mwifiex: add 802.11AC support

For STA mode, collect VHT realated IEs from the Beacons or Probe
Responses and append similar VHT related IEs to association
requests.

For AP mode, get VHT related capability information and share it
with cfg80211 at the time of wiphy register. This information is
further used by cfg80211 and hostapd to start an AP with 802.11AC
support.

Currently only 8897 supports 802.11AC.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 119 insertions, 8 deletions

diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index ebe2f6a7984..25acb0682c5 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -49,13 +49,23 @@ struct tx_packet_hdr {
 #define A_SUPPORTED_RATES               9
 #define HOSTCMD_SUPPORTED_RATES         14
 #define N_SUPPORTED_RATES               3
-#define ALL_802_11_BANDS           (BAND_A | BAND_B | BAND_G | BAND_GN)
+#define ALL_802_11_BANDS           (BAND_A | BAND_B | BAND_G | BAND_GN | \
+				    BAND_AN | BAND_GAC | BAND_AAC)
 
-#define FW_MULTI_BANDS_SUPPORT  (BIT(8) | BIT(9) | BIT(10) | BIT(11))
+#define FW_MULTI_BANDS_SUPPORT  (BIT(8) | BIT(9) | BIT(10) | BIT(11) | \
+				 BIT(12) | BIT(13))
 #define IS_SUPPORT_MULTI_BANDS(adapter)        \
 	(adapter->fw_cap_info & FW_MULTI_BANDS_SUPPORT)
+
+/* shift bit 12 and bit 13 in fw_cap_info from the firmware to bit 13 and 14
+ * for 11ac so that bit 11 is for GN, bit 12 for AN, bit 13 for GAC, and bit
+ * bit 14 for AAC, in order to be compatible with the band capability
+ * defined in the driver after right shift of 8 bits.
+ */
 #define GET_FW_DEFAULT_BANDS(adapter)  \
-	((adapter->fw_cap_info >> 8) & ALL_802_11_BANDS)
+	    (((((adapter->fw_cap_info & 0x3000) << 1) | \
+	       (adapter->fw_cap_info & ~0xF000)) >> 8) & \
+	     ALL_802_11_BANDS)
 
 #define HostCmd_WEP_KEY_INDEX_MASK              0x3fff
 
@@ -216,6 +226,47 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 
 #define LLC_SNAP_LEN    8
 
+/* HW_SPEC fw_cap_info */
+
+#define ISSUPP_11ACENABLED(fw_cap_info) (fw_cap_info & (BIT(13)|BIT(14)))
+
+#define GET_VHTCAP_MAXMPDULEN(vht_cap_info) (vht_cap_info & 0x3)
+#define GET_VHTCAP_CHWDSET(vht_cap_info)    ((vht_cap_info >> 2) & 0x3)
+#define GET_VHTNSSMCS(mcs_mapset, nss) ((mcs_mapset >> (2 * (nss - 1))) & 0x3)
+#define SET_VHTNSSMCS(mcs_mapset, nss, value) (mcs_mapset |= (value & 0x3) << \
+					      (2 * (nss - 1)))
+#define NO_NSS_SUPPORT		0x3
+
+/* HW_SPEC: HTC-VHT supported */
+#define ISSUPP_11ACVHTHTCVHT(Dot11acDevCap) (Dot11acDevCap & BIT(22))
+/* HW_SPEC: VHT TXOP PS support */
+#define ISSUPP_11ACVHTTXOPPS(Dot11acDevCap) (Dot11acDevCap & BIT(21))
+/* HW_SPEC: MU RX beamformee support */
+#define ISSUPP_11ACMURXBEAMFORMEE(Dot11acDevCap) (Dot11acDevCap & BIT(20))
+/* HW_SPEC: MU TX beamformee support */
+#define ISSUPP_11ACMUTXBEAMFORMEE(Dot11acDevCap) (Dot11acDevCap & BIT(19))
+/* HW_SPEC: SU Beamformee support */
+#define ISSUPP_11ACSUBEAMFORMEE(Dot11acDevCap) (Dot11acDevCap & BIT(10))
+/* HW_SPEC: SU Beamformer support */
+#define ISSUPP_11ACSUBEAMFORMER(Dot11acDevCap) (Dot11acDevCap & BIT(9))
+/* HW_SPEC: Rx STBC support */
+#define ISSUPP_11ACRXSTBC(Dot11acDevCap) (Dot11acDevCap & BIT(8))
+/* HW_SPEC: Tx STBC support */
+#define ISSUPP_11ACTXSTBC(Dot11acDevCap) (Dot11acDevCap & BIT(7))
+/* HW_SPEC: Short GI support for 160MHz BW */
+#define ISSUPP_11ACSGI160(Dot11acDevCap) (Dot11acDevCap & BIT(6))
+/* HW_SPEC: Short GI support for 80MHz BW */
+#define ISSUPP_11ACSGI80(Dot11acDevCap) (Dot11acDevCap & BIT(5))
+/* HW_SPEC: LDPC coding support */
+#define ISSUPP_11ACLDPC(Dot11acDevCap) (Dot11acDevCap & BIT(4))
+/* HW_SPEC: Channel BW 20/40/80/160/80+80 MHz support */
+#define ISSUPP_11ACBW8080(Dot11acDevCap) (Dot11acDevCap & BIT(3))
+/* HW_SPEC: Channel BW 20/40/80/160 MHz support */
+#define ISSUPP_11ACBW160(Dot11acDevCap) (Dot11acDevCap & BIT(2))
+
+#define GET_DEVTXMCSMAP(dev_mcs_map)      (dev_mcs_map >> 16)
+#define GET_DEVRXMCSMAP(dev_mcs_map)      (dev_mcs_map & 0xFFFF)
+
 #define MOD_CLASS_HR_DSSS       0x03
 #define MOD_CLASS_OFDM          0x07
 #define MOD_CLASS_HT            0x08
@@ -455,9 +506,22 @@ struct rxpd {
 	u8 rx_rate;
 	s8 snr;
 	s8 nf;
-	/* Ht Info [Bit 0] RxRate format: LG=0, HT=1
+
+	/* For: Non-802.11 AC cards
+	 *
+	 * Ht Info [Bit 0] RxRate format: LG=0, HT=1
 	 * [Bit 1]  HT Bandwidth: BW20 = 0, BW40 = 1
-	 * [Bit 2]  HT Guard Interval: LGI = 0, SGI = 1 */
+	 * [Bit 2]  HT Guard Interval: LGI = 0, SGI = 1
+	 *
+	 * For: 802.11 AC cards
+	 * [Bit 1] [Bit 0] RxRate format: legacy rate = 00 HT = 01 VHT = 10
+	 * [Bit 3] [Bit 2] HT/VHT Bandwidth BW20 = 00 BW40 = 01
+	 *						BW80 = 10  BW160 = 11
+	 * [Bit 4] HT/VHT Guard interval LGI = 0 SGI = 1
+	 * [Bit 5] STBC support Enabled = 1
+	 * [Bit 6] LDPC support Enabled = 1
+	 * [Bit 7] Reserved
+	 */
 	u8 ht_info;
 	u8 reserved;
 } __packed;
@@ -680,7 +744,11 @@ struct host_cmd_ds_get_hw_spec {
 	__le32 dot_11n_dev_cap;
 	u8 dev_mcs_support;
 	__le16 mp_end_port;	/* SDIO only, reserved for other interfacces */
-	__le16 reserved_4;
+	__le16 mgmt_buf_count;	/* mgmt IE buffer count */
+	__le32 reserved_5;
+	__le32 reserved_6;
+	__le32 dot_11ac_dev_cap;
+	__le32 dot_11ac_mcs_support;
 } __packed;
 
