Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

9 files changed, 153 insertions, 92 deletions

diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index dfc886fcb44..458378c4e50 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -835,7 +835,6 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry,
 				  struct rxdone_entry_desc *rxdesc)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 	struct queue_entry_priv_pci *entry_priv = entry->priv_data;
 	__le32 *rxd = entry_priv->desc;
 	__le32 *rxwi = (__le32 *)entry->skb->data;
@@ -883,10 +882,8 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry,
 	if (rt2x00_get_field32(rxd3, RXD_W3_MY_BSS))
 		rxdesc->dev_flags |= RXDONE_MY_BSS;
 
-	if (rt2x00_get_field32(rxd3, RXD_W3_L2PAD)) {
+	if (rt2x00_get_field32(rxd3, RXD_W3_L2PAD))
 		rxdesc->dev_flags |= RXDONE_L2PAD;
-		skbdesc->flags |= SKBDESC_L2_PADDED;
-	}
 
 	if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI))
 		rxdesc->flags |= RX_FLAG_SHORT_GI;
@@ -927,7 +924,6 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry,
 	 * Remove TXWI descriptor from start of buffer.
 	 */
 	skb_pull(entry->skb, RXWI_DESC_SIZE);
-	skb_trim(entry->skb, rxdesc->size);
 }
 
 /*
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index af85d18cdbe..40295b454ff 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -295,9 +295,7 @@ static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 
 	rt2800_register_read(rt2x00dev, USB_DMA_CFG, &reg);
 	rt2x00_set_field32(&reg, USB_DMA_CFG_PHY_CLEAR, 0);
-	/* Don't use bulk in aggregation when working with USB 1.1 */
-	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_EN,
-			   (rt2x00dev->rx->usb_maxpacket == 512));
+	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_EN, 0);
 	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_TIMEOUT, 128);
 	/*
 	 * Total room for RX frames in kilobytes, PBF might still exceed
@@ -573,41 +571,57 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
-	__le32 *rxd = (__le32 *)entry->skb->data;
+	__le32 *rxi = (__le32 *)entry->skb->data;
 	__le32 *rxwi;
-	u32 rxd0;
+	__le32 *rxd;
+	u32 rxi0;
 	u32 rxwi0;
 	u32 rxwi1;
 	u32 rxwi2;
 	u32 rxwi3;
+	u32 rxd0;
+	int rx_pkt_len;
+
+	/*
+	 * RX frame format is :
+	 * | RXINFO | RXWI | header | L2 pad | payload | pad | RXD | USB pad |
+	 *          |<------------ rx_pkt_len -------------->|
+	 */
+	rt2x00_desc_read(rxi, 0, &rxi0);
+	rx_pkt_len = rt2x00_get_field32(rxi0, RXINFO_W0_USB_DMA_RX_PKT_LEN);
+
+	rxwi = (__le32 *)(entry->skb->data + RXINFO_DESC_SIZE);
+
+	/*
+	 * FIXME : we need to check for rx_pkt_len validity
+	 */
+	rxd = (__le32 *)(entry->skb->data + RXINFO_DESC_SIZE + rx_pkt_len);
 
 	/*
 	 * Copy descriptor to the skbdesc->desc buffer, making it safe from
 	 * moving of frame data in rt2x00usb.
 	 */
-	memcpy(skbdesc->desc, rxd, skbdesc->desc_len);
-	rxd = (__le32 *)skbdesc->desc;
-	rxwi = &rxd[RXINFO_DESC_SIZE / sizeof(__le32)];
+	memcpy(skbdesc->desc, rxi, skbdesc->desc_len);
 
 	/*
 	 * It is now safe to read the descriptor on all architectures.
 	 */
-	rt2x00_desc_read(rxd, 0, &rxd0);
 	rt2x00_desc_read(rxwi, 0, &rxwi0);
 	rt2x00_desc_read(rxwi, 1, &rxwi1);
 	rt2x00_desc_read(rxwi, 2, &rxwi2);
 	rt2x00_desc_read(rxwi, 3, &rxwi3);
+	rt2x00_desc_read(rxd, 0, &rxd0);
 
