Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem

Conflicts:
	drivers/net/wireless/libertas/if_cs.c
	drivers/net/wireless/rtlwifi/pci.c
	net/bluetooth/l2cap_sock.c

10 files changed, 175 insertions, 28 deletions

diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index b21f81231a0..15237c27548 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1797,6 +1797,7 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 		__set_bit(REQUIRE_COPY_IV, &rt2x00dev->cap_flags);
 	}
 	__set_bit(REQUIRE_SW_SEQNO, &rt2x00dev->cap_flags);
+	__set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
 
 	/*
 	 * Set the rssi offset.
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 5cd096e2ae3..790afd3ed94 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1640,7 +1640,6 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
 					 struct channel_info *info)
 {
 	u8 rfcsr;
-	u16 eeprom;
 
 	rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1);
 	rt2800_rfcsr_write(rt2x00dev, 9, rf->rf3);
@@ -1670,11 +1669,10 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
 		rt2x00_set_field8(&rfcsr, RFCSR17_CODE, rt2x00dev->freq_offset);
 	rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
 
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
 	if (rf->channel <= 14) {
 		int idx = rf->channel-1;
 
-		if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_BT_COEXIST)) {
+		if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) {
 			if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) {
 				/* r55/r59 value array of channel 1~14 */
 				static const char r55_bt_rev[] = {0x83, 0x83,
@@ -2917,8 +2915,7 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
 		ant = (div_mode == 3) ? 1 : 0;
 
 		/* check if this is a Bluetooth combo card */
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
-		if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_BT_COEXIST)) {
+		if (test_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags)) {
 			u32 reg;
 
 			rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
@@ -3727,16 +3724,8 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	}
 
 	/*
-	 * Read frequency offset and RF programming sequence.
-	 */
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
-	rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
-
-	/*
-	 * Read external LNA informations.
+	 * Determine external LNA informations.
 	 */
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
-
 	if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_LNA_5G))
 		__set_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags);
 	if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_LNA_2G))
@@ -3749,6 +3738,18 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 		__set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags);
 
 	/*
+	 * Detect if this device has Bluetooth co-existence.
+	 */
+	if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_BT_COEXIST))
+		__set_bit(CAPABILITY_BT_COEXIST, &rt2x00dev->cap_flags);
+
+	/*
+	 * Read frequency offset and RF programming sequence.
+	 */
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
+	rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
+
+	/*
 	 * Store led settings, for correct led behaviour.
 	 */
 #ifdef CONFIG_RT2X00_LIB_LEDS
@@ -3756,7 +3757,7 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
 	rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
 
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &rt2x00dev->led_mcu_reg);
+	rt2x00dev->led_mcu_reg = eeprom;
 #endif /* CONFIG_RT2X00_LIB_LEDS */
 
 	/*
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 08d3947fcb2..cc4a54f571b 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -302,8 +302,8 @@ static int rt2800pci_write_firmware(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Write firmware to device.
 	 */
-	rt2800_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
-				   data, len);
+	rt2x00pci_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
+				      data, len);
 
 	rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000);
 	rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001);
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 0d4e8fa3e1f..0eb44cf2f44 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -114,12 +114,12 @@ static bool rt2800usb_txstatus_pending(struct rt2x00_dev *rt2x00dev)
 	return false;
 }
 
-static void rt2800usb_tx_sta_fifo_read_completed(struct rt2x00_dev *rt2x00dev,
+static bool rt2800usb_tx_sta_fifo_read_completed(struct rt2x00_dev *rt2x00dev,
 						 int urb_status, u32 tx_status)
 {
 	if (urb_status) {
 		WARNING(rt2x00dev, "rt2x00usb_register_read_async failed: %d\n", urb_status);
-		return;
+		return false;
 	}
 
