Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem

Conflicts:
	drivers/net/wireless/libertas/if_sdio.c

17 files changed, 398 insertions, 236 deletions

diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 8ddaae44d7f..baadf03a800 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -355,7 +355,9 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
 		 * it is known that not work at least on some hardware.
 		 * SW crypto will be used in that case.
 		 */
-		if (key->alg == ALG_WEP && key->keyidx != 0)
+		if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
+		     key->cipher == WLAN_CIPHER_SUITE_WEP104) &&
+		    key->keyidx != 0)
 			return -EOPNOTSUPP;
 
 		/*
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index ed4ebcdde7c..cf1f16bfcd5 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -1318,7 +1318,25 @@
 #define TX_STA_CNT2_TX_UNDER_FLOW_COUNT	FIELD32(0xffff0000)
 
 /*
- * TX_STA_FIFO: TX Result for specific PID status fifo register
+ * TX_STA_FIFO: TX Result for specific PID status fifo register.
+ *
+ * This register is implemented as FIFO with 16 entries in the HW. Each
+ * register read fetches the next tx result. If the FIFO is full because
+ * it wasn't read fast enough after the according interrupt (TX_FIFO_STATUS)
+ * triggered, the hw seems to simply drop further tx results.
+ *
+ * VALID: 1: this tx result is valid
+ *        0: no valid tx result -> driver should stop reading
+ * PID_TYPE: The PID latched from the PID field in the TXWI, can be used
+ *           to match a frame with its tx result (even though the PID is
+ *           only 4 bits wide).
+ * TX_SUCCESS: Indicates tx success (1) or failure (0)
+ * TX_AGGRE: Indicates if the frame was part of an aggregate (1) or not (0)
+ * TX_ACK_REQUIRED: Indicates if the frame needed to get ack'ed (1) or not (0)
+ * WCID: The wireless client ID.
+ * MCS: The tx rate used during the last transmission of this frame, be it
+ *      successful or not.
+ * PHYMODE: The phymode used for the transmission.
  */
 #define TX_STA_FIFO			0x1718
 #define TX_STA_FIFO_VALID		FIELD32(0x00000001)
@@ -1945,6 +1963,13 @@ struct mac_iveiv_entry {
 
 /*
  * Word1
+ * ACK: 0: No Ack needed, 1: Ack needed
+ * NSEQ: 0: Don't assign hw sequence number, 1: Assign hw sequence number
+ * BW_WIN_SIZE: BA windows size of the recipient
+ * WIRELESS_CLI_ID: Client ID for WCID table access
+ * MPDU_TOTAL_BYTE_COUNT: Length of 802.11 frame
+ * PACKETID: Will be latched into the TX_STA_FIFO register once the according
+ *           frame was processed. 0: Don't report tx status for this frame.
  */
 #define TXWI_W1_ACK			FIELD32(0x00000001)
 #define TXWI_W1_NSEQ			FIELD32(0x00000002)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 8c00fbda866..6a0cb2d924d 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1,4 +1,5 @@
 /*
+	Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
 	Copyright (C) 2010 Ivo van Doorn <IvDoorn@gmail.com>
 	Copyright (C) 2009 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
 	Copyright (C) 2009 Gertjan van Wingerde <gwingerde@gmail.com>
@@ -427,8 +428,10 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
 }
 EXPORT_SYMBOL_GPL(rt2800_load_firmware);
 
-void rt2800_write_txwi(__le32 *txwi, struct txentry_desc *txdesc)
+void rt2800_write_tx_data(struct queue_entry *entry,
+			  struct txentry_desc *txdesc)
 {
+	__le32 *txwi = rt2800_drv_get_txwi(entry);
 	u32 word;
 
 	/*
@@ -437,7 +440,8 @@ void rt2800_write_txwi(__le32 *txwi, struct txentry_desc *txdesc)
 	rt2x00_desc_read(txwi, 0, &word);
 	rt2x00_set_field32(&word, TXWI_W0_FRAG,
 			   test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
-	rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0);
+	rt2x00_set_field32(&word, TXWI_W0_MIMO_PS,
+			   test_bit(ENTRY_TXD_HT_MIMO_PS, &txdesc->flags));
 	rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
 	rt2x00_set_field32(&word, TXWI_W0_TS,
 			   test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
@@ -478,7 +482,7 @@ void rt2800_write_txwi(__le32 *txwi, struct txentry_desc *txdesc)
 	_rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */);
 	_rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */);
 }
-EXPORT_SYMBOL_GPL(rt2800_write_txwi);
+EXPORT_SYMBOL_GPL(rt2800_write_tx_data);
 
 static int rt2800_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxwi_w2)
 {
@@ -490,7 +494,7 @@ static int rt2800_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxwi_w2)
 	u8 offset1;
 	u8 offset2;
 
-	if (rt2x00dev->rx_status.band == IEEE80211_BAND_2GHZ) {
+	if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
 		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &eeprom);
 		offset0 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET0);
 		offset1 = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG_OFFSET1);
@@ -569,6 +573,122 @@ void rt2800_process_rxwi(struct queue_entry *entry,
 }
 EXPORT_SYMBOL_GPL(rt2800_process_rxwi);
 
