summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/rtl818x
diff options
context:
space:
mode:
authorLarry Finger <Larry.Finger@lwfinger.net>2009-12-05 19:25:22 -0600
committerJohn W. Linville <linville@tuxdriver.com>2009-12-07 16:55:00 -0500
commit70d57139f932b9ca21026253d02af71cf53d764a (patch)
tree3aa334d51a8105a80e97e3775b99e15db990acfd /drivers/net/wireless/rtl818x
parent815833e7ecf0b9a017315cae6aef4d7cd9517681 (diff)
rtl8187: Fix wrong rfkill switch mask for some models
There are different bits used to convey the setting of the rfkill switch to the driver. The current driver only supports one of these possibilities. These changes were derived from the latest version of the vendor driver. This patch fixes the regression noted in kernel Bugzilla #14743. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-and-tested-by: Antti Kaijanmäki <antti@kaijanmaki.net> Tested-by: Hin-Tak Leung <hintak.leung@gmail.com> Cc: Stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/rtl818x')
-rw-r--r--drivers/net/wireless/rtl818x/rtl8187.h5
-rw-r--r--drivers/net/wireless/rtl818x/rtl8187_dev.c12
-rw-r--r--drivers/net/wireless/rtl818x/rtl8187_rfkill.c4
3 files changed, 17 insertions, 4 deletions
diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h
index abb4907cf29..b1a24de0b7b 100644
--- a/drivers/net/wireless/rtl818x/rtl8187.h
+++ b/drivers/net/wireless/rtl818x/rtl8187.h
@@ -23,6 +23,7 @@
#define RTL8187_EEPROM_TXPWR_CHAN_1 0x16 /* 3 channels */
#define RTL8187_EEPROM_TXPWR_CHAN_6 0x1B /* 2 channels */
#define RTL8187_EEPROM_TXPWR_CHAN_4 0x3D /* 2 channels */
+#define RTL8187_EEPROM_SELECT_GPIO 0x3B
#define RTL8187_REQT_READ 0xC0
#define RTL8187_REQT_WRITE 0x40
@@ -31,6 +32,9 @@
#define RTL8187_MAX_RX 0x9C4
+#define RFKILL_MASK_8187_89_97 0x2
+#define RFKILL_MASK_8198 0x4
+
struct rtl8187_rx_info {
struct urb *urb;
struct ieee80211_hw *dev;
@@ -122,6 +126,7 @@ struct rtl8187_priv {
u8 noise;
u8 slot_time;
u8 aifsn[4];
+ u8 rfkill_mask;
struct {
__le64 buf;
struct sk_buff_head queue;
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index 76973b8c709..bc5726dd5fe 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -1322,6 +1322,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
struct ieee80211_channel *channel;
const char *chip_name;
u16 txpwr, reg;
+ u16 product_id = le16_to_cpu(udev->descriptor.idProduct);
int err, i;
dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8187_ops);
@@ -1481,6 +1482,13 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
(*channel++).hw_value = txpwr & 0xFF;
(*channel++).hw_value = txpwr >> 8;
}
+ /* Handle the differing rfkill GPIO bit in different models */
+ priv->rfkill_mask = RFKILL_MASK_8187_89_97;
+ if (product_id == 0x8197 || product_id == 0x8198) {
+ eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_SELECT_GPIO, &reg);
+ if (reg & 0xFF00)
+ priv->rfkill_mask = RFKILL_MASK_8198;
+ }
/*
* XXX: Once this driver supports anything that requires
@@ -1509,9 +1517,9 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
mutex_init(&priv->conf_mutex);
skb_queue_head_init(&priv->b_tx_status.queue);
- printk(KERN_INFO "%s: hwaddr %pM, %s V%d + %s\n",
+ printk(KERN_INFO "%s: hwaddr %pM, %s V%d + %s, rfkill mask %d\n",
wiphy_name(dev->wiphy), dev->wiphy->perm_addr,
- chip_name, priv->asic_rev, priv->rf->name);
+ chip_name, priv->asic_rev, priv->rf->name, priv->rfkill_mask);
#ifdef CONFIG_RTL8187_LEDS
eeprom_93cx6_read(&eeprom, 0x3F, &reg);
diff --git a/drivers/net/wireless/rtl818x/rtl8187_rfkill.c b/drivers/net/wireless/rtl818x/rtl8187_rfkill.c
index cad8037ab2a..03555e1e0ca 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_rfkill.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_rfkill.c
@@ -25,10 +25,10 @@ static bool rtl8187_is_radio_enabled(struct rtl8187_priv *priv)
u8 gpio;
gpio = rtl818x_ioread8(priv, &priv->map->GPIO0);
- rtl818x_iowrite8(priv, &priv->map->GPIO0, gpio & ~0x02);
+ rtl818x_iowrite8(priv, &priv->map->GPIO0, gpio & ~priv->rfkill_mask);
gpio = rtl818x_ioread8(priv, &priv->map->GPIO1);
- return gpio & 0x02;
+ return gpio & priv->rfkill_mask;
}
void rtl8187_rfkill_init(struct ieee80211_hw *hw)