Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	sound/core/memalloc.c

24 files changed, 1909 insertions, 603 deletions

diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index d485a86bba7..f839ce044af 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -1,5 +1,5 @@
-config RT2X00
-	tristate "Ralink driver support"
+menuconfig RT2X00
+	bool "Ralink driver support"
 	depends on MAC80211 && WLAN_80211 && EXPERIMENTAL
 	---help---
 	  This will enable the experimental support for the Ralink drivers,
@@ -17,31 +17,6 @@ config RT2X00
 
 if RT2X00
 
-config RT2X00_LIB
-	tristate
-
-config RT2X00_LIB_PCI
-	tristate
-	select RT2X00_LIB
-
-config RT2X00_LIB_USB
-	tristate
-	select RT2X00_LIB
-
-config RT2X00_LIB_FIRMWARE
-	boolean
-	depends on RT2X00_LIB
-	select FW_LOADER
-
-config RT2X00_LIB_RFKILL
-	boolean
-	depends on RT2X00_LIB
-	select RFKILL
-
-config RT2X00_LIB_LEDS
-	boolean
-	depends on RT2X00_LIB && NEW_LEDS
-
 config RT2400PCI
 	tristate "Ralink rt2400 (PCI/PCMCIA) support"
 	depends on PCI
@@ -53,23 +28,6 @@ config RT2400PCI
 
 	  When compiled as a module, this driver will be called "rt2400pci.ko".
 
-config RT2400PCI_RFKILL
-	bool "Ralink rt2400 rfkill support"
-	depends on RT2400PCI
-	select RT2X00_LIB_RFKILL
-	---help---
-	  This adds support for integrated rt2400 hardware that features a
-	  hardware button to control the radio state.
-	  This feature depends on the RF switch subsystem rfkill.
-
-config RT2400PCI_LEDS
-	bool "Ralink rt2400 leds support"
-	depends on RT2400PCI && NEW_LEDS
-	select LEDS_CLASS
-	select RT2X00_LIB_LEDS
-	---help---
-	  This adds support for led triggers provided my mac80211.
-
 config RT2500PCI
 	tristate "Ralink rt2500 (PCI/PCMCIA) support"
 	depends on PCI
@@ -81,28 +39,12 @@ config RT2500PCI
 
 	  When compiled as a module, this driver will be called "rt2500pci.ko".
 
-config RT2500PCI_RFKILL
-	bool "Ralink rt2500 rfkill support"
-	depends on RT2500PCI
-	select RT2X00_LIB_RFKILL
-	---help---
-	  This adds support for integrated rt2500 hardware that features a
-	  hardware button to control the radio state.
-	  This feature depends on the RF switch subsystem rfkill.
-
-config RT2500PCI_LEDS
-	bool "Ralink rt2500 leds support"
-	depends on RT2500PCI && NEW_LEDS
-	select LEDS_CLASS
-	select RT2X00_LIB_LEDS
-	---help---
-	  This adds support for led triggers provided my mac80211.
-
 config RT61PCI
 	tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support"
 	depends on PCI
 	select RT2X00_LIB_PCI
 	select RT2X00_LIB_FIRMWARE
+	select RT2X00_LIB_CRYPTO
 	select CRC_ITU_T
 	select EEPROM_93CX6
 	---help---
@@ -111,23 +53,6 @@ config RT61PCI
 
 	  When compiled as a module, this driver will be called "rt61pci.ko".
 
-config RT61PCI_RFKILL
-	bool "Ralink rt2501/rt61 rfkill support"
-	depends on RT61PCI
-	select RT2X00_LIB_RFKILL
-	---help---
-	  This adds support for integrated rt61 hardware that features a
-	  hardware button to control the radio state.
-	  This feature depends on the RF switch subsystem rfkill.
-
-config RT61PCI_LEDS
-	bool "Ralink rt2501/rt61 leds support"
-	depends on RT61PCI && NEW_LEDS
-	select LEDS_CLASS
-	select RT2X00_LIB_LEDS
-	---help---
-	  This adds support for led triggers provided my mac80211.
-
 config RT2500USB
 	tristate "Ralink rt2500 (USB) support"
 	depends on USB
@@ -138,19 +63,12 @@ config RT2500USB
 
 	  When compiled as a module, this driver will be called "rt2500usb.ko".
 
-config RT2500USB_LEDS
-	bool "Ralink rt2500 leds support"
-	depends on RT2500USB && NEW_LEDS
-	select LEDS_CLASS
-	select RT2X00_LIB_LEDS
-	---help---
-	  This adds support for led triggers provided my mac80211.
-
 config RT73USB
 	tristate "Ralink rt2501/rt73 (USB) support"
 	depends on USB
 	select RT2X00_LIB_USB
 	select RT2X00_LIB_FIRMWARE
+	select RT2X00_LIB_CRYPTO
 	select CRC_ITU_T
 	---help---
 	  This adds support for rt2501 wireless chipset family.
@@ -158,13 +76,37 @@ config RT73USB
 
 	  When compiled as a module, this driver will be called "rt73usb.ko".
 
-config RT73USB_LEDS
-	bool "Ralink rt2501/rt73 leds support"
-	depends on RT73USB && NEW_LEDS
-	select LEDS_CLASS
-	select RT2X00_LIB_LEDS
-	---help---
-	  This adds support for led triggers provided my mac80211.
+config RT2X00_LIB_PCI
+	tristate
+	select RT2X00_LIB
+
+config RT2X00_LIB_USB
+	tristate
+	select RT2X00_LIB
+
+config RT2X00_LIB
+	tristate
+
+config RT2X00_LIB_FIRMWARE
+	boolean
+	select FW_LOADER
+
+config RT2X00_LIB_CRYPTO
+	boolean
+
+config RT2X00_LIB_RFKILL
+	boolean
+	default y if (RT2X00_LIB=y && RFKILL=y) || (RT2X00_LIB=m && RFKILL!=n)
+
+comment "rt2x00 rfkill support disabled due to modularized RFKILL and built-in rt2x00"
+	depends on RT2X00_LIB=y && RFKILL=m
+
+config RT2X00_LIB_LEDS
+	boolean
+	default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n)
+
+comment "rt2x00 leds support disabled due to modularized LEDS_CLASS and built-in rt2x00"
+	depends on RT2X00_LIB=y && LEDS_CLASS=m
 
 config RT2X00_LIB_DEBUGFS
 	bool "Ralink debugfs support"
diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile
index 1087dbcf1a0..917cb4f3b03 100644
--- a/drivers/net/wireless/rt2x00/Makefile
+++ b/drivers/net/wireless/rt2x00/Makefile
@@ -3,6 +3,7 @@ rt2x00lib-y				+= rt2x00mac.o
 rt2x00lib-y				+= rt2x00config.o
 rt2x00lib-y				+= rt2x00queue.o
 rt2x00lib-$(CONFIG_RT2X00_LIB_DEBUGFS)	+= rt2x00debug.o
+rt2x00lib-$(CONFIG_RT2X00_LIB_CRYPTO)	+= rt2x00crypto.o
 rt2x00lib-$(CONFIG_RT2X00_LIB_RFKILL)	+= rt2x00rfkill.o
 rt2x00lib-$(CONFIG_RT2X00_LIB_FIRMWARE)	+= rt2x00firmware.o
 rt2x00lib-$(CONFIG_RT2X00_LIB_LEDS)	+= rt2x00leds.o
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 4c0538d6099..08cb9eec16a 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -231,7 +231,7 @@ static const struct rt2x00debug rt2400pci_rt2x00debug = {
 };
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 
-#ifdef CONFIG_RT2400PCI_RFKILL
+#ifdef CONFIG_RT2X00_LIB_RFKILL
 static int rt2400pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
@@ -241,9 +241,9 @@ static int rt2400pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 }
 #else
 #define rt2400pci_rfkill_poll	NULL
-#endif /* CONFIG_RT2400PCI_RFKILL */
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
 
-#ifdef CONFIG_RT2400PCI_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
 static void rt2400pci_brightness_set(struct led_classdev *led_cdev,
 				     enum led_brightness brightness)
 {
@@ -288,7 +288,7 @@ static void rt2400pci_init_led(struct rt2x00_dev *rt2x00dev,
 	led->led_dev.blink_set = rt2400pci_blink_set;
 	led->flags = LED_INITIALIZED;
 }
-#endif /* CONFIG_RT2400PCI_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
 
 /*
  * Configuration handlers.
@@ -1241,7 +1241,7 @@ static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance)
 	if (!reg)
 		return IRQ_NONE;
 
-	if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 		return IRQ_HANDLED;
 
 	/*
@@ -1374,22 +1374,22 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Store led mode, for correct led behaviour.
 	 */
-#ifdef CONFIG_RT2400PCI_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
 
 	rt2400pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
 	if (value == LED_MODE_TXRX_ACTIVITY)
 		rt2400pci_init_led(rt2x00dev, &rt2x00dev->led_qual,
 				   LED_TYPE_ACTIVITY);
-#endif /* CONFIG_RT2400PCI_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
 
 	/*
 	 * Detect if this device has an hardware controlled radio.
 	 */
-#ifdef CONFIG_RT2400PCI_RFKILL
+#ifdef CONFIG_RT2X00_LIB_RFKILL
 	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
 		__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT2400PCI_RFKILL */
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
 
 	/*
 	 * Check if the BBP tuning should be enabled.
@@ -1404,7 +1404,7 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
  * RF value list for RF2420 & RF2421
  * Supports: 2.4 GHz
  */
-static const struct rf_channel rf_vals_bg[] = {
+static const struct rf_channel rf_vals_b[] = {
 	{ 1,  0x00022058, 0x000c1fda, 0x00000101, 0 },
 	{ 2,  0x00022058, 0x000c1fee, 0x00000101, 0 },
 	{ 3,  0x00022058, 0x000c2002, 0x00000101, 0 },
@@ -1421,10 +1421,11 @@ static const struct rf_channel rf_vals_bg[] = {
 	{ 14, 0x00022058, 0x000c20fa, 0x00000101, 0 },
 };
 
-static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 {
 	struct hw_mode_spec *spec = &rt2x00dev->spec;
-	u8 *txpower;
+	struct channel_info *info;
+	char *tx_power;
 	unsigned int i;
 
 	/*
@@ -1440,23 +1441,28 @@ static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 						   EEPROM_MAC_ADDR_0));
 
 	/*
-	 * Convert tx_power array in eeprom.
-	 */
-	txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
-	for (i = 0; i < 14; i++)
-		txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
-	/*
 	 * Initialize hw_mode information.
 	 */
 	spec->supported_bands = SUPPORT_BAND_2GHZ;
 	spec->supported_rates = SUPPORT_RATE_CCK;
-	spec->tx_power_a = NULL;
-	spec->tx_power_bg = txpower;
-	spec->tx_power_default = DEFAULT_TXPOWER;
 
-	spec->num_channels = ARRAY_SIZE(rf_vals_bg);
-	spec->channels = rf_vals_bg;
+	spec->num_channels = ARRAY_SIZE(rf_vals_b);
+	spec->channels = rf_vals_b;
+
+	/*
+	 * Create channel information array
+	 */
+	info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	spec->channels_info = info;
+
+	tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
+	for (i = 0; i < 14; i++)
+		info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+
+	return 0;
 }
 
 static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
@@ -1477,7 +1483,9 @@ static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Initialize hw specifications.
 	 */
-	rt2400pci_probe_hw_mode(rt2x00dev);
+	retval = rt2400pci_probe_hw_mode(rt2x00dev);
+	if (retval)
+		return retval;
 
 	/*
 	 * This device requires the atim queue and DMA-mapped skbs.
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h
index bc556425822..bbff381ce39 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.h
+++ b/drivers/net/wireless/rt2x00/rt2400pci.h
@@ -938,19 +938,13 @@
 #define MAX_TXPOWER	62
 #define DEFAULT_TXPOWER	39
 
-#define TXPOWER_FROM_DEV(__txpower)					\
-({									\
-	((__txpower) > MAX_TXPOWER) ? DEFAULT_TXPOWER - MIN_TXPOWER :	\
-	((__txpower) < MIN_TXPOWER) ? DEFAULT_TXPOWER - MIN_TXPOWER :	\
-	(((__txpower) - MAX_TXPOWER) + MIN_TXPOWER);			\
-})
-
-#define TXPOWER_TO_DEV(__txpower)			\
-({							\
-	(__txpower) += MIN_TXPOWER;			\
-	((__txpower) <= MIN_TXPOWER) ? MAX_TXPOWER :	\
-	(((__txpower) >= MAX_TXPOWER) ? MIN_TXPOWER :	\
-	(MAX_TXPOWER - ((__txpower) - MIN_TXPOWER)));	\
-})
+#define __CLAMP_TX(__txpower) \
+	clamp_t(char, (__txpower), MIN_TXPOWER, MAX_TXPOWER)
+
+#define TXPOWER_FROM_DEV(__txpower) \
+	((__CLAMP_TX(__txpower) - MAX_TXPOWER) + MIN_TXPOWER)
+
+#define TXPOWER_TO_DEV(__txpower) \
+	MAX_TXPOWER - (__CLAMP_TX(__txpower) - MIN_TXPOWER)
 
 #endif /* RT2400PCI_H */
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 181a146b476..ef42cc04a2d 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -231,7 +231,7 @@ static const struct rt2x00debug rt2500pci_rt2x00debug = {
 };
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 
-#ifdef CONFIG_RT2500PCI_RFKILL
+#ifdef CONFIG_RT2X00_LIB_RFKILL
 static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
@@ -241,9 +241,9 @@ static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 }
 #else
 #define rt2500pci_rfkill_poll	NULL
-#endif /* CONFIG_RT2500PCI_RFKILL */
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
 
-#ifdef CONFIG_RT2500PCI_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
 static void rt2500pci_brightness_set(struct led_classdev *led_cdev,
 				     enum led_brightness brightness)
 {
@@ -288,7 +288,7 @@ static void rt2500pci_init_led(struct rt2x00_dev *rt2x00dev,
 	led->led_dev.blink_set = rt2500pci_blink_set;
 	led->flags = LED_INITIALIZED;
 }
-#endif /* CONFIG_RT2500PCI_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
 
 /*
  * Configuration handlers.
@@ -1316,6 +1316,8 @@ static void rt2500pci_fill_rxdone(struct queue_entry *entry,
 
 	if (rt2x00_get_field32(word0, RXD_W0_OFDM))
 		rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
+	else
+		rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
 	if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
 		rxdesc->dev_flags |= RXDONE_MY_BSS;
 }
@@ -1377,7 +1379,7 @@ static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance)
 	if (!reg)
 		return IRQ_NONE;
 
-	if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 		return IRQ_HANDLED;
 
 	/*
@@ -1531,22 +1533,22 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Store led mode, for correct led behaviour.
 	 */
-#ifdef CONFIG_RT2500PCI_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
 
 	rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
 	if (value == LED_MODE_TXRX_ACTIVITY)
 		rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_qual,
 				   LED_TYPE_ACTIVITY);
-#endif /* CONFIG_RT2500PCI_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
 
 	/*
 	 * Detect if this device has an hardware controlled radio.
 	 */
-#ifdef CONFIG_RT2500PCI_RFKILL
+#ifdef CONFIG_RT2X00_LIB_RFKILL
 	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
 		__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT2500PCI_RFKILL */
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
 
 	/*
 	 * Check if the BBP tuning should be enabled.
@@ -1721,10 +1723,11 @@ static const struct rf_channel rf_vals_5222[] = {
 	{ 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
 };
 
-static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 {
 	struct hw_mode_spec *spec = &rt2x00dev->spec;
-	u8 *txpower;
+	struct channel_info *info;
+	char *tx_power;
 	unsigned int i;
 
 	/*
@@ -1741,20 +1744,10 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 						   EEPROM_MAC_ADDR_0));
 
 	/*
-	 * Convert tx_power array in eeprom.
-	 */
-	txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
-	for (i = 0; i < 14; i++)
-		txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
-	/*
 	 * Initialize hw_mode information.
 	 */
 	spec->supported_bands = SUPPORT_BAND_2GHZ;
 	spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
-	spec->tx_power_a = NULL;
-	spec->tx_power_bg = txpower;
-	spec->tx_power_default = DEFAULT_TXPOWER;
 
 	if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
 		spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
@@ -1776,6 +1769,26 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 		spec->num_channels = ARRAY_SIZE(rf_vals_5222);
 		spec->channels = rf_vals_5222;
 	}
+
+	/*
+	 * Create channel information array
+	 */
+	info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	spec->channels_info = info;
+
+	tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
+	for (i = 0; i < 14; i++)
+		info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+
+	if (spec->num_channels > 14) {
+		for (i = 14; i < spec->num_channels; i++)
+			info[i].tx_power1 = DEFAULT_TXPOWER;
+	}
+
+	return 0;
 }
 
 static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
@@ -1796,7 +1809,9 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Initialize hw specifications.
 	 */
-	rt2500pci_probe_hw_mode(rt2x00dev);
+	retval = rt2500pci_probe_hw_mode(rt2x00dev);
+	if (retval)
+		return retval;
 
 	/*
 	 * This device requires the atim queue and DMA-mapped skbs.
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h
index 42f376929ea..8c26bef6cf4 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.h
+++ b/drivers/net/wireless/rt2x00/rt2500pci.h
@@ -1223,17 +1223,10 @@
 #define MAX_TXPOWER	31
 #define DEFAULT_TXPOWER	24
 
-#define TXPOWER_FROM_DEV(__txpower)		\
-({						\
-	((__txpower) > MAX_TXPOWER) ?		\
-		DEFAULT_TXPOWER : (__txpower);	\
-})
-
-#define TXPOWER_TO_DEV(__txpower)			\
-({							\
-	((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER :	\
-	(((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER :	\
-	(__txpower));					\
-})
+#define TXPOWER_FROM_DEV(__txpower) \
+	(((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_TO_DEV(__txpower) \
+	clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
 
 #endif /* RT2500PCI_H */
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index cd5af656932..d3bf7bba611 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -288,7 +288,7 @@ static const struct rt2x00debug rt2500usb_rt2x00debug = {
 };
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 
-#ifdef CONFIG_RT2500USB_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
 static void rt2500usb_brightness_set(struct led_classdev *led_cdev,
 				     enum led_brightness brightness)
 {
@@ -333,7 +333,7 @@ static void rt2500usb_init_led(struct rt2x00_dev *rt2x00dev,
 	led->led_dev.blink_set = rt2500usb_blink_set;
 	led->flags = LED_INITIALIZED;
 }
-#endif /* CONFIG_RT2500USB_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
 