+void rt2800_txdone(struct rt2x00_dev *rt2x00dev)
+{
+	struct data_queue *queue;
+	struct queue_entry *entry;
+	__le32 *txwi;
+	struct txdone_entry_desc txdesc;
+	u32 word;
+	u32 reg;
+	int wcid, ack, pid, tx_wcid, tx_ack, tx_pid;
+	u16 mcs, real_mcs;
+	int i;
+
+	/*
+	 * TX_STA_FIFO is a stack of X entries, hence read TX_STA_FIFO
+	 * at most X times and also stop processing once the TX_STA_FIFO_VALID
+	 * flag is not set anymore.
+	 *
+	 * The legacy drivers use X=TX_RING_SIZE but state in a comment
+	 * that the TX_STA_FIFO stack has a size of 16. We stick to our
+	 * tx ring size for now.
+	 */
+	for (i = 0; i < TX_ENTRIES; i++) {
+		rt2800_register_read(rt2x00dev, TX_STA_FIFO, &reg);
+		if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID))
+			break;
+
+		wcid	= rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
+		ack	= rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
+		pid	= rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
+
+		/*
+		 * Skip this entry when it contains an invalid
+		 * queue identication number.
+		 */
+		if (pid <= 0 || pid > QID_RX)
+			continue;
+
+		queue = rt2x00queue_get_queue(rt2x00dev, pid - 1);
+		if (unlikely(!queue))
+			continue;
+
+		/*
+		 * Inside each queue, we process each entry in a chronological
+		 * order. We first check that the queue is not empty.
+		 */
+		entry = NULL;
+		while (!rt2x00queue_empty(queue)) {
+			entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
+			if (!test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
+				break;
+
+			rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
+		}
+
+		if (!entry || rt2x00queue_empty(queue))
+			break;
+
+		/*
+		 * Check if we got a match by looking at WCID/ACK/PID
+		 * fields
+		 */
+		txwi = rt2800_drv_get_txwi(entry);
+
+		rt2x00_desc_read(txwi, 1, &word);
+		tx_wcid	= rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID);
+		tx_ack	= rt2x00_get_field32(word, TXWI_W1_ACK);
+		tx_pid	= rt2x00_get_field32(word, TXWI_W1_PACKETID);
+
+		if ((wcid != tx_wcid) || (ack != tx_ack) || (pid != tx_pid))
+			WARNING(rt2x00dev, "invalid TX_STA_FIFO content");
+
+		/*
+		 * Obtain the status about this packet.
+		 */
+		txdesc.flags = 0;
+		rt2x00_desc_read(txwi, 0, &word);
+		mcs = rt2x00_get_field32(word, TXWI_W0_MCS);
+		mcs = rt2x00_get_field32(reg, TX_STA_FIFO_MCS);
+		real_mcs = rt2x00_get_field32(reg, TX_STA_FIFO_MCS);
+
+		/*
+		 * Ralink has a retry mechanism using a global fallback
+		 * table. We setup this fallback table to try the immediate
+		 * lower rate for all rates. In the TX_STA_FIFO, the MCS field
+		 * always contains the MCS used for the last transmission, be
+		 * it successful or not.
+		 */
+		if (rt2x00_get_field32(reg, TX_STA_FIFO_TX_SUCCESS)) {
+			/*
+			 * Transmission succeeded. The number of retries is
+			 * mcs - real_mcs
+			 */
+			__set_bit(TXDONE_SUCCESS, &txdesc.flags);
+			txdesc.retry = ((mcs > real_mcs) ? mcs - real_mcs : 0);
+		} else {
+			/*
+			 * Transmission failed. The number of retries is
+			 * always 7 in this case (for a total number of 8
+			 * frames sent).
+			 */
+			__set_bit(TXDONE_FAILURE, &txdesc.flags);
+			txdesc.retry = rt2x00dev->long_retry;
+		}
+
+		/*
+		 * the frame was retried at least once
+		 * -> hw used fallback rates
+		 */
+		if (txdesc.retry)
+			__set_bit(TXDONE_FALLBACK, &txdesc.flags);
+
+		rt2x00lib_txdone(entry, &txdesc);
+	}
+}
+EXPORT_SYMBOL_GPL(rt2800_txdone);
+
 void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
@@ -600,7 +720,7 @@ void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc)
 	/*
 	 * Add the TXWI for the beacon to the skb.
 	 */
-	rt2800_write_txwi((__le32 *)entry->skb->data, txdesc);
+	rt2800_write_tx_data(entry, txdesc);
 
 	/*
 	 * Dump beacon to userspace through debugfs.
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index 091641e3c5e..3b572c63382 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -1,4 +1,6 @@
 /*
+	Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
+	Copyright (C) 2010 Ivo van Doorn <IvDoorn@gmail.com>
 	Copyright (C) 2009 Bartlomiej Zolnierkiewicz
 
 	This program is free software; you can redistribute it and/or modify
@@ -44,6 +46,7 @@ struct rt2800_ops {
 	int (*drv_write_firmware)(struct rt2x00_dev *rt2x00dev,
 				  const u8 *data, const size_t len);
 	int (*drv_init_registers)(struct rt2x00_dev *rt2x00dev);
+	__le32 *(*drv_get_txwi)(struct queue_entry *entry);
 };
 
 static inline void rt2800_register_read(struct rt2x00_dev *rt2x00dev,
@@ -126,6 +129,13 @@ static inline int rt2800_drv_init_registers(struct rt2x00_dev *rt2x00dev)
 	return rt2800ops->drv_init_registers(rt2x00dev);
 }
 
