[PATCH] prism54: whitespace cleanup

NET: prism54 - whitespace cleanup

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 11 insertions, 12 deletions

diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c
index f692dccf0d0..f6354b1cbc2 100644
--- a/drivers/net/wireless/prism54/islpci_hotplug.c
+++ b/drivers/net/wireless/prism54/islpci_hotplug.c
@@ -1,5 +1,4 @@
 /*
- *  
  *  Copyright (C) 2002 Intersil Americas Inc.
  *  Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
  *
@@ -40,8 +39,8 @@ static int	init_pcitm = 0;
 module_param(init_pcitm, int, 0);
 
 /* In this order: vendor, device, subvendor, subdevice, class, class_mask,
- * driver_data 
- * If you have an update for this please contact prism54-devel@prism54.org 
+ * driver_data
+ * If you have an update for this please contact prism54-devel@prism54.org
  * The latest list can be found at http://prism54.org/supported_cards.php */
 static const struct pci_device_id prism54_id_tbl[] = {
 	/* Intersil PRISM Duette/Prism GT Wireless LAN adapter */
@@ -132,15 +131,15 @@ prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* 0x40 is the programmable timer to configure the response timeout (TRDY_TIMEOUT)
 	 * 0x41 is the programmable timer to configure the retry timeout (RETRY_TIMEOUT)
-	 * 	The RETRY_TIMEOUT is used to set the number of retries that the core, as a
-	 * 	Master, will perform before abandoning a cycle. The default value for
-	 * 	RETRY_TIMEOUT is 0x80, which far exceeds the PCI 2.1 requirement for new
-	 * 	devices. A write of zero to the RETRY_TIMEOUT register disables this
-	 * 	function to allow use with any non-compliant legacy devices that may
-	 * 	execute more retries.
+	 *	The RETRY_TIMEOUT is used to set the number of retries that the core, as a
+	 *	Master, will perform before abandoning a cycle. The default value for
+	 *	RETRY_TIMEOUT is 0x80, which far exceeds the PCI 2.1 requirement for new
+	 *	devices. A write of zero to the RETRY_TIMEOUT register disables this
+	 *	function to allow use with any non-compliant legacy devices that may
+	 *	execute more retries.
 	 *
-	 * 	Writing zero to both these two registers will disable both timeouts and
-	 * 	*can* solve problems caused by devices that are slow to respond.
+	 *	Writing zero to both these two registers will disable both timeouts and
+	 *	*can* solve problems caused by devices that are slow to respond.
 	 *	Make this configurable - MSW
 	 */
 	if ( init_pcitm >= 0 ) {
@@ -241,7 +240,7 @@ prism54_remove(struct pci_dev *pdev)
 		isl38xx_disable_interrupts(priv->device_base);
 		islpci_set_state(priv, PRV_STATE_OFF);
 		/* This bellow causes a lockup at rmmod time. It might be
-		 * because some interrupts still linger after rmmod time, 
+		 * because some interrupts still linger after rmmod time,
 		 * see bug #17 */
 		/* pci_set_power_state(pdev, 3);*/	/* try to power-off */
 	}