Merge remote-tracking branch 'wireless-next/master' into HEAD

Merge to get the wil6210 changes that a cfg80211 change needs.
A conflict in drivers/net/wireless/ath/ath9k/init.c was just
whitespace changes.

Also fix a semantic conflict due to cw1200 using WoWLAN which
I had modified in my tree.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

15 files changed, 810 insertions, 317 deletions

diff --git a/drivers/net/wireless/mwifiex/Kconfig b/drivers/net/wireless/mwifiex/Kconfig
index 4f614aad9de..f7ff4725506 100644
--- a/drivers/net/wireless/mwifiex/Kconfig
+++ b/drivers/net/wireless/mwifiex/Kconfig
@@ -3,13 +3,13 @@ config MWIFIEX
 	depends on CFG80211
 	---help---
 	  This adds support for wireless adapters based on Marvell
-	  802.11n chipsets.
+	  802.11n/ac chipsets.
 
 	  If you choose to build it as a module, it will be called
 	  mwifiex.
 
 config MWIFIEX_SDIO
-	tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797"
+	tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8897"
 	depends on MWIFIEX && MMC
 	select FW_LOADER
 	---help---
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 60077895adf..856aea25052 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1231,6 +1231,51 @@ static int mwifiex_cfg80211_change_beacon(struct wiphy *wiphy,
 	return 0;
 }
 
+/* cfg80211 operation handler for del_station.
+ * Function deauthenticates station which value is provided in mac parameter.
+ * If mac is NULL/broadcast, all stations in associated station list are
+ * deauthenticated. If bss is not started or there are no stations in
+ * associated stations list, no action is taken.
+ */
+static int
+mwifiex_cfg80211_del_station(struct wiphy *wiphy, struct net_device *dev,
+			     u8 *mac)
+{
+	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
+	struct mwifiex_sta_node *sta_node;
+	unsigned long flags;
+
+	if (list_empty(&priv->sta_list) || !priv->bss_started)
+		return 0;
+
+	if (!mac || is_broadcast_ether_addr(mac)) {
+		wiphy_dbg(wiphy, "%s: NULL/broadcast mac address\n", __func__);
+		list_for_each_entry(sta_node, &priv->sta_list, list) {
+			if (mwifiex_send_cmd_sync(priv,
+						  HostCmd_CMD_UAP_STA_DEAUTH,
+						  HostCmd_ACT_GEN_SET, 0,
+						  sta_node->mac_addr))
+				return -1;
+			mwifiex_uap_del_sta_data(priv, sta_node);
+		}
+	} else {
+		wiphy_dbg(wiphy, "%s: mac address %pM\n", __func__, mac);
+		spin_lock_irqsave(&priv->sta_list_spinlock, flags);
+		sta_node = mwifiex_get_sta_entry(priv, mac);
+		spin_unlock_irqrestore(&priv->sta_list_spinlock, flags);
+		if (sta_node) {
+			if (mwifiex_send_cmd_sync(priv,
+						  HostCmd_CMD_UAP_STA_DEAUTH,
+						  HostCmd_ACT_GEN_SET, 0,
+						  sta_node->mac_addr))
+				return -1;
+			mwifiex_uap_del_sta_data(priv, sta_node);
+		}
+	}
+
+	return 0;
+}
+
 static int
 mwifiex_cfg80211_set_antenna(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant)
 {
@@ -1859,6 +1904,7 @@ mwifiex_cfg80211_scan(struct wiphy *wiphy,
 	int i, offset, ret;
 	struct ieee80211_channel *chan;
 	struct ieee_types_header *ie;
+	struct mwifiex_user_scan_cfg *user_scan_cfg;
 
 	wiphy_dbg(wiphy, "info: received scan request on %s\n", dev->name);
 
@@ -1869,20 +1915,22 @@ mwifiex_cfg80211_scan(struct wiphy *wiphy,
 		return -EBUSY;
 	}
 
-	if (priv->user_scan_cfg) {
+	/* Block scan request if scan operation or scan cleanup when interface
+	 * is disabled is in process
+	 */
+	if (priv->scan_request || priv->scan_aborting) {
 		dev_err(priv->adapter->dev, "cmd: Scan already in process..\n");
 		return -EBUSY;
 	}
 
-	priv->user_scan_cfg = kzalloc(sizeof(struct mwifiex_user_scan_cfg),
-				      GFP_KERNEL);
-	if (!priv->user_scan_cfg)
+	user_scan_cfg = kzalloc(sizeof(*user_scan_cfg), GFP_KERNEL);
+	if (!user_scan_cfg)
 		return -ENOMEM;
 
 	priv->scan_request = request;
 
-	priv->user_scan_cfg->num_ssids = request->n_ssids;
-	priv->user_scan_cfg->ssid_list = request->ssids;
+	user_scan_cfg->num_ssids = request->n_ssids;
+	user_scan_cfg->ssid_list = request->ssids;
 
 	if (request->ie && request->ie_len) {
 		offset = 0;
@@ -1902,25 +1950,25 @@ mwifiex_cfg80211_scan(struct wiphy *wiphy,
 	for (i = 0; i < min_t(u32, request->n_channels,
 			      MWIFIEX_USER_SCAN_CHAN_MAX); i++) {
 		chan = request->channels[i];
-		priv->user_scan_cfg->chan_list[i].chan_number = chan->hw_value;
-		priv->user_scan_cfg->chan_list[i].radio_type = chan->band;
+		user_scan_cfg->chan_list[i].chan_number = chan->hw_value;
+		user_scan_cfg->chan_list[i].radio_type = chan->band;
 
 		if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)
-			priv->user_scan_cfg->chan_list[i].scan_type =
+			user_scan_cfg->chan_list[i].scan_type =
 						MWIFIEX_SCAN_TYPE_PASSIVE;
 		else
-			priv->user_scan_cfg->chan_list[i].scan_type =
+			user_scan_cfg->chan_list[i].scan_type =
 						MWIFIEX_SCAN_TYPE_ACTIVE;
 
-		priv->user_scan_cfg->chan_list[i].scan_time = 0;
+		user_scan_cfg->chan_list[i].scan_time = 0;
 	}
 
-	ret = mwifiex_scan_networks(priv, priv->user_scan_cfg);
+	ret = mwifiex_scan_networks(priv, user_scan_cfg);
+	kfree(user_scan_cfg);
 	if (ret) {
 		dev_err(priv->adapter->dev, "scan failed: %d\n", ret);
+		priv->scan_aborting = false;
 		priv->scan_request = NULL;
-		kfree(priv->user_scan_cfg);
-		priv->user_scan_cfg = NULL;
 		return ret;
 	}
 
@@ -2419,6 +2467,7 @@ static struct cfg80211_ops mwifiex_cfg80211_ops = {
 	.change_beacon = mwifiex_cfg80211_change_beacon,
 	.set_cqm_rssi_config = mwifiex_cfg80211_set_cqm_rssi_config,
 	.set_antenna = mwifiex_cfg80211_set_antenna,
+	.del_station = mwifiex_cfg80211_del_station,
 #ifdef CONFIG_PM
 	.suspend = mwifiex_cfg80211_suspend,
 	.resume = mwifiex_cfg80211_resume,
diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index 26755d9acb5..2d761477d15 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -570,6 +570,7 @@ int mwifiex_send_cmd_async(struct mwifiex_private *priv, uint16_t cmd_no,
 		case HostCmd_CMD_UAP_SYS_CONFIG:
 		case HostCmd_CMD_UAP_BSS_START:
 		case HostCmd_CMD_UAP_BSS_STOP:
+		case HostCmd_CMD_UAP_STA_DEAUTH:
 			ret = mwifiex_uap_prepare_cmd(priv, cmd_no, cmd_action,
 						      cmd_oid, data_buf,
 						      cmd_ptr);
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 1f7578d553e..d6ada7354c1 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -271,6 +271,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 #define HostCmd_CMD_802_11_SUBSCRIBE_EVENT            0x0075
 #define HostCmd_CMD_802_11_TX_RATE_QUERY              0x007f
 #define HostCmd_CMD_802_11_IBSS_COALESCING_STATUS     0x0083
+#define HostCmd_CMD_CFG_DATA                          0x008f
 #define HostCmd_CMD_VERSION_EXT                       0x0097
 #define HostCmd_CMD_MEF_CFG                           0x009a
 #define HostCmd_CMD_RSSI_INFO                         0x00a4
@@ -279,6 +280,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 #define HostCmd_CMD_UAP_SYS_CONFIG                    0x00b0
 #define HostCmd_CMD_UAP_BSS_START                     0x00b1
 #define HostCmd_CMD_UAP_BSS_STOP                      0x00b2
+#define HostCmd_CMD_UAP_STA_DEAUTH                    0x00b5
 #define HostCmd_CMD_11N_CFG                           0x00cd
 #define HostCmd_CMD_11N_ADDBA_REQ                     0x00ce
 #define HostCmd_CMD_11N_ADDBA_RSP                     0x00cf
@@ -464,6 +466,8 @@ enum P2P_MODES {
 #define MWIFIEX_CRITERIA_UNICAST	BIT(1)
 #define MWIFIEX_CRITERIA_MULTICAST	BIT(3)
 
+#define CFG_DATA_TYPE_CAL		2
+
 struct mwifiex_ie_types_header {
 	__le16 type;
 	__le16 len;
@@ -1197,6 +1201,11 @@ struct host_cmd_ds_amsdu_aggr_ctrl {
 	__le16 curr_buf_size;
 } __packed;
 
+struct host_cmd_ds_sta_deauth {
+	u8 mac[ETH_ALEN];
+	__le16 reason;
+} __packed;
+
 struct mwifiex_ie_types_wmm_param_set {
 	struct mwifiex_ie_types_header header;
 	u8 wmm_ie[1];
@@ -1573,6 +1582,12 @@ struct mwifiex_ie_list {
 	struct mwifiex_ie ie_list[MAX_MGMT_IE_INDEX];
 } __packed;
 
+struct host_cmd_ds_802_11_cfg_data {
+	__le16 action;
+	__le16 type;
+	__le16 data_len;
+} __packed;
+
 struct host_cmd_ds_command {
 	__le16 command;
 	__le16 size;
@@ -1630,7 +1645,9 @@ struct host_cmd_ds_command {
 		struct host_cmd_ds_802_11_eeprom_access eeprom;
 		struct host_cmd_ds_802_11_subsc_evt subsc_evt;
 		struct host_cmd_ds_sys_config uap_sys_config;
+		struct host_cmd_ds_sta_deauth sta_deauth;
 		struct host_cmd_11ac_vht_cfg vht_cfg;
+		struct host_cmd_ds_802_11_cfg_data cfg_data;
 	} params;
 } __packed;
 
diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index 9f44fda19db..c7f11c0c3bb 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -59,6 +59,9 @@ static void scan_delay_timer_fn(unsigned long data)
 	struct cmd_ctrl_node *cmd_node, *tmp_node;
 	unsigned long flags;
 
+	if (adapter->surprise_removed)
+		return;
+
 	if (adapter->scan_delay_cnt == MWIFIEX_MAX_SCAN_DELAY_CNT) {
 		/*
 		 * Abort scan operation by cancelling all pending scan
@@ -78,19 +81,13 @@ static void scan_delay_timer_fn(unsigned long data)
 		adapter->empty_tx_q_cnt = 0;
 		spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags);
 