+static inline __le32 *rt2800_drv_get_txwi(struct queue_entry *entry)
+{
+	const struct rt2800_ops *rt2800ops = entry->queue->rt2x00dev->ops->drv;
+
+	return rt2800ops->drv_get_txwi(entry);
+}
+
 void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
 			const u8 command, const u8 token,
 			const u8 arg0, const u8 arg1);
@@ -135,9 +145,12 @@ int rt2800_check_firmware(struct rt2x00_dev *rt2x00dev,
 int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
 			 const u8 *data, const size_t len);
 
-void rt2800_write_txwi(__le32 *txwi, struct txentry_desc *txdesc);
+void rt2800_write_tx_data(struct queue_entry *entry,
+			  struct txentry_desc *txdesc);
 void rt2800_process_rxwi(struct queue_entry *entry, struct rxdone_entry_desc *txdesc);
 
+void rt2800_txdone(struct rt2x00_dev *rt2x00dev);
+
 void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc);
 
 extern const struct rt2x00debug rt2800_rt2x00debug;
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 39b3846fa34..4390f2b74b2 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com>
+	Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
 	Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com>
 	Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
 	Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com>
@@ -566,15 +566,11 @@ static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev,
 /*
  * TX descriptor initialization
  */
-static void rt2800pci_write_tx_data(struct queue_entry* entry,
-				    struct txentry_desc *txdesc)
+static __le32 *rt2800pci_get_txwi(struct queue_entry *entry)
 {
-	__le32 *txwi = (__le32 *) entry->skb->data;
-
-	rt2800_write_txwi(txwi, txdesc);
+	return (__le32 *) entry->skb->data;
 }
 
-
 static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 				    struct sk_buff *skb,
 				    struct txentry_desc *txdesc)
@@ -728,110 +724,6 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry,
 /*
  * Interrupt functions.
  */
-static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
-{
-	struct data_queue *queue;
-	struct queue_entry *entry;
-	__le32 *txwi;
-	struct txdone_entry_desc txdesc;
-	u32 word;
-	u32 reg;
-	int wcid, ack, pid, tx_wcid, tx_ack, tx_pid;
-	u16 mcs, real_mcs;
-	int i;
-
-	/*
-	 * TX_STA_FIFO is a stack of X entries, hence read TX_STA_FIFO
-	 * at most X times and also stop processing once the TX_STA_FIFO_VALID
-	 * flag is not set anymore.
-	 *
-	 * The legacy drivers use X=TX_RING_SIZE but state in a comment
-	 * that the TX_STA_FIFO stack has a size of 16. We stick to our
-	 * tx ring size for now.
-	 */
-	for (i = 0; i < TX_ENTRIES; i++) {
-		rt2800_register_read(rt2x00dev, TX_STA_FIFO, &reg);
-		if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID))
-			break;
-
-		wcid    = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
-		ack     = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
-		pid     = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
-
-		/*
-		 * Skip this entry when it contains an invalid
-		 * queue identication number.
-		 */
-		if (pid <= 0 || pid > QID_RX)
-			continue;
-
-		queue = rt2x00queue_get_queue(rt2x00dev, pid - 1);
-		if (unlikely(!queue))
-			continue;
-
-		/*
-		 * Inside each queue, we process each entry in a chronological
-		 * order. We first check that the queue is not empty.
-		 */
-		if (rt2x00queue_empty(queue))
-			continue;
-		entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
-
-		/* Check if we got a match by looking at WCID/ACK/PID
-		 * fields */
-		txwi = (__le32 *) entry->skb->data;
-
-		rt2x00_desc_read(txwi, 1, &word);
-		tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID);
-		tx_ack  = rt2x00_get_field32(word, TXWI_W1_ACK);
-		tx_pid  = rt2x00_get_field32(word, TXWI_W1_PACKETID);
-
-		if ((wcid != tx_wcid) || (ack != tx_ack) || (pid != tx_pid))
-			WARNING(rt2x00dev, "invalid TX_STA_FIFO content\n");
-
-		/*
-		 * Obtain the status about this packet.
-		 */
-		txdesc.flags = 0;
-		rt2x00_desc_read(txwi, 0, &word);
-		mcs = rt2x00_get_field32(word, TXWI_W0_MCS);
-		real_mcs = rt2x00_get_field32(reg, TX_STA_FIFO_MCS);
-
-		/*
-		 * Ralink has a retry mechanism using a global fallback
-		 * table. We setup this fallback table to try the immediate
-		 * lower rate for all rates. In the TX_STA_FIFO, the MCS field
-		 * always contains the MCS used for the last transmission, be
-		 * it successful or not.
-		 */
-		if (rt2x00_get_field32(reg, TX_STA_FIFO_TX_SUCCESS)) {
-			/*
-			 * Transmission succeeded. The number of retries is
-			 * mcs - real_mcs
-			 */
-			__set_bit(TXDONE_SUCCESS, &txdesc.flags);
-			txdesc.retry = ((mcs > real_mcs) ? mcs - real_mcs : 0);
-		} else {
-			/*
-			 * Transmission failed. The number of retries is
-			 * always 7 in this case (for a total number of 8
-			 * frames sent).
-			 */
-			__set_bit(TXDONE_FAILURE, &txdesc.flags);
-			txdesc.retry = 7;
-		}
-
-		/*
-		 * the frame was retried at least once
-		 * -> hw used fallback rates
-		 */
-		if (txdesc.retry)
-			__set_bit(TXDONE_FALLBACK, &txdesc.flags);
-
-		rt2x00lib_txdone(entry, &txdesc);
-	}
-}
-
 static void rt2800pci_wakeup(struct rt2x00_dev *rt2x00dev)
 {
 	struct ieee80211_conf conf = { .flags = 0 };
@@ -867,7 +759,7 @@ static irqreturn_t rt2800pci_interrupt_thread(int irq, void *dev_instance)
 	 * 4 - Tx done interrupt.
 	 */
 	if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS))
-		rt2800pci_txdone(rt2x00dev);
+		rt2800_txdone(rt2x00dev);
 
