diff options
author | Ivo van Doorn <ivdoorn@gmail.com> | 2007-10-13 16:26:23 +0200 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2008-01-28 15:02:51 -0800 |
commit | addc81bd428f9eb29ed2ab64ad4039c6aed55aea (patch) | |
tree | 949871f2ba2d4f215df8bd323b1dec6d7906e104 /drivers/net/wireless/rt2x00/rt2x00config.c | |
parent | 362f3b6bfbb18b4b8bd8a8ef391fb95efb43c632 (diff) |
[PATCH] rt2x00: Correctly translate mac80211 antenna setup to rt2x00
mac80211 has 3 values for the antenna setup:
0 - default
1 - use antenna 1
2 - use antenna 2
This means that rt2x00 should store the default value
from the EEPROM somwhere and use that when mac80211 indicates
that the antenna setup is 0.
This also implies that rt2x00 should no longer write the
hw->config.antenna_sel_* values based on the EEPROM input.
This also adds the basis in rt2x00lib for correct software
diversity handling. By default rt2x00lib will now configure
antenna B instead of hardware diversity.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2x00config.c')
-rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00config.c | 51 |
1 files changed, 49 insertions, 2 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index 12914cf7156..04518b089bd 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -100,6 +100,8 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf libconf; struct ieee80211_hw_mode *mode; struct ieee80211_rate *rate; + struct antenna_setup *default_ant = &rt2x00dev->default_ant; + struct antenna_setup *active_ant = &rt2x00dev->link.active_ant; int flags = 0; int short_slot_time; @@ -122,7 +124,35 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, flags |= CONFIG_UPDATE_CHANNEL; if (rt2x00dev->tx_power != conf->power_level) flags |= CONFIG_UPDATE_TXPOWER; - if (rt2x00dev->rx_status.antenna == conf->antenna_sel_rx) + + /* + * Determining changes in the antenna setups request several checks: + * antenna_sel_{r,t}x = 0 + * -> Does active_{r,t}x match default_{r,t}x + * -> Is default_{r,t}x SW_DIVERSITY + * antenna_sel_{r,t}x = 1/2 + * -> Does active_{r,t}x match antenna_sel_{r,t}x + * The reason for not updating the antenna while SW diversity + * should be used is simple: Software diversity means that + * we should switch between the antenna's based on the + * quality. This means that the current antenna is good enough + * to work with untill the link tuner decides that an antenna + * switch should be performed. + */ + if (!conf->antenna_sel_rx && + default_ant->rx != ANTENNA_SW_DIVERSITY && + default_ant->rx != active_ant->rx) + flags |= CONFIG_UPDATE_ANTENNA; + else if (conf->antenna_sel_rx && + conf->antenna_sel_rx != active_ant->rx) + flags |= CONFIG_UPDATE_ANTENNA; + + if (!conf->antenna_sel_tx && + default_ant->tx != ANTENNA_SW_DIVERSITY && + default_ant->tx != active_ant->tx) + flags |= CONFIG_UPDATE_ANTENNA; + else if (conf->antenna_sel_tx && + conf->antenna_sel_tx != active_ant->tx) flags |= CONFIG_UPDATE_ANTENNA; /* @@ -171,6 +201,22 @@ config: sizeof(libconf.rf)); } + if (flags & CONFIG_UPDATE_ANTENNA) { + if (conf->antenna_sel_rx) + libconf.ant.rx = conf->antenna_sel_rx; + else if (default_ant->rx != ANTENNA_SW_DIVERSITY) + libconf.ant.rx = default_ant->rx; + else if (active_ant->rx == ANTENNA_SW_DIVERSITY) + libconf.ant.rx = ANTENNA_B; + + if (conf->antenna_sel_tx) + libconf.ant.tx = conf->antenna_sel_tx; + else if (default_ant->tx != ANTENNA_SW_DIVERSITY) + libconf.ant.tx = default_ant->tx; + else if (active_ant->tx == ANTENNA_SW_DIVERSITY) + libconf.ant.tx = ANTENNA_B; + } + if (flags & CONFIG_UPDATE_SLOT_TIME) { short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME; @@ -201,5 +247,6 @@ config: rt2x00dev->rx_status.freq = conf->freq; rt2x00dev->rx_status.channel = conf->channel; rt2x00dev->tx_power = conf->power_level; - rt2x00dev->rx_status.antenna = conf->antenna_sel_rx; + rt2x00dev->link.active_ant.rx = libconf.ant.rx; + rt2x00dev->link.active_ant.tx = libconf.ant.tx; } |