 /*
  * Configuration handlers.
@@ -384,7 +384,7 @@ static void rt2500usb_config_intf(struct rt2x00_dev *rt2x00dev,
 		rt2500usb_register_read(rt2x00dev, TXRX_CSR20, &reg);
 		rt2x00_set_field16(&reg, TXRX_CSR20_OFFSET, bcn_preload >> 6);
 		rt2x00_set_field16(&reg, TXRX_CSR20_BCN_EXPECT_WINDOW,
-				   2 * (conf->type != IEEE80211_IF_TYPE_STA));
+				   2 * (conf->type != NL80211_IFTYPE_STATION));
 		rt2500usb_register_write(rt2x00dev, TXRX_CSR20, reg);
 
 		/*
@@ -1114,8 +1114,7 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&word, TXD_W0_NEW_SEQ,
 			   test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags));
 	rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
-	rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT,
-			   skb->len - skbdesc->desc_len);
+	rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
 	rt2x00_set_field32(&word, TXD_W0_CIPHER, CIPHER_NONE);
 	rt2x00_desc_write(txd, 0, word);
 }
@@ -1134,7 +1133,6 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
 	int pipe = usb_sndbulkpipe(usb_dev, 1);
 	int length;
 	u16 reg;
-	u32 word, len;
 
 	/*
 	 * Add the descriptor in front of the skb.
@@ -1144,17 +1142,6 @@ static void rt2500usb_write_beacon(struct queue_entry *entry)
 	skbdesc->desc = entry->skb->data;
 
 	/*
-	 * Adjust the beacon databyte count. The current number is
-	 * calculated before this function gets called, but falsely
-	 * assumes that the descriptor was already present in the SKB.
-	 */
-	rt2x00_desc_read(skbdesc->desc, 0, &word);
-	len  = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT);
-	len += skbdesc->desc_len;
-	rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len);
-	rt2x00_desc_write(skbdesc->desc, 0, word);
-
-	/*
 	 * Disable beaconing while we are reloading the beacon data,
 	 * otherwise we might be sending out invalid data.
 	 */
@@ -1280,6 +1267,8 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry,
 
 	if (rt2x00_get_field32(word0, RXD_W0_OFDM))
 		rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
+	else
+		rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
 	if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
 		rxdesc->dev_flags |= RXDONE_MY_BSS;
 
@@ -1297,7 +1286,7 @@ static void rt2500usb_beacondone(struct urb *urb)
 	struct queue_entry *entry = (struct queue_entry *)urb->context;
 	struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data;
 
-	if (!test_bit(DEVICE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags))
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags))
 		return;
 
 	/*
@@ -1484,14 +1473,14 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Store led mode, for correct led behaviour.
 	 */
-#ifdef CONFIG_RT2500USB_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
 
 	rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
 	if (value == LED_MODE_TXRX_ACTIVITY)
 		rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_qual,
 				   LED_TYPE_ACTIVITY);
-#endif /* CONFIG_RT2500USB_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
 
 	/*
 	 * Check if the BBP tuning should be disabled.
@@ -1665,10 +1654,11 @@ static const struct rf_channel rf_vals_5222[] = {
 	{ 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
 };
 
-static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 {
 	struct hw_mode_spec *spec = &rt2x00dev->spec;
-	u8 *txpower;
+	struct channel_info *info;
+	char *tx_power;
 	unsigned int i;
 
 	/*
@@ -1687,20 +1677,10 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 						   EEPROM_MAC_ADDR_0));
 
 	/*
-	 * Convert tx_power array in eeprom.
-	 */
-	txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
-	for (i = 0; i < 14; i++)
-		txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
-	/*
 	 * Initialize hw_mode information.
 	 */
 	spec->supported_bands = SUPPORT_BAND_2GHZ;
 	spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
-	spec->tx_power_a = NULL;
-	spec->tx_power_bg = txpower;
-	spec->tx_power_default = DEFAULT_TXPOWER;
 
 	if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
 		spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
@@ -1722,6 +1702,26 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 		spec->num_channels = ARRAY_SIZE(rf_vals_5222);
 		spec->channels = rf_vals_5222;
 	}
+
+	/*
+	 * Create channel information array
+	 */
+	info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	spec->channels_info = info;
+
+	tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
+	for (i = 0; i < 14; i++)
+		info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+
+	if (spec->num_channels > 14) {
+		for (i = 14; i < spec->num_channels; i++)
+			info[i].tx_power1 = DEFAULT_TXPOWER;
+	}
+
+	return 0;
 }
 
 static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
@@ -1742,7 +1742,9 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Initialize hw specifications.
 	 */
-	rt2500usb_probe_hw_mode(rt2x00dev);
+	retval = rt2500usb_probe_hw_mode(rt2x00dev);
+	if (retval)
+		return retval;
 
 	/*
 	 * This device requires the atim queue
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h
index 4769ffeb4cc..89e5ed24e4f 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.h
+++ b/drivers/net/wireless/rt2x00/rt2500usb.h
@@ -825,17 +825,10 @@
 #define MAX_TXPOWER	31
 #define DEFAULT_TXPOWER	24
 
-#define TXPOWER_FROM_DEV(__txpower)		\
-({						\
-	((__txpower) > MAX_TXPOWER) ?		\
-		DEFAULT_TXPOWER : (__txpower);	\
-})
-
-#define TXPOWER_TO_DEV(__txpower)			\
-({							\
-	((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER :	\
-	(((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER :	\
-	(__txpower));					\
-})
+#define TXPOWER_FROM_DEV(__txpower) \
+	(((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_TO_DEV(__txpower) \
+	clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
 
 #endif /* RT2500USB_H */
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 8b10ea41b20..1359a376840 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -44,7 +44,7 @@
 /*
  * Module information.
  */
-#define DRV_VERSION	"2.1.8"
+#define DRV_VERSION	"2.2.1"
 #define DRV_PROJECT	"http://rt2x00.serialmonkey.com"
 
 /*
@@ -53,11 +53,11 @@
  */
 #define DEBUG_PRINTK_MSG(__dev, __kernlvl, __lvl, __msg, __args...)	\
 	printk(__kernlvl "%s -> %s: %s - " __msg,			\
-	       wiphy_name((__dev)->hw->wiphy), __FUNCTION__, __lvl, ##__args)
+	       wiphy_name((__dev)->hw->wiphy), __func__, __lvl, ##__args)
 
 #define DEBUG_PRINTK_PROBE(__kernlvl, __lvl, __msg, __args...)	\
 	printk(__kernlvl "%s -> %s: %s - " __msg,		\
-	       KBUILD_MODNAME, __FUNCTION__, __lvl, ##__args)
+	       KBUILD_MODNAME, __func__, __lvl, ##__args)
 
 #ifdef CONFIG_RT2X00_DEBUG
 #define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...)	\
@@ -144,6 +144,17 @@ struct rf_channel {
 };
 
 /*
+ * Channel information structure
+ */
+struct channel_info {
+	unsigned int flags;
+#define GEOGRAPHY_ALLOWED	0x00000001
+
+	short tx_power1;
+	short tx_power2;
+};
+
+/*
  * Antenna setup values.
  */
 struct antenna_setup {
@@ -394,10 +405,7 @@ static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif)
  * @num_channels: Number of supported channels. This is used as array size
  *	for @tx_power_a, @tx_power_bg and @channels.
  * @channels: Device/chipset specific channel values (See &struct rf_channel).
- * @tx_power_a: TX power values for all 5.2GHz channels (may be NULL).
- * @tx_power_bg: TX power values for all 2.4GHz channels (may be NULL).
- * @tx_power_default: Default TX power value to use when either
- *	@tx_power_a or @tx_power_bg is missing.
+ * @channels_info: Additional information for channels (See &struct channel_info).
  */
 struct hw_mode_spec {
 	unsigned int supported_bands;
@@ -410,10 +418,7 @@ struct hw_mode_spec {
 
 	unsigned int num_channels;
 	const struct rf_channel *channels;
-
-	const u8 *tx_power_a;
-	const u8 *tx_power_bg;
-	u8 tx_power_default;
+	const struct channel_info *channels_info;
 };
 
 /*
@@ -425,7 +430,9 @@ struct hw_mode_spec {
  */
 struct rt2x00lib_conf {
 	struct ieee80211_conf *conf;
+
 	struct rf_channel rf;
+	struct channel_info channel;
 
 	struct antenna_setup ant;
 
@@ -452,6 +459,23 @@ struct rt2x00lib_erp {
 };
 
 /*
+ * Configuration structure for hardware encryption.
+ */
+struct rt2x00lib_crypto {
+	enum cipher cipher;
+
+	enum set_key_cmd cmd;
+	const u8 *address;
+
+	u32 bssidx;
+	u32 aid;
+
+	u8 key[16];
+	u8 tx_mic[8];
+	u8 rx_mic[8];
+};
+
+/*
  * Configuration structure wrapper around the
  * rt2x00 interface configuration handler.
  */
@@ -459,7 +483,7 @@ struct rt2x00intf_conf {
 	/*
 	 * Interface type
 	 */
-	enum ieee80211_if_types type;
+	enum nl80211_iftype type;
 
 	/*
 	 * TSF sync value, this is dependant on the operation type.
@@ -547,6 +571,12 @@ struct rt2x00lib_ops {
 	/*
 	 * Configuration handlers.
 	 */
+	int (*config_shared_key) (struct rt2x00_dev *rt2x00dev,
+				  struct rt2x00lib_crypto *crypto,
+				  struct ieee80211_key_conf *key);
+	int (*config_pairwise_key) (struct rt2x00_dev *rt2x00dev,
+				    struct rt2x00lib_crypto *crypto,
+				    struct ieee80211_key_conf *key);
 	void (*config_filter) (struct rt2x00_dev *rt2x00dev,
 			       const unsigned int filter_flags);
 	void (*config_intf) (struct rt2x00_dev *rt2x00dev,
@@ -599,17 +629,16 @@ enum rt2x00_flags {
 	/*
 	 * Device state flags
 	 */
-	DEVICE_PRESENT,
-	DEVICE_REGISTERED_HW,
-	DEVICE_INITIALIZED,
-	DEVICE_STARTED,
-	DEVICE_STARTED_SUSPEND,
-	DEVICE_ENABLED_RADIO,
-	DEVICE_DISABLED_RADIO_HW,
-	DEVICE_DIRTY_CONFIG,
+	DEVICE_STATE_PRESENT,
+	DEVICE_STATE_REGISTERED_HW,
+	DEVICE_STATE_INITIALIZED,
+	DEVICE_STATE_STARTED,
+	DEVICE_STATE_STARTED_SUSPEND,
+	DEVICE_STATE_ENABLED_RADIO,
+	DEVICE_STATE_DISABLED_RADIO_HW,
 
 	/*
-	 * Driver features
+	 * Driver requirements
 	 */
 	DRIVER_REQUIRE_FIRMWARE,
 	DRIVER_REQUIRE_BEACON_GUARD,
@@ -618,9 +647,14 @@ enum rt2x00_flags {
 	DRIVER_REQUIRE_DMA,
 
 	/*
-	 * Driver configuration
+	 * Driver features
 	 */
 	CONFIG_SUPPORT_HW_BUTTON,
+	CONFIG_SUPPORT_HW_CRYPTO,
+
+	/*
+	 * Driver configuration
+	 */
 	CONFIG_FRAME_TYPE,
 	CONFIG_RF_SEQUENCE,
 	CONFIG_EXTERNAL_LNA_A,
@@ -769,6 +803,11 @@ struct rt2x00_dev {
 	u32 *rf;
 
 	/*
+	 * LNA gain
+	 */
+	short lna_gain;
+
+	/*
 	 * USB Max frame size (for rt2500usb & rt73usb).
 	 */
 	u16 usb_maxpacket;
@@ -966,6 +1005,13 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
 				unsigned int changed_flags,
 				unsigned int *total_flags,
 				int mc_count, struct dev_addr_list *mc_list);
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+		      const u8 *local_address, const u8 *address,
+		      struct ieee80211_key_conf *key);
+#else
+#define rt2x00mac_set_key	NULL
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
 int rt2x00mac_get_stats(struct ieee80211_hw *hw,
 			struct ieee80211_low_level_stats *stats);
 int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index d134c3be539..4d5e87b015a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -31,7 +31,7 @@
 
 void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev,
 			   struct rt2x00_intf *intf,
-			   enum ieee80211_if_types type,
+			   enum nl80211_iftype type,
 			   u8 *mac, u8 *bssid)
 {
 	struct rt2x00intf_conf conf;
@@ -40,11 +40,11 @@ void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev,
 	conf.type = type;
 
 	switch (type) {
-	case IEEE80211_IF_TYPE_IBSS:
-	case IEEE80211_IF_TYPE_AP:
+	case NL80211_IFTYPE_ADHOC:
+	case NL80211_IFTYPE_AP:
 		conf.sync = TSF_SYNC_BEACON;
 		break;
-	case IEEE80211_IF_TYPE_STA:
+	case NL80211_IFTYPE_STATION:
 		conf.sync = TSF_SYNC_INFRA;
 		break;
 	default:
@@ -121,7 +121,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
 	 * Antenna setup changes require the RX to be disabled,
 	 * else the changes will be ignored by the device.
 	 */
-	if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+	if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 		rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF_LINK);
 
 	/*
@@ -136,7 +136,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
 	rt2x00dev->link.ant.active.rx = libconf.ant.rx;
 	rt2x00dev->link.ant.active.tx = libconf.ant.tx;
 
-	if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+	if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 		rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK);
 }
 
@@ -245,6 +245,10 @@ config:
 		memcpy(&libconf.rf,
 		       &rt2x00dev->spec.channels[conf->channel->hw_value],
 		       sizeof(libconf.rf));
+
+		memcpy(&libconf.channel,
+		       &rt2x00dev->spec.channels_info[conf->channel->hw_value],
+		       sizeof(libconf.channel));
 	}
 
 	if (flags & CONFIG_UPDATE_ANTENNA) {
diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c
new file mode 100644
index 00000000000..5a858e5106c
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c
@@ -0,0 +1,215 @@
+/*
+	Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2x00lib
+	Abstract: rt2x00 crypto specific routines.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "rt2x00.h"
+#include "rt2x00lib.h"
+
+enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key)
+{
+	switch (key->alg) {
+	case ALG_WEP:
+		if (key->keylen == LEN_WEP40)
+			return CIPHER_WEP64;
+		else
+			return CIPHER_WEP128;
+	case ALG_TKIP:
+		return CIPHER_TKIP;
+	case ALG_CCMP:
+		return CIPHER_AES;
+	default:
+		return CIPHER_NONE;
+	}
+}
+
+unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info)
+{
+	struct ieee80211_key_conf *key = tx_info->control.hw_key;
+	unsigned int overhead = 0;
+
+	/*
+	 * Extend frame length to include IV/EIV/ICV/MMIC,
+	 * note that these lengths should only be added when
+	 * mac80211 does not generate it.
+	 */
+	overhead += key->icv_len;
+
+	if (!(key->flags & IEEE80211_KEY_FLAG_GENERATE_IV))
+		overhead += key->iv_len;
+
+	if (!(key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC)) {
+		if (key->alg == ALG_TKIP)
+			overhead += 8;
+	}
+
+	return overhead;
+}
+
+void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len)
+{
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
+	unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb);
+
+	if (unlikely(!iv_len))
+		return;
+
+	/* Copy IV/EIV data */
+	if (iv_len >= 4)
+		memcpy(&skbdesc->iv, skb->data + header_length, 4);
+	if (iv_len >= 8)
+		memcpy(&skbdesc->eiv, skb->data + header_length + 4, 4);
+
+	/* Move ieee80211 header */
+	memmove(skb->data + iv_len, skb->data, header_length);
+
+	/* Pull buffer to correct size */
+	skb_pull(skb, iv_len);
+
+	/* IV/EIV data has officially be stripped */
+	skbdesc->flags |= FRAME_DESC_IV_STRIPPED;
+}
+
+void rt2x00crypto_tx_insert_iv(struct sk_buff *skb)
+{
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
+	unsigned int header_length = ieee80211_get_hdrlen_from_skb(skb);
+	const unsigned int iv_len =
+	    ((!!(skbdesc->iv)) * 4) + ((!!(skbdesc->eiv)) * 4);
+
+	if (!(skbdesc->flags & FRAME_DESC_IV_STRIPPED))
+		return;
+
+	skb_push(skb, iv_len);
+
+	/* Move ieee80211 header */
+	memmove(skb->data, skb->data + iv_len, header_length);
+
+	/* Copy IV/EIV data */
+	if (iv_len >= 4)
+		memcpy(skb->data + header_length, &skbdesc->iv, 4);
+	if (iv_len >= 8)
+		memcpy(skb->data + header_length + 4, &skbdesc->eiv, 4);
+
+	/* IV/EIV data has returned into the frame */
+	skbdesc->flags &= ~FRAME_DESC_IV_STRIPPED;
+}
+
+void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
+			       unsigned int header_length,
+			       struct rxdone_entry_desc *rxdesc)
+{
+	unsigned int payload_len = rxdesc->size - header_length;
+	unsigned int iv_len;
+	unsigned int icv_len;
+	unsigned int transfer = 0;
+
+	/*
+	 * WEP64/WEP128: Provides IV & ICV
+	 * TKIP: Provides IV/EIV & ICV
+	 * AES: Provies IV/EIV & ICV
+	 */
+	switch (rxdesc->cipher) {
+	case CIPHER_WEP64:
+	case CIPHER_WEP128:
+		iv_len = 4;
+		icv_len = 4;
+		break;
+	case CIPHER_TKIP:
+		iv_len = 8;
+		icv_len = 4;
+		break;
+	case CIPHER_AES:
+		iv_len = 8;
+		icv_len = 8;
+		break;
+	default:
+		/* Unsupport type */
+		return;
+	}
+
+	/*
+	 * Make room for new data, note that we increase both
+	 * headsize and tailsize when required. The tailsize is
+	 * only needed when ICV data needs to be inserted and
+	 * the padding is smaller then the ICV data.
+	 * When alignment requirements is greater then the
+	 * ICV data we must trim the skb to the correct size
+	 * because we need to remove the extra bytes.
+	 */
+	skb_push(skb, iv_len + align);
+	if (align < icv_len)
+		skb_put(skb, icv_len - align);
+	else if (align > icv_len)
+		skb_trim(skb, rxdesc->size + iv_len + icv_len);
+
+	/* Move ieee80211 header */
+	memmove(skb->data + transfer,
+		skb->data + transfer + iv_len + align,
+		header_length);
+	transfer += header_length;
+
+	/* Copy IV data */
+	if (iv_len >= 4) {
+		memcpy(skb->data + transfer, &rxdesc->iv, 4);
+		transfer += 4;
+	}
+
+	/* Copy EIV data */
+	if (iv_len >= 8) {
+		memcpy(skb->data + transfer, &rxdesc->eiv, 4);
+		transfer += 4;
+	}
+
+	/* Move payload */
+	if (align) {
+		memmove(skb->data + transfer,
+			skb->data + transfer + align,
+			payload_len);
+	}
+
+	/*
+	 * NOTE: Always count the payload as transfered,
+	 * even when alignment was set to zero. This is required
+	 * for determining the correct offset for the ICV data.
+	 */
+	transfer += payload_len;
+
+	/* Copy ICV data */
+	if (icv_len >= 4) {
+		memcpy(skb->data + transfer, &rxdesc->icv, 4);
+		/*
+		 * AES appends 8 bytes, we can't fill the upper
+		 * 4 bytes, but mac80211 doesn't care about what
+		 * we provide here anyway and strips it immediately.
+		 */
+		transfer += icv_len;
+	}
+
+	/* IV/EIV/ICV has been inserted into frame */
+	rxdesc->size = transfer;
+	rxdesc->flags &= ~RX_FLAG_IV_STRIPPED;
+}
diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c
index 6bee1d611bb..5cf4c859e39 100644
--- a/drivers/net/wireless/rt2x00/rt2x00debug.c
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
@@ -35,6 +35,13 @@
 
