true (BT_COEX_ENABLE)
  */
 bool bt_coex_active = true;
-EXPORT_SYMBOL_GPL(bt_coex_active);
 module_param(bt_coex_active, bool, S_IRUGO);
 MODULE_PARM_DESC(bt_coex_active, "enable wifi/bluetooth co-exist");
 
 u32 iwl_debug_level;
-EXPORT_SYMBOL(iwl_debug_level);
 
 const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
-EXPORT_SYMBOL(iwl_bcast_addr);
 
 
 /* This function both allocates and initializes hw and priv. */
@@ -98,7 +90,6 @@ struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg)
 out:
 	return hw;
 }
-EXPORT_SYMBOL(iwl_alloc_all);
 
 #define MAX_BIT_RATE_40_MHZ 150 /* Mbps */
 #define MAX_BIT_RATE_20_MHZ 72 /* Mbps */
@@ -272,7 +263,6 @@ int iwlcore_init_geos(struct iwl_priv *priv)
 
 	return 0;
 }
-EXPORT_SYMBOL(iwlcore_init_geos);
 
 /*
  * iwlcore_free_geos - undo allocations in iwlcore_init_geos
@@ -283,7 +273,6 @@ void iwlcore_free_geos(struct iwl_priv *priv)
 	kfree(priv->ieee_rates);
 	clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
 }
-EXPORT_SYMBOL(iwlcore_free_geos);
 
 static bool iwl_is_channel_extension(struct iwl_priv *priv,
 				     enum ieee80211_band band,
@@ -328,7 +317,6 @@ bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv,
 			le16_to_cpu(ctx->staging.channel),
 			ctx->ht.extension_chan_offset);
 }
-EXPORT_SYMBOL(iwl_is_ht40_tx_allowed);
 
 static u16 iwl_adjust_beacon_interval(u16 beacon_val, u16 max_beacon_val)
 {
@@ -429,7 +417,6 @@ int iwl_send_rxon_timing(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
 	return iwl_send_cmd_pdu(priv, ctx->rxon_timing_cmd,
 				sizeof(ctx->timing), &ctx->timing);
 }
-EXPORT_SYMBOL(iwl_send_rxon_timing);
 
 void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
 			   int hw_decrypt)
@@ -442,7 +429,6 @@ void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
 		rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK;
 
 }
-EXPORT_SYMBOL(iwl_set_rxon_hwcrypto);
 
 /* validate RXON structure is valid */
 int iwl_check_rxon_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
@@ -515,7 +501,6 @@ int iwl_check_rxon_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
 	}
 	return 0;
 }
-EXPORT_SYMBOL(iwl_check_rxon_cmd);
 
 /**
  * iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
@@ -579,7 +564,6 @@ int iwl_full_rxon_required(struct iwl_priv *priv,
 
 	return 0;
 }
-EXPORT_SYMBOL(iwl_full_rxon_required);
 
 u8 iwl_rate_get_lowest_plcp(struct iwl_priv *priv,
 			    struct iwl_rxon_context *ctx)
@@ -593,7 +577,6 @@ u8 iwl_rate_get_lowest_plcp(struct iwl_priv *priv,
 	else
 		return IWL_RATE_6M_PLCP;
 }
-EXPORT_SYMBOL(iwl_rate_get_lowest_plcp);
 
 static void _iwl_set_rxon_ht(struct iwl_priv *priv,
 			     struct iwl_ht_config *ht_conf,
@@ -670,7 +653,6 @@ void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf)
 	for_each_context(priv, ctx)
 		_iwl_set_rxon_ht(priv, ht_conf, ctx);
 }
-EXPORT_SYMBOL(iwl_set_rxon_ht);
 
 /* Return valid, unused, channel for a passive scan to reset the RF */
 u8 iwl_get_single_channel_number(struct iwl_priv *priv,
@@ -711,7 +693,6 @@ u8 iwl_get_single_channel_number(struct iwl_priv *priv,
 
 	return channel;
 }
-EXPORT_SYMBOL(iwl_get_single_channel_number);
 
 /**
  * iwl_set_rxon_channel - Set the band and channel values in staging RXON
@@ -742,7 +723,6 @@ int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch,
 
 	return 0;
 }
-EXPORT_SYMBOL(iwl_set_rxon_channel);
 
 void iwl_set_flags_for_band(struct iwl_priv *priv,
 			    struct iwl_rxon_context *ctx,
@@ -766,7 +746,6 @@ void iwl_set_flags_for_band(struct iwl_priv *priv,
 		ctx->staging.flags &= ~RXON_FLG_CCK_MSK;
 	}
 }
-EXPORT_SYMBOL(iwl_set_flags_for_band);
 
 /*
  * initialize rxon structure with default values from eeprom
@@ -838,7 +817,6 @@ void iwl_connection_init_rx_config(struct iwl_priv *priv,
 	ctx->staging.ofdm_ht_dual_stream_basic_rates = 0xff;
 	ctx->staging.ofdm_ht_triple_stream_basic_rates = 0xff;
 }
-EXPORT_SYMBOL(iwl_connection_init_rx_config);
 
 void iwl_set_rate(struct iwl_priv *priv)
 {
@@ -871,7 +849,6 @@ void iwl_set_rate(struct iwl_priv *priv)
 		   (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
 	}
 }
-EXPORT_SYMBOL(iwl_set_rate);
 
 void iwl_chswitch_done(struct iwl_priv *priv, bool is_success)
 {
@@ -891,7 +868,6 @@ void iwl_chswitch_done(struct iwl_priv *priv, bool is_success)
 		mutex_unlock(&priv->mutex);
 	}
 }
-EXPORT_SYMBOL(iwl_chswitch_done);
 
 void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
 {
@@ -919,7 +895,6 @@ void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
 		}
 	}
 }
-EXPORT_SYMBOL(iwl_rx_csa);
 
 #ifdef CONFIG_IWLWIFI_DEBUG
 void iwl_print_rx_config_cmd(struct iwl_priv *priv,
@@ -941,13 +916,15 @@ void iwl_print_rx_config_cmd(struct iwl_priv *priv,
 	IWL_DEBUG_RADIO(priv, "u8[6] bssid_addr: %pM\n", rxon->bssid_addr);
 	IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id));
 }
-EXPORT_SYMBOL(iwl_print_rx_config_cmd);
 #endif
 /**
  * iwl_irq_handle_error - called for HW or SW error interrupt from card
  */
 void iwl_irq_handle_error(struct iwl_priv *priv)
 {
+	unsigned int reload_msec;
+	unsigned long reload_jiffies;
+
 	/* Set the FW error flag -- cleared on iwl_down */
 	set_bit(STATUS_FW_ERROR, &priv->status);
 
@@ -991,6 +968,25 @@ void iwl_irq_handle_error(struct iwl_priv *priv)
 	 * commands by clearing the INIT status bit */
 	clear_bit(STATUS_READY, &priv->status);
 
+	/*
+	 * If firmware keep reloading, then it indicate something
+	 * serious wrong and firmware having problem to recover
+	 * from it. Instead of keep trying which will fill the syslog
+	 * and hang the system, let's just stop it
+	 */
+	reload_jiffies = jiffies;
+	reload_msec = jiffies_to_msecs((long) reload_jiffies -
+				(long) priv->reload_jiffies);
+	priv->reload_jiffies = reload_jiffies;
+	if (reload_msec <= IWL_MIN_RELOAD_DURATION) {
+		priv->reload_count++;
+		if (priv->reload_count >= IWL_MAX_CONTINUE_RELOAD_CNT) {
+			IWL_ERR(priv, "BUG_ON, Stop restarting\n");
+			return;
+		}
+	} else
+		priv->reload_count = 0;
+
 	if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) {
 		IWL_DEBUG(priv, IWL_DL_FW_ERRORS,
 			  "Restarting adapter due to uCode error.\n");
@@ -999,7 +995,6 @@ void iwl_irq_handle_error(struct iwl_priv *priv)
 			queue_work(priv->workqueue, &priv->restart);
 	}
 }
-EXPORT_SYMBOL(iwl_irq_handle_error);
 
 static int iwl_apm_stop_master(struct iwl_priv *priv)
 {
@@ -1036,7 +1031,6 @@ void iwl_apm_stop(struct iwl_priv *priv)
 	 */
 	iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
 }
-EXPORT_SYMBOL(iwl_apm_stop);
 
 
 /*
@@ -1151,7 +1145,6 @@ int iwl_apm_init(struct iwl_priv *priv)
 out:
 	return ret;
 }
-EXPORT_SYMBOL(iwl_apm_init);
 
 
 int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
@@ -1211,7 +1204,6 @@ int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
 	}
 	return ret;
 }
-EXPORT_SYMBOL(iwl_set_tx_power);
 
 void iwl_send_bt_config(struct iwl_priv *priv)
 {
@@ -1235,7 +1227,6 @@ void iwl_send_bt_config(struct iwl_priv *priv)
 			     sizeof(struct iwl_bt_cmd), &bt_cmd))
 		IWL_ERR(priv, "failed to send BT Coex Config\n");
 }
-EXPORT_SYMBOL(iwl_send_bt_config);
 
 int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags, bool clear)
 {
@@ -1253,7 +1244,6 @@ int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags, bool clear)
 					sizeof(struct iwl_statistics_cmd),
 					&statistics_cmd);
 }
-EXPORT_SYMBOL(iwl_send_statistics_request);
 
 void iwl_rx_pm_sleep_notif(struct iwl_priv *priv,
 			   struct iwl_rx_mem_buffer *rxb)
@@ -1265,7 +1255,6 @@ void iwl_rx_pm_sleep_notif(struct iwl_priv *priv,
 		     sleep->pm_sleep_mode, sleep->pm_wakeup_src);
 #endif
 }
-EXPORT_SYMBOL(iwl_rx_pm_sleep_notif);
 
 void iwl_rx_pm_debug_statistics_notif(struct iwl_priv *priv,
 				      struct iwl_rx_mem_buffer *rxb)
@@ -1277,7 +1266,6 @@ void iwl_rx_pm_debug_statistics_notif(struct iwl_priv *priv,
 			get_cmd_string(pkt->hdr.cmd));
 	iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->u.raw, len);
 }
-EXPORT_SYMBOL(iwl_rx_pm_debug_statistics_notif);
 
 void iwl_rx_reply_error(struct iwl_priv *priv,
 			struct iwl_rx_mem_buffer *rxb)
@@ -1292,7 +1280,6 @@ void iwl_rx_reply_error(struct iwl_priv *priv,
 		le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num),
 		le32_to_cpu(pkt->u.err_resp.error_info));
 }
-EXPORT_SYMBOL(iwl_rx_reply_error);
 
 void iwl_clear_isr_stats(struct iwl_priv *priv)
 {
@@ -1344,7 +1331,6 @@ int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 	return 0;
 }
-EXPORT_SYMBOL(iwl_mac_conf_tx);
 
 int iwl_mac_tx_last_beacon(struct ieee80211_hw *hw)
 {
@@ -1352,7 +1338,6 @@ int iwl_mac_tx_last_beacon(struct ieee80211_hw *hw)
 
 	return priv->ibss_manager == IWL_IBSS_MANAGER;
 }
-EXPORT_SYMBOL_GPL(iwl_mac_tx_last_beacon);
 
 static int iwl_set_mode(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
 {
@@ -1462,7 +1447,6 @@ int iwl_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 	return err;
 }
-EXPORT_SYMBOL(iwl_mac_add_interface);
 
 static void iwl_teardown_interface(struct iwl_priv *priv,
 				   struct ieee80211_vif *vif,
@@ -1515,7 +1499,6 @@ void iwl_mac_remove_interface(struct ieee80211_hw *hw,
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 
 }
-EXPORT_SYMBOL(iwl_mac_remove_interface);
 
 int iwl_alloc_txq_mem(struct iwl_priv *priv)
 {
@@ -1530,14 +1513,12 @@ int iwl_alloc_txq_mem(struct iwl_priv *priv)
 	}
 	return 0;
 }
-EXPORT_SYMBOL(iwl_alloc_txq_mem);
 
 void iwl_free_txq_mem(struct iwl_priv *priv)
 {
 	kfree(priv->txq);
 	priv->txq = NULL;
 }
-EXPORT_SYMBOL(iwl_free_txq_mem);
 
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 
@@ -1576,7 +1557,6 @@ int iwl_alloc_traffic_mem(struct iwl_priv *priv)
 	iwl_reset_traffic_log(priv);
 	return 0;
 }
-EXPORT_SYMBOL(iwl_alloc_traffic_mem);
 
 void iwl_free_traffic_mem(struct iwl_priv *priv)
 {
@@ -1586,7 +1566,6 @@ void iwl_free_traffic_mem(struct iwl_priv *priv)
 	kfree(priv->rx_traffic);
 	priv->rx_traffic = NULL;
 }
-EXPORT_SYMBOL(iwl_free_traffic_mem);
 
 void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv,
 		      u16 length, struct ieee80211_hdr *header)
@@ -1611,7 +1590,6 @@ void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv,
 			(priv->tx_traffic_idx + 1) % IWL_TRAFFIC_ENTRIES;
 	}
 }
-EXPORT_SYMBOL(iwl_dbg_log_tx_data_frame);
 
 void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv,
 		      u16 length, struct ieee80211_hdr *header)
@@ -1636,7 +1614,6 @@ void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv,
 			(priv->rx_traffic_idx + 1) % IWL_TRAFFIC_ENTRIES;
 	}
 }
-EXPORT_SYMBOL(iwl_dbg_log_rx_data_frame);
 
 const char *get_mgmt_string(int cmd)
 {
@@ -1773,7 +1750,6 @@ void iwl_update_stats(struct iwl_priv *priv, bool is_tx, __le16 fc, u16 len)
 		stats->data_bytes += len;
 	}
 }
-EXPORT_SYMBOL(iwl_update_stats);
 #endif
 
 static void iwl_force_rf_reset(struct iwl_priv *priv)
@@ -1912,7 +1888,6 @@ int iwl_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	mutex_unlock(&priv->mutex);
 	return err;
 }
-EXPORT_SYMBOL(iwl_mac_change_interface);
 
 /*
  * On every watchdog tick we check (latest) time stamp. If it does not
@@ -1984,7 +1959,6 @@ void iwl_bg_watchdog(unsigned long data)
 	mod_timer(&priv->watchdog, jiffies +
 		  msecs_to_jiffies(IWL_WD_TICK(timeout)));
 }
-EXPORT_SYMBOL(iwl_bg_watchdog);
 
 void iwl_setup_watchdog(struct iwl_priv *priv)
 {
@@ -1996,7 +1970,6 @@ void iwl_setup_watchdog(struct iwl_priv *priv)
 	else
 		del_timer(&priv->watchdog);
 }
-EXPORT_SYMBOL(iwl_setup_watchdog);
 
 /*
  * extended beacon time format
@@ -2022,7 +1995,6 @@ u32 iwl_usecs_to_beacons(struct iwl_priv *priv, u32 usec, u32 beacon_interval)
 
 	return (quot << priv->hw_params.beacon_time_tsf_bits) + rem;
 }
-EXPORT_SYMBOL(iwl_usecs_to_beacons);
 
 /* base is usually what we get from ucode with each received frame,
  * the same as HW timer counter counting down
@@ -2050,7 +2022,6 @@ __le32 iwl_add_beacon_time(struct iwl_priv *priv, u32 base,
 
 	return cpu_to_le32(res);
 }
-EXPORT_SYMBOL(iwl_add_beacon_time);
 
 #ifdef CONFIG_PM
 
@@ -2070,7 +2041,6 @@ int iwl_pci_suspend(struct device *device)
 
 	return 0;
 }
-EXPORT_SYMBOL(iwl_pci_suspend);
 
 int iwl_pci_resume(struct device *device)
 {
@@ -2099,7 +2069,6 @@ int iwl_pci_resume(struct device *device)
 
 	return 0;
 }
-EXPORT_SYMBOL(iwl_pci_resume);
 
 const struct dev_pm_ops iwl_pm_ops = {
 	.suspend = iwl_pci_suspend,
@@ -2109,6 +2078,5 @@ const struct dev_pm_ops iwl_pm_ops = {
 	.poweroff = iwl_pci_suspend,
 	.restore = iwl_pci_resume,
 };
-EXPORT_SYMBOL(iwl_pm_ops);
 
 #endif /* CONFIG_PM */
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index e0ec17079dc..d47f3a87fce 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -210,12 +210,7 @@ struct iwl_lib_ops {
 
 	/* temperature */
 	struct iwl_temp_ops temp_ops;
-	/* check for plcp health */
-	bool (*check_plcp_health)(struct iwl_priv *priv,
-					struct iwl_rx_packet *pkt);
-	/* check for ack health */
-	bool (*check_ack_health)(struct iwl_priv *priv,
-					struct iwl_rx_packet *pkt);
+
 	int (*txfifo_flush)(struct iwl_priv *priv, u16 flush_control);
 	void (*dev_txfifo_flush)(struct iwl_priv *priv, u16 flush_control);
 
@@ -261,6 +256,8 @@ struct iwl_mod_params {
 	int amsdu_size_8K;	/* def: 1 = enable 8K amsdu size */
 	int antenna;  		/* def: 0 = both antennas (use diversity) */
 	int restart_fw;		/* def: 1 = restart firmware */
+	bool plcp_check;	/* def: true = enable plcp health check */
+	bool ack_check;		/* def: false = disable ack health check */
 };
 
 /*
@@ -339,6 +336,7 @@ struct iwl_bt_params {
 	u8 ampdu_factor;
 	u8 ampdu_density;
 	bool bt_sco_disable;
+	bool bt_session_2;
 };
 /*
  * @use_rts_for_aggregation: use rts/cts protection for HT traffic
@@ -509,6 +507,7 @@ void iwl_rx_reply_error(struct iwl_priv *priv,
 * RX
 ******************************************************/
 void iwl_cmd_queue_free(struct iwl_priv *priv);
+void iwl_cmd_queue_unmap(struct iwl_priv *priv);
 int iwl_rx_queue_alloc(struct iwl_priv *priv);
 void iwl_rx_queue_update_write_ptr(struct iwl_priv *priv,
 				  struct iwl_rx_queue *q);
@@ -517,8 +516,6 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb);
 /* Handlers */
 void iwl_rx_spectrum_measure_notif(struct iwl_priv *priv,
 					  struct iwl_rx_mem_buffer *rxb);
-void iwl_recover_from_statistics(struct iwl_priv *priv,
-				struct iwl_rx_packet *pkt);
 void iwl_chswitch_done(struct iwl_priv *priv, bool is_success);
 void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb);
 
@@ -533,6 +530,7 @@ int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq,
 void iwl_tx_queue_reset(struct iwl_priv *priv, struct iwl_tx_queue *txq,
 			int slots_num, u32 txq_id);
 void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id);
+void iwl_tx_queue_unmap(struct iwl_priv *priv, int txq_id);
 void iwl_setup_watchdog(struct iwl_priv *priv);
 /*****************************************************
  * TX power
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index bc7a965c18f..8842411f1cf 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -1788,7 +1788,6 @@ err:
 	iwl_dbgfs_unregister(priv);
 	return -ENOMEM;
 }
-EXPORT_SYMBOL(iwl_dbgfs_register);
 
 /**
  * Remove the debugfs files and directories
@@ -1802,7 +1801,6 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv)
 	debugfs_remove_recursive(priv->debugfs_dir);
 	priv->debugfs_dir = NULL;
 }
-EXPORT_SYMBOL(iwl_dbgfs_unregister);
 
 
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index ecfbef40278..58165c769cf 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -43,14 +43,14 @@
 #include "iwl-prph.h"
 #include "iwl-fh.h"
 #include "iwl-debug.h"
-#include "iwl-4965-hw.h"
-#include "iwl-3945-hw.h"
 #include "iwl-agn-hw.h"
 #include "iwl-led.h"
 #include "iwl-power.h"
 #include "iwl-agn-rs.h"
 #include "iwl-agn-tt.h"
 
+#define U32_PAD(n)		((4-(n))&0x3)
+
 struct iwl_tx_queue;
 
 /* CT-KILL constants */
@@ -1110,6 +1110,11 @@ struct iwl_event_log {
 /* BT Antenna Coupling Threshold (dB) */
 #define IWL_BT_ANTENNA_COUPLING_THRESHOLD	(35)
 
+/* Firmware reload counter and Timestamp */
+#define IWL_MIN_RELOAD_DURATION		1000 /* 1000 ms */
+#define IWL_MAX_CONTINUE_RELOAD_CNT	4
+
+
 enum iwl_reset {
 	IWL_RF_RESET = 0,
 	IWL_FW_RESET,
@@ -1262,6 +1267,10 @@ struct iwl_priv {
 	/* force reset */
 	struct iwl_force_reset force_reset[IWL_MAX_FORCE_RESET];
 
+	/* firmware reload counter and timestamp */
+	unsigned long reload_jiffies;
+	int reload_count;
+
 	/* we allocate array of iwl_channel_info for NIC's valid channels.
 	 *    Access via channel # using indirect index array */
 	struct iwl_channel_info *channel_info;	/* channel info array */
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index 358cfd7e5af..833194a2c63 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -222,7 +222,6 @@ const u8 *iwlcore_eeprom_query_addr(const struct iwl_priv *priv, size_t offset)
 	BUG_ON(offset >= priv->cfg->base_params->eeprom_size);
 	return &priv->eeprom[offset];
 }
-EXPORT_SYMBOL(iwlcore_eeprom_query_addr);
 
 static int iwl_init_otp_access(struct iwl_priv *priv)
 {
@@ -382,7 +381,6 @@ const u8 *iwl_eeprom_query_addr(const struct iwl_priv *priv, size_t offset)
 {
 	return priv->cfg->ops->lib->eeprom_ops.query_addr(priv, offset);
 }
-EXPORT_SYMBOL(iwl_eeprom_query_addr);
 
 u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset)
 {
@@ -390,7 +388,6 @@ u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset)
 		return 0;
 	return (u16)priv->eeprom[offset] | ((u16)priv->eeprom[offset + 1] << 8);
 }
-EXPORT_SYMBOL(iwl_eeprom_query16);
 
 /**
  * iwl_eeprom_init - read EEPROM contents
@@ -509,14 +506,12 @@ err:
 alloc_err:
 	return ret;
 }
-EXPORT_SYMBOL(iwl_eeprom_init);
 
 void iwl_eeprom_free(struct iwl_priv *priv)
 {
 	kfree(priv->eeprom);
 	priv->eeprom = NULL;
 }
-EXPORT_SYMBOL(iwl_eeprom_free);
 
 static void iwl_init_band_reference(const struct iwl_priv *priv,
 			int eep_band, int *eeprom_ch_count,
@@ -779,7 +774,6 @@ int iwl_init_channel_map(struct iwl_priv *priv)
 
 	return 0;
 }
-EXPORT_SYMBOL(iwl_init_channel_map);
 
 /*
  * iwl_free_channel_map - undo allocations in iwl_init_channel_map
@@ -789,7 +783,6 @@ void iwl_free_channel_map(struct iwl_priv *priv)
 	kfree(priv->channel_info);
 	priv->channel_count = 0;
 }
-EXPORT_SYMBOL(iwl_free_channel_map);
 
 /**
  * iwl_get_channel_info - Find driver's private channel info
@@ -818,4 +811,3 @@ const struct iwl_channel_info *iwl_get_channel_info(const struct iwl_priv *priv,
 
 	return NULL;
 }
-EXPORT_SYMBOL(iwl_get_channel_info);
diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
index e4b953d7b7b..02499f68468 100644
--- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
@@ -114,7 +114,6 @@ const char *get_cmd_string(u8 cmd)
 
 	}
 }
-EXPORT_SYMBOL(get_cmd_string);
 
 #define HOST_COMPLETE_TIMEOUT (HZ / 2)
 