-		if (priv->user_scan_cfg) {
-			if (priv->scan_request) {
-				dev_dbg(priv->adapter->dev,
-					"info: aborting scan\n");
-				cfg80211_scan_done(priv->scan_request, 1);
-				priv->scan_request = NULL;
-			} else {
-				dev_dbg(priv->adapter->dev,
-					"info: scan already aborted\n");
-			}
-
-			kfree(priv->user_scan_cfg);
-			priv->user_scan_cfg = NULL;
+		if (priv->scan_request) {
+			dev_dbg(adapter->dev, "info: aborting scan\n");
+			cfg80211_scan_done(priv->scan_request, 1);
+			priv->scan_request = NULL;
+		} else {
+			priv->scan_aborting = false;
+			dev_dbg(adapter->dev, "info: scan already aborted\n");
 		}
 		goto done;
 	}
@@ -447,23 +444,29 @@ static void mwifiex_free_lock_list(struct mwifiex_adapter *adapter)
 }
 
 /*
- * This function frees the adapter structure.
+ * This function performs cleanup for adapter structure.
  *
- * The freeing operation is done recursively, by canceling all
- * pending commands, freeing the member buffers previously
- * allocated (command buffers, scan table buffer, sleep confirm
- * command buffer), stopping the timers and calling the cleanup
- * routines for every interface, before the actual adapter
- * structure is freed.
+ * The cleanup is done recursively, by canceling all pending
+ * commands, freeing the member buffers previously allocated
+ * (command buffers, scan table buffer, sleep confirm command
+ * buffer), stopping the timers and calling the cleanup routines
+ * for every interface.
  */
 static void
-mwifiex_free_adapter(struct mwifiex_adapter *adapter)
+mwifiex_adapter_cleanup(struct mwifiex_adapter *adapter)
 {
+	int i;
+
 	if (!adapter) {
 		pr_err("%s: adapter is NULL\n", __func__);
 		return;
 	}
 
+	for (i = 0; i < adapter->priv_num; i++) {
+		if (adapter->priv[i])
+			del_timer_sync(&adapter->priv[i]->scan_delay_timer);
+	}
+
 	mwifiex_cancel_all_pending_cmd(adapter);
 
 	/* Free lock variables */
@@ -684,7 +687,6 @@ mwifiex_shutdown_drv(struct mwifiex_adapter *adapter)
 	int ret = -EINPROGRESS;
 	struct mwifiex_private *priv;
 	s32 i;
-	unsigned long flags;
 	struct sk_buff *skb;
 
 	/* mwifiex already shutdown */
@@ -719,7 +721,7 @@ mwifiex_shutdown_drv(struct mwifiex_adapter *adapter)
 		}
 	}
 
-	spin_lock_irqsave(&adapter->mwifiex_lock, flags);
+	spin_lock(&adapter->mwifiex_lock);
 
 	if (adapter->if_ops.data_complete) {
 		while ((skb = skb_dequeue(&adapter->usb_rx_data_q))) {
@@ -733,10 +735,9 @@ mwifiex_shutdown_drv(struct mwifiex_adapter *adapter)
 		}
 	}
 
-	/* Free adapter structure */
-	mwifiex_free_adapter(adapter);
+	mwifiex_adapter_cleanup(adapter);
 
-	spin_unlock_irqrestore(&adapter->mwifiex_lock, flags);
+	spin_unlock(&adapter->mwifiex_lock);
 
 	/* Notify completion */
 	ret = mwifiex_shutdown_fw_complete(adapter);
diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c
index 6bcb66e6e97..122175af18c 100644
--- a/drivers/net/wireless/mwifiex/join.c
+++ b/drivers/net/wireless/mwifiex/join.c
@@ -919,9 +919,8 @@ mwifiex_cmd_802_11_ad_hoc_start(struct mwifiex_private *priv,
 	memcpy(&priv->curr_bss_params.data_rates,
 	       &adhoc_start->data_rate, priv->curr_bss_params.num_of_rates);
 
-	dev_dbg(adapter->dev, "info: ADHOC_S_CMD: rates=%02x %02x %02x %02x\n",
-		adhoc_start->data_rate[0], adhoc_start->data_rate[1],
-		adhoc_start->data_rate[2], adhoc_start->data_rate[3]);
+	dev_dbg(adapter->dev, "info: ADHOC_S_CMD: rates=%4ph\n",
+		adhoc_start->data_rate);
 
 	dev_dbg(adapter->dev, "info: ADHOC_S_CMD: AD-HOC Start command is ready\n");
 
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index 2eb88ea9acf..5bc7ef8d04d 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -25,6 +25,8 @@
 #define VERSION	"1.0"
 
 const char driver_version[] = "mwifiex " VERSION " (%s) ";
+static char *cal_data_cfg;
+module_param(cal_data_cfg, charp, 0);
 
 /*
  * This function registers the device and performs all the necessary
@@ -336,6 +338,13 @@ static void mwifiex_fw_dpc(const struct firmware *firmware, void *context)
 
 	dev_notice(adapter->dev, "WLAN FW is active\n");
 
+	if (cal_data_cfg) {
+		if ((request_firmware(&adapter->cal_data, cal_data_cfg,
+				      adapter->dev)) < 0)
+			dev_err(adapter->dev,
+				"Cal data request_firmware() failed\n");
+	}
+
 	adapter->init_wait_q_woken = false;
 	ret = mwifiex_init_fw(adapter);
 	if (ret == -1) {
@@ -390,6 +399,10 @@ err_init_fw:
 	pr_debug("info: %s: unregister device\n", __func__);
 	adapter->if_ops.unregister_dev(adapter);
 done:
+	if (adapter->cal_data) {
+		release_firmware(adapter->cal_data);
+		adapter->cal_data = NULL;
+	}
 	release_firmware(adapter->firmware);
 	complete(&adapter->fw_load);
 	return;
@@ -436,6 +449,7 @@ mwifiex_close(struct net_device *dev)
 		dev_dbg(priv->adapter->dev, "aborting scan on ndo_stop\n");
 		cfg80211_scan_done(priv->scan_request, 1);
 		priv->scan_request = NULL;
+		priv->scan_aborting = true;
 	}
 
 	return 0;
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 4ef67fca06d..0832c2437da 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -492,7 +492,6 @@ struct mwifiex_private {
 	struct semaphore async_sem;
 	u8 report_scan_result;
 	struct cfg80211_scan_request *scan_request;
-	struct mwifiex_user_scan_cfg *user_scan_cfg;
 	u8 cfg_bssid[6];
 	struct wps wps;
 	u8 scan_block;
@@ -510,6 +509,7 @@ struct mwifiex_private {
 	u8 ap_11ac_enabled;
 	u32 mgmt_frame_mask;
 	struct mwifiex_roc_cfg roc_cfg;
+	bool scan_aborting;
 };
 
 enum mwifiex_ba_status {
@@ -730,6 +730,7 @@ struct mwifiex_adapter {
 	u16 max_mgmt_ie_index;
 	u8 scan_delay_cnt;
 	u8 empty_tx_q_cnt;
+	const struct firmware *cal_data;
 
 	/* 11AC */
 	u32 is_hw_11ac_capable;
@@ -1115,6 +1116,8 @@ int mwifiex_set_mgmt_ies(struct mwifiex_private *priv,
 			 struct cfg80211_beacon_data *data);
 int mwifiex_del_mgmt_ies(struct mwifiex_private *priv);
 u8 *mwifiex_11d_code_2_region(u8 code);
+void mwifiex_uap_del_sta_data(struct mwifiex_private *priv,
+			      struct mwifiex_sta_node *node);
 
 extern const struct ethtool_ops mwifiex_ethtool_ops;
 
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index 9cf5d8f07df..801b6b72837 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -1784,22 +1784,17 @@ check_next_scan:
 		if (priv->report_scan_result)
 			priv->report_scan_result = false;
 
-		if (priv->user_scan_cfg) {
-			if (priv->scan_request) {
-				dev_dbg(priv->adapter->dev,
-					"info: notifying scan done\n");
-				cfg80211_scan_done(priv->scan_request, 0);
-				priv->scan_request = NULL;
-			} else {
-				dev_dbg(priv->adapter->dev,
-					"info: scan already aborted\n");
-			}
-
-			kfree(priv->user_scan_cfg);
-			priv->user_scan_cfg = NULL;
+		if (priv->scan_request) {
+			dev_dbg(adapter->dev, "info: notifying scan done\n");
+			cfg80211_scan_done(priv->scan_request, 0);
+			priv->scan_request = NULL;
+		} else {
+			priv->scan_aborting = false;
+			dev_dbg(adapter->dev, "info: scan already aborted\n");
 		}
 	} else {
-		if (priv->user_scan_cfg && !priv->scan_request) {
+		if ((priv->scan_aborting && !priv->scan_request) ||
+		    priv->scan_block) {
 			spin_unlock_irqrestore(&adapter->scan_pending_q_lock,
 					       flags);
 			adapter->scan_delay_cnt = MWIFIEX_MAX_SCAN_DELAY_CNT;
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index 363ba31b58b..5ee5ed02ecc 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -77,6 +77,17 @@ mwifiex_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id)
 
 	func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
 
+	if (id->driver_data) {
+		struct mwifiex_sdio_device *data = (void *)id->driver_data;
+
+		card->firmware = data->firmware;
+		card->reg = data->reg;
+		card->max_ports = data->max_ports;
+		card->mp_agg_pkt_limit = data->mp_agg_pkt_limit;
+		card->supports_sdio_new_mode = data->supports_sdio_new_mode;
+		card->has_control_mask = data->has_control_mask;
+	}
+
 	sdio_claim_host(func);
 	ret = sdio_enable_func(func);
 	sdio_release_host(func);
@@ -251,12 +262,19 @@ static int mwifiex_sdio_resume(struct device *dev)
 #define SDIO_DEVICE_ID_MARVELL_8787   (0x9119)
 /* Device ID for SD8797 */
 #define SDIO_DEVICE_ID_MARVELL_8797   (0x9129)
+/* Device ID for SD8897 */
+#define SDIO_DEVICE_ID_MARVELL_8897   (0x912d)
 
 /* WLAN IDs */
 static const struct sdio_device_id mwifiex_ids[] = {
-	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8786)},
-	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8787)},
-	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8797)},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8786),
+		.driver_data = (unsigned long) &mwifiex_sdio_sd8786},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8787),
+		.driver_data = (unsigned long) &mwifiex_sdio_sd8787},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8797),
+		.driver_data = (unsigned long) &mwifiex_sdio_sd8797},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8897),
+		.driver_data = (unsigned long) &mwifiex_sdio_sd8897},
 	{},
 };
 
@@ -282,13 +300,13 @@ static struct sdio_driver mwifiex_sdio = {
  * This function writes data into SDIO card register.
  */
 static int
-mwifiex_write_reg(struct mwifiex_adapter *adapter, u32 reg, u32 data)
+mwifiex_write_reg(struct mwifiex_adapter *adapter, u32 reg, u8 data)
 {
 	struct sdio_mmc_card *card = adapter->card;
 	int ret = -1;
 
 	sdio_claim_host(card->func);
-	sdio_writeb(card->func, (u8) data, reg, &ret);
+	sdio_writeb(card->func, data, reg, &ret);
 	sdio_release_host(card->func);
 
 	return ret;
@@ -298,7 +316,7 @@ mwifiex_write_reg(struct mwifiex_adapter *adapter, u32 reg, u32 data)
  * This function reads data from SDIO card register.
  */
 static int
-mwifiex_read_reg(struct mwifiex_adapter *adapter, u32 reg, u32 *data)
+mwifiex_read_reg(struct mwifiex_adapter *adapter, u32 reg, u8 *data)
 {
 	struct sdio_mmc_card *card = adapter->card;
 	int ret = -1;
@@ -400,7 +418,40 @@ static int mwifiex_pm_wakeup_card_complete(struct mwifiex_adapter *adapter)
 }
 