-	if (rt2x00_get_field32(rxd0, RXINFO_W0_CRC_ERROR))
+	if (rt2x00_get_field32(rxd0, RXD_W0_CRC_ERROR))
 		rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
 
 	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
 		rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
 		rxdesc->cipher_status =
-		    rt2x00_get_field32(rxd0, RXINFO_W0_CIPHER_ERROR);
+		    rt2x00_get_field32(rxd0, RXD_W0_CIPHER_ERROR);
 	}
 
-	if (rt2x00_get_field32(rxd0, RXINFO_W0_DECRYPTED)) {
+	if (rt2x00_get_field32(rxd0, RXD_W0_DECRYPTED)) {
 		/*
 		 * Hardware has stripped IV/EIV data from 802.11 frame during
 		 * decryption. Unfortunately the descriptor doesn't contain
@@ -622,13 +636,11 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
 			rxdesc->flags |= RX_FLAG_MMIC_ERROR;
 	}
 
-	if (rt2x00_get_field32(rxd0, RXINFO_W0_MY_BSS))
+	if (rt2x00_get_field32(rxd0, RXD_W0_MY_BSS))
 		rxdesc->dev_flags |= RXDONE_MY_BSS;
 
-	if (rt2x00_get_field32(rxd0, RXINFO_W0_L2PAD)) {
+	if (rt2x00_get_field32(rxd0, RXD_W0_L2PAD))
 		rxdesc->dev_flags |= RXDONE_L2PAD;
-		skbdesc->flags |= SKBDESC_L2_PADDED;
-	}
 
 	if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI))
 		rxdesc->flags |= RX_FLAG_SHORT_GI;
@@ -663,7 +675,6 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
 	 * Remove RXWI descriptor from start of buffer.
 	 */
 	skb_pull(entry->skb, skbdesc->desc_len);
-	skb_trim(entry->skb, rxdesc->size);
 }
 
 /*
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.h b/drivers/net/wireless/rt2x00/rt2800usb.h
index 1e4340a182e..d1d8ae94b4d 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.h
+++ b/drivers/net/wireless/rt2x00/rt2800usb.h
@@ -79,6 +79,8 @@
  */
 #define TXINFO_DESC_SIZE		( 1 * sizeof(__le32) )
 #define RXINFO_DESC_SIZE		( 1 * sizeof(__le32) )
+#define RXWI_DESC_SIZE			( 4 * sizeof(__le32) )
+#define RXD_DESC_SIZE			( 1 * sizeof(__le32) )
 
 /*
  * TX Info structure
@@ -101,6 +103,54 @@
 #define TXINFO_W0_USB_DMA_TX_BURST	FIELD32(0x80000000)
 
 /*
+ * RX Info structure
+ */
+
+/*
+ * Word 0
+ */
+
+#define RXINFO_W0_USB_DMA_RX_PKT_LEN	FIELD32(0x0000ffff)
+
+/*
+ * RX WI structure
+ */
+
+/*
+ * Word0
+ */
+#define RXWI_W0_WIRELESS_CLI_ID		FIELD32(0x000000ff)
+#define RXWI_W0_KEY_INDEX		FIELD32(0x00000300)
+#define RXWI_W0_BSSID			FIELD32(0x00001c00)
+#define RXWI_W0_UDF			FIELD32(0x0000e000)
+#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT	FIELD32(0x0fff0000)
+#define RXWI_W0_TID			FIELD32(0xf0000000)
+
+/*
+ * Word1
+ */
+#define RXWI_W1_FRAG			FIELD32(0x0000000f)
+#define RXWI_W1_SEQUENCE		FIELD32(0x0000fff0)
+#define RXWI_W1_MCS			FIELD32(0x007f0000)
+#define RXWI_W1_BW			FIELD32(0x00800000)
+#define RXWI_W1_SHORT_GI		FIELD32(0x01000000)
+#define RXWI_W1_STBC			FIELD32(0x06000000)
+#define RXWI_W1_PHYMODE			FIELD32(0xc0000000)
+
+/*
+ * Word2
+ */
+#define RXWI_W2_RSSI0			FIELD32(0x000000ff)
+#define RXWI_W2_RSSI1			FIELD32(0x0000ff00)
+#define RXWI_W2_RSSI2			FIELD32(0x00ff0000)
+
+/*
+ * Word3
+ */
+#define RXWI_W3_SNR0			FIELD32(0x000000ff)
+#define RXWI_W3_SNR1			FIELD32(0x0000ff00)
+
+/*
  * RX descriptor format for RX Ring.
  */
 