 #define MAX_LINE_LENGTH 64
 
+struct rt2x00debug_crypto {
+	unsigned long success;
+	unsigned long icv_error;
+	unsigned long mic_error;
+	unsigned long key_error;
+};
+
 struct rt2x00debug_intf {
 	/*
 	 * Pointer to driver structure where
@@ -63,6 +70,7 @@ struct rt2x00debug_intf {
 	 *   - queue folder
 	 *     - frame dump file
 	 *     - queue stats file
+	 *     - crypto stats file
 	 */
 	struct dentry *driver_folder;
 	struct dentry *driver_entry;
@@ -80,6 +88,7 @@ struct rt2x00debug_intf {
 	struct dentry *queue_folder;
 	struct dentry *queue_frame_dump_entry;
 	struct dentry *queue_stats_entry;
+	struct dentry *crypto_stats_entry;
 
 	/*
 	 * The frame dump file only allows a single reader,
@@ -98,6 +107,12 @@ struct rt2x00debug_intf {
 	wait_queue_head_t frame_dump_waitqueue;
 
 	/*
+	 * HW crypto statistics.
+	 * All statistics are stored seperately per cipher type.
+	 */
+	struct rt2x00debug_crypto crypto_stats[CIPHER_MAX];
+
+	/*
 	 * Driver and chipset files will use a data buffer
 	 * that has been created in advance. This will simplify
 	 * the code since we can use the debugfs functions.
@@ -114,6 +129,25 @@ struct rt2x00debug_intf {
 	unsigned int offset_rf;
 };
 
+void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
+			       enum cipher cipher, enum rx_crypto status)
+{
+	struct rt2x00debug_intf *intf = rt2x00dev->debugfs_intf;
+
+	if (cipher == CIPHER_TKIP_NO_MIC)
+		cipher = CIPHER_TKIP;
+	if (cipher == CIPHER_NONE || cipher > CIPHER_MAX)
+		return;
+
+	/* Remove CIPHER_NONE index */
+	cipher--;
+
+	intf->crypto_stats[cipher].success += (status == RX_CRYPTO_SUCCESS);
+	intf->crypto_stats[cipher].icv_error += (status == RX_CRYPTO_FAIL_ICV);
+	intf->crypto_stats[cipher].mic_error += (status == RX_CRYPTO_FAIL_MIC);
+	intf->crypto_stats[cipher].key_error += (status == RX_CRYPTO_FAIL_KEY);
+}
+
 void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
 			    enum rt2x00_dump_type type, struct sk_buff *skb)
 {
@@ -327,6 +361,59 @@ static const struct file_operations rt2x00debug_fop_queue_stats = {
 	.release	= rt2x00debug_file_release,
 };
 
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+static ssize_t rt2x00debug_read_crypto_stats(struct file *file,
+					     char __user *buf,
+					     size_t length,
+					     loff_t *offset)
+{
+	struct rt2x00debug_intf *intf = file->private_data;
+	char *name[] = { "WEP64", "WEP128", "TKIP", "AES" };
+	char *data;
+	char *temp;
+	size_t size;
+	unsigned int i;
+
+	if (*offset)
+		return 0;
+
+	data = kzalloc((1 + CIPHER_MAX)* MAX_LINE_LENGTH, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	temp = data;
+	temp += sprintf(data, "cipher\tsuccess\ticv err\tmic err\tkey err\n");
+
+	for (i = 0; i < CIPHER_MAX; i++) {
+		temp += sprintf(temp, "%s\t%lu\t%lu\t%lu\t%lu\n", name[i],
+				intf->crypto_stats[i].success,
+				intf->crypto_stats[i].icv_error,
+				intf->crypto_stats[i].mic_error,
+				intf->crypto_stats[i].key_error);
+	}
+
+	size = strlen(data);
+	size = min(size, length);
+
+	if (copy_to_user(buf, data, size)) {
+		kfree(data);
+		return -EFAULT;
+	}
+
+	kfree(data);
+
+	*offset += size;
+	return size;
+}
+
+static const struct file_operations rt2x00debug_fop_crypto_stats = {
+	.owner		= THIS_MODULE,
+	.read		= rt2x00debug_read_crypto_stats,
+	.open		= rt2x00debug_file_open,
+	.release	= rt2x00debug_file_release,
+};
+#endif
+
 #define RT2X00DEBUGFS_OPS_READ(__name, __format, __type)	\
 static ssize_t rt2x00debug_read_##__name(struct file *file,	\
 					 char __user *buf,	\
@@ -569,6 +656,13 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
 	    debugfs_create_file("queue", S_IRUSR, intf->queue_folder,
 				intf, &rt2x00debug_fop_queue_stats);
 
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
+		intf->crypto_stats_entry =
+		    debugfs_create_file("crypto", S_IRUGO, intf->queue_folder,
+					intf, &rt2x00debug_fop_crypto_stats);
+#endif
+
 	return;
 
 exit:
@@ -587,6 +681,9 @@ void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev)
 
 	skb_queue_purge(&intf->frame_dump_skbqueue);
 
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+	debugfs_remove(intf->crypto_stats_entry);
+#endif
 	debugfs_remove(intf->queue_stats_entry);
 	debugfs_remove(intf->queue_frame_dump_entry);
 	debugfs_remove(intf->queue_folder);
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index f42283ad7b0..86840e3585e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -34,7 +34,7 @@
  */
 void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev)
 {
-	if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 		return;
 
 	/*
@@ -94,8 +94,8 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
 	 * Don't enable the radio twice.
 	 * And check if the hardware button has been disabled.
 	 */
-	if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
-	    test_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags))
+	if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) ||
+	    test_bit(DEVICE_STATE_DISABLED_RADIO_HW, &rt2x00dev->flags))
 		return 0;
 
 	/*
@@ -117,7 +117,7 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
 	rt2x00leds_led_radio(rt2x00dev, true);
 	rt2x00led_led_activity(rt2x00dev, true);
 
-	__set_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags);
+	set_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags);
 
 	/*
 	 * Enable RX.
@@ -134,7 +134,7 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
 
 void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
 {
-	if (!__test_and_clear_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+	if (!test_and_clear_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 		return;
 
 	/*
@@ -354,7 +354,7 @@ static void rt2x00lib_link_tuner(struct work_struct *work)
 	 * When the radio is shutting down we should
 	 * immediately cease all link tuning.
 	 */
-	if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 		return;
 
 	/*
@@ -431,7 +431,7 @@ static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac,
 	 * note that in the spinlock protected area above the delayed_flags
 	 * have been cleared correctly.
 	 */
-	if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 		return;
 
 	if (delayed_flags & DELAYED_UPDATE_BEACON)
@@ -467,8 +467,8 @@ static void rt2x00lib_beacondone_iter(void *data, u8 *mac,
 	struct rt2x00_dev *rt2x00dev = data;
 	struct rt2x00_intf *intf = vif_to_intf(vif);
 
-	if (vif->type != IEEE80211_IF_TYPE_AP &&
-	    vif->type != IEEE80211_IF_TYPE_IBSS)
+	if (vif->type != NL80211_IFTYPE_AP &&
+	    vif->type != NL80211_IFTYPE_ADHOC)
 		return;
 
 	/*
@@ -484,7 +484,7 @@ static void rt2x00lib_beacondone_iter(void *data, u8 *mac,
 
 void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)
 {
-	if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 		return;
 
 	ieee80211_iterate_active_interfaces_atomic(rt2x00dev->hw,
@@ -508,6 +508,15 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	rt2x00queue_unmap_skb(rt2x00dev, entry->skb);
 
 	/*
+	 * If the IV/EIV data was stripped from the frame before it was
+	 * passed to the hardware, we should now reinsert it again because
+	 * mac80211 will expect the the same data to be present it the
+	 * frame as it was passed to us.
+	 */
+	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
+		rt2x00crypto_tx_insert_iv(entry->skb);
+
+	/*
 	 * Send frame to debugfs immediately, after this call is completed
 	 * we are going to overwrite the skb->cb array.
 	 */
@@ -563,7 +572,7 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 
 	rt2x00dev->ops->lib->init_txentry(rt2x00dev, entry);
 
-	__clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
+	clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
 	rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE);
 
 	/*
@@ -585,7 +594,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_hdr *hdr;
 	const struct rt2x00_rate *rate;
-	unsigned int header_size;
+	unsigned int header_length;
 	unsigned int align;
 	unsigned int i;
 	int idx = -1;
@@ -613,10 +622,19 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 	 * The data behind the ieee80211 header must be
 	 * aligned on a 4 byte boundary.
 	 */
-	header_size = ieee80211_get_hdrlen_from_skb(entry->skb);
-	align = ((unsigned long)(entry->skb->data + header_size)) & 3;
+	header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
+	align = ((unsigned long)(entry->skb->data + header_length)) & 3;
 
-	if (align) {
+	/*
+	 * Hardware might have stripped the IV/EIV/ICV data,
+	 * in that case it is possible that the data was
+	 * provided seperately (through hardware descriptor)
+	 * in which case we should reinsert the data into the frame.
+	 */
+	if ((rxdesc.flags & RX_FLAG_IV_STRIPPED)) {
+		rt2x00crypto_rx_insert_iv(entry->skb, align,
+					  header_length, &rxdesc);
+	} else if (align) {
 		skb_push(entry->skb, align);
 		/* Move entire frame in 1 command */
 		memmove(entry->skb->data, entry->skb->data + align,
@@ -635,7 +653,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 
 		if (((rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) &&
 		     (rate->plcp == rxdesc.signal)) ||
-		    (!(rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) &&
+		    ((rxdesc.dev_flags & RXDONE_SIGNAL_BITRATE) &&
 		      (rate->bitrate == rxdesc.signal))) {
 			idx = i;
 			break;
@@ -657,6 +675,10 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 	    (rxdesc.dev_flags & RXDONE_MY_BSS))
 		rt2x00lib_update_link_stats(&rt2x00dev->link, rxdesc.rssi);
 
+	rt2x00debug_update_crypto(rt2x00dev,
+				  rxdesc.cipher,
+				  rxdesc.cipher_status);
+
 	rt2x00dev->link.qual.rx_success++;
 
 	rx_status->mactime = rxdesc.timestamp;
@@ -796,7 +818,6 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
 	struct ieee80211_rate *rates;
 	unsigned int num_rates;
 	unsigned int i;
-	unsigned char tx_power;
 
 	num_rates = 0;
 	if (spec->supported_rates & SUPPORT_RATE_CCK)
@@ -822,20 +843,9 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
 	 * Initialize Channel list.
 	 */
 	for (i = 0; i < spec->num_channels; i++) {
-		if (spec->channels[i].channel <= 14) {
-			if (spec->tx_power_bg)
-				tx_power = spec->tx_power_bg[i];
-			else
-				tx_power = spec->tx_power_default;
-		} else {
-			if (spec->tx_power_a)
-				tx_power = spec->tx_power_a[i];
-			else
-				tx_power = spec->tx_power_default;
-		}
-
 		rt2x00lib_channel(&channels[i],
-				  spec->channels[i].channel, tx_power, i);
+				  spec->channels[i].channel,
+				  spec->channels_info[i].tx_power1, i);
 	}
 
 	/*
@@ -878,7 +888,7 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
 
 static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev)
 {
-	if (test_bit(DEVICE_REGISTERED_HW, &rt2x00dev->flags))
+	if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags))
 		ieee80211_unregister_hw(rt2x00dev->hw);
 
 	if (likely(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ])) {
@@ -887,6 +897,8 @@ static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev)
 		rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
 		rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
 	}
+
+	kfree(rt2x00dev->spec.channels_info);
 }
 
 static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
@@ -894,6 +906,9 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
 	struct hw_mode_spec *spec = &rt2x00dev->spec;
 	int status;
 
+	if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags))
+		return 0;
+
 	/*
 	 * Initialize HW modes.
 	 */
@@ -915,7 +930,7 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
 		return status;
 	}
 
-	__set_bit(DEVICE_REGISTERED_HW, &rt2x00dev->flags);
+	set_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags);
 
 	return 0;
 }
@@ -925,7 +940,7 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
  */
 static void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev)
 {
-	if (!__test_and_clear_bit(DEVICE_INITIALIZED, &rt2x00dev->flags))
+	if (!test_and_clear_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags))
 		return;
 
 	/*
@@ -948,7 +963,7 @@ static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev)
 {
 	int status;
 
-	if (test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags))
+	if (test_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags))
 		return 0;
 
 	/*
@@ -967,7 +982,7 @@ static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev)
 		return status;
 	}
 
-	__set_bit(DEVICE_INITIALIZED, &rt2x00dev->flags);
+	set_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags);
 
 	/*
 	 * Register the extra components.
@@ -981,7 +996,7 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
 
-	if (test_bit(DEVICE_STARTED, &rt2x00dev->flags))
+	if (test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
 		return 0;
 
 	/*
@@ -999,28 +1014,18 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
 	if (retval)
 		return retval;
 
-	/*
-	 * Enable radio.
-	 */
-	retval = rt2x00lib_enable_radio(rt2x00dev);
-	if (retval) {
-		rt2x00lib_uninitialize(rt2x00dev);
-		return retval;
-	}
-
 	rt2x00dev->intf_ap_count = 0;
 	rt2x00dev->intf_sta_count = 0;
 	rt2x00dev->intf_associated = 0;
 
-	__set_bit(DEVICE_STARTED, &rt2x00dev->flags);
-	__set_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags);
+	set_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags);
 
 	return 0;
 }
 
 void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev)
 {
-	if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags))
+	if (!test_and_clear_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
 		return;
 
 	/*
@@ -1032,8 +1037,6 @@ void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev)
 	rt2x00dev->intf_ap_count = 0;
 	rt2x00dev->intf_sta_count = 0;
 	rt2x00dev->intf_associated = 0;
-
-	__clear_bit(DEVICE_STARTED, &rt2x00dev->flags);
 }
 
 /*
@@ -1049,6 +1052,11 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
 	 */
 	rt2x00dev->hw->vif_data_size = sizeof(struct rt2x00_intf);
 
+	rt2x00dev->hw->wiphy->interface_modes =
+	    BIT(NL80211_IFTYPE_AP) |
+	    BIT(NL80211_IFTYPE_STATION) |
+	    BIT(NL80211_IFTYPE_ADHOC);
+
 	/*
 	 * Let the driver probe the device to detect the capabilities.
 	 */
@@ -1088,7 +1096,7 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
 	rt2x00rfkill_allocate(rt2x00dev);
 	rt2x00debug_register(rt2x00dev);
 
-	__set_bit(DEVICE_PRESENT, &rt2x00dev->flags);
+	set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
 
 	return 0;
 
@@ -1101,7 +1109,7 @@ EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev);
 
 void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
 {
-	__clear_bit(DEVICE_PRESENT, &rt2x00dev->flags);
+	clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
 
 	/*
 	 * Disable radio.
@@ -1146,14 +1154,15 @@ int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state)
 	int retval;
 
 	NOTICE(rt2x00dev, "Going to sleep.\n");
-	__clear_bit(DEVICE_PRESENT, &rt2x00dev->flags);
 
 	/*
 	 * Only continue if mac80211 has open interfaces.
 	 */
-	if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags))
+	if (!test_and_clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
+	    !test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
 		goto exit;
-	__set_bit(DEVICE_STARTED_SUSPEND, &rt2x00dev->flags);
+
+	set_bit(DEVICE_STATE_STARTED_SUSPEND, &rt2x00dev->flags);
 
 	/*
 	 * Disable radio.
@@ -1203,8 +1212,8 @@ static void rt2x00lib_resume_intf(void *data, u8 *mac,
 	/*
 	 * Master or Ad-hoc mode require a new beacon update.
 	 */
-	if (vif->type == IEEE80211_IF_TYPE_AP ||
-	    vif->type == IEEE80211_IF_TYPE_IBSS)
+	if (vif->type == NL80211_IFTYPE_AP ||
+	    vif->type == NL80211_IFTYPE_ADHOC)
 		intf->delayed_flags |= DELAYED_UPDATE_BEACON;
 
 	spin_unlock(&intf->lock);
@@ -1225,7 +1234,7 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Only continue if mac80211 had open interfaces.
 	 */
-	if (!__test_and_clear_bit(DEVICE_STARTED_SUSPEND, &rt2x00dev->flags))
+	if (!test_and_clear_bit(DEVICE_STATE_STARTED_SUSPEND, &rt2x00dev->flags))
 		return 0;
 
 	/*
@@ -1252,7 +1261,7 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * We are ready again to receive requests from mac80211.
 	 */
-	__set_bit(DEVICE_PRESENT, &rt2x00dev->flags);
+	set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
 
