[PATCH] mac80211: revamp interface and filter configuration

Drivers are currently supposed to keep track of monitor
interfaces if they allow so-called "hard" monitor, and
they are also supposed to keep track of multicast etc.

This patch changes that, replaces the set_multicast_list()
callback with a new configure_filter() callback that takes
filter flags (FIF_*) instead of interface flags (IFF_*).
For a driver, this means it should open the filter as much
as necessary to get all frames requested by the filter flags.
Accordingly, the filter flags are named "positively", e.g.
FIF_ALLMULTI.

Multicast filtering is a bit special in that drivers that
have no multicast address filters need to allow multicast
frames through when either the FIF_ALLMULTI flag is set or
when the mc_count value is positive.

At the same time, drivers are no longer notified about
monitor interfaces at all, this means they now need to
implement the start() and stop() callbacks and the new
change_filter_flags() callback. Also, the start()/stop()
ordering changed, start() is now called *before* any
add_interface() as it really should be, and stop() after
any remove_interface().

The patch also changes the behaviour of setting the bssid
to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING
is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed
and the filter flag FIF_BCN_PRBRESP_PROMISC introduced.
This is a lot more efficient for hardware like b43 that
supports it and other hardware can still set the BSSID
to all-ones.

Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu
(rtl8187, adm8211, and p54), Larry Finger (b43legacy), and
Ivo van Doorn (rt2x00).

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 110 insertions, 19 deletions

diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index bf9f0cc5a64..b0a92f543da 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -41,6 +41,57 @@ static struct usb_device_id rtl8187_table[] __devinitdata = {
 
 MODULE_DEVICE_TABLE(usb, rtl8187_table);
 
+static void rtl8187_iowrite_async_cb(struct urb *urb)
+{
+	kfree(urb->context);
+	usb_free_urb(urb);
+}
+
+static void rtl8187_iowrite_async(struct rtl8187_priv *priv, __le16 addr,
+				  void *data, u16 len)
+{
+	struct usb_ctrlrequest *dr;
+	struct urb *urb;
+	struct rtl8187_async_write_data {
+		u8 data[4];
+		struct usb_ctrlrequest dr;
+	} *buf;
+
+	buf = kmalloc(sizeof(*buf), GFP_ATOMIC);
+	if (!buf)
+		return;
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb) {
+		kfree(buf);
+		return;
+	}
+
+	dr = &buf->dr;
+
+	dr->bRequestType = RTL8187_REQT_WRITE;
+	dr->bRequest = RTL8187_REQ_SET_REG;
+	dr->wValue = addr;
+	dr->wIndex = 0;
+	dr->wLength = cpu_to_le16(len);
+
+	memcpy(buf, data, len);
+
+	usb_fill_control_urb(urb, priv->udev, usb_sndctrlpipe(priv->udev, 0),
+			     (unsigned char *)dr, buf, len,
+			     rtl8187_iowrite_async_cb, buf);
+	usb_submit_urb(urb, GFP_ATOMIC);
+}
+
+static inline void rtl818x_iowrite32_async(struct rtl8187_priv *priv,
+					   __le32 *addr, u32 val)
+{
+	__le32 buf = cpu_to_le32(val);
+
+	rtl8187_iowrite_async(priv, cpu_to_le16((unsigned long)addr),
+			      &buf, sizeof(buf));
+}
+
 void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
 {
 	struct rtl8187_priv *priv = dev->priv;
@@ -125,6 +176,7 @@ static void rtl8187_rx_cb(struct urb *urb)
 	struct rtl8187_rx_hdr *hdr;
 	struct ieee80211_rx_status rx_status = { 0 };
 	int rate, signal;
+	u32 flags;
 
 	spin_lock(&priv->rx_queue.lock);
 	if (skb->next)
@@ -143,10 +195,11 @@ static void rtl8187_rx_cb(struct urb *urb)
 