@@ -253,7 +252,6 @@ out:
 	mutex_unlock(&priv->sync_cmd_mutex);
 	return ret;
 }
-EXPORT_SYMBOL(iwl_send_cmd_sync);
 
 int iwl_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 {
@@ -262,7 +260,6 @@ int iwl_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 
 	return iwl_send_cmd_sync(priv, cmd);
 }
-EXPORT_SYMBOL(iwl_send_cmd);
 
 int iwl_send_cmd_pdu(struct iwl_priv *priv, u8 id, u16 len, const void *data)
 {
@@ -274,7 +271,6 @@ int iwl_send_cmd_pdu(struct iwl_priv *priv, u8 id, u16 len, const void *data)
 
 	return iwl_send_cmd_sync(priv, &cmd);
 }
-EXPORT_SYMBOL(iwl_send_cmd_pdu);
 
 int iwl_send_cmd_pdu_async(struct iwl_priv *priv,
 			   u8 id, u16 len, const void *data,
@@ -293,4 +289,3 @@ int iwl_send_cmd_pdu_async(struct iwl_priv *priv,
 
 	return iwl_send_cmd_async(priv, &cmd);
 }
-EXPORT_SYMBOL(iwl_send_cmd_pdu_async);
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c
index 074ad227522..d7f2a0bb32c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-led.c
@@ -175,7 +175,6 @@ void iwl_leds_init(struct iwl_priv *priv)
 
 	priv->led_registered = true;
 }
-EXPORT_SYMBOL(iwl_leds_init);
 
 void iwl_leds_exit(struct iwl_priv *priv)
 {
@@ -185,4 +184,3 @@ void iwl_leds_exit(struct iwl_priv *priv)
 	led_classdev_unregister(&priv->led);
 	kfree(priv->led.name);
 }
-EXPORT_SYMBOL(iwl_leds_exit);
diff --git a/drivers/net/wireless/iwlwifi/iwl-legacy.c b/drivers/net/wireless/iwlwifi/iwl-legacy.c
deleted file mode 100644
index e1ace3ce30b..00000000000
--- a/drivers/net/wireless/iwlwifi/iwl-legacy.c
+++ /dev/null
@@ -1,657 +0,0 @@
-/******************************************************************************
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <net/mac80211.h>
-
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-helpers.h"
-#include "iwl-legacy.h"
-
-static void iwl_update_qos(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
-{
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	if (!ctx->is_active)
-		return;
-
-	ctx->qos_data.def_qos_parm.qos_flags = 0;
-
-	if (ctx->qos_data.qos_active)
-		ctx->qos_data.def_qos_parm.qos_flags |=
-			QOS_PARAM_FLG_UPDATE_EDCA_MSK;
-
-	if (ctx->ht.enabled)
-		ctx->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK;
-
-	IWL_DEBUG_QOS(priv, "send QoS cmd with Qos active=%d FLAGS=0x%X\n",
-		      ctx->qos_data.qos_active,
-		      ctx->qos_data.def_qos_parm.qos_flags);
-
-	iwl_send_cmd_pdu_async(priv, ctx->qos_cmd,
-			       sizeof(struct iwl_qosparam_cmd),
-			       &ctx->qos_data.def_qos_parm, NULL);
-}
-
-/**
- * iwl_legacy_mac_config - mac80211 config callback
- */
-int iwl_legacy_mac_config(struct ieee80211_hw *hw, u32 changed)
-{
-	struct iwl_priv *priv = hw->priv;
-	const struct iwl_channel_info *ch_info;
-	struct ieee80211_conf *conf = &hw->conf;
-	struct ieee80211_channel *channel = conf->channel;
-	struct iwl_ht_config *ht_conf = &priv->current_ht_config;
-	struct iwl_rxon_context *ctx;
-	unsigned long flags = 0;
-	int ret = 0;
-	u16 ch;
-	int scan_active = 0;
-	bool ht_changed[NUM_IWL_RXON_CTX] = {};
-
-	if (WARN_ON(!priv->cfg->ops->legacy))
-		return -EOPNOTSUPP;
-
-	mutex_lock(&priv->mutex);
-
-	IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n",
-					channel->hw_value, changed);
-
-	if (unlikely(test_bit(STATUS_SCANNING, &priv->status))) {
-		scan_active = 1;
-		IWL_DEBUG_MAC80211(priv, "scan active\n");
-	}
-
-	if (changed & (IEEE80211_CONF_CHANGE_SMPS |
-		       IEEE80211_CONF_CHANGE_CHANNEL)) {
-		/* mac80211 uses static for non-HT which is what we want */
-		priv->current_ht_config.smps = conf->smps_mode;
-
-		/*
-		 * Recalculate chain counts.
-		 *
-		 * If monitor mode is enabled then mac80211 will
-		 * set up the SM PS mode to OFF if an HT channel is
-		 * configured.
-		 */
-		if (priv->cfg->ops->hcmd->set_rxon_chain)
-			for_each_context(priv, ctx)
-				priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
-	}
-
-	/* during scanning mac80211 will delay channel setting until
-	 * scan finish with changed = 0
-	 */
-	if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) {
-		if (scan_active)
-			goto set_ch_out;
-
-		ch = channel->hw_value;
-		ch_info = iwl_get_channel_info(priv, channel->band, ch);
-		if (!is_channel_valid(ch_info)) {
-			IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
-			ret = -EINVAL;
-			goto set_ch_out;
-		}
-
-		spin_lock_irqsave(&priv->lock, flags);
-
-		for_each_context(priv, ctx) {
-			/* Configure HT40 channels */
-			if (ctx->ht.enabled != conf_is_ht(conf)) {
-				ctx->ht.enabled = conf_is_ht(conf);
-				ht_changed[ctx->ctxid] = true;
-			}
-			if (ctx->ht.enabled) {
-				if (conf_is_ht40_minus(conf)) {
-					ctx->ht.extension_chan_offset =
-						IEEE80211_HT_PARAM_CHA_SEC_BELOW;
-					ctx->ht.is_40mhz = true;
-				} else if (conf_is_ht40_plus(conf)) {
-					ctx->ht.extension_chan_offset =
-						IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
-					ctx->ht.is_40mhz = true;
-				} else {
-					ctx->ht.extension_chan_offset =
-						IEEE80211_HT_PARAM_CHA_SEC_NONE;
-					ctx->ht.is_40mhz = false;
-				}
-			} else
-				ctx->ht.is_40mhz = false;
-
-			/*
-			 * Default to no protection. Protection mode will
-			 * later be set from BSS config in iwl_ht_conf
-			 */
-			ctx->ht.protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE;
-
-			/* if we are switching from ht to 2.4 clear flags
-			 * from any ht related info since 2.4 does not
-			 * support ht */
-			if ((le16_to_cpu(ctx->staging.channel) != ch))
-				ctx->staging.flags = 0;
-
-			iwl_set_rxon_channel(priv, channel, ctx);
-			iwl_set_rxon_ht(priv, ht_conf);
-
-			iwl_set_flags_for_band(priv, ctx, channel->band,
-					       ctx->vif);
-		}
-
-		spin_unlock_irqrestore(&priv->lock, flags);
-
-		if (priv->cfg->ops->legacy->update_bcast_stations)
-			ret = priv->cfg->ops->legacy->update_bcast_stations(priv);
-
- set_ch_out:
-		/* The list of supported rates and rate mask can be different
-		 * for each band; since the band may have changed, reset
-		 * the rate mask to what mac80211 lists */
-		iwl_set_rate(priv);
-	}
-
-	if (changed & (IEEE80211_CONF_CHANGE_PS |
-			IEEE80211_CONF_CHANGE_IDLE)) {
-		ret = iwl_power_update_mode(priv, false);
-		if (ret)
-			IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n");
-	}
-
-	if (changed & IEEE80211_CONF_CHANGE_POWER) {
-		IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
-			priv->tx_power_user_lmt, conf->power_level);
-
-		iwl_set_tx_power(priv, conf->power_level, false);
-	}
-
-	if (!iwl_is_ready(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
-		goto out;
-	}
-
-	if (scan_active)
-		goto out;
-
-	for_each_context(priv, ctx) {
-		if (memcmp(&ctx->active, &ctx->staging, sizeof(ctx->staging)))
-			iwlcore_commit_rxon(priv, ctx);
-		else
-			IWL_DEBUG_INFO(priv,
-				"Not re-sending same RXON configuration.\n");
-		if (ht_changed[ctx->ctxid])
-			iwl_update_qos(priv, ctx);
-	}
-
-out:
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	mutex_unlock(&priv->mutex);
-	return ret;
-}
-EXPORT_SYMBOL(iwl_legacy_mac_config);
-
-void iwl_legacy_mac_reset_tsf(struct ieee80211_hw *hw)
-{
-	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-	/* IBSS can only be the IWL_RXON_CTX_BSS context */
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
-	if (WARN_ON(!priv->cfg->ops->legacy))
-		return;
-
-	mutex_lock(&priv->mutex);
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	spin_lock_irqsave(&priv->lock, flags);
-	memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_config));
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	/* new association get rid of ibss beacon skb */
-	if (priv->beacon_skb)
-		dev_kfree_skb(priv->beacon_skb);
-
-	priv->beacon_skb = NULL;
-
-	priv->timestamp = 0;
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	iwl_scan_cancel_timeout(priv, 100);
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
-		mutex_unlock(&priv->mutex);
-		return;
-	}
-
-	/* we are restarting association process
-	 * clear RXON_FILTER_ASSOC_MSK bit
-	 */
-	ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-	iwlcore_commit_rxon(priv, ctx);
-
-	iwl_set_rate(priv);
-
-	mutex_unlock(&priv->mutex);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-}
-EXPORT_SYMBOL(iwl_legacy_mac_reset_tsf);
-
-static void iwl_ht_conf(struct iwl_priv *priv,
-			struct ieee80211_vif *vif)
-{
-	struct iwl_ht_config *ht_conf = &priv->current_ht_config;
-	struct ieee80211_sta *sta;
-	struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
-	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
-
-	IWL_DEBUG_ASSOC(priv, "enter:\n");
-
-	if (!ctx->ht.enabled)
-		return;
-
-	ctx->ht.protection =
-		bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_PROTECTION;
-	ctx->ht.non_gf_sta_present =
-		!!(bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
-
-	ht_conf->single_chain_sufficient = false;
-
-	switch (vif->type) {
-	case NL80211_IFTYPE_STATION:
-		rcu_read_lock();
-		sta = ieee80211_find_sta(vif, bss_conf->bssid);
-		if (sta) {
-			struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
-			int maxstreams;
-
-			maxstreams = (ht_cap->mcs.tx_params &
-				      IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK)
-					>> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
-			maxstreams += 1;
-
-			if ((ht_cap->mcs.rx_mask[1] == 0) &&
-			    (ht_cap->mcs.rx_mask[2] == 0))
-				ht_conf->single_chain_sufficient = true;
-			if (maxstreams <= 1)
-				ht_conf->single_chain_sufficient = true;
-		} else {
-			/*
-			 * If at all, this can only happen through a race
-			 * when the AP disconnects us while we're still
-			 * setting up the connection, in that case mac80211
-			 * will soon tell us about that.
-			 */
-			ht_conf->single_chain_sufficient = true;
-		}
-		rcu_read_unlock();
-		break;
-	case NL80211_IFTYPE_ADHOC:
-		ht_conf->single_chain_sufficient = true;
-		break;
-	default:
-		break;
-	}
-
-	IWL_DEBUG_ASSOC(priv, "leave\n");
-}
-
-static inline void iwl_set_no_assoc(struct iwl_priv *priv,
-				    struct ieee80211_vif *vif)
-{
-	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
-
-	/*
-	 * inform the ucode that there is no longer an
-	 * association and that no more packets should be
-	 * sent
-	 */
-	ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-	ctx->staging.assoc_id = 0;
-	iwlcore_commit_rxon(priv, ctx);
-}
-
-static void iwlcore_beacon_update(struct ieee80211_hw *hw,
-				  struct ieee80211_vif *vif)
-{
-	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-	__le64 timestamp;
-	struct sk_buff *skb = ieee80211_beacon_get(hw, vif);
-
-	if (!skb)
-		return;
-
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	lockdep_assert_held(&priv->mutex);
-
-	if (!priv->beacon_ctx) {
-		IWL_ERR(priv, "update beacon but no beacon context!\n");
-		dev_kfree_skb(skb);
-		return;
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	if (priv->beacon_skb)
-		dev_kfree_skb(priv->beacon_skb);
-
-	priv->beacon_skb = skb;
-
-	timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
-	priv->timestamp = le64_to_cpu(timestamp);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
-		return;
-	}
-
-	priv->cfg->ops->legacy->post_associate(priv);
-}
-
-void iwl_legacy_mac_bss_info_changed(struct ieee80211_hw *hw,
-				     struct ieee80211_vif *vif,
-				     struct ieee80211_bss_conf *bss_conf,
-				     u32 changes)
-{
-	struct iwl_priv *priv = hw->priv;
-	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
-	int ret;
-
-	if (WARN_ON(!priv->cfg->ops->legacy))
-		return;
-
-	IWL_DEBUG_MAC80211(priv, "changes = 0x%X\n", changes);
-
-	if (!iwl_is_alive(priv))
-		return;
-
-	mutex_lock(&priv->mutex);
-
-	if (changes & BSS_CHANGED_QOS) {
-		unsigned long flags;
-
-		spin_lock_irqsave(&priv->lock, flags);
-		ctx->qos_data.qos_active = bss_conf->qos;
-		iwl_update_qos(priv, ctx);
-		spin_unlock_irqrestore(&priv->lock, flags);
-	}
-
-	if (changes & BSS_CHANGED_BEACON_ENABLED) {
-		/*
-		 * the add_interface code must make sure we only ever
-		 * have a single interface that could be beaconing at
-		 * any time.
-		 */
-		if (vif->bss_conf.enable_beacon)
-			priv->beacon_ctx = ctx;
-		else
-			priv->beacon_ctx = NULL;
-	}
-
-	if (changes & BSS_CHANGED_BEACON && vif->type == NL80211_IFTYPE_AP) {
-		dev_kfree_skb(priv->beacon_skb);
-		priv->beacon_skb = ieee80211_beacon_get(hw, vif);
-	}
-
-	if (changes & BSS_CHANGED_BEACON_INT && vif->type == NL80211_IFTYPE_AP)
-		iwl_send_rxon_timing(priv, ctx);
-
-	if (changes & BSS_CHANGED_BSSID) {
-		IWL_DEBUG_MAC80211(priv, "BSSID %pM\n", bss_conf->bssid);
-
-		/*
-		 * If there is currently a HW scan going on in the
-		 * background then we need to cancel it else the RXON
-		 * below/in post_associate will fail.
-		 */
-		if (iwl_scan_cancel_timeout(priv, 100)) {
-			IWL_WARN(priv, "Aborted scan still in progress after 100ms\n");
-			IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
-			mutex_unlock(&priv->mutex);
-			return;
-		}
-
-		/* mac80211 only sets assoc when in STATION mode */
-		if (vif->type == NL80211_IFTYPE_ADHOC || bss_conf->assoc) {
-			memcpy(ctx->staging.bssid_addr,
-			       bss_conf->bssid, ETH_ALEN);
-
-			/* currently needed in a few places */
-			memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
-		} else {
-			ctx->staging.filter_flags &=
-				~RXON_FILTER_ASSOC_MSK;
-		}
-
-	}
-
-	/*
-	 * This needs to be after setting the BSSID in case
-	 * mac80211 decides to do both changes at once because
-	 * it will invoke post_associate.
-	 */
-	if (vif->type == NL80211_IFTYPE_ADHOC && changes & BSS_CHANGED_BEACON)
-		iwlcore_beacon_update(hw, vif);
-
-	if (changes & BSS_CHANGED_ERP_PREAMBLE) {
-		IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n",
-				   bss_conf->use_short_preamble);
-		if (bss_conf->use_short_preamble)
-			ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
-		else
-			ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
-	}
-
-	if (changes & BSS_CHANGED_ERP_CTS_PROT) {
-		IWL_DEBUG_MAC80211(priv, "ERP_CTS %d\n", bss_conf->use_cts_prot);
-		if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
-			ctx->staging.flags |= RXON_FLG_TGG_PROTECT_MSK;
-		else
-			ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
-		if (bss_conf->use_cts_prot)
-			ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
-		else
-			ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN;
-	}
-
-	if (changes & BSS_CHANGED_BASIC_RATES) {
-		/* XXX use this information
-		 *
-		 * To do that, remove code from iwl_set_rate() and put something
-		 * like this here:
-		 *
-		if (A-band)
-			ctx->staging.ofdm_basic_rates =
-				bss_conf->basic_rates;
-		else
-			ctx->staging.ofdm_basic_rates =
-				bss_conf->basic_rates >> 4;
-			ctx->staging.cck_basic_rates =
-				bss_conf->basic_rates & 0xF;
-		 */
-	}
-
-	if (changes & BSS_CHANGED_HT) {
-		iwl_ht_conf(priv, vif);
-
-		if (priv->cfg->ops->hcmd->set_rxon_chain)
-			priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
-	}
-
-	if (changes & BSS_CHANGED_ASSOC) {
-		IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc);
-		if (bss_conf->assoc) {
-			priv->timestamp = bss_conf->timestamp;
-
-			if (!iwl_is_rfkill(priv))
-				priv->cfg->ops->legacy->post_associate(priv);
-		} else
-			iwl_set_no_assoc(priv, vif);
-	}
-
-	if (changes && iwl_is_associated_ctx(ctx) && bss_conf->aid) {
-		IWL_DEBUG_MAC80211(priv, "Changes (%#x) while associated\n",
-				   changes);
-		ret = iwl_send_rxon_assoc(priv, ctx);
-		if (!ret) {
-			/* Sync active_rxon with latest change. */
-			memcpy((void *)&ctx->active,
-				&ctx->staging,
-				sizeof(struct iwl_rxon_cmd));
-		}
-	}
-
-	if (changes & BSS_CHANGED_BEACON_ENABLED) {
-		if (vif->bss_conf.enable_beacon) {
-			memcpy(ctx->staging.bssid_addr,
-			       bss_conf->bssid, ETH_ALEN);
-			memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
-			priv->cfg->ops->legacy->config_ap(priv);
-		} else
-			iwl_set_no_assoc(priv, vif);
-	}
-
-	if (changes & BSS_CHANGED_IBSS) {
-		ret = priv->cfg->ops->legacy->manage_ibss_station(priv, vif,
-							bss_conf->ibss_joined);
-		if (ret)
-			IWL_ERR(priv, "failed to %s IBSS station %pM\n",
-				bss_conf->ibss_joined ? "add" : "remove",
-				bss_conf->bssid);
-	}
-
-	mutex_unlock(&priv->mutex);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-}
-EXPORT_SYMBOL(iwl_legacy_mac_bss_info_changed);
-
-irqreturn_t iwl_isr_legacy(int irq, void *data)
-{
-	struct iwl_priv *priv = data;
-	u32 inta, inta_mask;
-	u32 inta_fh;
-	unsigned long flags;
-	if (!priv)
-		return IRQ_NONE;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	/* Disable (but don't clear!) interrupts here to avoid
-	 *    back-to-back ISRs and sporadic interrupts from our NIC.
-	 * If we have something to service, the tasklet will re-enable ints.
-	 * If we *don't* have something, we'll re-enable before leaving here. */
-	inta_mask = iwl_read32(priv, CSR_INT_MASK);  /* just for debug */
-	iwl_write32(priv, CSR_INT_MASK, 0x00000000);
-
-	/* Discover which interrupts are active/pending */
-	inta = iwl_read32(priv, CSR_INT);
-	inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
-
-	/* Ignore interrupt if there's nothing in NIC to service.
-	 * This may be due to IRQ shared with another device,
-	 * or due to sporadic interrupts thrown from our NIC. */
-	if (!inta && !inta_fh) {
-		IWL_DEBUG_ISR(priv,
-			"Ignore interrupt, inta == 0, inta_fh == 0\n");
-		goto none;
-	}
-
-	if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
-		/* Hardware disappeared. It might have already raised
-		 * an interrupt */
-		IWL_WARN(priv, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
-		goto unplugged;
-	}
-
-	IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
-		      inta, inta_mask, inta_fh);
-
-	inta &= ~CSR_INT_BIT_SCD;
-
-	/* iwl_irq_tasklet() will service interrupts and re-enable them */
-	if (likely(inta || inta_fh))
-		tasklet_schedule(&priv->irq_tasklet);
-
-unplugged:
-	spin_unlock_irqrestore(&priv->lock, flags);
-	return IRQ_HANDLED;
-
-none:
-	/* re-enable interrupts here since we don't have anything to service. */
-	/* only Re-enable if disabled by irq */
-	if (test_bit(STATUS_INT_ENABLED, &priv->status))
-		iwl_enable_interrupts(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-	return IRQ_NONE;
-}
-EXPORT_SYMBOL(iwl_isr_legacy);
-
-/*
- *  iwl_legacy_tx_cmd_protection: Set rts/cts. 3945 and 4965 only share this
- *  function.
- */
-void iwl_legacy_tx_cmd_protection(struct iwl_priv *priv,
-			       struct ieee80211_tx_info *info,
-			       __le16 fc, __le32 *tx_flags)
-{
-	if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
-		*tx_flags |= TX_CMD_FLG_RTS_MSK;
-		*tx_flags &= ~TX_CMD_FLG_CTS_MSK;
-		*tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
-
-		if (!ieee80211_is_mgmt(fc))
-			return;
-
-		switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
-		case cpu_to_le16(IEEE80211_STYPE_AUTH):
-		case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
-		case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ):
-		case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ):
-			*tx_flags &= ~TX_CMD_FLG_RTS_MSK;
-			*tx_flags |= TX_CMD_FLG_CTS_MSK;
-			break;
-		}
-	} else if (info->control.rates[0].flags &
-		   IEEE80211_TX_RC_USE_CTS_PROTECT) {
-		*tx_flags &= ~TX_CMD_FLG_RTS_MSK;
-		*tx_flags |= TX_CMD_FLG_CTS_MSK;
-		*tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
-	}
-}
-EXPORT_SYMBOL(iwl_legacy_tx_cmd_protection);
diff --git a/drivers/net/wireless/iwlwifi/iwl-legacy.h b/drivers/net/wireless/iwlwifi/iwl-legacy.h
deleted file mode 100644
index 9f7b2f93596..00000000000
--- a/drivers/net/wireless/iwlwifi/iwl-legacy.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *  * Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *  * Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *  * Neither the name Intel Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *****************************************************************************/
-
-#ifndef __iwl_legacy_h__
-#define __iwl_legacy_h__
-
-/* mac80211 handlers */
-int iwl_legacy_mac_config(struct ieee80211_hw *hw, u32 changed);
-void iwl_legacy_mac_reset_tsf(struct ieee80211_hw *hw);
-void iwl_legacy_mac_bss_info_changed(struct ieee80211_hw *hw,
-				     struct ieee80211_vif *vif,
-				     struct ieee80211_bss_conf *bss_conf,
-				     u32 changes);
-void iwl_legacy_tx_cmd_protection(struct iwl_priv *priv,
-				struct ieee80211_tx_info *info,
-				__le16 fc, __le32 *tx_flags);
-
-irqreturn_t iwl_isr_legacy(int irq, void *data);
-
-#endif /* __iwl_legacy_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index 1d1bf3234d8..576795e2c75 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -425,7 +425,6 @@ int iwl_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd,
 
 	return ret;
 }
-EXPORT_SYMBOL(iwl_power_set_mode);
 
 int iwl_power_update_mode(struct iwl_priv *priv, bool force)
 {
@@ -434,7 +433,6 @@ int iwl_power_update_mode(struct iwl_priv *priv, bool force)
 	iwl_power_build_cmd(priv, &cmd);
 	return iwl_power_set_mode(priv, &cmd, force);
 }
-EXPORT_SYMBOL(iwl_power_update_mode);
 
 /* initialize to default */
 void iwl_power_initialize(struct iwl_priv *priv)
@@ -448,4 +446,3 @@ void iwl_power_initialize(struct iwl_priv *priv)
 	memset(&priv->power_data.sleep_cmd, 0,
 		sizeof(priv->power_data.sleep_cmd));
 }
-EXPORT_SYMBOL(iwl_power_initialize);
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index bc89393fb69..566e2d979ce 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -37,6 +37,7 @@
 #include "iwl-sta.h"
 #include "iwl-io.h"
 #include "iwl-helpers.h"
+#include "iwl-agn-calib.h"
 /************************** RX-FUNCTIONS ****************************/
 /*
  * Rx theory of operation
@@ -118,7 +119,6 @@ int iwl_rx_queue_space(const struct iwl_rx_queue *q)
 		s = 0;
 	return s;
 }
-EXPORT_SYMBOL(iwl_rx_queue_space);
 
 /**
  * iwl_rx_queue_update_write_ptr - Update the write pointer for the RX queue
@@ -170,7 +170,6 @@ void iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl_rx_queue *q
  exit_unlock:
 	spin_unlock_irqrestore(&q->lock, flags);
 }
-EXPORT_SYMBOL(iwl_rx_queue_update_write_ptr);
 
 int iwl_rx_queue_alloc(struct iwl_priv *priv)
 {
@@ -211,8 +210,6 @@ err_rb:
 err_bd:
 	return -ENOMEM;
 }
-EXPORT_SYMBOL(iwl_rx_queue_alloc);
-
 
 void iwl_rx_spectrum_measure_notif(struct iwl_priv *priv,
 					  struct iwl_rx_mem_buffer *rxb)
@@ -229,27 +226,397 @@ void iwl_rx_spectrum_measure_notif(struct iwl_priv *priv,
 	memcpy(&priv->measure_report, report, sizeof(*report));
 	priv->measurement_status |= MEASUREMENT_READY;
 }
-EXPORT_SYMBOL(iwl_rx_spectrum_measure_notif);
 
-void iwl_recover_from_statistics(struct iwl_priv *priv,
-				struct iwl_rx_packet *pkt)
+/* the threshold ratio of actual_ack_cnt to expected_ack_cnt in percent */
+#define ACK_CNT_RATIO (50)
+#define BA_TIMEOUT_CNT (5)
+#define BA_TIMEOUT_MAX (16)
+
+/**
+ * iwl_good_ack_health - checks for ACK count ratios, BA timeout retries.
+ *
+ * When the ACK count ratio is low and aggregated BA timeout retries exceeding
+ * the BA_TIMEOUT_MAX, reload firmware and bring system back to normal
+ * operation state.
+ */
+static bool iwl_good_ack_health(struct iwl_priv *priv, struct iwl_rx_packet *pkt)
+{
+	int actual_delta, expected_delta, ba_timeout_delta;
+	struct statistics_tx *cur, *old;
+
+	if (priv->_agn.agg_tids_count)
+		return true;
+
+	if (iwl_bt_statistics(priv)) {
+		cur = &pkt->u.stats_bt.tx;
+		old = &priv->_agn.statistics_bt.tx;
+	} else {
+		cur = &pkt->u.stats.tx;
+		old = &priv->_agn.statistics.tx;
+	}
+
+	actual_delta = le32_to_cpu(cur->actual_ack_cnt) -
+		       le32_to_cpu(old->actual_ack_cnt);
+	expected_delta = le32_to_cpu(cur->expected_ack_cnt) -
+			 le32_to_cpu(old->expected_ack_cnt);
+
+	/* Values should not be negative, but we do not trust the firmware */
+	if (actual_delta <= 0 || expected_delta <= 0)
+		return true;
+
+	ba_timeout_delta = le32_to_cpu(cur->agg.ba_timeout) -
+			   le32_to_cpu(old->agg.ba_timeout);
+
+	if ((actual_delta * 100 / expected_delta) < ACK_CNT_RATIO &&
+	    ba_timeout_delta > BA_TIMEOUT_CNT) {
+		IWL_DEBUG_RADIO(priv, "deltas: actual %d expected %d ba_timeout %d\n",
+				actual_delta, expected_delta, ba_timeout_delta);
+
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+		/*
+		 * This is ifdef'ed on DEBUGFS because otherwise the
+		 * statistics aren't available. If DEBUGFS is set but
+		 * DEBUG is not, these will just compile out.
+		 */
+		IWL_DEBUG_RADIO(priv, "rx_detected_cnt delta %d\n",
+				priv->_agn.delta_statistics.tx.rx_detected_cnt);
+		IWL_DEBUG_RADIO(priv,
+				"ack_or_ba_timeout_collision delta %d\n",
+				priv->_agn.delta_statistics.tx.ack_or_ba_timeout_collision);
+#endif
+
+		if (ba_timeout_delta >= BA_TIMEOUT_MAX)
+			return false;
+	}
+
+	return true;
+}
+
+/**
+ * iwl_good_plcp_health - checks for plcp error.
+ *
+ * When the plcp error is exceeding the thresholds, reset the radio
+ * to improve the throughput.
+ */
+static bool iwl_good_plcp_health(struct iwl_priv *priv, struct iwl_rx_packet *pkt)
 {
+	bool rc = true;
+	int combined_plcp_delta;
+	unsigned int plcp_msec;
+	unsigned long plcp_received_jiffies;
+
+	if (priv->cfg->base_params->plcp_delta_threshold ==
+	    IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE) {
+		IWL_DEBUG_RADIO(priv, "plcp_err check disabled\n");
+		return rc;
+	}
+
+	/*
+	 * check for plcp_err and trigger radio reset if it exceeds
+	 * the plcp error threshold plcp_delta.
+	 */
+	plcp_received_jiffies = jiffies;
+	plcp_msec = jiffies_to_msecs((long) plcp_received_jiffies -
+					(long) priv->plcp_jiffies);
+	priv->plcp_jiffies = plcp_received_jiffies;
+	/*
+	 * check to make sure plcp_msec is not 0 to prevent division
+	 * by zero.
+	 */
+	if (plcp_msec) {
+		struct statistics_rx_phy *ofdm;
+		struct statistics_rx_ht_phy *ofdm_ht;
+
+		if (iwl_bt_statistics(priv)) {
+			ofdm = &pkt->u.stats_bt.rx.ofdm;
+			ofdm_ht = &pkt->u.stats_bt.rx.ofdm_ht;
+			combined_plcp_delta =
+			   (le32_to_cpu(ofdm->plcp_err) -
+			   le32_to_cpu(priv->_agn.statistics_bt.
+				       rx.ofdm.plcp_err)) +
+			   (le32_to_cpu(ofdm_ht->plcp_err) -
+			   le32_to_cpu(priv->_agn.statistics_bt.
+				       rx.ofdm_ht.plcp_err));
+		} else {
+			ofdm = &pkt->u.stats.rx.ofdm;
+			ofdm_ht = &pkt->u.stats.rx.ofdm_ht;
+			combined_plcp_delta =
+			    (le32_to_cpu(ofdm->plcp_err) -
+			    le32_to_cpu(priv->_agn.statistics.
+					rx.ofdm.plcp_err)) +
+			    (le32_to_cpu(ofdm_ht->plcp_err) -
+			    le32_to_cpu(priv->_agn.statistics.
+					rx.ofdm_ht.plcp_err));
+		}
+
+		if ((combined_plcp_delta > 0) &&
+		    ((combined_plcp_delta * 100) / plcp_msec) >
+			priv->cfg->base_params->plcp_delta_threshold) {
+			/*
+			 * if plcp_err exceed the threshold,
+			 * the following data is printed in csv format:
+			 *    Text: plcp_err exceeded %d,
+			 *    Received ofdm.plcp_err,
+			 *    Current ofdm.plcp_err,
+			 *    Received ofdm_ht.plcp_err,
+			 *    Current ofdm_ht.plcp_err,
+			 *    combined_plcp_delta,
+			 *    plcp_msec
+			 */
+			IWL_DEBUG_RADIO(priv, "plcp_err exceeded %u, "
+				"%u, %u, %u, %u, %d, %u mSecs\n",
+				priv->cfg->base_params->plcp_delta_threshold,
+				le32_to_cpu(ofdm->plcp_err),
+				le32_to_cpu(ofdm->plcp_err),
+				le32_to_cpu(ofdm_ht->plcp_err),
+				le32_to_cpu(ofdm_ht->plcp_err),
+				combined_plcp_delta, plcp_msec);
+
+			rc = false;
+		}
+	}
+	return rc;
+}
+
+static void iwl_recover_from_statistics(struct iwl_priv *priv, struct iwl_rx_packet *pkt)
+{
+	const struct iwl_mod_params *mod_params = priv->cfg->mod_params;
+
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
 	    !iwl_is_any_associated(priv))
 		return;
 