 	/*
 	 * It is possible that during that mac80211 has attempted
@@ -1272,7 +1281,7 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
 	return 0;
 
 exit:
-	rt2x00lib_disable_radio(rt2x00dev);
+	rt2x00lib_stop(rt2x00dev);
 	rt2x00lib_uninitialize(rt2x00dev);
 	rt2x00debug_deregister(rt2x00dev);
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index c5fb3a72cf3..797eb619aa0 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -88,7 +88,7 @@ void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev);
  */
 void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev,
 			   struct rt2x00_intf *intf,
-			   enum ieee80211_if_types type,
+			   enum nl80211_iftype type,
 			   u8 *mac, u8 *bssid);
 void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev,
 			  struct rt2x00_intf *intf,
@@ -181,6 +181,8 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev);
 void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev);
 void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
 			    enum rt2x00_dump_type type, struct sk_buff *skb);
+void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
+			       enum cipher cipher, enum rx_crypto status);
 #else
 static inline void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
 {
@@ -195,9 +197,54 @@ static inline void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
 					  struct sk_buff *skb)
 {
 }
+
+static inline void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
+					     enum cipher cipher,
+					     enum rx_crypto status)
+{
+}
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 
 /*
+ * Crypto handlers.
+ */
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key);
+unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info);
+void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, unsigned int iv_len);
+void rt2x00crypto_tx_insert_iv(struct sk_buff *skb);
+void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
+			       unsigned int header_length,
+			       struct rxdone_entry_desc *rxdesc);
+#else
+static inline enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key)
+{
+	return CIPHER_NONE;
+}
+
+static inline unsigned int rt2x00crypto_tx_overhead(struct ieee80211_tx_info *tx_info)
+{
+	return 0;
+}
+
+static inline void rt2x00crypto_tx_remove_iv(struct sk_buff *skb,
+					     unsigned int iv_len)
+{
+}
+
+static inline void rt2x00crypto_tx_insert_iv(struct sk_buff *skb)
+{
+}
+
+static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb,
+					     unsigned int align,
+					     unsigned int header_length,
+					     struct rxdone_entry_desc *rxdesc)
+{
+}
+#endif
+
+/*
  * RFkill handlers.
  */
 #ifdef CONFIG_RT2X00_LIB_RFKILL
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index d0650738863..2c6cc5c374f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -36,21 +36,22 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(frag_skb);
 	struct ieee80211_tx_info *rts_info;
 	struct sk_buff *skb;
-	int size;
+	unsigned int data_length;
+	int retval = 0;
 
 	if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
-		size = sizeof(struct ieee80211_cts);
+		data_length = sizeof(struct ieee80211_cts);
 	else
-		size = sizeof(struct ieee80211_rts);
+		data_length = sizeof(struct ieee80211_rts);
 
-	skb = dev_alloc_skb(size + rt2x00dev->hw->extra_tx_headroom);
-	if (!skb) {
+	skb = dev_alloc_skb(data_length + rt2x00dev->hw->extra_tx_headroom);
+	if (unlikely(!skb)) {
 		WARNING(rt2x00dev, "Failed to create RTS/CTS frame.\n");
-		return NETDEV_TX_BUSY;
+		return -ENOMEM;
 	}
 
 	skb_reserve(skb, rt2x00dev->hw->extra_tx_headroom);
-	skb_put(skb, size);
+	skb_put(skb, data_length);
 
 	/*
 	 * Copy TX information over from original frame to
@@ -63,7 +64,6 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
 	 */
 	memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb));
 	rts_info = IEEE80211_SKB_CB(skb);
-	rts_info->control.hw_key = NULL;
 	rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS;
 	rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT;
 	rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS;
@@ -73,22 +73,33 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
 	else
 		rts_info->flags &= ~IEEE80211_TX_CTL_NO_ACK;
 
+	skb->do_not_encrypt = 1;
+
+	/*
+	 * RTS/CTS frame should use the length of the frame plus any
+	 * encryption overhead that will be added by the hardware.
+	 */
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+	if (!frag_skb->do_not_encrypt)
+		data_length += rt2x00crypto_tx_overhead(tx_info);
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
+
 	if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
 		ieee80211_ctstoself_get(rt2x00dev->hw, tx_info->control.vif,
-					frag_skb->data, size, tx_info,
+					frag_skb->data, data_length, tx_info,
 					(struct ieee80211_cts *)(skb->data));
 	else
 		ieee80211_rts_get(rt2x00dev->hw, tx_info->control.vif,
-				  frag_skb->data, size, tx_info,
+				  frag_skb->data, data_length, tx_info,
 				  (struct ieee80211_rts *)(skb->data));
 
-	if (rt2x00queue_write_tx_frame(queue, skb)) {
+	retval = rt2x00queue_write_tx_frame(queue, skb);
+	if (retval) {
 		dev_kfree_skb_any(skb);
 		WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n");
-		return NETDEV_TX_BUSY;
 	}
 
-	return NETDEV_TX_OK;
+	return retval;
 }
 
 int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
@@ -106,11 +117,8 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	 * Note that we can only stop the TX queues inside the TX path
 	 * due to possible race conditions in mac80211.
 	 */
-	if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) {
-		ieee80211_stop_queues(hw);
-		dev_kfree_skb_any(skb);
-		return NETDEV_TX_OK;
-	}
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+		goto exit_fail;
 
 	/*
 	 * Determine which queue to put packet on.
@@ -141,26 +149,25 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	if ((tx_info->flags & (IEEE80211_TX_CTL_USE_RTS_CTS |
 			       IEEE80211_TX_CTL_USE_CTS_PROTECT)) &&
 	    !rt2x00dev->ops->hw->set_rts_threshold) {
-		if (rt2x00queue_available(queue) <= 1) {
-			ieee80211_stop_queue(rt2x00dev->hw, qid);
-			return NETDEV_TX_BUSY;
-		}
-
-		if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb)) {
-			ieee80211_stop_queue(rt2x00dev->hw, qid);
-			return NETDEV_TX_BUSY;
-		}
-	}
+		if (rt2x00queue_available(queue) <= 1)
+			goto exit_fail;
 
-	if (rt2x00queue_write_tx_frame(queue, skb)) {
-		ieee80211_stop_queue(rt2x00dev->hw, qid);
-		return NETDEV_TX_BUSY;
+		if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb))
+			goto exit_fail;
 	}
 
+	if (rt2x00queue_write_tx_frame(queue, skb))
+		goto exit_fail;
+
 	if (rt2x00queue_threshold(queue))
 		ieee80211_stop_queue(rt2x00dev->hw, qid);
 
 	return NETDEV_TX_OK;
+
+ exit_fail:
+	ieee80211_stop_queue(rt2x00dev->hw, qid);
+	dev_kfree_skb_any(skb);
+	return NETDEV_TX_OK;
 }
 EXPORT_SYMBOL_GPL(rt2x00mac_tx);
 
@@ -168,7 +175,7 @@ int rt2x00mac_start(struct ieee80211_hw *hw)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 
-	if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
 		return 0;
 
 	return rt2x00lib_start(rt2x00dev);
@@ -179,7 +186,7 @@ void rt2x00mac_stop(struct ieee80211_hw *hw)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 
-	if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
 		return;
 
 	rt2x00lib_stop(rt2x00dev);
@@ -199,12 +206,12 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 	 * Don't allow interfaces to be added
 	 * the device has disappeared.
 	 */
-	if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) ||
-	    !test_bit(DEVICE_STARTED, &rt2x00dev->flags))
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
+	    !test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
 		return -ENODEV;
 
 	switch (conf->type) {
-	case IEEE80211_IF_TYPE_AP:
+	case NL80211_IFTYPE_AP:
 		/*
 		 * We don't support mixed combinations of
 		 * sta and ap interfaces.
@@ -220,8 +227,8 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 			return -ENOBUFS;
 
 		break;
-	case IEEE80211_IF_TYPE_STA:
-	case IEEE80211_IF_TYPE_IBSS:
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_ADHOC:
 		/*
 		 * We don't support mixed combinations of
 		 * sta and ap interfaces.
@@ -249,7 +256,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 	 */
 	for (i = 0; i < queue->limit; i++) {
 		entry = &queue->entries[i];
-		if (!__test_and_set_bit(ENTRY_BCN_ASSIGNED, &entry->flags))
+		if (!test_and_set_bit(ENTRY_BCN_ASSIGNED, &entry->flags))
 			break;
 	}
 
@@ -261,7 +268,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 	 * increase interface count and start initialization.
 	 */
 
-	if (conf->type == IEEE80211_IF_TYPE_AP)
+	if (conf->type == NL80211_IFTYPE_AP)
 		rt2x00dev->intf_ap_count++;
 	else
 		rt2x00dev->intf_sta_count++;
@@ -270,7 +277,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 	spin_lock_init(&intf->seqlock);
 	intf->beacon = entry;
 
-	if (conf->type == IEEE80211_IF_TYPE_AP)
+	if (conf->type == NL80211_IFTYPE_AP)
 		memcpy(&intf->bssid, conf->mac_addr, ETH_ALEN);
 	memcpy(&intf->mac, conf->mac_addr, ETH_ALEN);
 
@@ -303,12 +310,12 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
 	 * either the device has disappeared or when
 	 * no interface is present.
 	 */
-	if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) ||
-	    (conf->type == IEEE80211_IF_TYPE_AP && !rt2x00dev->intf_ap_count) ||
-	    (conf->type != IEEE80211_IF_TYPE_AP && !rt2x00dev->intf_sta_count))
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
+	    (conf->type == NL80211_IFTYPE_AP && !rt2x00dev->intf_ap_count) ||
+	    (conf->type != NL80211_IFTYPE_AP && !rt2x00dev->intf_sta_count))
 		return;
 
-	if (conf->type == IEEE80211_IF_TYPE_AP)
+	if (conf->type == NL80211_IFTYPE_AP)
 		rt2x00dev->intf_ap_count--;
 	else
 		rt2x00dev->intf_sta_count--;
@@ -317,59 +324,59 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
 	 * Release beacon entry so it is available for
 	 * new interfaces again.
 	 */
-	__clear_bit(ENTRY_BCN_ASSIGNED, &intf->beacon->flags);
+	clear_bit(ENTRY_BCN_ASSIGNED, &intf->beacon->flags);
 
 	/*
 	 * Make sure the bssid and mac address registers
 	 * are cleared to prevent false ACKing of frames.
 	 */
 	rt2x00lib_config_intf(rt2x00dev, intf,
-			      IEEE80211_IF_TYPE_INVALID, NULL, NULL);
+			      NL80211_IFTYPE_UNSPECIFIED, NULL, NULL);
 }
 EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface);
 
 int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
-	int force_reconfig;
+	int radio_on;
+	int status;
 
 	/*
 	 * Mac80211 might be calling this function while we are trying
 	 * to remove the device or perhaps suspending it.
 	 */
-	if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
 		return 0;
 
 	/*
-	 * Check if we need to disable the radio,
-	 * if this is not the case, at least the RX must be disabled.
+	 * Only change device state when the radio is enabled. It does not
+	 * matter what parameters we have configured when the radio is disabled
+	 * because we won't be able to send or receive anyway. Also note that
+	 * some configuration parameters (e.g. channel and antenna values) can
+	 * only be set when the radio is enabled.
 	 */
-	if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) {
-		if (!conf->radio_enabled)
-			rt2x00lib_disable_radio(rt2x00dev);
-		else
-			rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
-	}
+	radio_on = test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags);
+	if (conf->radio_enabled) {
+		/* For programming the values, we have to turn RX off */
+		rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
 
-	/*
-	 * When the DEVICE_DIRTY_CONFIG flag is set, the device has recently
-	 * been started and the configuration must be forced upon the hardware.
-	 * Otherwise registers will not be intialized correctly and could
-	 * result in non-working hardware because essential registers aren't
-	 * initialized.
-	 */
-	force_reconfig =
-	    __test_and_clear_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags);
+		/* Enable the radio */
+		status = rt2x00lib_enable_radio(rt2x00dev);
+		if (unlikely(status))
+			return status;
 
-	rt2x00lib_config(rt2x00dev, conf, force_reconfig);
+		/*
+		 * When we've just turned on the radio, we want to reprogram
+		 * everything to ensure a consistent state
+		 */
+		rt2x00lib_config(rt2x00dev, conf, !radio_on);
 
-	/*
-	 * Reenable RX only if the radio should be on.
-	 */
-	if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+		/* Turn RX back on */
 		rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
-	else if (conf->radio_enabled)
-		return rt2x00lib_enable_radio(rt2x00dev);
+	} else {
+		/* Disable the radio */
+		rt2x00lib_disable_radio(rt2x00dev);
+	}
 
 	return 0;
 }
@@ -388,7 +395,7 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw,
 	 * Mac80211 might be calling this function while we are trying
 	 * to remove the device or perhaps suspending it.
 	 */
-	if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
 		return 0;
 
 	spin_lock(&intf->lock);
@@ -467,6 +474,91 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
 }
 EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter);
 
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+		      const u8 *local_address, const u8 *address,
+		      struct ieee80211_key_conf *key)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	int (*set_key) (struct rt2x00_dev *rt2x00dev,
+			struct rt2x00lib_crypto *crypto,
+			struct ieee80211_key_conf *key);
+	struct rt2x00lib_crypto crypto;
+
+	if (!test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
+		return -EOPNOTSUPP;
+	else if (key->keylen > 32)
+		return -ENOSPC;
+
+	memset(&crypto, 0, sizeof(crypto));
+
+	/*
+	 * When in STA mode, bssidx is always 0 otherwise local_address[5]
+	 * contains the bss number, see BSS_ID_MASK comments for details.
+	 */
+	if (rt2x00dev->intf_sta_count)
+		crypto.bssidx = 0;
+	else
+		crypto.bssidx =
+		    local_address[5] & (rt2x00dev->ops->max_ap_intf - 1);
+
+	crypto.cipher = rt2x00crypto_key_to_cipher(key);
+	if (crypto.cipher == CIPHER_NONE)
+		return -EOPNOTSUPP;
+
+	crypto.cmd = cmd;
+	crypto.address = address;
+
+	if (crypto.cipher == CIPHER_TKIP) {
+		if (key->keylen > NL80211_TKIP_DATA_OFFSET_ENCR_KEY)
+			memcpy(&crypto.key,
+			       &key->key[NL80211_TKIP_DATA_OFFSET_ENCR_KEY],
+			       sizeof(crypto.key));
+
+		if (key->keylen > NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY)
+			memcpy(&crypto.tx_mic,
+			       &key->key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY],
+			       sizeof(crypto.tx_mic));
+
+		if (key->keylen > NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY)
+			memcpy(&crypto.rx_mic,
+			       &key->key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY],
+			       sizeof(crypto.rx_mic));
+	} else
+		memcpy(&crypto.key, &key->key[0], key->keylen);
+
+	/*
+	 * Each BSS has a maximum of 4 shared keys.
+	 * Shared key index values:
+	 *	0) BSS0 key0
+	 *	1) BSS0 key1
+	 *	...
+	 *	4) BSS1 key0
+	 *	...
+	 *	8) BSS2 key0
+	 *	...
+	 * Both pairwise as shared key indeces are determined by
+	 * driver. This is required because the hardware requires
+	 * keys to be assigned in correct order (When key 1 is
+	 * provided but key 0 is not, then the key is not found
+	 * by the hardware during RX).
+	 */
+	if (cmd == SET_KEY)
+		key->hw_key_idx = 0;
+
+	if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+		set_key = rt2x00dev->ops->lib->config_pairwise_key;
+	else
+		set_key = rt2x00dev->ops->lib->config_shared_key;
+
+	if (!set_key)
+		return -EOPNOTSUPP;
+
+	return set_key(rt2x00dev, &crypto, key);
+}
+EXPORT_SYMBOL_GPL(rt2x00mac_set_key);
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
+
 int rt2x00mac_get_stats(struct ieee80211_hw *hw,
 			struct ieee80211_low_level_stats *stats)
 {
@@ -575,10 +667,11 @@ int rt2x00mac_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
 		queue->cw_max = 10; /* cw_min: 2^10 = 1024. */
 
 	queue->aifs = params->aifs;
+	queue->txop = params->txop;
 
 	INFO(rt2x00dev,
-	     "Configured TX queue %d - CWmin: %d, CWmax: %d, Aifs: %d.\n",
-	     queue_idx, queue->cw_min, queue->cw_max, queue->aifs);
+	     "Configured TX queue %d - CWmin: %d, CWmax: %d, Aifs: %d, TXop: %d.\n",
+	     queue_idx, queue->cw_min, queue->cw_max, queue->aifs, queue->txop);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 898cdd7f57d..1676ac48479 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -33,10 +33,11 @@
 struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev,
 					struct queue_entry *entry)
 {
-	unsigned int frame_size;
-	unsigned int reserved_size;
 	struct sk_buff *skb;
 	struct skb_frame_desc *skbdesc;
+	unsigned int frame_size;
+	unsigned int head_size = 0;
+	unsigned int tail_size = 0;
 
 	/*
 	 * The frame size includes descriptor size, because the
@@ -49,16 +50,32 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev,
 	 * this means we need at least 3 bytes for moving the frame
 	 * into the correct offset.
 	 */
-	reserved_size = 4;
+	head_size = 4;
+
+	/*
+	 * For IV/EIV/ICV assembly we must make sure there is
+	 * at least 8 bytes bytes available in headroom for IV/EIV
+	 * and 4 bytes for ICV data as tailroon.
+	 */
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
+		head_size += 8;
+		tail_size += 4;
+	}
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
 
 	/*
 	 * Allocate skbuffer.
 	 */
-	skb = dev_alloc_skb(frame_size + reserved_size);
+	skb = dev_alloc_skb(frame_size + head_size + tail_size);
 	if (!skb)
 		return NULL;
 
-	skb_reserve(skb, reserved_size);
+	/*
+	 * Make sure we not have a frame with the requested bytes
+	 * available in the head and tail.
+	 */
+	skb_reserve(skb, head_size);
 	skb_put(skb, frame_size);
 
 	/*
@@ -83,8 +100,21 @@ void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
 {
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
 
