drivers/net/wireless: Restore upper case words in wiphy_<level> messages

Commit c96c31e499b70964cfc88744046c998bb710e4b8
"(drivers/net/wireless: Use wiphy_<level>)"
inadvertently changed some upper case words to
lower case.  Restore the original case.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

3 files changed, 7 insertions, 7 deletions

diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c
index b50c39aaec0..30107ce78df 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c
@@ -445,7 +445,7 @@ static int rtl8180_init_rx_ring(struct ieee80211_hw *dev)
 					     &priv->rx_ring_dma);
 
 	if (!priv->rx_ring || (unsigned long)priv->rx_ring & 0xFF) {
-		wiphy_err(dev->wiphy, "cannot allocate rx ring\n");
+		wiphy_err(dev->wiphy, "Cannot allocate RX ring\n");
 		return -ENOMEM;
 	}
 
@@ -502,7 +502,7 @@ static int rtl8180_init_tx_ring(struct ieee80211_hw *dev,
 
 	ring = pci_alloc_consistent(priv->pdev, sizeof(*ring) * entries, &dma);
 	if (!ring || (unsigned long)ring & 0xFF) {
-		wiphy_err(dev->wiphy, "cannot allocate tx ring (prio = %d)\n",
+		wiphy_err(dev->wiphy, "Cannot allocate TX ring (prio = %d)\n",
 			  prio);
 		return -ENOMEM;
 	}
@@ -568,7 +568,7 @@ static int rtl8180_start(struct ieee80211_hw *dev)
 	ret = request_irq(priv->pdev->irq, rtl8180_interrupt,
 			  IRQF_SHARED, KBUILD_MODNAME, dev);
 	if (ret) {
-		wiphy_err(dev->wiphy, "failed to register irq handler\n");
+		wiphy_err(dev->wiphy, "failed to register IRQ handler\n");
 		goto err_free_rings;
 	}
 
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index 5738a55c1b0..98e0351c1dd 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -573,7 +573,7 @@ static int rtl8187_cmd_reset(struct ieee80211_hw *dev)
 	} while (--i);
 
 	if (!i) {
-		wiphy_err(dev->wiphy, "reset timeout!\n");
+		wiphy_err(dev->wiphy, "Reset timeout!\n");
 		return -ETIMEDOUT;
 	}
 
@@ -1526,7 +1526,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 	mutex_init(&priv->conf_mutex);
 	skb_queue_head_init(&priv->b_tx_status.queue);
 
-	wiphy_info(dev->wiphy, "hwaddr %pm, %s v%d + %s, rfkill mask %d\n",
+	wiphy_info(dev->wiphy, "hwaddr %pM, %s V%d + %s, rfkill mask %d\n",
 		   mac_addr, chip_name, priv->asic_rev, priv->rf->name,
 		   priv->rfkill_mask);
 
diff --git a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
index fd96f911232..97eebdcf7eb 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
@@ -366,7 +366,7 @@ static void rtl8225_rf_init(struct ieee80211_hw *dev)
 		rtl8225_write(dev, 0x02, 0x044d);
 		msleep(100);
 		if (!(rtl8225_read(dev, 6) & (1 << 7)))
-			wiphy_warn(dev->wiphy, "rf calibration failed! %x\n",
+			wiphy_warn(dev->wiphy, "RF Calibration Failed! %x\n",
 				   rtl8225_read(dev, 6));
 	}
 
@@ -735,7 +735,7 @@ static void rtl8225z2_rf_init(struct ieee80211_hw *dev)
 		rtl8225_write(dev, 0x02, 0x044D);
 		msleep(100);
 		if (!(rtl8225_read(dev, 6) & (1 << 7)))
-			wiphy_warn(dev->wiphy, "rf calibration failed! %x\n",
+			wiphy_warn(dev->wiphy, "RF Calibration Failed! %x\n",
 				   rtl8225_read(dev, 6));
 	}