 	skb_put(skb, urb->actual_length);
 	hdr = (struct rtl8187_rx_hdr *)(skb_tail_pointer(skb) - sizeof(*hdr));
-	skb_trim(skb, le16_to_cpu(hdr->len) & 0x0FFF);
+	flags = le32_to_cpu(hdr->flags);
+	skb_trim(skb, flags & 0x0FFF);
 
 	signal = hdr->agc >> 1;
-	rate = (le16_to_cpu(hdr->rate) >> 4) & 0xF;
+	rate = (flags >> 20) & 0xF;
 	if (rate > 3) {	/* OFDM rate */
 		if (signal > 90)
 			signal = 90;
@@ -169,6 +222,8 @@ static void rtl8187_rx_cb(struct urb *urb)
 	rx_status.channel = dev->conf.channel;
 	rx_status.phymode = dev->conf.phymode;
 	rx_status.mactime = le64_to_cpu(hdr->mac_time);
+	if (flags & (1 << 13))
+		rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
 	ieee80211_rx_irqsafe(dev, skb, &rx_status);
 
 	skb = dev_alloc_skb(RTL8187_MAX_RX);
@@ -293,8 +348,6 @@ static int rtl8187_init_hw(struct ieee80211_hw *dev)
 	rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
 
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-	for (i = 0; i < ETH_ALEN; i++)
-		rtl818x_iowrite8(priv, &priv->map->MAC[i], priv->hwaddr[i]);
 
 	rtl818x_iowrite16(priv, (__le16 *)0xFFF4, 0xFFFF);
 	reg = rtl818x_ioread8(priv, &priv->map->CONFIG1);
@@ -365,7 +418,7 @@ static void rtl8187_set_channel(struct ieee80211_hw *dev, int channel)
 	rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
 }
 
-static int rtl8187_open(struct ieee80211_hw *dev)
+static int rtl8187_start(struct ieee80211_hw *dev)
 {
 	struct rtl8187_priv *priv = dev->priv;
 	u32 reg;
@@ -383,16 +436,13 @@ static int rtl8187_open(struct ieee80211_hw *dev)
 	      RTL818X_RX_CONF_RX_AUTORESETPHY |
 	      RTL818X_RX_CONF_BSSID |
 	      RTL818X_RX_CONF_MGMT |
-	      RTL818X_RX_CONF_CTRL |
 	      RTL818X_RX_CONF_DATA |
 	      (7 << 13 /* RX FIFO threshold NONE */) |
 	      (7 << 10 /* MAX RX DMA */) |
 	      RTL818X_RX_CONF_BROADCAST |
-	      RTL818X_RX_CONF_MULTICAST |
 	      RTL818X_RX_CONF_NICMAC;
-	if (priv->mode == IEEE80211_IF_TYPE_MNTR)
-		reg |= RTL818X_RX_CONF_MONITOR;
 
+	priv->rx_conf = reg;
 	rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
 
 	reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
@@ -419,7 +469,7 @@ static int rtl8187_open(struct ieee80211_hw *dev)
 	return 0;
 }
 
-static int rtl8187_stop(struct ieee80211_hw *dev)
+static void rtl8187_stop(struct ieee80211_hw *dev)
 {
 	struct rtl8187_priv *priv = dev->priv;
 	struct rtl8187_rx_info *info;
@@ -445,28 +495,31 @@ static int rtl8187_stop(struct ieee80211_hw *dev)
 		usb_kill_urb(info->urb);
 		kfree_skb(skb);
 	}
-	return 0;
+	return;
 }
 
 static int rtl8187_add_interface(struct ieee80211_hw *dev,
 				 struct ieee80211_if_init_conf *conf)
 {
 	struct rtl8187_priv *priv = dev->priv;
+	int i;
 
-	/* NOTE: using IEEE80211_IF_TYPE_MGMT to indicate no mode selected */
-	if (priv->mode != IEEE80211_IF_TYPE_MGMT)
-		return -1;
+	if (priv->mode != IEEE80211_IF_TYPE_MNTR)
+		return -EOPNOTSUPP;
 
 	switch (conf->type) {
 	case IEEE80211_IF_TYPE_STA:
-	case IEEE80211_IF_TYPE_MNTR:
 		priv->mode = conf->type;
 		break;
 	default:
 		return -EOPNOTSUPP;
 	}
 