@@ -115,25 +165,25 @@
  * AMSDU: rx with 802.3 header, not 802.11 header.
  */
 
-#define RXINFO_W0_BA			FIELD32(0x00000001)
-#define RXINFO_W0_DATA			FIELD32(0x00000002)
-#define RXINFO_W0_NULLDATA		FIELD32(0x00000004)
-#define RXINFO_W0_FRAG			FIELD32(0x00000008)
-#define RXINFO_W0_UNICAST_TO_ME		FIELD32(0x00000010)
-#define RXINFO_W0_MULTICAST		FIELD32(0x00000020)
-#define RXINFO_W0_BROADCAST		FIELD32(0x00000040)
-#define RXINFO_W0_MY_BSS		FIELD32(0x00000080)
-#define RXINFO_W0_CRC_ERROR		FIELD32(0x00000100)
-#define RXINFO_W0_CIPHER_ERROR		FIELD32(0x00000600)
-#define RXINFO_W0_AMSDU			FIELD32(0x00000800)
-#define RXINFO_W0_HTC			FIELD32(0x00001000)
-#define RXINFO_W0_RSSI			FIELD32(0x00002000)
-#define RXINFO_W0_L2PAD			FIELD32(0x00004000)
-#define RXINFO_W0_AMPDU			FIELD32(0x00008000)
-#define RXINFO_W0_DECRYPTED		FIELD32(0x00010000)
-#define RXINFO_W0_PLCP_RSSI		FIELD32(0x00020000)
-#define RXINFO_W0_CIPHER_ALG		FIELD32(0x00040000)
-#define RXINFO_W0_LAST_AMSDU		FIELD32(0x00080000)
-#define RXINFO_W0_PLCP_SIGNAL		FIELD32(0xfff00000)
+#define RXD_W0_BA			FIELD32(0x00000001)
+#define RXD_W0_DATA			FIELD32(0x00000002)
+#define RXD_W0_NULLDATA			FIELD32(0x00000004)
+#define RXD_W0_FRAG			FIELD32(0x00000008)
+#define RXD_W0_UNICAST_TO_ME		FIELD32(0x00000010)
+#define RXD_W0_MULTICAST		FIELD32(0x00000020)
+#define RXD_W0_BROADCAST		FIELD32(0x00000040)
+#define RXD_W0_MY_BSS			FIELD32(0x00000080)
+#define RXD_W0_CRC_ERROR		FIELD32(0x00000100)
+#define RXD_W0_CIPHER_ERROR		FIELD32(0x00000600)
+#define RXD_W0_AMSDU			FIELD32(0x00000800)
+#define RXD_W0_HTC			FIELD32(0x00001000)
+#define RXD_W0_RSSI			FIELD32(0x00002000)
+#define RXD_W0_L2PAD			FIELD32(0x00004000)
+#define RXD_W0_AMPDU			FIELD32(0x00008000)
+#define RXD_W0_DECRYPTED		FIELD32(0x00010000)
+#define RXD_W0_PLCP_RSSI		FIELD32(0x00020000)
+#define RXD_W0_CIPHER_ALG		FIELD32(0x00040000)
+#define RXD_W0_LAST_AMSDU		FIELD32(0x00080000)
+#define RXD_W0_PLCP_SIGNAL		FIELD32(0xfff00000)
 
