orinoco: Move sources to a subdirectory

Keeping all the orinoco drivers in a common directory will make
maintenance easier.

Signed-off by: David Kilroy <kilroyd@googlemail.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 0 insertions, 264 deletions

diff --git a/drivers/net/wireless/orinoco_pci.c b/drivers/net/wireless/orinoco_pci.c
deleted file mode 100644
index 4ebd638a073..00000000000
--- a/drivers/net/wireless/orinoco_pci.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/* orinoco_pci.c
- * 
- * Driver for Prism 2.5/3 devices that have a direct PCI interface
- * (i.e. these are not PCMCIA cards in a PCMCIA-to-PCI bridge).
- * The card contains only one PCI region, which contains all the usual
- * hermes registers, as well as the COR register.
- *
- * Current maintainers are:
- * 	Pavel Roskin <proski AT gnu.org>
- * and	David Gibson <hermes AT gibson.dropbear.id.au>
- *
- * Some of this code is borrowed from orinoco_plx.c
- *	Copyright (C) 2001 Daniel Barlow <dan AT telent.net>
- * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing
- * has been copied from it. linux-wlan-ng-0.1.10 is originally :
- *	Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
- * This file originally written by:
- *	Copyright (C) 2001 Jean Tourrilhes <jt AT hpl.hp.com>
- * And is now maintained by:
- *	(C) Copyright David Gibson, IBM Corp. 2002-2003.
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use your
- * version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#define DRIVER_NAME "orinoco_pci"
-#define PFX DRIVER_NAME ": "
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
-#include "orinoco.h"
-#include "orinoco_pci.h"
-
-/* Offset of the COR register of the PCI card */
-#define HERMES_PCI_COR		(0x26)
-
-/* Bitmask to reset the card */
-#define HERMES_PCI_COR_MASK	(0x0080)
-
-/* Magic timeouts for doing the reset.
- * Those times are straight from wlan-ng, and it is claimed that they
- * are necessary. Alan will kill me. Take your time and grab a coffee. */
-#define HERMES_PCI_COR_ONT	(250)		/* ms */
-#define HERMES_PCI_COR_OFFT	(500)		/* ms */
-#define HERMES_PCI_COR_BUSYT	(500)		/* ms */
-
-/*
- * Do a soft reset of the card using the Configuration Option Register
- * We need this to get going...
- * This is the part of the code that is strongly inspired from wlan-ng
- *
- * Note : This code is done with irq enabled. This mean that many
- * interrupts will occur while we are there. This is why we use the
- * jiffies to regulate time instead of a straight mdelay(). Usually we
- * need only around 245 iteration of the loop to do 250 ms delay.
- *
- * Note bis : Don't try to access HERMES_CMD during the reset phase.
- * It just won't work !
- */
-static int orinoco_pci_cor_reset(struct orinoco_private *priv)
-{
-	hermes_t *hw = &priv->hw;
-	unsigned long timeout;
-	u16 reg;
-
-	/* Assert the reset until the card notices */
-	hermes_write_regn(hw, PCI_COR, HERMES_PCI_COR_MASK);
-	mdelay(HERMES_PCI_COR_ONT);
-
-	/* Give time for the card to recover from this hard effort */
-	hermes_write_regn(hw, PCI_COR, 0x0000);
-	mdelay(HERMES_PCI_COR_OFFT);
-
-	/* The card is ready when it's no longer busy */
-	timeout = jiffies + (HERMES_PCI_COR_BUSYT * HZ / 1000);
-	reg = hermes_read_regn(hw, CMD);
-	while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
-		mdelay(1);
-		reg = hermes_read_regn(hw, CMD);
-	}
-
-	/* Still busy? */
-	if (reg & HERMES_CMD_BUSY) {
-		printk(KERN_ERR PFX "Busy timeout\n");
-		return -ETIMEDOUT;
-	}
-
-	return 0;
-}
-
-static int orinoco_pci_init_one(struct pci_dev *pdev,
-				const struct pci_device_id *ent)
-{
-	int err;
