rt2x00: Enable LED class support for rt2500usb/rt73usb

Add kerneldoc for vendor request functions in rt2x00usb.
Add asynchroneous vendor request function in rt2x00usb.

With the availability of the asynchroneuous vendor request
we can now enable LED class support for rt2500usb and rt73usb.
Since LED handling is not important, it doesn't really matter
if a register call fails (This solution is better then no
LED class support at all).

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 95 insertions, 34 deletions

diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index af606638e22..275b089a2a4 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -60,34 +60,47 @@
 #define USB_VENDOR_REQUEST_IN	( USB_DIR_IN | USB_VENDOR_REQUEST )
 #define USB_VENDOR_REQUEST_OUT	( USB_DIR_OUT | USB_VENDOR_REQUEST )
 
-/*
- * USB vendor commands.
- */
-#define USB_DEVICE_MODE		0x01
-#define USB_SINGLE_WRITE	0x02
-#define USB_SINGLE_READ		0x03
-#define USB_MULTI_WRITE		0x06
-#define USB_MULTI_READ		0x07
-#define USB_EEPROM_WRITE	0x08
-#define USB_EEPROM_READ		0x09
-#define USB_LED_CONTROL		0x0a	/* RT73USB */
-#define USB_RX_CONTROL		0x0c
+/**
+ * enum rt2x00usb_vendor_request: USB vendor commands.
+ */
+enum rt2x00usb_vendor_request {
+	USB_DEVICE_MODE = 1,
+	USB_SINGLE_WRITE = 2,
+	USB_SINGLE_READ = 3,
+	USB_MULTI_WRITE = 6,
+	USB_MULTI_READ = 7,
+	USB_EEPROM_WRITE = 8,
+	USB_EEPROM_READ = 9,
+	USB_LED_CONTROL = 10, /* RT73USB */
+	USB_RX_CONTROL = 12,
+};
 
-/*
- * Device modes offset
+/**
+ * enum rt2x00usb_mode_offset: Device modes offset.
  */
-#define USB_MODE_RESET		0x01
-#define USB_MODE_UNPLUG		0x02
-#define USB_MODE_FUNCTION	0x03
-#define USB_MODE_TEST		0x04
-#define USB_MODE_SLEEP		0x07	/* RT73USB */
-#define USB_MODE_FIRMWARE	0x08	/* RT73USB */
-#define USB_MODE_WAKEUP		0x09	/* RT73USB */
+enum rt2x00usb_mode_offset {
+	USB_MODE_RESET = 1,
+	USB_MODE_UNPLUG = 2,
+	USB_MODE_FUNCTION = 3,
+	USB_MODE_TEST = 4,
+	USB_MODE_SLEEP = 7,	/* RT73USB */
+	USB_MODE_FIRMWARE = 8,	/* RT73USB */
+	USB_MODE_WAKEUP = 9,	/* RT73USB */
+};
 
-/*
- * Used to read/write from/to the device.
+/**
+ * rt2x00usb_vendor_request - Send register command to device
+ * @rt2x00dev: Pointer to &struct rt2x00_dev
+ * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
+ * @requesttype: Request type &USB_VENDOR_REQUEST_*
+ * @offset: Register offset to perform action on
+ * @value: Value to write to device
+ * @buffer: Buffer where information will be read/written to by device
+ * @buffer_length: Size of &buffer
+ * @timeout: Operation timeout
+ *
  * This is the main function to communicate with the device,
- * the buffer argument _must_ either be NULL or point to
+ * the &buffer argument _must_ either be NULL or point to
  * a buffer allocated by kmalloc. Failure to do so can lead
  * to unexpected behavior depending on the architecture.
  */
@@ -97,13 +110,21 @@ int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev,
 			     void *buffer, const u16 buffer_length,
 			     const int timeout);
 