 	/* try to read all TX_STA_FIFO entries before scheduling txdone_work */
@@ -129,13 +129,14 @@ static void rt2800usb_tx_sta_fifo_read_completed(struct rt2x00_dev *rt2x00dev,
 				"drop tx status report.\n");
 			queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
 		} else
-			rt2x00usb_register_read_async(rt2x00dev, TX_STA_FIFO,
-						      rt2800usb_tx_sta_fifo_read_completed);
+			return true;
 	} else if (!kfifo_is_empty(&rt2x00dev->txstatus_fifo)) {
 		queue_work(rt2x00dev->workqueue, &rt2x00dev->txdone_work);
 	} else if (rt2800usb_txstatus_pending(rt2x00dev)) {
-		mod_timer(&rt2x00dev->txstatus_timer, jiffies + msecs_to_jiffies(20));
+		mod_timer(&rt2x00dev->txstatus_timer, jiffies + msecs_to_jiffies(2));
 	}
+
+	return false;
 }
 
 static void rt2800usb_tx_dma_done(struct queue_entry *entry)
@@ -493,7 +494,7 @@ static void rt2800usb_work_txdone(struct work_struct *work)
 	 * also delayed -> use a timer to retrieve it.
 	 */
 	if (rt2800usb_txstatus_pending(rt2x00dev))
-		mod_timer(&rt2x00dev->txstatus_timer, jiffies + msecs_to_jiffies(20));
+		mod_timer(&rt2x00dev->txstatus_timer, jiffies + msecs_to_jiffies(2));
 }
 
 /*
@@ -633,6 +634,7 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 	__set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
 	__set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags);
 	__set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
+	__set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
 
 	setup_timer(&rt2x00dev->txstatus_timer,
 		    rt2800usb_tx_sta_fifo_timeout,
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 9d1a158e2c3..c446db69bd3 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -662,6 +662,7 @@ enum rt2x00_state_flags {
 	 * Driver configuration
 	 */
 	CONFIG_CHANNEL_HT40,
+	CONFIG_POWERSAVING,
 };
 
 /*
@@ -681,6 +682,7 @@ enum rt2x00_capability_flags {
 	REQUIRE_TASKLET_CONTEXT,
 	REQUIRE_SW_SEQNO,
 	REQUIRE_HT_TX_DESC,
+	REQUIRE_PS_AUTOWAKE,
 
 	/*
 	 * Capabilities
@@ -697,6 +699,7 @@ enum rt2x00_capability_flags {
 	CAPABILITY_EXTERNAL_LNA_A,
 	CAPABILITY_EXTERNAL_LNA_BG,
 	CAPABILITY_DOUBLE_ANTENNA,
+	CAPABILITY_BT_COEXIST,
 };
 
 /*
@@ -874,10 +877,20 @@ struct rt2x00_dev {
 	u8 calibration[2];
 
 	/*
+	 * Association id.
+	 */
+	u16 aid;
+
+	/*
 	 * Beacon interval.
 	 */
 	u16 beacon_int;
 
+	/**
+	 * Timestamp of last received beacon
+	 */
+	unsigned long last_beacon;
+
 	/*
 	 * Low level statistics which will have
 	 * to be kept up to date while device is running.
@@ -906,6 +919,11 @@ struct rt2x00_dev {
 	struct work_struct txdone_work;
 
 	/*
+	 * Powersaving work
+	 */
+	struct delayed_work autowakeup_work;
+
+	/*
 	 * Data queue arrays for RX, TX, Beacon and ATIM.
 	 */
 	unsigned int data_queues;
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index f7872640459..555180d8f4a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -100,6 +100,10 @@ void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev,
 	erp.basic_rates = bss_conf->basic_rates;
 	erp.beacon_int = bss_conf->beacon_int;
 
+	/* Update the AID, this is needed for dynamic PS support */
+	rt2x00dev->aid = bss_conf->assoc ? bss_conf->aid : 0;
+	rt2x00dev->last_beacon = bss_conf->timestamp;
+
 	/* Update global beacon interval time, this is needed for PS support */
 	rt2x00dev->beacon_int = bss_conf->beacon_int;
 