 /*
- * This function initializes the IO ports.
+ * This function is used to initialize IO ports for the
+ * chipsets supporting SDIO new mode eg SD8897.
+ */
+static int mwifiex_init_sdio_new_mode(struct mwifiex_adapter *adapter)
+{
+	u8 reg;
+
+	adapter->ioport = MEM_PORT;
+
+	/* enable sdio new mode */
+	if (mwifiex_read_reg(adapter, CARD_CONFIG_2_1_REG, &reg))
+		return -1;
+	if (mwifiex_write_reg(adapter, CARD_CONFIG_2_1_REG,
+			      reg | CMD53_NEW_MODE))
+		return -1;
+
+	/* Configure cmd port and enable reading rx length from the register */
+	if (mwifiex_read_reg(adapter, CMD_CONFIG_0, &reg))
+		return -1;
+	if (mwifiex_write_reg(adapter, CMD_CONFIG_0, reg | CMD_PORT_RD_LEN_EN))
+		return -1;
+
+	/* Enable Dnld/Upld ready auto reset for cmd port after cmd53 is
+	 * completed
+	 */
+	if (mwifiex_read_reg(adapter, CMD_CONFIG_1, &reg))
+		return -1;
+	if (mwifiex_write_reg(adapter, CMD_CONFIG_1, reg | CMD_PORT_AUTO_EN))
+		return -1;
+
+	return 0;
+}
+
+/* This function initializes the IO ports.
  *
  * The following operations are performed -
  *      - Read the IO ports (0, 1 and 2)
@@ -409,10 +460,17 @@ static int mwifiex_pm_wakeup_card_complete(struct mwifiex_adapter *adapter)
  */
 static int mwifiex_init_sdio_ioport(struct mwifiex_adapter *adapter)
 {
-	u32 reg;
+	u8 reg;
+	struct sdio_mmc_card *card = adapter->card;
 
 	adapter->ioport = 0;
 
+	if (card->supports_sdio_new_mode) {
+		if (mwifiex_init_sdio_new_mode(adapter))
+			return -1;
+		goto cont;
+	}
+
 	/* Read the IO port */
 	if (!mwifiex_read_reg(adapter, IO_PORT_0_REG, &reg))
 		adapter->ioport |= (reg & 0xff);
@@ -428,19 +486,19 @@ static int mwifiex_init_sdio_ioport(struct mwifiex_adapter *adapter)
 		adapter->ioport |= ((reg & 0xff) << 16);
 	else
 		return -1;
-
+cont:
 	pr_debug("info: SDIO FUNC1 IO port: %#x\n", adapter->ioport);
 
 	/* Set Host interrupt reset to read to clear */
 	if (!mwifiex_read_reg(adapter, HOST_INT_RSR_REG, &reg))
 		mwifiex_write_reg(adapter, HOST_INT_RSR_REG,
-				  reg | SDIO_INT_MASK);
+				  reg | card->reg->sdio_int_mask);
 	else
 		return -1;
 
 	/* Dnld/Upld ready set to auto reset */
-	if (!mwifiex_read_reg(adapter, CARD_MISC_CFG_REG, &reg))
-		mwifiex_write_reg(adapter, CARD_MISC_CFG_REG,
+	if (!mwifiex_read_reg(adapter, card->reg->card_misc_cfg_reg, &reg))
+		mwifiex_write_reg(adapter, card->reg->card_misc_cfg_reg,
 				  reg | AUTO_RE_ENABLE_INT);
 	else
 		return -1;
@@ -486,34 +544,42 @@ static int mwifiex_write_data_to_card(struct mwifiex_adapter *adapter,
 static int mwifiex_get_rd_port(struct mwifiex_adapter *adapter, u8 *port)
 {
 	struct sdio_mmc_card *card = adapter->card;
-	u16 rd_bitmap = card->mp_rd_bitmap;
+	const struct mwifiex_sdio_card_reg *reg = card->reg;
+	u32 rd_bitmap = card->mp_rd_bitmap;
 
-	dev_dbg(adapter->dev, "data: mp_rd_bitmap=0x%04x\n", rd_bitmap);
+	dev_dbg(adapter->dev, "data: mp_rd_bitmap=0x%08x\n", rd_bitmap);
 
-	if (!(rd_bitmap & (CTRL_PORT_MASK | DATA_PORT_MASK)))
-		return -1;
+	if (card->supports_sdio_new_mode) {
+		if (!(rd_bitmap & reg->data_port_mask))
+			return -1;
+	} else {
+		if (!(rd_bitmap & (CTRL_PORT_MASK | reg->data_port_mask)))
+			return -1;
+	}
 
-	if (card->mp_rd_bitmap & CTRL_PORT_MASK) {
-		card->mp_rd_bitmap &= (u16) (~CTRL_PORT_MASK);
+	if ((card->has_control_mask) &&
+	    (card->mp_rd_bitmap & CTRL_PORT_MASK)) {
+		card->mp_rd_bitmap &= (u32) (~CTRL_PORT_MASK);
 		*port = CTRL_PORT;
-		dev_dbg(adapter->dev, "data: port=%d mp_rd_bitmap=0x%04x\n",
+		dev_dbg(adapter->dev, "data: port=%d mp_rd_bitmap=0x%08x\n",
 			*port, card->mp_rd_bitmap);
-	} else {
-		if (card->mp_rd_bitmap & (1 << card->curr_rd_port)) {
-			card->mp_rd_bitmap &= (u16)
-						(~(1 << card->curr_rd_port));
-			*port = card->curr_rd_port;
+		return 0;
+	}
 
-			if (++card->curr_rd_port == MAX_PORT)
-				card->curr_rd_port = 1;
-		} else {
-			return -1;
-		}
+	if (!(card->mp_rd_bitmap & (1 << card->curr_rd_port)))
+		return -1;
+
+	/* We are now handling the SDIO data ports */
+	card->mp_rd_bitmap &= (u32)(~(1 << card->curr_rd_port));
+	*port = card->curr_rd_port;
+
+	if (++card->curr_rd_port == card->max_ports)
+		card->curr_rd_port = reg->start_rd_port;
+
+	dev_dbg(adapter->dev,
+		"data: port=%d mp_rd_bitmap=0x%08x -> 0x%08x\n",
+		*port, rd_bitmap, card->mp_rd_bitmap);
 
-		dev_dbg(adapter->dev,
-			"data: port=%d mp_rd_bitmap=0x%04x -> 0x%04x\n",
-			*port, rd_bitmap, card->mp_rd_bitmap);
-	}
 	return 0;
 }
 
@@ -524,35 +590,45 @@ static int mwifiex_get_rd_port(struct mwifiex_adapter *adapter, u8 *port)
  * increased (provided it does not reach the maximum limit, in which
  * case it is reset to 1)
  */
-static int mwifiex_get_wr_port_data(struct mwifiex_adapter *adapter, u8 *port)
+static int mwifiex_get_wr_port_data(struct mwifiex_adapter *adapter, u32 *port)
 {
 	struct sdio_mmc_card *card = adapter->card;
-	u16 wr_bitmap = card->mp_wr_bitmap;
+	const struct mwifiex_sdio_card_reg *reg = card->reg;
+	u32 wr_bitmap = card->mp_wr_bitmap;
 
-	dev_dbg(adapter->dev, "data: mp_wr_bitmap=0x%04x\n", wr_bitmap);
+	dev_dbg(adapter->dev, "data: mp_wr_bitmap=0x%08x\n", wr_bitmap);
 
-	if (!(wr_bitmap & card->mp_data_port_mask))
+	if (card->supports_sdio_new_mode &&
+	    !(wr_bitmap & reg->data_port_mask)) {
+		adapter->data_sent = true;
+		return -EBUSY;
+	} else if (!card->supports_sdio_new_mode &&
+		   !(wr_bitmap & card->mp_data_port_mask)) {
 		return -1;
+	}
 
 	if (card->mp_wr_bitmap & (1 << card->curr_wr_port)) {
-		card->mp_wr_bitmap &= (u16) (~(1 << card->curr_wr_port));
+		card->mp_wr_bitmap &= (u32) (~(1 << card->curr_wr_port));
 		*port = card->curr_wr_port;
-		if (++card->curr_wr_port == card->mp_end_port)
-			card->curr_wr_port = 1;
+		if (((card->supports_sdio_new_mode) &&
+		     (++card->curr_wr_port == card->max_ports)) ||
+		    ((!card->supports_sdio_new_mode) &&
+		     (++card->curr_wr_port == card->mp_end_port)))
+			card->curr_wr_port = reg->start_wr_port;
 	} else {
 		adapter->data_sent = true;
 		return -EBUSY;
 	}
 
-	if (*port == CTRL_PORT) {
-		dev_err(adapter->dev, "invalid data port=%d cur port=%d"
-			" mp_wr_bitmap=0x%04x -> 0x%04x\n",
+	if ((card->has_control_mask) && (*port == CTRL_PORT)) {
+		dev_err(adapter->dev,
+			"invalid data port=%d cur port=%d mp_wr_bitmap=0x%08x -> 0x%08x\n",
 			*port, card->curr_wr_port, wr_bitmap,
 			card->mp_wr_bitmap);
 		return -1;
 	}
 
-	dev_dbg(adapter->dev, "data: port=%d mp_wr_bitmap=0x%04x -> 0x%04x\n",
+	dev_dbg(adapter->dev, "data: port=%d mp_wr_bitmap=0x%08x -> 0x%08x\n",
 		*port, wr_bitmap, card->mp_wr_bitmap);
 
 	return 0;
@@ -564,11 +640,12 @@ static int mwifiex_get_wr_port_data(struct mwifiex_adapter *adapter, u8 *port)
 static int
 mwifiex_sdio_poll_card_status(struct mwifiex_adapter *adapter, u8 bits)
 {
+	struct sdio_mmc_card *card = adapter->card;
 	u32 tries;
-	u32 cs;
+	u8 cs;
 
 	for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
-		if (mwifiex_read_reg(adapter, CARD_STATUS_REG, &cs))
+		if (mwifiex_read_reg(adapter, card->reg->poll_reg, &cs))
 			break;
 		else if ((cs & bits) == bits)
 			return 0;
@@ -587,12 +664,14 @@ mwifiex_sdio_poll_card_status(struct mwifiex_adapter *adapter, u8 bits)
 static int
 mwifiex_sdio_read_fw_status(struct mwifiex_adapter *adapter, u16 *dat)
 {
-	u32 fws0, fws1;
+	struct sdio_mmc_card *card = adapter->card;
+	const struct mwifiex_sdio_card_reg *reg = card->reg;
+	u8 fws0, fws1;
 
-	if (mwifiex_read_reg(adapter, CARD_FW_STATUS0_REG, &fws0))
+	if (mwifiex_read_reg(adapter, reg->status_reg_0, &fws0))
 		return -1;
 
-	if (mwifiex_read_reg(adapter, CARD_FW_STATUS1_REG, &fws1))
+	if (mwifiex_read_reg(adapter, reg->status_reg_1, &fws1))
 		return -1;
 