 	/*
 	 * 5 - Auto wakeup interrupt.
@@ -1011,6 +903,7 @@ static const struct rt2800_ops rt2800pci_rt2800_ops = {
 	.regbusy_read		= rt2x00pci_regbusy_read,
 	.drv_write_firmware	= rt2800pci_write_firmware,
 	.drv_init_registers	= rt2800pci_init_registers,
+	.drv_get_txwi		= rt2800pci_get_txwi,
 };
 
 static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
@@ -1030,7 +923,7 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
 	.reset_tuner		= rt2800_reset_tuner,
 	.link_tuner		= rt2800_link_tuner,
 	.write_tx_desc		= rt2800pci_write_tx_desc,
-	.write_tx_data		= rt2800pci_write_tx_data,
+	.write_tx_data		= rt2800_write_tx_data,
 	.write_beacon		= rt2800_write_beacon,
 	.kick_tx_queue		= rt2800pci_kick_tx_queue,
 	.kill_tx_queue		= rt2800pci_kill_tx_queue,
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 5a2dfe87c6b..9ad28be294e 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -1,5 +1,6 @@
 /*
-	Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com>
+	Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
+	Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
 	Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
 	Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
 	Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
@@ -320,15 +321,14 @@ static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev,
 /*
  * TX descriptor initialization
  */
-static void rt2800usb_write_tx_data(struct queue_entry* entry,
-				    struct txentry_desc *txdesc)
+static __le32 *rt2800usb_get_txwi(struct queue_entry *entry)
 {
-	__le32 *txwi = (__le32 *) (entry->skb->data + TXINFO_DESC_SIZE);
-
-	rt2800_write_txwi(txwi, txdesc);
+	if (entry->queue->qid == QID_BEACON)
+		return (__le32 *) (entry->skb->data);
+	else
+		return (__le32 *) (entry->skb->data + TXINFO_DESC_SIZE);
 }
 
-
 static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 				    struct sk_buff *skb,
 				    struct txentry_desc *txdesc)
@@ -379,6 +379,38 @@ static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
 }
 
 /*
+ * TX control handlers
+ */
+static void rt2800usb_work_txdone(struct work_struct *work)
+{
+	struct rt2x00_dev *rt2x00dev =
+	    container_of(work, struct rt2x00_dev, txdone_work);
+	struct data_queue *queue;
+	struct queue_entry *entry;
+
+	rt2800_txdone(rt2x00dev);
+
+	/*
+	 * Process any trailing TX status reports for IO failures,
+	 * we loop until we find the first non-IO error entry. This
+	 * can either be a frame which is free, is being uploaded,
+	 * or has completed the upload but didn't have an entry
+	 * in the TX_STAT_FIFO register yet.
+	 */
+	tx_queue_for_each(rt2x00dev, queue) {
+		while (!rt2x00queue_empty(queue)) {
+			entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
+
+			if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
+			    !test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
+				break;
+
+			rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
+		}
+	}
+}
+
+/*
  * RX control handlers
  */
 static void rt2800usb_fill_rxdone(struct queue_entry *entry,
@@ -514,6 +546,11 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 	 */
 	rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
 
+	/*
+	 * Overwrite TX done handler
+	 */
+	PREPARE_WORK(&rt2x00dev->txdone_work, rt2800usb_work_txdone);
+
 	return 0;
 }
 
@@ -549,6 +586,7 @@ static const struct rt2800_ops rt2800usb_rt2800_ops = {
 	.regbusy_read		= rt2x00usb_regbusy_read,
 	.drv_write_firmware	= rt2800usb_write_firmware,
 	.drv_init_registers	= rt2800usb_init_registers,
+	.drv_get_txwi		= rt2800usb_get_txwi,
 };
 
 static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
@@ -566,7 +604,7 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
 	.link_tuner		= rt2800_link_tuner,
 	.watchdog		= rt2x00usb_watchdog,
 	.write_tx_desc		= rt2800usb_write_tx_desc,
-	.write_tx_data		= rt2800usb_write_tx_data,
+	.write_tx_data		= rt2800_write_tx_data,
 	.write_beacon		= rt2800_write_beacon,
 	.get_tx_data_len	= rt2800usb_get_tx_data_len,
 	.kick_tx_queue		= rt2x00usb_kick_tx_queue,
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index c21af38cc5a..8c65244a847 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -1,5 +1,6 @@
 /*
-	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+	Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
+	Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
 	Copyright (C) 2004 - 2009 Gertjan van Wingerde <gwingerde@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
@@ -698,6 +699,7 @@ struct rt2x00_dev {
 	struct ieee80211_hw *hw;
 	struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
 	enum ieee80211_band curr_band;
+	int curr_freq;
 
 	/*
 	 * If enabled, the debugfs interface structures
@@ -850,11 +852,6 @@ struct rt2x00_dev {
 	struct ieee80211_low_level_stats low_level_stats;
 