-	if (priv->cfg->ops->lib->check_ack_health &&
-	    !priv->cfg->ops->lib->check_ack_health(priv, pkt)) {
+	if (mod_params->ack_check && !iwl_good_ack_health(priv, pkt)) {
 		IWL_ERR(priv, "low ack count detected, restart firmware\n");
 		if (!iwl_force_reset(priv, IWL_FW_RESET, false))
 			return;
 	}
 
-	if (priv->cfg->ops->lib->check_plcp_health &&
-	    !priv->cfg->ops->lib->check_plcp_health(priv, pkt))
+	if (mod_params->plcp_check && !iwl_good_plcp_health(priv, pkt))
 		iwl_force_reset(priv, IWL_RF_RESET, false);
 }
-EXPORT_SYMBOL(iwl_recover_from_statistics);
+
+/* Calculate noise level, based on measurements during network silence just
+ *   before arriving beacon.  This measurement can be done only if we know
+ *   exactly when to expect beacons, therefore only when we're associated. */
+static void iwl_rx_calc_noise(struct iwl_priv *priv)
+{
+	struct statistics_rx_non_phy *rx_info;
+	int num_active_rx = 0;
+	int total_silence = 0;
+	int bcn_silence_a, bcn_silence_b, bcn_silence_c;
+	int last_rx_noise;
+
+	if (iwl_bt_statistics(priv))
+		rx_info = &(priv->_agn.statistics_bt.rx.general.common);
+	else
+		rx_info = &(priv->_agn.statistics.rx.general);
+	bcn_silence_a =
+		le32_to_cpu(rx_info->beacon_silence_rssi_a) & IN_BAND_FILTER;
+	bcn_silence_b =
+		le32_to_cpu(rx_info->beacon_silence_rssi_b) & IN_BAND_FILTER;
+	bcn_silence_c =
+		le32_to_cpu(rx_info->beacon_silence_rssi_c) & IN_BAND_FILTER;
+
+	if (bcn_silence_a) {
+		total_silence += bcn_silence_a;
+		num_active_rx++;
+	}
+	if (bcn_silence_b) {
+		total_silence += bcn_silence_b;
+		num_active_rx++;
+	}
+	if (bcn_silence_c) {
+		total_silence += bcn_silence_c;
+		num_active_rx++;
+	}
+
+	/* Average among active antennas */
+	if (num_active_rx)
+		last_rx_noise = (total_silence / num_active_rx) - 107;
+	else
+		last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
+
+	IWL_DEBUG_CALIB(priv, "inband silence a %u, b %u, c %u, dBm %d\n",
+			bcn_silence_a, bcn_silence_b, bcn_silence_c,
+			last_rx_noise);
+}
+
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+/*
+ *  based on the assumption of all statistics counter are in DWORD
+ *  FIXME: This function is for debugging, do not deal with
+ *  the case of counters roll-over.
+ */
+static void iwl_accumulative_statistics(struct iwl_priv *priv,
+					__le32 *stats)
+{
+	int i, size;
+	__le32 *prev_stats;
+	u32 *accum_stats;
+	u32 *delta, *max_delta;
+	struct statistics_general_common *general, *accum_general;
+	struct statistics_tx *tx, *accum_tx;
+
+	if (iwl_bt_statistics(priv)) {
+		prev_stats = (__le32 *)&priv->_agn.statistics_bt;
+		accum_stats = (u32 *)&priv->_agn.accum_statistics_bt;
+		size = sizeof(struct iwl_bt_notif_statistics);
+		general = &priv->_agn.statistics_bt.general.common;
+		accum_general = &priv->_agn.accum_statistics_bt.general.common;
+		tx = &priv->_agn.statistics_bt.tx;
+		accum_tx = &priv->_agn.accum_statistics_bt.tx;
+		delta = (u32 *)&priv->_agn.delta_statistics_bt;
+		max_delta = (u32 *)&priv->_agn.max_delta_bt;
+	} else {
+		prev_stats = (__le32 *)&priv->_agn.statistics;
+		accum_stats = (u32 *)&priv->_agn.accum_statistics;
+		size = sizeof(struct iwl_notif_statistics);
+		general = &priv->_agn.statistics.general.common;
+		accum_general = &priv->_agn.accum_statistics.general.common;
+		tx = &priv->_agn.statistics.tx;
+		accum_tx = &priv->_agn.accum_statistics.tx;
+		delta = (u32 *)&priv->_agn.delta_statistics;
+		max_delta = (u32 *)&priv->_agn.max_delta;
+	}
+	for (i = sizeof(__le32); i < size;
+	     i += sizeof(__le32), stats++, prev_stats++, delta++,
+	     max_delta++, accum_stats++) {
+		if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) {
+			*delta = (le32_to_cpu(*stats) -
+				le32_to_cpu(*prev_stats));
+			*accum_stats += *delta;
+			if (*delta > *max_delta)
+				*max_delta = *delta;
+		}
+	}
+
+	/* reset accumulative statistics for "no-counter" type statistics */
+	accum_general->temperature = general->temperature;
+	accum_general->temperature_m = general->temperature_m;
+	accum_general->ttl_timestamp = general->ttl_timestamp;
+	accum_tx->tx_power.ant_a = tx->tx_power.ant_a;
+	accum_tx->tx_power.ant_b = tx->tx_power.ant_b;
+	accum_tx->tx_power.ant_c = tx->tx_power.ant_c;
+}
+#endif
+
+#define REG_RECALIB_PERIOD (60)
+
+void iwl_rx_statistics(struct iwl_priv *priv,
+			      struct iwl_rx_mem_buffer *rxb)
+{
+	int change;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+
+	if (iwl_bt_statistics(priv)) {
+		IWL_DEBUG_RX(priv,
+			     "Statistics notification received (%d vs %d).\n",
+			     (int)sizeof(struct iwl_bt_notif_statistics),
+			     le32_to_cpu(pkt->len_n_flags) &
+			     FH_RSCSR_FRAME_SIZE_MSK);
+
+		change = ((priv->_agn.statistics_bt.general.common.temperature !=
+			   pkt->u.stats_bt.general.common.temperature) ||
+			   ((priv->_agn.statistics_bt.flag &
+			   STATISTICS_REPLY_FLG_HT40_MODE_MSK) !=
+			   (pkt->u.stats_bt.flag &
+			   STATISTICS_REPLY_FLG_HT40_MODE_MSK)));
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+		iwl_accumulative_statistics(priv, (__le32 *)&pkt->u.stats_bt);
+#endif
+
+	} else {
+		IWL_DEBUG_RX(priv,
+			     "Statistics notification received (%d vs %d).\n",
+			     (int)sizeof(struct iwl_notif_statistics),
+			     le32_to_cpu(pkt->len_n_flags) &
+			     FH_RSCSR_FRAME_SIZE_MSK);
+
+		change = ((priv->_agn.statistics.general.common.temperature !=
+			   pkt->u.stats.general.common.temperature) ||
+			   ((priv->_agn.statistics.flag &
+			   STATISTICS_REPLY_FLG_HT40_MODE_MSK) !=
+			   (pkt->u.stats.flag &
+			   STATISTICS_REPLY_FLG_HT40_MODE_MSK)));
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+		iwl_accumulative_statistics(priv, (__le32 *)&pkt->u.stats);
+#endif
+
+	}
+
+	iwl_recover_from_statistics(priv, pkt);
+
+	if (iwl_bt_statistics(priv))
+		memcpy(&priv->_agn.statistics_bt, &pkt->u.stats_bt,
+			sizeof(priv->_agn.statistics_bt));
+	else
+		memcpy(&priv->_agn.statistics, &pkt->u.stats,
+			sizeof(priv->_agn.statistics));
+
+	set_bit(STATUS_STATISTICS, &priv->status);
+
+	/* Reschedule the statistics timer to occur in
+	 * REG_RECALIB_PERIOD seconds to ensure we get a
+	 * thermal update even if the uCode doesn't give
+	 * us one */
+	mod_timer(&priv->statistics_periodic, jiffies +
+		  msecs_to_jiffies(REG_RECALIB_PERIOD * 1000));
+
+	if (unlikely(!test_bit(STATUS_SCANNING, &priv->status)) &&
+	    (pkt->hdr.cmd == STATISTICS_NOTIFICATION)) {
+		iwl_rx_calc_noise(priv);
+		queue_work(priv->workqueue, &priv->run_time_calib_work);
+	}
+	if (priv->cfg->ops->lib->temp_ops.temperature && change)
+		priv->cfg->ops->lib->temp_ops.temperature(priv);
+}
+
+void iwl_reply_statistics(struct iwl_priv *priv,
+			      struct iwl_rx_mem_buffer *rxb)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+
+	if (le32_to_cpu(pkt->u.stats.flag) & UCODE_STATISTICS_CLEAR_MSK) {
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+		memset(&priv->_agn.accum_statistics, 0,
+			sizeof(struct iwl_notif_statistics));
+		memset(&priv->_agn.delta_statistics, 0,
+			sizeof(struct iwl_notif_statistics));
+		memset(&priv->_agn.max_delta, 0,
+			sizeof(struct iwl_notif_statistics));
+		memset(&priv->_agn.accum_statistics_bt, 0,
+			sizeof(struct iwl_bt_notif_statistics));
+		memset(&priv->_agn.delta_statistics_bt, 0,
+			sizeof(struct iwl_bt_notif_statistics));
+		memset(&priv->_agn.max_delta_bt, 0,
+			sizeof(struct iwl_bt_notif_statistics));
+#endif
+		IWL_DEBUG_RX(priv, "Statistics have been cleared\n");
+	}
+	iwl_rx_statistics(priv, rxb);
+}
+
+void iwl_rx_missed_beacon_notif(struct iwl_priv *priv,
+				struct iwl_rx_mem_buffer *rxb)
+
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+	struct iwl_missed_beacon_notif *missed_beacon;
+
+	missed_beacon = &pkt->u.missed_beacon;
+	if (le32_to_cpu(missed_beacon->consecutive_missed_beacons) >
+	    priv->missed_beacon_threshold) {
+		IWL_DEBUG_CALIB(priv,
+		    "missed bcn cnsq %d totl %d rcd %d expctd %d\n",
+		    le32_to_cpu(missed_beacon->consecutive_missed_beacons),
+		    le32_to_cpu(missed_beacon->total_missed_becons),
+		    le32_to_cpu(missed_beacon->num_recvd_beacons),
+		    le32_to_cpu(missed_beacon->num_expected_beacons));
+		if (!test_bit(STATUS_SCANNING, &priv->status))
+			iwl_init_sensitivity(priv);
+	}
+}
 
 /*
  * returns non-zero if packet should be dropped
@@ -302,4 +669,3 @@ int iwl_set_decrypted_flag(struct iwl_priv *priv,
 	}
 	return 0;
 }
-EXPORT_SYMBOL(iwl_set_decrypted_flag);
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 08f1bea8b65..faa6d34cb65 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -155,7 +155,6 @@ int iwl_scan_cancel(struct iwl_priv *priv)
 	queue_work(priv->workqueue, &priv->abort_scan);
 	return 0;
 }
-EXPORT_SYMBOL(iwl_scan_cancel);
 
 /**
  * iwl_scan_cancel_timeout - Cancel any currently executing HW scan
@@ -180,7 +179,6 @@ int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms)
 
 	return test_bit(STATUS_SCAN_HW, &priv->status);
 }
-EXPORT_SYMBOL(iwl_scan_cancel_timeout);
 
 /* Service response to REPLY_SCAN_CMD (0x80) */
 static void iwl_rx_reply_scan(struct iwl_priv *priv,
@@ -288,7 +286,6 @@ void iwl_setup_rx_scan_handlers(struct iwl_priv *priv)
 	priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] =
 					iwl_rx_scan_complete_notif;
 }
-EXPORT_SYMBOL(iwl_setup_rx_scan_handlers);
 
 inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
 				     enum ieee80211_band band,
@@ -301,7 +298,6 @@ inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
 		return IWL_ACTIVE_DWELL_TIME_24 +
 			IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1);
 }
-EXPORT_SYMBOL(iwl_get_active_dwell_time);
 
 u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
 			       enum ieee80211_band band,
@@ -333,7 +329,6 @@ u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
 
 	return passive;
 }
-EXPORT_SYMBOL(iwl_get_passive_dwell_time);
 
 void iwl_init_scan_params(struct iwl_priv *priv)
 {
@@ -343,7 +338,6 @@ void iwl_init_scan_params(struct iwl_priv *priv)
 	if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ])
 		priv->scan_tx_ant[IEEE80211_BAND_2GHZ] = ant_idx;
 }
-EXPORT_SYMBOL(iwl_init_scan_params);
 
 static int __must_check iwl_scan_initiate(struct iwl_priv *priv,
 					  struct ieee80211_vif *vif,
@@ -439,7 +433,6 @@ out_unlock:
 
 	return ret;
 }
-EXPORT_SYMBOL(iwl_mac_hw_scan);
 
 /*
  * internal short scan, this function should only been called while associated.
@@ -536,7 +529,6 @@ u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
 
 	return (u16)len;
 }
-EXPORT_SYMBOL(iwl_fill_probe_req);
 
 static void iwl_bg_abort_scan(struct work_struct *work)
 {
@@ -621,7 +613,6 @@ void iwl_setup_scan_deferred_work(struct iwl_priv *priv)
 	INIT_WORK(&priv->start_internal_scan, iwl_bg_start_internal_scan);
 	INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check);
 }
-EXPORT_SYMBOL(iwl_setup_scan_deferred_work);
 
 void iwl_cancel_scan_deferred_work(struct iwl_priv *priv)
 {
@@ -635,4 +626,3 @@ void iwl_cancel_scan_deferred_work(struct iwl_priv *priv)
 		mutex_unlock(&priv->mutex);
 	}
 }
-EXPORT_SYMBOL(iwl_cancel_scan_deferred_work);
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 49493d17651..bc90a12408a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -169,7 +169,6 @@ int iwl_send_add_sta(struct iwl_priv *priv,
 
 	return ret;
 }
-EXPORT_SYMBOL(iwl_send_add_sta);
 
 static void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index,
 				   struct ieee80211_sta *sta,
@@ -316,7 +315,6 @@ u8 iwl_prep_station(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
 	return sta_id;
 
 }
-EXPORT_SYMBOL_GPL(iwl_prep_station);
 
 #define STA_WAIT_TIMEOUT (HZ/2)
 
@@ -379,7 +377,6 @@ int iwl_add_station_common(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
 	*sta_id_r = sta_id;
 	return ret;
 }
-EXPORT_SYMBOL(iwl_add_station_common);
 
 /**
  * iwl_sta_ucode_deactivate - deactivate ucode status for a station
@@ -513,7 +510,6 @@ out_err:
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 	return -EINVAL;
 }
-EXPORT_SYMBOL_GPL(iwl_remove_station);
 
 /**
  * iwl_clear_ucode_stations - clear ucode station table bits
@@ -548,7 +544,6 @@ void iwl_clear_ucode_stations(struct iwl_priv *priv,
 	if (!cleared)
 		IWL_DEBUG_INFO(priv, "No active stations found to be cleared\n");
 }
-EXPORT_SYMBOL(iwl_clear_ucode_stations);
 
 /**
  * iwl_restore_stations() - Restore driver known stations to device
@@ -625,7 +620,6 @@ void iwl_restore_stations(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
 	else
 		IWL_DEBUG_INFO(priv, "Restoring all known stations .... complete.\n");
 }
-EXPORT_SYMBOL(iwl_restore_stations);
 
 void iwl_reprogram_ap_sta(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
 {
@@ -668,7 +662,6 @@ void iwl_reprogram_ap_sta(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
 			priv->stations[sta_id].sta.sta.addr, ret);
 	iwl_send_lq_cmd(priv, ctx, &lq, CMD_SYNC, true);
 }
-EXPORT_SYMBOL(iwl_reprogram_ap_sta);
 
 int iwl_get_free_ucode_key_index(struct iwl_priv *priv)
 {
@@ -680,7 +673,6 @@ int iwl_get_free_ucode_key_index(struct iwl_priv *priv)
 
 	return WEP_INVALID_OFFSET;
 }
-EXPORT_SYMBOL(iwl_get_free_ucode_key_index);
 
 void iwl_dealloc_bcast_stations(struct iwl_priv *priv)
 {
@@ -700,7 +692,6 @@ void iwl_dealloc_bcast_stations(struct iwl_priv *priv)
 	}
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 }
-EXPORT_SYMBOL_GPL(iwl_dealloc_bcast_stations);
 
 #ifdef CONFIG_IWLWIFI_DEBUG
 static void iwl_dump_lq_cmd(struct iwl_priv *priv,
@@ -810,7 +801,6 @@ int iwl_send_lq_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
 	}
 	return ret;
 }
-EXPORT_SYMBOL(iwl_send_lq_cmd);
 
 int iwl_mac_sta_remove(struct ieee80211_hw *hw,
 		       struct ieee80211_vif *vif,
@@ -832,4 +822,3 @@ int iwl_mac_sta_remove(struct ieee80211_hw *hw,
 	mutex_unlock(&priv->mutex);
 	return ret;
 }
-EXPORT_SYMBOL(iwl_mac_sta_remove);
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 073b6ce6141..277c9175dcf 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -84,7 +84,23 @@ void iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq)
 	}
 	txq->need_update = 0;
 }
-EXPORT_SYMBOL(iwl_txq_update_write_ptr);
+
+/**
+ * iwl_tx_queue_unmap -  Unmap any remaining DMA mappings and free skb's
+ */
+void iwl_tx_queue_unmap(struct iwl_priv *priv, int txq_id)
+{
+	struct iwl_tx_queue *txq = &priv->txq[txq_id];
+	struct iwl_queue *q = &txq->q;
+
+	if (q->n_bd == 0)
+		return;
+
+	 while (q->write_ptr != q->read_ptr) {
+		priv->cfg->ops->lib->txq_free_tfd(priv, txq);
+		q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd);
+	}
+}
 
 /**
  * iwl_tx_queue_free - Deallocate DMA queue.
@@ -97,17 +113,10 @@ EXPORT_SYMBOL(iwl_txq_update_write_ptr);
 void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id)
 {
 	struct iwl_tx_queue *txq = &priv->txq[txq_id];
-	struct iwl_queue *q = &txq->q;
 	struct device *dev = &priv->pci_dev->dev;
 	int i;
 
-	if (q->n_bd == 0)
-		return;
-
-	/* first, empty all BD's */
-	for (; q->write_ptr != q->read_ptr;
-	     q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd))
-		priv->cfg->ops->lib->txq_free_tfd(priv, txq);
+	iwl_tx_queue_unmap(priv, txq_id);
 
 	/* De-alloc array of command/tx buffers */
 	for (i = 0; i < TFD_TX_CMD_SLOTS; i++)
@@ -131,42 +140,35 @@ void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id)
 	/* 0-fill queue descriptor structure */
 	memset(txq, 0, sizeof(*txq));
 }
-EXPORT_SYMBOL(iwl_tx_queue_free);
 
 /**
- * iwl_cmd_queue_free - Deallocate DMA queue.
- * @txq: Transmit queue to deallocate.
- *
- * Empty queue by removing and destroying all BD's.
- * Free all buffers.
- * 0-fill, but do not free "txq" descriptor structure.
+ * iwl_cmd_queue_unmap - Unmap any remaining DMA mappings from command queue
  */
-void iwl_cmd_queue_free(struct iwl_priv *priv)
+void iwl_cmd_queue_unmap(struct iwl_priv *priv)
 {
 	struct iwl_tx_queue *txq = &priv->txq[priv->cmd_queue];
 	struct iwl_queue *q = &txq->q;
-	struct device *dev = &priv->pci_dev->dev;
 	int i;
 	bool huge = false;
 
 	if (q->n_bd == 0)
 		return;
 
-	for (; q->read_ptr != q->write_ptr;
-	     q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
+	while (q->read_ptr != q->write_ptr) {
 		/* we have no way to tell if it is a huge cmd ATM */
 		i = get_cmd_index(q, q->read_ptr, 0);
 
-		if (txq->meta[i].flags & CMD_SIZE_HUGE) {
+		if (txq->meta[i].flags & CMD_SIZE_HUGE)
 			huge = true;
-			continue;
-		}
+		else
+			pci_unmap_single(priv->pci_dev,
+					 dma_unmap_addr(&txq->meta[i], mapping),
+					 dma_unmap_len(&txq->meta[i], len),
+					 PCI_DMA_BIDIRECTIONAL);
 
-		pci_unmap_single(priv->pci_dev,
-				 dma_unmap_addr(&txq->meta[i], mapping),
-				 dma_unmap_len(&txq->meta[i], len),
-				 PCI_DMA_BIDIRECTIONAL);
+	     q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd);
 	}
+
 	if (huge) {
 		i = q->n_window;
 		pci_unmap_single(priv->pci_dev,
@@ -174,6 +176,23 @@ void iwl_cmd_queue_free(struct iwl_priv *priv)
 				 dma_unmap_len(&txq->meta[i], len),
 				 PCI_DMA_BIDIRECTIONAL);
 	}
+}
+
+/**
+ * iwl_cmd_queue_free - Deallocate DMA queue.
+ * @txq: Transmit queue to deallocate.
+ *
+ * Empty queue by removing and destroying all BD's.
+ * Free all buffers.
+ * 0-fill, but do not free "txq" descriptor structure.
+ */
+void iwl_cmd_queue_free(struct iwl_priv *priv)
+{
+	struct iwl_tx_queue *txq = &priv->txq[priv->cmd_queue];
+	struct device *dev = &priv->pci_dev->dev;
+	int i;
+
+	iwl_cmd_queue_unmap(priv);
 
 	/* De-alloc array of command/tx buffers */
 	for (i = 0; i <= TFD_CMD_SLOTS; i++)
@@ -193,7 +212,6 @@ void iwl_cmd_queue_free(struct iwl_priv *priv)
 	/* 0-fill queue descriptor structure */
 	memset(txq, 0, sizeof(*txq));
 }
-EXPORT_SYMBOL(iwl_cmd_queue_free);
 
 /*************** DMA-QUEUE-GENERAL-FUNCTIONS  *****
  * DMA services
@@ -233,7 +251,6 @@ int iwl_queue_space(const struct iwl_queue *q)
 		s = 0;
 	return s;
 }
-EXPORT_SYMBOL(iwl_queue_space);
 
 
 /**
@@ -384,7 +401,6 @@ out_free_arrays:
 
 	return -ENOMEM;
 }
-EXPORT_SYMBOL(iwl_tx_queue_init);
 
 void iwl_tx_queue_reset(struct iwl_priv *priv, struct iwl_tx_queue *txq,
 			int slots_num, u32 txq_id)
@@ -404,7 +420,6 @@ void iwl_tx_queue_reset(struct iwl_priv *priv, struct iwl_tx_queue *txq,
 	/* Tell device where to find queue */
 	priv->cfg->ops->lib->txq_init(priv, txq);
 }
-EXPORT_SYMBOL(iwl_tx_queue_reset);
 