 	*dat = (u16) ((fws1 << 8) | fws0);
@@ -608,14 +687,14 @@ mwifiex_sdio_read_fw_status(struct mwifiex_adapter *adapter, u16 *dat)
  */
 static int mwifiex_sdio_disable_host_int(struct mwifiex_adapter *adapter)
 {
-	u32 host_int_mask;
+	u8 host_int_mask, host_int_disable = HOST_INT_DISABLE;
 
 	/* Read back the host_int_mask register */
 	if (mwifiex_read_reg(adapter, HOST_INT_MASK_REG, &host_int_mask))
 		return -1;
 
 	/* Update with the mask and write back to the register */
-	host_int_mask &= ~HOST_INT_DISABLE;
+	host_int_mask &= ~host_int_disable;
 
 	if (mwifiex_write_reg(adapter, HOST_INT_MASK_REG, host_int_mask)) {
 		dev_err(adapter->dev, "disable host interrupt failed\n");
@@ -633,8 +712,11 @@ static int mwifiex_sdio_disable_host_int(struct mwifiex_adapter *adapter)
  */
 static int mwifiex_sdio_enable_host_int(struct mwifiex_adapter *adapter)
 {
+	struct sdio_mmc_card *card = adapter->card;
+
 	/* Simply write the mask to the register */
-	if (mwifiex_write_reg(adapter, HOST_INT_MASK_REG, HOST_INT_ENABLE)) {
+	if (mwifiex_write_reg(adapter, HOST_INT_MASK_REG,
+			      card->reg->host_int_enable)) {
 		dev_err(adapter->dev, "enable host interrupt failed\n");
 		return -1;
 	}
@@ -686,11 +768,13 @@ static int mwifiex_sdio_card_to_host(struct mwifiex_adapter *adapter,
 static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter,
 				    struct mwifiex_fw_image *fw)
 {
+	struct sdio_mmc_card *card = adapter->card;
+	const struct mwifiex_sdio_card_reg *reg = card->reg;
 	int ret;
 	u8 *firmware = fw->fw_buf;
 	u32 firmware_len = fw->fw_len;
 	u32 offset = 0;
-	u32 base0, base1;
+	u8 base0, base1;
 	u8 *fwbuf;
 	u16 len = 0;
 	u32 txlen, tx_blocks = 0, tries;
@@ -727,7 +811,7 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter,
 			break;
 
 		for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
-			ret = mwifiex_read_reg(adapter, HOST_F1_RD_BASE_0,
+			ret = mwifiex_read_reg(adapter, reg->base_0_reg,
 					       &base0);
 			if (ret) {
 				dev_err(adapter->dev,
@@ -736,7 +820,7 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter,
 					base0, base0);
 				goto done;
 			}
-			ret = mwifiex_read_reg(adapter, HOST_F1_RD_BASE_1,
+			ret = mwifiex_read_reg(adapter, reg->base_1_reg,
 					       &base1);
 			if (ret) {
 				dev_err(adapter->dev,
@@ -828,10 +912,11 @@ done:
 static int mwifiex_check_fw_status(struct mwifiex_adapter *adapter,
 				   u32 poll_num)
 {
+	struct sdio_mmc_card *card = adapter->card;
 	int ret = 0;
 	u16 firmware_stat;
 	u32 tries;
-	u32 winner_status;
+	u8 winner_status;
 
 	/* Wait for firmware initialization event */
 	for (tries = 0; tries < poll_num; tries++) {
@@ -849,7 +934,7 @@ static int mwifiex_check_fw_status(struct mwifiex_adapter *adapter,
 
 	if (ret) {
 		if (mwifiex_read_reg
-		    (adapter, CARD_FW_STATUS0_REG, &winner_status))
+		    (adapter, card->reg->status_reg_0, &winner_status))
 			winner_status = 0;
 
 		if (winner_status)
@@ -866,12 +951,12 @@ static int mwifiex_check_fw_status(struct mwifiex_adapter *adapter,
 static void mwifiex_interrupt_status(struct mwifiex_adapter *adapter)
 {
 	struct sdio_mmc_card *card = adapter->card;
-	u32 sdio_ireg;
+	u8 sdio_ireg;
 	unsigned long flags;
 
-	if (mwifiex_read_data_sync(adapter, card->mp_regs, MAX_MP_REGS,
-				   REG_PORT | MWIFIEX_SDIO_BYTE_MODE_MASK,
-				   0)) {
+	if (mwifiex_read_data_sync(adapter, card->mp_regs,
+				   card->reg->max_mp_regs,
+				   REG_PORT | MWIFIEX_SDIO_BYTE_MODE_MASK, 0)) {
 		dev_err(adapter->dev, "read mp_regs failed\n");
 		return;
 	}
@@ -880,6 +965,9 @@ static void mwifiex_interrupt_status(struct mwifiex_adapter *adapter)
 	if (sdio_ireg) {
 		/*
 		 * DN_LD_HOST_INT_STATUS and/or UP_LD_HOST_INT_STATUS
+		 * For SDIO new mode CMD port interrupts
+		 *	DN_LD_CMD_PORT_HOST_INT_STATUS and/or
+		 *	UP_LD_CMD_PORT_HOST_INT_STATUS
 		 * Clear the interrupt status register
 		 */
 		dev_dbg(adapter->dev, "int: sdio_ireg = %#x\n", sdio_ireg);
@@ -1003,11 +1091,11 @@ static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter,
 	s32 f_aggr_cur = 0;
 	struct sk_buff *skb_deaggr;
 	u32 pind;
-	u32 pkt_len, pkt_type = 0;
+	u32 pkt_len, pkt_type, mport;
 	u8 *curr_ptr;
 	u32 rx_len = skb->len;
 
-	if (port == CTRL_PORT) {
+	if ((card->has_control_mask) && (port == CTRL_PORT)) {
 		/* Read the command Resp without aggr */
 		dev_dbg(adapter->dev, "info: %s: no aggregation for cmd "
 			"response\n", __func__);
@@ -1024,7 +1112,10 @@ static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter,
 		goto rx_curr_single;
 	}
 
-	if (card->mp_rd_bitmap & (~((u16) CTRL_PORT_MASK))) {
+	if ((!card->has_control_mask && (card->mp_rd_bitmap &
+					 card->reg->data_port_mask)) ||
+	    (card->has_control_mask && (card->mp_rd_bitmap &
+					(~((u32) CTRL_PORT_MASK))))) {
 		/* Some more data RX pending */
 		dev_dbg(adapter->dev, "info: %s: not last packet\n", __func__);
 
@@ -1060,10 +1151,10 @@ static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter,
 	if (f_aggr_cur) {
 		dev_dbg(adapter->dev, "info: current packet aggregation\n");
 		/* Curr pkt can be aggregated */
-		MP_RX_AGGR_SETUP(card, skb, port);
+		mp_rx_aggr_setup(card, skb, port);
 
 		if (MP_RX_AGGR_PKT_LIMIT_REACHED(card) ||
-		    MP_RX_AGGR_PORT_LIMIT_REACHED(card)) {
+		    mp_rx_aggr_port_limit_reached(card)) {
 			dev_dbg(adapter->dev, "info: %s: aggregated packet "
 				"limit reached\n", __func__);
 			/* No more pkts allowed in Aggr buf, rx it */
@@ -1076,11 +1167,28 @@ static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter,
 		dev_dbg(adapter->dev, "info: do_rx_aggr: num of packets: %d\n",
 			card->mpa_rx.pkt_cnt);
 
+		if (card->supports_sdio_new_mode) {
+			int i;
+			u32 port_count;
+
+			for (i = 0, port_count = 0; i < card->max_ports; i++)
+				if (card->mpa_rx.ports & BIT(i))
+					port_count++;
+
+			/* Reading data from "start_port + 0" to "start_port +
+			 * port_count -1", so decrease the count by 1
+			 */
+			port_count--;
+			mport = (adapter->ioport | SDIO_MPA_ADDR_BASE |
+				 (port_count << 8)) + card->mpa_rx.start_port;
+		} else {
+			mport = (adapter->ioport | SDIO_MPA_ADDR_BASE |
+				 (card->mpa_rx.ports << 4)) +
+				 card->mpa_rx.start_port;
+		}
+
 		if (mwifiex_read_data_sync(adapter, card->mpa_rx.buf,
-					   card->mpa_rx.buf_len,
-					   (adapter->ioport | 0x1000 |
-					    (card->mpa_rx.ports << 4)) +
-					   card->mpa_rx.start_port, 1))
+					   card->mpa_rx.buf_len, mport, 1))
 			goto error;
 
 		curr_ptr = card->mpa_rx.buf;
@@ -1167,6 +1275,7 @@ error:
 static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
 {
 	struct sdio_mmc_card *card = adapter->card;
+	const struct mwifiex_sdio_card_reg *reg = card->reg;
 	int ret = 0;
 	u8 sdio_ireg;
 	struct sk_buff *skb;
@@ -1175,6 +1284,8 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
 	u32 rx_blocks;
 	u16 rx_len;
 	unsigned long flags;
+	u32 bitmap;
+	u8 cr;
 
 	spin_lock_irqsave(&adapter->int_lock, flags);
 	sdio_ireg = adapter->int_status;
@@ -1184,10 +1295,60 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
 	if (!sdio_ireg)
 		return ret;
 
