rt2x00: Cleanup chip handling helper functions.

Let each of them take a struct rt2x00_dev pointer as argument instead of
a mixture of struct rt2x00_chip and struct rt2x00_dev pointers.
Preparation for further clean ups in the rt2x00 chip handling, especially
for rt2800 devices.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 16 insertions, 20 deletions

diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 6ce88d3c3b6..a0269129439 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -136,8 +136,8 @@ static void rt73usb_rf_write(struct rt2x00_dev *rt2x00dev,
 		 * all others contain 20 bits.
 		 */
 		rt2x00_set_field32(&reg, PHY_CSR4_NUMBER_OF_BITS,
-				   20 + (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
-					 rt2x00_rf(&rt2x00dev->chip, RF2527)));
+				   20 + (rt2x00_rf(rt2x00dev, RF5225) ||
+					 rt2x00_rf(rt2x00dev, RF2527)));
 		rt2x00_set_field32(&reg, PHY_CSR4_IF_SELECT, 0);
 		rt2x00_set_field32(&reg, PHY_CSR4_BUSY, 1);
 
@@ -741,11 +741,9 @@ static void rt73usb_config_ant(struct rt2x00_dev *rt2x00dev,
 
 	rt2x00usb_register_write(rt2x00dev, PHY_CSR0, reg);
 
-	if (rt2x00_rf(&rt2x00dev->chip, RF5226) ||
-	    rt2x00_rf(&rt2x00dev->chip, RF5225))
+	if (rt2x00_rf(rt2x00dev, RF5226) || rt2x00_rf(rt2x00dev, RF5225))
 		rt73usb_config_antenna_5x(rt2x00dev, ant);
-	else if (rt2x00_rf(&rt2x00dev->chip, RF2528) ||
-		 rt2x00_rf(&rt2x00dev->chip, RF2527))
+	else if (rt2x00_rf(rt2x00dev, RF2528) || rt2x00_rf(rt2x00dev, RF2527))
 		rt73usb_config_antenna_2x(rt2x00dev, ant);
 }
 
@@ -779,8 +777,7 @@ static void rt73usb_config_channel(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 	rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
 
-	smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) ||
-		  rt2x00_rf(&rt2x00dev->chip, RF2527));
+	smart = !(rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF2527));
 
 	rt73usb_bbp_read(rt2x00dev, 3, &r3);
 	rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart);
@@ -1210,8 +1207,7 @@ static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev)
 	rt2x00usb_register_write(rt2x00dev, SEC_CSR5, 0x00000000);
 
 	reg = 0x000023b0;
-	if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
-	    rt2x00_rf(&rt2x00dev->chip, RF2527))
+	if (rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF2527))
 		rt2x00_set_field32(&reg, PHY_CSR1_RF_RPI, 1);
 	rt2x00usb_register_write(rt2x00dev, PHY_CSR1, reg);
 
@@ -1827,16 +1823,16 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_chip(rt2x00dev, RT2571, value, reg);
 	rt2x00_print_chip(rt2x00dev);
 
-	if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0x25730) ||
-	    rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) {
+	if (!rt2x00_check_rev(rt2x00dev, 0x000ffff0, 0x25730) ||
+	    rt2x00_check_rev(rt2x00dev, 0x0000000f, 0)) {
 		ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
 		return -ENODEV;
 	}
 
-	if (!rt2x00_rf(&rt2x00dev->chip, RF5226) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF2528) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF5225) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF2527)) {
+	if (!rt2x00_rf(rt2x00dev, RF5226) &&
+	    !rt2x00_rf(rt2x00dev, RF2528) &&
+	    !rt2x00_rf(rt2x00dev, RF5225) &&
+	    !rt2x00_rf(rt2x00dev, RF2527)) {
 		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
 		return -ENODEV;
 	}
@@ -2081,17 +2077,17 @@ static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	spec->supported_bands = SUPPORT_BAND_2GHZ;
 	spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
 
-	if (rt2x00_rf(&rt2x00dev->chip, RF2528)) {
+	if (rt2x00_rf(rt2x00dev, RF2528)) {
 		spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528);
 		spec->channels = rf_vals_bg_2528;
-	} else if (rt2x00_rf(&rt2x00dev->chip, RF5226)) {
+	} else if (rt2x00_rf(rt2x00dev, RF5226)) {
 		spec->supported_bands |= SUPPORT_BAND_5GHZ;
 		spec->num_channels = ARRAY_SIZE(rf_vals_5226);
 		spec->channels = rf_vals_5226;
-	} else if (rt2x00_rf(&rt2x00dev->chip, RF2527)) {
+	} else if (rt2x00_rf(rt2x00dev, RF2527)) {
 		spec->num_channels = 14;
 		spec->channels = rf_vals_5225_2527;
-	} else if (rt2x00_rf(&rt2x00dev->chip, RF5225)) {
+	} else if (rt2x00_rf(rt2x00dev, RF5225)) {
 		spec->supported_bands |= SUPPORT_BAND_5GHZ;
 		spec->num_channels = ARRAY_SIZE(rf_vals_5225_2527);
 		spec->channels = rf_vals_5225_2527;