 	/*
-	 * RX configuration information.
-	 */
-	struct ieee80211_rx_status rx_status;
-
-	/*
 	 * Scheduled work.
 	 * NOTE: intf_work will use ieee80211_iterate_active_interfaces()
 	 * which means it cannot be placed on the hw->workqueue
@@ -862,6 +859,12 @@ struct rt2x00_dev {
 	 */
 	struct work_struct intf_work;
 
+	/**
+	 * Scheduled work for TX/RX done handling (USB devices)
+	 */
+	struct work_struct rxdone_work;
+	struct work_struct txdone_work;
+
 	/*
 	 * Data queue arrays for RX, TX and Beacon.
 	 * The Beacon array also contains the Atim queue
@@ -1071,6 +1074,7 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev);
 void rt2x00lib_pretbtt(struct rt2x00_dev *rt2x00dev);
 void rt2x00lib_txdone(struct queue_entry *entry,
 		      struct txdone_entry_desc *txdesc);
+void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status);
 void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 		      struct queue_entry *entry);
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 953dc4f2c6a..34f34fa7f53 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -126,11 +126,6 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
 	 * ANTENNA_SW_DIVERSITY state to the driver.
 	 * If that happens, fallback to hardware defaults,
 	 * or our own default.
-	 * If diversity handling is active for a particular antenna,
-	 * we shouldn't overwrite that antenna.
-	 * The calls to rt2x00lib_config_antenna_check()
-	 * might have caused that we restore back to the already
-	 * active setting. If that has happened we can quit.
 	 */
 	if (!(ant->flags & ANTENNA_RX_DIVERSITY))
 		config.rx = rt2x00lib_config_antenna_check(config.rx, def->rx);
@@ -142,9 +137,6 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
 	else
 		config.tx = active->tx;
 
-	if (config.rx == active->rx && config.tx == active->tx)
-		return;
-
 	/*
 	 * Antenna setup changes require the RX to be disabled,
 	 * else the changes will be ignored by the device.
@@ -209,10 +201,8 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
 		rt2x00link_reset_tuner(rt2x00dev, false);
 
 	rt2x00dev->curr_band = conf->channel->band;
+	rt2x00dev->curr_freq = conf->channel->center_freq;
 	rt2x00dev->tx_power = conf->power_level;
 	rt2x00dev->short_retry = conf->short_frame_max_tx_count;
 	rt2x00dev->long_retry = conf->long_frame_max_tx_count;
-
-	rt2x00dev->rx_status.band = conf->channel->band;
-	rt2x00dev->rx_status.freq = conf->channel->center_freq;
 }
diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c
index 583dacd8d24..5e9074bf2b8 100644
--- a/drivers/net/wireless/rt2x00/rt2x00crypto.c
+++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c
@@ -31,15 +31,14 @@
 
 enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key)
 {
-	switch (key->alg) {
-	case ALG_WEP:
-		if (key->keylen == WLAN_KEY_LEN_WEP40)
-			return CIPHER_WEP64;
-		else
-			return CIPHER_WEP128;
-	case ALG_TKIP:
+	switch (key->cipher) {
+	case WLAN_CIPHER_SUITE_WEP40:
+		return CIPHER_WEP64;
+	case WLAN_CIPHER_SUITE_WEP104:
+		return CIPHER_WEP128;
+	case WLAN_CIPHER_SUITE_TKIP:
 		return CIPHER_TKIP;
-	case ALG_CCMP:
+	case WLAN_CIPHER_SUITE_CCMP:
 		return CIPHER_AES;
 	default:
 		return CIPHER_NONE;
@@ -95,7 +94,7 @@ unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev,
 		overhead += key->iv_len;
 
 	if (!(key->flags & IEEE80211_KEY_FLAG_GENERATE_MMIC)) {
-		if (key->alg == ALG_TKIP)
+		if (key->cipher == WLAN_CIPHER_SUITE_TKIP)
 			overhead += 8;
 	}
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 585e8166f22..e692608bee8 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -1,5 +1,6 @@
 /*
-	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+	Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
+	Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
@@ -383,15 +384,7 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	 * send the status report back.
 	 */
 	if (!(skbdesc_flags & SKBDESC_NOT_MAC80211))
-		/*
-		 * Only PCI and SOC devices process the tx status in process
-		 * context. Hence use ieee80211_tx_status for PCI and SOC
-		 * devices and stick to ieee80211_tx_status_irqsafe for USB.
-		 */
-		if (rt2x00_is_usb(rt2x00dev))
-			ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb);
-		else
-			ieee80211_tx_status(rt2x00dev->hw, entry->skb);
+		ieee80211_tx_status(rt2x00dev->hw, entry->skb);
 	else
 		dev_kfree_skb_any(entry->skb);
 
@@ -403,7 +396,6 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 
 	rt2x00dev->ops->lib->clear_entry(entry);
 
-	clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
 	rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE);
 
 	/*
@@ -416,6 +408,18 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 }
 EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
 