+	/* Following interrupt is only for SDIO new mode */
+	if (sdio_ireg & DN_LD_CMD_PORT_HOST_INT_STATUS && adapter->cmd_sent)
+		adapter->cmd_sent = false;
+
+	/* Following interrupt is only for SDIO new mode */
+	if (sdio_ireg & UP_LD_CMD_PORT_HOST_INT_STATUS) {
+		u32 pkt_type;
+
+		/* read the len of control packet */
+		rx_len = card->mp_regs[CMD_RD_LEN_1] << 8;
+		rx_len |= (u16) card->mp_regs[CMD_RD_LEN_0];
+		rx_blocks = DIV_ROUND_UP(rx_len, MWIFIEX_SDIO_BLOCK_SIZE);
+		if (rx_len <= INTF_HEADER_LEN ||
+		    (rx_blocks * MWIFIEX_SDIO_BLOCK_SIZE) >
+		     MWIFIEX_RX_DATA_BUF_SIZE)
+			return -1;
+		rx_len = (u16) (rx_blocks * MWIFIEX_SDIO_BLOCK_SIZE);
+
+		skb = dev_alloc_skb(rx_len);
+		if (!skb)
+			return -1;
+
+		skb_put(skb, rx_len);
+
+		if (mwifiex_sdio_card_to_host(adapter, &pkt_type, skb->data,
+					      skb->len, adapter->ioport |
+							CMD_PORT_SLCT)) {
+			dev_err(adapter->dev,
+				"%s: failed to card_to_host", __func__);
+			dev_kfree_skb_any(skb);
+			goto term_cmd;
+		}
+
+		if ((pkt_type != MWIFIEX_TYPE_CMD) &&
+		    (pkt_type != MWIFIEX_TYPE_EVENT))
+			dev_err(adapter->dev,
+				"%s:Received wrong packet on cmd port",
+				__func__);
+
+		mwifiex_decode_rx_packet(adapter, skb, pkt_type);
+	}
+
 	if (sdio_ireg & DN_LD_HOST_INT_STATUS) {
-		card->mp_wr_bitmap = ((u16) card->mp_regs[WR_BITMAP_U]) << 8;
-		card->mp_wr_bitmap |= (u16) card->mp_regs[WR_BITMAP_L];
-		dev_dbg(adapter->dev, "int: DNLD: wr_bitmap=0x%04x\n",
+		bitmap = (u32) card->mp_regs[reg->wr_bitmap_l];
+		bitmap |= ((u32) card->mp_regs[reg->wr_bitmap_u]) << 8;
+		if (card->supports_sdio_new_mode) {
+			bitmap |=
+				((u32) card->mp_regs[reg->wr_bitmap_1l]) << 16;
+			bitmap |=
+				((u32) card->mp_regs[reg->wr_bitmap_1u]) << 24;
+		}
+		card->mp_wr_bitmap = bitmap;
+
+		dev_dbg(adapter->dev, "int: DNLD: wr_bitmap=0x%x\n",
 			card->mp_wr_bitmap);
 		if (adapter->data_sent &&
 		    (card->mp_wr_bitmap & card->mp_data_port_mask)) {
@@ -1200,11 +1361,11 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
 	/* As firmware will not generate download ready interrupt if the port
 	   updated is command port only, cmd_sent should be done for any SDIO
 	   interrupt. */
-	if (adapter->cmd_sent) {
+	if (card->has_control_mask && adapter->cmd_sent) {
 		/* Check if firmware has attach buffer at command port and
 		   update just that in wr_bit_map. */
 		card->mp_wr_bitmap |=
-			(u16) card->mp_regs[WR_BITMAP_L] & CTRL_PORT_MASK;
+			(u32) card->mp_regs[reg->wr_bitmap_l] & CTRL_PORT_MASK;
 		if (card->mp_wr_bitmap & CTRL_PORT_MASK)
 			adapter->cmd_sent = false;
 	}
@@ -1212,9 +1373,16 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
 	dev_dbg(adapter->dev, "info: cmd_sent=%d data_sent=%d\n",
 		adapter->cmd_sent, adapter->data_sent);
 	if (sdio_ireg & UP_LD_HOST_INT_STATUS) {
-		card->mp_rd_bitmap = ((u16) card->mp_regs[RD_BITMAP_U]) << 8;
-		card->mp_rd_bitmap |= (u16) card->mp_regs[RD_BITMAP_L];
-		dev_dbg(adapter->dev, "int: UPLD: rd_bitmap=0x%04x\n",
+		bitmap = (u32) card->mp_regs[reg->rd_bitmap_l];
+		bitmap |= ((u32) card->mp_regs[reg->rd_bitmap_u]) << 8;
+		if (card->supports_sdio_new_mode) {
+			bitmap |=
+				((u32) card->mp_regs[reg->rd_bitmap_1l]) << 16;
+			bitmap |=
+				((u32) card->mp_regs[reg->rd_bitmap_1u]) << 24;
+		}
+		card->mp_rd_bitmap = bitmap;
+		dev_dbg(adapter->dev, "int: UPLD: rd_bitmap=0x%x\n",
 			card->mp_rd_bitmap);
 
 		while (true) {
@@ -1224,8 +1392,8 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
 					"info: no more rd_port available\n");
 				break;
 			}
-			len_reg_l = RD_LEN_P0_L + (port << 1);
-			len_reg_u = RD_LEN_P0_U + (port << 1);
+			len_reg_l = reg->rd_len_p0_l + (port << 1);
+			len_reg_u = reg->rd_len_p0_u + (port << 1);
 			rx_len = ((u16) card->mp_regs[len_reg_u]) << 8;
 			rx_len |= (u16) card->mp_regs[len_reg_l];
 			dev_dbg(adapter->dev, "info: RX: port=%d rx_len=%u\n",
@@ -1257,37 +1425,33 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
 
 			if (mwifiex_sdio_card_to_host_mp_aggr(adapter, skb,
 							      port)) {
-				u32 cr = 0;
-
 				dev_err(adapter->dev, "card_to_host_mpa failed:"
 					" int status=%#x\n", sdio_ireg);
-				if (mwifiex_read_reg(adapter,
-						     CONFIGURATION_REG, &cr))
-					dev_err(adapter->dev,
-						"read CFG reg failed\n");
-
-				dev_dbg(adapter->dev,
-					"info: CFG reg val = %d\n", cr);
-				if (mwifiex_write_reg(adapter,
-						      CONFIGURATION_REG,
-						      (cr | 0x04)))
-					dev_err(adapter->dev,
-						"write CFG reg failed\n");
-
-				dev_dbg(adapter->dev, "info: write success\n");
-				if (mwifiex_read_reg(adapter,
-						     CONFIGURATION_REG, &cr))
-					dev_err(adapter->dev,
-						"read CFG reg failed\n");
-
-				dev_dbg(adapter->dev,
-					"info: CFG reg val =%x\n", cr);
-				return -1;
+				goto term_cmd;
 			}
 		}
 	}
 
 	return 0;
+
+term_cmd:
+	/* terminate cmd */
+	if (mwifiex_read_reg(adapter, CONFIGURATION_REG, &cr))
+		dev_err(adapter->dev, "read CFG reg failed\n");
+	else
+		dev_dbg(adapter->dev, "info: CFG reg val = %d\n", cr);
+
+	if (mwifiex_write_reg(adapter, CONFIGURATION_REG, (cr | 0x04)))
+		dev_err(adapter->dev, "write CFG reg failed\n");
+	else
+		dev_dbg(adapter->dev, "info: write success\n");
+
+	if (mwifiex_read_reg(adapter, CONFIGURATION_REG, &cr))
+		dev_err(adapter->dev, "read CFG reg failed\n");
+	else
+		dev_dbg(adapter->dev, "info: CFG reg val =%x\n", cr);
+
+	return -1;
 }
 
 /*
@@ -1305,7 +1469,7 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter)
  * and return.
  */
 static int mwifiex_host_to_card_mp_aggr(struct mwifiex_adapter *adapter,
-					u8 *payload, u32 pkt_len, u8 port,
+					u8 *payload, u32 pkt_len, u32 port,
 					u32 next_pkt_len)
 {
 	struct sdio_mmc_card *card = adapter->card;
@@ -1314,8 +1478,11 @@ static int mwifiex_host_to_card_mp_aggr(struct mwifiex_adapter *adapter,
 	s32 f_send_cur_buf = 0;
 	s32 f_precopy_cur_buf = 0;
 	s32 f_postcopy_cur_buf = 0;
+	u32 mport;
 
-	if ((!card->mpa_tx.enabled) || (port == CTRL_PORT)) {
+	if (!card->mpa_tx.enabled ||
+	    (card->has_control_mask && (port == CTRL_PORT)) ||
+	    (card->supports_sdio_new_mode && (port == CMD_PORT_SLCT))) {
 		dev_dbg(adapter->dev, "info: %s: tx aggregation disabled\n",
 			__func__);
 
@@ -1329,7 +1496,7 @@ static int mwifiex_host_to_card_mp_aggr(struct mwifiex_adapter *adapter,
 			__func__);
 
 		if (MP_TX_AGGR_IN_PROGRESS(card)) {
-			if (!MP_TX_AGGR_PORT_LIMIT_REACHED(card) &&
+			if (!mp_tx_aggr_port_limit_reached(card) &&
 			    MP_TX_AGGR_BUF_HAS_ROOM(card, pkt_len)) {
 				f_precopy_cur_buf = 1;
 
@@ -1342,7 +1509,7 @@ static int mwifiex_host_to_card_mp_aggr(struct mwifiex_adapter *adapter,
 				/* No room in Aggr buf, send it */
 				f_send_aggr_buf = 1;
 
-				if (MP_TX_AGGR_PORT_LIMIT_REACHED(card) ||
+				if (mp_tx_aggr_port_limit_reached(card) ||
 				    !(card->mp_wr_bitmap &
 				      (1 << card->curr_wr_port)))
 					f_send_cur_buf = 1;
@@ -1381,7 +1548,7 @@ static int mwifiex_host_to_card_mp_aggr(struct mwifiex_adapter *adapter,
 		MP_TX_AGGR_BUF_PUT(card, payload, pkt_len, port);
 
 		if (MP_TX_AGGR_PKT_LIMIT_REACHED(card) ||
-		    MP_TX_AGGR_PORT_LIMIT_REACHED(card))
+		    mp_tx_aggr_port_limit_reached(card))
 			/* No more pkts allowed in Aggr buf, send it */
 			f_send_aggr_buf = 1;
 	}
@@ -1390,11 +1557,28 @@ static int mwifiex_host_to_card_mp_aggr(struct mwifiex_adapter *adapter,
 		dev_dbg(adapter->dev, "data: %s: send aggr buffer: %d %d\n",
 			__func__,
 				card->mpa_tx.start_port, card->mpa_tx.ports);
+		if (card->supports_sdio_new_mode) {
+			u32 port_count;
+			int i;
+
+			for (i = 0, port_count = 0; i < card->max_ports; i++)
+				if (card->mpa_tx.ports & BIT(i))
+					port_count++;
+
+			/* Writing data from "start_port + 0" to "start_port +
+			 * port_count -1", so decrease the count by 1
+			 */
+			port_count--;
+			mport = (adapter->ioport | SDIO_MPA_ADDR_BASE |
+				 (port_count << 8)) + card->mpa_tx.start_port;
+		} else {
+			mport = (adapter->ioport | SDIO_MPA_ADDR_BASE |
+				 (card->mpa_tx.ports << 4)) +
+				 card->mpa_tx.start_port;
+		}
+
 		ret = mwifiex_write_data_to_card(adapter, card->mpa_tx.buf,
-						 card->mpa_tx.buf_len,
-						 (adapter->ioport | 0x1000 |
-						 (card->mpa_tx.ports << 4)) +
-						  card->mpa_tx.start_port);
+						 card->mpa_tx.buf_len, mport);
 
 		MP_TX_AGGR_BUF_RESET(card);
 	}
@@ -1434,7 +1618,7 @@ static int mwifiex_sdio_host_to_card(struct mwifiex_adapter *adapter,
 	int ret;
 	u32 buf_block_len;
 	u32 blk_size;
-	u8 port = CTRL_PORT;
+	u32 port = CTRL_PORT;
 	u8 *payload = (u8 *)skb->data;
 	u32 pkt_len = skb->len;
 
@@ -1465,6 +1649,9 @@ static int mwifiex_sdio_host_to_card(struct mwifiex_adapter *adapter,
 		    pkt_len > MWIFIEX_UPLD_SIZE)
 			dev_err(adapter->dev, "%s: payload=%p, nb=%d\n",
 				__func__, payload, pkt_len);
+
+		if (card->supports_sdio_new_mode)
+			port = CMD_PORT_SLCT;
 	}
 
 	/* Transfer data to card */
@@ -1586,18 +1773,7 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
 
 	adapter->dev = &func->dev;
 
-	switch (func->device) {
-	case SDIO_DEVICE_ID_MARVELL_8786:
-		strcpy(adapter->fw_name, SD8786_DEFAULT_FW_NAME);
-		break;
-	case SDIO_DEVICE_ID_MARVELL_8797:
-		strcpy(adapter->fw_name, SD8797_DEFAULT_FW_NAME);
-		break;
-	case SDIO_DEVICE_ID_MARVELL_8787:
-	default:
-		strcpy(adapter->fw_name, SD8787_DEFAULT_FW_NAME);
-		break;
-	}
+	strcpy(adapter->fw_name, card->firmware);
 
 	return 0;
 
