[PATCH] orinoco: reduce differences between PCI drivers, create orinoco_pci.h

Make all Orinoco PCI drivers (orinoco_pci, orinoco_plx, orinoco_tmd and
orinoco_nortel) as similar as possible.  Use the best implementation of
error handling, the best error messages, the best comments.

Put common code to orinoco_pci.h.  For now, it's suspend and resume
functions and function for registering the network device.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 125 insertions, 0 deletions

diff --git a/drivers/net/wireless/orinoco_pci.h b/drivers/net/wireless/orinoco_pci.h
new file mode 100644
index 00000000000..b05a9a5b1f5
--- /dev/null
+++ b/drivers/net/wireless/orinoco_pci.h
@@ -0,0 +1,125 @@
+/* orinoco_pci.h
+ * 
+ * Common code for all Orinoco drivers for PCI devices, including
+ * both native PCI and PCMCIA-to-PCI bridges.
+ *
+ * Copyright (C) 2005, Pavel Roskin.
+ * See orinoco.c for license.
+ */
+
+#ifndef _ORINOCO_PCI_H
+#define _ORINOCO_PCI_H
+
+#include <linux/netdevice.h>
+
+/* Driver specific data */
+struct orinoco_pci_card {
+	void __iomem *bridge_io;
+	void __iomem *attr_io;
+};
+
+/* Set base address or memory range of the network device based on
+ * the PCI device it's using.  Specify BAR of the "main" resource.
+ * To be used after request_irq().  */
+static inline void orinoco_pci_setup_netdev(struct net_device *dev,
+					    struct pci_dev *pdev, int bar)
+{
+	char *range_type;
+	unsigned long start = pci_resource_start(pdev, bar);
+	unsigned long len = pci_resource_len(pdev, bar);
+	unsigned long flags = pci_resource_flags(pdev, bar);
+	unsigned long end = start + len - 1;
+
+	dev->irq = pdev->irq;
+	if (flags & IORESOURCE_IO) {
+		dev->base_addr = start;
+		range_type = "ports";
+	} else {
+		dev->mem_start = start;
+		dev->mem_end = end;
+		range_type = "memory";
+	}
+
+	printk(KERN_DEBUG PFX "%s: irq %d, %s 0x%lx-0x%lx\n",
+	       pci_name(pdev), pdev->irq, range_type, start, end);
+}
+
+static int orinoco_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct orinoco_private *priv = netdev_priv(dev);
+	unsigned long flags;
+	int err;
+
+	err = orinoco_lock(priv, &flags);
+	if (err) {
+		printk(KERN_ERR "%s: cannot lock hardware for suspend\n",
+		       dev->name);
+		return err;
+	}
+
+	err = __orinoco_down(dev);
+	if (err)
+		printk(KERN_WARNING "%s: error %d bringing interface down "
+		       "for suspend\n", dev->name, err);
+	
+	netif_device_detach(dev);
+
+	priv->hw_unavailable++;
+	
+	orinoco_unlock(priv, &flags);
+
+	free_irq(pdev->irq, dev);
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, PCI_D3hot);
+
+	return 0;
+}
+
+static int orinoco_pci_resume(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct orinoco_private *priv = netdev_priv(dev);
+	unsigned long flags;
+	int err;
+
+	pci_set_power_state(pdev, 0);
+	pci_enable_device(pdev);
+	pci_restore_state(pdev);
+
+	err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ,
+			  dev->name, dev);
+	if (err) {
+		printk(KERN_ERR "%s: cannot re-allocate IRQ on resume\n",
+		       dev->name);
+		pci_disable_device(pdev);
+		return -EBUSY;
+	}
+
+	err = orinoco_reinit_firmware(dev);
+	if (err) {
+		printk(KERN_ERR "%s: error %d re-initializing firmware "
+		       "on resume\n", dev->name, err);
+		return err;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	netif_device_attach(dev);
+
+	priv->hw_unavailable--;
+
+	if (priv->open && (! priv->hw_unavailable)) {
+		err = __orinoco_up(dev);
+		if (err)
+			printk(KERN_ERR "%s: Error %d restarting card on resume\n",
+			       dev->name, err);
+	}
+	
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+#endif /* _ORINOCO_PCI_H */