+void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status)
+{
+	struct txdone_entry_desc txdesc;
+
+	txdesc.flags = 0;
+	__set_bit(status, &txdesc.flags);
+	txdesc.retry = 0;
+
+	rt2x00lib_txdone(entry, &txdesc);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_txdone_noinfo);
+
 static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev,
 					struct rxdone_entry_desc *rxdesc)
 {
@@ -460,9 +464,13 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 {
 	struct rxdone_entry_desc rxdesc;
 	struct sk_buff *skb;
-	struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status;
+	struct ieee80211_rx_status *rx_status;
 	unsigned int header_length;
 	int rate_idx;
+
+	if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
+		goto submit_entry;
+
 	/*
 	 * Allocate a new sk_buffer. If no new buffer available, drop the
 	 * received frame and reuse the existing buffer.
@@ -527,39 +535,32 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
 	 */
 	rt2x00link_update_stats(rt2x00dev, entry->skb, &rxdesc);
 	rt2x00debug_update_crypto(rt2x00dev, &rxdesc);
+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb);
 
+	/*
+	 * Initialize RX status information, and send frame
+	 * to mac80211.
+	 */
+	rx_status = IEEE80211_SKB_RXCB(entry->skb);
 	rx_status->mactime = rxdesc.timestamp;
+	rx_status->band = rt2x00dev->curr_band;
+	rx_status->freq = rt2x00dev->curr_freq;
 	rx_status->rate_idx = rate_idx;
 	rx_status->signal = rxdesc.rssi;
 	rx_status->flag = rxdesc.flags;
 	rx_status->antenna = rt2x00dev->link.ant.active.rx;
 
-	/*
-	 * Send frame to mac80211 & debugfs.
-	 * mac80211 will clean up the skb structure.
-	 */
-	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb);
-	memcpy(IEEE80211_SKB_RXCB(entry->skb), rx_status, sizeof(*rx_status));
-
-	/*
-	 * Currently only PCI and SOC devices handle rx interrupts in process
-	 * context. Hence, use ieee80211_rx_irqsafe for USB and ieee80211_rx_ni
-	 * for PCI and SOC devices.
-	 */
-	if (rt2x00_is_usb(rt2x00dev))
-		ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb);
-	else
-		ieee80211_rx_ni(rt2x00dev->hw, entry->skb);
+	ieee80211_rx_ni(rt2x00dev->hw, entry->skb);
 
 	/*
 	 * Replace the skb with the freshly allocated one.
 	 */
 	entry->skb = skb;
-	entry->flags = 0;
 
+submit_entry:
 	rt2x00dev->ops->lib->clear_entry(entry);
-
 	rt2x00queue_index_inc(entry->queue, Q_INDEX);
+	rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE);
 }
 EXPORT_SYMBOL_GPL(rt2x00lib_rxdone);
 
@@ -1017,6 +1018,8 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
 	 * Stop all work.
 	 */
 	cancel_work_sync(&rt2x00dev->intf_work);
+	cancel_work_sync(&rt2x00dev->rxdone_work);
+	cancel_work_sync(&rt2x00dev->txdone_work);
 
 	/*
 	 * Uninitialize device.
diff --git a/drivers/net/wireless/rt2x00/rt2x00firmware.c b/drivers/net/wireless/rt2x00/rt2x00firmware.c
index b818a43c467..f0e1eb72bef 100644
--- a/drivers/net/wireless/rt2x00/rt2x00firmware.c
+++ b/drivers/net/wireless/rt2x00/rt2x00firmware.c
@@ -63,6 +63,9 @@ static int rt2x00lib_request_firmware(struct rt2x00_dev *rt2x00dev)
 
 	INFO(rt2x00dev, "Firmware detected - version: %d.%d.\n",
 	     fw->data[fw->size - 4], fw->data[fw->size - 3]);
+	snprintf(rt2x00dev->hw->wiphy->fw_version,
+			sizeof(rt2x00dev->hw->wiphy->fw_version), "%d.%d",
+			fw->data[fw->size - 4], fw->data[fw->size - 3]);
 
 	retval = rt2x00dev->ops->lib->check_firmware(rt2x00dev, fw->data, fw->size);
 	switch (retval) {
diff --git a/drivers/net/wireless/rt2x00/rt2x00ht.c b/drivers/net/wireless/rt2x00/rt2x00ht.c
index c004cd3a884..ad3c7ff4837 100644
--- a/drivers/net/wireless/rt2x00/rt2x00ht.c
+++ b/drivers/net/wireless/rt2x00/rt2x00ht.c
@@ -54,6 +54,16 @@ void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
 	 */
 	if (txrate->flags & IEEE80211_TX_RC_MCS) {
 		txdesc->mcs = txrate->idx;
+
+		/*
+		 * MIMO PS should be set to 1 for STA's using dynamic SM PS
+		 * when using more then one tx stream (>MCS7).
+		 */
+		if (tx_info->control.sta && txdesc->mcs > 7 &&
+		    (tx_info->control.sta->ht_cap.cap &
+		     (WLAN_HT_CAP_SM_PS_DYNAMIC <<
+		      IEEE80211_HT_CAP_SM_PS_SHIFT)))
+			__set_bit(ENTRY_TXD_HT_MIMO_PS, &txdesc->flags);
 	} else {
 		txdesc->mcs = rt2x00_get_rate_mcs(hwrate->mcs);
 		if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 9c609be9508..480d33a3ce4 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -1,5 +1,6 @@
 /*
-	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+	Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
+	Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
 	Copyright (C) 2004 - 2009 Gertjan van Wingerde <gwingerde@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
@@ -730,9 +731,9 @@ void rt2x00queue_init_queues(struct rt2x00_dev *rt2x00dev)
 		rt2x00queue_reset(queue);
 