 struct host_cmd_ds_802_11_rssi_info {
@@ -786,6 +854,12 @@ union ieee_types_phy_param_set {
 	struct ieee_types_ds_param_set ds_param_set;
 } __packed;
 
+struct ieee_types_oper_mode_ntf {
+	u8 element_id;
+	u8 len;
+	u8 oper_mode;
+} __packed;
+
 struct host_cmd_ds_802_11_ad_hoc_start {
 	u8 ssid[IEEE80211_MAX_SSID_LEN];
 	u8 bss_mode;
@@ -846,11 +920,27 @@ struct host_cmd_ds_802_11_get_log {
 	__le32 wep_icv_err_cnt[4];
 };
 
+/* Enumeration for rate format */
+enum _mwifiex_rate_format {
+	MWIFIEX_RATE_FORMAT_LG = 0,
+	MWIFIEX_RATE_FORMAT_HT,
+	MWIFIEX_RATE_FORMAT_VHT,
+	MWIFIEX_RATE_FORMAT_AUTO = 0xFF,
+};
+
 struct host_cmd_ds_tx_rate_query {
 	u8 tx_rate;
-	/* Ht Info [Bit 0] RxRate format: LG=0, HT=1
+	/* Tx Rate Info: For 802.11 AC cards
+	 *
+	 * [Bit 0-1] tx rate formate: LG = 0, HT = 1, VHT = 2
+	 * [Bit 2-3] HT/VHT Bandwidth: BW20 = 0, BW40 = 1, BW80 = 2, BW160 = 3
+	 * [Bit 4]   HT/VHT Guard Interval: LGI = 0, SGI = 1
+	 *
+	 * For non-802.11 AC cards
+	 * Ht Info [Bit 0] RxRate format: LG=0, HT=1
 	 * [Bit 1]  HT Bandwidth: BW20 = 0, BW40 = 1
-	 * [Bit 2]  HT Guard Interval: LGI = 0, SGI = 1 */
+	 * [Bit 2]  HT Guard Interval: LGI = 0, SGI = 1
+	 */
 	u8 ht_info;
 } __packed;
 
@@ -1096,6 +1186,7 @@ struct host_cmd_ds_11n_cfg {
 	__le16 action;
 	__le16 ht_tx_cap;
 	__le16 ht_tx_info;
+	__le16 misc_config;	/* Needed for 802.11AC cards only */
 } __packed;
 
 struct host_cmd_ds_txbuf_cfg {
@@ -1183,6 +1274,26 @@ struct mwifiex_ie_types_htcap {
 	struct ieee80211_ht_cap ht_cap;
 } __packed;
 
+struct mwifiex_ie_types_vhtcap {
+	struct mwifiex_ie_types_header header;
+	struct ieee80211_vht_cap vht_cap;
+} __packed;
+
+struct mwifiex_ie_types_oper_mode_ntf {
+	struct mwifiex_ie_types_header header;
+	u8 oper_mode;
+} __packed;
+
+/* VHT Operations IE */
+struct mwifiex_ie_types_vht_oper {
+	struct mwifiex_ie_types_header header;
+	u8 chan_width;
+	u8 chan_center_freq_1;
+	u8 chan_center_freq_2;
+	/* Basic MCS set map, each 2 bits stands for a NSS */
+	u16 basic_mcs_map;
+} __packed;
+
 struct mwifiex_ie_types_wmmcap {
 	struct mwifiex_ie_types_header header;
 	struct mwifiex_types_wmm_info wmm_info;