 /*************** HOST COMMAND QUEUE FUNCTIONS   *****/
 
@@ -641,4 +656,3 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
 	}
 	meta->flags = 0;
 }
-EXPORT_SYMBOL(iwl_tx_cmd_complete);
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
deleted file mode 100644
index adcef735180..00000000000
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ /dev/null
@@ -1,4334 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
- *
- * Portions of this file are derived from the ipw3945 project, as well
- * as portions of the ieee80211 subsystem header files.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- *  Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/pci-aspm.h>
-#include <linux/slab.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-#include <linux/firmware.h>
-#include <linux/etherdevice.h>
-#include <linux/if_arp.h>
-
-#include <net/ieee80211_radiotap.h>
-#include <net/mac80211.h>
-
-#include <asm/div64.h>
-
-#define DRV_NAME	"iwl3945"
-
-#include "iwl-fh.h"
-#include "iwl-3945-fh.h"
-#include "iwl-commands.h"
-#include "iwl-sta.h"
-#include "iwl-3945.h"
-#include "iwl-core.h"
-#include "iwl-helpers.h"
-#include "iwl-dev.h"
-#include "iwl-spectrum.h"
-#include "iwl-legacy.h"
-
-/*
- * module name, copyright, version, etc.
- */
-
-#define DRV_DESCRIPTION	\
-"Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-#define VD "d"
-#else
-#define VD
-#endif
-
-/*
- * add "s" to indicate spectrum measurement included.
- * we add it here to be consistent with previous releases in which
- * this was configurable.
- */
-#define DRV_VERSION  IWLWIFI_VERSION VD "s"
-#define DRV_COPYRIGHT	"Copyright(c) 2003-2010 Intel Corporation"
-#define DRV_AUTHOR     "<ilw@linux.intel.com>"
-
-MODULE_DESCRIPTION(DRV_DESCRIPTION);
-MODULE_VERSION(DRV_VERSION);
-MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
-MODULE_LICENSE("GPL");
-
- /* module parameters */
-struct iwl_mod_params iwl3945_mod_params = {
-	.sw_crypto = 1,
-	.restart_fw = 1,
-	/* the rest are 0 by default */
-};
-
-/**
- * iwl3945_get_antenna_flags - Get antenna flags for RXON command
- * @priv: eeprom and antenna fields are used to determine antenna flags
- *
- * priv->eeprom39  is used to determine if antenna AUX/MAIN are reversed
- * iwl3945_mod_params.antenna specifies the antenna diversity mode:
- *
- * IWL_ANTENNA_DIVERSITY - NIC selects best antenna by itself
- * IWL_ANTENNA_MAIN      - Force MAIN antenna
- * IWL_ANTENNA_AUX       - Force AUX antenna
- */
-__le32 iwl3945_get_antenna_flags(const struct iwl_priv *priv)
-{
-	struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
-
-	switch (iwl3945_mod_params.antenna) {
-	case IWL_ANTENNA_DIVERSITY:
-		return 0;
-
-	case IWL_ANTENNA_MAIN:
-		if (eeprom->antenna_switch_type)
-			return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
-		return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
-
-	case IWL_ANTENNA_AUX:
-		if (eeprom->antenna_switch_type)
-			return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
-		return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
-	}
-
-	/* bad antenna selector value */
-	IWL_ERR(priv, "Bad antenna selector value (0x%x)\n",
-		iwl3945_mod_params.antenna);
-
-	return 0;		/* "diversity" is default if error */
-}
-
-static int iwl3945_set_ccmp_dynamic_key_info(struct iwl_priv *priv,
-				   struct ieee80211_key_conf *keyconf,
-				   u8 sta_id)
-{
-	unsigned long flags;
-	__le16 key_flags = 0;
-	int ret;
-
-	key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK);
-	key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
-
-	if (sta_id == priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id)
-		key_flags |= STA_KEY_MULTICAST_MSK;
-
-	keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
-	keyconf->hw_key_idx = keyconf->keyidx;
-	key_flags &= ~STA_KEY_FLG_INVALID;
-
-	spin_lock_irqsave(&priv->sta_lock, flags);
-	priv->stations[sta_id].keyinfo.cipher = keyconf->cipher;
-	priv->stations[sta_id].keyinfo.keylen = keyconf->keylen;
-	memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key,
-	       keyconf->keylen);
-
-	memcpy(priv->stations[sta_id].sta.key.key, keyconf->key,
-	       keyconf->keylen);
-
-	if ((priv->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK)
-			== STA_KEY_FLG_NO_ENC)
-		priv->stations[sta_id].sta.key.key_offset =
-				 iwl_get_free_ucode_key_index(priv);
-	/* else, we are overriding an existing key => no need to allocated room
-	* in uCode. */
-
-	WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
-		"no space for a new key");
-
-	priv->stations[sta_id].sta.key.key_flags = key_flags;
-	priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
-	priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
-
-	IWL_DEBUG_INFO(priv, "hwcrypto: modify ucode station key info\n");
-
-	ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
-
-	spin_unlock_irqrestore(&priv->sta_lock, flags);
-
-	return ret;
-}
-
-static int iwl3945_set_tkip_dynamic_key_info(struct iwl_priv *priv,
-				  struct ieee80211_key_conf *keyconf,
-				  u8 sta_id)
-{
-	return -EOPNOTSUPP;
-}
-
-static int iwl3945_set_wep_dynamic_key_info(struct iwl_priv *priv,
-				  struct ieee80211_key_conf *keyconf,
-				  u8 sta_id)
-{
-	return -EOPNOTSUPP;
-}
-
-static int iwl3945_clear_sta_key_info(struct iwl_priv *priv, u8 sta_id)
-{
-	unsigned long flags;
-	struct iwl_addsta_cmd sta_cmd;
-
-	spin_lock_irqsave(&priv->sta_lock, flags);
-	memset(&priv->stations[sta_id].keyinfo, 0, sizeof(struct iwl_hw_key));
-	memset(&priv->stations[sta_id].sta.key, 0,
-		sizeof(struct iwl4965_keyinfo));
-	priv->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC;
-	priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
-	priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
-	memcpy(&sta_cmd, &priv->stations[sta_id].sta, sizeof(struct iwl_addsta_cmd));
-	spin_unlock_irqrestore(&priv->sta_lock, flags);
-
-	IWL_DEBUG_INFO(priv, "hwcrypto: clear ucode station key info\n");
-	return iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC);
-}
-
-static int iwl3945_set_dynamic_key(struct iwl_priv *priv,
-			struct ieee80211_key_conf *keyconf, u8 sta_id)
-{
-	int ret = 0;
-
-	keyconf->hw_key_idx = HW_KEY_DYNAMIC;
-
-	switch (keyconf->cipher) {
-	case WLAN_CIPHER_SUITE_CCMP:
-		ret = iwl3945_set_ccmp_dynamic_key_info(priv, keyconf, sta_id);
-		break;
-	case WLAN_CIPHER_SUITE_TKIP:
-		ret = iwl3945_set_tkip_dynamic_key_info(priv, keyconf, sta_id);
-		break;
-	case WLAN_CIPHER_SUITE_WEP40:
-	case WLAN_CIPHER_SUITE_WEP104:
-		ret = iwl3945_set_wep_dynamic_key_info(priv, keyconf, sta_id);
-		break;
-	default:
-		IWL_ERR(priv, "Unknown alg: %s alg=%x\n", __func__,
-			keyconf->cipher);
-		ret = -EINVAL;
-	}
-
-	IWL_DEBUG_WEP(priv, "Set dynamic key: alg=%x len=%d idx=%d sta=%d ret=%d\n",
-		      keyconf->cipher, keyconf->keylen, keyconf->keyidx,
-		      sta_id, ret);
-
-	return ret;
-}
-
-static int iwl3945_remove_static_key(struct iwl_priv *priv)
-{
-	int ret = -EOPNOTSUPP;
-
-	return ret;
-}
-
-static int iwl3945_set_static_key(struct iwl_priv *priv,
-				struct ieee80211_key_conf *key)
-{
-	if (key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
-	    key->cipher == WLAN_CIPHER_SUITE_WEP104)
-		return -EOPNOTSUPP;
-
-	IWL_ERR(priv, "Static key invalid: cipher %x\n", key->cipher);
-	return -EINVAL;
-}
-
-static void iwl3945_clear_free_frames(struct iwl_priv *priv)
-{
-	struct list_head *element;
-
-	IWL_DEBUG_INFO(priv, "%d frames on pre-allocated heap on clear.\n",
-		       priv->frames_count);
-
-	while (!list_empty(&priv->free_frames)) {
-		element = priv->free_frames.next;
-		list_del(element);
-		kfree(list_entry(element, struct iwl3945_frame, list));
-		priv->frames_count--;
-	}
-
-	if (priv->frames_count) {
-		IWL_WARN(priv, "%d frames still in use.  Did we lose one?\n",
-			    priv->frames_count);
-		priv->frames_count = 0;
-	}
-}
-
-static struct iwl3945_frame *iwl3945_get_free_frame(struct iwl_priv *priv)
-{
-	struct iwl3945_frame *frame;
-	struct list_head *element;
-	if (list_empty(&priv->free_frames)) {
-		frame = kzalloc(sizeof(*frame), GFP_KERNEL);
-		if (!frame) {
-			IWL_ERR(priv, "Could not allocate frame!\n");
-			return NULL;
-		}
-
-		priv->frames_count++;
-		return frame;
-	}
-
-	element = priv->free_frames.next;
-	list_del(element);
-	return list_entry(element, struct iwl3945_frame, list);
-}
-
-static void iwl3945_free_frame(struct iwl_priv *priv, struct iwl3945_frame *frame)
-{
-	memset(frame, 0, sizeof(*frame));
-	list_add(&frame->list, &priv->free_frames);
-}
-
-unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv,
-				struct ieee80211_hdr *hdr,
-				int left)
-{
-
-	if (!iwl_is_associated(priv, IWL_RXON_CTX_BSS) || !priv->beacon_skb)
-		return 0;
-
-	if (priv->beacon_skb->len > left)
-		return 0;
-
-	memcpy(hdr, priv->beacon_skb->data, priv->beacon_skb->len);
-
-	return priv->beacon_skb->len;
-}
-
-static int iwl3945_send_beacon_cmd(struct iwl_priv *priv)
-{
-	struct iwl3945_frame *frame;
-	unsigned int frame_size;
-	int rc;
-	u8 rate;
-
-	frame = iwl3945_get_free_frame(priv);
-
-	if (!frame) {
-		IWL_ERR(priv, "Could not obtain free frame buffer for beacon "
-			  "command.\n");
-		return -ENOMEM;
-	}
-
-	rate = iwl_rate_get_lowest_plcp(priv,
-				&priv->contexts[IWL_RXON_CTX_BSS]);
-
-	frame_size = iwl3945_hw_get_beacon_cmd(priv, frame, rate);
-
-	rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size,
-			      &frame->u.cmd[0]);
-
-	iwl3945_free_frame(priv, frame);
-
-	return rc;
-}
-
-static void iwl3945_unset_hw_params(struct iwl_priv *priv)
-{
-	if (priv->_3945.shared_virt)
-		dma_free_coherent(&priv->pci_dev->dev,
-				  sizeof(struct iwl3945_shared),
-				  priv->_3945.shared_virt,
-				  priv->_3945.shared_phys);
-}
-
-static void iwl3945_build_tx_cmd_hwcrypto(struct iwl_priv *priv,
-				      struct ieee80211_tx_info *info,
-				      struct iwl_device_cmd *cmd,
-				      struct sk_buff *skb_frag,
-				      int sta_id)
-{
-	struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
-	struct iwl_hw_key *keyinfo = &priv->stations[sta_id].keyinfo;
-
-	tx_cmd->sec_ctl = 0;
-
-	switch (keyinfo->cipher) {
-	case WLAN_CIPHER_SUITE_CCMP:
-		tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
-		memcpy(tx_cmd->key, keyinfo->key, keyinfo->keylen);
-		IWL_DEBUG_TX(priv, "tx_cmd with AES hwcrypto\n");
-		break;
-
-	case WLAN_CIPHER_SUITE_TKIP:
-		break;
-
-	case WLAN_CIPHER_SUITE_WEP104:
-		tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
-		/* fall through */
-	case WLAN_CIPHER_SUITE_WEP40:
-		tx_cmd->sec_ctl |= TX_CMD_SEC_WEP |
-		    (info->control.hw_key->hw_key_idx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT;
-
-		memcpy(&tx_cmd->key[3], keyinfo->key, keyinfo->keylen);
-
-		IWL_DEBUG_TX(priv, "Configuring packet for WEP encryption "
-			     "with key %d\n", info->control.hw_key->hw_key_idx);
-		break;
-
-	default:
-		IWL_ERR(priv, "Unknown encode cipher %x\n", keyinfo->cipher);
-		break;
-	}
-}
-
-/*
- * handle build REPLY_TX command notification.
- */
-static void iwl3945_build_tx_cmd_basic(struct iwl_priv *priv,
-				  struct iwl_device_cmd *cmd,
-				  struct ieee80211_tx_info *info,
-				  struct ieee80211_hdr *hdr, u8 std_id)
-{
-	struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
-	__le32 tx_flags = tx_cmd->tx_flags;
-	__le16 fc = hdr->frame_control;
-
-	tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
-	if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
-		tx_flags |= TX_CMD_FLG_ACK_MSK;
-		if (ieee80211_is_mgmt(fc))
-			tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
-		if (ieee80211_is_probe_resp(fc) &&
-		    !(le16_to_cpu(hdr->seq_ctrl) & 0xf))
-			tx_flags |= TX_CMD_FLG_TSF_MSK;
-	} else {
-		tx_flags &= (~TX_CMD_FLG_ACK_MSK);
-		tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
-	}
-
-	tx_cmd->sta_id = std_id;
-	if (ieee80211_has_morefrags(fc))
-		tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
-
-	if (ieee80211_is_data_qos(fc)) {
-		u8 *qc = ieee80211_get_qos_ctl(hdr);
-		tx_cmd->tid_tspec = qc[0] & 0xf;
-		tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
-	} else {
-		tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
-	}
-
-	priv->cfg->ops->utils->tx_cmd_protection(priv, info, fc, &tx_flags);
-
-	tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
-	if (ieee80211_is_mgmt(fc)) {
-		if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
-			tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3);
-		else
-			tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2);
-	} else {
-		tx_cmd->timeout.pm_frame_timeout = 0;
-	}
-
-	tx_cmd->driver_txop = 0;
-	tx_cmd->tx_flags = tx_flags;
-	tx_cmd->next_frame_len = 0;
-}
-
-/*
- * start REPLY_TX command process
- */
-static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
-{
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-	struct iwl3945_tx_cmd *tx_cmd;
-	struct iwl_tx_queue *txq = NULL;
-	struct iwl_queue *q = NULL;
-	struct iwl_device_cmd *out_cmd;
-	struct iwl_cmd_meta *out_meta;
-	dma_addr_t phys_addr;
-	dma_addr_t txcmd_phys;
-	int txq_id = skb_get_queue_mapping(skb);
-	u16 len, idx, hdr_len;
-	u8 id;
-	u8 unicast;
-	u8 sta_id;
-	u8 tid = 0;
-	__le16 fc;
-	u8 wait_write_ptr = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	if (iwl_is_rfkill(priv)) {
-		IWL_DEBUG_DROP(priv, "Dropping - RF KILL\n");
-		goto drop_unlock;
-	}
-
-	if ((ieee80211_get_tx_rate(priv->hw, info)->hw_value & 0xFF) == IWL_INVALID_RATE) {
-		IWL_ERR(priv, "ERROR: No TX rate available.\n");
-		goto drop_unlock;
-	}
-
-	unicast = !is_multicast_ether_addr(hdr->addr1);
-	id = 0;
-
-	fc = hdr->frame_control;
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (ieee80211_is_auth(fc))
-		IWL_DEBUG_TX(priv, "Sending AUTH frame\n");
-	else if (ieee80211_is_assoc_req(fc))
-		IWL_DEBUG_TX(priv, "Sending ASSOC frame\n");
-	else if (ieee80211_is_reassoc_req(fc))
-		IWL_DEBUG_TX(priv, "Sending REASSOC frame\n");
-#endif
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	hdr_len = ieee80211_hdrlen(fc);
-
-	/* Find index into station table for destination station */
-	sta_id = iwl_sta_id_or_broadcast(
-			priv, &priv->contexts[IWL_RXON_CTX_BSS],
-			info->control.sta);
-	if (sta_id == IWL_INVALID_STATION) {
-		IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
-			       hdr->addr1);
-		goto drop;
-	}
-
-	IWL_DEBUG_RATE(priv, "station Id %d\n", sta_id);
-
-	if (ieee80211_is_data_qos(fc)) {
-		u8 *qc = ieee80211_get_qos_ctl(hdr);
-		tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
-		if (unlikely(tid >= MAX_TID_COUNT))
-			goto drop;
-	}
-
-	/* Descriptor for chosen Tx queue */
-	txq = &priv->txq[txq_id];
-	q = &txq->q;
-
-	if ((iwl_queue_space(q) < q->high_mark))
-		goto drop;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	idx = get_cmd_index(q, q->write_ptr, 0);
-
-	/* Set up driver data for this TFD */
-	memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl_tx_info));
-	txq->txb[q->write_ptr].skb = skb;
-	txq->txb[q->write_ptr].ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
-	/* Init first empty entry in queue's array of Tx/cmd buffers */
-	out_cmd = txq->cmd[idx];
-	out_meta = &txq->meta[idx];
-	tx_cmd = (struct iwl3945_tx_cmd *)out_cmd->cmd.payload;
-	memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
-	memset(tx_cmd, 0, sizeof(*tx_cmd));
-
-	/*
-	 * Set up the Tx-command (not MAC!) header.
-	 * Store the chosen Tx queue and TFD index within the sequence field;
-	 * after Tx, uCode's Tx response will return this value so driver can
-	 * locate the frame within the tx queue and do post-tx processing.
-	 */
-	out_cmd->hdr.cmd = REPLY_TX;
-	out_cmd->hdr.sequence = cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) |
-				INDEX_TO_SEQ(q->write_ptr)));
-
-	/* Copy MAC header from skb into command buffer */
-	memcpy(tx_cmd->hdr, hdr, hdr_len);
-
-
-	if (info->control.hw_key)
-		iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, sta_id);
-
-	/* TODO need this for burst mode later on */
-	iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, sta_id);
-
-	/* set is_hcca to 0; it probably will never be implemented */
-	iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0);
-
-	/* Total # bytes to be transmitted */
-	len = (u16)skb->len;
-	tx_cmd->len = cpu_to_le16(len);
-
-	iwl_dbg_log_tx_data_frame(priv, len, hdr);
-	iwl_update_stats(priv, true, fc, len);
-	tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
-	tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
-
-	if (!ieee80211_has_morefrags(hdr->frame_control)) {
-		txq->need_update = 1;
-	} else {
-		wait_write_ptr = 1;
-		txq->need_update = 0;
-	}
-
-	IWL_DEBUG_TX(priv, "sequence nr = 0X%x\n",
-		     le16_to_cpu(out_cmd->hdr.sequence));
-	IWL_DEBUG_TX(priv, "tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
-	iwl_print_hex_dump(priv, IWL_DL_TX, tx_cmd, sizeof(*tx_cmd));
-	iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr,
-			   ieee80211_hdrlen(fc));
-
-	/*
-	 * Use the first empty entry in this queue's command buffer array
-	 * to contain the Tx command and MAC header concatenated together
-	 * (payload data will be in another buffer).
-	 * Size of this varies, due to varying MAC header length.
-	 * If end is not dword aligned, we'll have 2 extra bytes at the end
-	 * of the MAC header (device reads on dword boundaries).
-	 * We'll tell device about this padding later.
-	 */
-	len = sizeof(struct iwl3945_tx_cmd) +
-			sizeof(struct iwl_cmd_header) + hdr_len;
-	len = (len + 3) & ~3;
-
-	/* Physical address of this Tx command's header (not MAC header!),
-	 * within command buffer array. */
-	txcmd_phys = pci_map_single(priv->pci_dev, &out_cmd->hdr,
-				    len, PCI_DMA_TODEVICE);
-	/* we do not map meta data ... so we can safely access address to
-	 * provide to unmap command*/
-	dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
-	dma_unmap_len_set(out_meta, len, len);
-
-	/* Add buffer containing Tx command and MAC(!) header to TFD's
-	 * first entry */
-	priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
-						   txcmd_phys, len, 1, 0);
-
-
-	/* Set up TFD's 2nd entry to point directly to remainder of skb,
-	 * if any (802.11 null frames have no payload). */
-	len = skb->len - hdr_len;
-	if (len) {
-		phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len,
-					   len, PCI_DMA_TODEVICE);
-		priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
-							   phys_addr, len,
-							   0, U32_PAD(len));
-	}
-
-
-	/* Tell device the write index *just past* this latest filled TFD */
-	q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
-	iwl_txq_update_write_ptr(priv, txq);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	if ((iwl_queue_space(q) < q->high_mark)
-	    && priv->mac80211_registered) {
-		if (wait_write_ptr) {
-			spin_lock_irqsave(&priv->lock, flags);
-			txq->need_update = 1;
-			iwl_txq_update_write_ptr(priv, txq);
-			spin_unlock_irqrestore(&priv->lock, flags);
-		}
-
-		iwl_stop_queue(priv, txq);
-	}
-
-	return 0;
-
-drop_unlock:
-	spin_unlock_irqrestore(&priv->lock, flags);
-drop:
-	return -1;
-}
-
-static int iwl3945_get_measurement(struct iwl_priv *priv,
-			       struct ieee80211_measurement_params *params,
-			       u8 type)
-{
-	struct iwl_spectrum_cmd spectrum;
-	struct iwl_rx_packet *pkt;
-	struct iwl_host_cmd cmd = {
-		.id = REPLY_SPECTRUM_MEASUREMENT_CMD,
-		.data = (void *)&spectrum,
-		.flags = CMD_WANT_SKB,
-	};
-	u32 add_time = le64_to_cpu(params->start_time);
-	int rc;
-	int spectrum_resp_status;
-	int duration = le16_to_cpu(params->duration);
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
-	if (iwl_is_associated(priv, IWL_RXON_CTX_BSS))
-		add_time = iwl_usecs_to_beacons(priv,
-			le64_to_cpu(params->start_time) - priv->_3945.last_tsf,
-			le16_to_cpu(ctx->timing.beacon_interval));
-
-	memset(&spectrum, 0, sizeof(spectrum));
-
-	spectrum.channel_count = cpu_to_le16(1);
-	spectrum.flags =
-	    RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK;
-	spectrum.filter_flags = MEASUREMENT_FILTER_FLAG;
-	cmd.len = sizeof(spectrum);
-	spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len));
-
-	if (iwl_is_associated(priv, IWL_RXON_CTX_BSS))
-		spectrum.start_time =
-			iwl_add_beacon_time(priv,
-				priv->_3945.last_beacon_time, add_time,
-				le16_to_cpu(ctx->timing.beacon_interval));
-	else
-		spectrum.start_time = 0;
-
-	spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT);
-	spectrum.channels[0].channel = params->channel;
-	spectrum.channels[0].type = type;
-	if (ctx->active.flags & RXON_FLG_BAND_24G_MSK)
-		spectrum.flags |= RXON_FLG_BAND_24G_MSK |
-		    RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK;
-
-	rc = iwl_send_cmd_sync(priv, &cmd);
-	if (rc)
-		return rc;
-
-	pkt = (struct iwl_rx_packet *)cmd.reply_page;
-	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
-		IWL_ERR(priv, "Bad return from REPLY_RX_ON_ASSOC command\n");
-		rc = -EIO;
-	}
-
-	spectrum_resp_status = le16_to_cpu(pkt->u.spectrum.status);
-	switch (spectrum_resp_status) {
-	case 0:		/* Command will be handled */
-		if (pkt->u.spectrum.id != 0xff) {
-			IWL_DEBUG_INFO(priv, "Replaced existing measurement: %d\n",
-						pkt->u.spectrum.id);
-			priv->measurement_status &= ~MEASUREMENT_READY;
-		}
-		priv->measurement_status |= MEASUREMENT_ACTIVE;
-		rc = 0;
-		break;
-
-	case 1:		/* Command will not be handled */
-		rc = -EAGAIN;
-		break;
-	}
-
-	iwl_free_pages(priv, cmd.reply_page);
-
-	return rc;
-}
-
-static void iwl3945_rx_reply_alive(struct iwl_priv *priv,
-			       struct iwl_rx_mem_buffer *rxb)
-{
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-	struct iwl_alive_resp *palive;
-	struct delayed_work *pwork;
-
-	palive = &pkt->u.alive_frame;
-
-	IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision "
-		       "0x%01X 0x%01X\n",
-		       palive->is_valid, palive->ver_type,
-		       palive->ver_subtype);
-
-	if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
-		IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
-		memcpy(&priv->card_alive_init, &pkt->u.alive_frame,
-		       sizeof(struct iwl_alive_resp));
-		pwork = &priv->init_alive_start;
-	} else {
-		IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
-		memcpy(&priv->card_alive, &pkt->u.alive_frame,
-		       sizeof(struct iwl_alive_resp));
-		pwork = &priv->alive_start;
-		iwl3945_disable_events(priv);
-	}
-
-	/* We delay the ALIVE response by 5ms to
-	 * give the HW RF Kill time to activate... */
-	if (palive->is_valid == UCODE_VALID_OK)
-		queue_delayed_work(priv->workqueue, pwork,
-				   msecs_to_jiffies(5));
-	else
-		IWL_WARN(priv, "uCode did not respond OK.\n");
-}
-
-static void iwl3945_rx_reply_add_sta(struct iwl_priv *priv,
-				 struct iwl_rx_mem_buffer *rxb)
-{
-#ifdef CONFIG_IWLWIFI_DEBUG
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-#endif
-
-	IWL_DEBUG_RX(priv, "Received REPLY_ADD_STA: 0x%02X\n", pkt->u.status);
-}
-
-static void iwl3945_bg_beacon_update(struct work_struct *work)
-{
-	struct iwl_priv *priv =
-		container_of(work, struct iwl_priv, beacon_update);
-	struct sk_buff *beacon;
-
-	/* Pull updated AP beacon from mac80211. will fail if not in AP mode */
-	beacon = ieee80211_beacon_get(priv->hw,
-			priv->contexts[IWL_RXON_CTX_BSS].vif);
-
-	if (!beacon) {
-		IWL_ERR(priv, "update beacon failed\n");
-		return;
-	}
-
-	mutex_lock(&priv->mutex);
-	/* new beacon skb is allocated every time; dispose previous.*/
-	if (priv->beacon_skb)
-		dev_kfree_skb(priv->beacon_skb);
-
-	priv->beacon_skb = beacon;
-	mutex_unlock(&priv->mutex);
-
-	iwl3945_send_beacon_cmd(priv);
-}
-
-static void iwl3945_rx_beacon_notif(struct iwl_priv *priv,
-				struct iwl_rx_mem_buffer *rxb)
-{
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-	struct iwl3945_beacon_notif *beacon = &(pkt->u.beacon_status);
-#ifdef CONFIG_IWLWIFI_DEBUG
-	u8 rate = beacon->beacon_notify_hdr.rate;
-
-	IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d "
-		"tsf %d %d rate %d\n",
-		le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK,
-		beacon->beacon_notify_hdr.failure_frame,
-		le32_to_cpu(beacon->ibss_mgr_status),
-		le32_to_cpu(beacon->high_tsf),
-		le32_to_cpu(beacon->low_tsf), rate);
-#endif
-
-	priv->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
-
-	if ((priv->iw_mode == NL80211_IFTYPE_AP) &&
-	    (!test_bit(STATUS_EXIT_PENDING, &priv->status)))
-		queue_work(priv->workqueue, &priv->beacon_update);
-}
-
-/* Handle notification from uCode that card's power state is changing
- * due to software, hardware, or critical temperature RFKILL */
-static void iwl3945_rx_card_state_notif(struct iwl_priv *priv,
-				    struct iwl_rx_mem_buffer *rxb)
-{
-	struct iwl_rx_packet *pkt = rxb_addr(rxb);
-	u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
-	unsigned long status = priv->status;
-
-	IWL_WARN(priv, "Card state received: HW:%s SW:%s\n",
-			  (flags & HW_CARD_DISABLED) ? "Kill" : "On",
-			  (flags & SW_CARD_DISABLED) ? "Kill" : "On");
-
-	iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
-		    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-
-	if (flags & HW_CARD_DISABLED)
-		set_bit(STATUS_RF_KILL_HW, &priv->status);
-	else
-		clear_bit(STATUS_RF_KILL_HW, &priv->status);
-
-
-	iwl_scan_cancel(priv);
-
-	if ((test_bit(STATUS_RF_KILL_HW, &status) !=
-	     test_bit(STATUS_RF_KILL_HW, &priv->status)))
-		wiphy_rfkill_set_hw_state(priv->hw->wiphy,
-				test_bit(STATUS_RF_KILL_HW, &priv->status));
-	else
-		wake_up_interruptible(&priv->wait_command_queue);
-}
-
-/**
- * iwl3945_setup_rx_handlers - Initialize Rx handler callbacks
- *
- * Setup the RX handlers for each of the reply types sent from the uCode
