diff options
| author | Amitkumar Karwar <akarwar@marvell.com> | 2011-04-27 19:13:12 -0700 |
|---|---|---|
| committer | John W. Linville <linville@tuxdriver.com> | 2011-04-28 14:53:23 -0400 |
| commit | a46b7b5c13b9ecfe2b4e045e06aaec644dcf55d8 (patch) | |
| tree | d74c4482678c0221d1b006cee48a56e8d962a557 /drivers/net/wireless/mwifiex/cfg80211.c | |
| parent | adc89595732b92f78940fc0ccdb52afaec582a48 (diff) | |
mwifiex: HT capability information handling
1) Initialise HT capabilities in cfg80211 properly.
2) Cfg80211 stack may modify "sband->ht_cap" to disable
40Mhz operation in 2.4GHz band (after recent patch
"cfg80211: module_param to disable HT40 in 2.4GHz band")
Therefore read "sband->ht_cap" instead of an adapter variable
"hw_dot_11n_dev_cap" to get HT capabilities.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/mwifiex/cfg80211.c')
| -rw-r--r-- | drivers/net/wireless/mwifiex/cfg80211.c | 42 |
1 files changed, 35 insertions, 7 deletions
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index 58557556212..98009e2194c 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1150,9 +1150,9 @@ mwifiex_cfg80211_scan(struct wiphy *wiphy, struct net_device *dev, * * The following default values are set - * - HT Supported = True - * - Maximum AMPDU length factor = 0x3 - * - Minimum AMPDU spacing = 0x6 - * - HT Capabilities map = IEEE80211_HT_CAP_SUP_WIDTH_20_40 (0x0002) + * - Maximum AMPDU length factor = IEEE80211_HT_MAX_AMPDU_64K + * - Minimum AMPDU spacing = IEEE80211_HT_MPDU_DENSITY_NONE + * - HT Capabilities supported by firmware * - MCS information, Rx mask = 0xff * - MCD information, Tx parameters = IEEE80211_HT_MCS_TX_DEFINED (0x01) */ @@ -1166,13 +1166,41 @@ mwifiex_setup_ht_caps(struct ieee80211_sta_ht_cap *ht_info, struct mwifiex_adapter *adapter = priv->adapter; ht_info->ht_supported = true; - ht_info->ampdu_factor = 0x3; - ht_info->ampdu_density = 0x6; + ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K; + ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_NONE; memset(&ht_info->mcs, 0, sizeof(ht_info->mcs)); - ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40; - rx_mcs_supp = GET_RXMCSSUPP(priv->adapter->hw_dev_mcs_support); + /* Fill HT capability information */ + if (ISSUPP_CHANWIDTH40(adapter->hw_dot_11n_dev_cap)) + ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; + else + ht_info->cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; + + if (ISSUPP_SHORTGI20(adapter->hw_dot_11n_dev_cap)) + ht_info->cap |= IEEE80211_HT_CAP_SGI_20; + else + ht_info->cap &= ~IEEE80211_HT_CAP_SGI_20; + + if (ISSUPP_SHORTGI40(adapter->hw_dot_11n_dev_cap)) + ht_info->cap |= IEEE80211_HT_CAP_SGI_40; + else + ht_info->cap &= ~IEEE80211_HT_CAP_SGI_40; + + if (ISSUPP_RXSTBC(adapter->hw_dot_11n_dev_cap)) + ht_info->cap |= 1 << IEEE80211_HT_CAP_RX_STBC_SHIFT; + else + ht_info->cap &= ~(3 << IEEE80211_HT_CAP_RX_STBC_SHIFT); + + if (ISSUPP_TXSTBC(adapter->hw_dot_11n_dev_cap)) + ht_info->cap |= IEEE80211_HT_CAP_TX_STBC; + else + ht_info->cap &= ~IEEE80211_HT_CAP_TX_STBC; + + ht_info->cap &= ~IEEE80211_HT_CAP_MAX_AMSDU; + ht_info->cap |= IEEE80211_HT_CAP_SM_PS; + + rx_mcs_supp = GET_RXMCSSUPP(adapter->hw_dev_mcs_support); /* Set MCS for 1x1 */ memset(mcs, 0xff, rx_mcs_supp); /* Clear all the other values */ |