-	struct orinoco_private *priv;
-	struct orinoco_pci_card *card;
-	struct net_device *dev;
-	void __iomem *hermes_io;
-
-	err = pci_enable_device(pdev);
-	if (err) {
-		printk(KERN_ERR PFX "Cannot enable PCI device\n");
-		return err;
-	}
-
-	err = pci_request_regions(pdev, DRIVER_NAME);
-	if (err) {
-		printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
-		goto fail_resources;
-	}
-
-	hermes_io = pci_iomap(pdev, 0, 0);
-	if (!hermes_io) {
-		printk(KERN_ERR PFX "Cannot remap chipset registers\n");
-		err = -EIO;
-		goto fail_map_hermes;
-	}
-
-	/* Allocate network device */
-	dev = alloc_orinocodev(sizeof(*card), &pdev->dev,
-			       orinoco_pci_cor_reset, NULL);
-	if (!dev) {
-		printk(KERN_ERR PFX "Cannot allocate network device\n");
-		err = -ENOMEM;
-		goto fail_alloc;
-	}
-
-	priv = netdev_priv(dev);
-	card = priv->card;
-	SET_NETDEV_DEV(dev, &pdev->dev);
-
-	hermes_struct_init(&priv->hw, hermes_io, HERMES_32BIT_REGSPACING);
-
-	err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
-			  dev->name, dev);
-	if (err) {
-		printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
-		err = -EBUSY;
-		goto fail_irq;
-	}
-
-	err = orinoco_pci_cor_reset(priv);
-	if (err) {
-		printk(KERN_ERR PFX "Initial reset failed\n");
-		goto fail;
-	}
-
-	err = register_netdev(dev);
-	if (err) {
-		printk(KERN_ERR PFX "Cannot register network device\n");
-		goto fail;
-	}
-
-	pci_set_drvdata(pdev, dev);
-	printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s\n", dev->name,
-	       pci_name(pdev));
-
-	return 0;
-
- fail:
-	free_irq(pdev->irq, dev);
-
- fail_irq:
-	pci_set_drvdata(pdev, NULL);
-	free_orinocodev(dev);
-
- fail_alloc:
-	pci_iounmap(pdev, hermes_io);
-
- fail_map_hermes:
-	pci_release_regions(pdev);
-
- fail_resources:
-	pci_disable_device(pdev);
-
-	return err;
-}
-
-static void __devexit orinoco_pci_remove_one(struct pci_dev *pdev)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-	struct orinoco_private *priv = netdev_priv(dev);
-
-	unregister_netdev(dev);
-	free_irq(pdev->irq, dev);
-	pci_set_drvdata(pdev, NULL);
-	free_orinocodev(dev);
-	pci_iounmap(pdev, priv->hw.iobase);
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-}
-
-static struct pci_device_id orinoco_pci_id_table[] = {
-	/* Intersil Prism 3 */
-	{0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID,},
-	/* Intersil Prism 2.5 */
-	{0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID,},
-	/* Samsung MagicLAN SWL-2210P */
-	{0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID,},
-	{0,},
-};
-
-MODULE_DEVICE_TABLE(pci, orinoco_pci_id_table);
-
-static struct pci_driver orinoco_pci_driver = {
-	.name		= DRIVER_NAME,
-	.id_table	= orinoco_pci_id_table,
-	.probe		= orinoco_pci_init_one,
-	.remove		= __devexit_p(orinoco_pci_remove_one),
-	.suspend	= orinoco_pci_suspend,
-	.resume		= orinoco_pci_resume,
-};
-
-static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
-	" (Pavel Roskin <proski@gnu.org>,"
-	" David Gibson <hermes@gibson.dropbear.id.au> &"
-	" Jean Tourrilhes <jt@hpl.hp.com>)";
-MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>");
-MODULE_DESCRIPTION("Driver for wireless LAN cards using direct PCI interface");
-MODULE_LICENSE("Dual MPL/GPL");
-
-static int __init orinoco_pci_init(void)
-{
-	printk(KERN_DEBUG "%s\n", version);
-	return pci_register_driver(&orinoco_pci_driver);
-}
-
-static void __exit orinoco_pci_exit(void)
-{
-	pci_unregister_driver(&orinoco_pci_driver);
-}
-
-module_init(orinoco_pci_init);
-module_exit(orinoco_pci_exit);
-
-/*
- * Local variables:
- *  c-indent-level: 8
- *  c-basic-offset: 8
- *  tab-width: 8
- * End:
- */