- * to the host.
- *
- * This function chains into the hardware specific files for them to setup
- * any hardware specific handlers as well.
- */
-static void iwl3945_setup_rx_handlers(struct iwl_priv *priv)
-{
-	priv->rx_handlers[REPLY_ALIVE] = iwl3945_rx_reply_alive;
-	priv->rx_handlers[REPLY_ADD_STA] = iwl3945_rx_reply_add_sta;
-	priv->rx_handlers[REPLY_ERROR] = iwl_rx_reply_error;
-	priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_rx_csa;
-	priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
-			iwl_rx_spectrum_measure_notif;
-	priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl_rx_pm_sleep_notif;
-	priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
-	    iwl_rx_pm_debug_statistics_notif;
-	priv->rx_handlers[BEACON_NOTIFICATION] = iwl3945_rx_beacon_notif;
-
-	/*
-	 * The same handler is used for both the REPLY to a discrete
-	 * statistics request from the host as well as for the periodic
-	 * statistics notifications (after received beacons) from the uCode.
-	 */
-	priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl3945_reply_statistics;
-	priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl3945_hw_rx_statistics;
-
-	iwl_setup_rx_scan_handlers(priv);
-	priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl3945_rx_card_state_notif;
-
-	/* Set up hardware specific Rx handlers */
-	iwl3945_hw_rx_handler_setup(priv);
-}
-
-/************************** RX-FUNCTIONS ****************************/
-/*
- * Rx theory of operation
- *
- * The host allocates 32 DMA target addresses and passes the host address
- * to the firmware at register IWL_RFDS_TABLE_LOWER + N * RFD_SIZE where N is
- * 0 to 31
- *
- * Rx Queue Indexes
- * The host/firmware share two index registers for managing the Rx buffers.
- *
- * The READ index maps to the first position that the firmware may be writing
- * to -- the driver can read up to (but not including) this position and get
- * good data.
- * The READ index is managed by the firmware once the card is enabled.
- *
- * The WRITE index maps to the last position the driver has read from -- the
- * position preceding WRITE is the last slot the firmware can place a packet.
- *
- * The queue is empty (no good data) if WRITE = READ - 1, and is full if
- * WRITE = READ.
- *
- * During initialization, the host sets up the READ queue position to the first
- * INDEX position, and WRITE to the last (READ - 1 wrapped)
- *
- * When the firmware places a packet in a buffer, it will advance the READ index
- * and fire the RX interrupt.  The driver can then query the READ index and
- * process as many packets as possible, moving the WRITE index forward as it
- * resets the Rx queue buffers with new memory.
- *
- * The management in the driver is as follows:
- * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free.  When
- *   iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
- *   to replenish the iwl->rxq->rx_free.
- * + In iwl3945_rx_replenish (scheduled) if 'processed' != 'read' then the
- *   iwl->rxq is replenished and the READ INDEX is updated (updating the
- *   'processed' and 'read' driver indexes as well)
- * + A received packet is processed and handed to the kernel network stack,
- *   detached from the iwl->rxq.  The driver 'processed' index is updated.
- * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
- *   list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
- *   INDEX is not incremented and iwl->status(RX_STALLED) is set.  If there
- *   were enough free buffers and RX_STALLED is set it is cleared.
- *
- *
- * Driver sequence:
- *
- * iwl3945_rx_replenish()     Replenishes rx_free list from rx_used, and calls
- *                            iwl3945_rx_queue_restock
- * iwl3945_rx_queue_restock() Moves available buffers from rx_free into Rx
- *                            queue, updates firmware pointers, and updates
- *                            the WRITE index.  If insufficient rx_free buffers
- *                            are available, schedules iwl3945_rx_replenish
- *
- * -- enable interrupts --
- * ISR - iwl3945_rx()         Detach iwl_rx_mem_buffers from pool up to the
- *                            READ INDEX, detaching the SKB from the pool.
- *                            Moves the packet buffer from queue to rx_used.
- *                            Calls iwl3945_rx_queue_restock to refill any empty
- *                            slots.
- * ...
- *
- */
-
-/**
- * iwl3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
- */
-static inline __le32 iwl3945_dma_addr2rbd_ptr(struct iwl_priv *priv,
-					  dma_addr_t dma_addr)
-{
-	return cpu_to_le32((u32)dma_addr);
-}
-
-/**
- * iwl3945_rx_queue_restock - refill RX queue from pre-allocated pool
- *
- * If there are slots in the RX queue that need to be restocked,
- * and we have free pre-allocated buffers, fill the ranks as much
- * as we can, pulling from rx_free.
- *
- * This moves the 'write' index forward to catch up with 'processed', and
- * also updates the memory address in the firmware to reference the new
- * target buffer.
- */
-static void iwl3945_rx_queue_restock(struct iwl_priv *priv)
-{
-	struct iwl_rx_queue *rxq = &priv->rxq;
-	struct list_head *element;
-	struct iwl_rx_mem_buffer *rxb;
-	unsigned long flags;
-	int write;
-
-	spin_lock_irqsave(&rxq->lock, flags);
-	write = rxq->write & ~0x7;
-	while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
-		/* Get next free Rx buffer, remove from free list */
-		element = rxq->rx_free.next;
-		rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
-		list_del(element);
-
-		/* Point to Rx buffer via next RBD in circular buffer */
-		rxq->bd[rxq->write] = iwl3945_dma_addr2rbd_ptr(priv, rxb->page_dma);
-		rxq->queue[rxq->write] = rxb;
-		rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
-		rxq->free_count--;
-	}
-	spin_unlock_irqrestore(&rxq->lock, flags);
-	/* If the pre-allocated buffer pool is dropping low, schedule to
-	 * refill it */
-	if (rxq->free_count <= RX_LOW_WATERMARK)
-		queue_work(priv->workqueue, &priv->rx_replenish);
-
-
-	/* If we've added more space for the firmware to place data, tell it.
-	 * Increment device's write pointer in multiples of 8. */
-	if ((rxq->write_actual != (rxq->write & ~0x7))
-	    || (abs(rxq->write - rxq->read) > 7)) {
-		spin_lock_irqsave(&rxq->lock, flags);
-		rxq->need_update = 1;
-		spin_unlock_irqrestore(&rxq->lock, flags);
-		iwl_rx_queue_update_write_ptr(priv, rxq);
-	}
-}
-
-/**
- * iwl3945_rx_replenish - Move all used packet from rx_used to rx_free
- *
- * When moving to rx_free an SKB is allocated for the slot.
- *
- * Also restock the Rx queue via iwl3945_rx_queue_restock.
- * This is called as a scheduled work item (except for during initialization)
- */
-static void iwl3945_rx_allocate(struct iwl_priv *priv, gfp_t priority)
-{
-	struct iwl_rx_queue *rxq = &priv->rxq;
-	struct list_head *element;
-	struct iwl_rx_mem_buffer *rxb;
-	struct page *page;
-	unsigned long flags;
-	gfp_t gfp_mask = priority;
-
-	while (1) {
-		spin_lock_irqsave(&rxq->lock, flags);
-
-		if (list_empty(&rxq->rx_used)) {
-			spin_unlock_irqrestore(&rxq->lock, flags);
-			return;
-		}
-		spin_unlock_irqrestore(&rxq->lock, flags);
-
-		if (rxq->free_count > RX_LOW_WATERMARK)
-			gfp_mask |= __GFP_NOWARN;
-
-		if (priv->hw_params.rx_page_order > 0)
-			gfp_mask |= __GFP_COMP;
-
-		/* Alloc a new receive buffer */
-		page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order);
-		if (!page) {
-			if (net_ratelimit())
-				IWL_DEBUG_INFO(priv, "Failed to allocate SKB buffer.\n");
-			if ((rxq->free_count <= RX_LOW_WATERMARK) &&
-			    net_ratelimit())
-				IWL_CRIT(priv, "Failed to allocate SKB buffer with %s. Only %u free buffers remaining.\n",
-					 priority == GFP_ATOMIC ?  "GFP_ATOMIC" : "GFP_KERNEL",
-					 rxq->free_count);
-			/* We don't reschedule replenish work here -- we will
-			 * call the restock method and if it still needs
-			 * more buffers it will schedule replenish */
-			break;
-		}
-
-		spin_lock_irqsave(&rxq->lock, flags);
-		if (list_empty(&rxq->rx_used)) {
-			spin_unlock_irqrestore(&rxq->lock, flags);
-			__free_pages(page, priv->hw_params.rx_page_order);
-			return;
-		}
-		element = rxq->rx_used.next;
-		rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
-		list_del(element);
-		spin_unlock_irqrestore(&rxq->lock, flags);
-
-		rxb->page = page;
-		/* Get physical address of RB/SKB */
-		rxb->page_dma = pci_map_page(priv->pci_dev, page, 0,
-				PAGE_SIZE << priv->hw_params.rx_page_order,
-				PCI_DMA_FROMDEVICE);
-
-		spin_lock_irqsave(&rxq->lock, flags);
-
-		list_add_tail(&rxb->list, &rxq->rx_free);
-		rxq->free_count++;
-		priv->alloc_rxb_page++;
-
-		spin_unlock_irqrestore(&rxq->lock, flags);
-	}
-}
-
-void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
-{
-	unsigned long flags;
-	int i;
-	spin_lock_irqsave(&rxq->lock, flags);
-	INIT_LIST_HEAD(&rxq->rx_free);
-	INIT_LIST_HEAD(&rxq->rx_used);
-	/* Fill the rx_used queue with _all_ of the Rx buffers */
-	for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
-		/* In the reset function, these buffers may have been allocated
-		 * to an SKB, so we need to unmap and free potential storage */
-		if (rxq->pool[i].page != NULL) {
-			pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
-				PAGE_SIZE << priv->hw_params.rx_page_order,
-				PCI_DMA_FROMDEVICE);
-			__iwl_free_pages(priv, rxq->pool[i].page);
-			rxq->pool[i].page = NULL;
-		}
-		list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
-	}
-
-	/* Set us so that we have processed and used all buffers, but have
-	 * not restocked the Rx queue with fresh buffers */
-	rxq->read = rxq->write = 0;
-	rxq->write_actual = 0;
-	rxq->free_count = 0;
-	spin_unlock_irqrestore(&rxq->lock, flags);
-}
-
-void iwl3945_rx_replenish(void *data)
-{
-	struct iwl_priv *priv = data;
-	unsigned long flags;
-
-	iwl3945_rx_allocate(priv, GFP_KERNEL);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	iwl3945_rx_queue_restock(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-static void iwl3945_rx_replenish_now(struct iwl_priv *priv)
-{
-	iwl3945_rx_allocate(priv, GFP_ATOMIC);
-
-	iwl3945_rx_queue_restock(priv);
-}
-
-
-/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
- * If an SKB has been detached, the POOL needs to have its SKB set to NULL
- * This free routine walks the list of POOL entries and if SKB is set to
- * non NULL it is unmapped and freed
- */
-static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
-{
-	int i;
-	for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
-		if (rxq->pool[i].page != NULL) {
-			pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
-				PAGE_SIZE << priv->hw_params.rx_page_order,
-				PCI_DMA_FROMDEVICE);
-			__iwl_free_pages(priv, rxq->pool[i].page);
-			rxq->pool[i].page = NULL;
-		}
-	}
-
-	dma_free_coherent(&priv->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
-			  rxq->bd_dma);
-	dma_free_coherent(&priv->pci_dev->dev, sizeof(struct iwl_rb_status),
-			  rxq->rb_stts, rxq->rb_stts_dma);
-	rxq->bd = NULL;
-	rxq->rb_stts  = NULL;
-}
-
-
-/* Convert linear signal-to-noise ratio into dB */
-static u8 ratio2dB[100] = {
-/*	 0   1   2   3   4   5   6   7   8   9 */
-	 0,  0,  6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */
-	20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */
-	26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */
-	29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */
-	32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */
-	34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */
-	36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */
-	37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */
-	38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */
-	39, 39, 39, 39, 39, 40, 40, 40, 40, 40  /* 90 - 99 */
-};
-
-/* Calculates a relative dB value from a ratio of linear
- *   (i.e. not dB) signal levels.
- * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
-int iwl3945_calc_db_from_ratio(int sig_ratio)
-{
-	/* 1000:1 or higher just report as 60 dB */
-	if (sig_ratio >= 1000)
-		return 60;
-
-	/* 100:1 or higher, divide by 10 and use table,
-	 *   add 20 dB to make up for divide by 10 */
-	if (sig_ratio >= 100)
-		return 20 + (int)ratio2dB[sig_ratio/10];
-
-	/* We shouldn't see this */
-	if (sig_ratio < 1)
-		return 0;
-
-	/* Use table for ratios 1:1 - 99:1 */
-	return (int)ratio2dB[sig_ratio];
-}
-
-/**
- * iwl3945_rx_handle - Main entry function for receiving responses from uCode
- *
- * Uses the priv->rx_handlers callback function array to invoke
- * the appropriate handlers, including command responses,
- * frame-received notifications, and other notifications.
- */
-static void iwl3945_rx_handle(struct iwl_priv *priv)
-{
-	struct iwl_rx_mem_buffer *rxb;
-	struct iwl_rx_packet *pkt;
-	struct iwl_rx_queue *rxq = &priv->rxq;
-	u32 r, i;
-	int reclaim;
-	unsigned long flags;
-	u8 fill_rx = 0;
-	u32 count = 8;
-	int total_empty = 0;
-
-	/* uCode's read index (stored in shared DRAM) indicates the last Rx
-	 * buffer that the driver may process (last buffer filled by ucode). */
-	r = le16_to_cpu(rxq->rb_stts->closed_rb_num) &  0x0FFF;
-	i = rxq->read;
-
-	/* calculate total frames need to be restock after handling RX */
-	total_empty = r - rxq->write_actual;
-	if (total_empty < 0)
-		total_empty += RX_QUEUE_SIZE;
-
-	if (total_empty > (RX_QUEUE_SIZE / 2))
-		fill_rx = 1;
-	/* Rx interrupt, but nothing sent from uCode */
-	if (i == r)
-		IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i);
-
-	while (i != r) {
-		int len;
-
-		rxb = rxq->queue[i];
-
-		/* If an RXB doesn't have a Rx queue slot associated with it,
-		 * then a bug has been introduced in the queue refilling
-		 * routines -- catch it here */
-		BUG_ON(rxb == NULL);
-
-		rxq->queue[i] = NULL;
-
-		pci_unmap_page(priv->pci_dev, rxb->page_dma,
-			       PAGE_SIZE << priv->hw_params.rx_page_order,
-			       PCI_DMA_FROMDEVICE);
-		pkt = rxb_addr(rxb);
-
-		len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
-		len += sizeof(u32); /* account for status word */
-		trace_iwlwifi_dev_rx(priv, pkt, len);
-
-		/* Reclaim a command buffer only if this packet is a response
-		 *   to a (driver-originated) command.
-		 * If the packet (e.g. Rx frame) originated from uCode,
-		 *   there is no command buffer to reclaim.
-		 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
-		 *   but apparently a few don't get set; catch them here. */
-		reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
-			(pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
-			(pkt->hdr.cmd != REPLY_TX);
-
-		/* Based on type of command response or notification,
-		 *   handle those that need handling via function in
-		 *   rx_handlers table.  See iwl3945_setup_rx_handlers() */
-		if (priv->rx_handlers[pkt->hdr.cmd]) {
-			IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r, i,
-				get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
-			priv->isr_stats.rx_handlers[pkt->hdr.cmd]++;
-			priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
-		} else {
-			/* No handling needed */
-			IWL_DEBUG_RX(priv,
-				"r %d i %d No handler needed for %s, 0x%02x\n",
-				r, i, get_cmd_string(pkt->hdr.cmd),
-				pkt->hdr.cmd);
-		}
-
-		/*
-		 * XXX: After here, we should always check rxb->page
-		 * against NULL before touching it or its virtual
-		 * memory (pkt). Because some rx_handler might have
-		 * already taken or freed the pages.
-		 */
-
-		if (reclaim) {
-			/* Invoke any callbacks, transfer the buffer to caller,
-			 * and fire off the (possibly) blocking iwl_send_cmd()
-			 * as we reclaim the driver command queue */
-			if (rxb->page)
-				iwl_tx_cmd_complete(priv, rxb);
-			else
-				IWL_WARN(priv, "Claim null rxb?\n");
-		}
-
-		/* Reuse the page if possible. For notification packets and
-		 * SKBs that fail to Rx correctly, add them back into the
-		 * rx_free list for reuse later. */
-		spin_lock_irqsave(&rxq->lock, flags);
-		if (rxb->page != NULL) {
-			rxb->page_dma = pci_map_page(priv->pci_dev, rxb->page,
-				0, PAGE_SIZE << priv->hw_params.rx_page_order,
-				PCI_DMA_FROMDEVICE);
-			list_add_tail(&rxb->list, &rxq->rx_free);
-			rxq->free_count++;
-		} else
-			list_add_tail(&rxb->list, &rxq->rx_used);
-
-		spin_unlock_irqrestore(&rxq->lock, flags);
-
-		i = (i + 1) & RX_QUEUE_MASK;
-		/* If there are a lot of unused frames,
-		 * restock the Rx queue so ucode won't assert. */
-		if (fill_rx) {
-			count++;
-			if (count >= 8) {
-				rxq->read = i;
-				iwl3945_rx_replenish_now(priv);
-				count = 0;
-			}
-		}
-	}
-
-	/* Backtrack one entry */
-	rxq->read = i;
-	if (fill_rx)
-		iwl3945_rx_replenish_now(priv);
-	else
-		iwl3945_rx_queue_restock(priv);
-}
-
-/* call this function to flush any scheduled tasklet */
-static inline void iwl_synchronize_irq(struct iwl_priv *priv)
-{
-	/* wait to make sure we flush pending tasklet*/
-	synchronize_irq(priv->pci_dev->irq);
-	tasklet_kill(&priv->irq_tasklet);
-}
-
-static const char *desc_lookup(int i)
-{
-	switch (i) {
-	case 1:
-		return "FAIL";
-	case 2:
-		return "BAD_PARAM";
-	case 3:
-		return "BAD_CHECKSUM";
-	case 4:
-		return "NMI_INTERRUPT";
-	case 5:
-		return "SYSASSERT";
-	case 6:
-		return "FATAL_ERROR";
-	}
-
-	return "UNKNOWN";
-}
-
-#define ERROR_START_OFFSET  (1 * sizeof(u32))
-#define ERROR_ELEM_SIZE     (7 * sizeof(u32))
-
-void iwl3945_dump_nic_error_log(struct iwl_priv *priv)
-{
-	u32 i;
-	u32 desc, time, count, base, data1;
-	u32 blink1, blink2, ilink1, ilink2;
-
-	base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
-
-	if (!iwl3945_hw_valid_rtc_data_addr(base)) {
-		IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base);
-		return;
-	}
-
-
-	count = iwl_read_targ_mem(priv, base);
-
-	if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
-		IWL_ERR(priv, "Start IWL Error Log Dump:\n");
-		IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
-			priv->status, count);
-	}
-
-	IWL_ERR(priv, "Desc       Time       asrtPC  blink2 "
-		  "ilink1  nmiPC   Line\n");
-	for (i = ERROR_START_OFFSET;
-	     i < (count * ERROR_ELEM_SIZE) + ERROR_START_OFFSET;
-	     i += ERROR_ELEM_SIZE) {
-		desc = iwl_read_targ_mem(priv, base + i);
-		time =
-		    iwl_read_targ_mem(priv, base + i + 1 * sizeof(u32));
-		blink1 =
-		    iwl_read_targ_mem(priv, base + i + 2 * sizeof(u32));
-		blink2 =
-		    iwl_read_targ_mem(priv, base + i + 3 * sizeof(u32));
-		ilink1 =
-		    iwl_read_targ_mem(priv, base + i + 4 * sizeof(u32));
-		ilink2 =
-		    iwl_read_targ_mem(priv, base + i + 5 * sizeof(u32));
-		data1 =
-		    iwl_read_targ_mem(priv, base + i + 6 * sizeof(u32));
-
-		IWL_ERR(priv,
-			"%-13s (0x%X) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
-			desc_lookup(desc), desc, time, blink1, blink2,
-			ilink1, ilink2, data1);
-		trace_iwlwifi_dev_ucode_error(priv, desc, time, data1, 0,
-					0, blink1, blink2, ilink1, ilink2);
-	}
-}
-
-#define EVENT_START_OFFSET  (6 * sizeof(u32))
-
-/**
- * iwl3945_print_event_log - Dump error event log to syslog
- *
- */
-static int iwl3945_print_event_log(struct iwl_priv *priv, u32 start_idx,
-				  u32 num_events, u32 mode,
-				  int pos, char **buf, size_t bufsz)
-{
-	u32 i;
-	u32 base;       /* SRAM byte address of event log header */
-	u32 event_size;	/* 2 u32s, or 3 u32s if timestamp recorded */
-	u32 ptr;        /* SRAM byte address of log data */
-	u32 ev, time, data; /* event log data */
-	unsigned long reg_flags;
-
-	if (num_events == 0)
-		return pos;
-
-	base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
-
-	if (mode == 0)
-		event_size = 2 * sizeof(u32);
-	else
-		event_size = 3 * sizeof(u32);
-
-	ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
-
-	/* Make sure device is powered up for SRAM reads */
-	spin_lock_irqsave(&priv->reg_lock, reg_flags);
-	iwl_grab_nic_access(priv);
-
-	/* Set starting address; reads will auto-increment */
-	_iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr);
-	rmb();
-
-	/* "time" is actually "data" for mode 0 (no timestamp).
-	 * place event id # at far right for easier visual parsing. */
-	for (i = 0; i < num_events; i++) {
-		ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
-		time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
-		if (mode == 0) {
-			/* data, ev */
-			if (bufsz) {
-				pos += scnprintf(*buf + pos, bufsz - pos,
-						"0x%08x:%04u\n",
-						time, ev);
-			} else {
-				IWL_ERR(priv, "0x%08x\t%04u\n", time, ev);
-				trace_iwlwifi_dev_ucode_event(priv, 0,
-							      time, ev);
-			}
-		} else {
-			data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
-			if (bufsz) {
-				pos += scnprintf(*buf + pos, bufsz - pos,
-						"%010u:0x%08x:%04u\n",
-						 time, data, ev);
-			} else {
-				IWL_ERR(priv, "%010u\t0x%08x\t%04u\n",
-					time, data, ev);
-				trace_iwlwifi_dev_ucode_event(priv, time,
-							      data, ev);
-			}
-		}
-	}
-
-	/* Allow device to power down */
-	iwl_release_nic_access(priv);
-	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
-	return pos;
-}
-
-/**
- * iwl3945_print_last_event_logs - Dump the newest # of event log to syslog
- */
-static int iwl3945_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
-				      u32 num_wraps, u32 next_entry,
-				      u32 size, u32 mode,
-				      int pos, char **buf, size_t bufsz)
-{
-	/*
-	 * display the newest DEFAULT_LOG_ENTRIES entries
-	 * i.e the entries just before the next ont that uCode would fill.
-	 */
-	if (num_wraps) {
-		if (next_entry < size) {
-			pos = iwl3945_print_event_log(priv,
-					     capacity - (size - next_entry),
-					     size - next_entry, mode,
-					     pos, buf, bufsz);
-			pos = iwl3945_print_event_log(priv, 0,
-						      next_entry, mode,
-						      pos, buf, bufsz);
-		} else
-			pos = iwl3945_print_event_log(priv, next_entry - size,
-						      size, mode,
-						      pos, buf, bufsz);
-	} else {
-		if (next_entry < size)
-			pos = iwl3945_print_event_log(priv, 0,
-						      next_entry, mode,
-						      pos, buf, bufsz);
-		else
-			pos = iwl3945_print_event_log(priv, next_entry - size,
-						      size, mode,
-						      pos, buf, bufsz);
-	}
-	return pos;
-}
-
-#define DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES (20)
-
-int iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
-			    char **buf, bool display)
-{
-	u32 base;       /* SRAM byte address of event log header */
-	u32 capacity;   /* event log capacity in # entries */
-	u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
-	u32 num_wraps;  /* # times uCode wrapped to top of log */
-	u32 next_entry; /* index of next entry to be written by uCode */
-	u32 size;       /* # entries that we'll print */
-	int pos = 0;
-	size_t bufsz = 0;
-
-	base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
-	if (!iwl3945_hw_valid_rtc_data_addr(base)) {
-		IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
-		return  -EINVAL;
-	}
-
-	/* event log header */
-	capacity = iwl_read_targ_mem(priv, base);
-	mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
-	num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
-	next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
-
-	if (capacity > priv->cfg->base_params->max_event_log_size) {
-		IWL_ERR(priv, "Log capacity %d is bogus, limit to %d entries\n",
-			capacity, priv->cfg->base_params->max_event_log_size);
-		capacity = priv->cfg->base_params->max_event_log_size;
-	}
-
-	if (next_entry > priv->cfg->base_params->max_event_log_size) {
-		IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n",
-			next_entry, priv->cfg->base_params->max_event_log_size);
-		next_entry = priv->cfg->base_params->max_event_log_size;
-	}
-
-	size = num_wraps ? capacity : next_entry;
-
-	/* bail out if nothing in log */
-	if (size == 0) {
-		IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
-		return pos;
-	}
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log)
-		size = (size > DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES)
-			? DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES : size;
-#else
-	size = (size > DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES)
-		? DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES : size;
-#endif
-
-	IWL_ERR(priv, "Start IWL Event Log Dump: display last %d count\n",
-		  size);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (display) {
-		if (full_log)
-			bufsz = capacity * 48;
-		else
-			bufsz = size * 48;
-		*buf = kmalloc(bufsz, GFP_KERNEL);
-		if (!*buf)
-			return -ENOMEM;
-	}
-	if ((iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) {
-		/* if uCode has wrapped back to top of log,
-		 * start at the oldest entry,
-		 * i.e the next one that uCode would fill.
-		 */
-		if (num_wraps)
-			pos = iwl3945_print_event_log(priv, next_entry,
-						capacity - next_entry, mode,
-						pos, buf, bufsz);
-
-		/* (then/else) start at top of log */
-		pos = iwl3945_print_event_log(priv, 0, next_entry, mode,
-					      pos, buf, bufsz);
-	} else
-		pos = iwl3945_print_last_event_logs(priv, capacity, num_wraps,
-						    next_entry, size, mode,
-						    pos, buf, bufsz);
-#else
-	pos = iwl3945_print_last_event_logs(priv, capacity, num_wraps,
-					    next_entry, size, mode,
-					    pos, buf, bufsz);
-#endif
-	return pos;
-}
-
-static void iwl3945_irq_tasklet(struct iwl_priv *priv)
-{
-	u32 inta, handled = 0;
-	u32 inta_fh;
-	unsigned long flags;
-#ifdef CONFIG_IWLWIFI_DEBUG
-	u32 inta_mask;
-#endif
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	/* Ack/clear/reset pending uCode interrupts.