-	skbdesc->skb_dma = dma_map_single(rt2x00dev->dev, skb->data, skb->len,
-					  DMA_TO_DEVICE);
+	/*
+	 * If device has requested headroom, we should make sure that
+	 * is also mapped to the DMA so it can be used for transfering
+	 * additional descriptor information to the hardware.
+	 */
+	skb_push(skb, rt2x00dev->hw->extra_tx_headroom);
+
+	skbdesc->skb_dma =
+	    dma_map_single(rt2x00dev->dev, skb->data, skb->len, DMA_TO_DEVICE);
+
+	/*
+	 * Restore data pointer to original location again.
+	 */
+	skb_pull(skb, rt2x00dev->hw->extra_tx_headroom);
+
 	skbdesc->flags |= SKBDESC_DMA_MAPPED_TX;
 }
 EXPORT_SYMBOL_GPL(rt2x00queue_map_txskb);
@@ -100,7 +130,12 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
 	}
 
 	if (skbdesc->flags & SKBDESC_DMA_MAPPED_TX) {
-		dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, skb->len,
+		/*
+		 * Add headroom to the skb length, it has been removed
+		 * by the driver, but it was actually mapped to DMA.
+		 */
+		dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma,
+				 skb->len + rt2x00dev->hw->extra_tx_headroom,
 				 DMA_TO_DEVICE);
 		skbdesc->flags &= ~SKBDESC_DMA_MAPPED_TX;
 	}
@@ -120,7 +155,6 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
-	struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
 	struct ieee80211_rate *rate =
 	    ieee80211_get_tx_rate(rt2x00dev->hw, tx_info);
@@ -140,7 +174,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	txdesc->cw_max = entry->queue->cw_max;
 	txdesc->aifs = entry->queue->aifs;
 
-	/* Data length should be extended with 4 bytes for CRC */
+	/* Data length + CRC + IV/EIV/ICV/MMIC (when using encryption) */
 	data_length = entry->skb->len + 4;
 
 	/*
@@ -149,6 +183,35 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK))
 		__set_bit(ENTRY_TXD_ACK, &txdesc->flags);
 
+#ifdef CONFIG_RT2X00_LIB_CRYPTO
+	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags) &&
+	    !entry->skb->do_not_encrypt) {
+		struct ieee80211_key_conf *hw_key = tx_info->control.hw_key;
+
+		__set_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags);
+
+		txdesc->cipher = rt2x00crypto_key_to_cipher(hw_key);
+
+		if (hw_key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+			__set_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags);
+
+		txdesc->key_idx = hw_key->hw_key_idx;
+		txdesc->iv_offset = ieee80211_get_hdrlen_from_skb(entry->skb);
+
+		/*
+		 * Extend frame length to include all encryption overhead
+		 * that will be added by the hardware.
+		 */
+		data_length += rt2x00crypto_tx_overhead(tx_info);
+
+		if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV))
+			__set_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags);
+
+		if (!(hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC))
+			__set_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags);
+	}
+#endif /* CONFIG_RT2X00_LIB_CRYPTO */
+
 	/*
 	 * Check if this is a RTS/CTS frame
 	 */
@@ -214,16 +277,22 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	 * sequence counter given by mac80211.
 	 */
 	if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
-		spin_lock_irqsave(&intf->seqlock, irqflags);
+		if (likely(tx_info->control.vif)) {
+			struct rt2x00_intf *intf;
 
-		if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags))
-			intf->seqno += 0x10;
-		hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
-		hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
+			intf = vif_to_intf(tx_info->control.vif);
 
-		spin_unlock_irqrestore(&intf->seqlock, irqflags);
+			spin_lock_irqsave(&intf->seqlock, irqflags);
 
-		__set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
+			if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags))
+				intf->seqno += 0x10;
+			hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+			hdr->seq_ctrl |= cpu_to_le16(intf->seqno);
+
+			spin_unlock_irqrestore(&intf->seqlock, irqflags);
+
+			__set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags);
+		}
 	}
 
 	/*
@@ -305,11 +374,12 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
 	struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX);
 	struct txentry_desc txdesc;
 	struct skb_frame_desc *skbdesc;
+	unsigned int iv_len;
 
 	if (unlikely(rt2x00queue_full(queue)))
 		return -EINVAL;
 
-	if (__test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) {
+	if (test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) {
 		ERROR(queue->rt2x00dev,
 		      "Arrived at non-free entry in the non-full queue %d.\n"
 		      "Please file bug report to %s.\n",
@@ -326,21 +396,42 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
 	rt2x00queue_create_tx_descriptor(entry, &txdesc);
 
 	/*
-	 * skb->cb array is now ours and we are free to use it.
+	 * All information is retreived from the skb->cb array,
+	 * now we should claim ownership of the driver part of that
+	 * array.
 	 */
 	skbdesc = get_skb_frame_desc(entry->skb);
 	memset(skbdesc, 0, sizeof(*skbdesc));
 	skbdesc->entry = entry;
 
+	/*
+	 * When hardware encryption is supported, and this frame
+	 * is to be encrypted, we should strip the IV/EIV data from
+	 * the frame so we can provide it to the driver seperately.
+	 */
+	if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) &&
+	    !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags) &&
+		(IEEE80211_SKB_CB(skb)->control.hw_key != NULL)) {
+		iv_len = IEEE80211_SKB_CB(skb)->control.hw_key->iv_len;
+		rt2x00crypto_tx_remove_iv(skb, iv_len);
+	}
+
+	/*
+	 * It could be possible that the queue was corrupted and this
+	 * call failed. Just drop the frame, we cannot rollback and pass
+	 * the frame to mac80211 because the skb->cb has now been tainted.
+	 */
 	if (unlikely(queue->rt2x00dev->ops->lib->write_tx_data(entry))) {
-		__clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
-		return -EIO;
+		clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
+		dev_kfree_skb_any(entry->skb);
+		entry->skb = NULL;
+		return 0;
 	}
 
 	if (test_bit(DRIVER_REQUIRE_DMA, &queue->rt2x00dev->flags))
 		rt2x00queue_map_txskb(queue->rt2x00dev, skb);
 
-	__set_bit(ENTRY_DATA_PENDING, &entry->flags);
+	set_bit(ENTRY_DATA_PENDING, &entry->flags);
 
 	rt2x00queue_index_inc(queue, Q_INDEX);
 	rt2x00queue_write_tx_descriptor(entry, &txdesc);
@@ -653,6 +744,7 @@ static void rt2x00queue_init(struct rt2x00_dev *rt2x00dev,
 
 	queue->rt2x00dev = rt2x00dev;
 	queue->qid = qid;
+	queue->txop = 0;
 	queue->aifs = 2;
 	queue->cw_min = 5;
 	queue->cw_max = 10;
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index ff78e52ce43..9dbf04f0f04 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -87,10 +87,13 @@ enum data_queue_qid {
  *
  * @SKBDESC_DMA_MAPPED_RX: &skb_dma field has been mapped for RX
  * @SKBDESC_DMA_MAPPED_TX: &skb_dma field has been mapped for TX
+ * @FRAME_DESC_IV_STRIPPED: Frame contained a IV/EIV provided by
+ *	mac80211 but was stripped for processing by the driver.
  */
 enum skb_frame_desc_flags {
-	SKBDESC_DMA_MAPPED_RX = (1 << 0),
-	SKBDESC_DMA_MAPPED_TX = (1 << 1),
+	SKBDESC_DMA_MAPPED_RX = 1 << 0,
+	SKBDESC_DMA_MAPPED_TX = 1 << 1,
+	FRAME_DESC_IV_STRIPPED = 1 << 2,
 };
 
 /**
@@ -104,6 +107,8 @@ enum skb_frame_desc_flags {
  * @desc: Pointer to descriptor part of the frame.
  *	Note that this pointer could point to something outside
  *	of the scope of the skb->data pointer.
+ * @iv: IV data used during encryption/decryption.
+ * @eiv: EIV data used during encryption/decryption.
  * @skb_dma: (PCI-only) the DMA address associated with the sk buffer.
  * @entry: The entry to which this sk buffer belongs.
  */
@@ -113,6 +118,9 @@ struct skb_frame_desc {
 	unsigned int desc_len;
 	void *desc;
 
+	__le32 iv;
+	__le32 eiv;
+
 	dma_addr_t skb_dma;
 
 	struct queue_entry *entry;
@@ -132,13 +140,14 @@ static inline struct skb_frame_desc* get_skb_frame_desc(struct sk_buff *skb)
 /**
  * enum rxdone_entry_desc_flags: Flags for &struct rxdone_entry_desc
  *
- * @RXDONE_SIGNAL_PLCP: Does the signal field contain the plcp value,
- *	or does it contain the bitrate itself.
+ * @RXDONE_SIGNAL_PLCP: Signal field contains the plcp value.
+ * @RXDONE_SIGNAL_BITRATE: Signal field contains the bitrate value.
  * @RXDONE_MY_BSS: Does this frame originate from device's BSS.
  */
 enum rxdone_entry_desc_flags {
 	RXDONE_SIGNAL_PLCP = 1 << 0,
-	RXDONE_MY_BSS = 1 << 1,
+	RXDONE_SIGNAL_BITRATE = 1 << 1,
+	RXDONE_MY_BSS = 1 << 2,
 };
 
 /**
@@ -152,7 +161,11 @@ enum rxdone_entry_desc_flags {
  * @size: Data size of the received frame.
  * @flags: MAC80211 receive flags (See &enum mac80211_rx_flags).
  * @dev_flags: Ralink receive flags (See &enum rxdone_entry_desc_flags).
-
+ * @cipher: Cipher type used during decryption.
+ * @cipher_status: Decryption status.
+ * @iv: IV data used during decryption.
+ * @eiv: EIV data used during decryption.
+ * @icv: ICV data used during decryption.
  */
 struct rxdone_entry_desc {
 	u64 timestamp;
@@ -161,6 +174,12 @@ struct rxdone_entry_desc {
 	int size;
 	int flags;
 	int dev_flags;
+	u8 cipher;
+	u8 cipher_status;
+
+	__le32 iv;
+	__le32 eiv;
+	__le32 icv;
 };
 
 /**
@@ -206,6 +225,10 @@ struct txdone_entry_desc {
  * @ENTRY_TXD_BURST: This frame belongs to the same burst event.
  * @ENTRY_TXD_ACK: An ACK is required for this frame.
  * @ENTRY_TXD_RETRY_MODE: When set, the long retry count is used.
+ * @ENTRY_TXD_ENCRYPT: This frame should be encrypted.
+ * @ENTRY_TXD_ENCRYPT_PAIRWISE: Use pairwise key table (instead of shared).
+ * @ENTRY_TXD_ENCRYPT_IV: Generate IV/EIV in hardware.
+ * @ENTRY_TXD_ENCRYPT_MMIC: Generate MIC in hardware.
  */
 enum txentry_desc_flags {
 	ENTRY_TXD_RTS_FRAME,
@@ -218,6 +241,10 @@ enum txentry_desc_flags {
 	ENTRY_TXD_BURST,
 	ENTRY_TXD_ACK,
 	ENTRY_TXD_RETRY_MODE,
+	ENTRY_TXD_ENCRYPT,
+	ENTRY_TXD_ENCRYPT_PAIRWISE,
+	ENTRY_TXD_ENCRYPT_IV,
+	ENTRY_TXD_ENCRYPT_MMIC,
 };
 
 /**
@@ -236,6 +263,9 @@ enum txentry_desc_flags {
  * @ifs: IFS value.
  * @cw_min: cwmin value.
  * @cw_max: cwmax value.
+ * @cipher: Cipher type used for encryption.
+ * @key_idx: Key index used for encryption.
+ * @iv_offset: Position where IV should be inserted by hardware.
  */
 struct txentry_desc {
 	unsigned long flags;
@@ -252,6 +282,10 @@ struct txentry_desc {
 	short ifs;
 	short cw_min;
 	short cw_max;
+
+	enum cipher cipher;
+	u16 key_idx;
+	u16 iv_offset;
 };
 
 /**
@@ -335,6 +369,7 @@ enum queue_index {
  * @length: Number of frames in queue.
  * @index: Index pointers to entry positions in the queue,
  *	use &enum queue_index to get a specific index field.
+ * @txop: maximum burst time.
  * @aifs: The aifs value for outgoing frames (field ignored in RX queue).
  * @cw_min: The cw min value for outgoing frames (field ignored in RX queue).
  * @cw_max: The cw max value for outgoing frames (field ignored in RX queue).
@@ -354,6 +389,7 @@ struct data_queue {
 	unsigned short length;
 	unsigned short index[Q_INDEX_MAX];
 
+	unsigned short txop;
 	unsigned short aifs;
 	unsigned short cw_min;
 	unsigned short cw_max;
@@ -484,25 +520,51 @@ static inline int rt2x00queue_threshold(struct data_queue *queue)
 }
 
 /**
- * rt2x00_desc_read - Read a word from the hardware descriptor.
+ * _rt2x00_desc_read - Read a word from the hardware descriptor.
+ * @desc: Base descriptor address
+ * @word: Word index from where the descriptor should be read.
+ * @value: Address where the descriptor value should be written into.
+ */
+static inline void _rt2x00_desc_read(__le32 *desc, const u8 word, __le32 *value)
+{
+	*value = desc[word];
+}
+
+/**
+ * rt2x00_desc_read - Read a word from the hardware descriptor, this
+ * function will take care of the byte ordering.
  * @desc: Base descriptor address
  * @word: Word index from where the descriptor should be read.
  * @value: Address where the descriptor value should be written into.
  */
 static inline void rt2x00_desc_read(__le32 *desc, const u8 word, u32 *value)
 {
-	*value = le32_to_cpu(desc[word]);
+	__le32 tmp;
+	_rt2x00_desc_read(desc, word, &tmp);
+	*value = le32_to_cpu(tmp);
+}
+
+/**
+ * rt2x00_desc_write - write a word to the hardware descriptor, this
+ * function will take care of the byte ordering.
+ * @desc: Base descriptor address
+ * @word: Word index from where the descriptor should be written.
+ * @value: Value that should be written into the descriptor.
+ */
+static inline void _rt2x00_desc_write(__le32 *desc, const u8 word, __le32 value)
+{
+	desc[word] = value;
 }
 
 /**
- * rt2x00_desc_write - wrote a word to the hardware descriptor.
+ * rt2x00_desc_write - write a word to the hardware descriptor.
  * @desc: Base descriptor address
  * @word: Word index from where the descriptor should be written.
  * @value: Value that should be written into the descriptor.
  */
 static inline void rt2x00_desc_write(__le32 *desc, const u8 word, u32 value)
 {
-	desc[word] = cpu_to_le32(value);
+	_rt2x00_desc_write(desc, word, cpu_to_le32(value));
 }
 
 #endif /* RT2X00QUEUE_H */
diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
index 2ea7866abd5..c2fba7c9f05 100644
--- a/drivers/net/wireless/rt2x00/rt2x00reg.h
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -27,6 +27,16 @@
 #define RT2X00REG_H
 
 /*
+ * RX crypto status
+ */
+enum rx_crypto {
+	RX_CRYPTO_SUCCESS = 0,
+	RX_CRYPTO_FAIL_ICV = 1,
+	RX_CRYPTO_FAIL_MIC = 2,
+	RX_CRYPTO_FAIL_KEY = 3,
+};
+
+/*
  * Antenna values
  */
 enum antenna {
@@ -104,7 +114,14 @@ enum cipher {
  */
 	CIPHER_CKIP64 = 5,
 	CIPHER_CKIP128 = 6,
-	CIPHER_TKIP_NO_MIC = 7,
+	CIPHER_TKIP_NO_MIC = 7, /* Don't send to device */
+
+/*
+ * Max cipher type.
+ * Note that CIPHER_NONE isn't counted, and CKIP64 and CKIP128
+ * are excluded due to limitations in mac80211.
+ */
+	CIPHER_MAX = 4,
 };
 
 /*
diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
index 04b29716d35..c3f53a92180 100644
--- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c
+++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
@@ -41,20 +41,19 @@ static int rt2x00rfkill_toggle_radio(void *data, enum rfkill_state state)
 	/*
 	 * Only continue if there are enabled interfaces.
 	 */
-	if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags))
+	if (!test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
 		return 0;
 
 	if (state == RFKILL_STATE_UNBLOCKED) {
-		INFO(rt2x00dev, "Hardware button pressed, enabling radio.\n");
-		__clear_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags);
+		INFO(rt2x00dev, "RFKILL event: enabling radio.\n");
+		clear_bit(DEVICE_STATE_DISABLED_RADIO_HW, &rt2x00dev->flags);
 		retval = rt2x00lib_enable_radio(rt2x00dev);
 	} else if (state == RFKILL_STATE_SOFT_BLOCKED) {
-		INFO(rt2x00dev, "Hardware button pressed, disabling radio.\n");
-		__set_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags);
+		INFO(rt2x00dev, "RFKILL event: disabling radio.\n");
+		set_bit(DEVICE_STATE_DISABLED_RADIO_HW, &rt2x00dev->flags);
 		rt2x00lib_disable_radio(rt2x00dev);
 	} else {
-		WARNING(rt2x00dev, "Received unexpected rfkill state %d.\n",
-			state);
+		WARNING(rt2x00dev, "RFKILL event: unknown state %d.\n", state);
 	}
 
 	return retval;
@@ -64,7 +63,12 @@ static int rt2x00rfkill_get_state(void *data, enum rfkill_state *state)
 {
 	struct rt2x00_dev *rt2x00dev = data;
 
-	*state = rt2x00dev->rfkill->state;
+	/*
+	 * rfkill_poll reports 1 when the key has been pressed and the
+	 * radio should be blocked.
+	 */
+	*state = rt2x00dev->ops->lib->rfkill_poll(rt2x00dev) ?
+	    RFKILL_STATE_SOFT_BLOCKED : RFKILL_STATE_UNBLOCKED;
 
 	return 0;
 }
@@ -73,19 +77,18 @@ static void rt2x00rfkill_poll(struct work_struct *work)
 {
 	struct rt2x00_dev *rt2x00dev =
 	    container_of(work, struct rt2x00_dev, rfkill_work.work);
-	int state;
+	enum rfkill_state state;
 
-	if (!test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state))
+	if (!test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state) ||
+	    !test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
 		return;
 
 	/*
-	 * rfkill_poll reports 1 when the key has been pressed and the
-	 * radio should be blocked.
+	 * Poll latest state and report it to rfkill who should sort
+	 * out if the state should be toggled or not.
 	 */
-	state = !rt2x00dev->ops->lib->rfkill_poll(rt2x00dev) ?
-	    RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED;
-
-	rfkill_force_state(rt2x00dev->rfkill, state);
+	if (!rt2x00rfkill_get_state(rt2x00dev, &state))
+		rfkill_force_state(rt2x00dev->rfkill, state);
 
 	queue_delayed_work(rt2x00dev->hw->workqueue,
 			   &rt2x00dev->rfkill_work, RFKILL_POLL_INTERVAL);
@@ -93,8 +96,8 @@ static void rt2x00rfkill_poll(struct work_struct *work)
 
 void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
 {
-	if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) ||
-	    !test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state))
+	if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state) ||
+	    test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state))
 		return;
 
 	if (rfkill_register(rt2x00dev->rfkill)) {
@@ -114,7 +117,7 @@ void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
 
 void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev)
 {
-	if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) ||
+	if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state) ||
 	    !test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state))
 		return;
 