 #endif /* RT2800USB_H */
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 4d841c07c97..194dae01d0c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -104,6 +104,12 @@
 #define GET_DURATION_RES(__size, __rate)(((__size) * 8 * 10) % (__rate))
 
 /*
+ * Determine the number of L2 padding bytes required between the header and
+ * the payload.
+ */
+#define L2PAD_SIZE(__hdrlen)	(-(__hdrlen) & 3)
+
+/*
  * Determine the alignment requirement,
  * to make sure the 802.11 payload is padded to a 4-byte boundrary
  * we must determine the address of the payload and calculate the
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 06c43ca39bf..d7711e4d475 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -385,9 +385,6 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 	memset(&rxdesc, 0, sizeof(rxdesc));
 	rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc);
 
-	/* Trim buffer to correct size */
-	skb_trim(entry->skb, rxdesc.size);
-
 	/*
 	 * The data behind the ieee80211 header must be
 	 * aligned on a 4 byte boundary.
@@ -404,11 +401,16 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 	    (rxdesc.flags & RX_FLAG_IV_STRIPPED))
 		rt2x00crypto_rx_insert_iv(entry->skb, header_length,
 					  &rxdesc);
-	else if (rxdesc.dev_flags & RXDONE_L2PAD)
+	else if (header_length &&
+		 (rxdesc.size > header_length) &&
+		 (rxdesc.dev_flags & RXDONE_L2PAD))
 		rt2x00queue_remove_l2pad(entry->skb, header_length);
 	else
 		rt2x00queue_align_payload(entry->skb, header_length);
 
+	/* Trim buffer to correct size */
+	skb_trim(entry->skb, rxdesc.size);
+
 	/*
 	 * Check if the frame was received using HT. In that case,
 	 * the rate is the MCS index and should be passed to mac80211
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index 0feb4d0e466..801be436cf1 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -41,6 +41,9 @@ int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev,
 {
 	unsigned int i;
 
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+		return 0;
+
 	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 		rt2x00pci_register_read(rt2x00dev, offset, reg);
 		if (!rt2x00_get_field32(*reg, field))
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 239afc7a9c0..3d8fb684b4e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -177,55 +177,45 @@ void rt2x00queue_align_payload(struct sk_buff *skb, unsigned int header_length)
 
 void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length)
 {
-	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
-	unsigned int frame_length = skb->len;
+	unsigned int payload_length = skb->len - header_length;
 	unsigned int header_align = ALIGN_SIZE(skb, 0);
 	unsigned int payload_align = ALIGN_SIZE(skb, header_length);
-	unsigned int l2pad = 4 - (payload_align - header_align);
+	unsigned int l2pad = payload_length ? L2PAD_SIZE(header_length) : 0;
 
-	if (header_align == payload_align) {
-		/*
-		 * Both header and payload must be moved the same
-		 * amount of bytes to align them properly. This means
-		 * we don't use the L2 padding but just move the entire
-		 * frame.
-		 */
-		rt2x00queue_align_frame(skb);
-	} else if (!payload_align) {
-		/*
-		 * Simple L2 padding, only the header needs to be moved,
-		 * the payload is already properly aligned.
-		 */
-		skb_push(skb, header_align);
-		memmove(skb->data, skb->data + header_align, frame_length);
-		skbdesc->flags |= SKBDESC_L2_PADDED;
-	} else {
-		/*
-		 *
-		 * Complicated L2 padding, both header and payload need
-		 * to be moved. By default we only move to the start
-		 * of the buffer, so our header alignment needs to be
-		 * increased if there is not enough room for the header
-		 * to be moved.
-		 */
-		if (payload_align > header_align)
-			header_align += 4;
+	/*
+	 * Adjust the header alignment if the payload needs to be moved more
+	 * than the header.
+	 */
+	if (payload_align > header_align)
+		header_align += 4;
+
+	/* There is nothing to do if no alignment is needed */
+	if (!header_align)
+		return;
+
+	/* Reserve the amount of space needed in front of the frame */
+	skb_push(skb, header_align);
+
+	/*
+	 * Move the header.
+	 */
+	memmove(skb->data, skb->data + header_align, header_length);
 