-/*
- * Used to read/write from/to the device.
+/**
+ * rt2x00usb_vendor_request_buff - Send register command to device (buffered)
+ * @rt2x00dev: Pointer to &struct rt2x00_dev
+ * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
+ * @requesttype: Request type &USB_VENDOR_REQUEST_*
+ * @offset: Register offset to perform action on
+ * @buffer: Buffer where information will be read/written to by device
+ * @buffer_length: Size of &buffer
+ * @timeout: Operation timeout
+ *
  * This function will use a previously with kmalloc allocated cache
  * to communicate with the device. The contents of the buffer pointer
  * will be copied to this cache when writing, or read from the cache
  * when reading.
- * Buffers send to rt2x00usb_vendor_request _must_ be allocated with
+ * Buffers send to &rt2x00usb_vendor_request _must_ be allocated with
  * kmalloc. Hence the reason for using a previously allocated cache
  * which has been allocated properly.
  */
@@ -112,15 +133,32 @@ int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev,
 				  const u16 offset, void *buffer,
 				  const u16 buffer_length, const int timeout);
 
-/*
- * A version of rt2x00usb_vendor_request_buff which must be called
- * if the usb_cache_mutex is already held. */
+/**
+ * rt2x00usb_vendor_request_buff - Send register command to device (buffered)
+ * @rt2x00dev: Pointer to &struct rt2x00_dev
+ * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
+ * @requesttype: Request type &USB_VENDOR_REQUEST_*
+ * @offset: Register offset to perform action on
+ * @buffer: Buffer where information will be read/written to by device
+ * @buffer_length: Size of &buffer
+ * @timeout: Operation timeout
+ *
+ * A version of &rt2x00usb_vendor_request_buff which must be called
+ * if the usb_cache_mutex is already held.
+ */
 int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev,
 				   const u8 request, const u8 requesttype,
 				   const u16 offset, void *buffer,
 				   const u16 buffer_length, const int timeout);
 
-/*
+/**
+ * rt2x00usb_vendor_request_sw - Send single register command to device
+ * @rt2x00dev: Pointer to &struct rt2x00_dev
+ * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
+ * @offset: Register offset to perform action on
+ * @value: Value to write to device
+ * @timeout: Operation timeout
+ *
  * Simple wrapper around rt2x00usb_vendor_request to write a single
  * command to the device. Since we don't use the buffer argument we
  * don't have to worry about kmalloc here.
@@ -136,7 +174,12 @@ static inline int rt2x00usb_vendor_request_sw(struct rt2x00_dev *rt2x00dev,
 					value, NULL, 0, timeout);
 }
 
-/*
+/**
+ * rt2x00usb_eeprom_read - Read eeprom from device
+ * @rt2x00dev: Pointer to &struct rt2x00_dev
+ * @eeprom: Pointer to eeprom array to store the information in
+ * @length: Number of bytes to read from the eeprom
+ *
  * Simple wrapper around rt2x00usb_vendor_request to read the eeprom
  * from the device. Note that the eeprom argument _must_ be allocated using
  * kmalloc for correct handling inside the kernel USB layer.
@@ -147,10 +190,28 @@ static inline int rt2x00usb_eeprom_read(struct rt2x00_dev *rt2x00dev,
 	int timeout = REGISTER_TIMEOUT * (lenght / sizeof(u16));
 
 	return rt2x00usb_vendor_request(rt2x00dev, USB_EEPROM_READ,
-					USB_VENDOR_REQUEST_IN, 0x0000,
-					0x0000, eeprom, lenght, timeout);
+					USB_VENDOR_REQUEST_IN, 0, 0,
+					eeprom, lenght, timeout);
 }
 
+/**
+ * rt2x00usb_vendor_request_async - Send register command to device (async)
+ * @rt2x00dev: Pointer to &struct rt2x00_dev
+ * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
+ * @offset: Register offset to perform action on
+ * @value: Value to write to device
+ *
+ * Asynchroneous version of &rt2x00usb_vendor_request this is required
+ * for some routines where the driver cannot sleep because it is in
+ * irq context. Note that with this function the driver will not be
+ * notified on failure or timeout of the command. It will only be notified
+ * if the start of the command succeeded or not. This means it should not be
+ * used when the command must succeed.
+ */
+int rt2x00usb_vendor_request_async(struct rt2x00_dev *rt2x00dev,
+				   const u8 request, const u16 offset,
+				   const u16 value);
+
 /*
  * Radio handlers
  */