@@ -127,21 +130,30 @@ void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev)
 
 void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev)
 {
-	if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags))
+	struct device *dev = wiphy_dev(rt2x00dev->hw->wiphy);
+
+	if (test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state))
 		return;
 
-	rt2x00dev->rfkill =
-	    rfkill_allocate(wiphy_dev(rt2x00dev->hw->wiphy), RFKILL_TYPE_WLAN);
+	rt2x00dev->rfkill = rfkill_allocate(dev, RFKILL_TYPE_WLAN);
 	if (!rt2x00dev->rfkill) {
 		ERROR(rt2x00dev, "Failed to allocate rfkill handler.\n");
 		return;
 	}
 
+	__set_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state);
+
 	rt2x00dev->rfkill->name = rt2x00dev->ops->name;
 	rt2x00dev->rfkill->data = rt2x00dev;
-	rt2x00dev->rfkill->state = -1;
 	rt2x00dev->rfkill->toggle_radio = rt2x00rfkill_toggle_radio;
-	rt2x00dev->rfkill->get_state = rt2x00rfkill_get_state;
+	if (test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) {
+		rt2x00dev->rfkill->get_state = rt2x00rfkill_get_state;
+		rt2x00dev->rfkill->state =
+			rt2x00dev->ops->lib->rfkill_poll(rt2x00dev) ?
+			    RFKILL_STATE_SOFT_BLOCKED : RFKILL_STATE_UNBLOCKED;
+	} else {
+		rt2x00dev->rfkill->state = RFKILL_STATE_UNBLOCKED;
+	}
 
 	INIT_DELAYED_WORK(&rt2x00dev->rfkill_work, rt2x00rfkill_poll);
 
@@ -150,8 +162,7 @@ void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev)
 
 void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev)
 {
-	if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) ||
-	    !test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state))
+	if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->flags))
 		return;
 
 	cancel_delayed_work_sync(&rt2x00dev->rfkill_work);
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 2050227ea53..b73a7e0aeed 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -163,16 +163,11 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb)
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct txdone_entry_desc txdesc;
 
-	if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) ||
 	    !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
 		return;
 
 	/*
-	 * Remove the descriptor data from the buffer.
-	 */
-	skb_pull(entry->skb, entry->queue->desc_size);
-
-	/*
 	 * Obtain the status about this packet.
 	 * Note that when the status is 0 it does not mean the
 	 * frame was send out correctly. It only means the frame
@@ -224,6 +219,12 @@ int rt2x00usb_write_tx_data(struct queue_entry *entry)
 			  entry->skb->data, length,
 			  rt2x00usb_interrupt_txdone, entry);
 
+	/*
+	 * Make sure the skb->data pointer points to the frame, not the
+	 * descriptor.
+	 */
+	skb_pull(entry->skb, entry->queue->desc_size);
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(rt2x00usb_write_tx_data);
@@ -232,7 +233,7 @@ static inline void rt2x00usb_kick_tx_entry(struct queue_entry *entry)
 {
 	struct queue_entry_priv_usb *entry_priv = entry->priv_data;
 
-	if (__test_and_clear_bit(ENTRY_DATA_PENDING, &entry->flags))
+	if (test_and_clear_bit(ENTRY_DATA_PENDING, &entry->flags))
 		usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
 }
 
@@ -283,7 +284,7 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb)
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 	u8 rxd[32];
 
-	if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) ||
 	    !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
 		return;
 
@@ -293,7 +294,7 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb)
 	 * a problem.
 	 */
 	if (urb->actual_length < entry->queue->desc_size || urb->status) {
-		__set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
+		set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
 		usb_submit_urb(urb, GFP_ATOMIC);
 		return;
 	}
@@ -361,7 +362,7 @@ void rt2x00usb_init_rxentry(struct rt2x00_dev *rt2x00dev,
 			  entry->skb->data, entry->skb->len,
 			  rt2x00usb_interrupt_rxdone, entry);
 
-	__set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
+	set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
 	usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
 }
 EXPORT_SYMBOL_GPL(rt2x00usb_init_rxentry);
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 087e90b328c..a461620b489 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -38,6 +38,13 @@
 #include "rt61pci.h"
 
 /*
+ * Allow hardware encryption to be disabled.
+ */
+static int modparam_nohwcrypt = 0;
+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
+/*
  * Register access.
  * BBP and RF register require indirect register access,
  * and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this.
@@ -156,7 +163,7 @@ rf_write:
 	rt2x00_rf_write(rt2x00dev, word, value);
 }
 
-#ifdef CONFIG_RT61PCI_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
 /*
  * This function is only called from rt61pci_led_brightness()
  * make gcc happy by placing this function inside the
@@ -188,7 +195,7 @@ static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&reg, HOST_CMD_CSR_INTERRUPT_MCU, 1);
 	rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg);
 }
-#endif /* CONFIG_RT61PCI_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
 
 static void rt61pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
 {
@@ -264,7 +271,7 @@ static const struct rt2x00debug rt61pci_rt2x00debug = {
 };
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 
-#ifdef CONFIG_RT61PCI_RFKILL
+#ifdef CONFIG_RT2X00_LIB_RFKILL
 static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
@@ -274,9 +281,9 @@ static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 }
 #else
 #define rt61pci_rfkill_poll	NULL
-#endif /* CONFIG_RT61PCI_RFKILL */
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
 
-#ifdef CONFIG_RT61PCI_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
 static void rt61pci_brightness_set(struct led_classdev *led_cdev,
 				   enum led_brightness brightness)
 {
@@ -341,11 +348,209 @@ static void rt61pci_init_led(struct rt2x00_dev *rt2x00dev,
 	led->led_dev.blink_set = rt61pci_blink_set;
 	led->flags = LED_INITIALIZED;
 }
-#endif /* CONFIG_RT61PCI_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
 
 /*
  * Configuration handlers.
  */
+static int rt61pci_config_shared_key(struct rt2x00_dev *rt2x00dev,
+				     struct rt2x00lib_crypto *crypto,
+				     struct ieee80211_key_conf *key)
+{
+	struct hw_key_entry key_entry;
+	struct rt2x00_field32 field;
+	u32 mask;
+	u32 reg;
+
+	if (crypto->cmd == SET_KEY) {
+		/*
+		 * rt2x00lib can't determine the correct free
+		 * key_idx for shared keys. We have 1 register
+		 * with key valid bits. The goal is simple, read
+		 * the register, if that is full we have no slots
+		 * left.
+		 * Note that each BSS is allowed to have up to 4
+		 * shared keys, so put a mask over the allowed
+		 * entries.
+		 */
+		mask = (0xf << crypto->bssidx);
+
+		rt2x00pci_register_read(rt2x00dev, SEC_CSR0, &reg);
+		reg &= mask;
+
+		if (reg && reg == mask)
+			return -ENOSPC;
+
+		key->hw_key_idx += reg ? ffz(reg) : 0;
+
+		/*
+		 * Upload key to hardware
+		 */
+		memcpy(key_entry.key, crypto->key,
+		       sizeof(key_entry.key));
+		memcpy(key_entry.tx_mic, crypto->tx_mic,
+		       sizeof(key_entry.tx_mic));
+		memcpy(key_entry.rx_mic, crypto->rx_mic,
+		       sizeof(key_entry.rx_mic));
+
+		reg = SHARED_KEY_ENTRY(key->hw_key_idx);
+		rt2x00pci_register_multiwrite(rt2x00dev, reg,
+					      &key_entry, sizeof(key_entry));
+
+		/*
+		 * The cipher types are stored over 2 registers.
+		 * bssidx 0 and 1 keys are stored in SEC_CSR1 and
+		 * bssidx 1 and 2 keys are stored in SEC_CSR5.
+		 * Using the correct defines correctly will cause overhead,
+		 * so just calculate the correct offset.
+		 */
+		if (key->hw_key_idx < 8) {
+			field.bit_offset = (3 * key->hw_key_idx);
+			field.bit_mask = 0x7 << field.bit_offset;
+
+			rt2x00pci_register_read(rt2x00dev, SEC_CSR1, &reg);
+			rt2x00_set_field32(&reg, field, crypto->cipher);
+			rt2x00pci_register_write(rt2x00dev, SEC_CSR1, reg);
+		} else {
+			field.bit_offset = (3 * (key->hw_key_idx - 8));
+			field.bit_mask = 0x7 << field.bit_offset;
+
+			rt2x00pci_register_read(rt2x00dev, SEC_CSR5, &reg);
+			rt2x00_set_field32(&reg, field, crypto->cipher);
+			rt2x00pci_register_write(rt2x00dev, SEC_CSR5, reg);
+		}
+
+		/*
+		 * The driver does not support the IV/EIV generation
+		 * in hardware. However it doesn't support the IV/EIV
+		 * inside the ieee80211 frame either, but requires it
+		 * to be provided seperately for the descriptor.
+		 * rt2x00lib will cut the IV/EIV data out of all frames
+		 * given to us by mac80211, but we must tell mac80211
+		 * to generate the IV/EIV data.
+		 */
+		key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+	}
+
+	/*
+	 * SEC_CSR0 contains only single-bit fields to indicate
+	 * a particular key is valid. Because using the FIELD32()
+	 * defines directly will cause a lot of overhead we use
+	 * a calculation to determine the correct bit directly.
+	 */
+	mask = 1 << key->hw_key_idx;
+
+	rt2x00pci_register_read(rt2x00dev, SEC_CSR0, &reg);
+	if (crypto->cmd == SET_KEY)
+		reg |= mask;
+	else if (crypto->cmd == DISABLE_KEY)
+		reg &= ~mask;
+	rt2x00pci_register_write(rt2x00dev, SEC_CSR0, reg);
+
+	return 0;
+}
+
+static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
+				       struct rt2x00lib_crypto *crypto,
+				       struct ieee80211_key_conf *key)
+{
+	struct hw_pairwise_ta_entry addr_entry;
+	struct hw_key_entry key_entry;
+	u32 mask;
+	u32 reg;
+
+	if (crypto->cmd == SET_KEY) {
+		/*
+		 * rt2x00lib can't determine the correct free
+		 * key_idx for pairwise keys. We have 2 registers
+		 * with key valid bits. The goal is simple, read
+		 * the first register, if that is full move to
+		 * the next register.
+		 * When both registers are full, we drop the key,
+		 * otherwise we use the first invalid entry.
+		 */
+		rt2x00pci_register_read(rt2x00dev, SEC_CSR2, &reg);
+		if (reg && reg == ~0) {
+			key->hw_key_idx = 32;
+			rt2x00pci_register_read(rt2x00dev, SEC_CSR3, &reg);
+			if (reg && reg == ~0)
+				return -ENOSPC;
+		}
+
+		key->hw_key_idx += reg ? ffz(reg) : 0;
+
+		/*
+		 * Upload key to hardware
+		 */
+		memcpy(key_entry.key, crypto->key,
+		       sizeof(key_entry.key));
+		memcpy(key_entry.tx_mic, crypto->tx_mic,
+		       sizeof(key_entry.tx_mic));
+		memcpy(key_entry.rx_mic, crypto->rx_mic,
+		       sizeof(key_entry.rx_mic));
+
+		memset(&addr_entry, 0, sizeof(addr_entry));
+		memcpy(&addr_entry, crypto->address, ETH_ALEN);
+		addr_entry.cipher = crypto->cipher;
+
+		reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
+		rt2x00pci_register_multiwrite(rt2x00dev, reg,
+					      &key_entry, sizeof(key_entry));
+
+		reg = PAIRWISE_TA_ENTRY(key->hw_key_idx);
+		rt2x00pci_register_multiwrite(rt2x00dev, reg,
+					      &addr_entry, sizeof(addr_entry));
+
+		/*
+		 * Enable pairwise lookup table for given BSS idx,
+		 * without this received frames will not be decrypted
+		 * by the hardware.
+		 */
+		rt2x00pci_register_read(rt2x00dev, SEC_CSR4, &reg);
+		reg |= (1 << crypto->bssidx);
+		rt2x00pci_register_write(rt2x00dev, SEC_CSR4, reg);
+
+		/*
+		 * The driver does not support the IV/EIV generation
+		 * in hardware. However it doesn't support the IV/EIV
+		 * inside the ieee80211 frame either, but requires it
+		 * to be provided seperately for the descriptor.
+		 * rt2x00lib will cut the IV/EIV data out of all frames
+		 * given to us by mac80211, but we must tell mac80211
+		 * to generate the IV/EIV data.
+		 */
+		key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+	}
+
+	/*
+	 * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate
+	 * a particular key is valid. Because using the FIELD32()
+	 * defines directly will cause a lot of overhead we use
+	 * a calculation to determine the correct bit directly.
+	 */
+	if (key->hw_key_idx < 32) {
+		mask = 1 << key->hw_key_idx;
+
+		rt2x00pci_register_read(rt2x00dev, SEC_CSR2, &reg);
+		if (crypto->cmd == SET_KEY)
+			reg |= mask;
+		else if (crypto->cmd == DISABLE_KEY)
+			reg &= ~mask;
+		rt2x00pci_register_write(rt2x00dev, SEC_CSR2, reg);
+	} else {
+		mask = 1 << (key->hw_key_idx - 32);
+
+		rt2x00pci_register_read(rt2x00dev, SEC_CSR3, &reg);
+		if (crypto->cmd == SET_KEY)
+			reg |= mask;
+		else if (crypto->cmd == DISABLE_KEY)
+			reg &= ~mask;
+		rt2x00pci_register_write(rt2x00dev, SEC_CSR3, reg);
+	}
+
+	return 0;
+}
+
 static void rt61pci_config_filter(struct rt2x00_dev *rt2x00dev,
 				  const unsigned int filter_flags)
 {
@@ -440,6 +645,30 @@ static void rt61pci_config_erp(struct rt2x00_dev *rt2x00dev,
 	rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
 }
 
+
+static void rt61pci_config_lna_gain(struct rt2x00_dev *rt2x00dev,
+				    struct rt2x00lib_conf *libconf)
+{
+	u16 eeprom;
+	short lna_gain = 0;
+
+	if (libconf->band == IEEE80211_BAND_2GHZ) {
+		if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
+			lna_gain += 14;
+
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
+		lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
+	} else {
+		if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
+			lna_gain += 14;
+
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
+		lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
+	}
+
+	rt2x00dev->lna_gain = lna_gain;
+}
+
 static void rt61pci_config_phymode(struct rt2x00_dev *rt2x00dev,
 				   const int basic_rate_mask)
 {
@@ -758,6 +987,9 @@ static void rt61pci_config(struct rt2x00_dev *rt2x00dev,
 			   struct rt2x00lib_conf *libconf,
 			   const unsigned int flags)
 {
+	/* Always recalculate LNA gain before changing configuration */
+	rt61pci_config_lna_gain(rt2x00dev, libconf);
+
 	if (flags & CONFIG_UPDATE_PHYMODE)
 		rt61pci_config_phymode(rt2x00dev, libconf->basic_rates);
 	if (flags & CONFIG_UPDATE_CHANNEL)
@@ -1246,16 +1478,6 @@ static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev)
 
 	rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff);
 
-	rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR0, &reg);
-	rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC0_TX_OP, 0);
-	rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC1_TX_OP, 0);
-	rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
-
-	rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR1, &reg);
-	rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC2_TX_OP, 192);
-	rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC3_TX_OP, 48);
-	rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
-
 	/*
 	 * Clear all beacons
 	 * For the Beacon base registers we only need to clear
@@ -1533,8 +1755,8 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev,
  * TX descriptor initialization
  */
 static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
-				    struct sk_buff *skb,
-				    struct txentry_desc *txdesc)
+				  struct sk_buff *skb,
+				  struct txentry_desc *txdesc)
 {
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
 	__le32 *txd = skbdesc->desc;
@@ -1548,7 +1770,7 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs);
 	rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
 	rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
-	rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
+	rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
 	rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
 			   test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
 	rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1);
@@ -1561,6 +1783,11 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
 	rt2x00_desc_write(txd, 2, word);
 
+	if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) {
+		_rt2x00_desc_write(txd, 3, skbdesc->iv);
+		_rt2x00_desc_write(txd, 4, skbdesc->eiv);
+	}
+
 	rt2x00_desc_read(txd, 5, &word);
 	rt2x00_set_field32(&word, TXD_W5_PID_TYPE, skbdesc->entry->queue->qid);
 	rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE,
@@ -1595,11 +1822,15 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
 	rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
 			   test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
-	rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0);
+	rt2x00_set_field32(&word, TXD_W0_TKIP_MIC,
+			   test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags));
+	rt2x00_set_field32(&word, TXD_W0_KEY_TABLE,
+			   test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags));
+	rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx);
 	rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
 	rt2x00_set_field32(&word, TXD_W0_BURST,
 			   test_bit(ENTRY_TXD_BURST, &txdesc->flags));
-	rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
+	rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher);
 	rt2x00_desc_write(txd, 0, word);
 }
 
@@ -1676,40 +1907,27 @@ static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
  */
 static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
 {
-	u16 eeprom;
-	u8 offset;
+	u8 offset = rt2x00dev->lna_gain;
 	u8 lna;
 
 	lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA);
 	switch (lna) {
 	case 3:
-		offset = 90;
+		offset += 90;
 		break;
 	case 2:
-		offset = 74;
+		offset += 74;
 		break;
 	case 1:
-		offset = 64;
+		offset += 64;
 		break;
 	default:
 		return 0;
 	}
 
 	if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
-		if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
-			offset += 14;
-
 		if (lna == 3 || lna == 2)
 			offset += 10;
-
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
-		offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
-	} else {
-		if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
-			offset += 14;
-
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
-		offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
 	}
 
 	return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
@@ -1718,6 +1936,7 @@ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
 static void rt61pci_fill_rxdone(struct queue_entry *entry,
 			        struct rxdone_entry_desc *rxdesc)
 {
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct queue_entry_priv_pci *entry_priv = entry->priv_data;
 	u32 word0;
 	u32 word1;
@@ -1728,6 +1947,38 @@ static void rt61pci_fill_rxdone(struct queue_entry *entry,
 	if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
 		rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
 
