Merge branch 'master' into for-linus

1 files changed, 30 insertions, 17 deletions

diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index 87a95588a8e..2017ccc0014 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -32,6 +32,7 @@
 #ifdef CONFIG_RTL8187_LEDS
 #include "rtl8187_leds.h"
 #endif
+#include "rtl8187_rfkill.h"
 
 MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
 MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
@@ -220,7 +221,7 @@ static void rtl8187_tx_cb(struct urb *urb)
 		 * reading a register in the device. We are in interrupt mode
 		 * here, thus queue the skb and finish on a work queue. */
 		skb_queue_tail(&priv->b_tx_status.queue, skb);
-		queue_delayed_work(hw->workqueue, &priv->work, 0);
+		ieee80211_queue_delayed_work(hw, &priv->work, 0);
 	}
 }
 
@@ -380,7 +381,8 @@ static void rtl8187_rx_cb(struct urb *urb)
 	rx_status.flag |= RX_FLAG_TSFT;
 	if (flags & RTL818X_RX_DESC_FLAG_CRC32_ERR)
 		rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
-	ieee80211_rx_irqsafe(dev, skb, &rx_status);
+	memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
+	ieee80211_rx_irqsafe(dev, skb);
 
 	skb = dev_alloc_skb(RTL8187_MAX_RX);
 	if (unlikely(!skb)) {
@@ -647,10 +649,10 @@ static int rtl8187_init_hw(struct ieee80211_hw *dev)
 
 	/* setup card */
 	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
-	rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
+	rtl818x_iowrite8(priv, &priv->map->GPIO0, 0);
 
 	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
-	rtl818x_iowrite8(priv, &priv->map->GPIO, 1);
+	rtl818x_iowrite8(priv, &priv->map->GPIO0, 1);
 	rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
 
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
@@ -673,11 +675,11 @@ static int rtl8187_init_hw(struct ieee80211_hw *dev)
 
 	/* host_usb_init */
 	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
-	rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
+	rtl818x_iowrite8(priv, &priv->map->GPIO0, 0);
 	reg = rtl818x_ioread8(priv, (u8 *)0xFE53);
 	rtl818x_iowrite8(priv, (u8 *)0xFE53, reg | (1 << 7));
 	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
-	rtl818x_iowrite8(priv, &priv->map->GPIO, 0x20);
+	rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x20);
 	rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
 	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x80);
 	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x80);
@@ -909,12 +911,12 @@ static int rtl8187_start(struct ieee80211_hw *dev)
 	u32 reg;
 	int ret;
 
+	mutex_lock(&priv->conf_mutex);
+
 	ret = (!priv->is_rtl8187b) ? rtl8187_init_hw(dev) :
 				     rtl8187b_init_hw(dev);
 	if (ret)
-		return ret;
-
-	mutex_lock(&priv->conf_mutex);
+		goto rtl8187_start_exit;
 
 	init_usb_anchor(&priv->anchored);
 	priv->dev = dev;
@@ -941,8 +943,7 @@ static int rtl8187_start(struct ieee80211_hw *dev)
 				  (7 << 21 /* MAX TX DMA */));
 		rtl8187_init_urbs(dev);
 		rtl8187b_init_status_urb(dev);
-		mutex_unlock(&priv->conf_mutex);
-		return 0;
+		goto rtl8187_start_exit;
 	}
 
 	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
@@ -986,9 +987,10 @@ static int rtl8187_start(struct ieee80211_hw *dev)
 	reg |= RTL818X_CMD_RX_ENABLE;
 	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
 	INIT_DELAYED_WORK(&priv->work, rtl8187_work);
-	mutex_unlock(&priv->conf_mutex);
 
-	return 0;
+rtl8187_start_exit:
+	mutex_unlock(&priv->conf_mutex);
+	return ret;
 }
 
 static void rtl8187_stop(struct ieee80211_hw *dev)
@@ -1016,9 +1018,10 @@ static void rtl8187_stop(struct ieee80211_hw *dev)
 		dev_kfree_skb_any(skb);
 
 	usb_kill_anchored_urbs(&priv->anchored);
+	mutex_unlock(&priv->conf_mutex);
+
 	if (!priv->is_rtl8187b)
 		cancel_delayed_work_sync(&priv->work);
-	mutex_unlock(&priv->conf_mutex);
 }
 
 static int rtl8187_add_interface(struct ieee80211_hw *dev,
@@ -1197,10 +1200,16 @@ static void rtl8187_bss_info_changed(struct ieee80211_hw *dev,
 				 info->use_short_preamble);
 }
 
+static u64 rtl8187_prepare_multicast(struct ieee80211_hw *dev,
+				     int mc_count, struct dev_addr_list *mc_list)
+{
+	return mc_count;
+}
+
 static void rtl8187_configure_filter(struct ieee80211_hw *dev,
 				     unsigned int changed_flags,
 				     unsigned int *total_flags,
-				     int mc_count, struct dev_addr_list *mclist)
+				     u64 multicast)
 {
 	struct rtl8187_priv *priv = dev->priv;
 
@@ -1210,7 +1219,7 @@ static void rtl8187_configure_filter(struct ieee80211_hw *dev,
 		priv->rx_conf ^= RTL818X_RX_CONF_CTRL;
 	if (changed_flags & FIF_OTHER_BSS)
 		priv->rx_conf ^= RTL818X_RX_CONF_MONITOR;
-	if (*total_flags & FIF_ALLMULTI || mc_count > 0)
+	if (*total_flags & FIF_ALLMULTI || multicast > 0)
 		priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
 	else
 		priv->rx_conf &= ~RTL818X_RX_CONF_MULTICAST;
@@ -1273,8 +1282,10 @@ static const struct ieee80211_ops rtl8187_ops = {
 	.remove_interface	= rtl8187_remove_interface,
 	.config			= rtl8187_config,
 	.bss_info_changed	= rtl8187_bss_info_changed,
+	.prepare_multicast	= rtl8187_prepare_multicast,
 	.configure_filter	= rtl8187_configure_filter,
-	.conf_tx		= rtl8187_conf_tx
+	.conf_tx		= rtl8187_conf_tx,
+	.rfkill_poll		= rtl8187_rfkill_poll
 };
 
 static void rtl8187_eeprom_register_read(struct eeprom_93cx6 *eeprom)
@@ -1514,6 +1525,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 	reg &= 0xFF;
 	rtl8187_leds_init(dev, reg);
 #endif
+	rtl8187_rfkill_init(dev);
 
 	return 0;
 
@@ -1537,6 +1549,7 @@ static void __devexit rtl8187_disconnect(struct usb_interface *intf)
 #ifdef CONFIG_RTL8187_LEDS
 	rtl8187_leds_exit(dev);
 #endif
+	rtl8187_rfkill_exit(dev);
 	ieee80211_unregister_hw(dev);
 
 	priv = dev->priv;