net: convert print_mac to %pM

This converts pretty much everything to print_mac. There were
a few things that had conflicts which I have just dropped for
now, no harm done.

I've built an allyesconfig with this and looked at the files
that weren't built very carefully, but it's a huge patch.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 10 insertions, 20 deletions

diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index e124b1d6267..7bf445895a8 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -1020,7 +1020,6 @@ wv_82593_reconfig(struct net_device *	dev)
 static void
 wv_psa_show(psa_t *	p)
 {
-  DECLARE_MAC_BUF(mac);
   printk(KERN_DEBUG "##### wavelan psa contents: #####\n");
   printk(KERN_DEBUG "psa_io_base_addr_1: 0x%02X %02X %02X %02X\n",
 	 p->psa_io_base_addr_1,
@@ -1034,13 +1033,10 @@ wv_psa_show(psa_t *	p)
   printk(KERN_DEBUG "psa_holi_params: 0x%02x, ", p->psa_holi_params);
   printk("psa_int_req_no: %d\n", p->psa_int_req_no);
 #ifdef DEBUG_SHOW_UNUSED
-  printk(KERN_DEBUG "psa_unused0[]: %s\n",
-	 print_mac(mac, p->psa_unused0));
+  printk(KERN_DEBUG "psa_unused0[]: %pM\n", p->psa_unused0);
 #endif	/* DEBUG_SHOW_UNUSED */
-  printk(KERN_DEBUG "psa_univ_mac_addr[]: %s\n",
-	 print_mac(mac, p->psa_univ_mac_addr));
-  printk(KERN_DEBUG "psa_local_mac_addr[]: %s\n",
-	 print_mac(mac, p->psa_local_mac_addr));
+  printk(KERN_DEBUG "psa_univ_mac_addr[]: %pM\n", p->psa_univ_mac_addr);
+  printk(KERN_DEBUG "psa_local_mac_addr[]: %pM\n", p->psa_local_mac_addr);
   printk(KERN_DEBUG "psa_univ_local_sel: %d, ", p->psa_univ_local_sel);
   printk("psa_comp_number: %d, ", p->psa_comp_number);
   printk("psa_thr_pre_set: 0x%02x\n", p->psa_thr_pre_set);
@@ -1238,12 +1234,11 @@ wv_packet_info(u_char *		p,		/* Packet to dump */
 {
   int		i;
   int		maxi;
-  DECLARE_MAC_BUF(mac);
 
-  printk(KERN_DEBUG "%s: %s(): dest %s, length %d\n",
-	 msg1, msg2, print_mac(mac, p), length);
-  printk(KERN_DEBUG "%s: %s(): src %s, type 0x%02X%02X\n",
-	 msg1, msg2, print_mac(mac, &p[6]), p[12], p[13]);
+  printk(KERN_DEBUG "%s: %s(): dest %pM, length %d\n",
+	 msg1, msg2, p, length);
+  printk(KERN_DEBUG "%s: %s(): src %pM, type 0x%02X%02X\n",
+	 msg1, msg2, &p[6], p[12], p[13]);
 
 #ifdef DEBUG_PACKET_DUMP
 
@@ -1274,7 +1269,6 @@ wv_init_info(struct net_device *	dev)
 {
   unsigned int	base = dev->base_addr;
   psa_t		psa;
-  DECLARE_MAC_BUF(mac);
 
   /* Read the parameter storage area */
   psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
@@ -1291,10 +1285,8 @@ wv_init_info(struct net_device *	dev)
 
 #ifdef DEBUG_BASIC_SHOW
   /* Now, let's go for the basic stuff */
-  printk(KERN_NOTICE "%s: WaveLAN: port %#x, irq %d, "
-	 "hw_addr %s",
-	 dev->name, base, dev->irq,
-	 print_mac(mac, dev->dev_addr));
+  printk(KERN_NOTICE "%s: WaveLAN: port %#x, irq %d, hw_addr %pM",
+	 dev->name, base, dev->irq, dev->dev_addr);
 
   /* Print current network id */
   if(psa.psa_nwid_select)
@@ -3647,12 +3639,10 @@ wv_82593_config(struct net_device *	dev)
       int			addrs_len = WAVELAN_ADDR_SIZE * lp->mc_count;
 
 #ifdef DEBUG_CONFIG_INFO
-      DECLARE_MAC_BUF(mac);
       printk(KERN_DEBUG "%s: wv_hw_config(): set %d multicast addresses:\n",
 	     dev->name, lp->mc_count);
       for(dmi=dev->mc_list; dmi; dmi=dmi->next)
-	printk(KERN_DEBUG " %s\n",
-	       print_mac(mac, dmi->dmi_addr));
+	printk(KERN_DEBUG " %pM\n", dmi->dmi_addr);
 #endif
 
       /* Initialize adapter's ethernet multicast addresses */