-	 * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
-	 *  and will clear only when CSR_FH_INT_STATUS gets cleared. */
-	inta = iwl_read32(priv, CSR_INT);
-	iwl_write32(priv, CSR_INT, inta);
-
-	/* Ack/clear/reset pending flow-handler (DMA) interrupts.
-	 * Any new interrupts that happen after this, either while we're
-	 * in this tasklet, or later, will show up in next ISR/tasklet. */
-	inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
-	iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
-		/* just for debug */
-		inta_mask = iwl_read32(priv, CSR_INT_MASK);
-		IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
-			      inta, inta_mask, inta_fh);
-	}
-#endif
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	/* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
-	 * atomic, make sure that inta covers all the interrupts that
-	 * we've discovered, even if FH interrupt came in just after
-	 * reading CSR_INT. */
-	if (inta_fh & CSR39_FH_INT_RX_MASK)
-		inta |= CSR_INT_BIT_FH_RX;
-	if (inta_fh & CSR39_FH_INT_TX_MASK)
-		inta |= CSR_INT_BIT_FH_TX;
-
-	/* Now service all interrupt bits discovered above. */
-	if (inta & CSR_INT_BIT_HW_ERR) {
-		IWL_ERR(priv, "Hardware error detected.  Restarting.\n");
-
-		/* Tell the device to stop sending interrupts */
-		iwl_disable_interrupts(priv);
-
-		priv->isr_stats.hw++;
-		iwl_irq_handle_error(priv);
-
-		handled |= CSR_INT_BIT_HW_ERR;
-
-		return;
-	}
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
-		/* NIC fires this, but we don't use it, redundant with WAKEUP */
-		if (inta & CSR_INT_BIT_SCD) {
-			IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
-				      "the frame/frames.\n");
-			priv->isr_stats.sch++;
-		}
-
-		/* Alive notification via Rx interrupt will do the real work */
-		if (inta & CSR_INT_BIT_ALIVE) {
-			IWL_DEBUG_ISR(priv, "Alive interrupt\n");
-			priv->isr_stats.alive++;
-		}
-	}
-#endif
-	/* Safely ignore these bits for debug checks below */
-	inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
-
-	/* Error detected by uCode */
-	if (inta & CSR_INT_BIT_SW_ERR) {
-		IWL_ERR(priv, "Microcode SW error detected. "
-			"Restarting 0x%X.\n", inta);
-		priv->isr_stats.sw++;
-		iwl_irq_handle_error(priv);
-		handled |= CSR_INT_BIT_SW_ERR;
-	}
-
-	/* uCode wakes up after power-down sleep */
-	if (inta & CSR_INT_BIT_WAKEUP) {
-		IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
-		iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
-		iwl_txq_update_write_ptr(priv, &priv->txq[0]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[1]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[2]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[3]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[4]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[5]);
-
-		priv->isr_stats.wakeup++;
-		handled |= CSR_INT_BIT_WAKEUP;
-	}
-
-	/* All uCode command responses, including Tx command responses,
-	 * Rx "responses" (frame-received notification), and other
-	 * notifications from uCode come through here*/
-	if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
-		iwl3945_rx_handle(priv);
-		priv->isr_stats.rx++;
-		handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
-	}
-
-	if (inta & CSR_INT_BIT_FH_TX) {
-		IWL_DEBUG_ISR(priv, "Tx interrupt\n");
-		priv->isr_stats.tx++;
-
-		iwl_write32(priv, CSR_FH_INT_STATUS, (1 << 6));
-		iwl_write_direct32(priv, FH39_TCSR_CREDIT
-					(FH39_SRVC_CHNL), 0x0);
-		handled |= CSR_INT_BIT_FH_TX;
-	}
-
-	if (inta & ~handled) {
-		IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
-		priv->isr_stats.unhandled++;
-	}
-
-	if (inta & ~priv->inta_mask) {
-		IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
-			 inta & ~priv->inta_mask);
-		IWL_WARN(priv, "   with FH_INT = 0x%08x\n", inta_fh);
-	}
-
-	/* Re-enable all interrupts */
-	/* only Re-enable if disabled by irq */
-	if (test_bit(STATUS_INT_ENABLED, &priv->status))
-		iwl_enable_interrupts(priv);
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
-		inta = iwl_read32(priv, CSR_INT);
-		inta_mask = iwl_read32(priv, CSR_INT_MASK);
-		inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
-		IWL_DEBUG_ISR(priv, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
-			"flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
-	}
-#endif
-}
-
-static int iwl3945_get_single_channel_for_scan(struct iwl_priv *priv,
-					       struct ieee80211_vif *vif,
-					       enum ieee80211_band band,
-					       struct iwl3945_scan_channel *scan_ch)
-{
-	const struct ieee80211_supported_band *sband;
-	u16 passive_dwell = 0;
-	u16 active_dwell = 0;
-	int added = 0;
-	u8 channel = 0;
-
-	sband = iwl_get_hw_mode(priv, band);
-	if (!sband) {
-		IWL_ERR(priv, "invalid band\n");
-		return added;
-	}
-
-	active_dwell = iwl_get_active_dwell_time(priv, band, 0);
-	passive_dwell = iwl_get_passive_dwell_time(priv, band, vif);
-
-	if (passive_dwell <= active_dwell)
-		passive_dwell = active_dwell + 1;
-
-
-	channel = iwl_get_single_channel_number(priv, band);
-
-	if (channel) {
-		scan_ch->channel = channel;
-		scan_ch->type = 0;	/* passive */
-		scan_ch->active_dwell = cpu_to_le16(active_dwell);
-		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
-		/* Set txpower levels to defaults */
-		scan_ch->tpc.dsp_atten = 110;
-		if (band == IEEE80211_BAND_5GHZ)
-			scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
-		else
-			scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
-		added++;
-	} else
-		IWL_ERR(priv, "no valid channel found\n");
-	return added;
-}
-
-static int iwl3945_get_channels_for_scan(struct iwl_priv *priv,
-					 enum ieee80211_band band,
-				     u8 is_active, u8 n_probes,
-				     struct iwl3945_scan_channel *scan_ch,
-				     struct ieee80211_vif *vif)
-{
-	struct ieee80211_channel *chan;
-	const struct ieee80211_supported_band *sband;
-	const struct iwl_channel_info *ch_info;
-	u16 passive_dwell = 0;
-	u16 active_dwell = 0;
-	int added, i;
-
-	sband = iwl_get_hw_mode(priv, band);
-	if (!sband)
-		return 0;
-
-	active_dwell = iwl_get_active_dwell_time(priv, band, n_probes);
-	passive_dwell = iwl_get_passive_dwell_time(priv, band, vif);
-
-	if (passive_dwell <= active_dwell)
-		passive_dwell = active_dwell + 1;
-
-	for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) {
-		chan = priv->scan_request->channels[i];
-
-		if (chan->band != band)
-			continue;
-
-		scan_ch->channel = chan->hw_value;
-
-		ch_info = iwl_get_channel_info(priv, band, scan_ch->channel);
-		if (!is_channel_valid(ch_info)) {
-			IWL_DEBUG_SCAN(priv, "Channel %d is INVALID for this band.\n",
-				       scan_ch->channel);
-			continue;
-		}
-
-		scan_ch->active_dwell = cpu_to_le16(active_dwell);
-		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
-		/* If passive , set up for auto-switch
-		 *  and use long active_dwell time.
-		 */
-		if (!is_active || is_channel_passive(ch_info) ||
-		    (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)) {
-			scan_ch->type = 0;	/* passive */
-			if (IWL_UCODE_API(priv->ucode_ver) == 1)
-				scan_ch->active_dwell = cpu_to_le16(passive_dwell - 1);
-		} else {
-			scan_ch->type = 1;	/* active */
-		}
-
-		/* Set direct probe bits. These may be used both for active
-		 * scan channels (probes gets sent right away),
-		 * or for passive channels (probes get se sent only after
-		 * hearing clear Rx packet).*/
-		if (IWL_UCODE_API(priv->ucode_ver) >= 2) {
-			if (n_probes)
-				scan_ch->type |= IWL39_SCAN_PROBE_MASK(n_probes);
-		} else {
-			/* uCode v1 does not allow setting direct probe bits on
-			 * passive channel. */
-			if ((scan_ch->type & 1) && n_probes)
-				scan_ch->type |= IWL39_SCAN_PROBE_MASK(n_probes);
-		}
-
-		/* Set txpower levels to defaults */
-		scan_ch->tpc.dsp_atten = 110;
-		/* scan_pwr_info->tpc.dsp_atten; */
-
-		/*scan_pwr_info->tpc.tx_gain; */
-		if (band == IEEE80211_BAND_5GHZ)
-			scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
-		else {
-			scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
-			/* NOTE: if we were doing 6Mb OFDM for scans we'd use
-			 * power level:
-			 * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
-			 */
-		}
-
-		IWL_DEBUG_SCAN(priv, "Scanning %d [%s %d]\n",
-			       scan_ch->channel,
-			       (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
-			       (scan_ch->type & 1) ?
-			       active_dwell : passive_dwell);
-
-		scan_ch++;
-		added++;
-	}
-
-	IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added);
-	return added;
-}
-
-static void iwl3945_init_hw_rates(struct iwl_priv *priv,
-			      struct ieee80211_rate *rates)
-{
-	int i;
-
-	for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
-		rates[i].bitrate = iwl3945_rates[i].ieee * 5;
-		rates[i].hw_value = i; /* Rate scaling will work on indexes */
-		rates[i].hw_value_short = i;
-		rates[i].flags = 0;
-		if ((i > IWL39_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) {
-			/*
-			 * If CCK != 1M then set short preamble rate flag.
-			 */
-			rates[i].flags |= (iwl3945_rates[i].plcp == 10) ?
-				0 : IEEE80211_RATE_SHORT_PREAMBLE;
-		}
-	}
-}
-
-/******************************************************************************
- *
- * uCode download functions
- *
- ******************************************************************************/
-
-static void iwl3945_dealloc_ucode_pci(struct iwl_priv *priv)
-{
-	iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code);
-	iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data);
-	iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
-	iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init);
-	iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data);
-	iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot);
-}
-
-/**
- * iwl3945_verify_inst_full - verify runtime uCode image in card vs. host,
- *     looking at all data.
- */
-static int iwl3945_verify_inst_full(struct iwl_priv *priv, __le32 *image, u32 len)
-{
-	u32 val;
-	u32 save_len = len;
-	int rc = 0;
-	u32 errcnt;
-
-	IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
-
-	iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
-			       IWL39_RTC_INST_LOWER_BOUND);
-
-	errcnt = 0;
-	for (; len > 0; len -= sizeof(u32), image++) {
-		/* read data comes through single port, auto-incr addr */
-		/* NOTE: Use the debugless read so we don't flood kernel log
-		 * if IWL_DL_IO is set */
-		val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
-		if (val != le32_to_cpu(*image)) {
-			IWL_ERR(priv, "uCode INST section is invalid at "
-				  "offset 0x%x, is 0x%x, s/b 0x%x\n",
-				  save_len - len, val, le32_to_cpu(*image));
-			rc = -EIO;
-			errcnt++;
-			if (errcnt >= 20)
-				break;
-		}
-	}
-
-
-	if (!errcnt)
-		IWL_DEBUG_INFO(priv,
-			"ucode image in INSTRUCTION memory is good\n");
-
-	return rc;
-}
-
-
-/**
- * iwl3945_verify_inst_sparse - verify runtime uCode image in card vs. host,
- *   using sample data 100 bytes apart.  If these sample points are good,
- *   it's a pretty good bet that everything between them is good, too.
- */
-static int iwl3945_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len)
-{
-	u32 val;
-	int rc = 0;
-	u32 errcnt = 0;
-	u32 i;
-
-	IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len);
-
-	for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
-		/* read data comes through single port, auto-incr addr */
-		/* NOTE: Use the debugless read so we don't flood kernel log
-		 * if IWL_DL_IO is set */
-		iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
-			i + IWL39_RTC_INST_LOWER_BOUND);
-		val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
-		if (val != le32_to_cpu(*image)) {
-#if 0 /* Enable this if you want to see details */
-			IWL_ERR(priv, "uCode INST section is invalid at "
-				  "offset 0x%x, is 0x%x, s/b 0x%x\n",
-				  i, val, *image);
-#endif
-			rc = -EIO;
-			errcnt++;
-			if (errcnt >= 3)
-				break;
-		}
-	}
-
-	return rc;
-}
-
-
-/**
- * iwl3945_verify_ucode - determine which instruction image is in SRAM,
- *    and verify its contents
- */
-static int iwl3945_verify_ucode(struct iwl_priv *priv)
-{
-	__le32 *image;
-	u32 len;
-	int rc = 0;
-
-	/* Try bootstrap */
-	image = (__le32 *)priv->ucode_boot.v_addr;
-	len = priv->ucode_boot.len;
-	rc = iwl3945_verify_inst_sparse(priv, image, len);
-	if (rc == 0) {
-		IWL_DEBUG_INFO(priv, "Bootstrap uCode is good in inst SRAM\n");
-		return 0;
-	}
-
-	/* Try initialize */
-	image = (__le32 *)priv->ucode_init.v_addr;
-	len = priv->ucode_init.len;
-	rc = iwl3945_verify_inst_sparse(priv, image, len);
-	if (rc == 0) {
-		IWL_DEBUG_INFO(priv, "Initialize uCode is good in inst SRAM\n");
-		return 0;
-	}
-
-	/* Try runtime/protocol */
-	image = (__le32 *)priv->ucode_code.v_addr;
-	len = priv->ucode_code.len;
-	rc = iwl3945_verify_inst_sparse(priv, image, len);
-	if (rc == 0) {
-		IWL_DEBUG_INFO(priv, "Runtime uCode is good in inst SRAM\n");
-		return 0;
-	}
-
-	IWL_ERR(priv, "NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
-
-	/* Since nothing seems to match, show first several data entries in
-	 * instruction SRAM, so maybe visual inspection will give a clue.
-	 * Selection of bootstrap image (vs. other images) is arbitrary. */
-	image = (__le32 *)priv->ucode_boot.v_addr;
-	len = priv->ucode_boot.len;
-	rc = iwl3945_verify_inst_full(priv, image, len);
-
-	return rc;
-}
-
-static void iwl3945_nic_start(struct iwl_priv *priv)
-{
-	/* Remove all resets to allow NIC to operate */
-	iwl_write32(priv, CSR_RESET, 0);
-}
-
-#define IWL3945_UCODE_GET(item)						\
-static u32 iwl3945_ucode_get_##item(const struct iwl_ucode_header *ucode)\
-{									\
-	return le32_to_cpu(ucode->u.v1.item);				\
-}
-
-static u32 iwl3945_ucode_get_header_size(u32 api_ver)
-{
-	return 24;
-}
-
-static u8 *iwl3945_ucode_get_data(const struct iwl_ucode_header *ucode)
-{
-	return (u8 *) ucode->u.v1.data;
-}
-
-IWL3945_UCODE_GET(inst_size);
-IWL3945_UCODE_GET(data_size);
-IWL3945_UCODE_GET(init_size);
-IWL3945_UCODE_GET(init_data_size);
-IWL3945_UCODE_GET(boot_size);
-
-/**
- * iwl3945_read_ucode - Read uCode images from disk file.
- *
- * Copy into buffers for card to fetch via bus-mastering
- */
-static int iwl3945_read_ucode(struct iwl_priv *priv)
-{
-	const struct iwl_ucode_header *ucode;
-	int ret = -EINVAL, index;
-	const struct firmware *ucode_raw;
-	/* firmware file name contains uCode/driver compatibility version */
-	const char *name_pre = priv->cfg->fw_name_pre;
-	const unsigned int api_max = priv->cfg->ucode_api_max;
-	const unsigned int api_min = priv->cfg->ucode_api_min;
-	char buf[25];
-	u8 *src;
-	size_t len;
-	u32 api_ver, inst_size, data_size, init_size, init_data_size, boot_size;
-
-	/* Ask kernel firmware_class module to get the boot firmware off disk.
-	 * request_firmware() is synchronous, file is in memory on return. */
-	for (index = api_max; index >= api_min; index--) {
-		sprintf(buf, "%s%u%s", name_pre, index, ".ucode");
-		ret = request_firmware(&ucode_raw, buf, &priv->pci_dev->dev);
-		if (ret < 0) {
-			IWL_ERR(priv, "%s firmware file req failed: %d\n",
-				  buf, ret);
-			if (ret == -ENOENT)
-				continue;
-			else
-				goto error;
-		} else {
-			if (index < api_max)
-				IWL_ERR(priv, "Loaded firmware %s, "
-					"which is deprecated. "
-					" Please use API v%u instead.\n",
-					  buf, api_max);
-			IWL_DEBUG_INFO(priv, "Got firmware '%s' file "
-				       "(%zd bytes) from disk\n",
-				       buf, ucode_raw->size);
-			break;
-		}
-	}
-
-	if (ret < 0)
-		goto error;
-
-	/* Make sure that we got at least our header! */
-	if (ucode_raw->size <  iwl3945_ucode_get_header_size(1)) {
-		IWL_ERR(priv, "File size way too small!\n");
-		ret = -EINVAL;
-		goto err_release;
-	}
-
-	/* Data from ucode file:  header followed by uCode images */
-	ucode = (struct iwl_ucode_header *)ucode_raw->data;
-
-	priv->ucode_ver = le32_to_cpu(ucode->ver);
-	api_ver = IWL_UCODE_API(priv->ucode_ver);
-	inst_size = iwl3945_ucode_get_inst_size(ucode);
-	data_size = iwl3945_ucode_get_data_size(ucode);
-	init_size = iwl3945_ucode_get_init_size(ucode);
-	init_data_size = iwl3945_ucode_get_init_data_size(ucode);
-	boot_size = iwl3945_ucode_get_boot_size(ucode);
-	src = iwl3945_ucode_get_data(ucode);
-
-	/* api_ver should match the api version forming part of the
-	 * firmware filename ... but we don't check for that and only rely
-	 * on the API version read from firmware header from here on forward */
-
-	if (api_ver < api_min || api_ver > api_max) {
-		IWL_ERR(priv, "Driver unable to support your firmware API. "
-			  "Driver supports v%u, firmware is v%u.\n",
-			  api_max, api_ver);
-		priv->ucode_ver = 0;
-		ret = -EINVAL;
-		goto err_release;
-	}
-	if (api_ver != api_max)
-		IWL_ERR(priv, "Firmware has old API version. Expected %u, "
-			  "got %u. New firmware can be obtained "
-			  "from http://www.intellinuxwireless.org.\n",
-			  api_max, api_ver);
-
-	IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u\n",
-		IWL_UCODE_MAJOR(priv->ucode_ver),
-		IWL_UCODE_MINOR(priv->ucode_ver),
-		IWL_UCODE_API(priv->ucode_ver),
-		IWL_UCODE_SERIAL(priv->ucode_ver));
-
-	snprintf(priv->hw->wiphy->fw_version,
-		 sizeof(priv->hw->wiphy->fw_version),
-		 "%u.%u.%u.%u",
-		 IWL_UCODE_MAJOR(priv->ucode_ver),
-		 IWL_UCODE_MINOR(priv->ucode_ver),
-		 IWL_UCODE_API(priv->ucode_ver),
-		 IWL_UCODE_SERIAL(priv->ucode_ver));
-
-	IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n",
-		       priv->ucode_ver);
-	IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %u\n",
-		       inst_size);
-	IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %u\n",
-		       data_size);
-	IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %u\n",
-		       init_size);
-	IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %u\n",
-		       init_data_size);
-	IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %u\n",
-		       boot_size);
-
-
-	/* Verify size of file vs. image size info in file's header */
-	if (ucode_raw->size != iwl3945_ucode_get_header_size(api_ver) +
-		inst_size + data_size + init_size +
-		init_data_size + boot_size) {
-
-		IWL_DEBUG_INFO(priv,
-			"uCode file size %zd does not match expected size\n",
-			ucode_raw->size);
-		ret = -EINVAL;
-		goto err_release;
-	}
-
-	/* Verify that uCode images will fit in card's SRAM */
-	if (inst_size > IWL39_MAX_INST_SIZE) {
-		IWL_DEBUG_INFO(priv, "uCode instr len %d too large to fit in\n",
-			       inst_size);
-		ret = -EINVAL;
-		goto err_release;
-	}
-
-	if (data_size > IWL39_MAX_DATA_SIZE) {
-		IWL_DEBUG_INFO(priv, "uCode data len %d too large to fit in\n",
-			       data_size);
-		ret = -EINVAL;
-		goto err_release;
-	}
-	if (init_size > IWL39_MAX_INST_SIZE) {
-		IWL_DEBUG_INFO(priv,
-				"uCode init instr len %d too large to fit in\n",
-				init_size);
-		ret = -EINVAL;
-		goto err_release;
-	}
-	if (init_data_size > IWL39_MAX_DATA_SIZE) {
-		IWL_DEBUG_INFO(priv,
-				"uCode init data len %d too large to fit in\n",
-				init_data_size);
-		ret = -EINVAL;
-		goto err_release;
-	}
-	if (boot_size > IWL39_MAX_BSM_SIZE) {
-		IWL_DEBUG_INFO(priv,
-				"uCode boot instr len %d too large to fit in\n",
-				boot_size);
-		ret = -EINVAL;
-		goto err_release;
-	}
-
-	/* Allocate ucode buffers for card's bus-master loading ... */
-
-	/* Runtime instructions and 2 copies of data:
-	 * 1) unmodified from disk
-	 * 2) backup cache for save/restore during power-downs */
-	priv->ucode_code.len = inst_size;
-	iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code);
-
-	priv->ucode_data.len = data_size;
-	iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data);
-
-	priv->ucode_data_backup.len = data_size;
-	iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
-
-	if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr ||
-	    !priv->ucode_data_backup.v_addr)
-		goto err_pci_alloc;
-
-	/* Initialization instructions and data */
-	if (init_size && init_data_size) {
-		priv->ucode_init.len = init_size;
-		iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init);
-
-		priv->ucode_init_data.len = init_data_size;
-		iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data);
-
-		if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr)
-			goto err_pci_alloc;
-	}
-
-	/* Bootstrap (instructions only, no data) */
-	if (boot_size) {
-		priv->ucode_boot.len = boot_size;
-		iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot);
-
-		if (!priv->ucode_boot.v_addr)
-			goto err_pci_alloc;
-	}
-
-	/* Copy images into buffers for card's bus-master reads ... */
-
-	/* Runtime instructions (first block of data in file) */
-	len = inst_size;
-	IWL_DEBUG_INFO(priv,
-		"Copying (but not loading) uCode instr len %zd\n", len);
-	memcpy(priv->ucode_code.v_addr, src, len);
-	src += len;
-
-	IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
-		priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
-
-	/* Runtime data (2nd block)
-	 * NOTE:  Copy into backup buffer will be done in iwl3945_up()  */
-	len = data_size;
-	IWL_DEBUG_INFO(priv,
-		"Copying (but not loading) uCode data len %zd\n", len);
-	memcpy(priv->ucode_data.v_addr, src, len);
-	memcpy(priv->ucode_data_backup.v_addr, src, len);
-	src += len;
-
-	/* Initialization instructions (3rd block) */
-	if (init_size) {
-		len = init_size;
-		IWL_DEBUG_INFO(priv,
-			"Copying (but not loading) init instr len %zd\n", len);
-		memcpy(priv->ucode_init.v_addr, src, len);
-		src += len;
-	}
-
-	/* Initialization data (4th block) */
-	if (init_data_size) {
-		len = init_data_size;
-		IWL_DEBUG_INFO(priv,
-			"Copying (but not loading) init data len %zd\n", len);
-		memcpy(priv->ucode_init_data.v_addr, src, len);
-		src += len;
-	}
-
-	/* Bootstrap instructions (5th block) */
-	len = boot_size;
-	IWL_DEBUG_INFO(priv,
-		"Copying (but not loading) boot instr len %zd\n", len);
-	memcpy(priv->ucode_boot.v_addr, src, len);
-
-	/* We have our copies now, allow OS release its copies */
-	release_firmware(ucode_raw);
-	return 0;
-
- err_pci_alloc:
-	IWL_ERR(priv, "failed to allocate pci memory\n");
-	ret = -ENOMEM;
-	iwl3945_dealloc_ucode_pci(priv);
-
- err_release:
-	release_firmware(ucode_raw);
-
- error:
-	return ret;
-}
-
-
-/**
- * iwl3945_set_ucode_ptrs - Set uCode address location
- *
- * Tell initialization uCode where to find runtime uCode.
- *
- * BSM registers initially contain pointers to initialization uCode.
- * We need to replace them to load runtime uCode inst and data,
- * and to save runtime data when powering down.
- */
-static int iwl3945_set_ucode_ptrs(struct iwl_priv *priv)
-{
-	dma_addr_t pinst;
-	dma_addr_t pdata;
-
-	/* bits 31:0 for 3945 */
-	pinst = priv->ucode_code.p_addr;
-	pdata = priv->ucode_data_backup.p_addr;
-
-	/* Tell bootstrap uCode where to find image to load */
-	iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
-	iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
-	iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG,
-				 priv->ucode_data.len);
-
-	/* Inst byte count must be last to set up, bit 31 signals uCode
-	 *   that all new ptr/size info is in place */
-	iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG,
-				 priv->ucode_code.len | BSM_DRAM_INST_LOAD);
-
-	IWL_DEBUG_INFO(priv, "Runtime uCode pointers are set.\n");
-
-	return 0;
-}
-
-/**
- * iwl3945_init_alive_start - Called after REPLY_ALIVE notification received
- *
- * Called after REPLY_ALIVE notification received from "initialize" uCode.
- *
- * Tell "initialize" uCode to go ahead and load the runtime uCode.
- */
-static void iwl3945_init_alive_start(struct iwl_priv *priv)
-{
-	/* Check alive response for "valid" sign from uCode */
-	if (priv->card_alive_init.is_valid != UCODE_VALID_OK) {
-		/* We had an error bringing up the hardware, so take it
-		 * all the way back down so we can try again */
-		IWL_DEBUG_INFO(priv, "Initialize Alive failed.\n");
-		goto restart;
-	}
-
-	/* Bootstrap uCode has loaded initialize uCode ... verify inst image.
-	 * This is a paranoid check, because we would not have gotten the
-	 * "initialize" alive if code weren't properly loaded.  */
-	if (iwl3945_verify_ucode(priv)) {
-		/* Runtime instruction load was bad;
-		 * take it all the way back down so we can try again */
-		IWL_DEBUG_INFO(priv, "Bad \"initialize\" uCode load.\n");
-		goto restart;
-	}
-
-	/* Send pointers to protocol/runtime uCode image ... init code will
-	 * load and launch runtime uCode, which will send us another "Alive"
-	 * notification. */
-	IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
-	if (iwl3945_set_ucode_ptrs(priv)) {
-		/* Runtime instruction load won't happen;
-		 * take it all the way back down so we can try again */
-		IWL_DEBUG_INFO(priv, "Couldn't set up uCode pointers.\n");
-		goto restart;
-	}
-	return;
-
- restart:
-	queue_work(priv->workqueue, &priv->restart);
-}
-
-/**
- * iwl3945_alive_start - called after REPLY_ALIVE notification received
- *                   from protocol/runtime uCode (initialization uCode's
- *                   Alive gets handled by iwl3945_init_alive_start()).
- */
-static void iwl3945_alive_start(struct iwl_priv *priv)
-{
-	int thermal_spin = 0;
-	u32 rfkill;
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
-	IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
-
-	if (priv->card_alive.is_valid != UCODE_VALID_OK) {
-		/* We had an error bringing up the hardware, so take it
-		 * all the way back down so we can try again */
-		IWL_DEBUG_INFO(priv, "Alive failed.\n");
-		goto restart;
-	}
-
-	/* Initialize uCode has loaded Runtime uCode ... verify inst image.
-	 * This is a paranoid check, because we would not have gotten the