@@ -1626,8 +1802,9 @@ disable_func:
 static int mwifiex_init_sdio(struct mwifiex_adapter *adapter)
 {
 	struct sdio_mmc_card *card = adapter->card;
+	const struct mwifiex_sdio_card_reg *reg = card->reg;
 	int ret;
-	u32 sdio_ireg;
+	u8 sdio_ireg;
 
 	/*
 	 * Read the HOST_INT_STATUS_REG for ACK the first interrupt got
@@ -1645,30 +1822,35 @@ static int mwifiex_init_sdio(struct mwifiex_adapter *adapter)
 	/* Initialize SDIO variables in card */
 	card->mp_rd_bitmap = 0;
 	card->mp_wr_bitmap = 0;
-	card->curr_rd_port = 1;
-	card->curr_wr_port = 1;
+	card->curr_rd_port = reg->start_rd_port;
+	card->curr_wr_port = reg->start_wr_port;
 
-	card->mp_data_port_mask = DATA_PORT_MASK;
+	card->mp_data_port_mask = reg->data_port_mask;
 
 	card->mpa_tx.buf_len = 0;
 	card->mpa_tx.pkt_cnt = 0;
 	card->mpa_tx.start_port = 0;
 
 	card->mpa_tx.enabled = 1;
-	card->mpa_tx.pkt_aggr_limit = SDIO_MP_AGGR_DEF_PKT_LIMIT;
+	card->mpa_tx.pkt_aggr_limit = card->mp_agg_pkt_limit;
 
 	card->mpa_rx.buf_len = 0;
 	card->mpa_rx.pkt_cnt = 0;
 	card->mpa_rx.start_port = 0;
 
 	card->mpa_rx.enabled = 1;
-	card->mpa_rx.pkt_aggr_limit = SDIO_MP_AGGR_DEF_PKT_LIMIT;
+	card->mpa_rx.pkt_aggr_limit = card->mp_agg_pkt_limit;
 
 	/* Allocate buffers for SDIO MP-A */
-	card->mp_regs = kzalloc(MAX_MP_REGS, GFP_KERNEL);
+	card->mp_regs = kzalloc(reg->max_mp_regs, GFP_KERNEL);
 	if (!card->mp_regs)
 		return -ENOMEM;
 
+	/* Allocate skb pointer buffers */
+	card->mpa_rx.skb_arr = kzalloc((sizeof(void *)) *
+				       card->mp_agg_pkt_limit, GFP_KERNEL);
+	card->mpa_rx.len_arr = kzalloc(sizeof(*card->mpa_rx.len_arr) *
+				       card->mp_agg_pkt_limit, GFP_KERNEL);
 	ret = mwifiex_alloc_sdio_mpa_buffers(adapter,
 					     SDIO_MP_TX_AGGR_DEF_BUF_SIZE,
 					     SDIO_MP_RX_AGGR_DEF_BUF_SIZE);
@@ -1705,6 +1887,8 @@ static void mwifiex_cleanup_sdio(struct mwifiex_adapter *adapter)
 	struct sdio_mmc_card *card = adapter->card;
 
 	kfree(card->mp_regs);
+	kfree(card->mpa_rx.skb_arr);
+	kfree(card->mpa_rx.len_arr);
 	kfree(card->mpa_tx.buf);
 	kfree(card->mpa_rx.buf);
 }
@@ -1716,16 +1900,20 @@ static void
 mwifiex_update_mp_end_port(struct mwifiex_adapter *adapter, u16 port)
 {
 	struct sdio_mmc_card *card = adapter->card;
+	const struct mwifiex_sdio_card_reg *reg = card->reg;
 	int i;
 
 	card->mp_end_port = port;
 
-	card->mp_data_port_mask = DATA_PORT_MASK;
+	card->mp_data_port_mask = reg->data_port_mask;
 
-	for (i = 1; i <= MAX_PORT - card->mp_end_port; i++)
-		card->mp_data_port_mask &= ~(1 << (MAX_PORT - i));
+	if (reg->start_wr_port) {
+		for (i = 1; i <= card->max_ports - card->mp_end_port; i++)
+			card->mp_data_port_mask &=
+					~(1 << (card->max_ports - i));
+	}
 
-	card->curr_wr_port = 1;
+	card->curr_wr_port = reg->start_wr_port;
 
 	dev_dbg(adapter->dev, "cmd: mp_end_port %d, data port mask 0x%x\n",
 		port, card->mp_data_port_mask);
@@ -1831,3 +2019,4 @@ MODULE_LICENSE("GPL v2");
 MODULE_FIRMWARE(SD8786_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(SD8787_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(SD8797_DEFAULT_FW_NAME);
+MODULE_FIRMWARE(SD8897_DEFAULT_FW_NAME);
diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h
index 8cc5468654b..6d51dfdd825 100644
--- a/drivers/net/wireless/mwifiex/sdio.h
+++ b/drivers/net/wireless/mwifiex/sdio.h
@@ -32,30 +32,37 @@
 #define SD8786_DEFAULT_FW_NAME "mrvl/sd8786_uapsta.bin"
 #define SD8787_DEFAULT_FW_NAME "mrvl/sd8787_uapsta.bin"
 #define SD8797_DEFAULT_FW_NAME "mrvl/sd8797_uapsta.bin"
+#define SD8897_DEFAULT_FW_NAME "mrvl/sd8897_uapsta.bin"
 
 #define BLOCK_MODE	1
 #define BYTE_MODE	0
 
 #define REG_PORT			0
-#define RD_BITMAP_L			0x04
-#define RD_BITMAP_U			0x05
-#define WR_BITMAP_L			0x06
-#define WR_BITMAP_U			0x07
-#define RD_LEN_P0_L			0x08
-#define RD_LEN_P0_U			0x09
 
 #define MWIFIEX_SDIO_IO_PORT_MASK		0xfffff
 
 #define MWIFIEX_SDIO_BYTE_MODE_MASK	0x80000000
 
+#define SDIO_MPA_ADDR_BASE		0x1000
 #define CTRL_PORT			0
 #define CTRL_PORT_MASK			0x0001
-#define DATA_PORT_MASK			0xfffe
 
-#define MAX_MP_REGS			64
-#define MAX_PORT			16
-
-#define SDIO_MP_AGGR_DEF_PKT_LIMIT	8
+#define CMD_PORT_UPLD_INT_MASK		(0x1U<<6)
+#define CMD_PORT_DNLD_INT_MASK		(0x1U<<7)
+#define HOST_TERM_CMD53			(0x1U << 2)
+#define REG_PORT			0
+#define MEM_PORT			0x10000
+#define CMD_RD_LEN_0			0xB4
+#define CMD_RD_LEN_1			0xB5
+#define CARD_CONFIG_2_1_REG             0xCD
+#define CMD53_NEW_MODE			(0x1U << 0)
+#define CMD_CONFIG_0			0xB8
+#define CMD_PORT_RD_LEN_EN		(0x1U << 2)
+#define CMD_CONFIG_1			0xB9
+#define CMD_PORT_AUTO_EN		(0x1U << 0)
+#define CMD_PORT_SLCT			0x8000
+#define UP_LD_CMD_PORT_HOST_INT_STATUS	(0x40U)
+#define DN_LD_CMD_PORT_HOST_INT_STATUS	(0x80U)
 
 #define SDIO_MP_TX_AGGR_DEF_BUF_SIZE        (8192)	/* 8K */
 
@@ -75,14 +82,8 @@
 
 /* Host Control Registers : Configuration */
 #define CONFIGURATION_REG		0x00
-/* Host Control Registers : Host without Command 53 finish host*/
-#define HOST_TO_CARD_EVENT       (0x1U << 3)
-/* Host Control Registers : Host without Command 53 finish host */
-#define HOST_WO_CMD53_FINISH_HOST	(0x1U << 2)
 /* Host Control Registers : Host power up */
 #define HOST_POWER_UP			(0x1U << 1)
-/* Host Control Registers : Host power down */
-#define HOST_POWER_DOWN			(0x1U << 0)
 
 /* Host Control Registers : Host interrupt mask */
 #define HOST_INT_MASK_REG		0x02
@@ -90,8 +91,7 @@
 #define UP_LD_HOST_INT_MASK		(0x1U)
 /* Host Control Registers : Download host interrupt mask */
 #define DN_LD_HOST_INT_MASK		(0x2U)
-/* Enable Host interrupt mask */
-#define HOST_INT_ENABLE	(UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK)
+
 /* Disable Host interrupt mask */
 #define	HOST_INT_DISABLE		0xff
 
@@ -104,74 +104,15 @@
 
 /* Host Control Registers : Host interrupt RSR */
 #define HOST_INT_RSR_REG		0x01
-/* Host Control Registers : Upload host interrupt RSR */
-#define UP_LD_HOST_INT_RSR		(0x1U)
-#define SDIO_INT_MASK			0x3F
 
 /* Host Control Registers : Host interrupt status */
 #define HOST_INT_STATUS_REG		0x28
-/* Host Control Registers : Upload CRC error */
-#define UP_LD_CRC_ERR			(0x1U << 2)
-/* Host Control Registers : Upload restart */
-#define UP_LD_RESTART                   (0x1U << 1)
-/* Host Control Registers : Download restart */
-#define DN_LD_RESTART                   (0x1U << 0)
-
-/* Card Control Registers : Card status register */
-#define CARD_STATUS_REG                 0x30
+
 /* Card Control Registers : Card I/O ready */
 #define CARD_IO_READY                   (0x1U << 3)
-/* Card Control Registers : CIS card ready */
-#define CIS_CARD_RDY                    (0x1U << 2)
-/* Card Control Registers : Upload card ready */
-#define UP_LD_CARD_RDY                  (0x1U << 1)
 /* Card Control Registers : Download card ready */
 #define DN_LD_CARD_RDY                  (0x1U << 0)
 
-/* Card Control Registers : Host interrupt mask register */
-#define HOST_INTERRUPT_MASK_REG         0x34
-/* Card Control Registers : Host power interrupt mask */
-#define HOST_POWER_INT_MASK             (0x1U << 3)
-/* Card Control Registers : Abort card interrupt mask */
-#define ABORT_CARD_INT_MASK             (0x1U << 2)
-/* Card Control Registers : Upload card interrupt mask */
-#define UP_LD_CARD_INT_MASK             (0x1U << 1)
-/* Card Control Registers : Download card interrupt mask */
-#define DN_LD_CARD_INT_MASK             (0x1U << 0)
-
-/* Card Control Registers : Card interrupt status register */
-#define CARD_INTERRUPT_STATUS_REG       0x38
-/* Card Control Registers : Power up interrupt */
-#define POWER_UP_INT                    (0x1U << 4)
-/* Card Control Registers : Power down interrupt */
-#define POWER_DOWN_INT                  (0x1U << 3)
-
-/* Card Control Registers : Card interrupt RSR register */
-#define CARD_INTERRUPT_RSR_REG          0x3c
-/* Card Control Registers : Power up RSR */
-#define POWER_UP_RSR                    (0x1U << 4)
-/* Card Control Registers : Power down RSR */
-#define POWER_DOWN_RSR                  (0x1U << 3)
-
-/* Card Control Registers : Miscellaneous Configuration Register */
-#define CARD_MISC_CFG_REG               0x6C
-
-/* Host F1 read base 0 */
-#define HOST_F1_RD_BASE_0		0x0040
-/* Host F1 read base 1 */
-#define HOST_F1_RD_BASE_1		0x0041
-/* Host F1 card ready */
-#define HOST_F1_CARD_RDY		0x0020
-
-/* Firmware status 0 register */
-#define CARD_FW_STATUS0_REG		0x60
-/* Firmware status 1 register */
-#define CARD_FW_STATUS1_REG		0x61
-/* Rx length register */
-#define CARD_RX_LEN_REG			0x62
-/* Rx unit register */
-#define CARD_RX_UNIT_REG		0x63
-
 /* Max retry number of CMD53 write */
 #define MAX_WRITE_IOMEM_RETRY		2
 
