summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/mwl8k.c
diff options
context:
space:
mode:
authorLennert Buytenhek <buytenh@wantstofly.org>2010-01-12 13:48:56 +0100
committerJohn W. Linville <linville@tuxdriver.com>2010-01-12 14:21:15 -0500
commit854783444bab0024556c0aefdb0a860f2f1da286 (patch)
treeab03e580902c04e6d0b69a7cffedc1cf14399eb4 /drivers/net/wireless/mwl8k.c
parent4eae9edd38c0a9ce34e39100ccc69ff520bc1224 (diff)
mwl8k: properly set receive status rate index on 5 GHz receive
The mwl8k firmware uses indices into the 2.4 GHz band rate table for the receive descriptor channel field even if the packet was received on a 5 GHz channel, while mac80211 expects an index into the 5 GHz band rate table when packets are received on the 5 GHz band, which presents a mismatch as the 5 GHz band rate table lacks the five non-OFDM rates that the 2.4 GHz rate table starts with. To handle this properly, we need to substract 5 from the rate index field if the packet was received on a 5 GHz channel (and was not received at an MCS rate). Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/mwl8k.c')
-rw-r--r--drivers/net/wireless/mwl8k.c16
1 files changed, 14 insertions, 2 deletions
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 13dded49323..cc2ce61b799 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -759,7 +759,13 @@ mwl8k_rxd_8366_ap_process(void *_rxd, struct ieee80211_rx_status *status,
}
}
- status->band = IEEE80211_BAND_2GHZ;
+ if (rxd->channel > 14) {
+ status->band = IEEE80211_BAND_5GHZ;
+ if (!(status->flag & RX_FLAG_HT))
+ status->rate_idx -= 5;
+ } else {
+ status->band = IEEE80211_BAND_2GHZ;
+ }
status->freq = ieee80211_channel_to_frequency(rxd->channel);
*qos = rxd->qos_control;
@@ -850,7 +856,13 @@ mwl8k_rxd_sta_process(void *_rxd, struct ieee80211_rx_status *status,
if (rate_info & MWL8K_STA_RATE_INFO_MCS_FORMAT)
status->flag |= RX_FLAG_HT;
- status->band = IEEE80211_BAND_2GHZ;
+ if (rxd->channel > 14) {
+ status->band = IEEE80211_BAND_5GHZ;
+ if (!(status->flag & RX_FLAG_HT))
+ status->rate_idx -= 5;
+ } else {
+ status->band = IEEE80211_BAND_2GHZ;
+ }
status->freq = ieee80211_channel_to_frequency(rxd->channel);
*qos = rxd->qos_control;