diff options
| author | Javier Cardona <javier@cozybit.com> | 2008-05-17 00:55:10 -0700 |
|---|---|---|
| committer | John W. Linville <linville@tuxdriver.com> | 2008-05-21 21:47:39 -0400 |
| commit | edaea5ce05ca804cc55438c586ca2f947d49f56f (patch) | |
| tree | be82d922cb908221d247e21d04ddf5517e7a4953 /drivers/net/wireless/libertas/main.c | |
| parent | 75bf45a7b4ab81cfa5c5eab68b57bbfee8b8ede2 (diff) | |
libertas: Extend MESH_CONFIG command to access non-volatile configuration
This patch is based on a patch from Shailendra Govardhan and Brian Cavagnolo.
It extends the MESH_CONFIG command to configure non-volatile parameters on
libertas devices that support them (e.g. OLPC Active Antenna).
This patch only implements the driver/firmware interface.
See http://dev.laptop.org/ticket/6823 for minimal testing results and known
issues.
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/libertas/main.c')
| -rw-r--r-- | drivers/net/wireless/libertas/main.c | 13 |
1 files changed, 8 insertions, 5 deletions
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index a87febad8c2..01299c8ed27 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -344,14 +344,15 @@ static ssize_t lbs_mesh_set(struct device *dev, { struct lbs_private *priv = to_net_dev(dev)->priv; int enable; - int ret; + int ret, action = CMD_ACT_MESH_CONFIG_STOP; sscanf(buf, "%x", &enable); enable = !!enable; if (enable == !!priv->mesh_dev) return count; - - ret = lbs_mesh_config(priv, enable, priv->curbssparams.channel); + if (enable) + action = CMD_ACT_MESH_CONFIG_START; + ret = lbs_mesh_config(priv, action, priv->curbssparams.channel); if (ret) return ret; @@ -1257,9 +1258,11 @@ int lbs_start_card(struct lbs_private *priv) useful */ priv->mesh_tlv = 0x100 + 291; - if (lbs_mesh_config(priv, 1, priv->curbssparams.channel)) { + if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START, + priv->curbssparams.channel)) { priv->mesh_tlv = 0x100 + 37; - if (lbs_mesh_config(priv, 1, priv->curbssparams.channel)) + if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START, + priv->curbssparams.channel)) priv->mesh_tlv = 0; } if (priv->mesh_tlv) { |