@@ -204,6 +208,9 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
 {
 	struct rt2x00lib_conf libconf;
 	u16 hw_value;
+	u16 autowake_timeout;
+	u16 beacon_int;
+	u16 beacon_diff;
 
 	memset(&libconf, 0, sizeof(libconf));
 
@@ -227,6 +234,10 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
 		       sizeof(libconf.channel));
 	}
 
+	if (test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) &&
+	    (ieee80211_flags & IEEE80211_CONF_CHANGE_PS))
+		cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
+
 	/*
 	 * Start configuration.
 	 */
@@ -239,6 +250,26 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
 	if (ieee80211_flags & IEEE80211_CONF_CHANGE_CHANNEL)
 		rt2x00link_reset_tuner(rt2x00dev, false);
 
+	if (test_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags) &&
+	    (ieee80211_flags & IEEE80211_CONF_CHANGE_PS) &&
+	    (conf->flags & IEEE80211_CONF_PS)) {
+		beacon_diff = (long)jiffies - (long)rt2x00dev->last_beacon;
+		beacon_int = msecs_to_jiffies(rt2x00dev->beacon_int);
+
+		if (beacon_diff > beacon_int)
+			beacon_diff = 0;
+
+		autowake_timeout = (conf->max_sleep_period * beacon_int) - beacon_diff;
+		queue_delayed_work(rt2x00dev->workqueue,
+				   &rt2x00dev->autowakeup_work,
+				   autowake_timeout - 15);
+	}
+
+	if (conf->flags & IEEE80211_CONF_PS)
+		set_bit(CONFIG_POWERSAVING, &rt2x00dev->flags);
+	else
+		clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags);
+
 	rt2x00dev->curr_band = conf->channel->band;
 	rt2x00dev->curr_freq = conf->channel->center_freq;
 	rt2x00dev->tx_power = conf->power_level;
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 7776d9f1f29..2eb5196977f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -141,6 +141,16 @@ static void rt2x00lib_intf_scheduled(struct work_struct *work)
 					    rt2x00dev);
 }
 
+static void rt2x00lib_autowakeup(struct work_struct *work)
+{
+	struct rt2x00_dev *rt2x00dev =
+	    container_of(work, struct rt2x00_dev, autowakeup_work.work);
+
+	if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
+		ERROR(rt2x00dev, "Device failed to wakeup.\n");
+	clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags);
+}
+
 /*
  * Interrupt context handlers.
  */
@@ -416,6 +426,77 @@ void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status)
 }
 EXPORT_SYMBOL_GPL(rt2x00lib_txdone_noinfo);
 
+static u8 *rt2x00lib_find_ie(u8 *data, unsigned int len, u8 ie)
+{
+	struct ieee80211_mgmt *mgmt = (void *)data;
+	u8 *pos, *end;
+
+	pos = (u8 *)mgmt->u.beacon.variable;
+	end = data + len;
+	while (pos < end) {
+		if (pos + 2 + pos[1] > end)
+			return NULL;
+
+		if (pos[0] == ie)
+			return pos;
+
+		pos += 2 + pos[1];
+	}
+
+	return NULL;
+}
+
+static void rt2x00lib_rxdone_check_ps(struct rt2x00_dev *rt2x00dev,
+				      struct sk_buff *skb,
+				      struct rxdone_entry_desc *rxdesc)
+{
+	struct ieee80211_hdr *hdr = (void *) skb->data;
+	struct ieee80211_tim_ie *tim_ie;
+	u8 *tim;
+	u8 tim_len;
+	bool cam;
+
+	/* If this is not a beacon, or if mac80211 has no powersaving
+	 * configured, or if the device is already in powersaving mode
+	 * we can exit now. */
+	if (likely(!ieee80211_is_beacon(hdr->frame_control) ||
+		   !(rt2x00dev->hw->conf.flags & IEEE80211_CONF_PS)))
+		return;
+
+	/* min. beacon length + FCS_LEN */
+	if (skb->len <= 40 + FCS_LEN)
+		return;
+
+	/* and only beacons from the associated BSSID, please */
+	if (!(rxdesc->dev_flags & RXDONE_MY_BSS) ||
+	    !rt2x00dev->aid)
+		return;
+
+	rt2x00dev->last_beacon = jiffies;
+
+	tim = rt2x00lib_find_ie(skb->data, skb->len - FCS_LEN, WLAN_EID_TIM);
+	if (!tim)
+		return;
+
+	if (tim[1] < sizeof(*tim_ie))
+		return;
+
+	tim_len = tim[1];
+	tim_ie = (struct ieee80211_tim_ie *) &tim[2];
+
+	/* Check whenever the PHY can be turned off again. */
+
+	/* 1. What about buffered unicast traffic for our AID? */
+	cam = ieee80211_check_tim(tim_ie, tim_len, rt2x00dev->aid);
+
+	/* 2. Maybe the AP wants to send multicast/broadcast data? */
+	cam |= (tim_ie->bitmap_ctrl & 0x01);
+
+	if (!cam && !test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
+		rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf,
+				 IEEE80211_CONF_CHANGE_PS);
+}
+
 static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev,
 					struct rxdone_entry_desc *rxdesc)
 {
@@ -531,6 +612,12 @@ void rt2x00lib_rxdone(struct queue_entry *entry)
 		rxdesc.flags |= RX_FLAG_HT;
 