@@ -192,7 +133,8 @@
 	if (a->mpa_tx.start_port <= port)				\
 		a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt));		\
 	else								\
-		a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt+1+(MAX_PORT -	\
+		a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt+1+		\
+						(a->max_ports -	\
 						a->mp_end_port)));	\
 	a->mpa_tx.pkt_cnt++;						\
 } while (0)
@@ -201,12 +143,6 @@
 #define MP_TX_AGGR_PKT_LIMIT_REACHED(a)					\
 			(a->mpa_tx.pkt_cnt == a->mpa_tx.pkt_aggr_limit)
 
-/* SDIO Tx aggregation port limit ? */
-#define MP_TX_AGGR_PORT_LIMIT_REACHED(a) ((a->curr_wr_port <		\
-			a->mpa_tx.start_port) && (((MAX_PORT -		\
-			a->mpa_tx.start_port) + a->curr_wr_port) >=	\
-				SDIO_MP_AGGR_DEF_PKT_LIMIT))
-
 /* Reset SDIO Tx aggregation buffer parameters */
 #define MP_TX_AGGR_BUF_RESET(a) do {					\
 	a->mpa_tx.pkt_cnt = 0;						\
@@ -219,12 +155,6 @@
 #define MP_RX_AGGR_PKT_LIMIT_REACHED(a)					\
 			(a->mpa_rx.pkt_cnt == a->mpa_rx.pkt_aggr_limit)
 
-/* SDIO Tx aggregation port limit ? */
-#define MP_RX_AGGR_PORT_LIMIT_REACHED(a) ((a->curr_rd_port <		\
-			a->mpa_rx.start_port) && (((MAX_PORT -		\
-			a->mpa_rx.start_port) + a->curr_rd_port) >=	\
-			SDIO_MP_AGGR_DEF_PKT_LIMIT))
-
 /* SDIO Rx aggregation in progress ? */
 #define MP_RX_AGGR_IN_PROGRESS(a) (a->mpa_rx.pkt_cnt > 0)
 
@@ -232,20 +162,6 @@
 #define MP_RX_AGGR_BUF_HAS_ROOM(a, rx_len)				\
 			((a->mpa_rx.buf_len+rx_len) <= a->mpa_rx.buf_size)
 
-/* Prepare to copy current packet from card to SDIO Rx aggregation buffer */
-#define MP_RX_AGGR_SETUP(a, skb, port) do {				\
-	a->mpa_rx.buf_len += skb->len;					\
-	if (!a->mpa_rx.pkt_cnt)						\
-		a->mpa_rx.start_port = port;				\
-	if (a->mpa_rx.start_port <= port)				\
-		a->mpa_rx.ports |= (1<<(a->mpa_rx.pkt_cnt));		\
-	else								\
-		a->mpa_rx.ports |= (1<<(a->mpa_rx.pkt_cnt+1));		\
-	a->mpa_rx.skb_arr[a->mpa_rx.pkt_cnt] = skb;			\
-	a->mpa_rx.len_arr[a->mpa_rx.pkt_cnt] = skb->len;		\
-	a->mpa_rx.pkt_cnt++;						\
-} while (0)
-
 /* Reset SDIO Rx aggregation buffer parameters */
 #define MP_RX_AGGR_BUF_RESET(a) do {					\
 	a->mpa_rx.pkt_cnt = 0;						\
@@ -254,14 +170,13 @@
 	a->mpa_rx.start_port = 0;					\
 } while (0)
 
-
 /* data structure for SDIO MPA TX */
 struct mwifiex_sdio_mpa_tx {
 	/* multiport tx aggregation buffer pointer */
 	u8 *buf;
 	u32 buf_len;
 	u32 pkt_cnt;
-	u16 ports;
+	u32 ports;
 	u16 start_port;
 	u8 enabled;
 	u32 buf_size;
@@ -272,11 +187,11 @@ struct mwifiex_sdio_mpa_rx {
 	u8 *buf;
 	u32 buf_len;
 	u32 pkt_cnt;
-	u16 ports;
+	u32 ports;
 	u16 start_port;
 
-	struct sk_buff *skb_arr[SDIO_MP_AGGR_DEF_PKT_LIMIT];
-	u32 len_arr[SDIO_MP_AGGR_DEF_PKT_LIMIT];
+	struct sk_buff **skb_arr;
+	u32 *len_arr;
 
 	u8 enabled;
 	u32 buf_size;
@@ -286,15 +201,47 @@ struct mwifiex_sdio_mpa_rx {
 int mwifiex_bus_register(void);
 void mwifiex_bus_unregister(void);
 
+struct mwifiex_sdio_card_reg {
+	u8 start_rd_port;
+	u8 start_wr_port;
+	u8 base_0_reg;
+	u8 base_1_reg;
+	u8 poll_reg;
+	u8 host_int_enable;
+	u8 status_reg_0;
+	u8 status_reg_1;
+	u8 sdio_int_mask;
+	u32 data_port_mask;
+	u8 max_mp_regs;
+	u8 rd_bitmap_l;
+	u8 rd_bitmap_u;
+	u8 rd_bitmap_1l;
+	u8 rd_bitmap_1u;
+	u8 wr_bitmap_l;
+	u8 wr_bitmap_u;
+	u8 wr_bitmap_1l;
+	u8 wr_bitmap_1u;
+	u8 rd_len_p0_l;
+	u8 rd_len_p0_u;
+	u8 card_misc_cfg_reg;
+};
+
 struct sdio_mmc_card {
 	struct sdio_func *func;
 	struct mwifiex_adapter *adapter;
 
-	u16 mp_rd_bitmap;
-	u16 mp_wr_bitmap;
+	const char *firmware;
+	const struct mwifiex_sdio_card_reg *reg;
+	u8 max_ports;
+	u8 mp_agg_pkt_limit;
+	bool supports_sdio_new_mode;
+	bool has_control_mask;
+
+	u32 mp_rd_bitmap;
+	u32 mp_wr_bitmap;
 
 	u16 mp_end_port;
-	u16 mp_data_port_mask;
+	u32 mp_data_port_mask;
 
 	u8 curr_rd_port;
 	u8 curr_wr_port;
@@ -305,6 +252,98 @@ struct sdio_mmc_card {
 	struct mwifiex_sdio_mpa_rx mpa_rx;
 };
 
+struct mwifiex_sdio_device {
+	const char *firmware;
+	const struct mwifiex_sdio_card_reg *reg;
+	u8 max_ports;
+	u8 mp_agg_pkt_limit;
+	bool supports_sdio_new_mode;
+	bool has_control_mask;
+};
+
+static const struct mwifiex_sdio_card_reg mwifiex_reg_sd87xx = {
+	.start_rd_port = 1,
+	.start_wr_port = 1,
+	.base_0_reg = 0x0040,
+	.base_1_reg = 0x0041,
+	.poll_reg = 0x30,
+	.host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK,
+	.status_reg_0 = 0x60,
+	.status_reg_1 = 0x61,
+	.sdio_int_mask = 0x3f,
+	.data_port_mask = 0x0000fffe,
+	.max_mp_regs = 64,
+	.rd_bitmap_l = 0x04,
+	.rd_bitmap_u = 0x05,
+	.wr_bitmap_l = 0x06,
+	.wr_bitmap_u = 0x07,
+	.rd_len_p0_l = 0x08,
+	.rd_len_p0_u = 0x09,
+	.card_misc_cfg_reg = 0x6c,
+};
+
+static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8897 = {
+	.start_rd_port = 0,
+	.start_wr_port = 0,
+	.base_0_reg = 0x60,
+	.base_1_reg = 0x61,
+	.poll_reg = 0x50,
+	.host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK |
+			CMD_PORT_UPLD_INT_MASK | CMD_PORT_DNLD_INT_MASK,
+	.status_reg_0 = 0xc0,
+	.status_reg_1 = 0xc1,
+	.sdio_int_mask = 0xff,
+	.data_port_mask = 0xffffffff,
+	.max_mp_regs = 184,
+	.rd_bitmap_l = 0x04,
+	.rd_bitmap_u = 0x05,
+	.rd_bitmap_1l = 0x06,
+	.rd_bitmap_1u = 0x07,
+	.wr_bitmap_l = 0x08,
+	.wr_bitmap_u = 0x09,
+	.wr_bitmap_1l = 0x0a,
+	.wr_bitmap_1u = 0x0b,
+	.rd_len_p0_l = 0x0c,
+	.rd_len_p0_u = 0x0d,
+	.card_misc_cfg_reg = 0xcc,
+};
+
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8786 = {
+	.firmware = SD8786_DEFAULT_FW_NAME,
+	.reg = &mwifiex_reg_sd87xx,
+	.max_ports = 16,
+	.mp_agg_pkt_limit = 8,
+	.supports_sdio_new_mode = false,
+	.has_control_mask = true,
+};
+
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8787 = {
+	.firmware = SD8787_DEFAULT_FW_NAME,
+	.reg = &mwifiex_reg_sd87xx,
+	.max_ports = 16,
+	.mp_agg_pkt_limit = 8,
+	.supports_sdio_new_mode = false,
+	.has_control_mask = true,
+};
+
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8797 = {
+	.firmware = SD8797_DEFAULT_FW_NAME,
+	.reg = &mwifiex_reg_sd87xx,
+	.max_ports = 16,
+	.mp_agg_pkt_limit = 8,
+	.supports_sdio_new_mode = false,
+	.has_control_mask = true,
+};
+
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8897 = {
+	.firmware = SD8897_DEFAULT_FW_NAME,
+	.reg = &mwifiex_reg_sd8897,
+	.max_ports = 32,
+	.mp_agg_pkt_limit = 16,
+	.supports_sdio_new_mode = true,
+	.has_control_mask = false,
+};
+
 /*
  * .cmdrsp_complete handler
  */
@@ -325,4 +364,77 @@ static inline int mwifiex_sdio_event_complete(struct mwifiex_adapter *adapter,
 	return 0;
 }
 