-	 * "runtime" alive if code weren't properly loaded.  */
-	if (iwl3945_verify_ucode(priv)) {
-		/* Runtime instruction load was bad;
-		 * take it all the way back down so we can try again */
-		IWL_DEBUG_INFO(priv, "Bad runtime uCode load.\n");
-		goto restart;
-	}
-
-	rfkill = iwl_read_prph(priv, APMG_RFKILL_REG);
-	IWL_DEBUG_INFO(priv, "RFKILL status: 0x%x\n", rfkill);
-
-	if (rfkill & 0x1) {
-		clear_bit(STATUS_RF_KILL_HW, &priv->status);
-		/* if RFKILL is not on, then wait for thermal
-		 * sensor in adapter to kick in */
-		while (iwl3945_hw_get_temperature(priv) == 0) {
-			thermal_spin++;
-			udelay(10);
-		}
-
-		if (thermal_spin)
-			IWL_DEBUG_INFO(priv, "Thermal calibration took %dus\n",
-				       thermal_spin * 10);
-	} else
-		set_bit(STATUS_RF_KILL_HW, &priv->status);
-
-	/* After the ALIVE response, we can send commands to 3945 uCode */
-	set_bit(STATUS_ALIVE, &priv->status);
-
-	/* Enable watchdog to monitor the driver tx queues */
-	iwl_setup_watchdog(priv);
-
-	if (iwl_is_rfkill(priv))
-		return;
-
-	ieee80211_wake_queues(priv->hw);
-
-	priv->active_rate = IWL_RATES_MASK_3945;
-
-	iwl_power_update_mode(priv, true);
-
-	if (iwl_is_associated(priv, IWL_RXON_CTX_BSS)) {
-		struct iwl3945_rxon_cmd *active_rxon =
-				(struct iwl3945_rxon_cmd *)(&ctx->active);
-
-		ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
-		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-	} else {
-		/* Initialize our rx_config data */
-		iwl_connection_init_rx_config(priv, ctx);
-	}
-
-	/* Configure Bluetooth device coexistence support */
-	priv->cfg->ops->hcmd->send_bt_config(priv);
-
-	set_bit(STATUS_READY, &priv->status);
-
-	/* Configure the adapter for unassociated operation */
-	iwl3945_commit_rxon(priv, ctx);
-
-	iwl3945_reg_txpower_periodic(priv);
-
-	IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
-	wake_up_interruptible(&priv->wait_command_queue);
-
-	return;
-
- restart:
-	queue_work(priv->workqueue, &priv->restart);
-}
-
-static void iwl3945_cancel_deferred_work(struct iwl_priv *priv);
-
-static void __iwl3945_down(struct iwl_priv *priv)
-{
-	unsigned long flags;
-	int exit_pending;
-
-	IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
-
-	iwl_scan_cancel_timeout(priv, 200);
-
-	exit_pending = test_and_set_bit(STATUS_EXIT_PENDING, &priv->status);
-
-	/* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
-	 * to prevent rearm timer */
-	del_timer_sync(&priv->watchdog);
-
-	/* Station information will now be cleared in device */
-	iwl_clear_ucode_stations(priv, NULL);
-	iwl_dealloc_bcast_stations(priv);
-	iwl_clear_driver_stations(priv);
-
-	/* Unblock any waiting calls */
-	wake_up_interruptible_all(&priv->wait_command_queue);
-
-	/* Wipe out the EXIT_PENDING status bit if we are not actually
-	 * exiting the module */
-	if (!exit_pending)
-		clear_bit(STATUS_EXIT_PENDING, &priv->status);
-
-	/* stop and reset the on-board processor */
-	iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
-
-	/* tell the device to stop sending interrupts */
-	spin_lock_irqsave(&priv->lock, flags);
-	iwl_disable_interrupts(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-	iwl_synchronize_irq(priv);
-
-	if (priv->mac80211_registered)
-		ieee80211_stop_queues(priv->hw);
-
-	/* If we have not previously called iwl3945_init() then
-	 * clear all bits but the RF Kill bits and return */
-	if (!iwl_is_init(priv)) {
-		priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
-					STATUS_RF_KILL_HW |
-			       test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
-					STATUS_GEO_CONFIGURED |
-				test_bit(STATUS_EXIT_PENDING, &priv->status) <<
-					STATUS_EXIT_PENDING;
-		goto exit;
-	}
-
-	/* ...otherwise clear out all the status bits but the RF Kill
-	 * bit and continue taking the NIC down. */
-	priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
-				STATUS_RF_KILL_HW |
-			test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
-				STATUS_GEO_CONFIGURED |
-			test_bit(STATUS_FW_ERROR, &priv->status) <<
-				STATUS_FW_ERROR |
-			test_bit(STATUS_EXIT_PENDING, &priv->status) <<
-				STATUS_EXIT_PENDING;
-
-	iwl3945_hw_txq_ctx_stop(priv);
-	iwl3945_hw_rxq_stop(priv);
-
-	/* Power-down device's busmaster DMA clocks */
-	iwl_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
-	udelay(5);
-
-	/* Stop the device, and put it in low power state */
-	iwl_apm_stop(priv);
-
- exit:
-	memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
-
-	if (priv->beacon_skb)
-		dev_kfree_skb(priv->beacon_skb);
-	priv->beacon_skb = NULL;
-
-	/* clear out any free frames */
-	iwl3945_clear_free_frames(priv);
-}
-
-static void iwl3945_down(struct iwl_priv *priv)
-{
-	mutex_lock(&priv->mutex);
-	__iwl3945_down(priv);
-	mutex_unlock(&priv->mutex);
-
-	iwl3945_cancel_deferred_work(priv);
-}
-
-#define MAX_HW_RESTARTS 5
-
-static int iwl3945_alloc_bcast_station(struct iwl_priv *priv)
-{
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-	unsigned long flags;
-	u8 sta_id;
-
-	spin_lock_irqsave(&priv->sta_lock, flags);
-	sta_id = iwl_prep_station(priv, ctx, iwl_bcast_addr, false, NULL);
-	if (sta_id == IWL_INVALID_STATION) {
-		IWL_ERR(priv, "Unable to prepare broadcast station\n");
-		spin_unlock_irqrestore(&priv->sta_lock, flags);
-
-		return -EINVAL;
-	}
-
-	priv->stations[sta_id].used |= IWL_STA_DRIVER_ACTIVE;
-	priv->stations[sta_id].used |= IWL_STA_BCAST;
-	spin_unlock_irqrestore(&priv->sta_lock, flags);
-
-	return 0;
-}
-
-static int __iwl3945_up(struct iwl_priv *priv)
-{
-	int rc, i;
-
-	rc = iwl3945_alloc_bcast_station(priv);
-	if (rc)
-		return rc;
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
-		IWL_WARN(priv, "Exit pending; will not bring the NIC up\n");
-		return -EIO;
-	}
-
-	if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
-		IWL_ERR(priv, "ucode not available for device bring up\n");
-		return -EIO;
-	}
-
-	/* If platform's RF_KILL switch is NOT set to KILL */
-	if (iwl_read32(priv, CSR_GP_CNTRL) &
-				CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
-		clear_bit(STATUS_RF_KILL_HW, &priv->status);
-	else {
-		set_bit(STATUS_RF_KILL_HW, &priv->status);
-		IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n");
-		return -ENODEV;
-	}
-
-	iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
-
-	rc = iwl3945_hw_nic_init(priv);
-	if (rc) {
-		IWL_ERR(priv, "Unable to int nic\n");
-		return rc;
-	}
-
-	/* make sure rfkill handshake bits are cleared */
-	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
-		    CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-
-	/* clear (again), then enable host interrupts */
-	iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
-	iwl_enable_interrupts(priv);
-
-	/* really make sure rfkill handshake bits are cleared */
-	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-
-	/* Copy original ucode data image from disk into backup cache.
-	 * This will be used to initialize the on-board processor's
-	 * data SRAM for a clean start when the runtime program first loads. */
-	memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
-	       priv->ucode_data.len);
-
-	/* We return success when we resume from suspend and rf_kill is on. */
-	if (test_bit(STATUS_RF_KILL_HW, &priv->status))
-		return 0;
-
-	for (i = 0; i < MAX_HW_RESTARTS; i++) {
-
-		/* load bootstrap state machine,
-		 * load bootstrap program into processor's memory,
-		 * prepare to load the "initialize" uCode */
-		rc = priv->cfg->ops->lib->load_ucode(priv);
-
-		if (rc) {
-			IWL_ERR(priv,
-				"Unable to set up bootstrap uCode: %d\n", rc);
-			continue;
-		}
-
-		/* start card; "initialize" will load runtime ucode */
-		iwl3945_nic_start(priv);
-
-		IWL_DEBUG_INFO(priv, DRV_NAME " is coming up\n");
-
-		return 0;
-	}
-
-	set_bit(STATUS_EXIT_PENDING, &priv->status);
-	__iwl3945_down(priv);
-	clear_bit(STATUS_EXIT_PENDING, &priv->status);
-
-	/* tried to restart and config the device for as long as our
-	 * patience could withstand */
-	IWL_ERR(priv, "Unable to initialize device after %d attempts.\n", i);
-	return -EIO;
-}
-
-
-/*****************************************************************************
- *
- * Workqueue callbacks
- *
- *****************************************************************************/
-
-static void iwl3945_bg_init_alive_start(struct work_struct *data)
-{
-	struct iwl_priv *priv =
-	    container_of(data, struct iwl_priv, init_alive_start.work);
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	mutex_lock(&priv->mutex);
-	iwl3945_init_alive_start(priv);
-	mutex_unlock(&priv->mutex);
-}
-
-static void iwl3945_bg_alive_start(struct work_struct *data)
-{
-	struct iwl_priv *priv =
-	    container_of(data, struct iwl_priv, alive_start.work);
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	mutex_lock(&priv->mutex);
-	iwl3945_alive_start(priv);
-	mutex_unlock(&priv->mutex);
-}
-
-/*
- * 3945 cannot interrupt driver when hardware rf kill switch toggles;
- * driver must poll CSR_GP_CNTRL_REG register for change.  This register
- * *is* readable even when device has been SW_RESET into low power mode
- * (e.g. during RF KILL).
- */
-static void iwl3945_rfkill_poll(struct work_struct *data)
-{
-	struct iwl_priv *priv =
-	    container_of(data, struct iwl_priv, _3945.rfkill_poll.work);
-	bool old_rfkill = test_bit(STATUS_RF_KILL_HW, &priv->status);
-	bool new_rfkill = !(iwl_read32(priv, CSR_GP_CNTRL)
-			& CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW);
-
-	if (new_rfkill != old_rfkill) {
-		if (new_rfkill)
-			set_bit(STATUS_RF_KILL_HW, &priv->status);
-		else
-			clear_bit(STATUS_RF_KILL_HW, &priv->status);
-
-		wiphy_rfkill_set_hw_state(priv->hw->wiphy, new_rfkill);
-
-		IWL_DEBUG_RF_KILL(priv, "RF_KILL bit toggled to %s.\n",
-				new_rfkill ? "disable radio" : "enable radio");
-	}
-
-	/* Keep this running, even if radio now enabled.  This will be
-	 * cancelled in mac_start() if system decides to start again */
-	queue_delayed_work(priv->workqueue, &priv->_3945.rfkill_poll,
-			   round_jiffies_relative(2 * HZ));
-
-}
-
-int iwl3945_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
-{
-	struct iwl_host_cmd cmd = {
-		.id = REPLY_SCAN_CMD,
-		.len = sizeof(struct iwl3945_scan_cmd),
-		.flags = CMD_SIZE_HUGE,
-	};
-	struct iwl3945_scan_cmd *scan;
-	u8 n_probes = 0;
-	enum ieee80211_band band;
-	bool is_active = false;
-	int ret;
-
-	lockdep_assert_held(&priv->mutex);
-
-	if (!priv->scan_cmd) {
-		priv->scan_cmd = kmalloc(sizeof(struct iwl3945_scan_cmd) +
-					 IWL_MAX_SCAN_SIZE, GFP_KERNEL);
-		if (!priv->scan_cmd) {
-			IWL_DEBUG_SCAN(priv, "Fail to allocate scan memory\n");
-			return -ENOMEM;
-		}
-	}
-	scan = priv->scan_cmd;
-	memset(scan, 0, sizeof(struct iwl3945_scan_cmd) + IWL_MAX_SCAN_SIZE);
-
-	scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
-	scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
-
-	if (iwl_is_associated(priv, IWL_RXON_CTX_BSS)) {
-		u16 interval = 0;
-		u32 extra;
-		u32 suspend_time = 100;
-		u32 scan_suspend_time = 100;
-
-		IWL_DEBUG_INFO(priv, "Scanning while associated...\n");
-
-		if (priv->is_internal_short_scan)
-			interval = 0;
-		else
-			interval = vif->bss_conf.beacon_int;
-
-		scan->suspend_time = 0;
-		scan->max_out_time = cpu_to_le32(200 * 1024);
-		if (!interval)
-			interval = suspend_time;
-		/*
-		 * suspend time format:
-		 *  0-19: beacon interval in usec (time before exec.)
-		 * 20-23: 0
-		 * 24-31: number of beacons (suspend between channels)
-		 */
-
-		extra = (suspend_time / interval) << 24;
-		scan_suspend_time = 0xFF0FFFFF &
-		    (extra | ((suspend_time % interval) * 1024));
-
-		scan->suspend_time = cpu_to_le32(scan_suspend_time);
-		IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n",
-			       scan_suspend_time, interval);
-	}
-
-	if (priv->is_internal_short_scan) {
-		IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
-	} else if (priv->scan_request->n_ssids) {
-		int i, p = 0;
-		IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
-		for (i = 0; i < priv->scan_request->n_ssids; i++) {
-			/* always does wildcard anyway */
-			if (!priv->scan_request->ssids[i].ssid_len)
-				continue;
-			scan->direct_scan[p].id = WLAN_EID_SSID;
-			scan->direct_scan[p].len =
-				priv->scan_request->ssids[i].ssid_len;
-			memcpy(scan->direct_scan[p].ssid,
-			       priv->scan_request->ssids[i].ssid,
-			       priv->scan_request->ssids[i].ssid_len);
-			n_probes++;
-			p++;
-		}
-		is_active = true;
-	} else
-		IWL_DEBUG_SCAN(priv, "Kicking off passive scan.\n");
-
-	/* We don't build a direct scan probe request; the uCode will do
-	 * that based on the direct_mask added to each channel entry */
-	scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
-	scan->tx_cmd.sta_id = priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id;
-	scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
-
-	/* flags + rate selection */
-
-	switch (priv->scan_band) {
-	case IEEE80211_BAND_2GHZ:
-		scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
-		scan->tx_cmd.rate = IWL_RATE_1M_PLCP;
-		band = IEEE80211_BAND_2GHZ;
-		break;
-	case IEEE80211_BAND_5GHZ:
-		scan->tx_cmd.rate = IWL_RATE_6M_PLCP;
-		band = IEEE80211_BAND_5GHZ;
-		break;
-	default:
-		IWL_WARN(priv, "Invalid scan band\n");
-		return -EIO;
-	}
-
-	/*
-	 * If active scaning is requested but a certain channel
-	 * is marked passive, we can do active scanning if we
-	 * detect transmissions.
-	 */
-	scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
-					IWL_GOOD_CRC_TH_DISABLED;
-
-	if (!priv->is_internal_short_scan) {
-		scan->tx_cmd.len = cpu_to_le16(
-			iwl_fill_probe_req(priv,
-				(struct ieee80211_mgmt *)scan->data,
-				vif->addr,
-				priv->scan_request->ie,
-				priv->scan_request->ie_len,
-				IWL_MAX_SCAN_SIZE - sizeof(*scan)));
-	} else {
-		/* use bcast addr, will not be transmitted but must be valid */
-		scan->tx_cmd.len = cpu_to_le16(
-			iwl_fill_probe_req(priv,
-				(struct ieee80211_mgmt *)scan->data,
-				iwl_bcast_addr, NULL, 0,
-				IWL_MAX_SCAN_SIZE - sizeof(*scan)));
-	}
-	/* select Rx antennas */
-	scan->flags |= iwl3945_get_antenna_flags(priv);
-
-	if (priv->is_internal_short_scan) {
-		scan->channel_count =
-			iwl3945_get_single_channel_for_scan(priv, vif, band,
-				(void *)&scan->data[le16_to_cpu(
-				scan->tx_cmd.len)]);
-	} else {
-		scan->channel_count =
-			iwl3945_get_channels_for_scan(priv, band, is_active, n_probes,
-				(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)], vif);
-	}
-
-	if (scan->channel_count == 0) {
-		IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
-		return -EIO;
-	}
-
-	cmd.len += le16_to_cpu(scan->tx_cmd.len) +
-	    scan->channel_count * sizeof(struct iwl3945_scan_channel);
-	cmd.data = scan;
-	scan->len = cpu_to_le16(cmd.len);
-
-	set_bit(STATUS_SCAN_HW, &priv->status);
-	ret = iwl_send_cmd_sync(priv, &cmd);
-	if (ret)
-		clear_bit(STATUS_SCAN_HW, &priv->status);
-	return ret;
-}
-
-void iwl3945_post_scan(struct iwl_priv *priv)
-{
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
-	/*
-	 * Since setting the RXON may have been deferred while
-	 * performing the scan, fire one off if needed
-	 */
-	if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
-		iwl3945_commit_rxon(priv, ctx);
-}
-
-static void iwl3945_bg_restart(struct work_struct *data)
-{
-	struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
-		struct iwl_rxon_context *ctx;
-		mutex_lock(&priv->mutex);
-		for_each_context(priv, ctx)
-			ctx->vif = NULL;
-		priv->is_open = 0;
-		mutex_unlock(&priv->mutex);
-		iwl3945_down(priv);
-		ieee80211_restart_hw(priv->hw);
-	} else {
-		iwl3945_down(priv);
-
-		if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-			return;
-
-		mutex_lock(&priv->mutex);
-		__iwl3945_up(priv);
-		mutex_unlock(&priv->mutex);
-	}
-}
-
-static void iwl3945_bg_rx_replenish(struct work_struct *data)
-{
-	struct iwl_priv *priv =
-	    container_of(data, struct iwl_priv, rx_replenish);
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	mutex_lock(&priv->mutex);
-	iwl3945_rx_replenish(priv);
-	mutex_unlock(&priv->mutex);
-}
-
-void iwl3945_post_associate(struct iwl_priv *priv)
-{
-	int rc = 0;
-	struct ieee80211_conf *conf = NULL;
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
-	if (!ctx->vif || !priv->is_open)
-		return;
-
-	if (ctx->vif->type == NL80211_IFTYPE_AP) {
-		IWL_ERR(priv, "%s Should not be called in AP mode\n", __func__);
-		return;
-	}
-
-	IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n",
-			ctx->vif->bss_conf.aid, ctx->active.bssid_addr);
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	iwl_scan_cancel_timeout(priv, 200);
-
-	conf = ieee80211_get_hw_conf(priv->hw);
-
-	ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-	iwl3945_commit_rxon(priv, ctx);
-
-	rc = iwl_send_rxon_timing(priv, ctx);
-	if (rc)
-		IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
-			    "Attempting to continue.\n");
-
-	ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
-
-	ctx->staging.assoc_id = cpu_to_le16(ctx->vif->bss_conf.aid);
-
-	IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n",
-			ctx->vif->bss_conf.aid, ctx->vif->bss_conf.beacon_int);
-
-	if (ctx->vif->bss_conf.use_short_preamble)
-		ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
-	else
-		ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
-
-	if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
-		if (ctx->vif->bss_conf.use_short_slot)
-			ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
-		else
-			ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
-	}
-
-	iwl3945_commit_rxon(priv, ctx);
-
-	switch (ctx->vif->type) {
-	case NL80211_IFTYPE_STATION:
-		iwl3945_rate_scale_init(priv->hw, IWL_AP_ID);
-		break;
-	case NL80211_IFTYPE_ADHOC:
-		iwl3945_send_beacon_cmd(priv);
-		break;
-	default:
-		IWL_ERR(priv, "%s Should not be called in %d mode\n",
-			__func__, ctx->vif->type);
-		break;
-	}
-}
-
-/*****************************************************************************
- *
- * mac80211 entry point functions
- *
- *****************************************************************************/
-
-#define UCODE_READY_TIMEOUT	(2 * HZ)
-
-static int iwl3945_mac_start(struct ieee80211_hw *hw)
-{
-	struct iwl_priv *priv = hw->priv;
-	int ret;
-
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	/* we should be verifying the device is ready to be opened */
-	mutex_lock(&priv->mutex);
-
-	/* fetch ucode file from disk, alloc and copy to bus-master buffers ...
-	 * ucode filename and max sizes are card-specific. */
-
-	if (!priv->ucode_code.len) {
-		ret = iwl3945_read_ucode(priv);
-		if (ret) {
-			IWL_ERR(priv, "Could not read microcode: %d\n", ret);
-			mutex_unlock(&priv->mutex);
-			goto out_release_irq;
-		}
-	}
-
-	ret = __iwl3945_up(priv);
-
-	mutex_unlock(&priv->mutex);
-
-	if (ret)
-		goto out_release_irq;
-
-	IWL_DEBUG_INFO(priv, "Start UP work.\n");
-
-	/* Wait for START_ALIVE from ucode. Otherwise callbacks from
-	 * mac80211 will not be run successfully. */
-	ret = wait_event_interruptible_timeout(priv->wait_command_queue,
-			test_bit(STATUS_READY, &priv->status),
-			UCODE_READY_TIMEOUT);
-	if (!ret) {
-		if (!test_bit(STATUS_READY, &priv->status)) {
-			IWL_ERR(priv,
-				"Wait for START_ALIVE timeout after %dms.\n",
-				jiffies_to_msecs(UCODE_READY_TIMEOUT));
-			ret = -ETIMEDOUT;
-			goto out_release_irq;
-		}
-	}
-
-	/* ucode is running and will send rfkill notifications,
-	 * no need to poll the killswitch state anymore */
-	cancel_delayed_work(&priv->_3945.rfkill_poll);
-
-	priv->is_open = 1;
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	return 0;
-
-out_release_irq:
-	priv->is_open = 0;
-	IWL_DEBUG_MAC80211(priv, "leave - failed\n");
-	return ret;
-}
-
-static void iwl3945_mac_stop(struct ieee80211_hw *hw)
-{
-	struct iwl_priv *priv = hw->priv;
-
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	if (!priv->is_open) {
-		IWL_DEBUG_MAC80211(priv, "leave - skip\n");
-		return;
-	}
-
-	priv->is_open = 0;
-
-	iwl3945_down(priv);
-
-	flush_workqueue(priv->workqueue);
-
-	/* start polling the killswitch state again */
-	queue_delayed_work(priv->workqueue, &priv->_3945.rfkill_poll,
-			   round_jiffies_relative(2 * HZ));
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-}
-
-static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
-	struct iwl_priv *priv = hw->priv;
-
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
-		     ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
-
-	if (iwl3945_tx_skb(priv, skb))
-		dev_kfree_skb_any(skb);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	return NETDEV_TX_OK;
-}
-
-void iwl3945_config_ap(struct iwl_priv *priv)
-{
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-	struct ieee80211_vif *vif = ctx->vif;
-	int rc = 0;
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	/* The following should be done only at AP bring up */
-	if (!(iwl_is_associated(priv, IWL_RXON_CTX_BSS))) {
-
-		/* RXON - unassoc (to set timing command) */
-		ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwl3945_commit_rxon(priv, ctx);
-
-		/* RXON Timing */
-		rc = iwl_send_rxon_timing(priv, ctx);
-		if (rc)
-			IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
-					"Attempting to continue.\n");
-
-		ctx->staging.assoc_id = 0;
-
-		if (vif->bss_conf.use_short_preamble)
-			ctx->staging.flags |=
-				RXON_FLG_SHORT_PREAMBLE_MSK;
-		else
-			ctx->staging.flags &=
-				~RXON_FLG_SHORT_PREAMBLE_MSK;
-
-		if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
-			if (vif->bss_conf.use_short_slot)
-				ctx->staging.flags |=
-					RXON_FLG_SHORT_SLOT_MSK;
-			else
-				ctx->staging.flags &=
-					~RXON_FLG_SHORT_SLOT_MSK;
-		}
-		/* restore RXON assoc */
-		ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
-		iwl3945_commit_rxon(priv, ctx);
-	}
-	iwl3945_send_beacon_cmd(priv);
-
-	/* FIXME - we need to add code here to detect a totally new
-	 * configuration, reset the AP, unassoc, rxon timing, assoc,
-	 * clear sta table, add BCAST sta... */
-}
-
-static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
-			       struct ieee80211_vif *vif,
-			       struct ieee80211_sta *sta,
-			       struct ieee80211_key_conf *key)
-{
-	struct iwl_priv *priv = hw->priv;
-	int ret = 0;
-	u8 sta_id = IWL_INVALID_STATION;
-	u8 static_key;
-
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	if (iwl3945_mod_params.sw_crypto) {
-		IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n");
-		return -EOPNOTSUPP;
-	}
-
-	/*
-	 * To support IBSS RSN, don't program group keys in IBSS, the
-	 * hardware will then not attempt to decrypt the frames.
-	 */
-	if (vif->type == NL80211_IFTYPE_ADHOC &&
-	    !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE))
-		return -EOPNOTSUPP;
-
-	static_key = !iwl_is_associated(priv, IWL_RXON_CTX_BSS);
-
-	if (!static_key) {
-		sta_id = iwl_sta_id_or_broadcast(
-				priv, &priv->contexts[IWL_RXON_CTX_BSS], sta);
-		if (sta_id == IWL_INVALID_STATION)
-			return -EINVAL;
-	}
-
-	mutex_lock(&priv->mutex);
-	iwl_scan_cancel_timeout(priv, 100);
-
-	switch (cmd) {
-	case SET_KEY:
-		if (static_key)
-			ret = iwl3945_set_static_key(priv, key);
-		else
-			ret = iwl3945_set_dynamic_key(priv, key, sta_id);
-		IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n");
-		break;
-	case DISABLE_KEY:
-		if (static_key)
-			ret = iwl3945_remove_static_key(priv);
-		else
-			ret = iwl3945_clear_sta_key_info(priv, sta_id);
-		IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n");
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	mutex_unlock(&priv->mutex);
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-
-	return ret;
-}
-
-static int iwl3945_mac_sta_add(struct ieee80211_hw *hw,
-			       struct ieee80211_vif *vif,
-			       struct ieee80211_sta *sta)
-{
-	struct iwl_priv *priv = hw->priv;
-	struct iwl3945_sta_priv *sta_priv = (void *)sta->drv_priv;
-	int ret;
-	bool is_ap = vif->type == NL80211_IFTYPE_STATION;
-	u8 sta_id;
-
-	IWL_DEBUG_INFO(priv, "received request to add station %pM\n",
-			sta->addr);
-	mutex_lock(&priv->mutex);
-	IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n",
-			sta->addr);
-	sta_priv->common.sta_id = IWL_INVALID_STATION;
-
-
-	ret = iwl_add_station_common(priv, &priv->contexts[IWL_RXON_CTX_BSS],
-				     sta->addr, is_ap, sta, &sta_id);
-	if (ret) {
-		IWL_ERR(priv, "Unable to add station %pM (%d)\n",
-			sta->addr, ret);
-		/* Should we return success if return code is EEXIST ? */
-		mutex_unlock(&priv->mutex);
-		return ret;
-	}
-
-	sta_priv->common.sta_id = sta_id;
-
-	/* Initialize rate scaling */
-	IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n",
-		       sta->addr);
-	iwl3945_rs_rate_init(priv, sta, sta_id);
-	mutex_unlock(&priv->mutex);
-
-	return 0;
-}
-
-static void iwl3945_configure_filter(struct ieee80211_hw *hw,
-				     unsigned int changed_flags,
-				     unsigned int *total_flags,
-				     u64 multicast)
-{
-	struct iwl_priv *priv = hw->priv;
-	__le32 filter_or = 0, filter_nand = 0;
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
-#define CHK(test, flag)	do { \
-	if (*total_flags & (test))		\
-		filter_or |= (flag);		\
-	else					\
-		filter_nand |= (flag);		\
-	} while (0)
-
-	IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n",
-			changed_flags, *total_flags);
-
-	CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK);
-	CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK);
-	CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
-
-#undef CHK
-
-	mutex_lock(&priv->mutex);
-
-	ctx->staging.filter_flags &= ~filter_nand;
-	ctx->staging.filter_flags |= filter_or;
-
-	/*