+	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
+		rxdesc->cipher =
+		    rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG);
+		rxdesc->cipher_status =
+		    rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR);
+	}
+
+	if (rxdesc->cipher != CIPHER_NONE) {
+		_rt2x00_desc_read(entry_priv->desc, 2, &rxdesc->iv);
+		_rt2x00_desc_read(entry_priv->desc, 3, &rxdesc->eiv);
+		_rt2x00_desc_read(entry_priv->desc, 4, &rxdesc->icv);
+
+		/*
+		 * Hardware has stripped IV/EIV data from 802.11 frame during
+		 * decryption. It has provided the data seperately but rt2x00lib
+		 * should decide if it should be reinserted.
+		 */
+		rxdesc->flags |= RX_FLAG_IV_STRIPPED;
+
+		/*
+		 * FIXME: Legacy driver indicates that the frame does
+		 * contain the Michael Mic. Unfortunately, in rt2x00
+		 * the MIC seems to be missing completely...
+		 */
+		rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
+
+		if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
+			rxdesc->flags |= RX_FLAG_DECRYPTED;
+		else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
+			rxdesc->flags |= RX_FLAG_MMIC_ERROR;
+	}
+
 	/*
 	 * Obtain the status about this packet.
 	 * When frame was received with an OFDM bitrate,
@@ -1735,11 +1986,13 @@ static void rt61pci_fill_rxdone(struct queue_entry *entry,
 	 * a CCK bitrate the signal is the rate in 100kbit/s.
 	 */
 	rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
-	rxdesc->rssi = rt61pci_agc_to_rssi(entry->queue->rt2x00dev, word1);
+	rxdesc->rssi = rt61pci_agc_to_rssi(rt2x00dev, word1);
 	rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
 
 	if (rt2x00_get_field32(word0, RXD_W0_OFDM))
 		rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
+	else
+		rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
 	if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
 		rxdesc->dev_flags |= RXDONE_MY_BSS;
 }
@@ -1860,7 +2113,7 @@ static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance)
 	if (!reg && !reg_mcu)
 		return IRQ_NONE;
 
-	if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 		return IRQ_HANDLED;
 
 	/*
@@ -2060,10 +2313,10 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Detect if this device has an hardware controlled radio.
 	 */
-#ifdef CONFIG_RT61PCI_RFKILL
+#ifdef CONFIG_RT2X00_LIB_RFKILL
 	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
 		__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-#endif /* CONFIG_RT61PCI_RFKILL */
+#endif /* CONFIG_RT2X00_LIB_RFKILL */
 
 	/*
 	 * Read frequency offset and RF programming sequence.
@@ -2121,7 +2374,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 * If the eeprom value is invalid,
 	 * switch to default led mode.
 	 */
-#ifdef CONFIG_RT61PCI_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom);
 	value = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE);
 
@@ -2155,7 +2408,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A,
 			   rt2x00_get_field16(eeprom,
 					      EEPROM_LED_POLARITY_RDY_A));
-#endif /* CONFIG_RT61PCI_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
 
 	return 0;
 }
@@ -2274,10 +2527,11 @@ static const struct rf_channel rf_vals_seq[] = {
 	{ 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000c0a23 },
 };
 
-static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 {
 	struct hw_mode_spec *spec = &rt2x00dev->spec;
-	u8 *txpower;
+	struct channel_info *info;
+	char *tx_power;
 	unsigned int i;
 
 	/*
@@ -2294,20 +2548,10 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 						   EEPROM_MAC_ADDR_0));
 
 	/*
-	 * Convert tx_power array in eeprom.
-	 */
-	txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
-	for (i = 0; i < 14; i++)
-		txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
-	/*
 	 * Initialize hw_mode information.
 	 */
 	spec->supported_bands = SUPPORT_BAND_2GHZ;
 	spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
-	spec->tx_power_a = NULL;
-	spec->tx_power_bg = txpower;
-	spec->tx_power_default = DEFAULT_TXPOWER;
 
 	if (!test_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags)) {
 		spec->num_channels = 14;
@@ -2321,13 +2565,28 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	    rt2x00_rf(&rt2x00dev->chip, RF5325)) {
 		spec->supported_bands |= SUPPORT_BAND_5GHZ;
 		spec->num_channels = ARRAY_SIZE(rf_vals_seq);
+	}
 
-		txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
-		for (i = 0; i < 14; i++)
-			txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
+	/*
+	 * Create channel information array
+	 */
+	info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
 
-		spec->tx_power_a = txpower;
+	spec->channels_info = info;
+
+	tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
+	for (i = 0; i < 14; i++)
+		info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+
+	if (spec->num_channels > 14) {
+		tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
+		for (i = 14; i < spec->num_channels; i++)
+			info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
 	}
+
+	return 0;
 }
 
 static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
@@ -2348,13 +2607,17 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Initialize hw specifications.
 	 */
-	rt61pci_probe_hw_mode(rt2x00dev);
+	retval = rt61pci_probe_hw_mode(rt2x00dev);
+	if (retval)
+		return retval;
 
 	/*
 	 * This device requires firmware and DMA mapped skbs.
 	 */
 	__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
 	__set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
+	if (!modparam_nohwcrypt)
+		__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
 
 	/*
 	 * Set the rssi offset.
@@ -2381,6 +2644,63 @@ static int rt61pci_set_retry_limit(struct ieee80211_hw *hw,
 	return 0;
 }
 
+static int rt61pci_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
+			   const struct ieee80211_tx_queue_params *params)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	struct data_queue *queue;
+	struct rt2x00_field32 field;
+	int retval;
+	u32 reg;
+
+	/*
+	 * First pass the configuration through rt2x00lib, that will
+	 * update the queue settings and validate the input. After that
+	 * we are free to update the registers based on the value
+	 * in the queue parameter.
+	 */
+	retval = rt2x00mac_conf_tx(hw, queue_idx, params);
+	if (retval)
+		return retval;
+
+	queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
+
+	/* Update WMM TXOP register */
+	if (queue_idx < 2) {
+		field.bit_offset = queue_idx * 16;
+		field.bit_mask = 0xffff << field.bit_offset;
+
+		rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR0, &reg);
+		rt2x00_set_field32(&reg, field, queue->txop);
+		rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
+	} else if (queue_idx < 4) {
+		field.bit_offset = (queue_idx - 2) * 16;
+		field.bit_mask = 0xffff << field.bit_offset;
+
+		rt2x00pci_register_read(rt2x00dev, AC_TXOP_CSR1, &reg);
+		rt2x00_set_field32(&reg, field, queue->txop);
+		rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
+	}
+
+	/* Update WMM registers */
+	field.bit_offset = queue_idx * 4;
+	field.bit_mask = 0xf << field.bit_offset;
+
+	rt2x00pci_register_read(rt2x00dev, AIFSN_CSR, &reg);
+	rt2x00_set_field32(&reg, field, queue->aifs);
+	rt2x00pci_register_write(rt2x00dev, AIFSN_CSR, reg);
+
+	rt2x00pci_register_read(rt2x00dev, CWMIN_CSR, &reg);
+	rt2x00_set_field32(&reg, field, queue->cw_min);
+	rt2x00pci_register_write(rt2x00dev, CWMIN_CSR, reg);
+
+	rt2x00pci_register_read(rt2x00dev, CWMAX_CSR, &reg);
+	rt2x00_set_field32(&reg, field, queue->cw_max);
+	rt2x00pci_register_write(rt2x00dev, CWMAX_CSR, reg);
+
+	return 0;
+}
+
 static u64 rt61pci_get_tsf(struct ieee80211_hw *hw)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
@@ -2404,10 +2724,11 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = {
 	.config			= rt2x00mac_config,
 	.config_interface	= rt2x00mac_config_interface,
 	.configure_filter	= rt2x00mac_configure_filter,
+	.set_key		= rt2x00mac_set_key,
 	.get_stats		= rt2x00mac_get_stats,
 	.set_retry_limit	= rt61pci_set_retry_limit,
 	.bss_info_changed	= rt2x00mac_bss_info_changed,
-	.conf_tx		= rt2x00mac_conf_tx,
+	.conf_tx		= rt61pci_conf_tx,
 	.get_tx_stats		= rt2x00mac_get_tx_stats,
 	.get_tsf		= rt61pci_get_tsf,
 };
@@ -2432,6 +2753,8 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
 	.write_beacon		= rt61pci_write_beacon,
 	.kick_tx_queue		= rt61pci_kick_tx_queue,
 	.fill_rxdone		= rt61pci_fill_rxdone,
+	.config_shared_key	= rt61pci_config_shared_key,
+	.config_pairwise_key	= rt61pci_config_pairwise_key,
 	.config_filter		= rt61pci_config_filter,
 	.config_intf		= rt61pci_config_intf,
 	.config_erp		= rt61pci_config_erp,
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index 1004d5b899e..8ec1451308c 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -134,6 +134,16 @@
 #define PAIRWISE_KEY_TABLE_BASE		0x1200
 #define PAIRWISE_TA_TABLE_BASE		0x1a00
 
+#define SHARED_KEY_ENTRY(__idx) \
+	( SHARED_KEY_TABLE_BASE + \
+		((__idx) * sizeof(struct hw_key_entry)) )
+#define PAIRWISE_KEY_ENTRY(__idx) \
+	( PAIRWISE_KEY_TABLE_BASE + \
+		((__idx) * sizeof(struct hw_key_entry)) )
+#define PAIRWISE_TA_ENTRY(__idx) \
+	( PAIRWISE_TA_TABLE_BASE + \
+		((__idx) * sizeof(struct hw_pairwise_ta_entry)) )
+
 struct hw_key_entry {
 	u8 key[16];
 	u8 tx_mic[8];
@@ -142,7 +152,8 @@ struct hw_key_entry {
 
 struct hw_pairwise_ta_entry {
 	u8 address[6];
-	u8 reserved[2];
+	u8 cipher;
+	u8 reserved;
 } __attribute__ ((packed));
 
 /*
@@ -662,6 +673,10 @@ struct hw_pairwise_ta_entry {
  * SEC_CSR4: Pairwise key table lookup control.
  */
 #define SEC_CSR4			0x30b0
+#define SEC_CSR4_ENABLE_BSS0		FIELD32(0x00000001)
+#define SEC_CSR4_ENABLE_BSS1		FIELD32(0x00000002)
+#define SEC_CSR4_ENABLE_BSS2		FIELD32(0x00000004)
+#define SEC_CSR4_ENABLE_BSS3		FIELD32(0x00000008)
 
 /*
  * SEC_CSR5: shared key table security mode register.
@@ -1428,8 +1443,10 @@ struct hw_pairwise_ta_entry {
 
 /*
  * Word4
+ * ICV: Received ICV of originally encrypted.
+ * NOTE: This is a guess, the official definition is "reserved"
  */
-#define RXD_W4_RESERVED			FIELD32(0xffffffff)
+#define RXD_W4_ICV			FIELD32(0xffffffff)
 
 /*
  * the above 20-byte is called RXINFO and will be DMAed to MAC RX block
@@ -1465,17 +1482,10 @@ struct hw_pairwise_ta_entry {
 #define MAX_TXPOWER	31
 #define DEFAULT_TXPOWER	24
 
-#define TXPOWER_FROM_DEV(__txpower)		\
-({						\
-	((__txpower) > MAX_TXPOWER) ?		\
-		DEFAULT_TXPOWER : (__txpower);	\
-})
-
-#define TXPOWER_TO_DEV(__txpower)			\
-({							\
-	((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER :	\
-	(((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER :	\
-	(__txpower));					\
-})
+#define TXPOWER_FROM_DEV(__txpower) \
+	(((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_TO_DEV(__txpower) \
+	clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
 
 #endif /* RT61PCI_H */
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 9761eaaa08b..934f8e03c5a 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -37,6 +37,13 @@
 #include "rt73usb.h"
 
 /*
+ * Allow hardware encryption to be disabled.
+ */
+static int modparam_nohwcrypt = 0;
+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
+/*
  * Register access.
  * All access to the CSR registers will go through the methods
  * rt73usb_register_read and rt73usb_register_write.
@@ -285,7 +292,7 @@ static const struct rt2x00debug rt73usb_rt2x00debug = {
 };
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 
-#ifdef CONFIG_RT73USB_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
 static void rt73usb_brightness_set(struct led_classdev *led_cdev,
 				   enum led_brightness brightness)
 {
@@ -352,11 +359,224 @@ static void rt73usb_init_led(struct rt2x00_dev *rt2x00dev,
 	led->led_dev.blink_set = rt73usb_blink_set;
 	led->flags = LED_INITIALIZED;
 }
-#endif /* CONFIG_RT73USB_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
 
 /*
  * Configuration handlers.
  */
+static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
+				     struct rt2x00lib_crypto *crypto,
+				     struct ieee80211_key_conf *key)
+{
+	struct hw_key_entry key_entry;
+	struct rt2x00_field32 field;
+	int timeout;
+	u32 mask;
+	u32 reg;
+
+	if (crypto->cmd == SET_KEY) {
+		/*
+		 * rt2x00lib can't determine the correct free
+		 * key_idx for shared keys. We have 1 register
+		 * with key valid bits. The goal is simple, read
+		 * the register, if that is full we have no slots
+		 * left.
+		 * Note that each BSS is allowed to have up to 4
+		 * shared keys, so put a mask over the allowed
+		 * entries.
+		 */
+		mask = (0xf << crypto->bssidx);
+
+		rt73usb_register_read(rt2x00dev, SEC_CSR0, &reg);
+		reg &= mask;
+
+		if (reg && reg == mask)
+			return -ENOSPC;
+
+		key->hw_key_idx += reg ? ffz(reg) : 0;
+
+		/*
+		 * Upload key to hardware
+		 */
+		memcpy(key_entry.key, crypto->key,
+		       sizeof(key_entry.key));
+		memcpy(key_entry.tx_mic, crypto->tx_mic,
+		       sizeof(key_entry.tx_mic));
+		memcpy(key_entry.rx_mic, crypto->rx_mic,
+		       sizeof(key_entry.rx_mic));
+
+		reg = SHARED_KEY_ENTRY(key->hw_key_idx);
+		timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
+		rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+						    USB_VENDOR_REQUEST_OUT, reg,
+						    &key_entry,
+						    sizeof(key_entry),
+						    timeout);
+
+		/*
+		 * The cipher types are stored over 2 registers.
+		 * bssidx 0 and 1 keys are stored in SEC_CSR1 and
+		 * bssidx 1 and 2 keys are stored in SEC_CSR5.
+		 * Using the correct defines correctly will cause overhead,
+		 * so just calculate the correct offset.
+		 */
+		if (key->hw_key_idx < 8) {
+			field.bit_offset = (3 * key->hw_key_idx);
+			field.bit_mask = 0x7 << field.bit_offset;
+
+			rt73usb_register_read(rt2x00dev, SEC_CSR1, &reg);
+			rt2x00_set_field32(&reg, field, crypto->cipher);
+			rt73usb_register_write(rt2x00dev, SEC_CSR1, reg);
+		} else {
+			field.bit_offset = (3 * (key->hw_key_idx - 8));
+			field.bit_mask = 0x7 << field.bit_offset;
+
+			rt73usb_register_read(rt2x00dev, SEC_CSR5, &reg);
+			rt2x00_set_field32(&reg, field, crypto->cipher);
+			rt73usb_register_write(rt2x00dev, SEC_CSR5, reg);
+		}
+
+		/*
+		 * The driver does not support the IV/EIV generation
+		 * in hardware. However it doesn't support the IV/EIV
+		 * inside the ieee80211 frame either, but requires it
+		 * to be provided seperately for the descriptor.
+		 * rt2x00lib will cut the IV/EIV data out of all frames
+		 * given to us by mac80211, but we must tell mac80211
+		 * to generate the IV/EIV data.
+		 */
+		key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+	}
+
+	/*
+	 * SEC_CSR0 contains only single-bit fields to indicate
+	 * a particular key is valid. Because using the FIELD32()
+	 * defines directly will cause a lot of overhead we use
+	 * a calculation to determine the correct bit directly.
+	 */
+	mask = 1 << key->hw_key_idx;
+
+	rt73usb_register_read(rt2x00dev, SEC_CSR0, &reg);
+	if (crypto->cmd == SET_KEY)
+		reg |= mask;
+	else if (crypto->cmd == DISABLE_KEY)
+		reg &= ~mask;
+	rt73usb_register_write(rt2x00dev, SEC_CSR0, reg);
+
+	return 0;
+}
+
+static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
+				       struct rt2x00lib_crypto *crypto,
+				       struct ieee80211_key_conf *key)
+{
+	struct hw_pairwise_ta_entry addr_entry;
+	struct hw_key_entry key_entry;
+	int timeout;
+	u32 mask;
+	u32 reg;
+
+	if (crypto->cmd == SET_KEY) {
+		/*
+		 * rt2x00lib can't determine the correct free
+		 * key_idx for pairwise keys. We have 2 registers
+		 * with key valid bits. The goal is simple, read
+		 * the first register, if that is full move to
+		 * the next register.
+		 * When both registers are full, we drop the key,
+		 * otherwise we use the first invalid entry.
+		 */
+		rt73usb_register_read(rt2x00dev, SEC_CSR2, &reg);
+		if (reg && reg == ~0) {
+			key->hw_key_idx = 32;
+			rt73usb_register_read(rt2x00dev, SEC_CSR3, &reg);
+			if (reg && reg == ~0)
+				return -ENOSPC;
+		}
+
+		key->hw_key_idx += reg ? ffz(reg) : 0;
+
+		/*
+		 * Upload key to hardware
+		 */
+		memcpy(key_entry.key, crypto->key,
+		       sizeof(key_entry.key));
+		memcpy(key_entry.tx_mic, crypto->tx_mic,
+		       sizeof(key_entry.tx_mic));
+		memcpy(key_entry.rx_mic, crypto->rx_mic,
+		       sizeof(key_entry.rx_mic));
+
+		reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
+		timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
+		rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
+						    USB_VENDOR_REQUEST_OUT, reg,
+						    &key_entry,
+						    sizeof(key_entry),
+						    timeout);
+
+		/*
+		 * Send the address and cipher type to the hardware register.
+		 * This data fits within the CSR cache size, so we can use
+		 * rt73usb_register_multiwrite() directly.
+		 */
+		memset(&addr_entry, 0, sizeof(addr_entry));
+		memcpy(&addr_entry, crypto->address, ETH_ALEN);
+		addr_entry.cipher = crypto->cipher;
+
+		reg = PAIRWISE_TA_ENTRY(key->hw_key_idx);
+		rt73usb_register_multiwrite(rt2x00dev, reg,
+					    &addr_entry, sizeof(addr_entry));
+
+		/*
+		 * Enable pairwise lookup table for given BSS idx,
+		 * without this received frames will not be decrypted
+		 * by the hardware.
+		 */
+		rt73usb_register_read(rt2x00dev, SEC_CSR4, &reg);
+		reg |= (1 << crypto->bssidx);
+		rt73usb_register_write(rt2x00dev, SEC_CSR4, reg);
+
+		/*
+		 * The driver does not support the IV/EIV generation
+		 * in hardware. However it doesn't support the IV/EIV
+		 * inside the ieee80211 frame either, but requires it
+		 * to be provided seperately for the descriptor.
+		 * rt2x00lib will cut the IV/EIV data out of all frames
+		 * given to us by mac80211, but we must tell mac80211
+		 * to generate the IV/EIV data.
+		 */
+		key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+	}
+
+	/*
+	 * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate
+	 * a particular key is valid. Because using the FIELD32()
+	 * defines directly will cause a lot of overhead we use
+	 * a calculation to determine the correct bit directly.
+	 */
+	if (key->hw_key_idx < 32) {
+		mask = 1 << key->hw_key_idx;
+
+		rt73usb_register_read(rt2x00dev, SEC_CSR2, &reg);
+		if (crypto->cmd == SET_KEY)
+			reg |= mask;
+		else if (crypto->cmd == DISABLE_KEY)
+			reg &= ~mask;
+		rt73usb_register_write(rt2x00dev, SEC_CSR2, reg);
+	} else {
+		mask = 1 << (key->hw_key_idx - 32);
+
+		rt73usb_register_read(rt2x00dev, SEC_CSR3, &reg);
+		if (crypto->cmd == SET_KEY)
+			reg |= mask;
+		else if (crypto->cmd == DISABLE_KEY)
+			reg &= ~mask;
+		rt73usb_register_write(rt2x00dev, SEC_CSR3, reg);
+	}
+
+	return 0;
+}
+
 static void rt73usb_config_filter(struct rt2x00_dev *rt2x00dev,
 				  const unsigned int filter_flags)
 {
@@ -451,6 +671,26 @@ static void rt73usb_config_erp(struct rt2x00_dev *rt2x00dev,
 	rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg);
 }
 