-	priv->hwaddr = conf->mac_addr ? conf->mac_addr : dev->wiphy->perm_addr;
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	for (i = 0; i < ETH_ALEN; i++)
+		rtl818x_iowrite8(priv, &priv->map->MAC[i],
+				 ((u8 *)conf->mac_addr)[i]);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
 
 	return 0;
 }
@@ -475,7 +528,7 @@ static void rtl8187_remove_interface(struct ieee80211_hw *dev,
 				     struct ieee80211_if_init_conf *conf)
 {
 	struct rtl8187_priv *priv = dev->priv;
-	priv->mode = IEEE80211_IF_TYPE_MGMT;
+	priv->mode = IEEE80211_IF_TYPE_MNTR;
 }
 
 static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
@@ -523,14 +576,52 @@ static int rtl8187_config_interface(struct ieee80211_hw *dev, int if_id,
 	return 0;
 }
 
+static void rtl8187_configure_filter(struct ieee80211_hw *dev,
+				     unsigned int changed_flags,
+				     unsigned int *total_flags,
+				     int mc_count, struct dev_addr_list *mc_list)
+{
+	struct rtl8187_priv *priv = dev->priv;
+
+	*total_flags = 0;
+
+	if (changed_flags & FIF_PROMISC_IN_BSS)
+		priv->rx_conf ^= RTL818X_RX_CONF_NICMAC;
+	if (changed_flags & FIF_ALLMULTI)
+		priv->rx_conf ^= RTL818X_RX_CONF_MULTICAST;
+	if (changed_flags & FIF_FCSFAIL)
+		priv->rx_conf ^= RTL818X_RX_CONF_FCS;
+	if (changed_flags & FIF_CONTROL)
+		priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
+	if (changed_flags & FIF_OTHER_BSS)
+		priv->rx_conf ^= RTL818X_RX_CONF_MONITOR;
+
+	if (mc_count > 0)
+		priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
+
+	if (priv->rx_conf & RTL818X_RX_CONF_NICMAC)
+		*total_flags |= FIF_PROMISC_IN_BSS;
+	if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST)
+		*total_flags |= FIF_ALLMULTI;
+	if (priv->rx_conf & RTL818X_RX_CONF_FCS)
+		*total_flags |= FIF_FCSFAIL;
+	if (priv->rx_conf & RTL818X_RX_CONF_CTRL)
+		*total_flags |= FIF_CONTROL;
+	if (priv->rx_conf & RTL818X_RX_CONF_MONITOR)
+		*total_flags |= FIF_OTHER_BSS;
+
+	rtl818x_iowrite32_async(priv, &priv->map->RX_CONF, priv->rx_conf);
+}
+
 static const struct ieee80211_ops rtl8187_ops = {
 	.tx			= rtl8187_tx,
-	.open			= rtl8187_open,
+	.start			= rtl8187_start,
 	.stop			= rtl8187_stop,
 	.add_interface		= rtl8187_add_interface,
 	.remove_interface	= rtl8187_remove_interface,
 	.config			= rtl8187_config,
 	.config_interface	= rtl8187_config_interface,
+	.configure_filter	= rtl8187_configure_filter,
 };
 
 static void rtl8187_eeprom_register_read(struct eeprom_93cx6 *eeprom)
@@ -604,7 +695,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 	priv->modes[1].rates = priv->rates;
 	priv->modes[1].num_channels = ARRAY_SIZE(rtl818x_channels);
 	priv->modes[1].channels = priv->channels;
-	priv->mode = IEEE80211_IF_TYPE_MGMT;
+	priv->mode = IEEE80211_IF_TYPE_MNTR;
 	dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
 		     IEEE80211_HW_RX_INCLUDES_FCS;
 	dev->extra_tx_headroom = sizeof(struct rtl8187_tx_hdr);