-	 * Not committing directly because hardware can perform a scan,
-	 * but even if hw is ready, committing here breaks for some reason,
-	 * we'll eventually commit the filter flags change anyway.
-	 */
-
-	mutex_unlock(&priv->mutex);
-
-	/*
-	 * Receiving all multicast frames is always enabled by the
-	 * default flags setup in iwl_connection_init_rx_config()
-	 * since we currently do not support programming multicast
-	 * filters into the device.
-	 */
-	*total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
-			FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
-}
-
-
-/*****************************************************************************
- *
- * sysfs attributes
- *
- *****************************************************************************/
-
-#ifdef CONFIG_IWLWIFI_DEBUG
-
-/*
- * The following adds a new attribute to the sysfs representation
- * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
- * used for controlling the debug level.
- *
- * See the level definitions in iwl for details.
- *
- * The debug_level being managed using sysfs below is a per device debug
- * level that is used instead of the global debug level if it (the per
- * device debug level) is set.
- */
-static ssize_t show_debug_level(struct device *d,
-				struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv));
-}
-static ssize_t store_debug_level(struct device *d,
-				struct device_attribute *attr,
-				 const char *buf, size_t count)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	unsigned long val;
-	int ret;
-
-	ret = strict_strtoul(buf, 0, &val);
-	if (ret)
-		IWL_INFO(priv, "%s is not in hex or decimal form.\n", buf);
-	else {
-		priv->debug_level = val;
-		if (iwl_alloc_traffic_mem(priv))
-			IWL_ERR(priv,
-				"Not enough memory to generate traffic log\n");
-	}
-	return strnlen(buf, count);
-}
-
-static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
-			show_debug_level, store_debug_level);
-
-#endif /* CONFIG_IWLWIFI_DEBUG */
-
-static ssize_t show_temperature(struct device *d,
-				struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-
-	if (!iwl_is_alive(priv))
-		return -EAGAIN;
-
-	return sprintf(buf, "%d\n", iwl3945_hw_get_temperature(priv));
-}
-
-static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
-
-static ssize_t show_tx_power(struct device *d,
-			     struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
-}
-
-static ssize_t store_tx_power(struct device *d,
-			      struct device_attribute *attr,
-			      const char *buf, size_t count)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	char *p = (char *)buf;
-	u32 val;
-
-	val = simple_strtoul(p, &p, 10);
-	if (p == buf)
-		IWL_INFO(priv, ": %s is not in decimal form.\n", buf);
-	else
-		iwl3945_hw_reg_set_txpower(priv, val);
-
-	return count;
-}
-
-static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
-
-static ssize_t show_flags(struct device *d,
-			  struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
-	return sprintf(buf, "0x%04X\n", ctx->active.flags);
-}
-
-static ssize_t store_flags(struct device *d,
-			   struct device_attribute *attr,
-			   const char *buf, size_t count)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	u32 flags = simple_strtoul(buf, NULL, 0);
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
-	mutex_lock(&priv->mutex);
-	if (le32_to_cpu(ctx->staging.flags) != flags) {
-		/* Cancel any currently running scans... */
-		if (iwl_scan_cancel_timeout(priv, 100))
-			IWL_WARN(priv, "Could not cancel scan.\n");
-		else {
-			IWL_DEBUG_INFO(priv, "Committing rxon.flags = 0x%04X\n",
-				       flags);
-			ctx->staging.flags = cpu_to_le32(flags);
-			iwl3945_commit_rxon(priv, ctx);
-		}
-	}
-	mutex_unlock(&priv->mutex);
-
-	return count;
-}
-
-static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, show_flags, store_flags);
-
-static ssize_t show_filter_flags(struct device *d,
-				 struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-
-	return sprintf(buf, "0x%04X\n",
-		le32_to_cpu(ctx->active.filter_flags));
-}
-
-static ssize_t store_filter_flags(struct device *d,
-				  struct device_attribute *attr,
-				  const char *buf, size_t count)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-	u32 filter_flags = simple_strtoul(buf, NULL, 0);
-
-	mutex_lock(&priv->mutex);
-	if (le32_to_cpu(ctx->staging.filter_flags) != filter_flags) {
-		/* Cancel any currently running scans... */
-		if (iwl_scan_cancel_timeout(priv, 100))
-			IWL_WARN(priv, "Could not cancel scan.\n");
-		else {
-			IWL_DEBUG_INFO(priv, "Committing rxon.filter_flags = "
-				       "0x%04X\n", filter_flags);
-			ctx->staging.filter_flags =
-				cpu_to_le32(filter_flags);
-			iwl3945_commit_rxon(priv, ctx);
-		}
-	}
-	mutex_unlock(&priv->mutex);
-
-	return count;
-}
-
-static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags,
-		   store_filter_flags);
-
-static ssize_t show_measurement(struct device *d,
-				struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	struct iwl_spectrum_notification measure_report;
-	u32 size = sizeof(measure_report), len = 0, ofs = 0;
-	u8 *data = (u8 *)&measure_report;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	if (!(priv->measurement_status & MEASUREMENT_READY)) {
-		spin_unlock_irqrestore(&priv->lock, flags);
-		return 0;
-	}
-	memcpy(&measure_report, &priv->measure_report, size);
-	priv->measurement_status = 0;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	while (size && (PAGE_SIZE - len)) {
-		hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
-				   PAGE_SIZE - len, 1);
-		len = strlen(buf);
-		if (PAGE_SIZE - len)
-			buf[len++] = '\n';
-
-		ofs += 16;
-		size -= min(size, 16U);
-	}
-
-	return len;
-}
-
-static ssize_t store_measurement(struct device *d,
-				 struct device_attribute *attr,
-				 const char *buf, size_t count)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-	struct ieee80211_measurement_params params = {
-		.channel = le16_to_cpu(ctx->active.channel),
-		.start_time = cpu_to_le64(priv->_3945.last_tsf),
-		.duration = cpu_to_le16(1),
-	};
-	u8 type = IWL_MEASURE_BASIC;
-	u8 buffer[32];
-	u8 channel;
-
-	if (count) {
-		char *p = buffer;
-		strncpy(buffer, buf, min(sizeof(buffer), count));
-		channel = simple_strtoul(p, NULL, 0);
-		if (channel)
-			params.channel = channel;
-
-		p = buffer;
-		while (*p && *p != ' ')
-			p++;
-		if (*p)
-			type = simple_strtoul(p + 1, NULL, 0);
-	}
-
-	IWL_DEBUG_INFO(priv, "Invoking measurement of type %d on "
-		       "channel %d (for '%s')\n", type, params.channel, buf);
-	iwl3945_get_measurement(priv, &params, type);
-
-	return count;
-}
-
-static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR,
-		   show_measurement, store_measurement);
-
-static ssize_t store_retry_rate(struct device *d,
-				struct device_attribute *attr,
-				const char *buf, size_t count)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-
-	priv->retry_rate = simple_strtoul(buf, NULL, 0);
-	if (priv->retry_rate <= 0)
-		priv->retry_rate = 1;
-
-	return count;
-}
-
-static ssize_t show_retry_rate(struct device *d,
-			       struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	return sprintf(buf, "%d", priv->retry_rate);
-}
-
-static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, show_retry_rate,
-		   store_retry_rate);
-
-
-static ssize_t show_channels(struct device *d,
-			     struct device_attribute *attr, char *buf)
-{
-	/* all this shit doesn't belong into sysfs anyway */
-	return 0;
-}
-
-static DEVICE_ATTR(channels, S_IRUSR, show_channels, NULL);
-
-static ssize_t show_antenna(struct device *d,
-			    struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-
-	if (!iwl_is_alive(priv))
-		return -EAGAIN;
-
-	return sprintf(buf, "%d\n", iwl3945_mod_params.antenna);
-}
-
-static ssize_t store_antenna(struct device *d,
-			     struct device_attribute *attr,
-			     const char *buf, size_t count)
-{
-	struct iwl_priv *priv __maybe_unused = dev_get_drvdata(d);
-	int ant;
-
-	if (count == 0)
-		return 0;
-
-	if (sscanf(buf, "%1i", &ant) != 1) {
-		IWL_DEBUG_INFO(priv, "not in hex or decimal form.\n");
-		return count;
-	}
-
-	if ((ant >= 0) && (ant <= 2)) {
-		IWL_DEBUG_INFO(priv, "Setting antenna select to %d.\n", ant);
-		iwl3945_mod_params.antenna = (enum iwl3945_antenna)ant;
-	} else
-		IWL_DEBUG_INFO(priv, "Bad antenna select value %d.\n", ant);
-
-
-	return count;
-}
-
-static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, show_antenna, store_antenna);
-
-static ssize_t show_status(struct device *d,
-			   struct device_attribute *attr, char *buf)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	if (!iwl_is_alive(priv))
-		return -EAGAIN;
-	return sprintf(buf, "0x%08x\n", (int)priv->status);
-}
-
-static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
-
-static ssize_t dump_error_log(struct device *d,
-			      struct device_attribute *attr,
-			      const char *buf, size_t count)
-{
-	struct iwl_priv *priv = dev_get_drvdata(d);
-	char *p = (char *)buf;
-
-	if (p[0] == '1')
-		iwl3945_dump_nic_error_log(priv);
-
-	return strnlen(buf, count);
-}
-
-static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, dump_error_log);
-
-/*****************************************************************************
- *
- * driver setup and tear down
- *
- *****************************************************************************/
-
-static void iwl3945_setup_deferred_work(struct iwl_priv *priv)
-{
-	priv->workqueue = create_singlethread_workqueue(DRV_NAME);
-
-	init_waitqueue_head(&priv->wait_command_queue);
-
-	INIT_WORK(&priv->restart, iwl3945_bg_restart);
-	INIT_WORK(&priv->rx_replenish, iwl3945_bg_rx_replenish);
-	INIT_WORK(&priv->beacon_update, iwl3945_bg_beacon_update);
-	INIT_DELAYED_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start);
-	INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start);
-	INIT_DELAYED_WORK(&priv->_3945.rfkill_poll, iwl3945_rfkill_poll);
-
-	iwl_setup_scan_deferred_work(priv);
-
-	iwl3945_hw_setup_deferred_work(priv);
-
-	init_timer(&priv->watchdog);
-	priv->watchdog.data = (unsigned long)priv;
-	priv->watchdog.function = iwl_bg_watchdog;
-
-	tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
-		     iwl3945_irq_tasklet, (unsigned long)priv);
-}
-
-static void iwl3945_cancel_deferred_work(struct iwl_priv *priv)
-{
-	iwl3945_hw_cancel_deferred_work(priv);
-
-	cancel_delayed_work_sync(&priv->init_alive_start);
-	cancel_delayed_work(&priv->alive_start);
-	cancel_work_sync(&priv->beacon_update);
-
-	iwl_cancel_scan_deferred_work(priv);
-}
-
-static struct attribute *iwl3945_sysfs_entries[] = {
-	&dev_attr_antenna.attr,
-	&dev_attr_channels.attr,
-	&dev_attr_dump_errors.attr,
-	&dev_attr_flags.attr,
-	&dev_attr_filter_flags.attr,
-	&dev_attr_measurement.attr,
-	&dev_attr_retry_rate.attr,
-	&dev_attr_status.attr,
-	&dev_attr_temperature.attr,
-	&dev_attr_tx_power.attr,
-#ifdef CONFIG_IWLWIFI_DEBUG
-	&dev_attr_debug_level.attr,
-#endif
-	NULL
-};
-
-static struct attribute_group iwl3945_attribute_group = {
-	.name = NULL,		/* put in device directory */
-	.attrs = iwl3945_sysfs_entries,
-};
-
-struct ieee80211_ops iwl3945_hw_ops = {
-	.tx = iwl3945_mac_tx,
-	.start = iwl3945_mac_start,
-	.stop = iwl3945_mac_stop,
-	.add_interface = iwl_mac_add_interface,
-	.remove_interface = iwl_mac_remove_interface,
-	.change_interface = iwl_mac_change_interface,
-	.config = iwl_legacy_mac_config,
-	.configure_filter = iwl3945_configure_filter,
-	.set_key = iwl3945_mac_set_key,
-	.conf_tx = iwl_mac_conf_tx,
-	.reset_tsf = iwl_legacy_mac_reset_tsf,
-	.bss_info_changed = iwl_legacy_mac_bss_info_changed,
-	.hw_scan = iwl_mac_hw_scan,
-	.sta_add = iwl3945_mac_sta_add,
-	.sta_remove = iwl_mac_sta_remove,
-	.tx_last_beacon = iwl_mac_tx_last_beacon,
-};
-
-static int iwl3945_init_drv(struct iwl_priv *priv)
-{
-	int ret;
-	struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
-
-	priv->retry_rate = 1;
-	priv->beacon_skb = NULL;
-
-	spin_lock_init(&priv->sta_lock);
-	spin_lock_init(&priv->hcmd_lock);
-
-	INIT_LIST_HEAD(&priv->free_frames);
-
-	mutex_init(&priv->mutex);
-	mutex_init(&priv->sync_cmd_mutex);
-
-	priv->ieee_channels = NULL;
-	priv->ieee_rates = NULL;
-	priv->band = IEEE80211_BAND_2GHZ;
-
-	priv->iw_mode = NL80211_IFTYPE_STATION;
-	priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
-
-	/* initialize force reset */
-	priv->force_reset[IWL_RF_RESET].reset_duration =
-		IWL_DELAY_NEXT_FORCE_RF_RESET;
-	priv->force_reset[IWL_FW_RESET].reset_duration =
-		IWL_DELAY_NEXT_FORCE_FW_RELOAD;
-
-
-	priv->tx_power_user_lmt = IWL_DEFAULT_TX_POWER;
-	priv->tx_power_next = IWL_DEFAULT_TX_POWER;
-
-	if (eeprom->version < EEPROM_3945_EEPROM_VERSION) {
-		IWL_WARN(priv, "Unsupported EEPROM version: 0x%04X\n",
-			 eeprom->version);
-		ret = -EINVAL;
-		goto err;
-	}
-	ret = iwl_init_channel_map(priv);
-	if (ret) {
-		IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
-		goto err;
-	}
-
-	/* Set up txpower settings in driver for all channels */
-	if (iwl3945_txpower_set_from_eeprom(priv)) {
-		ret = -EIO;
-		goto err_free_channel_map;
-	}
-
-	ret = iwlcore_init_geos(priv);
-	if (ret) {
-		IWL_ERR(priv, "initializing geos failed: %d\n", ret);
-		goto err_free_channel_map;
-	}
-	iwl3945_init_hw_rates(priv, priv->ieee_rates);
-
-	return 0;
-
-err_free_channel_map:
-	iwl_free_channel_map(priv);
-err:
-	return ret;
-}
-
-#define IWL3945_MAX_PROBE_REQUEST	200
-
-static int iwl3945_setup_mac(struct iwl_priv *priv)
-{
-	int ret;
-	struct ieee80211_hw *hw = priv->hw;
-
-	hw->rate_control_algorithm = "iwl-3945-rs";
-	hw->sta_data_size = sizeof(struct iwl3945_sta_priv);
-	hw->vif_data_size = sizeof(struct iwl_vif_priv);
-
-	/* Tell mac80211 our characteristics */
-	hw->flags = IEEE80211_HW_SIGNAL_DBM |
-		    IEEE80211_HW_SPECTRUM_MGMT;
-
-	if (!priv->cfg->base_params->broken_powersave)
-		hw->flags |= IEEE80211_HW_SUPPORTS_PS |
-			     IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
-
-	hw->wiphy->interface_modes =
-		priv->contexts[IWL_RXON_CTX_BSS].interface_modes;
-
-	hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
-			    WIPHY_FLAG_DISABLE_BEACON_HINTS |
-			    WIPHY_FLAG_IBSS_RSN;
-
-	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
-	/* we create the 802.11 header and a zero-length SSID element */
-	hw->wiphy->max_scan_ie_len = IWL3945_MAX_PROBE_REQUEST - 24 - 2;
-
-	/* Default value; 4 EDCA QOS priorities */
-	hw->queues = 4;
-
-	if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
-		priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
-			&priv->bands[IEEE80211_BAND_2GHZ];
-
-	if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
-		priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
-			&priv->bands[IEEE80211_BAND_5GHZ];
-
-	iwl_leds_init(priv);
-
-	ret = ieee80211_register_hw(priv->hw);
-	if (ret) {
-		IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
-		return ret;
-	}
-	priv->mac80211_registered = 1;
-
-	return 0;
-}
-
-static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
-	int err = 0, i;
-	struct iwl_priv *priv;
-	struct ieee80211_hw *hw;
-	struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data);
-	struct iwl3945_eeprom *eeprom;
-	unsigned long flags;
-
-	/***********************
-	 * 1. Allocating HW data
-	 * ********************/
-
-	/* mac80211 allocates memory for this device instance, including
-	 *   space for this driver's private structure */
-	hw = iwl_alloc_all(cfg);
-	if (hw == NULL) {
-		pr_err("Can not allocate network device\n");
-		err = -ENOMEM;
-		goto out;
-	}
-	priv = hw->priv;
-	SET_IEEE80211_DEV(hw, &pdev->dev);
-
-	priv->cmd_queue = IWL39_CMD_QUEUE_NUM;
-
-	/* 3945 has only one valid context */
-	priv->valid_contexts = BIT(IWL_RXON_CTX_BSS);
-
-	for (i = 0; i < NUM_IWL_RXON_CTX; i++)
-		priv->contexts[i].ctxid = i;
-
-	priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON;
-	priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING;
-	priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC;
-	priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM;
-	priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID;
-	priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY;
-	priv->contexts[IWL_RXON_CTX_BSS].interface_modes =
-		BIT(NL80211_IFTYPE_STATION) |
-		BIT(NL80211_IFTYPE_ADHOC);
-	priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS;
-	priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS;
-	priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS;
-
-	/*
-	 * Disabling hardware scan means that mac80211 will perform scans
-	 * "the hard way", rather than using device's scan.
-	 */
-	if (iwl3945_mod_params.disable_hw_scan) {
-		dev_printk(KERN_DEBUG, &(pdev->dev),
-			"sw scan support is deprecated\n");
-		iwl3945_hw_ops.hw_scan = NULL;
-	}
-
-
-	IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
-	priv->cfg = cfg;
-	priv->pci_dev = pdev;
-	priv->inta_mask = CSR_INI_SET_MASK;
-
-	if (iwl_alloc_traffic_mem(priv))
-		IWL_ERR(priv, "Not enough memory to generate traffic log\n");
-
-	/***************************
-	 * 2. Initializing PCI bus
-	 * *************************/
-	pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
-				PCIE_LINK_STATE_CLKPM);
-
-	if (pci_enable_device(pdev)) {
-		err = -ENODEV;
-		goto out_ieee80211_free_hw;
-	}
-
-	pci_set_master(pdev);
-
-	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
-	if (!err)
-		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
-	if (err) {
-		IWL_WARN(priv, "No suitable DMA available.\n");
-		goto out_pci_disable_device;
-	}
-
-	pci_set_drvdata(pdev, priv);
-	err = pci_request_regions(pdev, DRV_NAME);
-	if (err)
-		goto out_pci_disable_device;
-
-	/***********************
-	 * 3. Read REV Register
-	 * ********************/
-	priv->hw_base = pci_iomap(pdev, 0, 0);
-	if (!priv->hw_base) {
-		err = -ENODEV;
-		goto out_pci_release_regions;
-	}
-
-	IWL_DEBUG_INFO(priv, "pci_resource_len = 0x%08llx\n",
-			(unsigned long long) pci_resource_len(pdev, 0));
-	IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base);
-
-	/* We disable the RETRY_TIMEOUT register (0x41) to keep
-	 * PCI Tx retries from interfering with C3 CPU state */
-	pci_write_config_byte(pdev, 0x41, 0x00);
-
-	/* these spin locks will be used in apm_ops.init and EEPROM access
-	 * we should init now
-	 */
-	spin_lock_init(&priv->reg_lock);
-	spin_lock_init(&priv->lock);
-
-	/*
-	 * stop and reset the on-board processor just in case it is in a
-	 * strange state ... like being left stranded by a primary kernel
-	 * and this is now the kdump kernel trying to start up
-	 */
-	iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
-
-	/***********************
-	 * 4. Read EEPROM
-	 * ********************/
-
-	/* Read the EEPROM */
-	err = iwl_eeprom_init(priv);
-	if (err) {
-		IWL_ERR(priv, "Unable to init EEPROM\n");
-		goto out_iounmap;
-	}
-	/* MAC Address location in EEPROM same for 3945/4965 */
-	eeprom = (struct iwl3945_eeprom *)priv->eeprom;
-	IWL_DEBUG_INFO(priv, "MAC address: %pM\n", eeprom->mac_address);
-	SET_IEEE80211_PERM_ADDR(priv->hw, eeprom->mac_address);
-
-	/***********************
-	 * 5. Setup HW Constants
-	 * ********************/
-	/* Device-specific setup */
-	if (iwl3945_hw_set_hw_params(priv)) {
-		IWL_ERR(priv, "failed to set hw settings\n");
-		goto out_eeprom_free;
-	}
-
-	/***********************
-	 * 6. Setup priv
-	 * ********************/
-
-	err = iwl3945_init_drv(priv);
-	if (err) {
-		IWL_ERR(priv, "initializing driver failed\n");
-		goto out_unset_hw_params;
-	}
-
-	IWL_INFO(priv, "Detected Intel Wireless WiFi Link %s\n",
-		priv->cfg->name);
-
-	/***********************
-	 * 7. Setup Services
-	 * ********************/
-
-	spin_lock_irqsave(&priv->lock, flags);
-	iwl_disable_interrupts(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	pci_enable_msi(priv->pci_dev);
-
-	err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr_ops.isr,
-			  IRQF_SHARED, DRV_NAME, priv);
-	if (err) {
-		IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
-		goto out_disable_msi;
-	}
-
-	err = sysfs_create_group(&pdev->dev.kobj, &iwl3945_attribute_group);
-	if (err) {
-		IWL_ERR(priv, "failed to create sysfs device attributes\n");
-		goto out_release_irq;
-	}
-
-	iwl_set_rxon_channel(priv,
-			     &priv->bands[IEEE80211_BAND_2GHZ].channels[5],
-			     &priv->contexts[IWL_RXON_CTX_BSS]);
-	iwl3945_setup_deferred_work(priv);
-	iwl3945_setup_rx_handlers(priv);
-	iwl_power_initialize(priv);
-
-	/*********************************
-	 * 8. Setup and Register mac80211
-	 * *******************************/
-
-	iwl_enable_interrupts(priv);
-
-	err = iwl3945_setup_mac(priv);
-	if (err)
-		goto  out_remove_sysfs;
-
-	err = iwl_dbgfs_register(priv, DRV_NAME);
-	if (err)
-		IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
-
-	/* Start monitoring the killswitch */
-	queue_delayed_work(priv->workqueue, &priv->_3945.rfkill_poll,
-			   2 * HZ);
-
-	return 0;
-
- out_remove_sysfs:
-	destroy_workqueue(priv->workqueue);
-	priv->workqueue = NULL;
-	sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
- out_release_irq:
-	free_irq(priv->pci_dev->irq, priv);
- out_disable_msi:
-	pci_disable_msi(priv->pci_dev);
-	iwlcore_free_geos(priv);
-	iwl_free_channel_map(priv);
- out_unset_hw_params:
-	iwl3945_unset_hw_params(priv);
- out_eeprom_free:
-	iwl_eeprom_free(priv);
- out_iounmap:
-	pci_iounmap(pdev, priv->hw_base);
- out_pci_release_regions:
-	pci_release_regions(pdev);
- out_pci_disable_device:
-	pci_set_drvdata(pdev, NULL);
-	pci_disable_device(pdev);
- out_ieee80211_free_hw:
-	iwl_free_traffic_mem(priv);
-	ieee80211_free_hw(priv->hw);
- out:
-	return err;
-}
-
-static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
-{
-	struct iwl_priv *priv = pci_get_drvdata(pdev);
-	unsigned long flags;
-
-	if (!priv)
-		return;
-
-	IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
-
-	iwl_dbgfs_unregister(priv);
-
-	set_bit(STATUS_EXIT_PENDING, &priv->status);
-
-	iwl_leds_exit(priv);
-
-	if (priv->mac80211_registered) {
-		ieee80211_unregister_hw(priv->hw);
-		priv->mac80211_registered = 0;
-	} else {
-		iwl3945_down(priv);
-	}
-
-	/*
-	 * Make sure device is reset to low power before unloading driver.
-	 * This may be redundant with iwl_down(), but there are paths to
-	 * run iwl_down() without calling apm_ops.stop(), and there are
-	 * paths to avoid running iwl_down() at all before leaving driver.
-	 * This (inexpensive) call *makes sure* device is reset.
-	 */
-	iwl_apm_stop(priv);
-
-	/* make sure we flush any pending irq or
-	 * tasklet for the driver
-	 */
-	spin_lock_irqsave(&priv->lock, flags);
-	iwl_disable_interrupts(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	iwl_synchronize_irq(priv);
-
-	sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
-
-	cancel_delayed_work_sync(&priv->_3945.rfkill_poll);
-
-	iwl3945_dealloc_ucode_pci(priv);
-
-	if (priv->rxq.bd)
-		iwl3945_rx_queue_free(priv, &priv->rxq);
-	iwl3945_hw_txq_ctx_free(priv);
-
-	iwl3945_unset_hw_params(priv);
-
-	/*netif_stop_queue(dev); */
-	flush_workqueue(priv->workqueue);
-
-	/* ieee80211_unregister_hw calls iwl3945_mac_stop, which flushes
-	 * priv->workqueue... so we can't take down the workqueue
-	 * until now... */
-	destroy_workqueue(priv->workqueue);
-	priv->workqueue = NULL;
-	iwl_free_traffic_mem(priv);
-
-	free_irq(pdev->irq, priv);
-	pci_disable_msi(pdev);
-
-	pci_iounmap(pdev, priv->hw_base);
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-	pci_set_drvdata(pdev, NULL);
-
-	iwl_free_channel_map(priv);
-	iwlcore_free_geos(priv);
-	kfree(priv->scan_cmd);
-	if (priv->beacon_skb)
-		dev_kfree_skb(priv->beacon_skb);
-
-	ieee80211_free_hw(priv->hw);
-}
-
-
-/*****************************************************************************
- *
- * driver and module entry point
- *
- *****************************************************************************/
-
-static struct pci_driver iwl3945_driver = {
-	.name = DRV_NAME,
-	.id_table = iwl3945_hw_card_ids,
-	.probe = iwl3945_pci_probe,
-	.remove = __devexit_p(iwl3945_pci_remove),
-	.driver.pm = IWL_PM_OPS,
-};
-
-static int __init iwl3945_init(void)
-{
-
-	int ret;
-	pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
-	pr_info(DRV_COPYRIGHT "\n");
-
-	ret = iwl3945_rate_control_register();
-	if (ret) {
-		pr_err("Unable to register rate control algorithm: %d\n", ret);
-		return ret;
-	}
-
-	ret = pci_register_driver(&iwl3945_driver);
-	if (ret) {
-		pr_err("Unable to initialize PCI module\n");
-		goto error_register;
-	}
-
-	return ret;
-
-error_register:
-	iwl3945_rate_control_unregister();
-	return ret;
-}
-
-static void __exit iwl3945_exit(void)
-{
-	pci_unregister_driver(&iwl3945_driver);
-	iwl3945_rate_control_unregister();
-}
-
-MODULE_FIRMWARE(IWL3945_MODULE_FIRMWARE(IWL3945_UCODE_API_MAX));
-
-module_param_named(antenna, iwl3945_mod_params.antenna, int, S_IRUGO);
-MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
-module_param_named(swcrypto, iwl3945_mod_params.sw_crypto, int, S_IRUGO);
-MODULE_PARM_DESC(swcrypto,
-		 "using software crypto (default 1 [software])\n");
-#ifdef CONFIG_IWLWIFI_DEBUG
-module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "debug output mask");
-#endif
-module_param_named(disable_hw_scan, iwl3945_mod_params.disable_hw_scan,
-		   int, S_IRUGO);
-MODULE_PARM_DESC(disable_hw_scan,
-		 "disable hardware scanning (default 0) (deprecated)");
-module_param_named(fw_restart3945, iwl3945_mod_params.restart_fw, int, S_IRUGO);
-MODULE_PARM_DESC(fw_restart3945, "restart firmware in case of error");
-
-module_exit(iwl3945_exit);
-module_init(iwl3945_init);