-		skb_push(skb, header_align);
-		memmove(skb->data, skb->data + header_align, header_length);
+	/* Move the payload, if present and if required */
+	if (payload_length && payload_align)
 		memmove(skb->data + header_length + l2pad,
 			skb->data + header_length + l2pad + payload_align,
-			frame_length - header_length);
-		skbdesc->flags |= SKBDESC_L2_PADDED;
-	}
+			payload_length);
+
+	/* Trim the skb to the correct size */
+	skb_trim(skb, header_length + l2pad + payload_length);
 }
 
 void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int header_length)
 {
-	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
-	unsigned int l2pad = 4 - (header_length & 3);
+	unsigned int l2pad = L2PAD_SIZE(header_length);
 
-	if (!l2pad || (skbdesc->flags & SKBDESC_L2_PADDED))
+	if (!l2pad)
 		return;
 
 	memmove(skb->data + l2pad, skb->data, header_length);
@@ -346,7 +336,9 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	 * Header and alignment information.
 	 */
 	txdesc->header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
-	txdesc->l2pad = ALIGN_SIZE(entry->skb, txdesc->header_length);
+	if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags) &&
+	    (entry->skb->len > txdesc->header_length))
+		txdesc->l2pad = L2PAD_SIZE(txdesc->header_length);
 
 	/*
 	 * Check whether this frame is to be acked.
@@ -387,10 +379,13 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 
 	/*
 	 * Beacons and probe responses require the tsf timestamp
-	 * to be inserted into the frame.
+	 * to be inserted into the frame, except for a frame that has been injected
+	 * through a monitor interface. This latter is needed for testing a
+	 * monitor interface.
 	 */
-	if (ieee80211_is_beacon(hdr->frame_control) ||
-	    ieee80211_is_probe_resp(hdr->frame_control))
+	if ((ieee80211_is_beacon(hdr->frame_control) ||
+	    ieee80211_is_probe_resp(hdr->frame_control)) &&
+	    (!(tx_info->flags & IEEE80211_TX_CTL_INJECTED)))
 		__set_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags);
 
 	/*
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 70775e5ba1a..c1e482bb37b 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -92,8 +92,6 @@ enum data_queue_qid {
  * @SKBDESC_DMA_MAPPED_TX: &skb_dma field has been mapped for TX
  * @SKBDESC_IV_STRIPPED: Frame contained a IV/EIV provided by
  *	mac80211 but was stripped for processing by the driver.
- * @SKBDESC_L2_PADDED: Payload has been padded for 4-byte alignment,
- *	the padded bytes are located between header and payload.
  * @SKBDESC_NOT_MAC80211: Frame didn't originate from mac80211,
  *	don't try to pass it back.
  */
@@ -101,8 +99,7 @@ enum skb_frame_desc_flags {
 	SKBDESC_DMA_MAPPED_RX = 1 << 0,
 	SKBDESC_DMA_MAPPED_TX = 1 << 1,
 	SKBDESC_IV_STRIPPED = 1 << 2,
-	SKBDESC_L2_PADDED = 1 << 3,
-	SKBDESC_NOT_MAC80211 = 1 << 4,
+	SKBDESC_NOT_MAC80211 = 1 << 3,
 };
 
 /**
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index ced3b6ab5e1..6ce88d3c3b6 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2354,6 +2354,7 @@ static struct usb_device_id rt73usb_device_table[] = {
 	{ USB_DEVICE(0x08dd, 0x0120), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Buffalo */
 	{ USB_DEVICE(0x0411, 0x00d8), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x0411, 0x00d9), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0411, 0x0116), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0411, 0x0119), USB_DEVICE_DATA(&rt73usb_ops) },