 	/*
+	 * Check if this is a beacon, and more frames have been
+	 * buffered while we were in powersaving mode.
+	 */
+	rt2x00lib_rxdone_check_ps(rt2x00dev, entry->skb, &rxdesc);
+
+	/*
 	 * Update extra components
 	 */
 	rt2x00link_update_stats(rt2x00dev, entry->skb, &rxdesc);
@@ -1017,6 +1104,7 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
 	}
 
 	INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
+	INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup);
 
 	/*
 	 * Let the driver probe the device to detect the capabilities.
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index cb208d589ff..39e1052123e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -170,19 +170,22 @@ struct rt2x00_async_read_data {
 	__le32 reg;
 	struct usb_ctrlrequest cr;
 	struct rt2x00_dev *rt2x00dev;
-	void (*callback)(struct rt2x00_dev *,int,u32);
+	bool (*callback)(struct rt2x00_dev *, int, u32);
 };
 
 static void rt2x00usb_register_read_async_cb(struct urb *urb)
 {
 	struct rt2x00_async_read_data *rd = urb->context;
-	rd->callback(rd->rt2x00dev, urb->status, le32_to_cpu(rd->reg));
-	kfree(urb->context);
+	if (rd->callback(rd->rt2x00dev, urb->status, le32_to_cpu(rd->reg))) {
+		if (usb_submit_urb(urb, GFP_ATOMIC) < 0)
+			kfree(rd);
+	} else
+		kfree(rd);
 }
 
 void rt2x00usb_register_read_async(struct rt2x00_dev *rt2x00dev,
 				   const unsigned int offset,
-				   void (*callback)(struct rt2x00_dev*,int,u32))
+				   bool (*callback)(struct rt2x00_dev*, int, u32))
 {
 	struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
 	struct urb *urb;
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index 64be34f612f..323ca7b2b09 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -349,10 +349,12 @@ int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev,
  * be called from atomic context.  The callback will be called
  * when the URB completes. Otherwise the function is similar
  * to rt2x00usb_register_read().
+ * When the callback function returns false, the memory will be cleaned up,
+ * when it returns true, the urb will be fired again.
  */
 void rt2x00usb_register_read_async(struct rt2x00_dev *rt2x00dev,
 				   const unsigned int offset,
-				   void (*callback)(struct rt2x00_dev*,int,u32));
+				   bool (*callback)(struct rt2x00_dev*, int, u32));
 
 /*
  * Radio handlers
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index a6ce7d6cbdf..ad20953cbf0 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2209,6 +2209,7 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 	if (!modparam_nohwcrypt)
 		__set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
 	__set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
+	__set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
 
 	/*
 	 * Set the rssi offset.