 		for (i = 0; i < queue->limit; i++) {
-			queue->entries[i].flags = 0;
-
 			rt2x00dev->ops->lib->clear_entry(&queue->entries[i]);
+			if (queue->qid == QID_RX)
+				rt2x00queue_index_inc(queue, Q_INDEX);
 		}
 	}
 }
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 191e7775a9c..2d3bf843735 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+	Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
@@ -268,6 +268,7 @@ struct txdone_entry_desc {
  * @ENTRY_TXD_HT_AMPDU: This frame is part of an AMPDU.
  * @ENTRY_TXD_HT_BW_40: Use 40MHz Bandwidth.
  * @ENTRY_TXD_HT_SHORT_GI: Use short GI.
+ * @ENTRY_TXD_HT_MIMO_PS: The receiving STA is in dynamic SM PS mode.
  */
 enum txentry_desc_flags {
 	ENTRY_TXD_RTS_FRAME,
@@ -286,6 +287,7 @@ enum txentry_desc_flags {
 	ENTRY_TXD_HT_AMPDU,
 	ENTRY_TXD_HT_BW_40,
 	ENTRY_TXD_HT_SHORT_GI,
+	ENTRY_TXD_HT_MIMO_PS,
 };
 
 /**
@@ -363,12 +365,16 @@ struct txentry_desc {
  *	the device has signaled it is done with it.
  * @ENTRY_DATA_PENDING: This entry contains a valid frame and is waiting
  *	for the signal to start sending.
+ * @ENTRY_DATA_IO_FAILED: Hardware indicated that an IO error occured
+ *	while transfering the data to the hardware. No TX status report will
+ *	be expected from the hardware.
  */
 enum queue_entry_flags {
 	ENTRY_BCN_ASSIGNED,
 	ENTRY_OWNER_DEVICE_DATA,
 	ENTRY_OWNER_DEVICE_CRYPTO,
 	ENTRY_DATA_PENDING,
+	ENTRY_DATA_IO_FAILED
 };
 
 /**
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index ff3a36622d1..f76014f732c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -1,5 +1,6 @@
 /*
-	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+	Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
+	Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
@@ -167,33 +168,61 @@ EXPORT_SYMBOL_GPL(rt2x00usb_regbusy_read);
 /*
  * TX data handlers.
  */
+static void rt2x00usb_work_txdone_entry(struct queue_entry *entry)
+{
+	/*
+	 * If the transfer to hardware succeeded, it does not mean the
+	 * frame was send out correctly. It only means the frame
+	 * was succesfully pushed to the hardware, we have no
+	 * way to determine the transmission status right now.
+	 * (Only indirectly by looking at the failed TX counters
+	 * in the register).
+	 */
+	if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
+		rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
+	else
+		rt2x00lib_txdone_noinfo(entry, TXDONE_UNKNOWN);
+}
+
+static void rt2x00usb_work_txdone(struct work_struct *work)
+{
+	struct rt2x00_dev *rt2x00dev =
+	    container_of(work, struct rt2x00_dev, txdone_work);
+	struct data_queue *queue;
+	struct queue_entry *entry;
+
+	tx_queue_for_each(rt2x00dev, queue) {
+		while (!rt2x00queue_empty(queue)) {
+			entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
+
+			if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
+				break;
+
+			rt2x00usb_work_txdone_entry(entry);
+		}
+	}
+}
+
 static void rt2x00usb_interrupt_txdone(struct urb *urb)
 {
 	struct queue_entry *entry = (struct queue_entry *)urb->context;
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-	struct txdone_entry_desc txdesc;
 
 	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) ||
-	    !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
+	    !__test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
 		return;
 
 	/*
-	 * Obtain the status about this packet.
-	 * Note that when the status is 0 it does not mean the
-	 * frame was send out correctly. It only means the frame
-	 * was succesfully pushed to the hardware, we have no
-	 * way to determine the transmission status right now.
-	 * (Only indirectly by looking at the failed TX counters
-	 * in the register).
+	 * Check if the frame was correctly uploaded
 	 */
-	txdesc.flags = 0;
-	if (!urb->status)
-		__set_bit(TXDONE_UNKNOWN, &txdesc.flags);
-	else
-		__set_bit(TXDONE_FAILURE, &txdesc.flags);
-	txdesc.retry = 0;
+	if (urb->status)
+		__set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
 
-	rt2x00lib_txdone(entry, &txdesc);
+	/*
+	 * Schedule the delayed work for reading the TX status
+	 * from the device.
+	 */
+	ieee80211_queue_work(rt2x00dev->hw, &rt2x00dev->txdone_work);
 }
 
 static inline void rt2x00usb_kick_tx_entry(struct queue_entry *entry)
@@ -294,6 +323,7 @@ EXPORT_SYMBOL_GPL(rt2x00usb_kill_tx_queue);
 
 static void rt2x00usb_watchdog_reset_tx(struct data_queue *queue)
 {
+	struct queue_entry *entry;
 	struct queue_entry_priv_usb *entry_priv;
 	unsigned short threshold = queue->threshold;
 
@@ -313,14 +343,22 @@ static void rt2x00usb_watchdog_reset_tx(struct data_queue *queue)
 	 * Reset all currently uploaded TX frames.
 	 */
 	while (!rt2x00queue_empty(queue)) {
-		entry_priv = rt2x00queue_get_entry(queue, Q_INDEX_DONE)->priv_data;
+		entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
+		entry_priv = entry->priv_data;
 		usb_kill_urb(entry_priv->urb);
 