+static void rt73usb_config_lna_gain(struct rt2x00_dev *rt2x00dev,
+				    struct rt2x00lib_conf *libconf)
+{
+	u16 eeprom;
+	short lna_gain = 0;
+
+	if (libconf->band == IEEE80211_BAND_2GHZ) {
+		if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
+			lna_gain += 14;
+
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
+		lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
+	} else {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
+		lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
+	}
+
+	rt2x00dev->lna_gain = lna_gain;
+}
+
 static void rt73usb_config_phymode(struct rt2x00_dev *rt2x00dev,
 				   const int basic_rate_mask)
 {
@@ -705,6 +945,9 @@ static void rt73usb_config(struct rt2x00_dev *rt2x00dev,
 			   struct rt2x00lib_conf *libconf,
 			   const unsigned int flags)
 {
+	/* Always recalculate LNA gain before changing configuration */
+	rt73usb_config_lna_gain(rt2x00dev, libconf);
+
 	if (flags & CONFIG_UPDATE_PHYMODE)
 		rt73usb_config_phymode(rt2x00dev, libconf->basic_rates);
 	if (flags & CONFIG_UPDATE_CHANNEL)
@@ -1034,16 +1277,6 @@ static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev)
 	rt73usb_register_write(rt2x00dev, PHY_CSR6, 0x00080606);
 	rt73usb_register_write(rt2x00dev, PHY_CSR7, 0x00000408);
 
-	rt73usb_register_read(rt2x00dev, AC_TXOP_CSR0, &reg);
-	rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC0_TX_OP, 0);
-	rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC1_TX_OP, 0);
-	rt73usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
-
-	rt73usb_register_read(rt2x00dev, AC_TXOP_CSR1, &reg);
-	rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC2_TX_OP, 192);
-	rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC3_TX_OP, 48);
-	rt73usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
-
 	rt73usb_register_read(rt2x00dev, MAC_CSR9, &reg);
 	rt2x00_set_field32(&reg, MAC_CSR9_CW_SELECT, 0);
 	rt73usb_register_write(rt2x00dev, MAC_CSR9, reg);
@@ -1265,8 +1498,8 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev,
  * TX descriptor initialization
  */
 static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
-				    struct sk_buff *skb,
-				    struct txentry_desc *txdesc)
+				  struct sk_buff *skb,
+				  struct txentry_desc *txdesc)
 {
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
 	__le32 *txd = skbdesc->desc;
@@ -1280,7 +1513,7 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs);
 	rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
 	rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
-	rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
+	rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
 	rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
 			   test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
 	rt2x00_desc_write(txd, 1, word);
@@ -1292,6 +1525,11 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
 	rt2x00_desc_write(txd, 2, word);
 
+	if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) {
+		_rt2x00_desc_write(txd, 3, skbdesc->iv);
+		_rt2x00_desc_write(txd, 4, skbdesc->eiv);
+	}
+
 	rt2x00_desc_read(txd, 5, &word);
 	rt2x00_set_field32(&word, TXD_W5_TX_POWER,
 			   TXPOWER_TO_DEV(rt2x00dev->tx_power));
@@ -1313,12 +1551,15 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 	rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
 	rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
 			   test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
-	rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0);
-	rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT,
-			   skb->len - skbdesc->desc_len);
+	rt2x00_set_field32(&word, TXD_W0_TKIP_MIC,
+			   test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags));
+	rt2x00_set_field32(&word, TXD_W0_KEY_TABLE,
+			   test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags));
+	rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx);
+	rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
 	rt2x00_set_field32(&word, TXD_W0_BURST2,
 			   test_bit(ENTRY_TXD_BURST, &txdesc->flags));
-	rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
+	rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher);
 	rt2x00_desc_write(txd, 0, word);
 }
 
@@ -1331,7 +1572,6 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 	unsigned int beacon_base;
 	u32 reg;
-	u32 word, len;
 
 	/*
 	 * Add the descriptor in front of the skb.
@@ -1341,17 +1581,6 @@ static void rt73usb_write_beacon(struct queue_entry *entry)
 	skbdesc->desc = entry->skb->data;
 
 	/*
-	 * Adjust the beacon databyte count. The current number is
-	 * calculated before this function gets called, but falsely
-	 * assumes that the descriptor was already present in the SKB.
-	 */
-	rt2x00_desc_read(skbdesc->desc, 0, &word);
-	len  = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT);
-	len += skbdesc->desc_len;
-	rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len);
-	rt2x00_desc_write(skbdesc->desc, 0, word);
-
-	/*
 	 * Disable beaconing while we are reloading the beacon data,
 	 * otherwise we might be sending out invalid data.
 	 */
@@ -1422,20 +1651,19 @@ static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
  */
 static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
 {
-	u16 eeprom;
-	u8 offset;
+	u8 offset = rt2x00dev->lna_gain;
 	u8 lna;
 
 	lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA);
 	switch (lna) {
 	case 3:
-		offset = 90;
+		offset += 90;
 		break;
 	case 2:
-		offset = 74;
+		offset += 74;
 		break;
 	case 1:
-		offset = 64;
+		offset += 64;
 		break;
 	default:
 		return 0;
@@ -1451,15 +1679,6 @@ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
 			else if (lna == 2)
 				offset += 8;
 		}
-
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
-		offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
-	} else {
-		if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
-			offset += 14;
-
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
-		offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
 	}
 
 	return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
@@ -1468,6 +1687,7 @@ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
 static void rt73usb_fill_rxdone(struct queue_entry *entry,
 			        struct rxdone_entry_desc *rxdesc)
 {
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 	__le32 *rxd = (__le32 *)entry->skb->data;
 	u32 word0;
@@ -1489,6 +1709,38 @@ static void rt73usb_fill_rxdone(struct queue_entry *entry,
 	if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
 		rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
 
+	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
+		rxdesc->cipher =
+		    rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG);
+		rxdesc->cipher_status =
+		    rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR);
+	}
+
+	if (rxdesc->cipher != CIPHER_NONE) {
+		_rt2x00_desc_read(rxd, 2, &rxdesc->iv);
+		_rt2x00_desc_read(rxd, 3, &rxdesc->eiv);
+		_rt2x00_desc_read(rxd, 4, &rxdesc->icv);
+
+		/*
+		 * Hardware has stripped IV/EIV data from 802.11 frame during
+		 * decryption. It has provided the data seperately but rt2x00lib
+		 * should decide if it should be reinserted.
+		 */
+		rxdesc->flags |= RX_FLAG_IV_STRIPPED;
+
+		/*
+		 * FIXME: Legacy driver indicates that the frame does
+		 * contain the Michael Mic. Unfortunately, in rt2x00
+		 * the MIC seems to be missing completely...
+		 */
+		rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
+
+		if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
+			rxdesc->flags |= RX_FLAG_DECRYPTED;
+		else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
+			rxdesc->flags |= RX_FLAG_MMIC_ERROR;
+	}
+
 	/*
 	 * Obtain the status about this packet.
 	 * When frame was received with an OFDM bitrate,
@@ -1496,11 +1748,13 @@ static void rt73usb_fill_rxdone(struct queue_entry *entry,
 	 * a CCK bitrate the signal is the rate in 100kbit/s.
 	 */
 	rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
-	rxdesc->rssi = rt73usb_agc_to_rssi(entry->queue->rt2x00dev, word1);
+	rxdesc->rssi = rt73usb_agc_to_rssi(rt2x00dev, word1);
 	rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
 
 	if (rt2x00_get_field32(word0, RXD_W0_OFDM))
 		rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
+	else
+		rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
 	if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
 		rxdesc->dev_flags |= RXDONE_MY_BSS;
 
@@ -1678,7 +1932,7 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Store led settings, for correct led behaviour.
 	 */
-#ifdef CONFIG_RT73USB_LEDS
+#ifdef CONFIG_RT2X00_LIB_LEDS
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom);
 
 	rt73usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
@@ -1711,7 +1965,7 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A,
 			   rt2x00_get_field16(eeprom,
 					      EEPROM_LED_POLARITY_RDY_A));
-#endif /* CONFIG_RT73USB_LEDS */
+#endif /* CONFIG_RT2X00_LIB_LEDS */
 
 	return 0;
 }
@@ -1852,10 +2106,11 @@ static const struct rf_channel rf_vals_5225_2527[] = {
 };
 
 
-static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 {
 	struct hw_mode_spec *spec = &rt2x00dev->spec;
-	u8 *txpower;
+	struct channel_info *info;
+	char *tx_power;
 	unsigned int i;
 
 	/*
@@ -1872,20 +2127,10 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 						   EEPROM_MAC_ADDR_0));
 
 	/*
-	 * Convert tx_power array in eeprom.
-	 */
-	txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
-	for (i = 0; i < 14; i++)
-		txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
-
-	/*
 	 * Initialize hw_mode information.
 	 */
 	spec->supported_bands = SUPPORT_BAND_2GHZ;
 	spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
-	spec->tx_power_a = NULL;
-	spec->tx_power_bg = txpower;
-	spec->tx_power_default = DEFAULT_TXPOWER;
 
 	if (rt2x00_rf(&rt2x00dev->chip, RF2528)) {
 		spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528);
@@ -1903,14 +2148,26 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 		spec->channels = rf_vals_5225_2527;
 	}
 
-	if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
-	    rt2x00_rf(&rt2x00dev->chip, RF5226)) {
-		txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
-		for (i = 0; i < 14; i++)
-			txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
+	/*
+	 * Create channel information array
+	 */
+	info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
 
-		spec->tx_power_a = txpower;
+	spec->channels_info = info;
+
+	tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
+	for (i = 0; i < 14; i++)
+		info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
+
+	if (spec->num_channels > 14) {
+		tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
+		for (i = 14; i < spec->num_channels; i++)
+			info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
 	}
+
+	return 0;
 }
 
 static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
@@ -1931,13 +2188,17 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Initialize hw specifications.
 	 */
-	rt73usb_probe_hw_mode(rt2x00dev);
+	retval = rt73usb_probe_hw_mode(rt2x00dev);
+	if (retval)
+		return retval;
 
 	/*
 	 * This device requires firmware.
 	 */
 	__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
 	__set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
+	if (!modparam_nohwcrypt)
+		__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
 
 	/*
 	 * Set the rssi offset.
@@ -1964,6 +2225,63 @@ static int rt73usb_set_retry_limit(struct ieee80211_hw *hw,
 	return 0;
 }
 
+static int rt73usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
+			   const struct ieee80211_tx_queue_params *params)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	struct data_queue *queue;
+	struct rt2x00_field32 field;
+	int retval;
+	u32 reg;
+
+	/*
+	 * First pass the configuration through rt2x00lib, that will
+	 * update the queue settings and validate the input. After that
+	 * we are free to update the registers based on the value
+	 * in the queue parameter.
+	 */
+	retval = rt2x00mac_conf_tx(hw, queue_idx, params);
+	if (retval)
+		return retval;
+
+	queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
+
+	/* Update WMM TXOP register */
+	if (queue_idx < 2) {
+		field.bit_offset = queue_idx * 16;
+		field.bit_mask = 0xffff << field.bit_offset;
+
+		rt73usb_register_read(rt2x00dev, AC_TXOP_CSR0, &reg);
+		rt2x00_set_field32(&reg, field, queue->txop);
+		rt73usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
+	} else if (queue_idx < 4) {
+		field.bit_offset = (queue_idx - 2) * 16;
+		field.bit_mask = 0xffff << field.bit_offset;
+
+		rt73usb_register_read(rt2x00dev, AC_TXOP_CSR1, &reg);
+		rt2x00_set_field32(&reg, field, queue->txop);
+		rt73usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
+	}
+
+	/* Update WMM registers */
+	field.bit_offset = queue_idx * 4;
+	field.bit_mask = 0xf << field.bit_offset;
+
+	rt73usb_register_read(rt2x00dev, AIFSN_CSR, &reg);
+	rt2x00_set_field32(&reg, field, queue->aifs);
+	rt73usb_register_write(rt2x00dev, AIFSN_CSR, reg);
+
+	rt73usb_register_read(rt2x00dev, CWMIN_CSR, &reg);
+	rt2x00_set_field32(&reg, field, queue->cw_min);
+	rt73usb_register_write(rt2x00dev, CWMIN_CSR, reg);
+
+	rt73usb_register_read(rt2x00dev, CWMAX_CSR, &reg);
+	rt2x00_set_field32(&reg, field, queue->cw_max);
+	rt73usb_register_write(rt2x00dev, CWMAX_CSR, reg);
+
+	return 0;
+}
+
 #if 0
 /*
  * Mac80211 demands get_tsf must be atomic.
@@ -1997,10 +2315,11 @@ static const struct ieee80211_ops rt73usb_mac80211_ops = {
 	.config			= rt2x00mac_config,
 	.config_interface	= rt2x00mac_config_interface,
 	.configure_filter	= rt2x00mac_configure_filter,
+	.set_key		= rt2x00mac_set_key,
 	.get_stats		= rt2x00mac_get_stats,
 	.set_retry_limit	= rt73usb_set_retry_limit,
 	.bss_info_changed	= rt2x00mac_bss_info_changed,
-	.conf_tx		= rt2x00mac_conf_tx,
+	.conf_tx		= rt73usb_conf_tx,
 	.get_tx_stats		= rt2x00mac_get_tx_stats,
 	.get_tsf		= rt73usb_get_tsf,
 };
@@ -2024,6 +2343,8 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
 	.get_tx_data_len	= rt73usb_get_tx_data_len,
 	.kick_tx_queue		= rt73usb_kick_tx_queue,
 	.fill_rxdone		= rt73usb_fill_rxdone,
+	.config_shared_key	= rt73usb_config_shared_key,
+	.config_pairwise_key	= rt73usb_config_pairwise_key,
 	.config_filter		= rt73usb_config_filter,
 	.config_intf		= rt73usb_config_intf,
 	.config_erp		= rt73usb_config_erp,
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
index 14849350101..868386c457f 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -92,6 +92,16 @@
 #define PAIRWISE_KEY_TABLE_BASE		0x1200
 #define PAIRWISE_TA_TABLE_BASE		0x1a00
 
+#define SHARED_KEY_ENTRY(__idx) \
+	( SHARED_KEY_TABLE_BASE + \
+		((__idx) * sizeof(struct hw_key_entry)) )
+#define PAIRWISE_KEY_ENTRY(__idx) \
+	( PAIRWISE_KEY_TABLE_BASE + \
+		((__idx) * sizeof(struct hw_key_entry)) )
+#define PAIRWISE_TA_ENTRY(__idx) \
+	( PAIRWISE_TA_TABLE_BASE + \
+		((__idx) * sizeof(struct hw_pairwise_ta_entry)) )
+
 struct hw_key_entry {
 	u8 key[16];
 	u8 tx_mic[8];
@@ -100,7 +110,8 @@ struct hw_key_entry {
 
 struct hw_pairwise_ta_entry {
 	u8 address[6];
-	u8 reserved[2];
+	u8 cipher;
+	u8 reserved;
 } __attribute__ ((packed));
 
 /*
@@ -563,6 +574,10 @@ struct hw_pairwise_ta_entry {
  * SEC_CSR4: Pairwise key table lookup control.
  */
 #define SEC_CSR4			0x30b0
+#define SEC_CSR4_ENABLE_BSS0		FIELD32(0x00000001)
+#define SEC_CSR4_ENABLE_BSS1		FIELD32(0x00000002)
+#define SEC_CSR4_ENABLE_BSS2		FIELD32(0x00000004)
+#define SEC_CSR4_ENABLE_BSS3		FIELD32(0x00000008)
 
 /*
  * SEC_CSR5: shared key table security mode register.
@@ -1010,8 +1025,10 @@ struct hw_pairwise_ta_entry {
 
 /*
  * Word4
+ * ICV: Received ICV of originally encrypted.
+ * NOTE: This is a guess, the official definition is "reserved"
  */
-#define RXD_W4_RESERVED			FIELD32(0xffffffff)
+#define RXD_W4_ICV			FIELD32(0xffffffff)
 
 /*
  * the above 20-byte is called RXINFO and will be DMAed to MAC RX block
@@ -1033,17 +1050,10 @@ struct hw_pairwise_ta_entry {
 #define MAX_TXPOWER	31
 #define DEFAULT_TXPOWER	24
 
-#define TXPOWER_FROM_DEV(__txpower)		\
-({						\
-	((__txpower) > MAX_TXPOWER) ?		\
-		DEFAULT_TXPOWER : (__txpower);	\
-})
-
-#define TXPOWER_TO_DEV(__txpower)			\
-({							\
-	((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER :	\
-	(((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER :	\
-	(__txpower));					\
-})
+#define TXPOWER_FROM_DEV(__txpower) \
+	(((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_TO_DEV(__txpower) \
+	clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
 
 #endif /* RT73USB_H */