+static inline bool
+mp_rx_aggr_port_limit_reached(struct sdio_mmc_card *card)
+{
+	u8 tmp;
+
+	if (card->curr_rd_port < card->mpa_rx.start_port) {
+		if (card->supports_sdio_new_mode)
+			tmp = card->mp_end_port >> 1;
+		else
+			tmp = card->mp_agg_pkt_limit;
+
+		if (((card->max_ports - card->mpa_rx.start_port) +
+		    card->curr_rd_port) >= tmp)
+			return true;
+	}
+
+	if (!card->supports_sdio_new_mode)
+		return false;
+
+	if ((card->curr_rd_port - card->mpa_rx.start_port) >=
+	    (card->mp_end_port >> 1))
+		return true;
+
+	return false;
+}
+
+static inline bool
+mp_tx_aggr_port_limit_reached(struct sdio_mmc_card *card)
+{
+	u16 tmp;
+
+	if (card->curr_wr_port < card->mpa_tx.start_port) {
+		if (card->supports_sdio_new_mode)
+			tmp = card->mp_end_port >> 1;
+		else
+			tmp = card->mp_agg_pkt_limit;
+
+		if (((card->max_ports - card->mpa_tx.start_port) +
+		    card->curr_wr_port) >= tmp)
+			return true;
+	}
+
+	if (!card->supports_sdio_new_mode)
+		return false;
+
+	if ((card->curr_wr_port - card->mpa_tx.start_port) >=
+	    (card->mp_end_port >> 1))
+		return true;
+
+	return false;
+}
+
+/* Prepare to copy current packet from card to SDIO Rx aggregation buffer */
+static inline void mp_rx_aggr_setup(struct sdio_mmc_card *card,
+				    struct sk_buff *skb, u8 port)
+{
+	card->mpa_rx.buf_len += skb->len;
+
+	if (!card->mpa_rx.pkt_cnt)
+		card->mpa_rx.start_port = port;
+
+	if (card->supports_sdio_new_mode) {
+		card->mpa_rx.ports |= (1 << port);
+	} else {
+		if (card->mpa_rx.start_port <= port)
+			card->mpa_rx.ports |= 1 << (card->mpa_rx.pkt_cnt);
+		else
+			card->mpa_rx.ports |= 1 << (card->mpa_rx.pkt_cnt + 1);
+	}
+	card->mpa_rx.skb_arr[card->mpa_rx.pkt_cnt] = skb;
+	card->mpa_rx.len_arr[card->mpa_rx.pkt_cnt] = skb->len;
+	card->mpa_rx.pkt_cnt++;
+}
 #endif /* _MWIFIEX_SDIO_H */
diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c
index b193e25977d..8ece4858064 100644
--- a/drivers/net/wireless/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/mwifiex/sta_cmd.c
@@ -1134,6 +1134,55 @@ mwifiex_cmd_mef_cfg(struct mwifiex_private *priv,
 	return 0;
 }
 
+/* This function parse cal data from ASCII to hex */
+static u32 mwifiex_parse_cal_cfg(u8 *src, size_t len, u8 *dst)
+{
+	u8 *s = src, *d = dst;
+
+	while (s - src < len) {
+		if (*s && (isspace(*s) || *s == '\t')) {
+			s++;
+			continue;
+		}
+		if (isxdigit(*s)) {
+			*d++ = simple_strtol(s, NULL, 16);
+			s += 2;
+		} else {
+			s++;
+		}
+	}
+
+	return d - dst;
+}
+
+/* This function prepares command of set_cfg_data. */
+static int mwifiex_cmd_cfg_data(struct mwifiex_private *priv,
+				struct host_cmd_ds_command *cmd,
+				u16 cmd_action)
+{
+	struct host_cmd_ds_802_11_cfg_data *cfg_data = &cmd->params.cfg_data;
+	struct mwifiex_adapter *adapter = priv->adapter;
+	u32 len, cal_data_offset;
+	u8 *tmp_cmd = (u8 *)cmd;
+
+	cal_data_offset = S_DS_GEN + sizeof(*cfg_data);
+	if ((adapter->cal_data->data) && (adapter->cal_data->size > 0))
+		len = mwifiex_parse_cal_cfg((u8 *)adapter->cal_data->data,
+					    adapter->cal_data->size,
+					    (u8 *)(tmp_cmd + cal_data_offset));
+	else
+		return -1;
+
+	cfg_data->action = cpu_to_le16(cmd_action);
+	cfg_data->type = cpu_to_le16(CFG_DATA_TYPE_CAL);
+	cfg_data->data_len = cpu_to_le16(len);
+
+	cmd->command = cpu_to_le16(HostCmd_CMD_CFG_DATA);
+	cmd->size = cpu_to_le16(S_DS_GEN + sizeof(*cfg_data) + len);
+
+	return 0;
+}
+
 /*
  * This function prepares the commands before sending them to the firmware.
  *
@@ -1152,6 +1201,9 @@ int mwifiex_sta_prepare_cmd(struct mwifiex_private *priv, uint16_t cmd_no,
 	case HostCmd_CMD_GET_HW_SPEC:
 		ret = mwifiex_cmd_get_hw_spec(priv, cmd_ptr);
 		break;
+	case HostCmd_CMD_CFG_DATA:
+		ret = mwifiex_cmd_cfg_data(priv, cmd_ptr, cmd_action);
+		break;
 	case HostCmd_CMD_MAC_CONTROL:
 		ret = mwifiex_cmd_mac_control(priv, cmd_ptr, cmd_action,
 					      data_buf);
@@ -1384,6 +1436,7 @@ int mwifiex_sta_prepare_cmd(struct mwifiex_private *priv, uint16_t cmd_no,
  */
 int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta)
 {
+	struct mwifiex_adapter *adapter = priv->adapter;
 	int ret;
 	u16 enable = true;
 	struct mwifiex_ds_11n_amsdu_aggr_ctrl amsdu_aggr_ctrl;
@@ -1404,6 +1457,15 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta)
 					    HostCmd_ACT_GEN_SET, 0, NULL);
 		if (ret)
 			return -1;
+
+		/* Download calibration data to firmware */
+		if (adapter->cal_data) {
+			ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_CFG_DATA,
+						HostCmd_ACT_GEN_SET, 0, NULL);
+			if (ret)
+				return -1;
+		}
+
 		/* Read MAC address from HW */
 		ret = mwifiex_send_cmd_sync(priv, HostCmd_CMD_GET_HW_SPEC,
 					    HostCmd_ACT_GEN_GET, 0, NULL);
diff --git a/drivers/net/wireless/mwifiex/sta_cmdresp.c b/drivers/net/wireless/mwifiex/sta_cmdresp.c
index 9f990e14966..d85df158cc6 100644
--- a/drivers/net/wireless/mwifiex/sta_cmdresp.c
+++ b/drivers/net/wireless/mwifiex/sta_cmdresp.c
@@ -818,6 +818,18 @@ static int mwifiex_ret_subsc_evt(struct mwifiex_private *priv,
 	return 0;
 }
 
+/* This function handles the command response of set_cfg_data */
+static int mwifiex_ret_cfg_data(struct mwifiex_private *priv,
+				struct host_cmd_ds_command *resp)
+{
+	if (resp->result != HostCmd_RESULT_OK) {
+		dev_err(priv->adapter->dev, "Cal data cmd resp failed\n");
+		return -1;
+	}
+
+	return 0;
+}
+
 /*
  * This function handles the command responses.
  *
@@ -841,6 +853,9 @@ int mwifiex_process_sta_cmdresp(struct mwifiex_private *priv, u16 cmdresp_no,
 	case HostCmd_CMD_GET_HW_SPEC:
 		ret = mwifiex_ret_get_hw_spec(priv, resp);
 		break;
+	case HostCmd_CMD_CFG_DATA:
+		ret = mwifiex_ret_cfg_data(priv, resp);
+		break;
 	case HostCmd_CMD_MAC_CONTROL:
 		break;
 	case HostCmd_CMD_802_11_MAC_ADDRESS:
@@ -978,6 +993,8 @@ int mwifiex_process_sta_cmdresp(struct mwifiex_private *priv, u16 cmdresp_no,
 	case HostCmd_CMD_UAP_BSS_STOP:
 		priv->bss_started = 0;
 		break;
+	case HostCmd_CMD_UAP_STA_DEAUTH:
+		break;
 	case HostCmd_CMD_MEF_CFG:
 		break;
 	default:
diff --git a/drivers/net/wireless/mwifiex/uap_cmd.c b/drivers/net/wireless/mwifiex/uap_cmd.c
index b04b1db2910..2de882dead0 100644
--- a/drivers/net/wireless/mwifiex/uap_cmd.c
+++ b/drivers/net/wireless/mwifiex/uap_cmd.c
@@ -689,6 +689,23 @@ mwifiex_cmd_uap_sys_config(struct host_cmd_ds_command *cmd, u16 cmd_action,
 	return 0;
 }
 
+/* This function prepares AP specific deauth command with mac supplied in
+ * function parameter.
+ */
+static int mwifiex_cmd_uap_sta_deauth(struct mwifiex_private *priv,
+				      struct host_cmd_ds_command *cmd, u8 *mac)
+{
+	struct host_cmd_ds_sta_deauth *sta_deauth = &cmd->params.sta_deauth;
+
+	cmd->command = cpu_to_le16(HostCmd_CMD_UAP_STA_DEAUTH);
+	memcpy(sta_deauth->mac, mac, ETH_ALEN);
+	sta_deauth->reason = cpu_to_le16(WLAN_REASON_DEAUTH_LEAVING);
+
+	cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_sta_deauth) +
+				S_DS_GEN);
+	return 0;
+}
+
 /* This function prepares the AP specific commands before sending them
  * to the firmware.
  * This is a generic function which calls specific command preparation
@@ -710,6 +727,10 @@ int mwifiex_uap_prepare_cmd(struct mwifiex_private *priv, u16 cmd_no,
 		cmd->command = cpu_to_le16(cmd_no);
 		cmd->size = cpu_to_le16(S_DS_GEN);
 		break;
+	case HostCmd_CMD_UAP_STA_DEAUTH:
+		if (mwifiex_cmd_uap_sta_deauth(priv, cmd, data_buf))
+			return -1;
+		break;
 	default:
 		dev_err(priv->adapter->dev,
 			"PREP_CMD: unknown cmd %#x\n", cmd_no);
diff --git a/drivers/net/wireless/mwifiex/uap_event.c b/drivers/net/wireless/mwifiex/uap_event.c
index 21c640d3b57..718066577c6 100644
--- a/drivers/net/wireless/mwifiex/uap_event.c
+++ b/drivers/net/wireless/mwifiex/uap_event.c
@@ -107,18 +107,15 @@ mwifiex_set_sta_ht_cap(struct mwifiex_private *priv, const u8 *ies,
  */
 static void mwifiex_del_sta_entry(struct mwifiex_private *priv, u8 *mac)
 {
-	struct mwifiex_sta_node *node, *tmp;
+	struct mwifiex_sta_node *node;
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->sta_list_spinlock, flags);
 
 	node = mwifiex_get_sta_entry(priv, mac);
 	if (node) {
-		list_for_each_entry_safe(node, tmp, &priv->sta_list,
-					 list) {
-			list_del(&node->list);
-			kfree(node);
-		}
+		list_del(&node->list);
+		kfree(node);
 	}
 
 	spin_unlock_irqrestore(&priv->sta_list_spinlock, flags);
@@ -295,3 +292,19 @@ int mwifiex_process_uap_event(struct mwifiex_private *priv)
 
 	return 0;
 }
+
+/* This function deletes station entry from associated station list.
+ * Also if both AP and STA are 11n enabled, RxReorder tables and TxBA stream
+ * tables created for this station are deleted.
+ */
+void mwifiex_uap_del_sta_data(struct mwifiex_private *priv,
+			      struct mwifiex_sta_node *node)
+{
+	if (priv->ap_11n_enabled && node->is_11n_enabled) {
+		mwifiex_11n_del_rx_reorder_tbl_by_ta(priv, node->mac_addr);
+		mwifiex_del_tx_ba_stream_tbl_by_ra(priv, node->mac_addr);
+	}
+	mwifiex_del_sta_entry(priv, node->mac_addr);
+
+	return;
+}