 		/*
 		 * We need a short delay here to wait for
-		 * the URB to be canceled and invoked the tx_done handler.
+		 * the URB to be canceled
+		 */
+		do {
+			udelay(100);
+		} while (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags));
+
+		/*
+		 * Invoke the TX done handler
 		 */
-		udelay(200);
+		rt2x00usb_work_txdone_entry(entry);
 	}
 
 	/*
@@ -345,15 +383,41 @@ EXPORT_SYMBOL_GPL(rt2x00usb_watchdog);
 /*
  * RX data handlers.
  */
+static void rt2x00usb_work_rxdone(struct work_struct *work)
+{
+	struct rt2x00_dev *rt2x00dev =
+	    container_of(work, struct rt2x00_dev, rxdone_work);
+	struct queue_entry *entry;
+	struct skb_frame_desc *skbdesc;
+	u8 rxd[32];
+
+	while (!rt2x00queue_empty(rt2x00dev->rx)) {
+		entry = rt2x00queue_get_entry(rt2x00dev->rx, Q_INDEX_DONE);
+
+		if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
+			break;
+
+		/*
+		 * Fill in desc fields of the skb descriptor
+		 */
+		skbdesc = get_skb_frame_desc(entry->skb);
+		skbdesc->desc = rxd;
+		skbdesc->desc_len = entry->queue->desc_size;
+
+		/*
+		 * Send the frame to rt2x00lib for further processing.
+		 */
+		rt2x00lib_rxdone(rt2x00dev, entry);
+	}
+}
+
 static void rt2x00usb_interrupt_rxdone(struct urb *urb)
 {
 	struct queue_entry *entry = (struct queue_entry *)urb->context;
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
-	u8 rxd[32];
 
 	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags) ||
-	    !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
+	    !__test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
 		return;
 
 	/*
@@ -361,22 +425,14 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb)
 	 * to be actually valid, or if the urb is signaling
 	 * a problem.
 	 */
-	if (urb->actual_length < entry->queue->desc_size || urb->status) {
-		set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
-		usb_submit_urb(urb, GFP_ATOMIC);
-		return;
-	}
-
-	/*
-	 * Fill in desc fields of the skb descriptor
-	 */
-	skbdesc->desc = rxd;
-	skbdesc->desc_len = entry->queue->desc_size;
+	if (urb->actual_length < entry->queue->desc_size || urb->status)
+		__set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
 
 	/*
-	 * Send the frame to rt2x00lib for further processing.
+	 * Schedule the delayed work for reading the RX status
+	 * from the device.
 	 */
-	rt2x00lib_rxdone(rt2x00dev, entry);
+	ieee80211_queue_work(rt2x00dev->hw, &rt2x00dev->rxdone_work);
 }
 
 /*
@@ -405,6 +461,8 @@ void rt2x00usb_clear_entry(struct queue_entry *entry)
 	struct queue_entry_priv_usb *entry_priv = entry->priv_data;
 	int pipe;
 
+	entry->flags = 0;
+
 	if (entry->queue->qid == QID_RX) {
 		pipe = usb_rcvbulkpipe(usb_dev, entry->queue->usb_endpoint);
 		usb_fill_bulk_urb(entry_priv->urb, usb_dev, pipe,
@@ -413,8 +471,6 @@ void rt2x00usb_clear_entry(struct queue_entry *entry)
 
 		set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
 		usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
-	} else {
-		entry->flags = 0;
 	}
 }
 EXPORT_SYMBOL_GPL(rt2x00usb_clear_entry);
@@ -659,6 +715,9 @@ int rt2x00usb_probe(struct usb_interface *usb_intf,
 
 	rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_USB);
 
+	INIT_WORK(&rt2x00dev->rxdone_work, rt2x00usb_work_rxdone);
+	INIT_WORK(&rt2x00dev->txdone_work, rt2x00usb_work_txdone);
+
 	retval = rt2x00usb_alloc_reg(rt2x00dev);
 	if (retval)
 		goto exit_free_device;
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index f226582dbc8..3f8d10b76fe 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1050,7 +1050,7 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Determine r17 bounds.
 	 */
-	if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
+	if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
 		low_bound = 0x28;
 		up_bound = 0x48;
 		if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
@@ -1972,7 +1972,7 @@ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
 		return 0;
 	}
 
-	if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
+	if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
 		if (lna == 3 || lna == 2)
 			offset += 10;
 	}
@@ -2107,11 +2107,7 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
 				"TX status report missed for entry %d\n",
 				entry_done->entry_idx);
 
-			txdesc.flags = 0;
-			__set_bit(TXDONE_UNKNOWN, &txdesc.flags);
-			txdesc.retry = 0;
-
-			rt2x00lib_txdone(entry_done, &txdesc);
+			rt2x00lib_txdone_noinfo(entry, TXDONE_UNKNOWN);
 			entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
 		}
 
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 99985a21865..8ca19f70aea 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -929,7 +929,7 @@ static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Determine r17 bounds.
 	 */
-	if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
+	if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
 		low_bound = 0x28;
 		up_bound = 0x48;
 
@@ -1597,7 +1597,7 @@ static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
 		return 0;
 	}
 
-	if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
+	if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
 		if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
 			if (lna == 3 || lna == 2)
 				offset += 10;